Professional Documents
Culture Documents
Standard Tolerances
For windings For spiral wound gaskets not otherwise specified.
Gasket Gasket Width Limits Compressed
Diameter ID OD Thickness Tolerance Minimum Maximum Thickness
Up to 1" " +1/64" -0 " +0 -1/32" 0.125"** ±0.005" 3/16" 1"†† 0.090 - 0.100"
1" to 24" " +1/32" -0 " +0 -1/32" 0.175"** ±0.005" 1/4" 1-1/2"†† 0.125 - 0.135"
24" to 36" " +3/64" -0 " +0 -1/16" 0.250"** ±0.005" 5/16" 1-1/2" ††
0.180 - 0.200"
36" to 60" " +1/16" -0 " +0 -1/16" 0.285"** ±0.005" 5/16" 1-1/2"†† 0.200 - 0.220"
60" and above " +3/32" -0 " +0 -3/32"
Note: * ASME B 16.20 standard
Available Thicknesses
Thickness tolerance is ±0.005" on all gaskets, †
Contact Garlock Engineering when
except +0.010" -0.005" on gaskets with: selecting this material.
• Less than 1" ID and greater than 26" ID ** Measured across the metallic por-
Ring(s) • PTFE filler tion of the gasket not including the
Winding Inner & Outer • Flange widths of 1" or greater filler, which may protrude slightly.
0.125" 3/32" ††
Spiral wound gaskets can be
HASTELLOY® is a registered trademark of Haynes International.
0.175" 1/8" made to large maximum widths if
INCOLOY® and INCONEL® are registered trademarks of Inco Alloys required. Call Garlock for details.
0.250" 3/16" International, Inc.
0.285" 3/16" MONEL® is a registered trademark of International Nickel.
D-19