Professional Documents
Culture Documents
This has reference to the Finite Element Method Analysis Reports Submitted under certain
clauses of “Certification Scheme for Unmanned Aircraft Systems”:
The following details should be provided in FEA Reports for Static Load Analysis and Fatigue
Analysis:
1 Nomenclature
2 Model Information
3 Model Properties
4 Units
5 Material Properties
6 Loads and Fixtures/Constrains (boundary Conditions)
7 Mesh Information
8 Resultant Forces
a. Reaction forces
b. Reaction Moments
c. Free body forces
d. Free body moments
9 Study Results
10 Conclusion
11 Software Generated file
12 Any other applicable information
Version Number: 1.0 Revision Date: 16/02/2023 Approved by: PMU Head
Contents
1 Objective ..................................................................................................................................... 3
2 Test Conditions ........................................................................................................................... 3
3 Boundary conditions/ Inputs ...................................................................................................... 3
4 Procedure/ testing protocol........................................................................................................ 3
5 Numerical Values/Inputs ............................................................................................................ 3
6 Conclusion ................................................................................................................................... 3
7 Signed by appropriate person..................................................................................................... 3
8 Annexure A – For Static Load Analysis ........................................................................................ 3
9 Annexure B – For Fatigue Analysis .............................................................................................. 4
Version Number: 1.0 Revision Date: 16/02/2023 Approved by: PMU Head
1 Objective
Write the aim/objective
2 Test Conditions
What is being tested and for what, elaborate the pass and fail conditions for
the test. Who is conducting the test and when details to be provided
3 Boundary conditions/ Inputs
Detailed information regarding the boundary condition and inputs and in
case of flight test (Environmental condition)
4 Procedure/ testing protocol
That can be elaborated (but in plain simple language) with more theoretical
and practical references [drawing/ picture/ photograph/ audio/ video
references/ flight logs/ graphs in legible / readable format etc.]
5 Numerical Values/Inputs
All numerical values taken in calculation need to be justified even it is an
assumed value.
6 Conclusion
At the end of the report whether it is a pass/ fail with justification in brief.
7 Signed by appropriate person
8 Any other applicable information
9 Annexure A – For Static Load Analysis
• Nomenclature
• Model Information
• Study Properties (can be extracted from FEA Analysis Report)
• Units
• Material Properties
• Loads and Fixtures/Constrains (boundary Condition)
• Mesh Information
• Resultant Forces
o Reaction forces
o Reaction Moments
o Free body forces
o Free body moments
Version Number: 1.0 Revision Date: 16/02/2023 Approved by: PMU Head
Version Number: 1.0 Revision Date: 16/02/2023 Approved by: PMU Head