Professional Documents
Culture Documents
Electronic devices and systems can be affected by EMI. For instance, electrical or
electronic devices used in mission-critical applications like military aerospace,
medicine, and industry need ultimate protection from electromagnetic
interference. There are several causes of EMI and this come from natural and
man-made sources.
It is crucial for engineers to understand how electromagnetic energy (EME) can result
in interference and how EMI protection works. Understanding the basic EMI
awareness helps you design gaskets that offer a good amount of shielding against
electromagnetic field in the (RF) spectrum. Radiofrequency waves usually form the
basis of radio technology. However, they transfer signals that interrupt with wireless
communications.
For instance, there is a metallic shield in a smartphone which shields electronics from
its cellular transmitter or receiver. Also, electromagnetic radiation shields help to
reduce the amount of radio frequency (RF) energy in mobile phones. The user that
might absorb the RF if there are no electromagnetic radiation shields.
their security. However, evidence has shown that there can be acoustical infection by
exploiting the electromagnetic emanations of the sound card of the system.
Electromagnetic energy, shielding radio frequencies, external magnetic field, and low
frequency magnetic fields are factors to consider in EMI shielding.
The government, military, and financial sectors make use of air grapping. Also,
human rights organizations, reporters, and activists that work with very sensitive
information adopt these measures.
There are various techniques and materials used for EM shielding. In some cases, a
braid shield or metallic foil may surround wires. This helps in blocking errant EMI
from the cased wires. In audio speakers, there is an inner metallic enclosure for
blocking EMI generated by the drivers so they don’t have a negative impact on TVs
and other electronic devices. It isn’t necessary to use complete continuous enclosure if
the openings are much smaller than the electromagnetic waves that need blocking.
Engineers can make use of conductive paints to prevent the electromagnetic fields
from networks that escape the originating business. These techniques work in a
similar way with Faraday cage, which can stop signal corruption that makes
electronics to malfunction.
Also, electronics may feature connections filtered for EMI. The integration
of electronic components such as ferrules, grounded wires, and capacitors can reduce
the impact of EMI noise. Also, you can minimize interference by simply twisting
wires together
Common EMI shielding materials used today include metal foams, flexible metal
screens, and metal wires. Also, you can apply coatings that comprise metallic inks to
the internal parts of electronic enclosures. This offers great EMI shielding solution.
Each shielding methods has its own benefits. However, particle-filled silicone is an
effective shielding material has it features the physical properties of silicone rubber
and the electrical properties of metal. Metal-coated particles are a great option for
product designers who need to offer solutions to various sealing
and insulation challenges. Also, silicone filled with metal is a good option.
The cost of EMI shielding materials is crucial considerations for gasket designers in a
wide range of industries.
Conductive Silicones
Well, Silicone is a type of material that can withstand water, sunlight, water, and
various degrees of temperatures. However, when particle-filled silicone contains more
metal particles, they can have negative effect. This is a major reason some gasket
designers may reject particle filled silicone that seem too soft or too hard.
Some engineers complained about the limitations of part size as regards long lead
times for materials and mold dimensions. Furthermore, a god number of industry
experts also claim that all particle-filled silicones can’t support thinner electronic
designs since they are too thick. Also, the cost of particle-filled products is another
consideration as this discouraged their use.
Silver-aluminum was the commonly used filler material for protecting silicones for
several years. The development of the MIL-DTL-83528 specification of the U. S
military contributed to the particle. However, things changed in 2011 when silver cost
almost $50 per Troy ounce. The fact that many gasket prints and drawings had these
elastomers specified on them became a problem. EMI gaskets that comprise silicones
were even more expensive.
Electronic designers now have a cost-effective alternative particle fills that provides
very strong EMI protection. Silver-copper and silver-glass are also commonly used.
Today, nickel-graphite silicones which are a cost-effective material function at the
shielding level of silver-aluminum. According to MIL-DTL-83528, these
Innovation in silicone compounding has turned things around for good. Particle-filled
elastomers can now meet the requirements of shielding and as well as other project
specifications. For instance, nickel-graphite silicones are soft enough for gaskets since
these silicones are available in 45, 40, and 30 durometer. Higher-durometer shielding
elastomers can withstand chemicals and fuels. These Elastomers
integrate fluorosilicone as their base. Also, these fluorosilicone compounds are
usually available in durometers of 50, 60, and 80 for applications that need EMI
gaskets.
Newer shielding materials usually comprise metal filler enough to provide electrical
conductivity and effective EMI shielding. This is not the case for older shielding
elastomers. Additionally, these conductive silicones enable cost-effective and
efficient fabrication.
To achieve great shielding effectiveness, particle-filled silicones are ideal for use with
electrically-conductive adhesives. This is crucial where Z-axis conductivity is
necessary in shielding applications. Also, there are different types of
higher-durometer, nickel-graphite silicones available. However, some EMI gasket
applications demand for added strength. This is the reason EMI materials feature
products like 65-durometer elastomer with an inner nickel-coated mesh.
In our modern environment, EMI is very common. There are two major sources of
EMI. These are natural and human made source. However, there are several
classifications of EMI. Here, we classified EMI in several ways.
This type of EMI happens from electronic device. Also, human made EMI occurs
when several signals go through one device at similar frequencies. For instance, a
radio simultaneously picking up two different stations.
Natural EMI
Natural EMI also affects electronic devices. This EMI is considered natural because
they are not human-made. It occurs due to natural phenomena on space and earth.
Natural phenomenon such as cosmic noise and electric storms are responsible for this
EMI.
The second classification is based on EMI duration. The duration here refers to the
time it takes the device to experience interference.
Continuous EMI
Continuous EMI occurs when a source keeps emitting EMI. Also, the EMI source
can either be natural or man-made. This EMI occurs as a long coupling mechanism
and it usually exists between the source of and receiver. Also, continuous EMI usually
occurs from sources such as a circuit that generates a continuous signal.
Impulse EMI
Impulse EMI is not continuous, they only occur for a very short period. The source of
this EMI can be natural or human-made. Examples include noise from lighting and
switches which generate signals that could disturb the voltage and current.
The third classification of EMI is simply based EMI’s bandwidth. The bandwidth of
EMI is the frequency range the EMI experienced. Therefore, EMI is into two types
based on this. These are Narrowband and Broadband EMI.
Narrowband EMI
Broadband EMI
There are three main elements that cause EMI noise. This include a coupling channel
between receiver and a source, noise source that produces noise, and receiving device
that impacted by noise. Engineers can achieve electromagnetic compatibility (EMC)
if they can minimize or eliminate any of these elements. Also, you need to apply very
few techniques to get rid of EMI.
Shielding
EMI shield is usually implemented to protect electrical devices from external factors
and to separate wires from the environment. Also, there are three main factors that
determine the shielding effectiveness. These factors include multiple reflections,
absorption, and reflections.
Shielded cables are electrical cables that have insulating conductors enclosed in a
conductive layer. The shield can comprise strands of a spiral tape, conducting
polymer or braided copper. Also, shielded cables are usually more rigorous and
thicker than those that aren’t shielded. Also, they need more extensive care when
working with them.
Unshielded cables can’t reduce EMI since they do not have internal shielding. These
cables use a pair of twisted wires to get rid of EMI. Also, these cables are very thin,
which makes them the best option for indoor applications in an office.
Shielded cables are usually much thicker than unshielded ones. Also, these cables also
need more extensive care.
Earth ground
The ground systems usually carry return currents and signals. Also, they create the
references for both digital and analog circuits. Therefore, they protect equipment and
humans from lightning and fault. Furthermore, flow of current in the grounding
system results in the possible differences.
Also, the current might likely not return to the path when different grounds coincide.
Furthermore, there are several factors that determine proper grounding. These factors
include the impedances and frequencies, safety issues, and the length of cabling
required.
The single-point ground is the most beneficial ground type for low-frequency
applications. When there is sensitive circuitry or cabling, avoid the daisy chain or
series connection. This is because there is a flow of return currents from three circuits
via common ground impedances. Carrier material loaded
Conclusion
Related Posts:
https://www.raypcb.com/electronic-shielding/