You are on page 1of 139

Urinalysis Workarea

Information Management System U-WAM


ASTM Host Online Specifications

Revision 21
Revision History
Revision Date Content Revised
1 - Initial Version

2 December 19, 2014 Corrected erroneous description

3 August 26, 2015 Revised for release of drawings.

4 December 11, 2015 Revised for U-WAM Ver00-03 compatibility.


• Descriptions related with urine chemistry, visual examination, and
particle classification are added to “6. Example of
Communication” and “Appendix B. Analysis Parameters”.
• A communication example of review comments is added to “6.2.2
Urine sediment analysis results”.
• Descriptions related with urine chemistry analyzers and particle
digital imaging devices are added to “B.7 QC Parameters”.
• ASCII format description for “O” is added to the ASTM field
“8.4.26 Report Type” in “5.3.3.3. Analysis Order Record”.
• Remarks of the ASTM field “9.7 Analysis Result Record Abnormal
Flag” in “5.3.3.4. Analysis Result Record” is modified.
• Notes are added to each section of “Appendix B. Analysis
Parameters”.
• Descriptions of available profiles are added to “Appendix G.
Units”.
5 February 26, 2016 Revised for U-WAM ver00-04 compatibility.
• Descriptions related with two ports are added to “5.2. Data Link
Layer (Transmission Protocol)”.
• “5.3.2.2. Order inquiry (U-WAM → host computer)” is added.
• Research parameters and research information are added to the
result type “S” described in “5.3.3.4. Analysis Result Record”.
• “5.3.3.6. Inquiry record” is added.
• Note that the parameters may not be output depending on the
setting of U-WAM is added to “Appendix B. Analysis
Parameters”.
• SI units description is added to “B.1 Urine Chemistry (Profile:
Chemistry)”.
• “Normal” is corrected to “normal” for data value (qualitative) of
urobilinogen in “B.1 Urine Chemistry (Profile: Chemistry)”.
• “WBC Clumps, Squa.EC, Non SEC, Tran.EC, RTEC, and
Hy.CAST” are deleted from the flags for UF-4000 (North
America) and UF-5000 (North America) in “B.2 Urine Sediment
(Profile: UF)”.
• Research parameters are added to “B.2 Urine Sediment (Profile:
UF)”.
• “WBC Clumps, Squa.EC, Non SEC, Tran.EC, RTEC, and
Hy.CAST” are deleted from the reportable parameter flags for UF -
4000 (North America) and UF-5000 (North America) in “B.2 Urine
Sediment (Profile: UF)”.
• Parameters in “B.1 Urine Chemistry (Profile: Chemistry)” are
sorted according to the order of transmission to host.
• Note that the result value may be changed depending on the
laboratory is added to “B.4 Particle Classification (Profile:
Particle Classification)”.
• Research parameters are added to “B.5 Body Fluid (Profile: BF)”.
• Parameters for China are deleted from “B.5 Body Fluid (Profile:
BF)”.
• Units for semi-quantitative values are deleted in “B.3 Visual
examination (Profile: Visual)”, “B.4 Particle Classification
(Profile: Particle Classification)”, and “B.6 Body Fluid Visual
Examination (Profile: Visual body fluid)”.
• “Appendix C. Research Information” is added.
• SPERM CarryOver and RBC YLC fraction error are a dded to
“Appendix D. Review Comments”.
• Note that the values in “Name for host transmission” column are
fixed in QC parameters is added to “F.1 Reportable Parameters
and Research Parameters (Result Type “S”)”.
• Column name “Parameter ID” is corrected to “Name for host
transmission” as default names for host transmission in “F.1
Reportable Parameters and Research Parameters (Result Type
“S”)”.
• “F.2 Research Information (Result Type “S”)” is added.
• Descriptions of µmol/L, mmol/L, g/L, and c/µL are added to
“Appendix H. Units”.
• Output Specifications of chemistry abnormal flag (! ? *) is added
to “9.7 Analysis Result Record Abnormal Flag”.
6 June 3, 2016 • It was added to supplementary information to
RC_SPERM_CarryOver.(Appendix D. Review Comments)
• It was added to qualitative and semi-quantitative specification to “B.7
QC Parameters”.
• It was added to chemistry QC analysis results example to 6.2.6QC
analysis results.
• It was added to configuration information of the two -port
communication to 5.2Data Link Layer (Transmission Protocol).
• It was added to explanation of download mode and query mode to
5.3.2Communication protocol.
7 September 9 2016 • Error description of “5.3.2.2 Order inquiry (U-WAM → host
computer)” is corrected.
• It is added to 9.14 Instrument ID in “5.3.3.4. Analysis Result Record”
that analyzer name differs depending on the setting of U -WAM.
• Error descriptions concerning parameter ID and name for host
transmission for crystal are corrected.
• It is added to 9.14 Instrument ID in “5.3.3.4. Analysis Result Record”
that analyzer name differs depending on the setting of U -WAM.
• Analysis result completed to output by user operation or setting of
U-WAM is output to “5.3.3.4. Analysis Result Record” at the same
time.
• It is added to “5.3.3.4. Analysis Result Record” that output pattern
of result format of analysis result record d iffers depending on the
setting of U-WAM.
• Specifications of report comment in “5.3.3.5. Comment Record
(Report Comments, Patient Comments, Sample Comments)” is
corrected, and maximum number of bytes in 10.4 Comment Text is
corrected.
• Analyzer information is added to 11.1.13 Requested Information
Status Codes in “5.3.3.6. Inquiry record”.
• “5.3.3.7. Scientific Information Record” is added.
• “6.3.1. QC Lot Information Output” is added.
• Double quotes are corrected to single quotes about name for host
transmission name for crystal in “Appendix B. Analysis Parameters”.
• Φ in the parameter name of “Appendix B. Analysis Parameters” is
corrected as phi.
• Error code is added to “B.1 Urine Chemistry (Profile:
Chemistry)”.
• Atpical.C is added to “B.2 Urine Sediment (Profile: UF)”.
• Data value and ul unit is added to result value type (quantitative)
of “B.3. Visual examination (Profile: Visual)”, and significant
digits of result value type (quantitative) is added to <Notes>.
• Significant digits of result value type (quantitative) of <Notes> in
“B.4 Particle Classification (Profile: Particle Classification)” is
corrected.
• The name for host transmission of BLD parameter in “B.7 QC
Parameters” is corrected from [BLD] to [BLD_H].
• “Appendix K. Quality Control Lot Information” is added to
Appendix.
• “Appendix L. Qualitative Instrument Error Code Comparison
Table” is added.
• Sample numbers of QC materials in “5.3.3.3.Analysis Order
Record” is corrected.
8 December 26 2016 • ASTM E1381-95 mode specifications is added to
“5.Communication Specifications”.
•Communication example of ASTM E 1381-95 mode is added to
“6.Example of Communication”.
• In “5.3.3.4. Analysis Result Record”, in case of Quality Control
result, add that rack number, rack position, operator ID are not
output.
• In “5.3.3.4. Analysis Result Record”, in the case of the Quality
Control result, add that all the result value types of the Chemistry
device may be output.
• In “5.3.3.4. Analysis Result Record”, in the case of the Quality
Control result, add that the output specification is different from
the Qualitative device and other than Qualitative device.
•Add rule of escape character used for file path to “Appendix G.
Shared Folder for Scatter Images“
9 March 8 2017 • Error description of 7.6Patient Name in “5.3.3.2.Patient
Information Record” is corrected.
• Changed the following analysis parameters of UF-4000 (China)
and UF-5000 (China) in “B.2. Urine Sediment (Profile: UF)” from
semi-quantitative to qualitative (Non SEC, Hy.CAST, Path.CAST,
X'TAL, YLC, SPERM)
• Added s.g parameter to “B.1. Urine Chemistry (Profile:
Chemistry)”, “B.7. QC Parameters”
• Added text on the Result setting for display units of QC results to
“5.3.3.4. Analysis Result Record”
• Added explanation to “B.1. Urine Chemistry (Profile: Chemistry)”
that a qualitative value may be output when the semi-quantitative
value result is blank due to the U-WAM setting.
• Added UC-1000 to “B.1. Urine Chemistry (Profile: Chemistry)”
• Corrected A/C of UC/US in “B.1. Urine Chemistry (Profile:
Chemistry)”
• Added error code “8060”to “Appendix K. Qualitative Instrument
Error Code Comparison Table”
• Added conversion rules for analysis result abnormal flags to
“5.3.3.4. Analysis Result Record”
•Added result type “RP” to “5.3.3.4. Analysis Result Record”
10 May 16 2017 • Added China as the destination to the host transmission name to
“B.1 Urine Chemistry (Profile: Chemistry)”.
•Added the result output specification to “B.2 Urine Sediment
(Profile: UF)” to use when an out of range error occurs in the urine
quantitative analyzer.
• Added the rack number output specification for order records to
“5.3.3.3 Analysis Order Record”
• Corrected the official name of “B.2 Urine Sediment (Profile: UF)”
from “yeast” to “yeast-like cell”
• Added an example of a sample number for the case of a sample
number read error to “5.3.3.3 Analysis Order Record”
• Added a control level output specification for quantitative quality
control to “5.3.3.3 Analysis Order Record”
• Added the fact that result type is not output for some parameters to
“5.3.3.4 Analysis Result Record”.
• Added information about sample numbers and order numbers to
“5.3.2.1 Analysis order information (host computer → U-WAM)”.
• Delete use restriction of query mode in ASTM E 1381 -95 mode in
“4.3.2 Communication protocol”
11 September 8, 2017 • Added new item to “B.3. Visual (Profile: Visual) ”.
• Added new item to “B.4. Particle Classification (Profile: Particle
Classification) ”.
• Added new item to “B.6. Visual Body Fluid (Profile: Visual Body
Fluid) ”.
• Changed number of digits output for BACT from “0.0 to
99999.9” to “0.0 to 9999999.9” in “B.2. Urine Quantitative
(Profile: UF) ”.
• Added Through Mode to “5.3.2 Communication protocol”.
• Added the sample number to urgent sample output in “5.3.2.1
Analysis order information (host computer → U-WAM) ”.
• Added Taiwan destination to “B. 1 Urine Sediment (Profile:
UF) ”.
• Added Taiwan destination to “B. 5 Body Fluid (Profile: BF) ”.
• Added new item to “B.3. Visual (Profile: Visual) ”.
• Added cautions when connecting to U-WAM to “4 Cautions when
connecting to U-WAM”.
• Added barcode scanning error samples and samples without an ID
to “5.3.3.3 Analysis Order Record”.
12 November 17, • Corrected erroneous description in “6 Example of
2017 Communication”
• In “5.3.1.3 Fields”, added reference to scatter file path
conversion example
• Corrected erroneous description in “Appendix G. Shared Folder
for Scatter Images”
• Added supplemental explanation regarding urgent samples to
“5.3.3.3 Analysis Order Record”
• Added limitations regarding unknown patient date of birth to
“5.3.3.2 Patient Information Record”
• Added explanation that U-WAM settings may prevent output of
items without an entered result to “B.3 Visual (Profile: Visual)”,
“B.4 Particle Classification (Profile: Particle Classification)”,
“B.6. Visual Body Fluid (Profile: Visual Body Fluid)”
• In “5.3.3.4 Analysis Result Record”, added explanation that U-
WAM settings may cause the output pattern of the result format
of qualitative QC results in the result record to change
• Deleted erroneous explanation regarding SI units in “B.7. QC
Parameters <UC US-Control>”
13 March 6, 2018 • In “5.3.2.2Order inquiry (U-WAM → host computer)”, added
explanation that inquiry timing.

14 2018/05/24 ・ In B.2 Urine Sediment (Profile: UF),


Modify<UF-4000/5000 Research Parameters> for China.
Add Research Parameters.
~WBC Clumps
~Non SEC
~Hy.CAST
~Path.CAST
~X'TAL
~YLC
~SPERM
~MUCUS
<Note>*6 is added.
15 2018/08/27 ・ In 5.3.3.Details of Records, Added necessary registration field
information of Host → U-WAM.
・ In 5.3.3.4.Analysis Result Record, Add content about LH flag.
・ Add UF-3000x to the following chapter.
5.3.3.3.Analysis Order Record
Appendix B. Analysis Parameters
Appendix C. Research Information
Appendix D. Review Comments
・ In B.2 Urine Sediment (Profile: UF), Add the following items.
~RBC-P70Fsc
~RBC-Fsc-DW
~Large RBC
~Small RBC
・ In B.7 QC Parameters<UC-Control>, Add SI unit.
・ In 5.3.3.3.Analysis Order Record, Add the following statement.
In case of U-WAM Ver.00-14 or later, not need the combined
order number and sample number must be unique.
16 2019/02/19 • In “5.3.3.4 Analysis Result Record”, added the UD-10
Measurement mode is output for the Dilution Ratio.
• Note added to 9.4 Data Value in “5.3.3.4 Analysis Result
Record”.
• Modify the communication example in “6.2.2 Urine sediment
analysis results”.
• Modify the communication example in “6.2.5 Body fluid sample
analysis results”.
• New scatter “CW_SSH_PxCW_FLL_P” and “HIST_CW_SSH_P”
were added to “Appendix E. Scatter Images”.
• The following was added to the list of items in “Appendix B.
Analysis Parameters”.
- Scattergram and histogram items added to “sediment<UF-
3000, 3000x, 4000, 5000 >”
- Scattergram and histogram items added to “body fluid<UF-
3000, 3000x, 4000, 5000 >”
- Note(*3.1) was added to “sediment<UF-3000, 3000x, 4000,
5000 >”
• “Appendix B. Analysis Parameters”
- Change the host transmission name (default) of Visual
examination and Particle Classification as follows.
“Visual examination”
M-WAXy Casts→ M-WAXY Casts
M-Intranculear→ M-Intracellular
M-Colesterol→ M-Cholesterol
“Particle Classification”
P-WAXy Casts→ P-WAXY Casts
P-Intranculear→ P-Intracellular
P-Colesterol→ P-Cholesterol
• “Appendix D. Review Comments”
Addition of “D.1 Urine Sediment (Profile: UF)” and “D.2 Body
Fluid (Profile: BF)” to Body Fluid Review Comments.
17 2019/05/27 ・ In “5.3.3.4 Analysis Result Record”,add the measurement cell
information of UD-10 is output for 9.9 measurement result status.
・ In “5.3.3.4 Analysis Result Record”, add the instrument name of
UD-10
・ Appendix B. Analysis Parameters
Add the following items for < UF-3000、 3000x、 4000、
5000> in other and other(Taiwan)
~RBC-P70Fsc
~RBC-Fsc-DW
~Large RBC
~Small RBC
・ ”Appendix D. Review Comment,“
Add a table D.2 Body Fluid (Profile: BF) <UF-3000/3000x>
Add new review comment ” RC_WBCLowReliability”
・ Appendix G. Shared Folder for Scatter Images
Added expiration date for scatter files.
18 2019/08/06 Appendix K. Qualitative Instrument Error Code Comparison Table
Correct incorrect entries
Separate error code table for UC-3500 and UC-1000
19 2019/11/27 ・ In 6.Example of communication,ccorrect incorrect entries
・ In “5.3.3.2 Patient Information Record”, a maximum of 16 digits
of alpha-numeric and a hyphen "-" (2Dh) can be set.
20 2020/01/29 ・ Added that the user ID / user name that saved the visual result
is output to "9.11 Operator ID" of "5.3.3.4 Result Record"
Added that the user ID is fixed to "device" when the result of the
analyzer is automatically validated
・“ Appendix B. Analysis Parameters”
Attachment <UC US-3500, UC-1000, US-1200>
Removed 3+ from CLOUD

21 2021/03/02 ・ Added a Out of measuring interval flag to "9.7 Analysis Result


Record Abnormal Flag" of "5.3.3.4. Analysis Result Record"
・ Added Korea destination to "Appendix B. Analysis Parameters".
Added the following items.
Profile UF : URD
Profile Manual : M-URD
Profile UD Manual : P-URD
・ Added the following items to "Appendix D. Review Comments".
RC_MeasuringInterval_UF
RC_MeasuringInterval_BF
・ Added Korea destination to "Appendix E. Scatter Images".
Cause
1. General ............................................................................................................................................................ 11

2. Scope ................................................................................................................................................................ 11

3. Glossary ........................................................................................................................................................... 11

4. Cautions when connecting to U-WAM.......................................................................................................... 12

4.1.1. Conditions for connecting to host ......................................................................................................12

5. Communication Specifications ...................................................................................................................... 13

5.1. Physical Layer (Hardware) ................................................................................................................................14

5.1.1. TCP/IP connection .............................................................................................................................14

5.2. Data Link Layer (Transmission Protocol) .........................................................................................................15

5.2.1. Communication status .......................................................................................................................17

5.2.2. Establishment phase...........................................................................................................................18

5.2.3. Transfer phase....................................................................................................................................19

5.2.4. Termination phase .............................................................................................................................21

5.2.5. Timeout..............................................................................................................................................21

5.3. Presentation layer ..............................................................................................................................................22

5.3.1. Messages, Records, and Fields ..........................................................................................................22

5.3.2. Communication protocol ...................................................................................................................24

5.3.3. Details of Records..............................................................................................................................31

6. Example of Communication .......................................................................................................................... 56

6.1. Order information ..............................................................................................................................................56

6.1.1. Order information in download mode ...............................................................................................56

6.1.2. Order information in query mode ......................................................................................................58

6.2. Analysis result information ...............................................................................................................................60

6.2.1. Urine chemistry analysis results ........................................................................................................60

6.2.2. Urine sediment analysis results .........................................................................................................62

6.2.3. Visual examination results .................................................................................................................64

9
R315168
6.2.4. Particle classification analysis results ................................................................................................66

6.2.5. Body fluid sample analysis results.....................................................................................................68

6.2.6. QC analysis results ............................................................................................................................70

6.3. Quality Control ..................................................................................................................................................73

6.3.1. Quality control lot information output ...............................................................................................73

Appendix A. TCP/IP Communication ........................................................................................................................... 74

A.1 Software.............................................................................................................................................................74

Appendix B. Analysis Parameters ................................................................................................................................. 75

Appendix C. Research Information .............................................................................................................................. 75

Appendix D. Review Comments .................................................................................................................................... 76

D.1 Urine Sediment (Profile: UF) ................................................................................................................................76

D.2 Body Fluid (Profile: BF) .......................................................................................................................................77

Appendix E. Scatter Images........................................................................................................................................... 78

E.1 Urine Sediment (Profile: UF) ................................................................................................................................78

E.2 Body Fluid (Profile: BF) ........................................................................................................................................79

E.3 QC Parameters .......................................................................................................................................................80

Appendix F. Parameter Names for Host Transmission ............................................................................................... 81

F.1 Reportable Parameters and Research Parameters (Result Type “S”).....................................................................81

F.2 Research Information (Result Type “S”) ...............................................................................................................81

F.3 Review Comments (Result Type “RC”) ................................................................................................................81

F.4 Scatter Images (Result Type “IF”) .........................................................................................................................81

Appendix G. Shared Folder for Scatter Images ........................................................................................................... 82

Appendix H. Units .......................................................................................................................................................... 83

Appendix I. Disease Information................................................................................................................................... 83

Appendix J. Quality Control Lot Information ............................................................................................................. 85

Appendix K. Qualitative Instrument Error Code Comparison Table ....................................................................... 89

10
R315168
1. General
U-WAM, UDM

2. Scope
This specification applies to ASTM communication between U -WAM and a host computer.
In North America destination U-WAM name is UDM. Therefore WAM shall be replaced with UDM.

3. Glossary
The terms used in this document are defined below.
Numeric character:
ASCII code characters “0” (30h) through “9” (39h). Full-width characters such as “0” are not treated
as numeric characters.
Alphabetic character:
ASCII code characters “A” (41h) through “Z” (5Ah) and “a” (61h) through “z” (7Ah). Full-width
characters such as “A” are not treated as alphabetical characters.
Single-byte character:
ISO/IEC 646 (ASCII) character codes 00h through 7Fh (7 -bit codes), except control characters
(00h through 1Fh) and DEL (7FH).
Extended single-byte character:
ISO/IEC 8859 character codes 00h through FEh (8 -bit codes), except control characters (00h
through 1Fh, 80H through 9FH) and DEL (7FH).
For example, single-byte katakana and Latin-1 characters are included.
Alphanumeric character:
Numeric and alphabetical characters.
RAW data:
Result values received from the analyzer before conversion of units or other processing.
Main Format:
Result value format set as the “Main Format” in the result display formats of the parameters.
ASTM LIS2-A2:
Specifications of the low-level protocol used for transfer of messages between clinical laboratory
equipment and computer systems
ASTM E1381-95:
Specifications for transfer of messages between clinical laboratory equipment and computer
systems.
IEEE802.3:
Standards that define media access control (MAC) in the physical layer and data link layer of
wired Ethernet

11
R315168
4. Cautions when connecting to U-WAM

4.1.1. Conditions for connecting to host

Number of UC- Communication format Number Communication protocol


3500 units ASTM1381-95 ASTM1381-02 of ports Download mode Query mode
0 ○ ○ 2 ○ ○
1 ○ ○ 2 ○ ○
2 ○ 2 ○ ○
×
>=3 ○ 2 ○ ×

Perform communication using the settings marked ○ in the above table, based on the number of
connected UC-3500 units.
If settings marked × are used, a timeout error will occur in U -WAM and host order
communication.

12
R315168
5. Communication Specifications
Communication specifications are based on a layer protocol.
(1) Physical layer
Specifies the transmission and reception of signals between the instrument and the host
computer through mechanical and electrical connections.
(See section 0.)

(2) Data link layer


Specifies the transmission and reception of data by link connections and by frame between the
instrument and the host computer.
(See section 5.2.)

(3) Presentation layer


Specifies the messages that are sent and received between the instrument and the host computer.
(See section 5.3.)

Presentation layer Specifies message specifications

Specifies link connection and frame


Data link layer
specifications
Physical layer Specifies mechanical and electrical

specifications
Note:
Only TCP/IP connections are supported.
In a TCP/IP connection, the presentation layer conforms to ASTM LIS2 -A2.
U-WAM supports the following two modes for data output conforming to the ASTM LIS2 -A2
format.

1. ASTM E1381-02 mode


The presentation layer conforms to LIS2-A2.
The data link layer conforms to ASTM E1381-02.
The physical layer conforms to IEEE802.3.

2. ASTM E1381-95 mode


The presentation layer conforms to LIS2-A2.
The data link layer and the physical layer conform to IEEE802.3.

ASTM E1381-95 mode ASTM E1381-02 mode


Presentation layer ASTM LIS2-A2 ASTM LIS2-A2
Data link layer *1 IEEE802.3 ASTM E1381-02
Physical layer *1 IEEE802.3 IEEE802.3

*1: The IEEE802.3 specifications for the data link and physical layers are not described in this document.

13
R315168
5.1. Physical Layer (Hardware)
5.1.1. TCP/IP connection
5.1.1.1. Connector and cable
· A compatible connector must be used for the Ethernet connector of the PC on which U -WAM is
installed.
· For the communication cable, use UTP category 5 or higher cable.

5.1.1.2. Signal Identification Level


Conforms to IEEE802.3.

5.1.1.3. Input/Output Circuit


Conforms to IEEE802.3.

14
R315168
5.2. Data Link Layer (Transmission Protocol)
The data link layer transfers messages between systems using a character-based protocol in accordance
with the specifications of the data link layer of ASTM LIS2 -A2 (E1381-02 mode) or ASTM E1381-95
mode. This section briefly describes communication control procedures. For details, see IEEE802.3.
For the TCP/IP connection, the TCP connection is established prior to communication. To establish the
connection, the host computer acts as a server and the U -WAM acts as a client. U-WAM establishes a
connection by requesting a connection to the IP address and the port number t hat are provided by the
host computer.
U-WAM supports up to two ports for communicating with the host computer. The following two
operation methods are assumed.

■ When using one port for communicating with a host computer * 1


U-WAM sends analysis results to the host computer, and the host computer registers orders to U -WAM
via one port.
* If the reception of analysis result information and the sending of order information occur at the same
timing, “ENQ clash” may occur.

Sending analysis results


and registering orders

Host computer U-WAM

■ When using two ports for communicating with the host computer * 1
To avoid “ENQ clash”, separate ports are used for sending from U -WAM to the host computer and
sending from the host computer to U-WAM.

Sending analysis results

Registering orders
Host computer U-WAM

15
R315168
It is possible to change port number by user setting screen of U -WAM.
Result port and order port can be set in the following screen.

Result port Order port

*1: For ASTM E1381-95 mode, only 2 ports are available.

16
R315168
5.2.1. Communication status
The data link layer has the following 2 communication states:
⚫ Neutral status
⚫ Linked status
Transition to each status is accomplished through the following 3 phases.
(1) Establishment phase
Establishes a communication line, and determines the direction of data transfer. In this way, the
sender and the receiver are identified, and the change is made from neutral status to linked
status.

(2) Transfer phase


The sender transmits messages to the receiver until all messages are transferred.

(3) Termination phase


Releases the communication line. Changes both the sender and the receiver from linked status to
neutral status.

Establishment phase

Neutral
status Linked status Transfer phase

Termination phase

17
R315168
5.2.2. Establishment phase
(1) The sender (IPU) sends an [ENQ] signal to the receiver (host computer) * 1 . The receiver responds
to the sender as follows:
 Returns an [ACK] signal if communication is enabled.
 Returns a [NAK] signal if communication is disabled.
If the receiver responds with [NAK] signal, the sender waits for at least 10 seconds before
attempting to send another [ENQ] signal.

Max. 15 sec. Max. 15 sec.

E E E
N N N
U-WAM U-WAM
Q Q Q

A N
Host computer C Host computer A
K K 10 sec.

(2) When both the sender and receiver send [ENQ] signals, the host computer must yield control to U -
WAM.
 U-WAM IPU sends an [ENQ] signal again after 1 second.
 The host computer must wait at least 20 seconds before sending an [ENQ] signal again.

1 sec.

E E E
U-WAM N U-WAM
N N
Q Q Q
E E E
Host computer Host computer
N N N
20 sec. or
Q Q more Q

*1: For ASTM E 1381-95 mode, the transmitting side does not send <ENQ> to the receiving side.

18
R315168
5.2.3. Transfer phase
During the transfer phase, the sender sends messages to the receiver. The transfer phase continues until
all messages have been sent.
< ASTM LIS2-A2(E1381-02 mode)>
(1) Messages are sent using multiple frames per record. The maximum number of characters in a
record is set to 240 characters.
(2) Multiple records cannot be included in a single text frame.
(3) If the record contains no more than the maximum number of characters, a frame with the
following structure will be sent.
[STX] [F#] [Text] [ETX] [CHK1] [CHK2] [CR] [LF]
If the record is longer than the maximum number of characters, it is divided into 2 or more
frames. The intermediate frame text termination code is [ETB] and the final frame text
termination code is [ETX], as shown below.
[STX] [F#] [Text] [ETB] [CHK1] [CHK2] [CR] [LF]
[STX] [F#] [Text] [ETB] [CHK1] [CHK2] [CR] [LF]
……
[STX] [F#] [Text] [ETX] [CHK1] [CHK2] [CR] [LF]

Symbol Description
[STX] Start of a frame.
[F#] Frame number.
A number from 0 to 7 is used. The number starts from 1 and continues
through 2,3,4,5,6,7,0, after which the sequence repeats.
In case of retransmission, the same frame number is sent.
[Text] ASTM LIS2-A2 records are used.
For this reason, the codes below cannot be used.
0x00-0x06,0x08,0x0A,0x0E-0x1F,0x7F,0xFF
[ETB] Control code indicating end of text (for intermediate frames).
[ETX] Control code indicating end of text (for the final frame).
[CHK1] [CHK2] Expressed by characters “0”-“9” and “A”-“F”.
Characters from the next character after [STX] through [ETB] or
[ETX] (including [ETB] or [ETX]) are added in binary. The least
significant 8 bits are expressed in hex as a 2 -digit number, which is
converted to ASCII characters “0” to “9” and “A” to “F”. The most
significant digit is stored in CHK1 and the least significant digit is
stored in CHK2.
[CR] [LF] Control code indicating end of frame.

(4) When the receiver has successfully received the frame and is prepared to receive the next
frame, the receiver responds with an [ACK] signal. After the sender receives the [ACK] signal,
the sender increments the frame number and either sends a new frame or transitions to the
termination phase.

19
R315168
(5) If the receiver fails to receive the frame and is prepared to receive the same frame again, the
receiver responds with a [NAK] signal. After receiving [NAK], the sender sends the most recent
frame again, using the same frame number. If the sender fails to send the same frame 6 times
consecutively, the sender must transition to the termination phase and cancel transmission of
the message.

E
Max. 15 Max. 15
6th O
1st sec. sec.
Sender
… attem T
attem
Text frame#1 Text frame#1
pt
pt N N
Receiver A … A
K K

(6) U-WAM processes the [EOT] response from the host computer as an [ACK] signal. (An [EOT]
response from the receiver is normally a request to the sender to stop transmission. However,
U-WAM does not support this function.)

<ASTM E1381-95 mode>


(1) Messages are sent per record. There is no limit on the maximum n umber of characters of a
record.
(2) Record with the following structure will be sent. .
[Text] [CR]
Symbol Description
[Text] ASTM E1381-95 records are used.
For this reason, the codes below cannot be used.
0x00-0x06,0x08,0x0A,0x0E-0x1F,0x7F,0xFF
[CR] Control code indicating end of frame.

20
R315168
5.2.4. Termination phase
During the termination phase, the status returns to neutral.
The sender sends an [EOT] signal to inform the receiver that message transmission has been
completed. The sender transitions to neutral status by sending an [EOT] signal, and the receiver
transitions to neutral status by receiving the [EOT] signal.

5.2.5. Timeout
The timer is used to detect a failure to coordinate between the sender and the receiver * 1 . The timer is
used as a means of recovery from failure in a communication line or in a destination device.
(1) During the establishment phase, the timer is set when the sender sends an [ENQ] signal. A
timeout occurs if an [ACK], [NAK] or [ENQ] signal response is not received within 15
seconds. After the timeout, the sender transitions to the termination phase.
(2) During the transfer phase, the timer is set when the sender sends the final character of a
frame. Send a response within the following time limit.
■ Order inquiry
• When U-WAM is connected to a chemistry analyzer: within 8 seconds
• When U-WAM is not connected to a chemistry analyzer: within 18 seconds
After the timeout, the sender transitions to the termination phase. The receiver sets a 30 -
second timer when first entering the transfer phase or when responding (by [ACK] or [NAK])
to a frame. A timeout occurs if the receiver receives no frame or [EOT] signal from the
sender within 30 seconds. After the timeout, the receiver discards the current incomplete
message and transitions to the termination phase.
*1: For ASTM E1381-95 mode, timeout processing is not performed.

21
R315168
5.3. Presentation layer
5.3.1. Messages, Records, and Fields
5.3.1.1. Messages
In the presentation layer, all data is transmitted using messages. A message consists of a sequence of
records that starts with a message header record (H) and ends with a message termination record (L).

5.3.1.2. Records
A record is a sequence of text that begins with an ASCII alphabetic character called a record identifier
and ends with [CR].
Record type Record identifier Level Cause
Header H 0 Contains sender and receiver information.
Patient Information P 1 Contains patient information.
Inquiry Q 1 Not used.
Analysis order O 2 Contains analysis order information.
Analysis result R 3 Contains analysis result information.
Comment C 1-4 Contains comments about the sample, patient, or report.
Manufacturer M 1-4 Not used.
information
Scientific S 1 Contains information concerning file path of QC lot
information information.
Message termination L 0 Indicates the end of the message.
 A smaller level number indicates a higher level.
 A high-level record holds information that is common to all low-level records.
 Any level other than 0 must be positioned after higher levels. However, the comment record can be
inserted at any level. The comment record is considered to be one lower level than the preceding record.
However, consecutive comment records are not allowed.
[Transmission example] (Correct): H->P->O->R->L
(Incorrect): H->R->L (P and O must be transmitted prior to R)

22
R315168
5.3.1.3. Fields
A record is further divided into multiple fields by field delimiters. A field is identified by its position
within a record and has a variable length. The following are used as delimiters.

Delimiter type Code Cause


Field delimiter Vertical Separates adjacent fields within a record.
bar (|)
(7Ch)
Repeat delimiter Backslash Used to repeat the same field when there are multiple components
(\)(5Ch) of the same type in the field.
Component delimiter Caret (^) Separates a single field into multiple sub-fields.
(5Eh)
Escape delimiter Ampersand Used to embed special characters in the data. To use Japanese for
(&) (26H) a name or comment, directly use full-width characters without
using escape delimiters. Refer to “Appendix G. Shared Folder
for Scatter Images” for an example of scatter image path
conversion.
(“ |” → &F&, “ \” → &R&, “ ^” → &S&, “ &” →
&E&, and hexadecimals → &Xxxxx&)

Messages

Record 1 Record 2 … Record n

Field 1 Field 2 … Field n CR

Record identifier Delimiter “|” or “\”

Component 1 Component 2 ... Component n

Delimiter “^”

23
R315168
5.3.2. Communication protocol
Communication of order information has 2 communication mode (Download mode and Query mode).
Download mode is standard mode. Communication mode can change by U-WAM setting function. Please
confirm IFU and Service manual.
<Download mode>

Analyzer U-WAM Host

Order
Information
Read
Sample Barcode

Order
Inquiry

Order
Information

mseasurement

Analysis
result Analysis
result

<Query mode>
Inquiry timing: Always

24
R315168
Inquiry timing: Once

Attention!
・If user want to connect query mode, Contact your local Sysmex service representative.
・If user connects query mode, connect U -WAM and Host must always 2 port.
(If user connected 1 port, communication error occurs becau se U-WAM and LIS communication
Traffic is heavy.)
・When connecting two or more urine quantitative analyzers, always connect two host communication
ports, even in download mode.
・When connecting two or more urine quantitative analyzers, always use ASTM E1381-95 format.
・Inquiry Timing: Always. As for the sample number inquired from the analyzer, if the profile of the
analyzer of the inquiry source is not registered in U -WAM, U-WAM will make an order inquiry to
Host. Inquiry Timing: As for the sample number inquired from the analyzer, if the profile of the
analyzer of the inquiry source is not registered in U -WAM, U-WAM will make an order inquiry to
Host.
・Inquiry Timing: Always. As for the sample number inquired from the analyzer, if the profile of the
analyzer of the inquiry source is not registered in U -WAM, U-WAM will make an order inquiry to
Host.
・Inquiry Timing: Once. As for the sample number inquired from the analyzer, if the profile of the
analyzer of the inquiry source is not registered in U -WAM, U-WAM will not make an order inquiry to
Host and reply to the analyzer that there is no order.
・Inquiry Timing: Once. When receiving an order inquiry from the U-WAM to the host, the Host should
send all order information to the U-WAM.
25
R315168
5.3.2.1. Analysis order information (host computer → U-WAM)
Used to send registration, editing, and cancellation of orders from the host computer. A comment
record can be omitted.

* Attention
When sending analysis order, the combination of the order number and sample number must be unique.
For details, refer to "5.3.3.3 Analysis Order Record ".

ASTM LIS2-A2 (E1381-02 mode)


U-WAM Direction Host computer
← ENQ
ACK →
← H: Header record
ACK →
← P: Patient record
ACK →
← C: Patient comment record
ACK →
← O: Order record
ACK →
← C: Sample comment record
ACK →
← L: Message terminator record
ACK →
← EOT

STM E1381-95mode
U-WAM Direction Host computer
H:Header record
P:Patient record

C:Patient comment record
O:Order record
C:Sample comment record
L: Message terminator record

26
R315168
5.3.2.2. Order inquiry (U-WAM → host computer)
When U-WAM receives an order inquiry from an analyzer and the inquired order cannot be found in
U-WAM, U-WAM makes inquiry to the host computer.

ASTM LIS2-A2 (E1381-02 mode)


U-WAM Direction Host computer
ENQ →
← ACK
H: Header record →
← ACK
Q: Inquiry record →
← ACK
L: Message terminator record →
← ACK
EOT →

Through mode

Attention!
・ When using through mode, the host cannot be queried from U-WAM.

・ When using through mode, U-WAM outputs analysis results to the host, even when there is no request

information.

・ When using through mode, the results of barcode scanning error samples and urgent samples are output.

(For details on barcode scanning error samples and urgent samples, refer to “ 5.3.3.3 Analysis Order Record ”.)

27
R315168
ASTM E1381-95mode
U-WAM Direction Host computer
H: Header record
Q: Inquiry record →
L: Message terminator record

* For the response of host computer to order inquiries, refer to “5.3.2.2 Order inquiry (U-WAM →
host computer)”.
* For the timeout for order inquiries, refer to “ 5.2.5 Timeout”.
* For the response to an order inquiry, send all orders to the inquired sample number.
* If there is no order to the inquired sample number when responding to an ord er inquiry, set the
received sample number to Specimen ID of 0 record, and set nothing to Analysis Parameter ID.

28
R315168
5.3.2.3. Analysis results, QC results (U-WAM → host computer)
Used to output analysis results and QC results (QC results selected in the QC Chart screen are output).
If patient information is not registered or QC results are output, the patient record is sent blank. The
report comment record is output only when report comments are output. (If there are no report
comments, the report comment record is omitted.)
When “selected value only” is selected about the report of urine quantitative analysis result in the
setting of the U-WAM about analysis result, analysis result reported as the urine quantitative analysis
result is 1 of 3 analysis results of “Urine quantitative”, ”Visual”, or ”Particle classification”. When
outputting all urine quantitative analysis results to analyze, select “All” in the report of urine
quantitative analysis result. Refer to the Instructions for Use for the details of the setting.
ASTM LIS2-A2 (E1381-02 mode)
U-WAM Direction Host
ENQ →
← ACK
H: Header record →
← ACK
P: Patient record →
← ACK
O: Order record →

Repeat n times ← ACK


R: Result record →
(n = the number
← ACK
of items) C: Report comment record →
← ACK
L: Message terminator record →
← ACK
EOT →

ASTM E1381-95mode
U-WAM Direction Host
H: Header record
P: Patient record
O: Order record →
R: Result record
C: Report comment record
L: Message terminator record

29
R315168
5.3.2.4. Outputting quality control lot information (U-WAM →host computer)
Used to output lot information of quality control.
ASTM LIS2-A2 (E1381-02 mode)
U-WAM Direction Host computer
ENQ →
← ACK
H: Header record →
← ACK
S: Scientific information record →
← ACK
L: Message terminator record →
← ACK
EOT →

ASTM E1381-95mode
U-WAM Direction Host computer
H: Header record
S: Scientific information record →
L: Message terminator record

30
R315168
5.3.3. Details of Records
Please be sure to set the data and send it where "○ " is listed in the Host → U-WAM necessary
column.
5.3.3.1. Header Record
<Field definitions>
Host → U-WAM
ASTM Max. size
Field name U-WAM → Host Remarks
field necessary (bytes)

6.1 Record Type ○ H H 1 Fixed

6.2 Delimiter ○ | \^& | \^& 4 Fixed


Definition

6.3 Message control Not used Not used -


ID

6.4 Access Password Not used Not used -

6.5 Sender Name or ID Host Name Product Name^ 8^


Software Version^ 14^
Serial No.^^^^ 5^^^^
PS Code
8

6.6 Send Address Not used Not used -

6.7 Reserved Field Not used Not used -

6.8 Sender Telephone Not used Not used -


Number

6.9 Sender Not used Not used -


Characteristics

6.10 Receiver ID Not used Not used -

6.11 Comment Not used Not used -

6.12 Processing ID Not used Not used -

6.13 Version No. ○ LIS2-A2 LIS2-A2 7 Fixed

6.14 Date and Time Not used Message Date & Time - YYYY: Year
YYYYMMDDHHMMSS MM: Month
DD: Day
HH: Hour
MM: Minute
SS: Second

31
R315168
<Detailed explanation of fields>
1) 6.2 Delimiter Definition
The characters “ |\^&” are used as a fixed character string. A delimiter is not required
between 6.1 and 6.2.

2) 6.5 Sender Name or ID


Host name: Host computer name
Product name: “U-WAM” (fixed), “UDM” (fixed) in the case of North American
Software version: U-WAM software version
Serial number: U-WAM serial number
PS code: U-WAM PS code

3) 6.14 Date and Time


Time stamp indicating when the message was created.

32
R315168
5.3.3.2. Patient Information Record
<Field definitions>
Host → U-WAM Max.
ASTM
Field name U-WAM → Host size Remarks
field necessary
(bytes)
7.1 Record Type ○ P P 1 Fixed

7.2 Sequence Number ○ Sequence Sequence Number 4 Sequence Number of


Number records

7.3 Practice-Assigned Not used Not used -


Patient ID

7.4 Laboratory-Assigned Patient ID Patient ID 16


Patient ID

7.5 Patient ID Not used Not used -

7.6 Patient Name Last Name^ Last Name^ 20^


First Name^ First Name^ 20^
Middle Name^ Middle Name^ 20^
\ \ \
Last Name Last Name 20^
(kanji)^ (kanji)^ 20^^^
First Name First Name
(kanji)^^^ (kanji)^^^
7.7 Mother's Maiden Not used Not used -
Name

7.8 Birth Date Birth Date, Birth Date, A.D. 8 YYYY: Year
A.D. MM: Month
DD: Day

Example: 20010802
(Aug. 2, 2001)

7.9 Patient Sex ○ Patient Sex Patient Sex 1 M: Male


F: Female
U: Unknown
7.10 Patient Race Not used Not used -

7.11 Patient Address Not used Not used -

7.12 Reserved Field Not used Not used -

7.13 Patient Telephone Not used Not used -


Number

7.14 Attending Physician Not used Not used -


ID

7.15 Special Field 1 Blood type Blood type and RH 5 ANEG: A-


APOS: A+

33
R315168
Host → U-WAM Max.
ASTM
Field name U-WAM → Host size Remarks
field necessary
(bytes)
(Blood type and RH and RH type type BNEG: B-
type) BPOS: B+
ONEG: O-
OPOS: O+
ABNEG: AB-
ABPOS: AB+
(Blank): Unknown
7.16 Special Field 2 Not used Not used -

7.17 Patient Height Not used Not used -

7.18 Patient Weight Not used Not used -

7.19 Patient's Known or Disease Code Not used 10


Suspected Diagnosis
7.20 Patient Active Not used Not used -
Medications
7.21 Patient Dietary Not used Not used -
Treatment
7.22 Attending Physician Not used Not used -
Field 1
7.23 Attending Physician Not used Not used -
Field 2
7.24 Admission and Not used Not used -
Discharge Dates
7.25 Admission Status In/Out In/Out Status 2 OP: Out-patient
Status IP: In-patient
(Blank): Unknown
7.26 Location Not used Not used -

7.27 Alternate Diagnosis Not used Not used -


Code and
Classification Type
7.28 Alternate Diagnosis Not used Not used -
Code and
Classification
7.29 Patient Religion Not used Not used -

7.30 Marital Status Not used Not used -

7.31 Isolation Status Not used Not used -

7.32 Language Not used Not used -

7.33 Hospital Service Not used Not used -

7.34 Hospital Not used Not used -


Institution
7.35 Medicine Not used Not used -
Administration Type

34
R315168
<Detailed explanation of fields>
1) 7.2 Sequence Number
The sequence number starts at 1 and indicates the sequence position in which the record
appeared in the message. This number is reset to 1 when a higher -level record appears in the
message.

2) 7.4 Laboratory-Assigned Patient ID


The patient ID is a unique patient identification and may contain a maximum of 16 dig its of
alpha-numeric and a hyphen "-" (2Dh).

3) 7.6 Patient Name


Any characters can be used for the first name (max. 20 characters) and the last name (max. 20
characters). For Japan, last names in kanji can be set using the delimiter “ \ ”.

4) 7.8 Birth Date


Date of birth of the patient.
When the patient date of birth is unknown, do not set the patient date of birth.

5) 7.9 Patient Sex


Gender of the patient.

6) 7.15 Special Field 1 (Blood type and RH type)


Blood type and RH type of the patient. To send “unknown”, leave blank.

7) 7.19 Patient's Known or Suspected Diagnosis


The patient's disease code. Only one can be set. See section “ Appendix I. Disease
Information”.

7) 7.25 Admission Status


Admission status of patient. To send “unknown”, leave blank.

35
R315168
5.3.3.3. Analysis Order Record
<Field definitions>
Host → U-WAM Max.
ASTM size
Field name necessary U-WAM → Host Remarks
field (bytes
)

8.4.1 Record Type ○ O O 1 Fixed

○ Sequence Number of
8.4.2 Sequence Number Sequence Number Sequence Number 4
records

○ *When the destination


is China
[U-WAM → Host]
8.4.3 Specimen ID Sample No. Sample No. 22 Sample number^rack
number^rack position
[Byte count]
22^6^2
Instrument
8.4.4 Not used Not used -
Specimen ID

1 to 100 analysis
^^^
parameters can be set
Universal Test ^^^ Parameter Name ^^^
8.4.5 using “\” as a
ID Parameter ID for Host 40
delimiter
Transmission

○ R: Routine
8.4.6 Priority Priority Priority 1 A: Urgent
S: Emergency
Requested/Orde
8.4.7 Not used Not used -
r Date and Time

○ YYYY: Year
MM: Month
Collection Date and Collection Date
Collection Date DD: Day
8.4.8 Time and Time 14
and Time HH: Hour
YYYYMMDDHHMMSS YYYYMMDDHHMMSS
MM: Minute
SS: Second
Collection End
8.4.9 Not used Not used -
Time
Collection
8.4.10 Not used Not used -
Volume

8.4.11 Collector ID Not used Not used -

○ [Host computer → U-WAM]


C: Cancellation of a
parameter
A: Addition of a
parameter to an existing
order
8.4.12 Action Code C, A, N N, Q 1
N: New order
[U-WAM → Host computer]
N: Sample analysis
results
Q: QC analysis results

36
R315168
Host → U-WAM Max.
ASTM size
Field name necessary U-WAM → Host Remarks
field (bytes
)

8.4.13 Danger Code Not used Not used -

Relevant
8.4.14 Clinical Not used Not used -
Information
Date/Time
YYYYMMDD
8.4.15 Specimen Not used 14
HHMMSS
Received
Urine: Urine
collected any
time
Urine-EarlyMorning:
Early morning
Urine, urine
Urine,
Urine- Urine-Pooled:
Urine-
EarlyMorning, Pooled urine
EarlyMorning,
Specimen Urine-Pooled, Urine-Postprandial:
Urine-Pooled,
8.4.16 Descriptor Urine- 20 Urine collected
Urine-
(Source) Postprandial, after eating
Postprandial,
Urine-Catheter, Urine-Catheter:
Urine-Catheter,
Blank Urine collected
*
by catheter

[Host → U-WAM]
Blank: Unknown
[U-WAM → Host]
*: Unknown
Physician Code^ Physician Code^
Physician Last Name Physician Last 20^
Physician Who ^ Name ^ 20^
8.4.17
Placed Order Physician First Physician First 20^^^
Name ^^^ Name ^^^ 10
Physician Title
Physician Physician Phone
8.4.18 Not used 20
Phone Number Number
User Field No.
8.4.19 1 Order No. Order No. 22
(Order No.)
User Field No.
2
8.4.20 (Reference Not used Not used -
values of other
fields)

8.4.21 Lab Field No. 1 Not used Not used -

8.4.22 Lab Field No. 2 Not used Not used -

Date/Time
Results
8.4.23 Not used Not used -
Reported or
Last Modified

37
R315168
Host → U-WAM Max.
ASTM size
Field name necessary U-WAM → Host Remarks
field (bytes
)
Instrument
8.4.24 Charge to Not used Not used -
Computer System

8.4.25 Instrument ID Not used Not used -

○ O: New order
8.4.26 Report Type O F 1
F: Final result

8.4.27 Reserved Field Not used Not used -

Location or
Ward Code^ 20^
Ward of Ward Code^
8.4.28 Ward Name^ 20^
Specimen Ward Name
Phone Number 20
Collection
Nosocomial
8.4.29 Not used Not used -
Infection Flag
Specimen
8.4.30 Not used Not used -
Service
Medical Section Medical Section
Specimen Code^ Code^ 20^
8.4.31
Institution Medical Section Medical Section 20
Name Name

38
R315168
<Detailed explanation of fields>
1) 8.4.2 Sequence No.
The sequence number starts at 1 and indicates the sequence position in which the record
appeared in the message. This number is reset to 1 when a higher -level record appears in the
message.

2) 8.4.3 Specimen ID
Sample number: 22 extended single-byte characters can be used. When the sample number is
less than 22 characters, the number is left-aligned without padding by zeros
or spaces before or after the ID.
Sample numbers beginning with “QC” are reserved for QC analysis.

* Barcode scanning error samples and samples without an ID


Some U-WAM settings may output a barcode scanning error sample or barcode without an ID.
Destination other than China: Not output by default
Destination China: Output by default
Through mode: Output

Analyzer Sample number when a barcode Number of


scanning error occurs digits
UC-3500 ************** 14
UF-3000/3000x/4000/5000 Barcode scanning error sample 15
Single Sampler (SA-51) ERR000000000001 -
ERR009999999999
Positive ID error 22
POSITIVEIDERR000000001 -
POSITIVEIDERR999999999
UF-3000/3000x/4000/5000 Barcode scanning error sample 14
Transfer connection (CV-11) ERR01000000001~
ERR01999999999
Positive ID error 22
POSITIVEIDERR000000001 -
POSITIVEIDERR999999999

Analyzer Sample without ID Number


of digits
UC-1000 (Blank) 0
When (blank), the ID is left-aligned
without padding by zeros or spaces
before or after the ID.
UF-3000/3000x/4000/5000 STAT000000000000000001 - 22
Single Sampler (SA-51) STAT999999999999999999
UF-3000/3000x/4000/5000 STAT000000000000000001 - 22
Transfer connection (CV-11) STAT999999999999999999
* A sample number beginning with STAT indicates an urgent sample.

39
R315168
* QC samples (Qualitative device)
Sample numbers of QC materials consist of “QC-”, the lot number and control level. Sample
numbers of QC materials are 4 digits to 12 digits. If less than 12 digits, it is left-aligned.

Level

UC-1000, UC-3500,

L: Low

H: High
1 2 3 4 5 6 7 8 9 10 11 12 ※ 1
Q C - Lot No. Lv

*1: In some cases, the qualitative instrument control level may not be output, due to U -WAM
settings (Output defaults.)

40
R315168
* QC samples (Except Qualitative device)
Sample numbers of QC materials consist of “QC -”, the lot number, control level, and QC
method. Sample numbers of QC materials are 6 digits to 13 digits. If less than 13 digits, it is
left-aligned.

Level: Method:

L: Low L: L-J

H: High X: X-bar
1 2 3 4 5 6 7 8 9 10 11 12 13
Q C - Lot No. Lv Method

* Example of sample numbers of QC materials


1 2 3 4 5 6 7 8 9 10 11
Q C - Y S 5 9 0 1 H X

Rack number* 2 * 3 This is the rack number during measurement. A number ※ 4 with a maximum
of 6 digits, right aligned, space padded at the front, is sent. (Not output for
QC results.)
Rack Position This is the rack position within the rack during measurement.
Number from 1 to 10. (Not output for QC results.)
*2: The rack number and rack position in the order record follow U -WAM settings.
They may not be output in some cases.
When the destination is other than China : Do not output as default
When the destination is China : Output as default
*3: When the data is transmitted, the rack number and rack position in the order record are
set as the analyzer rack number and rack position last measured.
*4: Text may be included in the rack number, depending on the U -WAM operating
environment.

3) 8.4.5 Universal Test IDs


Parameter ID
When an order is sent from the host computer to U-WAM, the IDs of the parameters to be
analyzed are listed. Refer to “Appendix B. Analysis Parameters” for parameter IDs that can be
set.

Parameter Name for Host Transmission


When results are sent from U-WAM to the host computer, the parameters that were analyzed
are listed. The values set at this time are the parameter names that are held in U -WAM for
transmission to the host computer. (Refer to [Parameter] - [(profile)] - [(parameter name)] in

41
R315168
the user settings screen of U-WAM. The values in the “Name for Host Transmission” field are
indicated.)
By default, the values in the “Parameter ID” column defined in each table of “ Appendix B.
Analysis Parameters” are set as the names for host transmission.

4) 8.4.6 Priority
Priority classification of the sample.

5) 8.4.8 Collection Date and Time


Date and time the sample was collected from the patient. This field is required when an order
is sent from the host computer to U-WAM.

6) 8.4.12 Action Code


[Host computer → U-WAM]
Code indicating the type of order information to be sent.
C: Cancellation of a parameter
A: Addition of a parameter to an existing order
N: New order

[U-WAM → Host computer]


Indicates the type of result information to be sent.
N: Sample analysis results
Q: QC analysis results

7) 8.4.15 Date/Time Specimen Received


The date and time U-WAM received the order from the host, or the date and time the order
was manually registered using U-WAM.

8) 8.4.16 Specimen Descriptor (Urine Type)


Sample urine type.

9) 8.4.17 Physician Who Placed Order


Physician information of sample.

10) 8.4.18 Physician Telephone Number


Telephone number of physician associated with the sample.

11) 8.4.19 User Field No. 1 - Order No.

42
R315168
The order number is used to identify the order. Assigned by the host computer. Up to 22
alphanumeric characters and hyphens “-” (2D h) can be used.
In the case of U-WAM Ver.00-13 or earlier, the combined order number and sample number
must be unique, or the order cannot be accepted.

12) 8.4.26 Report Type


The message's report type.
[Host computer → U-WAM]
O([4f]h): New order

[U-WAM → Host computer]


F: Final Result (Fixed: U-WAM always outputs final result data)

43
R315168
5.3.3.4. Analysis Result Record
[Routine analysis results]
For parameters with “S” for the “result type” of “9.3 Universal Test ID”, 2 records worth of RAW
data and Main Format result values are output.
* Analysis result completed to output by user operation or setting of U -WAM is output at the same time.
[QC analysis results]
In cases other than Qualitative device, 1 record worth of RAW data result values are output. In cases
Qualitative device, a plurality of records is outputted according to the setting of the U -WAM.

<Field definitions>
ASTM Max. size
Field name U-WAM → Host Remarks
field (bytes)

9.1 Record Type R 1 Fixed


9.2 Sequence Number Sequence Number 4 Sequence Number of records
9.3 Universal Test ID ^^^ ^^^ Analysis Method: Registration
Parameter Name for 40^ origin of the analysis results.
Host Transmission^ 1^ A: Instrument
Analysis Method^ 1^ M: Manual input
Dilution Ratio^ 2^ Dilution Ratio:
Result Type^ 6^ Other than UD visual examination:
Rack No.^ 2 “1” (fixed)
Rack Position Result of the UD visual
examination:“1” (Measurement of
urine samples in normal mode)
“2” (Measurement of urine
samples in precise mode)
Result Type: Type of analysis
parameter of result.
S: Reportable parameter, research
parameter, research information
RC: Review comment*1
RP : Sensitivity parameters
IF: Scatter image*2

9.4 Data value Result Value^ 20^


Result Format 10
9.5 Units Units 12
9.6 Reference Range Not used -
9.7 Analysis Result Analyzer flag^ 2 Analyzer flag:
Record Abnormal Flag LH flag 2 A, N, H, >, W, @, HH
LH flag:
LL, L, H, HH
The LH flag is omitted unless a
flag is given.
9.8 Nature of Abnormality Not used -
Testing
9.9 Analysis Result Measurement cell 1 Other than particle classification
Status information of UD-10 analysis results:
Not output
Particle classification analysis
results:
1: Imaging cell 1
2: Imaging cell 2
9.10 Date of Change in Not used -
44
R315168
ASTM Max. size
Field name U-WAM → Host Remarks
field (bytes)
Instrument Normative
Values or Units
9.11 Operator ID Visual result save 10^ The visual result storage user
user ID^ 20^ ID / user name is output only
Visual result save 10^ by visual or particle
user name^ 20 classification result.
Result value approval
user ID^
Result value approval
user name
9.12 Date/Time Test Not used -
Started
9.13 Date/Time Test YYYYMMDD 14
Completed HHMMSS
9.14 Instrument ID Instrument Name 12

<Detailed explanation of fields>


1) 9.2 Sequence Number
The sequence number starts at 1 and indicates the sequence position in which the record
appeared in the message. This number is reset to 1 when a higher -level record appears in the
message.

2) 9.3 Universal Test ID


Parameter Name for Host Transmission:
Set the name of the parameter.
For parameter names that are set, refer to “Appendix F. Parameter
Names for Host Transmission”.
Analysis Method: Registration origin of the analysis results.

A: Instrument

M: Manual input
Dilution Ratio: Other than UD visual examination: “1” (fixed)
Result of the UD visual examination: UD-10 Measurement mode
“1” (Measurement of urine samples in normal mode)
“2” (Measurement of urine samples in the precise mode)
* If the “Notify UD Measurement Mode to Host” setting of the
service setting is not checked, the Dilution Ratio of the UD visual
examination is fixed to 1.
* If the “selected value only” is selected about the report of
quantitative analysis result in the user setting, the Dilution Ratio of
the UD visual examination is fixed to 1.
Result Type: Type of analysis parameter of result.

45
R315168
S: Reportable parameter, research parameter, research information

RC: Review comment*1

RP: Sensitivity parameters

IF: Scatter image*2

3) 9.4 Data Value


Result Value: Result value of analysis parameter set in “9.3 Universal Test ID”.
The result value of “Result Format” is set.
When the “Result Type” of “9.3 Universal Test ID” is “IF”, the
shared file name of the image file is set. The format of the shared
file name is “(date folder)/(scatter image file name)”.* 3 * 8
Blank when “Result Type” of “9.3 Universal Test ID” is “RC”. (A
review comment in the result message means that a review
comment has been issued. This is not output in the message when a
review comment has not been issued.)
In the main format, an escape character may be output as indicated
below.

Output example of record of escape character (2.8x10^4 /ml)


U-WAM <STX>5R|9|^^^BACT^A^1^S^000001^1|27.9^RAW|/μ l||N||||^^admin^administrator||
20151203084934|UF-5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>6R|10|^^^BACT^A^1^S^000001^1|2.8x10 &S&4^MAINFORMAT|/ml||N||||^^admin^ad
ministrator||20151203084934|UF -5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>

Result Format: Indicates the format of the result value. In the case of normal
measurement, either of the following 2 values is set. * 5

RAW: Raw data

MAIN FORMAT: Main format

* This field is always “RAW” when “Result Type” of “9.3 Universal

Test ID” is “RC” or “IF”.

In the case of QC management, it is as follows.

In case of urine chemistry, result is set as the following by display

setting and measurement mode (normal measurement or QC

measurement).

< Other than Qualitative device,>

RAW: Raw data


46
R315168
< Qualitative device >* 6

In case QC item setting is qualitative value or concentration value.

RAW: Qualitative value

MAINFORMAT: Concentration value

In case QC item setting is reflectivity.

RAW: Reflectivity1

MAINFORMAT: Reflectivity2 (There is a case where the data value is

not output by setting and items.)


Display units setting is Result
RAW: Result
MAINFORMAT: Result
In case setting to output all value of qualitative, density, reflectance.

RAW_Q: Qualitative value

RAW_C: Concentration value

RAW_R1: Reflectivity1

RAW_R2: Reflectivity2 (There is a case where the data value is not

output by setting and items.)

4) 9.5 Units* 4
Result value units of analysis parameter set in “9.3 Universal Test ID”.
The “Result Value” of “9.4 Data Value” is expressed in these units.

5) 9.7 Result Abnormal Flag


Analyzer flag. (Not output for QC results.)
<Qualitative device>
W: Low reliability (past test sheet expiration date error occurred)
A: Analysis error (error result)
N: Normal
The following parameters are output from the U -WAM Ver. 00-05 software.
HH: Abnormal coloring (low) (Display on U-WAM screen: ? mark)
H: Positive (Display on U-WAM screen: * mark)
>: Abnormal coloring (high) (Display on U-WAM screen: ! mark)

<Urine quantitative analyzer>


Specify the analyzer flags that will be judgment criteria from t he following.
47
R315168
@: Out of measuring interval (Display on U-WAM screen: @ mark)
W: Low reliability (Display on U-WAM screen: * mark)
>: Retest judgment (Display on U-WAM screen: Red + mark)
H: Error judgment (Display on U-WAM screen: Yellow + mark)
A: Analysis error (error result)
N: Normal

LH flag.
< Normal measurement >
L: Below normal value lower limit but above abnormal value lower limit
H: Above normal value upper limit but below abnormal value upper limit
LL: Below abnormal value lower limit
HH: Above abnormal value upper limit

< QC management >


L: Below lower limit
H: Above upper limit

6) 9.9 Analysis Result Status


Analysis result status
Information of UD-10 analysis cells that are used to analyze.
1: Imaging cell 1
2: Imaging cell 2
* The analysis result status will be output only when [Sediment Result Report] is selected in
the user settings and [Notify of UD-10 analysis cell information] is selected in the service
settings. Not output for other than particle classification an alysis results.

7) 9.11 Operator ID
< Normal measurement result >
Visual result save user ID/user name
This is the user ID / user name that saved the visual or particle classification results.
It is not output in the result of the analyzer.
Result value approval user ID/user name
This is the user ID / user name that approved the result value.
*When the result of the analyzer is automatically validated, the user ID is fixed to
"device" and the user name is not output.
< Quality control results >
The operator ID is not output in the quality control result.

48
R315168
8) 9.13 Date/Time Test Completed
The date and time the test was completed.

9) 9.14 Instrument ID
Name of analyzer used for analysis. There is the possibility that analyzer name differs depending
on the setting of U-WAM.
For analysis results of routine samples, the analyzer name is set.
For QC results, the serial number of the analyzer is set.
For outputting visual examination/particle classification, see below.
Particle classification:
[Notify of UD-10 analysis cell information] in the service settings is selected:
"Analyzed name of UD-10"
[Notify of UD-10 analysis cell information] in the service settings is not selected:
Fixed as "ENTERED"
Visual examination: Fixed as "ENTERED"

*1: For review comments that are output, refer to “Appendix D. Review Comments”.
*2: For scatter images that are output, refer to “Appendix E. Scatter Images”.
*3: For the method for acquiring scatter images at the host computer, refer to “ Appendix G. Shared
Folder for Scatter Images”.
*4: For the set units, refer to the “Units” column of the tables in “ Appendix B. Analysis Parameters”.
For urine sediment, body fluid, and particle classification, units set for Main Format may be different
from the “Units” column of the tables in “Appendix B. Analysis Parameters”.
Refer to “Appendix H. Units”.
*5: In normal analysis, there are following 3 patterns of result format output by the setting of U -
WAM.

<RAW only>
Example of communication: Output example of record of urine quantitative analysis result (RBC and
WBC).
U-WAM <STX>5R|1|^^^RBC^A^1^S^000003^6|0.3^RAW|μ l||N||||^^admin^administrator||
20150804141233|UF_5000
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>6R|2|^^^WBC^A^1^S^000003^6|0.0^RAW|μ l||N||||^^admin^administrator||
20150804141233|UF_5000
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>

49
R315168
<MAINFORMAT only>
Output example of record of urine quantitative analysis result (RBC and WBC).
U-WAM <STX>5R|1|^^^RBC^A^1^S^000003^6|0.3^MAINFORMAT|/μ l||N||||^^admin^adminis
trator||20150804141233|UF_5000
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>6R|2|^^^WBC^A^1^S^000003^6|0.0^MAINFORMAT|/μ l||N||||^^admin^adminis
trator||20150804141233|UF_5000
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>

<RAW+MAINFORMAT>
Example of communication: Output example of RBC and WBC of UF.
U-WAM <STX>5R|1|^^^RBC^A^1^S^000003^6|0.3^RAW|μ l||N||||^^admin^administrator||
20150804141233|UF_5000
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>6R|2|^^^RBC^A^1^S^000003^6|0.3^MAINFORMAT|/μ l||N||||^^admin^adminis
trator||20150804141233|UF_5000
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>7R|3|^^^WBC^A^1^S^000003^6|0.0^RAW|μ l||N||||^^admin^administrator||
20150804141233|UF_5000
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>0R|4|^^^WBC^A^1^S^000003^6|0.0^MAINFORMAT|/μ l||N||||^^admin^adminis
trator||20150804141233|UF_5000
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>

*6: In the case of QC analysis on a qualitative instrument, there are four patterns for the result format
that is output (<RAW only >, <MAINFORMAT only >, <RAW+ MAINFORMAT>, <RAW_Q+
RAW_C+ RAW_R1+ RAW_R2>). Result value types that are set in RAW and MAINFORMAT
depend on the U-WAM settings and may be changed.
*7: With U-WAM Ver.00-09 or later, result types are output for all parameters. With Ver.00 -08 or
earlier, result types may not be output for some quality control parameters. The communications
specification for result types can be switched using U-WAM settings.
*8: Even when the deleted QC plot data of the scatter images is output to the host computer, the target
scatter file path is transmitted.

<With U-WAM Ver.00-08 or earlier, result types are not output for some quality control parameters.>
Analyzer Parameters for which result types are not output
Urine quantitative analyzers Cond.
Particle digital imaging devices C1-PCD_M, C1-PCN_CV, C1-FB_M, C2-
PCD_M, C2-PCN_CV, C2-FB_M

50
R315168
5.3.3.5. Comment Record (Report Comments, Patient Comments, Sample Comments)
<Field definitions>
Host → U-WAM
ASTM Max. size
Field name U-WAM → Host Remarks
field necessary (bytes)

10.1 Record Type ○ C C 1 Fixed

10.2 Sequence Number ○ Sequence Sequence Number 4 Sequence


Number Number of
records

10.3 Comment Source Not used Not used -


10.4 Comment Text ○ Comment Type^ Comment Type^ 1^
Comment Comment [Report comment]: 200
[Patient comment]:
200
[Sample comment]: 80
10.5 Comment Type Not used Not used -

<Detailed explanation of fields>


1) 10.2 Sequence Number
The sequence number starts at 1 and indicates the sequence position in which the record
appeared in the message. This number is reset to 1 when a higher -level record appears in the
message.

2) 10.4 Comment Text


Comment Type: Indicates the comment type.
(None): Report comment
P: Patient comment
S: Sample comment
Comment: Expresses a comment.
Report comment is output in free text format (within 100 characters) or code
format (CC01-CC20 fixed). It is possible to send multiple comments, and
different comments are separated with “/” and sent. When registering
multiple comments, comment cannot be registered if a total is more than 100
characters. When report comment is output in code format, check the report
comment master in user setting menu of U-WAM to see the content of the
report comment.
Any characters can be used for a patient comment. Maximum 100 characters.
Any characters can be used for a sample comment. Maximum 40 characters.

51
R315168
5.3.3.6. Inquiry record
<Field definitions>
ASTM Max. size
Field name U-WAM → Host Host → U-WAM Remarks
field (bytes)
11.1.1 Record Type Q Not used 1 Fixed

11.1.2 Sequence Number Sequence No. Not used 4 Sequence Number of


records

11.1.3 Starting Range ID Sample No. Not used 22


Number

11.1.4 Ending Range ID Not used Not used -


Number

11.1.5 Universal Test ID Not used Not used -

11.1.6 Range of Request Not used Not used -


Time Limits

11.1.7 Starting Date & YYYYMMDDHHMMSS Not used 14 Date & Time when a
Time of Results inquiry is sent
Request

11.1.8 Ending Date & Time Not used Not used -


of Results Request

11.1.9 Requesting Not used Not used -


Physician Name

11.1.10 Requesting Not used Not used -


Physician Telephone
Number

11.1.11 User Field No. 1 Not used Not used -

11.1.12 User Field No. 2 Not used Not used -

11.1.13 Requested C, F, D Not used - C: Qualitative device


Information Status
F: Urine quantitative
Codes
analyzer

D: Particle digital
imaging device

[Detailed explanation of fields]


1) 11.1.2 Sequence Number
The sequence number starts at 1 and indicates the sequence position in which the record appeared
in the message. This number is reset to 1 when a higher -level record appears in the message.
2) 11.1.3 Starting Range ID Number
Sample number: 22 extended single-byte characters can be used. When the sample number is
less than 22 characters, the number is left-aligned without padding by zeros
or spaces before or after the ID.
3) 11.1.7 Starting Date & Time of Results Request
52
R315168
The format is fixed to “YYYYMMDDHHMMSS”.
YYYY indicates the year, MM the month, DD the day, HH the hour in 24 -hour system (00-23),
MM the minute (00-59), and SS the second (00-59).
5.3.3.7. Scientific Record
<Field definitions>
ASTM Max. size
Field name HOST → U-WAM U-WAM → HOST Remarks
field (bytes)
13.1 Record Type ID Not used S 1 Fixed

13.2 Sequence Number Not used 1 4 Always 1

13.3 Analytical Method Not used Not used -

13.4 Instrumentation Not used Not used -

13.5 Reagents Not used Not used -

13.6 Units of Measure Not used Not used -

13.7 Quality Control Not used File path of QC 200


lot information

13.8 Specimen Not used Not used -


Descriptor

13.9 Reserved Field Not used Not used -

13.10 Container Not used Not used -

13.11 Specimen ID Not used Not used -

13.12 Analyte Not used Not used -

13.13 Result Not used Not used -

13.14 Result Units Not used Not used -

13.15 Collection Date Not used Not used -


and Time

13.16 Result Date and Not used Not used -


Time

13.17 Analytical Not used Not used -


Preprocessing
Steps

13.18 Patient Diagnosis Not used Not used -

13.19 Patient Birthdate Not used Not used -

13.20 Patient Sex Not used Not used -

13.21 Patient Race Not used Not used -

53
R315168
[Detailed explanation of fields]
1) 13.7 Quality Control
When outputting lot information, U-WAM saves the file saving quality control lot information in
shared holder, and outputs the file path to host.
Specifications of the files are as follows.
File name: [Analyzer Name] [QCTargetLimit] [Backup Date and Time] [QC File Number]
[Material Name] [Lot Number].csv
Description Maximum digit number Characters set
Analyzer names of the
Analyzer name instruments registered in U- 12 All characters
WAM
QCTargetLimit Fixed value 13 QCTargetLimit
Save date and time of files
Save date and time 6 Numeric character
YYMMDD
Save date and time of files
Save time 6 Numeric character
HHMMSS
QC file number
QC file number 4 Alphanumeric character
QC01 - QC50
Material Material name 100 All characters
Lot Lot No. 11 Alphanumeric character

Refer to Appendix J. Quality Control Lot Information for the content of the file.
Shared folder name is “QC Data”.

54
R315168
5.3.3.8. Message Termination Record
<Field definitions>
Host → U-WAM
ASTM U-WAM → Max. size
Field name Remarks
field necessary Host (bytes)

12.1 Record type ○ L L 1 Fixed

12.2 Sequence Number ○ 1 1 4 Always 1

12.3 Termination Code ○ N N 1 N: Terminated normally

55
R315168
6. Example of Communication
6.1. Order information
6.1.1. Order information in download mode
Registering a qualitative parameter order
ASTM LIS2-A2 (E1381-02 mode)
Host <ENQ>
U-WAM <ACK>
Host <STX>1H|\^&|||Host1||||||||LIS2-A2<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>2P|1||P00001||Sample^Ichiro ^^\Sample^Ichiro^^^||19701130|M||||||ANEG||||KIDNEY1||||||IP<
CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>3C|1||P^Patient Comment<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>4O|1|20150730001||^^^URO \^^^BLD\^^^BIL\^^^KET\^^^GLU\^^^PRO\^^^PH\^^^NIT\^^^LEU\^^^CRE\^
^^ALB\^^^S.G.(Ref)\^^^COLOR\^^^ColorRANK\^^^CLOUD\|A||20150730073000||||N||||Urine -
EarlyMorning|D00001^Doctor^Smith^^^Dr.|01-123-
4567|O2015073000000001||<ETB><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>5|||||O||W00001^East1FWard^04-5678-0123|||C00001^Urology<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>6C|1||S^Sample Comment<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>7L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <EOT>

Registering a sediment parameter order


ASTM LIS2-A2(E1381-02 mode)
Host <ENQ>
U-WAM <ACK>
Host <STX>1H|\^&|||Host1||||||||LIS2-A2<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>2P|1||P00001|| Sample^Ichiro^^\Sample^Ichiro^^^||19701130|M||||||ANEG||||KIDNEY1||||||IP<
CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>3C|1||P^Patient Comment<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>4O|1|20150730001||^^^RBC\^^^WBC\^^^WBC Clumps\^^^EC\^^^Squa.EC\^^^Non
SEC\^^^CAST\^^^Hy.CAST\^^^Path.CAST\^^^BACT\^^^X'TAL\^^^YLC\^^^SPERM\^^^MUCUS\|A||20150730073
000||||N||||Urine-EarlyMorning|D00001^Physician^Taro^^^Dr.|01 -123-
4567|O201<ETB><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>55073000000001|||||||O||W00001^East1FWard^04-5678-
0123|||C00001^Urology<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>6C|1||S^Sample Comment <CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>7L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <EOT>

56
R315168
ASTM E1381-95 mode
Host H|\^&|||Host1||||||||LIS2 -A2<CR>
P|1||P00001||Sample^Ichiro^^\Sample^Ichiro^^^||19701130|M||||||ANEG||||
KIDNEY1||||||IP<CR>
C|1||P^Patient Comment <CR>
O|1|20150730001||^^^RBC\^^^WBC\^^^WBC Clumps\^^^EC\^^^Squa.EC\
^^^Non SEC\^^^CAST\^^^Hy.CAST\^^^Path.CAST\^^^BACT\^^^X'TAL\
^^^YLC\^^^SPERM\^^^MUCUS\|A||20150730073000||||N||||Urine -EarlyMorning|
D00001^Physician^Taro^^^Dr.|01-123-4567|O2015073000000001|||||||O||W00001^ East1FWard^04-5678-
0123|||C00001^Urology<CR>
C|1||S^ Sample Comment <CR>
L|1|N<CR>

Registering a body fluid parameter order


ASTM LIS2-A2 (E1381-02 mode)
Host <ENQ>
U-WAM <ACK>
Host <STX>1H|\^&|||Host1||||||||LIS2-A2<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>2P|1||P00001|| Sample^Ichiro^^\Sample^Ichiro^^^||19701130|M||||||ANEG||||KIDNEY1||||||IP<
CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>3C|1||P^Patient Comment<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>4O|1|100101||^^^RBC-BF\^^^WBC-
BF\^^^MN#\^^^MN%\^^^PMN#\^^^PMN%\|A||20170307101000||||N|||||DX001^Freud^Sigmund^^^Dr|
05555111555|14000001|||||||O||WD1^Ward
1^021555555|||ONC^Oncology<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>5C|1||S^Sample Comment<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>6L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <EOT>

57
R315168
6.1.2. Order information in query mode
Order query from U-WAM and order registration from Host (UC -3500+UF-5000)
ASTM LIS2-A2 (E1381-02 mode)

Order query from U-WAM to Host


U-WAM <ENQ>
Host <ACK>
U-WAM <STX>1H|\^&|||U-WAM^00-08_Build008^11001^^^^AU501736||||||||LIS2 -
A2|20170307144247<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2Q|1|20150730001||||20170307144247||||||C<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <EOT>

Order information from Host to U-WAM


Host <ENQ>
U-WAM <ACK>
Host <STX>1H|\^&|||Host1||||||||LIS2-A2<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>2P|1||P00001|| Sample^Ichiro^^\Sample^Ichiro^^^||19701130|M||||||ANEG||||KIDNEY1||||||IP<
CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>3C|1||P^Patient Comment<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>4O|1|20150730001||^^^URO \^^^BLD\^^^BIL\^^^KET\^^^GLU\^^^PRO\^^^PH\^^^NIT\^^^LEU\^^^S.G.
(Ref)\^^^COLOR\^^^ColorRANK\^^^CLOUD\^^^RBC\^^^WBC\^^^WBC Clumps\^^^EC\^^^Squa.EC\^^^Non SEC
\^^^CAST\^^^Hy.CAST\^^^Path.CAST\^^^BACT\^^^X'TAL\^^^YLC\^^^SP<ETB><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>5ERM\^^^MUCUS\|A||20150730073000||||N||||Urine -
EarlyMorning|D00001^Physician^Taro^^^Dr.|01 -123-
4567|O2015073000000001|||||||O||W00001^East1FWard^04 -5678-
0123|||C00001^Urology<CR><ETX><CHK1><CHK2><CR><L F>
U-WAM <ACK>
Host <STX>6C|1||S^Sample Comment <CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>7L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <EOT>

58
R315168
Order query from U-WAM and order registration from Host (without order)
ASTM LIS2-A2 (E1381-02 mode)

Order query from U-WAM to Host


U-WAM <ENQ>
Host <ACK>
U-WAM <STX>1H|\^&|||U-WAM^00-08_Build008^11001^^^^AU501736||||||||LIS2 -
A2|20170307144247<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2Q|1|100101||||20170307144247||||||C<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <EOT>

Order information from Host to U-WAM


Host <ENQ>
U-WAM <ACK>
Host <STX>1H|\^&|||Host1|||||||||LIS2-A2<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>2P|1<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>3O|1|100101|||||||||N||||||||||||||O<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <ACK>
Host <STX>4L|1|N<CR><ETX><CHK1><CHK2><CR><LF>

59
R315168
6.2. Analysis result information
6.2.1. Urine chemistry analysis results
Sending results of analysis using the urine chemistry analyzer
<UC-3500, UC-1000>
ASTM LIS2-A2 (E1381-02 mode)
U-WAM <ENQ>
Host <ACK>
U-WAM <STX>1H|\^&|||U-WAM^00-08_Build008^11001^^^^AU501736||||||||LIS2 -
A2|20170307144247<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2P|1||P00001||Sample^Ichiro^^ \Sample^Ichiro^^^||19701130|M||||||ANEG||||||||||IP<CR><ETX
><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3O|1|12345678901234||^^^C -PH\^^^C-LEU\^^^C-NIT\^^^C-PRO\^^^C-GLU\^^^C-KET\^^^C-URO\^^^C-
BIL\^^^C-COLOR\^^^C-ColorRANK\^^^C-CLOUD\^^^C-CRE\^^^C-ALB\^^^C-P\C\^^^C-A/C\^^^C-
S.G.(Ref)\^^^C-
BLD\|R||20151211180241||||N|||20151211180247|*||||||||||<CR><ET B><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>4F<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>5R|1|^^^C-
PH^A^1^S^0002^01|7.5^RAW|||N||||^^admin^administrator||20151110105603|UC_3500<CR><ETX><CHK1>
<CHK2><CR><LF>
Host <ACK>
U-WAM <STX>6R|2|^^^C-PH^A^1^S^
0002^01|7.5^MAINFORMAT|||N||||^^admin^administrator||20151110105603|UC_3500
<CR><ETX><CHK1><CHK2><CR><LF >
Host <ACK>
U-WAM <STX>7R|3|^^^C-
LEU^A^1^S^0002^01|500^RAW|/μ l||N||||^^admin^administrator||20151110105603|UC_3500<CR><ETX><C
HK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>0R|4|^^^C-
LEU^A^1^S^0002^01|3+^MAINFORMAT|||N||||^^admin^administrator||20151110105603|UC_3500<CR><ETX>
<CHK1><CHK2><CR><LF>
Host <ACK>
(...omitted...)
U-WAM <STX>3R|31|^^^C-
S.G.(Ref)^A^1^S^0002^01|1.009^RAW|||N||||^^admin^administrator||2015111010 5603|UC_3500<CR><ET
X><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>4R|32|^^^C-
S.G.(Ref)^A^1^S^0002^01|1.009^MAINFORMAT|||N||||^^admin^administrator||20151110105603|UC_3500
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
<STX>5R|33|^^^C-
BLD^A^1^S^0002^01|0.75^RAW|mg/dL||N||||^^admin^administrator||20151110105603|UC_3500<CR ><ETX>
<CHK1><CHK2><CR><LF>
Host <ACK>
<STX>6R|34|^^^C-
BLD^A^1^S^0002^01|3+^MAINFORMAT|||N||||^^admin^administrator||20151110105603|UC_3500<CR><ETX>
<CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>5L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <EOT>

60
R315168
ASTM E1381-95 mode
U-WAM H|\^&|||U-WAM^00-03^11001^^^^BE198113||||||||LIS2 -A2|20151211180253<CR>
P|1|||||||U<CR>
O|1|12345678901234||^^^C-PH\^^^C-LEU\^^^C-NIT\^^^C-PRO\^^^C-GLU\^^^C-KET\^^^C-URO\^^^C-
BIL\^^^C-COLOR\^^^C-ColorRANK\^^^C-CLOUD\^^^C-CRE\^^^C-ALB\^^^C-P/C\^^^C-A/C\^^^C-
S.G.(Ref)\^^^C-BLD\|R||20151211180241||||N|||20151211180247|*||||||||||F<CR>
R|1|^^^C-PH^A^1^S^0002^01|7.5^RAW|||N||||^^admin^administrator||
20151110105603|UC_3500<CR>
R|2|^^^C-PH^A^1^S^ 0002^01|7.5^MAINFORMAT|||N||||^^admin^administrator
||20151110105603|UC_3500<CR>
R|3|^^^C-LEU^A^1^S^0002^01|500^RAW|/μ l||N||||^^admin^administrator
||20151110105603|UC_3500<CR>
R|4|^^^C-LEU^A^1^S^0002^01|3+^MAINFORMAT|||N||||^^admin^administrator
||20151110105603|UC_3500<CR>
(...omitted...)
R|31|^^^C-S.G.(Ref)^A^1^S^0002^01|1.009^RAW|||N||||^^admin^administrator
||20151110105603|UC_3500<CR>
R|32|^^^C-S.G.(Ref)^A^1^S^0002^01|1.009 ^MAINFORMAT|||N||||
^^admin^administrator||20151110105603|UC_3500<CR>
R|33|^^^C-BLD^A^1^S^0002^01|0.75^RAW|mg/dL||N||||^^admin^administrator
||20151110105603|UC_3500<CR>
R|34|^^^C-BLD^A^1^S^0002^01|3+^MAINFORMAT|||N||||^^admin^administrator
||20151110105603|UC_3500<CR>
L|1|N<CR>

61
R315168
6.2.2. Urine sediment analysis results
Sending results of analysis using the UF-5000 analyzer
ASTM LIS2-A2 (E1381-02 mode)
U-WAM <ENQ>
Host <ACK>
U-WAM <STX>1H|\^&|||U-WAM^00-08_Build008^11001^^^^AU501736||||||||LIS2 -
A2|20170307144247<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2P|1||P00001||Sample^Ichiro^^ \Sample^Ichiro^^^||19701130|M||||||ANEG||||||||||IP <CR><ETX>
<CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3O|1|20150800055||^^^RBC\^^^WBC\^^^WBC Clumps\^^^EC\^^^Squa.EC\^^^Non
SEC\^^^CAST\^^^Hy.CAST\^^^Path.CAST\^^^BACT\^^^X'TAL\^^^YLC\^^^SPERM\^^^MUCUS\^^^HIST_SF_FSC_P\^^^CW_FLL_AxCW
_FSC_W\^^^CW_FLH_PxCW_FSC_P\^^^CW_SSH_AxCW_FSC_W\^^^SF_DSS_PxS<ETB><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>4F_FSC_P\^^^CB_FLH_PxCB_FSC_P\^^^SF_FLL_WxSF_FLL_A\^^^CW_SSH_PxCW_FLL_P\^^^HIST_CW_SSH_P\
|A||20150731073054||||N|||20150731101621 |Urine-
EarlyMorning|D00001^Physician^Taro||O2015073100000055|||||||F||W00001^East1FWard|||C00001^ Urol
ogy <CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>5R|1|^^^RBC^A^1^S^000003^6|0.3^RAW|μ l||N||||^^admin^administrator||20150804141233|UF_500
0<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>6R|2|^^^RBC^A^1^S^000003^6|0.3^MAINFORMAT|/μ l||N||||^^admin^administrator||2015080414123
3|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>7R|3|^^^WBC^A^1^S^000003^6|0.0^RAW|μ l||N||||^^admin^administrator||20150804141233|UF_500
0<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>0R|4|^^^WBC^A^1^S^000003^6|0.0^MAINFORMAT|/μ l||N||||^^admin^administrator||2015080414123
3|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
(...omitted...)
U-WAM <STX>0R|23|^^^RBC -Info.^A^1^S^000001^1|0^RAW|||||||^^admin^administrator||20150804141233|UF_50
00<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>1R|24|^^^RBC -Info.^A^1^S^000001^1|0^MAINFORMAT|||||||^^admin^administrator||2015080414123
3|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
(...omitted...)
U-WAM <STX>0R|26|^^^RC_USER_1^A^1^RC^000003^6|^RAW|||>||||^^admin^administrator||20150804141233|UF_5
000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>1R|27|^^^RC_DC^A^1^RC^000003^6|^RAW|||>||||^^admin^administrator||20150804141233|UF_5000<
CR><ETX><CHK1><C HK2><CR><LF>
Host <ACK>
(...omitted...)
U-WAM <STX>1R|29|^^^HIST_SF_ FSC_P^A^1^IF^000003^6|20150804&R&PNG&E&R&E&[UF -5000&S&11001]&E&[20150804
_141233]&E&R&E&[ 20150800055]_[HIST_SF_FSC_P].png^RAW|||||||^^admin^administrator||20
150804141233|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2R|30|^^^CW_FLL_AxCW_FSC_W^A^1^IF^000003^6|201 50804&R&PNG&E&R&E&[UF-5000&S&11001]&E&[2015
0804_141233]&E&R&E& [ 20150800055]_[CW_FLL_AxCW_FSC_W].png^RAW|||||||^^admin^admini
strator||20150804141233|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3R|31|^^^CW_FLH_PxCW_F SC_P^A^1^IF^000003^6|20150804&R&PNG&E&R&E& [UF-5000&S&11001]&E&[2015
0804_141233]&E&R&E& [ 20150800055]_[CW_FLH_PxCW_FSC_P].png^RAW|||||||^^admin^admini
strator||20150804141233|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
(...omitted...)
62
R315168
U-WAM <STX>7R|37|^^^HIST_CW_SSH_P^A^1^IF^000003^6|20150804&R&PNG&E&R&E&[UF -5000&S&11001]&E&[20150804
_141233]&E&R&E&[ 20150800055]_[ HIST_CW_SSH_P].png^RAW|||||||^^admin^administrator|
|20150804141233|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>0L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <EOT>

ASTM E1381-95 mode


U-WAM H|\^&|||U-WAM^00-03^11001^^^^BE198113||||||||LIS2 -A2|20150804141533<CR>
P|1||P00055||Sample^Goro^^\Sample^Goro^^^||19330914|M||||||APOS||||||||||OP<CR>
O|1|20150800055||^^^RBC\^^^WBC\^^^WBC Clumps\^^^EC\^^^Squa.EC\^^^Non
SEC\^^^CAST\^^^Hy.CAST\^^^Path.CAST\^^^BACT\^^^X'TAL\^^^YLC\^^^SPERM\^^^MUCUS\^^^HIST_SF_FSC_
P\^^^CW_FLL_AxCW_FSC_W \^^^CW_FLH_PxCW_FSC_P\^^^CW_SSH_AxCW_FSC_W\^^^SF_DSS_PxS
F_FSC_P\^^^CB_FLH_PxCB_FSC_P\^^^SF_FLL_WxSF_FLL_A\^^^CW_SSH_PxCW_FLL_P\^^^HIST_CW_SSH_P\|A||2
0150731073054||||N|||20150731101621|Urine -
EarlyMorning|D00001^Physician^Taro||O2015073100000055|||||||F||W00001^East1FWard|||C00001^ Uro
logy<CR>
R|1|^^^RBC^A^1^S^000003^6|0.3^RAW|μ l||N||||^^admin^administrator||201 50804141233|UF_5000<CR>
R|2|^^^RBC^A^1^S^000003^6|0.3^MAINFORMAT|/μ l||N||||^^admin^administrator||20150804141233|UF_
5000<CR>
R|3|^^^WBC^A^1^S^000003^6|0.0^RAW|μ l||N||||^^admin^administrator||20150804141233|UF_5000 <CR>
R|4|^^^WBC^A^1^S^000003^6|0.0^MAINFORM AT|/μ l||N||||^^admin^administrator||20150804141233|UF_
5000<CR>
(...omitted...)
R|23|^^^RBC-Info.^A^1^S^000001^1|0^RAW|||||||^^admin^administrator||20150804141233|UF_5000 <CR
>
R|24|^^^RBC-Info.^A^1^S^000001^1|0^MAINFORMAT|||||||^^admin^administrator||2015080 4141233|UF_
5000<CR>
(...omitted...)
R|26|^^^RC_USER_1^A^1^RC^000003^6|^RAW|||>||||^^admin^administrator||20150804141233|UF_5000 <C
R>
R|27|^^^RC_DC^A^1^RC^000003^6|^RAW|||>||||^^admin^administrator||20150804141233|UF_5000 <CR>
(...omitted...)
R|29|^^^HIST_SF_FSC_P^A^1^IF^000003^6|20150804&R&PNG&E&R&E&[UF -
5000&S&11001]&E&[20150804_141233]&E&R&E&
[ 20150800055]_[HIST_SF_FSC_P].png^RAW|||||||^^admin^administrator||2015080414123
3|UF_5000<CR>
R|30|^^^CW_FLL_AxCW_FSC_W^A^1^IF^000003^6|20150804&R&PNG&E&R&E&[UF-
5000&S&11001]&E&[20150804_141233]&E&R&E&
[ 20150800055]_[CW_FLL_AxCW_FSC_W].png^RAW|||||||^^admin^administrator||201508041
41233|UF_5000<CR>
R|31|^^^CW_FLH_PxCW_FSC_P^A^1^IF^000003^6|201508 04&R&PNG&E&R&E&[UF-
5000&S&11001]&E&[20150804_141233]&E&R&E&
[ 20150800055]_[CW_FLH_PxCW_FSC_P].png^RAW|||||||^^admin^administrator||201508041
41233|UF_5000<CR>
(...omitted...)
R|37|^^^HIST_CW_SSH_P^A^1^IF^000003^6|20150804&R& PNG&E&R&E&[UF-
5000&S&11001]&E&[20150804_141233]&E&R&E&
[ 20150800055]_[HIST_CW_SSH_P].png^RAW|||||||^^admin^administrator||2015080414123
3|UF_5000<CR>
L|1|N<CR>

63
R315168
6.2.3. Visual examination results
Sending results of visual examination using U -WAM
ASTM LIS2-A2 (E1381-02 mode)
U-WAM <ENQ>
Host <ACK>
U-WAM <STX>1H|\^&|||U-WAM^00-08_Build008^11001^^^^AU501736||||||||LIS2 -
A2|20170307144247<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2P|1||P00001||Sample^Ichiro^^\Sample^Ichiro^^^||19701130|M||||||ANEG||||||||||IP<CR><ETX
><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3O|1|0000000369||^^^M-RBC\^^^M-WBC\^^^M-WBC Clumps\^^^M-EC\^^^M-Squa.EC\^^^M-OFB\^^^M-A
typ. C\^^^M-Hy.CAST\^^^M-MUCUS\^^^M-BACT\^^^M-YLC\^^^M-Trichomonas\^^^M-SPERM\^^^M-Non SEC\^
^^M-CAST\^^^M-Path.CAST\^^^M-X'TAL\|R||20151209095323||||N|||20151209095520|*|||123|||||||<ET
B><CHK1><CHK2><CR><LF>
Host <ACK>
<STX>4F<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
<STX>5R|1|^^^M-
RBC^M^1^S|<1/HPF^RAW|/HPF||N||||admin^administrator^admin^administrator||20151209165858|ENTER
ED<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
<STX>6R|2|^^^M-RBC^M^1^S|<1/HPF^MAINFORMAT|/HPF||N||||admin^administrator^admin^administrator
||20151209165858|ENTERED<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
<STX>7R|3|^^^M-WBC^M^1^S|30-
49/HPF^RAW|/HPF||N||||admin^administrator^admin^administrator||20151209165858|ENTERED<CR><ETX
><CHK1><CHK2><CR><LF>
Host <ACK>
<STX>0R|4|^^^M-WBC^M^1^S|30-
49/HPF^MAINFORMAT|/HPF||N||||admin^administrator^admin^administrator||20151209165858|E NTERED<
CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
(...omitted...)
U-WAM <STX>7R|11|^^^M-OFB^M^1^S|---
^RAW|||N||||admin^administrator^admin^administrator||20151209165858|ENTERED<CR><ETX><CHK1><CH
K2><CR><LF>
Host <ACK>
U-WAM <STX>0R|12|^^^M-OFB^M^1^S|---
^MAINFORMAT|||N||||admin^administrator^admin^administrator||20151209165858 |ENTERED<CR><ETX><C
HK1><CHK2><CR><LF>
Host <ACK>
(...omitted...)
U-WAM <STX>5R|33|^^^M-X'TAL^M^1^S|---
^RAW|||N||||admin^administrator^admin^administrator||20151209165858|ENTERED<CR><ETX><CHK1><CH
K2><CR><LF>
Host <ACK>
U-WAM <STX>6R|34|^^^M-X'TAL^M^1^S|---
^MAINFORMAT|||N||||admin^administrator^admin^administrator||20151209165858|ENTERED
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>7L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <EOT>

64
R315168
ASTM E1381-95 mode
U-WAM H|\^&|||U-WAM^00-03^11001^^^^BE198113||||||||LIS2 -A2|20151209170319<CR>
P|1||1||Test^Ur^^\Test^Ur^^^||20130116|M||||||APOS<CR>
O|1|0000000369||^^^M-RBC\^^^M-WBC\^^^M-WBC Clumps\^^^M-EC\^^^M-Squa.EC\^^^M-OFB\^^^M-Atyp. C
\^^^M-Hy.CAST\^^^M-MUCUS\^^^M-BACT\^^^M-YLC\^^^M-Trichomonas\^^^M-SPERM\^^^M-Non SEC\^^^M-CA
ST\^^^M-Path.CAST\^^^M-X'TAL\|R||20151209095323||||N|||20151209095520|*|||123|||||||F <CR>
R|1|^^^M-RBC^M^1^S|<1/HPF^RAW|/HPF||N||||admin^administrator^admin^
administrator||20151209165858|ENTERED <CR>
R|2|^^^M-RBC^M^1^S|<1/HPF^MAINFORMAT|/HPF||N||||admin^administrator^admin^
administrator||20151209165858|ENTERED <CR>
R|3|^^^M-WBC^M^1^S|30-49/HPF^RAW|/HPF||N||||admin^administrator^admin^
administrator||20151209165858|ENTERED<CR>
R|4|^^^M-WBC^M^1^S|30-
49/HPF^MAINFORMAT|/HPF||N||||admin^administrator^admin^administrator||20151209165858|ENTERED <
CR>
(...omitted...)
R|33|^^^M-X'TAL^M^1^S|---^RAW|||N||||admin^administrator^admin^
administrator||20151209165858|ENTERED <CR>
R|34|^^^M-X'TAL^M^1^S|---^MAINFORMAT|||N||||admin^administrator^admin^
administrator||20151209165858|ENTERED <CR>
L|1|N<CR>

65
R315168
6.2.4. Particle classification analysis results
Sending results of particle classification using U -WAM

ASTM LIS2-A2 (E1381-02 mode)


U-WAM <ENQ>
Host <ACK>
U-WAM <STX>1H|\^&|||U-WAM^00-08_Build008^11001^^^^AU501736||||||||LIS2 -
A2|20170307144247<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2P|1||P00001||Sample^Ichiro ^^\Sample^Ichiro^^^||19701130|M||||||ANEG||||||||||IP||||||||
||<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3O|1|120111T08UFH -105||^^^P-RBCs\^^^P-Iso RBCs\^^^P-WBCs\^^^P-WBC Clumps\^^^P-EC\^^^P-S
qua. EC\^^^P-Tran. EC\^^^P-RTEC\^^^P-Columnar EC\^^^P-OFB\^^^P-Atyp. C\^^^P-Hy. Casts\^^^P-E
pith. Casts\^^^P-Gra. Casts\^^^P-WAXY Casts\^^^P-FAT Casts\^^^
<ETB><CHK1><CHK2><CR><LF>
Host <ACK>
<STX>4P-RBC Casts\^^^P-WBC Casts\^^^P-Mucus\^^^P-Bacteria\^^^P-COCCI\^^^P-RODS\^^^P-
Fungi\^^^P-Yeast\^^^P-Trichomonas\^^^P-Urate\^^^P-Phosphate\^^^P-CaOxm X'TAL\^^^P-UA
X'TAL\^^^P-CaPh X'TAL\^^^P-Ammoni. MAG.\^^^P-Ammoni. Biu.\^^^P-Calc.
carbon.\<ETB><CHK1><CHK2><CR><LF>
Host <ACK>
<STX>5^^^P-Bilirubin\^^^P-Cystine\^^^P-Sperma\^^^P-RBC Clumps\^^^P-Dys RBC\^^^P-
Acanthocytes\^^^P-MN\^^^P-PMN\^^^P-NEUT\^^^P-LYMPH\^^^P-EO\^^^P-MONO\^^^P-Macrophages\^^^P-
Endometrial\^^^P-Mesothelial\^^^P-s-Squa. EC\^^^P-i/d-Squa. EC\^^^P-Non-Squ
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
<STX>6am. EC\^^^P-s-Tran. EC\^^^P-i/d-Tran. EC\^^^P-EC clumps\^^^P-IB\^^^P-Intracellular\^^^
P-H. papilloma\^^^P-H. polyoma\^^^P-Carcinoma\^^^P-ML\^^^P-Leukemia\^^^P-Casts\^^^P-N-hyal.
Casts\^^^P-VD Cast\^^^P-Salt/Crystal\^^^P-Mphi Cast\^^^P-Hemo Cas<CR><ETX><CHK1><CHK2><CR><L
F>
Host <ACK>
<STX>7t\^^^P-Myrogl Cast\^^^P-B-J Cast\^^^P-Fibrin Casts\^^^P-Broad Casts\^^^P-Bact
Casts\^^^P-BIL Cast\^^^P-Gram.Pos Bact\^^^P-Gram.Neg Bact\^^^P-Deform Bact\^^^P-
Filamentous\^^^P-Parasites\^^^P-Protozoa\^^^P-Helminths\^^^P-Amorph.\^^^P-
Crystals<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
<STX>0\^^^P-Cholesterol\^^^P-2-8-dihydro.\^^^P-Tyrosine\^^^P-Leucine\^^^P-Drug\^^^P-
Hemosiderin\^^^P-Amyloid body\^^^P-fat droplets\^^^P-
Artifacts\|R||20151207163114||||N|||20151207163121|*||||||||||F|<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>1R|1|^^^P-
RBCs^M^1^S|<1/HPF^RAW|μ l||N||||admin^administrator^admin^administrator||20151207164145|ENTER
ED<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2R|2|^^^P-
RBCs^M^1^S|<1/HPF^MAINFORMAT|/μ l||N||||admin^administrator^admin^administrator||20151207164
145|ENTERED<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3R|3|^^^P-Iso
RBCs^M^1^S|<1/HPF^RAW|μ l||N||||admin^administrator^admin^a dministrator||20151207164145|ENTER
ED<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>4R|4|^^^P-Iso
RBCs^M^1^S|<1/HPF^MAINFORMAT|/μ l||N||||admin^administrator^admin^administrator||201512071641
45|ENTERED<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>5R|5|^^^P-
WBCs^M^1^S|<1/HPF^RAW|μ l||N||||admin^administrator^admin^administrator||20151207164145|ENT ER
ED<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>6R|6|^^^P-
WBCs^M^1^S|<1/HPF^MAINFORMAT|/μ l||N||||admin^administrator^admin^administrator||201512071641
45|ENTERED<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
(...omitted...)
U-WAM <STX>2R|178|^^^P -Amyloid body^M^1^S|-

66
R315168
^MAINFORMAT|/μ l||N||||admin^administrator^admin^administrator||20151207164145|ENTERED
<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <STX>3R|179|^^^P -fat droplets^M^1^S|-
^RAW|μ l||N||||admin^administrator^admin^administrator||2015 1207164145|ENTERED
<CR><ETX><CHK1><CHK2><CR><LF>
U-WAM <STX>4R|180|^^^P -fat droplets^M^1^S|-
^MAINFORMAT|/μ l||N||||admin^administrator^admin^administrator||20151207164145|ENTERED
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>5R|181|^^^P -Artifacts^M^1^S|-
^RAW|μ l||N||||admin^administrator^admin^administrator||20151207164145|ENTERED
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>6R|182|^^^P -Artifacts^M^1^S|-
^MAINFORMAT|/μ l||N||||admin^administrator^admin^administrator||20151207164145|ENTERED
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>7L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <EOT>

ASTM E1381-95 mode


U-WAM H|\^&|||U-WAM^00-03^11001^^^^BE198113||||||||LIS2 -A2|20151209170319<CR>
P|1||1||Test^Ur^^\Test^Ur^^^||20130116|M||||||APOS<CR>
O|1|0000000369||^^^RBC \^^^WBC\^^^WBC Clumps\^^^EC\^^^Squa.EC\^^^M-OFB\^^^M-Atyp. C\^^^Hy.CAS
T\^^^MUCUS\^^^BACT\^^^YLC\^^^M-Trichomonas\^^^SPERM\^^^Non SEC\^^^CAST\^^^Path.CAST\^^^X'TAL
\|R||20151209095323||||N|||20151209095520|*|||123|||||||F <CR>
R|1|^^^RBC^M^1^S|<1/HPF^RAW|/HPF||N||||admin^administrator^admin^administrator||2015120916585
8|ENTERED<CR>
R|2|^^^RBC^M^1^S|<1/HPF^MAINFORMAT|/HPF||N||||admin^administrator^admin^administrator||201512
09165858|ENTERED <CR>
R|3|^^^WBC^M^1^S|30 -
49/HPF^RAW|/HPF||N||||admin^administrator^admin^administrator||20151209165858|ENTERED <CR>
R|4|^^^WBC^M^1^S|30 -
49/HPF^MAINFORMAT|/HPF||N||||admin^administrator^admin^administrator||20151209165858|ENTERED <
CR>
R|5|^^^WBC Clumps^M^1^S| ---
^RAW|||N||||admin^administrator^admin^administrator||20151209165858|ENTERED<CR>
(...omitted...)
R|11|^^^M-OFB^M^1^S|---^RAW|||N||||admin^administrator^admin^
administrator||20151209165858|ENTERED <CR>
R|12|^^^M-OFB^M^1^S|---
^MAINFORMAT|||N||||admin^administrator^admin^administrator||20151209165858|ENTERED <CR>
R|13|^^^M-Atyp. C^M^1^S|---^RAW|||N||||admin^administrator^admin^
administrator||20151209165858|ENTERED <CR>
(...omitted...)
R|33|^^^X'TAL^M^1^S|---^RAW|||N||||admin^administrator^admin^
administrator||20151209165858|ENTERED <CR>
R|34|^^^X'TAL^M^1^S|---
^MAINFORMAT|||N||||admin^administrator^admin^administrator||20151209165858|ENTERED <CR>
L|1|N<CR>

67
R315168
6.2.5. Body fluid sample analysis results
Sending results of analysis using the UF-5000 analyzer
ASTM LIS2-A2 (E1381-02 mode)
U-WAM <ENQ>
Host <ACK>
U-WAM <STX>1H|\^&|||U-WAM^00-08_Build008^11001^^^^AU501736||||||||LIS2 -
A2|20170307144247<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2P|1||P00001||Sample^Ichiro^^ \Sample^Ichiro^^^||19701130|M||||||ANEG||||||||||IP<CR><ETX
><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3O|1|2015082700000001||^^^RBC -BF\^^^WBC-
BF\^^^MN#\^^^MN%%\^^^PMN#\^^^PMN%%\|A||20150827073000||||N|||20150827120058|*|D00001^Physicia
n^Taro||O2015082700000001|||||||F||W00001^East1FWard|||C00001^Urology <CR><ETX><CHK1><CHK2><CR
><LF>
Host <ACK>
U-WAM <STX>4R|1|^^^RBC -
BF^A^1^S|0.0^RAW|μ l||N||||^^device||20150827121025|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>5R|2|^^^RBC -BF^A^1^S|0.0^MAINFORMAT|/μ l||N||||^^device||20150827121025|UF_5000
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>6R|3|^^^WBC -
BF^A^1^S|0.2^RAW|μ l||N||||^^device||20150827121025|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>7R|4|^^^WBC -BF^A^1^S|0.2^MAINFORMAT|/μ l||N||||^^device||20150827121025|UF_5000
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
(...omitted...)
U-WAM <STX>10R|10|^^^RC_MNPMN^A^1^S|^RAW|||>||||^^device||20150827121025|UF_5000
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
(...omitted...)
U-WAM <STX>0 R|13|^^^SF_DSS_PxSF_FSC_P-BF^A^1^IF|20150827&R&PNG&R&[UF-
5000^11001]&[20150827_121025]&R&[2015082700000001]_[SF_DSS_PxSF_FSC_P].png^RAW|||||||^^device
||20150827121025|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>1 R|14|^^^CW_SSH_AxCW_FSC_W -BF^A^1^IF|20150827&R&PNG&R&[UF-
5000^11001]&[201 50827_121025]&R&[2015082700000001]_[CW_SSH_AxCW_FSC_W].png^RAW|||||||^^device
||20150827121025|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2 R|15|^^^CW_FLL_AxCW_FSC_W-BF^A^1^IF|20150827&R&PNG&R&[UF-
5000^11001]&[20150827_121025]&R&[2015082700000001]_[CW_FLL_AxCW_FSC_W].png^RAW|||||||^^device
||20150827121025|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
(...omitted...)
U-WAM <STX>4 R|17|^^^CW_SSH_PxCW_FLL_P-BF^A^1^IF|20150827&R&PNG&R&[UF-
5000^11001]&[20150827_121025]&R&[2015082700000001]_[CW_SSH_PxCW_FLL_P].png^RAW|||||||^^device
||20150827121025|UF_5000<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>5L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <EOT>

68
R315168
ASTM E1381-95 mode
U-WAM H|\^&|||U-WAM^00-03^11001^^^^BE198113||||||||LIS2 -A2|20150827121546<CR>
P|1||P00001||Sample^Ichiro^^\Sample^Ichiro^^^||19701130|M||||||ANEG||||||||||IP<CR>
O|1|2015082700000001||^^^RBC -BF\^^^WBC-BF\^^^MN#\^^^MN%%\^^^PMN#\
^^^PMN%%\|A||20150827073000||||N|||20150827120058|*|D00001 ^Physician^Taro||
O2015082700000001|||||||F||W00001 ^East1FWard|||C00001^Urology <CR>
R|1|^^^RBC-BF^A^1^S|0.0^RAW|μ l||N||||^^device||20150827121025|UF_5000<CR>
R|2|^^^RBC-BF^A^1^S|0.0^MAINFORMAT|/μ l||N||||^^device||20150827121025|
UF_5000<CR>
R|3|^^^WBC-BF^A^1^S|0.2^RAW|μ l||N||||^^device||20150827121025|UF_ 5000<CR>
R|4|^^^WBC-BF^A^1^S|0.2^MAINFORMAT|/μ l||N||||^^device||20150827121025|
UF_5000<CR>
(...omitted...)
R|10|^^^WBC-BF^A^1^S|0.2^RAW |/μ l||N||||^^device||20150827121025|
UF_5000<CR>
(...omitted...)
R|13|^^^SF_DSS_PxSF_FSC_P-BF^A^1^IF|20150827&R&PNG&R&[UF-
5000^11001]&[20150827_121025]&R&[2015082700000001]_[SF_DSS_PxSF_FSC_P].png^RAW|||||||^^device
||20150827121025|UF_5000<CR>
R|14|^^^CW_SSH_AxCW_FSC_W -BF^A^1^IF|20150827&R&PNG&R&[UF-
5000^11001]&[20150827_121025]&R&[2015082700000001]_[CW_SSH_AxCW_FSC_W].png ^RAW|||||||^^device
||20150827121025|UF_5000<CR>
R|15|^^^CW_FLL_AxCW_FSC_W-BF^A^1^IF|20150827&R&PNG&R&[UF-
5000^11001]&[20150827_121025]&R&[2015082700000001]_[CW_FLL_AxCW_FSC_W].png^RAW|||||||^^device
||20150827121025|UF_5000<CR>
(...omitted...)
R|17|^^^CW_SSH_PxCW_FLL_P-BF^A^1^IF|20150827&R&PNG&R&[UF-
5000^11001]&[20150827_121025]&R&[2015082700000001]_[CW_SSH_PxCW_FLL_P].png^RAW|||||||^^device
||20150827121025|UF_5000<CR>
L|1|N<CR>

69
R315168
6.2.6. QC analysis results
Sending results of QC material (UF-CONTROL -L) using the UF-5000 analyzer
ASTM LIS2-A2 (E1381-02 mode)
U-WAM <ENQ>
Host <ACK>
U-WAM <STX>1H|\^&|||U-WAM^00-08_Build008^11001^^^^AU501736||||||||LIS2 -
A2|20170307144247<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2P|1<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3O|1|QC-UK0025LL||^^^RBC\^^^WBC\^^^EC\^^^CAST\^^^BACT\^^^Cond.\|||||||Q||||||||||||||F
<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>4R|1|^^^RBC^^1^S|41.8^RAW|μ l||||||||20150804103735|11001<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>5R|2|^^^WBC^^1^S|40.9^RAW|μ l||||||||20150804103735|11001<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>6R|3|^^^EC^^1^S|6.7^RAW|μ l||||||||20150804103735|11001<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>7R|4|^^^CAST^^1^S|1.96^RAW|μ l||||||||20150804103735|11001<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
(...omitted...)
U-WAM <STX>2 R|7|^^^CB _FLH_PxCB_FSC_P^^1^IF|20150804&R& PNG&E&R&E&[UF-5000&S&11001]&E&[20150804_103
735]&E&R&E&[ QC-UK0025LL]_[CB_FLH_PxCB_FSC_P].png|||||||||20150804103735|11001<CR
><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3 R|8|^^^CW _SSH_AxCW_FSC_W^^1^IF|20150804&R&PNG&E&R&E& [UF-5000&S&11001]&E&[20150804_103
735]&E&R&E&[ QC-UK0025LL]_[CW_SSH_AxCW_FSC_W].png|||||||||20150804103735|11001<CR
><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>4 R|9|^^^SF _DSS_PxSF_FSC_P^^1^IF|20150804&R&PNG&E&R&E&[UF -5000&S&11001]&E&[20150804_103
735]&E&R&E&[ QC-UK0025LL]_[SF_DSS_PxSF_FSC_P].png|||||||||20150804103735|11001<CR
><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>5 R|10|^^^SF_FLL_WxSF_FLL_A^^1^IF|20150804&R&PNG&E&R&E&[UF -5000&S&11001]&E&[20150804_10
3735]&E&R&E&[ QC-UK0025LL]_[SF_FLL_WxSF_FLL_A].png|||||||||20150804103735|11001<C
R><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>6L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <EOT>

70
R315168
ASTM E1381-95 mode
U-WAM H|\^&|||U-WAM^00-03^11001^^^^BE198113||||||||LIS2 -A2|20150804104512<CR>
P|1<CR>
O|1|QC-UK0025LL||^^^RBC\^^^WBC\^^^EC\^^^CAST\^^^BACT\^^^Cond.\|||||||Q||||||
||||||||F<CR>
R|1|^^^RBC^^1^S|41.8^RAW|μ l||||||||20150804103735|11001<CR>
R|2|^^^WBC^^1^S|40.9^RAW|μ l| |||||||20150804103735|11001<CR>
R|3|^^^EC^^1^S|6.7^RAW|μ l||||||||20150804103735|11001 <CR>
R|4|^^^CAST^^1^S|1.96^RAW|μ l||||||||20150804103735|11001 <CR>
R|7|^^^CB_FLH_PxCB_FSC_P^^1^IF|20150804&R&PNG&E&R&E&[UF -5000&S&11001]&E&[20150804_103735]&E&R
&E&[ QC-UK0025LL]_[CB_FLH_PxCB_FSC_P].png|||||||||20150804103735|11001 <CR>
(...omitted...)
R|8|^^^CW_SSH_AxCW_FSC_W^^1^IF|20150804&R&PNG&E&R&E&[UF -5000&S&11001]&E&[20150804_103735]&E&R
&E&[ QC-UK0025LL]_[CW_SSH_AxCW_FSC_W].png|||||||||20150804103735|11001 <CR>
R|9|^^^SF_DSS_PxSF_FSC_P^^1^IF|20150804&R&PNG&E&R&E&[UF -5000&S&11001]&E&[20150804_10373 5]&E&R
&E&[ QC-UK0025LL]_[SF_DSS_PxSF_FSC_P].png|||||||||20150804103735|11001 <CR>
R|10|^^^SF_FLL_WxSF_FLL_A^^1^I F|20150804&R&PNG&E&R&E&[UF -5000&S&11001]&E&[20150804_103735]&E&
R&E&[ QC-UK0025LL]_[SF_FLL_WxSF_FLL_A].png|||||||||20150804103 735|11001<CR>
L|1|N<CR>

Sending results of QC material (qualitative and concentration value) using the chemistry analyzer.
ASTM LIS2-A2 (E1381-02 mode)
U-WAM <ENQ>
Host <ACK>
U-WAM <STX>1H|\^&|||U-WAM^00-08_Build008^11001^^^^AU501736||||||||LIS2 -
A2|20170307144247<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2P|1<CR><ETX>3F<CR><LF>
Host <ACK>
U-WAM <STX>3O|1|QC-UCC91603|||||||||Q||||||||||||||F<CR><ETX>15<CR><LF>
Host <ACK>
U-WAM <STX>4R|1|^^^URO^^1^S|2+^RAW|||||||||20160608131951|59<CR><ETX>9F<CR><LF>
Host <ACK>
U-WAM <STX>5R|2|^^^URO^^1^S|4.0^MAINFORMAT|mg/dL||||||||20160608131951|59<CR><ETX>8D<CR><LF>
Host <ACK>
U-WAM <STX>6R|3|^^^BLD_H^^1^S|2+^RAW|||||||||20160608131951|59<CR><ETX>26<CR><LF>
Host <ACK>
U-WAM <STX>7R|4|^^^BLD_H^^1^S|0.15^MAINFORMAT|mg/dL||||||||20160608131951|59<CR><ETX>46<CR><LF>
Host <ACK>
U-WAM <STX>0R|5|^^^BIL^^1^S|3+^RAW|||||||||20160608131951|59<CR><ETX>81<CR><LF>
Host <ACK>
U-WAM <STX>1R|6|^^^BIL^^1^S|2.0^MAINFORMAT|mg/dL||||||||2016 0608131951|59<CR><ETX>6C<CR><LF>
Host <ACK>
U-WAM <STX>2R|7|^^^KET^^1^S|2+^RAW|||||||||20160608131951|59<CR><ETX>91<CR><LF>
Host <ACK>
U-WAM <STX>3R|8|^^^KET^^1^S|30^MAINFORMAT|mg/dL||||||||20160608131951|59<CR><ETX>50<CR><LF>
(...omitted...)
U-WAM <STX>2R|23|^^^S.G.(Ref)^^1^S|^RAW|||||||||20160608131951|59<CR><ETX>E2<CR><LF>
Host <ACK>
U-WAM <STX>3R|24|^^^S.G.(Ref)^^1^S|1.024^MAINFORMAT|||||||||20160608131951|59<CR><ETX>DD<CR><LF>
Host <ACK>
U-WAM <STX>4L|1|N<CR><ETX>07<CR><LF>
Host <ACK>
U-WAM <EOT>

71
R315168
ASTM E1381-95 mode
U-WAM H|\^&|||U-WAM^00-05_Build007^11001^^^^AU501736||||||||LIS2 -A2|
20160608175033<CR>
P|1<CR>
O|1|QC-UCC91603|||||||||Q||||||||||||||F<CR>
R|1|^^^URO^^1^S|2+^RAW|||||||||20160608131951|59<CR>
R|2|^^^URO^^1^S|4.0^MAINFORMAT|mg/dL||||||||20160608131951|59<CR>
R|3|^^^BLD_H^^1^S|2+^RAW|||||||||20160608131951|59<CR>
R|4|^^^BLD_H^^1^S|0.15^MAINFORMAT|mg/dL||||||||20160608131951|59<CR>
R|5|^^^BIL^^1^S|3+^RAW|||||||||20160608131951|59<CR>
R|6|^^^BIL^^1^S|2.0^MAINFORMAT|mg/dL||||||||20160608131951|59<CR>
R|7|^^^KET^^1^S|2+^RAW|||||||||20160608131951|59<CR>
R|8|^^^KET^^1^S|30^MAINFORMAT|mg/dL||||||||20160608131951|59<CR>
(...omitted...)
R|23|^^^S.G.(Ref)^^1^S|^RAW|||||||||20160608131951|59<CR>
R|24|^^^S.G.(Ref)^^1^S|1.024^MAINFORMAT|||||||||20160608131951|59<CR>
L|1|N<CR>

Sending results of QC material (reflectivity value) using the chemistry analyzer


ASTM LIS2-A2 (E1381-02 mode)
U-WAM <ENQ>
Host <ACK>
U-WAM <STX>1H|\^&|||U-WAM^00-08_Build008^11001^^^^AU501736||||||||LIS2 -
A2|20170307144247<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2P|1<CR><ETX>3F<CR><LF>
Host <ACK>
U-WAM <STX>3O|1|QC-UCC91603|||||||||Q||||||||||||||F<CR><ETX>15<CR><LF>
Host <ACK>
U-WAM <STX>4R|1|^^^URO^^1^S|67.800^RAW|%||||||||20160607173829|59<CR><ETX>A3<CR><LF>
Host <ACK>
U-WAM <STX>5R|2|^^^URO^^1^S|^MAINFORMAT|%||||||||20160607173829|59<CR><ETX>76<C R><LF>
Host <ACK>
U-WAM <STX>6R|3|^^^BLD_H^^1^S|18.800^RAW|%||||||||20160607173829|59<CR><ETX>26<CR><LF>
Host <ACK>
U-WAM <STX>7R|4|^^^BLD_H^^1^S|^MAINFORMAT|%||||||||20160607173829|59<CR><ETX>FD<CR><LF>
Host <ACK>
U-WAM <STX>0R|5|^^^BIL^^1^S|81.400^RAW|%||||||||20160607173829|59<CR><ETX>7C<CR><LF>
Host <ACK>
U-WAM <STX>1R|6|^^^BIL^^1^S|87.800^MAINFORMAT|%||||||||20160607173829|59<CR><ETX>8C<CR><LF>
Host <ACK>
U-WAM <STX>2R|7|^^^KET^^1^S|79.900^RAW|%||||||||20160607173829|59<CR><ETX>99<CR><LF>
Host <ACK>
U-WAM <STX>3R|8|^^^KET^^1^S|^MAINFORMAT|%||||||||20160607173829|59<CR><ETX>68<CR><LF>
(...omitted...)
U-WAM <STX>2R|23|^^^S.G.(Ref)^^1^S|^RAW|||||||||20160607173829|59<CR><ETX>EB<CR><LF>
Host <ACK>
U-WAM <STX>3R|24|^^^S.G.(Ref)^^1^S|1.024^MAINFORMAT|||||||||20160607173829|59<CR><ETX>E6<CR><LF>
Host <ACK>
U-WAM <STX>4L|1|N<CR><ETX>07<CR><LF>
Host <ACK>
U-WAM <EOT>

ASTM E1381-95 mode


U-WAM H|\^&|||U-WAM^00-05_Build007^11001^^^^AU501736||||||||LIS2 -A2|
20160607175737<CR>
P|1<CR>
O|1|QC-UCC91603|||||||||Q||||||||||||||F<CR>
R|1|^^^URO^^1^S|67.800^RAW|%||||||||20160607173829|59<CR>
R|2|^^^URO^^1^S|^MAINFORMAT|%||||||||20160607173829|59<CR>
R|3|^^^BLD_H^^1^S|18.800^RAW|%||||||||20160607173829|59<CR>
R|4|^^^BLD_H^^1^S|^MAINFORMAT|%||||||||20160607173829|59<CR>
R|5|^^^BIL^^1^S|81.400^RAW|%||||||||20160607173829|59<CR>
R|6|^^^BIL^^1^S|87.800^MAINFORMAT|%||||||||20160607173829|59<CR>
R|7|^^^KET^^1^S|79.900^RAW|%||||||||20160607173829|59<CR>

72
R315168
R|8|^^^KET^^1^S|^MAINFORMAT|%||||||||20160607173829|59<CR>
(...omitted...)
R|23|^^^S.G.(Ref)^^1^S|^RAW|||||||||20160607173829|59<CR>
R|24|^^^S.G.(Ref)^^1^S|1.024^MAINFORMAT|||||||||20160607173829|59<CR>
L|1|N<CR>

6.3. Quality Control


6.3.1. Quality control lot information output
ASTM LIS2-A2 (E1381-02 mode)
U-WAM <ENQ>
Host <ACK>
U-WAM <STX>1H|\^&|||U-WAM^00-08_Build008^11001^^^^AU501736||||||||LIS2 -
A2|20170307144247<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>2S|1|||||[UF-5000]_[QCTargetLimit]_[20170307_144247]_[QC01]_[UF-Control-H]_[QC-
UK0003].csv<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <STX>3L|1|N<CR><ETX><CHK1><CHK2><CR><LF>
Host <ACK>
U-WAM <EOT>

ASTM E1381-95 mode


U-WAM H|\^&|||Host1||||||||LIS2 -A2|20170307144247<CR>
S|1|||||[UF-5000]_[QCTargetLimit]_[20170307_144247]_[QC01]_[UF-Control-H]_[QC-UK0003].csv<CR>
L|1|N<CR>

73
R315168
Appendix A. TCP/IP Communication
A.1 Software
1) Data link/ Network/ Transport layer
The IP address of the host computer is set in the user settings screen of U-WAM.
The TCP port number used for communications with the host computer is set to 6001 by default. The
port number can be changed in the user settings screen of U -WAM.

2) Session layer
To establish the connection, the host computer acts as a server and the IPU acts as a client. U-WAM
confirms the connection at the time of startup. If connection fails, reconnection attempts will be made at
a set interval.

74
R315168
Appendix B. Analysis Parameters
For item details by analyzer, refer to the details of each profile in B.1 to B.7.

Appendix C. Research Information


Research information that U-WAM can output to the host are indicated below.
<UF-3000/3000x/4000/5000>

Research information
Data value Units Remarks
name

0: No judgment
1: RBC: Isomorphic?
RBC-Info. 0, 1, 2, 3 *1
2: RBC: Dysmorphic?
3: RBC: Mixed?
0: No judgment
UTI-Info. 0, 1 *1
1: UTI: UTI?
0: No judgment
1: BACT: Gram Negative?
BACT-Info. 0, 1, 2, 3, 4 *1 2: BACT: Gram Positive?
3: BACT: Gram Pos/Neg?
4: BACT: Unclassified

*1: Units are not output.


* Research information orders cannot be registered to U -WAM from the host computer.
* Research information may not be output depending on the setting of U -WAM.
* For details on the research information, refer to “6.2.1 Urine chemistry analysis results”.

75
R315168
Appendix D. Review Comments
Review comments that U-WAM can output to the host are indicated below.
D.1 Urine Sediment (Profile: UF)
<UF-3000/3000x/4000/5000>

Review comment name * 1 * 2 Display conditions

RC_USER_1 Results judged as requiring REVIEW based on the REVIEW judgment settings
on the UF analyzer
RC_USER_2 Results judged as requiring REVIEW based on the REVIEW judgment settings
on the UF analyzer
RC_USER_3 Results judged as requiring REVIEW based on the REVIEW judgment settings
on the UF analyzer
RC_USER_4 Results judged as requiring REVIEW based on the REVIEW judgment settings
on the UF analyzer
RC_USER_5 Results judged as requiring REVIEW based on the REVIEW judgment settings
on the UF analyzer
RC_USER_6 Results judged as requiring REVIEW based on the REVIEW judgment settings
on the UF analyzer
RC_USER_7 Results judged as requiring REVIEW based on the REVIEW judgment settings
on the UF analyzer
RC_UNIVERSAL Results judged as requiring REVIEW based on the REVIEW judgment settings
on the UF analyzer
RC_DEBRIS A high DEBRIS value occurred
RC_RBCYLC RBC/YLC fraction error occurred
Fraction is difficult due to the overlapping position of RBC and YLC particles.
RC_DC Abnormal urine conductivity occurred
Tangible components such as RBC and WBC may have broken down and were
not correctly measured
RC_RBC_Carryover Carryover from previous high-concentration RBC sample suspected
RC_WBC_Carryover Carryover from previous high-concentration WBC sample suspected
RC_BACT_Carryover Carryover from previous high-concentration BACT sample suspected
RC_SPERM_Carryover*3 Carryover from previous high-concentration SPERM sample suspected
RC_MeasuringInterval_UF Analysis results is out of measuring interval

76
R315168
D.2 Body Fluid (Profile: BF)
<UF-3000/3000x>

Review comment name * 1 * 2 Display conditions

RC_WBCLowReliability WBC low reliability occurred


RC_MeasuringInterval_BF Analysis results is out of measuring interval

<UF-4000/5000>

Review comment name * 1 * 2 Display conditions

RC_MNPMN MN/PMN fraction error occurred


RC_WBCLowReliability WBC low reliability occurred
RC_MeasuringInterval_BF Analysis results is out of measuring interval

*1 For details on the review comments, refer to “6.2.2 Urine sediment analysis results”,
“6.2.5 Body fluid sample analysis results”.
*2 For review comment names that are output to the host computer, refer to “F.3 Review Comments
(Result Type “RC”)”.
*3 In case of UF-5000/4000 North America specification, RC_SPERM_Carryover is outputted and
displayed.In case of UF-3000/3000x North America specification, RC_SPERM_Carryover is not
outputted and displayed.

77
R315168
Appendix E. Scatter Images
Scatter images that U-WAM can output to the host are indicated below. When U-WAM outputs results
to the host computer, the scatter images that can be output vary by country/region and by the type of
analyzer that is connected to U-WAM.
Scatter images that can be output are indicated by “○”.

E.1 Urine Sediment (Profile: UF)


<UF-3000/3000x/4000/5000>
Country/region
Scatter image name North
Japan China Taiwan Korea Other
America
SF_FLH_PxSF_FSC_P
SF_DSS_PxSF_FSC_P ○ ○ ○ ○ ○ ○
CW_FLL_AxCW_FSC_W ○ ○ ○ ○ ○ ○
SF_FLL_WxSF_FLL_A ○ ○ ○ ○ ○ ○
CB_FLH_PxCB_FSC_P ○ ○ ○ ○ ○ ○
CW_FLH_PxCW_FSC_P ○ ○ ○ ○ ○ ○
CW_SSH_AxCW_FSC_W ○ ○ ○ ○ ○ ○
CW_FLH_PxCW_SSH_P
HIST_SF_FSC_P ○ ○ ○ ○ ○ ○
CW_SSH_PxCW_FLL_P ○ ○ ○ ○ ○ ○
HIST_CW_SSH_P ○ ○ ○ ○ ○ ○

78
R315168
E.2 Body Fluid (Profile: BF)
<UF-3000/3000x>
Country/region
Scatter image name North
Japan China Taiwan Korea Other
America
SF_DSS_PxSF_FSC_P-BF ○ ○ ○ ○
CW_FLL_AxCW_FSC_W-BF ○ ○ ○ ○
CW_SSH_PxCW_FLL_P-BF
CB_FLH_PxCB_FSC_P-BF
CW_SSH_AxCW_FSC_W-BF ○ ○ ○ ○
CW_FLH_PxCW_SSH_P-BF
HIST_SF_FSC_P-BF

<UF-4000/5000>
Country/region
Scatter image name North
Japan China Taiwan Korea Other
America
SF_DSS_PxSF_FSC_P-BF ○ ○ ○ ○
CW_FLL_AxCW_FSC_W-BF ○ ○ ○ ○
CW_SSH_PxCW_FLL_P-BF ○ ○ ○ ○
CB_FLH_PxCB_FSC_P-BF ○ ○ ○ ○
CW_SSH_AxCW_FSC_W-BF ○ ○ ○ ○
CW_FLH_PxCW_SSH_P-BF
HIST_SF_FSC_P-BF

79
R315168
E.3 QC Parameters
QC parameters that can be output are the same regardless of country/region and analyzer type.

Scatter image name Output


SF_FLH_PxSF_FSC_P
SF_DSS_PxSF_FSC_P ○
CW_FLL_AxCW_FSC_W
SF_FLL_WxSF_FLL_A ○
CB_FLH_PxCB_FSC_P ○
CW_FLH_PxCW_FSC_P
CW_SSH_AxCW_FSC_W ○
CW_FLH_PxCW_SSH_P
HIST_SF_FSC_P

80
R315168
Appendix F. Parameter Names for Host Transmission
The following indicates the parameter names for host transmission that are set in result messages when
U-WAM outputs results to the host computer.

F.1 Reportable Parameters and Research Parameters (Result Type “S”)


The parameter names for host computer transmission set in U-WAM are set.
By default, the values in the “Name for host transmission” column defined in each table of “ Appendix
B. Analysis Parameters” are set as the names for host transmission.
* In QC parameters, the values in “Name for host transmission” column are fixed regardless of the
settings.

F.2 Research Information (Result Type “S”)


The research information defined in “Appendix C. Research Information” can be output from U-WAM.
The “Research information name” in the table in “ Appendix C. Research Information”, not a user setting
name, is set as the parameter name for host transmission.

F.3 Review Comments (Result Type “RC”)


The review comments defined in “Appendix D. Review Comments” can be output from U-WAM. The
“Review Comment Name” in the table in “Appendix D. Review Comments”, not a user setting name, is
set as the parameter name for host transmission.

F.4 Scatter Images (Result Type “IF”)


The scatter images defined in “Appendix E. Scatter Images” can be output from U-WAM. The “Scatter
Image Name” in the table in “Appendix E. Scatter Images” is set as the parameter name for host
transmission.

81
R315168
Appendix G. Shared Folder for Scatter Images
Scatter images shared with the host computer are accessed in a shared folder.
<Scatter image folder shared with host computer>
Shared folder name: “Foo”
The “(date folder)”/“(scatter image file name)” in the shared folder is set as the scatter image file path
in the result message. (Refer to “9.4 Data Value” in section 5.3.3.4.)

U-WAM converts the escape character used for the folder path with the following rule.
< Conversion rule>
"&R&" -> " \ "
"&E&" -> "&"
"&S&" -> "^"

< Conversion example >


[Before conversion]
20160726 \ PNG&R&[UF-5000^11001]&[20160726_070000]&R&[ QC-UF0001HL]_[CB_FL
H_PxCB_FSC_P].png
[After conversion]
20160726&R&PNG&E&R&E&[UF-5000&S&11001]&E&[20160726_070000]&E&R&E&[ QC-
UF0001HL]_[CB_FLH_PxCB_FSC_P].png

* The path of a shared folder is valid only for samples of urine qualitative analysis/body fluid
analysis/QC analysis that are analysed within 30 days.
The scattergram of samples that are analysed more than 30 days ago cannot be accessed.

82
R315168
Appendix H. Units
<For urine sediment, body fluid, and particle classification>
The units that are set when U-WAM sends Main Format results to the host computer vary by parameter
and result format. Units that can be set are indicated below.

Units
mOsm/kg
%
mg/dL
count
/LPF
/ml
/HPF
/µl
ch
mS/cm
Qualitative
µ mol/L
mmol/L
g/L
c/μL

Appendix I. Disease Information


Patient disease codes that can be set from the host computer are indicated below.
Only one can be set.
<Disease Codes>
Disease Code Disease Information
KIDNEY1 Acute/chronic glomerulonephritis
KIDNEY2 Progressive glomerulonephritis
KIDNEY3 IgA nephritis
KIDNEY4 Nephrotic syndrome
KIDNEY5 Focal sclerosing glomerulonephritis
KIDNEY6 Membranous proliferative nephritis
KIDNEY7 Membranous proliferative glomerulonephritis
KIDNEY8 Acute/chronic tubulointerstitial nephritis
KIDNEY9 Purpura nephritis
KIDNEY10 Acute renal insufficiency
KIDNEY11 Chronic kidney disease
KIDNEY12 Acute/chronic renal failure
KIDNEY13 Diabetic nephropathy
KIDNEY14 Fanconi syndrome
KIDNEY15 Nephrosclerosis

83
R315168
Disease Code Disease Information
KIDNEY16 Renal infarction
KIDNEY17 Kidney damage caused by desmosis
KIDNEY18 Lupus nephritis
KIDNEY19 Scleroderma kidney
KIDNEY20 Polyarteritis nodosa
KIDNEY21 Wegener granulomatosis
KIDNEY22 ANCA-associated glomerulonephritis
KIDNEY23 Goodpasture syndrome
KIDNEY24 Sjogren syndrome
KIDNEY25 Nephrogenic diabetes insipidus
KIDNEY26 Simple renal cyst
KIDNEY27 Multicystic renal cyst
KIDNEY28 Pyelolithiasis
KIDNEY29 Renal cell carcinoma
KIDNEY30 Embryonal adenosarcoma
BLADDER1 Bladder cancer
BLADDER2 Renal pelvis carcinoma
BLADDER3 Urethral cancer
BLADDER4 Prostate cancer
BLADDER5 Prostatic hypertrophy

BLADDER6 Acute urinary tract infection

BLADDER7 Chronic urinary tract infection

BLADDER8 Pyelonephritis

BLADDER9 Cystitis

BLADDER10 Prostatitis

BLADDER11 Urethritis

BLADDER12 Trichomonas vaginitis

BLADDER13 Hydronephrosis

BLADDER14 Ureteral stone

BLADDER15 Kidney transplant

84
R315168
Appendix J. Quality Control Lot Information
Specifications of quality control lot information files are output in CSV format as follows.
File specifications of quantitative quality control differ from that of UF and that of UD.
Refer to B.7 QC Parameters for the specifications of the parameters of quality control.
<Quantitative quality control lot information file>
1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 11th 12th 13th 14th 15th
column column column column column column column column column column column column column column column
1st row Quality QC file Analyzer Lot No. Expiration Expiration Registratio Material
Control number name_ date for use date n date name
File Serial No.
2nd row

3rd row Quality Parameter Reflectance Reflectance Reflectance Reflectance Reflectance Reflectance Reflectance Reflectance Reflectance Reflectance Rank Rank
or later Control name 1 target 1 upper 1 lower 1 limit 1 limit 2 target 2 upper 2 lower 2 limit 2 limit Upper Lower
Qualitati limit value limit value width (#) width (%) limit value limit value width (#) width (%) limit limit
veTarget value value
Limit

<UF, UD quality control lot information file>


1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 11th 12th 13th 14th 15th
column column column column column column column column column column column column column column column
1st row Quality QC file Analyzer Lot No. Expiration Expiration Registration Material
Control number name_ date for use date date name
File Serial No.

2nd row

3rd row Quality Parameter Target Upper limit Lower Limit Limit
or later Control name value value limit value width (#) width (%)
TargetLi
mit

85
R315168
<Quantitative quality control lot information file>

QualityControlFile,,3,UC-3500_00001,003,2016/8/25 14:13,2016/8/25 14:13,2016/8/25 14:13,UCControl -L,,,,,,


,,,,,,,,,,,,,,
QualityControlQualitativeTargetLimit,,URO,541.450,999.900,83.000,458.450,84.671,0.000,0.000,0.000,0.000,0.000,1.000,1.000
QualityControlQualitativeTargetLimit,,BLD_H,534.450,999.900,69.000,465.450,87.090,0.000,0.000,0.000,0.000,0.000,1.000,1.000
QualityControlQualitativeTargetLimit,,BIL,549.200,999.900,98.500,450.700,82.065,548.700,999.900,97.500,451.200,82.231,1.000,1 .000
QualityControlQualitativeTargetLimit,,KET,543.950,999.900,88.000,455.950,83.822,0.000,0.000,0.000,0.000,0.000,1.000,1.000
QualityControlQualitativeTargetLimit,,GLU,538.450,999.900,77.000,461.450,85.700,540.450,999.900,81.000,459.450,85.012,1.000,1.000
QualityControlQualitativeTargetLimit,,PRO,550.450,999.900,101.000,449.450,81.651,0.000,0.000,0.000,0.000,0.000,1.000,1.000
QualityControlQualitativeTargetLimit,,pH,570.450,999.900,141.000,429.450,75.283,0.000,0.000,0.000,0.000,0.000,3.000,1.000
QualityControlQualitativeTargetLimit,,NIT,551.950,999.900,104.000,447.950,81.158,0.000,0.000,0.000,0.000,0.000,1.000,1.000
QualityControlQualitativeTargetLimit,,LEU,543.950,999.900,88.000,455.950,83.822,0.000,0.000,0.000,0.000,0.000,1.000,1.000
QualityControlQualitativeTargetLimit,,CRE,517.200,999.900,34.500,482.700,93.329,0.000,0.000,0.000,0.000,0.000,2.000,1.000
QualityControlQualitativeTargetLimit,,ALB,546.200,999.900,92.500,453.700,83.065,0.000,0.000,0.000,0.000,0.000,1.000,1.000
QualityControlQualitativeTargetLimit,,S.G,0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.000,0.000,1.017,1.003

86
R315168
<UF, UD quality control lot information file>

QualityControlFile,,2,UF-5000_11002,UF5000H,2016/9/25 00:00,2016/9/25 00:00,2016/8/26 00:00,UF -control-H,,,,,,


,,,,,,,,,,,,,,
QualityControlTargetLimit,,RBC,189.400,227.300,151.500,37.900 ,20.000,,,,,,,
QualityControlTargetLimit,,WBC,744.200,893.000,595.400,148.800,19.900,,,,,,,
QualityControlTargetLimit,,EC,81.000,121.500,40.500,40.500,50.000,,,,,,,
QualityControlTargetLimit,,CAST,18.100,27.150,9.050,9.050,50.000,,,,,,,
QualityControlTargetLimit,,BACT,823.700,1029.600,617.800,205.900,24.900,,,,,,,
QualityControlTargetLimit,,Cond.,36.700,50.400,23.000,13.700,37.300,,,,,,,
QualityControlTargetLimit,,SF_FSC_P,126.300,153.700,98.900,0.000,0.000,,,,,,,
QualityControlTargetLimit,,SF_FSC_W,40.700,58.300,23.100,0.000,0.000,,,,,,,
QualityControlTargetLimit,,SF_FLH_P,74.200,133.900,14.500,0.000,0.000,,,,,,,
QualityControlTargetLimit,,SF_SSL_P,216.900,226.300,207.500,0.000,0.000,,,,,,,
QualityControlTargetLimit,,SF_DSS_P,201.900,215.700,188.100,0.000,0.000,,,,,,,
QualityControlTargetLimit,,CW_FSC_P,101.600,112.300,90.900,0.000,0.000,,,,,,,
QualityControlTargetLimit,,CW_FLH_P,81.300,103.700,58.900,0.000,0.000,,,,,,,
QualityControlTargetLimit,,CW_SSH_P,124.200,133.900,114.500,0.000,0.000,,,,,,,
QualityControlTargetLimit,,CW_SSL_P,64.200,101.900,26.500,0.000,0.000,,,,,,,
QualityControlTargetLimit,,CW_DSS_P,40.300,56.400,24.200,0.000,0.000,,,,,,,
QualityControlTargetLimit,,CB_FSC_P,141.900,14 6.300,137.500,0.000,0.000,,,,,,,
QualityControlTargetLimit,,CB_FLL_P,131.900,171.500,92.300,0.000,0.000,,,,,,,
QualityControlTargetLimit,,CB_SSH_P,175.700,188.300,163.100,0.000,0.000,,,,,,,

87
R315168
<Rank value of quantitative quality control>
The upper and lower rank limit values output to the 14th and 15th columns of the qualitative QC lot information file are upper and lower limit va lues of QC. Rank
value set in the user setting menu of U-WAM is output.
Rank value set in the user setting menu of U -WAM is output.
Example: When the user settings are as shown below and the upper pH limit is set to 6.0 and the lower pH limit is set to 5.0 when the lot is registered for QC,
3 is output to the 14th column and 1 is output to the 15th column of the qualitative QC lot in formation file.

<Quantitative quality control lot information file>

QualityControlQualitativeTargetLimit,,pH,570.450,999.900,141.000,429.450,75.283,0.000,0.000,0.000,0.000,0.000, 3.000,1.000

[User setting dialog] [Lot registration information input dialog]

88
R315168
Appendix K. Qualitative Instrument Error Code Comparison Table
Comparison of error code output by U-WAM and Error code displayed on qualitative instrument is as follows.
* Error codes may be added or changed without prior notice. Ensure that these changes can be handled on the system side.

<When using UC-3500, UC-1000>


Qualitative
U-WAM Error description
device
0000 0000 No error
1100 1100 Mechanical trouble
2200 2200 Sampling error
AA00 9001 Nozzle clogging
BB00 9002 Test paper tip detection error
EE00 9003 Sampling error request did not come.
4020 4020 Foreign object on internal standard
5010 5010 Test paper is not in proper position.
5020 5020 There is no test paper in the test paper holder.
5030 5030 Light quantity insufficiency (Less in base parts)
5040 5040 The tip of test paper cannot be detected.
6010 6010 Pitch between the pads is too narrow.
6020 6020 The space of test paper tip is too wide.
6030 6030 Pitch between the pads is too wide.
6040 6040 Rear installation with test paper not in proper position
The type of the specified test paper is different. (Droplets in the
6050 6050
vicinity of the final pad)
7010 7010 Pad cannot be detected.
The type of the specified test paper is different. (Droplets in the
7020 7020
vicinity of the final pad)
7030 7030 Reversely installing test paper
7050 7050 Line mark cannot be detected.
8010 8010 Dropping failure (Supply shortage)
8030 8030 Dropping failure (Coloring unevenness in pad)
8040 8040 Trailing of viscous liquid

89
R315168
Qualitative
U-WAM Error description
device
0301 0301 R light quantity insufficiency
0302 0302 G light quantity insufficiency
0303 0303 B light quantity insufficiency
0304 0304 IR light quantity insufficiency
0305 0305 Color tone calculation error
0401 0401 SG light quantity insufficiency
0402 0402 SG liquid amount insufficiency
0403 0403 SG calculation error
0501 0501 Blank light quantity insufficiency
0502 0502 Blank liquid amount insufficiency
00BB 9901 Barcode read error
00CC 9902 Order error
00DD 9903 Expired test paper is used.

<When using UC-1000>


Qualitative
U-WAM Error description
device
1100 1100 Analysis Timeout
4020 4020 Lighting is insufficient.
Strip is not recognized correctly.
Strip is set incorrectly.
5010 5010
The length of the strip is incorrect.
The end of the strip is not recognized correctly.
6040 6040 Strip is set in reverse.
7010 7010 Barcode on the strip is not recognized correctly.
7020 7020 Strip is not recognized correctly.
7030 7030 Strip is not recognized correctly.
7050 7050 Line mark is not detected.
8050 8050 Counterfeit error
9010 9010 QC Range Exceeded

90
R315168
B.1 Urine Chemistry (Profile: Chemistry)

<UC-3500, UC-1000>
Name for host Country/region Result value information of RAW data
(default) Result value Result value type Result value

North America
type (semi-quantitative) (qualitative)
Parameter

Korea
China

Other
Japan
Full name For
ID Data Data Data
destination
For China Units Units Units
s other than value*2 value*2 value*2
China
“Customary “Customary
units” units”
normal, 2.0,
mg/dL
4.0,
0.0 to
Urobilinogen C-URO URO URO ○ ○ ○ ○ ○ % 8.0, 12.0 “SI units” normal,1+,2
999.9*1 +,3+,4+
“SI units” μmol/L
normal, 34.0,
68.0,
135.0, 202.0
“Customary “Customary
Occult Blood units, SI units, SI
0.0 to units” units” -, +-, 1+,
C-BLD BLD BLD ○ ○ ○ ○ ○ 999.9*1
%
0.03, 0.06, 2+, 3+
(hemoglobin) mg/dL
0.15,
0.75
“Customary “Customary
Occult blood ○ units, SI units, SI
0.0 to -, +-, 1+,
C-BLD BLD BLD ○ ○ ○ ○ 999.9*1
% units” units”
2+, 3+
(red blood ※4 10, 20, 50,
c/µl
cells) 250
“Customary “Customary
units” units”
0.0 to
Bilirubin C-BIL BIL BIL ○ ○ ○ ○ ○ 999.9*1
% 0.5, 1.0, 2.0 mg/dL -, 1+, 2+, 3+
“SI units” “SI units”
8.6, 17.0, 34.0 μmol/L
“Customary “Customary
units” units”
0.0 to 10, 30, 80 mg/dL
Ketone body C-KET KET KET ○ ○ ○ ○ ○ % -, 1+, 2+, 3+
999.9*1 “SI units” “SI units”
0.93, 2.8, 7.4 mmol/L
“Customary “Customary
units” units”
50, 100, 250,
mg/dL
0.0 to 500, -, +-, 1+,
Glucose C-GLU GLU GLU ○ ○ ○ ○ ○ 999.9*1
% 2000 “SI units” 2+, 3+, 4+
“SI units” mmol/L
2.8, 5.6,
14, 28, 111
“Customary “Customary
units” units”
15, 30, 100,
0.0 to mg/dL -, +-, 1+,
Protein C-PRO PRO PRO ○ ○ ○ ○ ○ 999.9*1
% 300, 1000
“SI units” “SI units” 2+, 3+, 4+
0.15, 0.3, g/L
1.0, 3.0, 10
0.0 to
pH C-PH PH PH ○ ○ ○ ○ ○ 999.9*1
% 5.0 to 9.0
0.0 to
Nitrite C-NIT NIT NIT ○ ○ ○ ○ ○ 999.9*1
% -, +
“Customary
0.0 to units, SI
Leukocyte C-LEU LEU LEU ○ ○ ○ ○ ○ % 25, 75, 500 -, 1+, 2+, 3+
999.9*1 units”
c/µl
“Customary “Customary
units” units”
10, 50, 100,
0.0 to mg/dL
Creatinine C-CRE CRE CRE ○ ○ ○ ○ ○ 999.9*1
% 200, 300
“SI units” “SI units”
0.1, 0.5, 1.0, g/L
2.0, 3.0
B.1 Urine Chemistry (Profile: Chemistry)

Name for host Country/region Result value information of RAW data


(default) Result value Result value type Result value

North America
type (semi-quantitative) (qualitative)
Parameter

China
Other
Other
Japan
Full name For
ID Data Data Data
destination
For China Units Units Units
s other than value*2 value*2 value*2
China
“Customary “Customary
units” units”
10, 30, 80,
mg/dL
0.0 to 150, over
Albumin C-ALB ALB ALB ○ ○ ○ ○ ○ 999.9*1
%
“SI units” “SI units”
0.01, 0.03,
g/L
0.08,
0.15, over
“Customary “Customary
Ratio of units, SI units, SI Dilute,
protein and C-P/C P/C P/C ○ ○ ○ ○ ○ units” units” normal, 1+,
creatinine 0.15, 0.30, 2+
g/gCr
>= 0.50
“Customary “Customary
Dilute,
Ratio of units, SI units, SI
normal,
units” units”
albumin and C-A/C A/C A/C ○ ○ ○ ○ ○ 30, 80, 150, 1+, >=1+,
creatinine mg/gCr
>=80 2+
>=150, >=300
Specific
1.000 to
gravity C-S.G.(Ref) S.G.(Ref) S.G.(Ref) ○ ○ ○ ○ ○
1.050
(Ref) *5
Specific
0.0 to 1.000 to
gravity C-s.g. s.g. s.g. ○ ○ ○ ○ ○ 999.9*1
%
1.030
(test sheet) *5
OTHER
00
L YELLOW
01
STRAW
02
Urine color C-COLOR COLOR COLOR ○ ○ ○ ○ ○ YELLOW
03
AMBER
04
RED 05
DK
BROWN
06
“ABCD”
*1
“A”: 0 to
4
C-
Urine color ColorRAN ColorRAN “B”: 0 to
ColorRAN ○ ○ ○ ○ ○
rank K K 4
K “C”: 0 to
4
“D”: 0 to
2
B.1 Urine Chemistry (Profile: Chemistry)

Name for host


Country/region Result value information of RAW data
transmission
Result value Result value
(default) Result value type

North America
Parameter type type
Full name (reflectance) (semi-quantitative) (qualitative)

China
Other
Other
Japan
ID
For
destination Data Data Data
For China Units Units Units
s other than value*2 value*2 value*2
China

Cloudiness C-CLOUD CLOUD CLOUD ○ ○ ○ ○ ○ -, 1+, 2+

C-Error 0000 to
Error code Error Code Error Code ○ ○ ○ ○ ○
Code 9903*3
<Notes>
*1: For North America, reflectance and urine color rank codes are not output.
*2: When an analysis error occurs on the urine chemistry analyzer, the result value (refer to ASTM field 9.4) of a target parameter may
become blank and be sent to the host computer. The qualitative value may be output when the semi-quantitative value result is blank
due to the U-WAM setting.
*3: Error codes output by U-WAM differ from error codes output by qualitative device. Refer to “Appendix K. Qualitative Instrument
Error Code Comparison Table” for the correspondence.
*4: By default, Occult blood (red blood cells) is not output in North America.
* Depending on a connected urine chemistry analyzer, available parameters and result value types may vary.
* For urine chemistry, result value information to be set in “RAW” or “MAINFORMAT” of the result format (refer to ASTM field 9.4)
differs depending on the setting of U-WAM.
Result value types applicable to result format “RAW”: “Qualitative” or “Semi-quantitative (customary units)”
Result value types applicable to result format “MAINFORMAT”: “Qualitative”, “Semi-quantitative (customary units)”, “Semi-
quantitative (SI units)”, or “Reflectance”
* According to orders, U-WAM determines a test paper and sends an order to a connected urine chemistry analyzer.

* Although the occult blood (BLD) is handled as a single parameter, the urine chemistry analyzer automatically detects hemoglobin
and red blood cells and outputs the result values. To separately store each result value on the system, refer to Units (ASTM field 9.5).
(Different units are used for hemoglobin and red blood cells.)
B.2 Urine Sediment (Profile: UF)

<UF-3000/3000x Reportable Parameters>


Name for Country/region Result value information of RAW data

America
host Parameter Result value type Result value type Result value type

Taiwan

Korea
China
North

Other
Japan
Full name
transmission ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0.0 to
Red blood cells RBC RBC ○ ○ ○ ○ ○ ○ /μL
99999.9
0.0 to
White blood cells WBC WBC ○ ○ ○ ○ ○ ○ /μL
99999.9
0.0 to
Epithelial cells EC EC ○ ○ ○ ○ ○ ○ /μL
99999.9
0.00 to
Casts CAST CAST ○ ○ ○ ○ ○ ○ /μL
9999.99
0.0 to
Bacteria BACT BACT ○ ○ ○ ○ ○ ○ /μL
9999999.9

<UF-3000/3000x Research Parameters>


Name for Country/region Result value information of RAW data

America
host Parameter Result value type Result value type Result value type

Taiwan

Korea
China

Other
North
Japan
Full name
transmission ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
Red blood
○ ○ ○ ○ ○
cell size ~RBC-P70Fsc *4 0.0 to 999.9 ch
indicator *5 *5 *5 *5 *5

Red blood ○ ○ ○ ○ ○
cell ~RBC-Fsc-
*4 0.0 to 999.9 ch
multiplicity DW *5 *5 *5 *5 *5
indicator
Red blood cells

Large red ○ ○ ○ ○ ○ 0.0 to


~Large RBC *4 *5 *5 *5 *5 *5
/μL
blood cell 99999.9
Small red ○ ○ ○ ○ ○ 0.0 to
~Small RBC *4 *5 *5 *5 *5 *5
/μL
blood cell 99999.9
Non- ○ ○ ○ ○ 0.0 to
hemolyzed red ~NL RBC *4 ○*5 ○*5 99999.9
/μL
*5 *5 *5 *5
blood cells

Hemolyzed red ○ ○ ○ ○ 0.0 to


~Lysed RBC *4 ○*5 ○*5 99999.9
/uL
blood cells *5 *5 *5 *5
Epithelial

Small circular ○ ○ ○ 0.0 to


cells

~SRC *4 ○*5 ○*5 99999.9


/μL
epithelial *5 *5 *5

Pathological ○ ○ ○ ○
Casts

0.00 to
~Path.CAST *4 ○*5 ○*5 9999.99
/μL
casts *5 *5 *5 *5

○ ○ ○ ○ 0.0 to
Crystal ~X’TAL *4 *5 *5 *5 *5 ○*5 ○*5 /uL
99999.9
○ ○ ○ ○ 0.0 to
Yeast-like cell ~YLC *4 *5 *5 *5 *5 ○*5 ○*5 99999.9
/uL

○ ○ ○ ○ 0.0 to
Sperm ~SPERM *4 *5 *5 *5 *5 ○*5 ○*5 99999.9
/uL

○ ○ ○ ○ 0.00 to
Mucus ~MUCUS *4 *5 *5 *5 *5 ○*5 ○*5 9999.99
/uL

○ ○ ○ ○
Urine conductivity ~Cond. *4 *5 *5 *5 *5 ○*5 ○*5 0.0 to 99.9 mS/cm

○ ○ ○ ○
SF Total Count ~SF_TC *4 *5 *5 *5 *5 ○*5 ○*5 0 to 999999 count

○ ○ ○ ○
CW Total Count ~CW_TC *4 *5 *5 *5 *5 ○*5 ○*5 0 to 999999 count
B.2 Urine Sediment (Profile: UF)

○ ○ ○ ○
CB Total Count ~CB_TC *4 *5 *5 *5 *5 ○*5 ○*5 0 to 999999 count

~SF_OTHER ○ ○ ○ ○ 0.0 to
SF Others *4 *5 *5 *5 *5 ○*5 ○*5 99999.9
/uL
S
~CW_OTHE ○ ○ ○ ○ 0.0 to
CW Others *4 *5 *5 *5 *5 ○*5 ○*5 99999.9
/uL
RS
○ ○ ○ ○ 0.0 to
DEBRIS ~DEBRIS *4 *5 *5 *5 *5 ○*5 ○*5 99999.9
/uL

<UF-3000/3000x Scatter/Histogram Parameters>


Name for Country/region Result value information of RAW data

America
host Parameter Result value type Result value type Result value type

Taiwan

Korea
China
North

Other
Japan
Full name
transmission ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
SF_DSS_PxSF_ SF_DSS_Px
SF_DSS_PxSF_FSC_P ○ ○ ○ ○ ○ ○ File path※7
FSC_P SF_FSC_P
HIST_SF_FSC_ HIST_SF_F
HIST_SF_FSC_P ○ ○ ○ ○ ○ ○ File path※7
P SC_P
CW_SSH_A
CW_SSH_AxC
CW_SSH_AxCW_FSC_W xCW_FSC_ ○ ○ ○ ○ ○ ○ File path※7
W_FSC_W
W
CW_FLL_A
CW_FLL_AxC
CW_FLL_AxCW_FSC_W xCW_FSC_ ○ ○ ○ ○ ○ ○ File path※7
W_FSC_W
W
SF_FLL_WxSF_ SF_FLL_Wx
SF_FLL_WxSF_FLL_A ○ ○ ○ ○ ○ ○ File path※7
FLL_A SF_FLL_A
CW_FLH_P
CW_FLH_PxC
CW_FLH_PxCW_FSC_P xCW_FSC_ ○ ○ ○ ○ ○ ○ File path※7
W_FSC_P
P
CB_FLH_PxCB CB_FLH_Px
CB_FLH_PxCB_FSC_P ○ ○ ○ ○ ○ ○ File path※7
_FSC_P CB_FSC_P
CW_SSH_P
CW_SSH_PxC
CW_SSH_PxCW_FLL_P xCW_FLL_ ○ ○ ○ ○ ○ ○ File path※7
W_FLL_P
P
HIST_CW_SSH HIST_CW_
HIST_CW_SSH_P ○ ○ ○ ○ ○ ○ File path※7
_P SSH_P

<UF-4000/5000 Reportable Parameters>


Name for Country/region Result value information of RAW data
America

host Parameter Result value type Result value type Result value type
Taiwan

Korea
China

Other
North
Japan

Full name
transmission ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0.0 to
Red blood cells RBC RBC ○ ○ ○ ○ ○ ○ /μL
99999.9
Non-
0.0 to
hemolyzed red NL RBC NL RBC ○ ○ /μL
99999.9
blood cells
Urinary red
xxxx.x –
blood cells URD URD ○ 0.0 to 100.0 % % -, +
yyyy.y
distribution
0.0 to
White blood cells WBC WBC ○ ○ ○ ○ ○ ○ /μL
99999.9
○ ○ -, +, 2+, 3+,
White blood WBC 0.0 to
WBC Clumps ○ ○ /μL 4+, 5+, 6+,
cell clumps Clumps *2 *2 99999.9
7+, 8+
0.0 to
Epithelial cells EC EC ○ ○ ○ ○ ○ ○ /μL
99999.9
Squamous 0.0 to
Squa.EC Squa.EC ○ ○ ○ ○ /μL
cells 99999.9
○ ○ -, +, 2+, 3+,
Non-squamous 0.0 to xxxx.x –
Non SEC Non SEC ○ ○ /μL /μL 4+, 5+, 6+,
epithelial cells *3 *2 99999.9 yyyy.y
7+, 8+
0.0 to
Urothelial cells Tran.EC Tran.EC ○ ○ /μL
99999.9
Tubular 0.0 to
RTEC RTEC ○ ○ /μL
epithelial cells 99999.9
0.00 to
Casts CAST CAST ○ ○ ○ ○ ○ ○ /μL
9999.99
○ ○ -, +, 2+, 3+,
0.00 to xxxx.x –
Hyaline casts Hy.CAST Hy.CAST ○ ○ /μL /μL 4+, 5+, 6+,
*3 *2 9999.99 yyyy.y
7+, 8+
B.2 Urine Sediment (Profile: UF)

○ ○ ○ -, +, 2+, 3+,
Pathological 0.00 to xxxx.x –
Path.CAST Path.CAST ○ ○ /μL /μL 4+, 5+, 6+,
casts *3 *1 *2 9999.99 yyyy.y
7+, 8+
0.0 to
Bacteria BACT BACT ○ ○ ○ ○ ○ /μL
9999999.9
○ ○ ○ -, +, 2+, 3+,
0.0 to xxxx.x –
Crystal X’TAL X’TAL ○ ○ /μL /μL 4+, 5+, 6+,
*3 *1 *2 99999.9 yyyy.y
7+, 8+
○ ○ ○ -, +, 2+, 3+,
0.0 to xxxx.x –
Yeast-like cell YLC YLC ○ ○ /μL /μL 4+, 5+, 6+,
*3 *1 *2 99999.9 yyyy.y
7+, 8+
○ ○ ○ -, +, 2+, 3+,
0.0 to xxxx.x –
Sperm SPERM SPERM ○ ○ /μL /μL 4+, 5+, 6+,
*3 *1 *2 99999.9 yyyy.y
7+, 8+
○ ○ ○ -, +, 2+, 3+,
0.00 to
Mucus MUCUS MUCUS ○ ○ /μL 4+, 5+, 6+,
*2 *1 *2 9999.99
7+, 8+

<UF-4000/5000 Research Parameters>


Name for Country/region Result value information of RAW data

America
host Parameter Result value type Result value type Result value type

Taiwan

Korea
China

Other
North
Japan

Full name
transmission ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
Red blood
○ ○ ○ ○ ○
cell size ~RBC-P70Fsc *4 0.0 to 999.9 ch
indicator *5 *5 *5 *5 *5

Red blood ○ ○ ○ ○ ○
cell ~RBC-Fsc-
*4 0.0 to 999.9 ch
multiplicity DW *5 *5 *5 *5 *5
Red blood cells

indicator
Large red ○ ○ ○ ○ ○ 0.0 to
~Large RBC *4 *5 *5 *5 *5 *5
/μL
blood cell 99999.9
Small red ○ ○ ○ ○ ○ 0.0 to
~Small RBC *4 *5 *5 *5 *5 *5
/μL
blood cell 99999.9
Non- ○ ○ ○ ○ 0.0 to
hemolyzed red ~NL RBC*6 *4 /μL
*5 *5 *5 *5 99999.9
blood cells
Hemolyzed red ~Lysed ○ ○ ○ ○ 0.0 to
*4 *5 *5 *5 *5 ○*5 ○*5 99999.9
/uL
blood cells RBC*6
○ ○ ○ ○
White

White blood ~WBC


blood

0.0 to
cells

*4 *5 *5 *5 *5
/μL
cell clumps Clumps*6 99999.9
Squamous ○ ○ 0.0 to
~Squa.EC*6 *4 *5 *5
/μL
epithelial cells 99999.9

Non-squamous ○ ○ ○ ○ 0.0 to
~Non SEC*6 *4 /μL
Epithelial cells

epithelial cells *5 *5 *5 *5 99999.9

○ ○ ○ ○ 0.0 to
Urothelial cells ~Tran.EC*6 *4 *5 *5 *5 *5
/μL
99999.9
Tubular ○ ○ ○ ○ 0.0 to
~RTEC*6 *4 *5 *5 *5 *5
/μL
epithelial cells 99999.9
Small circular ○ ○ 0.0 to
~SRC*6 *4 *5 *5 ○*5 ○*5 99999.9
/μL
epithelial
○ ○ ○ ○ ○ ○ 0.0 to
Atypical cells ~Atyp.C*6 *4 *5 *5 *5 *5 *5 *5
/μL
99999.9
○ ○ ○ ○ 0.00 to
Hyaline casts ~Hy.CAST*6 *4 *5 *5 *5 *5
/μL
9999.99
Casts

Pathological ~Path.CAST* ○ ○ ○ ○ 0.00 to


*4 *5 *5 *5 *5
/μL
casts 6 9999.99
B.2 Urine Sediment (Profile: UF)

○ ○ ○ ○ 0.0 to
Crystal ~X’TAL*6 *4 *5 *5 *5 *5
/uL
99999.9
○ ○ ○ ○ 0.0 to
Yeast-like cell ~YLC*6 *4 *5 *5 *5 *5 99999.9
/uL

○ ○ ○ ○ 0.0 to
Sperm ~SPERM*6 *4 *5 *5 *5 *5 99999.9
/uL

○ ○ ○ ○ 0.00 to
Mucus ~MUCUS*6 *4 *5 *5 *5 *5 9999.99
/uL

○ ○ ○ ○
Urine conductivity ~Cond.*6 *4 *5 *5 *5 *5 ○*5 ○*5 0.0 to 99.9 mS/cm

○ ○ ○ ○ mOsm/
Osmotic pressure ~Osmo.*6 *4 *5 *5 *5 *5 ○*5 ○*5 0 to 99999
kg
○ ○ ○ ○
SF Total Count ~SF_TC*6 *4 *5 *5 *5 *5 ○*5 ○*5 0 to 999999 count

○ ○ ○ ○
CW Total Count ~CW_TC*6 *4 *5 *5 *5 *5 ○*5 ○*5 0 to 999999 count

○ ○ ○ ○
CB Total Count ~CB_TC*6 *4 *5 *5 *5 *5 ○*5 ○*5 0 to 999999 count

~SF_OTHER ○ ○ ○ ○ 0.0 to
SF Others *4 *5 *5 *5 *5 ○*5 ○*5 99999.9
/uL
S*6
~CW_OTHE ○ ○ ○ ○ 0.0 to
CW Others *4 *5 *5 *5 *5 ○*5 ○*5 99999.9
/uL
RS*6
○ ○ ○ ○ 0.0 to
DEBRIS ~DEBRIS*6 *4 *5 *5 *5 *5 ○*5 ○*5 99999.9
/uL

<UF-4000/5000 Scatter/Histogram Parameters>


Name for Country/region Result value information of RAW data
America

host Parameter Result value type Result value type Result value type
Taiwan

Korea
China
North

Other
Japan

Full name
transmission ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
SF_DSS_PxSF_ SF_DSS_Px
SF_DSS_PxSF_FSC_P ○ ○ ○ ○ ○ ○ File path※7
FSC_P SF_FSC_P
HIST_SF_FSC_ HIST_SF_F
HIST_SF_FSC_P ○ ○ ○ ○ ○ ○ File path※7
P SC_P
CW_SSH_A
CW_SSH_AxC
CW_SSH_AxCW_FSC_W xCW_FSC_ ○ ○ ○ ○ ○ ○ File path※7
W_FSC_W
W
CW_FLL_A
CW_FLL_AxC
CW_FLL_AxCW_FSC_W xCW_FSC_ ○ ○ ○ ○ ○ ○ File path※7
W_FSC_W
W
SF_FLL_WxSF_ SF_FLL_Wx
SF_FLL_WxSF_FLL_A ○ ○ ○ ○ ○ ○ File path※7
FLL_A SF_FLL_A
CW_FLH_P
CW_FLH_PxC
CW_FLH_PxCW_FSC_P xCW_FSC_ ○ ○ ○ ○ ○ ○ File path※7
W_FSC_P
P
CB_FLH_PxCB CB_FLH_Px
CB_FLH_PxCB_FSC_P ○ ○ ○ ○ ○ ○ File path※7
_FSC_P CB_FSC_P
CW_SSH_P
CW_SSH_PxC
CW_SSH_PxCW_FLL_P xCW_FLL_ ○ ○ ○ ○ ○ ○ File path※7
W_FLL_P
P
HIST_CW_SSH HIST_CW_
HIST_CW_SSH_P ○ ○ ○ ○ ○ ○ File path※7
_P SSH_P

<Notes>
*1: Only a result abnormal flag is output. (The result value is not output.)
*2: The result type of RAW data is Qualitative.
*3: The result type of RAW data is Semi-quantitative.
*4: Research parameter orders cannot be registered to U-WAM from the host computer.
*5: Research parameters may not be output depending on the setting of U-WAM.
*6: Name for host transmission (default) is not ~(chilled) for the Chinese destination.
*7: The “(date folder)”/“(scatter image file name)” in the shared folder is set as the scatter image file path.

* The result value type of RAW data is Quantitative unless otherwise specified.
* For urine sediment, when the result type of RAW data is Qualitative, Main Format of the result format can be changed based on the result value
information.
Units that can be used in the result format vary by parameters. (For the available units, refer to “Appendix H. Units”.)

* When an analysis error occurs on the urine sediment analyzer, “----” may be set in the result value (refer to ASTM field 9.4) of a target parameter and
the result value is sent to the host computer.
* If an out of range error occurs in a urine quantitative analyzer, the parameter concerned may be transmitted with “++++” as the result value (see
ASTM Field 9.4) in some cases.
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
RBCs M-RBCs M-RBCs ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Lysed RBC M-NL RBC M-NL RBC ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0-10 -,
10-20 +,
20-30
30-40
40-50
URD M-URD M-URD ○ 0 to 100*1 %
50-60
60-70
70-80
80-90
90-100
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Isomorphic M-Iso
M-Iso RBCs ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
RBC RBCs
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
WBCs M-WBCs M-WBCs ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
WBC M-WBC
M-WBC Clumps ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
clumps Clumps
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Epithelial
M-EC M-EC ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
cells
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
Squamous 0 to 5-9/HPF,
epithelial M-Squa.EC M-Squa.EC ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
cells 9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type

America
Result value type

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“HPF”
<1/HPF,
Transitional 1-4/HPF,
0 to 5-9/HPF,
(Urothelial)
M-Tran. EC M-Tran. EC ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
epithelial
9.99*1 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
Rental 1-4/HPF,
0 to 5-9/HPF,
tubular
M-RTEC M-RTEC ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
epithelial
9.99*1 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
Columnar M- 0 to 5-9/HPF,
epithelial M-Columnar EC Columnar ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
cells EC 9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Oval fat
M-OFB M-OFB ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
bodies
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Atypical
M-Atyp. C M-Atyp. C ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
cells
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Hyaline M-Hy.
M-Hy. Casts ○ ○ ○ ○ ○ 999999999 /μl
casts Casts “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type

America
Result value type

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Epithelial M-Epith.
M-Epith. casts ○ ○ ○ ○ ○ 999999999 /μl
casts casts “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Granular M-Gra.
M-Gra. Casts ○ ○ ○ ○ ○ 999999999 /μl
casts Casts “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
M-WAXy
Waxy casts M-WAXY Casts ○ ○ ○ ○ ○ 999999999 /μl
Casts “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
M-FAT
Fatty casts M-FAT Casts ○ ○ ○ ○ ○ 999999999 /μl
Casts “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
M-RBC
RBC casts M-RBC Casts ○ ○ ○ ○ ○ 999999999 /μl
Casts “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
M-WBC
WBC casts M-WBC Casts ○ ○ ○ ○ ○ 999999999 /μl
Casts “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Mucus M-Mucus M-Mucus ○ ○ ○ ○ ○ 999999999 /μl
9.99*1 “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
-,
0 to +-,
Bacteria M-Bacteria M-Bacteria ○ ○ ○ ○ ○ 999999999 /μl 1+,
9.99*1 2+,
3+,
-,
0 to +-,
Bacteria-
M-COCCI M-COCCI ○ ○ ○ ○ ○ 999999999 /μl 1+,
Cocci
9.99*1 2+,
3+,
-,
0 to +-,
Bacteria-
M-RODS M-RODS ○ ○ ○ ○ ○ 999999999 /μl 1+,
Rods
9.99*1 2+,
3+,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
-,
0 to +-,
Fungi M-Fungi M-Fungi ○ ○ ○ ○ ○ 999999999 /μl 1+,
9.99*1 2+,
3+,
-,
0 to +-,
Yeast M-Yeast M-Yeast ○ ○ ○ ○ ○ 999999999 /μl 1+,
9.99*1 2+,
3+,
-,
M- 0 to +-,
Trichomona
M-Trichomonas Trichomona ○ ○ ○ ○ ○ 999999999 /μl 1+,
s
s 9.99*1 2+,
3+,
-,
0 to +-,
Urate M-Urate M-Urate ○ ○ ○ ○ ○ 999999999 /μl 1+,
9.99*1 2+,
3+,
-,
0 to +-,
M-
Phosphate M-Phosphate ○ ○ ○ ○ ○ 999999999 /μl 1+,
Phosphate
9.99*1 2+,
3+,
-,
Calcium 0 to +-,
M-CaOxm X ’ M-CaOxm
oxalate ○ ○ ○ ○ ○ 999999999 /μl 1+,
TAL X’TAL
crystals 9.99*1 2+,
3+,
-,
0 to +-,
Uric acid M-UA X ’
M-UA X’TAL ○ ○ ○ ○ ○ 999999999 /μl 1+,
crystals TAL
9.99*1 2+,
3+,
-,
Calcium 0 to +-,
M-CaPh X’
phosphate M-CaPh X’TAL ○ ○ ○ ○ ○ 999999999 /μl 1+,
TAL
crystals 9.99*1 2+,
3+,

Ammonium -,
M- 0 to +-,
magnesium M-Ammoni.
Ammoni. ○ ○ ○ ○ ○ 999999999 /μl 1+,
phosphate MAG. 9.99*1
MAG. 2+,
crystals
3+,
-,
Ammonium M- 0 to +-,
M-Ammoni.
biurate Ammoni. ○ ○ ○ ○ ○ 999999999 /μl 1+,
Biu.
crystals Biu. 9.99*1 2+,
3+,
-,
Calcium 0 to +-,
M-Calc.
carbonate M-Calc. carbon. ○ ○ ○ ○ ○ 999999999 /μl 1+,
carbon.
crystals 9.99*1 2+,
3+,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
-,
0 to +-,
Bilirubin
M-Bilirubin M-Bilirubin ○ ○ ○ ○ ○ 999999999 /μl 1+,
crystals
9.99*1 2+,
3+,
-,
0 to +-,
Cystine
M-Cystine M-Cystine ○ ○ ○ ○ ○ 999999999 /μl 1+,
crystals
9.99*1 2+,
3+,
0 to
Spermatozo -,
M-Sperma M-Sperma ○ ○ ○ ○ ○ 999999999 /μl
a
9.99*1 +,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
RBC M-RBC
M-RBC Clumps ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
clumps Clumps
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Dysmorphic M-Dys
M-Dys RBC ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
RBC RBC
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
M- 0 to 5-9/HPF,
Acanthocyt
M-Acanthocytes Acanthocyt ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
es
es 9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
WBC- 0 to 5-9/HPF,
Mononucle M-MN M-MN ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
ar 9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
WBC- 0 to 5-9/HPF,
Polymorpho M-PMN M-PMN ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
nuclear 9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Neutrophils M-NEUT M-NEUT ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Lymphocyt
M-LYMPH M-LYMPH ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
es
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Eosinophils M-EO M-EO ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Monocytes M-MONO M-MONO ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
M- 0 to 5-9/HPF,
Macrophag
M-Macrophages Macrophag ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
es
es 9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
Endometrial 0 to 5-9/HPF,
M-
stromal M-Endometrial ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
Endometrial
cells 9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Mesothelial M-
M-Mesothelial ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
cells Mesothelial
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
Superficial 1-4/HPF,
0 to 5-9/HPF,
Squamous M-s-Squa.
M-s-Squa. EC ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
epithelial EC
9.99*1 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
Intermediat 1-4/HPF,
e/Deep 0 to 5-9/HPF,
M-i/d-Squa.
Squamous M-i/d-Squa. EC ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
EC
epithelial 9.99*1 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
Non- 1-4/HPF,
0 to 5-9/HPF,
Squamous M-Non-Squam. M-Non-
○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
epithelial EC Squam. EC
9.99*1 20-29/HPF,
Cells 30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
Superficial 1-4/HPF,
Transitional 0 to 5-9/HPF,
M-s-Tran.
(Urothelial) M-s-Tran. EC ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
EC
epithelial 9.99*1 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
Intermediat <1/HPF,
e/Deep 1-4/HPF,
0 to 5-9/HPF,
Transitional M-i/d-Tran.
M-i/d-Tran. EC ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
(Urothelial) EC
9.99*1 20-29/HPF,
epithelial 30-49/HPF,
cells 50-99/HPF,
100-/HPF,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Epithelial M-EC
M-EC clumps ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
cells clumps clumps
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
Intracytopla 1-4/HPF,
smic 0 to 5-9/HPF,
inclusion- M-IB M-IB ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
bearing 9.99*1 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
Intranuclear 1-4/HPF,
0 to 5-9/HPF,
inclusion M-
M-Intracellular ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
bearing Intranculear
9.99*1 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
Human 1-4/HPF,
papilloma 0 to 5-9/HPF,
M-H.
virus- M-H. papilloma ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
papilloma
infected 9.99*1 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
Human 1-4/HPF,
polyoma 0 to 5-9/HPF,
M-H.
virus- M-H. polyoma ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
polyoma
infected 9.99*1 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
M-
Carcinoma M-Carcinoma ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
Carcinoma
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Malignant
M-ML M-ML ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
lymphoma
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
M-
Leukemia M-Leukemia ○ ○ ○ ○ ○ 999999999 /μl 10-19/HPF,
Leukemia
9.99*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Casts M-Casts M-Casts ○ ○ ○ ○ ○ 999999999 /μl
9.99*1 “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
Non- 0 to 10000-/WF,
M-N-hyal.
hyaline M-N-hyal. Casts ○ ○ ○ ○ ○ 999999999 /μl
Casts “LPF”
casts 9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
Vacuolar- 0 to 10000-/WF,
denatured M-VD Cast M-VD Cast ○ ○ ○ ○ ○ 999999999 /μl
casts 9.99*1 “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Salt/crystal M-
M-Salt/Crystal ○ ○ ○ ○ ○ 999999999 /μl
casts Salt/Crystal “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Macrophag M-Mphi
M-Mphi Cast ○ ○ ○ ○ ○ 999999999 /μl
e casts Cast “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Hemosideri M-Hemo
M-Hemo Cast ○ ○ ○ ○ ○ 999999999 /μl
n casts Cast “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Myoglobin M-Myrogl
M-Myrogl Cast ○ ○ ○ ○ ○ 999999999 /μl
casts Cast “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
Bence 1000-/WF, 4+,
0 to 10000-/WF,
Jones
M-B-J Cast M-B-J Cast ○ ○ ○ ○ ○ 999999999 /μl
protein “LPF”
9.99*1
casts 0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
M-Fibrin
Fibrin casts M-Fibrin Casts ○ ○ ○ ○ ○ 999999999 /μl
Casts “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
M-Broad
Broad casts M-Broad Casts ○ ○ ○ ○ ○ 999999999 /μl
Casts “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
Bacteria 1000-/WF, 4+,
0 to 10000-/WF,
and yeast- M-Bact
M-Bact Casts ○ ○ ○ ○ ○ 999999999 /μl
containing Casts “LPF”
9.99*1
casts 0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Bilirubin
M-BIL Cast M-BIL Cast ○ ○ ○ ○ ○ 999999999 /μl
casts “LPF”
9.99*1
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
-,
Gram M- 0 to +-,
M-Gram.Pos
positive Gram.Pos ○ ○ ○ ○ ○ 999999999 /μl 1+,
Bact
bacteria Bact 9.99*1 2+,
3+,
-,
Gram M- 0 to +-,
M-Gram.Neg
negative Gram.Neg ○ ○ ○ ○ ○ 999999999 /μl 1+,
Bact
bacteria Bact 9.99*1 2+,
3+,
-,
0 to +-,
Deformed M-Deform
M-Deform Bact ○ ○ ○ ○ ○ 999999999 /μl 1+,
bacteria Bact
9.99*1 2+,
3+,
-,
0 to +-,
Filamentous M-
M-Filamentous ○ ○ ○ ○ ○ 999999999 /μl 1+,
fungus Filamentous
9.99*1 2+,
3+,
-,
0 to +-,
Parasites M-Parasites M-Parasites ○ ○ ○ ○ ○ 999999999 /μl 1+,
9.99*1 2+,
3+,
-,
0 to +-,
Protozoa M-Protozoa M-Protozoa ○ ○ ○ ○ ○ 999999999 /μl 1+,
9.99*1 2+,
3+,
-,
0 to +-,
M-
Helminths M-Helminths ○ ○ ○ ○ ○ 999999999 /μl 1+,
Helminths
9.99*1 2+,
3+,
-,
0 to +-,
Amorphous
M-Amorph. M-Amorph. ○ ○ ○ ○ ○ 999999999 /μl 1+,
salts
9.99*1 2+,
3+,
-,
0 to +-,
Crystals M-Crystals M-Crystals ○ ○ ○ ○ ○ 999999999 /μl 1+,
9.99*1 2+,
3+,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Result value type Result value type Result value type

North America
transmission
Parameter (quantitative) (semi-quantitative) (qualitative)

Korea
China

Other
Japan
Full name
ID
(default) Data value Units Data value Units Data value Units

-,
0 to +-,
Cholesterol M-
M-Cholesterol ○ ○ ○ ○ ○ 999999999 /μl 1+,
crystals Colesterol
9.99*1 2+,
3+,
2,8- -,
0 to +-,
dihydroxya M-2-8-
M-2-8-dihydro. ○ ○ ○ ○ ○ 999999999 /μl 1+,
denine dihydro.
9.99*1 2+,
crystals 3+,
-,
0 to +-,
Tyrosine
M-Tyrosine M-Tyrosine ○ ○ ○ ○ ○ 999999999 /μl 1+,
crystals
9.99*1 2+,
3+,
-,
0 to +-,
Leucine
M-Leucine M-Leucine ○ ○ ○ ○ ○ 999999999 /μl 1+,
crystals
9.99*1 2+,
3+,
-,
Drug 0 to +-,
substance M-Drug M-Drug ○ ○ ○ ○ ○ 999999999 /μl 1+,
crystals 9.99*1 2+,
3+,
M- 0 to
Hemosideri -,
M-Hemosiderin Hemosideri ○ ○ ○ ○ ○ 999999999 /μl
n granules
n 9.99*1 +,
Semen
0 to
components M-Amyloid -,
M-Amyloid body ○ ○ ○ ○ ○ 999999999 /μl
(Amyloid body
9.99*1
body) +,
0 to
M-fat -,
Fat droplets M-fat droplets ○ ○ ○ ○ ○ 999999999 /μl
droplets
9.99*1 +,
Impure 0 to
-,
ingredient M-Artifacts M-Artifacts ○ ○ ○ ○ ○ 999999999 /μl
(Artifacts) 9.99*1 +,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type

America
Result value type

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)

(default) Data value Units Data value Units Data value Units
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Setting 1 M-User1 M-User1 ○ ○ ○ ○ ○ 999999999 /μl
9.99*1 “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Setting 2 M-User2 M-User2 ○ ○ ○ ○ ○ 999999999 /μl
9.99*1 “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Setting 3 M-User3 M-User3 ○ ○ ○ ○ ○ 999999999 /μl
9.99*1 “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Setting 4 M-User4 M-User4 ○ ○ ○ ○ ○ 999999999 /μl
9.99*1 “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Setting 5 M-User5 M-User5 ○ ○ ○ ○ ○ 999999999 /μl
9.99*1 “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.3 Visual examination (Profile: Visual)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type

America
Result value type

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)

(default) Data value Units Data value Units Data value Units
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Setting 6 M-User6 M-User6 ○ ○ ○ ○ ○ 999999999 /μl
9.99*1 “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Setting 7 M-User7 M-User7 ○ ○ ○ ○ ○ 999999999 /μl
9.99*1 “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
“WF” -,
0/WF, 1+,
1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
0 to 10000-/WF,
Setting 8 M-User8 M-User8 ○ ○ ○ ○ ○ 999999999 /μl
9.99*1 “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,

<Notes>
*1: According to your laboratory operational procedures, result values (refer to ASTM field 9.4) may be changed and output for both of
RAW data and Main Format. It is output up to 12 significant digits and from zeroth decimal place to second decimal place.
* Request only necessary analysis parameters for your laboratory operational procedures.
* Even if a visual examination order is not received (or if an analysis parameter is not requested although the order is received), the order is
registered using U-WAM and the result is sent.
* Depending on the setting of U-WAM, measurement items with no result may not be output.
* When measurement items with no result input are output, "- - -" is set in the result value (see ASTM field 9.4.) And transmitted.
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Red blood
P-RBCs P-RBCs ○ ○ ○ ○ ○ /µl 10-19/HPF,
cells 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Lysed RBC P-NL RBC P-NL RBC ○ ○ ○ ○ ○ /µl 10-19/HPF,
20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to 100 0-10 -,
*1 10-20 +,
20-30
30-40
40-50
URD P-URD P-URD ○ %
50-60
60-70
70-80
80-90
90-100
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Isomorphic
P-Iso RBCs P-Iso RBCs ○ ○ ○ ○ ○ /µl 10-19/HPF,
RBC 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
White blood
P-WBCs P-WBCs ○ ○ ○ ○ ○ /µl 10-19/HPF,
cells 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
White blood P-WBC P-WBC
○ ○ ○ ○ ○ /µl 10-19/HPF,
cell clumps Clumps Clumps 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Epithelial
P-EC P-EC ○ ○ ○ ○ ○ /µl 10-19/HPF,
cells 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Squamous
P-Squa.EC P-Squa.EC ○ ○ ○ ○ ○ /µl 10-19/HPF,
cells 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “HPF”
9999999999.99 <1/HPF,
Transitional *1 1-4/HPF,
5-9/HPF,
(Urothelial)
P-Tran. EC P-Tran. EC ○ ○ ○ ○ ○ /µl 10-19/HPF,
epithelial 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
Rental *1 1-4/HPF,
5-9/HPF,
tubular
P-RTEC P-RTEC ○ ○ ○ ○ ○ /µl 10-19/HPF,
epithelial 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
Columnar 5-9/HPF,
P-Columnar
epithelial P-Columnar EC ○ ○ ○ ○ ○ /µl 10-19/HPF,
EC 20-29/HPF,
cells
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Oval fat
P-OFB P-OFB ○ ○ ○ ○ ○ /µl 10-19/HPF,
bodies 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Atypical
P-Atyp. C P-Atyp. C ○ ○ ○ ○ ○ /µl 10-19/HPF,
cells 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Hyaline
P-Hy. Casts P-Hy. Casts ○ ○ ○ ○ ○ /µl
casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Epithelial P-Epith.
P-Epith. casts ○ ○ ○ ○ ○ /µl
casts casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Granular P-Gra.
P-Gra. Casts ○ ○ ○ ○ ○ /µl
casts Casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
P-WAXy
Waxy casts P-WAXY Casts ○ ○ ○ ○ ○ /µl
Casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
P-FAT
Fatty casts P-FAT Casts ○ ○ ○ ○ ○ /µl
Casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
P-RBC
RBC casts P-RBC Casts ○ ○ ○ ○ ○ /µl
Casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
P-WBC
WBC casts P-WBC Casts ○ ○ ○ ○ ○ /µl
Casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Mucus P-Mucus P-Mucus ○ ○ ○ ○ ○ /µl
“LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to -,
9999999999.99 +-,
Bacteria P-Bacteria P-Bacteria ○ ○ ○ ○ ○ *1 /µl 1+,
2+,
3+,
0 to -,
9999999999.99 +-,
Bacteria-
P-COCCI P-COCCI ○ ○ ○ ○ ○ *1 /µl 1+,
Cocci 2+,
3+,
0 to -,
9999999999.99 +-,
Bacteria-
P-RODS P-RODS ○ ○ ○ ○ ○ *1 /µl 1+,
Rods 2+,
3+,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to -,
9999999999.99 +-,
Fungi P-Fungi P-Fungi ○ ○ ○ ○ ○ *1 /µl 1+,
2+,
3+,
0 to -,
9999999999.99 +-,
Yeast P-Yeast P-Yeast ○ ○ ○ ○ ○ *1 /µl 1+,
2+,
3+,
0 to -,
P- 9999999999.99 +-,
Trichomona
P-Trichomonas Trichomona ○ ○ ○ ○ ○ *1 /µl 1+,
s 2+,
s
3+,
0 to -,
9999999999.99 +-,
Urate P-Urate P-Urate ○ ○ ○ ○ ○ *1 /µl 1+,
2+,
3+,
0 to -,
9999999999.99 +-,
Phosphate P-Phosphate P-Phosphate ○ ○ ○ ○ ○ *1 /µl 1+,
2+,
3+,
0 to -,
Calcium 9999999999.99 +-,
P-CaOxm X ’ P-CaOxm
oxalate ○ ○ ○ ○ ○ *1 /µl 1+,
TAL X’TAL 2+,
crystals
3+,
0 to -,
9999999999.99 +-,
Uric acid P-UA X ’
P-UA X’TAL ○ ○ ○ ○ ○ *1 /µl 1+,
crystals TAL 2+,
3+,
0 to -,
Calcium 9999999999.99 +-,
P-CaPh X ’
phosphate P-CaPh X’TAL ○ ○ ○ ○ ○ *1 /µl 1+,
TAL 2+,
crystals
3+,

Ammonium 0 to -,

magnesium P-Ammoni. P-Ammoni.


○ ○ ○ ○ ○ 9999999999.99 /µl +-,
phosphate MAG. MAG. *1 1+,
crystals 2+,
3+,
0 to -,
Ammonium 9999999999.99 +-,
P-Ammoni. P-Ammoni.
biurate ○ ○ ○ ○ ○ *1 /µl 1+,
Biu. Biu. 2+,
crystals
3+,
0 to -,
Calcium 9999999999.99 +-,
P-Calc.
carbonate P-Calc. carbon. ○ ○ ○ ○ ○ *1 /µl 1+,
carbon. 2+,
crystals
3+,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to -,
9999999999.99 +-,
Bilirubin
P-Bilirubin P-Bilirubin ○ ○ ○ ○ ○ *1 /µl 1+,
crystals 2+,
3+,
0 to -,
9999999999.99 +-,
Cystine
P-Cystine P-Cystine ○ ○ ○ ○ ○ *1 /µl 1+,
crystals 2+,
3+,
0 to -,
Sperm P-Sperma P-Sperma ○ ○ ○ ○ ○ 9999999999.99 /µl +,
*1
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
RBC P-RBC
P-RBC Clumps ○ ○ ○ ○ ○ /µl 10-19/HPF,
clumps Clumps 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Dysmorphic
P-Dys RBC P-Dys RBC ○ ○ ○ ○ ○ /µl 10-19/HPF,
RBC 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
P- 5-9/HPF,
Acanthocyt
P-Acanthocytes Acanthocyt ○ ○ ○ ○ ○ /µl 10-19/HPF,
es 20-29/HPF,
es
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
WBC- 5-9/HPF,
Mononucle P-MN P-MN ○ ○ ○ ○ ○ /µl 10-19/HPF,
ar 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
WBC- 5-9/HPF,
Polymorpho P-PMN P-PMN ○ ○ ○ ○ ○ /µl 10-19/HPF,
nuclear 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Neutrophils P-NEUT P-NEUT ○ ○ ○ ○ ○ /µl 10-19/HPF,
20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Lymphocyt
P-LYMPH P-LYMPH ○ ○ ○ ○ ○ /µl 10-19/HPF,
es 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Eosinophils P-EO P-EO ○ ○ ○ ○ ○ /µl 10-19/HPF,
20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Monocytes P-MONO P-MONO ○ ○ ○ ○ ○ /µl 10-19/HPF,
20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
P- 5-9/HPF,
Macrophag
P-Macrophages Macrophag ○ ○ ○ ○ ○ /µl 10-19/HPF,
es 20-29/HPF,
es
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
Endometrial 5-9/HPF,
P-
stromal P-Endometrial ○ ○ ○ ○ ○ /µl 10-19/HPF,
Endometrial 20-29/HPF,
cells
30-49/HPF,
50-99/HPF,
100-/HPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Mesothelial P-
P-Mesothelial ○ ○ ○ ○ ○ /µl 10-19/HPF,
cells Mesothelial 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
Superficial *1 1-4/HPF,
5-9/HPF,
Squamous P-s-Squa.
P-s-Squa. EC ○ ○ ○ ○ ○ /µl 10-19/HPF,
epithelial EC 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
Intermediat *1 1-4/HPF,
e/Deep 5-9/HPF,
P-i/d-Squa.
Squamous P-i/d-Squa. EC ○ ○ ○ ○ ○ /µl 10-19/HPF,
EC 20-29/HPF,
epithelial
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
Non- *1 1-4/HPF,
5-9/HPF,
Squamous P-Non-Squam. P-Non-
○ ○ ○ ○ ○ /µl 10-19/HPF,
epithelial EC Squam. EC 20-29/HPF,
Cells 30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
Superficial *1 1-4/HPF,
Transitional 5-9/HPF,
P-s-Tran.
(Urothelial) P-s-Tran. EC ○ ○ ○ ○ ○ /µl 10-19/HPF,
EC 20-29/HPF,
epithelial
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
Intermediat 9999999999.99 <1/HPF,
e/Deep *1 1-4/HPF,
5-9/HPF,
Transitional P-i/d-Tran.
P-i/d-Tran. EC ○ ○ ○ ○ ○ /µl 10-19/HPF,
(Urothelial) EC 20-29/HPF,
epithelial 30-49/HPF,
cells 50-99/HPF,
100-/HPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Epithelial P-EC
P-EC clumps ○ ○ ○ ○ ○ /µl 10-19/HPF,
cells clumps clumps 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
Intracytopla *1 1-4/HPF,
smic 5-9/HPF,
inclusion- P-IB P-IB ○ ○ ○ ○ ○ /µl 10-19/HPF,
bearing 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
Intranuclear *1 1-4/HPF,
5-9/HPF,
inclusion P-
P-Intracellular ○ ○ ○ ○ ○ /µl 10-19/HPF,
bearing Intranculear 20-29/HPF,
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
Human *1 1-4/HPF,
papilloma 5-9/HPF,
P-H.
virus- P-H. papilloma ○ ○ ○ ○ ○ /µl 10-19/HPF,
papilloma 20-29/HPF,
infected
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
Human *1 1-4/HPF,
polyoma 5-9/HPF,
P-H.
virus- P-H. polyoma ○ ○ ○ ○ ○ /µl 10-19/HPF,
polyoma 20-29/HPF,
infected
cells 30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
P-
Carcinoma P-Carcinoma ○ ○ ○ ○ ○ /µl 10-19/HPF,
Carcinoma 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Malignant
P-ML P-ML ○ ○ ○ ○ ○ /µl 10-19/HPF,
lymphoma 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “HPF”
9999999999.99 <1/HPF,
*1 1-4/HPF,
5-9/HPF,
Leukemia P-Leukemia P-Leukemia ○ ○ ○ ○ ○ /µl 10-19/HPF,
20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Casts P-Casts P-Casts ○ ○ ○ ○ ○ /µl
“LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Pathological P-N-hyal.
P-N-hyal. Casts ○ ○ ○ ○ ○ /µl
casts Casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
Vacuolar- 10000-/WF,
denatured P-VD Cast P-VD Cast ○ ○ ○ ○ ○ /µl
casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Salt/crystal P-
P-Salt/Crystal ○ ○ ○ ○ ○ /µl
casts Salt/Crystal “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Macrophag P-Mphi
P-Mphi Cast ○ ○ ○ ○ ○ /µl
e casts Cast “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Hemosideri P-Hemo
P-Hemo Cast ○ ○ ○ ○ ○ /µl
n casts Cast “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Myoglobin P-Myrogl
P-Myrogl Cast ○ ○ ○ ○ ○ /µl
casts Cast “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
Bence 1000-/WF, 4+,
10000-/WF,
Jones
P-B-J Cast P-B-J Cast ○ ○ ○ ○ ○ /µl
protein “LPF”
casts 0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
P-Fibrin
Fibrin casts P-Fibrin Casts ○ ○ ○ ○ ○ /µl
Casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
P-Broad
Broad casts P-Broad Casts ○ ○ ○ ○ ○ /µl
Casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
Bacteria 1000-/WF, 4+,
10000-/WF,
and yeast- P-Bact
P-Bact Casts ○ ○ ○ ○ ○ /µl
containing Casts “LPF”
casts 0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Bilirubin
P-BIL Cast P-BIL Cast ○ ○ ○ ○ ○ /µl
casts “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to -,
Gram 9999999999.99 +-,
P-Gram.Pos P-Gram.Pos
positive ○ ○ ○ ○ ○ *1 /µl 1+,
Bact Bact 2+,
bacteria
3+,
0 to -,
Gram P- 9999999999.99 +-,
P-Gram.Neg
negative Gram.Neg ○ ○ ○ ○ ○ *1 /µl 1+,
Bact 2+,
bacteria Bact
3+,
0 to -,
9999999999.99 +-,
Deformed P-Deform
P-Deform Bact ○ ○ ○ ○ ○ *1 /µl 1+,
bacteria Bact 2+,
3+,
0 to -,
9999999999.99 +-,
Filamentous P-
P-Filamentous ○ ○ ○ ○ ○ *1 /µl 1+,
fungus Filamentous 2+,
3+,
0 to -,
9999999999.99 +-,
Parasites P-Parasites P-Parasites ○ ○ ○ ○ ○ *1 /µl 1+,
2+,
3+,
0 to -,
9999999999.99 +-,
Protozoa P-Protozoa P-Protozoa ○ ○ ○ ○ ○ *1 /µl 1+,
2+,
3+,
0 to -,
9999999999.99 +-,
P-
Helminths P-Helminths ○ ○ ○ ○ ○ *1 /µl 1+,
Helminths 2+,
3+,
0 to -,
9999999999.99 +-,
Amorphous
P-Amorph. P-Amorph. ○ ○ ○ ○ ○ *1 /µl 1+,
salts 2+,
3+,
0 to -,
9999999999.99 +-,
Crystal P-Crystals P-Crystals ○ ○ ○ ○ ○ *1 /µl 1+,
2+,
3+,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to -,
9999999999.99 +-,
Cholesterol
P-Cholesterol P-Colesterol ○ ○ ○ ○ ○ *1 /µl 1+,
crystals 2+,
3+,
2,8- 0 to -,
9999999999.99 +-,
dihydroxya P-2-8-
P-2-8-dihydro. ○ ○ ○ ○ ○ *1 /µl 1+,
denine dihydro. 2+,
crystals 3+,
0 to -,
9999999999.99 +-,
Tyrosine
P-Tyrosine P-Tyrosine ○ ○ ○ ○ ○ *1 /µl 1+,
crystals 2+,
3+,
0 to -,
9999999999.99 +-,
Leucine
P-Leucine P-Leucine ○ ○ ○ ○ ○ *1 /µl 1+,
crystals 2+,
3+,
0 to -,
Drug 9999999999.99 +-,
substance P-Drug P-Drug ○ ○ ○ ○ ○ *1 /µl 1+,
crystals 2+,
3+,
P- 0 to -,
Hemosideri
P-Hemosiderin Hemosideri ○ ○ ○ ○ ○ 9999999999.99 /µl +,
n granules
n *1

Semen
0 to -,
components P-Amyloid P-Amyloid
○ ○ ○ ○ ○ /µl
(Amyloid body body
9999999999.99 +,
body)
*1
0 to -,
P-fat
Fat droplets P-fat droplets ○ ○ ○ ○ ○ 9999999999.99 /µl +,
droplets *1

Impure 0 to -,
ingredient P-Artifacts P-Artifacts ○ ○ ○ ○ ○ /µl
9999999999.99 +,
(Artifacts)
*1
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Setting 1 P-User1 P-User1 ○ ○ ○ ○ ○ /µl
“LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Setting 2 P-User1 P-User1 ○ ○ ○ ○ ○ /µl
“LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Setting 3 P-User1 P-User1 ○ ○ ○ ○ ○ /µl
“LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Setting 4 P-User1 P-User1 ○ ○ ○ ○ ○ /µl
“LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Setting 5 P-User1 P-User1 ○ ○ ○ ○ ○ /µl
“LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.4 Particle Classification (Profile: Particle Classification)

Country/region Result value information of RAW data*1


Name for host
Parameter Result value type Result value type Result value type

America

Korea
China

Other
Japan
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Setting 6 P-User1 P-User1 ○ ○ ○ ○ ○ /µl
“LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Setting 7 P-User1 P-User1 ○ ○ ○ ○ ○ /µl
“LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
Setting 8 P-User1 P-User1 ○ ○ ○ ○ ○ /µl
“LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,

<Notes>
*1: It is output up to 12 significant digits and from zeroth decimal place to second decimal place.
* According to your laboratory operational procedures, result values (refer to ASTM field 9.4) may be changed and output for both of RAW
data and Main Format.
* Request only necessary analysis parameters for your laboratory operational procedures.
* Even if a particle classification order is not received (or if an analysis parameter is not requested although the order is received), the order
is registered using U-WAM and the result is sent.
* For particle classification, when the result type of RAW data is Qualitative, Main Format of the result format can be changed.Units that
can be used in the result format vary by parameters. (For the available units, refer to “Appendix H. Units”)
* Depending on the setting of U-WAM, measurement items with no result may not be output.
* When measurement items with no result input are output, "- - -" is set in the result value (see ASTM field 9.4.) And transmitted.
B.5 Body Fluid (Profile: BF)

<UF-3000/3000x Reportable Parameters>


Country/region Result value information of RAW data*1
Name for host
Parameter Result value type Result value type Result value type

America

Taiwan

Korea
China
Japan

Other
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
Red blood
RBC-BF RBC-BF ○ ○ ○ ○ 0.0 to 99999.9 /μL
cells
White blood
WBC-BF WBC-BF ○ ○ ○ ○ 0.0 to 99999.9 /μL
cells
Nucleated
TNC TNC ○ ○ ○ 0.0 to 99999.9 /μL
cell count

<UF-3000/3000x Research Parameters>


Country/region Result value information of RAW data*1
Name for host
Parameter Result value type Result value type Result value type
America

Taiwan

Korea
China
Japan

Other
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
Nucleated ○
~TNC *1 0.0 to 99999.9 /μL
cell count *2

SF Total ○ ○ ○ ○
~SF_TC-BF *1 0 to 999999 count
Count *2 *2 *2 *2

CW Total ○ ○ ○ ○
~CW_TC-BF *1 0 to 999999 count
Count *2 *2 *2 *2

CB Total ○ ○ ○ ○
~CB_TC-BF *1 0 to 999999 count
Count *2 *2 *2 *2

~SF_OTHERS- ○ ○ ○ ○
SF Others *1 0.0 to 99999.9 /uL
BF *2 *2 *2 *2

~CW_OTHERS- ○ ○ ○ ○
CW Others *1 0.0 to 99999.9 /uL
BF *2 *2 *2 *2

○ ○ ○ ○
DEBRIS ~DEBRIS-BF *1 0.0 to 99999.9 /uL
*2 *2 *2 *2

<UF-3000/3000x Scatter/Histogram Parameters>


Country/region Result value information of RAW data*1
Name for host
Parameter Result value type Result value type Result value type
America

Taiwan

Korea
China
Japan

Other
North

Full name transmission


ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
SF_DSS_PxS SF_DSS_PxSF_FSC SF_DSS_PxS
○ ○ ○ ○ File path※3
F_FSC_P-BF _P-BF F_FSC_P-BF
CW_SSH_Ax CW_SSH_Ax
CW_SSH_AxCW_F
CW_FSC_W- CW_FSC_W- ○ ○ ○ ○ File path※3
SC_W-BF
BF BF
CW_FLL_Ax CW_FLL_Ax
CW_FLL_AxCW_F
CW_FSC_W- CW_FSC_W- ○ ○ ○ ○ File path※3
SC_W-BF
BF BF
B.5 Body Fluid (Profile: BF)

<UF-4000/5000 Reportable Parameters>


Country/region Result value information of RAW data
Name for host
Parameter Result value type Result value type Result value type

America

Taiwan

Korea
China
Japan

Other
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
Red blood cells RBC-BF RBC-BF ○ ○ ○ ○ 0.0 to 99999.9 /μL

White blood cells WBC-BF WBC-BF ○ ○ ○ ○ 0.0 to 99999.9 /μL

Mononucleo
MN# MN# ○ ○ ○ ○ 0.0 to 99999.9 /μL
sis (count)

Mononucleo
sis MN% MN% ○ ○ ○ ○ 0.0 to 100.0 %
(percentage)

Polymorpho
nuclear
PMN# PMN# ○ ○ ○ ○ 0.0 to 99999.9 /μL
leukocytes
(count)

Polymorpho
nuclear
PMN% PMN% ○ ○ ○ ○ 0.0 to 100.0 %
leukocytes
(percentage)

Epithelial cells EC-BF EC-BF ○ ○ 0.0 to 99999.9 /μL

Nucleated cell
TNC TNC ○ ○ ○ 0.0 to 99999.9 /μL
count

Bacteria BACT-BF BACT-BF ○ ○ 0.0 to 99999.9 /μL


B.5 Body Fluid (Profile: BF)

<UF-4000/5000 Research Parameters>


Country/region Result value information of RAW data*1
Name for host
Parameter Result value type Result value type Result value type

America

Taiwan

Korea
China
Japan

Other
North
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
Epithelial ○ ○ /uL
~EC-BF *1 0.0 to 99999.9
cells *2 *2
Nucleated ○ /μL
~TNC *1 0.0 to 99999.9
cell count *2
○ ○ /uL
Bacteria ~BACT-BF *1 0.0 to 99999.9
*2 *2
SF Total ○ ○ ○ ○ count
~SF_TC-BF *1 0 to 999999
Count *2 *2 *2 *2
CW Total ○ ○ ○ ○ count
~CW_TC-BF *1 0 to 999999
Count *2 *2 *2 *2
CB Total ○ ○ ○ ○ count
~CB_TC-BF *1 0 to 999999
Count *2 *2 *2 *2
~SF_OTHERS- ○ ○ ○ ○ /uL
SF Others *1 0.0 to 99999.9
BF *2 *2 *2 *2
~CW_OTHERS- ○ ○ ○ ○ /uL
CW Others *1 0.0 to 99999.9
BF *2 *2 *2 *2
○ ○ ○ ○ /uL
DEBRIS ~DEBRIS-BF *1 0.0 to 99999.9
*2 *2 *2 *2

<UF-4000/5000 Scatter/Histogram Parameters>


Country/region Result value information of RAW data*1
Name for host
Parameter Result value type Result value type Result value type
America

Taiwan

Korea
China
Japan

Other
North

Full name transmission


ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
SF_DSS_PxS SF_DSS_PxSF_FSC SF_DSS_PxS
○ ○ ○ ○ File path※3
F_FSC_P-BF _P-BF F_FSC_P-BF
CW_SSH_Ax CW_SSH_Ax
CW_SSH_AxCW_F
CW_FSC_W- CW_FSC_W- ○ ○ ○ ○ File path※3
SC_W-BF
BF BF
CW_FLL_Ax CW_FLL_Ax
CW_FLL_AxCW_F
CW_FSC_W- CW_FSC_W- ○ ○ ○ ○ File path※3
SC_W-BF
BF BF
CW_SSH_Px CW_SSH_Px
CW_SSH_PxCW_F
CW_FLL_P- CW_FLL_P- ○ ○ ○ ○ File path※3
LL_P-BF
BF BF
CB_FLH_PxC CB_FLH_PxCB_FS CB_FLH_PxC
○ ○ ○ ○ File path※3
B_FSC_P-BF C_P-BF B_FSC_P-BF

<Notes>
*1: Research parameter orders cannot be registered to U-WAM from the host computer.
*2: Research parameters may not be output depending on the setting of U-WAM.
*3: The “(date folder)”/“(scatter image file name)” in the shared folder is set as the scatter image file path.

* For body fluid, when the result type of RAW data is Qualitative, Main Format of the result format can be changed.
Units that can be used in the result format vary by parameters. (For the available units, refer to “Appendix H. Units”.)
B.6 Body Fluid Visual Examination (Profile: Visual body fluid)

Country/region Result value information of RAW data*1


Name for host

America
Parameter Result value type Result value type Result value type

Korea
China
North

Other
Japan
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
M-RBCs-
RBCs M-RBCs-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
BF *1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
M-WBCs-
WBCs M-WBCs-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
BF *1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
WBC- 0 to 5-9/HPF,
M-WBC- M-WBC-
Mononucle ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
Mono-BF Mono-BF *1 20-29/HPF,
ar
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
WBC- M-WBC- 0 to 5-9/HPF,
M-WBC-
Polymorpho Polymorp- ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
Polymorp-BF 20-29/HPF,
nuclear BF *1
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
WBC M-WBC M-WBC
○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
Clumps Clumps-BF Clumps-BF *1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
Macrophag 1-4/HPF,
M- M- 0 to 5-9/HPF,
es
Macrophages- Macrophag ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
(Histiocytes *1 20-29/HPF,
BF es-BF
) 30-49/HPF,
50-99/HPF,
100-/HPF,
B.6 Body Fluid Visual Examination (Profile: Visual body fluid)

Country/region Result value information of RAW data*1


Name for host

America
Parameter Result value type Result value type Result value type

Korea
China
North

Other
Japan
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
EC M-EC-BF M-EC-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
M- 0 to 5-9/HPF,
Mesothelial M-Mesothelial-
Mesothelial ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
cells BF *1 20-29/HPF,
-BF
30-49/HPF,
50-99/HPF,
100-/HPF,

“HPF”

<1/HPF,
TNC(Total 0 to 1-4/HPF,
nucleated M-TNC-BF M-TNC-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 5-9/HPF,
cells) *1 10-19/HPF,
20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Atypical M-Atyp. C-
M-Atyp. C-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
cells BF *1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
-,
0 to +-,
M-Bacteria-
Bacteria M-Bacteria-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 1+,
BF *1 2+,
3+,
-,
0 to +-,
M-Yeast-
Yeast M-Yeast-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 1+,
BF *1 2+,
3+,
-,
M- 0 to +-,
Filamentous
M-Parasites-BF Parasites- ○ ○ ○ ○ ○ 9999999999.99 /μl 1+,
fungus *1 2+,
BF
3+,
B.6 Body Fluid Visual Examination (Profile: Visual body fluid)

Country/region Result value information of RAW data*1


Name for host

America
Parameter Result value type Result value type Result value type

Korea
China
North

Other
Japan
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
-,
0 to +-,
Amorphous M-AMO-
M-AMO-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 1+,
salts BF *1 2+,
3+,
-,
0 to +-,
M-UA X’TAL- M-UA X ’
Crystals ○ ○ ○ ○ ○ 9999999999.99 /μl 1+,
BF TAL-BF *1 2+,
3+,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
M-NEUT-
Neutrophils M-NEUT-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
BF *1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
M- 0 to 5-9/HPF,
Lymphocyt
M-LYMPH-BF LYMPH- ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
es *1 20-29/HPF,
BF
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
Eosinophils M-EO-BF M-EO-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
*1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
M-MONO-
Monocytes M-MONO-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
BF *1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
“HPF”
<1/HPF,
1-4/HPF,
0 to 5-9/HPF,
M-BASO-
Basophils M-BASO-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 10-19/HPF,
BF *1 20-29/HPF,
30-49/HPF,
50-99/HPF,
100-/HPF,
B.6 Body Fluid Visual Examination (Profile: Visual body fluid)

Country/region Result value information of RAW data*1


Name for host

America
Parameter Result value type Result value type Result value type

Korea
China
North

Other
Japan
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
-,
0 to +-,
Bacteria- M-COCCI-
M-COCCI-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 1+,
Cocci BF *1 2+,
3+,
-,
0 to +-,
Bacteria- M-RODS-
M-RODS-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 1+,
Rods BF *1 2+,
3+,
-,
0 to +-,
M-Fungi-
Fungi M-Fungi-BF ○ ○ ○ ○ ○ 9999999999.99 /μl 1+,
BF *1 2+,
3+,
-,
M- M- 0 to +-,
Monosodiu
Monosodium- Monosodiu ○ ○ ○ ○ ○ 9999999999.99 /μl 1+,
m urate *1 2+,
BF m-BF
3+,
Calcium -,
0 to +-,
pyrophosph M-Calcium M-Calcium
○ ○ ○ ○ ○ 9999999999.99 /μl 1+,
ate pyr..-BF pyr..-BF *1 2+,
dehydrate 3+,
-,
M- 0 to +-,
Cholesterol M-Cholesterol-
Cholesterol- ○ ○ ○ ○ ○ 9999999999.99 /μl 1+,
crystals BF *1 2+,
BF
3+,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
M-User1-
Setting 1 M-User1-BF ○ ○ ○ ○ ○ /µl
BF “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
M-User2-
Setting 2 M-User2-BF ○ ○ ○ ○ ○ /µl
BF “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
M-User3-
Setting 3 M-User3-BF ○ ○ ○ ○ ○ /µl
BF “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
M-User4-
Setting 4 M-User4-BF ○ ○ ○ ○ ○ /µl
BF “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
B.6 Body Fluid Visual Examination (Profile: Visual body fluid)

Country/region Result value information of RAW data*1


Name for host

America
Parameter Result value type Result value type Result value type

Korea
China
North

Other
Japan
Full name transmission
ID (quantitative) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
M-User5-
Setting 5 M-User5-BF ○ ○ ○ ○ ○ /µl
BF “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
M-User6-
Setting 6 M-User6-BF ○ ○ ○ ○ ○ /µl
BF “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
M-User7-
Setting 7 M-User7-BF ○ ○ ○ ○ ○ /µl
BF “LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,
0 to “WF” -,
9999999999.99 0/WF, 1+,
*1 1-/WF, 2+,
100-/WF, 3+,
1000-/WF, 4+,
10000-/WF,
M-User8-
Setting 8 M-User8-BF ○ ○ ○ ○ ○ /µl
BF
“LPF”
0/LPF,
<1/LPF,
1-/LPF,
10-/LPF,
100-/LPF,

<Notes>
*1: According to your laboratory operational procedures, result values (refer to ASTM field 9.4) may be changed and output for both of RAW
data and Main Format. It is output up to 12 significant digits and from zeroth decimal place to second decimal place.
* Request only necessary analysis parameters for your laboratory operational procedures.
* Even if a visual body fluid examination order is not received (or if an analysis parameter is not requested although the order is received),the
order is registered using U-WAM and the result is sent.
* Depending on the setting of U-WAM, measurement items with no result may not be output.
* When measurement items with no result input are output, "- - -" is set in the result value (see ASTM field 9.4.) And transmitted.
B.7 QC Parameters

QC parameters that are output in QC analysis results.

<UC-Control>
QC material used with the UC-3500, UC-1000. Regardless of the material level (Low, High), the same parameters are output.
(The same QC parameters are output regardless of country/region and the type of analyzer connected to U-WAM.)

[Urine chemistry analyzer]


Result value information of RAW data
Name for host
Parameter Result value type Result value type Result value type
Full name transmission
ID (reflectance) (semi-quantitative) *3 (qualitative)
(default) Data value Units Data value Units Data value Units
“Customary “Customary
units” units”
normal, 2.0, 4.0, mg/dL
8.0, 12.0
normal,1+,2+,3+
Urobilinogen URO URO 0.0 to 999.9 % “SI units” “SI units” ,4+
normal, 34.0,
μmol/L
68.0,
135.0, 202.0
“Customary
“Customary
Occult Blood units, SI
units, SI units”
BLD_H BLD 0.0 to 999.9 % units” -, +-, 1+, 2+, 3+
(hemoglobin) 0.03, 0.06, 0.15, mg/dL
0.75
“Customary “Customary
units” units”
Bilirubin BIL BIL 0.0 to 999.9 % 0.5, 1.0, 2.0 mg/dL -, 1+, 2+, 3+
“SI units” “SI units”
8.6, 17.0, 34.0 μmol/L
“Customary “Customary
units” units”
Ketone body KET KET 0.0 to 999.9 % 10, 30, 80 mg/dL -, 1+, 2+, 3+
“SI units” “SI units”
0.93, 2.8, 7.4 mmol/L
“Customary “Customary
units” units”
50, 100, 250,
mg/dL
500, -, +-, 1+, 2+, 3+,
Glucose GLU GLU 0.0 to 999.9 %
2000 4+
“SI units” “SI units”
2.8, 5.6, mmol/L
14, 28, 111
“Customary “Customary
units” units”
15, 30, 100, 300,
mg/dL -, +-, 1+, 2+, 3+,
Protein PRO PRO 0.0 to 999.9 % 1000
“SI units” “SI units” 4+
0.15, 0.3, g/L
1.0, 3.0, 10
pH PH PH 0.0 to 999.9 % 5.0 to 9.0
Nitrite NIT NIT 0.0 to 999.9 % -, +
“Customary
units, SI
Leukocyte LEU LEU 0.0 to 999.9 % 25, 75, 500
units”
-, 1+, 2+, 3+
c/µl
B.7 QC Parameters

Result value information of RAW data


Name for host
Parameter Result value type Result value type Result value type
Full name transmission
ID (reflectance) (semi-quantitative) (qualitative)
(default) Data value Units Data value Units Data value Units
“Customary “Customary
units” units”
10, 50, 100, 200,
mg/dL
Creatinine CRE CRE 0.0 to 999.9 % 300
“SI units” “SI units”
0.1, 0.5, 1.0, g/L
2.0, 3.0
“Customary “Customary
units” units”
10, 30, 80, 150,
mg/dL
Albumin ALB ALB 0.0 to 999.9 % over
“SI units” “SI units”
0.01, 0.03, 0.08, g/L
0.15, over
Specific gravity
S.G. S.G. 1.000 to 1.050
(Ref) *1
Specific gravity
s.g. s.g. 0.0 to 999.9 % 1.000 to 1.030
(test sheet) *2
*1: Only output on UC-3500
*2: Only output on UC-1000.
*3:When outputting the QC result measured with the UC-3500/1000, it is possible to switch the unit type (Customary units / SI
units) of the result value type (semi-quantitative) by setting.
B.7 QC Parameters

<UF-CONTROL>
QC material used with the urine sediment analyzer (UF-3000/3000x/4000/5000) or the particle digital imaging device
(UD-10). The parameters output vary depending on the material level (Low, High).
(The same QC parameters are output regardless of country/region and the type of analyzer connected to U-WAM.)
There is a case to be measured the quality control material of the same lot in the urine sediment analyzer (UF-
3000/3000x/4000/5000) and the particle digital imaging device (UD-10).In this case, same lot number is set in Specimen
ID. The determination of the measuring analyzer, judge in Universal Test ID.

[Urine sediment analyzer]


Name for host Material
Full name Parameter ID Data value Units
transmission (fixed) Low High
Red blood cells RBC RBC ○ ○ 0.0 to 99999.9 /μL
White blood cells WBC WBC ○ ○ 0.0 to 99999.9 /μL
Analysis Epithelial cells EC EC ○ ○ 0.0 to 99999.9 /μL
Parameters Casts CAST CAST ○ ○ 0.00 to 9999.99 /μL
Bacteria BACT BACT ○ ○ 0.0 to 99999.9 /μL
Cond. Cond. Cond. ○ ○ 0.0 to 99.9 mS/cm

Mean value of forward scattered light


SF_FSC_P SF_FSC_P ○ 0.0 to 255.0 ch
peak of RBC analyzed on SFch

Mean value of forward scattered light


SF_FSC_W SF_FSC_W ○ 0.0 to 1023.0 ch
width of RBC analyzed on SFch

Mean value of fluorescence (high


sensitivity) peak of RBC analyzed on SF_FLH_P SF_FLH_P ○ 0.0 to 255.0 ch
SFch
Mean value of lateral scattered light
(low sensitivity) peak of RBC SF_SSL_P SF_SSL_P ○ 0.0 to 255.0 ch
analyzed on SFch
Mean value of depolarized lateral
scattered light peak of RBC analyzed SF_DSS_P SF_DSS_P ○ 0.0 to 255.0 ch
on SFch
Mean value of forward scattered light
peak of WBC analyzed on CRch CW_FSC_P CW_FSC_P ○ 0.0 to 255.0 ch
(WBC)
Mean value of fluorescence (high
Sensitivity
sensitivity) peak of WBC analyzed on CW_FLH_P CW_FLH_P ○ 0.0 to 255.0 ch
Parameters
CRch (WBC)
Mean value of lateral scattered light
(high sensitivity) peak of WBC CW_SSH_P CW_SSH_P ○ 0.0 to 255.0 ch
analyzed on CRch (WBC)
Mean value of lateral scattered light
(low sensitivity) peak of WBC CW_SSL_P CW_SSL_P ○ 0.0 to 255.0 ch
analyzed on CRch (WBC)
Mean value of depolarized lateral
scattered light peak of WBC analyzed CW_DSS_P CW_DSS_P ○ 0.0 to 255.0 ch
on CRch (WBC)
Mean value of forward scattered light
peak of BACT analyzed on CRch CB_FSC_P CB_FSC_P ○ 0.0 to 255.0 ch
(BACT)
Mean value of fluorescence (low
sensitivity) peak of BACT analyzed CB_FLL_P CB_FLL_P ○ 0.0 to 255.0 ch
on CRch (BACT)
Mean value of lateral scattered light
peak of BACT analyzed on CRch CB_SSH_P CB_SSH_P ○ 0.0 to 255.0 ch
(BACT)
[Particle digital imaging device]
Material
Name for host
Full name Parameter ID level Data value Units
transmission (fixed)
Low High
C1-Class2 C1-Class2 C1-Class2 ○ ○ 0.0 to 99999.9 /uL
C1-PCD_M C1-PCD_M C1-PCD_M ○ ○ 0.0 to 99999.9 um
C1-PCN_CV C1-PCN_CV C1-PCN_CV ○ ○ 0.0 to 999.9 %
C1-FB_M C1-FB_M C1-FB_M ○ ○ 0.0 to 255.0
C2-Class2 C2-Class2 C2-Class2 ○ ○ 0.0 to 99999.9 /uL
C2-PCD_M C2-PCD_M C2-PCD_M ○ ○ 0.0 to 99999.9 um
C2-PCN_CV C2-PCN_CV C2-PCN_CV ○ ○ 0.0 to 999.9 %
C2-FB_M C2-FB_M C2-FB_M ○ ○ 0.0 to 255.0

You might also like