Professional Documents
Culture Documents
HIGHLIGHTS
Pages which have been revised are outlined below, together with the Highlights of the
Revision
--------------------------------------------------------------------------------------
CH/SE/SU C REASON FOR CHANGE EFFECTIVITY
PAGES
--------------------------------------------------------------------------------------
CHAPTER 34
__________
34-HIGHLIGHTS Page 1 of 5
REVISION NO. 53 Feb 01/09
TAI
--------------------------------------------------------------------------------------
CH/SE/SU C REASON FOR CHANGE EFFECTIVITY
PAGES
--------------------------------------------------------------------------------------
34-HIGHLIGHTS Page 2 of 5
REVISION NO. 53 Feb 01/09
TAI
--------------------------------------------------------------------------------------
CH/SE/SU C REASON FOR CHANGE EFFECTIVITY
PAGES
--------------------------------------------------------------------------------------
34-HIGHLIGHTS Page 3 of 5
REVISION NO. 53 Feb 01/09
TAI
--------------------------------------------------------------------------------------
CH/SE/SU C REASON FOR CHANGE EFFECTIVITY
PAGES
--------------------------------------------------------------------------------------
44, 95-
A028,A060-
A065,A077-
A078,A081,
A087-A090,
A093,A099,
B010,B013-
B014,B020,
B022,B034-
B041,B052,
B054,B078-
C022,C024,
C030-C031,
C033-C052
34-HIGHLIGHTS Page 4 of 5
REVISION NO. 53 Feb 01/09
TAI
--------------------------------------------------------------------------------------
CH/SE/SU C REASON FOR CHANGE EFFECTIVITY
PAGES
--------------------------------------------------------------------------------------
34-HIGHLIGHTS Page 5 of 5
REVISION NO. 53 Feb 01/09
TAI
CHAPTER 34
__________
NAVIGATION
34-L.E.P. Page 1
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 2
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 3
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 4
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 5
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 6
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 7
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 8
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 9
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 10
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 11
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 12
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 13
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 14
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 15
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 16
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 17
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 18
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 19
Feb 01/09
TAI
CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE CH/SE/SU C PAGE DATE
34-L.E.P. Page 20
Feb 01/09
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT ________
CH/SE/SU C
_ PAGE ___________
____ EFFECTIVITY
NAVIGATION - GENERAL
____________________ 34-00-00
DESCRIPTION AND OPERATION 1 ALL
General 1 ALL
System Description 1 ALL
ADIRS 1 ALL
Integrated Standby Instrument 4 ALL
System (ISIS) (optional system)
Landing and Taxiing Aids 4 ALL
Independent Position Determining 6 ALL
Dependent Position Determining 8 ALL
__________________________________
AIR DATA/INERTIAL REFERENCE SYSTEM 34-10-00
_______
(ADIRS)
DESCRIPTION AND OPERATION 1 ALL
General 1 ALL
___________________________________
AIR DATA/INERTIAL REFERENCE SYSTEM 34-10-00
________
(ADIRS)
MAINTENANCE PRACTICES 201 ALL
ADIRS Start Procedure 201 ALL
IR Alignment Procedure 206 ALL
ADIRS Stop Procedure 220 ALL
___________________________________
AIR DATA/INERTIAL REFERENCE SYSTEM 34-10-00
________
(ADIRS)
SERVICING 301 ALL
Flushing of the Principal Total 301 ALL
Pressure Lines
Flushing of the Principal Static 309 ALL
Pressure Lines
Draining and Flushing of Standby 312 001-050, 053-099
Pneumatic Circuits 201-203, 211-212
215-215, 218-222
301-304,
___________________________________
AIR DATA/INERTIAL REFERENCE SYSTEM 34-10-00
________
(ADIRS)
DEACTIVATION/REACTIVATION 401 ALL
ADIRS - Check of all Flight 401 ALL
Control Accelerometers for Correct
Operation
Refer to the MMEL TASK: 34-10-01 401 ALL
34-CONTENTS Page 1
Nov 01/08
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE ___________
____ EFFECTIVITY
___________________________________
AIR DATA/INERTIAL REFERENCE SYSTEM 34-10-00
________
(ADIRS)
ADJUSTMENT/TEST 501 ALL
Check of the ADIRS CDU Brightness 501 ALL
and Display
Test of the Angle of Attack 505 ALL
Warning
Operational Test of the 5-minute 512 ALL
Time Delay of ADIRU 2 and 3 Power
Disconnection in Emergency
Configuration
34-CONTENTS Page 2
Nov 01/08
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
215-215, 218-299
301-399, 401-499
ADIRS Power Supply Distribution 7 201-203, 211-212
in Normal Configuration 215-215, 218-299
301-399, 401-499
ADIRS Power Supply Distribution 10 201-203, 211-212
after Loss of Main Electrical 215-215, 218-299
Generation 301-399, 401-499
Circuit Breakers 11 201-203, 211-212
215-215, 218-299
301-399, 401-499
Component Description 12 201-203, 211-212
215-215, 218-299
301-399, 401-499
Static Probes 12 201-203, 211-212
215-215, 218-299
301-399, 401-499
Pitot Probes 12 201-203, 211-212
215-215, 218-299
301-399, 401-499
Air Data Modules (ADM) 15 201-203, 211-212
215-215, 218-299
301-399, 401-499
Total Air Temperature (TAT) 26 201-203,
Sensor
Total Air Temperature (TAT) 28 211-212, 215-215
Sensor 218-299, 301-399
401-499,
Angle Of Attack (AOA) Sensor 31 201-203, 211-212
215-215, 218-299
301-399, 401-499
Selector Switches 37 201-203, 301-399
Selector Switches 39 211-212, 215-215
218-299, 401-499
34-CONTENTS Page 3
Nov 01/08
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ PAGE ___________
____ EFFECTIVITY
9DA2, 9DA3)
Installation of the Pitot Probe 406 ALL
(9DA1, 9DA2, 9DA3)
PROBE - PITOT 34-11-15
ADJUSTMENT/TEST 501 ALL
Test of the Pitot Probe (9DA1, 501 ALL
9DA2, 9DA3) without the CFDS
PROBE - PITOT 34-11-15
INSPECTION/CHECK 601 ALL
Inspection/Check of the Pitot 601 ALL
Probe (9DA1, 9DA2, 9DA3)
PROBE - STATIC 34-11-16
REMOVAL/INSTALLATION 401 ALL
Removal of the Static Probe (7DA1, 401 ALL
7DA2, 7DA3, 8DA1, 8DA2, 8DA3)
Installation of the Static Probe 407 ALL
(7DA1, 7DA2, 7DA3, 8DA1, 8DA2,
8DA3)
PROBE - STATIC 34-11-16
ADJUSTMENT/TEST 501 ALL
Test of the Static Probe (7DA1, 501 ALL
8DA1, 7DA2, 8DA2, 7DA3, 8DA3)
without the CFDS.
PROBE - STATIC 34-11-16
INSPECTION/CHECK 601 ALL
Inspection of the Static Probe 601 ALL
(7DA1, 7DA2, 7DA3, 8DA1, 8DA2,
8DA3)
MODULE - AIR DATA 34-11-17
REMOVAL/INSTALLATION 401 ALL
Removal of the Air Data Module 401 ALL
(19FP1, 19FP2, 19FP3, 19FP4,
19FP5, 19FP6, 19FP7, 19FP8)
Installation of the Air Data 410 ALL
Module (19FP1, 19FP2, 19FP3,
19FP4, 19FP5, 19FP6, 19FP7, 19FP8)
MODULE - AIR DATA 34-11-17
ADJUSTMENT/TEST 501 ALL
Test of the Air Data Module 501 ALL
without the CFDS
SENSOR - TOTAL AIR TEMPERATURE 34-11-18
REMOVAL/INSTALLATION 401 ALL
Removal of the TAT Sensor (11FP1, 401 ALL
11FP2)
Installation of the TAT Sensor 407 ALL
(11FP1, 11FP2)
34-CONTENTS Page 4
Nov 01/08
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT ________
CH/SE/SU C
_ PAGE ___________
____ EFFECTIVITY
SENSOR - TOTAL AIR TEMPERATURE 34-11-18
ADJUSTMENT/TEST 501 ALL
Test of the TAT Sensor (11FP1, 501 ALL
11FP2) without the CFDS
SENSOR - TOTAL AIR TEMPERATURE 34-11-18
INSPECTION/CHECK 601 ALL
Inspection/Check of the TAT Sensor 601 ALL
(11FP1, 11FP2)
SENSOR - ANGLE OF ATTACK 34-11-19
REMOVAL/INSTALLATION 401 ALL
Removal of the Angle of Attack 401 ALL
Sensor (3FP1, 3FP2, 3FP3)
Installation of the Angle of 405 ALL
Attack Sensor (3FP1, 3FP2, 3FP3)
SENSOR - ANGLE OF ATTACK 34-11-19
INSPECTION/CHECK 601 053-099,
Inspection of the Angle-Of-Attack 601 053-099,
Sensor (3FP1, 3FP2, 3FP3)
34-CONTENTS Page 5
Nov 01/08
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
215-215, 218-299
301-399, 401-404
Electrical Interface 9 405-499,
Component Description 32 201-203, 211-212
215-215, 218-299
301-399, 401-499
ADIRS CDU 32 201-203, 211-212
215-215, 218-299
301-399, 401-404
ADIRS MSU 36 405-499,
ADIRU 39 201-203, 211-212
215-215, 218-299
301-399, 401-499
CONTROL AND DISPLAY UNIT (CDU) - ADIRS 34-12-12
REMOVAL/INSTALLATION 401 001-050, 053-099
201-203, 211-212
215-215, 218-299
301-399, 401-404
Removal of the ADIRS CDU (2FP) 401 001-050, 053-099
201-203, 211-212
215-215, 218-299
301-399, 401-404
Installation of the ADIRS CDU 405 001-050, 053-099
(2FP) 201-203, 211-212
215-215, 218-299
301-399, 401-404
REFERENCE UNIT - AIR DATA/INERTIAL 34-12-34
(ADIRU)
REMOVAL/INSTALLATION 401 ALL
Removal of the ADIRU (1FP1, 1FP2, 401 ALL
1FP3)
Installation of the ADIRU (1FP1, 407 ALL
1FP2, 1FP3)
REFERENCE UNIT - AIR DATA/INERTIAL 34-12-34
(ADIRU)
INSPECTION/CHECK 601 ALL
ADIRU Removal Criteria 601 ALL
MOUNT - ADIRU 34-12-51
REMOVAL/INSTALLATION 401 ALL
Removal of the ADIRU Mount 401 ALL
Installation of the ADIRU Mount 405 ALL
34-CONTENTS Page 6
Nov 01/08
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ ____ EFFECTIVITY
PAGE ___________
ADR Operation 1 001-050, 053-099
Operation/Control and Indicating 39 001-050, 053-099
Control 39 001-050, 053-099
Indicating 39 001-050, 053-099
Warnings 48 001-050, 053-099
DESCRIPTION AND OPERATION 2 1 201-203, 211-212
215-215, 218-299
301-399, 401-499
General 1 201-203, 211-212
215-215, 218-299
301-399, 401-499
System Description 1 201-203, 211-212
215-215, 218-299
301-399, 401-499
ADR Operation 1 201-203, 211-212
215-215, 218-299
301-399, 401-499
Operation/Control and Indicating 55 201-203, 211-212
215-215, 218-299
301-399, 401-499
Control 55 201-203, 211-212
215-215, 218-299
301-399, 401-404
Control 55 405-499,
Indicating 58 201-203, 211-212
215-215, 218-299
301-399, 401-499
Warnings 66 201-203, 211-212
215-215, 218-299
301-399, 401-404
Warnings 66 405-499,
DESCRIPTION AND OPERATION 3 1 001-050, 053-099
34-CONTENTS Page 7
Nov 01/08
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ PAGE ___________
____ EFFECTIVITY
Overspeed Warnings
Operational Test of the ALT 527 ALL
Comparison Warning
Operational Test of the ALT 534 ALL
DYNAMIC SLEW TEST
Operational Test of the CAS 541 ALL
DYNAMIC SLEW TEST
Operational Test of the AOA SENSOR 547 ALL
TEST
Operational Test of the Overspeed 548 ALL
Warnings in the Slats/Flaps and
Landing Gear Extended (VFE/VLE)
Configuration
Functional Test of the Altitude 569 001-050, 053-099
and Airspeed Data 201-203, 211-212
215-215, 218-219
301-304,
Functional Test of the Altitude 578 053-099, 215-215
and Airspeed Data (A/C with RVSM 218-299, 306-399
capability on three ADIRUs) 401-499,
Leak Test of the Principal Static 599 ALL
and Total Air Data System
INTERFACE TEST of the ADR A511 ALL
SYSTEM TEST of the ADR A529 ALL
Read the CFDIU for the ADR CURRENT A534 001-050, 053-099
STATUS
Read the CFDIU for the ADR INPUT A538 201-203, 211-212
STATUS 215-215, 218-299
301-399, 401-499
34-CONTENTS Page 8
Nov 01/08
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ ____ EFFECTIVITY
PAGE ___________
Indicating 39 001-050, 053-099
Warnings 49 001-050, 053-099
ADIRUs Performance Criteria 55 001-050, 053-099
DESCRIPTION AND OPERATION 2 1 201-203, 211-212
215-215, 218-299
301-399, 401-499
General 1 201-203, 211-212
215-215, 218-299
301-399, 401-499
System Description 1 201-203, 211-212
215-215, 218-299
301-399, 401-499
General 1 201-203, 211-212
215-215, 218-230
301-313, 401-404
Inputs 2 201-203, 211-212
215-215, 218-230
301-313, 401-404
General 2 231-299, 314-399
405-499,
Inputs 3 231-299, 314-399
405-499,
Software Computation 19 201-203, 211-212
215-215, 218-299
301-399, 401-404
Software Computation 23 405-499,
IR Output Data 39 201-203,
IR Output Data 47 211-212, 215-215
218-230, 301-313
401-404,
IR, GPS, and GPIRS Output Data 59 231-299, 314-399
405-499,
Operation/Control and Indicating A 5 201-203, 211-212
215-215, 218-299
301-399, 401-499
Control A 5 201-203, 211-212
215-215, 218-299
301-399, 401-404
Control A 9 405-499,
Indicating A 18 201-203, 211-212
215-215, 218-299
301-399, 401-404
Indicating A 19 405-499,
Warnings A 33 201-203, 211-212
215-215, 218-299
301-399, 401-404
34-CONTENTS Page 9
Nov 01/08
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ ____ EFFECTIVITY
PAGE ___________
Warnings A 40 405-499,
ADIRUs Performance Criteria A 40 201-203, 211-212
215-215, 218-299
301-399, 401-499
DESCRIPTION AND OPERATION 3 1 001-050, 053-099
Inputs 1 001-050, 053-099
ADIRUs Performance Criteria 3 001-050, 053-099
34-CONTENTS Page 10
Nov 01/08
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
301-399, 401-499
Computers Directly Linked to the 5 201-203, 211-212
CFDS 215-215, 218-299
301-399, 401-499
ADIRS Control Panel 5 201-203, 211-212
215-215, 218-299
301-399, 401-404
ADIRS Control Panel 6 405-499,
Other LRUs of the System 7 201-203, 211-212
215-215, 218-299
301-399, 401-499
System Description 8 201-203, 211-212
215-215, 218-299
301-399, 401-499
Reporting Function 8 201-203, 211-212
215-215, 218-299
301-399, 401-499
Interactive Function 47 201-203, 211-212
215-215, 218-299
301-399, 401-499
Power-up Test Initialization and 75 201-203, 211-212
Cockpit Repercussions 215-215, 218-299
301-399, 401-404
Power-up Test Initialization and 76 405-499,
Cockpit Repercussions
DESCRIPTION AND OPERATION 3 1 001-050, 053-099
201-203, 211-211
215-215, 218-222
224-228, 301-311
401-403,
__________________________
STANDBY NAVIGATION SYSTEMS 34-20-00
ADJUSTMENT/TEST 501 223-299, 306-399
401-499,
ISIS Reset 501 223-299, 306-399
401-499,
34-CONTENTS Page 11
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ ____ EFFECTIVITY
PAGE ___________
Component Location 1 001-050, 053-099
201-203, 211-212
215-215, 218-222
301-304,
System Description 1 001-050, 053-099
201-203, 211-212
215-215, 218-222
301-304,
Standby Altimeter 1 001-050, 053-099
201-203,
Standby Altimeter 7 211-212, 215-215
218-222, 301-304
Standby Airspeed Indicator 9 001-050, 053-099
201-203, 211-212
215-215, 218-222
301-304,
34-CONTENTS Page 12
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
215-215, 218-222
301-304,
ALTIMETER - STANDBY 34-21-22
ADJUSTMENT/TEST 501 001-050, 053-099
201-203, 211-212
215-215, 218-222
301-304,
ADJUSTING/ALIGNING/CALIBRATING of 501 001-050, 053-099
the Standby Altimeter 201-203, 211-212
215-215, 218-222
301-304,
INDICATOR - STANDBY AIRSPEED 34-21-26
REMOVAL/INSTALLATION 401 001-050, 053-099
201-203, 211-212
215-215, 218-222
301-304,
Removal of the Standby Airspeed 401 001-050, 053-099
Indicator (9FN) 201-203, 211-212
215-215, 218-222
301-304,
Installation of the Standby 406 001-050, 053-099
Airspeed Indicator (9FN) 201-203, 211-212
215-215, 218-222
301-304,
INDICATOR - STANDBY AIRSPEED 34-21-26
ADJUSTMENT/TEST 501 001-050, 053-099
201-203, 211-212
215-215, 218-222
301-304,
ADJUSTING/ALIGNING/CALIBRATING of 501 001-050, 053-099
the Standby Airspeed Indicator 201-203, 211-212
215-215, 218-222
301-304,
34-CONTENTS Page 13
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
301-304,
Standby Attitude 1 001-050, 053-099
201-203, 211-212
215-215, 218-222
301-304,
Component Location 1 001-050, 053-099
201-203, 211-212
215-215, 218-222
301-304,
System Description 1 001-050, 053-099
201-203, 211-212
215-215, 218-222
301-304,
Standby Compass 4 001-050, 053-099
201-203, 301-302
Standby Compass 4 211-212, 215-215
218-222, 303-304
Standby Horizon Indicator 4 001-050, 053-099
201-203, 211-212
215-215, 218-222
301-304,
34-CONTENTS Page 14
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ ____ EFFECTIVITY
PAGE ___________
Interface 19 223-299, 306-399
401-499,
Mechanical Interface 19 223-299, 306-399
401-499,
Peripherals 19 223-299, 306-399
401-499,
Component Description 23 223-299, 306-399
401-499,
External Description 23 223-299, 306-399
401-499,
Internal Description 27 223-299, 306-399
401-499,
Operation 30 223-299, 306-399
401-499,
System Performance 30 223-299, 306-399
401-499,
Control and Indicating 31 223-299, 306-399
401-499,
Test 37 223-299, 306-399
401-499,
BITE Description 37 223-299, 306-399
401-499,
34-CONTENTS Page 15
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
201-203, 211-212
215-215, 218-222
301-304,
Removal of the Standby Horizon 401 001-050, 053-099
Indicator (7FN) 201-203, 211-212
215-215, 218-222
301-304,
Installation of the Standby 404 001-050, 053-099
Horizon Indicator (7FN) 201-203, 211-212
215-215, 218-222
301-304,
INDICATOR - ISIS (INTEGRATED STANDBY 34-22-25
INSTRUMENT SYSTEM)
SERVICING 301 223-299, 306-399
401-499,
Draining and Flushing of the 301 223-299, 306-399
Standby Static and Standby Total 401-499,
Pressure lines (ISIS)
INDICATOR - ISIS (INTEGRATED STANDBY 34-22-25
INSTRUMENT SYSTEM)
REMOVAL/INSTALLATION 401 223-299, 306-399
401-499,
Removal of the ISIS Indicator 401 223-299, 306-399
(22FN) 401-499,
Installation of the ISIS Indicator 406 223-299, 306-399
(22FN) 401-499,
INDICATOR - ISIS (INTEGRATED STANDBY 34-22-25
INSTRUMENT SYSTEM)
ADJUSTMENT/TEST 501 223-299, 306-399
401-499,
Operational Check of ISIS DC HOT 501 223-299, 306-399
Bus SUPPLY 401-499,
BITE Test of the ISIS Indicator 504 223-299, 306-399
with the pushbutton switches on 401-499,
the Face of the Indicator.
Low range Leak Test of the Standby 507 223-299, 306-399
Pneumatic circuits 401-499,
Functional Test of the ISIS 517 223-299, 306-399
Indicator 401-499,
INDICATOR - ISIS (INTEGRATED STANDBY 34-22-25
INSTRUMENT SYSTEM)
INSPECTION/CHECK 601 223-299, 306-399
401-499,
ISIS Inspection for Legibility 601 223-299, 306-399
401-499,
INDICATOR - ISIS (INTEGRATED STANDBY 34-22-25
34-CONTENTS Page 16
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ PAGE ___________
____ EFFECTIVITY
INSTRUMENT SYSTEM)
CLEANING/PAINTING 701 223-299, 306-399
401-499,
Cleaning of the ISIS Indicator 701 223-299, 306-399
401-499,
ILS 34-36-00
DESCRIPTION AND OPERATION 1 1 001-050, 053-099
201-203,
General 1 001-050, 053-099
201-203,
Component Location 1 001-050, 053-099
201-203,
System Description 1 001-050, 053-099
201-203,
Principle 1 001-050, 053-099
201-203,
System Architecture 1 001-050, 053-099
201-203,
Utilization Technical Data 7 001-050, 053-099
201-203,
Warnings 11 001-050, 053-099
201-203,
Power Supply 12 001-050, 053-099
201-203,
Interface 12 001-050, 053-099
201-203,
ILS Receiver 12 001-050, 053-099
201-203,
Antennas 18 001-050, 053-099
201-203,
Component Description 18 001-050, 053-099
201-203,
Control 18 001-050, 053-099
201-203,
Reconfiguration Switching 21 001-050, 053-099
201-203,
Operation 21 001-050, 053-099
201-203,
Access to ILS Sub-Menu Functions 21 001-050, 053-099
201-203,
Activation of the Test Function 21 001-050, 053-099
201-203,
Power-up Tests Initialization 21 001-050, 053-099
and Cockpit Repercussions 201-203,
34-CONTENTS Page 17
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT ________
CH/SE/SU C
_ PAGE ___________
____ EFFECTIVITY
ILS ((MMR)) 34-36-00
DESCRIPTION AND OPERATION 2 1 211-212, 215-215
218-299, 301-399
401-499,
General 1 211-212, 215-215
218-299, 301-399
401-499,
ILS Receiver 1 211-212, 215-215
218-299, 301-399
401-499,
GPS Receiver 1 211-212, 215-215
218-299, 301-399
401-499,
Component Location 1 211-212, 215-215
218-299, 301-399
401-499,
System Description 1 211-212, 215-215
218-299, 301-399
401-499,
ILS Operation 5 211-212, 215-215
218-299, 301-399
401-499,
GPS Operation 5 211-212, 215-215
218-299, 301-399
401-499,
Maintenance Operation 6 211-212, 215-215
218-299, 301-399
401-499,
Power Supply 6 211-212, 215-215
218-299, 301-399
401-499,
Interface 6 211-212, 215-215
218-299, 301-399
401-499,
ILS Interface 6 211-212, 215-215
218-299, 301-399
401-499,
GPS Interface 8 211-212, 215-215
218-299, 301-399
401-499,
Component Description 12 211-212, 215-215
218-299, 301-399
401-499,
MMR 12 211-212, 215-215
218-299, 301-399
401-499,
34-CONTENTS Page 18
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ ____ EFFECTIVITY
PAGE ___________
GPS Antenna 17 211-212, 215-215
218-299, 301-399
401-499,
Localizer Antenna 17 211-212, 215-215
218-299, 301-399
401-499,
Glide Slope Antenna 17 211-212, 215-215
218-299, 301-399
401-499,
Operation 20 211-212, 215-215
218-299, 301-399
401-499,
ILS Operation 20 211-212, 215-215
218-299, 301-399
401-499,
GPS Function 28 211-212, 215-215
218-299, 301-399
401-499,
BITE Function 37 211-212, 215-215
218-299, 301-399
401-499,
CFDIU Interface 37 211-212, 215-215
218-299, 301-399
401-499,
BITE Implementation 50 211-212, 215-215
218-299, 301-399
401-499,
ILS 34-36-00
ADJUSTMENT/TEST 1 501 001-050, 053-099
201-203,
BITE Test of the ILS 501 001-050, 053-099
201-203,
Operational Test of the ILS 507 001-050, 053-099
201-203,
Functional Test of the ILS 510 001-050, 053-099
201-203,
34-CONTENTS Page 19
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ ____ EFFECTIVITY
PAGE ___________
Operational Test of the GPS 506 211-212, 215-215
218-299, 301-399
401-499,
Operational Test of the ILS 512 211-212, 215-215
218-299, 301-399
401-499,
Functional Test of the ILS 515 211-212, 215-215
218-299, 301-399
401-499,
ANTENNA - LOCALIZER 34-36-11
REMOVAL/INSTALLATION 401 ALL
Removal of the Localizer Antenna 401 ALL
(3RT)
Installation of the Localizer 405 ALL
Antenna (3RT)
ANTENNA - GPS ACTIVE 34-36-16
REMOVAL/INSTALLATION 401 211-212, 215-215
218-299, 301-399
401-499,
Removal of the GPS Active Antenna 401 211-212, 215-215
(43RT1, 43RT2) 218-299, 301-399
401-499,
Installation of the GPS Active 405 211-212, 215-215
Antenna (43RT1, 43RT2) with Teflon 218-299, 301-399
Seal 401-499,
Installation of the GPS Active 411 211-212, 215-215
Antenna (43RT1, 43RT2) without 218-299, 301-399
Teflon Seal 401-499,
ANTENNA - GLIDE/SLOPE 34-36-18
REMOVAL/INSTALLATION 401 ALL
Removal of the Glide/Slope Antenna 401 ALL
(4RT)
Installation of the Glide/Slope 405 ALL
Antenna (4RT)
RECEIVER - MULTI MODE (MMR) 34-36-31
REMOVAL/INSTALLATION 2 401 211-212, 215-215
218-299, 301-399
401-499,
Removal of the Multi Mode Receiver 401 211-212, 215-215
(40RT1, 40RT2) 218-299, 301-399
401-499,
Installation of the Multi Mode 405 211-212, 215-215
Receiver (40RT1, 40RT2) 218-299, 301-399
401-499,
34-CONTENTS Page 20
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ _
C ____ EFFECTIVITY
PAGE ___________
DESCRIPTION AND OPERATION 1 1 001-050, 053-099
201-203,
General 1 001-050, 053-099
201-203,
Component Location 1 001-050, 053-099
201-203,
System Description 5 001-050, 053-099
201-203,
General 5 001-050, 053-099
General 5 201-203,
General Technical 6 001-050, 053-099
Characteristics 201-203,
Power Supply 9 001-050, 053-099
201-203,
Component Description 9 001-050, 053-099
201-203,
Weather Radar Transceiver 9 001-050, 053-099
201-203,
Weather Radar Antenna 13 001-050, 053-099
201-203,
Weather Radar Control Unit 13 001-050, 053-099
201-203,
Weather Radar Wave guide and 15 001-050, 053-099
Wave guide Switch 201-203,
Data Word and Control Word 15 001-050, 053-099
Definition 201-203,
Data Word and Control Word 16 001-050, 053-099
Definition 201-203,
Operation 19 001-050, 053-099
201-203,
Basic Principles 19 001-050, 053-099
201-203,
Control and Indicating 19 001-050, 053-099
201-203,
Utilization of Controls and 23 001-050, 053-099
Indicating 201-203,
Test 28 001-050, 053-099
201-203,
Maintenance Test 28 001-050, 053-099
201-203,
Maintenance Indicators on 31 001-050, 053-099
Transceiver and Antenna Drive 201-203,
BITE Function 32 001-050, 053-099
201-203,
Power-up Tests Initialization 37 001-050, 053-099
and Cockpit Repercussions 201-203,
34-CONTENTS Page 21
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ _
C ____ EFFECTIVITY
PAGE ___________
DESCRIPTION AND OPERATION 3 1 211-212, 215-215
218-299, 301-399
401-499,
Component Location 4 211-212, 215-215
218-299, 301-399
401-499,
System Description 8 211-212, 215-215
218-299, 301-399
401-499,
General 8 211-212, 215-215
218-299, 301-399
401-499,
Peripherals 14 211-212, 215-215
218-227, 301-308
Peripherals 16 228-299, 309-399
401-499,
General Technical 20 211-212, 215-215
Characteristics 218-299, 301-399
401-499,
Power Supply 21 211-212, 215-215
218-299, 301-399
401-499,
Interface 21 211-212, 215-215
218-299, 301-399
401-499,
Digital Interface Special for 21 211-212, 215-215
Weather Radar 218-299, 301-399
401-499,
Component Description 25 211-212, 215-215
218-299, 301-399
401-499,
Transceiver 25 211-212, 215-215
218-299, 301-399
401-499,
Weather Radar Antenna 30 211-212, 215-215
218-299, 301-399
401-499,
Weather Radar Control Unit 30 211-212, 215-215
218-227, 301-308
Weather Radar Control Unit 32 228-299, 309-399
401-499,
Weather Radar Wave Guide and 32 211-212, 215-215
Wave Guide Switch 218-299, 301-399
401-499,
Operation 33 211-212, 215-215
218-299, 301-399
34-CONTENTS Page 22
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
401-499,
Operation 33 211-212, 215-215
218-299, 301-399
401-499,
Timing of Transmitted Pulses in 42 211-212, 215-215
WX/MAP Mode, in Doppler Mode 218-227, 301-308
(Turbulence) and in W/S Mode
Pulse Duration and Range Timing 44 228-299, 309-399
401-499,
Controls and Indicating 47 211-212, 215-215
218-299, 301-399
401-499,
Utilization of Controls and 51 211-212, 215-215
Indicating 218-299, 301-399
401-499,
Reconfiguration switching 78 211-212, 215-215
218-299, 301-399
401-499,
Test 79 211-212, 215-215
218-299, 301-399
401-499,
BITE Description 79 211-212, 215-215
218-299, 301-399
401-499,
34-CONTENTS Page 23
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ ____ ___________
PAGE EFFECTIVITY
REMOVAL/INSTALLATION 401 ALL
Removal of the Weather Radar 401 ALL
Transceiver (1SQ1, 1SQ2)
Installation of the Weather Radar 404 ALL
Transceiver (1SQ1, 1SQ2)
MOUNTING TRAY - WEATHER RADAR 34-41-37
TRANSCEIVER
REMOVAL/INSTALLATION 401 ALL
Removal of the Weather Radar 401 ALL
Transceiver Mounting Tray (9SQ)
Installation of the Weather Radar 406 ALL
Transceiver Mounting Tray (9SQ)
WAVE GUIDE ASSEMBLY 34-41-41
REMOVAL/INSTALLATION 401 ALL
Removal of the Wave Guide Assembly 401 ALL
Installation of the Wave Guide 406 ALL
Assembly
34-CONTENTS Page 24
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ ____ ___________
PAGE EFFECTIVITY
Antennas 28 ALL
Fans 31 ALL
Operation 31 ALL
Control 31 ALL
Reconfiguration Switching 31 ALL
Test 31 ALL
Access to Radio Altimeter 33 ALL
Sub-menu Functions
CURRENT STATUS 33 001-050, 053-099
201-203,
Activation of the Test Function 33 001-050, 053-099
201-203,
Access to Radio Altimeter 39 211-212, 215-215
Sub-menu Functions 218-299, 301-399
401-499,
Activation of the Test Function 39 211-212, 215-215
218-299, 301-399
401-499,
Power-up Tests Initialization 40 ALL
and Cockpit Repercussions
CFDIU Interface 41 211-212, 215-215
218-299, 301-399
401-499,
34-CONTENTS Page 25
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ PAGE ___________
____ EFFECTIVITY
Altimeter Transceiver 2SA1 and
2SA2
FAN - RADIO ALTIMETER TRANSCEIVER 34-42-45
REMOVAL/INSTALLATION 401 ALL
Removal of the Radio 401 ALL
Altimeter-Transceiver Fan 3SA1
(3SA2)
Installation of the Radio 405 ALL
Altimeter-Transceiver Fan 3SA1
(3SA2)
FAN - RADIO ALTIMETER TRANSCEIVER 34-42-45
CLEANING/PAINTING 701 ALL
Cleaning of the Radio Altimeter 701 ALL
Transceiver Fan
34-CONTENTS Page 26
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
301-399, 401-404
Power Supply 20 ALL
Component Description 20 ALL
TCAS Computer 21 001-050,
TCAS Computer 25 053-099, 201-203
211-212, 215-215
218-299, 301-399
401-499,
ATC/TCAS Control Unit 31 ALL
TCAS Antennas 31 ALL
Operation 31 ALL
Intruder Detection 33 234-299, 405-499
Intruder Detection 37 001-050, 053-099
201-203, 211-212
215-215, 218-233
301-399, 401-404
Measurement of Intruder 50 ALL
Parameters
Coordination 53 ALL
Principles of Computation 58 ALL
Definition of Target Aircraft 65 001-050, 201-203
301-304,
Definition of Target Aircraft 69 ALL
Sensitivity Level 80 001-050, 201-203
301-304,
Sensitivity Level 83 ALL
Information Display 86 001-050, 201-203
211-212, 215-215
218-299, 301-399
401-499,
Information Display 91 053-099,
ATC/TCAS Control Unit A 0 001-050, 201-203
Operational Use 211-212, 215-215
218-299, 301-399
401-499,
ATC/TCAS Control A 2 053-099,
Unit-Operational Use
Test A 8 ALL
Self-Test A 8 001-050, 201-203
Self-Test A 11 001-050, 053-099
201-203, 211-212
215-215, 218-233
301-399, 401-404
Self-Test A 16 053-099,
Self-Test A 17 201-203, 234-299
301-304, 405-499
34-CONTENTS Page 27
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ ____ ___________
PAGE EFFECTIVITY
CFDS A 19 ALL
34-CONTENTS Page 28
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ ____ ___________
PAGE EFFECTIVITY
System Description 5 001-050, 053-099
General 5 001-050, 053-099
Warnings 5 001-050, 053-099
Digital Data Inputs 5 001-050, 053-099
Discrete Data Inputs 5 001-050, 053-099
Discrete Data Inputs 9 001-050, 053-099
Warning Outputs 11 001-050, 053-099
Warning Outputs 15 001-050, 053-099
Monitor Output 15 001-050, 053-099
Bus Output 16 001-050, 053-099
Audio Output 16 001-050, 053-099
Power Supply 16 001-050, 053-099
Component Description 17 001-050, 053-099
GPWC (1WZ) 17 001-050, 053-099
Pushbutton Switches 23 001-050, 053-099
SYS Pushbutton Switch 9WZ 24 001-050, 053-099
Operation 25 001-050, 053-099
General 25 001-050, 053-099
Detailed Operation - Modes 1 32 001-050, 053-099
through 5
Envelope Modulation 38 001-050, 053-099
Warning Generation and 40 001-050, 053-099
Inhibition
GPWC Maintenance Output 42 001-050, 053-099
Test 42 001-050, 053-099
Airborne Self-test 44 001-050, 053-099
Ground Self-Test 44 001-050, 053-099
Airborne Self-test 45 001-050, 053-099
Ground Self-Test 45 001-050, 053-099
Ground Vocabulary Test 45 001-050, 053-099
Status History Test 46 001-050, 053-099
CFDS Interface 49 001-050, 053-099
Power-up Tests Initialization 50 001-050, 053-099
and Cockpit Repercussions
34-CONTENTS Page 29
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ ____ EFFECTIVITY
PAGE ___________
Digital Data Inputs 17 211-212, 215-215
218-225, 301-307
Digital Data Inputs 17 001-050, 053-099
Digital Data Inputs 20 053-099,
Digital Data Inputs 20 201-203,
Digital Data Inputs 23 211-211, 215-215
219-299, 301-302
306-309, 312-399
401-499,
Digital Data Inputs 26 211-212, 215-215
218-229, 301-311
401-404,
Discrete Data Inputs 26 211-212, 215-215
218-299, 301-399
401-499,
Discrete Data Inputs 30 001-050, 053-099
201-203,
Discrete Data Inputs 31 001-050, 053-099
201-203,
Warning Outputs 32 001-050, 053-099
201-203, 211-212
215-215, 218-222
301-306,
Warning Outputs 37 001-050, 201-203
211-212, 215-215
218-222, 238-299
301-306, 405-499
Warning Outputs 38 053-099, 223-237
307-399, 401-404
Monitor Outputs 39 001-050, 053-099
201-203, 211-212
215-215, 218-229
301-311, 401-404
Monitor Outputs 40 ALL
Bus Output 41 ALL
Audio Output 41 ALL
Power Supply 41 ALL
Interface 43 ALL
Digital Outputs 43 201-203,
Digital Outputs 61 211-212, 215-215
218-229, 301-311
401-404,
Digital Outputs 78 001-050, 053-099
Digital Outputs 95 001-050, 053-099
Digital Outputs A 12 201-203, 211-212
215-215, 218-299
34-CONTENTS Page 30
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
301-399, 401-499
Component Description A 29 ALL
Enhanced GPWC A 30 201-203,
Enhanced GPWC A 36 001-050, 053-099
211-212, 215-215
218-229, 301-311
401-404,
Enhanced GPWC A 41 201-203,
Enhanced GPWC A 46 211-211, 215-215
219-299, 301-302
306-309, 312-399
401-499,
Pushbutton Switches A 52 001-050, 053-099
201-203, 211-212
215-215, 218-234
301-311, 401-404
Pushbutton Switches A 56 ALL
Operation A 60 ALL
General A 60 ALL
Detailed Operation - Modes 1 A 67 ALL
through 5
Envelope Modulation A 93 001-050, 053-099
201-203, 211-212
215-215, 218-229
301-311, 401-404
Envelope Modulation A 94 201-203, 211-211
215-215, 219-299
301-302, 306-309
312-399, 401-499
Enhanced Features B 1 ALL
Warning Generation and B 64 201-203, 211-212
Inhibition 215-215, 218-222
301-306,
Warning Generation and B 79 001-050, 053-099
Inhibition
Warning Generation and B 98 001-050, 053-099
Inhibition
Warning Generation and C 0 001-050, 053-099
Inhibition
Warning Generation and C 3 201-203, 211-212
Inhibition 215-215, 218-228
301-309, 401-401
Warning Generation and C 14 201-203, 211-211
Inhibition 215-215, 219-299
301-302, 306-309
312-399, 401-499
34-CONTENTS Page 31
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ ____ EFFECTIVITY
PAGE ___________
Warning Generation and C 18 212-212, 218-218
Inhibition 229-229, 303-304
310-311, 402-404
Enhanced GPWC Maintenance Output C 21 ALL
Test C 21 ALL
Self-Tests C 26 201-203, 301-302
Self-Tests C 30 001-050, 053-099
Self-Tests C 34 001-050, 053-099
Self-Tests C 39 053-099,
Self-Tests C 41 201-203, 211-212
215-215, 218-228
301-309, 401-401
Self-Tests C 44 201-203, 211-212
215-215, 218-299
301-399, 401-499
CFDS Interface C 47 001-050, 053-099
201-203, 211-212
215-215, 218-229
301-311, 401-404
CFDS Interface C 58 201-203, 211-211
215-215, 219-299
301-302, 306-309
312-399, 401-499
BITE Implementation C 71 ALL
Power-up Test Initialization and C 72 201-203, 211-212
Cockpit Repercussions 215-215, 218-299
301-399, 401-499
34-CONTENTS Page 32
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ ____ ___________
PAGE EFFECTIVITY
BITE Test of the Enhanced GPWC 549 ALL
COMPUTER - GROUND PROXIMITY WARNING 34-48-34
(GPWC)
REMOVAL/INSTALLATION 401 ALL
Removal of the GPWC (1WZ) 401 ALL
Installation of the GPWC (1WZ) 404 ALL
DME 34-51-00
DESCRIPTION AND OPERATION 1 ALL
General 1 ALL
Component Location 1 ALL
System Description 1 ALL
Principle 1 001-050, 053-099
201-203,
System Architecture 3 001-050, 053-099
201-203,
Utilization Technical Data 3 001-050, 053-099
201-203,
Principle 12 211-212, 215-215
218-227, 301-308
System Architecture 13 211-212, 215-215
218-227, 301-308
Utilization Technical Data 13 211-212, 215-215
218-227, 301-308
Principle 15 228-299, 309-399
401-499,
System Architecture 16 228-299, 309-399
401-499,
Utilization Technical Data 16 228-299, 309-399
401-499,
Power Supply 17 ALL
Component Description 18 ALL
DME Interrogator 18 001-050, 053-099
201-203,
DME Interrogator 20 211-212, 215-215
218-299, 301-399
401-499,
DME Antenna 29 ALL
Operation 29 ALL
Control 29 ALL
Reconfiguration Switching 31 ALL
BITE Function 31 ALL
Access to DME Sub-menu Functions 34 ALL
Activation of the Test Function 34 ALL
CFDIU Interface 34 211-212, 215-215
218-299, 301-399
34-CONTENTS Page 33
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
401-499,
BITE Implementation 43 211-212, 215-215
218-299, 301-399
401-499,
Power-up Tests Initialization 44 ALL
and Cockpit Repercussions
DME 34-51-00
ADJUSTMENT/TEST 501 ALL
BITE Test of the DME 501 ALL
Operational Test of the DME 507 ALL
Functional Test of the DME 510 ALL
ANTENNA - DME 34-51-11
REMOVAL/INSTALLATION 401 ALL
Removal of the DME Antenna (3SD1, 401 ALL
3SD2)
Installation of the DME Antenna 404 ALL
(3SD1, 3SD2)
INTERROGATOR - DME 34-51-33
REMOVAL/INSTALLATION 401 ALL
Removal of the DME Interrogator 401 ALL
(2SD1, 2SD2)
Installation of the DME 404 ALL
Interrogator (2SD1, 2SD2)
34-CONTENTS Page 34
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ ____ EFFECTIVITY
PAGE ___________
Transponder Input Data 14 001-050, 053-099
201-203, 221-221
227-299, 308-399
401-499,
Transponder output buses 16 001-050, 053-099
201-203, 221-221
227-299, 308-399
401-499,
Component Description 16 ALL
ATC Transponder 16 001-050, 053-099
201-203,
ATC Transponder 18 211-212, 215-215
218-226, 301-307
ATC Transponder 20 001-050, 053-099
201-203, 221-221
227-299, 308-399
401-499,
ATC/TCAS Control Unit 52 001-050, 201-203
211-212, 215-215
218-299, 301-399
401-499,
Control Unit 52 053-099,
Antenna 56 ALL
Operation 56 ALL
Control 56 001-050, 201-203
211-212, 215-215
218-299, 301-399
401-499,
Reconfiguration Switching 58 001-050, 201-203
211-212, 215-215
218-299, 301-399
401-499,
Control 58 053-099,
Reconfiguration Switching 59 053-099,
Test 59 ALL
Maintenance Test 59 001-050, 053-099
Maintenance Test 61 201-203,
CFDIU Interface 62 211-212, 215-215
218-226, 301-307
CFDIU Interface 73 001-050, 053-099
201-203, 221-221
227-299, 308-399
401-499,
BITE Implementation 82 ALL
Power-up Tests Initialization 83 ALL
and Cockpit Repercussions
34-CONTENTS Page 35
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE ___________
____ EFFECTIVITY
ATC 34-52-00
ADJUSTMENT/TEST 501 ALL
BITE Test of the ATC 501 ALL
Operational Test of the ATC 506 ALL
Functional Test of the Altitude 509 ALL
Reporting Function
Functional Test of the ATC/Mode S 515 ALL
Transponder
Functional Test of the ATC/Mode S 528 ALL
Transponder
Functional Test of the ATC/Mode S 538 ALL
Transponder
Functional Test of the ATC 559 ALL
Antennas
ANTENNA - ATC 34-52-11
REMOVAL/INSTALLATION 401 ALL
Removal of the ATC Antenna (7SH1, 401 ALL
7SH2, 7SH3, 7SH4)
Installation of the ATC Antenna 405 ALL
(7SH1, 7SH2, 7SH3, 7SH4)
CONTROL UNIT - ATC/TCAS 34-52-12
REMOVAL/INSTALLATION 401 ALL
Removal of the ATC/TCAS Control 401 ALL
Unit (3SH)
Installation of the ATC/TCAS 404 ALL
Control Unit (3SH)
TRANSPONDER - ATC/MODE S 34-52-33
REMOVAL/INSTALLATION 401 ALL
Removal of the ATC/Mode S 401 ALL
Transponder (1SH1, 1SH2)
Installation of the ATC/Mode S 406 ALL
Transponder (1SH1, 1SH2)
ADF 34-53-00
DESCRIPTION AND OPERATION 1 ALL
General 1 ALL
Component Location 1 ALL
34-CONTENTS Page 36
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ ____ EFFECTIVITY
PAGE ___________
System Description 8 ALL
Principle 8 ALL
System Architecture 8 ALL
Utilisation Technical Data 17 ALL
Utilisation Technical Data 22 212-212,
Warning 26 ALL
Warning 27 212-212,
Power Supply 27 ALL
Component Description 28 ALL
ADF Receiver 29 001-050, 053-099
201-203,
ADF Receiver 29 211-212, 215-215
218-299, 301-399
401-499,
Loop and Sense Antenna 39 ALL
Operation 39 ALL
Test 43 ALL
Maintenance Test 43 001-050, 053-099
201-203,
Maintenance Test 43 211-212, 215-215
218-299, 301-399
401-499,
Maintenance Test 46 212-212,
CFDIU Interface 46 211-212, 215-215
218-299, 301-399
401-499,
Power-up Tests Initialization 53 ALL
and Cockpit Repercussions
Power-up Tests Initialization 56 212-212,
and Cockpit Repercussions
ADF 34-53-00
ADJUSTMENT/TEST 501 ALL
BITE Test of the ADF 501 ALL
Operational Test of the ADF 512 ALL
ANTENNA - ADF LOOP AND SENSE 34-53-11
REMOVAL/INSTALLATION 401 ALL
Removal of the ADF Loop and Sense 401 ALL
Antenna
Installation of the ADF Loop and 408 ALL
Sense Antenna
RECEIVER - ADF 34-53-31
REMOVAL/INSTALLATION 401 ALL
Removal of the ADF Receiver (2RP1, 401 ALL
2RP2)
34-CONTENTS Page 37
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
_______
SUBJECT CH/SE/SU
________ C
_ ____ ___________
PAGE EFFECTIVITY
Installation of the ADF Receiver 406 ALL
(2RP1, 2RP2)
VOR/MARKER 34-55-00
DESCRIPTION AND OPERATION 1 ALL
General 1 ALL
Foreword 1 001-050, 053-099
201-203,
VOR System 1 001-050, 053-099
201-203,
MARKER System 1 001-050, 053-099
201-203,
Foreword 1 211-212, 215-215
218-299, 301-399
401-499,
VOR System 2 211-212, 215-215
218-299, 301-399
401-499,
MARKER System 2 211-212, 215-215
218-299, 301-399
401-499,
Component Location 2 ALL
System Description 6 ALL
Principle 6 001-050, 053-099
201-203,
System Architecture 6 001-050, 053-099
201-203,
Utilization Technical Data 8 001-050, 053-099
201-203,
Warning 17 001-050, 053-099
201-203,
Principle 17 211-212, 215-215
218-299, 301-399
401-499,
System Architecture 18 211-212, 215-215
218-299, 301-399
401-499,
Utilization Technical Data 18 211-212, 215-215
218-299, 301-399
401-499,
Warning 21 211-212, 215-215
218-299, 301-399
401-499,
Power Supply 21 ALL
Component Description 22 ALL
VOR/MKR Receiver 22 001-050, 053-099
34-CONTENTS Page 38
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
201-203,
VOR/MKR Receiver 24 211-212, 215-215
218-299, 301-399
401-499,
Antennas 39 ALL
Operation 39 ALL
Control 42 ALL
Reconfiguration Switching 42 ALL
BITE Function 44 ALL
Access to the VOR/MKR Sub-menu 44 ALL
Functions
Activation of the Test Function 44 ALL
BITE Test 47 211-212, 215-215
218-299, 301-399
401-499,
CFDIU Interface 47 211-212, 215-215
218-299, 301-399
401-499,
Power-up Tests Initialization 49 ALL
and Cockpit Repercussions
VOR/MARKER 34-55-00
ADJUSTMENT/TEST 501 ALL
BITE Test of the VOR/MKR 501 ALL
Operational Test of the VOR/MKR 509 ALL
Functional Test of the VOR/MKR 511 ALL
ANTENNA - VOR 34-55-11
REMOVAL/INSTALLATION 401 ALL
Removal of the VOR Antenna 4RS 401 ALL
Installation of the VOR Antenna 405 ALL
4RS
ANTENNA - MARKER 34-55-18
REMOVAL/INSTALLATION 401 ALL
Removal of the Marker Antenna 401 ALL
(1RS)
Installation of the Marker Antenna 405 ALL
(1RS)
RECEIVER - VOR/MARKER 34-55-31
REMOVAL/INSTALLATION 401 ALL
Removal of the VOR/MKR Receiver 401 ALL
(3RS1, 3RS2)
Installation of the VOR/MKR 404 ALL
Receiver (3RS1, 3RS2)
RMI - VOR/DME 34-57-22
REMOVAL/INSTALLATION 1 401 001-050, 053-099
34-CONTENTS Page 39
Feb 01/09
R
TAI
CHAPTER 34
__________
NAVIGATION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ PAGE EFFECTIVITY
____ ___________
201-203,
Removal of the VOR/DME RMI (11FN) 401 001-050, 053-099
201-203,
Installation of the VOR/DME RMI 404 001-050, 053-099
(11FN) 201-203,
RMI - VOR/ADF/DME 34-57-22
REMOVAL/INSTALLATION 2 401 211-212, 215-215
218-299, 301-399
401-499,
Removal of the VOR/ADF/DME RMI 401 211-212, 215-215
(21FN) 218-299, 301-399
401-499,
Installation of the VOR/ADF/DME 404 211-212, 215-215
RMI (21FN) 218-299, 301-399
401-499,
RMI - ADF 34-57-25
REMOVAL/INSTALLATION 401 001-050, 053-099
201-203,
Removal of the ADF RMI (13FN) 401 001-050, 053-099
201-203,
Installation of the ADF RMI (13FN) 404 001-050, 053-099
201-203,
34-CONTENTS Page 40
Feb 01/09
R
TAI
NAVIGATION - GENERAL - DESCRIPTION AND OPERATION
________________________________________________
1. _______
General
(Ref. Fig. 001)
The aircraft navigation systems provide the crew with the data required for
flight within the most appropriate safety requirements.
These data can be divided into four groups :
- Air Data/Inertial Reference System (ADIRS)
- Landing and taxing aids
- Independent position determining
- Dependent position determining.
2. __________________
System Description
A. ADIRS
This part of the navigation system comprises :
- three Air Data/Inertial Reference Units (ADIRU)
- standby systems.
Each ADIRU performs :
- the air data function through its Air Data Reference (ADR) portion.
- the attitude, heading and position function through its Inertial
Reference (IR) portion.
1
_ The standby system includes a standby altimeter, a standby
R airspeed indicator and a metric altimeter (optional) (Ref.
R 34-21) and the optional system ISIS (Ref. 34-22). They are
R provided with pressure by static probes and pitot probe linked
R to the ADIRU 3.
More explanations are given in the ADIRU system (Ref. 34-13).
EFF :
ALL 34-00-00
Page 1
Feb 01/08
TAI
R Navigation - Systems Overvieww
R Figure 001
EFF :
ALL 34-00-00
Page 2
May 01/02
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-299, 301-399,
R 401-404,
1
_ The standby system includes a standby horizon indicator and a
standby compass (Ref. 34-22).
More explanations are given in the ADIRU system (Ref. 34-14).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-00-00
Page 3
Nov 01/08
TAI
R (b) A standby system
R 1
_ The standby system includes a standby horizon indicator and a
R standby compass (Ref. 34-22).
R More data is given in the ADIRU system chapter (Ref. 34-14).
(1) The ISIS indicator, provides the following standby data on a Liquid
Crystal Display (LCD) installed in place of the standby horizon:
- Attitude,
- Standard or baro-corrected altitude and related barometric pressure
- Indicated airspeed and Mach number
- Lateral acceleration
and the following optional parameters:
- ILS deviation
- V-bar aircraft symbol
- Barometric pressure in hPa or in hPa and in.Hg
- Altitude in meters.
In addition, two specific functions are available:
- Display and adjustment of four airspeed bugs and four airspeed
altitude bugs
- Automatic test procedure.
More explanations are given in the ISIS system (Ref. 34-22).
EFF :
ALL 34-00-00
Page 4
Nov 01/08
TAI
(2) Head Up Display (HUD) (optional system)
The aircraft is equipped with :
- a HUDC (Head Up Display Computer)
- a OHU (Optical Head Unit).
This system provides the Captain with an image superimposed on the
outside world in his field of view. This image gives the guidance
information in take-off, landing or approach configurations.
The HUDC processes the input parameters received from the Display
Management Computer 1 (DMC1), which can be switched to the DMC3, and
sends them to the OHU after transformation.
More explanations are given in the HUD system (Ref. 34-35).
(a) The ILS system enables to know the aircraft position during the
landing phase with respect to a predetermined descent path.
This system is composed of:
- two ILS receivers
- a Localizer antenna
- a Glide/Slope antenna.
1
_ The ILS function is to provide the crew and the airborne
system users with lateral (LOC) and vertical (Glide/Slope)
deviations signals, with respect to the approach ILS radio
beam transmitted by a ground station.
2
_ The GPS function is a radio aid to worldwide navigation which
provides:
- the crew with a readout of accurate navigation information,
e.g. position, track and speed.
- the Flight Management and Guidance Computer (FMGC) with
position information, for accurate position fixing.
The MMR system is composed of:
- two MMR receivers
- a Localizer antenna
- a Glide/Slope antenna
- two GPS ACTIVE antennas.
EFF :
ALL 34-00-00
Page 5
Nov 01/08
R
TAI
D. Independent Position Determining
This part of the navigation system, which is basically independent of
ground installations, provides data on the position of the aircraft. It
comprises :
EFF :
ALL 34-00-00
Page 6
Nov 01/08
R
TAI
system provides the pilots with aural and visual advisories which
indicate the vertical avoidance maneuvers.
The aircraft is equipped with :
- a TCAS computer unit
- two TCAS antennas.
The system exchanges data with the Air Traffic Control (ATC) System.
Traffic advisories are shown on the EFIS displays.
More explanations are given in the TCAS system (Ref. 34-43).
(a) The GPWS generates aural and visual warnings if the aircraft
adopts a potentially hazardous condition with respect to:
- Mode 1 - Excessive rate of descent
- Mode 2 - Excessive closure rate with terrain
- Mode 3 - Descent after takeoff and minimum terrain clearance
- Mode 4 - Unsafe terrain clearance
- Mode 5 - Descent below glide slope.
The system is operative between 30ft and 2450ft radio altitude.
EFF :
ALL 34-00-00
Page 7
Nov 01/08
R
TAI
E. Dependent Position Determining
This part of the navigation system comprises :
EFF :
ALL 34-00-00
Page 8
Nov 01/08
R
TAI
- a VOR antenna to supply the two VOR/MKR receivers
- a MARKER antenna to supply the VOR/MKR receiver 1 which is the only
one to ensure the MARKER function.
The system receives frequency information from FMGCs or RMPs.
VOR data are displayed on:
- two EFIS PFDs
- two EFIS NDs
- a VOR/DME Radio magnetic Indicator (RMI) or a VOR/ADF/DME RMI
(optional) (Ref. 34-57).
Marker data are displayed on CAPT and F/O PFDs and NDs.
More explanations are given in the VOR/MARKER system (Ref. 34-55).
EFF :
ALL 34-00-00
Page 9
Nov 01/08
TAI
AIR DATA/INERTIAL REFERENCE SYSTEM (ADIRS) - DESCRIPTION AND OPERATION
______________________________________________________________________
1. General
_______
EFF :
ALL 34-10-00
Page 1
Nov 01/08
TAI
ADIRU - Block Diagram
Figure 001
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-10-00
Page 2
Nov 01/08
TAI
R ADIRU - Block Diagram
R Figure 001A
EFF :
405-499, 34-10-00
Page 3
Nov 01/08
TAI
R - Six static probes (ATA 34-11)
R - Eight Air Data Modules (ADM) connected to the pitot and static probes (ATA
R 34-11)
R - Two Total Air Temperature (TAT) sensors (ATA 34-11)
R - Three Angle of Attack (AOA) sensors (ATA 34-11)
R Each of the ADIRUs has two parts:
R - The Air Data Reference (ADR) part which supplies air data parameters (ATA
R 34-13)
R - The Inertial Reference (IR) portion which supplies attitude and navigation
R parameters (ATA 34-14).
R The parameters are transmitted to the user systems through the ARINC 429
R buses.
R The Built-In Test Equipment (BITE) is included in the ADIRUs and the ADMs.
R It senses and identifies a failure related to the ADIRS and sends it to the
R Centralized Fault Display System (CFDS) (ATA 34-18).
EFF :
405-499, 34-10-00
Page 4
Nov 01/08
TAI
AIR DATA/INERTIAL REFERENCE SYSTEM (ADIRS) - MAINTENANCE PRACTICES
__________________________________________________________________
TASK 34-10-00-860-002
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-10-00-860-061
(2) Do the EIS start procedure (PFDs and NDs only) (Ref. TASK 31-60-00-
860-001).
EFF :
ALL 34-10-00
Page 201
Nov 01/07
TAI
R **ON A/C 211-212, 215-215, 218-227, 301-308,
Subtask 34-10-00-860-061-A
WARNING : MAKE SURE THAT ALL PERSONS ARE AWAY FROM THE SATCOM ANTENNAS
_______
(MORE THAN 3 METERS) WHEN YOU DO THIS TEST. THE SATCOM ANTENNAS
USE HIGH POWER WHEN THEY TRANSMIT AND CAN CAUSE INJURY TO
PERSONS.
(2) Do the EIS start procedure (PFDs and NDs only) (Ref. TASK 31-60-00-
860-001).
Subtask 34-10-00-010-065
B. Get Access
(1) Put the access platform in position at the access door 822.
EFF :
ALL 34-10-00
Page 202
Nov 01/08
TAI
Subtask 34-10-00-865-070
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-10-00
Page 203
Nov 01/08
TAI
**ON A/C ALL
4. Procedure
_________
Subtask 34-10-00-710-065
(b) Make sure that the ON BAT light comes on for 5 seconds and the
ALIGN legend of the IR1, IR2 and IR3 annunciators comes on.
(c) Make sure that the FAULT and OFF legends of the ADR1, ADR2 and
ADR3 pushbutton switches are off.
(2) On the CAPT and F/O main instrument panels, on the PFDs :
- make sure that the CAS, ALT and V/S come into view.
- make sure that the attitude data come into view 40 seconds
approximetaly after the three selector switches are at NAV.
(3) On the ADIRS CDU, set the SYS DISPLAY selector switch to 1 and the
DATA DISPLAY selector switch to PPOS, and make sure that dashes are
shown on the CDU display.
R Subtask 34-10-00-710-065-A
R (b) Make sure that the ON BAT light comes on for 5 seconds and then
R goes off.
R (c) Make sure that the FAULT and OFF legends of the ADR1, ADR2 and
R ADR3 pushbutton switches are off.
EFF :
ALL 34-10-00
Page 204
Nov 01/08
TAI
R (d) Make sure that the FAULT and OFF legends of the IR1, IR2 and IR3
R pushbutton switches are off.
R (2) On the CAPT and F/O main instrument panels, on the PFDs :
R - Make sure that the CAS, ALT and V/S come into view.
R - Make sure that the attitude data come into view 40 seconds
R approximetaly after the three selector switches are at NAV.
5. Close-up
________
Subtask 34-10-00-410-065
A. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-10-00
Page 205
Nov 01/08
TAI
TASK 34-10-00-860-004
IR Alignment Procedure
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-10-00-860-057
R
EFF :
ALL 34-10-00
Page 206
Nov 01/08
TAI
(3) On the overhead panel:
- on the FLT CTL panels 23VU and 24VU, make sure that the FAC, ELAC
and SEC pushbutton switches are not pushed (the OFF legends are
on).
- on the ADIRS CDU, make sure that the three OFF/NAV/ATT selector
switches are at OFF.
(4) On the glareshield, on the CAPT and F/O EFIS control sections of the
FCU, set the mode selector switches to ROSE/NAV.
NOTE : (1) During the alignment phase until the NAV mode is got, the
____
aircraft must not move.
NOTE : (2) During the alignment phase necessary to get the NAV mode,
____
the time for alignment is shown:
- in the right part of the display of the ADIRS CDU, if the
DATA DISPLAY selector switch is at HDG. The indication is as
follows: TTN5
- on the upper ECAM display unit, minute after minute (from 6
MN to 1 MN) as follows: IRS IN ALIGN 6 MN.
R Subtask 34-10-00-860-057-B
R (4) On the glareshield, on the CAPT and F/O EFIS control sections of the
R FCU, set the mode selector switches to ROSE/NAV.
R NOTE : (1) During the alignment phase until the NAV mode is got, the
____
R aircraft must not move.
R
EFF : 001-050, 053-099, 201-203, 228-299,
301-304, 309-399, 401-499,
34-10-00
Page 207
Nov 01/08
TAI
R NOTE : (2) During the alignment phase necessary to get the NAV mode,
____
R the time for alignment is shown:
R - On the upper ECAM display unit, minute after minute (from 6
R MN to 1 MN) as follows: IRS IN ALIGN 6 MN.
Subtask 34-10-00-860-057-A
WARNING : MAKE SURE THAT ALL PERSONS ARE AWAY FROM THE SATCOM ANTENNAS
_______
(MORE THAN 3 METERS) WHEN YOU DO THIS TEST. THE SATCOM ANTENNAS
USE HIGH POWER WHEN THEY TRANSMIT AND CAN CAUSE INJURY TO
PERSONS.
(4) On the glareshield, on the CAPT and F/O EFIS control sections of the
FCU, set the mode selector switches to ROSE/NAV.
NOTE : (1) During the alignment phase until the NAV mode is got, the
____
aircraft must not move.
NOTE : (2) During the alignment phase necessary to get the NAV mode,
____
the time for alignment is shown:
- in the right part of the display of the ADIRS CDU, if the
DATA DISPLAY selector switch is at HDG. The indication is as
follows: TTN5
- on the upper ECAM display unit, minute after minute (from 6
MN to 1 MN) as follows: IRS IN ALIGN 6 MN.
R
EFF :
405-499,
211-212, 215-215, 218-227, 301-308, 34-10-00
Page 208
Nov 01/08
TAI
**ON A/C ALL
Subtask 34-10-00-010-062
B. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-10-00-865-079
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FCU/1 9CA1 B05
49VU AUTO FLT/FMGC/1 10CA1 B02
49VU AUTO FLT/MCDU/1 11CA1 B01
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-10-00
Page 209
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
**ON A/C ALL
EFF :
ALL 34-10-00
Page 210
Nov 01/08
TAI
**ON A/C ALL
4. Procedure
_________
Subtask 34-10-00-860-058
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- on the CDU keyboard, enter the The ADIRS CDU shows the coordinates
present position (example for N 43-36-8 (in the left part of the
Toulouse): display) and
N 43⁰ 36 8 then push the ENT E 1-21-9 (in the right part of the
key, display).
E 1⁰ 21 9 then push the ENT
key.
EFF :
ALL 34-10-00
Page 211
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
key and enter new data as
above.
-------------------------------------------------------------------------------
| MAINTENANCE INDICATION | DESCRIPTION |
| ON THE CDU | |
-------------------------------------------------------------------------------
| STS - IRU FAULT | Critical failure. Remove the IRU for |
| | maintenance. |
-------------------------------------------------------------------------------
| STS - DELAYED MAINT | Non critical failure. Remove the IRU |
| | if necessary. |
-------------------------------------------------------------------------------
| STS - ENTER P POS | Enter the present position. |
-------------------------------------------------------------------------------
| STS - SELECT ATT | Non critical failure. Set the ATT mode |
-------------------------------------------------------------------------------
| STS - XCESS MOTION | Excessive movements of the aircraft |
| | during the alignment. |
-------------------------------------------------------------------------------
| STS - ADR FAULT | ADR non valid. |
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-10-00
Page 212
Nov 01/08
TAI
-------------------------------------------------------------------------------
| MAINTENANCE INDICATION | DESCRIPTION |
| ON THE CDU | |
-------------------------------------------------------------------------------
| STS - CHECK CK/BK | Do the check of the circuit breaker. |
-------------------------------------------------------------------------------
| STS - CDU FAULT | Remove the CDU for maintenance. |
-------------------------------------------------------------------------------
| STS - ENT MAG HDG | Enter the magnetic heading in |
| | attitude mode. |
-------------------------------------------------------------------------------
NOTE : These status indications are given to help you. They come into
____
view only when the DATA DISPLAY selector switch on the ADIRS CDU
is at STS, after a fault detection.
Subtask 34-10-00-860-059
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-10-00
Page 213
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
DATA DISPLAY selector switch to
PPOS.
- Push the MCDU MENU mode key. The MCDU MENU page comes into view.
- Push the INIT mode key. The INIT A page comes into view.
- Push the line key adjacent to - The code number comes into view below
the CO RTE indication the CO RTE indication.
- The latitude and longitude are shown
below the LAT and LONG indications.
The slew prompts (up and down arrow)
adjacent to the LAT indication are
shown.
- The ALIGN IRS indication is shown on
the line above the LONG coordinates.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-10-00
Page 214
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- on the MCDU keyboard, push one The LAT coordinates increase or
of the two slew keys. decrease:
- by 1 minute, each time you push the
slew key
- by 1 minute/second, if you push and
hold the slew key.
- on the MCDU, push the line key The slew prompts (up and down arrow)
adjacent to the LONG move to the LONG indication.
coordinates.
6. On the MCDU, push the line key On the MCDU, the ALIGN IRS indication
adjacent to the ALIGN IRS goes out of view.
indication.
7. On the ADIRS CDU, set the SYS The coordinates which are in view on
DISPLAY selector switch to 2, the ADIRS CDU are the same as the
then to 3 and make sure that the coordinates shown on the MCDU
coordinates shown are the same After approximately 5 minutes:
for the three ADIRUs. Set the SYS - on the CAPT and F/O NDs, the HDG
DISPLAY selector switch to 1 warning flags go out of view and the
heading dial comes into view.
After approximately 10 minutes:
- on the ADIRS CDU, the ALIGN legend of
the IR1, IR2 and IR3 goes off.
- on the upper ECAM display unit, the
IRS IN ALIGN 1 MN indication goes out
of view.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-10-00
Page 215
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
10. On the related circuit breaker
panel, close the circuit breaker
10CA1.
R Subtask 34-10-00-860-059-A
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Push the MCDU MENU mode key. The MCDU MENU page comes into view.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-10-00
Page 216
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - Push the line key adjacent to
R the FMGC indication.
R - Push the INIT mode key. The INIT A page comes into view.
R - Push the line key adjacent to - The code number comes into view below
R the CO RTE indication the CO RTE indication.
R - The latitude and longitude are shown
R below the LAT and LONG indications.
R The slew prompts (up and down arrow)
R adjacent to the LAT indication are
R shown.
R - The ALIGN IRS indication is shown on
R the line above the LONG coordinates.
EFF :
405-499, 34-10-00
Page 217
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - On the MCDU, push the line key The slew prompts (up and down arrow)
R adjacent to the LONG move to the LONG indication.
R coordinates.
R 6. On the MCDU, push the line key On the MCDU, the ALIGN IRS indication
R adjacent to the ALIGN IRS goes out of view.
R indication. After approximately 5 minutes:
R - On the CAPT and F/O NDs, the HDG
R warning flags go out of view and the
R heading dial comes into view.
R After approximately 10 minutes:
R - On the upper ECAM display unit, the
R IRS IN ALIGN 1 MN indication goes out
R of view.
5. Close-up
________
Subtask 34-10-00-410-062
A. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-10-00
Page 218
Nov 01/08
TAI
(3) Close the access door 822.
EFF :
ALL 34-10-00
Page 219
Nov 01/08
TAI
TASK 34-10-00-860-005
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-10-00-860-069
4. Procedure
_________
Subtask 34-10-00-860-070
(1) On the ADIRS CDU, set the OFF/NAV/ATT selector switches to OFF.
EFF :
ALL 34-10-00
Page 220
Nov 01/08
TAI
R **ON A/C 405-499,
R Subtask 34-10-00-860-070-A
R (1) On the ADIRS MSU, set the OFF/NAV/ATT selector switches to OFF.
5. Close-up
________
Subtask 34-10-00-860-071
(1) On the panels 301VU and 500VU, set the PFD and ND potentiometers to
OFF.
EFF :
ALL 34-10-00
Page 221
Nov 01/08
TAI
AIR DATA/INERTIAL REFERENCE SYSTEM (ADIRS) - SERVICING
______________________________________________________
TASK 34-10-00-170-001
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R 34-13-00-790-002 Leak Test of the Principal Static and Total Air Data
R System
34-10-00-991-001 Fig. 301
EFF :
ALL 34-10-00
Page 301
Feb 01/09
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-10-00-010-059
(1) Put the access platform in position in the zone 123 at the access
door 812 (in the zone 122 at the access door 822).
(2) Open the access door: for ADM 19FP1 (19FP2): 812 (822).
Subtask 34-10-00-860-051
(1) Disconnect the quick-disconnect coupling from the ADM 19FP1 (19FP2).
EFF :
ALL 34-10-00
Page 302
Feb 01/09
TAI
Routing of Pressure Lines
Figure 301/TASK 34-10-00-991-001
EFF :
ALL 34-10-00
Page 303
Feb 01/07
R
TAI
**ON A/C ALL
Subtask 34-10-00-860-051-A
(1) Disconnect the quick-disconnect coupling from the ADM 19FP1 (19FP2).
4. Procedure
_________
Subtask 34-10-00-170-050
(1) Blow the gas into the hose at a pressure of 2 bars (29 psi) for
approximately 3 minutes.
(2) Put the pneumatic cleaner pitot adapter on the draining hole of the
pitot probe 1(2) and blow the gas for approximately 30 seconds.
EFF :
ALL 34-10-00
Page 304
Feb 01/09
TAI
(8) Connect the quick-disconnect coupling to the ADM 19FP1 (19FP2).
(Ref. Fig. 302/TASK 34-10-00-991-003)
(9) Make sure that you can see the blue ring on the quick-disconnect
coupling.
Subtask 34-10-00-170-050-A
(1) Blow the gas into the hose at a pressure of 2 bars (29 psi) for
approximately 3 minutes.
(2) Clean draining hole of the pitot probe 1(2) with CLEANER-PITOT PROBE
and WIRE-NYLON dia. 0,7 and 0,8mm.
(9) Make sure that you can see the blue ring on the quick-disconnect
coupling.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-10-00
Page 305
Nov 01/08
TAI
R Illustration of the Quick-Disconnect coupling
R Figure 302/TASK 34-10-00-991-003
EFF :
ALL 34-10-00
Page 306
Feb 01/07
TAI
**ON A/C 053-099, 201-203, 211-212, 215-215, 218-228, 301-309, 401-401,
Subtask 34-10-00-170-050-B
(1) Blow the gas into the hose at a pressure of 2 bars (29 psi) for
approximately 3 minutes.
(2) Clean draining hole of the pitot probe 1(2) with CLEANER-PITOT PROBE
and a WIRE-NYLON, dia. 0.6mm.
(9) Make sure that you can see the blue ring on the quick-disconnect
coupling.
EFF : 053-099, 201-203, 211-212, 215-215,
218-228, 301-309, 401-401,
34-10-00
Page 307
Feb 01/09
TAI
**ON A/C ALL
Subtask 34-10-00-170-053
R (2) If two (or more) quick disconnect coupling are disconnected in two
R (or more) total pressure lines:
R (b) Do the leak test of the Principal Static and Total Air Data
R System (Ref. TASK 34-13-00-790-002).
5. Close-up
________
Subtask 34-10-00-410-059
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-10-00
Page 308
Feb 01/09
TAI
TASK 34-10-00-170-002
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R 34-13-00-790-002 Leak Test of the Principal Static and Total Air Data
R System
52-41-00-410-002 Close the Avionics Compartment Doors after Access
34-10-00-991-001 Fig. 301
34-10-00-991-003 Fig. 302
3. __________
Job Set-up
Subtask 34-10-00-010-060
(1) Put the access platform in position in the zone 128 at the access
door 824.
EFF :
ALL 34-10-00
Page 309
Feb 01/09
TAI
Subtask 34-10-00-860-052
(1) Disconnect the quick-disconnect coupling from the ADM 19FP4 or 19FP5
(19FP6 or 19FP7).
4. Procedure
_________
Subtask 34-10-00-170-051
(1) Blow the gas into the hose at a pressure of 2 bars (29 psi) for
approximately 1 minute.
(8) Make sure that you can see the blue ring on the quick-disconnect
coupling.
EFF :
ALL 34-10-00
Page 310
Feb 01/09
TAI
Subtask 34-10-00-170-054
R (2) If two (or more) Quick Disconnect coupling are disconnected on the
R two (or more) Static Pressure Lines:
R (b) Do the leak test of the Principal Static and Total Air Data
R System (Ref. TASK 34-13-00-790-002).
5. Close-up
________
Subtask 34-10-00-410-060
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-10-00
Page 311
Feb 01/09
TAI
**ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-222, 301-304,
TASK 34-10-00-170-003
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-10-00
Page 312
Feb 01/09
TAI
3. __________
Job Set-up
Subtask 34-10-00-010-061
A. Get Access
(1) Put the access platform in position in the zone 110 at the access
door 811.
Subtask 34-10-00-860-053
(1) Drain the standby air data system (Ref. TASK 12-24-34-600-001).
(2) Disconnect the quick-disconnect coupling (4) from the ADM 19FP8 and
the quick-disconnect coupling (8) from the ADM 19FP3.
(4) Remove the water drain plug (2) from the water drain (1).
(6) Disconnect the quick-disconnect coupling (7) from the red 2-pin
coupling of the standby airspeed indicator (6) and disconnect the
quick-disconnect couplings (5) from the yellow 3-pin couplings of the
standby instruments 3FN and 9FN.
(8) Connect the ADAPTER, PITOT - PNEUMATIC CLEANER to the dry nitrogen
source - 2 bars (29 psi).
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-10-00
Page 313
Feb 01/09
TAI
Location of Components Related to the Standby Pressure Lines-Schematic
Figure 303/TASK 34-10-00-991-002
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-10-00
Page 314
Nov 01/08
TAI
(9) Attach the hoses to prevent movement.
Subtask 34-10-00-860-053-A
(1) Drain the standby air data system (Ref. TASK 12-24-34-600-001).
(2) Disconnect the quick-disconnect coupling (4) from the ADM 19FP8 and
the quick-disconnect coupling (8) from the ADM 19FP3.
(4) Remove the water drain plug (2) from the water drain (1).
(6) Disconnect the quick-disconnect coupling (7) from the red 2-pin
coupling of the standby airspeed indicator (6) and disconnect the
quick-disconnect couplings (5) from the yellow 3-pin couplings of the
standby instruments 3FN and 9FN.
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-10-00
Page 315
Feb 01/09
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-222, 301-304,
4. Procedure
_________
Subtask 34-10-00-170-052
A. Draining and Flushing of the Standby Static and the Standby Total
Pressure Lines
(1) Blow the gas into each of the instrument hoses (5) and into the hose
(7), from one to the other, at a pressure of 2 bars (29 psi). Do this
for approximately 5 minutes.
(2) Put the pneumatic cleaner pitot adapter on the draining hole of the
pitot probe 3 and blow the gas for approximately 30 seconds.
(4) Put an ADAPTER COVER-STATIC PORT on the L static probe 3 then on the
R static probe 3.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-10-00
Page 316
Nov 01/08
TAI
**ON A/C 001-050, 201-203, 211-212, 215-215, 218-222, 301-304,
Subtask 34-10-00-170-052-B
A. Draining and Flushing of the Standby Static and the Standby Total
Pressure Lines
(1) Blow the gas into each of the instrument hoses (5) and into the hose
(7), from one to the other, at a pressure of 2 bars (29 psi). Do this
for approximately 5 minutes.
(2) Clean draining hole of the pitot probe 3 with CLEANER-PITOT PROBE and
WIRE-NYLON 0,7 and 0,8mm.
(4) Put an ADAPTER COVER-STATIC PORT on the L static probe 3 then on the
R static probe 3.
Subtask 34-10-00-170-052-A
A. Draining and Flushing of the Standby Static and the Standby Total
Pressure Lines
(1) Blow the gas into each of the instrument hoses (5) and into the hose
(7), from one to the other, at a pressure of 2 bars (29 psi). Do this
for approximately 5 minutes.
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-10-00
Page 317
Feb 01/09
TAI
(2) Clean draining hole of the pitot probe 3 with CLEANER-PITOT PROBE and
a WIRE-NYLON, dia. 0.6mm.
(4) Put an ADAPTER COVER-STATIC PORT on the L static probe 3 then on the
R static probe 3.
Subtask 34-10-00-860-054
(3) Install the water drain plug (2) on the water drain (1).
(4) Remove the blanking cap from the pressure switch 14WN (3).
(5) Connect the static pipe to the pressure switch 14WN (3).
(6) Connect the quick-disconnect coupling (8) to the ADM 19FP3 and the
quick-disconnect coupling (4) to the ADM 19FP8.
(Ref. Fig. 304/TASK 34-10-00-991-004)
(7) Make sure that you can see the blue ring on the quick-disconnect
couplings (4) and (8).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-10-00
Page 318
Nov 01/08
TAI
Illustration of the Quick-Disconnect coupling
Figure 304/TASK 34-10-00-991-004
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-10-00
Page 319
Nov 01/08
TAI
(8) Pull the quick-disconnect couplings to be sure that they are
correctly attached.
Subtask 34-10-00-790-052
C. Leak test
(1) Make sure that all the hoses are connected correctly.
5. Close-up
________
Subtask 34-10-00-410-061
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
(2) Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-10-00
Page 320
Nov 01/08
TAI
AIR DATA/INERTIAL REFERENCE SYSTEM (ADIRS) - DEACTIVATION/REACTIVATION
______________________________________________________________________
TASK 34-10-00-040-002
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-10-00-860-077
(2) Do the EIS start procedure (Upper ECAM DU and lower ECAM DU only)
(Ref. TASK 31-60-00-860-001).
(3) On the center pedestal, on the ECAM control panel, push the STS key
(on the lower ECAM DU, the STATUS page comes into view).
EFF :
ALL 34-10-00
Page 401
May 01/04
TAI
4. Procedure
_________
Subtask 34-10-00-040-050
A. Make sure that there is no F/CTL maintenance status on the STATUS page.
If there is the F/CTL maintenance status:
(1) Do the BITE test of the EFCS (Ground Scanning) (Ref. TASK 27-96-00-
740-001).
(2) Make sure that there are no maintenance messages related to the
flight control accelerometers 12CE1, 12CE2, 12CE3 and 12CE4.
5. Close-up
________
Subtask 34-10-00-860-078
EFF :
ALL 34-10-00
Page 402
May 01/04
R
TAI
AIR DATA/INERTIAL REFERENCE SYSTEM (ADIRS) - ADJUSTMENT/TEST
____________________________________________________________
TASK 34-10-00-710-001
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-10-00-860-063
(2) on the panel 20VU, on the ADIRS CDU, make sure that the three
OFF/NAV/ATT selector switches are at OFF.
EFF :
ALL 34-10-00
Page 501
Feb 01/96
TAI
Subtask 34-10-00-010-063
B. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-10-00-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-10-00
Page 502
Nov 01/08
TAI
R **ON A/C ALL
4. Procedure
_________
Subtask 34-10-00-710-050
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the DATA DISPLAY selector - the display (LCD) segments come on
switch to TEST and keep it in - the ENT and CLR keys come on green.
this position.
Subtask 34-10-00-710-051
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
EFF :
ALL 34-10-00
Page 503
May 01/00
TAI
5. Close-up
________
Subtask 34-10-00-860-064
Subtask 34-10-00-410-063
B. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-10-00
Page 504
May 01/98
R
TAI
TASK 34-10-00-710-007
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-10-00
Page 505
Feb 01/96
TAI
3. __________
Job Set-up
R CAUTION : MAKE SURE THAT THE AOA SENSOR CAN MOVE FREELY DURING THE TEST (IT
_______
R WILL MOVE FROM THE STANDBY POSITION TO THE TEST POSITION).
Subtask 34-10-00-860-065
NOTE : This test is for the system 1. For the systems 2 and 3, use
____
the indications between the parentheses.
(4) Do the EIS start procedure (PFD only) (Ref. TASK 31-60-00-860-001).
Subtask 34-10-00-010-064
B. Get Access
(1) Put the access platform in position at the access door 822.
EFF :
ALL 34-10-00
Page 506
Feb 01/01
TAI
Subtask 34-10-00-865-064
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-10-00
Page 507
Nov 01/08
TAI
**ON A/C ALL
Subtask 34-10-00-865-076
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
4. Procedure
_________
Subtask 34-10-00-710-062
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) 1/2 page
the ADR1 (ADR2) (ADR3) comes into view.
indication.
- push the NEXT PAGE function - the ADIRS ADR1 (ADR2) (ADR3) 2/2 page
key. comes into view.
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) AOA
the AOA SENSOR TEST indication. SENSOR TEST page comes into view with
these indications: AOA SENSOR
COMMANDED TO FIXED POSITION
CHECK STALL WARNING.
EFF :
ALL 34-10-00
Page 508
Nov 01/00
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to On the L (R) side of the fuselage, in
the TEST START indication. the zone 231 (232) (127), the angle of
attack sensor 3FP1 (3FP2) (3FP3) under
test moves to the test position.
3. Do the same procedure for the ADR You must get the same results.
2 and the ADR 3.
Subtask 34-10-00-710-062-A
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-10-00
Page 509
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) page
the ADR1 (ADR2) (ADR3) comes into view.
indication.
- push the line key adjacent to - the OUTPUT TESTS page comes into
the OUTPUT TESTS indication. view.
- push the line key adjacent to - the AOA SENSOR TEST page comes into
the AOA SENSOR TEST indication. view with these indications: AOA
SENSOR COMMANDED TO FIXED POSITION
MAKE SURE THAT THE AURAL STALL
WARNING IS GENERATED.
On the L (R) side of the fuselage, in
the zone 231 (232) (127), the angle of
attack sensor 3FP1 (3FP2) (3FP3) under
test moves to the test position.
On the panels 130VU and 131VU, the
MASTER WARN lights flash.
You can hear the cricket aural warning
and the STALL voice.
5. Close-up
________
Subtask 34-10-00-860-066
(1) On the ADIRS CDU, set the three OFF/NAV/ATT selector switches to OFF.
EFF :
ALL 34-10-00
Page 510
May 01/00
R
TAI
(3) De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
Subtask 34-10-00-865-077
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5CC1, 5CC2
Subtask 34-10-00-410-064
C. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-10-00
Page 511
May 01/00
R
TAI
TASK 34-10-00-710-009
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-10-00-860-067
EFF :
ALL 34-10-00
Page 512
May 01/97
R
TAI
(3) On the overhead panel:
- on the FLT CTL panels 23VU and 24VU, make sure that the FAC, ELAC
and SEC pushbutton switches are not pushed (in). The OFF legends
are on.
- on the panel 20VU, on the ADIRS CDU, make sure that the three
OFF/NAV/ATT selector switches are at OFF.
- on the ELEC panel 35VU, make sure that the battery voltage is
correct, between 26VDC and 30VDC.
R (4) On the SWICHING panel 8VU, make sure that the AIR DATA and ATT HDG
R selector switches are at NORMAL position.
Subtask 34-10-00-010-057
B. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-10-00-865-068
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-10-00
Page 513
May 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
**ON A/C ALL
4. Procedure
_________
Subtask 34-10-00-710-064
NOTE : Ignore the ECAM warnings that can occur when you open the circuit
____
breakers 9FP, 10FP, 4FP2, 4FP3 and 2WC.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR 2 and ADR 3 - the OFF legend comes on.
pushbutton switches. On the F/O PFD:
EFF :
ALL 34-10-00
Page 514
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- after approximately 35 seconds, the
attitude is shown.
- open the circuit breakers 2WC, - the ON BAT light comes on.
4FP2 and 10FP. - the ALIGN legend of the IR 2
annunciator stays on.
- the OFF legend ADR2 p/b sw goes off.
After 5 minutes
- the ALIGN legend of the IR 2
annunciator and the ON BAT light go
off.
On the F/O PFD:
- the ATT warning flag is shown.
- close the circuit breakers 10FP - the ON BAT light can flash for 5
and 4FP2. seconds,
- the ALIGN legend of the IR 2
annunciator comes on,
- the OFF/FAULT legend ADR 2 p/bsw can
flash for 3 seconds.
- open the circuit breakers 9FP - the ON BAT light comes on.
and 4FP3. After 5 minutes:
- the ALIGN legend of the IR 3
annunciator, the OFF legend ADR3 p/b
sw and the ON BAT light go off.
- close the circuit breakers 2WC, - the ON BAT light stays off,
4FP3 and 9FP. - the ALIGN legend of the IR 3
annunciator comes on,
- the OFF/FAULT legend ADR 3 p/bsw can
flash for 3 seconds.
EFF :
ALL 34-10-00
Page 515
Nov 01/08
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
6. On the ADIRS CDU:
- set the two OFF/NAV/ATT
selector switches to OFF.
5. Close-up
________
Subtask 34-10-00-860-068
Subtask 34-10-00-410-057
B. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-10-00
Page 516
Nov 01/08
R
TAI
SENSORS, POWER SUPPLY AND SWITCHING - DESCRIPTION AND OPERATION
_______________________________________________________________
1. _______
General
The aircraft is equipped with three Air Data/Inertial Reference Units
(ADIRUs).
Each ADIRU receives data from the four types of sensors after:
- three pitot probes which provide total pressure data,
- six static probes which provide static pressure data,
- two Total Air Temperature (TAT) sensors which provide air temperature
data,
- tree Angle Of Attack (AOA) sensors which provide angle of attack data of
the aircraft.
The TAT sensors and the angle of attack sensors are directly connected to
the ADIRUs. The pitot probes and the static probes are connected to eight
Air Data Modules (ADM) which convert pressure data before they send them to
the ADIRUs.
The sensors, the probes, the ADMs and the ADIRUs are power supplied as
follows:
-------------------------------------------
| EQUIPMENT | 28VDC | 115VAC | 26VAC |
-------------------------------------------
| ADIRU | X | X | X |
|----------------|-------|--------|-------|
| AOA Sensor | | X | X |
|----------------|-------|--------|-------|
| PITOT Probe | | X | |
|----------------|-------|--------|-------|
| TAT Sensor | | X | |
|----------------|-------|--------|-------|
| STATIC Probe | X | | |
|----------------|-------|--------|-------|
| ADM |13.5VAC from ADIRU |
-------------------------------------------
R
EFF :
001-050, 053-099, 34-11-00
Page 1
Config-1 Nov 01/00
TAI
2. Component
__________________
Location
(Ref. Fig. 001)
The sensors, probes and ADMs are located on the aircraft as follows:
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
3FP1 SENSOR-ANGLE OF ATTACK, 1 127 824 34-11-19
3FP2 SENSOR-ANGLE OF ATTACK, 2 128 824 34-11-19
3FP3 SENSOR-ANGLE OF ATTACK, 3 127 824 34-11-19
11FP1 SENSOR-TAT, 1 121 34-11-18
11FP2 SENSOR-TAT, 2 122 34-11-18
19FP1 ADM-L TOTAL PRESSURE NONE 125 812 34-11-17
19FP2 ADM-R TOTAL PRESSURE 126 822 34-11-17
19FP3 ADM-STBY TOTAL PRESSURE 125 812 34-11-17
19FP4 ADM-R STATIC PRESSURE 128 824 34-11-17
19FP5 ADM-L STATIC PRESSURE 127 824 34-11-17
19FP6 ADM-R STATIC PRESSURE 128 824 34-11-17
19FP7 ADM-L STATIC PRESSURE 127 824 34-11-17
19FP8 ADM-STBY STATIC PRESSURE 121 811 34-11-17
7DA1 PROBE-L STATIC, 1 127 824 34-11-16
7DA2 PROBE-L STATIC, 2 127 824 34-11-16
7DA3 PROBE-L STATIC, 3 121 811 34-11-16
8DA1 PROBE-R STATIC, 1 128 824 34-11-16
8DA2 PROBE-R STATIC, 2 128 824 34-11-16
8DA3 PROBE-R STATIC, 3 122 811 34-11-16
9DA1 PROBE-PITOT, 1 125 812 34-11-15
9DA2 PROBE-PITOT, 2 126 822 34-11-15
9DA3 PROBE-PITOT, 3 125 812 34-11-15
R
EFF :
001-050, 053-099, 34-11-00
Page 2
Config-1 Nov 01/00
TAI
ADIRS - Probe and Sensor Location
Figure 001
R
EFF :
001-050, 053-099, 34-11-00
Page 3
Config-1 Nov 01/00
TAI
The different ADIRS switching devices are located on the aircraft as
follows:
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
12FP RELAY-ADIRS ON BAT/GROUND WARN 103VU 126 34-11-00
13FP SEL SW-ATT HDG 8VU 210 34-11-00
14FP RELAY-ADIRS 3 PWR SHEDDING 103VU 126 34-11-00
15FP SEL SW-AIR DATA 8VU 210 34-11-00
16FP RELAY-ADIRS 3 28VDC CONTROL 103VU 126 34-11-00
17FP RELAY-ADIRS 2 PWR SHEDDING 103VU 126 34-11-00
21FP1 RELAY-AOA1 TEST 103VU 126 34-11-00
21FP2 RELAY-AOA2 TEST 103VU 126 34-11-00
21FP3 RELAY-AOA3 TEST 103VU 126 34-11-00
22FP SW-L/G DOWN VMO/MMO SELECTION 188VU 128 34-11-00
23FP RELAY-ADIRS LGCIU GND POS 103VU 126 34-11-00
------------------------------------------------------------------------------
R
EFF :
001-050, 053-099, 34-11-00
Page 4
Config-1 Nov 01/00
TAI
3. ____________
Power Supply
A. General
(Ref. Fig. 002)
The ADIRU is normally supplied with 115VAC, 400 Hz power for the ADR and
IR functions. However its AOA resolver converter module is supplied with
26VAC, 400 Hz.
The 28VDC back-up generation is provided by batteries and is
automatically used when the main power exceeds its normal limits.
At the beginning of each power cycle the ADIRU switches from the main to
the back-up power to test the electrical generation.
The table below gives the power consumption of each unit of the ADIRS:
------------------------------------------------------------------
| EQUIPMENT | 28VDC | 115VAC | 26VAC |
| |-------------------|-------------------| |
| | Typical | Maximum | Typical | Maximum | |
------------------------------------------------------------------
| ADIRU | 67 W | 84 W | 79 VA | 98 VA | 1 VA |
|----------------|---------|---------|---------|---------|-------|
| AOA Sensor | | | 250 VA | 320 VA |3.5 VA |
|----------------|---------|---------|---------|---------|-------|
| PITOT Probe | | | 281 VA | 360 VA | |
|----------------|---------|---------|---------|---------|-------|
| TAT Sensor | | | 200 VA | 350 VA | |
|----------------|---------|---------|---------|---------|-------|
| STATIC Probe | | 2X75 W | | | |
|----------------|---------|---------|---------|---------|-------|
| PHC | | 14 W | | | |
------------------------------------------------------------------
R
EFF :
001-050, 053-099, 34-11-00
Page 5
Config-1 Nov 01/00
TAI
R ADIRS - Power Supply Distribution
Figure 002
EFF :
001-050, 053-099, 34-11-00
Page 6
Config-1 Nov 01/03
TAI
B. ADIRS Power Supply Distribution in Normal Configuration
R
EFF :
001-050, 053-099, 34-11-00
Page 7
Config-1 Nov 01/00
TAI
ADIRS/PHC Interface
Figure 003
R
EFF :
001-050, 053-099, 34-11-00
Page 8
Config-1 Nov 01/00
TAI
- the heating element of the L and R static probes 3 receives 28VDC
from the 28VDC BUS 1 103PP
- the heating element of the pitot probe 3 receives 115VAC from the
115VAC BUS 1 103XP.
In normal configuration of the aircraft electrical generation, the
distribution described before is independent of the switching
selector switches.
(1) Loss of the main generation and ATT HDG selector switch in NORM
position
(2) Loss of the main generation and ATT HDG selector switch in CAPT/3
position
The CAPT/3 position of the ATT HDG selector switch corresponds to the
selection of the IR 3 in place of the IR 1. The power supply
distribution must then be modified to keep the IR 3 in emergency
configuration.
R
EFF :
001-050, 053-099, 34-11-00
Page 9
Config-1 Nov 01/00
TAI
(b) First Officer side
ADIRU 2 supply: Ref. Para. (1)(b).
R
EFF :
001-050, 053-099, 34-11-00
Page 10
Config-1 Nov 01/00
TAI
D. Circuit Breakers
The system is supplied through these circuit breakers:
-----------------------------------------------------------------------------
FIN PANEL/ DESIGNATION BUS ATA. REF. AMM
LOCATION P. BLOCK 001
-----------------------------------------------------------------------------
4FP1 49VU NAV AND PROBES/ADIRU1/115VAC 801XP-A 34-11-00
4FP2 121VU ADIRS/ADIRU/2/115VAC 204XP-C 34-11-00
4FP3 121VU ADIRS/ADIRU/3/115VAC 101XP-C 34-11-00
5FP1 49VU NAV AND PROBES/ADIRU1 & 431XP-A 34-11-00
AOA/26VAC
5FP2 121VU ADIRS/ADIRU/2/26VAC AND AOA 231XP-A 34-11-00
5FP3 121VU ADIRS/ADIRU/3/26VAC AND AOA 131XP-A 34-11-00
6FP1 105VU ADIRS/ADIRU1/28VDC 704PP 34-11-00
6FP2 121VU ADIRS/ADIRU/2/28VDC 702PP 34-11-00
6FP3 121VU ADIRS/ADIRU/3/28VDC 701PP 34-11-00
8FP 49VU NAV AND PROBES/ADIRU 3/ 401PP 34-11-00
SWTG/SPLY
9FP 121VU ADIRS/ADIRU/3 SWTG/SPLY 301PP 34-11-00
10FP 121VU ADIRS/ADIRU/2 PWR/SHED 206PP 34-11-00
1DA1 122VU ANTI ICE/PROBES/1/TAT 101XP-A 30-31-00
1DA2 122VU ANTI ICE/PROBES/2/TAT 202XP-C 30-31-00
2DA1 49VU ANTI ICE/PROBES/PHC/1 401PP 30-31-00
2DA2 122VU ANTI ICE/PROBES/2/PHC 206PP 30-31-00
2DA3 122VU ANTI ICE/PROBES/PHC/3 101PP 30-31-00
3DA1 49VU ANTI ICE/PROBES/PITOT/1 401XP-B 30-31-00
3DA2 122VU ANTI ICE/PROBES/2/PITOT 202XP-B 30-31-00
3DA3 122VU ANTI ICE/PROBES/3/PITOT 103XP-C 30-31-00
4DA1 49VU ANTI ICE/PROBES/1/AOA 801XP-C 30-31-00
4DA2 122VU ANTI ICE/PROBES/2/AOA 202XP-B 30-31-00
4DA3 122VU ANTI ICE/PROBES/3/AOA 103XP-C 30-31-00
5DA1 122VU ANTI ICE/PROBES/1/STATIC 101PP 30-31-00
5DA2 122VU ANTI ICE/PROBES/2/STATIC 206PP 30-31-00
5DA3 122VU ANTI ICE/PROBES/3/STATIC 103PP 34-11-00
R
EFF :
001-050, 053-099, 34-11-00
Page 11
Config-1 Nov 01/00
TAI
4. _____________________
Component Description
A. Static Probes
(Ref. Fig. 004)
Each of the three systems (CAPT (1), F/O (2), STBY (3)) comprises two
static probes which are linked to each ADR portion of the ADIRUs through
five ADMs.
The probe is protected from icing with a 28VDC heater circuit.
The static probes linked to ADIRU 1 and ADIRU 2 are set at 48.64 deg.
below the fuselage datum line (Z=0).
The static probes linked to ADIRU 3 are set at 29.5 deg. below the
fuselage datum line.
B. Pitot Probes
(Ref. Fig. 005)
Each system comprises one pitot probe (CAPT (1), F/O (2), STBY (3)) which
is linked to each ADR portion of the ADIRUs through one ADM.
The probe is protected from icing with a 115VAC - 400 Hz heater circuit.
The pitot probes 1 and 2 are set at 40.08 deg. below the fuselage datum
line (Z=0).
The pitot probe 3 is set at 59.56 deg. below the fuselage datum line
(Z=0).
R
EFF :
001-050, 053-099, 34-11-00
Page 12
Config-1 Nov 01/00
TAI
ADIRS - Static Probe
Figure 004
R
EFF :
001-050, 053-099, 34-11-00
Page 13
Config-1 Nov 01/00
TAI
ADIRS - Pitot Probe
Figure 005
R
EFF :
001-050, 053-099, 34-11-00
Page 14
Config-1 Nov 01/00
TAI
ADIRS - Pitot Probe
Figure 005A
R
EFF :
001-050, 053-099, 34-11-00
Page 15
Config-1 Nov 01/00
TAI
C. Air Data Modules (ADM)
(Ref. Fig. 006)
The term Air Data Module (ADM) refers to any remotely located LRU which
senses pressure information and transmits it to the ADIRU in ARINC 429
format.
The ADMs are remotely mounted near and above the level of the pitot and
static probes, this in order to make the ADM pneumatic plumbing self
draining when the aircraft is stationary on the ground.
R
EFF :
001-050, 053-099, 34-11-00
Page 16
Config-1 Nov 01/00
TAI
Air Data Module
Figure 006
R
EFF :
001-050, 053-099, 34-11-00
Page 17
Config-1 Nov 01/00
TAI
ADM - Block Diagram
Figure 007
R
EFF :
001-050, 053-099, 34-11-00
Page 18
Config-1 Nov 01/00
TAI
(a) Initialization mode
The ADM automatically enters the initialization mode immediately
after power is applied to the device or after a Watchdog Timer is
activated due to an ADM failure.
The ADM performs several tasks while in the initialization mode.
It:
- initializes software variables and hardware interfaces
- performs various self-monitoring tests to determine if the ADM
operates properly
- reads the fixed Program Pin discretes.
The ARINC 429 bus is disabled during the initialization mode. The
ADM does not output any data on the ARINC 429 bus.
The initialization mode is completed within 900 ms (maximum)
after valid power is applied to the ADM. Upon completion of the
initialization mode, the ADM automatically enters the Normal
Operation Mode.
R
EFF :
001-050, 053-099, 34-11-00
Page 19
Config-1 Nov 01/00
TAI
(3) Discrete inputs
Table 1 gives the identification of the ADM discrete inputs:
--------------------------------------------
| ADM Pin | Identification |
--------------------------------------------
| K | SDI 1 (LSB) (2) |
| L | SDI 2 (MSB) (2) |
| M | Configuration code 1 (3) |
| N | Configuration code 2 (3) |
| P | Parity (1) |
| a | Memory Access/Calibration 1 |
| b | NVM reset discrete |
| c | Memory Access/Calibration 2 |
--------------------------------------------
NOTE : (3) The ADM transmits the measured pressure with a label
____
depending on the configuration code input discretes. The
configuration code definition is provided in table 3.
------------------------------------------------------------------------
|Input discrete SDI output |Input discrete SDI output |Installation|
| pin L Bit 10 state| pin K Bit 09 state| |
|----------------------------------------------------------------------|
| open 0 | open 0 | Invalid |
| open 0 | ground 1 | 1 |
| ground 1 | open 0 | 2 |
| ground 1 | ground 1 | 3 |
------------------------------------------------------------------------
R
EFF :
001-050, 053-099, 34-11-00
Page 20
Config-1 Nov 01/00
TAI
---------------------------------------------------------------------
| Installation function | Config. code 1 | Config. code 2 | Label |
| | Pin N | Pin M | |
|-------------------------------------------------------------------|
| Total pressure | open | open | 242 |
| Left static pressure | open | ground | 176 |
| Right static pressure | ground | open | 177 |
| Averaged static | ground | ground | 245 |
| pressure (uncorrected)| | | |
---------------------------------------------------------------------
R
EFF :
001-050, 053-099, 34-11-00
Page 21
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 242 |TOTAL |100-1400 |hPa | | 18 |29- |BNR | | |
| |PRESSURE |+/- 0.25 | | | |31 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 176 |LEFT STAT |100-1100 |hPa | | 18 |29- |BNR | | |
| |PRESSURE |+/- 0.25 | | | |31 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 177 |RIGHT STAT|100-1100 |hPa | | 18 |29- |BNR | | |
| |PRESSURE |+/- 0.25 | | | |31 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 245 |AVERAGED |100-1100 |hPa | | 18 |29- |BNR | | |
| |STATIC |+/- 0.25 | | | |31 | | | |
| |PRESSURE | | | | | | | | |
| |(UNCORRTD)| | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 270 |DISCRETE |Table 5 | | | |460-|BCD | | |
| |WORD 1 | | | | |500 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 271 |DISCRETE |Table 6 | | | |460-|BCD | | |
| |WORD 2 | | | | |500 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 377 |EQUIPMENT |Table 7 | | | |460-|BCD | | |
| |IDENT | | | | |500 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 040 |SOFTWARE |Table 8 | | | |460-|BCD | | |
| |IDENT | | | | |500 | | | |
-------------------------------------------------------------------------------
Table 4 = Digital Outputs
R
EFF :
001-050, 053-099, 34-11-00
Page 22
Config-1 Nov 01/00
TAI
---------------------------------------------------------------------
| Bit |Data |
| Position | |
|-------------------------------------------------------------------|
| 1-8 |Octal Label 270 |
| 9-10 |SDI |
| 11-12 |Logic 0 |
| 13-16 |LSD device revision number (currently 4H) |
| 17-20 |MSD device revision number (currently 0H) |
| 21-24 |LS device revision letter (currently CH) |
| 25-28 |MS device revision letter (currently AH) |
| 29 |Logic 0 |
| 30-31 |Logic 0. Set the SSM to Normal Operation for a discrete |
| |maintenance word |
| 32 |Odd parity |
---------------------------------------------------------------------
---------------------------------------------------------------------
| Bit |Data |
| Position | |
|-------------------------------------------------------------------|
| 1-8 |Octal Label 271 |
| 9-10 |SDI |
| 11-13 |Logic 0 |
| 14 |ADM LRU Status |
| 15 |Pin configuration status |
| 16 |Environment status |
| 17-24 |Current fault byte matrix |
| 25-28 |Word counter |
| 29 |Logic 0 |
| 30-31 |Logic 0. Set the SSM to Normal Operation for a discrete |
| |maintenance word |
| 32 |Odd parity |
---------------------------------------------------------------------
R
EFF :
001-050, 053-099, 34-11-00
Page 23
Config-1 Nov 01/00
TAI
---------------------------------------------------------------------
| Bit |Data |
| Position | |
|-------------------------------------------------------------------|
| 1-8 |Octal Label 377 |
| 9-10 |SDI |
| 11-14 |LSD equipment identification (8H) |
| 15-18 |MSD equipment identification (3H) |
| 19-29 |Logic 0 |
| 30-31 |Logic 0. Set the SSM to Normal Operation for a discrete |
| |maintenance word |
| 32 |Odd parity |
---------------------------------------------------------------------
---------------------------------------------------------------------
| Bit |Data |
| Position | |
|-------------------------------------------------------------------|
| 1-8 |Octal Label 040 |
| 9-10 |SDI |
| 11-12 |Logic 0 |
| 13-16 |LSD software revision number |
| 17-20 |MSD software revision number |
| 21-24 |LSD manufacturer ident number (1H) |
| 25-28 |MSD manufacturer ident number (0H) |
| 29 |Logic 0 |
| 30-31 |Logic 0. Set the SSM to Normal Operation for a discrete |
| |maintenance word |
| 32 |Odd parity |
---------------------------------------------------------------------
R
EFF :
001-050, 053-099, 34-11-00
Page 24
Config-1 Nov 01/00
TAI
D. Total Air Temperature (TAT) Sensor
(Ref. Fig. 008)
The aircraft is equipped with two TAT sensors with two sensing elements
each. The sensing elements of the sensor have variable resistances. The
TAT sensor 1 is linked to the ADR portion of ADIRUs 1 and 3, the TAT
sensor 2 is linked to the ADR portion of ADIRU 2.
The TAT sensors are set at 2.33 m from the nose and at 0.60 m of the
aircraft axis below the fuselage. The TAT sensor 1 is located on the left
side and the TAT sensor 2 on the right side.
The air flow enters the scoop of the sensor, goes through a calibrated
choke and flows over the hermetically sealed platinum resistance sensing
element where the temperature is measured. The speed of the flow over the
element is controlled by the choke in the element tube.
The ADR portion is designed to operate with 500 ohms (at 0 deg. C)
temperature sensor unit corresponding to the basic Callender - Van Dusen
equation. To improve the accuracy of the sensor, a network of precision
resistors is used. This technique is identified by the term Precision
Calibration Interchangeability (PCI).
These sensors are heated with 115VAC through the probe heating system.
The heating element must not be energized on the ground.
The heating element is implanted in the scoop and strut and keeps the
probe free of ice under the most severe icing conditions.
R
EFF :
001-050, 053-099, 34-11-00
Page 25
Config-1 Nov 01/00
TAI
ADIRS - TAT Sensor
Figure 008
R
EFF :
001-050, 053-099, 34-11-00
Page 26
Config-1 Nov 01/00
TAI
E. Angle Of Attack (AOA) Sensor
(Ref. Fig. 009)
R The aircraft is equipped with three AOA sensors. Two are located on the
R left side and one on the right side of the fuselage. Each of these AOA
R sensors is respectively linked to each ADR portion of the ADIRUs. The AOA
sensors 1 and 3 are set at 6.08 deg. and 31 deg. below the fuselage datum
line (Z = 0) on the left side. The AOA sensor 2 is set at 6.08 deg. below
the fuselage datum line (Z = 0) on the right side.
The angle of attack sensor is of the wind vane type. Its sensing element
is a small wing which is positioned in the direction of airflow. The
small wing is mechanically linked to a free turn-shaft which drives the
devices transmitting the local angle of attack signal. These transmitting
devices are made up of resolver transformers which convert the angular
information into proportional electrical information (angle sine and
cosine). The resolvers are supplied with a 26VAC signal. The same signal
is also received by the ADIRU as a reference for the decoding of AOA
values. Each sensor has three resolver outputs but only two are wired to
the ADIRU.
The whole mechanism is stabilized around the rotation axis. In addition,
a damping device enables a satisfactory dynamic response to be obtained
(filtering of mechanical oscillation).
A self regulated heating element (CTP resistances: positive coefficient
of temperature) inserted into the vane eliminates or avoids icing. It is
supplied with 115VAC through the PHC (Ref. 30-31-00).
The AOA sensor is equipped with a self-test device which is activated by
a 28VDC signal, from the ADR (through the relay 21FP1, 21FP2 or 21FP3)
when the test is entered via the maintenance system (CFDIU and MCDU). The
self test positions the vane at a resolver angle of +15 deg. (left side
test) or -15 deg. (left side test).
The mounting and wing of AOA resolvers determine the relationship between
the measured resolver angle and indicated angle of attack. This
relationship for each resolver input is as follows:
(Ref. Fig. 010)
------------------------------------------------------------------------
| | Indicated AOA: | +85 | +60 | +25 | 0 | -35 |
| AOA 1 and AOA 3 |----------------------------------------------------|
| in degrees | Resolver angle: | -60 | -35 | 0 | +25 | +60 |
------------------------------------------------------------------------
| | Indicated AOA: | +85 | +60 | +25 | 0 | -35 |
| AOA 2 |-----------------------------------------------------
| in degrees | Resolver angle: | +60 | +35 | 0 | -25 | -60 |
------------------------------------------------------------------------
The ADRs receive the same 26VAC, 400 Hz reference as the AOA resolvers.
This reference is common to both AOA resolver inputs 1 and 2.
Characteristics:
EFF :
001-050, 053-099, 34-11-00
Page 27
Config-1 Feb 01/05
TAI
ADIRS - AOA Sensor
Figure 009
R
EFF :
001-050, 053-099, 34-11-00
Page 28
Config-1 Nov 01/00
TAI
AOA Sensor - Installation Definition
Figure 010
R
EFF :
001-050, 053-099, 34-11-00
Page 29
Config-1 Nov 01/00
TAI
Excitation : 26 V 400 Hz
Phase shift : 18 deg. to 30 deg.
Resolver transformer : 0.4029 to 0.4629
ratio RT
Rotor impedance : Zro = 125 + j175 ohms +/-20%
Stator impedance : Zso = 115 + j90 ohms +/-30%
Range : +/-60 deg.
Scale factor : 1 deg. resolver/1 deg. local AOA
The accuracy of the AOA sensor, at 100 knots, is +/-0.3 deg.
R
EFF :
001-050, 053-099, 34-11-00
Page 30
Config-1 Nov 01/00
TAI
F. Selector Switches
(Ref. Fig. 011)
The two selector switches AIR DATA and ATT HDG are rotary selector
switches with 3 positions: CAPT/3, NORM and F/O/3.
These selector switches are used for the functions listed below (Ref. the
respective section for more details):
- AIR DATA SEL SW (15FP):
34-14-00 Selection of the ADR used by the IR3
34-52-00 ATC mode S
31-68-00 DMC
22-85-00 FMGC
- ATT HDG SEL SW (13FP):
34-11-00 Power Supply
34-14-00 Selection of the ADR used by the IR3
34-41-00 Weather Radar
R
31-68-00 DMC
22-85-00 FMGC.
EFF :
001-050, 053-099, 34-11-00
Page 31
Config-1 Aug 01/07
TAI
ADIRS Switching
Figure 011
R
EFF :
001-050, 053-099, 34-11-00
Page 32
Config-1 Nov 01/00
TAI
SENSORS, POWER SUPPLY AND SWITCHING - DESCRIPTION AND OPERATION
_______________________________________________________________
1. _______
General
The aircraft is equipped with three Air Data/Inertial Reference Units
(ADIRUs).
Each ADIRU receives data from the four types of sensors after:
- three pitot probes which provide total pressure data,
- six static probes which provide static pressure data,
- two Total Air Temperature (TAT) sensors which provide air temperature
data,
- three Angle Of Attack (AOA) sensors which provide angle of attack data of
the aircraft.
The TAT sensors and the angle of attack sensors are directly connected to
the ADIRUs. The pitot probes and the static probes are connected to eight
Air Data Modules (ADM) which convert pressure data before they send them to
the ADIRUs.
The sensors, the probes, the ADMs and the ADIRUs are power supplied as
follows:
-------------------------------------------
| EQUIPMENT | 28VDC | 115VAC | 26VAC |
-------------------------------------------
| ADIRU | X | X | X |
|----------------|-------|--------|-------|
| AOA Sensor | | X | X |
|----------------|-------|--------|-------|
| PITOT Probe | | X | |
|----------------|-------|--------|-------|
| TAT Sensor | | X | |
|----------------|-------|--------|-------|
| STATIC Probe | X | | |
|----------------|-------|--------|-------|
| ADM |13.5VAC from ADIRU |
-------------------------------------------
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 1
Config-2 Nov 01/08
TAI
2. Component
__________________
Location
(Ref. Fig. 001)
The sensors, probes and ADMs are located on the aircraft as follows:
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
3FP1 SENSOR-ANGLE OF ATTACK, 1 127 824 34-11-19
3FP2 SENSOR-ANGLE OF ATTACK, 2 128 824 34-11-19
3FP3 SENSOR-ANGLE OF ATTACK, 3 127 824 34-11-19
11FP1 SENSOR-TAT, 1 121 34-11-18
11FP2 SENSOR-TAT, 2 122 34-11-18
19FP1 ADM-L TOTAL PRESSURE NONE 125 812 34-11-17
19FP2 ADM-R TOTAL PRESSURE 126 822 34-11-17
19FP3 ADM-STBY TOTAL PRESSURE 125 812 34-11-17
19FP4 ADM-R STATIC PRESSURE 128 824 34-11-17
19FP5 ADM-L STATIC PRESSURE 127 824 34-11-17
19FP6 ADM-R STATIC PRESSURE 128 824 34-11-17
19FP7 ADM-L STATIC PRESSURE 127 824 34-11-17
19FP8 ADM-STBY STATIC PRESSURE 121 811 34-11-17
7DA1 PROBE-L STATIC, 1 127 824 34-11-16
7DA2 PROBE-L STATIC, 2 127 824 34-11-16
7DA3 PROBE-L STATIC, 3 121 811 34-11-16
8DA1 PROBE-R STATIC, 1 128 824 34-11-16
8DA2 PROBE-R STATIC, 2 128 824 34-11-16
8DA3 PROBE-R STATIC, 3 122 811 34-11-16
9DA1 PROBE-PITOT, 1 125 812 34-11-15
9DA2 PROBE-PITOT, 2 126 822 34-11-15
9DA3 PROBE-PITOT, 3 125 812 34-11-15
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 2
Config-2 Nov 01/08
TAI
ADIRS - Probe and Sensor Location
Figure 001
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 3
Config-2 Nov 01/08
TAI
The different ADIRS switching devices are located on the aircraft as
follows:
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
12FP RELAY-ADIRS ON BAT/GROUND WARN 103VU 126 34-11-00
13FP SEL SW-ATT HDG 8VU 210 34-11-00
14FP RELAY-ADIRS 3 PWR SHEDDING 103VU 126 34-11-00
15FP SEL SW-AIR DATA 8VU 210 34-11-00
16FP RELAY-ADIRS 3 28VDC CONTROL 103VU 126 34-11-00
17FP RELAY-ADIRS 2 PWR SHEDDING 103VU 126 34-11-00
21FP1 RELAY-AOA1 TEST 103VU 126 34-11-00
21FP2 RELAY-AOA2 TEST 103VU 126 34-11-00
21FP3 RELAY-AOA3 TEST 103VU 126 34-11-00
22FP SW-L/G DOWN VMO/MMO SELECTION 188VU 128 34-11-00
23FP RELAY-ADIRS LGCIU GND POS 103VU 126 34-11-00
------------------------------------------------------------------------------
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 4
Config-2 Nov 01/08
TAI
3. ____________
Power Supply
A. General
(Ref. Fig. 002)
The ADIRU is normally supplied with 115VAC, 400 Hz power for the ADR and
IR functions. However its AOA resolver converter module is supplied with
26VAC, 400 Hz.
The 28VDC back-up generation is provided by batteries and is
automatically used when the main power exceeds its normal limits.
At the beginning of each power cycle the ADIRU switches from the main to
the back-up power to test the electrical generation.
The table below gives the power consumption of each unit of the ADIRS:
------------------------------------------------------------------
| EQUIPMENT | 28VDC | 115VAC | 26VAC |
| |-------------------|-------------------| |
| | Typical | Maximum | Typical | Maximum | |
------------------------------------------------------------------
| ADIRU (1) | 67 W | 84 W | 79 VA | 98 VA | 1 VA |
|----------------|---------|---------|---------|---------|-------|
| AOA Sensor | | | 250 VA | 320 VA |3.5 VA |
|----------------|---------|---------|---------|---------|-------|
| PITOT Probe | | | 281 VA | 360 VA | |
|----------------|---------|---------|---------|---------|-------|
| TAT Sensor | | | 200 VA | 350 VA | |
|----------------|---------|---------|---------|---------|-------|
| STATIC Probe | | 2X75 W | | | |
|----------------|---------|---------|---------|---------|-------|
| PHC | | 14 W | | | |
------------------------------------------------------------------
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 5
Config-2 Nov 01/08
TAI
ADIRS - Power Supply Distribution
Figure 002
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 6
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R The table below gives the power consumption of each unit of the
R ADIRS:
R ------------------------------------------------------------------
R | EQUIPMENT | 28 VDC | 115 VAC |26 VAC |
R | |-------------------|-------------------|--------
R | | Typical | Maximum | Typical | Maximum | |
R ------------------------------------------------------------------
R | ADIRU (1) | 67 W | 84 W | 79 VA | 98 VA | 1 VA |
R |----------------|---------|---------|---------|---------|-------|
R | AOA Sensor | | | 250 VA | 320 VA |3.5 VA |
R |----------------|---------|---------|---------|---------|-------|
R | PITOT Probe | | | 281 VA | 360 VA | |
R |----------------|---------|---------|---------|---------|-------|
R | TAT Sensor | | | 200 VA | 350 VA | |
R |----------------|---------|---------|---------|---------|-------|
R | STATIC Probe | | 2X75 W | | | |
R |----------------|---------|---------|---------|---------|-------|
R | PHC | | 14 W | | | |
R ------------------------------------------------------------------
R (1) The ADIRU power consumption includes the supply of three ADMs.
R With the ON BAT annunciator, add 5 W.
R With the IR FAULT annunciator at I = 250 mA, add 10.5 W.
R Other annunciators are open/ground discretes and so they are
R energized by a power which is different from the ADIRU power.
R When the ADIRU is in the OFF mode, all the circuitry in the ADIRU is
R de-energized except for any logic associated with the power-off
R function. The current does not exceed 10 mA DC.
R Each ADIRU supplies the power for the ADM of its side (CAPT, F/O,
R STBY).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 7
Config-2 Nov 01/08
TAI
The sensors and probes (static, TAT, pitot, AOA) are supplied for
heating through the Probe Heat Computer 1:
- the heating element of the AOA sensor 1 receives 115VAC from the
115VAC SHED ESS BUS 801XP
- the heating element of the TAT sensor 1 receives 115VAC from the
115VAC BUS 1 101XP-A
- the heating element of the L and R static probes 1 receives 28VDC
from the 28VDC BUS 1 101PP
- the heating element of the pitot probe 1 receives 115VAC from the
115VAC ESS BUS 401XP.
(Ref. Fig. 003)
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 8
Config-2 Nov 01/08
TAI
ADIRS/PHC Interface
Figure 003
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 9
Config-2 Nov 01/08
TAI
C. ADIRS Power Supply Distribution after Loss of Main Electrical Generation
(1) Loss of the main generation and ATT HDG selector switch in NORM
position
(2) Loss of the main generation and ATT HDG selector switch in CAPT/3
position
The CAPT/3 position of the ATT HDG selector switch corresponds to the
selection of the IR 3 in place of the IR 1. The power supply
distribution must then be modified to keep the IR 3 in emergency
configuration.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 10
Config-2 Nov 01/08
TAI
D. Circuit Breakers
The system is supplied through these circuit breakers:
-----------------------------------------------------------------------------
FIN PANEL/ DESIGNATION BUS ATA. REF. AMM
LOCATION P. BLOCK 001
-----------------------------------------------------------------------------
4FP1 49VU NAV AND PROBES/ADIRU1/115VAC 801XP-A 34-11-00
4FP2 121VU ADIRS/ADIRU/2/115VAC 204XP-C 34-11-00
4FP3 121VU ADIRS/ADIRU/3/115VAC 101XP-C 34-11-00
5FP1 49VU NAV AND PROBES/ADIRU1 & 431XP-A 34-11-00
AOA/26VAC
5FP2 121VU ADIRS/ADIRU/2/26VAC AND AOA 231XP-A 34-11-00
5FP3 121VU ADIRS/ADIRU/3/26VAC AND AOA 131XP-A 34-11-00
6FP1 105VU ADIRS/ADIRU1/28VDC 704PP 34-11-00
6FP2 121VU ADIRS/ADIRU/2/28VDC 702PP 34-11-00
6FP3 121VU ADIRS/ADIRU/3/28VDC 701PP 34-11-00
8FP 49VU NAV AND PROBES/ADIRU 3/ 401PP 34-11-00
SWTG/SPLY
9FP 121VU ADIRS/ADIRU/3 SWTG/SPLY 301PP 34-11-00
10FP 121VU ADIRS/ADIRU/2 PWR/SHED 206PP 34-11-00
1DA1 122VU ANTI ICE/PROBES/1/TAT 101XP-A 30-31-00
1DA2 122VU ANTI ICE/PROBES/2/TAT 202XP-C 30-31-00
2DA1 49VU ANTI ICE/PROBES/PHC/1 401PP 30-31-00
2DA2 122VU ANTI ICE/PROBES/2/PHC 206PP 30-31-00
2DA3 122VU ANTI ICE/PROBES/PHC/3 101PP 30-31-00
3DA1 49VU ANTI ICE/PROBES/PITOT/1 401XP-B 30-31-00
3DA2 122VU ANTI ICE/PROBES/2/PITOT 202XP-B 30-31-00
3DA3 122VU ANTI ICE/PROBES/3/PITOT 103XP-C 30-31-00
4DA1 49VU ANTI ICE/PROBES/1/AOA 801XP-C 30-31-00
4DA2 122VU ANTI ICE/PROBES/2/AOA 202XP-B 30-31-00
4DA3 122VU ANTI ICE/PROBES/3/AOA 103XP-C 30-31-00
5DA1 122VU ANTI ICE/PROBES/1/STATIC 101PP 30-31-00
5DA2 122VU ANTI ICE/PROBES/2/STATIC 206PP 30-31-00
5DA3 122VU ANTI ICE/PROBES/3/STATIC 103PP 34-11-00
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 11
Config-2 Nov 01/08
TAI
4. _____________________
Component Description
A. Static Probes
(Ref. Fig. 004)
Each of the three systems (CAPT (1), F/O (2), STBY (3)) comprises two
static probes which are linked to each ADR portion of the ADIRUs through
five ADMs.
The probe is protected from icing with a 28VDC heater circuit.
The static probes linked to ADIRU 1 and ADIRU 2 are set at 48.64 deg.
below the fuselage datum line (Z=0).
The static probes linked to ADIRU 3 are set at 29.5 deg. below the
fuselage datum line.
B. Pitot Probes
(Ref. Fig. 005)
Each system comprises one pitot probe (CAPT (1), F/O (2), STBY (3)) which
is linked to each ADR portion of the ADIRUs through one ADM.
The probe is protected from icing with a 115VAC - 400 Hz heater circuit.
The pitot probes 1 and 2 are set at 40.08 deg. below the fuselage datum
line (Z=0).
The pitot probe 3 is set at 59.56 deg. below the fuselage datum line
(Z=0).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 12
Config-2 Nov 01/08
TAI
ADIRS - Static Probe
Figure 004
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 13
Config-2 Nov 01/08
TAI
ADIRS - Pitot Probe
Figure 005
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 14
Config-2 Nov 01/08
TAI
C. Air Data Modules (ADM)
The term Air Data Module (ADM) refers to any remotely located LRU which
senses pressure information and transmits it to the ADIRU in ARINC 429
format.
The ADMs are remotely mounted near and above the level of the pitot and
static probes, this in order to make the ADM pneumatic plumbing self
draining when the aircraft is stationary on the ground.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 15
Config-2 Nov 01/08
TAI
Air Data Module
Figure 006
R
EFF :
201-203, 34-11-00
Page 16
Config-2 Nov 01/07
TAI
Air Data Module
Figure 006A
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-11-00
Page 17
Config-2 Nov 01/08
TAI
ADM - Block Diagram
Figure 007
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 18
Config-2 Nov 01/08
TAI
(c) EMI/lightning board
This board comprises the following devices:
- power supply: the ADM is supplied by the associated ADIRU with
+/- 13.5VAC. Power consumption is less than 200 mA on the
+13.5VDC input and less than 50 mA on the -13.5VDC input.
- EMI filters
- lightning protection
- input discretes filtering.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 19
Config-2 Nov 01/08
TAI
- computes the Applied Pressure based upon the pressure and
temperature signals
- filters the Computed Pressure
- formats the ARINC 429 word to be transmitted
- transmits the ARINC 429 Computed Pressure word
- formats and transmits two ADM discrete words (labels 270, 271)
- reads and debounces the MA/C discretes
- performs the BITE functions
- formats and transmits ADM software and equipment I.D. words
(labels 040,377).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 20
Config-2 Nov 01/08
TAI
(3) Discrete inputs
Table 1 gives the identification of the ADM discrete inputs:
--------------------------------------------
| ADM Pin | Identification |
--------------------------------------------
| K | SDI 1 (LSB) (2) |
| L | SDI 2 (MSB) (2) |
| M | Configuration code 1 (3) |
| N | Configuration code 2 (3) |
| P | Parity (1) |
| a | Memory Access/Calibration 1 |
| b | NVM reset discrete |
| c | Memory Access/Calibration 2 |
--------------------------------------------
NOTE : (3) The ADM transmits the measured pressure with a label
____
depending on the configuration code input discretes. The
configuration code definition is provided in table 3.
------------------------------------------------------------------------
|Input discrete SDI output |Input discrete SDI output |Installation|
| pin L Bit 10 state| pin K Bit 09 state| |
|----------------------------------------------------------------------|
| open 0 | open 0 | Invalid |
| open 0 | ground 1 | 1 |
| ground 1 | open 0 | 2 |
| ground 1 | ground 1 | 3 |
------------------------------------------------------------------------
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 21
Config-2 Nov 01/08
TAI
---------------------------------------------------------------------
| Installation function | Config. code 1 | Config. code 2 | Label |
| | Pin N | Pin M | |
|-------------------------------------------------------------------|
| Total pressure | open | open | 242 |
| Left static pressure | open | ground | 176 |
| Right static pressure | ground | open | 177 |
| Averaged static | ground | ground | 245 |
| pressure (uncorrected)| | | |
---------------------------------------------------------------------
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 22
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 242 |TOTAL |100-1400 |hPa | | 18 |29- |BNR | | |
| |PRESSURE |+/- 0.25 | | | |31 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 176 |LEFT STAT |100-1100 |hPa | | 18 |29- |BNR | | |
| |PRESSURE |+/- 0.25 | | | |31 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 177 |RIGHT STAT|100-1100 |hPa | | 18 |29- |BNR | | |
| |PRESSURE |+/- 0.25 | | | |31 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 245 |AVERAGED |100-1100 |hPa | | 18 |29- |BNR | | |
| |STATIC |+/- 0.25 | | | |31 | | | |
| |PRESSURE | | | | | | | | |
| |(UNCORRTD)| | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 270 |DISCRETE |Table 5 | | | |460-|BCD | | |
| |WORD 1 | | | | |500 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 271 |DISCRETE |Table 6 | | | |460-|BCD | | |
| |WORD 2 | | | | |500 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 377 |EQUIPMENT |Table 7 | | | |460-|BCD | | |
| |IDENT | | | | |500 | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 040 |SOFTWARE |Table 8 | | | |460-|BCD | | |
| |IDENT | | | | |500 | | | |
-------------------------------------------------------------------------------
Table 4 = Digital Outputs
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 23
Config-2 Nov 01/08
TAI
---------------------------------------------------------------------
| Bit |Data |
| Position | |
|-------------------------------------------------------------------|
| 1-8 |Octal Label 270 |
| 9-10 |SDI |
| 11-12 |Logic 0 |
| 13-16 |LSD device revision number (currently 4H) |
| 17-20 |MSD device revision number (currently 0H) |
| 21-24 |LS device revision letter (currently CH) |
| 25-28 |MS device revision letter (currently AH) |
| 29 |Logic 0 |
| 30-31 |Logic 0. Set the SSM to Normal Operation for a discrete |
| |maintenance word |
| 32 |Odd parity |
---------------------------------------------------------------------
---------------------------------------------------------------------
| Bit |Data |
| Position | |
|-------------------------------------------------------------------|
| 1-8 |Octal Label 271 |
| 9-10 |SDI |
| 11-13 |Logic 0 |
| 14 |ADM LRU Status |
| 15 |Pin configuration status |
| 16 |Environment status |
| 17-24 |Current fault byte matrix |
| 25-28 |Word counter |
| 29 |Logic 0 |
| 30-31 |Logic 0. Set the SSM to Normal Operation for a discrete |
| |maintenance word |
| 32 |Odd parity |
---------------------------------------------------------------------
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 24
Config-2 Nov 01/08
TAI
---------------------------------------------------------------------
| Bit |Data |
| Position | |
|-------------------------------------------------------------------|
| 1-8 |Octal Label 377 |
| 9-10 |SDI |
| 11-14 |LSD equipment identification (8H) |
| 15-18 |MSD equipment identification (3H) |
| 19-29 |Logic 0 |
| 30-31 |Logic 0. Set the SSM to Normal Operation for a discrete |
| |maintenance word |
| 32 |Odd parity |
---------------------------------------------------------------------
---------------------------------------------------------------------
| Bit |Data |
| Position | |
|-------------------------------------------------------------------|
| 1-8 |Octal Label 040 |
| 9-10 |SDI |
| 11-12 |Logic 0 |
| 13-16 |LSD software revision number |
| 17-20 |MSD software revision number |
| 21-24 |LSD manufacturer ident number (1H) |
| 25-28 |MSD manufacturer ident number (0H) |
| 29 |Logic 0 |
| 30-31 |Logic 0. Set the SSM to Normal Operation for a discrete |
| |maintenance word |
| 32 |Odd parity |
---------------------------------------------------------------------
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 25
Config-2 Nov 01/08
TAI
R **ON A/C 201-203,
R
EFF :
201-203, 34-11-00
Page 26
Config-2 Nov 01/07
TAI
ADIRS - TAT Sensor
Figure 008
R
EFF :
201-203, 34-11-00
Page 27
Config-2 Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
The aircraft is equipped with two total air temperature sensors with two
sensing elements each. The sensing elements of the sensor have variable
resistances. Each sensor is equipped with an air suction system, supplied
with compressed air, providing improved measurement accuracy, mainly on
ground. The principle of this system consists in pulling ambient air by
and through the sensing element.
The TAT sensor 1 is linked to the ADR portion of ADIRUs 1 and 3, the TAT
sensor 2 is linked to the ADR portion of ADIRU 2.
The TAT sensors are set at 2.33 m from the nose and at 0.60 m of the
aircraft axis below the fuselage. The TAT sensor 1 is located on the left
side and the TAT sensor 2 on the right side.
The air flow enters the scoop of the sensor, goes through a calibrated
choke and flows over the hermetically sealed platinum resistance sensing
element where the temperature is measured. The speed of the flow over the
element is controlled by the choke in the element tube.
The ADR portion is designed to operate with 500 ohms (at 0 deg. C)
temperature sensor unit corresponding to the basic Callender - Van Dusen
equation. To improve the accuracy of the sensor, a network of precision
resistors is used. This technique is identified by the term Precision
Calibration Interchangeability (PCI).
These sensors are heated with 115VAC through the probe heating system.
The heating element must not be energized on the ground.
The heating element is implanted in the scoop and strut and keeps the
probe free of ice under the most severe icing conditions.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-11-00
Page 28
Config-2 Nov 01/08
TAI
ADIRS - TAT Sensor
Figure 008A
R
EFF :
401-404,
211-212, 215-215, 218-299, 301-399, 34-11-00
Page 29
Config-2 Nov 01/08
TAI
R ADIRS - TAT Sensor
R Figure 008B
R
EFF :
405-499, 34-11-00
Page 30
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
The aircraft is equipped with three AOA sensors. Two are located on the
left side and one on the right side of the fuselage. Each of these AOA
sensors is respectively linked to each ADR portion of the ADIRUs. The AOA
sensors 1 and 3 are set at 6.08 deg. and 31 deg. below the fuselage datum
line (Z = 0) on the left side. The AOA sensor 2 is set at 6.08 deg. below
the fuselage datum line (Z = 0) on the right side.
The angle of attack sensor is of the wind vane type. Its sensing element
is a small wing which is positioned in the direction of airflow. The
small wing is mechanically linked to a free turn-shaft which drives the
devices transmitting the local angle of attack signal. These transmitting
devices are made up of resolver transformers which convert the angular
information into proportional electrical information (angle sine and
cosine). The resolvers are supplied with a 26VAC signal. The same signal
is also received by the ADIRU as a reference for the decoding of AOA
values. Each sensor has three resolver outputs but only two are wired to
the ADIRU.
The whole mechanism is stabilized around the rotation axis. In addition,
a damping device enables a satisfactory dynamic response to be obtained
(filtering of mechanical oscillation).
A self-regulated heating element (CTP resistances: positive coefficient
of temperature) inserted into the vane eliminates or avoids icing. It is
supplied with 115VAC through the PHC (Ref. 30-31-00).
The AOA sensor is equipped with a self-test device which is activated by
a 28VDC signal, from the ADR (through the relay 21FP1, 21FP2 or 21FP3)
when the test is entered via the maintenance system (CFDIU and MCDU). The
self-test positions the vane at a resolver angle of +15 deg. (left side
test) or -15 deg. (right side test).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 31
Config-2 Nov 01/08
TAI
ADIRS - AOA Sensor
Figure 009
R
EFF :
201-203, 301-301, 34-11-00
Page 32
Config-2 Feb 01/08
TAI
ADIRS - AOA Sensor
Figure 009A
R
EFF :
401-499,
211-212, 215-215, 218-299, 302-399, 34-11-00
Page 33
Config-2 Nov 01/08
TAI
The mounting and wing of AOA resolvers determine the relationship between
the measured resolver angle and indicated angle of attack. This
relationship for each resolver input is as follows:
(Ref. Fig. 010)
------------------------------------------------------------------------
| | Indicated AOA: | +85 | +60 | +25 | 0 | -35 |
| AOA 1 and AOA 3 |----------------------------------------------------|
| in degrees | Resolver angle: | -60 | -35 | 0 | +25 | +60 |
------------------------------------------------------------------------
| | Indicated AOA: | +85 | +60 | +25 | 0 | -35 |
| AOA 2 |----------------------------------------------------|
| in degrees | Resolver angle: | +60 | +35 | 0 | -25 | -60 |
------------------------------------------------------------------------
The ADRs receive the same 26VAC, 400 Hz reference as the AOA resolvers.
This reference is common to both AOA resolver inputs 1 and 2.
Characteristics:
Excitation : 26 V 400 Hz
Phase shift : 18 deg. to 30 deg.
Resolver transformer
ratio RT : 0.4029 to 0.4629
Rotor impedance : Zro = 125 + j175 ohms +/-20%
Stator impedance : Zso = 115 + j90 ohms +/-30%
Range : +/-60 deg.
Scale factor : 1 deg. resolver/1 deg. local AOA
The accuracy of the AOA sensor, at 100 knots, is +/-0.3 deg.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 34
Config-2 Nov 01/08
TAI
AOA Sensor - Installation Definition
Figure 010
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 35
Config-2 Nov 01/08
TAI
INTENTIONALLY BLANK
R
34-11-00
Page 36
Config-2 Aug 01/08
TAI
R **ON A/C 201-203, 301-399,
F. Selector Switches
(Ref. Fig. 011)
The two selector switches AIR DATA and ATT HDG are rotary selector
switches with 3 positions: CAPT/3, NORM and F/O/3.
These selector switches are used for the functions listed below (Ref. the
respective section for more details):
- AIR DATA SEL SW (15FP):
34-14-00 Selection of the ADR used by the IR3
34-52-00 ATC mode S
31-68-00 DMC
22-85-00 FMGC
- ATT HDG SEL SW (13FP):
34-11-00 Power Supply
34-14-00 Selection of the ADR used by the IR3
34-41-00 Weather Radar
31-68-00 DMC
22-85-00 FMGC.
R
EFF :
201-203, 301-399, 34-11-00
Page 37
Config-2 Nov 01/07
TAI
ADIRS Switching
Figure 011
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-11-00
Page 38
Config-2 Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-299, 401-499,
F. Selector Switches
(Ref. Fig. 011)
The two selector switches AIR DATA and ATT HDG are rotary selector
switches with 3 positions: CAPT/3, NORM and F/O/3.
These selector switches are used for the functions listed below (Ref. the
respective section for more details):
- AIR DATA SEL SW (15FP):
34-14-00 Selection of the ADR used by the IR3
34-52-00 ATC mode S
31-68-00 DMC
22-85-00 FMGC
- ATT HDG SEL SW (13FP):
34-11-00 Power Supply
34-14-00 Selection of the ADR used by the IR3
34-41-00 Weather Radar
31-68-00 DMC
22-85-00 FMGC.
R
EFF :
211-212, 215-215, 218-299, 401-499, 34-11-00
Page 39
Config-2 Nov 01/08
TAI
SENSORS, POWER SUPPLY AND SWITCHING - ADJUSTMENT/TEST
_____________________________________________________
TASK 34-11-00-720-001
CAUTION : OBEY THESE PRECAUTIONS WHEN YOU DO THE TEST TO PREVENT DAMAGE TO
_______
INSTRUMENTS:
- THE PRESSURES SET MUST NOT BE MORE THAN 1050 hPa (31 in Hg) OR LESS
THAN 115 hPa (3.39 in Hg)
- CHANGES IN STATIC PRESSURE MUST NOT BE MORE THAN 6000 FEET/MINUTE
- DO NOT SUDDENLY OPEN LINES TO AMBIENT AIR WHILE THE PRESSURE
GENERATOR IS CONNECTED.
CAUTION : THE TOTAL PRESSURE IN THE PITOT SYSTEM MUST NEVER BE LESS THAN THE
_______
STATIC PRESSURE. THE DIFFERENCE BETWEEN THE PITOT AND THE STATIC
PRESSURE CIRCUITS MUST NEVER BE MORE THAN 368 hPa (10.86 in Hg).
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-11-00
Page 501
Aug 01/08
TAI
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-00-010-050
(1) Put the access platform in position and open the access door 824.
Subtask 34-11-00-860-056
(2) Do the EIS start procedure (PFDs only) (Ref. TASK 31-60-00-860-001).
(4) On the center pedestral, on the SWITCHING panel 8VU, make sure that
the AIR DATA selector switch is at NORM.
EFF :
ALL 34-11-00
Page 502
Feb 01/02
TAI
Subtask 34-11-00-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
Subtask 34-11-00-480-050
(1) Remove the slip on covers from the static probes and the pitot
probes.
R (2) Connect the static port of the GENERATOR - GROUND PRESSURE MINI. 100
R MB (1.45 PSI) TO to the static and/or total probes on which you do
the test :
EFF :
ALL 34-11-00
Page 503
Aug 01/08
TAI
- 9DA3 ZONE 125 STA 5500 for the total pressure ADM (19FP3)
CAUTION : WHEN YOU SEAL THE DRAIN HOLE IN THE PITOT PROBE, DO NOT
_______
SEAL THE HOLE DIRECTLY WITH THE COLORED ADHESIVE TAPE.
ALWAYS PUT A PIECE OF PLASTIC ON THE HOLE FIRST AND USE THE
COLORED ADHESIVE TAPE TO ATTACH THE PLASTIC.
IF YOU SEAL THE DRAIN HOLE DIRECTLY WITH THE ADHESIVE TAPE,
THERE IS A RISK THAT SOME OF THE ADHESIVE WILL STAY ON THE
HOLE AND COLLECT PARTICLES. THIS CAN SUBSEQUENTLY CAUSE
BLOCKAGE OF THE HOLE AND THUS INCORRECT OPERATION OF THE
PROBE.
(a) Seal the drain holes of the pitot probes with a piece of plastic
and colored adhesive tape of very bright color.
(b) Seal the opposite static probe of the standby ADM with the
ADAPTER COVER-STATIC PORT (98D34003500103).
4. Procedure
_________
Subtask 34-11-00-720-050
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
EFF :
ALL 34-11-00
Page 504
Aug 01/08
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
is the same as these - Label 242 (ADM 19FP2)
indicated in the table - Label 176 (ADM 19FP7)
below. - Label 177 (ADM 19FP6)
ADIRU 3
- Label 242 (ADM 19FP3)
- Label 245 (ADM 19FP8)
2. On the ground pressure generator, The rate of descent must not be more
slowly decrease the pressure. than 6000 ft/mn.
-----------------------------------------------------
| PT | Altitude | Pressure value from |
| | (approx.) | the ADM |
|----------|--------------|-------------------------|
R | 836 hPa | 5000 ft | 836 +/- 0.3 hPa |
|----------|--------------|-------------------------|
R | 690 hPa | 10000 ft | 690 +/- 0.3 hPa |
|----------|--------------|-------------------------|
R | 460 hPa | 20000 ft | 460 +/- 0.3 hPa |
|----------|--------------|-------------------------|
R | 300 hPa | 30000 ft | 300 +/- 0.3 hPa |
|----------|--------------|-------------------------|
R | 196 hPa | 39000 ft | 196 +/- 0.3 hPa |
-----------------------------------------------------
5. Close-up
________
Subtask 34-11-00-080-050
(1) Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
(2) Make sure that there is no remaining piece of plastic and/or adhesive
tape on the pitot probes. Make sure that the pitot drain holes are
serviceable.
EFF :
ALL 34-11-00
Page 505
Aug 01/08
TAI
Subtask 34-11-00-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
Subtask 34-11-00-410-050
C. Close Access
Subtask 34-11-00-860-051
(1) Install the slip on covers on the static probes and on the pitot
probes.
EFF :
ALL 34-11-00
Page 506
Feb 01/02
TAI
TASK 34-11-00-710-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-00-010-051
A. Get Access
(1) Put the access platform in position in zone 126 at the access door
822.
EFF :
ALL 34-11-00
Page 507
Aug 01/98
R
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-299, 301-399,
R 401-404,
Subtask 34-11-00-860-052
NOTE : This test is for the system 1. For the systems 2 and 3, use
____
the indications between the parentheses.
R Subtask 34-11-00-860-052-A
R NOTE : This test is for the system 1. For the systems 2 and 3, use
____
R the indications between the parentheses.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-11-00
Page 508
Nov 01/08
TAI
R **ON A/C ALL
Subtask 34-11-00-865-053
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-11-00
Page 509
Nov 01/08
TAI
**ON A/C ALL
4. Procedure
_________
Subtask 34-11-00-710-050
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the OFF/NAV/ATT selector - the CAPT and F/O PFDs show the speed
switch related to the IR1, IR2 and altitude indications.
and IR3 to NAV.
- open the circuit breaker 5FP1 - on the ADIRS CDU, the FAULT legend of
(5FP2). the ADR1 (ADR2) pushbutton switch
comes on.
- on the CAPT (F/O) PFD, the SPD and
ALT warning flags come into view.
- on the lower ECAM DU, on the status
page, in the INOP SYST section, the
ADR1 indication comes into view.
- set the AIR DATA selector - on the CAPT (F/O) PFD, the speed and
switch to CAPT/3 (F/O/3). altitude indications come into view.
- open the circuit breaker 5PF3. - on the CAPT (F/O) PFD, the SPD and
ALT warning flags come into view.
- on the lower ECAM display unit, in
the INOP SYST section, the ADR 1 + 3
(ADR 2 + 3) indication comes into
view.
EFF :
ALL 34-11-00
Page 510
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- on the ADIRS CDU, the FAULT legend of
the ADR3 pushbutton switch comes on.
- close the circuit breaker 5FP1 - on the lower ECAM display unit, in
(5FP2). the INOP SYST section, the ADR3
indication comes into view.
- on the ADIRS CDU, the FAULT legend of
the ADR1 (ADR2) pushbutton switch
goes off.
- set the AIR DATA selector - on the CAPT (F/O) PFD, the speed and
switch to NORM. altitude indications come into view.
- close the circuit breaker 5FP3. - on the lower ECAM display unit, in
the INOP SYST section, the ADR3
indication goes out of view.
- on the ADIRS CDU, the FAULT legend of
the ADR3 pushbutton switch goes off.
8. Refer to the indications in the You must get the same results on the
parentheses specified in the F/O side.
para. 1 to 5 and do the ADR2
test.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-11-00
Page 511
Nov 01/08
TAI
R **ON A/C 405-499,
R Subtask 34-11-00-710-050-A
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Set the OFF/NAV/ATT selector - The CAPT and F/O PFDs show the speed
R switch related to the IR1, IR2 and altitude indications.
R and IR3 to NAV.
R - Open the circuit breaker 5FP1 - On the ADIRS MSU, the FAULT legend of
R (5FP2). the ADR1 (ADR2) pushbutton switch
R comes on.
R - On the CAPT (F/O) PFD, the SPD and
R ALT warning flags come into view.
R - On the lower ECAM DU, on the status
R page, in the INOP SYST section, the
R ADR1 indication comes into view.
R - Set the AIR DATA selector - On the CAPT (F/O) PFD, the speed and
R switch to CAPT/3 (F/O/3). altitude indications come into view.
R - Open the circuit breaker 5PF3. - On the CAPT (F/O) PFD, the SPD and
R ALT warning flags come into view.
R - On the lower ECAM display unit, in
R the INOP SYST section, the ADR 1 + 3
R (ADR 2 + 3) indication comes into
R view.
R - On the ADIRS MSU, the FAULT legend of
R the ADR3 pushbutton switch comes on.
R
EFF :
405-499, 34-11-00
Page 512
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - Close the circuit breaker 5FP1 - On the lower ECAM display unit, in
R (5FP2). the INOP SYST section, the ADR3
R indication comes into view.
R - On the ADIRS MSU, the FAULT legend of
R the ADR1 (ADR2) pushbutton switch
R goes off.
R - Set the AIR DATA selector - On the CAPT (F/O) PFD, the speed and
R switch to NORM. altitude indications come into view.
R - Close the circuit breaker 5FP3. - On the lower ECAM display unit, in
R the INOP SYST section, the ADR3
R indication goes out of view.
R - On the ADIRS MSU, the FAULT legend of
R the ADR3 pushbutton switch goes off.
R 8. Refer to the indications in the You must get the same results on the
R parentheses specified in the F/O side.
R para. 1 to 5 and do the ADR2
R test.
5. Close-up
________
Subtask 34-11-00-860-053
(2) On the ADIRS CDU, set the 3 OFF/NAV/ATT selector switches to OFF.
EFF :
ALL 34-11-00
Page 513
Nov 01/08
TAI
R **ON A/C 405-499,
R Subtask 34-11-00-860-053-A
R (2) On the ADIRS MSU, set the three OFF/NAV/ATT selector switches to OFF.
Subtask 34-11-00-410-051
B. Close Access
(1) Install the protective cover of the 105VU with two bolts.
EFF :
ALL 34-11-00
Page 514
Nov 01/08
TAI
TASK 34-11-00-710-002
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-00-010-052
A. Get Access
(1) Put the access platform in position in zone 126 at the access door
822.
EFF :
ALL 34-11-00
Page 515
Nov 01/08
R
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-299, 301-399,
R 401-404,
Subtask 34-11-00-860-054
NOTE : This test is for the system 1. For the systems 2 and 3, use
____
the indications between the parentheses.
R Subtask 34-11-00-860-054-A
R NOTE : This test is for the system 1. For the systems 2 and 3, use
____
R the indications between the parentheses.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-11-00
Page 516
Nov 01/08
TAI
R **ON A/C ALL
Subtask 34-11-00-865-054
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-11-00
Page 517
Nov 01/08
TAI
**ON A/C ALL
4. Procedure
_________
Subtask 34-11-00-710-051
NOTE : Ignore all warnings / indications which are not related to this
____
test.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
EFF :
ALL 34-11-00
Page 518
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
4. On the ADIRS CDU: - on the ADIRS CDU, the related FAULT
- set the OFF/NAV/ATT selector legend continues to flash then goes
switch related to the IR 1 (IR off after a short time,
2) to OFF. - on the upper ECAM display unit, the
IR1 FAULT (IR2 FAULT) warning goes
out of view.
- on the panels 130VU and 131VU the
MASTER CAUT lights go off,
- on the ADIRS CDU, the related ALIGN
legend goes off.
5. Do the IR 2 test as specified in You must get the same results on the
para. 1 to 4. F/O side.
- open the circuit breaker 4FP1 - on the ADIRS CDU, the ON BAT light
(4FP2). comes on.
- in the nose gear wheel:
* after a time delay of 15 s approx
you can hear the horn.
* on the door 121AL, on the panel
108VU, the ADIRU & AVNCS VENT light
comes on.
- on the CAPT (F/O) PFD and ND, the
attitude indications are shown.
- close the circuit breaker 4FP1 - on the ADIRS CDU, the ON BAT light
(4FP2). goes off.
- the horn stops.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-11-00
Page 519
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
10. Do the IR 2 test as specified in You must get the same results on the
para. 6 to 8. F/O side.
- set the ATT HDG selector - on the CAPT PFD and ND the attitude
switch to CAPT/3. and heading indications from the IR 1
are not shown.
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-11-00
Page 520
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
16. On the ADIRS CDU:
- open the circuit breaker 4FP3. - on the ADIRS CDU, the ON BAT light
comes on.
- in the nose gear well:
* after a time delay of 15 s approx
you can hear the horn.
* on the door 121AL, on the panel
108VU, the ADIRU & AVNCS VENT light
comes on.
- on the CAPT (F/O) PFD , the attitude
indications stay in view.
18. On the panel 121VU: - on the ADIRS CDU, the ON BAT light
- close the circuit breaker goes off.
4FP3. - the horn stops.
- set the 3 OFF/NAV/ATT selector - The related ALIGN legend goes off.
switches to OFF.
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-11-00
Page 521
Nov 01/08
TAI
R **ON A/C 405-499,
R Subtask 34-11-00-710-051-A
R NOTE : Ignore all warnings / indications which are not related to this
____
R test.
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R 5. Do the IR2 test as specified in You must get the same results on the
R para. 1 to 4. F/O side.
EFF :
405-499, 34-11-00
Page 522
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R 6. On the ADIRS MSU: On the ADIRS MSU:
R - Set the OFF/NAV/ATT selector - The ON BAT light comes on during 5 s.
R switch related to the IR1 (IR2)
R to NAV.
R - Open the circuit breaker 4FP1 - On the ADIRS MSU, the ON BAT light
R (4FP2). comes on.
R - In the nose gear wheel:
R * After a time delay of 15 s approx
R you can hear the horn.
R * On the door 121AL, on the external
R power panel 108VU, the ADIRU & AVNCS
R VENT light comes on.
R - On the CAPT (F/O) PFD and ND, the
R attitude indications are shown.
R - Close the circuit breaker 4FP1 - On the ADIRS MSU, the ON BAT light
R (4FP2). goes off.
R - The horn stops.
R 10. Do the IR2 test as specified in You must get the same results on the
R para. 6 to 8. F/O side.
R - Set the ATT HDG selector - On the CAPT PFD and ND the attitude
R switch to CAPT/3. and heading indications from the IR1
R are not shown.
EFF :
405-499, 34-11-00
Page 523
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - Set the OFF/NAV/ATT selector * The ON BAT light is on.
R switch related to the IR3 to * The related FAULT legend flashes.
R NAV. - On the upper ECAM display unit, the
R IR3 FAULT warning comes into view.
R - On the F/O and CAPT glareshield
R panels 130VU and 131VU, the MASTER
R CAUT lights are on.
R - You can hear the single chime.
R - After a time delay of 15 s, you can
R hear the horn.
R - Open the circuit breaker 4FP3. - On the ADIRS MSU, the ON BAT light
R comes on.
R - In the nose gear well:
R * After a time delay of 15 s approx
R you can hear the horn.
R * On the door 121AL, on the external
R power panel 108VU, the ADIRU & AVNCS
R VENT light comes on.
R - On the CAPT (F/O) PFD, the attitude
R indications stay in view.
EFF :
405-499, 34-11-00
Page 524
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R 18. On the rear C/B panel 121VU: - On the ADIRS MSU, the ON BAT light
R - Close the circuit breaker goes off.
R 4FP3. - The horn stops.
5. Close-up
________
Subtask 34-11-00-860-055
Subtask 34-11-00-410-052
B. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-11-00
Page 525
Nov 01/08
TAI
PROBE - PITOT (9DA1,9DA2,9DA3) - REMOVAL/INSTALLATION
_____________________________________________________
TASK 34-11-15-000-001
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______
OPENED, SAFETIED AND TAGGED.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-11-15
Page 401
Nov 01/00
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-11-15-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
FOR 9DA1
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU ANTI ICE/PROBES/PHC/1 2DA1 D03
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
R 122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
R 122VU ANTI ICE/PROBES/1/TAT 1DA1 Z12
FOR 9DA2
R 122VU ANTI ICE/PROBES/2/TAT 1DA2 Y15
R 122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/AOA 4DA2 Y13
122VU ANTI ICE/PROBES/2/PHC 2DA2 Y12
R 122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
FOR 9DA3
122VU ANTI ICE/PROBES/PHC/3 2DA3 Y16
R 122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/AOA 4DA3 Z15
R 122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
Subtask 34-11-15-010-050
B. Get Access
(1) Put the access platform in position at zone 125 to get access to
pitot probes 1 and 3 and at zone 126 to get access to pitot probe 2.
EFF :
ALL 34-11-15
Page 402
May 01/00
TAI
4. Procedure
_________
Subtask 34-11-15-020-050
(5) Loosen the two nuts (3) from the inner side of the aircraft.
NOTE : A second person is necessary to hold the pitot probe from the
____
outer side of the aircraft.
(6) Carefully remove the pitot probe (5) from the fuselage.
EFF :
ALL 34-11-15
Page 403
Nov 01/00
TAI
Pitot Probe
Figure 401/TASK 34-11-15-991-001
R
EFF :
001-050, 053-099, 34-11-15
Page 404
Nov 01/00
TAI
R Pitot Probe
R Figure 401A/TASK 34-11-15-991-001-A
EFF :
ALL 34-11-15
Page 405
Nov 01/01
TAI
TASK 34-11-15-400-001
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______
OPENED, SAFETIED AND TAGGED.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
EFF :
ALL 34-11-15
Page 406
Feb 01/07
R
TAI
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-15-860-050
(1) Make sure that the access platform is in position at zone 125 to get
access to pitot probes 1 and 3 and at zone 126 to get access to pitot
probe 2.
R (2) Make sure that the access door are open (Ref. TASK 52-41-00-010-002):
FOR 9DA1, 9DA3
812
FOR 9DA2
822
EFF :
ALL 34-11-15
Page 407
Aug 01/07
TAI
Subtask 34-11-15-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
FOR 9DA1
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU ANTI ICE/PROBES/PHC/1 2DA1 D03
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
122VU ANTI ICE/PROBES/1/TAT 1DA1 Z12
FOR 9DA2
122VU ANTI ICE/PROBES/2/TAT 1DA2 Y15
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/AOA 4DA2 Y13
122VU ANTI ICE/PROBES/2/PHC 2DA2 Y12
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
FOR 9DA3
122VU ANTI ICE/PROBES/PHC/3 2DA3 Y16
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/AOA 4DA3 Z15
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
4. Procedure
_________
EFF :
ALL 34-11-15
Page 408
Nov 01/00
TAI
**ON A/C ALL
Subtask 34-11-15-420-050
NOTE : A second person is necessary to hold the pitot probe from the
____
outer side of the aircraft.
NOTE : You must turn the sensor element (6) to the front of the
____
aircraft.
(5) Tighten the two nuts (3) from the inner side of the fuselage.
(6) Remove the blanking cap from the electrical connector (2).
(7) Make sure that the electrical connectors are clean and in the correct
condition.
(8) Connect the electrical connector (2) to the pitot probe (5).
(9) Remove the blanking plug from the quick-disconnect coupling (1).
(10) Connect the quick-disconnect coupling (1) to the pitot probe (5).
(Ref. Fig. 402/TASK 34-11-15-991-003)
(11) Make sure that you can see the blue ring on the quick-disconnect
coupling.
(13) Check the bonding contact resistance between the pitot probe (5) and
the fuselage structure (Ref. TASK 20-28-00-720-005).
EFF :
ALL 34-11-15
Page 409
May 01/08
TAI
R Illustration of the Quick-Disconnect coupling
R Figure 402/TASK 34-11-15-991-003
EFF :
ALL 34-11-15
Page 410
Feb 01/07
TAI
Subtask 34-11-15-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5SQ1
FOR 9DA1
1DA1, 2DA1, 3DA1, 4DA1, 5DA1
FOR 9DA2
1DA2, 2DA2, 3DA2, 4DA2, 5DA2
FOR 9DA3
2DA3, 3DA3, 4DA3, 5DA3
Subtask 34-11-15-710-050
5. Close-up
________
Subtask 34-11-15-410-050
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
(2) Make sure that the drain holes on the pitot probes are not blocked by
unwanted materials. (Ref. TASK 34-11-15-200-001)
EFF :
ALL 34-11-15
Page 411
Aug 01/07
TAI
PROBE - PITOT (9DA1,9DA2,9DA3) - ADJUSTMENT/TEST
________________________________________________
TASK 34-11-15-710-001
Test of the Pitot Probe (9DA1, 9DA2, 9DA3) without the CFDS
CAUTION : REMOVE THE PROTECTIVE COVERS FROM THE PROBES BEFORE YOU DO THE TEST.
_______
CAUTION : DO NOT CONTINUE THE TEST FOR MORE THAN ONE MINUTE TO PREVENT DAMAGE
_______
TO THE PROBES.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-15-860-051
EFF :
ALL 34-11-15
Page 501
Feb 01/98
TAI
(3) Do the ADIRS start procedure for the related system:
For 9DA1
ADIRU1
For 9DA2
ADIRU2
For 9DA3
ADIRU3
(Ref. TASK 34-10-00-860-002).
Subtask 34-11-15-865-056
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 9DA1
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
R FOR 9DA2
R 122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
R FOR 9DA3
R 122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
4. Procedure
_________
Subtask 34-11-15-710-051
A. Heating Test
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- on the panel 49VU, open the - on the panels 131VU and 132VU, the
circuit breaker 3DA1 MASTER CAUT lights come on
- you can hear the single chime
- on the upper ECAM display unit the
ANTI ICE CAPT PITOT indication comes
into view.
EFF :
ALL 34-11-15
Page 502
May 01/00
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- or on the panel 122VU, open the - on the panels 131VU and 132VU, the
circuit breaker 3DA2 MASTER CAUT lights come on
- you can hear the single chime
- on the upper ECAM display unit the
ANTI ICE F/O PITOT indication comes
into view.
- or on the panel 122VU, open the - on the panels 131VU and 132VU, the
circuit breaker 3DA3. MASTER CAUT lights come on
- you can hear the single chime
- on the upper ECAM display unit the
ANTI ICE STBY PITOT indication comes
into view.
3. Close the circuit breaker(s) that - on the panels 131VU and 132VU, the
you opened before. MASTER CAUT lights go off.
- on the upper ECAM display unit, the
indication given above goes out of
view.
- on the upper ECAM display unit, the
MEMO page comes into view.
5. Close-up
________
Subtask 34-11-15-860-052
(1) On the center pedestal, on the ECAM control panel, set the UPPER
DISPLAY and LOWER DISPLAY potentiometers to OFF.
EFF :
ALL 34-11-15
Page 503
Feb 01/99
R
TAI
PROBE - PITOT (9DA1,9DA2,9DA3) - INSPECTION/CHECK
_________________________________________________
TASK 34-11-15-200-001
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-11-15
Page 601
Feb 01/08
TAI
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-15-865-053
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 9DA1
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
FOR 9DA2
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
FOR 9DA3
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
Subtask 34-11-15-860-054
(1) Put the access platform in position in Zone 125 to get access to the
pitot probes 1 and 3 and in Zone 126 to get access to the pitot probe
2.
4. Procedure
_________
EFF :
ALL 34-11-15
Page 602
Nov 01/08
TAI
Pitot Probe Tip Configuration
Figure 601/TASK 34-11-15-991-002
R
EFF :
402-499,
001-050, 053-099, 229-299, 310-399, 34-11-15
Page 603
Nov 01/05
TAI
R **ON A/C 053-099, 201-203, 211-212, 215-215, 218-228, 301-309, 401-401,
Subtask 34-11-15-220-050
(a) Color
During the ageing of the probe, the color of the tube becomes
brownish and/or blackish.
This coloration has no effect on the operation of the probe.
NOTE : The compressed air line must have an oil trap to make sure
____
that no oil gets into the pitot probe.
(c) Make sure that the drain holes are not blocked.
If not, do the flushing of the Total pressure lines:
- for pitot 1 and/or 2 (Ref. TASK 34-10-00-170-001)
- for pitot 3 (Ref. TASK 34-10-00-170-003) (only standby total
pressure line part).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-401,
34-11-15
Page 604
Nov 01/08
TAI
Pitot Probe Tip Configuration
Figure 601A/TASK 34-11-15-991-002-A
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-228, 301-309, 401-401,
34-11-15
Page 605
Nov 01/08
TAI
(d) If the inspection/check is not satisfactory, you must reject the
pitot probe (Ref. TASK 34-11-15-000-001) and (Ref. TASK 34-11-15-
400-001).
If the protective cover melted on the probe and the other
criteria are correct, you must reject the pitot probe.
Subtask 34-11-15-220-050-B
(a) Color
During the ageing of the probe, the color of the tube becomes
brownish and/or blackish.
This coloration has no effect on the operation of the probe.
NOTE : The compressed air line must have an oil trap to make sure
____
that no oil gets into the pitot probe.
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-304, 306-309, 401-401,
34-11-15
Page 606
Feb 01/09
TAI
(c) Make sure that the drain holes are not blocked.
If not, do the flushing of the Total pressure lines:
- for pitot 1 and/or 2 (Ref. TASK 34-10-00-170-001)
- for pitot 3 (Ref. TASK 34-22-25-170-001) (only standby total
pressure line part).
Subtask 34-11-15-220-050-A
(a) Color
During the ageing of the probe, the color of the tube becomes
brownish and/or blackish.
This coloration has no effect on the operation of the probe.
EFF : 001-050, 201-203, 211-212, 215-215,
218-228, 301-304, 306-309, 401-401,
34-11-15
Page 607
Feb 01/09
TAI
NOTE : The compressed air line must have an oil trap to make sure
____
that no oil gets into the pitot probe.
(c) Make sure that the drain holes are not blocked.
If not, do the flushing of the Total pressure lines:
- for pitot 1 and/or 2 (Ref. TASK 34-10-00-170-001)
- for pitot 3 (Ref. TASK 34-10-00-170-003) (only standby total
pressure line part).
Subtask 34-11-15-220-050-C
(a) Color
During the ageing of the probe, the color of the tube becomes
brownish and/or blackish.
This coloration has no effect on the operation of the probe.
EFF : 001-050, 201-203, 211-212, 215-215,
218-299, 301-304, 306-399, 401-499,
34-11-15
Page 608
Feb 01/09
TAI
If not, remove the pitot probe (Ref. TASK 34-11-15-000-001), blow
compressed air into the pitot tube at the pneumatic connector and
out of the tube entrance.
Maximum air pressure: 57 psi (3.9300 bar).
NOTE : The compressed air line must have an oil trap to make sure
____
that no oil gets into the pitot probe.
(c) Make sure that the drain holes are not blocked.
If not, do the flushing of the Total pressure lines:
- for pitot 1 and/or 2 (Ref. TASK 34-10-00-170-001)
- for pitot 3 (Ref. TASK 34-22-25-170-001) (only standby total
pressure line part).
5. Close-up
________
Subtask 34-11-15-860-053
(2) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-11-15
Page 609
Feb 01/09
TAI
Subtask 34-11-15-865-054
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
FOR 9DA1
3DA1
FOR 9DA2
3DA2
FOR 9DA3
3DA3
EFF :
ALL 34-11-15
Page 610
Feb 01/09
TAI
PROBE - STATIC (7DA1,7DA2,7DA3,8DA1,8DA2,8DA3) - REMOVAL/INSTALLATION
_____________________________________________________________________
TASK 34-11-16-000-001
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______
OPENED, SAFETIED AND TAGGED.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-11-16
Page 401
Nov 01/08
TAI
R **ON A/C ALL
3. __________
Job Set-up
Subtask 34-11-16-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
FOR 7DA1, 8DA1
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU ANTI ICE/PROBES/PHC/1 2DA1 D03
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
122VU ANTI ICE/PROBES/1/TAT 1DA1 Z12
FOR 7DA2, 8DA2
122VU ANTI ICE/PROBES/2/TAT 1DA2 Y15
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/AOA 4DA2 Y13
122VU ANTI ICE/PROBES/2/PHC 2DA2 Y12
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
FOR 7DA3, 8DA3
122VU ANTI ICE/PROBES/PHC/3 2DA3 Y16
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/AOA 4DA3 Z15
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
Subtask 34-11-16-010-050
B. Get Access
(1) Put the access platform in position at the zone 128 for the static
probes 7DA1, 8DA1, 7DA2 and 8DA2.
(2) Put the access platform in position at the zone 120 for static probes
7DA3 and 8DA3.
EFF :
ALL 34-11-16
Page 402
May 01/04
TAI
4. Procedure
_________
Subtask 34-11-16-020-050
NOTE : This procedure is the same for the six static probes.
____
(2) Remove the two nuts (8), the washers (10) and the bolts (11).
(3) Disconnect the nut (1) and remove the static line (13).
EFF :
ALL 34-11-16
Page 403
Nov 01/08
TAI
Static Probe
Figure 401/TASK 34-11-16-991-001
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-11-16
Page 404
Nov 01/08
TAI
Static Probe
Figure 401A/TASK 34-11-16-991-001-A
R
EFF :
223-299, 306-399, 401-499, 34-11-16
Page 405
Aug 01/07
TAI
R **ON A/C 223-299, 306-399, 401-499,
Subtask 34-11-16-020-050-A
NOTE : This procedure is the same for the six static probes.
____
(2) Remove the two nuts (8), the washers (10) and the bolts (11).
(3) Disconnect the nut (1) and remove the static line (13).
(8) Remove the washer (16) and the bonding strip (15).
R
EFF :
223-299, 306-399, 401-499, 34-11-16
Page 406
Aug 01/07
TAI
**ON A/C ALL
TASK 34-11-16-400-002
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______
OPENED, SAFETIED AND TAGGED.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
EFF :
ALL 34-11-16
Page 407
May 01/05
TAI
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-16-860-052
(1) Make sure that the access platform is in position at the zone 128 for
the static probes 7DA1, 8DA1, 7DA2 and 8DA2.
(2) Make sure that the access platform is in position at the zone 120 for
the static probes 7DA3 and 8DA3.
EFF :
ALL 34-11-16
Page 408
May 01/08
TAI
Subtask 34-11-16-865-055
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
FOR 7DA1, 8DA1
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU ANTI ICE/PROBES/PHC/1 2DA1 D03
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
122VU ANTI ICE/PROBES/1/TAT 1DA1 Z12
FOR 7DA2, 8DA2
122VU ANTI ICE/PROBES/2/TAT 1DA2 Y15
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/AOA 4DA2 Y13
122VU ANTI ICE/PROBES/2/PHC 2DA2 Y12
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
FOR 7DA3, 8DA3
122VU ANTI ICE/PROBES/PHC/3 2DA3 Y16
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/AOA 4DA3 Z15
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
4. Procedure
_________
Subtask 34-11-16-420-051
NOTE : This procedure is the same for the six static probes.
____
EFF :
ALL 34-11-16
Page 409
Nov 01/08
TAI
(4) Carefully engage the static probe (5) on the bolts (7).
NOTE : The heating element must point to the nose of the aircraft for
____
static probes 7DA1, 8DA1, 7DA2 and 8DA2. It must point down
for static probes 7DA3 and 8DA3.
(6) Tighten the nuts which are diagonally opposite (X sequence) and
TORQUE them to 0.1 m.daN (8.84 lbf.in).
(12) Install the lugs (9) on the terminals (14) with the bolts (11), the
washers (10) and the nuts (8).
NOTE : The covers (12) of the static probe (8DA2) must not touch the
____
static line. Thus, make sure that the lugs (9) connected to
the terminals (14) are correctly installed as shown in the
figure given in this procedure.
Subtask 34-11-16-420-051-A
NOTE : This procedure is the same for the six static probes.
____
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-304, 306-399, 401-499,
34-11-16
Page 410
Nov 01/08
TAI
(3) Install a new packing (6).
(4) Carefully engage the static probe (5) on the bolts (7).
NOTE : The heating element must point to the nose of the aircraft for
____
static probes 7DA1, 8DA1, 7DA2 and 8DA2. It must point down
for static probes 7DA3 and 8DA3.
(5) Install the bonding strip (15) and the washer (16) (Ref. TASK 20-28-
00-912-004).
(7) Tighten the nuts which are diagonally opposite (X sequence) and
TORQUE them to 0.1 m.daN (8.84 lbf.in).
(13) Install the lugs (9) on the terminals (14) with the bolts (11), the
washers (10) and the nuts (8).
NOTE : The covers (12) of the static probe (8DA2) must not touch the
____
static line. Thus, make sure that the lugs (9) connected to
the terminals (14) are correctly installed as shown in the
figure given in this procedure.
Subtask 34-11-16-865-056
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5SQ1
FOR 7DA1, 8DA1
1DA1, 2DA1, 3DA1, 4DA1, 5DA1
FOR 7DA2, 8DA2
EFF :
ALL 34-11-16
Page 411
May 01/08
R
TAI
1DA2, 2DA2, 3DA2, 4DA2, 5DA2
FOR 7DA3, 8DA3
2DA3, 3DA3, 4DA3, 5DA3
Subtask 34-11-16-790-051
C. Leak Test
(1) Do a leak test of the main static system (Ref. TASK 34-13-00-790-
002).
Subtask 34-11-16-790-051-A
C. Leak Test
(1) Do a leak test of the main static system (Ref. TASK 34-13-00-790-
002).
Subtask 34-11-16-710-052
EFF :
ALL 34-11-16
Page 412
Nov 01/08
TAI
(Ref. TASK 34-11-16-710-001).
5. Close-up
________
Subtask 34-11-16-410-051
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-11-16
Page 413
May 01/08
TAI
PROBE - STATIC (7DA1,7DA2,7DA3,8DA1,8DA2,8DA3) - ADJUSTMENT/TEST
________________________________________________________________
TASK 34-11-16-710-001
CAUTION : REMOVE THE PROTECTIVE COVERS FROM THE PROBES BEFORE YOU DO THE TEST.
_______
CAUTION : DO NOT CONTINUE THE TEST FOR MORE THAN ONE MINUTE TO PREVENT DAMAGE
_______
TO THE PROBES.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-16-860-050
(2) Do the EIS start procedure (ECAM only) (Ref. TASK 31-60-00-860-001).
EFF :
ALL 34-11-16
Page 501
Feb 01/98
TAI
(3) Do the ADIRS start procedure for the related system:
For 7DA1,8DA1
ADIRU1
For 7DA2,8DA2
ADIRU2
For 7DA3,8DA3
ADIRU3
(Ref. TASK 34-10-00-860-002).
Subtask 34-11-16-865-054
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R FOR 7DA1, 8DA1
R 122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
R FOR 7DA2, 8DA2
R 122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
R FOR 7DA3, 8DA3
R 122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
4. Procedure
_________
Subtask 34-11-16-710-051
A. Heating test
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- Open the circuit breaker - on the panels 131VU and 132VU, the
ANTI-ICE PROBES 1 STATIC-5DA1 MASTER CAUT lights come on.
or - you can hear the single chime.
EFF :
ALL 34-11-16
Page 502
May 01/00
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
ANTI-ICE PROBES 2 STATIC-5DA2 - on the upper ECAM display unit, this
or indication comes into view:
ANTI-ICE PROBES 3 STATIC-5DA3. ANTI ICE CAPT L STAT (R STAT) or,
ANTI ICE F/O L STAT (R STAT) or,
ANTI ICE STBY L STAT (R STAT).
3. Close the circuit breaker(s) that - on the panels 131VU and 132VU, the
you opened before. MASTER CAUT lights go off.
- on the upper ECAM display unit, the
MEMO page comes into view.
5. Close-up
________
Subtask 34-11-16-860-051
(1) On the center pedestal, on the ECAM control panel, set the UPPER
DISPLAY and LOWER DISPLAY potentiometers to OFF.
EFF :
ALL 34-11-16
Page 503
Feb 01/99
R
TAI
PROBE - STATIC (7DA1,7DA2,7DA3,8DA1,8DA2,8DA3) - INSPECTION/CHECK
_________________________________________________________________
TASK 34-11-16-200-001
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______
OPENED, SAFETIED AND TAGGED.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-11-16
Page 601
Nov 01/07
TAI
3. __________
Job Set-up
Subtask 34-11-16-865-059
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 7DA1, 8DA1
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
FOR 7DA2, 8DA2
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
FOR 7DA3, 8DA3
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
Subtask 34-11-16-010-051
B. Get Access
4. Procedure
_________
Subtask 34-11-16-220-050
-------------------------------------------------------------------------------
INSPECT/CHECK MAXIMUM REMARKS
SERVICEABLE LIMITS
-------------------------------------------------------------------------------
A. For lightning Two marks are permitted. If there are more than two
strike damage. marks, replace the static
probe (Ref. TASK 34-11-16-
000-001) and (Ref. TASK
34-11-16-400-002).
EFF :
ALL 34-11-16
Page 602
Nov 01/07
TAI
-------------------------------------------------------------------------------
INSPECT/CHECK MAXIMUM REMARKS
SERVICEABLE LIMITS
-------------------------------------------------------------------------------
in.) is permitted. mm (0.06 in.), replace the
static probe (Ref. TASK
34-11-16-000-001) and
(Ref. TASK 34-11-16-400-
002).
5. Close-up
________
Subtask 34-11-16-410-053
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
Subtask 34-11-16-865-060
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
FOR 7DA1, 8DA1
5DA1.
FOR 7DA2, 8DA2
5DA2.
FOR 7DA3, 8DA3
5DA3.
EFF :
ALL 34-11-16
Page 603
Nov 01/07
TAI
___________________________________________________________________
MODULE - AIR DATA (19FP1,19FP2,19FP3,19FP4,19FP5,19FP6,19FP7,19FP8)
____________________
REMOVAL/INSTALLATION
TASK 34-11-17-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-11-17
Page 401
Nov 01/08
TAI
R **ON A/C ALL
3. __________
Job Set-up
Subtask 34-11-17-010-050
A. Get Access
(a) In the zone 123 for the Total Pressure ADM 19FP1 and 19FP3.
(b) In the zone 122 for the Total Pressure ADM 19FP2.
(c) In the zone 128 for the Static Pressure ADM 19FP4, 19FP5, 19FP6
and 19FP7.
EFF :
ALL 34-11-17
Page 402
May 01/99
TAI
Subtask 34-11-17-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 19FP1, 19FP4, 19FP5
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
FOR 19FP2, 19FP6, 19FP7
EFF :
ALL 34-11-17
Page 403
Nov 01/08
TAI
**ON A/C ALL
4. Procedure
_________
Subtask 34-11-17-020-050
(1) Precaution :
NOTE : During the removal of the Static Pressure ADM 19FP4 and 19FP6,
____
you must close the door 824. Before you close, put a warning
notice in position to tell persons not to open the door.
(4) Put blanking caps on the disconnected electrical connectors (7) and
(8).
(6) Remove the four screws (3) and the washers (4); when you do this,
hold the ADM (2).
EFF :
ALL 34-11-17
Page 404
Nov 01/08
TAI
INTENTIONALLY BLANK
R
34-11-17
Page 405
May 01/00
TAI
Pressure ADM
Figure 401/TASK 34-11-17-991-001- 12 (SHEET 1)
R
EFF :
001-050, 053-099, 201-203, 34-11-17
Page 406
Nov 01/07
TAI
Pressure ADM
Figure 401/TASK 34-11-17-991-001- 22 (SHEET 2)
R
EFF :
001-050, 053-099, 201-203, 34-11-17
Page 407
Nov 01/07
TAI
Pressure ADM
Figure 401A/TASK 34-11-17-991-001-A12 (SHEET 1)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-11-17
Page 408
Nov 01/08
TAI
Pressure ADM
Figure 401A/TASK 34-11-17-991-001-A22 (SHEET 2)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-11-17
Page 409
Nov 01/08
TAI
TASK 34-11-17-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-11-17
Page 410
Nov 01/08
TAI
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-17-860-050
A. Get Access
NOTE : During the installation of the Static Pressure ADM 19FP4 and
____
R 19FP6, you must close the door 824. Before you close it, put a
R warning notice in position to tell persons not to open the door.
(a) In the zone 123 for the Total Pressure ADM 19FP1 and 19FP3.
(b) In the zone 122 for the Total Pressure ADM 19FP2.
(c) In the zone 128 for the Static Pressure ADM 19FP4, 19FP5, 19FP6
and 19FP7.
R (2) Make sure that the access door are open (Ref. TASK 52-41-00-010-002):
FOR 19FP1, 19FP3
812
FOR 19FP2
822
FOR 19FP5, 19FP7
824
FOR 19FP8
811
FOR 19FP4, 19FP6
824
(3) Make sure that the protective cover is removed from the battery power
center 105VU.
EFF :
ALL 34-11-17
Page 411
Aug 01/07
TAI
Subtask 34-11-17-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 19FP1, 19FP4, 19FP5
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
FOR 19FP2, 19FP6, 19FP7
EFF :
ALL 34-11-17
Page 412
Nov 01/08
TAI
**ON A/C ALL
4. Procedure
_________
Subtask 34-11-17-420-050
(1) Put the ADM (2) in position on its support and hold it in this
position.
(2) Attach the ADM (2) with the four screws (3) and the washers (4).
(3) Remove the blanking caps from the disconnected electrical connectors
(7) and (8).
(4) Make sure that the electrical connectors are in the correct
condition.
(7) Make sure that the quick-disconnect coupling are in the correct
condition.
(9) Make sure that you can see the blue ring on the quick-disconnect
coupling.
EFF :
ALL 34-11-17
Page 413
Nov 01/08
TAI
R Illustration of the Quick-Disconnect coupling
R Figure 402/TASK 34-11-17-991-002
EFF :
ALL 34-11-17
Page 414
Feb 01/07
TAI
(10) Pull the quick-disconnect coupling to be sure that it is correctly
attached.
R WARNING : IF YOU REPLACE MORE THAN ONE ADM, MAKE SURE THAT A SECOND
_______
R QUALIFIED MECHANIC DOES A VISUAL INSPECTION OF THE QUICK-
R DISCONNECT COUPLING CONNECTION. THE TWO MECHANICS MUST SIGN
R OFF THE JOB.
Subtask 34-11-17-710-050
Subtask 34-11-17-710-050-A
5. Close-up
________
Subtask 34-11-17-410-050
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-11-17
Page 415
Feb 01/09
TAI
FOR 19FP4, 19FP5, 19FP6, 19FP7
824 (Ref. TASK 52-41-00-410-002)
FOR 19FP8
811
(4) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-11-17
Page 416
Feb 01/09
R
TAI
___________________________________________________________________
MODULE - AIR DATA (19FP1,19FP2,19FP3,19FP4,19FP5,19FP6,19FP7,19FP8)
_______________
ADJUSTMENT/TEST
TASK 34-11-17-710-001
1. __________________
Reason for the Job
Do this test after the removal/installation of the Air Data Module when the
CFDS is unserviceable.
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-11-17
Page 501
Feb 01/96
TAI
3. __________
Job Set-up
Subtask 34-11-17-860-051
(2) Do the ADIRS start procedure (ADIRU related to the installed ADM
only)
(Ref. TASK 34-10-00-860-002)
Subtask 34-11-17-010-051
B. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-11-17-865-053
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-11-17
Page 502
Nov 01/07
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R **ON A/C 211-212, 215-215, 218-299, 306-399, 401-499,
4. Procedure
_________
Subtask 34-11-17-710-051
A. Make sure that the PFD of the onside ADIRU related to the installed ADM
shows the correct altitude (the ALT flag goes out of view and the SPD
flag goes out of view on the speed scale).
NOTE : To do the check of the altitude display with the ADIRU3 set the
____
AIR DATA selector switch to CAPT/3 (F/O/3) on the SWITCHING panel
8VU.
5. Close-up
________
Subtask 34-11-17-860-052
Subtask 34-11-17-410-051
B. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-11-17
Page 503
Nov 01/08
TAI
(4) Remove the access platform(s).
EFF :
ALL 34-11-17
Page 504
May 01/00
TAI
SENSOR - TOTAL AIR TEMPERATURE (11FP1,11FP2) - REMOVAL/INSTALLATION
___________________________________________________________________
TASK 34-11-18-000-001
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______
OPENED, SAFETIED AND TAGGED.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-11-18
Page 401
Nov 01/08
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-11-18-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
FOR 11FP1
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU ANTI ICE/PROBES/PHC/1 2DA1 D03
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
EFF :
ALL 34-11-18
Page 402
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
**ON A/C ALL
Subtask 34-11-18-860-052
4. Procedure
_________
Subtask 34-11-18-020-051
(3) Hold the sensor (5) and disconnect the connector (1).
(4) Put blanking caps on the disconnected electrical connectors (1) and
(4).
EFF :
ALL 34-11-18
Page 403
Nov 01/08
TAI
Total Air Temperature (TAT) Sensor
Figure 401/TASK 34-11-18-991-001
R
EFF :
001-050, 053-099, 201-203, 34-11-18
Page 404
Nov 01/07
TAI
Total Air Temperature (TAT) Sensor
Figure 401A/TASK 34-11-18-991-001-A
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-11-18
Page 405
Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
Subtask 34-11-18-020-051-A
(1) Disconnect the pressure line (8) from the sensor tube (7).
(2) Put blanking plugs on the ends of the disconnected line (8) and
sensor tube (7).
(5) Hold the sensor (5) and disconnect the connector (1).
(6) Put blanking caps on the disconnected electrical connectors (1) and
(4).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-11-18
Page 406
Nov 01/08
TAI
**ON A/C ALL
TASK 34-11-18-400-001
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE
_______
OPENED, SAFETIED AND TAGGED.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
EFF :
ALL 34-11-18
Page 407
May 01/00
R
TAI
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-18-860-054
(1) Make sure that the access platform is in position at zone 120.
EFF :
ALL 34-11-18
Page 408
Nov 01/08
TAI
Subtask 34-11-18-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
FOR 11FP1
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU ANTI ICE/PROBES/PHC/1 2DA1 D03
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
EFF :
ALL 34-11-18
Page 409
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
122VU ANTI ICE/PROBES/2/AOA 4DA2 Y13
122VU ANTI ICE/PROBES/2/PHC 2DA2 Y12
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
4. Procedure
_________
Subtask 34-11-18-420-051
(4) Remove the blanking caps from the connectors (1) and (4).
(5) Make sure that the electrical connectors are clean and in the correct
condition.
(6) Connect the connector (1) to the sensor (5) out of the housing (2).
(7) Install the sensor (5) in its housing (2) and hold it.
NOTE : Make sure that the seal (3) is in the correct position.
____
(9) Check the bonding contact resistance between the TAT Sensor (5) and
the fuselage structure (2) (Ref. TASK 20-28-00-720-005).
EFF :
ALL 34-11-18
Page 410
Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
Subtask 34-11-18-420-051-A
(4) Remove the blanking caps from the connectors (1) and (4).
(5) Make sure that the electrical connectors are clean and in the correct
condition.
(6) Connect the connector (1) to the sensor (5) out of the housing (2).
(7) Install the sensor (5) in its housing (2) and hold it.
NOTE : Make sure that the seal (3) is in the correct position.
____
(9) Remove the blanking plugs from the disconnected tube (7) and line (8)
ends.
(10) Connect the pressure line (8) to the the sensor tube (7).
(11) Check the bonding contact resistance between the TAT Sensor (5) and
the fuselage structure (2) (Ref. TASK 20-28-00-720-005).
Subtask 34-11-18-860-053
EFF :
ALL 34-11-18
Page 411
Nov 01/08
TAI
Subtask 34-11-18-865-052
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5SQ1
FOR 11FP1
4FP1, 4FP3, 1DA1, 2DA1, 3DA1, 4DA1, 5DA1
FOR 11FP2
4FP2, 1DA2, 2DA2, 3DA2, 4DA2, 5DA2
R
Subtask 34-11-18-710-050-C
NOTE : The TAT sensor 1 is related to the ADIRU 1 and 3. The TAT
____
sensor 2 is related to the ADIRU 2.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the MCDU MENU mode key. - the MCDU MENU page comes into view.
- push the line key adjacent to - the CFDS MENU page comes into view.
the CFDS indication.
- push the line key adjacent to - the SYSTEM REPORT/TEST page comes
the SYSTEM REPORT/TEST into view.
indication.
- push the line key adjacent to - the SYSTEM REPORT/TEST NAV page comes
the NAV indication. into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) page comes
the ADR1 (ADR2) (ADR3) into view.
EFF :
ALL 34-11-18
Page 412
Feb 01/09
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
indication (related to the
removed TAT sensor).
- push the line key adjacent to - the INPUT STATUS page comes into
the INPUT STATUS indication. view.
- push NEXT PAGE key until you - INPUT STATUS pages 3/8 and 7/8 come
get ADR1 (ADR2) (ADR3)/INPUT into view:
STATUS pages 3/8 and 7/8. do a check of the TAT data (OPEN, XXX
⁰ C).
R Subtask 34-11-18-710-050
R NOTE : The TAT sensor 1 is related to the ADIRU 1 and 3. The TAT
____
R sensor 2 is related to the ADIRU 2.
R
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-311, 401-499,
34-11-18
Page 413
Feb 01/09
TAI
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - push the MCDU MENU mode key. - the MCDU MENU page comes into view.
R - push the line key adjacent to - the CFDS MENU page comes into view.
R the CFDS indication.
R - push the line key adjacent to - the SYSTEM REPORT/TEST page comes
R the SYSTEM REPORT/TEST into view.
R indication.
R - push the line key adjacent to - the SYSTEM REPORT/TEST NAV page comes
R the NAV indication. into view.
R - push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) 1/2 page
R the ADR1 (ADR2) (ADR3) comes into view.
R indication (related to the
R removed TAT sensor).
R - push the line key adjacent to - the CURRENT STATUS page comes into
R the CURRENT STATUS indication. view.
R - if you found no defect after the
R installation of the new sensor, the
R NO FAULTS indication comes into view.
R
EFF :
001-050, 053-099, 401-499, 34-11-18
Page 414
Feb 01/09
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-211, 215-215, 218-222, 224-228,
R 301-399,
R Post SB 34-1330 For A/C 001-050,053-099,201-203,211-211,215-215,218-222,
R 224-228,301-311,
R Post SB 34-1350 For A/C 001-050,201-203,211-211,215-215,218-222,224-228,
R 301-311,
R Subtask 34-11-18-710-050-D
R NOTE : The TAT sensor 1 is related to the ADIRU 1 and 3. The TAT
____
R sensor 2 is related to the ADIRU 2.
R
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - push the MCDU MENU mode key. - the MCDU MENU page comes into view.
R - push the line key adjacent to - the CFDS MENU page comes into view.
R the CFDS indication.
R - push the line key adjacent to - the SYSTEM REPORT/TEST page comes
R the SYSTEM REPORT/TEST into view.
R indication.
R - push the line key adjacent to - the SYSTEM REPORT/TEST NAV page comes
R the NAV indication. into view.
R - push the line key adjacent to - the ADR1 (ADR2) (ADR3) page comes
R the ADR1 (ADR2) (ADR3) into view.
R indication (related to the
R removed TAT sensor).
R - push the line key adjacent to - the CURRENT STATUS page comes into
R the CURRENT STATUS indication. view.
R
EFF : 001-050, 053-099, 201-203, 211-211,
215-215, 218-222, 224-228, 301-399,
34-11-18
Page 415
Feb 01/09
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - push NEXT PAGE key until you - CURRENT STATUS pages 5/8 and 7/8 come
R get ADR1 (ADR2) (ADR3)/CURRENT into view:
R STATUS pages 5/8 and 7/8. do a check of the TAT data (OPEN, XXX
R DEGC).
Subtask 34-11-18-200-051-A
E. Do a check of the TAT sensors 1 and 2 to make sure that the suction
operates correctly
(2) On the AIR COND section of the panel 30VU, push the PACK1 and PACK2
pushbutton switches (OFF legends off).
(3) At the TAT sensors 1 and 2, listen for the suction noise.
(4) On the AIR COND section of the panel 30VU, release the PACK1 and
PACK2 pushbutton switches (OFF legends on).
5. Close-up
________
Subtask 34-11-18-860-055
EFF :
ALL 34-11-18
Page 416
Feb 01/09
TAI
(3) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-11-18
Page 417
Feb 01/09
TAI
SENSOR - TOTAL AIR TEMPERATURE (11FP1,11FP2) - ADJUSTMENT/TEST
______________________________________________________________
TASK 34-11-18-710-001
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-18-860-051
EFF :
ALL 34-11-18
Page 501
Feb 01/09
TAI
(3) Do the ADIRS start procedure
FOR 11FP1
ADIRU 1 and 3 only
FOR 11FP2
ADIRU 2 only
(Ref. TASK 34-10-00-860-002).
R Subtask 34-11-18-860-051-A
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-11-18
Page 502
Feb 01/09
TAI
R **ON A/C ALL
Subtask 34-11-18-865-053
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 11FP1
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
EFF :
ALL 34-11-18
Page 503
Feb 01/09
TAI
4. Procedure
_________
Subtask 34-11-18-710-051
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the ECAM/ND XFR selector - the display of the lower ECAM DU
switch to CAPT. moves to the CAPT ND.
- make sure that the SAT and TAT
indications are shown at the bottom
of the CAPT ND, on the left side.
- set the AIR DATA selector switch - make sure that the SAT and TAT
to CAPT/3. indications stay in view on the CAPT
ND.
EFF :
ALL 34-11-18
Page 504
Feb 01/09
TAI
R **ON A/C 228-299, 309-399, 401-499,
R Subtask 34-11-18-710-051-A
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - set the ECAM/ND XFR selector - the display of the lower ECAM DU
R switch to CAPT. moves to the CAPT ND.
R - make sure that the SAT and TAT
R indications are shown at the bottom
R of the CAPT ND, on the left side.
R - set the AIR DATA selector switch - make sure that the SAT and TAT
R to CAPT/3. indications are shown at the bottom
R section of the lower ECAM DU, on the
R left side (from ADIRU 3).
R - set the ECAM/ND XFR selector - make sure that the SAT and TAT
R switch to F/O. indications are shown at the bottom
R - set the AIR DATA selector switches of the F/O ND, on the left side (from
R to F/O/3. ADIRU 3).
EFF :
228-299, 309-399, 401-499, 34-11-18
Page 505
Feb 01/09
TAI
R (b) set the ECAM/ND XFR selector switch to NORM.
5. Close-up
________
Subtask 34-11-18-860-050
(2) On the center pedestal,on the ECAM control panel, set the LOWER
DISPLAY potentiometer to OFF.
(4) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-11-18
Page 506
Feb 01/09
TAI
SENSOR - TOTAL AIR TEMPERATURE (11FP1,11FP2) - INSPECTION/CHECK
_______________________________________________________________
TASK 34-11-18-200-002
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-11-18
Page 601
Nov 01/06
TAI
3. __________
Job Set-up
Subtask 34-11-18-865-054
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
FOR 11FP1
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU ANTI ICE/PROBES/PHC/1 2DA1 D03
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
EFF :
ALL 34-11-18
Page 602
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/AOA 4DA2 Y13
122VU ANTI ICE/PROBES/2/PHC 2DA2 Y12
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
Subtask 34-11-18-860-056
B. Get Access
4. Procedure
_________
Subtask 34-11-18-220-050
(a) Color
During the ageing of the sensor, the color of the sensor becomes
brownish and/or blackish.
This coloration has no effect on the operation of the sensor.
EFF :
ALL 34-11-18
Page 603
Feb 01/09
TAI
**ON A/C 405-499,
Subtask 34-11-18-220-050-A
(a) Color
During the ageing of the sensor, the color of the sensor becomes
brownish and/or blackish.
This coloration has no effect on the operation of the sensor.
5. Close-up
________
Subtask 34-11-18-865-055
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5SQ1
FOR 11FP1
4FP1, 4FP3, 1DA1, 2DA1, 3DA1, 4DA1, 5DA1
FOR 11FP2
4FP2, 1DA2, 2DA2, 3DA2, 4DA2, 5DA2
EFF :
ALL 34-11-18
Page 604
Feb 01/09
TAI
Subtask 34-11-18-860-057
(2) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-11-18
Page 605
Nov 01/08
TAI
SENSOR - ANGLE OF ATTACK (3FP1,3FP2,3FP3) - REMOVAL/INSTALLATION
________________________________________________________________
TASK 34-11-19-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-19-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 3FP1
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU ANTI ICE/PROBES/PHC/1 2DA1 D03
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
EFF :
ALL 34-11-19
Page 401
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
**ON A/C ALL
EFF :
ALL 34-11-19
Page 402
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
**ON A/C ALL
Subtask 34-11-19-860-050
B. Put an access platform in position in zone 231 for 3FP1 (232 for 3FP2)
(127 for 3FP3).
4. Procedure
_________
Subtask 34-11-19-020-050
CAUTION : DO NOT HOLD THE AOA SENSOR BY THE VANE WHEN YOU MOVE IT. IF YOU
_______
DO, YOU CAN CAUSE DAMAGE TO THE AOA SENSOR.
NOTE : The procedure is the same for angle of attack sensors 3FP1, 3FP2
____
and 3FP3.
EFF :
ALL 34-11-19
Page 403
Feb 01/06
R
TAI
(9) Put blanking caps on the disconnected electrical connectors (1) and
(9).
EFF :
ALL 34-11-19
Page 404
Feb 01/06
R
TAI
TASK 34-11-19-400-001
CAUTION : DO NOT HOLD THE AOA SENSOR BY THE VANE WHEN YOU MOVE IT. IF YOU DO,
_______
YOU CAN CAUSE DAMAGE TO THE AOA SENSOR.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
EFF :
ALL 34-11-19
Page 405
Aug 01/08
TAI
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-19-860-051
(1) Make sure that the access platform is in position in zone 231 for
3FP1 (232 for 3FP2) (127 for 3FP3).
Subtask 34-11-19-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 3FP1
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU ANTI ICE/PROBES/PHC/1 2DA1 D03
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
EFF :
ALL 34-11-19
Page 406
Nov 01/07
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R **ON A/C 211-212, 215-215, 218-299, 306-399, 401-499,
EFF :
ALL 34-11-19
Page 407
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R **ON A/C 211-212, 215-215, 218-299, 306-399, 401-499,
4. Procedure
_________
Subtask 34-11-19-420-050
NOTE : The procedure is the same for angle of attack sensors 3FP1,
____
3FP2 and 3FP3.
(c) Remove the blanking caps from the connectors (1) and (9).
(d) Make sure that the connectors (1) and (9) are clean and in the
correct condition.
(h) Put the angle of attack sensor (5) in position with the stud (4)
and hold it.
EFF :
ALL 34-11-19
Page 408
Nov 01/08
TAI
(i) Tighten the screw (6).
(l) Check the bonding contact resistance between the AOA Sensor (7)
and the fuselage struture (2) (Ref. TASK 20-28-00-720-005).
NOTE : If the cure time of the sealant will cause a flight delay,
____
the aircraft can operate without the sealant for a maximum
period of 24 hours from installation of the sensor.
Before application of the sealant, it is necessary to make
sure that the surfaces are clean and in the correct
condition (no moisture, dust, etc.).
NOTE : The procedure is the same for angle of attack sensors 3FP1,
____
3FP2 and 3FP3.
EFF :
ALL 34-11-19
Page 409
Nov 01/08
TAI
(b) Do an inspection of the component interface and/or the adjacent
area.
(c) Remove the blanking caps from the connectors (1) and (9).
(d) Make sure that the connectors (1) and (9) are clean and in the
correct condition.
(h) Put the angle of attack sensor (5) in position with the stud (4)
and hold it.
EFF :
ALL 34-11-19
Page 410
Nov 01/08
TAI
R Angle of Attack Sensor.
Figure 401/TASK 34-11-19-991-002
EFF :
ALL 34-11-19
Page 411
Nov 01/08
TAI
(l) Check the bonding contact resistance between the AOA Sensor (7)
and the fuselage struture (2) (Ref. TASK 20-28-00-720-005).
NOTE : If the cure time of the sealant will cause a flight delay,
____
the aircraft can operate without the sealant for a maximum
period of 24 hours from installation of the sensor.
Before application of the sealant, it is necessary to make
sure that the surfaces are clean and in the correct
condition (no moisture, dust, etc.).
Subtask 34-11-19-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
FOR 3FP1
4FP1, 5FP1, 9FP, 1DA1, 2DA1, 3DA1, 4DA1, 5DA1
FOR 3FP2
4FP2, 5FP2, 10FP, 1DA2, 2DA2, 3DA2, 4DA2, 5DA2
FOR 3FP3
4FP3, 5FP3, 9FP, 2DA3, 3DA3, 4DA3, 5DA3
Subtask 34-11-19-710-050
C. Test
EFF :
ALL 34-11-19
Page 412
Nov 01/08
R
TAI
5. Close-up
________
Subtask 34-11-19-860-052
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-11-19
Page 413
Nov 01/08
TAI
SENSOR - ANGLE OF ATTACK (3FP1,3FP2,3FP3) - INSPECTION/CHECK
____________________________________________________________
TASK 34-11-19-200-001
1. __________________
Reason for the Job
Make sure that there is no paint on the vane and on the movable part of the
three AOA sensors.
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-11-19-860-053
A. Get Access
(1) Put an access platform in position in zone 231 for AOA sensor 3FP1
(232 for 3FP2) (127 for 3FP3).
R
EFF :
053-099, 34-11-19
Page 601
Nov 01/07
TAI
Subtask 34-11-19-865-053
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 3FP1
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
121VU ADIRS/ADIRU/3PWR/SWTG 9FP N10
FOR 3FP2
121VU ADIRS/ADIRU/2PWR/SHED 10FP N11
121VU ADIRS/ADIRU/2/26VAC AND AOA 5FP2 N09
121VU ADIRS/ADIRU/2/115VAC 4FP2 N07
122VU ANTI ICE/PROBES/2/AOA 4DA2 Y13
FOR 3FP3
121VU ADIRS/ADIRU/3PWR/SWTG 9FP N10
121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N08
121VU ADIRS/ADIRU/3/115VAC 4FP3 N06
122VU ANTI ICE/PROBES/3/AOA 4DA3 Z15
4. Procedure
_________
CAUTION : DO NOT TOUCH THE AOA VANE IMMEDIATELY AFTER POWER-OFF BECAUSE IT
_______
IS VERY HOT AND CAN BURN YOU. LET THE TEMPERATURE OF THE AOA VANE
DECREASE FOR A FEW MINUTES BEFORE YOU TOUCH IT.
Subtask 34-11-19-210-051
A. Make sure that there is no paint on the vane and mounting base of the
three AOA sensors.
R
EFF :
053-099, 34-11-19
Page 602
Nov 01/07
TAI
Subtask 34-11-19-210-052
CAUTION : MAKE SURE THAT NO LIQUID GOES INTO THE BEARING THROUGH THE
_______
SPACE BETWEEN THE AOA VANE AND BODY. LIQUID IN THE AOA SENSOR
CAN CAUSE CORROSION AND DAMAGE.
Subtask 34-11-19-210-053
C. Manually turn the AOA sensor from the maximum to the minimum mechanical
stops (+ 85⁰ to - 35⁰) and make sure that there is no hard point.
5. Close-up
________
Subtask 34-11-19-860-054
(2) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF :
053-099, 34-11-19
Page 603
Nov 01/07
TAI
Subtask 34-11-19-865-054
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 3FP1
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
121VU ADIRS/ADIRU/3PWR/SWTG 9FP N10
FOR 3FP2
121VU ADIRS/ADIRU/2PWR/SHED 10FP N11
121VU ADIRS/ADIRU/2/26VAC AND AOA 5FP2 N09
121VU ADIRS/ADIRU/2/115VAC 4FP2 N07
122VU ANTI ICE/PROBES/2/AOA 4DA2 Y13
FOR 3FP3
121VU ADIRS/ADIRU/3PWR/SWTG 9FP N10
121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N08
121VU ADIRS/ADIRU/3/115VAC 4FP3 N06
122VU ANTI ICE/PROBES/3/AOA 4DA3 Z15
R
EFF :
053-099, 34-11-19
Page 604
Nov 01/07
TAI
R _______________________________________________________
AIR DATA/INERTIAL REFERENCE SYSTEM (ADIRU & CDU OR MSU)
R DESCRIPTION AND OPERATION
_________________________
1. _______
General
R The Air Data/Inertial Reference System (ADIRS) provides the main air data
R and heading/attitude/navigation data to the aircraft systems.
R The main computers of the ADIRS are the three Air Data/Inertial Reference
R Units (ADIRU) which are controlled by the ADIRS Control and Display Unit
R (CDU).
R The ADIRS is a three channel system. Each channel is isolated from the
R others and provides independent information as defined in ARINC 738.
R Each ADIRU contains:
R - an Air Data Reference (ADR) portion. Its operation is described in 34-13
R - an Inertial Reference (IR) portion. Its operation is described in 34-14.
R Power supply is common for ADR and IR and described in 34-11.
2. __________________
Component Location
R
R (Ref. Fig. 001, 002)
R The three ADIRUs are installed in the avionics compartment.
R The ADIRS CDU is installed in the cockpit.
R -------------------------------------------------------------------------------
R FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
R | | | | DOOR | REF.
R -------------------------------------------------------------------------------
R 1FP1 ADIRU-1 127 824 34-12-34
R 1FP2 ADIRU-2 128 824 34-12-34
R 1FP3 ADIRU-3 127 824 34-12-34
R 2FP CDU-ADIRS 20VU 211 831 34-12-12
EFF :
001-050, 053-099, 34-12-00
Page 1
Config-1 Feb 01/08
TAI
ADIRS - Component Location
R Figure 001
EFF :
001-050, 053-099, 34-12-00
Page 2
Config-1 Feb 01/08
TAI
ADIRS CDU - Component Location
R Figure 002
EFF :
001-050, 053-099, 34-12-00
Page 3
Config-1 Feb 01/08
TAI
3. Interface
_________
A. Mechanical Interface
The ADIRUs are installed and aligned on a specific mounting tray in the
avionics compartment in accordance with the installation design defined
in ARINC 738. The ADIRU is to 10 MCU size. In order to ensure attitude
and azimuth accuracy, the mounting tray orientation complies with the
following tolerances:
- pitch and roll: plus or minus 12 minutes
- azimuth: plus or minus 12 minutes.
B. Electrical Interface
(a) General
R
EFF :
001-050, 053-099, 34-12-00
Page 4
Config-1 Feb 01/08
TAI
ADIRS CDU - Electrical Interface
R Figure 003
R
EFF :
001-050, 053-099, 34-12-00
Page 5
Config-1 Feb 01/08
TAI
INTENTIONALLY BLANK
R
34-12-00
Page 6
Config-1 Aug 01/07
TAI
BNR: binary data word
BCD: binary coded decimal data word
ISO: data word coded in ISO5 code
DIS: discrete data word
HEX: hexadecimal coded
HYB: mixed code.
- ALPHA CODE: indicates the parameter mnemonic code
- SOURCE ORIGIN: parameter source computer or system.
EFF :
001-050, 053-099, 34-12-00
Page 7
Config-1 Feb 01/08
R
TAI
1
_ CDU bus inputs
The CDU receives an ARINC 429 High Speed bus from the IR
portion of each ADIRU.
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 010 |PRESENT |90S-90N |DEG | | 6 | | BCD| |
| |POS LAT-D |(POSITIVE: |& | | | | | |
| | |NORTH FROM |MIN | | | | | |
| | |0 DEG) | | | | | | |
| | |RESOL = .1 | | | | | | |
|-----------------------------------------------------------------------------|
| 011 |PRESENT |180E-180W |DEG | | 6 | | BCD| |
| |POS LONG-D |(POSITIVE: |& | | | | | |
| | |EAST FROM |MIN | | | | | |
| | |0 DEG) | | | | | | |
| | |RESOL = .1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 012 |GROUND |0-2000 |Kt | | 4 | | BCD| |
| |SPEED-D |(ALWAYS | | | | | | |
| | |POSITIVE) | | | | | | |
| | |RESOL = 1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 013 |TRACK |0-359.9 |DEG | | 4 | | BCD| |
| |ANGLE TRUE |(POSITIVE: | | | | | | |
| | |CW FROM | | | | | | |
| | |NORTH) | | | | | | |
| | |RESOL = .1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 014 |MAGNETIC |0-359.9 |DEG | | 4 | | BCD| |
| |HEADING |(POSITIVE: | | | | | | |
| | |CW FROM | | | | | | |
| | |NORTH) | | | | | | |
| | |RESOL = .1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 015 |WIND SPEED |0-256 |Kt | | 3 | | BCD| |
| | |(ALWAYS | | | | | | |
| | |POSITIVE) | | | | | | |
| | |RESOL = 1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
EFF :
001-050, 053-099, 34-12-00
Page 8
Config-1 Feb 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 016 |WIND DIR |0-359 |DEG | | 3 | | BCD| |
| |TRUE |(POSITIVE: | | | | | | |
| | |CW FROM | | | | | | |
| | |NORTH) | | | | | | |
| | |RESOL = 1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 044 |TRUE |0-359.9 |DEG | | 4 | | BCD| |
| |HEADING |(POSITIVE: | | | | | | |
| | |CW FROM | | | | | | |
| | |NORTH) | | | | | | |
| | |RESOL = .1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 270 |IR DISCRETE| | | | 19 | | DIS| |
| |(1) | | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 277 |CDU TEST | | | | 18 | | DIS| |
| |WORD (1) | | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 350 |ACTION | | | | 19 | | DIS| |
| |CODE (1) | | | | | | | |
-------------------------------------------------------------------------------
CDU IR Input Labels
NOTE : (1) The complete definition of the labels 270, 277 and
____
350 is detailed in 34-14-00 Para. 2.D.(1).
EFF :
001-050, 053-099, 34-12-00
Page 9
Config-1 Feb 01/08
R
TAI
2
_ CDU bus outputs
The CDU sends the parameters detailed in the following table
to the IR portion of each ADIRU:
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 041 |SET | 90S-90N |DEG | | 6 | | BCD| |
| |LATITUDE | (POSITIVE: |& | | | | | |
| | | NORTH) |MIN | | | | | |
| | | RESOL = 0.1| | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 042 |SET | 180E-180W |DEG | | 6 | | BCD| |
| |LONGITUDE | (POSITIVE: |& | | | | | |
| | | EAST) |MIN | | | | | |
| | | RESOL = 0.1| | | | | | |
|--------------|----------| -----------|----|----|----|----|----|-------------|
| 043 |SET | 0-359 |DEG | | 3 | | BCD| |
| |MAGNETIC | (POSITIVE: | | | | | | |
| |HDG | CW FROM N) | | | | | | |
| | | RESOL = 1 | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 277 |CDU TEST | | | | 19 | | DIS| |
-------------------------------------------------------------------------------
CDU Output Labels
(2) ADIRU
The ADIRU receives data and computes outputs in accordance with ARINC
738. It uses an ARINC 600 type 2 floating-connector.
NOTE : For the ADIRU 3, only two ADM input buses are used: one
____
for the total pressure data and the other for the averaged
static pressure data.
EFF :
001-050, 053-099, 34-12-00
Page 10
Config-1 Feb 01/08
R
TAI
- digital baro-correction inputs
The ADR provides two baro-correction digital data input ports.
The incoming data from the Flight Control Unit (FCU) are in
ARINC 429 low speed format.
The ADR receives data from baro-correction bus A.
The baro-correction is used to compensate baro-corrected
altitude output.
- initialization data inputs
The IR portion of the ADIRU receives data from either ARINC 702
Flight Management and Guidance Computer (FMGC). The data are in
ARINC 429 low speed format. The initialization parameters are
latitude and longitude or magnetic heading.
- CFDIU input
The ADIRU provides one Centralized Fault Display Interface Unit
(CFDIU) input bus. The data are in ARINC 429 low speed format.
The CFDIU continuously transmits data to all systems. The ADIRU
uses these data to accept commands from the CFDIU.
- Air Data Reference inputs
The IR portion of the ADIRU provides two digital data input
ports for receiving data from the other ADIRUs.
The incoming data are in ARINC 429 low speed format and include
altitude and true airspeed.
- the ADIRU provides provision for digital input buses (two buses
are reserved for the Global Positioning System (GPS)).
- CDU inputs
The IR portion of the ADIRU receives data from one ARINC 738
CDU. The data are in ARINC 429 low speed format. These data are
initialization parameters (latitude and longitude or magnetic
heading) and CDU status.
EFF :
001-050, 053-099, 34-12-00
Page 11
Config-1 Feb 01/08
R
TAI
- 26VAC reference
The ADIRU accepts up to three 26VAC resolver reference inputs.
Only one is used for the AOA resolver.
The ADIRU provides provisions for analog inputs (two 26VAC
reference inputs and three analog baro-correction inputs are
reserved).
EFF :
001-050, 053-099, 34-12-00
Page 12
Config-1 Feb 01/08
R
TAI
(c) Discrete inputs
These inputs are generally pin programs except for:
- Static Source Error Correction (SSEC) and AOA correction and
selection discretes which come from the Slat and Flap Control
Computers (SFCC) and are linked to flap position
R (Ref. Fig. 004)
- heat discretes which come from the associated Probe Heat
Computer (PHC)
- VMO/MMO discrete provided by the position of the L/G DOWN
VMO/MMO SELECTION switch (22FP).
- ADR selection:
It indicates, to the IR, the air data source to be used.
- CDU ON/OFF:
It indicates, to the ADIRU, whether the ADIRU data are
currently displayed on the CDU.
- ADR OFF:
It indicates, to the ADIRU, that the crew has pushed the ADR
pushbutton switch on the ADIRS CDU. This commands the ADIRU to
stop the transmission of the ADR output buses.
- IR MODE SELECT:
It indicates, to the ADIRU, the position of the associated
selector switch on the CDU. Three positions can be coded: OFF,
NAV, ATT. This gives the computer operating mode.
EFF :
001-050, 053-099, 34-12-00
Page 13
Config-1 Feb 01/08
TAI
ADIRS - ADIRUs/SFCCs Interface
R Figure 004
EFF :
001-050, 053-099, 34-12-00
Page 14
Config-1 Feb 01/08
TAI
This permits to choose between two sets of filter
characteristics for the ADR outputs.
- mounting position:
This indicates the orientation of the unit to the IR portion.
It is used to know where are the longitudinal and lateral axes
of the aircraft and the sign of motion measured.
- SDI:
This indicates on which side (CAPT, F/O, Standby) the ADIRU is
installed.
- CFDS message select:
The ADIRU selects a table of maintenance messages.
EFF :
001-050, 053-099, 34-12-00
Page 15
Config-1 Feb 01/08
R
TAI
(d) Digital outputs
- The ADR portion of the ADIRU provides eight identical ARINC 429
Low Speed buses. Two of these buses are dedicated to the
interface with the Electronic Control Units (ECU).
The number of these buses is 5 and 6.
The system users are described in the table below:
----------------------------------------------------------------------------
| USERS | ADR 1 BUS | ADR 2 BUS | ADR 3 BUS |
| |-----------------|-----------------|-----------------|
| |1 |2 |3 |4 |5 |6 |1 |2 |3 |4 |5 |6 |1 |2 |3 |4 |5 |6 |
|--------------------------------------------------------------------------|
|ADIRU 1 | | | | | | | | |* | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ADIRU 2 | |* | | | | | | | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ADIRU 3 | | |* | | | | | | |* | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FMGC 1 | | |* | | | | | |* | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FMGC 2 | |* | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|DMC 1 |* | | | | | | | | | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|DMC 2 | | | | | | |* | | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|DMC 3 | | |* | | | | | |* | | | |* | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ATC 1 | | | |* | | | | | | | | | | | |* | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ATC 2 | | | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FWC 1 | | |* | | | | | |* | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FWC 2 | |* | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|CFDIU | | | |* | | | | | |* | | | | | |* | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ECU or EEC ENG 1 | | | | |* | | | | | |* | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ECU or EEC ENG 2 | | | | | |* | | | | | |* | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|SFCC 1 | | |* | | | | | |* | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|SFCC 2 | |* | | | | | |* | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FAC 1 | | |* | | | | | |* | | | | | |* | | | |
EFF :
001-050, 053-099, 34-12-00
Page 16
Config-1 Feb 01/08
R
TAI
----------------------------------------------------------------------------
| USERS | ADR 1 BUS | ADR 2 BUS | ADR 3 BUS |
| |-----------------|-----------------|-----------------|
| |1 |2 |3 |4 |5 |6 |1 |2 |3 |4 |5 |6 |1 |2 |3 |4 |5 |6 |
|--------------------------------------------------------------------------|
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FAC 2 | |* | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ELAC 1 | | |* | | | | | |* | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ELAC 2 | |* | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|SEC 1 | | |* | | | | | | | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|SEC 2 | |* | | | | | |* | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|SEC 3 | | | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|WR 1 (option PWS) | | |* | | | | | | | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|WR 2 (option PWS) | | | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|DMU (option) | |* | | | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|AOA CAPT INDICATOR | | | |* | | | | | | | | | | | | | | |
|(option) | | | | | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|AOA F/O INDICATOR | | | | | | | | | |* | | | | | | | | |
|(option) | | | | | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|GPWC (option) | | | |* | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|DMU (option) | |* | | | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|CABIN PRESSURE | | |* | | | | | | |* | | | | |* | | | |
|CONTROLLER1 | | | | | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|CABIN PRESSURE | | | |* | | | |* | | | | | | | |* | | |
|CONTROLLER2 | | | | | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ZONE TEMPERATURE | | | | | | | | | | | | | | | |* | | |
|CONTROLLER | | | | | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|TEST 1 CONNECTORS | | | |* | | | | | |* | | | | | |* | | |
----------------------------------------------------------------------------
EFF :
001-050, 053-099, 34-12-00
Page 17
Config-1 Feb 01/08
R
TAI
- The IR portion of the ADIRU provides four identical ARINC 429
High Speed buses. The system users are described in the table
below:
-----------------------------------------------------------------------------
| USERS | IR 1 BUS | IR 2 BUS | IR 3 BUS |
| |-------------------|-------------------|-------------------|
| | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 |
|---------------------------------------------------------------------------|
|FAC 1 | | | * | | | | * | | | | * | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|FAC 2 | | * | | | | * | | | | * | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|ELAC 1 | | | * | | | | * | | | | * | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|ELAC 2 | | * | | | | * | | | | * | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|SEC 1 | | | * | | | | | | | | * | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|SEC 2 | | * | | | | * | | | | | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|SEC 3 | | | | | | * | | | | * | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|DMC 1 | * | | | | | | | | | | * | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|DMC 2 | | | | | | * | | | | * | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|DMC 3 | | | * | | | | * | | * | | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|CDU | | * | | | | * | | | | * | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|FMGC 1 | | | * | | | | * | | | | * | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|FMGC 2 | | * | | | | * | | | | * | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|FQIC | | * | | | | * | | | | | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|CFDIU | | | * | | | | * | | | | * | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|GPWC (option) | | | * | | | | | | | | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|WR 1 | | | * | | | | | | | | * | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|WR 2 (option) | | | | | | * | | | | * | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|TCAS (option) | | | * | | | | | | | | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
EFF :
001-050, 053-099, 34-12-00
Page 18
Config-1 Feb 01/08
R
TAI
-----------------------------------------------------------------------------
| USERS | IR 1 BUS | IR 2 BUS | IR 3 BUS |
| |-------------------|-------------------|-------------------|
| | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 |
|---------------------------------------------------------------------------|
|GPS 1 (option) | | * | | | | | | | | | * | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|GPS 2 (option) | | | | | | | | | | | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|MMR 1 (option) | | * | | | | | * | | | | * | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|MMR 2 (option) | | | * | | | * | | | | | * | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|DMU (option) | | * | | | | | * | | | | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|RMI-VOR/DME | | * | | | | | | | | * | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|RMU-VOR/ADF/DME| | * | | | | | | | | * | | |
| (option) | | | | | | | | | | | | |
|---------------|----|----|----|----|----|----|----|----|----|----|----|----|
|TEST PLUG | | | * | | | * | | | | | * | |
-----------------------------------------------------------------------------
EFF :
001-050, 053-099, 34-12-00
Page 19
Config-1 Feb 01/08
R
TAI
(e) Analog outputs
The ADIRUs, through analog outputs, supply the ADMs with
+13.5/-13.5VDC and the CDU with 28VDC.
---------------------------------
|Lower threshold|Upper threshold|
| value | value |
--------------------------|---------------|---------------|
| LOW SPEED WARNING 1 | 100 | 104 |
| LOW SPEED WARNING 2 | 50 | 54 |
| LOW SPEED WARNING 3 | 155 | 159 |
| LOW SPEED WARNING 4 | 260 | 264 |
-----------------------------------------------------------
The LOW SPEED WARNING 1 discrete is used in the Ram Air Turbine
extension logic and in the power generation logic. The LOW SPEED
WARNING 2 discrete is used in the power generation logic.
The following discretes are used to control the CDU annunciators:
- ON BAT
- ADR OFF
- ADR FAILURE WARNING
- IR FAILURE WARNING.
- IR ALIGN
EFF :
001-050, 053-099, 34-12-00
Page 20
Config-1 Feb 01/08
R
TAI
4. _____________________
Component Description
R A. ADIRS CDU
R (Ref. Fig. 005)
R The CDU is a three-channel unit. Each CDU channel is dedicated to one
R separate ADIRU and includes the following features:
R - a three-position mode selector switch. The modes are:
R . power off (OFF)
R . navigation (NAV)
R . reversionary attitude (ATT)
R - an indicator announcing when the IR is aligning (ALIGN legend of IR
R annunciator)
R - an IR fault indicator (FAULT legend of IR annunciator)
R - a pushbutton switch to disable ADR output buses. It is a momentary
R action pushbutton switch
R - an indicator announcing when the ADR output buses are turned off (OFF
R legend of ADR pushbutton switch)
R - an ADR fault indicator (FAULT legend of ADR pushbutton switch).
R The following items of equipment are shaped between the three channels :
R - a keyboard to enter the initial position in degrees, minutes and tenth
R of minutes or magnetic heading in the attitude mode
R - two data pushbutton switches (ENT and CLR) with cue lights
R - a liquid crystal display for selected parameters. The LCD has 16 digits
R and each digit has 14 segments
R - a DATA DISPLAY selector switch to select parameters for display on the
R LCD:
R * wind (WIND)
R * present position (PPOS)
R * true heading (HDG)
R * status of selected system (STS)
R * track and ground speed (TK/GS)
R * test values (TEST)
R - a SYS DISPLAY selector switch with four positions: OFF, 1, 2, 3. The
R OFF position disables the display of the CDU but the mode control of
R the ADIRUs remains active
R - an ON BAT annunciator.
R The CDU contains three identical connectors referenced J1, J2 and J3.
R (Ref. Fig. 006)
R This LRU uses an Intel 8031 microprocessor. The CDU receives an IR bus
R from each ADIRU to display navigation data.
R It provides one bus per ADIRU to permit IR initialization.
R (Ref. Fig. 007)
R No cooling air is provided to the CDU.
R The CDU is supplied with 28VDC from the selected ADIRU to drive internal
R circuits and the data display. The 28VDC inputs are isolated from each
R other. The aircraft supplies 5VAC power for panel lighting/LCD
R backlighting and for annunciator lighting.
EFF :
001-050, 053-099, 34-12-00
Page 21
Config-1 Feb 01/08
TAI
ADIRS CDU
R Figure 005
EFF :
001-050, 053-099, 34-12-00
Page 22
Config-1 Feb 01/08
TAI
ADIRS CDU - Identical Connectors
R Figure 006
EFF :
001-050, 053-099, 34-12-00
Page 23
Config-1 Feb 01/08
TAI
ADIRS CDU - Internal Block Diagram
R Figure 007
EFF :
001-050, 053-099, 34-12-00
Page 24
Config-1 Feb 01/08
TAI
R B. ADIRU
R (Ref. Fig. 008)
(1) General
The ADIRU is contained in a 10 MCU case as defined in ARINC 600. The
ADIRU has to be aligned on a special shelf in the avionics
compartment in accordance with the installation design described in
ARINC 738. This installation involves modification of the ARINC 600
standard to include three alignment pins and a floating connector.
Pins 12 and 13 of the bottom plug have been modified with a reducer
to accept power input instead of coax input as defined in ARINC 738.
All input discretes are electrically isolated by an in-line diode or
an equivalent device. The discrete outputs are protected by means of
diodes to permit a wired OR circuit with other outputs.
The ADIRU is designed to reach a high level of protection for
lightning and Electromagnetic Interference (EMI). The lightning
protection circuitry is made up of discrete components which consist
of high-powered Zener diode type semiconductors called Transzorbs.
Varistors are used on the power supply input lines. Varistors are
voltage-controlled resistors that go to a low impedance state when a
voltage above their clamp voltage is applied, thus shunting the
lightning current.
As each ADIRU is a common point to all engines installed on the
aircraft, special care is taken to make impossible any electrical
disturbance to propagate through the ADIRU/engine interface to other
inputs/outputs dedicated to engines.
The ADIRU contains an ADR and an IR portion supplied by a common
power (115VAC, 28VDC).
(3) IR portion
R (Ref. Fig. 010)
This portion uses two different microprocessors:
- a 5301 microprocessor for the navigation computation
- a 68000 microprocessor for the ARINC I/O processing and the BITE.
It provides a high-voltage power supply used by the gyros.
The gyros/accel sensors block contains three accels and three gyros
mounted along each axis.
EFF :
001-050, 053-099, 34-12-00
Page 25
Config-1 Feb 01/08
TAI
ADIRS - General View
R Figure 008
EFF :
001-050, 053-099, 34-12-00
Page 26
Config-1 Feb 01/08
TAI
ADIRS - ADR Block Diagram
R Figure 009
EFF :
001-050, 053-099, 34-12-00
Page 27
Config-1 Feb 01/08
TAI
ADIRS - IR Block Diagram
R Figure 010
EFF :
001-050, 053-099, 34-12-00
Page 28
Config-1 Feb 01/08
TAI
The IR provides four ARINC 429 High-Speed output buses. Each bus can
drive twenty loads.
EFF :
001-050, 053-099, 34-12-00
Page 29
Config-1 Feb 01/08
R
TAI
**ON A/C ALL
_______________________________________________________
AIR DATA/INERTIAL REFERENCE SYSTEM (ADIRU & CDU OR MSU)
DESCRIPTION AND OPERATION
_________________________
1. General
_______
The Air Data/Inertial Reference System (ADIRS) provides the main air data
and heading/attitude/navigation data to the aircraft systems.
The main computers of the ADIRS are the three Air Data/Inertial Reference
Units (ADIRU) which are controlled by the ADIRS Control and Display Unit
(CDU).
The ADIRS is a three channel system. Each channel is isolated from the
others and provides independent information as defined in ARINC 738.
Each ADIRU contains:
- an Air Data Reference (ADR) portion. Its operation is described in 34-13
- an Inertial Reference (IR) portion. Its operation is described in 34-14.
Power supply is common for ADR and IR and described in 34-11.
R The Air Data/Inertial Reference System (ADIRS) provides the main air data
R and heading/attitude/navigation data to the aircraft systems.
R The main computers of the ADIRS are the three Air Data/Inertial Reference
R Units (ADIRU) which are controlled by the ADIRS Mode Selector Unit (MSU).
R The ADIRS is a three-channel system. Each channel is isolated from the
R others and provides independent information as defined in ARINC 738.
R Each ADIRU contains:
R - An Air Data Reference (ADR) portion. Its operation is described in 34-13.
R - An Inertial Reference (IR) portion. Its operation is described in 34-14.
R The power supply is common for the ADR and IR and described in 34-11.
2. __________________
Component Location
EFF :
ALL 34-12-00
Page 1
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
1FP1 ADIRU-1 127 824 34-12-34
1FP2 ADIRU-2 128 824 34-12-34
1FP3 ADIRU-3 127 824 34-12-34
2FP CDU-ADIRS 20VU 211 831 34-12-12
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 2
Config-2 Nov 01/08
TAI
ADIRS - Component Location
Figure 001
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 3
Config-2 Nov 01/08
TAI
ADIRS CDU - Component Location
Figure 002
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 4
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R L
R (Ref. Fig. 001, 002A)
R The three ADIRUs are installed in the avionics compartment.
R The ADIRS MSU is installed in the cockpit.
R -------------------------------------------------------------------------------
R FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
R | | | | DOOR | REF.
R -------------------------------------------------------------------------------
R 1FP1 ADIRU-1 127 824 34-12-34
R 1FP2 ADIRU-2 128 824 34-12-34
R 1FP3 ADIRU-3 127 824 34-12-34
R 3. ______________
Not Applicable
R
EFF :
405-499, 34-12-00
Page 5
Config-2 Nov 01/08
TAI
R ADIRS MSU - Component Location
R Figure 002A
R
EFF :
405-499, 34-12-00
Page 6
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
3. Interface
_________
A. Mechanical Interface
The ADIRUs are installed and aligned on a specific mounting tray in the
avionics compartment in accordance with the installation design defined
in ARINC 738. The ADIRU is to 4 MCU size. In order to ensure attitude and
azimuth accuracy, the mounting tray orientation complies with the
following tolerances:
- pitch and roll: plus or minus 12 minutes
- azimuth: plus or minus 12 minutes.
B. Electrical Interface
(a) General
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 7
Config-2 Nov 01/08
TAI
ADIRS CDU - Electrical Interface
Figure 003
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 8
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R B. Electrical Interface
R (a) General
R
R (Ref. Fig. 003A)
R The ADIRS MSU contains three identical connectors. Each connector
R is linked to one ADIRU by means of an insert position keying.
R The four annunciator discretes ADR OFF, ADR FAULT, IR OFF and IR
R FAULT are linked to the ADIRS MSU from the ADIRU, through the
R annunciator light test and interface boards.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 9
Config-2 Nov 01/08
TAI
R ADIRS MSU - Electrical Interface
R Figure 003A
R
EFF :
405-499, 34-12-00
Page 10
Config-2 Nov 01/08
TAI
1
_ CDU bus inputs
The CDU receives an ARINC 429 High Speed bus from the IR
portion of each ADIRU.
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 010 |PRESENT |90S-90N |DEG | | 6 | | BCD| |
| |POS LAT-D |(POSITIVE: |& | | | | | |
| | |NORTH FROM |MIN | | | | | |
| | |0 DEG) | | | | | | |
| | |RESOL = .1 | | | | | | |
|-----------------------------------------------------------------------------|
| 011 |PRESENT |180E-180W |DEG | | 6 | | BCD| |
| |POS LONG-D |(POSITIVE: |& | | | | | |
| | |EAST FROM |MIN | | | | | |
| | |0 DEG) | | | | | | |
| | |RESOL = .1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 012 |GROUND |0-2000 |Kt | | 4 | | BCD| |
| |SPEED-D |(ALWAYS | | | | | | |
| | |POSITIVE) | | | | | | |
| | |RESOL = 1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 013 |TRACK |0-359.9 |DEG | | 4 | | BCD| |
| |ANGLE TRUE |(POSITIVE: | | | | | | |
| | |CW FROM | | | | | | |
| | |NORTH) | | | | | | |
| | |RESOL = .1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 014 |MAGNETIC |0-359.9 |DEG | | 4 | | BCD| |
| |HEADING |(POSITIVE: | | | | | | |
| | |CW FROM | | | | | | |
| | |NORTH) | | | | | | |
| | |RESOL = .1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 015 |WIND SPEED |0-256 |Kt | | 3 | | BCD| |
| | |(ALWAYS | | | | | | |
| | |POSITIVE) | | | | | | |
| | |RESOL = 1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 11
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 016 |WIND DIR |0-359 |DEG | | 3 | | BCD| |
| |TRUE |(POSITIVE: | | | | | | |
| | |CW FROM | | | | | | |
| | |NORTH) | | | | | | |
| | |RESOL = 1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 044 |TRUE |0-359.9 |DEG | | 4 | | BCD| |
| |HEADING |(POSITIVE: | | | | | | |
| | |CW FROM | | | | | | |
| | |NORTH) | | | | | | |
| | |RESOL = .1 | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 270 |IR DISCRETE| | | | 19 | | DIS| |
| |(1) | | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 277 |CDU TEST | | | | 18 | | DIS| |
| |WORD (1) | | | | | | | |
|--------------|-----------|-----------|----|---|----|----|----|--------------|
| 350 |ACTION | | | | 19 | | DIS| |
| |CODE (1) | | | | | | | |
-------------------------------------------------------------------------------
CDU IR Input Labels
NOTE : (1) The complete definition of the labels 270, 277 and
____
350 is detailed in 34-14-00 Para. 2.D.(1).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 12
Config-2 Nov 01/08
TAI
2
_ CDU bus outputs
The CDU sends the parameters detailed in the following table
to the IR portion of each ADIRU:
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 041 |SET | 90S-90N |DEG | | 6 | | BCD| |
| |LATITUDE | (POSITIVE: |& | | | | | |
| | | NORTH) |MIN | | | | | |
| | | RESOL = 0.1| | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 042 |SET | 180E-180W |DEG | | 6 | | BCD| |
| |LONGITUDE | (POSITIVE: |& | | | | | |
| | | EAST) |MIN | | | | | |
| | | RESOL = 0.1| | | | | | |
|--------------|----------| -----------|----|----|----|----|----|-------------|
| 043 |SET | 0-359 |DEG | | 3 | | BCD| |
| |MAGNETIC | (POSITIVE: | | | | | | |
| |HDG | CW FROM N) | | | | | | |
| | | RESOL = 1 | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 277 |CDU TEST | | | | 19 | | DIS| |
-------------------------------------------------------------------------------
CDU Output Labels
(2) ADIRU
The ADIRU receives data and computes outputs in accordance with ARINC
738. It uses an ARINC 600 type 2 floating-connector.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 13
Config-2 Nov 01/08
TAI
NOTE : For the ADIRU 3, only two ADM input buses are used: one
____
for the total pressure data and the other for the averaged
static pressure data.
(2) ADIRU
The ADIRU receives data and computes outputs in accordance with ARINC
738. It uses an ARINC 600 type 2 floating-connector.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 14
Config-2 Nov 01/08
TAI
(Ref. 34-11), two linked to the static probe and one linked to
the pitot probe.
NOTE : For the ADIRU 3, only two ADM input buses are used: one
____
for the total pressure data and the other for the averaged
static pressure data.
R
EFF :
401-404,
211-212, 215-215, 218-299, 301-399, 34-12-00
Page 15
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R (2) ADIRU
R The ADIRU receives data and computes outputs in accordance with ARINC
R 738. It uses an ARINC 600 type-2 floating-connector.
R NOTE : For the ADIRU 3, only two ADM input buses are used: one
____
R for the total pressure data and the other one for the
R averaged static pressure data.
R
EFF :
405-499, 34-12-00
Page 16
Config-2 Nov 01/08
TAI
R **ON A/C 201-203,
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 17
Config-2 Nov 01/08
TAI
The ADIRU operates from the 115VAC/400 Hz primary power.
- 28VDC back-up
The ADIRU can operate from the 28VDC back-up power.
- 26VAC reference
The ADIRU accepts up to three 26VAC resolver reference inputs.
Only one is used for the AOA resolver.
The ADIRU provides provisions for analog inputs (two 26VAC
reference inputs, and three analog baro-correction inputs are
reserved).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-12-00
Page 18
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 19
Config-2 Nov 01/08
TAI
ADIRS - ADIRUs/SFCCs Interface
Figure 004
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 20
Config-2 Nov 01/08
TAI
This discrete indicates whether the computation must use an
average value from the two resolvers or the value of resolver 1
in priority with the second as a back-up in case of failure.
This last solution is chosen on the A/C.
- ADR ARINC the filter select:
Unused (the selection of the ADR outputs filtering is done by
the A/C ident pin programming).
- mounting position:
This indicates the orientation of the unit to the IR portion.
It is used to know where are the longitudinal and lateral axes
of the aircraft and the sign of motion measured.
- SDI:
This indicates on which side (CAPT, F/O, Standby) the ADIRU is
installed.
- CMC-CFDS message select:
The ADIRU could be installed on other A/C version. In this
case, the ADIRU selects a table of maintenance messages with a
different syntax.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 21
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R
EFF :
405-499, 34-12-00
Page 22
Config-2 Nov 01/08
TAI
R Unused (the selection of the ADR outputs filtering is done by
R the A/C ident pin programming).
R - mounting position:
R This indicates the orientation of the unit to the IR portion.
R It is used to know where are the longitudinal and lateral axes
R of the aircraft and the sign of motion measured.
R - SDI:
R This indicates on which side (CAPT, F/O, Standby) the ADIRU is
R installed.
R - CMC-CFDS message select:
R The ADIRU could be installed on other A/C version. In this
R case, the ADIRU selects a table of maintenance messages with a
R different syntax.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-12-00
Page 23
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
----------------------------------------------------------------------------
| USERS | ADR 1 BUS | ADR 2 BUS | ADR 3 BUS |
| |-----------------|-----------------|-----------------|
| |1 |2 |3 |4 |5 |6 |1 |2 |3 |4 |5 |6 |1 |2 |3 |4 |5 |6 |
|--------------------------------------------------------------------------|
|ADIRU 1 | | | | | | | | |* | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ADIRU 2 | |* | | | | | | | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ADIRU 3 | | |* | | | | | | |* | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FMGC 1 | | |* | | | | | |* | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FMGC 2 | |* | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|DMC 1 |* | | | | | | | | | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|DMC 2 | | | | | | |* | | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|DMC 3 | | |* | | | | | |* | | | |* | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|WR 1 | | | |* | | | | | | | | | | | |* | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|WR 2 (1)| | | | | | | | | |* | | | | | |* | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ATC 1 | | | |* | | | | | | | | | | | |* | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ATC 2 | | | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FWC 1 | | |* | | | | | |* | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FWC 2 | |* | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|CFDIU | | | |* | | | | | |* | | | | | |* | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ECU or EEC ENG 1 | | | | |* | | | | | |* | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 24
Config-2 Nov 01/08
TAI
----------------------------------------------------------------------------
| USERS | ADR 1 BUS | ADR 2 BUS | ADR 3 BUS |
| |-----------------|-----------------|-----------------|
| |1 |2 |3 |4 |5 |6 |1 |2 |3 |4 |5 |6 |1 |2 |3 |4 |5 |6 |
|--------------------------------------------------------------------------|
|ECU or EEC ENG 2 | | | | | |* | | | | | |* | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|SFCC 1 | | |* | | | | | |* | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|SFCC 2 | |* | | | | | |* | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FAC 1 | | |* | | | | | |* | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|FAC 2 | |* | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ELAC 1 | | |* | | | | | |* | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ELAC 2 | |* | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|SEC 1 | | |* | | | | | | | | | | | |* | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|SEC 2 | |* | | | | | |* | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|SEC 3 | | | | | | | |* | | | | | |* | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|AOA CAPT INDIC. (1)| | | |* | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|AOA F/O INDIC. (1)| | | | | | | | | |* | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|GPWC (1)| | | |* | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|DMU (1)| |* | | | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|CABIN PRESSURE | | |* | | | | | | |* | | | | |* | | | |
|CONTROLLER1 | | | | | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|CABIN PRESSURE | | | |* | | | |* | | | | | | | |* | | |
|CONTROLLER2 | | | | | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|ZONE TEMPERATURE | | | | | | | | | | | | | | | |* | | |
|CONTROLLER | | | | | | | | | | | | | | | | | | |
|--------------------|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
|TEST 1 CONNECTORS | | | |* | | | | | |* | | | | | |* | | |
----------------------------------------------------------------------------
(1) Optional system
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 25
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
-------------------------------------------------------------------------
| USERS | IR 1 BUS | IR 2 BUS | IR 3 BUS |
| |-------------------|-------------------|-------------------|
| | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 |
|-----------------------------------------------------------------------|
|FAC 1 | | | * | | | | * | | | | * | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|FAC 2 | | * | | | | * | | | | * | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|ELAC 1 | | | * | | | | * | | | | * | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|ELAC 2 | | * | | | | * | | | | * | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|SEC 1 | | | * | | | | | | | | * | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|SEC 2 | | * | | | | * | | | | | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|SEC 3 | | | | | | * | | | | * | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|DMC 1 | * | | | | | | | | | | * | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|DMC 2 | | | | | | * | | | | * | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|DMC 3 | | | * | | | | * | | * | | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|CDU | | * | | | | * | | | | * | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|FMGC 1 | | | * | | | | * | | | | * | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|FMGC 2 | | * | | | | * | | | | * | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|FQIC | | * | | | | * | | | | | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|BSCU | | * | | | | | * | | | * | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|CFDIU | | | * | | | | * | | | | * | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|GPWC (1)| | | * | | | | | | | | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|WR 1 | | | * | | | | | | | | * | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 26
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------
| USERS | IR 1 BUS | IR 2 BUS | IR 3 BUS |
| |-------------------|-------------------|-------------------|
| | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 |
|-----------------------------------------------------------------------|
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|WR 2 (1)| | | | | | * | | | | | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|TCAS (1)| | | | | | | | | | | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|DMU (1)| | * | | | | | * | | | | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|GPS 1 (1)| | * | | | | | | | | | * | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|GPS 2 (1)| | | | | * | | | | | | * | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|MMR 1 (1)| | * | | | | | * | | | | * | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|MMR 2 (1)| | | * | | | * | | | | | * | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|SDU | | | | | | | | | | | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|RMI-VOR/DME| | * | | | | | | | | * | | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|RMI-ADF (1)| | | * | | | | | | | | * | |
|-----------|----|----|----|----|----|----|----|----|----|----|----|----|
|TEST PLUG | | | * | | | * | | | | | * | |
-------------------------------------------------------------------------
(1) Optional system
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 27
Config-2 Nov 01/08
TAI
(e) Analog outputs
The ADIRUs, through analog outputs, supply the ADMs with
+13.5/-13.5VDC and the CDU with 28VDC.
---------------------------------
|Lower threshold|Upper threshold|
| value | value |
--------------------------|---------------|---------------|
| LOW SPEED WARNING 1 | 100 | 104 |
| LOW SPEED WARNING 2 | 50 | 54 |
| LOW SPEED WARNING 3 | 155 | 159 |
| LOW SPEED WARNING 4 | 260 | 264 |
-----------------------------------------------------------
The LOW SPEED WARNING 1 discrete is used in the Ram Air Turbine
extension logic and in the power generation logic. The LOW SPEED
WARNING 2 discrete is used in the power generation logic.
The following discretes are used to control the CDU annunciators:
- ON BAT
- ADR OFF
- ADR FAILURE WARNING
- IR FAILURE WARNING
- IR ALIGN.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 28
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R -------------------------------------------------------------------------
R | USERS | IR 1 BUS | IR 2 BUS | IR 3 BUS |
R | |-------------------|-------------------|-------------------|
R | | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 |
R |-----------------------------------------------------------------------|
R |FAC 1 | | | * | | | | * | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |FAC 2 | | * | | | | * | | | | * | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |ELAC 1 | | | * | | | | * | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |ELAC 2 | | * | | | | * | | | | * | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |SEC 1 | | | * | | | | | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |SEC 2 | | * | | | | * | | | | | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |SEC 3 | | | | | | * | | | | * | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |DMC 1 | * | | | | | | | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |DMC 2 | | | | | | * | | | | * | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |DMC 3 | | | * | | | | * | | * | | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |FMGC 1 | | | * | | | | * | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |FMGC 2 | | * | | | | * | | | | * | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |FQIC | | * | | | | * | | | | | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |BSCU | | * | | | | | * | | | * | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |CFDIU | | | * | | | | * | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |GPWC (1)| | | * | | | | | | | | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |WR 1 | | | * | | | | | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |WR 2 (1)| | | | | | * | | | | | | |
R
EFF :
405-499, 34-12-00
Page 29
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------
| USERS | IR 1 BUS | IR 2 BUS | IR 3 BUS |
| |-------------------|-------------------|-------------------|
| | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 |
|-----------------------------------------------------------------------|
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |TCAS (1)| | | | | | | | | | | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |DMU (1)| | * | | | | | * | | | | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |GPS 1 (1)| | * | | | | | | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |GPS 2 (1)| | | | | * | | | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |MMR 1 (1)| | * | | | | | * | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |MMR 2 (1)| | | * | | | * | | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |SDU | | | | | | | | | | | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |RMI-VOR/DME| | * | | | | | | | | * | | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |RMI-ADF (1)| | | * | | | | | | | | * | |
R |-----------|----|----|----|----|----|----|----|----|----|----|----|----|
R |TEST PLUG | | | * | | | * | | | | | * | |
R -------------------------------------------------------------------------
R (1) Optional system
EFF :
405-499, 34-12-00
Page 30
Config-2 Nov 01/08
TAI
R (e) Analog outputs
R The ADIRUs, through analog outputs, supply the ADMs with
R +13.5/-13.5 VDC.
R ---------------------------------
R |Lower threshold|Upper threshold|
R | value | value |
R --------------------------|---------------|---------------|
R | LOW SPEED WARNING 1 | 100 | 104 |
R | LOW SPEED WARNING 2 | 50 | 54 |
R | LOW SPEED WARNING 3 | 155 | 159 |
R | LOW SPEED WARNING 4 | 260 | 264 |
R -----------------------------------------------------------
R The LOW SPEED WARNING 1 discrete is used in the Ram Air Turbine
R extension logic and in the power generation logic. The LOW SPEED
R WARNING 2 discrete is used in the power generation logic.
R The following discretes are used to control the MSU annunciators:
R - ON BAT
R - ADR OFF
R - IR OFF
R - ADR FAILURE WARNING
R - IR FAILURE WARNING.
EFF :
405-499, 34-12-00
Page 31
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
4. _____________________
Component Description
A. ADIRS CDU
(Ref. Fig. 005)
The CDU is a three-channel unit. Each CDU channel includes the following
features:
- a three-position mode selector switch. The modes are:
. power off (OFF)
. navigation (NAV)
. reversionary attitude (ATT)
- an indicator announcing when the IR is aligning (ALIGN legend of IR
annunciator)
- an IR fault indicator (FAULT legend of IR annunciator)
- a pushbutton switch to disable ADR output buses. It is a momentary
action pushbutton switch
- an indicator announcing when the ADR output buses are turned off (OFF
legend of ADR pushbutton switch)
- an ADR fault indicator (FAULT legend of ADR pushbutton switch).
The following items of equipment are shaped between the three channels :
- a keyboard to enter the initial position in degrees, minutes and tenth
of minutes or magnetic heading in the attitude mode
- two data pushbutton switches (ENT and CLR) with cue lights
- a liquid crystal display for selected parameters. The LCD has 16 digits
and each digit has 14 segments
- a DATA DISPLAY selector switch to select parameters for display on the
LCD:
* wind (WIND)
* present position (PPOS)
* true heading (HDG)
* status of selected system (STS)
* track and ground speed (TK/GS)
* test values (TEST)
- a SYS DISPLAY selector switch with four positions: OFF, 1, 2, 3. The
OFF position disables the display of the CDU but the mode control of
the ADIRUs remains active
- an ON BAT annunciator.
The CDU contains three identical connectors referenced J1, J2 and J3.
(Ref. Fig. 006)
This LRU uses an Intel 8031 microprocessor. The CDU receives an IR bus
from each ADIRU to display navigation data.
It provides one bus per ADIRU to permit IR initialization.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 32
Config-2 Nov 01/08
TAI
ADIRS CDU
Figure 005
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 33
Config-2 Nov 01/08
TAI
R ADIRS MSU
R Figure 005A
EFF :
405-499, 34-12-00
Page 34
Config-2 Nov 01/08
TAI
ADIRS CDU - Identical Connectors
Figure 006
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 35
Config-2 Nov 01/08
TAI
(Ref. Fig. 007)
R A. ADIRS MSU
R (Ref. Fig. 005A)
R The MSU is a three-channel unit. Each MSU channel is dedicated to one
R separate ADIRU and includes the following features:
R - a three-position mode selector switch. The modes are:
R . power off (OFF)
R . navigation (NAV)
R . reversionary attitude (ATT)
R - a pushbutton switch to disable IR output buses. It is a momentary
R action pushbutton switch
R - an indicator announcing when the IR output buses are turned off (OFF
R legend IR pushbutton switch)
R - an IR fault indicator (FAULT legend of IR annunciator)
R - a pushbutton switch to disable ADR output buses. It is a momentary
R action pushbutton switch
R - an indicator announcing when the ADR output buses are turned off (OFF
R legend of ADR pushbutton switch)
R - an ADR fault indicator (FAULT legend of ADR pushbutton switch).
R An ON BAT annunciator is shared by the three channels.
R The MSU contains three identical connectors referenced J1, J2 and J3.
R (Ref. Fig. 006A)
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 36
Config-2 Nov 01/08
TAI
R ADIRS MSU - Identical Connectors
R Figure 006A
EFF :
405-499, 34-12-00
Page 37
Config-2 Nov 01/08
TAI
ADIRS CDU - Internal Block Diagram
Figure 007
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-12-00
Page 38
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
B. ADIRU
(Ref. Fig. 008)
(1) General
The ADIRU is contained in a 4 MCU case as defined in ARINC 600. The
ADIRU has to be aligned on a special shelf in the avionics
compartment in accordance with the installation design described in
ARINC 738. This installation involves modification of the ARINC 600
standard to include three alignment pins and a floating connector.
Pins 12 and 13 of the bottom plug have been modified with a reducer
to accept power input instead of coax input as defined in ARINC 738.
All input discretes are electrically isolated by an in-line diode or
an equivalent device. The discrete outputs are protected by means of
diodes to permit a wired OR circuit with other outputs.
The ADIRU is designed to reach a high level of protection for
lightning and Electromagnetic Interference (EMI). The lightning
protection circuitry is made up of discrete components which consist
of high-powered Zener diode type semiconductors called Transzorbs.
Varistors are used on the power supply input lines. Varistors are
voltage-controlled resistors that go to a low impedance state when a
voltage above their clamp voltage is applied, thus shunting the
lightning current.
As each ADIRU is a common point to all engines installed on the
aircraft, special care is taken to make impossible any electrical
disturbance to propagate through the ADIRU/engine interface to other
inputs/outputs dedicated to engines.
The ADIRU contains an ADR and an IR portion supplied by a common
power (115VAC, 28VDC).
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 39
Config-2 Nov 01/08
TAI
ADIRS - General View
Figure 008
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 40
Config-2 Nov 01/08
TAI
ADIRU - Block Diagram
Figure 009
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 41
Config-2 Nov 01/08
TAI
(3) IR portion
(Ref. Fig. 009)
This portion uses a 80960 microprocessor.
It provides a high-voltage power supply used by the gyros.
The gyros/accel sensors block contains three accels and three gyros
mounted along each axis.
The IR provides four ARINC 429 High-Speed output buses. Each bus can
drive twenty loads.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-00
Page 42
Config-2 Nov 01/08
TAI
CONTROL AND DISPLAY UNIT (CDU) - ADIRS (2FP) - REMOVAL/INSTALLATION
___________________________________________________________________
TASK 34-12-12-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-12-12-010-050
A. Get Access
(1) Put the access platform in position at the access door 822.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-12-12
Page 401
Nov 01/08
TAI
Subtask 34-12-12-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
4. Procedure
_________
Subtask 34-12-12-020-050
(1) Hold the CDU (4) and loosen the four quarter turn fasteners (5).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-12-12
Page 402
Nov 01/08
TAI
ADIRS - Control and Display Unit (CDU)
Figure 401/TASK 34-12-12-991-001
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-12-12
Page 403
Nov 01/08
TAI
(4) Remove the CDU (4).
(5) Put blanking caps on the disconnected electrical connectors (2) and
(3).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-12-12
Page 404
Nov 01/08
TAI
TASK 34-12-12-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-12-12-010-051
A. Get Access
(1) Make sure that the access platform is in position at the access door
822.
(3) Make sure that the protective cover is removed from the battery power
center 105VU.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-12-12
Page 405
Nov 01/08
TAI
Subtask 34-12-12-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
4. Procedure
_________
Subtask 34-12-12-420-050
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-12-12
Page 406
Nov 01/08
TAI
(3) Remove the blanking caps from the electrical connectors (2) and (3).
(4) Make sure that the electrical connectors are clean and in the correct
condition.
(5) Connect the electrical connectors (2) to the related receptacles (3).
Subtask 34-12-12-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
4FP1, 4FP2, 4FP3, 6FP1, 6FP2, 6FP3, 3LF, 26LP, 27LP, 30LP
Subtask 34-12-12-710-050
5. Close-up
________
Subtask 34-12-12-860-050
A. Make sure that the work area is clean and clear of tool(s) and other
items.
Subtask 34-12-12-410-050
B. Close Access
(1) Install the protective cover on the battery power center 105VU.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-12-12
Page 407
Nov 01/08
TAI
___________________________________________________________
REFERENCE UNIT - AIR DATA/INERTIAL (ADIRU) (1FP1,1FP2,1FP3)
____________________
REMOVAL/INSTALLATION
TASK 34-12-34-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-12-34
Page 401
Nov 01/08
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-12-34-010-050
A. Get Access
(1) Put the access platform in position at the access door 822
(4) Put the access platform in position in the zone 128 at the acces door
824
Subtask 34-12-34-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 1FP1
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
FOR 1FP2
EFF :
ALL 34-12-34
Page 402
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU ADIRS/ADIRU/2/115VAC 4FP2 N06
121VU ADIRS/ADIRU/2/28VDC 6FP2 N04
FOR 1FP3
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
4. Procedure
_________
EFF :
ALL 34-12-34
Page 403
Nov 01/08
TAI
R Air Data/Inertial Reference Unit (ADIRU)
Figure 401/TASK 34-12-34-991-002
EFF :
001-050, 053-099, 34-12-34
Page 404
Feb 01/05
TAI
Air Data/Inertial Reference Unit (ADIRU)
Figure 401A/TASK 34-12-34-991-002-A
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-12-34
Page 405
Nov 01/08
TAI
**ON A/C ALL
Subtask 34-12-34-020-050
NOTE : The procedure is the same for the three ADIRUs 1FP1, 1FP2 and
____
1FP3.
(3) Pull the ADIRU (6) on its rack (3) to disconnected the electrical
connectors (1).
EFF :
ALL 34-12-34
Page 406
May 01/00
R
TAI
TASK 34-12-34-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-12-34
Page 407
Nov 01/08
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-12-34-860-050
(1) Make sure that the access platform is in position at the access door
824.
Subtask 34-12-34-010-051
B. Get Access
(1) Make sure that the access platform is in position at the access door
822.
(3) Make sure that the protective cover is removed from the battery power
center 105VU.
Subtask 34-12-34-865-051
C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 1FP1
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
FOR 1FP2
EFF :
ALL 34-12-34
Page 408
Nov 01/07
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R **ON A/C 211-212, 215-215, 218-299, 306-399, 401-499,
FOR 1FP3
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
4. Procedure
_________
EFF :
ALL 34-12-34
Page 409
Nov 01/08
TAI
**ON A/C ALL
Subtask 34-12-34-420-050
(3) Remove the blanking caps from the electrical connectors (1).
(4) Make sure that the electrical connectors (1) are clean and in the
correct condition.
(5) Push the ADIRU (6) on its rack (3) to connect the electrical
connectors (1).
NOTE : Make sure that the ADIRU (6) correctly engages in the
____
centering pins (2).
(6) Engage the nuts (4) on the lugs (5) and tighten.
Subtask 34-12-34-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
FOR 1FP1
4FP1, 5FP1, 6FP1
FOR 1FP2
4FP2, 5FP2, 6FP2, 10FP
FOR 1FP3
4FP3, 5FP3, 6FP3, 8FP, 9FP
Subtask 34-12-34-740-050
C. BITE Test
(1) Do the BITE Test of the ADIRS (Ref. TASK 34-13-00-740-002) (Ref. TASK
34-14-00-740-001).
EFF :
ALL 34-12-34
Page 410
May 01/00
R
TAI
(2) As an alternative procedure, you can do an operational test without
the CFDS (installed ADIRU only)
5. Close-up
________
Subtask 34-12-34-860-051
(1) On the overhead panel 23VU, release and push the FLT CTL/ELAC1 and
FLT CTL/SEC1 pushbutton switches (the OFF legend comes on and goes
off).
(2) On the overhead panel 24VU, release and push the FLT CTL/ELAC2, FLT
CTL/SEC2 and FLT CTL/SEC3 pushbutton switches (the OFF legend comes
on and goes off).
(3) Make sure that the work area is clean and clear of tool(s) and other
items.
Subtask 34-12-34-410-050
B. Close Access
(2) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-12-34
Page 411
Feb 01/02
TAI
REFERENCE UNIT - AIR DATA/INERTIAL (ADIRU) (1FP1,1FP2,1FP3) - INSPECTION/CHECK
______________________________________________________________________________
TASK 34-12-34-200-001
1. __________________
Reason for the Job
To make sure that the performance parameters of the ADIRUs are satisfactory
for operation in Class II navigation airspace in the range specified in the
FAR drift rate requirement.
To do this, do a check of the ADIRUs for:
- Radial position errors
- Residual ground speed errors.
This procedure gives accurate removal criteria.
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-12-34-860-052
EFF :
ALL 34-12-34
Page 601
Feb 01/08
TAI
(3) Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).
(4) On the center pedestal, on the SWITCHING panel 8VU, make sure that
the AIR DATA selector switch is at NORM.
4. Procedure
_________
Subtask 34-12-34-740-051
NOTE : At the end of the flight, the pilot must make an entry of the RPE
____
in the logbook.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. Push the line key adjacent to the The FMGC page comes into view.
FMGC indication
2. On the keyboard, push the DATA The DATA INDEX page comes into view.
mode key
3. Push the line key adjacent to the The POSITION MONITOR page comes into
POSITION MONITOR indication view.
NOTE : This 30-minute period is the assumed time interval from the
____
end point of the ADIRU alignment and aircraft door closing
before pushback.
EFF :
ALL 34-12-34
Page 602
May 01/03
TAI
ADIRU - Radial Position Error - Removal Criteria
Figure 601/TASK 34-12-34-991-008
EFF :
ALL 34-12-34
Page 603
May 01/03
TAI
(2) Compare the recorded values with the curve at the time value
calculated.
(a) If the RPE is below the grey band (refer to AREA 1):
- the ADIRU is serviceable and no action is necessary.
(c) If the RPE is above the grey band (refer to AREA 3):
- replace the ADIRU (Ref. TASK 34-12-34-000-001) and (Ref. TASK
34-12-34-400-001).
Subtask 34-12-34-740-052
Record the residual ground speed for each IR at the end of the
flight when the aircraft is fully stopped.
(1) Record the residual ground speed on the ADIRS CDU on the overhead
panel (20VU):
- set the DATA DISPLAY selector switch to TK/GS
- set the SYS DISPLAY selector switch to 1, 2 and 3
- read the related ground speed on the ADIRS CDU display.
NOTE : You can also read the ground speed on the CAPT ND (IR1) and
____
F/O ND (IR2). To read the residual ground speed for IR3 on the
CAPT (F/O) ND, set the ATT HDG selector switch on the
SWITCHING panel (8VU) to CAPT/3 (F/O/3). But, because of DMC
processing, the ground speed value shown on the ND can be
different from the value on the ADIRS CDU by 1 Kt.
(2) Compare the recorded ground speed values with these limits:
EFF :
ALL 34-12-34
Page 604
Nov 01/08
TAI
(b) If the residual ground speed error is equal to 15 Kts or is
between 15 and 21 Kts:
- it is not necessary to replace the ADIRU but you must do a
second check of the residual ground speed error immediately
after the subsequent flight. If the value is again equal to 15
Kts or is between 15 and 21 Kts, replace the ADIRU (Ref. TASK
34-12-34-000-001) and (Ref. TASK 34-12-34-400-001);
R Subtask 34-12-34-740-052-A
R (1) Record the ground speed on the CAPT ND (IR1) and F/O ND (IR2). To
R read the residual ground speed for IR3 on the CAPT (F/O) ND, set the
R ATT HDG selector switch on the SWITCHING panel (8VU) to CAPT/3
R (F/O/3).
R (2) Compare the recorded ground speed values with these limits:
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-12-34
Page 605
Nov 01/08
TAI
R (c) If the residual ground speed error is equal to or more than 21
R Kts:
R - Replace the ADIRU (Ref. TASK 34-12-34-000-001) and (Ref. TASK
R 34-12-34-400-001).
Subtask 34-12-34-740-053
C. Drift Rate
The Drift Rate criteria are directly derived from the RPE removal
criteria, divided by the NAV TIME (T).
(Ref. Fig. 602/TASK 34-12-34-991-009)
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. Push the line key adjacent to the The FMGC page comes into view.
FMGC indication
2. On the keyboard, push the DATA The DATA INDEX page comes into view.
mode key
3. Push the line key adjacent to the The IRS MONITOR page comes into view.
IRS MONITOR indication
5. Close-up
________
Subtask 34-12-34-860-053
R
EFF :
ALL 34-12-34
Page 606
Nov 01/08
TAI
R ADIRU - Drift Rate - Removal Criteria
R Figure 602/TASK 34-12-34-991-009
EFF :
ALL 34-12-34
Page 607
May 01/06
TAI
(3) De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
EFF :
ALL 34-12-34
Page 608
Feb 01/08
TAI
MOUNT - ADIRU - REMOVAL/INSTALLATION
____________________________________
TASK 34-12-51-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-12-51-210-050
NOTE : You must keep the aircraft in this position during the removal and
____
installation procedures.
EFF :
ALL 34-12-51
Page 401
Feb 01/09
TAI
Subtask 34-12-51-020-050
B. Remove the ADIRUs 1FP1, 1FP2 and 1FP3 (Ref. TASK 34-12-34-000-001).
4. Procedure
_________
Subtask 34-12-51-020-051
(1) Remove the nuts (4), the washers (8) and the screws (7) which attach
the bonding leads (5) to the mount (13).
(3) Remove the electrical connectors (12) from the mount (13). Use some
straps to attach the electrical connectors (12).
(5) Remove the nuts (1), the washers (2) and the screws (6).
(6) Lift the mount (13) off its support. Be careful not to cause damage
to the peel shims (3) and the air conditioning pipe (9).
(7) Put marks on the peel shims (3) with a felt-tip pen or equivalent, to
make sure that you put them back in their initial positions when you
install the mount (13).
Subtask 34-12-51-020-052
R (2) Remove the filter assembly (2081HM, 2082HM, 2083HM) (Ref. TASK 21-26-
R 43-000-006).
R
EFF :
ALL 34-12-51
Page 402
Feb 01/09
TAI
ADIRU Mount
Figure 401/TASK 34-12-51-991-001
R
EFF :
ALL 34-12-51
Page 403
Aug 01/08
TAI
R (3) Remove the avionics equipment ventilation-duct (Ref. TASK 21-26-42-
000-001).
EFF :
ALL 34-12-51
Page 404
Feb 01/09
TAI
TASK 34-12-51-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
EFF :
ALL 34-12-51
Page 405
Feb 01/09
TAI
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-12-51-210-051
A. Make sure that the aircraft is in precise leveling (Ref. TASK 08-22-00-
200-001). Do this procedure to put the aircraft in position to have a 0
degree pitch and a 0 degree roll. Use the standard reference marks of the
aircraft (tolerance +/- 5 minutes).
Subtask 34-12-51-010-050
B. Get Access
(1) Make sure that the access platform is in position in the zone 126 at
the access door 822.
(3) Make sure that the two screws and the protective cover are removed
from the battery power center 105VU.
(4) Make sure that the access platform is in position in the zone 128 at
the access door 824.
EFF :
ALL 34-12-51
Page 406
Feb 01/09
TAI
Subtask 34-12-51-865-050
C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-12-51
Page 407
Nov 01/08
TAI
R **ON A/C ALL
4. Procedure
_________
Subtask 34-12-51-210-052
A. Heading Check
CAUTION : IF YOU MUST MOVE THE TOOL IN THE AIRCRAFT, BE CAREFUL NOT TO
_______
DAMAGE THE PEEL SHIMS OF THE SUPPORTS OF THE ADIRU MOUNT.
(c) Remove the flanges (6) from the pintles (1) of the nose gear.
(e) Install the support shafts (8) on the pintles (1) of the nose
gear.
(h) Assemble the three parts of the tool (11) with the bolts (9).
NOTE : The left and right parts of the tool are not
____
interchangeable. Make sure that they are installed on the
correct side.
(i) Install the tool (11) on the support shafts (8). To do this:
- tilt the top of the tool (11) forward to engage it on the
support shafts (8).
- let the tool (11) turn down until it touches the surfaces of
the ADIRU mount support.
R
EFF :
ALL 34-12-51
Page 408
Aug 01/08
TAI
Installation Platform - IRU Brackets
Figure 402/TASK 34-12-51-991-002
R
EFF :
ALL 34-12-51
Page 409
Aug 01/08
TAI
(j) Install the shim (13) between the tool (11) and the right support
shaft (8) to prevent movement in the Y-axis (Roll) direction.
(k) Install and tighten the knurled nuts (12) on each support shaft
(8).
(a) Manually push the four pins (10) into the inspection bushes of
the tool (11). The pins (10) must go easily in the attachment
holes of the ADIRU mount support.
NOTE : If it is not easy manually to push the four pins (10) into
____
the attachment holes for the ADIRU mount support, there is
a heading angle mismatch.
You must get more information from the Airbus Customer
Service.
(c) Remove the tool (11) and the shim (13) from the support shafts
(8).
(d) Remove the bolts (9) and disassemble the three parts of the tool
(11).
(g) Remove the support shafts (8) from the pintles (1) of the nose
gear.
(h) Install the new packings (7) (7) and (2) and the flanges (6) on
the pintles (1) of the nose gear.
(j) TORQUE the nuts (4) to between 1.2 and 1.35 m.daN (106.19 and
119.46 Ibf.in).
R
EFF :
ALL 34-12-51
Page 410
Aug 01/08
TAI
Subtask 34-12-51-210-053
B. Flatness Check
(Ref. Fig. 403/TASK 34-12-51-991-003)
R (1) If necessary, replace the damaged peel shims (2). Carefully clean the
R sealing bearing on the support surfaces of the ADIRU mount. Remove
R the unwanted thickness from the peel shims (2).
(5) Turn the tool (1) 180 degrees until its right angle is at position 4.
(7) Do a check to make sure that all the assembly is horizontal. If not,
go back to step (2).
Subtask 34-12-51-420-050
R (2) Install the filter assembly (2081HM, 2082HM, 2083HM) (Ref. TASK 21-
R 26-43-400-006).
EFF :
ALL 34-12-51
Page 411
Feb 01/09
TAI
Alignment Tool - ADIRU Mount
Figure 403/TASK 34-12-51-991-003
EFF :
ALL 34-12-51
Page 412
Aug 01/08
TAI
Subtask 34-12-51-420-051
(6) Install the mount (13) on the peel shims (3). Be careful not to cause
damage to the peel shims (3).
(7) Install the screws (6), the washers (2) and the nuts (1).
(8) Install the bonding leads (5), the screws (7) and the washers (8).
5. Close-up
________
Subtask 34-12-51-420-052
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
(2) Install the ADIRUs 1FP1, 1FP2 and 1FP3 (Ref. TASK 34-12-34-400-001).
EFF :
ALL 34-12-51
Page 413
Aug 01/08
TAI
AIR DATA - DESCRIPTION AND OPERATION
____________________________________
1. _______
General
The Air Data Reference (ADR) portion of the Air Data/Inertial Reference Unit
(ADIRU) provides main data sources which are air data references for the
aircraft avionics systems.
The ADR receives and processes the outputs of the Air Data Modules (ADM) and
other sensors (Ref. 34-11-00). It computes the aerodynamic parameters in the
form of ARINC 429 low speed buses.
For more details concerning the user systems, ref. 34-12-00.
2. __________________
System Description
A. ADR Operation
(1) General
The ADR software performs five basic computational elements which are
under the air data calculations as follows:
- pressure altitude functions (ALT/ALT rate)
- Mach calculation (M)
- airspeed calculation (CAS/TAS)
- temperature calculation (SAT/TAT)
- output signal processing.
Aircraft-dependent calculations are also included in the operational
software:
- static source error correction
- angle of attack (AOA)
- maximum operating speed (MMO/VMO).
The system tests include continuous in-flight monitoring and
manually-activated test modes. The in-flight monitoring includes test
of:
- input signal integrity
- input interface integrity
- memory integrity
- computational integrity
- output signal integrity.
The continuous monitoring detects and annunciates faults in the ADR
during normal operation.
Faults are stored in BITE history in Non Volatile Memory (N.V.M) and
sent to the Centralized Fault Display System (CFDS) via digital
words.
R
EFF :
001-050, 053-099, 34-13-00
Page 1
Config-1 Nov 01/00
TAI
(2) Inputs
1
_ Air Data Modules (ADM) inputs
The ADR receives three input buses from its corresponding ADM.
These buses transmit the following input data words depending
on the ADM installation:
Label 242 : Total Pressure
Label 176 : Left Static Pressure
Label 177 : Right Static Pressure
Label 245 : Averaged Static Pressure.
Each of these words is a 32-bit word with the following
format:
----------------------------------------------------------
| BIT POSITION | DATA |
----------------------------------------------------------
| 1 - 8 | Label |
| 9 - 10 | SDI |
| 11 - 28 | Pressure Value |
| 29 | Sign bit (0 = positive) |
| 30 - 31 | Status matrix |
| 32 | Parity bit |
----------------------------------------------------------
ADM Input Label
These data words are output on all eight Air Data output data
buses and used for calculation of corrected pressure data.
2
_ Flight Control Unit (FCU) inputs
The ADR receives one input bus from the FCU, for digital baro
corrections.
The FCU output bus sends:
BCD label 234 Baro Correction 1(hPa) for CAPT side
BCD label 236 Baro Correction 2(hPa) for F/O side.
Each ADR receives the two FCU output bus according to the
discrete selection as explained in Para. 2.A.(2)(c) (discrete
inputs).
Each of these words is a 32-bit BCD word with the following
format:
R
EFF :
001-050, 053-099, 34-13-00
Page 2
Config-1 Nov 01/00
TAI
-----------------------------------------------------------
| BIT POSITION | DATA |
-----------------------------------------------------------
| 1 - 8 | Label |
| 9 - 10 | SDI |
| 11 - 28 | Value |
| 29 | Sign bit |
| 30 - 31 | Status matrix |
| 32 | Parity |
-----------------------------------------------------------
FCU Input Label
3
_ Centralized Fault Display Interface Unit (CFDIU) input
For maintenance purposes, the ADR receives one input bus from
the CFDIU.
For more details, ref. 34-18-00.
4
_ Air Data Reference (ADR) input
Each ADR receives two intercommunication buses from the other
ADRs for cross channel comparison purpose.
1
_ Total Air Temperature (TAT) input
The ADR measures the resistance of the sensing element of the
TAT sensor (Ref. 34-11-00).
The ADR subtracts a fixed value (1.04 ohm) from the measured
input resistance to compensate for aircraft wiring resistance.
2
_ Angle of Attack (AOA) inputs
(Ref. Fig. 001)
The ADR receives two resolver inputs for angle of attack
computation.
The following requirements apply to the analog resolver
inputs:
- load: 15 kilohms minimum
- reference: 26V, 400 Hz (same as AOA)
- transformer ratio: 0.415 nominal plus or minus 10 %
- phase shift: 8.8 to 30 deg. leading
- source impedance:
Zro = A + jB A less than 315, B less than 725
Zso = C + jD C less than 150, D less than 165
- voltage range: 23 to 31.7 VRMS
- peak factor: 1.31 to 1.51
- electrical range input: plus or minus 60 deg.
R
EFF :
001-050, 053-099, 34-13-00
Page 3
Config-1 Nov 01/00
TAI
AOA/ADR Wiring
Figure 001
R
EFF :
001-050, 053-099, 34-13-00
Page 4
Config-1 Nov 01/00
TAI
3
_ Analog baro correction inputs.
The ADR receives three resolver inputs for analog baro
correction (from the altimeter for example).
These inputs are not used.
----------------------------------------------------------------
| INPUT SIGNAL | INPUT | INPUT DEFINITION |
----------------------------------------------------------------
| ADR ARINC Filter Select | Open/GND | Type A/Type B |
| CFDS Message Select | Open/GND | Active/Not Active |
| SDI LSB (Middle Insert) | Open/GND | 0/1 |
| SDI MSB (Middle Insert) | Open/GND | 0/1 |
| Pitot Probe Ht Disc | Open/GND | No Fault/Fault |
| Right Static Ht Disc | Open/GND | No Fault/Fault |
| Left Static Ht Disc | Open/GND | No Fault/Fault |
| TAT Ht Disc | Open/GND | Off/On |
| AOA 1 Ht Disc | Open/GND | No Fault/Fault |
| AOA Average/Unique | Open/GND | Average/Unique |
| VMO/MMO Disc 1 | Open/GND | No/Yes |
| VMO/MMO Disc 2 | Open/GND | No/Yes |
| VMO/MMO Disc 3 | Open/GND | No/Yes |
| VMO/MMO Disc 4 | Open/GND | No/Yes |
| SSEC Alternate Disc A | Open/GND | No/Yes |
| SSEC Alternate Disc B | Open/GND | N0/Yes |
| AOA Alternate Disc 1A | Open/GND | Off/On |
| AOA Alternate Disc 1B | Open/GND | Off/On |
| AOA Alternate Disc 2A | Open/GND | Off/On |
| AOA Alternate Disc 2B | Open/GND | Off/On |
| Baro Port A | Open/GND | Port B/Port A |
| Zero MACH SSEC | Open/GND | Use SSEC/Ignore SSEC |
| Zero AOA SSEC | Open/GND | Use SSEC/Ignore SSEC |
| AIR FRM ID Code 1/0 |Open/A.I.Com | No/Yes |
| AIR FRM ID Code 2/0 |Open/A.I.Com | No/Yes |
| AIR FRM ID Code 4/0 |Open/A.I.Com | No/Yes |
| AIR FRM ID Code 8/0 |Open/A.I.Com | No/Yes |
| AIR FRM ID Code 16/0 |Open/A.I.Com | No/Yes |
| AIR FRM ID Code Parity |Open/A.I.Com | No/Yes |
| ADR Remote Test | Open/GND | No Test/Test |
| ADR OFF DISCR Input | Open/GND | Released/Pressed |
| Dual Baro | Open/GND | Sgl Port/Dual Port |
| Baro Analog/Digital Sel.| Open/GND | Digital/Analog |
| Baro Corr. 3 Active | Open/GND | Not Active/Active |
----------------------------------------------------------------
R
EFF :
001-050, 053-099, 34-13-00
Page 5
Config-1 Nov 01/00
TAI
----------------------------------------------------------------
| INPUT SIGNAL | INPUT | INPUT DEFINITION |
----------------------------------------------------------------
Discrete Input Signal
1
_ ADR ARINC Filter Select discrete
This discrete is used to select the characteristics of the ADR
output filter.
Two sets of characteristics are available:
Open/Ground = Type A/Type B.
The A/C is defined with the ADR ARINC filter select discrete
open.
--------------------------------------------------------------
| | | TYPE A | TYPE B |
| OCTAL | | MAXIMUM | MAXIMUM |
| LABEL | SIGNAL | 3db FILTER | 3db FILTER |
| | | BANDWIDTH | BANDWIDTH |
| | | (HZ)(1) | (HZ) |
--------------------------------------------------------------
| 203 |Altitude | 8 | 3 |
| 204 |Baro Cor. Alt. 1 | 8 | 3 |
| 205 |Mach | 8 | 3 |
| 206 |Computed Airspeed | 8 | 3 |
| 207 |Max Allow. Airspeed | 8 | 8 |
| 210 |True Airspeed | 8 | 3 |
| 211 |Total Air Temp | 4 | 3 |
| 212 |Altitude Rate | 1.8 | 1.8 |
| 213 |Static Air Temp | 4 | 3 |
| 215 |Impact Pressure | 8 | 3 |
| 220 |Baro Cor. Alt. 2 | 8 | 3 |
| 221 |Ind. Angle of Attack | 8 | 3 |
| 241 |Cor. Angle of Attack | 8 | 3 |
| 242 |Total Pressure | N/A (2) | N/A (2) |
| 176 |Left Static Pressure | N/A (2) | N/A (2) |
| 177 |Right Static Pressure | N/A (2) | N/A (2) |
| 245 |Uncorr Avg Static Pressure| N/A (2) | N/A (2) |
R
EFF :
001-050, 053-099, 34-13-00
Page 6
Config-1 Nov 01/00
TAI
--------------------------------------------------------------
| | | TYPE A | TYPE B |
| OCTAL | | MAXIMUM | MAXIMUM |
| LABEL | SIGNAL | 3db FILTER | 3db FILTER |
| | | BANDWIDTH | BANDWIDTH |
| | | (HZ)(1) | (HZ) |
--------------------------------------------------------------
| 246 |Corr Avg Static Pressure | N/A (2) | N/A (2) |
| 251 |Baro Cor. Alt. 3 | 8 | 3 |
--------------------------------------------------------------
ADR Output Filter Characteristics
2
_ CFDS Message Select discrete
Open/Ground = CFDS message.
When open, this discrete, is used to select and display fault
messages.
3
_ Source Data Identifier (SDI) program pins
These discretes code the installation side of the ADIRU. This
item of information is used to choose the appropriate
correction laws (for Static Source Error Correction (SSEC) and
corrected angle of attack).
The following table gives the ADR side according to the SDI:
--------------------------------------------------------
| DEBOUNCED STATUS | | |
|-----------------------------| SDI | ADIRU |
| SDI-MSB | SDI-LSB | CODE | NUMBER |
|------------------------------------------------------|
| OPEN | GND | 01 | 1 |
| GND | OPEN | 10 | 2 |
| GND | GND | 11 | 3 |
--------------------------------------------------------
ADR SDI Code
4
_ sensor heat status discretes
These discrete inputs are used to provide the sensors heat
status to the ADR.
These discretes are of the open/ground type.
When the TAT HEAT DISC is grounded, the TAT sensor is heated.
When one of the STATIC, PITOT or AOA HEAT discretes is
grounded, it means that the output of the Probe Heat Computer
R
EFF :
001-050, 053-099, 34-13-00
Page 7
Config-1 Nov 01/00
TAI
(PHC) heating power supply is faulty and that the concerned
probe is no longer heated.
In this case, the ADR operates as a relay which sends these
information signals to the FWC for warning purposes.
5
_ AOA Average/Unique program pin
The ADR uses the AOA Average/Unique program pin to determine
whether one or two angle of attack resolver inputs are used
for angle of attack computations. When this program pin
indicates Unique, the ADR uses only a single angle of attack
input.
If this first AOA input fails, the ADR uses the opposite AOA
input, as shown in table below. When this program pin
indicates Average, the ADR calculates angle of attack based
on the average of the angle of attack inputs 1 and 2.
-------------------------------------------------------
| SYSTEM | INITIAL NON-FAULT | INPUT TO ADR |
| NUMBER | INPUT TO ADR | AFTER FAULT |
-------------------------------------------------------
| 1 | input number 1 | input number 2 |
| 2 | input number 2 | input number 1 |
| 3 | input number 1 | input number 2 |
-------------------------------------------------------
AOA Resolver Input
6
_ VMO/MMO Program Discretes 1 through 4
These discretes are used to select alternate VMO/MMO levels.
There are four alternates and a basic VMO/MMO for each
aircraft type. Table below defines VMO/MMO versus state of the
VMO/MMO program discretes.
With no VMO/MMO discretes in the ground state (yes) the ADR
defaults to the BASIC LAW values for VMO/MMO.
Only one of the four VMO/MMO program discretes can be in the
ground state at any one time.
If more than one VMO/MMO program discrete is in the ground
state at any one time, the ADR defaults to the lowest
available alternate condition.
7
_ on the A/C only the VMO/MMO DISC 2 is available and is
provided by the L/G DOWN VMO/MMO SELECTION switch (22FP).
R
EFF :
001-050, 053-099, 34-13-00
Page 8
Config-1 Nov 01/00
TAI
The normal position of this switch is open and it is grounded
after crew action for particular flights (ferry flight for
example).
Table below defines VMO/MMO state according to the switch
22FP.
----------------------------------------------------------
| | VMO | MMO | SWITCH |
| LAW | (kts) | (Mach) | 22FP |
----------------------------------------------------------
| BASIC | 350 | 0.82 | OPEN |
| ALT 1 | | | |
| ALT 2 | 235 | 0.60 | GROUND |
| ALT 3 | | | |
| ALT 4 | | | |
----------------------------------------------------------
VMO/MMO Selection
8
_ SSEC Alternate discrete
The ADR is provided with two Static Source Error Correction
(SSEC) data sets stored in the computer, for each SDI and each
aircraft type, one for use in normal conditions and the
other for use in alternate conditions.
With the two SSEC selection discretes open (no), the ADR
employs the normal SSEC curve for the aircraft type in which
it is installed. With the two SSEC selection discretes
grounded (yes), the ADR employs the alternate condition
curve.
9
_ AOA Alternate discrete
The ADR uses the alternate discrete inputs from the two
redundant SFCCs to select the angle of attack correction which
is appropriate for the current slat and flap settings.
Three laws are available for each aircraft type and SDI:
- the normal law is activated when all the discretes are open
- the alternate 1 law is activated when discretes 1A and 2A
are grounded
- the alternate 2 law is activated when discretes 1A, 2A, 1B
and 2B are grounded.
10
__ Baro Port A discrete
The ADR uses this discrete to select which ARINC 429 port is
used as a source for all baro-correction input data.
If this discrete is grounded, the baro port A is selected.
If this discrete is open, the baro port B is selected.
R
EFF :
001-050, 053-099, 34-13-00
Page 9
Config-1 Nov 01/00
TAI
The A/C is wired with this discrete grounded (Ref. Dual Baro
discrete).
11
__ Dual Baro discrete
The ADR uses this discrete to select which ARINC 429 port is
used as a source for all baro-correction input data.
If this discrete is grounded, the baro port A and the baro
port B are selected and the baro port A discrete selection is
overriden. If this discrete is open, the baro port A or the
baro port B is selected depending on the baro port A discrete
selection. The A/C is wired with this discrete is open.
12
__ Zero MACH SSEC discrete
The ADR uses this discrete to select the SSEC as a function of
Mach. When this program pin indicates Use SSEC (open), the
SSEC as a function of Mach is computed. When this program pin
indicates Ignore SSEC (ground), the ADR uses zero correction.
The A/C is wired with this discrete open.
13
__ Zero AOA SSEC discrete
The ADR uses this discrete to select the SSEC as a function of
angle of attack. When this program pin indicates Use SSEC
(open), the SSEC as a function of AOA is computed. When this
program pin indicates Ignore SSEC (ground), the ADR uses zero
correction.
The A/C is wired with this discrete open.
14
__ AIR FRM ID Code discrete
The ADR uses input discretes to identify the aircraft (type,
engine model) on which the ADIRU is fitted, and to select the
appropriate set of correction laws for Static Source Error
Correction (SSEC) and AOA corrections.
The ADIRU memory has the capacity to store 128 different sets
of laws.
To perform this coding, the ADR wires seven input discretes
and one discrete for parity to a common.
15
__ ADR Remote Test discrete
The ADR uses one discrete to select the remote test by
external control.
When this discrete is open, the test is not activated.
When this discrete is grounded, the test is activated.
The A/C is wired with this discrete open (unused).
The test is activated via the CFDIU (Ref. 34-18-00).
R
EFF :
001-050, 053-099, 34-13-00
Page 10
Config-1 Nov 01/00
TAI
16
__ ADR OFF DISCR input discrete
The ADR uses this discrete input to toggle its state between
ON and OFF. When the ADR is OFF, the output buses are disabled
and the ADR FAULT annunciator is inhibited whenever the
momentary action ADR pusbutton switch is pushed. When the ADR
is ON, the output buses output data and the ADR FAULT legend
operates normally. The ADR OFF DISCR input does not modify Air
Data computation.
17
__ Baro Analog/Digital Sel discrete
The ADR uses this discrete to select either the analog or
digital baro correction.
When this discrete is grounded, the analog baro correction is
selected.
When this discrete is open, the digital baro correction is
selected.
The A/C is wired with this discrete open.
18
__ Baro Corr 3 Active discrete
The ADR uses this discrete to determine for BITE purposes
whether the baro correction 3 is connected or not.
When the discrete is grounded, the baro correction 3 is
connected.
When the discrete is open, the baro correction 3 is not
connected.
The A/C is wired with this discrete open.
R
EFF :
001-050, 053-099, 34-13-00
Page 11
Config-1 Nov 01/00
TAI
(3) Acquisition and processing of the sensor inputs
R
EFF :
001-050, 053-099, 34-13-00
Page 12
Config-1 Nov 01/00
TAI
Pressure Computation - Block Diagram
Figure 002
R
EFF :
001-050, 053-099, 34-13-00
Page 13
Config-1 Nov 01/00
TAI
(b) Temperature computation
(Ref. Fig. 003)
The resistance measured by the ADR and compensated for aircraft
wiring is then converted into a temperature value (TAT) according
to the Callender-Van Dusen equation given for a 500 ohm platinum
sensing element:
- -
| 3|
Rt | (TAT ) (TAT ) (TAT ) (TAT) |
-- = 1 + a | TAT - d (--- -1) (--- ) - b (--- -1) (---) |
Ro | (100 ) (100 ) (100 ) (100) |
- -
TAT = temperature in deg.C (TAT)
Rt = Resistance at temperature TAT
Ro = Resistance at 0 deg.C = 500 ohm
a = 0.003832
d = 1.81
b = 0.1 for temperature below 0 deg.C
b = 0 for temperature above 0 deg.C
The computation also compensates the TAT value for heating
effect. The ADR knows when the sensor is heated by the state of
the TAT Heat input discrete from the PHC. The heating
compensation law is provided by the TAT sensor supplier and
varies according to Mach and air density.
The PHC 1 controls the heating of the TAT sensor 1 and the PHC 2
controls the heating of the TAT sensor 2. On the ground, the
sensors are not heated (Ref. 30-31-00 for more details).
The result of the above computation is available on the following
output labels:
- label 211 Total Air Temperature (BNR)
- label 231 Total Air Temperature (BCD).
R
EFF :
001-050, 053-099, 34-13-00
Page 14
Config-1 Nov 01/00
TAI
Temperature (TAT) Computation - Block Diagram
Figure 003
R
EFF :
001-050, 053-099, 34-13-00
Page 15
Config-1 Nov 01/00
TAI
(c) AOA computation
(Ref. Fig. 004)
The A/C is wired in the AOA unique selection, so the ADR computes
the AOA with the reading of one resolver. The second resolver is
used as a back-up. The monitoring function is described in 34.18.
The ADR determines the corrected angle of attack value which
depends on the system number and the slat/flap position.
For a CAS less than 60 kts: AOAc = 0 and status matrix is coded
NCD.
For a CAS more than or equal to 60 kts, the corrected angle of
attack is calculated as follows:
AOA ind
AOAc = ------- + I
K
where:
AOA ind = Indicated Angle of Attack (Ref. 34-11-00 for
the relation between resolver and AOA indication)
K, I = Correction coefficients which depend on system
number, slat and flap configuration and magnitude
AOA indication.
The configuration is defined by the status of four input
discretes (Ref. 2.A.(2)(c)).
The results of the above computation is available on the labels:
- label 221 = Indicated Angle of Attack
- label 241 = Corrected Angle of Attack
R
EFF :
001-050, 053-099, 34-13-00
Page 16
Config-1 Nov 01/00
TAI
SFCC/AOA - AOA Alternate Discrete Signals
Figure 004
R
EFF :
001-050, 053-099, 34-13-00
Page 17
Config-1 Nov 01/00
TAI
(4) Parameter computation
(a) General
The operational software of the ADR performs the following
computations:
- pressure altitude and pressure altitude rate function (ALT)
- Mach function (M)
- airspeed function (CAS/TAS)
- temperature function (SAT/TAT)
- maximum operating speed function (VMO/MMO).
1
_ Altitude pressure and altitude rate computation
(Ref. Fig. 005)
The altitude is derived from the corrected static pressure.
The conversion from pressure to altitude is based on the
geopotential altitude tables of the US Standard Atmosphere,
1962. The accepted range is (-2000 ft, +50,000 ft).
The altitude rate is calculated by multiplying the rate of
change of the corrected static pressure by the derivative of
altitude with respect to corrected static pressure:
dH d Ps dH
-- = ---- x ----
dt dt d Ps
2
_ Corrected altitude computation
(Ref. Fig. 006)
The ADR receives the baro correction introduced on the FCU by
each crew member. The ADR uses the values in hPa (labels 234
and 236 from the FCU).
The ADR also converts these values into inches of mercury (in.
Hg) and the result is sent on the output labels 235, 237.
The corrected altitude is calculated by a shift of the
pressure altitude to a value corresponding to the entered baro
correction. The result is sent on label 204 for CAPT baro
corrected altitude and label 220 for F/O baro corrected
altitude.
R
EFF :
001-050, 053-099, 34-13-00
Page 18
Config-1 Nov 01/00
TAI
Altitude and Altitude Rate Computation - Block Diagram
Figure 005
R
EFF :
001-050, 053-099, 34-13-00
Page 19
Config-1 Nov 01/00
TAI
Corrected Altitude Computation - Block Diagram
Figure 006
R
EFF :
001-050, 053-099, 34-13-00
Page 20
Config-1 Nov 01/00
TAI
(c) CAS/Mach computation
(Ref. Fig. 007)
The ADR software computes these different parameters:
label 206 Computed Airspeed
label 205 Mach
label 207 Maximum Allowable Airspeed.
The CAS and Mach computation is based on the conversion of the
impact pressure:
impact pressure = Pt - Ps.
- the CAS computation converts input of impact pressure to output
corresponding to computed airspeed with:
______________________
/ Qc 2/7
CAS = Cso X V 5 X ((-- + 1) - 1)
Po
CAS = Computed Airspeed in knots
Cso = Speed of sound under standard day sea level
conditions = 661.4746 kts
Qc = Impact pressure in hPa
Po = Standard day sea level pressure = 1013.25 hPa
For accuracy reason, the CAS is output with a valid (NO) SSM
only after 30 kts. If the CAS is below 30 kts, the label 206
indicates 0 kt with SSM = NCD.
- the Mach computation converts Qc/Ps to Mach, with:
_______________________
/ Qc 2/7
MACH = V 5 ((-- + 1) - 1)
Ps
MACH = Mach number
Qc/Ps = Ratio of impact pressure to static pressure
If Mach is below 0.1, the label 205 indicates 0 with SSM = NCD.
R
EFF :
001-050, 053-099, 34-13-00
Page 21
Config-1 Nov 01/00
TAI
CAS/Mach Computation - Block Diagram
Figure 007
R
EFF :
001-050, 053-099, 34-13-00
Page 22
Config-1 Nov 01/00
TAI
(d) SAT/TAS computation
(Ref. Fig. 008)
The ADR software calculates these different parameters:
label 213 BNR Static Air Temperature (SAT)
label 233 BCD Static Air Temperature (SAT)
label 210 BNR True Airspeed (TAS)
label 230 BCD True Airspeed (TAS).
- the calculation of the BNR SAT converts TAT to SAT with:
TAT
SAT = --------- - 273.15
2
1 + 0.2M
SAT = Static Air Temperature (in deg. C)
TAT = Total Air Temperature (in deg. Kelvin)
M = Mach number (corrected for static source error)
- the calculation converts Static Air Temperature from BNR to BCD
format.
- the calculation of the BNR TAS converts Mach and SAT to TAS
with:
___
/
TAS = 38.96695 x M x V SAT
TAS = True Airspeed (in knots)
M = Mach Number (corrected for Static Source Error)
SAT = Static Air Temperature (in deg. Kelvin)
- the calculation converts True Airspeed from BNR to BCD format.
For accuracy reason, the TAS is output with a valid (N.O) SSM
only after 60 kts. If TAS is below 60 kts, the label 210
indicates 0 kt with SSM = NCD.
R
EFF :
001-050, 053-099, 34-13-00
Page 23
Config-1 Nov 01/00
TAI
SAT/TAS Computation - Block Diagram
Figure 008
R
EFF :
001-050, 053-099, 34-13-00
Page 24
Config-1 Nov 01/00
TAI
VMO/MMO Computation - Block Diagram
Figure 009
R
EFF :
001-050, 053-099, 34-13-00
Page 25
Config-1 Nov 01/00
TAI
(5) ADR data outputs
The ADR data outputs are transmitted in two forms: digital and
discrete.
R
EFF :
001-050, 053-099, 34-13-00
Page 26
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 176 |L STATIC |W2048 |hPa | | 16 |125 |BNR | | |
| |PRESSURE |100 to 1100 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 177 |R STATIC |W2048 |hPa | | 16 |125 |BNR | | |
| |PRESSURE |100 to 1100 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 203 |ALTITUDE |W+/- 131072 | ft | 29 | 17 | 62 |BNR | ALT | |
| |1013.25mb |-2000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/-30 | | | | | | | |
| | |(30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 204 |BARO CORR |W+/- 131072 | ft | 29 | 17 | 62 |BNR | | |
| |ALT 1 |-2000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/-30 | | | | | | | |
| | |(30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 205 |MACH |W4096 |Mach| | 16 |125 |BNR | MN | |
| | |0.1 to 1.00 | | | | | | | |
| | |R 6.25 E-5 | | | | | | | |
| | |+/-0.010 | | | | | | | |
| | |(0.1) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 206 |COMPUTED |W1024 |Kts | | 14 |125 |BNR | CAS | |
| |AIRSPEED |30 to 450 | | | | | | | |
| | |R 0.0625 | | | | | | | |
| | |1.5 (100) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 207 |MAXIMUM |W1024 |Kts | | 12 |125 |BNR | | |
| |ALLOWABLE |150 to 450 | | | | | | | |
| |AIRSPEED |R 0.25 +/- 1| | | | | | | |
R
EFF :
001-050, 053-099, 34-13-00
Page 27
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 210 |TRUE |W2048 |Kts | | 15 |125 |BNR | | |
| |AIRSPEED |60 to 599 | | | | | | | |
| | |R 0.0625 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 211 |TOTAL AIR |W +/- 512 |Deg.| 29 | 11 |500 |BNR | TAT | |
| |TEMP |-60 to 99 |C | | | | | | |
| | |R 0.25 | | | | | | | |
| | |+/- 0.5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 212 |ALTITUDE |W+/- 32768 |ft/ | 29 | 11 | 62 |BNR | | |
| |RATE |-20,000 to |mn | | | | | | |
| | |20,000 | | | | | | | |
| | |R 16.0 | | | | | | | |
| | |+/- 30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 213 |STATIC AIR|W+/- 512 |Deg.| 29 | 11 |500 |BNR | SAT | |
| |TEMP |-99 to +80 |C | | | | | | |
| | |R 0.25 | | | | | | | |
| | |+/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 215 |IMPACT |W512 |hPa | | 14 |125 |BNR | | |
| |PRESSURE |0 to 371.5 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 220 |BARO CORR |W +/- 131072| ft | 29 | 17 | 62 |BNR | | |
| |ALT 2 |-1000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 | | | | | | | |
| | |30 (30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 221 |IND ANGLE |W +/- 180 |Deg.| 29 | 12 | 62 |BNR | | |
| |OF ATTACK |-35 to +85 | | | | | | | |
| | |R 0.0439 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
001-050, 053-099, 34-13-00
Page 28
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| 230 |TRUE |W +/- 799 |Kts | | 3 |500 |BCD | | |
| |AIRSPEED |60 to 599 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 231 |TOTAL AIR |W +/- 799 |Deg.| | 2 |500 |BCD | | |
| |TEMP |-60 to 99 |C | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 233 |STATIC AIR|W +/- 799 |Deg.| | 2 |500 |BCD | | |
| |TEMP |-99 to +80 |C | | | | | | |
| | |R 1 +/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 234 |BARO |W +/- 7999.9|hPa | | 5 |500 |BCD | | |
| |CORRECT 1 |745 to 1100 | | | | | | | |
| | |R 0.1 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 235 |BARO |W +/- 79.999|inHg| | 5 |500 |BCD | | |
| |CORRECT 1 |22.0 to 32.5| | | | | | | |
| | |R 0.001 | | | | | | | |
| | |+/- 0.0074 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 236 |BARO |W +/- 7999.9|hPa | | 5 |500 |BCD | | |
| |CORRECT 2 |745 to 1100 | | | | | | | |
| | |R 0.1 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 237 |BARO |W +/- 79.999|inHg| | 5 |500 |BCD | | |
| |CORRECT 2 |22.0 to 32.5| | | | | | | |
| | |R 0.001 | | | | | | | |
| | |+/- 0.0074 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 241 |CORRECTED |W +/- 180 |Deg.| 29 | 12 | 62 |BNR | AOA | |
| |ANGLE OF |-35 to +85 | | | | | | | |
| |ATTACK |R 0.0439 | | | | | | | |
R
EFF :
001-050, 053-099, 34-13-00
Page 29
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 242 |TOTAL |W2048 |hPa | | 16 |125 |BNR | | |
| |PRESSURE |135.5 to | | | | | | | |
| | |1354.5 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 245 |UNCRCTD |W2048 |hPa | | 16 |125 |BNR | | |
| |AVG STAT |100 to 1100 | | | | | | | |
| |PRESSURE |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 246 |CORCTD |W2048 |hPa | | 16 |125 |BNR | | |
| |AVG STAT |100 to 1100 | | | | | | | |
| |PRESSURE |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 270 |DSCT WORD | | | | |500 |DIS | | |
| | 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 271 |DSCT WORD | | | | |500 |DIS | | |
| | 2 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 272 |DSCT WORD | | | | |500 |DIS | | |
| | 3 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 350 |MAINT WORD| | | | |500 |DIS | | |
| | 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 351 |MAINT WORD| | | | |500 |DIS | | |
| | 2 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 352 |MAINT WORD| | | | |500 |DIS | | |
| | 3 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 155 |MAINT WORD| | | | |500 |DIS | | |
| | 4 | | | | | | | | |
R
EFF :
001-050, 053-099, 34-13-00
Page 30
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 356 |FAULT STAT| | | | | |ISO | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 377 |EQPT IDENT| | | | |500 |HEX | | |
-------------------------------------------------------------------------------
Output Label
--------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
--------------------------------------------------------------------------
| 11 | Icing Detector Heat | NO FAULT | FAULT |
| 12 | Pitot Probe Heat | NO FAULT | FAULT |
| 13 | ADR FAULT | FAULT | NO FAULT |
| 14 | Right Static Heat | NO FAULT | FAULT |
| 15 | Left Static Heat | NO FAULT | FAULT |
| 16 | TAT Heat | HEAT | NO HEAT |
| 17 | AOA 1 Heat | NO FAULT | FAULT |
| 18 | AOA 2 Heat | NO FAULT | FAULT |
| 19 | Overspeed Warning | WARN | NO WARN |
| 20 | Spare (Primary AOA Fault) | | |
| 21 | AOA Average/Unique | UNIQUE | AVERAGE |
| 22 | VMO/MMO 1 | YES | NO |
| 23 | VMO/MMO 2 | YES | NO |
| 24 | VMO/MMO 3 | YES | NO |
| 25 | VMO/MMO 4 | YES | NO |
| 26 | SSEC Alternate Select 1 | YES | NO |
| 27 | SSEC Alternate Select 2 | YES | NO |
| 28 | Baro Port A Select | Port A | Port B |
| 29 | Zero Mach SSEC Select | YES | NO |
--------------------------------------------------------------------------
Label 270 - Discrete Word 1
R
EFF :
001-050, 053-099, 34-13-00
Page 31
Config-1 Nov 01/00
TAI
--------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
--------------------------------------------------------------------------
| 11 | Zero AOA SSEC Select | YES | NO |
| 12 | AOA Test Active | ACTIVE | NOT ACTIVE |
| 13 | Low Speed Warning 1 | FAST | SLOW |
| 14 | Low Speed Warning 2 | FAST | SLOW |
| 15 | Low Speed Warning 3 | FAST | SLOW |
| 16 | Low Speed Warning 4 | SLOW | FAST |
| 17 | Spare | | |
| 18 | Spare | | |
| 19 | Spare | | |
| 20 | AOA Correction 1A | YES | NO |
| 21 | AOA Correction 1B | YES | NO |
| 22 | AOA Correction 2A | YES | NO |
| 23 | AOA Correction 2B | YES | NO |
|24 to 29| Spare | | |
--------------------------------------------------------------------------
Label 271 - Discrete Word 2
--------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
--------------------------------------------------------------------------
| 11 | SDI 2 | GROUND | OPEN |
| 12 | SDI 1 | GROUND | OPEN |
| 13 | Dual Baro Select | INPUT A | INPUT B |
| 14 | Analog Baro Select | YES | NO |
| 15 | Spare IDSC 1 | GROUND | OPEN |
| 16 | Spare IDSC 2 | GROUND | OPEN |
| 17 | Spare IDSC 3 | GROUND | OPEN |
| 18 | Baro 3 Present | PRESENT | ABSENT |
| 19 | Spare IDSC 4 | GROUND | OPEN |
| 20 | CFDS Select | NOT ACTI.| ACTIVE |
| 21 | ADR Filter Select | FILTERED | NOT |
| 22 | BITE Memory Clear Enable | ENABLE | DISABLE |
| 23 | BITE Write Inhibit | INHIBIT | ENABLE |
| 24 | ADR Interface Test | TEST | NORMAL |
| 25 | ADR Off Command | GROUND | OPEN |
| 26 | Reserved | | |
| 27 | ADR On/Off Status | ON | OFF |
| 28 | Spare | | |
| 29 | Spare | | |
--------------------------------------------------------------------------
Label 272 - Discrete Word 3
R
EFF :
001-050, 053-099, 34-13-00
Page 32
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
-------------------------------------------------------------------------
| 11 | A/C ID Code 32/0 | GROUND | OPEN |
| 12 | A/C ID Code 64/0 | GROUND | OPEN |
|13 to 23| Spare | | |
| 24 | A/C ID Code 1/0 | GROUND | OPEN |
| 25 | A/C ID Code 2/0 | GROUND | OPEN |
| 26 | A/C ID Code 4/0 | GROUND | OPEN |
| 27 | A/C ID Code 8/0 | GROUND | OPEN |
| 28 | A/C ID Code 16/0 | GROUND | OPEN |
| 29 | A/C ID Parity | GROUND | OPEN |
-------------------------------------------------------------------------
Label 352 - Discrete Word 4
-------------------------------------------------------------------------
| BIT N⁰ | FUNCTION |
-------------------------------------------------------------------------
| 11 | = 0 -- |
| 12 | = 1 | LSD = 6 |
| 13 | = 1 | |
| 14 | = 0 -- |
| 15 | = 0 -- |
| 16 | = 0 | MSD = 0 |
| 17 | = 0 | |
| 18 | = 0 -- |
|19 to 29| Spare |
-------------------------------------------------------------------------
Label 377 - Equipment Ident
EFF :
001-050, 053-099, 34-13-00
Page 33
Config-1 Aug 01/07
TAI
- On the ground the output labels are in the following state:
--------------------------------------------------------------------------
| LABEL | PARAMETER DEFINITION | SSM | ON GND CRITERION |
|-------------------------------------------------------------------------
| 203 | Altitude | NO | |
| 204 | Baro Corr Alt 1 | NO | |
| 220 | Baro Corr Alt 2 | NO | |
| 251 | Baro Corr Alt 3 | NO | |
| 205 | Mach | NCD | 0 Mach less than 0.1 |
| 206 | Computed Airspeed | NCD | 0 kt CAS less than 30 kts |
| 207 | Max Allowable Airspeed | NO | |
| 210 | True Airspeed | NCD | 0 kt CAS less than 60 kts |
| 211 | Total Air Temp | NO | |
| 212 | Altitude Rate | NO | |
| 213 | Static Air Temp | NO | |
| 215 | Impact Pressure | NO | |
| 221 | Indicated AOA | NCD | NOTE CAS less than 60 kts |
| 230 | True Airspeed | NCD | 0 kt CAS less than 60 kts |
| 231 | Total Air Temp | NO | |
| 233 | Static Air Temp | NO | |
| 234 | Baro Corr (hPa) 1 & 2 & 3| NO | NOTE Baro correction and |
| 236 | Baro Corr (hPa) 2 | NO | Baro altitude are |
| 034 | Baro Corr (hPa) 3 | NO | initialized to NCD. These |
| 235 | Baro Corr (in.Hg) 1 | NO | labels are coded NO for a |
| 237 | Baro Corr (in.Hg) 2 | NO | few seconds at power up |
| 035 | Baro corr (in.Hg) 3 | NO | |
| 241 | Corrected AOA | NCD | 0⁰ CAS less than 60 kts |
| 242 | Total Pressure | NO | |
| 176 | L. Static Pressure | NO | |
| 177 | R. Static Pressure | NO | |
| 245 | Uncrctd Avg Stat Pressure| NO | |
| 246 | Corctd Avg Stat Pressure | NO | |
| 155 | Discrete words | NO | |
| 270 | Discrete words | NO | |
| 271 | Discrete words | NO | |
| 272 | Discrete words | NO | |
| 350 | Discrete words | NO | |
| 351 | Discrete words | NO | |
| 352 | Discrete words | NO | |
| 377 | Discrete words | NO | |
| 356 | Fault Status | N/A | N/A |
--------------------------------------------------------------------------
Output Label Value on Ground
R
EFF :
001-050, 053-099, 34-13-00
Page 34
Config-1 Aug 01/07
TAI
R
--------------------------------------------------------------------------
| SIGNAL | PIN | OUTPUT | DEFINITION |
|------------------------------|------------|-------------|--------------|
| ADR OFF Light | TP- 4E | OPEN/GROUND | ON/OFF |
| ADR FAULT | TP- 4D | OPEN/GROUND | NO/FAULT |
| Low Speed Warning Discrete 1 | TP- 2F | OPEN/GROUND | SLOW/FAST |
| Low Speed Warning Discrete 2 | TP- 2G | OPEN/GROUND | SLOW/FAST |
| Low Speed Warning Discrete 3 | TP- 6F | OPEN/GROUND | SLOW/FAST |
| Low Speed Warning Discrete 4 | TP-13H | OPEN/GROUND | FAST/SLOW |
| AOA Special Test | TP-12G | OPEN/28VDC | NO/TEST |
--------------------------------------------------------------------------
ADR - Discrete Output Signals
NOTE : The ADR OFF light, the low speed warning 4 and ADR FAULT
____
discretes are forced to the ground state when the watchdog
timer (WDT) has timed out.
1
_ ADR OFF Light
When the ADR is commanded OFF it issues a ground state to the
ADR OFF light discrete to enable the legend to come on.
2
_ ADR FAULT
When an ADR FAULT is detected the ADR issues a ground state to
the ADR FAULT discrete to enable the legend to come on.
3
_ Low speed warning discretes 1, 2, 3, 4
The ADR provides four standard Open/Ground low speed-warning
output discretes.
- Airspeed conditions
Airspeed decreasing
Discrete 1 = OPEN for Airspeed less than or equal to 100
knots
Discrete 2 = OPEN for Airspeed less than or equal to 50
knots
Discrete 3 = OPEN for Airspeed less than or equal to 155
knots
Discrete 4 = GROUND for Airspeed less than or equal to 260
knots
Airspeed increasing
Discrete 1 = GROUND for Airspeed greater than 104 knots
Discrete 2 = GROUND for Airspeed greater than 54 knots
EFF :
001-050, 053-099, 34-13-00
Page 35
Config-1 Aug 01/07
TAI
Discrete 3 = GROUND for Airspeed greater than 159 knots
Discrete 4 = OPEN for Airspeed greater than 264 knots
- Power off conditions
Discrete 1 = OPEN
Discrete 2 = OPEN
Discrete 3 = OPEN
Discrete 4 = OPEN
- CAS detected failure condition
Discrete 1 = previous state
Discrete 2 = previous state
Discrete 3 = previous state
Discrete 4 = OPEN
4
_ AOA special test
The ADR provides an OPEN/GROUND output discrete to drive the
AOA self-test.
The AOA self-test is commanded via the CFDIU interface bus.
When the AOA test is active, the AOA sensor is offset to +15
deg. (plus or minus 1 deg.). All AOA dependent parameters
reflect this offset and their SSMs indicate Functional Test
(FT).
The RETURN/TEST STOP command from the MCDU results in the
discrete output set to OPEN.
Ref. 34-18-00 for more details.
EFF :
001-050, 053-099, 34-13-00
Page 36
Config-1 Aug 01/07
R
TAI
the ADR FAULT discrete to enable the legend to come on.
3
_ Low speed warning discretes 1, 2, 3, 4
The ADR provides four standard Open/Ground low speed-warning
output discretes.
- Airspeed conditions
Airspeed decreasing
Discrete 1 = OPEN for Airspeed less than or equal to 100
knots
Discrete 2 = OPEN for Airspeed less than or equal to 50
knots
Discrete 3 = OPEN for Airspeed less than or equal to 155
knots
Discrete 4 = GROUND for Airspeed less than or equal to 260
knots
Airspeed increasing
Discrete 1 = GROUND for Airspeed greater than 104 knots
Discrete 2 = GROUND for Airspeed greater than 54 knots
Discrete 3 = GROUND for Airspeed greater than 159 knots
Discrete 4 = OPEN for Airspeed greater than 264 knots
- Power off conditions
EFF :
001-050, 053-099, 34-13-00
Page 37
Config-1 Feb 01/08
R
TAI
Discrete 2 = OPEN
Discrete 3 = OPEN
Discrete 4 = OPEN
- CAS detected failure condition
Discrete 1 = previous state
Discrete 2 = previous state
Discrete 3 = previous state
Discrete 4 = OPEN
4
_ AOA special test
The ADR provides an OPEN/GROUND output discrete to drive the
AOA self-test.
The AOA self-test is commanded via the CFDIU interface bus.
When the AOA test is active, the AOA sensor is offset to +15
deg. (plus or minus 1 deg.). All AOA dependent parameters
reflect this offset and their SSMs indicate Functional Test
(FT).
The RETURN/TEST STOP command from the MCDU results in the
discrete output set to OPEN.
Ref. 34-18-00 for more details.
EFF :
001-050, 053-099, 34-13-00
Page 38
Config-1 Feb 01/08
R
TAI
3. ________________________________
Operation/Control and Indicating
R A. Control
R B. Indicating
Altitude (ALT), Computed Airspeed (CAS), Mach number (M) and Vertical
Speed (V/S) are computed by the ADIRU (ADR portion), processed by the
associated DMC and displayed on the PFDs.
True Airspeed (TAS) is supplied in the same way but is displayed on the
NDs.
In normal configuration, with the AIR DATA selector switch in NORM
position, the ADR 1 displays information on CAPT PFD and ND. The ADR 2
displays information on F/O PFD and ND.
Static Air Temperature (SAT) and Total Air Temperature (TAT) are also
supplied in the same way but are permanently displayed on the lower part
of the lower ECAM DU.
R These items of information are displayed by the ADR 2 when EIS1 is
R installed, by ADR1 when EIS2 is installed.
EFF :
001-050, 053-099, 34-13-00
Page 39
Config-1 Feb 01/08
TAI
ADR Control on CDU
R Figure 010
EFF :
001-050, 053-099, 34-13-00
Page 40
Config-1 Feb 01/08
TAI
Computed Airspeed and Mach Indication Display
R Figure 011
EFF :
001-050, 053-099, 34-13-00
Page 41
Config-1 Feb 01/08
TAI
The displayed part of the scale represents an 84 kts range. The
scale is graduated from 30 kts to 520 kts and the digital values
from 40 to 520 kts (item A).
In no case can the displayed CAS be lower than 30 kts.
In case of computed airspeed failure, the speed scale goes out of
view and is replaced by a red SPD flag (item B).
EFF :
001-050, 053-099, 34-13-00
Page 42
Config-1 Feb 01/08
TAI
Altitude Indication Display
R Figure 012
EFF :
001-050, 053-099, 34-13-00
Page 43
Config-1 Feb 01/08
TAI
Vertical Speed Indication Display
R Figure 013
EFF :
001-050, 053-099, 34-13-00
Page 44
Config-1 Feb 01/08
TAI
- a fixed white scale with 500 ft/mn spaced marks from -2000
ft/mn to +2000 ft/mn
- a needle giving, in analog form the actual vertical speed value
- a number in a moving amber window. This window accompanies the
needle (above the needle if V/S > 0, below if V/S < 0).
The number gives the V/S value in hundreds of ft/mn.
Between -200 ft/mn and +200 ft/mn, both the window and the
number disappear.
- above +6000 ft/mn (or below -6000 ft/mn), the needle remains
stopped where it is.
When the vertical speed exceeds +6000 ft/mn or -6000 ft/mn, the
digital indication and the analog needle change from green to
amber.
In addition, those indications change to amber in approach, in
the following cases:
- V/S less than -2000 ft/mn below 2500 ft RA
- V/S less than -1200 ft/mn below 1000 ft RA.
In case of a failure warning, the vertical speed scale is removed
and replaced by a red V/S flag which flashes for a few seconds,
then remains steady (item B).
(2) ND display
R (Ref. Fig. 014)
The true airspeed (TAS) is displayed on the ND in ROSE, ARC and PLAN
mode (item A).
The TAS information is displayed by a numerical indication of three
digits preceded by TAS indication. This information is displayed in
the left upper corner of the ND for speed higher than 100 kts. Below
this value TAS indication remains visible but is followed by three
dashes (item B).
EFF :
001-050, 053-099, 34-13-00
Page 45
Config-1 Feb 01/08
TAI
True Airspeed Indication Display
R Figure 014
EFF :
001-050, 053-099, 34-13-00
Page 46
Config-1 Feb 01/08
TAI
TAT/SAT Indication Display
R Figure 015
EFF :
001-050, 053-099, 34-13-00
Page 47
Config-1 Feb 01/08
TAI
In case of loss of TAT/SAT parameters on the lower ECAM DU, the ADR 3
can be used as a back up source by placing the AIR DATA selector
R switch in F/O/3 position when EIS 1 is installed, in CAPT/3 position
R when EIS 2 is installed.
R C. Warnings
In addition to the AIR DATA flags displayed on the PFDs and NDs and on
the CDU, warning messages are displayed on the lower part of the upper
ECAM DU.
Two kinds of warning messages can be displayed:
- failure warning messages in case of loss of AIR DATA parameters
- configuration warning messages in case of dangerous configuration of
the aircraft.
When the CLR key is pushed on the ECAM control panel, a STATUS page is
displayed on the lower ECAM DU and indicates the STATUS and INOP SYS
(systems).
EFF :
001-050, 053-099, 34-13-00
Page 48
Config-1 Feb 01/08
TAI
NAV ADR 1(2)(3) FAULT Message
R Figure 016
EFF :
001-050, 053-099, 34-13-00
Page 49
Config-1 Feb 01/08
TAI
NAV ADR 1+3 (2+3) FAULT Message
R Figure 017
EFF :
001-050, 053-099, 34-13-00
Page 50
Config-1 Feb 01/08
TAI
NAV ADR 1 + 2 FAULT Message
R Figure 018
R
EFF :
001-050, 053-099, 34-13-00
Page 51
Config-1 Feb 01/08
TAI
NAV ALTI DISCREPANCY Message
R Figure 019
R
EFF :
001-050, 053-099, 34-13-00
Page 52
Config-1 Feb 01/08
TAI
OVERSPEED VMO/MMO Message
R Figure 020
EFF :
001-050, 053-099, 34-13-00
Page 53
Config-1 Feb 01/08
TAI
OVERSPEED VFE/VLE Message
R Figure 021
R
EFF :
001-050, 34-13-00
Page 54
Config-1 Feb 01/08
TAI
R **ON A/C 053-099,
EFF :
001-050, 053-099, 34-13-00
Page 55
Config-1 Feb 01/08
TAI
OVERSPEED VFE/VLE Message
R Figure 021A
EFF :
053-099, 34-13-00
Page 56
Config-1 Feb 01/08
TAI
Stall Warning Message
R Figure 022
EFF :
001-050, 053-099, 34-13-00
Page 57
Config-1 Feb 01/08
TAI
AIR DATA - DESCRIPTION AND OPERATION
____________________________________
1. _______
General
The Air Data Reference (ADR) portion of the Air Data/Inertial Reference Unit
(ADIRU) provides main data sources which are air data references for the
aircraft avionics systems.
The ADR receives and processes the outputs of the Air Data Modules (ADM) and
other sensors (Ref. 34-11-00). It computes the aerodynamic parameters in the
form of ARINC 429 low speed buses.
For more details concerning the user systems, ref. 34-12-00.
2. __________________
System Description
A. ADR Operation
(1) General
The ADR software performs five basic computational elements which are
under the air data calculations as follows:
- pressure altitude functions (ALT/ALT rate)
- Mach calculation (M)
- airspeed calculation (CAS/TAS)
- temperature calculation (SAT/TAT)
- output signal processing.
Aircraft-dependent calculations are also included in the operational
software:
- static source error correction
- angle of attack (AOA)
- maximum operating speed (MMO/VMO).
The system tests include continuous in-flight monitoring and
manually-activated test modes. The in-flight monitoring includes test
of:
- input signal integrity
- input interface integrity
- memory integrity
- computational integrity
- output signal integrity.
The continuous monitoring detects and annunciates faults in the ADR
during normal operation.
Faults are stored in BITE history in Non Volatile Memory (NVM) and
sent to the Centralized Fault Display System (CFDS) via digital
words.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 1
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-230, 301-313, 401-404,
(2) Inputs
1
_ Air Data Modules (ADM) inputs
R The ADR receives three input buses from its corresponding ADM.
R These buses transmit the following input data words depending
on the ADM installation:
Label 242 : Total Pressure
Label 176 : Left Static Pressure
Label 177 : Right Static Pressure
Label 245 : Averaged Static Pressure
Each of these words is a 32-bit word with the following
format:
----------------------------------------------------------
| BIT POSITION | DATA |
----------------------------------------------------------
| 1 - 8 | Label |
| 9 - 10 | SDI |
| 11 - 28 | Pressure Value |
| 29 | Sign bit (0 = positive) |
| 30 - 31 | Status matrix |
| 32 | Parity bit |
----------------------------------------------------------
ADM Input Label
These data words are output on all eight Air Data output data
buses and used for calculation of corrected pressure data.
2
_ Flight Control Unit (FCU) inputs
The ADR receives one input bus from the FCU, for digital baro
corrections.
The FCU output bus sends:
BCD label 234 Baro Correction 1(hPa) for CAPT side
BCD label 236 Baro Correction 2(hPa) for F/O side.
Each ADR receives the two FCU output bus according to the
discrete selection as explained in Para. 2.A.(2)(c) (discrete
inputs).
Each of these words is a 32-bit BCD word with the following
format:
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-13-00
Page 2
Config-2 Nov 01/08
TAI
-----------------------------------------------------------
| BIT POSITION | DATA |
-----------------------------------------------------------
| 1 - 8 | Label |
| 9 - 10 | SDI |
| 11 - 28 | Value |
| 29 | Sign bit |
| 30 - 31 | Status matrix |
| 32 | Parity |
-----------------------------------------------------------
FCU Input Label
3
_ Centralized Fault Display Interface Unit (CFDIU) input
For maintenance purposes, the ADR receives one input bus from
the CFDIU.
For more details, ref. 34-18-00.
4
_ Air Data Reference (ADR) input
Each ADR receives two intercommunication buses from the other
ADRs for cross channel comparison purpose.
(2) Inputs
1
_ Air Data Modules (ADM) inputs
The ADR receives three input bus from its corresponding ADM.
These buses transmit the following input data words depending
on the ADM installation:
Label 242 : Total Pressure
Label 176 : Left Static Pressure
Label 177 : Right Static Pressure
Label 245 : Averaged Static Pressure
Each of these words is a 32-bit word with the following
format:
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 3
Config-2 Nov 01/08
TAI
----------------------------------------------------------
| BIT POSITION | DATA |
----------------------------------------------------------
| 1 - 8 | Label |
| 9 - 10 | SDI |
| 11 - 28 | Pressure Value |
| 29 | Sign bit (0 = positive) |
| 30 - 31 | Status matrix |
| 32 | Parity bit |
----------------------------------------------------------
ADM Input Label
These data words are output on all eight Air Data output data
buses and used for calculation of corrected pressure data.
2
_ Flight Control Unit (FCU) inputs
The ADR receives two input buses from the FCU; one for digital
baro corrections and one for altimeter modes.
The FCU output bus which corresponds to the CAPT side is only
connected to ADIRU1 and ADIRU3, and it sends:
* BCD label 234 Baro Correction 1(hPa)
* Discrete label 272 Altimeter mode from
Barometric Bus B, FCU EIS Disc 1.
The FCU output bus which corresponds to the F/O side is only
connected to ADIRU2, and it sends:
* BCD label 236 Baro Correction 2(hPa)
* Discrete label 272 Altimeter mode from
Barometric Bus A, FCU EIS Disc 1.
Each ADR receives the two FCU output bus according to the
discrete selection as explained in Para. 2.A.(2)(c) (discrete
inputs).
Each of these words is a 32-bit BCD word with the following
format:
-----------------------------------------------------------
| BIT POSITION | DATA |
-----------------------------------------------------------
| 1 - 8 | Label |
| 9 - 10 | SDI |
| 11 - 28 | Value |
| 29 | Sign bit |
| 30 - 31 | Status matrix |
| 32 | Parity |
-----------------------------------------------------------
FCU Input Label
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 4
Config-2 Nov 01/08
TAI
The Altimeter mode is coded on the label 272 according to the
following format:
-----------------------------------------
| Altimeter Mode | Label 272 Bits |
| | 29 - 28 |
|------------------|--------------------|
| STD | 0 1 |
| QNH | 1 0 |
| QFE | 0 0 |
| INVALID | 1 1 |
-----------------------------------------
3
_ Centralized Fault Display Interface Unit (CFDIU) input
For maintenance purposes, the ADR receives one input bus from
the CFDIU.
For more details, ref. 34-18-00.
4
_ Air Data Reference (ADR) input
Each ADR receives two intercommunication buses from the other
ADRs for cross channel comparison purpose.
1
_ Total Air Temperature (TAT) input
The ADR measures the resistance of the sensing element of the
TAT sensor (Ref. 34-11-00).
The ADR subtracts a fixed value (1.04 ohm) from the measured
input resistance to compensate for aircraft wiring resistance.
2
_ Angle of Attack (AOA) inputs
(Ref. Fig. 001)
The ADR receives two resolver inputs for angle of attack
computation.
The following requirements apply to the analog resolver
inputs:
- load: 15 kilohms minimum
- reference: 26V, 400 Hz (same as AOA)
- transformer ratio: 0.415 nominal plus or minus 10 %
- phase shift: 8.8 to 30 deg. leading
- source impedance:
Zro = A + jB A less than 315, B less than 725
Zso = C + jD C less than 150, D less than 165
- voltage range: 23 to 31.7 VRMS
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 5
Config-2 Nov 01/08
TAI
AOA/ADR Wiring
Figure 001
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 6
Config-2 Nov 01/08
TAI
- peak factor: 1.31 to 1.51
- electrical range input: plus or minus 60 deg.
3
_ Analog baro correction inputs
The ADR receives three resolver inputs for analog baro
correction (from the altimeter for example).
These inputs are not used.
----------------------------------------------------------------
| INPUT SIGNAL | INPUT | INPUT DEFINITION |
----------------------------------------------------------------
| ADR ARINC Filter Select | Open/GND | Type A/Type B |
| CFDS Message Select | Open/GND | Active/Not Active |
| SDI LSB (Middle Insert) | Open/GND | 0/1 |
| SDI MSB (Middle Insert) | Open/GND | 0/1 |
| Pitot Probe Ht Disc | Open/GND | No Fault/Fault |
| Right Static Ht Disc | Open/GND | No Fault/Fault |
| Left Static Ht Disc | Open/GND | No Fault/Fault |
| TAT Ht Disc | Open/GND | Off/On |
| AOA 1 Ht Disc | Open/GND | No Fault/Fault |
| AOA Average/Unique | Open/GND | Average/Unique |
| VMO/MMO Disc 1 | Open/GND | No/Yes |
| VMO/MMO Disc 2 | Open/GND | No/Yes |
| VMO/MMO Disc 3 | Open/GND | No/Yes |
| VMO/MMO Disc 4 | Open/GND | No/Yes |
| SSEC Alternate Disc A | Open/GND | No/Yes |
| SSEC Alternate Disc B | Open/GND | N0/Yes |
| AOA Alternate Disc 1A | Open/GND | Off/On |
| AOA Alternate Disc 1B | Open/GND | Off/On |
| AOA Alternate Disc 2A | Open/GND | Off/On |
| AOA Alternate Disc 2B | Open/GND | Off/On |
| Baro Port A | Open/GND | Port B/Port A |
| Zero MACH SSEC | Open/GND | Use SSEC/Ignore SSEC |
| Zero AOA SSEC | Open/GND | Use SSEC/Ignore SSEC |
| AIR FRM ID Code 1/0 |Open/A.I.Com | No/Yes |
| AIR FRM ID Code 2/0 |Open/A.I.Com | No/Yes |
| AIR FRM ID Code 4/0 |Open/A.I.Com | No/Yes |
| AIR FRM ID Code 8/0 |Open/A.I.Com | No/Yes |
| AIR FRM ID Code 16/0 |Open/A.I.Com | No/Yes |
| AIR FRM ID Code Parity |Open/A.I.Com | No/Yes |
| ADR Remote Test | Open/GND | No Test/Test |
| ADR OFF DISCR Input | Open/GND | Released/Pressed |
| Dual Baro | Open/GND | Sgl Port/Dual Port |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 7
Config-2 Nov 01/08
TAI
----------------------------------------------------------------
| INPUT SIGNAL | INPUT | INPUT DEFINITION |
----------------------------------------------------------------
| Baro Analog/Digital Sel.| Open/GND | Digital/Analog |
| Baro Corr. 3 Active | Open/GND | Not Active/Active |
----------------------------------------------------------------
Discrete Input Signal
1
_ ADR ARINC Filter Select discrete
This discrete is used to select the characteristics of the ADR
output filter.
Two sets of characteristics are available:
Open/Ground = Type A/Type B
The A/C is defined with the ADR ARINC filter select discrete
open.
--------------------------------------------------------------
| | | TYPE A | TYPE B |
| OCTAL | | MAXIMUM | MAXIMUM |
| LABEL | SIGNAL | 3db FILTER | 3db FILTER |
| | | BANDWIDTH | BANDWIDTH |
| | | (HZ)(1) | (HZ) |
--------------------------------------------------------------
| 203 |Altitude | 8 | 3 |
| 204 |Baro Cor. Alt. 1 | 8 | 3 |
| 205 |Mach | 8 | 3 |
| 206 |Computed Airspeed | 8 | 3 |
| 207 |Max Allow. Airspeed | 8 | 8 |
| 210 |True Airspeed | 8 | 3 |
| 211 |Total Air Temp | 4 | 3 |
| 212 |Altitude Rate | 1.8 | 1.8 |
| 213 |Static Air Temp | 4 | 3 |
| 215 |Impact Pressure | 8 | 3 |
| 220 |Baro Cor. Alt. 2 | 8 | 3 |
| 221 |Ind. Angle of Attack | 8 | 3 |
| 241 |Cor. Angle of Attack | 8 | 3 |
| 242 |Total Pressure | N/A (2) | N/A (2) |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 8
Config-2 Nov 01/08
TAI
--------------------------------------------------------------
| | | TYPE A | TYPE B |
| OCTAL | | MAXIMUM | MAXIMUM |
| LABEL | SIGNAL | 3db FILTER | 3db FILTER |
| | | BANDWIDTH | BANDWIDTH |
| | | (HZ)(1) | (HZ) |
--------------------------------------------------------------
| 176 |Left Static Pressure | N/A (2) | N/A (2) |
| 177 |Right Static Pressure | N/A (2) | N/A (2) |
| 245 |Uncorr Avg Static Pressure| N/A (2) | N/A (2) |
| 246 |Corr Avg Static Pressure | N/A (2) | N/A (2) |
| 251 |Baro Cor. Alt. 3 | 8 | 3 |
--------------------------------------------------------------
ADR Output Filter Characteristics
2
_ CFDS Message Select discrete
When open, this discrete is used to select and display fault
messages.
3
_ Source Data Identifier (SDI) program pins
These discretes code the installation side of the ADIRU. This
item of information is used to choose the appropriate
correction laws (for Static Source Error Correction (SSEC) and
corrected angle of attack).
The following table gives the ADR side according to the SDI:
--------------------------------------------------------
| DEBOUNCED STATUS | | |
|-----------------------------| SDI | ADIRU |
| SDI-MSB | SDI-LSB | CODE | NUMBER |
|------------------------------------------------------|
| OPEN | GND | 01 | 1 |
| GND | OPEN | 10 | 2 |
| GND | GND | 11 | 3 |
--------------------------------------------------------
ADR SDI Code
4
_ sensor heat status discretes
These discrete inputs are used to provide the sensors heat
status to the ADR.
These discretes are of the open/ground type.
When the TAT HEAT DISC is grounded, the TAT sensor is heated.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 9
Config-2 Nov 01/08
TAI
When one of the STATIC, PITOT or AOA HEAT discretes is
grounded, it means that the output of the Probe Heat Computer
(PHC) heating power supply is faulty and that the concerned
probe is no longer heated.
In this case the ADR operates as a relay which sends these
information signals to the FWC for warning purposes.
5
_ AOA Average/Unique program pin
The ADR uses the AOA Average/Unique program pin to determine
whether one or two angle of attack resolver inputs are used
for angle of attack computations. When this program pin
indicates Unique, the ADR uses only a single angle of attack
input.
If this first AOA input fails, the ADR uses the opposite AOA
input, as shown in table below. When this program pin
indicates Average, the ADR calculates angle of attack based
on the average of the angle of attack inputs 1 and 2.
-------------------------------------------------------
| SYSTEM | INITIAL NON-FAULT | INPUT TO ADR |
| NUMBER | INPUT TO ADR | AFTER FAULT |
-------------------------------------------------------
| 1 | input number 1 | input number 2 |
| 2 | input number 2 | input number 1 |
| 3 | input number 1 | input number 2 |
-------------------------------------------------------
AOA Resolver Input
6
_ VMO/MMO Program Discretes 1 through 4
These discretes are used to select alternate VMO/MMO levels.
There are four alternates and a basic VMO/MMO for each
aircraft type. Table below defines VMO/MMO versus state of the
VMO/MMO program discretes.
With no VMO/MMO discretes in the ground state (yes) the ADR
defaults to the BASIC LAW values for VMO/MMO.
Only one of the four VMO/MMO program discretes can be in the
ground state at any one time.
If more than one VMO/MMO program discrete is in the ground
state at any one time, the ADR defaults to the lowest
available alternate condition.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 10
Config-2 Nov 01/08
TAI
7
_ on the A/C only the VMO/MMO DISC 2 is available and is
provided by the L/G DOWN VMO/MMO SELECTION switch (22FP).
The normal position of this switch is open and it is grounded
after crew action for particular flights (ferry flight for
example).
Table below defines VMO/MMO state according to the switch
(22FP) position.
----------------------------------------------------------
| | VMO | MMO | SWITCH |
| LAW | (kts) | (Mach) | 22FP |
----------------------------------------------------------
| BASIC | 350 | 0.82 | OPEN |
| ALT 1 | | | |
| ALT 2 | 235 | 0.60 | GROUND |
| ALT 3 | | | |
| ALT 4 | | | |
----------------------------------------------------------
VMO/MMO Selection
8
_ SSEC Alternate discrete
The ADR is provided with two Static Source Error Correction
(SSEC) data sets stored in the computer for each SDI and for
each of sixteen aircraft types, one for use in normal
conditions and the other for use in alternate conditions.
With the two SSEC selection discretes open (no), the ADR
employs the normal SSEC curve for the aircraft type in which
it is installed. With the two SSEC selection discretes
grounded (yes), the ADR employs the alternate condition
curve.
9
_ AOA Alternate discrete
The ADR uses the alternate discrete inputs from the two
redundant SFCCs to select the angle of attack correction which
is appropriate for the current slat and flap settings.
Three laws are available for each aircraft type and SDI:
- the normal law is activated when all the discretes are open
- the alternate 1 law is activated when discretes 1A and 2A
are grounded
- the alternate 2 law is activated when discretes 1A, 2A, 1B
and 2B are grounded.
10
__ Baro Port A discrete
The ADR uses this discrete to select which ARINC 429 port is
used as a source for all baro-correction input data.
If this discrete is grounded, the baro port A is selected.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 11
Config-2 Nov 01/08
TAI
If this discrete is open, the baro port B is selected.
The A/C is wired with this discrete grounded (Ref. Dual Baro
discrete).
11
__ Dual Baro discrete
The ADR uses this discrete to select which ARINC 429 port is
used as a source for all baro-correction input data.
If this discrete is grounded, the baro port A and the baro
port B are selected and the baro port A discrete selection is
overriden. If this discrete is open, the baro port A or the
baro port B is selected depending on the baro port A discrete
selection. The A/C is wired with this discrete open.
12
__ Zero MACH SSEC discrete
The ADR uses this discrete to select the SSEC as a function of
Mach. When this program pin indicates Use SSEC (open), the
SSEC as a function of Mach is computed. When this program pin
indicates Ignore SSEC (ground), the ADR uses zero correction.
The A/C is wired with this discrete open.
13
__ Zero AOA SSEC discrete
The ADR uses this discrete to select the SSEC as a function of
angle of attack. When this program pin indicates Use SSEC
(open), the SSEC as a function of AOA is computed. When this
program pin indicates Ignore SSEC (ground), the ADR uses zero
correction.
The A/C is wired with this discrete open.
14
__ AIR FRM ID Code discrete
The ADR uses input discretes to identify the aircraft (type,
engine model) on which the ADIRU is fitted, and to select the
appropriate set of correction laws for Static Source Error
Correction (SSEC) and AOA corrections.
The ADIRU memory has the capacity to store 128 different sets
of laws.
To perform this coding, the ADR wires seven input discretes
and one discrete for parity to a common.
15
__ ADR Remote Test discrete
The ADR uses one discrete to select the remote test by
external control.
When this discrete is open, the test is not activated.
When this discrete is grounded, the test is activated.
The A/C is wired with this discrete open (unused).
The test is activated via the CFDS (Ref. 34-18-00).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 12
Config-2 Nov 01/08
TAI
16
__ ADR OFF DISCR input discrete
The ADR uses this discrete input to toggle its state between
ON and OFF. When the ADR is OFF, the output buses are disabled
and the ADR FAULT legend is inhibited whenever the momentary
action ADR pusbutton switch is pushed. When the ADR is ON, the
output buses output data and the ADR FAULT legend operates
normally. The ADR OFF DISCR input does not modify Air Data
computation.
17
__ Baro Analog/Digital Sel discrete
The ADR uses this discrete to select either the analog or
digital baro correction.
When this discrete is grounded, the analog baro correction is
selected.
When this discrete is open, the digital baro correction is
selected.
The A/C is wired with this discrete open.
18
__ Baro Corr 3 Active discrete
The ADR uses this discrete to determine for BITE purposes
whether the baro correction 3 is connected or not.
When the discrete is grounded, the baro correction 3 is
connected.
When the discrete is open, the baro correction 3 is not
connected.
The A/C is wired with this discrete open.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 13
Config-2 Nov 01/08
TAI
(3) Acquisition and processing of the sensor inputs
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 14
Config-2 Nov 01/08
TAI
Pressure Computation - Block Diagram
Figure 002
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 15
Config-2 Nov 01/08
TAI
(b) Temperature computation
(Ref. Fig. 003)
The resistance measured by the ADR and compensated for aircraft
wiring is then converted into a temperature value (TAT) according
to the Callender-Van Dusen equation given for a 500 ohm platinum
sensing element:
- -
| 3|
Rt | (TAT ) (TAT ) (TAT ) (TAT) |
-- = 1 + a | TAT - d (--- -1) (--- ) - b (--- -1) (---) |
Ro | (100 ) (100 ) (100 ) (100) |
- -
TAT = temperature in deg.C (TAT)
Rt = Resistance at temperature TAT
Ro = Resistance at 0 deg.C = 500 ohm
a = 0.003832
d = 1.81
b = 0.1 for temperature below 0 deg.C
b = 0 for temperature above 0 deg.C
The computation also compensates the TAT value for heating
effect. The ADR knows when the sensor is heated by the state of
the TAT Heat input discrete from the PHC. The heating
compensation law is provided by the TAT sensor supplier and is
function of Mach and air density.
The PHC 1 controls the heating of the TAT sensor 1 and the PHC 2
controls the heating of the TAT sensor 2. On the ground, the
sensors are not heated (Ref. 30-31-00 for more details).
The result of the above computation is available on the following
output labels:
- label 211 Total Air Temperature (BNR)
- label 231 Total Air Temperature (BCD).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 16
Config-2 Nov 01/08
TAI
Temperature (TAT) Computation - Block Diagram
Figure 003
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 17
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-230, 301-313, 401-404,
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-13-00
Page 18
Config-2 Nov 01/08
TAI
SFCC/AOA Alternate Discrete Signals
Figure 004
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 19
Config-2 Nov 01/08
TAI
R **ON A/C 231-299, 314-399, 405-499,
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 20
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
(a) General
The operational software of the ADR performs the following
computations:
- pressure altitude and pressure altitude rate function (ALT)
- Mach function (M)
- airspeed function (CAS/TAS)
- temperature function (SAT/TAT)
- maximum operating speed function (VMO/MMO).
1
_ Altitude pressure and altitude rate computation
(Ref. Fig. 005)
The altitude is derived from the corrected static pressure.
The conversion from pressure to altitude is based on the
geopotential altitude tables of the US Standard Atmosphere,
1962. The accepted range is (-2000 ft, +50,000 ft).
The altitude rate is calculated by multiplying the rate of
change of the corrected static pressure by the derivative of
altitude with respect to corrected static pressure:
dH d Ps dH
-- = ---- x ----
dt dt d Ps
2
_ Corrected altitude computation
(Ref. Fig. 006)
The ADR receives the baro correction introduced on the FCU by
each crew member. The ADR uses the values in hPa (labels 234
and 236 from the FCU).
The ADR also converts these values into inches of mercury (in.
Hg) and the result is sent on the output labels 235, 237.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 21
Config-2 Nov 01/08
TAI
Altitude and Altitude Rate Computation - Block Diagram
Figure 005
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 22
Config-2 Nov 01/08
TAI
Corrected Altitude Computation - Block Diagram
Figure 006
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 23
Config-2 Nov 01/08
TAI
The corrected altitude is calculated by a shift of the
pressure altitude to a value corresponding to the entered baro
correction. The result is sent on label 204 for CAPT baro
corrected altitude and label 220 for F/O baro corrected
altitude.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 24
Config-2 Nov 01/08
TAI
(c) CAS/Mach computation
(Ref. Fig. 007)
The ADR software computes these different parameters:
label 206 Computed Airspeed
label 205 Mach
label 207 Maximum Allowable Airspeed.
The CAS and Mach computation is based on the conversion of the
impact pressure:
impact pressure = Pt - Ps.
- the CAS computation converts input of impact pressure to output
corresponding to computed airspeed with:
______________________
/ Qc 2/7
CAS = Cso X V 5 X ((-- + 1) - 1)
Po
CAS = Computed Airspeed in knots
Cso = Speed of sound under standard day sea level
conditions = 661.4746 kts
Qc = Impact pressure in hPa
Po = Standard day sea level pressure = 1013.25 hPa
For accuracy reason, the CAS is output with a valid (NO) SSM
only after 30 kts. If the CAS is below 30 kts, the label 206
indicates 0 kt with SSM = NCD.
- the Mach computation converts Qc/Ps to Mach, with:
_______________________
/ Qc 2/7
MACH = V 5 ((-- + 1) - 1)
Ps
MACH = Mach number
Qc/Ps = Ratio of impact pressure to static pressure
If Mach is below 0.1, the label 205 indicates 0 with SSM = NCD.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 25
Config-2 Nov 01/08
TAI
CAS/Mach Computation - Block Diagram
Figure 007
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 26
Config-2 Nov 01/08
TAI
(d) SAT/TAS computation
(Ref. Fig. 008)
The ADR software calculates these different parameters:
label 213 BNR Static Air Temperature (SAT)
label 233 BCD Static Air Temperature (SAT)
label 210 BNR True Airspeed (TAS)
label 230 BCD True Airspeed (TAS).
- the calculation of the BNR SAT converts TAT to SAT with:
TAT
SAT = --------- - 273.15
2
1 + 0.2M
SAT = Static Air Temperature (in deg. C)
TAT = Total Air Temperature (in deg. Kelvin)
M = Mach number (corrected for static source error)
- the calculation converts Static Air Temperature from BNR to BCD
format.
- the calculation of the BNR TAS converts Mach and SAT to TAS
with:
___
/
TAS = 38.96695 x M x V SAT
TAS = True Airspeed (in knots)
M = Mach Number (corrected for Static Source Error)
SAT = Static Air Temperature (in deg. Kelvin)
- the calculation converts True Airspeed from BNR to BCD format.
For accuracy reason, the TAS is output with a valid (NO) SSM
only after 60 kts. If TAS is below 60 kts, the label 210
indicates 0 kt with SSM = NCD.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 27
Config-2 Nov 01/08
TAI
SAT/TAS Computation - Block Diagram
Figure 008
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 28
Config-2 Nov 01/08
TAI
VMO/MMO Computation - Block Diagram
Figure 009
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 29
Config-2 Nov 01/08
TAI
(5) ADR data outputs
The ADR data outputs are transmitted in two forms: digital and
discrete.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 30
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-230, 301-313, 401-404,
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 176 |L STATIC |W2048 |hPa | | 16 |125 |BNR | | |
| |PRESSURE |100 to 1100 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 177 |R STATIC |W2048 |hPa | | 16 |125 |BNR | | |
| |PRESSURE |100 to 1100 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 203 |ALTITUDE |W+/- 131072 | ft | 29 | 17 | 62 |BNR | ALT | |
| |1013.25mb |-2000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 +/-30 | | | | | | | |
| | |(30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 204 |BARO CORR |W+/- 131072 | ft | 29 | 17 | 62 |BNR | | |
| |ALT 1 |-1000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 +/-30 | | | | | | | |
| | |(30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 205 |MACH |W4096 |Mach| | 16 |125 |BNR | MN | |
| | |0.1 to 1.00 | | | | | | | |
| | |R 6.25 E-5 | | | | | | | |
| | |+/-0.010 | | | | | | | |
| | |(0.1) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 206 |COMPUTED |W1024 |Kts | | 14 |125 |BNR | CAS | |
| |AIRSPEED |30 to 450 | | | | | | | |
| | |R 0.0625 | | | | | | | |
| | |+1.5 (100) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 207 |MAXIMUM |W1024 |Kts | | 12 |125 |BNR | | |
| |ALLOWABLE |150 to 450 | | | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-13-00
Page 31
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |AIRSPEED |R 0.25 +/- 1| | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 210 |TRUE |W2048 |Kts | | 15 |125 |BNR | | |
| |AIRSPEED |60 to 599 | | | | | | | |
| | |R 0.0625 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 211 |TOTAL AIR |W +/- 512 |Deg.| 29 | 11 |500 |BNR | TAT | |
| |TEMP |-60 to 99 |C | | | | | | |
| | |R 0.25 | | | | | | | |
| | |+/- 0.5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 212 |ALTITUDE |W+/- 32768 |ft/ | 29 | 11 | 62 |BNR | | |
| |RATE |-20,000 to |mn | | | | | | |
| | | 20,000 | | | | | | | |
| | |R 16.0 | | | | | | | |
| | |+/-30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 213 |STATIC AIR|W+/- 512 |Deg.| 29 | 11 |500 |BNR | SAT | |
| |TEMP |-99 to +80 |C | | | | | | |
| | |R 0.25 | | | | | | | |
| | |+/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 215 |IMPACT |W512 |hPa | | 14 |125 |BNR | | |
| |PRESSURE |0 to 372.5 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 220 |BARO CORR |W +/- 131072| ft | 29 | 17 | 62 |BNR | | |
| |ALT 2 |-1000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 +/- 30 | | | | | | | |
| | | (30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 221 |IND ANGLE |W +/- 180 |Deg.| 29 | 12 | 62 |BNR | | |
| |OF ATTACK |-35 to +85 | | | | | | | |
| | |R 0.0439 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-13-00
Page 32
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 230 |TRUE |W +/- 799 |Kts | | 3 |500 |BCD | | |
| |AIRSPEED |60 to 599 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 231 |TOTAL AIR |W +/- 799 |Deg.| | 2 |500 |BCD | | |
| |TEMP |-60 to 99 |C | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 233 |STATIC AIR|W +/- 799 |Deg.| | 2 |500 |BCD | | |
| |TEMP |-99 to +80 |C | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 234 |BARO |W +/- 7999.9|hPa | | 5 |500 |BCD | | |
| |CORRECT 1 |745 to 1100 | | | | | | | |
| |mb |R 0.1 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 235 |BARO |W +/- 79.999|inHg| | 5 |500 |BCD | | |
| |CORRECT 1 |22.0 to 32.5| | | | | | | |
| |in.Hg |R 0.001 | | | | | | | |
| | |+/- 0.0074 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 236 |BARO |W +/- 7999.9|hPa | | 5 |500 |BCD | | |
| |CORRECT 2 |745 to 1100 | | | | | | | |
| |mb |R 0.1 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 237 |BARO |W +/- 79.999|inHg| | 5 |500 |BCD | | |
| |CORRECT 2 |22.0 to 32.5| | | | | | | |
| |in.Hg |R 0.001 | | | | | | | |
| | |+/- 0.0074 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 240 |VMO/MMO |W 399/0.99 |Kts/| |3/2 |1000|BCD | | |
| |STATUS |0 to 399 / |Mach| | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-13-00
Page 33
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |0 to 0.99 | | | | | | | |
| | |R 1 /0.01 | | | | | | | |
| | |1 / 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 241 |CORRECTED |W +/- 180 |Deg.| 29 | 12 | 62 |BNR | AOA | |
| |ANGLE OF |-35 to +85 | | | | | | | |
| |ATTACK |R 0.0439 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 242 |TOTAL |W2048 |hPa | | 16 |125 |BNR | | |
| |PRESSURE |100 to 1400 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 245 |UNCRCTD |W2048 |hPa | | 16 |125 |BNR | | |
| |AVG STAT |100 to 1100 | | | | | | | |
| |PRESSURE |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 246 |CORCTD |W2048 |hPa | | 16 |125 |BNR | | |
| |AVG STAT |100 to 1100 | | | | | | | |
| |PRESSURE |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 270 |DSCT WORD | | | | |500 |DIS | | |
| | 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 271 |DSCT WORD | | | | |500 |DIS | | |
| | 2 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 272 |DSCT WORD | | | | |500 |DIS | | |
| | 3 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 350 |MAINT WORD| | | | |500 |DIS | | |
| | 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 351 |MAINT WORD| | | | |500 |DIS | | |
| | 2 | | | | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-13-00
Page 34
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 352 |MAINT WORD| | | | |500 |DIS | | |
| | 3 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 155 |MAINT WORD| | | | |500 |DIS | | |
| | 4 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 354 |LRU ID | | | | | |ISO | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 356 |FAULT STAT| | | | | |ISO | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 377 |EQPT IDENT| | | | |500 |HEX | | |
-------------------------------------------------------------------------------
Output Label
--------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
--------------------------------------------------------------------------
| 11 | Icing Detector Heat | NO FAULT | FAULT |
| 12 | Pitot Probe Heat | NO FAULT | FAULT |
| 13 | ADR FAULT | FAULT | NO FAULT |
| 14 | Right Static Heat | NO FAULT | FAULT |
| 15 | Left Static Heat | NO FAULT | FAULT |
| 16 | TAT Heat | HEAT | NO HEAT |
| 17 | AOA 1 Heat | NO FAULT | FAULT |
| 18 | AOA 2 Heat | NO FAULT | FAULT |
| 19 | Overspeed Warning | WARN | NO WARN |
| 20 | Spare (Primary AOA Fault) | | |
| 21 | AOA Average/Unique | UNIQUE | AVERAGE |
| 22 | VMO/MMO 1 | YES | NO |
| 23 | VMO/MMO 2 | YES | NO |
| 24 | VMO/MMO 3 | YES | NO |
| 25 | VMO/MMO 4 | YES | NO |
| 26 | SSEC Alternate Select 1 | YES | NO |
| 27 | SSEC Alternate Select 2 | YES | NO |
| 28 | Baro Port A Select | Port A | Port B |
| 29 | Zero Mach SSEC Select | YES | NO |
--------------------------------------------------------------------------
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-13-00
Page 35
Config-2 Nov 01/08
TAI
--------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
--------------------------------------------------------------------------
Label 270 - Discrete Word 1
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-13-00
Page 36
Config-2 Nov 01/08
TAI
--------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
--------------------------------------------------------------------------
| 11 | Zero AOA SSEC Select | YES | NO |
| 12 | AOA Test Active | ACTIVE | NOT ACTIVE |
| 13 | Low Speed Warning 1 | FAST | SLOW |
| 14 | Low Speed Warning 2 | FAST | SLOW |
| 15 | Low Speed Warning 3 | FAST | SLOW |
| 16 | Low Speed Warning 4 | SLOW | FAST |
| 17 | Spare | | |
| 18 | Spare | | |
| 19 | Spare | | |
| 20 | AOA Correction 1A | YES | NO |
| 21 | AOA Correction 1B | YES | NO |
| 22 | AOA Correction 2A | YES | NO |
| 23 | AOA Correction 2B | YES | NO |
|24 to 29| Spare | | |
--------------------------------------------------------------------------
Label 271 - Discrete Word 2
--------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
--------------------------------------------------------------------------
| 11 | SDI 2 | GROUND | OPEN |
| 12 | SDI 1 | GROUND | OPEN |
| 13 | Dual Baro Select | DUAL PORT | SINGLE PORT|
| 14 | Analog Baro Select | ANALOG | DIGITAL |
| 15 | Spare IDSC 1 | GROUND | OPEN |
| 16 | Spare IDSC 2 | GROUND | OPEN |
| 17 | Spare IDSC 3 | GROUND | OPEN |
| 18 | Baro 3 Present | PRESENT | ABSENT |
| 19 | Spare IDSC 4 | GROUND | OPEN |
| 20 | CFDS Select | NOT ACTIVE| ACTIVE |
| 21 | Spare | | |
| 22 | BITE Memory Clear Enable | ENABLE | DISABLE |
| 23 | BITE Write Inhibit | INHIBIT | ENABLE |
| 24 | ADR Interface Test | TEST | NORMAL |
| 25 | ADR Off Command | GROUND | OPEN |
| 26 | Reserved | | |
| 27 | ADR On/Off Status | OFF | ON |
| 28 | Spare | | |
| 29 | Spare | | |
--------------------------------------------------------------------------
Label 272 - Discrete Word 3
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-13-00
Page 37
Config-2 Nov 01/08
TAI
R **ON A/C 231-299, 314-399, 405-499,
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 176 |L STATIC |W2048 |hPa | | 16 |125 |BNR | | |
| |PRESSURE |100 to 1100 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 177 |R STATIC |W2048 |hPa | | 16 |125 |BNR | | |
| |PRESSURE |100 to 1100 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 203 |ALTITUDE |W+/- 131072 | ft | 29 | 17 | 62 |BNR | ALT | |
| |1013.25mb |-2000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 +/-30 | | | | | | | |
| | |(30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 204 |BARO CORR |W+/- 131072 | ft | 29 | 17 | 62 |BNR | | |
| |ALT 1 |-1000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 +/-30 | | | | | | | |
| | |(30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 205 |MACH |W4096 |Mach| | 16 |125 |BNR | MN | |
| | |0.1 to 1.00 | | | | | | | |
| | |R 6.25 E-5 | | | | | | | |
| | |+/-0.010 | | | | | | | |
| | |(0.1) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 206 |COMPUTED |W1024 |Kts | | 14 |125 |BNR | CAS | |
| |AIRSPEED |30 to 450 | | | | | | | |
| | |R 0.0625 | | | | | | | |
| | |+1.5 (100) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 207 |MAXIMUM |W1024 |Kts | | 12 |125 |BNR | | |
| |ALLOWABLE |150 to 450 | | | | | | | |
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 38
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |AIRSPEED |R 0.25 +/- 1| | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 210 |TRUE |W2048 |Kts | | 15 |125 |BNR | | |
| |AIRSPEED |60 to 599 | | | | | | | |
| | |R 0.0625 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 211 |TOTAL AIR |W +/- 512 |Deg.| 29 | 11 |500 |BNR | TAT | |
| |TEMP |-60 to 99 |C | | | | | | |
| | |R 0.25 | | | | | | | |
| | |+/- 0.5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 212 |ALTITUDE |W+/- 32768 |ft/ | 29 | 11 | 62 |BNR | | |
| |RATE |-20,000 to |mn | | | | | | |
| | | 20,000 | | | | | | | |
| | |R 16.0 | | | | | | | |
| | |+/-30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 213 |STATIC AIR|W+/- 512 |Deg.| 29 | 11 |500 |BNR | SAT | |
| |TEMP |-99 to +80 |C | | | | | | |
| | |R 0.25 | | | | | | | |
| | |+/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 215 |IMPACT |W512 |hPa | | 14 |125 |BNR | | |
| |PRESSURE |0 to 372.5 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 220 |BARO CORR |W +/- 131072| ft | 29 | 17 | 62 |BNR | | |
| |ALT 2 |-1000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 +/- 30 | | | | | | | |
| | | (30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 221 |IND ANGLE |W +/- 180 |Deg.| 29 | 12 | 62 |BNR | | |
| |OF ATTACK |-35 to +85 | | | | | | | |
| | |R 0.0439 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 39
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 230 |TRUE |W +/- 799 |Kts | | 3 |500 |BCD | | |
| |AIRSPEED |60 to 599 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 231 |TOTAL AIR |W +/- 799 |Deg.| | 3 |500 |BCD | | |
| |TEMP |-60 to 99 |C | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 233 |STATIC AIR|W +/- 799 |Deg.| | 3 |500 |BCD | | |
| |TEMP |-99 to +80 |C | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 234 |BARO |W +/- 7999.9|hPa | | 5 |500 |BCD | | |
| |CORRECT 1 |745 to 1100 | | | | | | | |
| |mb |R 0.1 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 235 |BARO |W +/- 79.999|inHg| | 5 |500 |BCD | | |
| |CORRECT 1 |22.0 to 32.5| | | | | | | |
| |in.Hg |R 0.001 | | | | | | | |
| | |+/- 0.0074 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 236 |BARO |W +/- 7999.9|hPa | | 5 |500 |BCD | | |
| |CORRECT 2 |745 to 1100 | | | | | | | |
| |mb |R 0.1 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 237 |BARO |W +/- 79.999|inHg| | 5 |500 |BCD | | |
| |CORRECT 2 |22.0 to 32.5| | | | | | | |
| |in.Hg |R 0.001 | | | | | | | |
| | |+/- 0.0074 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 240 |VMO/MMO |W 399/0.99 |Kts/| |3/2 |1000|BCD | | |
| |STATUS |0 to 399 / |Mach| | | | | | |
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 40
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |0 to 0.99 | | | | | | | |
| | |R 1 /0.01 | | | | | | | |
| | |1 / 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 241 |CORRECTED |W +/- 180 |Deg.| 29 | 12 | 62 |BNR | AOA | |
| |ANGLE OF |-35 to +85 | | | | | | | |
| |ATTACK |R 0.0439 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 242 |TOTAL |W2048 |hPa | | 16 |125 |BNR | | |
| |PRESSURE |100 to 1400 | | | | | | | |
| | |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 245 |UNCRCTD |W2048 |hPa | | 16 |125 |BNR | | |
| |AVG STAT |100 to 1100 | | | | | | | |
| |PRESSURE |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 246 |CORCTD |W2048 |hPa | | 16 |125 |BNR | | |
| |AVG STAT |100 to 1100 | | | | | | | |
| |PRESSURE |R 0.03125 | | | | | | | |
| | |+/- 0.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 270 |DSCT WORD | | | | |500 |DIS | | |
| | 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 271 |DSCT WORD | | | | |500 |DIS | | |
| | 2 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 272 |DSCT WORD | | | | |500 |DIS | | |
| | 3 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 350 |MAINT WORD| | | | |500 |DIS | | |
| | 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 351 |MAINT WORD| | | | |500 |DIS | | |
| | 2 | | | | | | | | |
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 41
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 352 |MAINT WORD| | | | |500 |DIS | | |
| | 3 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 155 |MAINT WORD| | | | |500 |DIS | | |
| | 4 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 354 |LRU ID | | | | | |ISO | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 356 |FAULT STAT| | | | | |ISO | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 377 |EQPT IDENT| | | | |500 |HEX | | |
-------------------------------------------------------------------------------
Output Label
--------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
--------------------------------------------------------------------------
| 11 | Icing Detector Heat | NO FAULT | FAULT |
| 12 | Pitot Probe Heat | NO FAULT | FAULT |
| 13 | ADR FAULT | FAULT | NO FAULT |
| 14 | Right Static Heat | NO FAULT | FAULT |
| 15 | Left Static Heat | NO FAULT | FAULT |
| 16 | TAT Heat | HEAT | NO HEAT |
| 17 | AOA 1 Heat | NO FAULT | FAULT |
| 18 | AOA 2 Heat | NO FAULT | FAULT |
| 19 | Overspeed Warning | WARN | NO WARN |
| 20 | Spare (Primary AOA Fault) | | |
| 21 | AOA Average/Unique | UNIQUE | AVERAGE |
| 22 | VMO/MMO 1 | YES | NO |
| 23 | VMO/MMO 2 | YES | NO |
| 24 | VMO/MMO 3 | YES | NO |
| 25 | VMO/MMO 4 | YES | NO |
| 26 | SSEC Alternate Select 1 | YES | NO |
| 27 | SSEC Alternate Select 2 | YES | NO |
| 28 | Baro Port A Select | Port A | Port B |
| 29 | Zero Mach SSEC Select | YES | NO |
--------------------------------------------------------------------------
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 42
Config-2 Nov 01/08
TAI
--------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
--------------------------------------------------------------------------
Label 270 - Discrete Word 1
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 43
Config-2 Nov 01/08
TAI
--------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
--------------------------------------------------------------------------
| 11 | Zero AOA SSEC Select | YES | NO |
| 12 | AOA Test Active | ACTIVE | NOT ACTIVE |
| 13 | Low Speed Warning 1 | FAST | SLOW |
| 14 | Low Speed Warning 2 | FAST | SLOW |
| 15 | Low Speed Warning 3 | FAST | SLOW |
| 16 | Low Speed Warning 4 | SLOW | FAST |
| 17 | Spare | | |
| 18 | Spare | | |
| 19 | Spare | | |
| 20 | AOA Correction 1A | YES | NO |
| 21 | AOA Correction 1B | YES | NO |
| 22 | AOA Correction 2A | YES | NO |
| 23 | AOA Correction 2B | YES | NO |
| 24-25 | Bus A Altimeter Mode | refer to Table 11A |
| 26-27 | Bus B Altimeter Mode | refer to Table 11A |
| 28 | Spare | | |
| 29 | Spare | | |
--------------------------------------------------------------------------
Label 271 - Discrete Word 2
------------------------------------------------------------------------------
| Altimeter Mode | FCU Input | Label 271 Bus A - Bits 25 & 24 |
| | Label 272 - Bits 15 & 13 | Bus B - Bits 27 & 26 |
|----------------------------------------------------------------------------|
| STD | 01 | 01 |
|----------------|--------------------------|--------------------------------|
| QNH | 10 | 10 |
|----------------|--------------------------|--------------------------------|
| QFE | 00 | 00 |
|----------------|--------------------------|--------------------------------|
| INVALID | 11 | 11 |
------------------------------------------------------------------------------
Altimeter Mode Conversion
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 44
Config-2 Nov 01/08
TAI
--------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
--------------------------------------------------------------------------
| 11 | SDI 2 | GROUND | OPEN |
| 12 | SDI 1 | GROUND | OPEN |
| 13 | Dual Baro Select | DUAL PORT | SINGLE PORT|
| 14 | Analog Baro Select | ANALOG | DIGITAL |
| 15 | Spare IDSC 1 | GROUND | OPEN |
| 16 | Spare IDSC 2 | GROUND | OPEN |
| 17 | Spare IDSC 3 | GROUND | OPEN |
| 18 | Baro 3 Present | PRESENT | ABSENT |
| 19 | Spare IDSC 4 | GROUND | OPEN |
| 20 | CFDS Select | NOT ACTIVE| ACTIVE |
| 21 | Spare | | |
| 22 | BITE Memory Clear Enable | ENABLE | DISABLE |
| 23 | BITE Write Inhibit | INHIBIT | ENABLE |
| 24 | ADR Interface Test | TEST | NORMAL |
| 25 | ADR Off Command | GROUND | OPEN |
| 26 | Reserved | | |
| 27 | ADR On/Off Status | OFF | ON |
| 28 | Spare | | |
| 29 | Spare | | |
--------------------------------------------------------------------------
Label 272 - Discrete Word 3
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 45
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
-------------------------------------------------------------------------
| BIT N⁰ | FUNCTION | 1 = GND | 0 = OPEN |
-------------------------------------------------------------------------
| 11 | A/C ID Code 32/0 | GROUND | OPEN |
| 12 | A/C ID Code 64/0 | GROUND | OPEN |
|13 to 23| Spare | | |
| 24 | A/C ID Code 1/0 | GROUND | OPEN |
| 25 | A/C ID Code 2/0 | GROUND | OPEN |
| 26 | A/C ID Code 4/0 | GROUND | OPEN |
| 27 | A/C ID Code 8/0 | GROUND | OPEN |
| 28 | A/C ID Code 16/0 | GROUND | OPEN |
| 29 | A/C ID Parity | GROUND | OPEN |
-------------------------------------------------------------------------
Label 352 - Discrete Word 4
-------------------------------------------------------------------------
| BIT N⁰ | FUNCTION |
-------------------------------------------------------------------------
| 11 | = 0 -- |
| 12 | = 1 | LSD = 6 |
| 13 | = 1 | |
| 14 | = 0 -- |
| 15 | = 0 -- |
| 16 | = 0 | MSD = 0 |
| 17 | = 0 | |
| 18 | = 0 -- |
|19 to 29| Spare |
-------------------------------------------------------------------------
Label 377 - Equipment Ident
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 46
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-230, 301-313, 401-404,
--------------------------------------------------------------------------
| LABEL | PARAMETER DEFINITION | SSM | ON GND CRITERION |
|-------------------------------------------------------------------------
| 203 | Altitude | NO | |
| 204 | Baro Corr Alt 1 | NO | |
| 220 | Baro Corr Alt 2 | NO | |
| 251 | Baro Corr Alt 3 | NO | |
| 205 | Mach | NCD | 0 Mach less than 0.1 |
| 206 | Computed Airspeed | NCD | 0 kt CAS less than 30 kts |
| 207 | Max Allowable Airspeed | NO | |
| 210 | True Airspeed | NCD | 0 kt CAS less than 60 kts |
| 211 | Total Air Temp | NO | |
| 212 | Altitude Rate | NO | |
| 213 | Static Air Temp | NO | |
| 215 | Impact Pressure | NO | |
| 221 | Indicated AOA | NCD | NOTE CAS less than 60 kts |
| 230 | True Airspeed | NCD | 0 kt CAS less than 60 kts |
| 231 | Total Air Temp | NO | |
| 233 | Static Air Temp | NO | |
| 234 | Baro Corr (hPa) 1 & 2 & 3| NO | |
| 236 | Baro Corr (hPa) 2 | NO | |
| 034 | Baro Corr (hPa) 3 | NO | |
| 235 | Baro Corr (in.Hg) 1 | NO | |
| 237 | Baro Corr (in.Hg) 2 | NO | |
| 035 | Baro corr (in.Hg) 3 | NO | |
| 240 | VMO/MMO status | NO | |
| 241 | Corrected AOA | NCD | 0⁰ CAS less than 60 kts |
| 242 | Total Pressure | NO | |
| 176 | L. Static Pressure | NO | |
| 177 | R. Static Pressure | NO | |
| 245 | Uncrctd Avg Stat Pressure| NO | |
| 246 | Corctd Avg Stat Pressure | NO | |
| 270 | Discrete words | NO | |
| 271 | Discrete words | NO | |
| 272 | Discrete words | NO | |
| 350 | Discrete words | NO | |
| 351 | Discrete words | NO | |
| 352 | Discrete words | NO | |
| 377 | Discrete words | NO | |
| 354 | LRU ID | N/A | N/A |
| 356 | Fault Status | N/A | N/A |
--------------------------------------------------------------------------
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-13-00
Page 47
Config-2 Nov 01/08
TAI
--------------------------------------------------------------------------
| LABEL | PARAMETER DEFINITION | SSM | ON GND CRITERION |
|-------------------------------------------------------------------------
Output Label Value on Ground
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-13-00
Page 48
Config-2 Nov 01/08
TAI
R **ON A/C 231-299, 314-399, 405-499,
--------------------------------------------------------------------------
| LABEL | PARAMETER DEFINITION | SSM | ON GND CRITERION |
|------------------------------------------------------------------------------
| 203 | Altitude | NO | |
| 204 | Baro Corr Alt 1 | NO | |
| 220 | Baro Corr Alt 2 | NO | |
| 251 | Baro Corr Alt 3 | NO | |
| 205 | Mach | NCD | 0 Mach less than 0.1 |
| 206 | Computed Airspeed | NCD | 0 kt CAS less than 30 kts |
| 207 | Max Allowable Airspeed | NO | |
| 210 | True Airspeed | NCD | 0 kt CAS less than 60 kts |
| 211 | Total Air Temp | NO | |
| 212 | Altitude Rate | NO | |
| 213 | Static Air Temp | NO | |
| 215 | Impact Pressure | NO | |
| 221 | Indicated AOA | NCD | NOTE CAS less than 60 kts |
| 230 | True Airspeed | NCD | 0 kt CAS less than 60 kts |
| 231 | Total Air Temp | NO | |
| 233 | Static Air Temp | NO | |
| 234 | Baro Corr (hPa) 1 & 2 & 3| NO | |
| 236 | Baro Corr (hPa) 2 | NO | |
| 034 | Baro Corr (hPa) 3 | NO | |
| 235 | Baro Corr (in.Hg) 1 | NO | |
| 237 | Baro Corr (in.Hg) 2 | NO | |
| 035 | Baro corr (in.Hg) 3 | NO | |
| 240 | VMO/MMO status | NO | |
| 241 | Corrected AOA | NCD | Cmptd value CAS less than 60 kts |
| 242 | Total Pressure | NO | |
| 176 | L. Static Pressure | NO | |
| 177 | R. Static Pressure | NO | |
| 245 | Uncrctd Avg Stat Pressure| NO | |
| 246 | Corctd Avg Stat Pressure | NO | |
| 270 | Discrete words | NO | |
| 271 | Discrete words | NO | |
| 272 | Discrete words | NO | |
| 350 | Discrete words | NO | |
| 351 | Discrete words | NO | |
| 352 | Discrete words | NO | |
| 377 | Discrete words | NO | |
| 354 | LRU ID | N/A | N/A |
| 356 | Fault Status | N/A | N/A |
-------------------------------------------------------------------------------
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 49
Config-2 Nov 01/08
TAI
--------------------------------------------------------------------------
| LABEL | PARAMETER DEFINITION | SSM | ON GND CRITERION |
|------------------------------------------------------------------------------
Output Label Value on Ground
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 50
Config-2 Nov 01/08
TAI
--------------------------------------------------------------------------
| | | TYPE A | TYPE B |
| | |-------------------|-------------------|
|OCTAL| | MAXIMUM | MAXIMUM | MAXIMUM | MAXIMUM |
|LABEL| SIGNAL | FILTER |TRANSPORT| FILTER |TRANSPORT|
| | |BANDWIDTH|DELAY****|BANDWIDTH|DELAY****|
| | | (HZ) | (MSEC) | (HZ) | (MSEC) |
--------------------------------------------------------------------------
| 034 |Baro Corr mb 3 | N/A | 220 | N/A | 220 |
| 035 |Baro Corr ins hg 3 | N/A | 220 | N/A | 220 |
| 176 |Left Static Pressure | N/A *** | 119 | N/A *** | 119 |
| 177 |Right Static Pressure | N/A *** | 119 | N/A *** | 119 |
| 203 |Altitude | 8 | 86 | 3 | 120 |
| 204 |Baro Corr Alt 1 | 8 | 94 | 3 | 128 |
| 205 |Mach | 8 | 86 | 3 | 120 |
| 206 |Computed Airspeed | 8 | 86 | 3 | 120 |
| 207 |Max Allow. Aispeed | 8 | 219 | 8 | 219 |
| 210 |True Airspeed | 8 | 219 | 3 | 253 |
| 211 |Total Air Temp. | 4 | 1019 | 3 | 1049 |
| 212 |Altitude Rate | 1.8 | 415 | 1,8 | 415 |
| 213 |Static Air Temp. | 4 | 1019 | 3 | 1049 |
| 215 |Impact Pressure | 8 | 219 | 3 | 253 |
| 220 |Baro Corr Alt 2 | 8 | 94 | 3 | 128 |
| 221 |Ind. Angle of Attack | 8 | 167 | 3 | 220 |
| 230 |True Airspeed | 8 | 370 | 3 | 404 |
| 231 |Total Air Temp | 4 | 1019 | 3 | 1049 |
| 233 |Static Air Temp | 4 | 1019 | 3 | 1049 |
| 234 |Baro Corr mb 1 | N/A | 169 | N/A | 169 |
| 235 |Baro Corr ins hg 1 | N/A | 169 | N/A | 169 |
| 236 |Baro Corr mb 2 | N/A | 169 | N/A | 169 |
| 237 |Baro Corr ins hg 2 | N/A | 169 | N/A | 169 |
| 241 |Corr Angle of Attack | 8 | 167 | 3 | 220 |
| 242 |Total Pressure | N/A *** | 219 | N/A *** | 219 |
| 245 |Uncorr Avg Static Pressure| N/A *** | 119 | N/A *** | 119 |
| 246 |Corr Avg Static Pressure | N/A *** | 119 | N/A *** | 119 |
| 251 |Baro Corr Alt 3 | 8 | 94 | 3 | 128 |
--------------------------------------------------------------------------
Table 15 A - ADR output filter data characteristics.
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 51
Config-2 Nov 01/08
TAI
- 350 Maintenance Word 1,
- 351 Maintenance Word 2,
- 356 Fault Status,
- 377 Equipment ID.
R
EFF :
231-299, 314-399, 405-499, 34-13-00
Page 52
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
--------------------------------------------------------------------------
| SIGNAL | PIN | OUTPUT | DEFINITION |
|------------------------------|------------|-------------|--------------|
| ADR OFF Light | TP- 4E | OPEN/GROUND | ON/OFF |
| ADR FAULT | TP- 4D | OPEN/GROUND | NO/FAULT |
| Low Speed Warning Discrete 1 | TP- 2F | OPEN/GROUND | SLOW/FAST |
| Low Speed Warning Discrete 2 | TP- 2G | OPEN/GROUND | SLOW/FAST |
| Low Speed Warning Discrete 3 | TP- 6F | OPEN/GROUND | SLOW/FAST |
| Low Speed Warning Discrete 4 | TP-13H | OPEN/GROUND | FAST/SLOW |
| AOA Special Test | TP-12G | OPEN/28VDC | NO/TEST |
--------------------------------------------------------------------------
ADR - Discrete Output Signals
NOTE : The ADR OFF light, the low speed warning 4 and ADR FAULT
____
discretes are forced to the ground state when the watchdog
timer (WDT) has timed out.
1
_ ADR OFF Light
When the ADR is commanded OFF, it issues a ground state to the
ADR OFF light discrete to enable the legend to come on.
2
_ ADR FAULT
When an ADR FAULT is detected, the ADR issues a ground state
to the ADR FAULT discrete to enable the legend to come on.
3
_ Low speed warning discretes 1, 2, 3, 4
The ADR provides four standard Open/Ground low speed warning
output discretes.
- Airspeed conditions
Airspeed decreasing
Discrete 1 = OPEN for Airspeed less than or equal to 100
knots
Discrete 2 = OPEN for Airspeed less than or equal to 50
knots
Discrete 3 = OPEN for Airspeed less than or equal to 155
knots
Discrete 4 = GROUND for Airspeed less than or equal to 260
knots
Airspeed increasing
Discrete 1 = GROUND for Airspeed greater than 104 knots
Discrete 2 = GROUND for Airspeed greater than 54 knots
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 53
Config-2 Nov 01/08
TAI
Discrete 3 = GROUND for Airspeed greater than 159 knots
Discrete 4 = OPEN for Airspeed greater than 264 knots
- Power off conditions
Discrete 1 = OPEN
Discrete 2 = OPEN
Discrete 3 = OPEN
Discrete 4 = OPEN
- CAS detected failure condition
Discrete 1 = previous state
Discrete 2 = previous state
Discrete 3 = previous state
Discrete 4 = OPEN
4
_ AOA special test
The ADR provides an OPEN/GROUND output discrete to drive the
AOA self-test.
The AOA self-test is commanded via the CFDIU interface bus.
When the AOA test is active, the AOA sensor is offset to +15
deg. (plus or minus 1 deg.). All AOA dependent parameters
reflect this offset and their SSMs indicate Functional Test
(FT).
The RETURN command from the MCDU results in the discrete
output set to OPEN.
Ref. 34-18-00 for more details.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 54
Config-2 Nov 01/08
TAI
3. ________________________________
Operation/Control and Indicating
A. Control
R A. Control
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 55
Config-2 Nov 01/08
TAI
ADR Control on CDU
Figure 010
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-13-00
Page 56
Config-2 Nov 01/08
TAI
R ADR Control on MSU
R Figure 010A
R
EFF :
405-499, 34-13-00
Page 57
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
B. Indicating
Altitude (ALT), Computed Airspeed (CAS), Mach number (M) and Vertical
Speed (V/S) are computed by the ADIRU (ADR portion), processed by the
associated DMC and displayed on the PFDs.
True Airspeed (TAS) is supplied in the same way but is displayed on the
NDs.
In normal configuration, with the AIR DATA selector switch in NORM
position, the ADR 1 displays information on CAPT PFD and ND. The ADR 2
displays information on F/O PFD and ND.
Static Air Temperature (SAT) and Total Air Temperature (TAT) are also
supplied in the same way but are permanently displayed on the lower part
of the lower ECAM DU.
These items of information are displayed by the ADR 2 when EIS1 is
installed, by ADR1 when EIS2 is installed.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 58
Config-2 Nov 01/08
TAI
Computed Airspeed and Mach Indication Display
Figure 011
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 59
Config-2 Nov 01/08
TAI
Altitude Indication Display
Figure 012
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 60
Config-2 Nov 01/08
TAI
The A/C actual altitude is provided by a counter located at the
middle of the scale in which the actual value is displayed in
green digits.
The hundreds of feet are written in a large size whereas the tens
and units are displayed by a drum operating as a classical
mechanical altimeter.
Small white marks are positioned in front of each number on the
tape (item A).
If the altitude is negative, a NEG white indication is added at
the left of the digital value. The digital value is limited to
minus 1500 ft (item B).
Different displays are presented depending on the baro setting
reference (standard or baro corrected), Ref. 31-64-00.
In case of baro altitude failure, the scale goes out of view and
a red ALT flag flashes for a few seconds in the altitude window,
then remains steady (item C).
In case of discrepancy between the altitude given by the CAPT air
data source and the altitude given by the F/O air data source, a
CHECK ALT amber flag is presented on the right side of the
altitude scale (item D).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 61
Config-2 Nov 01/08
TAI
Vertical Speed Indication Display
Figure 013
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 62
Config-2 Nov 01/08
TAI
In case of a failure warning, the vertical speed scale is removed
and replaced by a red V/S flag which flashes for a few seconds,
then remains steady (item B).
(2) ND display
(Ref. Fig. 014)
The true airspeed (TAS) is displayed on the ND in ROSE, ARC and PLAN
mode (item A).
The TAS information is displayed by a numerical indication of three
digits preceded by TAS indication. This information is displayed in
the left upper corner of the ND for speed higher than 100 kts. Below
this value TAS indication remains visible but is followed by three
dashes (item B).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 63
Config-2 Nov 01/08
TAI
True Airspeed Indication Display
Figure 014
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 64
Config-2 Nov 01/08
TAI
TAT/SAT Indication Display
Figure 015
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 65
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
C. Warnings
In addition to the AIR DATA flags displayed on the PFDs and NDs and on
the CDU, warning messages are displayed on the lower part of the upper
ECAM DU.
Two kinds of warning messages can be displayed:
- failure warning messages in case of loss of AIR DATA parameters
- configuration warning messages in case of dangerous configuration of
the aircraft.
When the CLR key is pushed on the ECAM control panel, a STATUS page is
displayed on the lower ECAM DU and indicates the STATUS and INOP SYS
(systems).
R C. Warnings
R In addition to the AIR DATA flags displayed on the PFDs and NDs, warning
R messages are displayed on the lower part of the upper ECAM DU.
R Two kinds of warning messages can be displayed:
R - failure warning messages in case of loss of AIR DATA parameters
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 66
Config-2 Nov 01/08
TAI
NAV ADR 1(2)(3) FAULT Message
Figure 016
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 67
Config-2 Nov 01/08
TAI
NAV ADR 1+3 (2+3) FAULT Message
Figure 017
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 68
Config-2 Nov 01/08
TAI
NAV ADR 1 + 2 FAULT Message
Figure 018
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 69
Config-2 Nov 01/08
TAI
R - configuration warning messages in case of dangerous configuration of
R the aircraft.
R When the CLR key is pushed on the ECAM control panel, a STATUS page is
R displayed on the lower ECAM DU and indicates the STATUS and INOP SYS
R (systems).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 70
Config-2 Nov 01/08
TAI
NAV ALTI DISCREPANCY Message
Figure 019
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 71
Config-2 Nov 01/08
TAI
OVERSPEED VMO/MMO Message
Figure 020
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 72
Config-2 Nov 01/08
TAI
OVERSPEED VFE/VLE Message
Figure 021
R
EFF :
301-399,
201-203, 211-212, 215-215, 218-299, 34-13-00
Page 73
Config-2 Nov 01/08
TAI
OVERSPEED VFE/VLE Message
Figure 021A
R
EFF :
401-499, 34-13-00
Page 74
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 75
Config-2 Nov 01/08
TAI
Stall Warning Message
Figure 022
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 76
Config-2 Nov 01/08
TAI
**ON A/C 001-050, 053-099,
EFF :
001-050, 053-099, 34-13-00
Page 1
Config-3 Feb 01/08
TAI
R Pressure Computation - Block Diagram
R Figure 001
EFF :
001-050, 053-099, 34-13-00
Page 2
Config-3 Nov 01/06
TAI
R CAS/Mach Computation - Block Diagram
R Figure 002
EFF :
001-050, 053-099, 34-13-00
Page 3
Config-3 Nov 01/06
TAI
R . label 176 Left Static Pressure
R . label 177 Right Static Pressure
R . label 242 Total Pressure
R . label 245 Averaged Static Pressure
R . label 246 Corrected Static Pressure
EFF :
001-050, 053-099, 34-13-00
Page 4
Config-3 Nov 01/06
TAI
(b) AOA computation
The A/C is wired in the AOA unique selection, so the ADR computes
the AOA with the reading of one resolver. The second resolver is
R used as a back-up. The monitoring function is described in 34-18.
The ADR determines the corrected angle of attack value which
depends on the system number and the slat/flap position.
For a CAS less than 60 kts: AOAc is still computed but coded NCD.
The corrected angle of attack is calculated as follows:
AOA ind
AOAc = ------- + I
K
where:
AOA ind = Indicated Angle of Attack (Ref. 34-11-00 for the
relation between resolver and AOA indication)
K, I = Correction coefficients which depend on system
number, slat and flap configuration and magnitude
AOA indication.
The configuration is defined by the status of four input
discretes (Ref. 2.A.(2)(c)).
The results of the above computation is available on the labels:
- label 221 = Indicated Angle of Attack
- label 241 = Corrected Angle of Attack
EFF :
001-050, 053-099, 34-13-00
Page 5
Config-3 Feb 01/08
TAI
R **ON A/C 001-050,
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 047 |S/W IDENT | | | | |1000|BCD | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 176 |L STATIC |W2048 |hPa | | 18 |125 |BNR | | |
| |PRESSURE |100 to 1100 | | | | | | | |
| | |R 0.0078 | | | | | | | |
| | |+/- 0.30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 177 |R STATIC |W2048 |hPa | | 18 |125 |BNR | | |
| |PRESSURE |100 to 1100 | | | | | | | |
| | |R 0.0078 | | | | | | | |
| | |+/- 0.30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 203 |STANDARD |W+/- 131072 | ft | 29 | 17 | 62 |BNR | ALT | |
| |ALTITUDE |-2000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/-40 | | | | | | | |
| | |(30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 204 |BARO CORR |W+/- 131072 | ft | 29 | 17 | 62 |BNR | | |
| |ALT 1 |-2000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/-47 | | | | | | | |
| | |(30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 205 |MACH |W4096 |Mach| | 16 |125 |BNR | MN | |
| | |0.1 to 1.00 | | | | | | | |
| | |R 6.25 E-5 | | | | | | | |
| | |+/-0.015 | | | | | | | |
| | |(0.1) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 206 |COMPUTED |W1024 |Kts | | 14 |125 |BNR | CAS | |
| |AIRSPEED |30 to 450 | | | | | | | |
| | |R 0.0625 | | | | | | | |
R
EFF :
001-050, 34-13-00
Page 6
Config-3 Feb 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |2 (100) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 207 |MAXIMUM |W1024 |Kts | | 12 |125 |BNR | | |
| |ALLOWABLE |150 to 450 | | | | | | | |
| |AIRSPEED |R 0.25 | | | | | | | |
| | |+/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 210 |TRUE |W2048 |Kts | | 15 |125 |BNR | | |
| |AIRSPEED |60 to 599 | | | | | | | |
| | |R 0.0625 | | | | | | | |
| | |+/- 4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 211 |TOTAL AIR |W +/- 512 |Deg.| 29 | 11 |500 |BNR | TAT | |
| |TEMP |-60 to +100 |C | | | | | | |
| | |R 0.25 | | | | | | | |
| | |+/- 0.5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 212 |ALTITUDE |W+/- 32768 |ft/ | 29 | 11 | 62 |BNR | | |
| |RATE |+/- 20000 |mn | | | | | | |
| | |R 2 | | | | | | | |
| | |+/- 30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 213 |STATIC AIR|W+/- 512 |Deg.| 29 | 11 |500 |BNR | SAT | |
| |TEMP |-99 to +80 |C | | | | | | |
| | |R 0.25 | | | | | | | |
| | |+/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 215 |IMPACT |W512 |hPa | | 16 |125 |BNR | | |
| |PRESSURE |0 to 372.5 | | | | | | | |
| | |R 0.0078 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 220 |BARO CORR |W +/- 131072| ft | 29 | 17 | 62 |BNR | | |
| |ALT 2 |-2000 to | | | | | | | |
| | | 50000 | | | | | | | |
| | |R 1 | | | | | | | |
| | |47 (30,000) | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
001-050, 34-13-00
Page 7
Config-3 Feb 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 221 |IND ANGLE |W +/- 180 |Deg.| 29 | 12 | 62 |BNR | | |
| |OF ATTACK |-40 to +90 | | | | | | | |
| | |R 0.0439 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 230 |TRUE |W +/- 799 |Kts | | 3 |500 |BCD | | |
| |AIRSPEED |60 to 599 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 231 |TOTAL AIR |W +/- 799 |Deg.| | 2 |500 |BCD | | |
| |TEMP |-60 to +100 |C | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 0.5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 232 |ALTITUDE |W +/- 79999 |ft/ | | 5 |500 |BCD | | |
| |RATE |0 TO |mn | | | | | | |
| | |+/- 20,000 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 233 |STATIC AIR|W +/- 799 |Deg.| | 2 |500 |BCD | | |
| |TEMP |-99 to +80 |C | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 234 |BARO |W +/- 7999.9|hPa | | 5 |500 |BCD | | |
| |CORRECT 1 |745 to 1100 | | | | | | | |
| | |R 0.1 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 235 |BARO |W +/- 79.999|inHg| | 5 |500 |BCD | | |
| |CORRECT 1 |22.0 to 32.5| | | | | | | |
| | |R 0.001 | | | | | | | |
| | |+/- 0.0074 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 236 |BARO |W +/- 7999.9|hPa | | 5 |500 |BCD | | |
| |CORRECT 2 |745 to 1100 | | | | | | | |
R
EFF :
001-050, 34-13-00
Page 8
Config-3 Feb 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |R 0.1 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 237 |BARO |W +/- 79.999|inHg| | 5 |500 |BCD | | |
| |CORRECT 2 |22.0 to 32.5| | | | | | | |
| | |R 0.001 | | | | | | | |
| | |+/- 0.0074 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 240 |VMO/MMO | | | | |500 |BCD | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 241 |CORRECTED |W +/- 180 |Deg.| 29 | 12 | 62 |BNR | AOA | |
| |ANGLE OF |-40 to +90 | | | | | | | |
| |ATTACK |R 0.0439 | | | | | | | |
| | |+/- 0.25 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 242 |TOTAL |W2048 |hPa | | 18 |125 |BNR | | |
| |PRESSURE |100 to 1400 | | | | | | | |
| | |R 0.0078 | | | | | | | |
| | |+/- 0.30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 245 |UNCRCTD |W2048 |hPa | | 18 |125 |BNR | | |
| |AVG STAT |100 to 1100 | | | | | | | |
| |PRESSURE |R 0.0078 | | | | | | | |
| | |+/- 0.30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 246 |CORCTD |W2048 |hPa | | 18 |125 |BNR | | |
| |AVG STAT |100 to 1100 | | | | | | | |
| |PRESSURE |R 0.0078 | | | | | | | |
| | |+/- 0.30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 270 |DSCT WORD | | | | |500 |DIS | | |
| | 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 271 |DSCT WORD | | | | |500 |DIS | | |
| | 2 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 272 |DSCT WORD | | | | |500 |DIS | | |
| | 3 | | | | | | | | |
R
EFF :
001-050, 34-13-00
Page 9
Config-3 Feb 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 277 |ADR TEST | | | | |1000|DIS | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 352 |DSCT WORD | | | | |1000|DIS | | |
| | 4 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 354 |LRU IDENT | | | | |500 |ISO | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 356 | CFDIU | | | | | |ISO | | |
| |INTFC WORD| | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 377 |EQPT IDENT| | | | |1000|HEX | | |
-------------------------------------------------------------------------------
Table 7 - Output Label
EFF :
001-050, 053-099, 34-13-00
Page 10
Config-3 Feb 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
R | |ALT 1 |-2000 to | | | | | | | |
R | | | 50000 | | | | | | | |
R | | |R 1 | | | | | | | |
R | | |+/-47 | | | | | | | |
R | | |(30,000) | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 205 |MACH |W4096 |Mach| | 16 | 125|BNR | MN | |
R | | |0.1 to 1.00 | | | | | | | |
R | | |R 6.25 E-5 | | | | | | | |
R | | |+/-0.015 | | | | | | | |
R | | |(0.1) | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 206 |COMPUTED |W1024 |Kts | | 14 | 125|BNR | CAS | |
R | |AIRSPEED |30 to 450 | | | | | | | |
R | | |R 0.0625 | | | | | | | |
R | | |2 (100) | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 207 |MAXIMUM |W1024 |Kts | | 12 | 125|BNR | | |
R | |ALLOWABLE |150 to 450 | | | | | | | |
R | |AIRSPEED |R 0.25 | | | | | | | |
R | | |+/- 1 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 210 |TRUE |W2048 |Kts | | 15 | 125|BNR | | |
R | |AIRSPEED |60 to 599 | | | | | | | |
R | | |R 0.0625 | | | | | | | |
R | | |+/- 4 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 211 |TOTAL AIR |W +/- 512 |Deg.| 29 | 11 | 500|BNR | TAT | |
R | |TEMP |-60 to +100 |C | | | | | | |
R | | |R 0.25 | | | | | | | |
R | | |+/- 0.5 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 212 |ALTITUDE |W+/- 32768 |ft/ | 29 | 11 | 62 |BNR | | |
R | |RATE |+/- 20000 |mn | | | | | | |
R | | |R 2 | | | | | | | |
R | | |+/- 30 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 213 |STATIC AIR|W+/- 512 |Deg.| 29 | 11 | 500|BNR | SAT | |
R
EFF :
053-099, 34-13-00
Page 11
Config-3 Feb 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
R | |TEMP |-99 to +80 |C | | | | | | |
R | | |R 0.25 | | | | | | | |
R | | |+/- 1 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 215 |IMPACT |W512 |hPa | | 16 | 125|BNR | | |
R | |PRESSURE |0 to 372.5 | | | | | | | |
R | | |R 0.0078 | | | | | | | |
R | | |+/- 0.25 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 220 |BARO CORR |W +/- 131072| ft | 29 | 17 | 62 |BNR | | |
R | |ALT 2 |-2000 to | | | | | | | |
R | | | 50000 | | | | | | | |
R | | |R 1 | | | | | | | |
R | | |47 (30,000) | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 221 |IND ANGLE |W +/- 180 |Deg.| 29 | 12 | 62 |BNR | | |
R | |OF ATTACK |-40 to +90 | | | | | | | |
R | | |R 0.0439 | | | | | | | |
R | | |+/- 0.25 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 230 |TRUE |W +/- 799 |Kts | | 3 | 500|BCD | | |
R | |AIRSPEED |60 to 599 | | | | | | | |
R | | |R 1 | | | | | | | |
R | | |+/- 4 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 231 |TOTAL AIR |W +/- 799 |Deg.| | 2 | 500|BCD | | |
R | |TEMP |-60 to +100 |C | | | | | | |
R | | |R 1 | | | | | | | |
R | | |+/- 0.5 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 232 |ALTITUDE |W +/- 79999 |ft/ | | 5 | 500|BCD | | |
R | |RATE |0 TO |mn | | | | | | |
R | | |+/- 20,000 | | | | | | | |
R | | |R 1 | | | | | | | |
R | | |+/- 30 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 233 |STATIC AIR|W +/- 799 |Deg.| | 2 | 500|BCD | | |
R | |TEMP |-99 to +80 |C | | | | | | |
EFF :
053-099, 34-13-00
Page 12
Config-3 Feb 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
R | | |R 1 | | | | | | | |
R | | |+/- 1 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 234 |BARO |W +/- 7999.9|hPa | | 5 | 500|BCD | | |
R | |CORRECT 1 |745 to 1100 | | | | | | | |
R | | |R 0.1 | | | | | | | |
R | | |+/- 0.25 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 235 |BARO |W +/- 79.999|inHg| | 5 | 500|BCD | | |
R | |CORRECT 1 |22.0 to 32.5| | | | | | | |
R | | |R 0.001 | | | | | | | |
R | | |+/- 0.0074 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 236 |BARO |W +/- 7999.9|hPa | | 5 | 500|BCD | | |
R | |CORRECT 2 |745 to 1100 | | | | | | | |
R | | |R 0.1 | | | | | | | |
R | | |+/- 0.25 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 237 |BARO |W +/- 79.999|inHg| | 5 | 500|BCD | | |
R | |CORRECT 2 |22.0 to 32.5| | | | | | | |
R | | |R 0.001 | | | | | | | |
R | | |+/- 0.0074 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 240 |VMO/MMO | | | | | 500|BCD | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 241 |CORRECTED |W +/- 180 |Deg.| 29 | 12 | 62 |BNR | AOA | |
R | |ANGLE OF |-40 to +90 | | | | | | | |
R | |ATTACK |R 0.0439 | | | | | | | |
R | | |+/- 0.25 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 242 |TOTAL |W2048 |hPa | | 18 | 125|BNR | | |
R | |PRESSURE |100 to 1400 | | | | | | | |
R | | |R 0.0078 | | | | | | | |
R | | |+/- 0.30 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 245 |UNCRCTD |W2048 |hPa | | 18 | 125|BNR | | |
R | |AVG STAT |100 to 1100 | | | | | | | |
R | |PRESSURE |R 0.0078 | | | | | | | |
EFF :
053-099, 34-13-00
Page 13
Config-3 Feb 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
R | | |+/- 0.30 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 246 |CORCTD |W2048 |hPa | | 18 | 125|BNR | | |
R | |AVG STAT |100 to 1100 | | | | | | | |
R | |PRESSURE |R 0.0078 | | | | | | | |
R | | |+/- 0.30 | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 270 |DSCT WORD | | | | | 500|DIS | | |
R | | 1 | | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 271 |DSCT WORD | | | | | 500|DIS | | |
R | | 2 | | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 272 |DSCT WORD | | | | | 500|DIS | | |
R | | 3 | | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 277 |ADR TEST | | | | |1000|DIS | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 350 |DSCT WORD | | | | | 500|DIS | | |
R | | 4 | | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 352 |DSCT WORD | | | | |1000|DIS | | |
R | | 4 | | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 354 |LRU IDENT | | | | | 500|ISO | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 356 | CFDIU | | | | | |ISO | | |
R | |INTFC WORD| | | | | | | | |
R |--------------|----------|------------|----|----|----|----|----|-----|-------|
R | 377 |EQPT IDENT| | | | |1000|HEX | | |
R -------------------------------------------------------------------------------
R Table 7 - Output Label
EFF :
053-099, 34-13-00
Page 14
Config-3 Feb 01/08
TAI
R **ON A/C 001-050, 053-099,
------------------------------------------------------------------------------
| LABEL | PARAMETER DEFINITION | SSM | ON GND CRITERION |
------------------------------------------------------------------------------
| 047 | S/W Ident | NO | |
| 203 | Altitude | NO | |
| 204 | Baro Corr Alt 1 | NO | |
| 220 | Baro Corr Alt 2 | NO | |
| 251 | Baro Corr Alt 3 | NO | |
| 205 | Mach | NCD | 0 Mach less than 0.1 |
| 206 | Computed Airspeed | NCD | 0 kt CAS less than 30 kts |
| 207 | Max Allowable Airspeed | NO | |
| 210 | True Airspeed | NCD | 0 kt CAS less than 60 kts |
| 211 | Total Air Temp | NO | |
| 212 | Altitude Rate | NO | |
| 213 | Static Air Temp | NO | |
| 215 | Impact Pressure | NO | |
| 221 | Indicated AOA | NCD | NOTE CAS less than 60 kts |
| 230 | True Airspeed | NCD | 0 kt CAS less than 60 kts |
| 231 | Total Air Temp | NO | |
| 232 | Altitude Rate | NO | |
| 233 | Static Air Temp | NO | |
| 234 | Baro Corr (hPa) 1 | NO | |
| 236 | Baro Corr (hPa) 2 | NO | |
| 235 | Baro Corr (in.Hg) 1 | NO | |
| 237 | Baro Corr (in.Hg) 2 | NO | |
| 240 | VMO/MMO | NO | |
| 241 | Corrected AOA | NCD | Cmptd value CAS less than 60Kts |
| 242 | Total Pressure | NO | |
| 176 | L. Static Pressure | NO | |
| 177 | R. Static Pressure | NO | |
| 245 | Uncrctd Avg Stat Pressure| NO | |
| 246 | Corctd Avg Stat Pressure | NO | |
| 270 | Discrete word 1 | NO | |
| 271 | Discrete word 2 | NO | |
| 272 | Discrete word 3 | NO | |
| 277 | ADR test | NO | |
| 352 | Discrete word 4 | NO | |
| 354 | LRU ident | NO | |
| 377 | Equipement ident | NO | |
| 356 | CFDIU interface word | N/A | N/A |
------------------------------------------------------------------------------
Table 16 - Output Label Value on Ground
EFF :
001-050, 053-099, 34-13-00
Page 15
Config-3 Feb 01/08
TAI
OVERSPEED VFE/VLE Message
Figure 003
EFF :
053-099, 34-13-00
Page 16
Config-3 Feb 01/08
TAI
AIR DATA - REMOVAL/INSTALLATION
_______________________________
TASK 34-13-00-040-001
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-13-00-865-070
A. On the circuit breaker panels 49VU, 121VU and 122VU, close the circuit
breakers related to the NAVIGATION, EIS, FCU, CFDS and LGCIU systems.
Subtask 34-13-00-860-081
EFF :
ALL 34-13-00
Page 401
Feb 01/08
TAI
(3) Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).
(4) On the MCDU, get the SYSTEM REPORT/TEST NAV menu page
(Ref. TASK 31-32-00-860-010)
4. Procedure
_________
Subtask 34-13-00-710-056
A. Overspeed Check
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the 3 OFF/NAV/ATT selector The OFF legend of the 3 ADR pushbutton
switches to NAV. switches must be off.
- push the ADR3 pushbutton The related OFF legend comes on.
switch.
- push the line key adjacent to The ADIRS ADR1 (ADR2) 1/2 page comes
the ADC1 (ADC2) indication. into view.
- push the line key adjacent to The ADIRS ADR1 (ADR2) INTERFACE TEST
the INTERFACE TEST indication. page comes into view.
EFF :
ALL 34-13-00
Page 402
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- the black and red strip comes into
view on the speedscale on the CAPT
(F/O) PFD
- ignore the related warnings.
- Push the line key adjacent to The test procedure stops, the warnings
the RETURN/TEST STOP above stop.
indication.
Subtask 34-13-00-710-056-A
A. Overspeed Check
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the 3 OFF/NAV/ATT selector The OFF legend of the 3 ADR pushbutton
switches to NAV. switches must be off.
- push the ADR3 pushbutton The related OFF legend comes on.
switch.
- push the line key adjacent to The ADR1 (ADR2) page comes into view.
the ADC1 (ADC2) indication.
- push the line key adjacent to The ADR1 (ADR2) OUTPUT TESTS page comes
the OUTPUT TESTS indication. into view.
- push the line key adjacent to The ADR1 (ADR2) INTERFACE TEST 1/2 page
the INTERFACE TEST indication. comes into view.
- on the keyboard push the NEXT The ADR1 (ADR2) INTERFACE TEST 2/2 page
PAGE function key. comes into view.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-13-00
Page 403
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to From 0 to 10 seconds ignore the
the START TEST indication. warnings and indications.
(Ref. TASK 34-13-00-740-002). From 10 seconds:
- the black and red strip comes into
view on the speedscale on the CAPT
(F/O) PFD
- ignore the related warnings.
- push the line key adjacent to The test procedure stops, the warnings
the RETURN indication. above stop.
R Subtask 34-13-00-710-056-B
R A. Overspeed Check
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Set the three OFF/NAV/ATT The OFF legend of the three ADR
R selector switches to NAV. pushbutton switches must be off.
R - Push the ADR3 pushbutton The related OFF legend comes on.
R switch.
R - Push the line key adjacent to The ADR1 (ADR2) page comes into view.
R the ADC1 (ADC2) indication.
R - Push the line key adjacent to The ADR1 (ADR2) OUTPUT TESTS page comes
R the OUTPUT TESTS indication. into view.
R - Push the line key adjacent to The ADR1 (ADR2) INTERFACE TEST 1/2 page
R the INTERFACE TEST indication. comes into view.
R
EFF :
301-399, 401-499, 34-13-00
Page 404
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - On the keyboard push the NEXT The ADR1 (ADR2) INTERFACE TEST 2/2 page
R PAGE function key. comes into view.
R - Push the line key adjacent to The test procedure stops, the warnings
R the RETURN indication. above stop.
5. Close-up
________
Subtask 34-13-00-860-082
(1) On the ECAM control panel, set the LOWER DISPLAY and the UPPER
DISPLAY potentiometers to OFF.
EFF :
ALL 34-13-00
Page 405
Nov 01/08
TAI
TASK 34-13-00-440-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
R Not Applicable
3. __________
Job Set-up
Subtask 34-13-00-869-085
A. Not Applicable
4. Procedure
_________
Subtask 34-13-00-810-050
EFF :
ALL 34-13-00
Page 406
May 01/08
TAI
AIR DATA - ADJUSTMENT/TEST
__________________________
TASK 34-13-00-710-001
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-13-00-860-056
EFF :
ALL 34-13-00
Page 501
May 01/05
TAI
Subtask 34-13-00-010-057
B. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-13-00-865-063
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-13-00
Page 502
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU ADIRS/ADIRU/2/26VAC AND AOA 5FP2 N08
121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N07
121VU ADIRS/ADIRU/2/115VAC 4FP2 N06
121VU ADIRS/ADIRU/3/115VAC 4FP3 N05
121VU ADIRS/ADIRU/2/28VDC 6FP2 N04
121VU ADIRS/ADIRU/3/28VDC 6FP3 N03
Subtask 34-13-00-860-057
(1) Do the EIS start procedure (PFDs and NDs only) (Ref. TASK 31-60-00-
860-001).
(4) On the CAPT and F/O main instrument panels, on the PFDs:
- make sure that the altitude and airspeed data come into view.
EFF :
ALL 34-13-00
Page 503
Feb 01/08
R
TAI
4. Procedure
_________
Subtask 34-13-00-710-050
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR1 pushbutton On the ADIRS CDU, the OFF legend of the
switch. ADR1 pushbutton switch comes on
On the CAPT PFD, the speed and altitude
indications go out of view (ignore the
related flag warnings).
- set the AIR DATA selector - the speed and altitude indications
switch to CAPT/3 from the ADR3 come into view.
- set the AIR DATA selector - the speed and altitude indications go
switch to NORM. out of view (ignore the related flag
warnings).
3. On the ADIRS CDU: On the ADIRS CDU, the OFF legend of the
- push the ADR2 pushbutton ADR2 pushbutton switch comes on
switch. On the F/O PFD, the speed and altitude
indications go out of view (ignore the
related flag warnings).
- set the AIR DATA selector - the speed and altitude indications
switch to F/O/3 from the ADR3 come into view
- set the AIR DATA selector - the speed and altitude indications go
switch to NORM. out of view (ignore the related flag
warnings).
EFF :
ALL 34-13-00
Page 504
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
5. On the ADIRS CDU:
- push the ADR1 and ADR2 On the ADIRS CDU, the OFF legend of the
pushbutton switches again ADR1 and ADR2 pushbutton switches goes
off
On the CAPT and F/O PFDs, the speed and
altitude indications come into view.
R Subtask 34-13-00-710-050-A
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Push the ADR1 pushbutton On the ADIRS MSU, the OFF legend of the
R switch. ADR1 pushbutton switch comes on.
R On the CAPT PFD, the speed and altitude
R indications go out of view (ignore the
R related flag warnings).
R - Set the AIR DATA selector - The speed and altitude indications
R switch to CAPT/3. from the ADR3 come into view.
R - Set the AIR DATA selector - The speed and altitude indications go
R switch to NORM. out of view (ignore the related flag
R warnings).
R 3. On the ADIRS MSU: On the ADIRS MSU, the OFF legend of the
R - Push the ADR2 pushbutton ADR2 pushbutton switch comes on.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-13-00
Page 505
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R switch. On the F/O PFD, the speed and altitude
R indications go out of view (ignore the
R related flag warnings).
R - Set the AIR DATA selector - The speed and altitude indications
R switch to F/O/3. from the ADR3 come into view.
R - Set the AIR DATA selector - The speed and altitude indications go
R switch to NORM. out of view (ignore the related flag
R warnings).
R - Push the ADR1 and ADR2 On the ADIRS MSU, the OFF legend of the
R pushbutton switches again. ADR1 and ADR2 pushbutton switches goes
R off.
R On the CAPT and F/O PFDs, the speed and
R altitude indications come into view.
5. Close-up
________
Subtask 34-13-00-860-058
EFF :
ALL 34-13-00
Page 506
Nov 01/08
TAI
Subtask 34-13-00-410-057
B. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-13-00
Page 507
Nov 01/08
R
TAI
TASK 34-13-00-710-002
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-13-00
Page 508
Nov 01/08
R
TAI
3. __________
Job Set-up
Subtask 34-13-00-010-052
A. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-13-00-860-059
Subtask 34-13-00-865-064
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
121VU HYDRAULIC/LGCIU/SYS2 2GA Q35
121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34
Subtask 34-13-00-865-069
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
R
EFF :
ALL 34-13-00
Page 509
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-299, 301-399,
R 401-404,
Subtask 34-13-00-860-061
(4) On the center pedestal, on one MCDU, get the SYSTEM REPORT/TEST/NAV
page (Ref. TASK 31-32-00-860-010).
(5) Make sure that the L/G doors are closed and the slats/flaps are fully
retracted.
R Subtask 34-13-00-860-061-A
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-13-00
Page 510
Nov 01/08
TAI
R (4) On the center pedestal, on one MCDU, get the SYSTEM REPORT/TEST/NAV
R page (Ref. TASK 31-32-00-860-010).
R (5) Make sure that the L/G doors are closed and the slats/flaps are fully
R retracted.
4. Procedure
_________
Subtask 34-13-00-710-051-A
NOTE : This test is for the VMO/MMO overspeed warning only. Ignore the
____
warnings and indications (VLE, ...) which are not related to this
test.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- Push the ADR2 and ADR3 - the OFF legend of the ADR2 and ADR3
pushbutton switches. pushbutton switches comes on.
- push the line key adjacent to - the ADIRS ADR1 1/2 page comes into
the ADR1 indication. view.
- push the line key adjacent to - the ADIRS ADR1 INTERFACE TEST page
the INTERFACE TEST indication. comes into view.
R
EFF :
ALL 34-13-00
Page 511
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- on the upper ECAM display unit, this
indication is shown:
OVERSPEED
VMO/MMO 350/.82
- on the panels 130VU and 131VU, the
MASTER WARN lights flash.
- you can hear the continuous
repetitive chime aural warning.
- push the line key adjacent to The SYSTEM REPORT/TEST/NAV page comes
the RETURN indication. into view.
- push the ADR2 pushbutton - the OFF legend of the ADR2 pushbutton
switch. switch goes off.
- push the ADR1 pushbutton - the OFF legend of the ADR1 pushbutton
switch. switch comes on.
4. On the MCDU:
- push the line key adjacent to Same results on the F/O PFD.
the ADR2 indication.
Do the same test as specified
in the para 2 and 3.
- push the ADR3 pushbutton On the ADIRS CDU, The OFF legend of the
switch. ADR3 pushbutton switch goes off.
6. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications from the ADR3 come into
switch to CAPT/3. view.
- push the ADR2 pushbutton On the ADIRS CDU, the OFF legend of the
switch. ADR2 pushbutton switch comes on.
EFF :
001-050, 053-099, 34-13-00
Page 512
Nov 01/08
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
8. On the MCDU:
- push the line key adjacent to Same results on the CAPT PFD.
the ADR3 indication.
Do the same test as specified
in the para 2 and 3.
- push the ADR1 and ADR2 On the ADIRS CDU, the OFF legend of the
pushbutton switches ADR1 and ADR2 pushbutton switches goes
off.
Subtask 34-13-00-710-052-A
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR2 and ADR3 - the OFF legend of the ADR2 and ADR3
pushbutton switches. pushbutton switches comes on.
- push the line key adjacent to - the ADIRS ADR1 1/2 page comes into
the ADR1 indication. view.
R
EFF :
001-050, 053-099, 34-13-00
Page 513
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADIRS ADR1 INTERFACE TEST page
the INTERFACE TEST indication. comes into view.
- push the line key adjacent to The SYSTEM REPORT/TEST/NAV page comes
the RETURN indication. into view.
- push the ADR2 pushbutton switch - the OFF legend of the ADR2 pushbutton
switch goes off.
- push the ADR1 pushbutton - the OFF legend of the ADR1 pushbutton
switch. switch comes on.
5. On the MCDU:
- push the line key adjacent to Same results on the F/O PFD.
the ADR2 indication.
Do the same test as specified
in the para 3 and 4.
- push the ADR3 pushbutton On the ADIRS CDU, the OFF legend of the
switch. ADR3 pushbutton switch goes off.
R
EFF :
001-050, 053-099, 34-13-00
Page 514
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
7. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications from the ADR3 come into
switch to CAPT/3. view.
- push the ADR2 pushbutton On the ADIRS CDU, the OFF legend of the
switch. ADR2 pushbutton switch comes on.
9. On the MCDU:
- push the line key adjacent to Same results on the CAPT PFD.
the ADR3 indication.
Do the same test as specified
in the para 3 and 4.
- push the ADR1 and ADR2 On the ADIRS CDU, the OFF legend of the
pushbutton switches. ADR1 and ADR2 pushbutton switches goes
off.
Subtask 34-13-00-710-051-B
NOTE : This test is for the VMO/MMO overspeed warning only. Ignore the
____
warnings and indications (VLE, ...) which are not related to this
test.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-13-00
Page 515
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR2 and ADR3 - the OFF legend of the ADR2 and ADR3
pushbutton switches. pushbutton switches comes on.
- push the line key adjacent to - the ADR1 page comes into view.
the ADR1 indication.
- push the line key adjacent to - the ADR1 OUTPUT TESTS page comes into
the OUTPUT TESTS indication. view.
- push the line key adjacent to - the ADR1 INTERFACE TEST 1/2 page
the INTERFACE TEST indication. comes into view.
- on the keyboard push the NEXT - the ADR1 INTERFACE TEST 2/2 page
PAGE function key. comes into view.
- push the line key adjacent to The SYSTEM REPORT/TEST/NAV page comes
the RETURN indication. into view.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-13-00
Page 516
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR2 pushbutton - the OFF legend of the ADR2 pushbutton
switch. switch goes off.
- push the ADR1 pushbutton - the OFF legend of the ADR1 pushbutton
switch. switch comes on.
4. On the MCDU:
- push the line key adjacent to Same results on the F/O PFD.
the ADR2 indication.
Do the same test as specified
in the para 2 and 3.
- push the ADR3 pushbutton On the ADIRS CDU, the OFF legend of the
switch. ADR3 pushbutton switch goes off.
6. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications from the ADR3 come into
switch to CAPT/3. view.
- push the ADR2 pushbutton On the ADIRS CDU, the OFF legend of the
switch. ADR2 pushbutton switch comes on.
8. On the MCDU:
- push the line key adjacent to Same results on the CAPT PFD.
the ADR3 indication.
Do the same test as specified
in the para 2 and 3.
- push the ADR1 and ADR2 On the ADIRS CDU, the OFF legend of the
pushbutton switches ADR1 and ADR2 pushbutton switches goes
off.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-13-00
Page 517
Nov 01/08
TAI
Subtask 34-13-00-710-052-B
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR2 and ADR3 - the OFF legend of the ADR2 and ADR3
pushbutton switches. pushbutton switches comes on.
- push the line key adjacent to - the ADR1 page comes into view.
the ADR1 indication.
- push the line key adjacent to - the ADR1 OUTPUT TESTS page comes into
the OUTPUT TESTS indication. view.
- push the line key adjacent to - the ADR1 INTERFACE TEST 1/2 page
the INTERFACE TEST indication. comes into view.
- on the keyboard push the NEXT - the ADR1 INTERFACE TEST 2/2 page
PAGE function key. comes into view.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-13-00
Page 518
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- you can hear the continuous
repetitive chime aural warning.
- push the line key adjacent to The SYSTEM REPORT/TEST/NAV page comes
the RETURN indication. into view.
- push the ADR2 pushbutton switch - the OFF legend of the ADR2 pushbutton
switch goes off.
- push the ADR1 pushbutton - the OFF legend of the ADR1 pushbutton
switch. switch comes on.
5. On the MCDU:
- push the line key adjacent to Same results on the F/O PFD.
the ADR2 indication.
Do the same test as specified
in the para 3 and 4.
- push the ADR3 pushbutton On the ADIRS CDU, the OFF legend of the
switch. ADR3 pushbutton switch goes off.
7. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications from the ADR3 come into
switch to CAPT/3. view.
- push the ADR2 pushbutton On the ADIRS CDU, the OFF legend of the
switch. ADR2 pushbutton switch comes on.
9. On the MCDU:
- push the line key adjacent to Same results on the CAPT PFD.
the ADR3 indication.
Do the same test as specified
in the para 3 and 4.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-13-00
Page 519
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
10. ON the ADIRS CDU:
- push the ADR1 and ADR2 On the ADIRS CDU, the OFF legend of the
pushbutton switches. ADR1 and ADR2 pushbutton switches goes
off.
R Subtask 34-13-00-710-051-C
R NOTE : This test is for the VMO/MMO overspeed warning only. Ignore the
____
R warnings and indications (VLE, ...) which are not related to this
R test.
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Push the ADR2 and ADR3 - The OFF legend of the ADR2 and ADR3
R pushbutton switches. pushbutton switches comes on.
R - Push the line key adjacent to - The ADR1 page comes into view.
R the ADR1 indication.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 520
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - Push the line key adjacent to - The ADR1 OUTPUT TESTS page comes into
R the OUTPUT TESTS indication. view.
R - Push the line key adjacent to - The ADR1 INTERFACE TEST 1/2 page
R the INTERFACE TEST indication. comes into view.
R - On the keyboard push the NEXT - The ADR1 INTERFACE TEST 2/2 page
R PAGE function key. comes into view.
R - Push the line key adjacent to The SYSTEM REPORT/TEST/NAV page comes
R the RETURN indication. into view.
R - Push the ADR2 pushbutton - The OFF legend of the ADR2 pushbutton
R switch. switch goes off.
R - Push the ADR1 pushbutton - The OFF legend of the ADR1 pushbutton
R switch. switch comes on.
R 4. On the MCDU:
R - Push the line key adjacent to Same results on the F/O PFD.
R the ADR2 indication.
R Do the same test as specified
R in the para 2 and 3.
R
EFF :
405-499, 34-13-00
Page 521
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R 5. On the ADIRS CDU:
R - Push the ADR3 pushbutton On the ADIRS CDU, the OFF legend of the
R switch. ADR3 pushbutton switch goes off.
R 6. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
R - Set the AIR DATA selector indications from the ADR3 come into
R switch to CAPT/3. view.
R - Push the ADR2 pushbutton On the ADIRS MSU, the OFF legend of the
R switch. ADR2 pushbutton switch comes on.
R 8. On the MCDU:
R - Push the line key adjacent to Same results on the CAPT PFD.
R the ADR3 indication.
R Do the same test as specified
R in the para 2 and 3.
R - Push the ADR1 and ADR2 On the ADIRS MSU, the OFF legend of the
R pushbutton switches ADR1 and ADR2 pushbutton switches goes
R off.
R
EFF :
405-499, 34-13-00
Page 522
Nov 01/08
TAI
R Subtask 34-13-00-710-052-C
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Push the ADR2 and ADR3 - The OFF legend of the ADR2 and ADR3
R pushbutton switches. pushbutton switches comes on.
R - Push the line key adjacent to - The ADR1 page comes into view.
R the ADR1 indication.
R - Push the line key adjacent to - The ADR1 OUTPUT TESTS page comes into
R the OUTPUT TESTS indication. view.
R - Push the line key adjacent to - The ADR1 INTERFACE TEST 1/2 page
R the INTERFACE TEST indication. comes into view.
R - On the keyboard push the NEXT - The ADR1 INTERFACE TEST 2/2 page
R PAGE function key. comes into view.
R
EFF :
405-499, 34-13-00
Page 523
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - On the F/O and CAPT glareshield
R panels 130VU and 131VU, the MASTER
R WARN lights flash.
R - You can hear the continuous
R repetitive chime aural warning.
R - Push the line key adjacent to The SYSTEM REPORT/TEST/NAV page comes
R the RETURN indication. into view.
R - Push the ADR2 pushbutton - The OFF legend of the ADR2 pushbutton
R switch. switch goes off.
R - Push the ADR1 pushbutton - The OFF legend of the ADR1 pushbutton
R switch. switch comes on.
R 5. On the MCDU:
R - Push the line key adjacent to Same results on the F/O PFD.
R the ADR2 indication.
R Do the same test as specified
R in the para 3 and 4.
R - Push the ADR3 pushbutton On the ADIRS MSU, the OFF legend of the
R switch. ADR3 pushbutton switch goes off.
R 7. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
R - Set the AIR DATA selector indications from the ADR3 come into
R switch to CAPT/3. view.
R - Push the ADR2 pushbutton On the ADIRS MSU, the OFF legend of the
R switch. ADR2 pushbutton switch comes on.
R 9. On the MCDU:
R
EFF :
405-499, 34-13-00
Page 524
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - Push the line key adjacent to Same results on the CAPT PFD.
R the ADR3 indication.
R Do the same test as specified
R in the para 3 and 4.
R - Push the ADR1 and ADR2 On the ADIRS MSU, the OFF legend of the
R pushbutton switches. ADR1 and ADR2 pushbutton switches goes
R off.
5. Close-up
________
Subtask 34-13-00-860-062
(4) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
R
EFF :
ALL 34-13-00
Page 525
Nov 01/08
TAI
Subtask 34-13-00-865-065
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
7XE, 5CC1, 5CC2
Subtask 34-13-00-860-060
Subtask 34-13-00-410-052
D. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
(2) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-13-00
Page 526
Nov 01/08
R
TAI
TASK 34-13-00-710-003
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-13-00-860-063
EFF :
ALL 34-13-00
Page 527
Nov 01/08
R
TAI
Subtask 34-13-00-865-066
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
121VU HYDRAULIC/LGCIU/SYS2 2GA Q35
121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34
Subtask 34-13-00-865-071
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
Subtask 34-13-00-860-065
(3) When the circuit breakers 5CC1 and 5CC2 are open:
- - the AUTO FLT FAC 1+2 FAULT message and the MASTER CAUT light
come on
- - you can hear the single chime.
(4) Before the test, on the ECAM Control Panel, push the CLR key to clear
the message.
(5) On the glareshield 13VU, on the CAPT and F/O EFIS control sections of
the FCU, set the mode selector switch to ROSE/NAV.
EFF :
ALL 34-13-00
Page 528
Nov 01/08
TAI
(6) On the center pedestal, on one MCDU, get the SYSTEM REPORT/TEST/NAV
menu page.
(Ref. TASK 31-32-00-860-010).
4. Procedure
_________
Subtask 34-13-00-710-053
NOTE : This test is for the system 1. For the systems 2 and 3, use the
____
indications between parentheses.
NOTE : For system 3, on the center pedestal, set the SWITCHING/AIR DATA
____
selector switch 15FP to CAPT (F/O) position; the CAPT (F/O) PFD
shows the ADR3 indications.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- pull the baro reference The baro display (above the baro
selector knob. reference selector knob) shows STD.
The CAPT and F/O PFDs show the altitude
related to the standard barometric
pressure.
Below this indication the PFDs show
STD.
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) 1/2 page
the ADR1 (ADR2) (ADR3) comes into view.
indication.
- push the NEXT PAGE function - the ADIRS ADR1 (ADR2) (ADR3) 2/2 page
key. comes into view.
EFF :
ALL 34-13-00
Page 529
Nov 01/08
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ALT DYNAMIC SLEW TEST page comes
the ALT DYNAMIC SLEW TEST into view.
indication.
EFF :
001-050, 053-099, 34-13-00
Page 530
Nov 01/08
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to
the RETURN indication until the
CFDS menu page comes into view.
Subtask 34-13-00-710-053-A
NOTE : This test is for the system 1. For the systems 2 and 3, use the
____
indications between parentheses.
NOTE : For system 3, on the center pedestal, set the SWITCHING/AIR DATA
____
selector switch 15FP to CAPT (F/O) position; the CAPT (F/O) PFD
shows the ADR3 indications.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- pull the baro reference The baro display (above the baro
selector knob. reference selector knob) shows STD.
The CAPT and F/O PFDs show the altitude
related to the standard barometric
pressure.
Below this indication the PFDs show
STD.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) page comes
the ADR1 (ADR2) (ADR3) into view.
indication.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-13-00
Page 531
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) OUTPUT TESTS
the OUTPUT TESTS indication. page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) SLEW TESTS
the SLEW TESTS indication. page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) ALT DYNAMIC
the ALT DYNAMIC SLEW SLEW page comes into view.
indication.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 532
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
NOTE : After the ADR3 test, set
____
the AIR DATA selector
switch 15FP to NORMAL.
5. Close-up
________
Subtask 34-13-00-860-066
(1) On the CAPT and F/O EFIS control sections of the FCU, push the baro
reference selector knob.
Subtask 34-13-00-865-072
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5CC1, 5CC2
Subtask 34-13-00-860-064
C. Close Access
(2) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-13-00
Page 533
Nov 01/08
TAI
TASK 34-13-00-710-004
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-13-00-860-067
EFF :
ALL 34-13-00
Page 534
Nov 01/08
R
TAI
Subtask 34-13-00-010-058
B. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-13-00-865-067
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-13-00
Page 535
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-299, 301-399,
Subtask 34-13-00-865-073
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
Subtask 34-13-00-860-069
(2) On the center pedestal, on one MCDU, get the SYSTEM REPORT/TEST/NAV
page
(Ref. TASK 31-32-00-860-010).
4. Procedure
_________
Subtask 34-13-00-710-054
NOTE : This test is for the system 1. For the other system(s), use the
____
indications between the parentheses.
NOTE : This test is an example of the altitude ramp test. Ignore the
____
warnings which are the result of a difference in altitude between
the CAPT and F/O PFD.
EFF :
ALL 34-13-00
Page 536
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- pull the baro reference The baro display (above the baro
selector knob. reference selector knob) shows STD.
The CAPT and F/O PFDs show the altitude
related to the standard barometric
pressure and the STD indication.
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) 1/2 page
the ADR1 (ADR2) (ADR3) comes into view.
indication.
- on the keyboard, push the NEXT - the ADIRS ADR1 (ADR2) (ADR3) 2/2 page
PAGE function key. comes into view.
- push the line key adjacent to - the ALT DYNAMIC SLEW TEST page comes
the ALT DYNAMIC SLEW TEST into view.
indication.
R
EFF :
001-050, 053-099, 34-13-00
Page 537
Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
Subtask 34-13-00-710-054-A
NOTE : This test is for the system 1. For the other system(s), use the
____
indications between the parentheses.
NOTE : This test is an example of the altitude ramp test. Ignore the
____
warnings which are the result of a difference in altitude between
the CAPT and F/O PFD.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- pull the baro reference the baro display (above the baro
selector knob. reference selector knob) shows STD.
the CAPT and F/O PFDs show the altitude
related to the standard barometric
pressure and the STD indication.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) page comes
the ADR1 (ADR2) (ADR3) into view.
indication.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) OUTPUT TESTS
the OUTPUT TESTS indication. page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) SLEW TESTS
the SLEW TESTS indication. page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) ALT DYNAMIC
the ALT DYNAMIC SLEW SLEW page comes into view.
indication.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page 538
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
to the ALT LIMITS (FT)
indication.
5. Close-up
________
Subtask 34-13-00-410-058
A. Close Access
(1) Install the protective cover on the battery power center 105VU.
Subtask 34-13-00-865-074
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5CC1, 5CC2
EFF :
ALL 34-13-00
Page 539
Nov 01/08
TAI
**ON A/C ALL
Subtask 34-13-00-860-068
(1) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
(2) On the CAPT and F/O EFIS control sections of the FCU, push the baro
reference selector knob.
(5) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-13-00
Page 540
Nov 01/08
R
TAI
TASK 34-13-00-710-005
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-13-00-860-070
EFF :
ALL 34-13-00
Page 541
Nov 01/08
R
TAI
Subtask 34-13-00-010-059
B. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-13-00-865-068
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-13-00
Page 542
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-299, 301-399,
Subtask 34-13-00-865-075
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
Subtask 34-13-00-860-072
(2) on the center pedestal, on the MCDU, get the SYSTEM REPORT/TEST/NAV
page
(Ref. TASK 31-32-00-860-010).
(3) Put the safety barriers in position around the RAT area.
4. Procedure
_________
Subtask 34-13-00-710-055-A
NOTE : This test is for the system 1. For the other system(s), use the
____
indications between the parentheses.
NOTE : This test is an example of the CAS ramp test. Ignore the warnings
____
which are the result of an overspeed.
EFF :
ALL 34-13-00
Page 543
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) 1/2 page
the ADR1 (ADR2) (ADR3) comes into view.
indication.
- on the keyboard, push the NEXT - the ADIRS ADR1 (ADR2) (ADR3) 2/2 page
PAGE function key. comes into view.
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) CAS
the CAS DYNAMIC SLEW TEST DYNAMIC SLEW TEST page comes into
indication. view.
- on the keyboard, enter these - the slew limits set come into view
limits: 175/225 and push the below the related indication.
line key adjacent to the SET
CAS SLEW LIMITS indication.
- on the keyboard, enter this - the slew rate comes into view below
slew rate: 0020 and push the the related indication.
line key adjacent to the SET
CAS SLEW RATE indication.
- push the line key adjacent to On the CAPT and F/O PFDs:
the UP-START SLEW indication. - the speed scale moves from 175 Kts to
225 Kts.
The warnings above stop.
Subtask 34-13-00-710-055-B
NOTE : This test is for the system 1. For the other system(s), use the
____
indications between the parentheses.
NOTE : This test is an example of the CAS ramp test. Ignore the warnings
____
which are the result of an overspeed.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-13-00
Page 544
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) page comes
the ADR1 (ADR2) (ADR3) into view.
indication.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) OUTPUT TESTS
OUTPUT TESTS indication. page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) SLEW TESTS
SLEW TESTS indication. page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) CAS DYNAMIC
the CAS DYNAMIC SLEW SLEW page comes into view.
indication.
- on the keyboard, enter these - the slew limits set come into view
limits: 175/225 and push the below the related indication.
line key adjacent to the CAS
LIMITS (FT) indication.
- on the keyboard, enter this - the slew rate comes into view below
slew rate: 0020 and push the the related indication.
line key adjacent to the CAS
SLEW RATE (FT/MIN) indication.
- push the line key adjacent to On the CAPT and F/O PFDs:
the UP-START SLEW indication. - the speed scale moves from 175 Kts to
225 Kts.
The warnings above stop.
5. Close-up
________
Subtask 34-13-00-410-059
A. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-13-00
Page 545
Nov 01/08
R
TAI
(3) Close the access door 822.
Subtask 34-13-00-865-076
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5CC1, 5CC2, 7XE
Subtask 34-13-00-860-071
(1) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
(5) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF :
ALL 34-13-00
Page 546
Nov 01/08
TAI
TASK 34-13-00-710-006
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
This test controls the angle of attack (AOA) sensors to the special test
position.
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-13-00-860-073
A. Not Applicable
4. Procedure
_________
Subtask 34-13-00-710-060
R
EFF :
ALL 34-13-00
Page 547
Nov 01/08
TAI
TASK 34-13-00-710-007
Operational Test of the Overspeed Warnings in the Slats/Flaps and Landing Gear
Extended (VFE/VLE) Configuration
NOTE : This test is for the system 1. For the systems 2 and 3, use the
____
indications between parentheses.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R
EFF :
ALL 34-13-00
Page 548
Nov 01/08
TAI
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-13-00-860-050
(2) Make sure that the nose landing gear doors are closed
(Ref. TASK 32-22-00-410-001).
Subtask 34-13-00-860-052
(2) On the center pedestal, on one MCDU, get the SYSTEM REPORT/TEST/NAV
page
(Ref. TASK 31-32-00-860-010).
(3) On the overhead panel, on the FLT CTL panels 23VU and 24VU:
- make sure that the FAC, ELAC and SEC pushbutton switches are not
pushed (in). The OFF legends are on.
(4) On the center pedestal (panel 114VU), set the flap and slat control
lever to the FULL position.
(5) On the panel 50VU, release the ENG/FADEC GND PWR/1 and ENG/FADEC GND
PWR/2 pushbutton switches. The ON legends come on.
R
EFF :
ALL 34-13-00
Page 549
Nov 01/08
TAI
Subtask 34-13-00-010-060
C. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-13-00-865-082
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
R
EFF :
ALL 34-13-00
Page 550
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N07
121VU ADIRS/ADIRU/2/115VAC 4FP2 N06
121VU ADIRS/ADIRU/3/115VAC 4FP3 N05
121VU ADIRS/ADIRU/2/28VDC 6FP2 N04
121VU ADIRS/ADIRU/3/28VDC 6FP3 N03
Subtask 34-13-00-865-085
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
Subtask 34-13-00-860-090
R
EFF :
ALL 34-13-00
Page 551
Nov 01/08
TAI
4. Procedure
_________
Subtask 34-13-00-710-057-A
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR2 and ADR3 On the ADIRS CDU, the OFF legend of the
pushbutton switches. ADR2 and ADR3 pushbutton switches comes
on.
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) 1/2 page
the ADR1 (ADR2) (ADR3) comes into view.
indication
- on the keyboard, push the NEXT - the ADIRS ADR1 (ADR2) (ADR3) 2/2 page
PAGE function key comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) SLEW TEST page
the CAS DYNAMIC SLEW TEST comes into view.
indication
- push the line key adjacent to The slew limits set come into view
the SET CAS SLEW LIMITS below the related indication.
indication
- push the line key adjacent to The slew rate set comes into view below
the SET CAS SLEW RATE the related indication.
indication
EFF :
ALL 34-13-00
Page 552
Nov 01/08
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to On the CAPT (F/O) PFD, the speed scale
the UP-START SLEW indication moves from 175 kts to 260 kts as
specified in the table below
On the upper ECAM display unit, make
sure that all the indications given in
the table below come into view
on the panels 130VU and 131VU, the
MASTER WARN lights flash when the
speeds set come into view
The continuous repetitive chime sounds
On the panels 130VU and 131VU, the
MASTER WARN lights go off when you set
the flap and slat control lever to a
lower position.
Subtask 34-13-00-710-057-B
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR2 and ADR3 On the ADIRS CDU, the OFF legend of the
pushbutton switches. ADR2 and ADR3 pushbutton switches comes
on.
- push the line key adjacent to - the SYSTEM REPORT/TEST page which
the NAV indication contains the three ADR comes into
view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) page comes
the ADR1 (ADR2) (ADR3) into view.
indication
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-13-00
Page 553
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) OUTPUT TESTS
the OUTPUT TESTS indication page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) SLEW TESTS
the SLEW TESTS indication page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) CAS DYNAMIC
the CAS DYNAMIC SLEW indication SLEW page comes into view.
- push the line key adjacent to The slew limits set come into view
the CAS LIMITS (KT) indication below the related indication.
- push the line key adjacent to The slew rate set comes into view below
the CAS SLEW RATE (KTs/MIN) the related indication.
indication
- push the line key adjacent to On the CAPT (F/O) PFD, the speed scale
the UP-START SLEW indication moves from 175 kts to 260 kts as
specified in the following table
On the upper ECAM display unit, make
sure that all the indications given in
the table below come into view
On the panels 130VU and 131VU, the
MASTER WARN lights flash when the
speeds set come into view
The continuous repetitive chime sounds
On the panels 130VU and 131VU, the
MASTER WARN lights go off when you set
the flap and slat control lever to a
lower position.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-13-00
Page 554
Nov 01/08
TAI
R **ON A/C 405-499,
R Subtask 34-13-00-710-057-C
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Push the ADR2 and ADR3 On the ADIRS MSU, the OFF legend of the
R pushbutton switches. ADR2 and ADR3 pushbutton switches comes
R on.
R - Push the line key adjacent to - The SYSTEM REPORT/TEST page which
R the NAV indication. contains the three ADR comes into
R view.
R - Push the line key adjacent to - The ADR1 (ADR2) (ADR3) page comes
R the ADR1 (ADR2) (ADR3) into view.
R indication.
R - Push the line key adjacent to - The ADR1 (ADR2) (ADR3) OUTPUT TESTS
R the OUTPUT TESTS indication. page comes into view.
R - Push the line key adjacent to - The ADR1 (ADR2) (ADR3) SLEW TESTS
R the SLEW TESTS indication. page comes into view.
R - Push the line key adjacent to - The ADR1 (ADR2) (ADR3) CAS DYNAMIC
R the CAS DYNAMIC SLEW SLEW page comes into view.
R indication.
R - Push the line key adjacent to The slew limits set come into view
R the CAS LIMITS (KT) indication. below the related indication.
R
EFF :
405-499, 34-13-00
Page 555
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - Push the line key adjacent to The slew rate set comes into view below
R the CAS SLEW RATE (KTs/MIN) the related indication.
R indication.
R - Push the line key adjacent to On the CAPT (F/O) PFD, the speed scale
R the UP-START SLEW indication. moves from 175 kts to 260 kts as
R specified in the following table.
R On the upper ECAM display unit, make
R sure that all the indications given in
R the table below come into view.
R On the F/O and CAPT glareshield panels
R 130VU and 131VU, the MASTER WARN lights
R flash when the speeds set come into
R view.
R The continuous repetitive chime sounds.
R On the F/O and CAPT glareshield panels
R 130VU and 131VU, the MASTER WARN lights
R go off when you set the flap and slat
R control lever to a lower position.
Subtask 34-13-00-710-061
B. Speed values
NOTE : Make sure that speed values are reached before you move the
____
flaps/slats control lever.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 405-499,
34-13-00
Page 556
Nov 01/08
TAI
-------------------------------------------------------------------------------
| SLATS AND FLAPS |
|---------------------------------|
| | |
SPEED | Position | Indication | INDICATION
IS MORE | of CTL LEVER | on the upper | ON THE UPPER ECAM
THAN | | ECAM DU | DISPLAY UNIT
| | |
---------|----------------|----------------|-----------------------------------
181 Kts | FULL | FULL | OVERSPEED
| | | - VFE 177
|----------------|----------------|-----------------------------------
| 3 | 3 | The indication goes out of view
---------|----------------|----------------|-----------------------------------
189 Kts | 3 | 3 | OVERSPEED
| | | - VFE 185
|----------------|----------------|-----------------------------------
| 2 | 2 | The indication goes out of view
---------|----------------|----------------|-----------------------------------
204 Kts | 2 | 2 | OVERSPEED
| | | - VFE 200
|----------------|----------------|-----------------------------------
| 1 | 1+F | The indication goes out of view
---------|----------------|----------------|-----------------------------------
219 Kts | 1 | 1+F | OVERSPEED
| | | - VFE 215
---------|----------------|----------------|-----------------------------------
234 Kts | 1 | 1+F | OVERSPEED
(or equal) | | - VFE 215
|----------------|----------------|-----------------------------------
| | | When OVERSPEED
| 0 | 0 | - VFE 215
| | | indication goes out of view:
| | | OVERSPEED
| | | - VFE 230
| | |this indication can come into view
| | |for some seconds then goes out of
| | |view.
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399,
34-13-00
Page 557
Nov 01/08
TAI
**ON A/C 401-499,
Subtask 34-13-00-710-061-B
B. Speed values
NOTE : Make sure that speed values are reached before you move the
____
flaps/slats control lever.
R
EFF :
401-499, 34-13-00
Page 558
Nov 01/08
TAI
-------------------------------------------------------------------------------
| SLATS AND FLAPS |
|---------------------------------|
| | |
SPEED | Position | Indication | INDICATION
IS MORE | of CTL LEVER | on the upper | ON THE UPPER ECAM
THAN | | ECAM DU | DISPLAY UNIT
| | |
---------|----------------|----------------|-----------------------------------
194 Kts | FULL | FULL | OVERSPEED
| | | - VFE 190
|----------------|----------------|-----------------------------------
| 3 | 3 | The indication goes out of view
---------|----------------|----------------|-----------------------------------
199 Kts | 3 | 3 | OVERSPEED
| | | - VFE 195
|----------------|----------------|-----------------------------------
| 2 | 2 | The indication goes out of view
---------|----------------|----------------|-----------------------------------
219 Kts | 2 | 2 | OVERSPEED
| | | - VFE 215
|----------------|----------------|-----------------------------------
| 1 | 1+F | The indication goes out of view
| | | (215 be shown while some seconds
| | | before the following indication.)
---------|----------------|----------------|-----------------------------------
229 Kts | 1 | 1+F | The indication
| | | - VFE 225
| | | comes into view
| | |
---------|----------------|----------------|-----------------------------------
239 Kts | 1 | 1+F | The indication
R | | |
| | | - VFE 225
R |----------------|----------------| goes out of view if the indication
| | |
R
| | | OVERSPEED
| 0 | 0 | -VFE 235
R | | | comes into view (for approximately
R ---------|----------------|----------------| 1 second) then goes out of view.
R When the OVERSPEED VFE 235 goes out of |
R view or if the OVERSPEED VFE 225 remained |
R displayed, move the control lever to the |
position 1 before you reach CAS 254 Kts. |
---------|----------------|----------------|-----------------------------------
254 Kts | 1 | 1+F | OVERSPEED
| | | -VFE 225
|----------------|----------------|-----------------------------------
| | | The indication goes out of view
|----------------|----------------|-----------------------------------
| | | OVERSPEED
EFF :
401-499, 34-13-00
Page 559
Feb 01/09
TAI
-------------------------------------------------------------------------------
| SLATS AND FLAPS |
|---------------------------------|
| | |
SPEED | Position | Indication | INDICATION
IS MORE | of CTL LEVER | on the upper | ON THE UPPER ECAM
THAN | | ECAM DU | DISPLAY UNIT
| | |
---------|----------------|----------------|-----------------------------------
| | | -VFE 235
| 0 | 0 |The indication comes into view for
| | |some seconds then goes out of view.
-------------------------------------------------------------------------------
Subtask 34-13-00-860-053
Subtask 34-13-00-710-059-A
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR2 and ADR3 On the ADIRS CDU, the OFF legend of the
pushbutton switches. ADR2 and ADR3 pushbutton switches comes
on.
EFF :
ALL 34-13-00
Page 560
Feb 01/09
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) 1/2 page
the ADR1 (ADR2) (ADR3) comes into view.
indication
- on the keyboard, push the NEXT - the ADIRS ADR1 (ADR2) (ADR3) 2/2 page
PAGE function key comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) SLEW TEST page
the CAS DYNAMIC SLEW TEST comes into view.
indication
- on the keyboard, enter these - the slew limits come into view on the
limits: 275/290 bottom line (scratch pad) of the
MCDU.
- push the line key adjacent to - the slew limits set come into view
the SET CAS SLEW LIMITS below the related indication.
indication
- on the keyboard, enter this - the slew rate comes into view on the
slew rate: 025 bottom line (scratch pad) of the
MCDU.
- push the line key adjacent to - the slew rate set comes into view
the SET CAS SLEW RATE below the related indication.
indication
- push the line key adjacent to On the CAPT (F/O) PFD, the speed scale
the UP-START SLEW indication moves from 275 kts to 290 kts.
On the upper ECAM display unit, when
the CAS reaches 284 kts, make sure that
this indication comes into view:
OVERSPEED
VLE...............280/.67
On the panels 130VU and 131VU, the
MASTER WARN lights flash
The continuous repetitive chime sounds.
- push the line key adjacent to On the CAPT (F/O) PFD, the speed scale
the RETURN/STOP indication. moves down
On the panels 130VU and 131VU, the
MASTER WARN lights do not flash
The continuous repetitive chime stops.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299,
34-13-00
Page 561
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
4. On the ADIRS CDU: On the ADIRS CDU:
- push the ADR1 and ADR2 - the OFF legend of the ADR1 pushbutton
pushbutton switches. switch comes on
- the OFF legend of the ADR2 pushbutton
switch goes off.
- push the ADR2 and ADR3 - the OFF legend of the ADR2 pushbutton
pushbutton switches. switch comes on
- the OFF legend of the ADR3 pushbutton
switch goes off.
7. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications from the ADR3 come into
switch to CAPT/3. view.
- push the ADR1 and ADR2 On the ADIRS CDU, the OFF legend of the
pushbutton switches again ADR1 and ADR2 pushbutton switches goes
off.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299,
34-13-00
Page 562
Nov 01/08
TAI
R **ON A/C 301-399, 401-404,
Subtask 34-13-00-710-059-B
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR2 and ADR3 On the ADIRS CDU, the OFF legend of the
pushbutton switches. ADR2 and ADR3 pushbutton switches comes
on.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) page comes
the ADR1 (ADR2) (ADR3) into view.
indication
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) OUTPUT TESTS
the OUTPUT TESTS indication page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) SLEW TESTS
the SLEW TESTS indication page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) CAS DYNAMIC
the CAS DYNAMIC SLEW indication SLEW page comes into view.
- on the keyboard, enter these - the slew limits come into view on the
limits: 275/290 bottom line (scratch pad) of the
MCDU.
- push the line key adjacent to - the slew limits set come into view
the CAS LIMITS (FT) indication. below the related indication.
- on the keyboard, enter this - the slew rate comes into view on the
slew rate: 025 bottom line (scratch pad) of the
MCDU.
R
EFF :
301-399, 401-404, 34-13-00
Page 563
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the slew rate set comes into view
the CAS SLEW RATE (FT/MIN) below the related indication.
indication.
- push the line key adjacent to On the CAPT (F/O) PFD, the speed scale
the UP-START SLEW indication moves from 275 kts to 290 kts.
On the upper ECAM display unit, when
the CAS reaches 284 kts, make sure that
this indication comes into view:
OVERSPEED
VLE...............280/.67
On the panels 130VU and 131VU, the
MASTER WARN lights flash
The continuous repetitive chime sounds.
- push the line key adjacent to On the CAPT (F/O) PFD, the speed scale
the RETURN/STOP indication. moves down
On the panels 130VU and 131VU, the
MASTER WARN lights do not flash
The continuous repetitive chime stops.
- push the ADR1 and ADR2 - the OFF legend of the ADR1 pushbutton
pushbutton switches. switch comes on
- the OFF legend of the ADR2 pushbutton
switch goes off.
- push the ADR2 and ADR3 - the OFF legend of the ADR2 pushbutton
pushbutton switches. switch comes on
- the OFF legend of the ADR3 pushbutton
switch goes off.
7. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications from the ADR3 come into
switch to CAPT/3. view.
R
EFF :
301-399, 401-404, 34-13-00
Page 564
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
9. On the ADIRS CDU:
- push the ADR1 and ADR2 On the ADIRS CDU, the OFF legend of the
pushbutton switches again ADR1 and ADR2 pushbutton switches goes
off.
R Subtask 34-13-00-710-059-C
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Push the ADR2 and ADR3 On the ADIRS MSU, the OFF legend of the
R pushbutton switches. ADR2 and ADR3 pushbutton switches comes
R on.
R - Push the line key adjacent to - The ADR1 (ADR2) (ADR3) page comes
R the ADR1 (ADR2) (ADR3) into view.
R indication
R - Push the line key adjacent to - The ADR1 (ADR2) (ADR3) OUTPUT TESTS
R the OUTPUT TESTS indication page comes into view.
R - Push the line key adjacent to - The ADR1 (ADR2) (ADR3) SLEW TESTS
R the SLEW TESTS indication page comes into view.
R - Push the line key adjacent to - The ADR1 (ADR2) (ADR3) CAS DYNAMIC
R the CAS DYNAMIC SLEW indication SLEW page comes into view.
R
EFF :
301-399, 401-499, 34-13-00
Page 565
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - On the keyboard, enter these - The slew limits come into view on the
R limits: 275/290 bottom line (scratch pad) of the
R MCDU.
R - Push the line key adjacent to - The slew limits set come into view
R the CAS LIMITS (FT) indication. below the related indication.
R - On the keyboard, enter this - The slew rate comes into view on the
R slew rate: 025 bottom line (scratch pad) of the
R MCDU.
R - Push the line key adjacent to - The slew rate set comes into view
R the CAS SLEW RATE (FT/MIN) below the related indication.
R indication.
R - Push the line key adjacent to On the CAPT (F/O) PFD, the speed scale
R the UP-START SLEW indication moves from 275 kts to 290 kts.
R On the upper ECAM display unit, when
R the CAS reaches 284 kts, make sure that
R this indication comes into view:
R OVERSPEED
R VLE...............280/.67
R On the F/O and CAPT glareshield panels
R 130VU and 131VU, the MASTER WARN lights
R flash.
R The continuous repetitive chime sounds.
R - Push the line key adjacent to On the CAPT (F/O) PFD, the speed scale
R the RETURN/STOP indication. moves down.
R On the F/O and CAPT glareshield panels
R 130VU and 131VU, the MASTER WARN lights
R do not flash.
R The continuous repetitive chime stops.
R - Push the ADR1 and ADR2 - The OFF legend of the ADR1 pushbutton
R pushbutton switches. switch comes on.
R - The OFF legend of the ADR2 pushbutton
R switch goes off.
R
EFF :
405-499, 34-13-00
Page 566
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R 6. On the ADIRS MSU: On the ADIRS MSU:
R - Push the ADR2 and ADR3 - The OFF legend of the ADR2 pushbutton
R pushbutton switches. switch comes on.
R - The OFF legend of the ADR3 pushbutton
R switch goes off.
R 7. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
R - Set the AIR DATA selector indications from the ADR3 come into
R switch to CAPT/3. view.
R - Push the ADR1 and ADR2 On the ADIRS MSU, the OFF legend of the
R pushbutton switches again. ADR1 and ADR2 pushbutton switches goes
R off.
5. Close-up
________
Subtask 34-13-00-410-060
A. Close Access
(1) Install the protective cover on the battery power center 105VU.
R
EFF :
ALL 34-13-00
Page 567
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-299, 301-399,
Subtask 34-13-00-865-083
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5CC1, 5CC2, 7XE
Subtask 34-13-00-860-051
(3) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
(5) Close the nose landing gear doors (Ref. TASK 32-22-00-410-001).
R
EFF :
ALL 34-13-00
Page 568
Nov 01/08
TAI
**ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-219, 301-304,
TASK 34-13-00-720-009
CAUTION : OBEY THESE PRECAUTIONS WHEN YOU DO THE TEST TO PREVENT DAMAGE TO
_______
INSTRUMENTS:
- THE PRESSURES SET MUST NOT BE MORE THAN 1050 hPa (31 in Hg) OR LESS
THAN 115 hPa (3.39 in Hg)
- CHANGES IN STATIC PRESSURE MUST NOT BE MORE THAN 6000 FEET/MINUTE
- DO NOT SUDDENLY OPEN LINES TO AMBIENT AIR WHILE THE PRESSURE
GENERATOR IS CONNECTED.
CAUTION : THE TOTAL PRESSURE IN THE PITOT SYSTEM MUST NEVER BE LESS THAN THE
_______
STATIC PRESSURE. THE DIFFERENCE BETWEEN THE PITOT AND THE STATIC
PRESSURE CIRCUITS MUST NEVER BE MORE THAN 368 hPa (10.86 in Hg).
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-219, 301-304,
34-13-00
Page 569
Feb 01/09
TAI
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-13-00-860-054
(2) Do the EIS start procedure (PFD DUs only) (Ref. TASK 31-60-00-860-
001).
(4) On the SWITCHING panel 8VU, make sure that the AIR DATA selector
switch is at NORM.
(5) Make sure that the flaps are fully retracted (Ref. TASK 27-50-00-866-
009).
(6) On the FCU, set the CAPT (F/O) Baro-Correction to display STD below
the altitude scale on the CAPT (F/O) PFD .
(7) Do the Leak Test of the main Air Data System (Ref. TASK 34-13-00-790-
002).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-219, 301-304,
34-13-00
Page 570
Nov 01/08
TAI
Subtask 34-13-00-865-086
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
Subtask 34-13-00-480-050
NOTE : For this test, use a ground pressure generator with these minimum
____
requirement:
- Static (altitude): -1000ft to 50,000ft (accuracy +/-0,31mb
(0,00453psi)),
- Pitot (speed): 0 to 500kts,
- Mach Nbr: 0 to 1.000,
- Climb Rate: 0 to +/- 6000ft/mn (accuracy +/- 7%).
(1) Remove the slip on covers from the static probes and the pitot
probes.
R (2) Connect the GENERATOR - GROUND PRESSURE MINI. 100 MB to the static
and pitot probes of the aircraft:
NOTE : For the CAPT and F/O circuits, it is necessary to connect the
____
ground pressure generator to the two static probes (L and R).
For CAPT circuit (ADIRU 1) and F/O circuit (ADIRU 2), connect
the ground pressure generator to the static probes with the
ADAPTER COVER-STATIC PORT (98D34003500102):
- L static probe 1 7DA1, zone 127, STA 8750, for the L static
pressure ADM (19FP5)
- L static probe 2 7DA2, zone 127, STA 8700, for the L static
pressure ADM (19FP7)
and
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-219, 301-304,
34-13-00
Page 571
Feb 01/09
TAI
- R static probe 1 8DA1, zone 128, STA 9300, for the R static
pressure ADM (19FP4)
- R static probe 2 8DA2, zone 128, STA 9350, for the R static
pressure ADM (19FP6)
For the standby circuit (ADIRU 3), connect the ground pressure
generator to the static probes with the ADAPTER COVER-STATIC
PORT (98D34003500100):
- L static probe 3 7DA3, zone 121, STA 4250, for the static
pressure ADM (19FP8) or
- R static probe 3 8DA3, zone 122, STA 4250, for the static
pressure ADM (19FP8).
(3) Seal the drain holes of the pitot probes with a piece of platic and
colored adhesive tape.
CAUTION : WHEN YOU SEAL THE DRAIN HOLE IN THE PITOT PROBE, DO NOT
_______
SEAL THE HOLE DIRECTLY WITH THE COLORED ADHESIVE TAPE.
ALWAYS PUT A PIECE OF PLASTIC ON THE HOLE FIRST AND USE THE
COLORED ADHESIVE TAPE TO ATTACH THE PLASTIC.
IF YOU SEAL THE DRAIN HOLE DIRECTLY WITH THE ADHESIVE TAPE,
THERE IS A RISK THAT SOME OF THE ADHESIVE WILL STAY ON THE
HOLE AND COLLECT PARTICLES. THIS CAN SUBSEQUENTLY CAUSE
BLOCKAGE OF THE HOLE AND THUS INCORRECT OPERATION OF THE
PROBE.
(a) Seal the opposite static probe of the standby ADM with the
ADAPTER COVER-STATIC PORT (98D34003500103).
(4) Move the vane of the three AOA sensors to the upper position. Keep
the AOA sensors in position with colored adhesive tape.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-219, 301-304,
34-13-00
Page 572
Nov 01/08
TAI
4. Procedure
_________
Subtask 34-13-00-720-065
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On the ground pressure generator, On the CAPT and F/O PFDs, compare and
set a static pressure and a total write the altitude and airspeed values
pressure as given in the table for the ADIRU 1 and 2.
below.
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
CAPT/3. write the altitude and airspeed values
for the ADIRU 3 and 2.
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
F/O/3. write the altitude and airspeed values
for the ADIRU 1 and 3.
- slowly balance the pressure in The rate of descent must not be more
the static and total pressure than 6000 ft/mn.
lines.
- open the lines to get the
atmospheric pressure.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-219, 301-304,
34-13-00
Page 573
Nov 01/08
TAI
-------------------------------------------------------------------------------
Pressure | CAPT PFD and F/O PFD
generator | AIR DATA switch at | AIR DATA switch
| NORM | at CAPT/3 or F/O/3
------------------------------|-----------------------|------------------------
Ps | Pt | QC |Hp 1/2|Vc 1/2 |Mach 1/2| Hp 3 | Vc 3 | Mach 3
(ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) | (Kts) | | (ft) |(Kts) |
| | | | (hpa)| | +/- 2 | | | +/-2 |
-----|-----|-----|-----|------|------|-------|--------|------|------|----------
5304|833.5| 1829|948,1|114.6 | 5000 | 250 |0.413(*)| 5401 | 264 | 0.439 (*)
| | | | |+/-12 | |+/-0.004|+/- 12| |+/-0.004
-----|-----|-----|-----|------|------|-------|--------|------|------|----------
10335|687.8| 6335|801.8|114.0 |10000 | 250 |0.452(*)| 10475| 264 | 0.482 (*)
| | | | |+/-15 | |+/-0.004|+/- 15| |+/-0.004
-----|-----|-----|-----|------|------|-------|--------|------|------|----------
20463|456.7|13010|619.2|163.5 |20000 | 300 | 0.651 | 21093| 319 | 0.704
| | | | |+/- 22| |+/-0.004|+/- 22| |+/-0.004
-----|-----|-----|-----|------|------|-------|--------|------|------|----------
30515|293.9|20579|454.4|160.5 |30000 | 300 | 0.790 | 31845| 322 | 0.873
| | | | |+/- 30| |+/-0.003|+/- 30| |+/-0.003
-----|-----|-----|-----|------|------|-------|--------|------|------|----------
40487|183.2|30618|292.5|109.3 |40000 | 250 | 0.823 | 41761| 267 | 0.903
| | | | |+/- 42| |+/-0.003|+/- 42| |+/-0.003
-------------------------------------------------------------------------------
(*) These indications are not shown when the Mach value is less than 0.5.
Subtask 34-13-00-720-065-A
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On the ground pressure generator, On the CAPT and F/O PFDs, compare and
set a static pressure and a total write the altitude and airspeed values
pressure as given in the table for the ADIRU 1 and 2.
below.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-219, 301-304,
34-13-00
Page 574
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
CAPT/3. write the altitude and airspeed values
for the ADIRU 3 and 2.
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
F/O/3. write the altitude and airspeed values
for the ADIRU 1 and 3.
- slowly balance the pressure in The rate of descent must not be more
the static and total pressure than 6000 ft/mn.
lines.
- open the lines to get the
atmospheric pressure.
R
EFF :
301-304, 34-13-00
Page 575
Nov 01/08
TAI
-------------------------------------------------------------------------------
Pressure | CAPT PFD and F/O PFD
generator | AIR DATA switch at | AIR DATA switch
| NORM | at CAPT/3 or F/O/3
------------------------------|-----------------------|------------------------
Ps | Pt | QC |Hp 1/2|Vc 1/2 |Mach 1/2| Hp 3 | Vc 3 | Mach 3
(ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) | (Kts) | | (ft) |(Kts) |
| | | | (hpa)| | +/- 2 | | | +/-2 |
-----|-----|-----|-----|------|------|-------|--------|------|------|----------
5257|835.0| 1829|948,1|113.1 | 5000 | 250 |0.413(*)| 5305 | 261 | 0.433 (*)
| | | | |+/-12 | |+/-0.004|+/- 12| |+/-0.004
-----|-----|-----|-----|------|------|-------|--------|------|------|----------
10254|690.0| 6335|801.8|111.8 |10000 | 250 |0.452(*)| 10371| 261 | 0.475 (*)
| | | | |+/-15 | |+/-0.004|+/- 15| |+/-0.004
-----|-----|-----|-----|------|------|-------|--------|------|------|----------
20189|462.0|13010|619.2|157.2 |20000 | 300 | 0.651 | 20789| 314 | 0.690
| | | | |+/- 22| |+/-0.004|+/- 22| |+/-0.004
-----|-----|-----|-----|------|------|-------|--------|------|------|----------
30055|300.1|20579|454.4|154.3 |30000 | 300 | 0.790 | 31363| 316 | 0.852
| | | | |+/- 30| |+/-0.003|+/- 30| |+/-0.003
-----|-----|-----|-----|------|------|-------|--------|------|------|----------
40003|187.5|30618|292.5|105.0 |40000 | 250 | 0.823 | 41319| 263 | 0.884
| | | | |+/- 42| |+/-0.003|+/- 42| |+/-0.003
-------------------------------------------------------------------------------
(*) These indications are not shown when the Mach value is less than 0.5.
5. Close-up
________
Subtask 34-13-00-080-050
A. Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
Make sure that there is no remaining piece of plastic and/or adhesive
tape on the pitot probes and AOA sensors. Make sure the pitot drain holes
are operational and that the AOA sensors move freely.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-219, 301-304,
34-13-00
Page 576
Nov 01/08
TAI
Subtask 34-13-00-865-088
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
Subtask 34-13-00-860-055
(2) Install the slip on covers on the static probes and on the pitot
probes.
(3) Make sure that the drain holes on the pitot probes are not blocked by
unwanted materials. (Ref. TASK 34-11-15-200-001)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-219, 301-304,
34-13-00
Page 577
Nov 01/08
TAI
**ON A/C 053-099, 215-215, 218-299, 306-399, 401-499,
TASK 34-13-00-720-009-A
Functional Test of the Altitude and Airspeed Data (A/C with RVSM capability on
three ADIRUs)
CAUTION : OBEY THESE PRECAUTIONS WHEN YOU DO THE TEST TO PREVENT DAMAGE TO
_______
INSTRUMENTS:
- THE PRESSURES SET MUST NOT BE MORE THAN 1050 hPa (31 in Hg) OR LESS
THAN 115 hPa (3.39 in Hg)
- CHANGES IN STATIC PRESSURE MUST NOT BE MORE THAN 6000 FEET/MINUTE
- DO NOT SUDDENLY OPEN LINES TO AMBIENT AIR WHILE THE PRESSURE
GENERATOR IS CONNECTED.
CAUTION : THE TOTAL PRESSURE IN THE PITOT SYSTEM MUST NEVER BE LESS THAN THE
_______
STATIC PRESSURE. THE DIFFERENCE BETWEEN THE PITOT AND THE STATIC
PRESSURE CIRCUITS MUST NEVER BE MORE THAN 368 hPa (10.86 in Hg).
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
EFF :
401-499,
053-099, 215-215, 218-299, 306-399, 34-13-00
Page 578
Feb 01/09
TAI
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-13-00-860-092
(2) Do the EIS start procedure (PFD DUs only) (Ref. TASK 31-60-00-860-
001).
(4) On the SWITCHING panel 8VU, make sure that the AIR DATA selector
R switch is at NORM.
(5) Make sure that the flaps are fully retracted (Ref. TASK 27-50-00-866-
009).
(6) On the FCU, set the CAPT (F/O) Baro-Correction to display STD below
the altitude scale on the CAPT (F/O) PFD .
Subtask 34-13-00-865-101
EFF :
401-499,
053-099, 215-215, 218-299, 306-399, 34-13-00
Page 579
Feb 01/09
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
Subtask 34-13-00-480-052
NOTE : For this test, use a ground pressure generator with these minimum
____
requirements:
- Static (altitude): -1000ft to 50,000ft (accuracy +/-0,1mb
(0.00145psi) in positive t⁰),
- Pitot (speed) : 0 to 500Kts,
- Mach Nbr : 0 to 1.000,
- Climb Rate : 0 to +/- 6000ft/mn (accuracy +/- 7%).
(1) Remove the slip on covers from the static probes and the pitot
probes.
R (2) Connect the GENERATOR - GROUND PRESSURE MINI. 100 MB to the static
and pitot probes of the aircraft:
NOTE : For the CAPT and F/O circuits, it is necessary to connect the
____
ground pressure generator to the two static probes (L and R).
For CAPT circuit (ADIRU 1) and F/O circuit (ADIRU 2), connect
the ground pressure generator to the static probes with the
ADAPTER COVER-STATIC PORT (98D34003500102):
- L static probe 1 7DA1, zone 127, STA 8750, for the L static
pressure ADM (19FP5)
- L static probe 2 7DA2, zone 127, STA 8700, for the L static
pressure ADM (19FP7)
and
- R static probe 1 8DA1, zone 128, STA 9300, for the R static
pressure ADM (19FP4)
- R static probe 2 8DA2, zone 128, STA 9350, for the R static
pressure ADM (19FP6)
For the standby circuit (ADIRU 3), connect the ground pressure
generator to the static probes with the ADAPTER COVER-STATIC
PORT (98D34003500100):
EFF :
401-499,
053-099, 215-215, 218-299, 306-399, 34-13-00
Page 580
Feb 01/09
TAI
- L static probe 3 7DA3, zone 121, STA 4250, for the static
pressure ADM (19FP8) or
- R static probe 3 8DA3, zone 122, STA 4250, for the static
pressure ADM (19FP8).
(3) Seal the drain holes of the pitot probes with a piece of plastic and
colored adhesive tape.
CAUTION : WHEN YOU SEAL THE DRAIN HOLE IN THE PITOT PROBE, DO NOT
_______
SEAL THE HOLE DIRECTLY WITH THE COLORED ADHESIVE TAPE.
ALWAYS PUT A PIECE OF PLASTIC ON THE HOLE FIRST AND USE THE
COLORED ADHESIVE TAPE TO ATTACH THE PLASTIC.
IF YOU SEAL THE DRAIN HOLE DIRECTLY WITH THE ADHESIVE TAPE,
THERE IS A RISK THAT SOME OF THE ADHESIVE WILL STAY ON THE
HOLE AND COLLECT PARTICLES. THIS CAN SUBSEQUENTLY CAUSE
BLOCKAGE OF THE HOLE AND THUS INCORRECT OPERATION OF THE
PROBE.
(a) Seal the opposite static probe of the standby ADM with the
ADAPTER COVER-STATIC PORT (98D34003500103).
(4) Move the vane of the three AOA sensors to the upper position. Keep
the AOA sensors in position with colored adhesive tape.
R
EFF :
401-499,
053-099, 215-215, 218-299, 306-399, 34-13-00
Page 581
Nov 01/08
TAI
4. Procedure
_________
Subtask 34-13-00-720-063-E
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On the ground pressure generator, On the CAPT and F/O PFDs, compare and
set a static pressure and a total write the altitude and airspeed values
pressure as given in the tables for the ADIRU 1 and 2.
below.
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
CAPT/3. write the altitude and airspeed values
for the ADIRU 3 (in relation to the
Trim 0) and the ADIRU 2.
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
F/O/3. write the altitude and airspeed values
for the ADIRU 3 (in relation to the
Trim 0) and the ADIRU 1.
- slowly balance the pressure in The rate of descent must not be more
the static and total pressure than 6000 ft/mn.
lines.
- open the lines to get the
atmospheric pressure.
R
EFF :
401-499,
053-099, 215-215, 218-299, 306-399, 34-13-00
Page 582
Nov 01/08
TAI
(1) ADIRUs 1 and 2
------------------------------------------------------------------------------
| | CAPT PFD and F/O PFD |
| Pressure generator | AIR DATA switch at | AIR DATA switch |
| | NORM | at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|---------------------|
| Ps | Pt | QC |Hp 1/2| Vc 1/2|Mach 1/2| |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) |(Kts) | | For ADIRU 3 to get |
| | | | |(hpa) | | +/- 2| | |
|-----|-----|-----|-----|------|------|-------|--------| the correct value: |
R | 5308|833.4| 1828|948.1|114.7 | 5000 | 250 |0.413(*)| |
| | | | | |+/-12 | |+/-0.004| - use the placard |
|-----|-----|-----|-----|------|------|-------|--------| |
R |10343|687.6| 6335|801.8|114.2 |10000 | 250 |0.452(*)| near the ADIRU3 and |
| | | | | |+/-15 | |+/-0.004| |
|-----|-----|-----|-----|------|------|-------|--------| refer to the tables |
R |20461|456.7|13009|619.2|162.5 |20000 | 300 | 0.651 | |
| | | | | |+/- 22| |+/-0.004| that follow. |
|-----|-----|-----|-----|------|------|-------|--------| |
R |30515|293.9|20581|454.4|160.5 |30000 | 300 | 0.790 | |
| | | | | |+/- 30| |+/-0.003| (in relation to the |
|-----|-----|-----|-----|------|------|-------|--------| |
R |40487|183.2|30618|292.5|109.3 |40000 | 250 | 0.823 | Trim 0ft) |
| | | | | |+/- 42| |+/-0.003| |
------------------------------------------------------------------------------
R
EFF :
215-215, 218-299, 34-13-00
Page 583
Nov 01/08
TAI
(2) ADIRU 3
--------------------------------------------------------
| | CAPT PFD and F/O PFD |
| Pressure generator | AIR DATA switch |
| | at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|
| Ps | Pt | QC | Hp 3 | Vc 3 | Mach 3 |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) |(Kts) | |
| | | | | (hpa)| | +/-2 | |
|-----|-----|-----|-----|------|------|------|---------|
R | 5308|833.4| 1828|948.1|114.6 | 5406 | 264 |0.439 (*)|
| | | | | |+/- 12| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
R |10343|687.6| 6335|801.8|114.2 | 10483| 264 |0.482 (*)|
| | | | | |+/- 15| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
R |20461|456.7|13009|619.2|162.5 | 21092| 319 | 0.706 |
| | | | | |+/- 22| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
R |30515|293.9|20581|454.4|160.5 | 31845| 322 | 0.873 |
| | | | | |+/- 30| |+/-0.003 |
|-----|-----|-----|-----|------|------|------|---------|
R |40487|183.2|30618|292.5|109.3 | 41761| 267 | 0.903 |
| | | | | |+/- 42| |+/-0.003 |
--------------------------------------------------------
R
EFF :
215-215, 218-299, 34-13-00
Page 584
Nov 01/08
TAI
(*) These indications are not shown when the Mach value is less
than 0.5.
Subtask 34-13-00-720-063-C
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On the ground pressure generator, On the CAPT and F/O PFDs, compare and
set a static pressure and a total write the altitude and airspeed values
pressure as given in the tables for the ADIRU 1 and 2.
below.
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
CAPT/3. write the altitude and airspeed values
for the ADIRU 3 (in relation to the
Trim 0ft) and the ADIRU 2.
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
F/O/3. write the altitude and airspeed values
for the ADIRU 3 (in relation to the
Trim 0ft) and the ADIRU 1.
- slowly balance the pressure in The rate of descent must not be more
the static and total pressure than 6000 ft/mn.
lines.
- open the lines to get the
atmospheric pressure.
R
EFF :
215-215, 218-299, 306-399, 34-13-00
Page 585
Nov 01/08
TAI
(1) ADIRUs 1 and 2
------------------------------------------------------------------------------
| | CAPT PFD and F/O PFD |
| Pressure generator | AIR DATA switch at | AIR DATA switch |
| | NORM |at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|---------------------|
| Ps | Pt | QC |Hp 1/2| Vc 1/2|Mach 1/2| |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) |(Kts) | | For ADIRU 3 to get |
| | | | | (hpa)| | +/- 2| | |
|-----|-----|-----|-----|------|------|-------|--------| the correct values: |
| 5257| 835 | 1827|948.1|113.1 |5000 | 250 |0.413(*)| |
| | | | | |+/-12 | |+/-0.004| - use the placard |
|-----|-----|-----|-----|------|------|-------|--------| |
|10253| 690 | 6335|801.8|111.8 |10000 | 250 |0.452(*)| near the ADIRU3 and |
| | | | | |+/-15 | |+/-0.004| |
|-----|-----|-----|-----|------|------|-------|--------| refer to the tables |
|20192|461.9|13009|619.2|157.3 |20000 | 300 | 0.651 | |
| | | | | |+/- 22| |+/-0.004| that follow. |
|-----|-----|-----|-----|------|------|-------|--------| |
|30058|300.1|20576|454.5|154.4 |30000 | 300 | 0.791 | |
| | | | | |+/- 30| |+/-0.003| (in relation to the |
|-----|-----|-----|-----|------|------|-------|--------| |
|40004|187.5|30620|292.5| 105 |39995 | 250 | 0.823 | Trim 0ft) |
| | | | | |+/- 42| |+/-0.003| |
------------------------------------------------------------------------------
R
EFF :
306-399, 34-13-00
Page 586
Nov 01/08
TAI
(2) ADIRU 3
--------------------------------------------------------
| | CAPT PFD and F/O PFD |
| Pressure generator | AIR DATA switch |
| | at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|
| Ps | Pt | QC | Hp 3 | Vc 3 | Mach 3 |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) |(Kts) | |
| | | | | (hpa)| | +/-2 | |
|-----|-----|-----|-----|------|------|------|---------|
| 5257| 835 | 1827|948.1|113.1 | 5305 | 261 |0.433 (*)|
| | | | | |+/- 12| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|10253| 690 | 6335|801.8|111.8 |10370 | 261 |0.475 (*)|
| | | | | |+/- 15| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|20192|461.9|13009|619.2|157.3 |20790 | 314 | 0.690 |
| | | | | |+/- 22| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|30058|300.1|20583|454.5|154.4 |31340 | 316 | 0.851 |
| | | | | |+/- 30| |+/-0.003 |
|-----|-----|-----|-----|------|------|------|---------|
|40004|187.5|30618|292.5| 105 |41320 | 263 | 0.883 |
| | | | | |+/- 42| |+/-0.003 |
--------------------------------------------------------
R
EFF :
306-399, 34-13-00
Page 587
Nov 01/08
TAI
(*) These indications are not shown when the Mach value is less
than 0.5.
Subtask 34-13-00-720-063-B
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On the ground pressure generator, On the CAPT and F/O PFDs, compare and
set a static pressure and a total write the altitude and airspeed values
pressure as given in the tables for the ADIRU 1 and 2.
below.
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
CAPT/3. write the altitude and airspeed values
for the ADIRU 3 (in relation to the
Trim 0) and the ADIRU 2.
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
F/O/3. write the altitude and airspeed values
for the ADIRU 3 (in relation to the
Trim 0) and the ADIRU 1.
- slowly balance the pressure in The rate of descent must not be more
the static and total pressure than 6000 ft/mn.
lines.
- open the lines to get the
atmospheric pressure.
R
EFF :
306-399, 401-499, 34-13-00
Page 588
Nov 01/08
TAI
(1) ADIRUs 1 and 2
------------------------------------------------------------------------------
| | CAPT PFD and F/O PFD |
| Pressure generator | AIR DATA switch at | AIR DATA switch |
| | NORM | at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|---------------------|
| Ps | Pt | QC |Hp 1/2| Vc 1/2|Mach 1/2| |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) | (Kts) | | For ADIRU 3 to get |
| | | | | (hpa)| | +/- 2 | | |
|-----|-----|-----|-----|------|------|-------|--------| the correct values: |
| 5392|830.8| 1828|948.1|117.3 | 5000 | 250 |0.412(*)| |
| | | | | |+/-12 | |+/-0.004| - use the placard |
|-----|-----|-----|-----|------|------|-------|--------| |
|10450|684.7| 6335|801.8|117.1 |10000 | 250 |0.452(*)| near the ADIRU3 and |
| | | | | |+/-15 | |+/-0.004| |
|-----|-----|-----|-----|------|------|-------|--------| refer to the tables |
|20822|449.8|13009|619.2|169.4 |20000 | 300 | 0.651 | |
| | | | | |+/- 22| |+/-0.004| that follow. |
|-----|-----|-----|-----|------|------|-------|--------| |
|31067|286,6|20579|454.4|167.8 |30000 | 300 | 0.790 | |
| | | | | |+/- 30| |+/-0.003| (in relation to the |
|-----|-----|-----|-----|------|------|-------|--------| |
|41086| 178 |30618|292.5|114.5 |40000 | 250 | 0.823 | Trim 0ft) |
| | | | | |+/- 42| |+/-0.003| |
------------------------------------------------------------------------------
R
EFF :
401-499, 34-13-00
Page 589
Nov 01/08
TAI
(2) ADIRU 3
--------------------------------------------------------
| Pressure | CAPT PFD and F/O PFD |
| generator | AIR DATA switch |
| | at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|
| Ps | Pt | QC | Hp 3 | Vc 3 | Mach 3 |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) |(Kts) | |
| | | | | (hpa)| | +/-2 | |
|-----|-----|-----|-----|------|------|------|---------|
| 5392|830.8| 1828|948.1|117.3 | 5445 | 265 |0.442 (*)|
| | | | | |+/- 12| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|10450|684.7| 6335|801.8|117.1 | 10565| 266 |0.487 (*)|
| | | | | |+/- 15| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|20822|449.8|13009|619.2|169.4 | 21535| 326 | 0.725 |
| | | | | |+/- 22| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|31067|286.6|20579|454.4|167.8 | 32455| 328 | 0.899 |
| | | | | |+/- 30| |+/-0.003 |
|-----|-----|-----|-----|------|------|------|---------|
|41086| 178 |30618|292.5|114.5 | 42430| 272 | 0.932 |
| | | | | |+/- 42| |+/-0.003 |
--------------------------------------------------------
R
EFF :
401-499, 34-13-00
Page 590
Nov 01/08
TAI
(*) These indications are not shown when the Mach value is less
than 0.5.
Subtask 34-13-00-720-063-D
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On the ground pressure generator, On the CAPT and F/O PFDs, compare and
set a static pressure and a total write the altitude and airspeed values
pressure as given in the tables for the ADIRU 1 and 2.
below.
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
CAPT/3. write the altitude and airspeed values
for the ADIRU 3 (in relation to the
applicable Trim) and the ADIRU 2.
- set the AIR DATA selector to On the CAPT and F/O PFDs, compare and
F/O/3. write the altitude and airspeed values
for the ADIRU 3 (in relation to the
applicable Trim) and the ADIRU 1.
- slowly balance the pressure in The rate of descent must not be more
the static and total pressure than 6000 ft/mn.
lines.
- open the lines to get the
atmospheric pressure.
R
EFF :
053-099, 401-499, 34-13-00
Page 591
Nov 01/08
TAI
(1) ADIRUs 1 and 2
------------------------------------------------------------------------------
| | CAPT PFD and F/O PFD |
| Pressure generator | AIR DATA switch at | AIR DATA switch |
| | NORM | at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|---------------------|
| Ps | Pt | QC |Hp 1/2| Vc 1/2|Mach 1/2| |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) |(Kts) | | For ADIRU 3 to get |
| | | | |(hpa) | | +/- 2| | |
|-----|-----|-----|-----|------|------|-------|--------| the correct value: |
| 5308|833.4| 1828|948.1|114.6 | 5000 | 250 |0.413(*)| |
| | | | | |+/-12 | |+/-0.004| - use the placard |
|-----|-----|-----|-----|------|------|-------|--------| |
R |10343|687.6| 6335|801.8|114.3 |10000 | 250 |0.452(*)|near the ADIRU 3 and |
| | | | | |+/-15 | |+/-0.004| |
|-----|-----|-----|-----|------|------|-------|--------| refer to the tables |
R |20498|456.7|13009|619.2|162.5 |20000 | 300 | 0.651 | |
| | | | | |+/- 22| |+/-0.004| that follow. |
|-----|-----|-----|-----|------|------|-------|--------| |
R |30515|293.9|20581|454.4|160.5 |30000 | 300 | 0.790 | |
| | | | | |+/- 30| |+/-0.003| (in relation to the |
|-----|-----|-----|-----|------|------|-------|--------| |
|40489|183.2|30618|292.5|109.3 |40000 | 250 | 0.823 | applicable Trim) |
| | | | | |+/- 42| |+/-0.003| |
------------------------------------------------------------------------------
R
EFF :
053-099, 34-13-00
Page 592
Nov 01/08
TAI
(2) ADIRU 3
--------------------------------------------------------
| | CAPT PFD and F/O PFD |
| Pressure generator | AIR DATA switch |
| | at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|
| Ps | Pt | QC | Hp 3 | Vc 3 | Mach 3 |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) |(Kts) | |
| | | | | (hpa)| | +/-2 | |
|-----|-----|-----|-----|------|------|------|---------|
| 5308|833.4| 1828| 948 |114.6 | 5405 | 264 |0.439 (*)|
| | | | | |+/- 12| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|10345|687.5| 6335|801.8|114.3 | 10485| 264 |0.482 (*)|
| | | | | |+/- 15| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|20498|456.0|13009|619.2|163.2 | 21291| 322 | 0.740 |
| | | | | |+/- 22| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|30515|293.9|20579|454.4|160.5 | 32125| 325 | 0.885 |
| | | | | |+/- 30| |+/-0.003 |
|-----|-----|-----|-----|------|------|------|---------|
|40489|183.2|30618|292.5|109.3 | 42040| 269 | 0.915 |
| | | | | |+/- 42| |+/-0.003 |
--------------------------------------------------------
R
EFF :
053-099, 34-13-00
Page 593
Nov 01/08
TAI
(b) Aircraft with Trim = +150ft
--------------------------------------------------------
| | CAPT PFD and F/O PFD |
| Pressure generator | AIR DATA switch |
| | at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|
| Ps | Pt | QC | Hp 3 | Vc 3 | Mach 3 |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) |(Kts) | |
| | | | | (hpa)| | +/-2 | |
|-----|-----|-----|-----|------|------|------|---------|
| 5308|833.4| 1828| 948 |114.6 | 5405 | 264 |0.439 (*)|
| | | | | |+/- 12| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|10345|687.5| 6335|801.8|114.3 | 10485| 264 |0.482 (*)|
| | | | | |+/- 15| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|20498|456.0|13009|619.2|163.2 | 21230| 321 | 0.711 |
| | | | | |+/- 22| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|30515|293.9|20579|454.4|160.5 | 32010| 324 | 0.881 |
| | | | | |+/- 30| |+/-0.003 |
|-----|-----|-----|-----|------|------|------|---------|
|40489|183.2|30618|292.5|109.3 | 41930| 268 | 0.911 |
| | | | | |+/- 42| |+/-0.003 |
--------------------------------------------------------
R
EFF :
053-099, 34-13-00
Page 594
Nov 01/08
TAI
(c) Aircraft with Trim = 0ft
--------------------------------------------------------
| | CAPT PFD and F/O PFD |
| Pressure generator | AIR DATA switch |
| | at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|
| Ps | Pt | QC | Hp 3 | Vc 3 | Mach 3 |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) |(Kts) | |
| | | | | (hpa)| | +/-2 | |
|-----|-----|-----|-----|------|------|------|---------|
R | 5308|833.4| 1828|948.1|114.7 | 5406 | 265 |0.439 (*)|
| | | | | |+/- 12| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
R |10342|687.6| 6335|801.8|114.2 | 10483| 264 |0.482 (*)|
| | | | | |+/- 15| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
R |20461|456.7|13009|619.2|162.5 | 21092| 319 | 0.706 |
| | | | | |+/- 22| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
R |30515|293.9|20581|454.4|160.5 | 31845| 322 | 0.873 |
| | | | | |+/- 30| |+/-0.003 |
|-----|-----|-----|-----|------|------|------|---------|
R |40487|183.2|30620|292.5|109.3 | 41761| 267 | 0.903 |
| | | | | |+/- 42| |+/-0.003 |
--------------------------------------------------------
R
EFF :
053-099, 34-13-00
Page 595
Nov 01/08
TAI
(d) Aircraft with Trim = -150ft
--------------------------------------------------------
| | CAPT PFD and F/O PFD |
| Pressure generator | AIR DATA switch |
| | at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|
| Ps | Pt | QC | Hp 3 | Vc 3 | Mach 3 |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) |(Kts) | |
| | | | | (hpa)| | +/-2 | |
|-----|-----|-----|-----|------|------|------|---------|
| 5308|833.4| 1828| 948 |114.6 | 5405 | 264 |0.439 (*)|
| | | | | |+/- 12| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|10345|687.5| 6335|801.8|114.3 | 10485| 265 |0.462 (*)|
| | | | | |+/- 15| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|20498|456.0|13009|619.2|163.2 | 21050| 318 | 0.702 |
| | | | | |+/- 22| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|30515|293.9|20579|454.4|160.5 | 31685| 320 | 0.866 |
| | | | | |+/- 30| |+/-0.003 |
|-----|-----|-----|-----|------|------|------|---------|
|40489|183.2|30618|292.5|109.3 | 41600| 265 | 0.896 |
| | | | | |+/- 42| |+/-0.003 |
--------------------------------------------------------
R
EFF :
053-099, 34-13-00
Page 596
Nov 01/08
TAI
(e) Aircraft with Trim = -250ft
--------------------------------------------------------
| | CAPT PFD and F/O PFD |
| Pressure generator | AIR DATA switch |
| | at CAPT/3 or F/O/3 |
|------------------------------|-----------------------|
| Ps | Pt | QC | Hp 3 | Vc 3 | Mach 3 |
| (ft)|(hpa)| (ft)|(hpa)|Pt-Ps | (ft) |(Kts) | |
| | | | | (hpa)| | +/-2 | |
|-----|-----|-----|-----|------|------|------|---------|
| 5308|833.4| 1828| 948 |114.6 | 5405 | 264 |0.439 (*)|
| | | | | |+/- 12| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|10345|687.5| 6335|801.8|114.3 | 10485| 265 |0.482 (*)|
| | | | | |+/- 15| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|20498|456.0|13009|619.2|163.2 | 21005| 317 | 0.7 |
| | | | | |+/- 22| |+/-0.004 |
|-----|-----|-----|-----|------|------|------|---------|
|30515|293.9|20579|454.4|160.5 | 31580| 319 | 0.862 |
| | | | | |+/- 30| |+/-0.003 |
|-----|-----|-----|-----|------|------|------|---------|
|40489|183.2|30618|292.5|109.3 | 41500| 264 | 0.892 |
| | | | | |+/- 42| |+/-0.003 |
--------------------------------------------------------
(*) These indications are not shown when the Mach value is less
than 0.5.
5. Close-up
________
Subtask 34-13-00-080-052
A. Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
Make sure that there is no remaining piece of plastic and/or adhesive
tape on the pitot probes and AOA sensors. Make sure the pitot drain holes
are operational and that the AOA sensors move freely.
R
EFF :
401-499,
053-099, 215-215, 218-299, 306-399, 34-13-00
Page 597
Nov 01/08
TAI
Subtask 34-13-00-865-102
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
Subtask 34-13-00-860-093
(2) Install the slip on covers on the static probes and on the pitot
probes.
(3) Make sure that the drain holes on the pitot probes are not blocked by
unwanted materials. (Ref. TASK 34-11-15-200-001)
R
EFF :
401-499,
053-099, 215-215, 218-299, 306-399, 34-13-00
Page 598
Nov 01/08
TAI
**ON A/C ALL
TASK 34-13-00-790-002
Leak Test of the Principal Static and Total Air Data System
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR INJURE PERSONS.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______
CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
AUTOMATIC MOVEMENT OF THE FLIGHT CONTROL SURFACES CAN BE DANGEROUS
AND/OR CAUSE DAMAGE.
CAUTION : OBEY THESE PRECAUTIONS WHEN YOU DO THE TEST TO PREVENT DAMAGE TO
_______
INSTRUMENTS:
- THE PRESSURES SET MUST NOT BE MORE THAN 1050 hPa (31 in Hg) OR LESS
THAN 115 hPa (3.39 in Hg)
- CHANGES IN STATIC PRESSURE MUST NOT BE MORE THAN 6000 FEET/MINUTE
- DO NOT SUDDENLY OPEN LINES TO AMBIENT AIR WHILE THE PRESSURE
GENERATOR IS CONNECTED.
CAUTION : THE TOTAL PRESSURE IN THE PITOT SYSTEM MUST NEVER BE LESS THAN THE
_______
STATIC PRESSURE. THE DIFFERENCE BETWEEN THE PITOT AND THE STATIC
PRESSURE CIRCUITS MUST NEVER BE MORE THAN 368 hPa (10.86 in Hg).
1. __________________
Reason for the Job
To make sure that there are no leaks in the Captain and the First Officer
pitot and static circuits.
EFF :
ALL 34-13-00
Page 599
Nov 01/08
R
TAI
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-13-00-860-074
Subtask 34-13-00-865-061
EFF :
ALL 34-13-00
Page A500
Feb 01/09
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
Subtask 34-13-00-480-051
(1) Remove the slip on covers from the static probes and the pitot probes
of the main system.
R (2) Connect the static port of the GENERATOR - GROUND PRESSURE MINI. 100
R MB to the static probes with the ADAPTER COVER-STATIC PORT
(98D34003500102).
For CAPT circuit (ADIRU 1) and F/O circuit (ADIRU 2):
- L static probe 1 7DA1, zone 127, STA 8750, for the LH static
pressure ADM (19FP5)
- L static probe 2 7DA2, zone 127, STA 8700, for the LH static
pressure ADM (19FP7)
and
- R static probe 1 8DA1, zone 128, STA 9300, for the RH static
pressure ADM (19FP4)
- R static probe 2 8DA2, zone 128, STA 9350, for the RH static
pressure ADM (19FP6).
(3) Connect the ground pressure generator to the pitot probe with the
ADAPTOR-CHARGING,PITOT PROBE.
For CAPT circuit:
- pitot probe 1 9DA1, zone 125
For F/O circuit:
- pitot probe 2 9DA2, zone 126.
EFF :
ALL 34-13-00
Page A501
Feb 01/09
TAI
(4) Seal the drain holes:
CAUTION : WHEN YOU SEAL THE DRAIN HOLE IN THE PITOT PROBE, DO NOT
_______
SEAL THE HOLE DIRECTLY WITH THE COLORED ADHESIVE TAPE.
ALWAYS PUT A PIECE OF PLASTIC ON THE HOLE FIRST AND USE THE
COLORED ADHESIVE TAPE TO ATTACH THE PLASTIC.
IF YOU SEAL THE DRAIN HOLE DIRECTLY WITH THE ADHESIVE TAPE,
THERE IS A RISK THAT SOME OF THE ADHESIVE WILL STAY ON THE
HOLE AND COLLECT PARTICLES. THIS CAN SUBSEQUENTLY CAUSE
BLOCKAGE OF THE HOLE AND THUS INCORRECT OPERATION OF THE
PROBE.
Seal the drain holes of the pitot probes with a piece of plastic
and/or colored adhesive tape of very bright color.
(5) Move the vane of the AOA sensors 1 and 2 to the upper position.
Maintain the vane in position with colored adhesive tape.
Subtask 34-13-00-480-051-A
(1) Remove the slip on covers from the static probes and the pitot probes
of the main system.
R (2) Connect the static port of the GENERATOR - GROUND PRESSURE MINI. 100
R MB to the static probes with the ADAPTER COVER-STATIC PORT
(98D34003500102).
For CAPT circuit (ADIRU 1) and F/O circuit (ADIRU 2):
- L static probe 1 7DA1, zone 127, STA 8750, for the LH static
pressure ADM (19FP5)
- L static probe 2 7DA2, zone 127, STA 8700, for the LH static
pressure ADM (19FP7)
and
- R static probe 1 8DA1, zone 128, STA 9300, for the RH static
pressure ADM (19FP4)
- R static probe 2 8DA2, zone 128, STA 9350, for the RH static
pressure ADM (19FP6).
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-13-00
Page A502
Feb 01/09
TAI
(3) Connect the ground pressure generator to the pitot probe with the
ADAPTOR-CHARGING,PITOT PROBE.
For CAPT circuit:
- pitot probe 1 9DA1, zone 125
For F/O circuit:
- pitot probe 2 9DA2, zone 126.
(4) Move the vane of the AOA sensors 1 and 2 to the upper position.
Maintain the vane in position with colored adhesive tape.
Subtask 34-13-00-860-076
(2) Make sure that the flaps are in the fully retracted position
(Ref. TASK 27-50-00-866-009).
(3) On the ADIRS CDU ,set the OFF/NAV/ATT selector switches to NAV.
R Subtask 34-13-00-860-076-A
R (2) Make sure that the flaps are in the fully retracted position
R (Ref. TASK 27-50-00-866-009).
R (3) On the ADIRS MSU ,set the OFF/NAV/ATT selector switches to NAV.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-13-00
Page A503
Nov 01/08
TAI
R **ON A/C ALL
4. Procedure
_________
Subtask 34-13-00-790-050
NOTE : You can do the test below for a static pressure of 691.4 hPa and
____
an impact pressure of 59 hPa (or a total pressure of 750.4 hPa)
but it is less accurate.
Make sure that:
- the CAPT (or F/O) PFD shows the altitude value 10,000ft +/-30ft
and the airspeed value 180kts +/-3kts.
After 5 min:
- the change of altitude must not be more than 275 ft.
- the change of speed must not be more than 10 Kts.
NOTE : The difference between the input parameters for the ground test
____
(speed and altitude) and the values shown on the cockpit displays,
is normal.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R
EFF :
ALL 34-13-00
Page A504
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
After 5 minutes, on the CAPT (or F/O)
PFD:
- make sure that the change of altitude
is not more than 320 ft.
After 10 minutes, on the CAPT (or
F/O) PFD:
- make sure that the change of speed is
not more than 10 Kts.
Subtask 34-13-00-790-050-B
NOTE : You can do the test below for a static pressure of 691 hPa and an
____
impact pressure of 59.3 hPa (or a total pressure of 750.3 hPa) but
it is less accurate.
Make sure that:
- the CAPT (or F/O) PFD shows the altitude value 10,000ft +/-30ft
and the airspeed value 180kts +/-3kts.
After 5 min:
- the change of altitude must not be more than 275 ft.
- the change of speed must not be more than 10 Kts.
NOTE : The difference between the input parameters for the ground test
____
(speed and altitude) and the values shown on the cockpit displays,
is normal.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399,
34-13-00
Page A505
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R
EFF :
301-399, 34-13-00
Page A506
Nov 01/08
TAI
**ON A/C 401-499,
Subtask 34-13-00-790-050-A
NOTE : You can do the test below for a static pressure of 690 hPa and an
____
impact pressure of 60.4 hPa (or a total pressure of 750.4 hPa) but
it is less accurate.
Make sure that:
the CAPT (or F/O) PFD shows the altitude value 10,000ft +/- 30 ft
and the airspeed value 180kts +/-3 kts.
After 5 min:
- the change of altitude must not be more than 275 ft.
- the change of speed must not be more than 10 Kts.
NOTE : The difference between the input parameters for the ground test
____
(speed and altitude) and the values shown on the cockpit displays,
is normal.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
EFF :
401-499, 34-13-00
Page A507
Feb 01/09
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
After 10 minutes, on the CAPT (or
F/O) PFD:
- make sure that the change of speed is
not more than 10 Kts.
5. Close-up
________
Subtask 34-13-00-080-051
(1) Remove the adapters from the static probes and the pitot probes.
(2) Remove the piece of plastic and the colored adhesive tape from the
drain holes of the pitot probe.
(3) Remove the adhesive tape from the vane of the AOA.
(4) Install the slip on covers on the static probes and the pitot probes.
R
EFF :
ALL 34-13-00
Page A508
Nov 01/08
TAI
R **ON A/C 001-050, 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
Subtask 34-13-00-080-051-A
(1) Remove the adapters from the static probes and the pitot probes.
(2) Remove the adhesive tape from the vane of the AOA.
(3) Install the slip on covers on the static probes and the pitot probes.
Subtask 34-13-00-865-062
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
Subtask 34-13-00-860-075
(4) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF :
ALL 34-13-00
Page A509
Nov 01/08
TAI
(5) Make sure that the drain holes on the pitot probes are not blocked by
unwanted materials. (Ref. TASK 34-11-15-200-001)
R
EFF :
ALL 34-13-00
Page A510
Nov 01/08
TAI
TASK 34-13-00-740-002
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R
EFF :
ALL 34-13-00
Page A511
Nov 01/08
TAI
3. __________
Job Set-up
Subtask 34-13-00-860-077
(2) On the center pedestal, on the MCDU, get the SYSTEM REPORT/TEST/NAV
page
(Ref. TASK 31-32-00-860-010).
(5) On the center pedestal, on the ECAM control panel, push the STS key.
(6) On the glareshield 13VU, on the CAPT and F/O EFIS control sections of
the FCU, set the mode selector switch to ROSE/NAV.
(7) Put the safety barriers in position around the RAT area.
NOTE : This test is for the system 1. For the systems 2 and 3, use
____
the indications between parentheses.
EFF :
ALL 34-13-00
Page A512
Nov 01/08
TAI
R **ON A/C 405-499,
R Subtask 34-13-00-860-077-A
R (2) On the center pedestal, on the MCDU, get the SYSTEM REPORT/TEST/NAV
R page
R (Ref. TASK 31-32-00-860-010).
R (5) On the center pedestal, on the ECAM control panel, push the STS key.
R (6) On the glareshield 13VU, on the CAPT and F/O EFIS control sections of
R the FCU, set the mode selector switch to ROSE/NAV.
R (7) Put the safety barriers in position around the RAT area.
R NOTE : This test is for the system 1. For the systems 2 and 3, use
____
R the indications between parentheses.
Subtask 34-13-00-010-055
B. Get Access
(1) Put the access platform in position at the access door 822.
EFF :
ALL 34-13-00
Page A513
Nov 01/08
TAI
Subtask 34-13-00-865-089
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FCU/1 9CA1 B05
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-13-00
Page A514
Nov 01/08
TAI
**ON A/C ALL
Subtask 34-13-00-865-091
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
4. Procedure
_________
Subtask 34-13-00-740-050
NOTE : - Ignore the warnings and indications (VLE, ...) which are not
____
related to this interface test.
- When you test the ADR3, set the AIR DATA selector switch 15FP,
on the SWITCHING panel 8VU, to CAPT/3.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR1, ADR2 and ADR3 The OFF legend of the three pushbutton
pushbutton switches switches comes on.
- push the ADR1 (ADR2) (ADR3), On the ADIRS CDU, the OFF legend of the
only if the AIR DATA selector ADR pushbutton switch goes off.
switch is at CAPT/3 or F/O/3) On the CAPT (F/O) PFD, the SPD and ALT
pushbutton switch again. flags go out view. The speed and
altitude indications (30 Kts and local
altitude) are shown.
EFF :
ALL 34-13-00
Page A515
Nov 01/08
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- On the lower ECAM display unit, the
local temperature values SAT and TAT
are shown (only with ADR2 set).
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) 1/2 page
the ADR1 (ADR2) (ADR3) comes into view.
indication
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3)
the INTERFACE TEST indication INTERFACE TEST page comes into view.
R
EFF :
001-050, 053-099, 34-13-00
Page A516
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
VMO/MMO 350/.82
3. On the ADIRS CDU, push the ADR2 On the ADIRS CDU, the OFF legend of the
pushbutton switch. ADR2 pushbutton switch goes off.
- push the ADR3 pushbutton switch On the ADIRS CDU, the OFF legend of the
ADR3 pushbutton switch goes off
- push the ADR1 pushbutton On the ADIRS CDU, the OFF legend of the
switch. ADR1 pushbutton switch comes on
On the CAPT PFD, the speed and altitude
indications go out of view.
6. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications from the ADR3 are shown.
switch to CAPT/3.
8. On the ADIRS CDU, push the ADR1 On the ADIRS CDU, the OFF legend of the
pushbutton switch. ADR1 pushbutton switch goes off.
9. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications stay in view.
switch to NORM.
R
EFF :
001-050, 053-099, 34-13-00
Page A517
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
10. On the ADIRS CDU, set the three
OFF/NAV/ATT selector switches to
OFF.
Subtask 34-13-00-740-050-A
NOTE : - Ignore the warnings and indications (VLE, ...) which are not
____
related to this interface test.
- When you test the ADR3, set the AIR DATA selector switch 15FP,
on the SWITCHING panel 8VU, to CAPT/3.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR1, ADR2 and ADR3 The OFF legend of the ADR1, ADR2 and
pushbutton switches ADR3 pushbutton switches comes on.
- push the ADR1 (ADR2) (ADR3), On the ADIRS CDU, the OFF legend of the
only if the AIR DATA selector ADR pushbutton switch goes off
switch is to CAPT/3 or F/O/3) On the CAPT (F/O) PFD, the SPD and ALT
pushbutton switch again. flags go out of view. The speed and
altitude indications (30 Kts and local
altitude) are shown
On the lower ECAM display unit, the
local temperature values SAT and TAT
are shown (only with ADR2 set).
2. On the MCDU:
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-227, 301-308,
34-13-00
Page A518
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) page comes
the ADR1 (ADR2) (ADR3) into view.
indication
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) OUTPUT TESTS
the OUTPUT TESTS indication. page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) INTERFACE TEST
the INTERFACE TEST indication 1/2 page comes into view.
- on the keyboard push the NEXT - the ADR1 (ADR2) (ADR3) INTERFACE TEST
PAGE function key. 2/2 page comes into view.
R
EFF :
301-308,
201-203, 211-212, 215-215, 218-227, 34-13-00
Page A519
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
VMO/MMO 350/.82
3. On the ADIRS CDU, push the ADR2 On the ADIRS CDU, the OFF legend of the
pushbutton switch. ADR2 pushbutton switch goes off
- push the ADR3 pushbutton switch On the ADIRS CDU, the OFF legend of the
ADR3 pushbutton switch goes off
- push the ADR1 pushbutton On the ADIRS CDU, the OFF legend of the
switch. ADR1 pushbutton switch comes on
On the CAPT PFD, the speed and altitude
indications go out of view.
6. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications from the ADR3 are shown.
switch to CAPT/3.
8. On the ADIRS CDU, push the ADR1 On the ADIRS CDU, the OFF legend of the
pushbutton switch. ADR1 pushbutton switch goes off
9. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications stay in view.
switch to NORM.
R
EFF :
301-308,
201-203, 211-212, 215-215, 218-227, 34-13-00
Page A520
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
10. On the ADIRS CDU, set the three
OFF/NAV/ATT selector switches to
OFF.
Subtask 34-13-00-740-050-B
NOTE : - Ignore the warnings and indications (VLE, ...) which are not
____
related to this interface test.
- When you test the ADR3, set the AIR DATA selector switch 15FP,
on the SWITCHING panel 8VU, to CAPT/3.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR1, ADR2 and ADR3 The OFF legend of the ADR1, ADR2 and
pushbutton switches ADR3 pushbutton switches comes on.
- push the ADR1 (ADR2) (ADR3), On the ADIRS CDU, the OFF legend of the
only if the AIR DATA selector related ADR pushbutton switch goes off
switch is to CAPT/3 or F/O/3) On the CAPT (F/O) PFD, the SPD and ALT
pushbutton switch again. flags go out of view. The speed and
altitude indications (30 Kts and local
altitude) are shown
On the lower ECAM display unit, the
local temperature values SAT and TAT
are shown (only with ADR1 and/or ADR3
is set).
2. On the MCDU:
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-13-00
Page A521
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) page comes
the ADR1 (ADR2) (ADR3) into view.
indication
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) OUTPUT TESTS
the OUTPUT TESTS indication. page comes into view.
- push the line key adjacent to - the ADR1 (ADR2) (ADR3) INTERFACE TEST
the INTERFACE TEST indication 1/2 page comes into view.
- on the keyboard push the NEXT - the ADR1 (ADR2) (ADR3) INTERFACE TEST
PAGE function key. 2/2 page comes into view.
R
EFF :
228-299, 309-399, 401-404, 34-13-00
Page A522
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
OVERSPEED
VMO/MMO 350/.82
3. On the ADIRS CDU, push the ADR2 On the ADIRS CDU, the OFF legend of the
pushbutton switch. ADR2 pushbutton switch goes off
- push the ADR3 pushbutton switch On the ADIRS CDU, the OFF legend of the
ADR3 pushbutton switch goes off
- push the ADR1 pushbutton On the ADIRS CDU, the OFF legend of the
switch. ADR1 pushbutton switch comes on
On the CAPT PFD, the speed and altitude
indications go out of view.
6. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications from the ADR3 are shown.
switch to CAPT/3.
8. On the ADIRS CDU, push the ADR1 On the ADIRS CDU, the OFF legend of the
pushbutton switch. ADR1 pushbutton switch goes off
R
EFF :
228-299, 309-399, 401-404, 34-13-00
Page A523
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
9. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
- set the AIR DATA selector indications stay in view.
switch to NORM.
R Subtask 34-13-00-740-050-C
R NOTE : - Ignore the warnings and indications (VLE, ...) which are not
____
R related to this interface test.
R - When you test the ADR3, set the AIR DATA selector switch 15FP,
R on the SWITCHING panel 8VU, to CAPT/3.
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Push the ADR1, ADR2 and ADR3 The OFF legend of the three pushbutton
R pushbutton switches. switches comes on.
R - Push the ADR1 (ADR2) (ADR3, On the ADIRS MSU, the OFF legend of the
R only if the AIR DATA selector ADR pushbutton switch goes off.
R switch is at CAPT/3 or F/O/3) On the CAPT (F/O) PFD, the SPD and ALT
R pushbutton switch again. flags go out view. The speed and
R altitude indications (30 Kts and local
R altitude) are shown.
R - On the lower ECAM display unit, the
R local temperature values SAT and TAT
R
EFF :
228-299, 309-399, 401-499, 34-13-00
Page A524
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R are shown (only with ADR1 and/or ADR3
R is set).
R - Push the line key adjacent to - The ADIRS ADR1 (ADR2) (ADR3) 1/2 page
R the ADR1 (ADR2) (ADR3) comes into view.
R indication.
R - Push the line key adjacent to - The ADIRS ADR1 (ADR2) (ADR3)
R the INTERFACE TEST indication. INTERFACE TEST page comes into view.
R
EFF :
405-499, 34-13-00
Page A525
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R OVERSPEED
R VMO/MMO 350/.82
R 3. On the ADIRS MSU, push the ADR2 On the ADIRS MSU, the OFF legend of the
R pushbutton switch. ADR2 pushbutton switch goes off.
R - Push the ADR3 pushbutton On the ADIRS MSU, the OFF legend of the
R switch. ADR3 pushbutton switch goes off.
R - Push the ADR1 pushbutton On the ADIRS MSU, the OFF legend of the
R switch. ADR1 pushbutton switch comes on.
R On the CAPT PFD, the speed and altitude
R indications go out of view.
R 6. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
R - Set the AIR DATA selector indications from the ADR3 are shown.
R switch to CAPT/3.
R 8. On the ADIRS MSU, push the ADR1 On the ADIRS MSU, the OFF legend of the
R pushbutton switch. ADR1 pushbutton switch goes off.
R
EFF :
405-499, 34-13-00
Page A526
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R 9. On the SWITCHING panel 8VU: On the CAPT PFD, the speed and altitude
R - Set the AIR DATA selector indications stay in view.
R switch to NORM.
5. Close-up
________
Subtask 34-13-00-860-078
(1) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
(3) On the FLT CTL panels 23VU and 24VU, push the FAC, ELAC and SEC
pushbutton switches. The related OFF legend goes off.
Subtask 34-13-00-410-055
B. Close Access
(1) Install the protective cover on the battery power center 105VU.
R
EFF :
ALL 34-13-00
Page A527
Nov 01/08
TAI
Subtask 34-13-00-865-092
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
7XE, 5CC1, 5CC2
EFF :
ALL 34-13-00
Page A528
Nov 01/08
TAI
TASK 34-13-00-740-003
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-13-00-860-079
EFF :
ALL 34-13-00
Page A529
Nov 01/08
TAI
(3) On the center pedestal, on the MCDU, get the SYSTEM REPORT/TEST/NAV
page (Ref. TASK 31-32-00-860-010).
(4) On the overhead panel, on the ADIRS CDU, make sure that the OFF
legend of the ADR pushbutton switches is off).
Subtask 34-13-00-010-056
B. Get Access
(1) Put the access platformin position at the access door 822.
Subtask 34-13-00-865-093
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FCU/1 9CA1 B05
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-13-00
Page A530
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU HYDRAULIC/LGCIU/SYS2 2GA Q35
121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34
4. Procedure
_________
Subtask 34-13-00-740-051
NOTE : - The actions and the results of this procedure occur on the MCDU
____
used.
- It is not necessary to do an IR alignment procedure before you
start the ADR SYSTEM TEST.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. Push the line key adjacent to the The ADR 1(ADR 2)(ADR 3) page comes into
ADR 1(ADR 2)(ADR 3) indication view.
2. Push the line key adjacent to the The SYSTEM TEST page comes into view.
SYSTEM TEST indication
3. Push the line key adjacent to the The TEST IN PROGRESS indication comes
START TEST indication into view.
EFF :
ALL 34-13-00
Page A531
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
At the end of the test, the TEST OK
indication comes into view.
4. Push the line key adjacent to the These indications come into view:
TEST CLOSE UP indication - TEST CLOSE UP . IR RE-ALIGNMENT
- ENTER PPOS WITH AN UNUSED MCDU
(Refer to the NOTE given above)
5. Push the line key adjacent to the The test procedure stops.
RETURN indication
Subtask 34-13-00-740-051-A
NOTE : - The actions and the results of this procedure occur on the MCDU
____
used.
- It is not necessary to do an IR alignment procedure before you
start the ADR SYSTEM TEST.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. Push the line key adjacent to the The ADR 1(ADR 2)(ADR 3) page comes into
ADR 1(ADR 2)(ADR 3) indication view.
2. Push the line key adjacent to the The TEST IN PROGRESS indication comes
SYSTEM TEST indication into view.
At the end of the test, the TEST OK
indication comes into view.
3. Push the line key adjacent to the The test procedure stops.
RETURN indication
EFF :
ALL 34-13-00
Page A532
Nov 01/08
TAI
**ON A/C ALL
5. Close-up
________
Subtask 34-13-00-860-080
(1) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
Subtask 34-13-00-410-056
B. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-13-00
Page A533
Nov 01/08
TAI
**ON A/C 001-050, 053-099,
TASK 34-13-00-740-004
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
001-050, 053-099, 34-13-00
Page A534
Nov 01/08
TAI
3. __________
Job Set-up
Subtask 34-13-00-860-083
(2) Do the ADIRS start procedure (ADIRU related to the installed ADM
only) (Ref. TASK 34-10-00-860-002).
Subtask 34-13-00-010-061
B. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-13-00-865-094
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FCU/1 9CA1 B05
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
121VU AUTO FLT/FCU/2 9CA2 M21
121VU ADIRS/ADIRU/2PWR/SHED 10FP N11
121VU ADIRS/ADIRU/3PWR/SWTG 9FP N10
121VU ADIRS/ADIRU/2/26VAC AND AOA 5FP2 N09
121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N08
121VU ADIRS/ADIRU/2/115VAC 4FP2 N07
121VU ADIRS/ADIRU/3/115VAC 4FP3 N06
121VU ADIRS/ADIRU/2/28VDC 6FP2 N05
121VU ADIRS/ADIRU/3/28VDC 6FP3 N04
121VU HYDRAULIC/LGCIU/SYS2 2GA Q35
121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34
EFF :
001-050, 053-099, 34-13-00
Page A535
Nov 01/08
TAI
Subtask 34-13-00-865-095
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
4. Procedure
_________
Subtask 34-13-00-740-052
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADIRS ADR1 (ADR2) (ADR3) 1/2 page
the ADR1 (ADR2) (ADR3) comes into view.
indication (related to the
removed ADM)
- push the line key adjacent to - the CURRENT STATUS page comes into
the CURRENT STATUS indication. view.
EFF :
001-050, 053-099, 34-13-00
Page A536
Nov 01/08
TAI
5. Close-up
________
Subtask 34-13-00-410-061
A. Close Access
(1) Install the protective cover on the battery power center 105VU.
Subtask 34-13-00-860-084
(1) On the center pedestal, on the MCDU, push the line key adjacent to
the RETURN indication until the MCDU MENU page comes into view.
Subtask 34-13-00-865-096
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5CC1, 5CC2, 7XE
EFF :
001-050, 053-099, 34-13-00
Page A537
Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
TASK 34-13-00-740-005
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page A538
Nov 01/08
TAI
3. __________
Job Set-up
Subtask 34-13-00-860-085
(2) Do the ADIRS start procedure (ADIRU related to the installed ADM
only) (Ref. TASK 34-10-00-860-002).
(3) On the center pedestal, on one MCDU, get the SYSTEM REPORT/TEST/NAV
page (Ref. TASK 31-32-00-860-010).
Subtask 34-13-00-010-062
B. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-13-00-865-097
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FCU/1 9CA1 B05
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
121VU AUTO FLT/FCU/2 9CA2 M21
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page A539
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N08
121VU ADIRS/ADIRU/2/115VAC 4FP2 N07
121VU ADIRS/ADIRU/3/115VAC 4FP3 N06
121VU ADIRS/ADIRU/2/28VDC 6FP2 N05
121VU ADIRS/ADIRU/3/28VDC 6FP3 N04
Subtask 34-13-00-865-098
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page A540
Nov 01/08
TAI
4. Procedure
_________
Subtask 34-13-00-740-053
NOTE : This test is for the system 1. For the systems 2 and 3, use the
____
indications between the parentheses.
The actions and the results of this procedure occur on the MCDU
used.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. Push the line key adjacent to the - the ADR 1(ADR 2)(ADR 3) page comes
ADR 1(ADR 2)(ADR 3) indication. into view.
2. Push the line key adjacent to the - the INPUT STATUS page 1/8 comes into
INPUT STATUS indication. view with the current on-the-ground
status of the ADR1 (ADR2) (ADR3)
parameters.
3. Push the down arrow function key - the related pages come into view.
to set the INPUT STATUS page 2/8
to 8/8.
4. Push the line key adjacent to the - the test procedure stops.
RETURN indication.
5. Close-up
________
Subtask 34-13-00-410-062
A. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page A541
Nov 01/08
TAI
Subtask 34-13-00-860-086
(1) On the center pedestal, on the MCDU, push the line key adjacent to
the RETURN indication until the MCDU MENU page comes into view.
Subtask 34-13-00-865-099
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5CC1, 5CC2, 7XE
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-13-00
Page A542
Nov 01/08
TAI
AIR DATA - INSPECTION/CHECK
___________________________
TASK 34-13-00-200-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-13-00
Page 601
Nov 01/06
TAI
3. __________
Job Set-up
Subtask 34-13-00-860-094
A. Get Access
(1) Put the ACCESS PLATFORM 2M (6 FT) in position in zone 125 to get
access to the pitot probes 1 and 3 and in zone 126 to get access to
the pitot probe 2.
(3) Put the ACCESS PLATFORM 2M (6 FT) in position in zone 128 to get
acces to the static probes 7DA1, 7DA2, 8DA1 and 8DA2.
(5) Put the ACCESS PLATFORM 2M (6 FT) in zone 120 to get acces to the
static probes 7DA3 and 8DA3.
(7) Put an ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position in zone 231
to get acces to the AOA sensor 3FP1 (232 for 3FP2) (127 for 3FP3).
4. Procedure
_________
Subtask 34-13-00-220-050
(a) Color
During the ageing of the probe, the color of the tube becomes
brownish and/or blackish.
This coloration has no effect on the operation of the probe.
(b) Make sure that the drain holes are not blocked.
- If a drain hole is blocked, do the flushing (Ref. TASK 34-10-
00-170-001) of the main system, or (Ref. TASK 34-10-00-170-003)
for the standby system.
EFF :
ALL 34-13-00
Page 602
May 01/06
R
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-222, 301-304,
Subtask 34-13-00-220-051
Subtask 34-13-00-220-051-A
Subtask 34-13-00-220-052
(a) Make sure that there is no paint on the vane and on the mounting
base of the three AOA sensors.
- if not, do the (Ref. TASK 34-11-19-200-001).
EFF :
ALL 34-13-00
Page 603
Nov 01/08
TAI
(2) Manually turn the vane of the AOA sensors very carefully from the
maximum to the minimum mechanical stops (+85⁰ to -35⁰) and make sure
that there is no hard point.
(a) if one vane has a hard point, replace the related AOA sensor
(Ref. TASK 34-11-19-000-001) and (Ref. TASK 34-11-19-400-001)
5. Close-up
________
Subtask 34-13-00-860-095
(4) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-13-00
Page 604
Nov 01/03
TAI
ATTITUDE, HEADING AND POSITION - DESCRIPTION AND OPERATION
__________________________________________________________
1. _______
General
The Inertial Reference (IR) portion of the Air Data/Inertial Reference Unit
(ADIRU) provides main data sources which are precision attitude, magnetic
heading references and navigation data to the aircraft avionics systems.
Attitude, heading and navigation data are displayed on the Electronic Flight
Instrument System (EFIS) displays (Primary Flight Display (PFD); Navigation
R Display (ND)) and on the DDRMI which recopies the heading data.
2. __________________
System Description
A. General
The IR portion is a strapdown inertial system which provides a quality
reference for attitude, heading (true and magnetic), angular rates and
accelerations.
The IR software also computes:
- the inertial position
- the ground velocities
- the baro inertial vertical speed
- the drift angle
- the wind data
- the flight path data.
B. Inputs
EFF :
001-050, 053-099, 34-14-00
Page 1
Config-1 Feb 01/06
TAI
(c) ADR inputs
The IR portion is provided with three ARINC 429 low speed buses
from the other tow ADIRUs (ADR portion) and from its associated
ADR. These buses transmit the following data words:
- label 203: ALTITUDE
- label 210: TRUE AIRSPEED.
---------------------------------------------------------------------
| INPUT SIGNAL | INPUT | INPUT |
| | | DEFINITION |
---------------------------------------------------------------------
| Mounting position 1 | Open/GND | see table 2 |
| Mounting position 2 | Open/GND | see table 2 |
| SDI MSB (Middle insert) | Open/GND | 0/1 |
| SDI LSB (Middle insert) | Open/GND | 0/1 |
| CDU ON/OFF | Open/GND |Not displayed/displayed|
| IR mode select M1 | Open/GND | see table 3 |
| IR mode select M2 | Open/GND | see table 3 |
| Auto ADR.DADS select | Open/GND | see table 4 |
| Manual ADR.DADS select | Open/GND | see table 4 |
| Aircraft Ident Code 1/0 | Open/GND | 0/1 |
| Aircraft Ident Code 2/0 | Open/GND | 0/1 |
| Aircraft Ident Code 4/0 | Open/GND | 0/1 |
| Aircraft Ident Code 8/0 | Open/GND | 0/1 |
| Aircraft Ident Code 16/0 | Open/GND | 0/1 |
| Aircraft Ident Code Parity | Open/GND | 0/1 |
R
EFF :
001-050, 053-099, 34-14-00
Page 2
Config-1 Nov 01/00
TAI
---------------------------------------------------------------------
| INPUT SIGNAL | INPUT | INPUT |
| | | DEFINITION |
---------------------------------------------------------------------
| IR remote test | Open/GND | No test/test |
---------------------------------------------------------------------
Table 1 : IR Discrete Inputs
---------------------------------------------------------------
| Mounting | Mounting | Connector Position/Aircraft |
| Position 1 | Position 2 | |
---------------------------------------------------------------
| Open * | Open * | FWD * |
| Ground | Open | AFT |
| Open | Ground | RIGHT |
| Ground | Ground | LEFT |
---------------------------------------------------------------
Table 2 : Mounting Position Discretes
----------------------------------------------
| M1 | M2 | OFF/NAV/ATT |
| | | Selector Switch Position |
|--------------------------------------------|
| Open | Open | OFF |
| Ground | Open | NAV |
| Open | Ground | ATT |
----------------------------------------------
Table 3 : IR Mode Select
R
EFF :
001-050, 053-099, 34-14-00
Page 3
Config-1 Nov 01/00
TAI
--------------------------------------------------------------------
| Auto | Manual | IR Selection |
| ADR DADS | ADR DADS | |
--------------------------------------------------------------------
| Open | Open | The IR uses the air data received |
| | | on port 1 |
|-------------|----------------|-----------------------------------|
| Open | Ground | The IR uses the air data received |
| | | on port 2 |
|-------------|----------------|-----------------------------------|
| Ground * | Open * | The IR goes automatically from one|
| | | air data source to the others |
| | | according to their validity and |
| | | priority. * |
--------------------------------------------------------------------
Table 4 : ADR DADS Select
--------------------------------------------
| SDI-MSB | SDI-LSB | ADIRU NUMBER |
--------------------------------------------
| OPEN | GROUND | 1 |
| GROUND | OPEN | 2 |
| GROUND | GROUND | 3 |
--------------------------------------------
Table 5 : IR SDI Code
R
EFF :
001-050, 053-099, 34-14-00
Page 4
Config-1 Nov 01/00
TAI
When this discrete is grounded, the test is activated.
In normal operation this discrete is open (unused), but can be
also activated via the CFDIU (on ground).
C. Software Computation
(Ref. Fig. 001, 002)
The software contains the program memory and provides the following basic
functions:
- real-time executive
- attitude integration
- velocity integration
- position integration
- output computation
- built-in test (Ref. 34-18-00).
The IR architecture utilizes two processors:
- H5301 for interface with sensors and inertial computation
- MOTOROLA 68000 for I/O and maintenance functions.
The IR software operates in one of three basic modes: alignment,
navigation, or a reversionary attitude mode. These modes include various
portions of the major functions. The real-time executive and built-in
test functions interface with each function in each mode.
R
EFF :
001-050, 053-099, 34-14-00
Page 5
Config-1 Nov 01/00
TAI
ADIRU - IR Block Diagram
Figure 001
R
EFF :
001-050, 053-099, 34-14-00
Page 6
Config-1 Nov 01/00
TAI
ADIRU - IR Signal Flow Diagram
Figure 002
R
EFF :
001-050, 053-099, 34-14-00
Page 7
Config-1 Nov 01/00
TAI
During this submode, the results of the coarse level processing are
sharpened to have a better knowledge of the coordinate frame.
- position entry data processing
This position initialization can take place in coarse level
processing or gyro-compass processing.
The latitude and longitude pair processed for position
initialization is received from the same source (FMGC 1, FMGC 2 or
CDU).
As soon as a valid position initialization pair is received, the
software performs a BITE test to check if the entered latitude and
longitude are within the following limits versus the position
recorded at the end of the last power- up cycle:
Abs val( lat entered - lat recorded ) less than or equal to 1 deg.
Abs val( long entered - long recorded ) less than or equal to 1 deg
(Ref. 34-18-00).
Abs val(cos (lat est) - cos (lat ent)) less than or equal to
0.01234.
Abs val(sin (lat est) - sin (lat ent)) less than or equal to
0.01234.
R
EFF :
001-050, 053-099, 34-14-00
Page 8
Config-1 Nov 01/00
TAI
(2) Navigation (NAV) mode
(Ref. Fig. 003)
The NAV mode is the primary operating mode for the IR and is
implemented in software as unaided strapdown inertial navigation
computation. The basic operating elements consist of three
integration functions (attitude, velocity and position) driven by
input gyro and accelerometer strapdown sensor data.
The equations used to compute the main parameters are the following:
- flight path angle (label 322) = angle between the aircraft velocity
vector and the horizontal plane
(VZ)
FPA = Arc tan (--)
(VG)
where : VZ = inertial vertical speed (label 365)
VG = ground speed (label 312)
R
EFF :
001-050, 053-099, 34-14-00
Page 9
Config-1 Nov 01/00
TAI
ADIRU - Navigation Mode Functions
Figure 003
R
EFF :
001-050, 053-099, 34-14-00
Page 10
Config-1 Nov 01/00
TAI
- flight path acceleration (label 323) = aircraft acceleration along
the total velocity vector
Vx.Ax + Vy.Ay + Vz.Az
Flt Path Accel = ---------------------
______________
/ 2 2 2
V Vx + Vy + Vz
where : Ax, Ay, Az, Vx, Vy, Vz: accelerations and velocities in the
earth frame.
The TAS is received from the ADR. The ADR source to be used is
selected according to the configuration of the discretes described
in para. 2.B.(3)(d). The IR does not compute the wind if the TAS is
less than 100 knots or if the air data sources are no more
available. In this case, the wind labels are sent with their status
matrix coded NCD (No Computed Data).
R
EFF :
001-050, 053-099, 34-14-00
Page 11
Config-1 Nov 01/00
TAI
IR - Baro Inertial Altitude Filter
Figure 004
R
EFF :
001-050, 053-099, 34-14-00
Page 12
Config-1 Nov 01/00
TAI
The ADR source to be used is selected according to the
configuration of the discretes described in para. 2.B.(3)(d). When
no ADR source is available, the labels 361 and 365 are sent with
their status matrix coded NCD (No Computed Data).
R
EFF :
001-050, 053-099, 34-14-00
Page 13
Config-1 Nov 01/00
TAI
The magnetic heading may also be valid if an initialization value
has been sent by the FMGC (through the MCDU) or the CDU (Ref. para.
D - IR output data for the complete list of valid outputs).
D. IR Output Data
R
EFF :
001-050, 053-099, 34-14-00
Page 14
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 010 |PPOS LAT |W |Deg | | 6 |500 |BCD |LATP | |
| | |90S-90N |& | | | | | | |
| | |0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 011 |PPOS LONG |W |Deg | | 6 |500 |BCD | | |
| | |180E-180W |& | | | | | | |
| | |0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 012 |GROUND |W 0 to 2000 |Kts | | 4 |500 |BCD | GS | |
| |SPEED |0 to 1000 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 013 |TRK ANGLE |W 0 to 359.9|Deg | | 4 |500 |BCD | | |
| |TRUE |R 0.1 | | | | | | | |
| | |+/- 2.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 014 |MAG HDG |W 0 to 359.9|Deg | | 4 |500 |BCD | MH | |
| | |R 0.1 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 015 |WIND SPEED|W 0 to 256 |Kts | | 3 |500 |BCD | WS | |
| | |R 1 | | | | | | | |
| | |+/- 9 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 016 |WIND DIR |W 0 to 359 |Deg | | 3 |500 |BCD | WD | |
| |TRUE |R 1 | | | | | | | |
| | |+/- 10 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 041 |SET LAT |W +/- 180 |Deg | | 6 |500 |BCD | | |
| | |90S-90N |& | | | | | | |
| | |R 0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 042 |SET LONG |W +/- 180 |Deg | | 6 |500 |BCD | | |
| | |R 0.1 |& | | | | | | |
| | | |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 043 |SET MAG |W 0 to 359.9|Deg | | 4 |500 |BCD | | |
R
EFF :
001-050, 053-099, 34-14-00
Page 15
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |HDG |R 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 044 |TRUE HDG |W 0 to 359.9|Deg | | 4 |500 |BCD |THDG | |
| | |R 0.1 | | | | | | | |
| | |+/- 0.4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 052 |PITCH |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 053 |ROLL |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 054 |YAW |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 310 |PPOS LAT |W +/- 180 |Deg | 29 | 20 |200 |BNR | | |
| | |+/- 90 |& | | | | | | |
| | |R 0.00017 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 311 |PPOS LONG |W +/- 180 |Deg | 29 | 20 |200 |BNR |LONP | |
| | |R 0.00017 |& | | | | | | |
| | | |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 312 |GROUND |W 0 to 4096 |Kts | | 15 | 40 |BNR | | |
| |SPEED |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 313 |TRK - TRUE|W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.23 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 314 |TRUE HDG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
001-050, 053-099, 34-14-00
Page 16
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 315 |WIND |W 0 to 256 |Kts | | 15 |100 |BNR | | |
| |SPEED |0 to 100 | | | | | | | |
| | |R 0.0078 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 316 |WIND DIR |W +/- 180 |Deg | 29 | 15 |100 |BNR | | |
| |- TRUE |+/- 180 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 10 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 317 |TRK - MAG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 320 |MAG HDG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |82 N to 60 S| | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 321 |DRIFT |W +/- 180 |Deg | 29 | 15 | 40 |BNR | DA | |
| |ANGLE |+/- 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 2.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 322 |FLIGHT |W +/- 180 |Deg | 29 | 15 | 40 |BNR | FPA | |
| |PATH |+/- 90 | | | | | | | |
| |ANGLE |R 0.0055 | | | | | | | |
| | |+/- 0.28 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 323 |FLT PATH |W +/- 4 | g | 29 | 15 | 20 |BNR |FPAC | |
| |ACCEL |R 0.0001 | | | | | | | |
| | |+/- 10 % of | | | | | | | |
| | |outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 324 |PITCH |W +/- 180 |Deg | 29 | 15 | 20 |BNR |PTCH | |
| |ANGLE |-90 to + 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.05 | | | | | | | |
R
EFF :
001-050, 053-099, 34-14-00
Page 17
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 325 |ROLL |W +/- 180 |Deg | 29 | 15 | 20 |BNR |ROLL | |
| |ANGLE |-90 to + 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.05 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 326 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |PTCR | |
| |PITCH RATE|+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 327 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |ROLR | |
| |ROLL RATE |+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 330 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |YAW | |
| |YAW RATE |+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 331 |BODY LONG |W +/- 4 | g | 29 | 15 | 20 |BNR |LONG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 332 |BODY LAT |W +/- 4 | g | 29 | 15 | 20 |BNR |LATG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 333 |BODY NORM |W +/- 4 | g | 29 | 15 | 20 |BNR |VRTG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 334 |PLATFORM |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| |HEADING |R 0.0055 | | | | | | | |
R
EFF :
001-050, 053-099, 34-14-00
Page 18
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |+/- 0.23 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 335 |TRK ANGLE |W +/- 32 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.0039 |s | | | | | | |
| | |+/- 0.17 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 336 |PITCH ATT |W +/- 128 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.0039 |s | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 337 |ROLL ATT |W +/- 128 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.0039 |s | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 360 |POTENTIAL |W +/- 32768 |ft /| 29 | 15 | 20 |BNR | | |
| |V/S |R 1.0 | min| | | | | | |
| | |+/- 30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 361 |INERTIAL |W +/- 131072|ft | 29 | 20 | 40 |BNR | | |
| |ALT |R 0.125 | | | | | | | |
| | |+/- 5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 362 |ALONG TRK |W +/- 4 | g | 29 | 15 | 20 |BNR | | |
| |HORIZ |R 0.00012 | | | | | | | |
| |ACCEL |+/- 10 % | | | | | | | |
| | |of outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 363 |CROSS TRK |W +/- 4 | g | 29 | 15 | 20 |BNR | | |
| |HORIZ |R 0.00012 | | | | | | | |
| |ACCEL |+/- 10 % | | | | | | | |
| | |of outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 364 |VERTICAL |W +/- 4 | g | 29 | 15 | 20 |BNR |VACC | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.00012 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 365 |INERTIAL |W +/- 32768 |ft /| 29 | 15 | 20 |BNR |IVV | |
R
EFF :
001-050, 053-099, 34-14-00
Page 19
Config-1 Nov 01/00
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |V/S |R 1.0 |min | | | | | | |
| | |+/- 30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 366 |N - S |W +/- 4096 |Kts | 29 | 15 |100 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 367 |E - W |W +/- 4096 |Kts | 29 | 15 |100 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 270 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 275 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 2 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 276 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 3 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 277 |IRS TEST | | | | |500 |HYB | | |
| |WORD | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 350 |ACTION | | | | |500 |HYB | | |
| |CODE | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 351 |IR MAINT | | | | |500 |DIS | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 354 |TOTAL TIME| | | | |500 |BNR | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 356 |FAULT STAT| | | | | |ISO | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 377 |EQUIP | | | | |500 |HEX | | |
| |IDENT | | | | | | | | |
-------------------------------------------------------------------------------
Table 7 :IR Digital Output Characteristics
R
EFF :
001-050, 053-099, 34-14-00
Page 20
Config-1 Nov 01/00
TAI
----------------------------------------------------------------------------
| BIT | SIGNAL | 1 CONDITION |
|-----|--------------------|-----------------------------------------------|
| 1 | 1 - | |
| 2 | 0 | | |
| 3 | 1 | | |
| 4 | 1 | LABEL 270 | |
| 5 | 1 | | |
| 6 | 0 | | |
| 7 | 0 | | |
| 8 | 0 - | |
| 9 | SDI - LSB | |
| 10 | SDI - MSB | |
| 11 | Alignment Not Ready| In Align Submode |
| 12 | Rev Att Mode | In Attitude Mode |
| 13 | Nav Mode | In Nav Mode |
| 14 | Valid Set Heading | A valid set heading has to be input to the |
| | | IR. Magnetic heading outputs are no longer |
| | | being computed, but have the characteristics |
| | | of a Free Direction Gyro. |
| 15 | Attitude Invalid | Attitude Critical Fault |
| 16 | DC Fail | DC Power Less Than 18V |
| 17 | On DC | On DC Power |
| 18 | ADR Fault | The IR has detected an ADR input (TAS, ALT |
| | | and ALT RATE) as FW or NCD. Note functional |
| | | test data is ignored by the IR and last valid |
| | | input is used. |
| 19 | IR Failure | Navigation (Non Critical) Fault |
| 20 | DC Fail - On DC | The IR has detected that a DC fail occurred |
| | | while on DC from last turn on. |
| 21 | Align Fault | The IR has detected a position miscompare |
| | | or a Quality of Align fault. |
| 22 | No IR Initial | IR does not have position data or data |
| | | received is invalid. |
| 23 | Excess Motion Error| X or Y velocity greater than 0.011 ft/s |
| | | during align. |
| 24 | ADR/IR Fault | No data has been received from the ADR or |
| | | was received with a parity error. |
| 25 | Extreme Latitude | Latitude exceeds 73⁰N (+/-0.5⁰ hysteresis) |
| | | while Longitude is between 120⁰W and 90⁰W |
| | | (+/-2.5⁰ hysteresis) or Latitude exceeds |
| | | 82⁰N (+/-0.5⁰ hysteresis) or Latitude |
| | | exceeds 60⁰S (+/-0.5⁰ hysteresis). |
| | | Magnetic Deviation is set to zero. |
| 26 | Align Time Status | Bits 28 27 26 Time Until Nav |
| 27 | | 1 1 1 7 - 10 minutes |
| 28 | | 1 1 0 6 minutes |
R
EFF :
001-050, 053-099, 34-14-00
Page 21
Config-1 Nov 01/00
TAI
----------------------------------------------------------------------------
| BIT | SIGNAL | 1 CONDITION |
|-----|--------------------|-----------------------------------------------|
| | | 1 0 1 5 minutes |
| | | 1 0 0 4 minutes |
| | | 0 1 1 3 minutes |
| | | 0 1 0 2 minutes |
| | | 0 0 1 1 minute |
| | | 0 0 0 IN NAV MODE ONLY |
| 29 | COMPUT LAT MISCOMP | SIN/COS OF LATITUDE TEST FAILED |
| 30 | SSM | |
| 31 | SSM | |
| 32 | Parity | |
----------------------------------------------------------------------------
Digital Word 270 (IR Discretes)
R
EFF :
001-050, 053-099, 34-14-00
Page 22
Config-1 Nov 01/00
TAI
Digital Word 275 IR Discrete 2
Figure 005
R
EFF :
001-050, 053-099, 34-14-00
Page 23
Config-1 Nov 01/00
TAI
Digital Word 276 IR Discrete 3
Figure 006
R
EFF :
001-050, 053-099, 34-14-00
Page 24
Config-1 Nov 01/00
TAI
Digital Word 351 IR Maintenance
Figure 007
R
EFF :
001-050, 053-099, 34-14-00
Page 25
Config-1 Nov 01/00
TAI
The data field of the test word 277 (21 bits) alternates between the
four first patterns shown in the following table below, except during
the REALIGN DECISION submode, and the POWER OFF submode. During these
submodes the data field shall be as shown in pattern 5.
----------------------------------------------------------------------------
| BIT | DEFINITION |
|--------------------------------------------------------------------------|
| 1 | 1 - |
| 2 | 0 | |
| 3 | 1 | |
| 4 | 1 | LABEL 277 |
| 5 | 1 | |
| 6 | 1 | |
| 7 | 1 | |
| 8 | 1 - |
|--------------------------------------------------------------------------|
| 9 | SDI |
| 10 | SDI |
|---------|----------------------------------------------------------------|
| |PATTERN 1 |PATTERN 2|PATTERN 3|PATTERN 4| PATTERN 5 |
|---------|----------|---------|---------|---------|-----------------------|
| 11 | 0 | 0 | 1 | 1 | BCD MODE TIMER |
| 12 | 1 | 1 | 0 | 0 | (LSD) |
| 13 | 0 | 1 | 1 | 0 | (REALIGN AND |
| 14 | 1 | 1 | 0 | 0 | POWER OFF) |
|---------|----------|---------|---------|---------------------------------|
| 15 | 0 | 0 | 1 | 1 | BCD MODE TIMER |
| 16 | 1 | 1 | 0 | 0 | (MSD) |
| 17 | 0 | 1 | 1 | 0 | (REALIGN AND |
| 18 | 1 | 1 | 0 | 0 | POWER OFF) |
|---------|----------|---------|---------|---------------------------------|
| | | | | | MODE FLAG: |
| 19 | 0 | 0 | 1 | 1 | 00 = PWR OFF SUBMODE |
| 20 | 1 | 1 | 0 | 0 | 11 = REALIGN DECISION |
| | | | | | SUBMODE |
|---------|----------|---------|---------|---------|-----------------------|
| 21 | 0 | 1 | 1 | 0 | 0 |
| 22 | 1 | 1 | 0 | 0 | 0 |
| 23 | 0 | 0 | 1 | 1 | 0 |
| 24 | 1 | 1 | 0 | 0 | 0 |
| 25 | 0 | 1 | 1 | 0 | 0 |
| 26 | 1 | 1 | 0 | 0 | 0 |
| 27 | 0 | 0 | 1 | 1 | 0 |
| 28 | 1 | 1 | 0 | 0 | 0 |
| 29 | 0 | 1 | 1 | 0 | 0 |
| 30 | 0 | 0 | 1 | 0 | 0 |
R
EFF :
001-050, 053-099, 34-14-00
Page 26
Config-1 Nov 01/00
TAI
----------------------------------------------------------------------------
| BIT | DEFINITION |
|--------------------------------------------------------------------------|
| 31 | 0 | 0 | 1 | 1 | 0 |
|---------|----------|---------|---------|---------|-----------------------|
| 32 | Parity |
----------------------------------------------------------------------------
Digital Word 277 (CDU Test Word)
NOTE : Time (seconds) remaining in the POWER OFF submode and the time
____
(seconds) remaining in the REALIGN DECISION submode are
transmitted with the BCD data (bits 11-18).
----------------------------------------------------------------------------
| BIT | DEFINITION |
|--------------------------------------------------------------------------|
| 1 | 1 - |
| 2 | 1 | |
| 3 | 1 | |
| 4 | 0 | LABEL 350 |
| 5 | 1 | |
| 6 | 0 | |
| 7 | 0 | |
| 8 | 0 - |
|--------------------------------------------------------------------------|
| 9 | SDI - LSB |
| 10 | SDI - MSB |
|--------------------------------------------------------------------------|
| 11 TO 14 | SPARE |
|----------|---------------------------------------------------------------|
| 15 | TIME UNTIL NAV LEAST |
| 16 | TIME UNTIL NAV SIGNIFICANT |
| 17 | TIME UNTIL NAV DIGIT |
| 18 | TIME UNTIL NAV (BCD) |
|----------|---------------------------------------------------------------|
| 19 | TIME UNTIL NAV MOST |
| 20 | TIME UNTIL NAV SIGNIFICANT |
| 21 | TIME UNTIL NAV DIGIT |
| 22 | TIME UNTIL NAV (BCD) |
|----------|---------------------------------------------------------------|
| 23 | Action Code (1) Least |
| 24 | Action Code (1) Significant |
| 25 | Action Code (1) Digit |
| 26 | Action Code (1) |
|----------|---------------------------------------------------------------|
| 27 | Action Code (1) Most |
| 28 | Action Code (1) Significant |
R
EFF :
001-050, 053-099, 34-14-00
Page 27
Config-1 Nov 01/00
TAI
----------------------------------------------------------------------------
| BIT | DEFINITION |
|--------------------------------------------------------------------------|
| 29 | Action Code (1) Digit |
|----------|---------------------------------------------------------------|
| 30 | SSM |
| 31 | SSM |
| 32 | Parity |
----------------------------------------------------------------------------
Digital Word 350 (Action Code)
---------------------------------------------------------------------------
| ACTION CODE | MAINTENANCE MESSAGE | DESCRIPTION |
|-------------|---------------------|-------------------------------------|
| 01 | IR FAULT | Critical failure; Remove ADIRU for |
| | | maintenance |
| 02 | DELAYED MAINT | Non-Critical failure; Service ADIRU |
| | | when convenient |
| 03 | ENTER PPOS | Enter present position |
| 04 | SELECT ATT | Hard failure; Select ATTITUDE MODE |
| 05 | EXCESS MOTION | Excess motion detected during ALIGN |
| 06 | SWITCH ADR | Air Data Reference invalid |
| 07 | CHK C/B | Check circuit breakers |
| 08 | CDU FAULT | Remove CDU for maintenance |
| 09 | ENTER HEADING | Enter heading for ATTITUDE MODE |
R | 10 | | Unassigned |
----------------------------------------------------------------------------
Action Code - Maintenance Messages
EFF :
001-050, 053-099, 34-14-00
Page 28
Config-1 May 01/07
TAI
IR - Binary Output Words
Figure 008
R
EFF :
001-050, 053-099, 34-14-00
Page 29
Config-1 Nov 01/00
TAI
IR - BCD and Special Output Words
Figure 009
R
EFF :
001-050, 053-099, 34-14-00
Page 30
Config-1 Nov 01/00
TAI
(2) Discrete outputs
The IR provides three discrete outputs.
The following table defines the characteristics of these discretes.
---------------------------------------
| SIGNAL | OUTPUT | DEFINITION |
|----------|-------------|------------|
| ON BAT | OPEN/+28VDC | NO/YES |
| IR FAULT | OPEN/+28VDC | NO/YES |
| IR ALIGN | OPEN/GROUND | NO/YES |
---------------------------------------
Discrete Outputs
- ON BAT
When the IR is powered with batteries, this discrete delivers a
28VDC state and sets the ON BAT light to on.
- IR FAULT
When a failure is detected by the IR, this discrete delivers a
28VDC state and sets the FAULT legend to on.
- IR ALIGN
When the IR is aligning, this discrete delivers a ground and sets
the ALIGN legend to on.
R
EFF :
001-050, 053-099, 34-14-00
Page 31
Config-1 Nov 01/00
TAI
3. Operation/Control
________________________________
and Indicating
R (Ref. Fig. 010)
R A. Control
EFF :
001-050, 053-099, 34-14-00
Page 32
Config-1 Feb 01/08
TAI
IR - Operation/Control and Indicating
R Figure 010
EFF :
001-050, 053-099, 34-14-00
Page 33
Config-1 Feb 01/08
TAI
IR - Alignment Procedure from the MCDU
R Figure 011
EFF :
001-050, 053-099, 34-14-00
Page 34
Config-1 Feb 01/08
TAI
IR - Mode State Diagram
R Figure 012
EFF :
001-050, 053-099, 34-14-00
Page 35
Config-1 Feb 01/08
TAI
For high latitudes, the alignment is provided by an
operational procedure which delays the entering of the initial
position by the crew. Accuracies of the system are slightly
degraded.
- a message on the upper ECAM DU indicates that the IRs are in ALIGN
submode with the maximum time until NAV
- in the NAV mode, rapid realignment of the IR is initiated by
switching the OFF/NAV/ATT selector switch from NAV to OFF and back
to NAV within 5 seconds. The IR starts a 30-second realignment
submode with existing attitude and heading angles and rezeroed
velocities
- the system does not enter the rapid realignment sequence if the
ground speed is greater than 20 knots
The CDU permits to observe some particular parameters (Ref.
34-12-00).
EFF :
001-050, 053-099, 34-14-00
Page 36
Config-1 Feb 01/08
TAI
MCDU - INIT Page
R Figure 013
EFF :
001-050, 053-099, 34-14-00
Page 37
Config-1 Feb 01/08
TAI
The message ENTER PPOS is displayed on the CDU (DATA DISPLAY
selector switch in STS position).
The discrepancy exists when:
- the cosine of entered latitude differs from the computed cosine
of latitude by more than 0.01234, or
- the sine of entered latitude differs from the computed sine of
latitude by more than 0.01234.
The miscompare is removed if a subsequent entry of Set Latitude
passes the test.
If sin/cos test fails two times with identical set latitude
inputs then:
- the IR FAULT legend flashes on the CDU
- a warning message appears on the upper ECAM DU:
NAV IR 1(2)(3) FAULT.
EFF :
001-050, 053-099, 34-14-00
Page 38
Config-1 Feb 01/08
R
TAI
R (4) ATT (Attitude) mode
The IR has a reversionary mode which can be activated only by manual
selection of ATT mode on the CDU. The mode can be activated on the
ground or in flight and is intended to provide a rapid
attitude/heading restart capability in the event that the IR has
experienced a total power shutdown or a failure has occurred
resulting in the following:
- IR FAULT legend flashing on the CDU
- IR 1(2)(3) FAULT message displayed on the upper ECAM DU:
IR x MODE SEL...ATT
- SELECT ATT message displayed on the CDU (DATA DISPLAY selector
switch in STS position).
The IR is designed so that the ATT mode can be used after BITE has
detected failures which will cause excessive NAV mode data errors but
does not disable the ATT mode mechanization. However, it is
recommended to stay in NAV mode even with excessive navigation errors
because of higher accuracy of attitude signals and a more complete
signal processing. The ATT mode must always be used after loss of
power or a similar situation in flight where a new alignment/leveling
is required.
The ENTER HEADING message is displayed on the CDU (DATA DISPLAY
selector switch in STS position) when the ATT mode is selected until
valid heading initialization is received from the MCDU or the CDU.
The ATT mode is normally engaged with the aircraft in level flight.
A 20-second period is needed with the aircraft in level flight to
perform an attitude erection to initialize a level attitude. During
this period, the data normally computed in ATT mode have SSMs set to
NCD.
In the event the ATT mode is engaged with the aircraft not in level
flight, an erection cut-out function delays erection when yaw rate
exceeds 0.5 deg/s and permits erection to continue when yaw rate
drops below 0.25 deg/s. Twenty seconds of flight with the erection
cut-out switch disengaged is required to erect the attitude.
R B. Indicating
Attitude and heading information is computed by the ADIRU (IR portion)
and processed by the associated DMC. The attitude data are displayed on
the PFD and the heading data are displayed on the PFD, the ND and the
VOR/DME RMI.
In addition, vertical speed (V/S) is displayed on the PFD and Ground
Speed and wind indications are displayed on the ND.
In normal configuration, with the ATT/HDG selector switch in NORM
position, the IR1 data are displayed on the CAPT PFD, ND and the VOR/DME
RMI (Ref. ATA 34-57-00). The IR2 data are displayed on the F/O PFD and
ND.
EFF :
001-050, 053-099, 34-14-00
Page 39
Config-1 Feb 01/08
TAI
The following parameters can be displayed on the CDU liquid crystal
display according to the position of the DATA DISPLAY selector switch on
the CDU:
- wind (WIND)
- present position (PPOS)
- true heading (HDG)
- status of selected system conditions (STS)
- track and ground speed (TK/GS)
- test values (TEST).
The sources of the data displayed are controlled by the SYS DISPLAY
selector switch on the CDU.
EFF :
001-050, 053-099, 34-14-00
Page 40
Config-1 Feb 01/08
TAI
IR - Attitude Information Display
R Figure 014
EFF :
001-050, 053-099, 34-14-00
Page 41
Config-1 Feb 01/08
TAI
(c) Attitude failure
In case of attitude failure concerning the pitch and/or roll
information, the attitude sphere goes out of view and is replaced
by a red ATT flag which flashes for a few seconds then remains
steady (item C).
In case of discrepancy detected by the FWC between the pitch or
roll attitude information presented on the CAPT and F/O PFDs, a
CHECK ATT amber message flashes for a few seconds on both PFDs,
then remains steady (item D).
(b) On the ND
R (Ref. Fig. 016)
The heading data is displayed on the ND in the three following
operating modes: ROSE, ARC and PLAN.
The ROSE mode and the ARC mode are oriented with respect to the
aircraft heading, while the PLAN mode is oriented with respect to
the true north.
1
_ True heading display
In ROSE or ARC mode, when true heading is displayed, a cyan
TRUE indication appears at the top of the ND.
EFF :
001-050, 053-099, 34-14-00
Page 42
Config-1 Feb 01/08
TAI
IR - Heading Information Display on the PFD
R Figure 015
EFF :
001-050, 053-099, 34-14-00
Page 43
Config-1 Feb 01/08
TAI
IR - Heading Information Display on the ND
R Figure 016
EFF :
001-050, 053-099, 34-14-00
Page 44
Config-1 Feb 01/08
TAI
2
_ ROSE mode (item A)
In this mode, each pilot has three different sub-modes of
presentation on his ND: ROSE-ILS/ROSE-VOR/ROSE-NAV.
In the three ROSE sub-modes, the ND provides a display which
is similar to that of a conventional HSI, i.e. a rotating
heading dial orientated to the North and giving to the pilot
the aircraft actual magnetic or true heading with as reference
the fixed yellow lubber line at the top of the dial.
3
_ ARC mode (item B)
In this mode, the ND displays a 90 deg. heading sector ahead
of the aircraft giving the aircraft actual magnetic or true
heading with respect to the fixed yellow lubber line at the
top of the scale.
4
_ PLAN mode
The ND displays a static map orientated with respect to the
true North.
5
_ Heading failure (items C and D)
In case of heading failure, the scale and all symbols
positioned on the ROSE and ARC scales go out of view; a red
HDG flag comes into view below the scale after flashing for a
few seconds, when the DMC has detected an anomaly concerning
the heading parameter.
In addition, if a discrepancy between CAPT and F/O sides is
detected by the comparison inside the FWCs, the CHECK HDG
message is displayed in amber on both NDs (item E).
EFF :
001-050, 053-099, 34-14-00
Page 45
Config-1 Feb 01/08
TAI
IR - Heading Information Display on the VOR/DME RMI
R Figure 017
EFF :
001-050, 053-099, 34-14-00
Page 46
Config-1 Feb 01/08
TAI
(3) Ground speed
R (Ref. Fig. 018)
The ground speed is displayed in the left upper corner of the ND for
ROSE, ARC or PLAN mode (item A).
The GS title is displayed in white color and the ground speed value
in green.
In case of failure or NCD, the ground speed value is replaced by
three dashed lines (item B).
The ground speed can also be displayed on the CDU if the DATA DISPLAY
selector switch is placed in the TK/GS position.
(b) a fixed white scale with 500 ft/mn spaced marks from -2000 ft/mn
to +2000 ft/mn
(c) a needle giving in analog form the actual vertical speed value
EFF :
001-050, 053-099, 34-14-00
Page 47
Config-1 Feb 01/08
TAI
IR - GS, Wind, Vertical Speed Information Display
R Figure 018
EFF :
001-050, 053-099, 34-14-00
Page 48
Config-1 Feb 01/08
TAI
(e) above +6000 ft/mn (or below -6000 ft/mn), the needle remains
stopped where it is.
When the vertical speed exceeds +6000 ft/mn or -6000 ft/mn, the
digital indication and the analog needle change from green to
amber.
R C. Warnings
R (Ref. Fig. 019, 020, 021, 022, 023)
(1) In addition to the ATT or HDG flags displayed on the PFDs, NDs and on
the CDU, warning messages are displayed on the lower part of the
upper ECAM DU.
EFF :
001-050, 053-099, 34-14-00
Page 49
Config-1 Feb 01/08
TAI
NAV IR 1(2)(3) FAULT Message
R Figure 019
EFF :
001-050, 053-099, 34-14-00
Page 50
Config-1 Feb 01/08
TAI
NAV IR 1+2 FAULT Message
R Figure 020
EFF :
001-050, 053-099, 34-14-00
Page 51
Config-1 Feb 01/08
TAI
NAV IR 1+3 (2+3) FAULT Message
R Figure 021
EFF :
001-050, 053-099, 34-14-00
Page 52
Config-1 Feb 01/08
TAI
NAV ATT DISCREPANCY Message
R Figure 022
EFF :
001-050, 053-099, 34-14-00
Page 53
Config-1 Feb 01/08
TAI
NAV HDG DISCREPANCY Message
R Figure 023
EFF :
001-050, 053-099, 34-14-00
Page 54
Config-1 Feb 01/08
TAI
- the MASTER CAUT lights on the glareshield come on
- the Single Chime (SC) sounds
- the CHECK HDG message appears on the PFDs and NDs.
(2) When the CLR key is pushed on the ECAM control panel, a status page
is displayed on the lower ECAM DU and indicates the STATUS and INOP
SYS (systems).
(1) History
The inertial parameters to be considered to evaluate the level of
performance of an inertial system after flight completion are:
- the radial position error (in NM)
- the residual ground speed error (in kts).
Depending on their magnitude noticed at the end of the flight, the
concerned inertial system(s) shall or shall not be removed from the
aircraft.
EFF :
001-050, 053-099, 34-14-00
Page 55
Config-1 Feb 01/08
TAI
ADIRU - Radial Position Error - Removal Criteria
R Figure 024
EFF :
001-050, 053-099, 34-14-00
Page 56
Config-1 Feb 01/08
TAI
It should be pointed out that the adverse impacts of such
inaccuracies over the radial position error will reveal stronger
for short flight durations (below 1.5 hour).
- Flight duration < 1.5 FH:
The lower limit of the grey band is fixed at 5 NM.
- 1.5 FH < Flight duration < 10 FH:
The lower limit of the grey band is fixed at 2T + 2.
- Flight duration > 10 FH:
The lower limit of the grey band is fixed at 22 NM.
(b) Compare the recorded ground speed values with the following
limits:
- if the residual ground speed error is 15 kts or greater after
each of two consecutive flights, replace the ADIRU
- if the residual ground speed error is 21 kts or greater at the
end of any one flight, replace the ADIRU.
EFF :
001-050, 053-099, 34-14-00
Page 57
Config-1 Feb 01/08
R
TAI
ATTITUDE, HEADING AND POSITION - DESCRIPTION AND OPERATION
__________________________________________________________
1. General
_______
The Inertial Reference (IR) portion of the Air Data/Inertial Reference Unit
(ADIRU) provides main data sources which are precision attitude, magnetic
heading references and navigation data to the aircraft avionics systems.
Attitude, heading and navigation data are displayed on the Electronic Flight
Instrument System (EFIS) displays (Primary Flight Display (PFD); Navigation
Display (ND)) and on the Digital Distance and Radio Magnetic Indicator
(DDRMI) which recopies the heading data.
The IR portion also provides data from the selected GPSSU and accurate GPIR
hybrid position.
The Inertial Reference (IR) portion of the Air Data/Inertial Reference Unit
(ADIRU) provides main data sources which are precision attitude, magnetic
heading references and navigation data to the aircraft avionics systems.
Attitude, heading and navigation data are displayed on the Electronic Flight
Instrument System (EFIS) displays (Primary Flight Display (PFD); Navigation
Display (ND)) and on the Digital Distance and Radio Magnetic Indicator
(DDRMI) with recopies the heading data.
The IR portion also provides data from the selected MMR and accurate GPIR
hybrid position.
2. __________________
System Description
A. General
The IR portion is a strapdown inertial system which provides a quality
reference for attitude, heading (true and magnetic), angular rates and
accelerations.
The IR software also computes:
- the inertial position
- the ground velocities
- the baro inertial vertical speed
- the drift angle
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 1
Config-2 Nov 01/08
TAI
- the wind data
- the flight path data.
B. Inputs
A. General
The IR portion is a strapdown inertial system which provides a quality
reference for attitude, heading (true and magnetic), angular rates and
accelerations.
The IR software also computes:
- the inertial position
- the ground velocities
- the baro inertial vertical speed
- the drift angle
- the wind data
- the flight path data.
The GPS partition integrated in the IR portion provides both the GPS
autonomous and hybrid navigation solutions. The term hybrid is
used to indicate that the navigation solution is a result of combining
the GPS, Inertial, and Air Data altitude data. The autonomous
navigation solution denotes a solution derived solely by the MMR using
only satellite data. For each type of data, hybrid and autonomous, the
software provides:
- the position
- the velocities (Ground, N/S, E/W)
- the accuracy parameters
- the integrity parameters.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 2
Config-2 Nov 01/08
TAI
B. Inputs
R These data words are used for initialization and BITE purposes.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 3
Config-2 Nov 01/08
TAI
R - labels 301 to 303: AIRCRAFT TAIL NUMBER
R For more details, Ref. 34-18-00.
These data words are used for initialization and BITE purposes,
and barometric data setting.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page 4
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R These data words are used for initialization and BITE purposes
R and barometric data setting.
R
EFF :
401-499,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 5
Config-2 Nov 01/08
TAI
- label 071: SV POSITION Y FINE
- label 072: SV POSITION Z
- label 073: SV POSITION Z FINE
- label 074: UTC MEASURE TIME
- label 076: GPS ALTITUDE (MSL)
- label 101: GPS HDOP
- label 102: GPS VDOP
- label 103: GPS TRACK ANGLE
- label 110: GPS LATITUDE
- label 111: GPS LONGITUDE
- label 112: GPS GROUND SPEED
- label 120: GPS LATITUDE FINE
- label 121: GPS LONGITUDE FINE
- label 125: GPS UTC BCD
- label 130: GPS HORIZONTAL INTEGRITY LIMIT
- label 136: GPS VERTICAL FOM
- label 140: GPS UTC FINE
- label 141: GPS UTC FINE FRACTIONS
- label 143: TERMINAL AREA HIL
- label 150: GPS UTC BIN
- label 162: DESTINATION ETA
- label 163: ALT WAYPOINT ETA
- label 165: GPS VERTICAL VELOCITY
- label 166: GPS N/S VELOCITY
- label 174: GPS E/W VELOCITY
- label 247: GPS HORIZONTAL FOM
- label 260: GPS DATE
- label 273: GPS SENSOR STATUS
- label 343: DESTINATION HIL
- label 347: ALT WAYPOINT HIL
- label 377: EQUIPMENT IDENT
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-14-00
Page 6
Config-2 Nov 01/08
TAI
- label 070: SV POSITION Y
- label 071: SV POSITION Y FINE
- label 072: SV POSITION Z
- label 073: SV POSITION Z FINE
- label 074: UTC MEASURE TIME
- label 076: GPS ALTITUDE (MSL)
- label 101: GPS HDOP
- label 102: GPS VDOP
- label 103: GPS TRACK ANGLE
- label 110: GPS LATITUDE
- label 111: GPS LONGITUDE
- label 112: GPS GROUND SPEED
- label 120: GPS LATITUDE FINE
- label 121: GPS LONGITUDE FINE
- label 125: GPS UTC BCD
- label 126: SAT DE-SELECT 1
- label 127: SAT DE-SELECT 2
- label 130: GPS HORIZONTAL INTEGRITY LIMIT
- label 136: GPS VERTICAL FOM
- label 140: GPS UTC FINE
- label 141: GPS UTC FINE FRACTIONS
- label 143: TERMINAL AREA HIL
- label 144: APPROACH AREA HIL
- label 150: GPS UTC BIN
- label 162: DESTINATION ETA
- label 163: ALT WAYPOINT ETA
- label 165: GPS VERTICAL VELOCITY
- label 166: GPS N/S VELOCITY
- label 174: GPS E/W VELOCITY
- label 226: GPS DATA LOADER
- label 247: GPS HORIZONTAL FOM
- label 260: GPS DATE
- label 273: GPS SENSOR STATUS
- label 343: DESTINATION HIL
- label 347: ALT WAYPOINT HIL
- label 377: EQUIPMENT IDENT
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 7
Config-2 Nov 01/08
TAI
R **ON A/C 231-299, 314-399, 405-499,
R ---------------------------------------------------------------------
R | INPUT SIGNAL | INPUT | INPUT |
R | | | DEFINITION |
R ---------------------------------------------------------------------
R | Mounting position 1 | Open/GND | see table 2 |
R | Mounting position 2 | Open/GND | see table 2 |
R | SDI MSB (Middle insert) | Open/GND | 0/1 |
R | SDI LSB (Middle insert) | Open/GND | 0/1 |
R | CDU ON/OFF | Open/GND |Not displayed/displayed|
R | IR mode select M1 | Open/GND | see table 3 |
R | IR mode select M2 | Open/GND | see table 3 |
R | Auto ADR.DADS select | Open/GND | see table 4 |
R | Manual ADR.DADS select | Open/GND | see table 4 |
R | Aircraft Ident Code 1/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 2/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 4/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 8/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 16/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 32/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 64/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code Parity |Open/A.I. Com| 0/1 |
R | IR remote test | Open/GND | No test/test |
R | MAGVAR select | Open/GND |Standard/expended model|
R | GPS sensor 1 present | Open/GND | GND = present |
R | GPS sensor 2 present | Open/GND | GND = present |
R | GPS priority select | Open/GND |Normal priority/ |
R | | |Reserved priority |
R ---------------------------------------------------------------------
R Table 1 : IR Discrete Inputs
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 8
Config-2 Nov 01/08
TAI
R (a) Mounting positions 1 and 2
R These discrete inputs are used to indicate to the IR the
R orientation of the unit. It is needed to know the longitudinal
R and lateral axis of the aircraft.
R Table 2 below gives the unit position in function of the discrete
R selection.
R ---------------------------------------------------------------
R | Mounting | Mounting | Connector Position/Aircraft |
R | Position 1 | Position 2 | |
R ---------------------------------------------------------------
R | Open * | Open * | FWD * |
R | Ground | Open | AFT |
R | Open | Ground | RIGHT |
R | Ground | Ground | LEFT |
R ---------------------------------------------------------------
R Table 2 : Mounting Position Discretes
R ----------------------------------------------
R | M1 | M2 | OFF/NAV/ATT |
R | | | Selector Switch Position |
R |--------------------------------------------|
R | Open | Open | OFF |
R | Ground | Open | NAV |
R | Open | Ground | ATT |
R ----------------------------------------------
R Table 3 : IR Mode Select
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-14-00
Page 9
Config-2 Nov 01/08
TAI
R **ON A/C 231-299, 314-399,
---------------------------------------------------------------------
| INPUT SIGNAL | INPUT | INPUT |
| | | DEFINITION |
---------------------------------------------------------------------
| Mounting position 1 | Open/GND | see table 2 |
| Mounting position 2 | Open/GND | see table 2 |
| SDI MSB (Middle insert) | Open/GND | 0/1 |
| SDI LSB (Middle insert) | Open/GND | 0/1 |
| CDU ON/OFF | Open/GND |Not displayed/displayed|
| IR mode select M1 | Open/GND | see table 3 |
| IR mode select M2 | Open/GND | see table 3 |
| Auto ADR.DADS select | Open/GND | see table 4 |
| Manual ADR.DADS select | Open/GND | see table 4 |
| Aircraft Ident Code 1/0 |Open/A.I. Com| 0/1 |
| Aircraft Ident Code 2/0 |Open/A.I. Com| 0/1 |
| Aircraft Ident Code 4/0 |Open/A.I. Com| 0/1 |
| Aircraft Ident Code 8/0 |Open/A.I. Com| 0/1 |
| Aircraft Ident Code 16/0 |Open/A.I. Com| 0/1 |
| Aircraft Ident Code 32/0 |Open/A.I. Com| 0/1 |
| Aircraft Ident Code 64/0 |Open/A.I. Com| 0/1 |
| Aircraft Ident Code Parity |Open/A.I. Com| 0/1 |
| IR remote test | Open/GND | No test/test |
| MAGVAR select | Open/GND |Reserved/expended model|
| GPS sensor 1 present | Open/GND | GND = present |
| GPS sensor 2 present | Open/GND | GND = present |
| GPS priority select | Open/GND |Normal priority/ |
| | |Reserved priority |
---------------------------------------------------------------------
Table 1 : IR Discrete Inputs
EFF :
231-299, 314-399, 34-14-00
Page 10
Config-2 Nov 01/08
TAI
---------------------------------------------------------------
| Mounting | Mounting | Connector Position/Aircraft |
| Position 1 | Position 2 | |
---------------------------------------------------------------
| Open * | Open * | FWD * |
| Ground | Open | AFT |
| Open | Ground | RIGHT |
| Ground | Ground | LEFT |
---------------------------------------------------------------
Table 2 : Mounting Position Discretes
----------------------------------------------
| M1 | M2 | OFF/NAV/ATT |
| | | Selector Switch Position |
|--------------------------------------------|
| Open | Open | OFF |
| Ground | Open | NAV |
| Open | Ground | ATT |
----------------------------------------------
Table 3 : IR Mode Select
R ---------------------------------------------------------------------
R | INPUT SIGNAL | INPUT | INPUT |
R | | | DEFINITION |
R ---------------------------------------------------------------------
R | Mounting position 1 | Open/GND | see table 2 |
R | Mounting position 2 | Open/GND | see table 2 |
R | SDI MSB (Middle insert) | Open/GND | 0/1 |
R | SDI LSB (Middle insert) | Open/GND | 0/1 |
R | IR OFF | Open/GND |Momentary action |
R | IR mode select M1 | Open/GND | see table 3 |
R | IR mode select M2 | Open/GND | see table 3 |
R | Auto ADR.DADS select | Open/GND | see table 4 |
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 11
Config-2 Nov 01/08
TAI
---------------------------------------------------------------------
| INPUT SIGNAL | INPUT | INPUT |
| | | DEFINITION |
---------------------------------------------------------------------
R | Manual ADR.DADS select | Open/GND | see table 4 |
R | Aircraft Ident Code 1/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 2/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 4/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 8/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 16/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 32/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 64/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code Parity |Open/A.I. Com| 0/1 |
R | IR remote test | Open/GND | No test/test |
R | MAGVAR select | Open/GND |Reserved/expended model|
R | GPS sensor 1 present | Open/GND | GND = present |
R | GPS sensor 2 present | Open/GND | GND = present |
R | GPS priority select | Open/GND |Normal priority/ |
R | | |Reserved priority |
R ---------------------------------------------------------------------
R Table 1 : IR Discrete Inputs
R ---------------------------------------------------------------
R | Mounting | Mounting | Connector Position/Aircraft |
R | Position 1 | Position 2 | |
R ---------------------------------------------------------------
R | Open * | Open * | FWD * |
R | Ground | Open | AFT |
R | Open | Ground | RIGHT |
R | Ground | Ground | LEFT |
R ---------------------------------------------------------------
R Table 2 : Mounting Position Discretes
R
EFF :
405-499, 34-14-00
Page 12
Config-2 Nov 01/08
TAI
R ----------------------------------------------
R | M1 | M2 | OFF/NAV/ATT |
R | | | Selector Switch Position |
R |--------------------------------------------|
R | Open | Open | OFF |
R | Ground | Open | NAV |
R | Open | Ground | ATT |
R ----------------------------------------------
R Table 3 : IR Mode Select
R ---------------------------------------------------------------------
R | INPUT SIGNAL | INPUT | INPUT |
R | | | DEFINITION |
R ---------------------------------------------------------------------
R | Mounting position 1 | Open/GND | see table 2 |
R | Mounting position 2 | Open/GND | see table 2 |
R | SDI MSB (Middle insert) | Open/GND | 0/1 |
R | SDI LSB (Middle insert) | Open/GND | 0/1 |
R | IR mode select M1 | Open/GND | see table 3 |
R | IR mode select M2 | Open/GND | see table 3 |
R | Auto ADR.DADS select | Open/GND | see table 4 |
R | Manual ADR.DADS select | Open/GND | see table 4 |
R | Aircraft Ident Code 1/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 2/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 4/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 8/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 16/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 32/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code 64/0 |Open/A.I. Com| 0/1 |
R | Aircraft Ident Code Parity |Open/A.I. Com| 0/1 |
R | IR remote test | Open/GND | No test/test |
R | MAGVAR select | Open/GND |Reserved/expended model|
R | GPS sensor 1 present | Open/GND | GND = present |
R | GPS sensor 2 present | Open/GND | GND = present |
R | GPS priority select | Open/GND |Normal priority/ |
R | | |Reserved priority |
R ---------------------------------------------------------------------
R Table 1 : IR Discrete Inputs
R
EFF :
405-499, 34-14-00
Page 13
Config-2 Nov 01/08
TAI
R Table 2 below gives the unit position according to discrete
R selection.
R ---------------------------------------------------------------
R | Mounting | Mounting | Connector Position/Aircraft |
R | Position 1 | Position 2 | |
R ---------------------------------------------------------------
R | Open * | Open * | FWD * |
R | Ground | Open | AFT |
R | Open | Ground | RIGHT |
R | Ground | Ground | LEFT |
R ---------------------------------------------------------------
R Table 2 : Mounting Position Discretes
R ----------------------------------------------
R | M1 | M2 | OFF/NAV/ATT |
R | | | Selector Switch Position |
R |--------------------------------------------|
R | Open | Open | OFF |
R | Ground | Open | NAV |
R | Open | Ground | ATT |
R ----------------------------------------------
R Table 3 : IR Mode Select
R
EFF :
405-499, 34-14-00
Page 14
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
--------------------------------------------------------------------
| Auto | Manual | IR Selection |
| ADR DADS | ADR DADS | |
--------------------------------------------------------------------
| Open | Open | The IR uses the air data received |
| | | on port 1 |
|-------------|----------------|-----------------------------------|
| Open | Ground | The IR uses the air data received |
| | | on port 2 |
|-------------|----------------|-----------------------------------|
| Ground * | Open | The IR goes automatically from one|
| | | air data source to the others |
| | | according to their validity and |
| | | priority. * |
--------------------------------------------------------------------
Table 4 : ADR DADS Select
--------------------------------------------
| SDI-MSB | SDI-LSB | ADIRU NUMBER |
--------------------------------------------
| OPEN | GROUND | 1 |
| GROUND | OPEN | 2 |
| GROUND | GROUND | 3 |
--------------------------------------------
Table 5 : IR SDI Code
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 15
Config-2 Nov 01/08
TAI
**ON A/C 201-203,
---------------------------------------
| ADIRU | PRIMARY | SECONDARY |
| SDI | INPUT | INPUT |
---------------------------------------
| 1 | GPSSU 1 | GPSSU 2 |
| 2 | GPSSU 2 | GPSSU 1 |
| 3 | GPSSU 1 | GPSSU 2 |
---------------------------------------
R
EFF :
201-203, 34-14-00
Page 16
Config-2 Nov 01/08
TAI
---------------------------------------------------------------------
| PRIORITY | PRIMARY | SECONDARY | GPSSU SOURCE |
| STATUS | GPSSU | GPSSU |-----------------------------------
| | | | GPS PRIORITY | GPS PRIORITY |
| | | | SELECT = OPEN | SELECT = GROUND |
---------------------------------------------------------------------
| 1 | Valid | Valid | Primary | Secondary |
| 2 | Valid | Fail | Primary | Primary |
| 3 | Fail | Valid | Secondary | Secondary |
| 4 | Fail | Fail | Primary | Secondary |
---------------------------------------------------------------------
---------------------------------------------
| ADIRU | PRIMARY | SECONDARY |
| SDI | INPUT | INPUT |
---------------------------------------------
| 1 | GPSSU 1 (MMR 1) | GPSSU 2 (MMR 2) |
| 2 | GPSSU 2 (MMR 2) | GPSSU 1 (MMR 1) |
| 3 | GPSSU 1 (MMR 1) | GPSSU 2 (MMR 2) |
---------------------------------------------
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-14-00
Page 17
Config-2 Nov 01/08
TAI
Depending on the GPS validity and GPS priority select input
discrete status, the GPS source is defined as follows:
---------------------------------------------------------------------
| PRIORITY | PRIMARY | SECONDARY | GPSSU SOURCE |
| STATUS | GPSSU | GPSSU |-----------------------------------
| | | | GPS PRIORITY | GPS PRIORITY |
| | | | SELECT = OPEN | SELECT = GROUND |
---------------------------------------------------------------------
| 1 | Valid | Valid | Primary | Secondary |
| 2 | Valid | Fail | Primary | Primary |
| 3 | Fail | Valid | Secondary | Secondary |
| 4 | Fail | Fail | Primary | Secondary |
---------------------------------------------------------------------
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-14-00
Page 18
Config-2 Nov 01/08
TAI
---------------------------------------------
| ADIRU | PRIMARY | SECONDARY |
| SDI | INPUT | INPUT |
---------------------------------------------
| 1 | GPSSU 1 (MMR 1) | GPSSU 2 (MMR 2) |
| 2 | GPSSU 2 (MMR 2) | GPSSU 1 (MMR 1) |
| 3 | GPSSU 1 (MMR 1) | GPSSU 2 (MMR 2) |
---------------------------------------------
---------------------------------------------------------------------
| PRIORITY | PRIMARY | SECONDARY | GPSSU SOURCE |
| STATUS | GPSSU | GPSSU |-----------------------------------
| | | | GPS PRIORITY | GPS PRIORITY |
| | | | SELECT = OPEN | SELECT = GROUND |
---------------------------------------------------------------------
| 1 | Valid | Valid | Primary | Secondary |
| 2 | Valid | Fail | Primary | Primary |
| 3 | Fail | Valid | Secondary | Secondary |
| 4 | Fail | Fail | Primary | Secondary |
---------------------------------------------------------------------
C. Software Computation
(Ref. Fig. 001, 002)
The software contains the program memory and provides the following basic
functions:
- real-time executive
- attitude integration
- velocity integration
- position integration
- output computation
- built-in test (Ref. 34-18-00).
The IR software operates in one of three basic modes: alignment,
navigation, or a reversionary attitude mode. These modes include various
portions of the major functions. The real-time executive and built-in
test functions interface with each function in each mode.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 19
Config-2 Nov 01/08
TAI
ADIRU - IR Block Diagram
Figure 001
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page 20
Config-2 Nov 01/08
TAI
R ADIRU - IR Block Diagram
R Figure 001A
R
EFF :
405-499, 34-14-00
Page 21
Config-2 Nov 01/08
TAI
ADIRU - IR Signal Flow Diagram
Figure 002
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page 22
Config-2 Nov 01/08
TAI
The IR alignment mode is divided into three parts:
- coarse level processing
The coarse level processing is engaged during the first 30 seconds
of the IR alignment mode. This processing estimates the local
vertical using the three accelerometers and the measured gravity.
During coarse level processing of the alignment mode, the software
computes the level coordinate frame, pitch and roll, and associated
rates and accelerations.
- gyro-compass (or azimuth) processing and level processing
Gyro-compass processing is engaged after the 30 seconds of the IR
alignment mode (coarse level complete) and runs for a minimum of
9.5 minutes.
Gyro-compass processing is used to orient body frame to North
(using earth rotation detection by gyros).
During this alignment submode, an estimated latitude is computed
using local vertical component of the earth rotation.
During this submode, the results of the coarse level processing are
sharpened to have a better knowledge of the coordinate frame.
R C. Software Computation
R (Ref. Fig. 001A, 002A)
R The software contains the program memory and provides the following basic
R functions:
R - real-time executive
R - attitude integration
R - velocity integration
R - position integration
R - output computation
R - built-in test (Ref. 34-18-00).
R The IR software operates in one of three basic modes: alignment,
R navigation, or a reversionary attitude mode. These modes include various
R portions of the major functions. The real-time executive and built-in
R test functions interface with each function in each mode.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 23
Config-2 Nov 01/08
TAI
R ADIRU - IR Signal Flow Diagram
R Figure 002A
R
EFF :
405-499, 34-14-00
Page 24
Config-2 Nov 01/08
TAI
R During coarse level processing of the alignment mode, the software
R computes the level coordinate frame, pitch and roll, and associated
R rates and accelerations.
R - gyro-compass (or azimuth) processing and level processing
R Gyro-compass processing is engaged after the 30 seconds of the IR
R alignment mode (coarse level complete) and run for a minimum of 5
R minutes. The ADIRU alignment time will be reduced from 10 minutes
R fixed alignment time to a variable time based on aircraft latitude.
R Gyro-compass processing is used to orient body frame to North
R (using earth rotation detection by gyros).
R During this alignment submode, an estimated latitude is computed
R using local vertical component of the earth rotation.
R During this submode, the results of the coarse level processing are
R sharpened to have a better knowledge of the coordinate frame.
Abs val( lat entered - lat recorded ) less than or equal to 1 deg.
Abs val( long entered - long recorded ) less than or equal to 1 deg
(Ref. 34-18-00).
Abs val(cos (lat est) - cos (lat ent)) less than or equal to
0.01234.
Abs val(sin (lat est) - sin (lat ent)) less than or equal to
0.01234.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 25
Config-2 Nov 01/08
TAI
The operations to enter position and the warnings associated to the
tests performed in alignment mode are described in para. 3
(operation/control and indicating).
The IR also offers the possibility to enter into a variant of the
alignment mode called rapid realign or 30-second realign. This
mode is selected by moving the CDU selector switch from NAV to OFF,
then to NAV within five seconds, when the aircraft is on ground
(ground speed less than 20 knots). Valid position data must be
received. During the rapid realign mode, all computed velocities
are set to zero and a fine tuning of the alignment is performed
using the attitude reference vertical and the heading data
available from the last NAV phase as initial conditions.
During the alignment mode, the IR outputs on the ARINC 429 bus may
not be available. Position initialization of the ADIRU is
transmitted to the MMR for its own initialization. In addition to
this position, the MMR requires initialization data of date and
UTC. The IR portion receives date and UTC from the CMC and
transmits the data to the MMRs. The chronology of the validation
of the outputs during the alignment is given in para. 2-D (IR
output data).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page 26
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R
EFF :
405-499, 34-14-00
Page 27
Config-2 Nov 01/08
TAI
R ADIRU - Alignment Time in North Hemisphere
R Figure 003
R
EFF :
405-499, 34-14-00
Page 28
Config-2 Nov 01/08
TAI
R The operations to enter position and the warnings associated to the
R tests performed in alignment mode are described in para. 3
R (operation/control and indicating).
R The IR also offers the possibility to enter into a variant of the
R alignment mode called rapid realign or 30-second realign. This
R mode is selected by moving the MSU selector switch from NAV to OFF,
R then to NAV within five seconds, when the aircraft is on ground
R (ground speed less than 20 knots). Valid position data must be
R received. During the rapid realign mode, all computed velocities
R are set to zero and a fine tuning of the alignment is performed
R using the attitude reference vertical and the heading data
R available from the last NAV phase as initial conditions.
R During the alignment mode, the IR outputs on the ARINC 429 bus may
R not be available. Position initialization of the ADIRU is
R transmitted to the MMR for its own initialization. In addition to
R this position, the MMR requires initialization data of date and
R UTC. The IR portion receives date and UTC from the CMC and
R transmits the data to the MMRs. The chronology of the validation
R of the outputs during the alignment is given in para. 2-D (IR
R output data).
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-499,
34-14-00
Page 29
Config-2 Nov 01/08
TAI
ADIRU - Navigation Mode Functions
R Figure 004
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 30
Config-2 Nov 01/08
TAI
Pitch Att rate = Q. cos (Ra) - R. sin (Ra)
Q. sin (Ra) + R. cos (Ra)
Roll Att rate = P + -------------------------
cos (Pa)/sin (Pa)
where : Ra = Roll angle
Pa = Pitch angle
P = Body roll rate
Q = Body pitch rate
R = Body yaw rate
- flight path angle (label 322) = angle between the aircraft velocity
vector and the horizontal plane
(VZ)
FPA = Arc tan (--)
(VG)
where : VZ = inertial vertical speed (label 365)
VG = ground speed (label 312)
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-14-00
Page 31
Config-2 Nov 01/08
TAI
- flight path acceleration (label 323) = aircraft acceleration along
the total velocity vector
Vx.Ax + Vy.Ay + Vz.Az
Flt Path Accel = ---------------------
______________
/ 2 2 2
V Vx + Vy + Vz
where : Ax, Ay, Az, Vx, Vy, Vz: accelerations and velocities in the
earth frame.
The TAS is received from the ADR. The ADR source to be used is
selected according to the configuration of the discretes described
in para. 2.B.(3)(d). The IR does not compute the wind if the TAS is
less than 100 knots or if the air data sources are no more
available. In this case, the wind labels are sent with their status
matrix coded NCD (No Computed Data).
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-14-00
Page 32
Config-2 Nov 01/08
TAI
IR - Baro Inertial Altitude Filter
R Figure 005
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 33
Config-2 Nov 01/08
TAI
The ADR source to be used is selected according to the
configuration of the discretes described in para. 2.B.(3)(d). When
no ADR source is available, the labels 361 and 365 are sent with
their status matrix coded NCD (No Computed Data).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 34
Config-2 Nov 01/08
TAI
Pitch Att rate = Q. cos (Ra) - R. sin (Ra)
Q. sin (Ra) + R. cos (Ra)
Roll Att rate = P + -------------------------
cos (Pa)/sin (Pa)
where : Ra = Roll angle
Pa = Pitch angle
P = Body roll rate
Q = Body pitch rate
R = Body yaw rate
- flight path angle (label 322) = angle between the aircraft velocity
vector and the horizontal plane
(VZ)
FPA = Arc tan (--)
(VG)
where : VZ = inertial vertical speed (label 365)
VG = ground speed (label 312)
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 35
Config-2 Nov 01/08
TAI
- flight path acceleration (label 323) = aircraft acceleration along
the total velocity vector
Vx.Ax + Vy.Ay + Vz.Az
Flt Path Accel = ---------------------
______________
/ 2 2 2
V Vx + Vy + Vz
where : Ax, Ay, Az, Vx, Vy, Vz: accelerations and velocities in the
earth frame.
The TAS is received from the ADR. The ADR source to be used is
selected according to the configuration of the discretes described
in para. 2.B.(3)(d). The IR does not compute the wind if the TAS is
less than 100 knots or if the air data sources are no more
available. In this case, the wind labels are sent with their status
matrix coded NCD (No Computed Data).
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 36
Config-2 Nov 01/08
TAI
no ADR source is available, the labels 361 and 365 are sent with
their status matrix coded NCD (No Computed Data).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 37
Config-2 Nov 01/08
TAI
This mode needs a 20-second initialization phase with the aircraft in
level flight. During this phase, all the ARINC bus outputs are sent
with their status matrix coded NCD (No Computed Data). At the end of
the initialization phase the IR sends valid outputs of:
- body axis accelerations and angular rates
- pitch and roll attitude and rate
- vertical acceleration
- vertical velocity
- baro-inertial altitude and vertical speed (Ref. para. D - IR output
data, list of valid labels).
The magnetic heading may also be valid if an initialization value
has been sent by the FMGC (through the MCDU) or the CDU. (Ref.
para. D - IR output data for the complete list of valid outputs).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 38
Config-2 Nov 01/08
TAI
R Monitor (RAIM) algorithm. In addition to determining the validity of
R the solution, the RAIM function also performs satellite failure
R detection and isolation so erroneous satellite measurements can be
R removed from the navigation solution. The integrity limit for the
R hybrid solution is computed from either the MMR autonomous or
R integrity monitor based data and provided as output.
R In contrast to the hybrid solution, the autonomous solution is
R provided by each MMR via the GPS ARINC input buses. The autonomous
R data from one MMR is then relayed and retransmitted on the output
R buses. Also, predictive RAIM labels can be received from the MMR, and
R relayed to the output functions for retransmission.
R The GPS partition remains operating in the Navigation mode unless the
R hybrid filter must be restarted or less than four unique satellites
R are being used by the filter - the hybrid filter is restarted if the
R IR partition transitions to a mode other than NAV after transitioning
R to NAV, and also if True Heading or position data from the IR
R partition becomes invalid prior to the IR partition transitioning to
R NAV. This restart condition will then initiate a transition back to
R the Acquisition mode of operation. Also when less than four
R satellites are being used by the filter, the GPS partition
R transitions to the Altitude Aiding/Clock Coasting mode. However, the
R software performs the same operational tasks as performed in the GPS
R Navigation mode, except for the mode indication in the GPIRS status
R word of the outputs. It remains in this mode until four or more
R satellite measurements are received again when its transitioned back
R to the Navigation mode.
D. IR Output Data
R
EFF :
201-203, 405-499, 34-14-00
Page 39
Config-2 Nov 01/08
TAI
- BITS : number of bits used by the parameter in the label
- XMSN/INTV : output transmission interval. The refresh rate is given
in milliseconds.
- CODE:
BNR: binary data word
BCD: binary coded decimal data word
ISO: data word coded in ISO5 code
DIS: discrete data word
HEX: hexadecimal coded
HYB: mixed code.
- ALPHA CODE: indicates the parameter mnemonic code
- SOURCE ORIGIN: parameter source computer or system.
When the input discretes of THE GPS PRESENT programming pins are
grounded (indicating GPS present), both the GPSSU outputs and the
GPIRS integrated navigation solution outputs are transmitted on the
IR output buses with the IR output data.
R
EFF :
201-203, 34-14-00
Page 40
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 010 |PPOS LAT |W |Deg | | 6 |500 |BCD |LATP | |
| | |90S-90N |& | | | | | | |
| | |0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 011 |PPOS LONG |W |Deg | | 6 |500 |BCD | | |
| | |180E-180W |& | | | | | | |
| | |0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 012 |GROUND |W 0 to 2000 |Kts | | 4 |500 |BCD | GS | |
| |SPEED |0 to 1000 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 013 |TRK ANGLE |W 0 to 359.9|Deg | | 4 |500 |BCD | | |
| |TRUE |R 0.1 | | | | | | | |
| | |+/- 2.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 014 |MAG HDG |W 0 to 359.9|Deg | | 4 |500 |BCD | MH | |
| | |R 0.1 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 015 |WIND SPEED|W 0 to 256 |Kts | | 3 |500 |BCD | WS | |
| | |R 1 | | | | | | | |
| | |+/- 9 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 016 |WIND DIR |W 0 to 359 |Deg | | 3 |500 |BCD | WD | |
| |TRUE |R 1 | | | | | | | |
| | |+/- 10 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 041 |SET LAT |W +/- 180 |Deg | | 6 |500 |BCD | | |
| | |90S-90N |& | | | | | | |
| | |R 0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 042 |SET LONG |W +/- 180 |Deg | | 6 |500 |BCD | | |
| | |R 0.1 |& | | | | | | |
| | | |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 043 |SET MAG |W 0 to 359.9|Deg | | 4 |500 |BCD | | |
R
EFF :
201-203, 34-14-00
Page 41
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |HDG |R 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 044 |TRUE HDG |W 0 to 359.9|Deg | | 4 |500 |BCD |THDG | |
| | |R 0.1 | | | | | | | |
| | |+/- 0.4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 052 |PITCH |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 053 |ROLL |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 054 |YAW |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 310 |PPOS LAT |W +/- 180 |Deg | 29 | 20 |200 |BNR | | |
| | |+/- 90 |& | | | | | | |
| | |R 0.00017 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 311 |PPOS LONG |W +/- 180 |Deg | 29 | 20 |200 |BNR |LONP | |
| | |R 0.00017 |& | | | | | | |
| | | |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 312 |GROUND |W 0 to 4096 |Kts | | 15 | 40 |BNR | | |
| |SPEED |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 313 |TRK - TRUE|W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.23 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 314 |TRUE HDG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
201-203, 34-14-00
Page 42
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 315 |WIND |W 0 to 256 |Kts | | 15 |100 |BNR | | |
| |SPEED |0 to 100 | | | | | | | |
| | |R 0.0078 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 316 |WIND DIR |W +/- 180 |Deg | 29 | 15 |100 |BNR | | |
| |- TRUE |+/- 180 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 10 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 317 |TRK - MAG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 320 |MAG HDG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |82 N to 60 S| | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 321 |DRIFT |W +/- 180 |Deg | 29 | 15 | 40 |BNR | DA | |
| |ANGLE |+/- 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 2.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 322 |FLIGHT |W +/- 180 |Deg | 29 | 15 | 40 |BNR | FPA | |
| |PATH |+/- 90 | | | | | | | |
| |ANGLE |R 0.0055 | | | | | | | |
| | |+/- 0.28 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 323 |FLT PATH |W +/- 4 | g | 29 | 15 | 20 |BNR |FPAC | |
| |ACCEL |R 0.0001 | | | | | | | |
| | |+/- 10 % of | | | | | | | |
| | |outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 324 |PITCH |W +/- 180 |Deg | 29 | 15 | 20 |BNR |PTCH | |
| |ANGLE |-90 to + 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.05 | | | | | | | |
R
EFF :
201-203, 34-14-00
Page 43
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 325 |ROLL |W +/- 180 |Deg | 29 | 15 | 20 |BNR |ROLL | |
| |ANGLE |-90 to + 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.05 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 326 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |PTCR | |
| |PITCH RATE|+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 327 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |ROLR | |
| |ROLL RATE |+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 330 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |YAW | |
| |YAW RATE |+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 331 |BODY LONG |W +/- 4 | g | 29 | 15 | 20 |BNR |LONG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 332 |BODY LAT |W +/- 4 | g | 29 | 15 | 20 |BNR |LATG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 333 |BODY NORM |W +/- 4 | g | 29 | 15 | 20 |BNR |VRTG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 334 |PLATFORM |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| |HEADING |R 0.0055 | | | | | | | |
R
EFF :
201-203, 34-14-00
Page 44
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |+/- 0.23 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 335 |TRK ANGLE |W +/- 32 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.001 |s | | | | | | |
| | |+/- 0.17 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 336 |PITCH ATT |W +/- 128 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.0039 |s | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 337 |ROLL ATT |W +/- 128 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.0039 |s | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 340 |TRACK |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| |ANGLE |R 0.0055 | | | | | | | |
| |GRID |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 341 |GRID |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| |HEADING |R 0.0055 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 360 |POTENTIAL |W +/- 32768 |ft /| 29 | 15 | 20 |BNR | | |
| |V/S |R 1.0 | min| | | | | | |
| | |+/- 30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 361 |INERTIAL |W +/- 131072|ft | 29 | 20 | 40 |BNR | | |
| |ALT |R 0.125 | | | | | | | |
| | |+/- 5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 362 |ALONG TRK |W +/- 4 | g | 29 | 15 | 20 |BNR | | |
| |HORIZ |R 0.00012 | | | | | | | |
| |ACCEL |+/- 10 % | | | | | | | |
| | |of outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 363 |CROSS TRK |W +/- 4 | g | 29 | 15 | 20 |BNR | | |
| |HORIZ |R 0.00012 | | | | | | | |
| |ACCEL |+/- 10 % | | | | | | | |
R
EFF :
201-203, 34-14-00
Page 45
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |of outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 364 |VERTICAL |W +/- 4 | g | 29 | 15 | 20 |BNR |VACC | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.00012 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 365 |INERTIAL |W +/- 32768 |ft /| 29 | 15 | 20 |BNR |IVV | |
| |V/S |R 1.0 |min | | | | | | |
| | |+/- 30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 366 |N - S |W +/- 4096 |Kts | 29 | 15 |100 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 367 |E - W |W +/- 4096 |Kts | 29 | 15 |100 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 270 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 275 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 2 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 276 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 3 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 277 |IRS TEST | | | | |500 |HYB | | |
| |WORD | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 350 |ACTION | | | | |500 |HYB | | |
| |CODE | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 351 |IR MAINT | | | | |500 |DIS | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 354 |LRU IDENT | | | | | |ISO | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
201-203, 34-14-00
Page 46
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 356 |FAULT | | | | | |ISO | | |
| |STAT | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 377 |EQUIP | | | | |500 |HEX | | |
| |IDENT | | | | | | | | |
|-----------------------------------------------------------------------------|
D. IR Output Data
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-14-00
Page 47
Config-2 Nov 01/08
TAI
- SOURCE ORIGIN: parameter source computer or system.
When the input discretes of THE GPS PRESENT programming pins are
grounded (indicating GPS present), both the GPSSU outputs and the
GPIRS integrated navigation solution outputs are transmitted on the
IR output buses with the IR output data.
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 48
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 010 |PPOS LAT |W |Deg | | 6 |500 |BCD |LATP | |
| | |90S-90N |& | | | | | | |
| | |0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 011 |PPOS LONG |W |Deg | | 6 |500 |BCD | | |
| | |180E-180W |& | | | | | | |
| | |0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 012 |GROUND |W 0 to 2000 |Kts | | 4 |500 |BCD | GS | |
| |SPEED |0 to 1000 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 013 |TRK ANGLE |W 0 to 359.9|Deg | | 4 |500 |BCD | | |
| |TRUE |R 0.1 | | | | | | | |
| | |+/- 2.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 014 |MAG HDG |W 0 to 359.9|Deg | | 4 |500 |BCD | MH | |
| | |R 0.1 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 015 |WIND SPEED|W 0 to 256 |Kts | | 3 |500 |BCD | WS | |
| | |R 1 | | | | | | | |
| | |+/- 9 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 016 |WIND DIR |W 0 to 359 |Deg | | 3 |500 |BCD | WD | |
| |TRUE |R 1 | | | | | | | |
| | |+/- 10 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 041 |SET LAT |W +/- 180 |Deg | | 6 |500 |BCD | | |
| | |90S-90N |& | | | | | | |
| | |R 0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 042 |SET LONG |W +/- 180 |Deg | | 6 |500 |BCD | | |
| | |R 0.1 |& | | | | | | |
| | | |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 043 |SET MAG |W 0 to 359.9|Deg | | 4 |500 |BCD | | |
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 49
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |HDG |R 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 044 |TRUE HDG |W 0 to 359.9|Deg | | 4 |500 |BCD |THDG | |
| | |R 0.1 | | | | | | | |
| | |+/- 0.4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 052 |PITCH |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 053 |ROLL |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 054 |YAW |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 310 |PPOS LAT |W +/- 180 |Deg | 29 | 20 |200 |BNR | | |
| | |+/- 90 |& | | | | | | |
| | |R 0.00017 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 311 |PPOS LONG |W +/- 180 |Deg | 29 | 20 |200 |BNR |LONP | |
| | |R 0.00017 |& | | | | | | |
| | | |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 312 |GROUND |W 0 to 4096 |Kts | | 15 | 40 |BNR | | |
| |SPEED |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 313 |TRK - TRUE|W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.23 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 314 |TRUE HDG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 50
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 315 |WIND |W 0 to 256 |Kts | | 15 |100 |BNR | | |
| |SPEED |0 to 100 | | | | | | | |
| | |R 0.0078 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 316 |WIND DIR |W +/- 180 |Deg | 29 | 15 |100 |BNR | | |
| |- TRUE |+/- 180 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 10 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 317 |TRK - MAG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 320 |MAG HDG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |82 N to 60 S| | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 321 |DRIFT |W +/- 180 |Deg | 29 | 15 | 40 |BNR | DA | |
| |ANGLE |+/- 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 2.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 322 |FLIGHT |W +/- 180 |Deg | 29 | 15 | 40 |BNR | FPA | |
| |PATH |+/- 90 | | | | | | | |
| |ANGLE |R 0.0055 | | | | | | | |
| | |+/- 0.28 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 323 |FLT PATH |W +/- 4 | g | 29 | 15 | 20 |BNR |FPAC | |
| |ACCEL |R 0.0001 | | | | | | | |
| | |+/- 10 % of | | | | | | | |
| | |outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 324 |PITCH |W +/- 180 |Deg | 29 | 15 | 20 |BNR |PTCH | |
| |ANGLE |-90 to + 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.05 | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 51
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 325 |ROLL |W +/- 180 |Deg | 29 | 15 | 20 |BNR |ROLL | |
| |ANGLE |-90 to + 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.05 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 326 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |PTCR | |
| |PITCH RATE|+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 327 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |ROLR | |
| |ROLL RATE |+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 330 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |YAW | |
| |YAW RATE |+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 331 |BODY LONG |W +/- 4 | g | 29 | 15 | 20 |BNR |LONG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 332 |BODY LAT |W +/- 4 | g | 29 | 15 | 20 |BNR |LATG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 333 |BODY NORM |W +/- 4 | g | 29 | 15 | 20 |BNR |VRTG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 334 |PLATFORM |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| |HEADING |R 0.0055 | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 52
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |+/- 0.23 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 335 |TRK ANGLE |W +/- 32 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.001 |s | | | | | | |
| | |+/- 0.17 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 336 |PITCH ATT |W +/- 128 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.0039 |s | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 337 |ROLL ATT |W +/- 128 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.0039 |s | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 340 |TRACK |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| |ANGLE |R 0.0055 | | | | | | | |
| |GRID |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 341 |GRID |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| |HEADING |R 0.0055 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 360 |POTENTIAL |W +/- 32768 |ft /| 29 | 15 | 20 |BNR | | |
| |V/S |R 1.0 | min| | | | | | |
| | |+/- 30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 361 |INERTIAL |W +/- 131072|ft | 29 | 20 | 40 |BNR | | |
| |ALT |R 0.125 | | | | | | | |
| | |+/- 5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 362 |ALONG TRK |W +/- 4 | g | 29 | 15 | 20 |BNR | | |
| |HORIZ |R 0.00012 | | | | | | | |
| |ACCEL |+/- 10 % | | | | | | | |
| | |of outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 363 |CROSS TRK |W +/- 4 | g | 29 | 15 | 20 |BNR | | |
| |HORIZ |R 0.00012 | | | | | | | |
| |ACCEL |+/- 10 % | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 53
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |of outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 364 |VERTICAL |W +/- 4 | g | 29 | 15 | 20 |BNR |VACC | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.00012 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 365 |INERTIAL |W +/- 32768 |ft /| 29 | 15 | 20 |BNR |IVV | |
| |V/S |R 1.0 |min | | | | | | |
| | |+/- 30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 366 |N - S |W +/- 4096 |Kts | 29 | 15 |100 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 367 |E - W |W +/- 4096 |Kts | 29 | 15 |100 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 270 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 275 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 2 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 276 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 3 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 277 |IRS TEST | | | | |500 |HYB | | |
| |WORD | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 350 |ACTION | | | | |500 |HYB | | |
| |CODE | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 351 |IR MAINT | | | | |500 |DIS | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 354 |LRU IDENT | | | | | |ISO | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 54
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 356 |FAULT | | | | | |ISO | | |
| |STAT | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 377 |EQUIP | | | | |500 |HEX | | |
| |IDENT | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 076 |GPS ALT |W +/- 131072|ft | | 20 |666 |BNR | | |
| |(MLS) |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 101 |HDOP |W 0 to 1024 | | | 15 |666 |BNR | | |
| | |R 0.031 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 102 |VDOP |W 0 to 1024 | | | 15 |666 |BNR | | |
| | |R 0.031 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 103 |GPS TRACK |W +/- 180 |DEG | | 15 |666 |BNR | | |
| |ANGLE TRUE|R 0.0055 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 110 |GPS PRES |W +/- 90 |DEG | | 20 |666 |BNR | | |
| |POS-LAT |R 0.000172 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 111 |GPS PRES |W +/- 180 |DEG | | 20 |666 |BNR | | |
| |POS-LONG |R 0.000172 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 112 |GPS GROUND|W 0 to 4096 |KTS | | 15 |666 |BNR | | |
| |SPEED |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 120 |GPS PRES |W +/- |DEG | | 11 |666 |BNR | | |
| |POS-LAT |0.000172 | | | | | | | |
| |FINE |R 8.38 E-8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 121 |GPS PRES |W +/- |DEG | | 11 |666 |BNR | | |
| |POS-LONG |0.000172 | | | | | | | |
| |FINE |R 8.38 E-8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 125 |GPS UTC |W 23:59.9 |H/ | | 5 |666 |BCD | | |
| | |R 0.1 min |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 55
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 130 |GPS INTEG |W 0 to 16 |NM | | 18 |666 |BNR | | |
| |LIMIT |R 1.2 E-4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 131 |HYB INTEG |W 0 to 16 |NM | | 18 |666 |BNR | | |
| |LIMIT |R 6.1 E-5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 132 |HYB TRUE |W +/- 180 |DEG | | 15 | 40|BNR | | |
| |HEADING |R 0.0055 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 135 |HYB VERT |W 0 to 32768|ft | | 18 |666 |BNR | | |
| |FOM |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 136 |GPS VERT |W 0 to 32768|ft | | 18 |666 |BNR | | |
| |FOM |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 137 |HYB TRACK |W +/- 180 |DEG | | 15 | 40|BNR | | |
| |ANGLE TRUE|R 0.0055 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 143 |TERMINAL |W 0 to 16 |NM | | 17 |666 |BNR | | |
| |AREA HIL |R 1.22 E-4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 150 |GPS UTC |W 23:59:59 |H:M | | 17 |666 |BNR | | |
| | |R 1.0 |:S | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 162 |DESTINA- |W 23:59 |H:M | | 11 |333 |BNR | | |
| |TION ETA |R 1 |M | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 163 |ALT |W 23:59 |H:M | | 11 |333 |BNR | | |
| |WAYPOINT |R 1 |M | | | | | | |
| |ETA | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 165 |GPS VERT |W +/- 32768 |ft/ | | 15 |666 |BNR | | |
| |SPEED |R 1.0 |mn | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 166 |GPS N/S |W +/- 4096 |kts | | 15 |666 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 174 |GPS E/W |W +/- 4096 |kts | | 15 |666 |BNR | | |
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 56
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |VELOCITY |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 175 |HYB GROUND|W 0 TO 4096 |kts | | 15 | 40|BNR | | |
| |SPEED |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 247 |GPS HORIZ |W 0 TO 16 |NM | | 18 |666 |BNR | | |
| |FOM |R 6.1 E-5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 254 |HYB LAT |W +/- 90 |DEG | | 20 |80 |BNR | | |
| | |R 0.000172 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 255 |HYB LONG |W +/- 180 |DEG | | 20 |80 |BNR | | |
| | |R 0.000172 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 256 |HYB LAT |W 0.000172 |DEG | | 11 |80 |BNR | | |
| |FINE |R 8.38 E-8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 257 |HYB LONG |W 0.000172 |DEG | | 11 |80 |BNR | | |
| |FINE |R 8.38 E-8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 260 |GPS DATE |W 31:12:99 |D:M | | 6 |666 |BCD | | |
| | |R 1 |:D | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 261 |HYB ALT |W +/- 131072|ft | | 20 | 40|BNR | | |
| |(MSL) |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 263 |HYB FLIGHT|W +/- 90 |DEG | | 12 | 40|BNR | | |
| |PATH ANGLE|R 0.044 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 264 |HYB HORIZ |W 0 to 16 |NM | | 18 |666 |BNR | | |
| |FOM |R 6.1 E-S | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 266 |HYB N/S |W 0 TO 4096 |kts | | 15 |80 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 267 |HYB E/W |W 0 TO 4096 |kts | | 15 |80 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 57
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 273 |GPS SENSOR| N/A | | | |666 |DIS | | |
| |STATUS | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 274 |GPIRS | | | | |666 |DIS | | |
| |SENSOR | N/A | | | | | | | |
| |STATUS | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 343 |DESTINA- |W 0 to 16 |NM | | 13 |333 |BNR | | |
| |TION HIL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 345 |HYB VERT |W +/- 32768 |ft/ | | 15 | 40|BNR | | |
| |VELOCITY |R 1.0 |mn | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 347 |ALT |W 0 to 16 |NM | | 13 | 333|BNR | | |
| |WAYPOINT | | | | | | | | |
| |HIL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 352 |GPSSU RCVR| N/A | | | |666 |DIS | | |
| |MAINT | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 353 |GPIRS | N/A | | | |666 |DIS | | |
| |MAINT WORD| | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 355 |GPSSU NAV | N/A | | | |666 |DIS | | |
| |MAINT | | | | | | | | |
-------------------------------------------------------------------------------
Table 7A :IR Digital Output Characteristics
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 58
Config-2 Nov 01/08
TAI
R **ON A/C 231-299, 314-399, 405-499,
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 59
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 010 |PPOS LAT |W |Deg | | 6 |500 |BCD |LATP | |
| | |90S-90N |& | | | | | | |
| | |0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 011 |PPOS LONG |W |Deg | | 6 |500 |BCD | | |
| | |180E-180W |& | | | | | | |
| | |0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 012 |GROUND |W 0 to 2000 |Kts | | 4 |500 |BCD | GS | |
| |SPEED |0 to 1000 | | | | | | | |
| | |R 1 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 013 |TRK ANGLE |W 0 to 359.9|Deg | | 4 |500 |BCD | | |
| |TRUE |R 0.1 | | | | | | | |
| | |+/- 2.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 014 |MAG HDG |W 0 to 359.9|Deg | | 4 |500 |BCD | MH | |
| | |R 0.1 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 015 |WIND SPEED|W 0 to 256 |Kts | | 3 |500 |BCD | WS | |
| | |R 1 | | | | | | | |
| | |+/- 9 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 016 |WIND DIR |W 0 to 359 |Deg | | 3 |500 |BCD | WD | |
| |TRUE |R 1 | | | | | | | |
| | |+/- 10 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 041 |SET LAT |W +/- 180 |Deg | | 6 |500 |BCD | | |
| | |90S-90N |& | | | | | | |
| | |R 0.1 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 042 |SET LONG |W +/- 180 |Deg | | 6 |500 |BCD | | |
| | |R 0.1 |& | | | | | | |
| | | |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 043 |SET MAG |W 0 to 359.9|Deg | | 4 |500 |BCD | | |
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 60
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |HDG |R 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 044 |TRUE HDG |W 0 to 359.9|Deg | | 4 |500 |BCD |THDG | |
| | |R 0.1 | | | | | | | |
| | |+/- 0.4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 052 |PITCH |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 053 |ROLL |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 054 |YAW |W +/- 64 |Deg/| | 15 | 20 |BNR | | |
| |ANGULAR |R 0.002 |sec2| | | | | | |
| |ACCEL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 310 |PPOS LAT |W +/- 180 |Deg | 29 | 20 |200 |BNR | | |
| | |+/- 90 |& | | | | | | |
| | |R 0.00017 |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 311 |PPOS LONG |W +/- 180 |Deg | 29 | 20 |200 |BNR |LONP | |
| | |R 0.00017 |& | | | | | | |
| | | |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 312 |GROUND |W 0 to 4096 |Kts | | 15 | 40 |BNR | | |
| |SPEED |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 313 |TRK - TRUE|W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.23 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 314 |TRUE HDG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 61
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 315 |WIND |W 0 to 256 |Kts | | 15 |100 |BNR | | |
| |SPEED |0 to 100 | | | | | | | |
| | |R 0.0078 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 316 |WIND DIR |W +/- 180 |Deg | 29 | 15 |100 |BNR | | |
| |- TRUE |+/- 180 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 10 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 317 |TRK - MAG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 320 |MAG HDG |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| | |82 N to 60 S| | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 321 |DRIFT |W +/- 180 |Deg | 29 | 15 | 40 |BNR | DA | |
| |ANGLE |+/- 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 2.3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 322 |FLIGHT |W +/- 180 |Deg | 29 | 15 | 40 |BNR | FPA | |
| |PATH |+/- 90 | | | | | | | |
| |ANGLE |R 0.0055 | | | | | | | |
| | |+/- 0.28 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 323 |FLT PATH |W +/- 4 | g | 29 | 15 | 20 |BNR |FPAC | |
| |ACCEL |R 0.0001 | | | | | | | |
| | |+/- 10 % of | | | | | | | |
| | |outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 324 |PITCH |W +/- 180 |Deg | 29 | 15 | 20 |BNR |PTCH | |
| |ANGLE |-90 to + 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.05 | | | | | | | |
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 62
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 325 |ROLL |W +/- 180 |Deg | 29 | 15 | 20 |BNR |ROLL | |
| |ANGLE |-90 to + 90 | | | | | | | |
| | |R 0.0055 | | | | | | | |
| | |+/- 0.05 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 326 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |PTCR | |
| |PITCH RATE|+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 327 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |ROLR | |
| |ROLL RATE |+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 330 |BODY AXIS |W +/- 128 |Deg/| 29 | 15 | 20 |BNR |YAW | |
| |YAW RATE |+/- 45 |s | | | | | | |
| | |R 0.0039 | | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 331 |BODY LONG |W +/- 4 | g | 29 | 15 | 20 |BNR |LONG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 332 |BODY LAT |W +/- 4 | g | 29 | 15 | 20 |BNR |LATG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 333 |BODY NORM |W +/- 4 | g | 29 | 15 | 20 |BNR |VRTG | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.0001 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 334 |PLATFORM |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| |HEADING |R 0.0055 | | | | | | | |
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 63
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |+/- 0.23 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 335 |TRK ANGLE |W +/- 32 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.001 |s | | | | | | |
| | |+/- 0.17 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 336 |PITCH ATT |W +/- 128 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.0039 |s | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 337 |ROLL ATT |W +/- 128 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0.0039 |s | | | | | | |
| | |+/- 0.1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 340 |TRACK |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| |ANGLE |R 0.0055 | | | | | | | |
| |GRID |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 341 |GRID |W +/- 180 |Deg | 29 | 15 | 40 |BNR | | |
| |HEADING |R 0.0055 | | | | | | | |
| | |+/- 3 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 360 |POTENTIAL |W +/- 32768 |ft /| 29 | 15 | 20 |BNR | | |
| |V/S |R 1.0 | min| | | | | | |
| | |+/- 30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 361 |INERTIAL |W +/- 131072|ft | 29 | 20 | 40 |BNR | | |
| |ALT |R 0.125 | | | | | | | |
| | |+/- 5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 362 |ALONG TRK |W +/- 4 | g | 29 | 15 | 20 |BNR | | |
| |HORIZ |R 0.00012 | | | | | | | |
| |ACCEL |+/- 10 % | | | | | | | |
| | |of outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 363 |CROSS TRK |W +/- 4 | g | 29 | 15 | 20 |BNR | | |
| |HORIZ |R 0.00012 | | | | | | | |
| |ACCEL |+/- 10 % | | | | | | | |
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 64
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |of outp | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 364 |VERTICAL |W +/- 4 | g | 29 | 15 | 20 |BNR |VACC | |
| |ACCEL |+/- 4.000 | | | | | | | |
| | |R 0.00012 | | | | | | | |
| | |+/- 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 365 |INERTIAL |W +/- 32768 |ft /| 29 | 15 | 20 |BNR |IVV | |
| |V/S |R 1.0 |min | | | | | | |
| | |+/- 30 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 366 |N - S |W +/- 4096 |Kts | 29 | 15 |100 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 367 |E - W |W +/- 4096 |Kts | 29 | 15 |100 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
| | |+/- 8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 270 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 275 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 2 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 276 |DSCRT DATA| | | | |500 |DIS | | |
| |WORD 3 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 277 |IRS TEST | | | | |500 |HYB | | |
| |WORD | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 350 |ACTION | | | | |500 |HYB | | |
| |CODE | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 351 |IR MAINT | | | | |500 |DIS | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 354 |LRU IDENT | | | | | |ISO | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 65
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 356 |FAULT | | | | | |ISO | | |
| |STAT | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 377 |EQUIP | | | | |500 |HEX | | |
| |IDENT | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 242 |BODY PITCH|W +/-128 |Deg/| 29 | 15 | 20 |BNR |PTCR | |
| |RATE |+/-128 |s | | | | | | |
| |(unfiltrd)|R 0,0039 | | | | | | | |
| | |+/- 0,1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 342 |BODY ROLL |W +/-128 |Deg/| 29 | 15 | 20 |BNR |ROLR | |
| |RATE |+/-45 |s | | | | | | |
| |(unfiltrd)|R 0,0039 | | | | | | | |
| | |+/- 0,1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 344 |BODY YAW |W +/-128 |Deg/| 29 | 15 | 20 |BNR | YAW | |
| |RATE |+/- 45 |s | | | | | | |
| |(unfiltrd)|R 0,0039 | | | | | | | |
| | |+/- 0,1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 346 |PITCH ATT |W +/-128 |Deg/| 29 | 15 | 20 |BNR | | |
| |RATE |R 0,0039 |s | | | | | | |
| |(unfiltrd)|+/- 0,1 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 173 |PITCH |W +/-180 |Deg | 29 | 15 | 20 |BNR |PITCH| |
| |ANGLE |-90 to +90 | | | | | | | |
| |(unfiltrd)|R 0,0055 | | | | | | | |
| | |+/- 0,05 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 202 |ROLL |W +/-180 |Deg | 29 | 15 | 20 |BNR |ROLL | |
| |ANGLE |-90 to +90 | | | | | | | |
| |(unfiltrd)|R 0,0055 | | | | | | | |
| | |+/- 0,05 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 372 |BODY LONG |W +/- 4 | g | 29 | 15 | 20 |BNR |LONG | |
| |ACCEL |+/- 4,000 | | | | | | | |
| |(unfiltrd)|R 0,0001 | | | | | | | |
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 66
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | |+/- 0,01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 373 |BODY LAT |W +/- 4 | g | 29 | 15 | 20 |BNR |LATG | |
| |ACCEL |+/- 4,000 | | | | | | | |
| |(unfiltrd)|R 0,0001 | | | | | | | |
| | |+/- 0,01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 374 |BODY NORM |W +/- 4 | g | 29 | 15 | 20 |BNR |VRTG | |
| |ACCEL |+/- 4,000 | | | | | | | |
| |(unfiltrd)|R 0,0001 | | | | | | | |
| | |+/- 0,01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 076 |GPS ALT |W +/- 131072|ft | | 20 |666 |BNR | | |
| |(MLS) |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 101 |HDOP |W 0 to 1024 | | | 15 |666 |BNR | | |
| | |R 0.031 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 102 |VDOP |W 0 to 1024 | | | 15 |666 |BNR | | |
| | |R 0.031 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 103 |GPS TRACK |W +/- 180 |DEG | | 15 |666 |BNR | | |
| |ANGLE TRUE|R 0.0055 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 110 |GPS PRES |W +/- 90 |DEG | | 20 |666 |BNR | | |
| |POS-LAT |R 0.000172 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 111 |GPS PRES |W +/- 180 |DEG | | 20 |666 |BNR | | |
| |POS-LONG |R 0.000172 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 112 |GPS GROUND|W 0 to 4096 |KTS | | 15 |666 |BNR | | |
| |SPEED |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 120 |GPS PRES |W +/- |DEG | | 11 |666 |BNR | | |
| |POS-LAT |0.000172 | | | | | | | |
| |FINE |R 8.38 E-8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 121 |GPS PRES |W +/- |DEG | | 11 |666 |BNR | | |
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 67
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |POS-LONG |0.000172 | | | | | | | |
| |FINE |R 8.38 E-8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 125 |GPS UTC |W 23:59.9 |H/ | | 5 |666 |BCD | | |
| | |R 0.1 min |min | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 130 |GPS INTEG |W 0 to 16 |NM | | 18 |666 |BNR | | |
| |LIMIT |R 1.2 E-4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 131 |HYB INTEG |W 0 to 16 |NM | | 18 |666 |BNR | | |
| |LIMIT |R 6.1 E-5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 132 |HYB TRUE |W +/- 180 |DEG | | 15 | 40|BNR | | |
| |HEADING |R 0.0055 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 135 |HYB VERT |W 0 to 32768|ft | | 18 |666 |BNR | | |
| |FOM |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 136 |GPS VERT |W 0 to 32768|ft | | 18 |666 |BNR | | |
| |FOM |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 137 |HYB TRACK |W +/- 180 |DEG | | 15 | 40|BNR | | |
| |ANGLE TRUE|R 0.0055 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 143 |TERMINAL |W 0 to 16 |NM | | 17 |666 |BNR | | |
| |AREA HIL |R 1.22 E-4 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 150 |GPS UTC |W 23:59:59 |H:M | | 17 |666 |BNR | | |
| | |R 1.0 |:S | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 162 |DESTINA- |W 23:59 |H:M | | 11 |333 |BNR | | |
| |TION ETA |R 1 |M | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 163 |ALT |W 23:59 |H:M | | 11 |333 |BNR | | |
| |WAYPOINT |R 1 |M | | | | | | |
| |ETA | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 165 |GPS VERT |W +/- 32768 |ft/ | | 15 |666 |BNR | | |
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 68
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |SPEED |R 1.0 |mn | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 166 |GPS N/S |W +/- 4096 |kts | | 15 |666 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 174 |GPS E/W |W +/- 4096 |kts | | 15 |666 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 175 |HYB GROUND|W 0 TO 4096 |kts | | 15 | 40|BNR | | |
| |SPEED |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 247 |GPS HORIZ |W 0 TO 16 |NM | | 18 |666 |BNR | | |
| |FOM |R 6.1 E-5 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 254 |HYB LAT |W +/- 90 |DEG | | 20 |80 |BNR | | |
| | |R 0.000172 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 255 |HYB LONG |W +/- 180 |DEG | | 20 |80 |BNR | | |
| | |R 0.000172 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 256 |HYB LAT |W 0.000172 |DEG | | 11 |80 |BNR | | |
| |FINE |R 8.38 E-8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 257 |HYB LONG |W 0.000172 |DEG | | 11 |80 |BNR | | |
| |FINE |R 8.38 E-8 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 260 |GPS DATE |W 31:12:99 |D:M | | 6 |666 |BCD | | |
| | |R 1 |:D | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 261 |HYB ALT |W +/- 131072|ft | | 20 | 40|BNR | | |
| |(MSL) |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 263 |HYB FLIGHT|W +/- 90 |DEG | | 12 | 40|BNR | | |
| |PATH ANGLE|R 0.044 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 264 |HYB HORIZ |W 0 to 16 |NM | | 18 |666 |BNR | | |
| |FOM |R 6.1 E-S | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 69
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 266 |HYB N/S |W 0 TO 4096 |kts | | 15 |80 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 267 |HYB E/W |W 0 TO 4096 |kts | | 15 |80 |BNR | | |
| |VELOCITY |R 0.125 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 273 |GPS SENSOR| N/A | | | |666 |DIS | | |
| |STATUS | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 274 |GPIRS | | | | |666 |DIS | | |
| |SENSOR | N/A | | | | | | | |
| |STATUS | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 343 |DESTINA- |W 0 to 16 |NM | | 13 |333 |BNR | | |
| |TION HIL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 345 |HYB VERT |W +/- 32768 |ft/ | | 15 | 40|BNR | | |
| |VELOCITY |R 1.0 |mn | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 347 |ALT |W 0 to 16 |NM | | 13 | 333|BNR | | |
| |WAYPOINT | | | | | | | | |
| |HIL | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 352 |GPSSU RCVR| N/A | | | |666 |DIS | | |
| |MAINT | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 353 |GPIRS | N/A | | | |666 |DIS | | |
| |MAINT WORD| | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 355 |GPSSU NAV | N/A | | | |666 |DIS | | |
| |MAINT | | | | | | | | |
-------------------------------------------------------------------------------
Table 7A :IR Digital Output Characteristics
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 70
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-230, 301-313, 401-404,
----------------------------------------------------------------------------
| BIT | SIGNAL | 1 CONDITION |
|-----|--------------------|-----------------------------------------------|
| 1 | 1 - | |
| 2 | 0 | | |
| 3 | 1 | | |
| 4 | 1 | LABEL 270 | |
| 5 | 1 | | |
| 6 | 0 | | |
| 7 | 0 | | |
| 8 | 0 - | |
| 9 | SDI - LSB | |
| 10 | SDI - MSB | |
| 11 | Alignment Not Ready| In Align Submode |
| 12 | Rev Att Mode | In Attitude Mode |
| 13 | Nav Mode | In Nav Mode |
| 14 | Valid Set Heading | A valid set heading has to be input to the |
| | | IR. Magnetic heading outputs are no longer |
| | | being computed, but have the characteristics |
| | | of a Free Direction Gyro. |
| 15 | Attitude Invalid | Attitude Critical Fault |
| 16 | DC Fail | DC Power Less Than 18V |
| 17 | On DC | On DC Power |
| 18 | ADR Fault | The IR has detected an ADR input (TAS, ALT |
| | | and ALT RATE) as FW or NCD. Note functional |
| | | test data is ignored by the IR and last valid |
| | | input is used. |
| 19 | IR Failure | Navigation (Non Critical) Fault |
| 20 | DC Fail - On DC | The IR has detected that a DC fail occurred |
| | | while on DC from last turn on. |
| 21 | Align Fault | The IR has detected a position miscompare |
| | | or a Quality of Align fault. |
| 22 | No IR Initial | IR does not have position data or data |
| | | received is invalid. |
| 23 | Excess Motion Error| X or Y velocity greater than 0.011 ft/s |
| | | during align. |
| 24 | ADR/IR Fault | No data has been received from the ADR or |
| | | was received with a parity error. |
| 25 | Extreme Latitude | Latitude exceeds 73⁰N (+/-0.5⁰ hysteresis) |
| | | or Latitude exceeds 60⁰S (+/-0.5⁰ hysteresis).|
| | | Magnetic Deviation is set to zero. |
| 26 | Align Time Status | Bits 28 27 26 Time Until Nav |
| 27 | | 1 1 1 7 - 10 minutes |
| 28 | | 1 1 0 6 minutes |
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-14-00
Page 71
Config-2 Nov 01/08
TAI
----------------------------------------------------------------------------
| BIT | SIGNAL | 1 CONDITION |
|-----|--------------------|-----------------------------------------------|
| | | 1 0 1 5 minutes |
| | | 1 0 0 4 minutes |
| | | 0 1 1 3 minutes |
| | | 0 1 0 2 minutes |
| | | 0 0 1 1 minute |
| | | 0 0 0 IN NAV MODE ONLY |
| 29 | COMPUT LAT MISCOMP | SIN/COS OF LATITUDE TEST FAILED |
| 30 | SSM | |
| 31 | SSM | |
| 32 | Parity | |
----------------------------------------------------------------------------
Digital Word 270 (IR Discretes)
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-14-00
Page 72
Config-2 Nov 01/08
TAI
Digital Word 275 IR Discrete 2
R Figure 006
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 73
Config-2 Nov 01/08
TAI
Digital Word 276 IR Discrete 3
R Figure 007
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 74
Config-2 Nov 01/08
TAI
Digital Word 351 IR Maintenance
R Figure 008
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 75
Config-2 Nov 01/08
TAI
R **ON A/C 231-299, 314-399, 405-499,
----------------------------------------------------------------------------
| BIT | SIGNAL | 1 CONDITION |
|-----|--------------------|-----------------------------------------------|
| 1 | 1 - | |
| 2 | 0 | | |
| 3 | 1 | | |
| 4 | 1 | LABEL 270 | |
| 5 | 1 | | |
| 6 | 0 | | |
| 7 | 0 | | |
| 8 | 0 - | |
| 9 | SDI - LSB | |
| 10 | SDI - MSB | |
| 11 | Alignment Not Ready| In Align Submode |
| 12 | Rev Att Mode | In Attitude Mode |
| 13 | Nav Mode | In Nav Mode |
| 14 | Valid Set Heading | A valid set heading has to be input to the |
| | | IR. Magnetic heading outputs are no longer |
| | | being computed, but have the characteristics |
| | | of a Free Direction Gyro. |
| 15 | Attitude Invalid | Attitude Critical Fault |
| 16 | DC Fail | DC Power Less Than 18V |
| 17 | On DC | On DC Power |
| 18 | ADR Fault | The IR has detected an ADR input (TAS, ALT |
| | | and ALT RATE) as FW or NCD. Note functional |
| | | test data is ignored by the IR and last valid |
| | | input is used. |
| 19 | IR Failure | Navigation (Non Critical) Fault |
| 20 | DC Fail - On DC | The IR has detected that a DC fail occurred |
| | | while on DC from last turn on. |
| 21 | Align Fault | The IR has detected a position miscompare |
| | | or a Quality of Align fault. |
| 22 | No IR Initial | IR does not have position data or data |
| | | received is invalid. |
| 23 | Excess Motion Error| X or Y velocity greater than 0.011 ft/s |
| | | during align. |
| 24 | ADR/IR Fault | No data has been received from the ADR or |
| | | was received with a parity error. |
| 25 | Extreme Latitude | Latitude exceeds 73⁰N (+/-0.5⁰ hysteresis) |
| | | while Longitude is between 120⁰W and 90⁰W |
| | | (+/-2.5⁰ hysteresis) or Latitude exceeds |
| | | 82⁰N (+/-0.5⁰ hysteresis) or Latitude |
| | | exceeds 60⁰S (+/-0.5⁰ hysteresis). |
| | | Magnetic Deviation is set to zero. |
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 76
Config-2 Nov 01/08
TAI
----------------------------------------------------------------------------
| BIT | SIGNAL | 1 CONDITION |
|-----|--------------------|-----------------------------------------------|
| 26 | Align Time Status | Bits 28 27 26 Time Until Nav |
| 27 | | 1 1 1 7 - 10 minutes |
| 28 | | 1 1 0 6 minutes |
| | | 1 0 1 5 minutes |
| | | 1 0 0 4 minutes |
| | | 0 1 1 3 minutes |
| | | 0 1 0 2 minutes |
| | | 0 0 1 1 minute |
| | | 0 0 0 IN NAV MODE ONLY |
| 29 | COMPUT LAT MISCOMP | SIN/COS OF LATITUDE TEST FAILED |
| 30 | SSM | |
| 31 | SSM | |
| 32 | Parity | |
----------------------------------------------------------------------------
Digital Word 270 (IR Discretes)
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 77
Config-2 Nov 01/08
TAI
IR - BCD and Special Output Words
R Figure 009
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-14-00
Page 78
Config-2 Nov 01/08
TAI
IR - BCD and Special Output Words
R Figure 009A
R
EFF :
231-299, 314-399, 34-14-00
Page 79
Config-2 Nov 01/08
TAI
R IR - BCD and Special Output Words
R Figure 009B
R
EFF :
405-499, 34-14-00
Page 80
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
The data field of the test word 277 (21 bits) alternates between the
four first patterns shown in the following table below, except during
the REALIGN DECISION submode and the POWER OFF submode. During these
submodes the data field shall be as shown in pattern 5.
----------------------------------------------------------------------------
| BIT | DEFINITION |
|--------------------------------------------------------------------------|
| 1 | 1 - |
| 2 | 0 | |
| 3 | 1 | |
| 4 | 1 | LABEL 277 |
| 5 | 1 | |
| 6 | 1 | |
| 7 | 1 | |
| 8 | 1 - |
|--------------------------------------------------------------------------|
| 9 | SDI |
| 10 | SDI |
|---------|----------------------------------------------------------------|
| |PATTERN 1 |PATTERN 2|PATTERN 3|PATTERN 4| PATTERN 5 |
|---------|----------|---------|---------|---------|-----------------------|
| 11 | 0 | 0 | 1 | 1 | BCD MODE TIMER |
| 12 | 1 | 1 | 0 | 0 | (LSD) |
| 13 | 0 | 1 | 1 | 0 | (REALIGN AND |
| 14 | 1 | 1 | 0 | 0 | POWER OFF) |
|---------|----------|---------|---------|---------------------------------|
| 15 | 0 | 0 | 1 | 1 | BCD MODE TIMER |
| 16 | 1 | 1 | 0 | 0 | (MSD) |
| 17 | 0 | 1 | 1 | 0 | (REALIGN AND |
| 18 | 1 | 1 | 0 | 0 | POWER OFF) |
|---------|----------|---------|---------|---------------------------------|
| | | | | | MODE FLAG: |
| 19 | 0 | 0 | 1 | 1 | 00 = PWR OFF SUBMODE |
| 20 | 1 | 1 | 0 | 0 | 11 = REALIGN DECISION |
| | | | | | SUBMODE |
|---------|----------|---------|---------|---------|-----------------------|
| 21 | 0 | 1 | 1 | 0 | 0 |
| 22 | 1 | 1 | 0 | 0 | 0 |
| 23 | 0 | 0 | 1 | 1 | 0 |
| 24 | 1 | 1 | 0 | 0 | 0 |
| 25 | 0 | 1 | 1 | 0 | 0 |
| 26 | 1 | 1 | 0 | 0 | 0 |
| 27 | 0 | 0 | 1 | 1 | 0 |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page 81
Config-2 Nov 01/08
TAI
----------------------------------------------------------------------------
| BIT | DEFINITION |
|--------------------------------------------------------------------------|
| 28 | 1 | 1 | 0 | 0 | 0 |
| 29 | 0 | 1 | 1 | 0 | 0 |
| 30 | 0 | 0 | 1 | 0 | 0 |
| 31 | 0 | 0 | 1 | 1 | 0 |
|---------|----------|---------|---------|---------|-----------------------|
| 32 | Parity |
----------------------------------------------------------------------------
Digital Word 277 (CDU Test Word)
NOTE : Time (seconds) remaining in the POWER OFF submode and the time
____
(seconds) remaining in the REALIGN DECISION submode are
transmitted with the BCD data (bits 11-18).
----------------------------------------------------------------------------
| BIT | DEFINITION |
|--------------------------------------------------------------------------|
| 1 | 1 - |
| 2 | 1 | |
| 3 | 1 | |
| 4 | 0 | LABEL 350 |
| 5 | 1 | |
| 6 | 0 | |
| 7 | 0 | |
| 8 | 0 - |
|--------------------------------------------------------------------------|
| 9 | SDI - LSB |
| 10 | SDI - MSB |
|--------------------------------------------------------------------------|
| 11 TO 14 | SPARE |
|----------|---------------------------------------------------------------|
| 15 | TIME UNTIL NAV LEAST |
| 16 | TIME UNTIL NAV SIGNIFICANT |
| 17 | TIME UNTIL NAV DIGIT |
| 18 | TIME UNTIL NAV (BCD) |
|----------|---------------------------------------------------------------|
| 19 | TIME UNTIL NAV MOST |
| 20 | TIME UNTIL NAV SIGNIFICANT |
| 21 | TIME UNTIL NAV DIGIT |
| 22 | TIME UNTIL NAV (BCD) |
|----------|---------------------------------------------------------------|
| 23 | Action Code (1) Least |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page 82
Config-2 Nov 01/08
TAI
----------------------------------------------------------------------------
| BIT | DEFINITION |
|--------------------------------------------------------------------------|
| 24 | Action Code (1) Significant |
| 25 | Action Code (1) Digit |
| 26 | Action Code (1) |
|----------|---------------------------------------------------------------|
| 27 | Action Code (1) Most |
| 28 | Action Code (1) Significant |
| 29 | Action Code (1) Digit |
|----------|---------------------------------------------------------------|
| 30 | SSM |
| 31 | SSM |
| 32 | Parity |
----------------------------------------------------------------------------
Digital Word 350 (Action Code)
---------------------------------------------------------------------------
| ACTION CODE | MAINTENANCE MESSAGE | DESCRIPTION |
|-------------|---------------------|-------------------------------------|
| 01 | IR FAULT | Critical failure; Remove ADIRU for |
| | | maintenance |
| 02 | DELAYED MAINT | Non-Critical failure; Service ADIRU |
| | | when convenient |
| 03 | ENTER PPOS | Enter present position |
| 04 | SELECT ATT | Hard failure; Select ATTITUDE MODE |
| 05 | EXCESS MOTION | Excess motion detected during ALIGN |
| 06 | SWITCH ADR | Air Data Reference invalid |
| 07 | CHK C/B | Check circuit breakers |
| 08 | CDU FAULT | Remove CDU for maintenance |
| 09 | ENTER HEADING | Enter heading for ATTITUDE MODE |
| 10 | | Unassigned TBD |
----------------------------------------------------------------------------
Action Code - Maintenance Messages
R
EFF :
201-203, 34-14-00
Page 83
Config-2 Nov 01/08
TAI
IR - Binary Output Words
R Figure 010
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-14-00
Page 84
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
| 9 | SDI |
| 10 | SDI |
| 11 | MSB OF SATELLITES VISIBLE (16) |
| 12 | DADS STATUS Present = 0 Not present = 1 |
| 13 | DADS SOURCE Primary = 0 Secondary = 1 |
| 14 | IRS/FMS STATUS Present = 0 Not present = 1 |
| 15 | IRS/FMS SOURCE Primary = 0 Secondary = 1 |
| 16 | - |
| 17 | | NUMBER OF SATELLITES VISIBLE (0-15) |
| 18 | | |
| 19 | - |
| 20 | - |
| 21 | | NUMBER OF SATELLITES TRACKED (0-15) |
| 22 | | |
| 23 | - |
| 24 | - 00 = GPS |
| | | SYSTEM DESIGNATOR 01 = GLONASS |
| | | 10 = GPS GLONASS |
| 25 | - 11 = Spare |
| 26 | - |
| 27 | | GPSSU OPERATIONAL MODE (Ref table below) |
| 28 | - |
| 29 | MSB OF TRACKED SATELLITES |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
Discrete Word 273 Output Format
-----------------------------------------------------------
| GPSSU MODE | BIT 28 | BIT 27 | BIT 26 |
-----------------------------------------------------------
| SELF TEST | 0 | 0 | 0 |
| INITIALIZATION | 0 | 0 | 1 |
| ACQUISITION | 0 | 1 | 0 |
| NAVIGATION | 0 | 1 | 1 |
| ALTITUDE AIDING | 1 | 0 | 0 |
| DIFFERENTIAL MODE | 1 | 0 | 1 |
| DIR/SPEED AIDING MODE | 1 | 1 | 0 |
| FAULT | 1 | 1 | 1 |
-----------------------------------------------------------
R
EFF :
201-203, 34-14-00
Page 85
Config-2 Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-404,
----------------------------------------------------------------------------
| BIT | DEFINITION |
|--------------------------------------------------------------------------|
| 1 | 1 - |
| 2 | 1 | |
| 3 | 1 | |
| 4 | 0 | LABEL 350 |
| 5 | 1 | |
| 6 | 0 | |
| 7 | 0 | |
| 8 | 0 - |
|--------------------------------------------------------------------------|
| 9 | SDI - LSB |
| 10 | SDI - MSB |
|--------------------------------------------------------------------------|
| 11 TO 14 | SPARE |
|----------|---------------------------------------------------------------|
| 15 | TIME UNTIL NAV LEAST |
| 16 | TIME UNTIL NAV SIGNIFICANT |
| 17 | TIME UNTIL NAV DIGIT |
| 18 | TIME UNTIL NAV (BCD) |
|----------|---------------------------------------------------------------|
| 19 | TIME UNTIL NAV MOST |
| 20 | TIME UNTIL NAV SIGNIFICANT |
| 21 | TIME UNTIL NAV DIGIT |
| 22 | TIME UNTIL NAV (BCD) |
|----------|---------------------------------------------------------------|
| 23 | Action Code (1) Least |
| 24 | Action Code (1) Significant |
| 25 | Action Code (1) Digit |
| 26 | Action Code (1) |
|----------|---------------------------------------------------------------|
| 27 | Action Code (1) Most |
| 28 | Action Code (1) Significant |
| 29 | Action Code (1) Digit |
|----------|---------------------------------------------------------------|
| 30 | SSM |
| 31 | SSM |
| 32 | Parity |
----------------------------------------------------------------------------
Digital Word 350 (Action Code)
R
EFF :
401-404,
211-212, 215-215, 218-299, 301-399, 34-14-00
Page 86
Config-2 Nov 01/08
TAI
---------------------------------------------------------------------------
| ACTION CODE | MAINTENANCE MESSAGE | DESCRIPTION |
|-------------|---------------------|-------------------------------------|
| 01 | IR FAULT | Critical failure; Remove ADIRU for |
| | | maintenance |
| 02 | DELAYED MAINT | Non-Critical failure; Service ADIRU |
| | | when convenient |
| 03 | ENTER PPOS | Enter present position |
| 04 | SELECT ATT | Hard failure; Select ATTITUDE MODE |
| 05 | EXCESS MOTION | Excess motion detected during ALIGN |
| 06 | SWITCH ADR | Air Data Reference invalid |
| 07 | CHK C/B | Check circuit breakers |
| 08 | CDU FAULT | Remove CDU for maintenance |
| 09 | ENTER HEADING | Enter heading for ATTITUDE MODE |
| 10 | | Unassigned TBD |
----------------------------------------------------------------------------
Action Code - Maintenance Messages
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
| 9 | SDI |
| 10 | SDI |
| 11 | MSB OF SATELLITES VISIBLE (16) |
| 12 | DADS STATUS Present = 0 Not present = 1 |
| 13 | DADS SOURCE Primary = 0 Secondary = 1 |
| 14 | IRS/FMS STATUS Present = 0 Not present = 1 |
| 15 | IRS/FMS SOURCE Primary = 0 Secondary = 1 |
| 16 | - |
| 17 | | NUMBER OF SATELLITES VISIBLE (0-15) |
| 18 | | |
| 19 | - |
R
EFF :
401-404,
211-212, 215-215, 218-299, 301-399, 34-14-00
Page 87
Config-2 Nov 01/08
TAI
IR - Binary Output Words
R Figure 010A
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page 88
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
| 20 | - |
| 21 | | NUMBER OF SATELLITES TRACKED (0-15) |
| 22 | | |
| 23 | - |
| 24 | - 00 = GPS |
| | | SYSTEM DESIGNATOR 01 = GLONASS |
| | | 10 = GPS GLONASS |
| 25 | - 11 = Spare |
| 26 | - |
| 27 | | MMR OPERATIONAL MODE (Ref table below) |
| 28 | - |
| 29 | MSB OF TRACKED SATELLITES |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
Discrete Word 273 Output Format
-----------------------------------------------------------
| MMR MODE | BIT 28 | BIT 27 | BIT 26 |
-----------------------------------------------------------
| SELF TEST | 0 | 0 | 0 |
| INITIALIZATION | 0 | 0 | 1 |
| ACQUISITION | 0 | 1 | 0 |
| NAVIGATION | 0 | 1 | 1 |
| ALTITUDE AIDING | 1 | 0 | 0 |
| DIFFERENTIAL MODE | 1 | 0 | 1 |
| DIR/SPEED AIDING MODE | 1 | 1 | 0 |
| FAULT | 1 | 1 | 1 |
-----------------------------------------------------------
R
EFF :
401-404,
211-212, 215-215, 218-299, 301-399, 34-14-00
Page 89
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R ----------------------------------------------------------------------------
R | BIT | DEFINITION |
R |--------------------------------------------------------------------------|
R | 1 | 1 - |
R | 2 | 1 | |
R | 3 | 1 | |
R | 4 | 0 | LABEL 350 |
R | 5 | 1 | |
R | 6 | 0 | |
R | 7 | 0 | |
R | 8 | 0 - |
R |--------------------------------------------------------------------------|
R | 9 | SDI - LSB |
R | 10 | SDI - MSB |
R |--------------------------------------------------------------------------|
R | 11 TO 14 | SPARE |
R |----------|---------------------------------------------------------------|
R | 15 | TIME UNTIL NAV LEAST |
R | 16 | TIME UNTIL NAV SIGNIFICANT |
R | 17 | TIME UNTIL NAV DIGIT |
R | 18 | TIME UNTIL NAV (BCD) |
R |----------|---------------------------------------------------------------|
R | 19 | TIME UNTIL NAV MOST |
R | 20 | TIME UNTIL NAV SIGNIFICANT |
R | 21 | TIME UNTIL NAV DIGIT |
R | 22 | TIME UNTIL NAV (BCD) |
R |----------|---------------------------------------------------------------|
R | 23 | Action Code (1) Least |
R | 24 | Action Code (1) Significant |
R | 25 | Action Code (1) Digit |
R | 26 | Action Code (1) |
R |----------|---------------------------------------------------------------|
R | 27 | Action Code (1) Most |
R | 28 | Action Code (1) Significant |
R | 29 | Action Code (1) Digit |
R |----------|---------------------------------------------------------------|
R | 30 | SSM |
R | 31 | SSM |
R | 32 | Parity |
R ----------------------------------------------------------------------------
R Digital Word 350 (Action Code)
R
EFF :
405-499, 34-14-00
Page 90
Config-2 Nov 01/08
TAI
R ---------------------------------------------------------------------------
R | ACTION CODE | MAINTENANCE MESSAGE | DESCRIPTION |
R |-------------|---------------------|-------------------------------------|
R | 01 | IR FAULT | Critical failure; Remove ADIRU for |
R | | | maintenance |
R | 02 | DELAYED MAINT | Non-Critical failure; Service ADIRU |
R | | | when convenient |
R | 03 | ENTER PPOS | Enter present position |
R | 04 | SELECT ATT | Hard failure; Select ATTITUDE MODE |
R | 05 | EXCESS MOTION | Excess motion detected during ALIGN |
R | 06 | SWITCH ADR | Air Data Reference invalid |
R | 07 | CHK C/B | Check circuit breakers |
R | 08 | MSU FAULT | Remove MSU for maintenance |
R | 09 | ENTER HEADING | Enter heading for ATTITUDE MODE |
R | 10 | | Unassigned TBD |
R ----------------------------------------------------------------------------
R Action Code - Maintenance Messages
R -------------------------------------------------------------------------------
R | BIT No.| FUNCTION |
R |--------|--------------------------------------------------------------------|
R | 9 | SDI |
R | 10 | SDI |
R | 11 | MSB OF SATELLITES VISIBLE (16) |
R | 12 | DADS STATUS Present = 0 Not present = 1 |
R | 13 | DADS SOURCE Primary = 0 Secondary = 1 |
R | 14 | IRS/FMS STATUS Present = 0 Not present = 1 |
R | 15 | IRS/FMS SOURCE Primary = 0 Secondary = 1 |
R | 16 | - |
R | 17 | | NUMBER OF SATELLITES VISIBLE (0-15) |
R | 18 | | |
R | 19 | - |
R | 20 | - |
R | 21 | | NUMBER OF SATELLITES TRACKED (0-15) |
R | 22 | | |
R | 23 | - |
R | 24 | - 00 = GPS |
R | | | SYSTEM DESIGNATOR 01 = GLONASS |
R | | | 10 = GPS GLONASS |
R | 25 | - 11 = Spare |
R | 26 | - |
R | 27 | | MMR OPERATIONAL MODE (Ref table below) |
R | 28 | - |
R | 29 | MSB OF TRACKED SATELLITES |
R | 30 | SSM |
R
EFF :
405-499, 34-14-00
Page 91
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
R | 31 | SSM |
R | 32 | PARITY |
R -------------------------------------------------------------------------------
R Discrete Word 273 Output Format
R -----------------------------------------------------------
R | MMR MODE | BIT 28 | BIT 27 | BIT 26 |
R -----------------------------------------------------------
R | SELF TEST | 0 | 0 | 0 |
R | INITIALIZATION | 0 | 0 | 1 |
R | ACQUISITION | 0 | 1 | 0 |
R | NAVIGATION | 0 | 1 | 1 |
R | ALTITUDE AIDING | 1 | 0 | 0 |
R | DIFFERENTIAL MODE | 1 | 0 | 1 |
R | DIR/SPEED AIDING MODE | 1 | 1 | 0 |
R | FAULT | 1 | 1 | 1 |
R -----------------------------------------------------------
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
| 9 | - |
| 10 | | |
| 11 | | SPARE |
| 12 | | |
| 13 | | |
| 14 | - |
| 15 | - |
| | | SECONDARY GPSSU VALIDITY 00 = Valid |
| 16 | - 01 = Inactive |
| 17 | - 10 = Functional Test |
| | | PRIMARY GPSSU VALIDITY 11 = Fail |
| 18 | - |
| 19 | GPSSU SOURCE Primary = 0 Secondary = 1 |
| 20 | - |
| 21 | | NUMBER OF SATELLITES TRACKED (0-15) |
| 22 | | |
| 23 | - |
| 24 | - |
| | | SPARE |
| 25 | - |
R
EFF :
201-203, 405-499, 34-14-00
Page 92
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
| 26 | - |
| 27 | | GPIRS SENSOR OPERATIONAL MODE (Ref table below) |
| 28 | - |
| 29 | MSB OF TRACKED SATELLITES (16) |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
Discrete Word 274 Output Format
-----------------------------------------------------------
| GPIRS MODE | BIT 28 | BIT 27 | BIT 26 |
-----------------------------------------------------------
| SELF TEST | 0 | 0 | 0 |
| INITIALIZATION | 0 | 0 | 1 |
| ACQUISITION | 0 | 1 | 0 |
| NAVIGATION | 0 | 1 | 1 |
| ALTITUDE AIDING | 1 | 0 | 0 |
| SPARE | 1 | 0 | 1 |
| SPARE | 1 | 1 | 0 |
| FAULT | 1 | 1 | 1 |
-----------------------------------------------------------
-------------------------------------------------------------------------------
| BIT N⁰ | FUNCTION |
|--------|--------------------------------------------------------------------|
| 9 | GPS SYSTEM FAILURE |
| 10 | DUAL GPS CHANNEL FAIL |
| 11 | NO IR DATA |
| 12 | INVALID IR DATA |
| 13 | TM MISSING ON PRIMARY |
| 14 | TM MISSING ON SECONDARY |
| 15 | ARINC TRANSMISSION FAULT |
| 16 | NO AUTONOMOUS DATA FROM PRIMARY |
| 17 | NO AUTONOMOUS DATA FROM SECONDARY |
| 18 | AUTONOMOUS/IRS LATITUDE MISCOMPARE |
| 19 | SPARE |
| 20 | AUTONOMOUS/IRS LONGITUDE MISCOMPARE |
| 21 | SPARE |
| 22 | CLOCK PHASE MISCOMPARE ON PRIMARY |
| 23 | CLOCK PHASE MISCOMPARE ON SECONDARY |
| 24 | TM TIMING/UTC MISCOMPARE ON PRIMARY |
| 25 | TM TIMING/UTC MISCOMPARE ON SECONDARY |
| 26 | - |
R
EFF :
201-203, 34-14-00
Page 93
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| BIT N⁰ | FUNCTION |
|--------|--------------------------------------------------------------------|
| 27 | | RESERVED |
| 28 | | |
| 29 | - |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
ADIRU Maintenance Word 353
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
| 9 | SDI (LSB) |
| 10 | SDI (MSB) |
| 11 | - |
| 12 | | |
| 13 | | |
| 14 | | RESERVED |
| 15 | | |
| 16 | | |
| 17 | - |
| 18 | CMC INPUT BUS (OMS) No activity = 1 |
| 19 | DIFF BUS No. 2 No activity = 1 |
| 20 | DIFF BUS No. 2 No activity = 1 |
| 21 | DADS BUS 2 No activity = 1 |
| 22 | DADS BUS 1 No activity = 1 |
| 23 | IRS INPUT BUS 2 No activity = 1 |
| 24 | IRS INPUT BUS 1 No activity = 1 |
| 25 | GPS Fail = 1 |
| 26 | RF INPUT Fail = 1 |
| 27 | SENSOR UNIT Fail = 1 |
| 28 | TEST INHIBIT Inhibit = 1 |
| 29 | COMMAND WORD ACKNOWLEDGE Forced = 0 |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
GPSSU Navigation Maintenance Word (Label 355)
R
EFF :
201-203, 34-14-00
Page 94
Config-2 Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-230, 301-313, 401-404,
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
| 9 | - |
| 10 | | |
| 11 | | |
| 12 | | SPARE |
| 13 | | |
| 14 | - |
| 15 | - |
| | | SECONDARY MMR VALIDITY 00 = Valid |
| 16 | - 01 = Inactive |
| 17 | - 10 = Functional Test |
| | | PRIMARY MMR VALIDITY 11 = Fail |
| 18 | - |
| 19 | MMR SOURCE Primary = 0 Secondary = 1 |
| 20 | - |
| 21 | | NUMBER OF SATELLITES TRACKED (0-15) |
| 22 | | |
| 23 | - |
| 24 | - |
| | | SPARE |
| 25 | - |
| 26 | - |
| 27 | | GPIRS SENSOR OPERATIONAL MODE (Ref table below) |
| 28 | - |
| 29 | MSB OF TRACKED SATELLITES (16) |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
Discrete Word 274 Output Format
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 95
Config-2 Nov 01/08
TAI
-----------------------------------------------------------
| GPIRS MODE | BIT 28 | BIT 27 | BIT 26 |
-----------------------------------------------------------
| SELF TEST | 0 | 0 | 0 |
| INITIALIZATION | 0 | 0 | 1 |
| ACQUISITION | 0 | 1 | 0 |
| NAVIGATION | 0 | 1 | 1 |
| ALTITUDE AIDING | 1 | 0 | 0 |
| SPARE | 1 | 0 | 1 |
| SPARE | 1 | 1 | 0 |
| FAULT | 1 | 1 | 1 |
-----------------------------------------------------------
-------------------------------------------------------------------------------
| BIT N⁰ | FUNCTION |
|--------|--------------------------------------------------------------------|
| 9 | MMR SYSTEM FAILURE |
| 10 | DUAL MMR CHANNEL FAIL |
| 11 | NO IR DATA |
| 12 | INVALID IR DATA |
| 13 | TM MISSING ON PRIMARY |
| 14 | TM MISSING ON SECONDARY |
| 15 | ARINC TRANSMISSION FAULT |
| 16 | NO AUTONOMOUS DATA FROM PRIMARY |
| 17 | NO AUTONOMOUS DATA FROM SECONDARY |
| 18 | AUTONOMOUS/IRS LATITUDE MISCOMPARE |
| 19 | SPARE |
| 20 | AUTONOMOUS/IRS LONGITUDE MISCOMPARE |
| 21 | SPARE |
| 22 | CLOCK PHASE MISCOMPARE ON PRIMARY |
| 23 | CLOCK PHASE MISCOMPARE ON SECONDARY |
| 24 | TM TIMING/UTC MISCOMPARE ON PRIMARY |
| 25 | TM TIMING/UTC MISCOMPARE ON SECONDARY |
| 26 | - |
| 27 | | RESERVED |
| 28 | | |
| 29 | - |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
ADIRU Maintenance Word 353
R
EFF :
401-404,
211-212, 215-215, 218-230, 301-313, 34-14-00
Page 96
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
| 9 | SDI (LSB) |
| 10 | SDI (MSB) |
| 11 | - |
| 12 | | |
| 13 | | |
| 14 | | RESERVED |
| 15 | | |
| 16 | | |
| 17 | - |
| 18 | CMC INPUT BUS (OMS) No activity = 1 |
| 19 | DIFF BUS No. 2 No activity = 1 |
| 20 | DIFF BUS No. 2 No activity = 1 |
| 21 | DADS BUS 2 No activity = 1 |
| 22 | DADS BUS 1 No activity = 1 |
| 23 | IRS INPUT BUS 2 No activity = 1 |
| 24 | IRS INPUT BUS 1 No activity = 1 |
| 25 | MMR Fail = 1 |
| 26 | RF INPUT Fail = 1 |
| 27 | SENSOR UNIT Fail = 1 |
| 28 | TEST INHIBIT Inhibit = 1 |
| 29 | COMMAND WORD ACKNOWLEDGE Forced = 0 |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
MMR Navigation Maintenance Word (Label 355)
| 9 | - |
| | | SDI |
| 10 | - |
| 11 | - SA STATUS AS DETERMINED BY THE ADIRU 0 = sa off |
| | 1 = sa on |
| 12 | - |
| 13 | | POSITION DATA SOURCE/POSITION COMPARISON FAILURE MODE |
| 14 | - |
| 15 | - |
| | | SECONDARY MMR VALIDITY 00 = Valid |
| 16 | - 01 = Inactive |
| 17 | - 10 = Functional Test |
| | | PRIMARY MMR VALIDITY 11 = Fail |
| 18 | - |
R
EFF :
401-404,
211-212, 215-215, 218-299, 301-399, 34-14-00
Page 97
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
| 19 | MMR SOURCE Primary = 0 Secondary = 1 |
| 20 | - |
| 21 | | NUMBER OF SATELLITES TRACKED (0-15) |
| 22 | | |
| 23 | - |
| 24 | - |
| | | SPARE |
| 25 | - |
| 26 | - |
| 27 | | GPIRS SENSOR OPERATIONAL MODE (Ref table below) |
| 28 | - |
| 29 | MSB OF TRACKED SATELLITES (16) |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
Discrete Word 274 Output Format
-----------------------------------------------------------
| GPIRS MODE | BIT 28 | BIT 27 | BIT 26 |
-----------------------------------------------------------
| SELF TEST | 0 | 0 | 0 |
| INITIALIZATION | 0 | 0 | 1 |
| ACQUISITION | 0 | 1 | 0 |
| NAVIGATION | 0 | 1 | 1 |
| ALTITUDE AIDING | 1 | 0 | 0 |
| SPARE | 1 | 0 | 1 |
| SPARE | 1 | 1 | 0 |
| FAULT | 1 | 1 | 1 |
-----------------------------------------------------------
-------------------------------------------------------------------------------
| BIT N⁰ | FUNCTION |
|--------|--------------------------------------------------------------------|
| 9 | SDI (LSB) |
| 10 | SDI (LSB) |
| 11 | - |
| 12 | | |
| 13 | | |
| 14 | | |
| 15 | | |
| 16 | | |
| 17 | | |
| 18 | | |
R
EFF :
231-299, 314-399, 34-14-00
Page 98
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| BIT N⁰ | FUNCTION |
|--------|--------------------------------------------------------------------|
| 19 | | |
| 20 | | RESERVED |
| 21 | | |
| 22 | | |
| 23 | | |
| 24 | | |
| 25 | | |
| 26 | | |
| 27 | | |
| 28 | | |
| 29 | - |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
MMR Maintenance Word (Label 352)
| 9 | GPS SYSTEM FAILURE |
| 10 | DUAL GPS CHANNEL FAIL |
| 11 | NO IR DATA |
| 12 | INVALID IR DATA |
| 13 | TM MISSING ON PRIMARY |
| 14 | TM MISSING ON SECONDARY |
| 15 | ARINC TRANSMISSION FAULT |
| 16 | NO AUTONOMOUS DATA FROM PRIMARY |
| 17 | NO AUTONOMOUS DATA FROM SECONDARY |
| 18 | AUTONOMOUS/IRS LATITUDE MISCOMPARE |
| 19 | SPARE |
| 20 | AUTONOMOUS/IRS LONGITUDE MISCOMPARE |
| 21 | SPARE |
| 22 | CLOCK PHASE MISCOMPARE ON PRIMARY |
| 23 | CLOCK PHASE MISCOMPARE ON SECONDARY |
| 24 | TM TIMING/UTC MISCOMPARE ON PRIMARY |
| 25 | TM TIMING/UTC MISCOMPARE ON SECONDARY |
| 26 | - |
| 27 | | RESERVED |
| 28 | | |
| 29 | - |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
ADIRU Maintenance Word 353
R
EFF :
231-299, 314-399, 34-14-00
Page 99
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
| 9 | SDI (LSB) |
| 10 | SDI (MSB) |
| 11 | - |
| 12 | | |
| 13 | | |
| 14 | | RESERVED |
| 15 | | |
| 16 | | |
| 17 | - |
| 18 | CMC INPUT BUS (OMS) No activity = 1 |
| 19 | DIFF BUS No. 2 No activity = 1 |
| 20 | DIFF BUS No. 2 No activity = 1 |
| 21 | DADS BUS 2 No activity = 1 |
| 22 | DADS BUS 1 No activity = 1 |
| 23 | IRS INPUT BUS 2 No activity = 1 |
| 24 | IRS INPUT BUS 1 No activity = 1 |
| 25 | GPS Fail = 1 |
| 26 | RF INPUT Fail = 1 |
| 27 | SENSOR UNIT Fail = 1 |
| 28 | TEST INHIBIT Inhibit = 1 |
| 29 | COMMAND WORD ACKNOWLEDGE Forced = 0 |
| 30 | SSM |
| 31 | SSM |
| 32 | PARITY |
-------------------------------------------------------------------------------
GPSSU Navigation Maintenance Word (Label 355)
R | 9 | - |
R | | | SDI |
R | 10 | - |
R | 11 | - SPARE |
R | | |
R | 12 | - |
R | 13 | | POSITION DATA SOURCE/POSITION COMPARISON FAILURE MODE |
R | 14 | - |
R | 15 | - |
R | | | SECONDARY MMR VALIDITY 00 = Valid |
R | 16 | - 01 = Inactive |
R | 17 | - 10 = Functional Test |
R | | | PRIMARY MMR VALIDITY 11 = Fail |
R | 18 | - |
R
EFF :
231-299, 314-399, 405-499, 34-14-00
Page A0
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| BIT No.| FUNCTION |
|--------|--------------------------------------------------------------------|
R | 19 | MMR SOURCE Primary = 0 Secondary = 1 |
R | 20 | - |
R | 21 | | NUMBER OF SATELLITES TRACKED (0-15) |
R | 22 | | |
R | 23 | - |
R | 24 | - |
R | | | SPARE |
R | 25 | - |
R | 26 | - |
R | 27 | | GPIRS SENSOR OPERATIONAL MODE (Ref table below) |
R | 28 | - |
R | 29 | MSB OF TRACKED SATELLITES (16) |
R | 30 | SSM |
R | 31 | SSM |
R | 32 | PARITY |
R -------------------------------------------------------------------------------
R Discrete Word 274 Output Format
R -----------------------------------------------------------
R | GPIRS MODE | BIT 28 | BIT 27 | BIT 26 |
R -----------------------------------------------------------
R | SELF TEST | 0 | 0 | 0 |
R | INITIALIZATION | 0 | 0 | 1 |
R | ACQUISITION | 0 | 1 | 0 |
R | NAVIGATION | 0 | 1 | 1 |
R | ALTITUDE AIDING | 1 | 0 | 0 |
R | SPARE | 1 | 0 | 1 |
R | SPARE | 1 | 1 | 0 |
R | FAULT | 1 | 1 | 1 |
R -----------------------------------------------------------
R -------------------------------------------------------------------------------
R | BIT N⁰ | FUNCTION |
R |--------|--------------------------------------------------------------------|
R | 9 | SDI (LSB) |
R | 10 | SDI (LSB) |
R | 11 | - |
R | 12 | | |
R | 13 | | |
R | 14 | | |
R | 15 | | |
R | 16 | | |
R | 17 | | |
R | 18 | | |
R
EFF :
405-499, 34-14-00
Page A1
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| BIT N⁰ | FUNCTION |
|--------|--------------------------------------------------------------------|
R | 19 | | |
R | 20 | | RESERVED |
R | 21 | | |
R | 22 | | |
R | 23 | | |
R | 24 | | |
R | 25 | | |
R | 26 | | |
R | 27 | | |
R | 28 | | |
R | 29 | - |
R | 30 | SSM |
R | 31 | SSM |
R | 32 | PARITY |
R -------------------------------------------------------------------------------
R MMR Maintenance Word (Label 352)
R | 9 | GPS SYSTEM FAILURE |
R | 10 | DUAL GPS CHANNEL FAIL |
R | 11 | NO IR DATA |
R | 12 | INVALID IR DATA |
R | 13 | TM MISSING ON PRIMARY |
R | 14 | TM MISSING ON SECONDARY |
R | 15 | ARINC TRANSMISSION FAULT |
R | 16 | NO AUTONOMOUS DATA FROM PRIMARY |
R | 17 | NO AUTONOMOUS DATA FROM SECONDARY |
R | 18 | AUTONOMOUS/IRS LATITUDE MISCOMPARE |
R | 19 | SPARE |
R | 20 | AUTONOMOUS/IRS LONGITUDE MISCOMPARE |
R | 21 | SPARE |
R | 22 | CLOCK PHASE MISCOMPARE ON PRIMARY |
R | 23 | CLOCK PHASE MISCOMPARE ON SECONDARY |
R | 24 | TM TIMING/UTC MISCOMPARE ON PRIMARY |
R | 25 | TM TIMING/UTC MISCOMPARE ON SECONDARY |
R | 26 | - |
R | 27 | | RESERVED |
R | 28 | | |
R | 29 | - |
R | 30 | SSM |
R | 31 | SSM |
R | 32 | PARITY |
R -------------------------------------------------------------------------------
R ADIRU Maintenance Word 353
R
EFF :
405-499, 34-14-00
Page A2
Config-2 Nov 01/08
TAI
R -------------------------------------------------------------------------------
R | BIT No.| FUNCTION |
R |--------|--------------------------------------------------------------------|
R | 9 | SDI (LSB) |
R | 10 | SDI (MSB) |
R | 11 | - |
R | 12 | | |
R | 13 | | |
R | 14 | | RESERVED |
R | 15 | | |
R | 16 | | |
R | 17 | - |
R | 18 | CMC INPUT BUS (OMS) No activity = 1 |
R | 19 | DIFF BUS No. 2 No activity = 1 |
R | 20 | DIFF BUS No. 2 No activity = 1 |
R | 21 | DADS BUS 2 No activity = 1 |
R | 22 | DADS BUS 1 No activity = 1 |
R | 23 | IRS INPUT BUS 2 No activity = 1 |
R | 24 | IRS INPUT BUS 1 No activity = 1 |
R | 25 | GPS Fail = 1 |
R | 26 | RF INPUT Fail = 1 |
R | 27 | SENSOR UNIT Fail = 1 |
R | 28 | TEST INHIBIT Inhibit = 1 |
R | 29 | COMMAND WORD ACKNOWLEDGE Forced = 0 |
R | 30 | SSM |
R | 31 | SSM |
R | 32 | PARITY |
R -------------------------------------------------------------------------------
R GPSSU Navigation Maintenance Word (Label 355)
R
EFF :
405-499, 34-14-00
Page A3
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
---------------------------------------
| SIGNAL | OUTPUT | DEFINITION |
|----------|-------------|------------|
| ON BAT | OPEN/+28VDC | NO/YES |
| IR FAULT | OPEN/+28VDC | NO/YES |
| IR ALIGN | OPEN/GROUND | NO/YES |
---------------------------------------
Discrete Outputs
- ON BAT
When the IR is powered with batteries, this discrete delivers a
28VDC state and sets the ON BAT light to on.
- IR FAULT
When a failure is detected by the IR, this discrete delivers a
28VDC state and sets the FAULT legend to on.
- IR ALIGN
When the IR is aligning, this discrete delivers a ground and sets
the ALIGN legend to on.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page A4
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R ---------------------------------------
R | SIGNAL | OUTPUT | DEFINITION |
R |----------|-------------|------------|
R | ON BAT | OPEN/+28VDC | NO/YES |
R | IR FAULT | OPEN/+28VDC | NO/YES |
R | IR OFF | OPEN/GROUND | NO/YES |
R ---------------------------------------
R Discrete Outputs
R - ON BAT
R When the IR is powered with batteries, this discrete delivers a
R 28VDC state and sets the ON BAT light to on.
R - IR FAULT
R When a failure is detected by the IR, this discrete delivers a
R 28VDC state and sets the FAULT legend to on.
R - IR OFF
R When the IR is set to off, this discrete delivers a ground and sets
R the OFF legend to on.
3. ________________________________
Operation/Control and Indicating
A. Control
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A5
Config-2 Nov 01/08
TAI
IR - Operation/Control and Indicating
R Figure 011
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page A6
Config-2 Nov 01/08
TAI
R IR - Operation/Control and Indicating
R Figure 011A
R
EFF :
405-499, 34-14-00
Page A7
Config-2 Nov 01/08
TAI
IR - Alignment Procedure from the MCDU
R Figure 012
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page A8
Config-2 Nov 01/08
TAI
The relation between the mode selection and system response is shown
in the figure
R (Ref. Fig. 013)
R A. Control
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A9
Config-2 Nov 01/08
TAI
R IR - Alignment Procedure from the MCDU
R Figure 012A
R
EFF :
405-499, 34-14-00
Page A10
Config-2 Nov 01/08
TAI
IR - Mode State Diagram
R Figure 013
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A11
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
- a message on the UPPER ECAM DU indicates that the IRs are in ALIGN
submode with the maximum time until NAV
- in the NAV mode, rapid realignment of the IR is initiated by
switching the OFF/NAV/ATT selector switch from NAV to OFF and back
to NAV within 5 seconds. The IR starts a 30-second realignment
submode with existing attitude and heading angles and rezeroed
velocities
- the system does not enter the rapid realignment sequence if the
ground speed is greater than 20 knots.
The CDU permits to observe some particular parameters (Ref.
34-12-00).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page A12
Config-2 Nov 01/08
TAI
MCDU - INIT Page
R Figure 014
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A13
Config-2 Nov 01/08
TAI
Initial position data are verified by the IR if Set Latitude and
Set Longitude compare within one degree of the last latitude and
longitude from the previous flight. If a miscompare exists then:
- on the ADIRS CDU, the ALIGN light flashes.
- a message ENTER PPOS is displayed on the CDU (DATA DISPLAY
selector switch in STS position).
The miscompare is removed and the position data verified by the
IR when:
- the last two Set Latitudes received by the IR are identical and
the last two Set Longitudes received by the IR are identical,
or
- the last Set Latitude and Set Longitude received by the IR
compare within one degree of the latitude and longitude from
the previous flight.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page A14
Config-2 Nov 01/08
TAI
- the attitude information is flagged on the PFD.
Thirty seconds after motion detection, the system reverts to a
full alignment (time to the end of alignment will revert to 9 min
30 s).
It is not necessary to re-enter the position.
R - A message on the UPPER ECAM DU indicates that the IRs are in ALIGN
R submode with the maximum time until NAV.
R - In the NAV mode, rapid realignment of the IR is initiated by
R switching the OFF/NAV/ATT selector switch from NAV to OFF and back
R to NAV within 5 seconds. The IR starts a 30-second realignment
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A15
Config-2 Nov 01/08
TAI
R submode with existing attitude and heading angles and rezeroed
R velocities.
R - The system does not enter the rapid realignment sequence if the
R ground speed is greater than 20 knots.
EFF :
405-499, 34-14-00
Page A16
Config-2 Nov 01/08
TAI
R NAV
R IR NOT ALIGNED
R EXCESS MOTION
R IR 1(2)(3) IN ALIGN
R
R - the attitude information is flagged on the PFD.
R Thirty seconds after motion detection, the system reverts to a
R full alignment (time to the end of alignment will revert to 9 min
R 30 s).
R It is not necessary to re-enter the position.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A17
Config-2 Nov 01/08
TAI
The ENTER HEADING message is displayed on the CDU (DATA DISPLAY
selector switch in STS position) when the ATT mode is selected until
valid heading initialization is received from the MCDU or the CDU.
The ATT mode is normally engaged with the aircraft in level flight.
A 20-second period is needed with the aircraft in level flight to
perform an attitude erection to initialize a level attitude. During
this period, the data normally computed in ATT mode have SSMs set to
NCD.
In the event the ATT mode is engaged with the aircraft not in level
flight, an erection cut-out function delays erection when yaw rate
exceeds 0.5 deg/s and permits erection to continue when yaw rate
drops below 0.25 deg/s. Twenty seconds of flight with the erection
cut-out switch disengaged is required to erect the attitude.
B. Indicating
Attitude and heading information is computed by the ADIRU (IR portion)
and processed by the associated DMC. The attitude data are displayed on
the PFD and the heading data are displayed on the PFD, the ND and the
RMI.
In addition, vertical speed (V/S) is displayed on the PFD and Ground
Speed and wind indications are displayed on the ND.
In normal configuration, with the ATT/HDG selector switch in NORM
position, the IR1 data are displayed on the CAPT PFD, ND and the RMI
(Ref. ATA 34-57-00). The IR2 data are displayed on the F/O PFD and ND.
The following parameters can be displayed on the CDU liquid crystal
display according to the position of the DATA DISPLAY selector switch on
the CDU:
- wind (WIND)
- present position (PPOS)
- true heading (HDG)
- status of selected system conditions (STS)
- track and ground speed (TK/GS)
- test values (TEST).
The sources of the data displayed are controlled by the SYS DISPLAY
selector switch on the CDU.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A18
Config-2 Nov 01/08
TAI
R - IR 1(2)(3) FAULT message displayed on the upper ECAM DU:
R IR x MODE SEL...ATT
R The IR is designed so that the ATT mode can be used after the BITE
R has detected failures which will cause excessive NAV mode data errors
R but do not disable the ATT mode mechanization. However, it is
R recommended to stay in the NAV mode even with excessive navigation
R errors because of higher accuracy of attitude signals and more
R complete signal processing. The ATT mode must always be used after
R loss of power or a similar situation in flight where a new
R alignment/leveling is required.
R The ATT mode is normally engaged with the aircraft in level flight.
R A 20-second period is needed with the aircraft in level flight to
R perform an attitude erection to initialize a level attitude. During
R this period, the data normally computed in ATT mode has SSMs set to
R NCD.
R In the event the ATT mode is engaged with the aircraft not in level
R flight, an erection cut-out function delays erection when the yaw
R rate exceeds 0.5 deg/s and permits erection to continue when yaw rate
R drops below 0.25 deg/s. Twenty seconds of flight with the erection
R cut-out switch disengaged is required to erect the attitude.
R B. Indicating
R Attitude and heading information is computed by the ADIRU (IR portion)
R and processed by the associated DMC. The attitude data is displayed on
R the PFD and the heading data is displayed on the PFD, the ND and the RMI.
R In addition, the vertical speed (V/S) is displayed on the PFD and Ground
R Speed and wind indications are displayed on the ND.
R In normal configuration, with the ATT/HDG selector switch in NORM
R position, the IR1 data is displayed on the CAPT PFD, ND and the RMI (Ref.
R ATA 34-57-00). The IR2 data is displayed on the F/O PFD and ND.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A19
Config-2 Nov 01/08
TAI
IR - Attitude Information Display
R Figure 015
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A20
Config-2 Nov 01/08
TAI
The pitch scale comprises white reference lines and associated
pitch angle values. The lines are given every 2.5 degrees from 0
to 10 degrees, then for the 15 degrees, 20 degrees, 30 degrees,
50 degrees and 80 degrees values. Beyond 30 degrees, red large
arrow heads (V-shaped) indicate an excessive attitude and the
direction to follow in order to reduce it (item B).
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A21
Config-2 Nov 01/08
TAI
IR - Heading Information Display on the PFD
R Figure 016
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A22
Config-2 Nov 01/08
TAI
Below the sphere, a heading scale provides the pilot with the
aircraft actual track and relative selection. This heading scale
is graduated every 5 deg. (item A).
In case of failure, the heading graduation disappears on the two
scales and a red HDG flag appears on the lower heading scale
(item B). It flashes for a few seconds, then remains steady.
Furthermore, in case of discrepancy detected by the FWC between
CAPT and F/O heading indications, with the heading signal valid,
a CHECK HDG amber message is displayed at the center of the
heading scale (item C).
(b) On the ND
R (Ref. Fig. 017)
The heading data is displayed on the ND in the three following
operating modes: ROSE, ARC and PLAN.
The ROSE mode and the ARC mode are oriented with respect to the
aircraft heading, while the PLAN mode is oriented with respect to
the true north.
1
_ True heading display
In ROSE or ARC mode, when true heading is displayed, a cyan
TRUE message appears at the top of the ND.
2
_ ROSE mode (item A)
In this mode each pilot has three different sub-modes of
presentation on his ND: ROSE-ILS/ROSE-VOR/ROSE-NAV.
In the three ROSE sub-modes, the ND provides a display which
is similar to that of a conventional HSI, i.e. a rotating
heading dial orientated to the North and giving to the pilot
the aircraft actual magnetic or true heading with as reference
the fixed yellow lubber line at the top of the dial.
3
_ ARC mode (item B)
In this mode, the ND displays a 90 deg. heading sector ahead
of the aircraft giving the aircraft actual magnetic or true
heading with respect to the fixed yellow lubber line at the
top of the scale.
4
_ PLAN mode
The ND displays a static map orientated with respect to the
true North.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page A23
Config-2 Nov 01/08
TAI
IR - Heading Information Display on the ND
R Figure 017
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A24
Config-2 Nov 01/08
TAI
5
_ Heading failure (items C and D)
In case of heading failure, the scale and all symbols
positioned on the ROSE and ARC scales go out of view; a red
HDG flag comes into view below the scale after flashing for a
few seconds, when the DMC has detected an anomaly concerning
the heading parameter.
In addition, if a discrepancy between CAPT and F/O sides is
detected by the comparison inside the FWCs, the CHECK HDG
message is displayed in amber on both NDs (item E).
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A25
Config-2 Nov 01/08
TAI
IR - Heading Information Display on the VOR/DME RMI
R Figure 018
EFF :
201-203, 34-14-00
Page A26
Config-2 Nov 01/08
TAI
IR - Heading Information Display on the VOR/ADF/DME RMI
R Figure 018A
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-14-00
Page A27
Config-2 Nov 01/08
TAI
R (a) On the PFD
R When the true heading is displayed, a TRUE white message appears
R above the heading scale (item A).
R A blank heading scale (with 10 deg. spaced marks without any
R indicated value) is provided on the horizon line. The marks are
R just under this line.
R This scale moves as the aircraft heading varies. For important
R nose-up or nose-down, the heading graduations remain at the lower
R or upper sector limit.
R Below the sphere, a heading scale provides the pilot with the
R aircraft actual track and relative selection. This heading scale
R is graduated every 5 deg. (item A).
R In case of failure, the heading graduation disappears on the two
R scales and a red HDG flag appears on the lower heading scale
R (item B). It flashes for a few seconds, then remains steady.
R Furthermore, in case of discrepancy detected by the FWC between
R CAPT and F/O heading indications, with the heading signal valid,
R a CHECK HDG amber message is displayed at the center of the
R heading scale (item C).
R (b) On the ND
R (Ref. Fig. 017)
R The heading data is displayed on the ND in the following three
R operating modes: ROSE, ARC and PLAN.
R The ROSE mode and the ARC mode are oriented with respect to the
R aircraft heading, while the PLAN mode is oriented with respect to
R the true north.
R 1
_ True heading display
R In ROSE or ARC mode, when the true heading is displayed, a
R cyan TRUE message appears at the top of the ND.
R 2
_ ROSE mode (item A)
R In this mode, each pilot has three different sub-modes of
R presentation on his ND: ROSE-ILS/ROSE-VOR/ROSE-NAV.
R In the three ROSE sub-modes, the ND provides a display which
R is similar to that of a conventional HSI, i.e. a rotating
R heading dial orientated to the North and giving to the pilot
R the aircraft actual magnetic or true heading with, as
R reference, the fixed yellow lubber line at the top of the
R dial.
R 3
_ ARC mode (item B)
R In this mode, the ND displays a 90 deg. heading sector ahead
R of the aircraft giving the aircraft actual magnetic or true
R heading with respect to the fixed yellow lubber line at the
R top of the scale.
EFF :
405-499, 34-14-00
Page A28
Config-2 Nov 01/08
TAI
R 4
_ PLAN mode
R The ND displays a static map orientated with respect to the
R true North.
R 5
_ Heading failure (items C and D)
R In case of heading failure, the scale and all symbols
R positioned on the ROSE and ARC scales go out of view; a red
R HDG flag comes into view below the scale after flashing for a
R few seconds, when the DMC has detected an anomaly concerning
R the heading parameter.
R In addition, if a discrepancy between the CAPT and F/O sides
R is detected by the comparison inside the FWCs, the CHECK HDG
R message is displayed in amber on both NDs (item E).
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A29
Config-2 Nov 01/08
TAI
IR - GS, Wind, Vertical Speed Information Display
R Figure 019
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A30
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A31
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
(b) a fixed white scale with 500 ft/mn spaced marks from -2000 ft/mn
to +2000 ft/mn
(c) a needle giving in analog form the actual vertical speed value
(e) above +6000 ft/mn (or below -6000 ft/mn), the needle remains
stopped where it is.
When the vertical speed exceeds +6000 ft/mn or -6000 ft/mn, the
digital indication and the analog needle change from green to
amber.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A32
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
C. Warnings
R (Ref. Fig. 020, 021, 022, 023, 024)
(1) In addition to the ATT or HDG flags displayed on the PFDs, NDs and on
the CDU, warning messages are displayed on the lower part of the
upper ECAM DU.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page A33
Config-2 Nov 01/08
TAI
NAV IR 1(2)(3) fault message
R Figure 020
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A34
Config-2 Nov 01/08
TAI
NAV IR 1+2 FAULT Message
R Figure 021
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A35
Config-2 Nov 01/08
TAI
NAV IR 1+3 (2+3) FAULT Message
R Figure 022
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A36
Config-2 Nov 01/08
TAI
NAV ATT DISCREPANCY Message
R Figure 023
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A37
Config-2 Nov 01/08
TAI
NAV HDG DISCREPANCY Message
R Figure 024
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A38
Config-2 Nov 01/08
TAI
NAV GPS - Fault Messages
R Figure 025
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A39
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R C. Warnings
R (Ref. Fig. 020, 021, 022, 023, 024)
R (1) In addition to the ATT or HDG flags displayed on the PFDs and the
R NDs, warning messages are displayed on the lower part of the upper
R ECAM DU.
(1) History
The inertial parameters to be considered to evaluate the level of
performance of an inertial system after flight completion are:
- the radial position error (in NM)
- the residual ground speed error (in kts).
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A40
Config-2 Nov 01/08
TAI
Depending on their magnitude noticed at the end of the flight, the
concerned inertial system(s) shall or shall not be removed from the
aircraft.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A41
Config-2 Nov 01/08
TAI
ADIRU RPE removal criteria
R Figure 026
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A42
Config-2 Nov 01/08
TAI
The upper limit of the grey band is fixed at 33 NM.
(b) Compare the recorded ground speed values with the following
limits:
- if the residual ground speed error is 15 kts or greater after
each of two consecutive flights, replace the ADIRU
- if the residual ground speed error is 21 kts or greater at the
end of any one flight, replace the ADIRU.
R (a) A check of the residual ground speed can be made on the CAPT
R (IR1) and F/O (IR2) Navigation Displays (ND). The residual ground
R speed of the IR3 can be read on the CAPT ND by setting the ATT
R HDG selector switch to CAPT/3.
R (b) Compare the recorded ground speed values with the following
R limits:
R - if the residual ground speed error is 15 kts or greater after
R each of two consecutive flights, replace the ADIRU
R - if the residual ground speed error is 21 kts or greater at the
R end of any one flight, replace the ADIRU.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page A43
Config-2 Nov 01/08
TAI
**ON A/C 001-050, 053-099,
R A. Inputs
EFF :
001-050, 053-099, 34-14-00
Page 1
Config-3 Feb 01/07
TAI
R - label 062: PSEUDO RANGE FINE 4
R - label 063: RANGE RATE
R - label 064: DELTA RANGE
R - label 065: SV POSITION X
R - label 066: SV POSITION X FINE 4
R - label 070: SV POSITION Y
R - label 071: SV POSITION Y FINE 4
R - label 072: SV POSITION Z
R - label 073: SV POSITION Z FINE 4
R - label 074: UTC MEASURE TIME
R - label 076: GPS ALTITUDE (MSL)
R - label 101: HDOP
R - label 102: VDOP
R - label 103: GPS TRACK ANGLE TRUE
R - label 110: GPS LATITUDE 2
R - label 111: GPS LONGITUDE
R - label 112: GPS GROUND SPEED
R - label 120: GPS LATITUDE LSBS 2
R - label 121: GPS LONGITUDE LSBS
R - label 125: GPS UTC BCD
R - label 130: GPS INTEGRITY LIMIT
R - label 136: VERTICAL FIGURE OF MERIT
R - label 140: UTC BIN FINE 4
R - label 141: UTC BIN FRACTION 4
R - label 150: GPS UTC BIN
R - label 165: GPS VERTICAL VELOCITY
R - label 166: GPS NORTH VELOCITY
R - label 174: GPS EAST VELOCITY
R - label 247: HORIZ FIGURE OF MERIT
R - label 260: GPS DATE
R - label 273: GPS SENSOR STATUS
R - label 377: EQUIPMENT IDENT
EFF :
001-050, 053-099, 34-14-00
Page 2
Config-3 Feb 01/07
TAI
R **ON A/C 001-050, 053-099,
(1) History
The inertial parameters to be considered to evaluate the level of
performance of an inertial system after flight completion are:
- the radial position error (in NM)
- the residual ground speed error (in kts).
Depending on their magnitude noticed at the end of the flight, the
concerned inertial system(s) shall or shall not be removed from the
aircraft.
EFF :
001-050, 053-099, 34-14-00
Page 3
Config-3 Feb 01/07
TAI
ADIRU RPE Removal Criteria
Figure 001
EFF :
001-050, 053-099, 34-14-00
Page 4
Config-3 Feb 01/07
TAI
The lower limit of the grey band is fixed at 2T + 2.
- Flight duration > 10 FH:
The lower limit of the grey band is fixed at 22 NM.
(b) Compare the recorded ground speed values with the following
limits:
- if the residual ground speed error is 15 kts or greater after
each of two consecutive flights, replace the ADIRU
- if the residual ground speed error is 21 kts or greater at the
end of any one flight, replace the ADIRU.
EFF :
001-050, 053-099, 34-14-00
Page 5
Config-3 Feb 01/07
TAI
ATTITUDE, HEADING AND POSITION - ADJUSTMENT/TEST
________________________________________________
TASK 34-14-00-710-003
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-14-00-010-050
A. Get Access
(1) Put the access platform in position at the access door 822.
EFF :
ALL 34-14-00
Page 501
Aug 01/98
R
TAI
(3) On the battery power center 105VU:
- loosen the two screws and remove the protective cover.
Subtask 34-14-00-865-054
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-14-00
Page 502
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-299, 301-399,
R 401-404,
Subtask 34-14-00-860-055
(3) Do the EIS start procedure (PFD and ND only) (Ref. TASK 31-60-00-860-
001).
R Subtask 34-14-00-860-055-A
R (3) Do the EIS start procedure (PFD and ND only) (Ref. TASK 31-60-00-860-
R 001).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-14-00
Page 503
Nov 01/08
TAI
R **ON A/C ALL
4. Procedure
_________
Subtask 34-14-00-710-054
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the ADR1, ADR2 and ADR3 - make sure that the OFF legends of the
pushbutton switches. ADR1, ADR2 and ADR3 pushbutton
switches are on.
3. On the ADIRS CDU, set the On the ADIRS CDU, the ALIGN legend of
OFF/NAV/ATT selector switch the IR1 annunciatior goes off
related to the IR1 to OFF. On the Captain PFD, the pitch and roll
attitudes stay in view.
4. On the center pedestal, on the On the Captain PFD, the ATT flag is
SWITCHING panel 8VU, set the ATT shown (ignore the related warnings).
HDG selector switch to NORM then
to F/O/3.
5. On the ADIRS CDU, set the - On the ADIRS CDU, the ALIGN legend of
OFF/NAV/ATT selector switch the IR2 annunciator goes off
EFF :
ALL 34-14-00
Page 504
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
related to the IR2 to OFF. - On the First Officer PFD, the pitch
and roll attitudes stay in view.
6. On the center pedestal, on the On the First Officer PFD, the ATT flag
SWITCHING panel 8VU, set the ATT is shown (ignore the related warnings).
HDG selector switch to NORM.
- set the OFF/NAV/ATT selector On the ADIRS CDU, the ALIGN legend of
switch related to the IR3 to the IR3 annunciator goes off.
OFF
R Subtask 34-14-00-710-054-A
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Push the ADR1, ADR2 and ADR3 - Make sure that the OFF legends of the
R pushbutton switches. ADR1, ADR2 and ADR3 pushbutton
R switches are on.
R 3. On the ADIRS MSU, set the On the Captain PFD, the pitch and roll
R OFF/NAV/ATT selector switch attitudes stay in view.
R related to the IR1 to OFF.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-14-00
Page 505
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R 4. On the center pedestal, on the On the Captain PFD, the ATT flag is
R SWITCHING panel 8VU, set the ATT shown (ignore the related warnings).
R HDG selector switch to NORM then
R to F/O/3.
R 5. On the ADIRS MSU, set the On the First Officer PFD, the pitch and
R OFF/NAV/ATT selector switch roll attitudes stay in view.
R related to the IR2 to OFF.
R 6. On the center pedestal, on the On the First Officer PFD, the ATT flag
R SWITCHING panel 8VU, set the ATT is shown (ignore the related warnings).
R HDG selector switch to NORM.
5. Close-up
________
Subtask 34-14-00-860-056
(3) Make sure that the work area is clean and clear of tool(s) and other
items.
Subtask 34-14-00-410-050
B. Close Access
(1) Install the protective cover on the battery power center 105VU.
R
EFF :
ALL 34-14-00
Page 506
Nov 01/08
TAI
TASK 34-14-00-710-004
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-14-00
Page 507
Feb 01/08
R
TAI
3. __________
Job Set-up
Subtask 34-14-00-010-051
A. Get Access
(1) Put the access platform in position at the access door 822.
Subtask 34-14-00-865-055
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-14-00
Page 508
Feb 01/08
R
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R **ON A/C 211-212, 215-215, 218-299, 306-399, 401-499,
Subtask 34-14-00-865-056
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
Subtask 34-14-00-860-057
(3) On the ADIRS CDU, make sure that the three OFF/NAV/ATT selector
switches are at OFF.
EFF :
ALL 34-14-00
Page 509
Nov 01/08
TAI
(4) On the FCU, on the CAPT and F/O EFIS control sections, set the mode
selector switch to the ROSE-NAV .
R Subtask 34-14-00-860-057-A
R (3) On the ADIRS MSU, make sure that the three OFF/NAV/ATT selector
R switches are at OFF.
R (4) On the FCU, on the CAPT and F/O EFIS control sections, set the mode
R selector switch to the ROSE-NAV .
R (6) Put the safety barriers in position around the RAT area.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-14-00
Page 510
Nov 01/08
TAI
R **ON A/C ALL
4. Procedure
_________
Subtask 34-14-00-710-055
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to The ADIRS IR1 page comes into view.
the IR1 indication
- push the line key adjacent to The ADIRS IR1 INTERFACE TEST page comes
the INTERFACE TEST indication into view.
R
EFF :
ALL 34-14-00
Page 511
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
On the CAPT and F/O PFDs, the CHECK ATT
indication flashes during a short time
then stays stable
On the CAPT and F/O NDs, the CHECK HDG
indication comes into view
On the upper ECAM display unit, these
indications come into view :
NAV HDG DISCREPANCY
- HDG.............X CHECK
- ATT HDG SWTG....AS RQRD
NAV ATT DISCREPANCY
- ATT.............X CHECK
- ATT HDG SWTG....AS RQRD
On the panels 130VU and 131VU, the
MASTER CAUT lights come on
You can hear the single chime.
R
EFF :
001-050, 053-099, 34-14-00
Page 512
Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
Subtask 34-14-00-710-055-A
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to The IR1 page comes into view.
the IR1 indication
- push the line key adjacent to The IR1 INTERFACE TEST 1/2 page comes
the INTERFACE TEST indication into view.
- on the keyboard push the NEXT The IR1 INTERFACE TEST 2/2 page comes
PAGE function key. into view.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page 513
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
On the CAPT and F/O NDs, the CHECK HDG
indication comes into view
On the upper ECAM display unit, these
indications come into view :
NAV HDG DISCREPANCY
- HDG.............X CHECK
- ATT HDG SWTG....AS RQRD
NAV ATT DISCREPANCY
- ATT.............X CHECK
- ATT HDG SWTG....AS RQRD
On the panels 130VU and 131VU, the
MASTER CAUT lights come on
You can hear the single chime.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page 514
Nov 01/08
TAI
R **ON A/C 405-499,
R Subtask 34-14-00-710-055-B
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Push the line key adjacent to The IR1 page comes into view.
R the IR1 indication.
R - Push the line key adjacent to The IR1 INTERFACE TEST 1/2 page comes
R the INTERFACE TEST indication. into view.
R - On the keyboard push the NEXT The IR1 INTERFACE TEST 2/2 page comes
R PAGE function key. into view.
R
EFF :
405-499, 34-14-00
Page 515
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R On the CAPT and F/O NDs, the CHECK HDG
R indication comes into view.
R On the upper ECAM display unit, these
R indications come into view:
R NAV HDG DISCREPANCY
R - HDG.............X CHECK
R - ATT HDG SWTG....AS RQRD
R NAV ATT DISCREPANCY
R - ATT.............X CHECK
R - ATT HDG SWTG....AS RQRD
R On the F/O and CAPT glareshield panels
R 130VU and 131VU, the MASTER CAUT lights
R come on.
R You can hear the single chime.
5. Close-up
________
Subtask 34-14-00-860-058
R
EFF :
ALL 34-14-00
Page 516
Nov 01/08
TAI
(3) De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
(4) Make sure that the work area is clean and clear of tool(s) and other
items.
Subtask 34-14-00-865-057
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
7XE, 5CC1, 5CC2
Subtask 34-14-00-410-051
C. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
ALL 34-14-00
Page 517
Nov 01/08
TAI
TASK 34-14-00-740-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-14-00-010-052
A. Get Access
(1) Put the access platform in position at the access door 822.
R
EFF :
ALL 34-14-00
Page 518
Feb 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-299, 301-399,
R 401-404,
Subtask 34-14-00-860-050
(2) Do the EIS start procedure (PFD and ND only) (Ref. TASK 31-60-00-860-
001).
(4) On the panel 13VU, on the CAPT and F/O EFIS control sections of the
FCU, set the mode selector switch to ROSE-NAV .
NOTE : This test is for the system 1. For the systems 2 and 3, use
____
the indications between the parentheses.
R Subtask 34-14-00-860-050-A
R (2) Do the EIS start procedure (PFD and ND only) (Ref. TASK 31-60-00-860-
R 001).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-14-00
Page 519
Nov 01/08
TAI
R (3) On the overhead panel:
R - On the FLT CTL panels 23VU and 24VU, make sure that the FAC, ELAC
R and SEC pushbutton switches are not pushed (in). The OFF legends
R are on.
R - On the overhead panel 20VU, on the ADIRS MSU, make sure that the
R three OFF/NAV/ATT selector switches are at OFF.
R (4) On the glareshield panel 13VU, on the CAPT and F/O EFIS control
R sections of the FCU, set the mode selector switch to ROSE-NAV .
R NOTE : This test is for the system 1. For the systems 2 and 3, use
____
R the indications between the parentheses.
Subtask 34-14-00-865-058
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FCU/1 9CA1 B05
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
EFF :
ALL 34-14-00
Page 520
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
**ON A/C ALL
Subtask 34-14-00-865-059
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
4. Procedure
_________
Subtask 34-14-00-869-072
A. General
NOTE : In the test that follows, we use the name DDRMI for the VOR/DME
____
RMI and the VOR/ADF/DME RMI (refer to the equipment on your
aircraft).
EFF :
ALL 34-14-00
Page 521
Nov 01/08
TAI
**ON A/C 001-050, 053-099,
Subtask 34-14-00-740-068
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to The ADIRS IRU1 (IRU2) (IRU3) page comes
the IR1 (IR2) (IR3) indication. into view.
- push the line key adjacent to The ADIRS IRU1 (IRU2) (IRU3) INTERFACE
the INTERFACE TEST indication. TEST page comes into view.
EFF :
001-050, 053-099, 34-14-00
Page 522
Nov 01/08
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
* on the DDRMI, the HDG warning flag
is no more shown,
* the CAPT (F/O) ND shows these
values:
G/S 200 Kts
WIND 030/100
HDG 15 deg.
* the DDRMI shows this value:
HDG 15 deg.
* on the ADIRS CDU, the left part of
the display window shows this track
angle true value:
00.0
The right part of the display window
shows this ground speed value:
0200
3. On the ADIRS CDU, set the DATA On the ADIRS CDU, the left part of the
DISPLAY selector switch to HDG. display window shows this true HDG
value:
010.0
4. On the MCDU, push the line key The test procedure stops.
adjacent to the RETURN TEST/STOP
indication.
6. Do the IR2 test as written in You must get the same results only on
para. 2. the F/O PFD and ND and on the ADIRS CDU
(no indication on the DDRMI).
EFF :
001-050, 053-099, 34-14-00
Page 523
Nov 01/08
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the OFF/NAV/ATT selector
switch related to the IR2 to
OFF,
9. Do the IR3 test as written in You must get the same results as for
para. 2. the IR1 on the CAPT PFD and ND, the
ADIRS CDU and the DDRMI.
Subtask 34-14-00-740-068-A
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-14-00
Page 524
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
2. On one MCDU, on the NAV page: On the MCDU:
- push the line key adjacent to The IR1 (IR2) (IR3) page comes into
the IR1 (IR2) (IR3) indication. view.
- push the line key adjacent to The IR1 (IR2) (IR3) INTERFACE TEST 1/2
the INTERFACE TEST indication. page comes into view.
- on the keyboard, push the The IR1 (IR2) (IR3) INTERFACE TEST 2/2
function key to get the page comes into view.
INTERFACE TEST 2/2 page.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page 525
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
3. On the ADIRS CDU, set the DATA On the ADIRS CDU, the left part of the
DISPLAY selector switch to HDG. display window shows this true HDG
value:
010.0
4. On the MCDU, push the line key The test procedure stops.
adjacent to the RETURN
indication.
6. Do the IR2 test as written in You must get the same results only on
para. 2. the F/O PFD and ND and on the ADIRS CDU
(no indication on the DDRMI).
9. Do the IR3 test as written in You must get the same results as for
para. 2. the IR1 on the CAPT PFD and ND, the
ADIRS CDU and the DDRMI.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-14-00
Page 526
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
10. On the ADIRS CDU, set the
OFF/NAV/ATT selector switch
related to the IR3 to OFF.
R Subtask 34-14-00-740-068-B
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R - Push the line key adjacent to The IR1 (IR2) (IR3) page comes into
R the IR1 (IR2) (IR3) indication. view.
R - Push the line key adjacent to The IR1 (IR2) (IR3) INTERFACE TEST 1/2
R the INTERFACE TEST indication. page comes into view.
R - On the keyboard, push the The IR1 (IR2) (IR3) INTERFACE TEST 2/2
R function key to get to the page comes into view.
R INTERFACE TEST 2/2 page.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 527
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R SLIP Left
R IVS -600 ft/mn.
R * On the CAPT (F/O) ND, the HDG
R warning flag is no more shown.
R * On the DDRMI, the HDG warning flag
R is no more shown.
R * The CAPT (F/O) ND shows these
R values:
R G/S 200 Kts
R WIND 030/100
R HDG 15 deg.
R * The DDRMI shows this value:
R HDG 15 deg.
R 3. On the MCDU, push the line key The test procedure stops.
R adjacent to the RETURN
R indication.
R 5. Do the IR2 test as written in You must get the same results only on
R para. 2. the F/O PFD and ND and on the ADIRS MSU
R (no indication on the DDRMI).
R
EFF :
405-499, 34-14-00
Page 528
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R ATT/HDG selector switch to
R CAPT/3.
R 8. Do the IR3 test as written in You must get the same results as for
R para. 2. the IR1 on the CAPT PFD and ND, the
R ADIRS MSU and the DDRMI.
5. Close-up
________
Subtask 34-14-00-860-051
(1) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
Subtask 34-14-00-865-060
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5CC1, 5CC2
R
EFF :
ALL 34-14-00
Page 529
Nov 01/08
TAI
**ON A/C ALL
Subtask 34-14-00-410-052
C. Close Access
(1) Install the protective cover on the battery power center 105VU.
R
EFF :
ALL 34-14-00
Page 530
Nov 01/08
TAI
**ON A/C 001-050, 053-099,
TASK 34-14-00-740-002
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-14-00-010-053
A. Get Access
(1) Put the access platform in position at the access door 822.
R
EFF :
001-050, 053-099, 34-14-00
Page 531
Feb 01/08
TAI
(3) On the battery power center 105VU:
- loosen the two screws and remove the protective cover.
Subtask 34-14-00-860-053
(2) Do the ADIRS start procedure (ADIRU related to the installed ADM
only)
(Ref. TASK 34-10-00-860-002)
Subtask 34-14-00-865-061
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FCU/1 9CA1 B05
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
121VU AUTO FLT/FCU/2 9CA2 M21
121VU ADIRS/ADIRU/2PWR/SHED 10FP N11
121VU ADIRS/ADIRU/3PWR/SWTG 9FP N10
121VU ADIRS/ADIRU/2/26VAC AND AOA 5FP2 N09
121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N08
121VU ADIRS/ADIRU/2/115VAC 4FP2 N07
121VU ADIRS/ADIRU/3/115VAC 4FP3 N06
121VU ADIRS/ADIRU/2/28VDC 6FP2 N05
121VU ADIRS/ADIRU/3/28VDC 6FP3 N04
121VU HYDRAULIC/LGCIU/SYS2 2GA Q35
121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34
R
EFF :
001-050, 053-099, 34-14-00
Page 532
Feb 01/08
TAI
Subtask 34-14-00-865-062
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
4. Procedure
_________
Subtask 34-14-00-740-064
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the ADIRS IRU1 (IRU2) (IRU3) 1/2 page
the IR1 (IR2) (IR3) indication comes into view.
(related to the removed ADM)
- push the line key adjacent to - the CURRENT STATUS page comes into
the CURRENT STATUS indication. view.
EFF :
001-050, 053-099, 34-14-00
Page 533
Feb 01/08
TAI
5. Close-up
________
Subtask 34-14-00-860-054
(1) On the center pedestal, on the MCDU, push the line key adjacent to
the RETURN indication until the MCDU MENU page comes into view.
Subtask 34-14-00-865-063
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5CC1, 5CC2
Subtask 34-14-00-410-053
C. Close Access
(1) Install the protective cover on the battery power center 105VU.
EFF :
001-050, 053-099, 34-14-00
Page 534
Feb 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
TASK 34-14-00-740-003
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-14-00-010-054
A. Get Access
(1) Put the access platform in position at the access door 822.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 535
Nov 01/08
TAI
(3) On the battery power center 105VU:
- loosen the two screws and remove the protective cover.
Subtask 34-14-00-860-059
(2) Do the ADIRS start procedure (ADIRU related to the installed ADM
only)
(Ref. TASK 34-10-00-860-002)
Subtask 34-14-00-865-064
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FCU/1 9CA1 B05
49VU L/G/LGCIU/SYS1/NORM 1GA C09
49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09
49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07
49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
121VU AUTO FLT/FCU/2 9CA2 M21
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 536
Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R **ON A/C 211-212, 215-215, 218-299, 306-399, 401-499,
Subtask 34-14-00-865-065
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FAC1/28VDC 5CC1 B04
121VU AUTO FLT/FAC2/28VDC 5CC2 M19
4. Procedure
_________
Subtask 34-14-00-740-065
NOTE : This test is for the system 1. For the systems 2 and 3, use the
____
indications between the parentheses.
The actions and the results of this procedure occur on the MCDU
used.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 537
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- Push the line key adjacent to - the IR1 (IR2) (IR3) page comes into
the IR1 (IR2) (IR3) indication view.
3. Push the line key adjacent to the - the INPUT STATUS page 1/6 comes into
INPUT STATUS indication view with the current on-the-ground
status of the IR1 (IR2) (IR3) inputs.
4. Push the NEXT PAGE function key - the related pages come into view.
to get the INPUT STATUS page 2/6
to 6/6
5. Push the line key adjacent to the - the test procedure stops.
RETURN indication
5. Close-up
________
Subtask 34-14-00-860-060
(1) On the center pedestal, on the MCDU, push the line key adjacent to
the RETURN indication until the MCDU MENU page comes into view.
Subtask 34-14-00-865-066
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5CC1, 5CC2
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 538
Nov 01/08
TAI
Subtask 34-14-00-410-054
C. Close Access
(1) Install the protective cover on the battery power center 105VU:
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-14-00
Page 539
Nov 01/08
TAI
INDICATOR - ANGLE OF ATTACK - REMOVAL/INSTALLATION
__________________________________________________
TASK 34-15-21-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
Not Applicable
3. __________
Job Set-up
4. Procedure
_________
Subtask 34-15-21-860-051
(1) On the ADIRS MSU, set the OFF/NAV/ATT selector switch to NAV to start
the ADIRU related to the AOA indicator.
(2) Make sure that the flag goes out of view and that the angle of attack
indication is 0 deg.
5. Close-up
________
EFF :
405-499, 34-15-21
Page 401
Nov 01/08
TAI
ADIRS - BITE - DESCRIPTION AND OPERATION
________________________________________
1. _______
General
R The Built in Test Equipment facilitates maintenance on in-service aircraft.
R It detects and identifies faults related to the Air Data/Inertial Reference
R System (ADIRS) and reports them to the Centralized Fault Display Interface
R Unit (CFDIU).
R The BITE is included in the following LRUs:
R - Air Data/Inertial Reference Unit (ADIRU)
R - Air Data Module (ADM)
R - Control and Display Unit (CDU).
R It is linked to the CFDIU through the ADIRU (ADR and IR portions) which
R summarizes the BITE results for its own channel
R (Ref. Fig. 001)
R .
R The ADM performs various tests to detect its own faults (watchdog timer, RAM
R addressing, ROM, CPU, RAM, NVM etc.) and failed input signals (check of
R programming pins).
R Faults are annunciated to the ADR by omission or labeling of a faulty output
R word (pressure label) and through the use of a discrete fault-code word
R output on the ARINC bus. Fault reports are also stored in a non-volatile
R memory inside the ADM.
R The IR BITE monitors: the performance of both IR NAV and IR I/O processors,
R external inputs (both digital and discrete), the functionality of the other
R internal hardware including the power supply and the inertial sensors (gyro,
R accelerometers). These BITE tests are performed either at power-up or
R continuously (Ref. Para. 3.A.(2)).
R Some tests enable to monitor operation errors. These are: Align in air,
R Excessive Motion, Latitude Sin/Cos test. They result in IR warnings but
R without fault message sent to the CFDIU. Tests and fault reactions are
R described in Para. 3.B.
R The ADR BITE monitors: the performance of the ADR processor, the
R functionality of other ADR internal hardware, the status of analog, digital
R and discrete inputs and cross-channel comparisons with the other ADRs. These
R BITE tests are performed either at power-up or continuously (Ref. Para.
R 3.A.(3)) with the exception of cross-channel comparisons which are run once
R at takeoff.
R The common BITE monitors the computer performances (INTEL 80960 processor
R and memories) with the following tests: watchdog timer, checksum, RAM
R pattern monitor.
R The ADR and IR BITEs send reports to the CFDIU through the ARINC output bus,
R on label 356. These reports memorize the faults which occurred during the
R last 63 flight legs with their context. They operate in two modes:
R - NORMAL mode: fault reporting to the CFDIU during the flight
R - INTERACTIVE mode: on the ground. Access by the MCDU MENU pages (Ref. Para.
R 3.B.).
EFF :
001-050, 053-099, 34-18-00
Page 1
Config-1 Feb 01/08
TAI
ADIRS - Interface between one ADIRU and the CFDIU
R Figure 001
EFF :
001-050, 053-099, 34-18-00
Page 2
Config-1 Feb 01/08
TAI
2. __________________
Component Location
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
1FP1 ADIRU-1 127 824 34-12-34
1FP2 ADIRU-2 128 824 34-12-34
1FP3 ADIRU-3 127 824 34-12-34
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
2FP CDU-ADIRS 20VU 211 831 34-12-12
EFF :
001-050, 053-099, 34-18-00
Page 3
Config-1 Feb 01/08
R
TAI
C. Other LRUs of the System
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
3FP1 SENSOR-ANGLE OF ATTACK, 1 127 824 34-11-19
3FP2 SENSOR-ANGLE OF ATTACK, 2 128 824 34-11-19
3FP3 SENSOR-ANGLE OF ATTACK, 3 127 824 34-11-19
11FP1 SENSOR-TAT, 1 121 34-11-18
11FP2 SENSOR-TAT, 2 122 34-11-18
9DA1 PROBE-PITOT, 1 125 812 34-11-15
9DA2 PROBE-PITOT, 2 126 822 34-11-15
9DA3 PROBE-PITOT, 3 125 812 34-11-15
7DA1 PROBE-L STATIC, 1 127 824 34-11-16
7DA2 PROBE-L STATIC, 2 127 824 34-11-16
7DA3 PROBE-L STATIC, 3 121 811 34-11-16
8DA1 PROBE-R STATIC, 1 128 824 34-11-16
8DA2 PROBE-R STATIC, 2 128 824 34-11-16
8DA3 PROBE-R STATIC, 3 122 811 34-11-16
19FP1 ADM-L TOTAL PRESSURE NONE 125 812 34-11-17
19FP2 ADM-R TOTAL PRESSURE 126 822 34-11-17
19FP3 ADM-STBY TOTAL PRESSURE 125 812 34-11-17
19FP4 ADM-R STATIC PRESSURE 128 824 34-11-17
19FP5 ADM-L STATIC PRESSURE 127 824 34-11-17
19FP6 ADM-R STATIC PRESSURE 128 824 34-11-17
19FP7 ADM-L STATIC PRESSURE 127 824 34-11-17
19FP8 ADM-STBY STATIC PRESSURE 121 811 34-11-17
EFF :
001-050, 053-099, 34-18-00
Page 4
Config-1 Feb 01/08
R
TAI
3. __________________
System Description
A. Reporting Function
Each ADIRS BITE message is described in the following pages, with the
corresponding fault description and the consequences on the system and in
the cockpit.
(1) General
- IR faults are classified as follows:
. class 1: critical faults (label 270 bit 15 = 1)
. class 2: non-critical faults (label 270 bit 19 = 1)
. class 3: faults without cockpit effects.
- ADR faults:
. class 1 faults
. class 2 faults.
NOTE : Bit 13 of ADR label 270 indicates an ADR fault (bit 13 = 1).
____
- use of i, j, k indexes in BITE messages:
. barring explicit restriction, ADIRUi stands for
ADIRU 1, ADIRU 2 or ADIRU 3
. ADMi, ADMj, or ADMk: i, j, and k values are specified below
the message.
- ECAM messages:
. xxx stands for CAPT or F/O, depending on the ADIRU
side (1 or 2)
. the letter in parentheses indicates the color used
to display the text: (A) Amber, (C) Cyan and (W) White.
EFF :
001-050, 053-099, 34-18-00
Page 5
Config-1 Feb 01/08
TAI
ADIRS BITE - Inertial Reference Faults 1/6
R Figure 002
EFF :
001-050, 053-099, 34-18-00
Page 6
Config-1 Feb 01/08
TAI
ADIRS BITE - Inertial Reference Faults 2/6
R Figure 003
EFF :
001-050, 053-099, 34-18-00
Page 7
Config-1 Feb 01/08
TAI
ADIRS BITE - Inertial Reference Faults 3/6
R Figure 004
EFF :
001-050, 053-099, 34-18-00
Page 8
Config-1 Feb 01/08
TAI
ADIRS BITE - Inertial Reference Faults 4/6
R Figure 005
EFF :
001-050, 053-099, 34-18-00
Page 9
Config-1 Feb 01/08
TAI
ADIRS BITE - Inertial Reference Faults 5/6
R Figure 006
EFF :
001-050, 053-099, 34-18-00
Page 10
Config-1 Feb 01/08
TAI
ADIRS BITE - Inertial Reference Faults 6/6
R Figure 007
EFF :
001-050, 053-099, 34-18-00
Page 11
Config-1 Feb 01/08
TAI
- NAV IRi FAULT message is displayed on the upper ECAM display
unit.
- the FAULT legend of the IR pushbutton switch on the CDU, comes
on.
- all BNR output labels are coded Failure Warning (F/W) and all
BCD labels are not transmitted.
- the SELECT ATT indication is displayed on the CDU (DATA DISPLAY
selector switch in STS position).
The IR portion can be recovered by setting the OFF/NAV/ATT
selector switch on the CDU to ATT and by applying the procedure
(level flight) to initialize the ATT mode.
EFF :
001-050, 053-099, 34-18-00
Page 12
Config-1 Feb 01/08
R
TAI
(3) Air data reference faults
R (Ref. Fig. 008, 009, 010, 011, 012)
EFF :
001-050, 053-099, 34-18-00
Page 13
Config-1 Feb 01/08
TAI
ADIRS BITE - Air Data Reference Faults 1/5
R Figure 008
EFF :
001-050, 053-099, 34-18-00
Page 14
Config-1 Feb 01/08
TAI
ADIRS BITE - Air Data Reference Faults 2/5
R Figure 009
EFF :
001-050, 053-099, 34-18-00
Page 15
Config-1 Feb 01/08
TAI
ADIRS BITE - Air Data Reference Faults 3/5
R Figure 010
EFF :
001-050, 053-099, 34-18-00
Page 16
Config-1 Feb 01/08
TAI
ADIRS BITE - Air Data Reference Faults 4/5
R Figure 011
EFF :
001-050, 053-099, 34-18-00
Page 17
Config-1 Feb 01/08
TAI
ADIRS BITE - Air Data Reference Faults 5/5
R Figure 012
R
EFF :
001-050, 053-099, 34-18-00
Page 18
Config-1 Feb 01/08
TAI
------------------------------------------------
| Parameter | Threshold |
|----------------------------------------------|
| Total pressure | 5 hPa |
| Averaged static pressure | 5 hPa |
| Left static pressure | 2 hPa |
| Right static pressure | 2 hPa |
| Angle-of-attack | 4 deg. |
| Total air temperature | 3 deg.C |
------------------------------------------------
Table 1: Comparison Thresholds
The principle of the messages is the same for other sensors (ADM,
TAT).
B. Interactive Function
(1) General
The interactive mode is activated via the SYSTEM REPORT/TEST page
related to ATA 34 chapter (Navigation) including the Air Data and
Inertial Reference System (ADIRS).
As this system includes two parts (Air Data Reference and Inertial
Reference), two interactive functions are available:
- IR interactive function
(Ref. Fig. 013)
- ADR interactive function
(Ref. Fig. 014)
.
R
EFF :
001-050, 053-099, 34-18-00
Page 19
Config-1 Nov 01/00
TAI
ADIRS BITE - Activation of IR Interactive Function
Figure 013
R
EFF :
001-050, 053-099, 34-18-00
Page 20
Config-1 Nov 01/00
TAI
ADIRS BITE - Activation of ADR Interactive Function
Figure 014
R
EFF :
001-050, 053-099, 34-18-00
Page 21
Config-1 Nov 01/00
TAI
(2) IR interactive function
(Ref. Fig. 015)
. ALIGN
. ON BAT
. DC FAIL (See note)
. FAULT
. IR OFF (See note)
. SPARE IR OUT 1 (See note)
. SPARE IR OUT 2 (See note)
- after 2 seconds
R
EFF :
001-050, 053-099, 34-18-00
Page 22
Config-1 Nov 01/00
TAI
ADIRS BITE - IR Main Menu
Figure 015
R
EFF :
001-050, 053-099, 34-18-00
Page 23
Config-1 Nov 01/00
TAI
BCD, BNR and Discrete Words are output with SSM set to
Functional Test and data set as shown in the following
tables. Annunciator discretes are de-energized to the
previously indicated status.
----------------------------------------------------------------
| | | SELF TEST VALUE |
| LABEL | PARAMETER |--------------------------|
| | | 0 to 2 s. | After 2 s. |
|--------------------------------------------------------------|
| 010 | PRESENT POSITION LAT | 188⁰88.8 | N 22⁰30.0 |
| 011 | PRESENT POSITION LONG | 188⁰88.8 | E 22⁰30.0 |
| 012 | GROUND SPEED | 6888 Kts | 200 Kts |
| 013 | TRACK ANGLE-TRUE | 688.8⁰ | 00.0⁰ |
| 014 | MAGNETIC HEADING | 688.8⁰ | 15⁰ |
| 015 | WIND SPEED | 688 Kts | 100 Kts |
| 016 | WIND DIRECTION-TRUE | 688⁰ | 30⁰ |
| 041 | SET LATITUDE | 188⁰88.8 | N 22⁰30.0 |
| 042 | SET LONGITUDE | 188⁰88.8 | E 22⁰30.0 |
| 043 | SET MAGNETIC HEADING | 688⁰ | 15⁰ |
| 044 | TRUE HEADING | 688.8⁰ | 10⁰ |
----------------------------------------------------------------
Table 2: Output BCD Words
R
EFF :
001-050, 053-099, 34-18-00
Page 24
Config-1 Nov 01/00
TAI
----------------------------------------------------------------
| LABEL | PARAMETER | SELF TEST VALUE |
|--------------------------------------------------------------|
| 052 | PITCH ANGULAR ACCEL | 5.0⁰ /s/s |
| 053 | ROLL ANGULAR ACCEL | 5.0⁰ /s/s |
| 054 | YAW ANGULAR ACCEL | 5.0⁰ /s/s |
| 310 | PRESENT POSITION LAT | N 22.50⁰ |
| 311 | PRESENT POSITION LONG | E 22.50⁰ |
| 312 | GROUND SPEED | 200 Kts |
| 313 | TRACK ANGLE-TRUE | 00.0⁰ |
| 314 | TRUE HEADING | 10.0⁰ |
| 315 | WIND SPEED | 100 Kts |
| 316 | WIND DIRECTION-TRUE | 30⁰ |
| 317 | TRACK ANGLE-MAG | 5⁰ |
| 320 | MAGNETIC HEADING | 15⁰ |
| 321 | DRIFT ANGLE | -10⁰ (Left) |
| 322 | FLIGHT PATH ANGLE | -5⁰ |
| 323 | FLIGHT PATH ACCEL | 0.02g |
| 324 | PITCH ANGLE | 5⁰ |
| 325 | ROLL ANGLE | 45⁰ (Right) |
| 326 | BODY AXIS PITCH RATE | 10⁰/s |
| 327 | BODY AXIS ROLL RATE | 10⁰/s |
| 330 | BODY AXIS YAW RATE | 10⁰/s |
| 331 | BODY LONGIT ACCEL | 0.02g |
| 332 | BODY LATERAL ACCEL | 0.10g |
| 333 | BODY NORMAL ACCEL | 0.10g |
| 334 | PLATFORM HEADING | 22.50⁰ |
| 335 | TRACK ANGLE RATE | 4.0⁰/s |
| 336 | PITCH ATT RATE | 10⁰/s |
| 337 | ROLL ATT RATE | 10⁰/s |
| 360 | POTENTIAL VERT SPEED | -600 ft/mn |
| 361 | INERTIAL ALTITUDE | 10,000 ft |
| 362 | ALONG TRACK HORIZ ACCEL | 0.02g |
| 363 | CROSS TRACK HORIZ ACCEL | 0.02g |
| 364 | VERTICAL ACCEL | 0.1g |
| 365 | INERTIAL VERT SPEED | -600 ft/mn |
| 366 | N-S VELOCITY | 200 Kts (N) |
| 367 | E-W VELOCITY | 200 Kts (E) |
----------------------------------------------------------------
Table 3: Binary Output Labels
R
EFF :
001-050, 053-099, 34-18-00
Page 25
Config-1 Nov 01/00
TAI
(3) ADR interactive function
(Ref. Fig. 016)
EFF :
001-050, 053-099, 34-18-00
Page 26
Config-1 Aug 01/07
TAI
ADIRS BITE - ADR Main Menu 1/2
Figure 016
R
EFF :
001-050, 053-099, 34-18-00
Page 27
Config-1 Nov 01/00
TAI
ADIRS BITE - ADR Main Menu 2/2
Figure 017
EFF :
001-050, 053-099, 34-18-00
Page 28
Config-1 Aug 01/07
R
TAI
ADIRS BITE - ADR Slew Tests
Figure 018
EFF :
001-050, 053-099, 34-18-00
Page 29
Config-1 Aug 01/07
R
TAI
From 10 seconds after initialization of the test mode until the
test completion is commanded, the ADR outputs are transmitted
per the following tables, outputting the fixed values specified
by these tables with an SSM coded FT (except for discrete
words). Timing tolerance is plus or minus 0.5 seconds.
EFF :
001-050, 053-099, 34-18-00
Page 30
Config-1 Feb 01/08
R
TAI
ADR Interface test values are shown in the following tables:
------------------------------------------------------------------------
| | | SELF TEST VALUE |
| LABEL | PARAMETER |--------------------------------------|
| | | 0 to 5 s | 5 to 10 s | After 10 s |
|----------------------------------------------------------------------|
| 176 | LEFT STATIC PRESSURE | Last Valid | Last Valid | 696.8 hPa |
| 177 | RIGHT STATIC PRESSURE | Last Valid | Last Valid | 696.8 hPa |
| 203 | STANDARD ALTITUDE | Last Valid | Slewed | 10,000 ft |
| 204 | BARO CORR ALT 1 | Last Valid | Slewed | 10,000 ft |
| 205 | MACH | 0 | 0 | 0.66 |
| 206 | COMPUTED AIRSPEED | 0 Kts | 0 Kts | 367.7 Kts |
| 207 | MAX ALLOWABLE AIRSPEED| Last Valid | Last Valid | Last Valid |
| 210 | TRUE AIRSPEED | 0 Kts | 0 Kts | 433 Kts |
| 211 | TOTAL AIR TEMP | Last Valid | Last Valid | 35⁰C |
| 212 | ALTITUDE RATE | Last Valid | 600 ft/mn | 0 ft/mn |
| 213 | STATIC AIR TEMP | Last Valid | Last Valid | 10.3⁰C |
| 215 | IMPACT PRESSURE | Last Valid | Last Valid | 236.6 hPa |
| 220 | BARO CORR ALT 2 | Last Valid | Slewed | 10,000 ft |
| 221 | IND ANGLE OF ATTACK | NOTE 1 | NOTE 1 | 5⁰ |
| 241 | CORCTD ANGLE OF ATTACK| NOTE 1 | NOTE 1 | 5⁰ |
| 242 | TOTAL PRESSURE | Last Valid | Last Valid | 933.4 hPa |
| 245 | UNCRCTD AVG STAT PRESS| Last Valid | Last Valid | 696.8 hPa |
| 246 | CORCTD AVG STAT PRESS | Last Valid | Last Valid | 696.8 hPa |
| 251 | BARO CORR ALT 3 | Last Valid | Slewed | 10,000 ft |
------------------------------------------------------------------------
EFF :
001-050, 053-099, 34-18-00
Page 31
Config-1 Feb 01/08
R
TAI
--------------------------------------------------------------------------
| | | SELF TEST VALUE |
| LABEL | PARAMETER |----------------------------------------|
| | | 0 to 5 s | 5 to 10 s | After 10 s |
|------------------------------------------------------------------------|
| 034 | BARO CORR (hPa) 3 |Not Transmit.| Last Valid | 1013.3 hPa |
| 035 | BARO CORR (in.Hg) 3 |Not Transmit.| Last Valid | 29.92 in.Hg |
| 230 | TRUE AIRSPEED |Not Transmit.| 0 Kts | 433 Kts |
| 231 | TOTAL AIR TEMP |Not Transmit.| Last Valid | 35 ⁰C |
| 233 | STATIC AIR TEMP |Not Transmit.| Last Valid | 10 ⁰C |
| 234 | BARO CORR (hPa) 1 |Not Transmit.| Last Valid | 1013.3 hPa |
| 235 | BARO CORR (in.Hg) 1 |Not Transmit.| Last Valid | 29.92 in.Hg |
| 236 | BARO CORR (hPa) 2 |Not Transmit.| Last Valid | 1013.3 hPa |
| 237 | BARO CORR (in.Hg) 2 |Not Transmit.| Last Valid | 29.92 in.Hg |
--------------------------------------------------------------------------
Output BCD Words
--------------------------------------------------------------------------
| | | SELF TEST VALUE |
| LABEL | BIT - PARAMETER |----------------------------------------|
| | | 0 to 5 s | 5 to 10 s | After 10 s |
|------------------------------------------------------------------------|
| 270 | 13 - ADR FAULT | 1 | 0 | 0 |
| 270 | 19 - OVERSPEED WARNING| 0 | 0 | 1 |
| 271 | 13 - LOW SPD WARN 1 | 0 | 0 | 1 |
| 271 | 14 - LOW SPD WARN 2 | 0 | 0 | 1 |
| 271 | 15 - LOW SPD WARN 3 | 0 | 0 | 1 |
| 271 | 16 - LOW SPD WARN 4 | 1 | 1 | 0 |
--------------------------------------------------------------------------
Output Discretes Words
--------------------------------------------------------------------------
| | SELF TEST VALUE |
| PARAMETER |----------------------------------------|
| | 0 to 5 s | 5 to 10 s | After 10 s |
|------------------------------------------------------------------------|
| LOW SPEED WARNING 1 | OPEN | OPEN | GROUND |
| LOW SPEED WARNING 2 | OPEN | OPEN | GROUND |
| LOW SPEED WARNING 3 | OPEN | OPEN | OPEN |
| LOW SPEED WARNING 4 | GROUND | GROUND | OPEN |
| OVERSPEED WARNING | OPEN | OPEN | GROUND |
| ADR FAULT | GROUND | OPEN | OPEN |
| ADR OFF | GROUND | OPEN | OPEN |
--------------------------------------------------------------------------
Discrete Outputs
R
EFF :
001-050, 053-099, 34-18-00
Page 32
Config-1 Feb 01/08
TAI
(f) ALT DYNAMIC SLEW TEST
(Ref. Fig. 017, 018)
The activation of the ALT DYNAMIC SLEW TEST causes the ADR to
output a simulated ramp of altitude (label 203) between low and
high altitude limits specified by the operator. These limits, as
well as the slew rate, are entered by the operator by means of
the MCDU keyboard.
The altitude limit values are tested to be within -2000 and
+50,000 ft. The altitude lower limit is tested to be less than
the altitude upper limit. The altitude slew rate is tested to be
within 1 to +20,000 ft/mn.
EFF :
001-050, 053-099, 34-18-00
Page 33
Config-1 Nov 01/03
TAI
R (2) Progress of power-up tests
R (a) Duration: 5 s
EFF :
001-050, 053-099, 34-18-00
Page 34
Config-1 Nov 01/03
TAI
**ON A/C ALL
1. General
_______
EFF :
ALL 34-18-00
Page 1
Config-2 Nov 01/08
TAI
ADIRS - Interface between one ADIRU and the CFDIU
Figure 001
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 2
Config-2 Nov 01/08
TAI
The ADR BITE monitors:
- the performance of the ADR processor
- the functionality of other ADR internal hardware
- the status of analog, digital and discrete inputs
- cross-channel comparisons with the other ADRs.
These BITE tests are performed either at power-up or continuously (Ref.
Para. 3.A.(3)) with the exception of cross-channel comparisons which are
run once at takeoff.
The common BITE monitors the computer performances (INTEL 80960 processor
and memories) with the following tests: watchdog timer, checksum, RAM
pattern monitor.
The ADR and IR BITEs send reports to the CFDIU through the ARINC output
bus, on label 356. These reports memorize the faults which occurred during
the last 63 flight legs with their context. They operate in two modes:
- NORMAL mode: fault reporting to the CFDIU during the flight
- INTERACTIVE mode: on the ground. Access by the MCDU MENU pages (Ref. Para.
3.B.).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 3
Config-2 Nov 01/08
TAI
R ADIRS - Interface between one ADIRU and the CFDIU
R Figure 001A
R
EFF :
405-499, 34-18-00
Page 4
Config-2 Nov 01/08
TAI
R Some tests enable to monitor operation errors. These are: Align in air,
R Excessive Motion, Latitude Sin/Cos test. They result in IR warnings but
R without fault message sent to the CFDIU. Tests and fault reactions are
R described in Para. 3.B.
R The ADR BITE monitors: the performance of the ADR processor, the
R functionality of other ADR internal hardware, the status of analog, digital
R and discrete inputs and cross-channel comparisons with the other ADRs. These
R BITE tests are performed either at power-up or continuously (Ref. Para.
R 3.A.(3)) with the exception of cross-channel comparisons which are run once
R at takeoff.
R The common BITE monitors the computer performances (INTEL 80960 processor
R and memories) with the following tests : watchdog timer, checksum, RAM
R pattern monitor.
R The ADR and IR BITEs send reports to the CFDIU through the ARINC output bus,
R on label 356. These reports memorize the faults which occurred during the
R last 63 flight legs with their context. They operate in two modes:
R - NORMAL mode: fault reporting to the CFDIU during the flight
R - INTERACTIVE mode: on the ground. Access by the MCDU MENU pages (Ref. Para.
R 3.B.).
2. __________________
Component Location
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
1FP1 ADIRU-1 127 824 34-12-34
1FP2 ADIRU-2 128 824 34-12-34
1FP3 ADIRU-3 127 824 34-12-34
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
2FP CDU-ADIRS 20VU 211 831 34-12-12
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 5
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R -------------------------------------------------------------------------------
R | FIN | FUNCTIONAL DESIGNATION | PANEL | ZONE | ACCESS | ATA |
R | | | | | DOOR | REF. |
R |-----------------------------------------------------------------------------|
R | 41VU | MSU-ADIRS | 41VU | 211 | | |
R -------------------------------------------------------------------------------
R
EFF :
405-499, 34-18-00
Page 6
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
3FP1 SENSOR-ANGLE OF ATTACK, 1 127 824 34-11-19
3FP2 SENSOR-ANGLE OF ATTACK, 2 128 824 34-11-19
3FP3 SENSOR-ANGLE OF ATTACK, 3 127 824 34-11-19
11FP1 SENSOR-TAT, 1 121 34-11-18
11FP2 SENSOR-TAT, 2 122 34-11-18
9DA1 PROBE-PITOT, 1 125 812 34-11-15
9DA2 PROBE-PITOT, 2 126 822 34-11-15
9DA3 PROBE-PITOT, 3 125 812 34-11-15
7DA1 PROBE-L STATIC, 1 127 824 34-11-16
7DA2 PROBE-L STATIC, 2 127 824 34-11-16
7DA3 PROBE-L STATIC, 3 121 811 34-11-16
8DA1 PROBE-R STATIC, 1 128 824 34-11-16
8DA2 PROBE-R STATIC, 2 128 824 34-11-16
8DA3 PROBE-R STATIC, 3 122 811 34-11-16
19FP1 ADM-L TOTAL PRESSURE NONE 125 812 34-11-17
19FP2 ADM-R TOTAL PRESSURE 126 822 34-11-17
19FP3 ADM-STBY TOTAL PRESSURE 125 812 34-11-17
19FP4 ADM-R STATIC PRESSURE 128 824 34-11-17
19FP5 ADM-L STATIC PRESSURE 127 824 34-11-17
19FP6 ADM-R STATIC PRESSURE 128 824 34-11-17
19FP7 ADM-L STATIC PRESSURE 127 824 34-11-17
19FP8 ADM-STBY STATIC PRESSURE 121 811 34-11-17
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 7
Config-2 Nov 01/08
TAI
3. __________________
System Description
A. Reporting Function
Each ADIRS BITE message is described in the following pages, with the
corresponding fault description and the consequences on the system and in
the cockpit.
(1) General
- IR and ADR faults are classified as follows:
. class 1: faults with cockpit effect
. class 2: non-critical faults
. class 3: minor faults without cockpit effects.
- use of indexes in BITE messages:
ADIRUi stands for ADIRU 1, ADIRU 2 or ADIRU 3.
- ECAM messages:
. xxx stands for CAPT or F/O, depending on the ADIRU side (1 or 2)
. the letter in parentheses indicates the color used to display the
text: (A) Amber, (C) Cyan and (W) White.
- IR FAULT:
the FAULT legend of the IR pushbutton switch flashes in NAV mode
and is steady in ATT mode.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 8
Config-2 Nov 01/08
TAI
ADIRS BITE - Inertial Reference System - Class 1 Internal Faults 1/5
Figure 002
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 9
Config-2 Nov 01/08
TAI
R ADIRS BITE - Inertial Reference System - Class 1 Internal Faults 1/5
R Figure 002A
R
EFF :
405-499, 34-18-00
Page 10
Config-2 Nov 01/08
TAI
ADIRS BITE - Inertial Reference System - Class 1 Internal Faults 2/5
Figure 003
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 11
Config-2 Nov 01/08
TAI
R ADIRS BITE - Inertial Reference System - Class 1 Internal Faults 2/5
R Figure 003A
R
EFF :
405-499, 34-18-00
Page 12
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 13
Config-2 Nov 01/08
TAI
ADIRS BITE - Inertial Reference System - Class 1 Internal Faults 3/5
Figure 004
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 14
Config-2 Nov 01/08
TAI
R ADIRS BITE - Inertial Reference System - Class 1 Internal Faults 3/5
R Figure 004A
R
EFF :
405-499, 34-18-00
Page 15
Config-2 Nov 01/08
TAI
ADIRS BITE - Inertial Reference System - Class 1 Internal Faults 4/5
Figure 005
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 16
Config-2 Nov 01/08
TAI
R ADIRS BITE - Inertial Reference System - Class 1 Internal Faults 4/5
R Figure 005A
R
EFF :
405-499, 34-18-00
Page 17
Config-2 Nov 01/08
TAI
ADIRS BITE - Inertial Reference System - Class 1 Internal Faults 5/5
Figure 006
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 18
Config-2 Nov 01/08
TAI
R ADIRS BITE - Inertial Reference System - Class 1 Internal Faults 5/5
R Figure 006A
R
EFF :
405-499, 34-18-00
Page 19
Config-2 Nov 01/08
TAI
ADIRS BITE - Inertial Reference System - Class 1 External Faults
Figure 007
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 20
Config-2 Nov 01/08
TAI
R ADIRS BITE - Inertial Reference System - Class 1 External Faults
R Figure 007A
R
EFF :
405-499, 34-18-00
Page 21
Config-2 Nov 01/08
TAI
ADIRS BITE - Inertial Reference System - Class 3 Faults
Figure 008
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 22
Config-2 Nov 01/08
TAI
R **ON A/C 202-202, 211-212, 215-215, 218-226, 301-307,
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 23
Config-2 Feb 01/09
TAI
ADIRS BITE - Inertial Reference System - Class 3 Faults
Figure 008A
R
EFF : 001-050, 053-099, 202-202, 211-212,
215-215, 218-226, 301-307,
34-18-00
Page 24
Config-2 Feb 01/09
TAI
ADIRS BITE - Inertial Reference System - Class 2 Internal Faults
Figure 009
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 25
Config-2 Nov 01/08
TAI
R ADIRS BITE - Inertial Reference System - Class 2 Internal Faults
R Figure 009A
R
EFF :
405-499, 34-18-00
Page 26
Config-2 Nov 01/08
TAI
(b) Position-entry test
- Initial position (latitude, longitude) must compare within one
degree of the last computed latitude and longitude from the
previous flight. If a miscompare exists, then the NOT ALIGN
message is displayed on the upper ECAM display unit with a text
indicating to enter again the initial position (Ref. 34-14
Para. 3.). The miscompare is removed if the new entered
position is identical to the previous one or is within the
one-degree threshold. If not, the system waits for other
position entry.
- At the end of the alignment submode, the IR portion compares
the initial latitude to a self-computed latitude. The test
fails and the NOT ALIGN message is displayed on the upper ECAM
display unit with action to enter again the position, when:
. the cosine of entered latitude differs from the cosine of computed latitude
by more than 0.01234 or
. the sine of entered latitude differs from the sine of computed latitude by
more than 0.01234.
The miscompare is removed if a subsequent entry of latitude
passes the test. If the sin/cos test fails two times with
identical initial latitude entries, the IR system goes in a
fault reaction: IR FAULT warning message on the upper ECAM
display unit and FAULT legend on the CDU on, invalid outputs.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 27
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R
EFF :
405-499, 34-18-00
Page 28
Config-2 Nov 01/08
TAI
R (c) Test on motion
R If taxiing or towing causes a step input which exceeds 0.11 ft/s
R in the X or Y velocity, the align process is stopped with a
R message on the upper ECAM display unit indicating IR NOT ALIGN
R and excessive motion (Ref. 34-14). The status matrix of the
R attitude data (pitch, roll, heading) is set at NCD which implies
R a flag on the PFD.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 29
Config-2 Nov 01/08
TAI
ADIRS BITE - Air Data Reference System - Class 1 Internal Faults 1/4
Figure 010
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-18-00
Page 30
Config-2 Nov 01/08
TAI
ADIRS BITE - Air Data Reference System - Class 1 Internal Faults 1/4
Figure 010A
R
EFF :
231-299, 314-399, 34-18-00
Page 31
Config-2 Nov 01/08
TAI
R ADIRS BITE - Air Data Reference System - Class 1 Internal Faults 1/4
R Figure 010B
R
EFF :
405-499, 34-18-00
Page 32
Config-2 Nov 01/08
TAI
ADIRS BITE - Air Data Reference System - Class 1 Internal Faults 2/4
Figure 011
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 33
Config-2 Nov 01/08
TAI
R ADIRS BITE - Air Data Reference System - Class 1 Internal Faults 2/4
R Figure 011A
R
EFF :
405-499, 34-18-00
Page 34
Config-2 Nov 01/08
TAI
ADIRS BITE - Air Data Reference System - Class 1 Internal Faults 3/4
Figure 012
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 35
Config-2 Nov 01/08
TAI
R ADIRS BITE - Air Data Reference System - Class 1 Internal Faults 3/4
R Figure 012A
R
EFF :
405-499, 34-18-00
Page 36
Config-2 Nov 01/08
TAI
ADIRS BITE - Air Data Reference System - Class 1 Internal Faults 4/4
Figure 013
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 37
Config-2 Nov 01/08
TAI
R ADIRS BITE - Air Data Reference System - Class 1 Internal Faults 4/4
R Figure 013A
R
EFF :
405-499, 34-18-00
Page 38
Config-2 Nov 01/08
TAI
ADIRS BITE - Air Data Reference System - Class 2 Faults
Figure 014
R
EFF : 201-203, 211-212, 215-215, 218-230,
301-313, 401-404,
34-18-00
Page 39
Config-2 Nov 01/08
TAI
ADIRS BITE - Air Data Reference System - Class 2 Faults
Figure 014A
R
EFF :
231-299, 314-399, 34-18-00
Page 40
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 41
Config-2 Nov 01/08
TAI
R ADIRS BITE - Air Data Reference System - Class 2 Faults
R Figure 014B
R
EFF :
405-499, 34-18-00
Page 42
Config-2 Nov 01/08
TAI
ADIRS BITE - Air Data Reference System - Class 1 External Faults
Figure 015
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 43
Config-2 Nov 01/08
TAI
R ADIRS BITE - Air Data Reference System - Class 1 External Faults
R Figure 015A
R
EFF :
405-499, 34-18-00
Page 44
Config-2 Nov 01/08
TAI
ADIRS BITE - Air Data Reference System - Class 3 Faults
Figure 016
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 45
Config-2 Nov 01/08
TAI
R In this last case, detection of the fault leads to the ADR FAULT
R annunciation (message on the upper ECAM display unit; FAULT
R legend on the MSU) associated to invalid outputs.
R A number of messages can be sent to the CFDIU on the label 356
R according to the detected miscompare. These messages point the
R ADIRU or ADM pin program or a mix of them:
R
R 341117 ADMi (19FPi) (i = 1, 2 or 3)
R 341117 ADMi (19FPi)/ADMj(19FPj) (i,j) = (1,5), (2,7) or (3,8)
R 341234 WRG: SDI PIN PROG/ADIRUi (1FPi)
R 341234 WRG: SDI PIN PROG/ADMi (19FPi)/ADIRUi (1FPi)
R 341234 WRG: SDI PIN PROG/ADMj (19FPj)/ADIRUi (1FPi) (i,j) =
R (1,5), (2,7) or (3,8).
R 341234 WRG: SDI PIN PROG/ADMi/j ADIRUi (1FPi) (19FPi/j) (i,j) =
R (1,5), (2,7) or (3,8).
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 46
Config-2 Nov 01/08
TAI
------------------------------------------------
| Parameter | Threshold |
|----------------------------------------------|
| Total pressure | 5 hPa |
| Averaged static pressure | 5 hPa |
| Left static pressure | 2 hPa |
| Right static pressure | 2 hPa |
| Angle-of-attack | 4⁰ |
| Total air temperature | 3⁰C |
------------------------------------------------
Table 1 : Comparison Thresholds
The principle of the messages is the same for other sensors (ADM,
TAT).
B. Interactive Function
(1) General
The interactive mode is activated via the SYSTEM REPORT/TEST page
related to ATA 34 chapter (Navigation) including the Air Data and
Inertial Reference System (ADIRS).
As this system includes two parts (Air Data Reference and Inertial
Reference), two interactive functions are available:
- IR interactive function
(Ref. Fig. 017)
- ADR interactive function.
(Ref. Fig. 018)
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 47
Config-2 Nov 01/08
TAI
ADIRS BITE - Activation of IR Interactive Function
Figure 017
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 48
Config-2 Nov 01/08
TAI
ADIRS BITE - Activation of ADR Interactive Function
Figure 018
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 49
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 50
Config-2 Nov 01/08
TAI
ADIRS BITE - IR Main Menu 1/7
Figure 019
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 51
Config-2 Nov 01/08
TAI
ADIRS BITE - IR Main Menu 2/7
Figure 020
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 52
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
. ALIGN
. ON BAT
. DC FAIL (See nota)
. IR FAULT
. IR OFF (See nota)
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 53
Config-2 Nov 01/08
TAI
ADIRS BITE - IR Main Menu 3/7
Figure 021
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 54
Config-2 Nov 01/08
TAI
ADIRS BITE - IR Main Menu 4/7
Figure 022
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 55
Config-2 Nov 01/08
TAI
ADIRS BITE - IR Main Menu 5/7
Figure 023
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 56
Config-2 Nov 01/08
TAI
. SPARE IR OUT 1 (See nota)
. SPARE IR OUT 2 (See nota)
- after 2 seconds
BCD, BNR and Discrete Words are output with SSM set to
Functional Test and data set as shown in the following tables.
Annunciator discretes are de-energized to the previously
indicated status.
----------------------------------------------------------------
| | | SELF TEST VALUE |
| LABEL | PARAMETER |--------------------------|
| | | 0 to 2 s. | After 2 s. |
|--------------------------------------------------------------|
| 010 | PRESENT POSITION LAT | 188⁰88.8 | N 22⁰30.0 |
| 011 | PRESENT POSITION LONG | 188⁰88.8 | E 22⁰30.0 |
| 012 | GROUND SPEED | 6888 Kts | 200 Kts |
| 013 | TRACK ANGLE-TRUE | 688.8⁰ | 00.0⁰ |
| 014 | MAGNETIC HEADING | 688.8⁰ | 15⁰ |
| 015 | WIND SPEED | 688 Kts | 100 Kts |
| 016 | WIND DIRECTION-TRUE | 688⁰ | 30⁰ |
| 041 | SET LATITUDE | 188⁰88.8 | N 22⁰30.0 |
| 042 | SET LONGITUDE | 188⁰88.8 | E 22⁰30.0 |
| 043 | SET MAGNETIC HEADING | 688⁰ | 15⁰ |
| 044 | TRUE HEADING | 688.8⁰ | 10⁰ |
----------------------------------------------------------------
Table 2 : Output BCD Words
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 57
Config-2 Nov 01/08
TAI
----------------------------------------------------------------
| LABEL | PARAMETER | SELF TEST VALUE |
|--------------------------------------------------------------|
| 052 | PITCH ANGULAR ACCEL | 5.0⁰/s/s |
| 053 | ROLL ANGULAR ACCEL | 5.0⁰/s/s |
| 054 | YAW ANGULAR ACCEL | 5.0⁰/s/s |
| 076 | GPS ALTITUDE | 10,000 ft |
| 101 | GPS HDOP | 4.0 |
| 102 | GPS VDOP | 3.0 |
| 103 | GPS TRACK ANGLE | 0.0⁰ |
| 110 | GPS LATITUDE | N 22.50⁰ |
| 111 | GPS LONGITUDE | E 22.50⁰ |
| 112 | GPS GROUND SPEED | 200 kts |
| 120 | GPS LATITUDE FINE | N 00.00⁰ |
| 121 | GPS LONGITUDE FINE | E 00.00⁰ |
| 125 | UTC TIME | 12:00:00 |
| 130 | GPS HORIZ INTEGRITY LIM | 10.0 NM |
| 131 | HYBRID HORIZ INTEGRITY | 5.0 NM |
| | LIMIT | |
| 132 | HYBRID TRUE HEADING | 10⁰ |
| 135 | HYBRID VERTICAL FOM | 300 ft |
| 136 | GPS VERTICAL FOM | 100 ft |
| 137 | HYBRID TRACK ANGLE | 0.0⁰ |
| 143 | TERMINAL AREA HIL | 0.8 NM |
| 150 | UTC | 12:00:00 |
| 162 | DESTINATION ETA | 06:30:00 |
| 163 | ALT WAYPOINT ETA | 06:35:00 |
| 165 | GPS VERTICAL VELOCITY | -600 ft/mn |
| 166 | GPS N/S VELOCITY | 200 kts |
| 174 | GPS E/W VELOCITY | 200 kts |
| 175 | HYBRID GROUND SPEED | 200 kts |
| 247 | GPS HORIZONTAL FOM | 6.0 NM |
| 254 | HYBRID LATITUDE | N 22.50⁰ |
| 255 | HYBRID LONGITUDE | E 22.50⁰ |
| 256 | HYBRID LATITUDE FINE | N 00.00⁰ |
| 257 | HYBRID LONGITUDE FINE | E 00.00⁰ |
| 260 | DATE | 1/1/99 |
| 261 | HYBRID ALTITUDE | 10,000 ft |
| 263 | HYBRID FLIGHT PATH ANGLE| -5.0⁰ |
| 264 | HYBRID HORIZONTAL FOM | 7.0 NM |
| 266 | HYBRID N/S VELOCITY | 200 kts |
| 267 | HYBRID E/W VELOCITY | 200 Kts |
| 310 | PRESENT POSITION LAT | N 22.50⁰ |
| 311 | PRESENT POSITION LONG | E 22.50⁰ |
| 312 | GROUND SPEED | 200 Kts |
| 313 | TRACK ANGLE-TRUE | 00.0⁰ |
| 314 | TRUE HEADING | 10.0⁰ |
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 58
Config-2 Nov 01/08
TAI
----------------------------------------------------------------
| LABEL | PARAMETER | SELF TEST VALUE |
|--------------------------------------------------------------|
| 315 | WIND SPEED | 100 Kts |
| 316 | WIND DIRECTION-TRUE | 30⁰ |
| 317 | TRACK ANGLE-MAG | 5⁰ |
| 320 | MAGNETIC HEADING | 15⁰ |
| 321 | DRIFT ANGLE | -10⁰ (Left) |
| 322 | FLIGHT PATH ANGLE | -5⁰ |
| 323 | FLIGHT PATH ACCEL | 0.02g |
| 324 | PITCH ANGLE | 5⁰ |
| 325 | ROLL ANGLE | 45⁰ (Right) |
| 326 | BODY AXIS PITCH RATE | 10⁰/s |
| 327 | BODY AXIS ROLL RATE | 10⁰/s |
| 330 | BODY AXIS YAW RATE | 10⁰/s |
| 331 | BODY LONGIT ACCEL | 0.02g |
| 332 | BODY LATERAL ACCEL | 0.10g |
| 333 | BODY NORMAL ACCEL | 0.10g |
| 334 | PLATFORM HEADING | 22.50⁰ |
| 335 | TRACK ANGLE RATE | 4.0⁰/s |
| 336 | PITCH ATT RATE | 10⁰/s |
| 337 | ROLL ATT RATE | 10⁰/s |
| 340 | TRACK ANGLE GRID | 10⁰ |
| 341 | GRID HEADING | 20⁰ |
| 343 | DESTINATION HIL | 1.0 NM |
| 345 | HYBRID VERTICAL VELOCITY| -600 ft/mn |
| 347 | ALT WAYPOINT HIL | 2.0 NM |
| 360 | POTENTIAL VERT SPEED | -600 ft/mn |
| 361 | INERTIAL ALTITUDE | 10,000 ft |
| 362 | ALONG TRACK HORIZ ACCEL | 0.02g |
| 363 | CROSS TRACK HORIZ ACCEL | 0.02g |
| 364 | VERTICAL ACCEL | 0.1g |
| 365 | INERTIAL VERT SPEED | -600 ft/mn |
| 366 | N-S VELOCITY | 200 Kts (N) |
| 367 | E-W VELOCITY | 200 Kts (E) |
----------------------------------------------------------------
Table 3 : Binary Output Labels
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 59
Config-2 Nov 01/08
TAI
ADIRS BITE - IR Main Menu 6/7
Figure 024
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 60
Config-2 Nov 01/08
TAI
ADIRS BITE - IR Main Menu 7/7
Figure 025
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 61
Config-2 Nov 01/08
TAI
(3) ADR interactive function
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 62
Config-2 Nov 01/08
TAI
ADIRS BITE - ADR Main Menu 1/8
Figure 026
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 63
Config-2 Nov 01/08
TAI
ADIRS BITE - ADR Main Menu 2/8
Figure 027
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 64
Config-2 Nov 01/08
TAI
ADIRS BITE - ADR Main Menu 3/8
Figure 028
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 65
Config-2 Nov 01/08
TAI
ADIRS BITE - ADR Main Menu 4/8
Figure 029
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 66
Config-2 Nov 01/08
TAI
ADIRS BITE - ADR Main Menu 5/8
Figure 030
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 67
Config-2 Nov 01/08
TAI
The text displayed describes the various steps of the interface
test; when you push the line key adjacent to the START TEST
indication, the following test sequence is run:
- 0-5 seconds: Failure Warning Test
For 0-5 seconds after initiation of the test mode, the ADR
outputs are transmitted per the following tables. Since this is
the failure warning test period, the BCD output parameters are
not transmitted and the SSM of the BNR parameters are set to
F/W. Timing tolerance is plus or minus 0.5 seconds.
- 5-10 seconds: Altitude Ramp Test
For 5-10 seconds after initiation of the test mode, the ADR
outputs are transmitted per the following tables with an SSM
coded FT (except for discrete words). Since this is the
altitude ramp test period, the altitude outputs are slewed in a
positive direction for the entire 5-second period at a rate of
600 ft/mn, starting at the ambient computed altitude. Timing
tolerance is plus or minus 0.5 seconds.
- 10 second until test completion: Fixed Output Test
From 10 seconds after initialization of the test mode until the
test completion is commanded, the ADR outputs are transmitted
per the following tables, outputting the fixed values specified
by these tables with an SSM coded FT (except for discrete
words). Timing tolerance is plus or minus 0.5 seconds.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 68
Config-2 Nov 01/08
TAI
ADR Interface test values are shown in the following tables:
------------------------------------------------------------------------
| | | SELF TEST VALUE |
| LABEL | PARAMETER |--------------------------------------|
| | | 0 to 5 s | 5 to 10 s | After 10 s |
|----------------------------------------------------------------------|
| 176 | LEFT STATIC PRESSURE | Last Valid | Last Valid | 696.8 hPa |
| 177 | RIGHT STATIC PRESSURE | Last Valid | Last Valid | 696.8 hPa |
| 203 | STANDARD ALTITUDE | Last Valid | Slewed | 10,000 ft |
| 204 | BARO CORR ALT 1 | Last Valid | Slewed | 10,000 ft |
| 205 | MACH | 0 | 0 | 0.66 |
| 206 | COMPUTED AIRSPEED | 0 Kts | 0 Kts | 367.7 Kts |
| 207 | MAX ALLOWABLE AIRSPEED| Last Valid | Last Valid | Last Valid |
| 210 | TRUE AIRSPEED | 0 Kts | 0 Kts | 433 Kts |
| 211 | TOTAL AIR TEMP | Last Valid | Last Valid | 35⁰C |
| 212 | ALTITUDE RATE | Last Valid | 600 ft/mn | 0 ft/mn |
| 213 | STATIC AIR TEMP | Last Valid | Last Valid | 10.3⁰C |
| 215 | IMPACT PRESSURE | Last Valid | Last Valid | 236.6 hPa |
| 220 | BARO CORR ALT 2 | Last Valid | Slewed | 10,000 ft |
| 221 | IND ANGLE OF ATTACK | NOTE 1 | NOTE 1 | 5⁰ |
| 241 | CORCTD ANGLE OF ATTACK| NOTE 1 | NOTE 1 | 5⁰ |
| 242 | TOTAL PRESSURE | Last Valid | Last Valid | 933.4 hPa |
| 245 | UNCRCTD AVG STAT PRESS| Last Valid | Last Valid | 696.8 hPa |
| 246 | CORCTD AVG STAT PRESS | Last Valid | Last Valid | 696.8 hPa |
| 251 | BARO CORR ALT 3 | Last Valid | Slewed | 10,000 ft |
------------------------------------------------------------------------
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 69
Config-2 Nov 01/08
TAI
--------------------------------------------------------------------------
| | | SELF TEST VALUE |
| LABEL | PARAMETER |----------------------------------------|
| | | 0 to 5 s | 5 to 10 s | After 10 s |
|------------------------------------------------------------------------|
| 034 | BARO CORR (hPa) 3 |Not Transmit.| 745.0 hpa | 1013.3 hPa |
| 035 | BARO CORR (in.Hg) 3 |Not Transmit.| 22.0 in.Hg | 29.92 in.Hg |
| 230 | TRUE AIRSPEED |Not Transmit.| 0 Kts | 433 Kts |
| 231 | TOTAL AIR TEMP |Not Transmit.| Last Valid | 35 ⁰C |
| 233 | STATIC AIR TEMP |Not Transmit.| Last Valid | 10 ⁰C |
| 234 | BARO CORR (hPa) 1 |Not Transmit.| Last Valid | 1013.3 hPa |
| 235 | BARO CORR (in.Hg) 1 |Not Transmit.| Last Valid | 29.92 in.Hg |
| 236 | BARO CORR (hPa) 2 |Not Transmit.| Last Valid | 1013.3 hPa |
| 237 | BARO CORR (in.Hg) 2 |Not Transmit.| Last Valid | 29.92 in.Hg |
--------------------------------------------------------------------------
Output BCD Words
--------------------------------------------------------------------------
| | | SELF TEST VALUE |
| LABEL | BIT - PARAMETER |----------------------------------------|
| | | 0 to 5 s | 5 to 10 s | After 10 s |
|------------------------------------------------------------------------|
| 270 | 13 - ADR FAULT | 1 | 0 | 0 |
| 270 | 19 - OVERSPEED WARNING| 0 | 0 | 1 |
| 271 | 13 - LOW SPD WARN 1 | 0 | 0 | 1 |
| 271 | 14 - LOW SPD WARN 2 | 0 | 0 | 1 |
| 271 | 15 - LOW SPD WARN 3 | 0 | 0 | 0 |
| 271 | 16 - LOW SPD WARN 4 | 1 | 1 | 0 |
--------------------------------------------------------------------------
Output Discretes Words
--------------------------------------------------------------------------
| | SELF TEST VALUE |
| PARAMETER |----------------------------------------|
| | 0 to 5 s | 5 to 10 s | After 10 s |
|------------------------------------------------------------------------|
| LOW SPEED WARNING 1 | OPEN | OPEN | GROUND |
| LOW SPEED WARNING 2 | OPEN | OPEN | GROUND |
| LOW SPEED WARNING 3 | OPEN | OPEN | OPEN |
| LOW SPEED WARNING 4 | GROUND | GROUND | OPEN |
| OVERSPEED WARNING | OPEN | OPEN | GROUND |
| ADR FAULT | GROUND | OPEN | OPEN |
| ADR OFF | GROUND | OPEN | OPEN |
--------------------------------------------------------------------------
Discrete Outputs
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 70
Config-2 Nov 01/08
TAI
(i) ALT DYNAMIC SLEW (OUTPUT TESTS menu/SLEW TESTS submenu)
(Ref. Fig. 029, 030)
The activation of the ALT DYNAMIC SLEW test causes the ADR to
output a simulated ramp of altitude (label 203) between low and
high altitude limits specified by the operator. These limits, as
well as the slew rate, are entered by the operator by means of
the MCDU keyboard.
The altitude limit values are tested to be within -2000 and
+50,000 ft. The altitude lower limit is tested to be less than
the altitude upper limit. The altitude slew rate is tested to be
within 1 to +20,000 ft/mn.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 71
Config-2 Nov 01/08
TAI
ADIRS BITE - ADR Main Menu 6/8
Figure 031
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 72
Config-2 Nov 01/08
TAI
ADIRS BITE - ADR Main Menu 7/8
Figure 032
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 73
Config-2 Nov 01/08
TAI
ADIRS BITE - ADR Main Menu 8/8
Figure 033
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-18-00
Page 74
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-299, 301-399, 401-404,
(a) Duration: 5 s
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-404,
34-18-00
Page 75
Config-2 Nov 01/08
TAI
R **ON A/C 405-499,
R (a) Duration: 5 s
EFF :
405-499, 34-18-00
Page 76
Config-2 Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-211, 215-215, 218-222, 224-228,
R 301-311, 401-403,
R Post SB 34-1330 For A/C 001-050,053-099,201-203,211-211,215-215,218-222,
R 224-228,301-311,401-403,
R Post SB 34-1350 For A/C 001-050,201-203,211-211,215-215,218-222,224-228,
R 301-311,401-403,
R
EFF : 001-050, 053-099, 201-203, 211-211,
215-215, 218-222, 224-228, 301-311, 401-403,
34-18-00
Page 1
Config-3 Feb 01/09
TAI
ADIRS BITE - ADR System - Class 1 Internal Faults 7/8
Figure 001
R
EFF : 001-050, 053-099, 201-203, 211-211,
215-215, 218-222, 224-228, 301-307,
34-18-00
Page 2
Config-3 Feb 01/09
TAI
ADIRS BITE - ADR System - Class 2 Internal Faults
Figure 002
R
EFF : 001-050, 053-099, 201-203, 211-211,
215-215, 218-222, 224-228, 301-311, 401-403,
34-18-00
Page 3
Config-3 Feb 01/09
TAI
ADIRS BITE - ADR System - Class 3 Faults
Figure 003
R
EFF : 001-050, 201-203, 211-211, 215-215,
218-222, 224-228, 301-311, 401-403,
34-18-00
Page 4
Config-3 Feb 01/09
TAI
INTENTIONALLY BLANK
R
34-18-00
Page 5
Config-3 Nov 01/07
TAI
ADIRS BITE - IR Main Menu 3/3
Figure 004 (SHEET 1)
R
EFF : 001-050, 053-099, 201-203, 211-211,
215-215, 218-222, 224-228, 301-307,
34-18-00
Page 6
Config-3 Feb 01/09
TAI
ADIRS BITE - IR Main Menu 3/3
Figure 004 (SHEET 2)
R
EFF : 001-050, 053-099, 201-203, 211-211,
215-215, 218-222, 224-228, 301-307,
34-18-00
Page 7
Config-3 Feb 01/09
TAI
STANDBY NAVIGATION SYSTEMS - ADJUSTMENT/TEST
____________________________________________
TASK 34-20-00-710-001
ISIS Reset
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
Not Applicable
3. __________
Job Set-up
Subtask 34-20-00-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU STBY/INST 5FN F12
4. Procedure
_________
Subtask 34-20-00-710-050
(1) On the panel 49VU, open the NAV/STBY/HORIZON circuit breaker for more
than 5 seconds then close it.
(2) After some seconds, on the ISIS Indicator, the INIT page comes into
view.
5. Close-up
________
R
EFF :
223-299, 306-399, 401-499, 34-20-00
Page 501
Aug 01/07
TAI
STANDBY DATA : ALTITUDE AND AIRSPEED - DESCRIPTION AND OPERATION
________________________________________________________________
1. _______
General
One standby airspeed indicator and one standby altimeter are directly
connected to the standby pitot and static sources. Each indicator is
contained in a 2 ATI case (ARINC 408) and installed on the center instrument
panel. The standby circuit can be drained by means of a water drain.
2. __________________
Component Location
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
3FN ALTM-STANDBY 4VU 211 831 34-21-22
9FN IND-STANDBY AIRSPEED 4VU 211 831 34-21-26
15FN ALTIMETER-METRIC 4VU 211 831 34-21-25
3. __________________
System Description
A. Standby Altimeter
The standby altimeter is supplied with static pressure by the standby air
data system to indicate the barometric altitude of the aircraft in feet.
The barometric altitude is displayed by means of:
- a pointer (4) performing one revolution of the dial for 1000 feet
- a display counter (5) made up of two drums displaying respectively the
tens of thousands and the thousands of feet.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 1
Nov 01/08
TAI
Standby Data - Altitude and Airspeed - Component Location
Figure 001
R
EFF :
001-050, 053-099, 201-203, 34-21-00
Page 2
Nov 01/07
TAI
Standby Data - Altitude and Airspeed - Component Location
Figure 001A
R
EFF :
211-212, 215-215, 218-222, 301-304, 34-21-00
Page 3
Nov 01/08
TAI
Standby Data - Altitude and Airspeed - Pneumatic Circuit
Figure 002
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 4
Nov 01/08
TAI
Standby Data - Altitude and Airspeed - Electrical Circuit
Figure 003
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 5
Nov 01/08
TAI
Standby Data - Altitude and Airspeed - Data Indication
Figure 004
R
EFF :
001-050, 053-099, 201-203, 34-21-00
Page 6
Nov 01/07
TAI
When the altitude is below 10,000 feet, the figure zero of the left
drum is replaced by black and white stripes. The figure nine is
replaced by an orange fire stripped zone.
The altitude dial (6) is calibrated from 0 to 1000 feet with 20 feet
graduations
- the baro correction (2) is displayed on a counter graduated in inches
of mercury
- a knob (1) located at the L corner of the indicator enables the display
of the reference baro correction in the range of 22.20 to 31.02 in.Hg
- four manually adjustable white bugs (3) are provided for manual
altitude setting.
To improve accuracy, 28VDC supplies the internal vibrator of the
standby altimeter through a landing gear relay.
In straight and level flight, with the internal vibrator operating, the
standby altimeter gives the following accuracy:
plus or minus 20 ft. at sea level
plus or minus 40 ft. at 6000 ft.
plus or minus 80 ft. at 10,000 ft.
plus or minus 130 ft. at 20,000 ft.
plus or minus 205 ft. at 35,000 ft.
NOTE : On the ground, with the internal vibrator not supplied, the above
____
figures may be plus or minus 300ft.
Integral lighting supplied with external 5VAC is provided to
illuminate the presentation.
A. Standby Altimeter
The standby altimeter is supplied with static pressure by the standby air
data system to indicate the barometric altitude of the aircraft in feet.
The barometric altitude is displayed by means of:
- a pointer (4) performing one revolution of the dial for 1000 feet
- a display counter (5) made up of two drums displaying respectively the
tens of thousands and the thousands of feet.
When the altitude is below 10,000 feet, the figure zero of the left
drum is replaced by black and white stripes. The figure nine is
replaced by an orange fire stripped zone.
the altitude dial (6) is calibrated from 0 to 1000 feet with 20 feet
graduations
- the baro correction (2) is displayed on a counter graduated in hecto
Pascal
- a knob (1) located at the L corner of the indicator enables the display
of the reference baro correction in the range of 750 to 1050 hPa.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 7
Nov 01/08
TAI
Standby Data - Altitude and Airspeed - Data Indication
Figure 004A
R
EFF :
211-212, 215-215, 218-222, 301-304, 34-21-00
Page 8
Nov 01/08
TAI
- four manually adjustable white bugs (3) are provided for manual
altitude setting.
To improve accuracy, 28VDC supplies the internal vibrator of the
standby altimeter through a landing gear relay.
In straight and level flight, with the internal vibrator operating, the
standby altimeter gives the following accuracy:
plus or minus 20 ft. at sea level
plus or minus 40 ft. at 6000 ft.
plus or minus 80 ft. at 10,000 ft.
plus or minus 130 ft. at 20,000 ft.
plus or minus 205 ft. at 35,000 ft.
NOTE : On the ground, with the internal vibrator not supplied, the above
____
figures may be plus or minus 300ft.
Integral lighting supplied with external 5VAC is provided to
illuminate the presentation.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 9
Nov 01/08
TAI
STANDBY DATA : ALTITUDE AND AIRSPEED - ADJUSTMENT/TEST
______________________________________________________
TASK 34-21-00-790-001
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR INJURE PERSONS.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______
CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
AUTOMATIC MOVEMENT OF THE FLIGHT CONTROL SURFACES CAN BE DANGEROUS
AND/OR CAUSE DAMAGE.
CAUTION : OBEY THESE PRECAUTIONS WHEN YOU DO THE TEST TO PREVENT DAMAGE TO
_______
INSTRUMENTS:
- THE PRESSURES SET MUST NOT BE MORE THAN 1050 hPa (31 in Hg) OR LESS
THAN 115 hPa (3.39 in Hg)
- CHANGES IN STATIC PRESSURE MUST NOT BE MORE THAN 6000 FEET/MINUTE
- DO NOT SUDDENLY OPEN LINES TO AMBIENT AIR WHILE THE PRESSURE
GENERATOR IS CONNECTED.
CAUTION : THE TOTAL PRESSURE IN THE PITOT SYSTEM MUST NEVER BE LESS THAN THE
_______
STATIC PRESSURE. THE DIFFERENCE BETWEEN THE PITOT AND THE STATIC
PRESSURE CIRCUITS MUST NEVER BE MORE THAN 368 hPa (10.86 in Hg).
1. __________________
Reason for the Job
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 501
Nov 01/08
TAI
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-21-00-860-056
Subtask 34-21-00-865-050
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 502
Feb 01/09
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
Subtask 34-21-00-865-052
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/STBY/ALTM 16FN F14
Subtask 34-21-00-420-050
(1) Remove the slip on covers from the static probe and the pitot probe
of the standby system.
R (2) Connect the GENERATOR - GROUND PRESSURE MINI. 100 MB to one standby
R static probe with the STATIC PORT ADAPTER (98D34003500100) from the
R ADAPTER COVER-STATIC PORT (98D34003500000).
(3) Connect the ground pressure generator to the standby pitot probe with
the ADAPTOR-CHARGING,PITOT PROBE.
CAUTION : WHEN YOU SEAL THE DRAIN HOLE IN THE PITOT PROBE, DO NOT
_______
SEAL THE HOLE DIRECTLY WITH THE COLORED ADHESIVE TAPE.
ALWAYS PUT A PIECE OF PLASTIC ON THE HOLE FIRST AND USE THE
COLORED ADHESIVE TAPE TO ATTACH THE PLASTIC.
IF YOU SEAL THE DRAIN HOLE DIRECTLY WITH THE ADHESIVE TAPE,
THERE IS A RISK THAT SOME OF THE ADHESIVE WILL STAY ON THE
HOLE AND COLLECT PARTICLES. THIS CAN SUBSEQUENTLY CAUSE
BLOCKAGE OF THE HOLE AND THUS INCORRECT OPERATION OF THE
PROBE.
(a) Seal the drain holes of the standby pitot probe with a piece of
plastic and colored adhesive tape of very bright color.
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 503
Feb 01/09
TAI
(b) Seal the opposite standby static probe with a piece of plastic
(see CAUTION above) and with the STATIC PORT COVER
(98D34003500103) from the ADAPTER COVER-STATIC PORT
R (98D34003500000).
(5) Move the vane of the AOA sensor 3 to the upper position. Keep the
vane in position with colored adhesive tape.
Subtask 34-21-00-420-050-A
(1) Remove the slip on covers from the static probe and the pitot probe
of the standby system.
R (2) Connect the GENERATOR - GROUND PRESSURE MINI. 100 MB to one standby
R static probe with the STATIC PORT ADAPTER (98D34003500100) from the
R ADAPTER COVER-STATIC PORT (98D34003500000).
(3) Connect the ground pressure generator to the standby pitot probe with
the ADAPTOR-CHARGING,PITOT PROBE.
(4) Seal the opposite standby static probe with a piece of plastic and
R with the STATIC PORT COVER (98D34003500103) from the ADAPTER COVER-
R STATIC PORT (98D34003500000).
(5) Move the vane of the AOA sensor 3 to the upper position. Maintain the
vane in position with colored adhesive tape.
Subtask 34-21-00-860-058
(1) Do the EIS start procedure (PFD only) (Ref. TASK 31-60-00-860-001).
(2) Make sure that the flaps are in the fully retracted position
(Ref. TASK 27-50-00-866-009).
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 504
Feb 01/09
TAI
(3) On the ADIRS CDU, set the OFF/NAV/ATT selector switches to NAV.
4. Procedure
_________
Subtask 34-21-00-790-050-D
A. Leak Test
NOTE : You can do the test below for a static pressure of 691.4 hPa or
____
20,41 in.Hg and an impact pressure of 59 hPa or 1,74 in.Hg (or a
total pressure of 750.4 hPa or 22,16 in.Hg) but it is less
accurate.
On the SWITCHING panel 8VU, set the AIR DATA selector switch to
CAPT/3 (or F/O/3) position.
Make sure that:
- the CAPT (or F/O) PFD shows 10,237 ft +/- 30 ft and 190 kts +/-
3 kts,
- the standby altimeter and the standby airspeed indicator show
10,201 ft +/- 83 ft and 189 kts +/- 5 kts.
After 5 minutes:
- the change of altitude must not be more than 370 ft.
- the change of speed must not be more than 10 Kts.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
2. On the SWITCHING panel 8VU, set On the CAPT (or F/O) PFD, the
the AIR DATA selector switch to indications from ADIRU3 are shown.
CAPT/3 (or F/O/3) position.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 505
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
pressure of 641,8 hPa or 18.95
in.Hg.).
5. On the ground pressure generator: The rate of descent must not be more
- slowly balance the pressure in than 6000 ft/mn.
the standby static and pitot
circuits and open the
electrovalves to get
atmospheric pressure.
Subtask 34-21-00-790-050-C
A. Leak Test
NOTE : You can do the test below for a static pressure of 691.4 hPa and
____
an impact pressure of 59 hPa (or a total pressure of 750.4 hPa)
but it is less accurate.
On the SWITCHING panel 8VU, set the AIR DATA selector switch to
CAPT/3 (or F/O/3) position.
Make sure that:
- the CAPT (or F/O) PFD shows 10,237 ft +/- 30 ft and 190 kts +/-
3 kts,
- the standby altimeter and the standby airspeed indicator show
10,201 ft +/- 83 ft and 189 kts +/- 5 kts.
After 5 minutes:
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222,
34-21-00
Page 506
Nov 01/08
TAI
- the change of altitude must not be more than 370 ft.
- the change of speed must not be more than 10 Kts.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
2. On the SWITCHING panel 8VU, set On the CAPT (or F/O) PFD, the
the AIR DATA selector switch to indications from ADIRU3 are shown.
CAPT/3 (or F/O/3) position.
5. On the ground pressure generator: The rate of descent must not be more
- slowly balance the pressure in than 6000 ft/mn.
the standby static and pitot
circuits and open the
electrovalves to get
atmospheric pressure.
R
EFF :
211-212, 215-215, 218-222, 34-21-00
Page 507
Nov 01/08
TAI
**ON A/C 301-304,
Subtask 34-21-00-790-050-B
R A. Leak Test
NOTE : You can do the test below for a static pressure of 691 hPa and an
____
impact pressure of 59.3 hPa (or a total pressure of 750.3 hPa) but
it is less accurate.
On the SWITCHING panel 8VU, set the AIR DATA selector switch to
CAPT/3 (or F/O/3) position.
Make sure that:
- the CAPT (or F/O) PFD shows 10,177 ft +/- 30 ft and 188 kts +/-
3 kts,
R - the standby altimeter and the standby airspeed indicator show
R 10,216 ft +/- 83 ft and 189 kts +/- 5 kts.
After 5 minutes:
- the change of altitude must not be more than 370 ft.
- the change of speed must not be more than 10 Kts.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
2. On the SWITCHING panel 8VU, set On the CAPT (or F/O) PFD, the
the AIR DATA selector switch to indications from ADIRU3 are shown.
CAPT/3 (or F/O/3) position.
R
EFF :
301-304, 34-21-00
Page 508
Aug 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- make sure that the change of altitude
is not more than 500 ft.
After 10 minutes :
- make sure that the change of speed is
not more than 20 Kts.
5. On the ground pressure generator: The rate of descent must not be more
- slowly balance the pressure in than 6000 ft/mn.
the standby static and pitot
circuits and open the
electrovalves to get
atmospheric pressure.
5. Close-up
________
Subtask 34-21-00-020-050
(2) Remove the adaptors from the standby static probe and the standby
pitot probe.
(3) Remove the cover from the opposite standby static probe.
(4) Remove the piece of plastic and colored adhesive tape from the drain
holes of the standby pitot probe.
(5) Remove adhesive tape from the vane of the AOA sensor 3.
(6) Install the slip on covers on the standby static probe and the
standby pitot probe.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 509
Nov 01/08
TAI
R **ON A/C 001-050, 201-203, 211-212, 215-215, 218-222, 301-304,
Subtask 34-21-00-020-050-A
(2) Remove the adaptors from the standby static probe and the standby
pitot probe.
(3) Remove the cover from the opposite standby static probe.
(4) Remove the piece of plastic from the opposite standby static probe.
(5) Remove adhesive tape from the vane of the AOA sensor 3.
(6) Install the slip on covers on the standby static probe and the
standby pitot probe.
Subtask 34-21-00-865-051
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
Subtask 34-21-00-860-057
(1) On the SWITCHING panel 8VU, set the AIR DATA selector switch to NORM
position
(2) Do the EIS stop procedure (PFD only) (Ref. TASK 31-60-00-860-002).
(3) On the ADIRS CDU, set the OFF/NAV/ATT selector switches to OFF.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 510
Nov 01/08
TAI
(4) Do a reset of each ELAC:
- on the panel 49VU, open then close the ELAC1 circuit breaker,
- on the panel 121VU, open then close the ELAC2 circuit breaker.
(6) Make sure that the work area is clean and clear of tool(s) and other
items.
(7) Make sure that the drain holes on the pitot probes are not blocked by
unwanted materials (Ref. TASK 34-11-15-200-001).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 511
Nov 01/08
TAI
TASK 34-21-00-720-001
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-21-00-860-050
(1) Drain the standby air data system (Ref. TASK 12-24-34-600-001).
(2) Remove the slip on covers from the standby static probes and the
R standby pitot probe and connect the GENERATOR - GROUND PRESSURE MINI.
R 100 MB to :
- the L or R standby static probe with the ADAPTER COVER-STATIC PORT
(98D34003500100).
- the standby pitot probe with the ADAPTOR-CHARGING,PITOT PROBE.
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 512
Feb 01/09
TAI
(3) Seal the Standby probes:
CAUTION : WHEN YOU SEAL THE DRAIN HOLE IN THE PITOT PROBE, DO NOT
_______
SEAL THE HOLE DIRECTLY WITH THE COLORED ADHESIVE TAPE.
ALWAYS PUT A PIECE OF PLASTIC ON THE HOLE FIRST AND USE THE
COLORED ADHESIVE TAPE TO ATTACH THE PLASTIC.
IF YOU SEAL THE DRAIN HOLE DIRECTLY WITH THE ADHESIVE TAPE,
THERE IS A RISK THAT SOME OF THE ADHESIVE WILL STAY ON THE
HOLE AND COLLECT PARTICLES. THIS CAN SUBSEQUENTLY CAUSE
BLOCKAGE OF THE HOLE AND THUS INCORRECT OPERATION OF THE
PROBE.
(a) Seal the drain holes of the pitot probe with the piece of plastic
and colored adhesive tape of very bright color.
(b) Seal the opposite standby static probe with the piece of plastic
(see CAUTION above) and with the STATIC PORT COVER
(98D34003500103) from the ADAPTER COVER-STATIC PORT..
(4) Precautions
CAUTION : THE TOTAL PRESSURE IN THE PITOT SYSTEM MUST NEVER BE LESS
_______
THAN THE STATIC PRESSURE. THE DIFFERENCE BETWEEN THE PITOT
AND THE STATIC PRESSURE CIRCUITS MUST NEVER BE MORE THAN
368 hPa (10.86 in Hg).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 513
Nov 01/08
TAI
**ON A/C 001-050, 201-203, 211-212, 215-215, 218-222, 301-304,
Subtask 34-21-00-860-050-A
(1) Drain the standby air data system (Ref. TASK 12-24-34-600-001).
(2) Remove the slip on covers from the standby static probes and the
R standby pitot probe and connect the GENERATOR - GROUND PRESSURE MINI.
R 100 MB to :
- the L or R standby static probe with the ADAPTER COVER-STATIC PORT
(98D34003500100).
- the standby pitot probe with the ADAPTOR-CHARGING,PITOT PROBE.
(3) Seal the opposite standby static probe with the piece of plastic and
with the STATIC PORT COVER (98D34003500103) from the ADAPTER COVER-
STATIC PORT..
(4) Precautions
CAUTION : THE TOTAL PRESSURE IN THE PITOT SYSTEM MUST NEVER BE LESS
_______
THAN THE STATIC PRESSURE. THE DIFFERENCE BETWEEN THE PITOT
AND THE STATIC PRESSURE CIRCUITS MUST NEVER BE MORE THAN
368 hPa (10.86 in Hg).
EFF : 001-050, 201-203, 211-212, 215-215,
218-222, 301-304,
34-21-00
Page 514
Feb 01/09
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-222, 301-304,
Subtask 34-21-00-865-056
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
4. Procedure
_________
Subtask 34-21-00-720-050
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set a static pressure of 571.8 hPa - the pointer shows 300 Kts (+ or - 5
(15,000 ft) Kts).
- set an impact pressure of 153.5
hPa (300 Kts).
- set a static pressure of 843 hPa - the pointer shows 180 Kts (+ or - 5
(5000 ft) Kts).
- set an impact pressure of 53.5 hPa
(180 Kts).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 515
Nov 01/08
TAI
5. Close-up
________
Subtask 34-21-00-860-051
(1) On the ground pressure generator, slowly decrease the pressure until
you get atmospheric pressure.
(4) Remove the adaptors from the standby static probes and the standby
pitot probe.
(5) Remove the cover from the opposite standby static probe.
(6) Remove the piece of plastic from the opposite standby static probe.
(7) Remove the piece of plastic and colored adhesive tape from the drain
holes of the standby pitot probe.
(8) Install the slip on covers on the standby static probes and the
standby pitot probe.
Subtask 34-21-00-860-051-A
(1) On the ground pressure generator, slowly decrease the pressure until
you get atmospheric pressure.
(4) Remove the adaptors from the standby static probes and the standby
pitot probe.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 516
Nov 01/08
TAI
(5) Remove the cover from the opposite standby static probe.
(6) Remove the piece of plastic from the opposite standby static probe.
(7) Install the slip on covers on the standby static probes and the
standby pitot probe.
Subtask 34-21-00-865-057
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 517
Nov 01/08
TAI
TASK 34-21-00-720-002
1. __________________
Reason for the Job
To make sure that the standby altimeter and the metric altimeter operate
correctly with information from the ground pressure generator.
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 518
Feb 01/09
TAI
3. __________
Job Set-up
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
Subtask 34-21-00-860-052
(2) Take the applicable safety precautions before you open the LGCIU
circuit breakers
(Ref. TASK 32-00-00-860-001).
(3) Precautions
CAUTION : THE TOTAL PRESSURE IN THE PITOT SYSTEM MUST NEVER BE LESS
_______
THAN THE STATIC PRESSURE. THE DIFFERENCE BETWEEN THE PITOT
AND THE STATIC PRESSURE CIRCUITS MUST NEVER BE MORE THAN
368 hPa (10.86 in Hg).
(4) Remove the slip on covers from the L and R static probes 7DA3 and
8DA3 of the standby system.
R (5) Connect the GENERATOR - GROUND PRESSURE MINI. 100 MB to one standby
static probe with the ADAPTER COVER-STATIC PORT (98D34003500100).
(6) Seal the opposite standby static probe with the COVER-STATIC PROBE
(98D34003500103).
(7) Start the ground pressure generator and set a static pressure of 1013
mb.
(8) Drain the standby air data system (Ref. TASK 12-24-34-600-001).
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 519
Feb 01/09
TAI
Subtask 34-21-00-865-053
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
121VU HYDRAULIC/LGCIU/SYS2 2GA Q35
121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34
Subtask 34-21-00-865-054
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/STBY/ALTM 16FN F14
4. Procedure
_________
Subtask 34-21-00-720-051
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
2. On the ground pressure generator: - Make sure that the standby altimeter
- set a static pressure of 977.1 indicates 1000 ft (+ or - 20 ft).
hPa (1000 ft).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 520
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- Set a static pressure of 908.1 - Make sure that the standby altimeter
hPa (3000 ft). indicates 3000 ft (+ or - 30 ft).
- Set a static pressure of 843 - make sure that the standby altimeter
hPa (5000 ft). indicates 5000 ft (+ or - 40 ft).
- set a static pressure of 571.8 - make sure that the standby altimeter
hPa (15,000 ft). indicates 15,000 ft (+ or - 110 ft).
- set a static pressure of 314.8 - make sure that the standby altimeter
hPa (29,000 ft). indicates 29,000 ft (+ or - 190 ft).
Subtask 34-21-00-720-051-A
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
2. On the ground pressure generator: - Make sure that the standby altimeter
- set a static pressure of 977.1 indicates 1000 ft (+ or - 20 ft).
hPa (1000 ft).
- Set a static pressure of 908.1 - Make sure that the standby altimeter
hPa (3000 ft). indicates 3000 ft (+ OR - 30 ft).
- Set a static pressure of 843 - make sure that the standby altimeter
hPa (5000 ft). indicates 5000 ft (+ or - 40 ft).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 521
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set a static pressure of 571.8 - make sure that the standby altimeter
hPa (15,000 ft). indicates 15,000 ft (+ or - 110ft).
- set a static pressure of 314.8 - make sure that the standby altimeter
hPa (29,000 ft). indicates 29,000 ft (+ or - 190 ft).
5. Close-up
________
Subtask 34-21-00-860-054
(3) Remove the cover from the opposite standby static probe.
(5) Close the LGCIU circuit breakers and put the aircraft back to its
inertial cofiguration (Ref. TASK 32-00-00-860-002).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 522
Nov 01/08
TAI
Subtask 34-21-00-865-055
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU L/G/LGCIU/SYS1/NORM 1GA C09
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
121VU HYDRAULIC/LGCIU/SYS2 2GA Q35
121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-00
Page 523
Nov 01/08
TAI
ALTIMETER - STANDBY (3FN) - REMOVAL/INSTALLATION
________________________________________________
TASK 34-21-22-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-22
Page 401
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-222, 301-304,
3. __________
Job Set-up
Subtask 34-21-22-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/STBY/ALTM 16FN F14
122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04
Subtask 34-21-22-010-050
4. Procedure
_________
Subtask 34-21-22-020-050
(2) Push the screws (1) to release the standby altimeter (2) from the
clamp.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-22
Page 402
Nov 01/08
TAI
Standby Altimeter
Figure 401/TASK 34-21-22-991-001
R
EFF :
001-050, 053-099, 201-203, 34-21-22
Page 403
Nov 01/07
TAI
Standby Altimeter
Figure 401A/TASK 34-21-22-991-001-B
R
EFF :
211-212, 215-215, 218-222, 301-304, 34-21-22
Page 404
Nov 01/08
TAI
(5) Disconnect the quick-disconnect coupling (5).
(7) Put blanking caps on the disconnected electrical connectors (4) and
(6).
(8) Put blanking plugs on the disconnected line ends (3) and (5).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-22
Page 405
Nov 01/08
TAI
TASK 34-21-22-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-22
Page 406
Nov 01/08
TAI
3. __________
Job Set-up
Subtask 34-21-22-865-051
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/STBY/ALTM 16FN F14
122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04
Subtask 34-21-22-010-051
4. Procedure
_________
Subtask 34-21-22-420-050
(3) Remove the blanking plugs from the line ends (3) and (5).
(4) Make a loop of the flexible hose and connect the quick-disconnect
coupling (5) to the receptacle (3) of the standby altimeter (2).
(Ref. Fig. 402/TASK 34-21-22-991-002)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-22
Page 407
Nov 01/08
TAI
Connection of the Quick-disconnect coupling
Figure 402/TASK 34-21-22-991-002
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-22
Page 408
Nov 01/08
TAI
(5) Make sure that you can see the blue ring on the quick-disconnect
coupling.
(7) Remove the blanking caps from the electrical connectors (4) and (6).
(8) Connect the electrical connector (6) to the receptacle (4) of the
standby altimeter (2).
(10) Look behind the standby altimeter and make sure that the position of
the flexible hoses (static pressure line) is satisfactory (no
crushing, kinks, creases or folds).
Subtask 34-21-22-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
16FN, 4LF
Subtask 34-21-22-710-050
5. Close-up
________
Subtask 34-21-22-410-050
A. Close Access
(3) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-22
Page 409
Nov 01/08
TAI
ALTIMETER - STANDBY (3FN) - ADJUSTMENT/TEST
___________________________________________
TASK 34-21-22-820-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-21-22-869-050
A. Not Applicable
4. Procedure
_________
Subtask 34-21-22-020-053
Subtask 34-21-22-820-050
Subtask 34-21-22-420-053
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-22
Page 501
Nov 01/08
TAI
INDICATOR - STANDBY AIRSPEED (9FN) - REMOVAL/INSTALLATION
_________________________________________________________
TASK 34-21-26-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-26
Page 401
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-222, 301-304,
3. __________
Job Set-up
Subtask 34-21-26-865-053
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04
Subtask 34-21-26-010-050
4. Procedure
_________
Subtask 34-21-26-020-050
(2) Push the screws (1) to release the standby airspeed indicator (2).
(3) Disengage the standby airspeed indicator (2) from its housing.
(5) Disconnect the red and green quick-disconnect couplings (5) from the
connectors (4).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-26
Page 402
Nov 01/08
TAI
Standby Airspeed Indicator
Figure 401/TASK 34-21-26-991-001
R
EFF :
001-050, 053-099, 201-203, 34-21-26
Page 403
Nov 01/07
TAI
Standby Airspeed Indicator
Figure 401A/TASK 34-21-26-991-001-A
R
EFF :
211-212, 215-215, 218-222, 301-304, 34-21-26
Page 404
Nov 01/08
TAI
(6) Remove the standby airspeed indicator (2).
(7) Put blanking caps on the disconnected electrical connectors (3) and
(6).
(8) Put blanking plugs on the disconnected line ends (4) and (5).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-26
Page 405
Nov 01/08
TAI
TASK 34-21-26-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-21-26-865-054
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-26
Page 406
Nov 01/08
TAI
Subtask 34-21-26-010-051
4. Procedure
_________
Subtask 34-21-26-420-050
(3) Remove the blanking plugs from the line ends (4) and (5).
(5) Make sure that you can see the blue ring on the quick-disconnect
couplings.
(7) Remove the blanking caps from the electrical connectors (3) and (6).
(8) Make sure that the electrical connectors are clean and in the correct
condition.
(9) Connect the electrical connector (6) to the receptacle (3) of the
standby airspeed indicator (2).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-26
Page 407
Nov 01/08
TAI
Illustration of the Quick-disconnect coupling
Figure 402/TASK 34-21-26-991-002
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-26
Page 408
Nov 01/08
TAI
(10) Install the standby airspeed indicator (2) in its housing.
(11) Look behind the standby airspeed indicator and make sure that the
position of the flexible hoses (static and total pressure lines) is
satisfactory (no crushing, kinks, creases or folds).
Subtask 34-21-26-865-055
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
4LF
Subtask 34-21-26-710-050
5. Close-up
________
Subtask 34-21-26-410-050
(3) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-26
Page 409
Nov 01/08
TAI
INDICATOR - STANDBY AIRSPEED (9FN) - ADJUSTMENT/TEST
____________________________________________________
TASK 34-21-26-820-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-21-26-020-053
4. Procedure
_________
Subtask 34-21-26-820-050
5. Close-up
________
Subtask 34-21-26-420-053
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-21-26
Page 501
Nov 01/08
TAI
STANDBY DATA : ATTITUDE AND HEADING - DESCRIPTION AND OPERATION
_______________________________________________________________
1. General
_______
A. Standby Heading
The standby heading is performed by a magnetic compass that is an
independent instrument which provides the flight crew with the A/C
magnetic heading.
It is installed on the top of the windshield center post and allows a
check of the heading provided by the main sources of the heading system.
It acts in standby when these systems are inoperative.
B. Standby Attitude
The standby attitude is performed by a gyroscopic horizon that is an
independent instrument which provides the flight crew, with a constant
indication of the aircraft attitude. It is contained in a 3 ATIs case and
installed on the center instrument panel. It allows a check of the
attitude provided by the main sources of attitude system. It acts in
standby when these systems are inoperative.
2. __________________
Component Location
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
2FN COMPASS-STANDBY 211 831 34-22-23
7FN IND-STANDBY HORIZON 4VU 211 831 34-22-24
3. __________________
System Description
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-22-00
Page 1
Config-1 Nov 01/08
TAI
Standby Data - Attitude and Heading - Component Location
Figure 001
R
EFF :
001-050, 053-099, 201-203, 301-302, 34-22-00
Page 2
Config-1 Nov 01/07
TAI
Standby Data - Attitude and Heading - Component Location
Figure 001A
R
EFF :
211-212, 215-215, 218-222, 303-304, 34-22-00
Page 3
Config-1 Nov 01/08
TAI
**ON A/C 001-050, 053-099, 201-203, 301-302,
A. Standby Compass
The standby compass consists of a magnetic element rotating inside a
compass bowl, immersed in a damping liquid. The magnetic element (1) is
linked to a graduated compass card which moves against a lubber line (2)
and gives the magnetic heading.
Below the viewing window are two apertures (4) marked N.S and E.W,
allowing to achieve compensation by positioning the two small magnetized
bars (compensator).
Above the viewing window is a non-magnetic lamp (3) assembly which
provides illumination of the compass card.
A. Standby Compass
The standby compass consists of a magnetic element rotating inside a
compass bowl, immersed in a damping liquid. The magnetic element (1) is
linked to a graduated compass card which moves against a lubber line (2)
and gives the magnetic heading.
Above the viewing window are two apertures (4) marked B (E.W) and C (N.S)
, allowing to achieve compensation by positioning the two small
magnetized bars (compensator).
Below the viewing window is a non-magnetic lamp (3) assembly which
provides illumination of the compass card.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-22-00
Page 4
Config-1 Nov 01/08
TAI
Standby Data - Attitude and Heading - Electrical Circuit
Figure 002
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-22-00
Page 5
Config-1 Nov 01/08
TAI
Standby Data - Attitude and Heading - Data Indicating
Figure 003
R
EFF :
001-050, 053-099, 201-203, 301-302, 34-22-00
Page 6
Config-1 Nov 01/07
TAI
Standby Data - Attitude and Heading - Data Indicating
Figure 003A
R
EFF :
211-212, 215-215, 218-222, 303-304, 34-22-00
Page 7
Config-1 Nov 01/08
TAI
The external gimbal controls the roll rotation. The roll gimbal has
unrestricted 360 degrees rotation around the roll axis.
The gyro pin axis is maintained in the vertical position by the erection
system (unstable pendulum erector) which is removed when the rotor axis
deviates more than 9 degrees plus or minus 2 degrees. The accuracy of the
vertical position in clean configuration is less than 0.5 degree. The
fast resetting of the gyroscopic horizon can be activated by pulling the
knob (8) located in the lower R corner of the indicator.
The indicator provides the following information :
- roll angle,
- pitch angle,
- instrument failure (RED flag).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-22-00
Page 8
Config-1 Nov 01/08
TAI
__________________________________________________________
STANDBY DATA : INTEGRATED STANDBY INSTRUMENT SYSTEM (ISIS)
DESCRIPTION AND OPERATION
_________________________
1. General
_______
A. ISIS Indicator
The Integrated Standby Instrument System (ISIS) indicator replaces the
three conventional standby instruments:
- the standby altimeter
- the standby horizon indicator
- the standby airspeed indicator.
It is located on the center instrument panel.
B. Standby Compass
The standby heading is given by a magnetic compass that is an independent
instrument which provides the flight crew with the A/C magnetic heading.
It is installed on the top of the windshield center post and allows a
check of the heading provided by the main sources of the heading system.
It acts in standby when these systems are inoperative.
2. Component
__________________
Location
(Ref. Fig. 001)
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
2FN COMPASS-STANDBY 210 831 34-22-23
22FN IND-ISIS 401VU 211 34-22-25
3. __________________
System Description
A. ISIS Indicator
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 1
Config-2 May 01/05
TAI
ISIS - Component Location
Figure 001
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 2
Config-2 May 01/05
TAI
ISIS Indicator - Initialization Display
Figure 002
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 3
Config-2 May 01/05
TAI
If aircraft motion is detected, the attitude information is flagged
and a yellow ATT:RST flag with a red ATT flag are displayed at
the end of the initialization phase
(Ref. Fig. 003)
Pressing the RST pushbutton switch more than 2 seconds then
restarts the initialization phase.
The display also shows the baro reference. Baro reference can be
set during the initialization phase.
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 4
Config-2 May 01/05
TAI
ISIS Indicator - Excessive motion during the initialization phase.
Figure 003
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 5
Config-2 May 01/05
TAI
ISIS Indicator - Airspeed Display
Figure 004
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 6
Config-2 May 01/05
TAI
ISIS Indicator - Altitude Display
Figure 005
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 7
Config-2 May 01/05
TAI
This tape moves up and down with respect to a window surrounded
in yellow within which the A/C actual altitude value is displayed
in green digits.
The window is surrounded in cyan when an altitude bug is hidden
by this read-out.
In this window, the hundreds of feet are written in a large size
whereas the tens and units are displayed by a drum operating as a
conventional mechanical altimeter.
When the altitude data is not valid, a red ALT flag is displayed
in place of the altitude tape, but the selected pressure is
always displayed.
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 8
Config-2 May 01/05
TAI
ISIS Indicator - Negative Altitude Display
Figure 006
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 9
Config-2 May 01/05
TAI
ISIS Indicator - Reference Barometric Display
Figure 007
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 10
Config-2 May 01/05
TAI
ISIS Indicator - Pitch Scale Display
Figure 008
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 11
Config-2 May 01/05
TAI
(b) Pitch angle information
(Ref. Fig. 008)
The A/C present pitch angle is given by the vertical
displacements of the pitch attitude scale with respect to the
center of the A/C symbol. The scale moves behind the cut-sphere
shaped window, limited by the lines of an upper (blue) and a
lower (brown) sector. The scale rotates around the center of the
A/C symbol in accordance with the A/C present roll angle.
The pitch scale comprises white reference lines and associated
pitch angle values. The lines are given every 2.5 degrees from -
30 to + 30 degrees. Beyond 30 degrees, red large arrow heads
(V-shaped) indicate an excessive attitude and the direction to
follow in order to reduce it.
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 12
Config-2 May 01/05
TAI
ISIS Indicator - Attitude Failure Display
Figure 009
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 13
Config-2 May 01/05
TAI
(6) LS function
(Ref. Fig. 010, 011)
When the LS pushbutton switch located on the right top part of the
indicator is pushed, the Glide Slope (G/S) and Localizer (LOC) scales
come into view.
If the LOC and/or G/S signals are in Failure Warning condition or No
Refresh, the relative scale disappears and the relative red flag LOC
and/or G/S appears respectively in the left bottom corner and/or in
the right top corner of the display area. If the LOC and/or G/S
signals are in NCD condition, only the scales without diamond are
displayed.
(Ref. Fig. 012)
B. Standby Compass
The standby compass consists of a magnetic element rotating inside a
compass bowl, immersed in a damping liquid. The magnetic element (1) is
linked to a graduated compass card which moves against a lubber line (2)
and gives the magnetic heading.
Above the viewing window are two apertures (4) marked B (E.W) and C
(N.S), allowing to achieve compensation by positioning the two small
magnetized bars (compensator).
Below the viewing window is a non-magnetic lamp (3) assembly which
provides illumination of the compass card.
4. Power
____________
Supply
(Ref. Fig. 013)
A. ISIS Indicator
The ISIS indicator is supplied with 28VDC from the essential busbar
401PP. In case of loss of this busbar, the supply of the ISIS indicator
is automatically switched over to the battery busbar 703PP by means of
the relay 7XB.
Consumption of the indicator is 20 W maximum in steady state.
Transparency time for the ISIS indicator is not less than 50 ms
(memorizing of current configuration on power supply transients comprised
between 50 and 200 ms).
The display is lost during power supply cut off comprised between 50 and
200 ms.
The system is supplied through these circuit breakers:
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU STBY/INST 5FN F12
105VU NAV/STBY/INST/BAT 23FN J01
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 14
Config-2 May 01/05
TAI
ISIS Indicator - LS Display
Figure 010
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 15
Config-2 May 01/05
TAI
ISIS Indicator - LS Failure Display
Figure 011
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 16
Config-2 May 01/05
TAI
Standby Compass - Data Indicating
Figure 012
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 17
Config-2 May 01/05
TAI
ISIS Indicator - Power Supply
Figure 013
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 18
Config-2 May 01/05
TAI
B. Standby Compass
The standby compass is supplied with 28VDC from the sheddable essential
bus 801PP.
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU LIGHTING/ICE AND STBY/COMP/LIGHT 1LF H04
5. Interface
_________
A. Mechanical Interface
The ISIS indicator is to 3 ATI size in accordance with ARINC 408A.
B. Peripherals
(Ref. Fig. 014)
(a) Ground/open signal from the ATT/HDG selector switch for selection
of active ADIRU 1 or 3.
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 19
Config-2 May 01/05
TAI
ISIS - Interfaces
Figure 014
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 20
Config-2 May 01/05
TAI
(b) Ref baro pressure in in.Hg and hPa pin-program
- this discrete input permits the display of the reference
barometric pressure in in.Hg in addition to the reference
barometric pressure in hPa.
(f) Four input discretes are used for indicator face tilting
The face of the ISIS indicator can be set at 0 deg. and tilted
from 10 to 24 deg. by steps of 1 deg.
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 21
Config-2 May 01/05
TAI
ISIS Indicator - MAINT Flag Display
Figure 015
R
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 22
Config-2 May 01/05
TAI
(b) ARINC 429 output bus (low speed) for the following air data:
- barometric corrected altitude in feet (label 204) and in meters
if corresponding option is activated (label 214),
- standard altitude in feet (label 203) and in meters if
corresponding option is activated (label 216),
- altitude rate (label 212),
- computed airspeed in knots (label 206),
- total pressure in hPa (label 242),
- uncorrected average static pressure in hPa (label 245),
- Mach number (label 205),
- barometric reference setting in hPa (label 234) and in in.Hg if
corresponding option is activated (label 235).
(c) ARINC 429 output bus (high speed) for the following inertial
data:
- body roll rate in degrees per second (label 327),
- roll angle in degrees (label 325),
- body pitch rate in degrees per second (label 326),
- pitch angle in degrees (label 324),
- body yaw rate in degrees (label 330),
- body longitudinal acceleration (label 331),
- body lateral acceleration (label 332).
6. _____________________
Component Description
A. External Description
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 23
Config-2 Nov 01/08
TAI
R ISIS Indicator - OUT OF ORDER Display
Figure 016
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 24
Config-2 Aug 01/06
TAI
ISIS Indicator - Component Description
Figure 017
R
EFF :
223-237, 306-399, 401-404, 34-22-00
Page 25
Config-2 Nov 01/08
TAI
ISIS Indicator - Component Description
Figure 017A
R
EFF :
238-299, 405-499, 34-22-00
Page 26
Config-2 Nov 01/08
TAI
- an ATT/RST pushbutton switch to reset the horizon (attitude) function
to the true value,
- two ( + and - ) brightness adjustment pushbutton switches,
- a BUGS pushbutton switch for the display/inhibition of the BUGS
function,
- a LS pushbutton switch for the engagement/disengagement of the ILS
function,
- a light sensor,
- a BARO rotary knob/pushbutton switch. The pushbutton switch is used to
change the barometric pressure (which can be adjusted by the rotary
knob) to the standard pressure and back again.
The back of the ISIS indicator is equipped with a 41-pin connector, a
total pressure pneumatic connector (P) and a static pressure pneumatic
connector (S).
B. Internal Description
(Ref. Fig. 018, 019)
The ISIS indicator contains the following subassemblies:
- a Filtering Board (FIB)
- a Power Supply Unit (PSU)
- an Interface Board (INB)
- a Pressure Sensor Module (PSM)
- an Inertial Measurement Unit (IMU)
- a Control Processor and Graphic Display Module (CPGDM)
- an Optical Module (OPM).
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 27
Config-2 Feb 01/08
R
TAI
ISIS Indicator - Block Diagram
Figure 018
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 28
Config-2 Feb 01/08
R
TAI
ISIS Indicator - Location of Internal Components
Figure 019
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 29
Config-2 Feb 01/08
R
TAI
(4) Pressure sensor module
This module contains for each system (static pressure and total
pressure):
- a pressure sensor with a cell (silicon detector),
- a sensor memory with an electronic board that shapes the signals
and stores the characterization parameters of the sensor.
7. Operation
_________
A. System Performance
The parameter computation frequency is sufficient to respect the required
performances and to avoid important gap between two consecutive displayed
values. The elapsed time between the acquisition of air data and the
display of the parameters is less than 200 ms.
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 30
Config-2 Feb 01/08
R
TAI
(2) Standby altimeter function
The ISIS indicator can operate from -2500 to 55,000 ft and at 40,000
ft/mn speed variation without deterioration.
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 31
Config-2 Feb 01/08
R
TAI
ISIS INDICATOR - WAIT ATT Flag
Figure 020
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 32
Config-2 Feb 01/08
R
TAI
ISIS INDICATOR - ATT RESET Flag
Figure 021
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 33
Config-2 Feb 01/08
R
TAI
ISIS Indicator - Bugs Selection Display
Figure 022
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 34
Config-2 Feb 01/08
R
TAI
Initially, the first box of the SPD column (left top) is flashing.
The corresponding speed value has to be selected using the BARO
selector knob (cyan SET/SELECT indication followed by an arrow in the
right bottom part of the display). This value cannot be less than 30
kts and can only be selected or changed when OFF function is
deselected (true also with altitude bugs). When the correct value is
displayed, access to the next box (below) is made by pushing the -
pushbutton switch. This box is then active and flashes. After the
fourth box of the SPD column, access to the last box of the ALT
column (right top) is made by using the BARO selector knob. The
altitude values selected cannot be negative. The - pushbutton
switch is also used to select the last ALT box and then the first SPD
box again. The + pushbutton switch is used to return to the
previous box.
The operational page is displayed again and the entered values are
memorized by pushing the BUGS pushbutton switch or after 15 s without
pilot action. These values are memorized until new values are
entered, even in case of ISIS indicator power supply cutoff.
If one memorized bug has not to be displayed on speed or altitude
scale, it is possible to hide it by pushing the BARO selector knob.
The OFF indication is shown close to the selected box and the value
is still displayed. By pushing the BARO selector knob again, the
displayed and memorized bug is active. Initially, speed bugs are set
to 30 and altitude bugs are set to 0. All the bugs can be hidden
using the OFF function.
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 35
Config-2 Feb 01/08
R
TAI
ISIS Indicator - Attitude Reset Display
Figure 023
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 36
Config-2 Feb 01/08
R
TAI
This knob is used for the selection of the altitude and airspeed
bugs.
8. Test
____
A. BITE Description
(1) General
The ISIS indicator is fitted with an internal flight/ground
information in order to manage the BITE and to prevent maintenance
mode activation in flight.
The test is inhibited when the internal computed airspeed is greater
than 60 kts.
NOTE : The ISIS indicator complies with ABD0018, ABD0048 and ABD0100
____
Specification.
The ISIS indicator is able to display maintenance data when the BUGS
and the LS pushbutton switches are pushed simultaneously (at least 2
s). In this case, a menu with two items is shown on the Liquid
Crystal Display (LCD).
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 37
Config-2 Feb 01/08
R
TAI
ISIS Indicator - LRU IDENT Menu
Figure 024
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 38
Config-2 Feb 01/08
R
TAI
ISIS Indicator - ENGINEERING DATA Menu
Figure 025
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 39
Config-2 Feb 01/08
R
TAI
In addition the engineering data enables to display the
functional time counter.
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 40
Config-2 Feb 01/08
R
TAI
ISIS Indicator - DISPLAY TEST Menu
Figure 026
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 41
Config-2 Feb 01/08
TAI
ISIS Indicator - FUNCTIONAL TEST Menu
Figure 027
EFF :
223-299, 306-399, 401-499, 34-22-00
Page 42
Config-2 Feb 01/08
TAI
STANDBY DATA : ATTITUDE AND HEADING - ADJUSTMENT/TEST
_____________________________________________________
TASK 34-22-00-710-001
Operational Check of the standby compass including light test and visual check
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-22-00
Page 501
Nov 01/06
TAI
3. __________
Job Set-up
Subtask 34-22-00-860-050
(4) On the windshield center post, pull the standby compass support that
you can retract from its housing.
4. Procedure
_________
Subtask 34-22-00-710-050
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
EFF :
ALL 34-22-00
Page 502
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the OFF/NAV/ATT selector
switch related to the IR1 to
OFF.
R Subtask 34-22-00-710-050-A
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-22-00
Page 503
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R 3. On the INT LT section of the On the standby compass:
R overhead panel 25VU:
Subtask 34-22-00-210-050
5. Close-up
________
Subtask 34-22-00-860-051
(2) On the windshield center post, push the standby compass support into
its housing.
EFF :
ALL 34-22-00
Page 504
Nov 01/08
TAI
TASK 34-22-00-730-001
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
NOTE : To move the aircraft for this procedure, you can use:
____
- a tractor (you must disconnect the tractor and the towbar for each
adjustment) or,
- the aircraft engines (this is the recommended procedure).
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-22-00
Page 505
Feb 01/09
TAI
3. __________
Job Set-up
Subtask 34-22-00-860-052
(1) Make sure that there are no ferromagnetic parts installed near the
standby compass.
R Ferromagnetic parts near the standby compass can cause compass
R heading errors (fasteners, tools, etc...).
(2) Energize the aircraft electrical circuits from the APU (Ref. TASK 24-
41-00-861-002).
(3) Make sure that the standby compass operates correctly (Ref. TASK 34-
22-00-710-001).
(6) Adjust the position of the aircraft until its lubber line points to
the North with a deviation less than 2⁰.
(7) On the ADIRS CDU set the DISPLAY DATA selector switch to HDG.
EFF :
ALL 34-22-00
Page 506
Feb 01/09
TAI
**ON A/C 405-499,
Subtask 34-22-00-860-052-A
(1) Make sure that there are no ferromagnetic parts installed near the
standby compass.
Ferromagnetic parts near the standby compass can cause compass
heading errors(fasteners, tools, etc...).
(2) Energize the aircraft electrical circuits from the APU (Ref. TASK 24-
41-00-861-002).
(3) Make sure that the standby compass operates correctly (Ref. TASK 34-
22-00-710-001).
(6) Adjust the position of the aircraft until its lubber line points to
the North with a deviation less than 2⁰.
EFF :
405-499, 34-22-00
Page 507
Feb 01/09
TAI
**ON A/C ALL
Subtask 34-22-00-865-050
B. Make sure that these circuit breakers are closed to get the radio/
magnetic environment that usually occurs in flight :
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/VOR/1 2RS1 G13
49VU COM/VHF/1 2RC1 G09
49VU NAV/ADF/1 1RP1 H14
EFF :
ALL 34-22-00
Page 508
Feb 01/09
TAI
**ON A/C ALL
4. Procedure
_________
Subtask 34-22-00-730-050
R (1) Below the display window on the front face of the standby compass:
R - remove and safety the protection cover of the compensator.
R (3) Use the system in operation to set the aircraft to north (MHN)
(Magnetic Heading North):
- calculate and write the magnetic deviation DN between the MHN and
the CH (Compass Heading Indication of the Standby Compass):
DN = MHN - CH
- the Adjustment Value (AV) is equal to DN
- correct the CH with the AV to get the compensated compass heading
indication (CCH)
- put the non magnetic screwdriver into the NS hole of the standby
compass
- use the non magnetic screwdriver to set the standby compass to CCH.
Example:
. if MHN = 360⁰ and CH = 356⁰
DN = 360⁰ - 356⁰ = +4⁰
AV (adjustment value) = +4
EFF :
ALL 34-22-00
Page 509
Feb 01/09
TAI
Correct the Compass Heading indication of the standby compass (CH)
with the AV to get the CCH
356⁰ + 4 = 360⁰
. if MHN = 0⁰ and CH = 002⁰
DN = 0⁰ - 2⁰ = -2⁰
AV (Adjustment Value) = -2⁰
Correct the Compass Heading indication of the standby compass (CH)
with the AV to get the CCH
2⁰ +(-2⁰) = 0
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-22-00
Page 510
Feb 01/09
TAI
Correct the Compass Heading indication of the standby compass (CH)
with the Adjustment Value (AV) to get the CCH
182 + (-1) = 181
Subtask 34-22-00-730-050-A
R (1) Below the display window on the front face of the standby compass:
R - remove and safety the protection cover of the compensator.
R (3) Use the system in operation to set the aircraft to north (MHN)
R (Magnetic Heading North):
R - calculate and write the magnetic deviation DN between the MHN and
R the CH (Compass Heading Indication of the Standby Compass):
R DN = MHN - CH
R - the Adjustment Value (AV) is equal to DN
R - correct the CH with the AV to get the compensated compass heading
R indication (CCH)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-22-00
Page 511
Feb 01/09
TAI
R - put the non magnetic screwdriver into the NS hole of the standby
R compass
R - use the non magnetic screwdriver to set the standby compass to CCH.
R Example:
R . if MHN = 360⁰ and CH = 356⁰
R DN = 360⁰ - 356⁰ = +4⁰
R AV (adjustment value) = +4
R Correct the Compass Heading indication of the standby compass (CH)
R with the AV to get the CCH
R 356⁰ + 4 = 360⁰
R . if MHN = 0⁰ and CH = 002⁰
R DN = 0⁰ - 2⁰ = -2⁰
R AV (Adjustment Value) = -2⁰
R Correct the Compass Heading indication of the standby compass (CH)
R with the AV to get the CCH
R 2⁰ +(-2⁰) = 0
R
EFF :
405-499, 34-22-00
Page 512
Feb 01/09
TAI
R 174⁰ + 3⁰ = 177⁰
R . if MHS = 180⁰ and CH = 182⁰
R DS = 180⁰ - 182⁰ = -2⁰
R DS 2
R AV = -- = - - = -1
R 2 2
R Correct the Compass Heading indication of the standby compass (CH)
R with the Adjustment Value (AV) to get the CCH
R 182 + (-1) = 181
R Subtask 34-22-00-730-067
EFF :
401-499,
211-212, 215-215, 218-299, 303-399, 34-22-00
Page 513
Feb 01/09
TAI
R (2) Use the system in operation to set the aircraft to north (MHN)
R (Magnetic Heading North):
R - calculate and write the magnetic deviation DN between the MHN and
R the CH (Compass Heading Indication of the Standby Compass):
R DN = MHN - CH
R - the Adjustment Value (AV) is equal to DN
R - correct the CH with the AV to get the compensated compass heading
R indication (CCH)
R - put the non magnetic Compensation Key into the C hole of the
R standby compass
R - use the non magnetic Compensation Key to set the standby compass to
R CCH.
R Example:
R . if MHN = 360⁰ and CH = 356⁰
R DN = 360⁰ - 356⁰ = +4⁰
R AV (adjustment value) = +4
R Correct the Compass Heading indication of the standby compass (CH)
R with the AV to get the CCH
R 356⁰ + 4 = 360⁰
R . if MHN = 0⁰ and CH = 002⁰
R DN = 0⁰ - 2⁰ = -2⁰
R AV (Adjustment Value) = -2⁰
R Correct the Compass Heading indication of the standby compass (CH)
R with the AV to get the CCH
R 2⁰ +(-2⁰) = 0
R
EFF :
401-404,
211-212, 215-215, 218-299, 303-399, 34-22-00
Page 514
Feb 01/09
TAI
R - use the non magnetic Compensation Key to set the standby compass to
R CCH.
R Example:
R . if MHS = 180⁰ and CH = 174⁰
R DS = 180⁰ - 174⁰ = +6⁰
R DS 6
R AV = -- = + - = +3
R 2 2
R Correct the Compass Heading indication of the standby compass (CH)
R with the Adjustment Value (AV) to get the CCH
R 174⁰ + 3⁰ = 177⁰
R . if MHS = 180⁰ and CH = 182⁰
R DS = 180⁰ - 182⁰ = -2⁰
R DS 2
R AV = -- = - - = -1
R 2 2
R Correct the Compass Heading indication of the standby compass (CH)
R with the Adjustment Value (AV) to get the CCH
R 182 + (-1) = 181
R Subtask 34-22-00-730-067-A
R
EFF :
401-499,
211-212, 215-215, 218-299, 303-399, 34-22-00
Page 515
Feb 01/09
TAI
R - put the non magnetic Compensation Key into the C hole above the
R display window
R - use the non magnetic Compensation Key to set the C compensation
R system to zero.
R (2) Use the system in operation to set the aircraft to north (MHN)
R (Magnetic Heading North):
R - calculate and write the magnetic deviation DN between the MHN and
R the CH (Compass Heading Indication of the Standby Compass):
R DN = MHN - CH
R - the Adjustment Value (AV) is equal to DN
R - correct the CH with the AV to get the compensated compass heading
R indication (CCH)
R - put the non magnetic Compensation Key into the C hole of the
R standby compass
R - use the non magnetic Compensation Key to set the standby compass to
R CCH.
R Example:
R . if MHN = 360⁰ and CH = 356⁰
R DN = 360⁰ - 356⁰ = +4⁰
R AV (adjustment value) = +4
R Correct the Compass Heading indication of the standby compass (CH)
R with the AV to get the CCH
R 356⁰ + 4 = 360⁰
R . if MHN = 0⁰ and CH = 002⁰
R DN = 0⁰ - 2⁰ = -2⁰
R AV (Adjustment Value) = -2⁰
R Correct the Compass Heading indication of the standby compass (CH)
R with the AV to get the CCH
R 2⁰ +(-2⁰) = 0
EFF :
405-499, 34-22-00
Page 516
Feb 01/09
TAI
R DS
R the Adjustment Value (AV) is equal to --
R 2
R - correct the CH with the AV to get the CCH
R - put the non magnetic Compensation Key into the C hole of the
R standby compass
R - use the non magnetic Compensation Key to set the standby compass to
R CCH.
R Example:
R . if MHS = 180⁰ and CH = 174⁰
R DS = 180⁰ - 174⁰ = +6⁰
R DS 6
R AV = -- = + - = +3
R 2 2
R Correct the Compass Heading indication of the standby compass (CH)
R with the Adjustment Value (AV) to get the CCH
R 174⁰ + 3⁰ = 177⁰
R . if MHS = 180⁰ and CH = 182⁰
R DS = 180⁰ - 182⁰ = -2⁰
R DS 2
R AV = -- = - - = -1
R 2 2
R Correct the Compass Heading indication of the standby compass (CH)
R with the Adjustment Value (AV) to get the CCH
R 182 + (-1) = 181
EFF :
405-499, 34-22-00
Page 517
Feb 01/09
TAI
Subtask 34-22-00-730-065
(2) Use the system in operation to set the aircraft to North (MHN)
(Magnetic Heading North):
- Calculate and write the magnetic deviation DN between the MHN and
the CH (Compass Heading Indication of the Standby Compass):
DN = MHN - CH
- The Adjustment Value (AV) is equal to DN.
- Correct the CH with the AV to get the compensated compass heading
indication (CCH)
- Put the non magnetic screwdriver into the NS hole of the standby
compass
- Use the non magnetic screwdriver to set the standby compass to CCH.
Example:
. if MHN = 360⁰ and CH = 356⁰
DN = 360⁰ - 356⁰ = +4⁰
AV (Adjustment Value) = +4.
Correct the Compass Heading indication of the standby compass (CH)
with the AV to get the CCH
356⁰ + 4 = 360⁰.
. if MHN = 0⁰ and CH = 002⁰
DN = 0⁰ - 2⁰ = -2⁰
AV (Adjustment Value) = -2⁰.
Correct the Compass Heading indication of the standby compass (CH)
with the AV to get the CCH
2⁰ +(-2⁰) = 0.
EFF :
405-499, 34-22-00
Page 518
Feb 01/09
TAI
- Put the non magnetic screwdriver into the EW hole of the standby
compass
- Use the non magnetic screwdriver to set the standby compass to CCH
(Ref. Para. (2)).
R
EFF :
405-499, 34-22-00
Page 519
Feb 01/09
TAI
Subtask 34-22-00-730-066
(2) Use the system in operation to set the aircraft to North (MHN)
(Magnetic Heading North):
- Calculate and write the magnetic deviation DN between the MHN and
the CH (Compass Heading Indication of the Standby Compass):
DN = MHN - CH
- The Adjustment Value (AV) is equal to DN.
- Correct the CH with the AV to get the compensated compass heading
indication (CCH)
- Put the non magnetic Compensation Key into the C hole of the
standby compass
- Use the non magnetic Compensation Key to set the standby compass to
CCH.
Example:
. if MHN = 360⁰ and CH = 356⁰
DN = 360⁰ - 356⁰ = +4⁰
AV (Adjustment Value) = +4.
Correct the Compass Heading indication of the standby compass (CH)
with the AV to get the CCH
356⁰ + 4 = 360⁰.
. if MHN = 0⁰ and CH = 002⁰
DN = 0⁰ - 2⁰ = -2⁰
AV (Adjustment Value) = -2⁰
Correct the Compass Heading indication of the standby compass (CH)
with the AV to get the CCH
2⁰ +(-2⁰) = 0.
R
EFF :
405-499, 34-22-00
Page 520
Feb 01/09
TAI
- Put the non magnetic Compensation Key into the B hole of the
standby compass
- Use the non magnetic Compensation Key to set the standby compass to
CCH (Ref. Para. (2)).
R
EFF :
405-499, 34-22-00
Page 521
Feb 01/09
TAI
**ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-299, 301-399,
401-404,
Subtask 34-22-00-730-051
NOTE : During the adjustment, the standby compass turns 360⁰. Make sure
____
that the letters and graduations on the compass card are not
damaged.
- set the aircraft to the twelve headings one after the other
which are necessary to find the deviation curve:
0⁰, 30⁰, 60⁰, 90⁰, 120⁰, 150⁰, 180⁰, 210⁰, 240⁰, 270⁰, 300⁰,
330⁰
- write the values of the standby compass and of the NDs (or ADIRS
CDU + magnetic variation) for each aircraft position,
- calculate the remaining deviation values R(⁰):
R(⁰) = MH - indication of standby compass,
- make sure that:
* the remaining deviation values R(⁰) are not more than + or -
8⁰ for each heading,
* the maximum range between the positive and negative deviation
values R(⁰) is not more than 10⁰,
* the difference between each magnetic heading value on the
standby compass and the ND is not more than 8⁰. If the
difference is more than 8⁰, adjust the compensation,
- write the actual compass heading Magnetic Heading (MH) + R(⁰)
(Remaining deviation values)⁵ on the two correction cards. Put
the cards on each side of the support of the standby compass.
Subtask 34-22-00-730-051-A
NOTE : During the adjustment, the standby compass turns 360⁰. Make sure
____
that the letters and graduations on the compass card are not
damaged.
- Set the aircraft to the twelve headings one after the other
which are necessary to find the deviation curve:
0⁰, 30⁰, 60⁰, 90⁰, 120⁰, 150⁰, 180⁰, 210⁰, 240⁰, 270⁰, 300⁰,
330⁰.
- Write the values of the standby compass and of the NDs for each
aircraft position.
- Calculate the remaining deviation values R(⁰):
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-22-00
Page 522
Feb 01/09
TAI
R(⁰) = MH - indication of standby compass.
- Make sure that:
* The remaining deviation values R(⁰) are not more than + or -
8⁰ for each heading.
* The maximum range between the positive and negative deviation
values R(⁰) is not more than 10⁰.
* The difference between each magnetic heading value on the
standby compass and the ND is not more than 8⁰. If the
difference is more than 8⁰, adjust the compensation.
- Write the actual compass heading Magnetic Heading (MH) + R(⁰)
(Remaining deviation values)⁵ on the two correction cards. Put
the cards on each side of the support of the standby compass.
5. Close-up
________
Subtask 34-22-00-860-053
(6) Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
EFF :
ALL 34-22-00
Page 523
Feb 01/09
TAI
R **ON A/C 211-212, 215-215, 218-299, 303-399, 401-499,
R Subtask 34-22-00-860-068
R (5) Remove the ground support and maintenance equipment, the special and
R standard tools and all other items.
R
EFF :
401-499,
211-212, 215-215, 218-299, 303-399, 34-22-00
Page 524
Feb 01/09
TAI
**ON A/C ALL
TASK 34-22-00-730-003
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
NOTE : To move the aircraft for this procedure, you can use:
____
- a tractor (you must disconnect the tractor and the towbar for each
adjustment) or,
- the aircraft engines (this is the recommended procedure).
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-22-00
Page 525
Feb 01/09
TAI
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-22-00
Page 526
Feb 01/09
R
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-22-00-860-065
(1) Make sure that there are no ferromagnetic parts installed near the
standby compass.
Ferromagnetic parts (fasteners, tools, etc.) near the standby compass
can cause compass heading errors.
(2) Energize the aircraft electrical circuits from the APU (Ref. TASK 24-
41-00-861-002).
(3) Make sure that the standby compass operates correctly (Ref. TASK 34-
22-00-710-001).
R
EFF :
ALL 34-22-00
Page 527
Feb 01/09
TAI
(6) Adjust the position of the aircraft:
- The lubber line must point to the North with a deviation of less
than 2 degrees.
- The nose wheel must be on the ground marking defined by the
Firstmark area-calibration procedure.
(7) On the ADIRS CDU, set the DISPLAY DATA selector switch to HDG.
Subtask 34-22-00-865-055
B. Make sure that these circuit breakers are closed to get the radio/
magnetic environment that usually occurs in flight :
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/VOR/1 2RS1 G13
49VU COM/VHF/1 2RC1 G09
49VU NAV/ADF/1 1RP1 H14
R
EFF :
ALL 34-22-00
Page 528
Feb 01/09
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
**ON A/C 212-212,
Subtask 34-22-00-020-055
C. Below the display window, on the front face of the standby compass:
- Remove and safety the protection cover of the compensator.
4. Procedure
_________
Subtask 34-22-00-730-062
R
EFF :
ALL 34-22-00
Page 529
Feb 01/09
TAI
Standby Compass
Figure 501/TASK 34-22-00-991-002
R
EFF :
001-050, 053-099, 201-203, 301-302, 34-22-00
Page 530
Feb 01/09
TAI
Standby Compass
Figure 501A/TASK 34-22-00-991-002-A
R
EFF :
401-499,
211-212, 215-215, 218-299, 303-399, 34-22-00
Page 531
Feb 01/09
TAI
Standby Compass Calibrating (S.C.C.)
Figure 502/TASK 34-22-00-991-003
EFF :
001-050, 053-099, 201-203, 301-302, 34-22-00
Page 532
Feb 01/09
R
TAI
Standby Compass Calibrating (S.C.C.)
Figure 502A/TASK 34-22-00-991-003-A
EFF :
401-499,
211-212, 215-215, 218-299, 303-399, 34-22-00
Page 533
Feb 01/09
R
TAI
**ON A/C ALL
(1) Remove the four screws (1) from the plate (2) under the standby
compass.
(3) Remove the two screws (3) from the standby compass (4).
(4) Install the standby compass compensator (5) STANBY COMPASS CALIB
(2591553-903) with two non-magnetic screws (6) and two adjusting
shims (7) on the standby compass (4).
Subtask 34-22-00-730-063
(a) On the standby compass compensator, set the two drums of the knob
assembly to the N position.
(a) On the standby compass compensator, set the two drums of the knob
assembly to the E position.
EFF :
ALL 34-22-00
Page 534
Feb 01/09
R
TAI
(b) On the standby compass, after the compass becomes stable:
- Put the 2 mm-wide non-magnetic screwdriver into the EW hole
below the display window
- Adjust the E indication so that it agrees with the heading
indication of the standby compass compensator.
(a) On the standby compass compensator, set the two drums of the knob
assembly to the S position.
(a) On the standby compass compensator, set the two drums of the knob
assembly to the W position.
R
EFF :
001-050, 053-099, 201-203, 301-302, 34-22-00
Page 535
Feb 01/09
TAI
**ON A/C 211-212, 215-215, 218-299, 303-399, 401-499,
Subtask 34-22-00-730-063-A
(a) On the standby compass compensator, set the two drums of the knob
assembly to the N position.
(a) On the standby compass compensator, set the two drums of the knob
assembly to the E position.
(a) On the standby compass compensator, set the two drums of the knob
assembly to the S position.
EFF :
401-499,
211-212, 215-215, 218-299, 303-399, 34-22-00
Page 536
Feb 01/09
TAI
. if the standby compass compensator shows 180 degrees (S), and
the standby compass 176 degrees (180 - 176 = 4) the corrective
value is equal to half the difference = +2 degrees.
(a) On the standby compass compensator, set the two drums of the knob
assembly to the W position.
Subtask 34-22-00-730-064
NOTE : During this adjustment procedure, the letters and graduations (on
____
the compass card) will be visible because the standby compass
turns 360 degrees. Thus it becomes possible to make sure that the
letters and graduations are not damaged.
- Use the knob assembly to set the compass to these twelve headings
(necessary to find the deviation curve) one after the other:
0⁰, 30⁰, 60⁰, 90⁰, 120⁰, 150⁰, 180⁰, 210⁰, 240⁰, 270⁰, 300⁰, 330⁰
- Write the values of the standby compass (CH) and of the standby compass
compensator (MH) for each heading
- Calculate the remaining deviation values R(⁰) as follows:
R(⁰) = MH - CH (indication of standby compass)
- Make sure that:
* the remaining deviation values R(⁰) are not more than + or - 8
degrees for each heading
* the maximum range between the positive and negative deviation values
R(⁰) is not more than 10 degrees
* the difference between each magnetic heading value on the standby
compass and the standby compass compensator is not more than 8 degrees.
If the difference is more than 8 degrees, adjust the compensation.
EFF :
ALL 34-22-00
Page 537
Feb 01/09
TAI
- Write the magnetic heading Magnetic Heading (MH) + R(⁰) (Remaining
deviation values)⁵ on the two correction cards. Put the cards on each
side of the support of the standby compass.
5. Close-up
________
Subtask 34-22-00-860-066
A. Below the display window on the front face of the standby compass:
- Install the protection cover on the compensator.
Subtask 34-22-00-860-067
CAUTION : MAKE SURE THAT THE TWO DRUMS OF THE KNOB ASSEMBLY ARE ON
_______
THE N (NORTH) POSITION BEFORE YOU PUT THE STANDBY COMPASS
COMPENSATOR INTO STORAGE. THIS WILL PREVENT
DEMAGNETIZATION.
(4) Install the plate (2) with the four screws (1) under the standby
compass.
(7) Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
Subtask 34-22-00-080-051
C. Tool storage:
At the end of the test, refer to the manufacturer recommend.
EFF :
ALL 34-22-00
Page 538
Feb 01/09
TAI
COMPASS - STANDBY (2FN) - REMOVAL/INSTALLATION
______________________________________________
TASK 34-22-23-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-22-23
Page 401
Nov 01/08
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-22-23-865-053
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
4. Procedure
_________
EFF :
ALL 34-22-23
Page 402
Nov 01/08
TAI
Standby Compass
Figure 401/TASK 34-22-23-991-001
R
EFF :
001-050, 053-099, 201-203, 301-302, 34-22-23
Page 403
Nov 01/07
TAI
Standby Compass
Figure 401A/TASK 34-22-23-991-001-A
R
EFF :
401-499,
211-212, 215-215, 218-299, 303-399, 34-22-23
Page 404
Nov 01/08
TAI
R **ON A/C ALL
Subtask 34-22-23-020-050
(1) Pull the support (3) that can be retracted from its housing (2).
(4) Disengage the standby compass (5) from its support (3).
(7) Put blanking caps on the disconnected electrical connectors (1) and
(4).
EFF :
ALL 34-22-23
Page 405
Aug 01/99
TAI
TASK 34-22-23-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-22-23
Page 406
Nov 01/08
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-22-23-865-054
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
4. Procedure
_________
EFF :
ALL 34-22-23
Page 407
Nov 01/08
TAI
**ON A/C ALL
Subtask 34-22-23-420-050
(3) Remove the blanking caps from the electrical connectors (1) and (4).
(4) Make sure that the electrical connectors (1) and (4) are clean and in
the correct condition.
(5) Connect the electrical connector (1) to the standby compass (5).
(6) Install the Standby Compass (5) in its support (3) that can be
retracted.
(7) Attach the standby compass (5) with the four screws (6).
Subtask 34-22-23-865-055
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
1LF
Subtask 34-22-23-710-050
C. Test
(2) Do the operational test of the instrument and panel integral lighting
(Ref. TASK 33-13-00-710-001)
EFF :
ALL 34-22-23
Page 408
Nov 01/00
R
TAI
5. Close-up
________
Subtask 34-22-23-860-050
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
(2) Install the support (3) that can be retracted in its housing (2).
EFF :
ALL 34-22-23
Page 409
Aug 01/99
TAI
COMPASS - STANDBY (2FN) - INSPECTION/CHECK
__________________________________________
TASK 34-22-23-200-001
1. __________________
Reason for the Job
R
To make sure that the standby compass operates.
2. ______________________
Job Set-up Information
Not Applicable
3. __________
Job Set-up
Subtask 34-22-23-860-051
(1) On the windshield center post, pull the standby compass support that
you can retract from its housing.
4. Procedure
_________
Subtask 34-22-23-210-050
(3) Make sure that the two correction cards of the compass are on each
side of the support.
EFF :
ALL 34-22-23
Page 601
May 01/05
TAI
5. Close-up
________
Subtask 34-22-23-860-052
(2) On the windshield center post, push the standby compass support into
its housing.
EFF :
ALL 34-22-23
Page 602
Feb 01/96
TAI
INDICATOR - STANDBY HORIZON (7FN) - REMOVAL/INSTALLATION
________________________________________________________
TASK 34-22-24-000-001
NOTE : After long low-rate turns (less than 10 degree bank) the standby horizon
____
indicator does not give accurate bank indications immediately. The
specification of the standby horizon indicator accepts this type of
operation. Thus, it is not necessary to replace the indicator.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-22-24
Page 401
Nov 01/08
TAI
3. __________
Job Set-up
Subtask 34-22-24-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU STBY/HORIZON 5FN F12
122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04
Subtask 34-22-24-010-050
4. Procedure
_________
Subtask 34-22-24-020-050
(1) To cage the standby horizon indicator: pull knob (1) and insert the
locking wedge.
(3) Push the screws (2) to release the standby horizon indicator (3) from
the clamp.
(4) Disengage the standby horizon indicator (3) from its housing.
(7) Put blanking caps on the disconnected electrical connectors (4) and
(5).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-22-24
Page 402
Nov 01/08
TAI
Standby Horizon Indicator
Figure 401/TASK 34-22-24-991-001
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-22-24
Page 403
Nov 01/08
TAI
TASK 34-22-24-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R 3. __________
Job Set-up
R Subtask 34-22-24-865-054
R A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
R tagged
R -------------------------------------------------------------------------------
R PANEL DESIGNATION IDENT. LOCATION
R -------------------------------------------------------------------------------
R 49VU STBY/HORIZON 5FN F12
R 122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04
4. Procedure
_________
Subtask 34-22-24-420-050
(3) Remove the blanking caps from the electrical connectors (4) and (5).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-22-24
Page 404
Nov 01/08
TAI
(4) Make sure that the electrical connectors are clean and in the correct
condition.
(5) Connect the electrical connector (5) to the standby horizon indicator
(3).
Subtask 34-22-24-865-053
R B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5FN, 4LF
Subtask 34-22-24-710-050
R C. Operational Test
(1) Do the operational test of the instrument and panel integral lighting
(Ref. TASK 33-13-00-710-001).
(3) One minute and 30 seconds after the energization, pull the resetting
knob until the horizon line is stable. Release the knob rapidly.
(5) Make sure that the horizon line is stable and in line with the
aircraft symbol.
5. Close-up
________
Subtask 34-22-24-410-050
(2) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-304,
34-22-24
Page 405
Nov 01/08
TAI
INDICATOR - ISIS (INTEGRATED STANDBY INSTRUMENT SYSTEM) (22FN) - SERVICING
__________________________________________________________________________
TASK 34-22-25-170-001
Draining and Flushing of the Standby Static and Standby Total Pressure lines
(ISIS)
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 301
Aug 01/07
TAI
3. __________
Job Set-up
Subtask 34-22-25-861-051
Subtask 34-22-25-010-051
B. Get Access
(1) Put the access platform in position in the zone 110 at the access
door 811.
Subtask 34-22-25-020-052-A
(1) Drain the standby air data system (Ref. TASK 12-24-34-600-001).
(2) Disconnect the quick-disconnect coupling (4) from the ADM 19FP8 and
the quick-disconnect coupling (8) from the ADM 19FP3.
(4) Remove the water drain plug (2) from the water drain (1).
(6) Disconnect the quick-disconnect coupling (7) from the red 2-pin
coupling and disconnect the quick-disconnect coupling (5) from the
yellow 3-pin coupling of the ISIS indicator 22FN (6).
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 302
Aug 01/07
TAI
Pressure lines
Figure 301/TASK 34-22-25-991-002
R
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 303
May 01/05
TAI
R (7) Connect a ADAPTERS-AIR DATA SYSTEM FLUSHING 3-pin adapter
R (98D34103002100) ) to the hose (5) and a ADAPTERS-AIR DATA SYSTEM
R FLUSHING 2-pin adapter (98D34103002102) to the hose (7). Then connect
to the dry nitrogen source - 2 bars (29 psi).
4. Procedure
_________
Subtask 34-22-25-170-050-B
A. Draining and Flushing of the Standby Static and the Standby Total
Pressure Lines
(1) Blow the gas into the hoses (5) and into the hose (7), from one to
the other, at a pressure of 2 bars (29 psi). Do this for
approximately 5 minutes.
R (2) Clean draining hole of the pitot probe 3 with CLEANER-PITOT PROBE and
a WIRE-NYLON, dia. 0.6mm.
(4) Put an ADAPTER COVER-STATIC PORT on the L static probe 3 then on the
R static probe 3.
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 304
Aug 01/07
TAI
**ON A/C 223-299, 306-399, 401-499,
Subtask 34-22-25-170-050-A
A. Draining and Flushing of the Standby Static and the Standby Total
Pressure Lines
(1) Blow the gas into the hoses (5) and into the hose (7), from one to
the other, at a pressure of 2 bars (29 psi). Do this for
approximately 5 minutes.
(2) Clean draining hole of the pitot probe 3 with CLEANER-PITOT PROBE and
WIRE-NYLON dia. 0,7 and 0,8mm.
(4) Put an ADAPTER COVER-STATIC PORT on the L static probe 3 then on the
R static probe 3.
Subtask 34-22-25-860-059
(3) Install the water drain plug (2) on the water drain (1).
(4) Remove the blanking cap from the pressure switch 14WN (3).
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 305
May 01/08
TAI
(5) Connect the static line to the pressure switch 14WN (3).
(6) Connect the quick-disconnect coupling (8) to the ADM 19FP3 and the
quick-disconnect coupling (4) to the ADM 19FP8.
(Ref. Fig. 302/TASK 34-22-25-991-004)
(7) Make sure that you can see the blue ring on the quick-disconnect
couplings (4) and (8).
(8) Pull the quick-disconnect coupling to be sure that they are correctly
attached.
(9) Install the ISIS indicator (Ref. TASK 34-22-25-400-001) on the center
instrument panel.
Subtask 34-22-25-790-051
C. Leak test
(1) Make sure that all the hoses are connected correctly.
5. Close-up
________
Subtask 34-22-25-410-051
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
(2) Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 306
Aug 01/07
R
TAI
R Illustration of the Quick-Disconnect coupling
R Figure 302/TASK 34-22-25-991-004
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 307
Feb 01/07
TAI
Subtask 34-22-25-862-050
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 308
Feb 01/07
TAI
______________________________________________________________
INDICATOR - ISIS (INTEGRATED STANDBY INSTRUMENT SYSTEM) (22FN)
____________________
REMOVAL/INSTALLATION
TASK 34-22-25-000-001
NOTE : After long low-rate turns (less than 6 degree bank) the ISIS
____
indicatorISIS does not give accurate bank indications immediately. The
specification of the ISIS indicator accepts this type of operation.
Thus, it is not necessary to replace the indicator.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 401
Nov 01/08
TAI
**ON A/C 223-299, 306-399, 401-499,
3. __________
Job Set-up
Subtask 34-22-25-865-058
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU STBY/INST 5FN F12
105VU NAV/STBY/INST/BAT 23FN J01
122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04
Subtask 34-22-25-010-050
4. Procedure
_________
Subtask 34-22-25-020-051
CAUTION : WHEN YOU REMOVE THE ISIS INDICATOR, DO NOT USE THE BARO BUTTON
_______
TO PULL THE INDICATOR OUT OF ITS HOUSING. IF YOU USE THE BARO
BUTTON, YOU CAN CAUSE DAMAGE TO THE INDICATOR.
(2) Push the screws (3) to release the ISIS indicator (1) from the clamp.
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 402
Nov 01/08
TAI
ISIS Indicator
Figure 401/TASK 34-22-25-991-001
R
EFF :
223-237, 306-399, 401-404, 34-22-25
Page 403
Nov 01/08
TAI
ISIS Indicator
Figure 401A/TASK 34-22-25-991-001-A
R
EFF :
238-299, 405-499, 34-22-25
Page 404
Nov 01/08
TAI
(3) Disengage the ISIS indicator (1) from its housing.
(5) Disconnect the red and green quick-disconnect couplings (4) from the
connectors (2).
(7) Put blanking caps on the disconnected electrical connectors (5) and
(6).
(8) Put blanking plugs on the disconnected line ends (2) and (4).
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 405
Feb 01/08
R
TAI
TASK 34-22-25-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 406
Nov 01/08
TAI
3. __________
Job Set-up
Subtask 34-22-25-865-059
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU STBY/INST 5FN F12
105VU NAV/STBY/INST/BAT 23FN J01
122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04
Subtask 34-22-25-010-053
4. Procedure
_________
Subtask 34-22-25-420-051
(3) Remove the blanking plugs from the line ends (2) and (4).
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 407
Nov 01/08
TAI
Illustration of the Quick-disconnect coupling
Figure 402/TASK 34-22-25-991-003
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 408
Feb 01/08
TAI
R (5) Make sure that you can see the blue ring on the quick-disconnect
R couplings.
R
R (7) Remove the blanking caps from the electrical connectors (5) and (6).
R (8) Make sure that the electrical connectors are clean and in the correct
condition.
(9) Connect the electrical connector (5) to the receptacle (6) of the
ISIS indicator (1).
R (11) Look behind the ISIS indicator and make sure that the position of the
R flexible hoses (static and total pressure lines) is satisfactory (no
crushing, kinks, creases or folds).
Subtask 34-22-25-865-060
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
4LF, 5FN, 23FN
Subtask 34-22-25-710-050
C. Test
R (1) Make sure that the indications of the ISIS indicator are in the
R tolerances that follow:
R (Ref. Fig. 403/TASK 34-22-25-991-005)
R - Roll: less than 2.5 deg. (equivalent to 1/4 of a roll graduation)
R (item A),
R - Pitch: less than 1.25 deg. (equivalent to 1/2 of a pitch
R graduation) (item B),
R - Lateral Acceleration: less than 1.3mm (item C).
R (2) Hold the ISIS indicator in the correct position and tighten the
R screws (3).
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 409
May 01/08
TAI
R Tolerances limit of the ISIS Indicator (22FN) installation
R Figure 403/TASK 34-22-25-991-005
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 410
May 01/08
TAI
R (3) Do the operational test of the instrument and panel integral lighting
(Ref. TASK 33-13-00-710-001).
R (4) Do the BITE test of the ISIS indicator (Ref. TASK 34-22-25-740-001).
5. Close-up
________
Subtask 34-22-25-410-050
(3) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 411
May 01/08
TAI
______________________________________________________________
INDICATOR - ISIS (INTEGRATED STANDBY INSTRUMENT SYSTEM) (22FN)
_______________
ADJUSTMENT/TEST
TASK 34-22-25-710-001
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-22-25-861-052
Subtask 34-22-25-860-063
(1) On the SWITCHING panel 8VU, make sure that the AIR DATA selector
switch is at NORM.
R
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 501
May 01/05
TAI
Subtask 34-22-25-865-063
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU STBY/INST 5FN F12
105VU NAV/STBY/INST/BAT 23FN J01
Subtask 34-22-25-860-064
(1) On panel 35VU, make sure that the ELEC/ BAT1 and ELEC/BAT2 pushbutton
switches are released.
- the OFF legends is on.
4. Procedure
_________
Subtask 34-22-25-740-052
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 502
May 01/05
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
4. Close circuit breaker 5FN. - after approximatly 12 seconds, make
sure that the display of the ISIS
indicator (22FN) is on. The INIT 90s
(initialization display) indication
comes into view.
5. Close-up
________
Subtask 34-22-25-860-065
Subtask 34-22-25-862-051
R
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 503
May 01/05
TAI
TASK 34-22-25-740-001
BITE Test of the ISIS Indicator with the pushbutton switches on the Face of the
Indicator.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-22-25-860-052
R
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 504
May 01/05
TAI
Subtask 34-22-25-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU STBY/INST 5FN F12
Subtask 34-22-25-865-051
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU STBY/INST 5FN F12
Subtask 34-22-25-860-050
4. Procedure
_________
Subtask 34-22-25-740-050
NOTE : Do not move the aircraft during the alignment period (110s) of
____
this test.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the BUGS and the LS - the maintenance page comes into view
pushbutton switches at the same with TESTS and OTHER DATA
time and hold them pushed for indications.
more than 2 seconds.
R
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 505
May 01/05
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the TESTS page comes into view.
the TESTS indication.
- push the line key adjacent to - the TEST page comes into view. Then
the FUNCTIONAL TEST (110s) the IN PROGRESS 110s indication comes
indication. into view.
5. Close-up
________
Subtask 34-22-25-860-051
R
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 506
May 01/05
TAI
TASK 34-22-25-790-001
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR INJURE PERSONS.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______
CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
AUTOMATIC MOVEMENT OF THE FLIGHT CONTROL SURFACES CAN BE DANGEROUS
AND/OR CAUSE DAMAGE.
CAUTION : OBEY THESE PRECAUTIONS WHEN YOU DO THE TEST TO PREVENT DAMAGE TO
_______
INSTRUMENTS:
R - THE PRESSURES SET MUST NOT BE MORE THAN 1050 hPa (31 in Hg) OR LESS
THAN 115 hPa (3.39 in Hg)
R - CHANGES IN STATIC PRESSURE MUST NOT BE MORE THAN 6000 FEET/MINUTE
- DO NOT SUDDENLY OPEN LINES TO AMBIENT AIR WHILE THE PRESSURE
GENERATOR IS CONNECTED.
CAUTION : THE TOTAL PRESSURE IN THE PITOT SYSTEM MUST NEVER BE LESS THAN THE
_______
STATIC PRESSURE. THE DIFFERENCE BETWEEN THE PITOT AND THE STATIC
PRESSURE CIRCUITS MUST NEVER BE MORE THAN 368 hPa (10.86 in Hg).
1. __________________
Reason for the Job
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 507
May 01/07
TAI
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-22-25-860-053
Subtask 34-22-25-865-052
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 508
Aug 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
Subtask 34-22-25-865-053
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU STBY/INST 5FN F12
105VU NAV/STBY/INST/BAT 23FN J01
Subtask 34-22-25-420-050
(1) Remove the slip on covers from the static probes 7DA3, 8DA3 and the
pitot probe 9DA3 of the standby system.
R (2) Connect the GENERATOR - GROUND PRESSURE MINI. 100 MB (1.45 PSI) TO to
one standby static probe with the ADAPTER COVER-STATIC PORT
(98D34003500100).
(3) Connect the ground pressure generator to the standby pitot probe with
the ADAPTOR-CHARGING,PITOT PROBE.
(4) Seal the opposite standby static probe with a piece of plastic (see
CAUTION para.(5) below) and with the COVER-STATIC PROBE
(98D34003500103).
CAUTION : WHEN YOU SEAL THE DRAIN HOLE IN THE PITOT PROBE, DO NOT
_______
SEAL THE HOLE DIRECTLY WITH THE COLORED ADHESIVE TAPE.
ALWAYS PUT A PIECE OF PLASTIC ON THE HOLE FIRST AND USE THE
COLORED ADHESIVE TAPE TO ATTACH THE PLASTIC.
IF YOU SEAL THE DRAIN HOLE DIRECTLY WITH THE ADHESIVE TAPE,
THERE IS A RISK THAT SOME OF THE ADHESIVE WILL STAY ON THE
HOLE AND COLLECT PARTICLES. THIS CAN SUBSEQUENTLY CAUSE
BLOCKAGE OF THE HOLE AND THUS INCORRECT OPERATION OF THE
PROBE.
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 509
Aug 01/08
TAI
Seal the drain holes of the pitot probe with a piece of plastic
and/or colored adhesive tape of very bright color.
(6) Move the vane of the AOA sensor 3 to the upper position. Maintain the
vane in position with colored adhesive tape.
Subtask 34-22-25-860-067
(1) Do the EIS start procedure (PFD only) (Ref. TASK 31-60-00-860-001).
(2) Make sure that the flaps are in the fully retracted position
(Ref. TASK 27-50-00-866-009).
(3) On the ADIRS CDU, set the OFF/NAV/ATT selector switches to NAV.
4. Procedure
_________
R Subtask 34-22-25-790-050-C
R A. Leak Test
R NOTE : You can do the test that follows for a static pressure of 691.4
____
R hPa and an impact pressure of 59 hPa (or a total pressure of 750.4
R hPa) but it is not as accurate.
R On the SWITCHING panel 8VU set the AIR DATA selector switch to
R CAPT ON 3 (or F/O ON 3) position.
R Make sure that:
R - the CAPT (or F/O) PFD shows 10,237 ft +/- 30 ft and 190 kts +/-
R 3 kts
R - the ISIS indicator show 10,201 ft +/- 50 ft and airspeed 189 kts
R +/- 5 kts.
R After 5 minutes:
R - the change of altitude must not be more than 370 ft,
R - the change of speed must not be more than 10 Kts.
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 510
Aug 01/08
TAI
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R 2. On the SWITCHING panel 8VU set On the CAPT (or F/O) PFD, the
R the AIR DATA selector switch to indications from ADIRU3 are shown.
R CAPT ON 3 (or F/O ON 3) position.
R - slowly balance the pressure in The rate of descent must not be more
R the standby static and pitot than 6000 ft/mn.
R circuits and open the
R electrovalves to get
R atmospheric pressure.
EFF :
223-299, 34-22-25
Page 511
Aug 01/08
TAI
**ON A/C 306-399,
Subtask 34-22-25-790-050-B
A. Leak Test
R NOTE : You can do the test that follows for a static pressure of 691 hPa
____
R and an impact pressure of 59.3 hPa (or a total pressure of 750.3
R hPa) but it is not as accurate.
On the SWITCHING panel 8VU set the AIR DATA selector switch to
CAPT ON 3 (or F/O ON 3) position.
Make sure that:
R - the CAPT (or F/O) PFD shows 10,177 ft +/- 30 ft and 188 kts +/-
R 3 kts,
R - the ISIS indicator shows 10,216 ft +/- 50 ft and airspeed 189
R kts +/- 5 kts.
After 5 minutes:
- the change of altitude must not be more than 370 ft,
- the change of speed must not be more than 10 Kts.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
2. On the SWITCHING panel 8VU set On the CAPT (or F/O) PFD, the
the AIR DATA selector switch to indications from ADIRU3 are shown.
CAPT ON 3 (or F/O ON 3) position.
R
EFF :
306-399, 34-22-25
Page 512
Aug 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R the ground pressure generator. the ISIS indicator shows 20,166 ft
R +/- 85 ft and 323 kts +/- 8 kts.
After 5 minutes, on the ISIS display
and on the CAPT (or F/O) PFD:
After 10 minutes:
- slowly balance the pressure in The rate of descent must not be more
the standby static and pitot than 6000 ft/mn.
circuits and open the
electrovalves to get
atmospheric pressure.
Subtask 34-22-25-790-050-A
A. Leak Test
R NOTE : You can do the test that follows for a static pressure of 690 hPa
____
R and an impact pressure of 60.4 hPa (or a total pressure of 750.4
R hPa) but it is not as accurate.
On the SWITCHING panel 8VU set the AIR DATA selector switch to
CAPT ON 3 (or F/O ON 3) position.
Make sure that:
R - the CAPT (or F/O) PFD shows 10,225 ft +/- 30 ft and 190 kts +/-
R 3 kts,
R - the ISIS indicator show 10,253 ft +/- 50 ft and airspeed 191 kts
R +/- 5 kts.
After 5 minutes:
- the change of altitude must not be more than 370 ft,
- the change of speed must not be more than 10 Kts.
EFF :
306-399, 401-499, 34-22-25
Page 513
Aug 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
2. On the SWITCHING panel 8VU set On the CAPT (or F/O) PFD, the
the AIR DATA selector switch to indications from ADIRU3 are shown.
CAPT ON 3 (or F/O ON 3) position.
After 10 minutes:
- slowly balance the pressure in The rate of descent must not be more
the standby static and pitot than 6000 ft/mn.
circuits and open the
electrovalves to get
atmospheric pressure.
EFF :
401-499, 34-22-25
Page 514
Aug 01/08
TAI
**ON A/C 223-299, 306-399, 401-499,
5. Close-up
________
Subtask 34-22-25-020-050
(3) Remove the adaptors from the standby static probe and the standby
pitot probe.
(4) Remove the cover from the opposite standby static probe.
(5) Remove the piece of plastic and the colored adhesive tape from the
drain holes of the standby pitot probe.
(6) Remove the colored adhesive tape from the vane of the AOA.
(7) Install the slip on covers on the standby static probes and the
standby pitot probe.
Subtask 34-22-25-865-054
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
3DA3, 5DA3, 7XE
Subtask 34-22-25-860-054
(1) On the SWITCHING panel 8VU set the AIR DATA selector switch to NORMAL
position.
(2) Do the EIS stop procedure (PFD only) (Ref. TASK 31-60-00-860-002).
(3) On the ADIRS CDU, set the OFF/NAV/ATT selector switches to OFF.
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 515
Aug 01/08
R
TAI
(5) De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
(6) Make sure that the work area is clean and clear of tool(s) and other
items.
R (7) Make sure that the drain holes on the pitot probes are not blocked by
R unwanted materials (Ref. TASK 34-11-15-200-001)
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 516
Aug 01/08
TAI
TASK 34-22-25-720-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 517
Aug 01/08
TAI
3. __________
Job Set-up
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
Subtask 34-22-25-860-055
Subtask 34-22-25-865-055
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU ANTI ICE/PROBES/AOA/1 4DA1 D04
49VU ANTI ICE/PROBES/PITOT/1 3DA1 D02
105VU ELEC/CSM/G /EV AUTO/SPLY 7XE C01
122VU ANTI ICE/PROBES/2/PITOT 3DA2 Y14
122VU ANTI ICE/PROBES/2/AOA 4DA2 Y13
122VU ANTI ICE/PROBES/2/STATIC 5DA2 Y11
122VU ANTI ICE/PROBES/3/PITOT 3DA3 Z16
122VU ANTI ICE/PROBES/3/AOA 4DA3 Z15
122VU ANTI ICE/PROBES/3/STATIC 5DA3 Z14
122VU ANTI ICE/PROBES/1/STATIC 5DA1 Z13
Subtask 34-22-25-865-056
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU STBY/INST 5FN F12
105VU NAV/STBY/INST/BAT 23FN J01
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 518
Nov 01/07
TAI
Subtask 34-22-25-860-056
CAUTION : OBEY THESE PRECAUTIONS WHEN YOU DO THE TEST TO PREVENT DAMAGE
_______
TO INSTRUMENTS:
- THE PRESSURES SET MUST NOT BE MORE THAN 1050 hPa (31 in Hg)
OR LESS THAN 115 hPa (3.39 in Hg)
- CHANGES IN STATIC PRESSURE MUST NOT BE MORE THAN 6000
FEET/MINUTE
- DO NOT SUDDENLY OPEN LINES TO AMBIENT AIR WHILE THE PRESSURE
GENERATOR IS CONNECTED.
CAUTION : THE TOTAL PRESSURE IN THE PITOT SYSTEM MUST NEVER BE LESS THAN
_______
THE STATIC PRESSURE. THE DIFFERENCE BETWEEN THE PITOT AND THE
STATIC PRESSURE CIRCUITS MUST NEVER BE MORE THAN 368 hPa (10.86
in Hg).
(1) Remove the slip on covers from the L and R standby static probes
7DA3, 8DA3 and the standby pitot probe 9DA3.
(2) Drain the standby air data system (Ref. TASK 12-24-34-600-001).
R (3) Connect the GENERATOR - GROUND PRESSURE MINI. 100 MB (1.45 PSI) TO
to:
- the L or R standby static probe with the ADAPTER COVER-STATIC PORT
(98D34003500100).
- the standby pitot probe with the ADAPTOR-CHARGING,PITOT PROBE.
(4) Seal the opposite standby static probe with the COVER-STATIC PROBE
(98D34003500103).
(5) Start the ground pressure generator and set a static pressure of 1013
hPa (29,92 in.Hg).
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 519
Aug 01/08
TAI
4. Procedure
_________
Subtask 34-22-25-720-051
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set an impact pressure of 200.1 - make sure that the ISIS indicator
hPa (340 Kts). shows 29,000 ft (+ or - 180 ft).
- make sure that the ISIS indicator
shows 340 Kts (+ or - 5 Kts).
- set an impact pressure of 200.1 - make sure that the ISIS indicator
hPa (340 Kts). shows 20,000 ft (+ or - 150 ft).
- make sure that the ISIS indicator
shows 340 Kts (+ or - 5 Kts).
- set an impact pressure of 153.5 - make sure that the ISIS indicator
hPa (300 Kts). shows 15,000 ft (+ or - 105 ft).
- make sure that the ISIS indicator
shows 300 Kts (+ or - 4 Kts).
- set an impact pressure of 105 hPa - make sure that the ISIS indicator
(250 Kts). shows 10,000 ft (+ or - 50 ft).
- make sure that the ISIS indicator
shows 250 Kts (+ or - 5 Kts).
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 520
Aug 01/07
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set an impact pressure of 53.5 hPa - make sure that the ISIS indicator
(180 Kts). shows 5000 ft (+ or - 40 ft).
- make sure that the ISIS indicator
shows 180 Kts (+ or - 3 Kts).
- set an impact pressure of 53.5 hPa - make sure that the ISIS indicator
(180 Kts). shows 3000 ft (+ or - 30 ft).
- make sure that the ISIS indicator
shows 180 Kts (+ or - 5 Kts).
- set an impact pressure of 53.5 hPa - make sure that the ISIS indicator
(180 Kts). shows 1000 ft (+ or - 20 ft).
- make sure that the ISIS indicator
shows 180 Kts (+ or - 5 Kts).
5. Close-up
________
Subtask 34-22-25-860-057
(3) Remove the adaptors from the standby static probe and the standby
pitot probe.
(4) Remove the cover from the opposite standby static probe.
(5) Install the slip on covers on the standby static probes and the
standby pitot probe.
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 521
Aug 01/07
R
TAI
Subtask 34-22-25-865-057
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
3DA1, 3DA2, 3DA3, 4DA1, 4DA2, 4DA3, 5DA1, 5DA2, 5DA3, 7XE
Subtask 34-22-25-860-058
(3) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 522
Aug 01/07
TAI
______________________________________________________________
INDICATOR - ISIS (INTEGRATED STANDBY INSTRUMENT SYSTEM) (22FN)
________________
INSPECTION/CHECK
TASK 34-22-25-200-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-22-25-860-066
Subtask 34-22-25-865-067
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU STBY/INST 5FN F12
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 601
Aug 01/06
TAI
4. Procedure
_________
Subtask 34-22-25-710-051
Subtask 34-22-25-740-053
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- Push the (+) pushbutton switch - The FUNCTIONAL and DISPLAY TESTS
page comes into view.
Subtask 34-22-25-280-050
Subtask 34-22-25-740-054
D. On the ISIS indicator, push the (-) pushbutton switch. The screen becomes
white.
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 602
Aug 01/06
TAI
Subtask 34-22-25-280-051
Subtask 34-22-25-710-052
F. For each screen, if the defective pixels recorded do not obey these
conditions:
- You must not have more than two adjacent failed-on or failed-off pixels
- You must not have more than 5 sets of two adjacent failed-on or
failed-off pixels
- You must not have a white or black line or column, or a line or column
in color
- The total of failed-on and failed-off pixels must not be more than 30
pixels,
replace the ISIS indicator (Ref. TASK 34-22-25-000-001) and (Ref. TASK
34-22-25-400-001).
Then, on the ISIS indicator, push the RST pushbutton switch three times
to come back to the operational page.
Push the (-) pushbutton switch to come back to a normal brightness.
5. Close-up
________
Subtask 34-22-25-410-053
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 603
Aug 01/06
TAI
______________________________________________________________
INDICATOR - ISIS (INTEGRATED STANDBY INSTRUMENT SYSTEM) (22FN)
_________________
CLEANING/PAINTING
TASK 34-22-25-100-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-22-25-869-050
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 701
Aug 01/06
TAI
4. Procedure
_________
Subtask 34-22-25-100-050
CAUTION : BE VERY CAREFUL WHEN YOU CLEAN THE FRONT GLASS OF LCDUS. IT IS
_______
NOT POSSIBLE TO REPLACE THE GLASS. IF YOU CAUSE DAMAGE TO
LCDUS, THE DAMAGE WILL BE PERMANENT.
CAUTION : MAKE SURE THAT YOU OBEY THE INSTRUCTIONS IN THE CLEANING
_______
PROCEDURE THAT FOLLOWS. INCORRECT CLEANING CAN CAUSE DAMAGE TO
THE ANTI-REFLECTIVE COATING.
IT IS NOT PERMITTED TO USE TISSUES SUCH AS KLEENEX TISSUES.
SUCH TISSUES CAN CAUSE LOCAL REMOVAL OF THE SURFACE TREATMENT,
AND THUS HALOS OR SCRATCHES.
ALWAYS APPLY THE CLEANING AGENT TO THE PAD AND NOT TO THE
SCREEN.
R CAUTION : USE ONLY THE SPECIFIED MATERIALS AND OBEY THE INSTRUCTIONS FROM
_______
R THE MANUFACTURERS. OTHER MATERIALS CAN CAUSE DAMAGE TO THE
R SURFACE PROTECTION OF THE COMPONENTS AND THE RELATED AREA.
(2) Move the moist wad (or pad) lightly across the surface of the ISIS
screen (one time only).
(3) If you find again marks or dust on the screen, do steps (1) and (2)
again with a new piece of moist wad (or pad). Do these steps again
until the screen is fully clean.
NOTE : Use a new pad (or wad) each time to prevent scratches that can
____
be caused by a dusty pad.
(4) Dry the ISIS screen with a clean wad (or pad). To do this, move the
clean wad (or pad) lightly across the surface of the screen (one time
only).
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 702
Aug 01/08
TAI
5. Close-up
________
Subtask 34-22-25-942-050
A. Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
223-299, 306-399, 401-499, 34-22-25
Page 703
Feb 01/07
R
TAI
ILS - DESCRIPTION AND OPERATION
_______________________________
1. _______
General
The function of the instrument landing system is to measure deviations
between aircraft flight path and
- glide slope
- runway alignment axis (localizer).
The localizer operates in a frequency band which ranges from 108 MHz to
111.95 MHz.
The glide operates in a frequency band which ranges from 328.6 MHz to 335.4
MHz.
2. Component
__________________
Location
(Ref. Fig. 001)
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
2RT1 RECEIVER-ILS, 1 95VU 121 811 34-36-31
2RT2 RECEIVER-ILS, 2 96VU 122 811 34-36-31
3RT ANTENNA-LOCALIZER 1/2 110 110AL 34-36-11
4RT ANTENNA-GLIDE/SLOPE 1/2 110 110AL 34-36-18
3. __________________
System Description
A. Principle
The principle of the ILS is to receive and demodulate LOC and GLIDE
signals.
An ILS station located near the airport runway transmits these signals.
Each LOC and GLIDE signal consists of two intersecting lobes modulated
with two different frequencies (90 Hz and 150 Hz).
The ILS receiver detects and compares the two radiated modulation signals
(two for LOC and two for GLIDE). The receiver gives the crew a display in
relation to a given descent axis. In addition, the ground station
provides a Morse identification.
B. System Architecture
(Ref. Fig. 002)
The ILS comprises two independent ILS receivers 2RT1 and 2RT2 linked to a
common localizer antenna 3RT and a glide slope antenna 4RT.
The components given after can control the ILS system:
(Ref. Fig. 003)
- the Multipurpose Control and Display Unit 1(2) (MCDU) 3CA1 (3CA2) and
the Flight Management and Guidance Computer 1(2) (FMGC) 1CA1 (1CA2) for
frequency/course selection in normal mode of operation,
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 1
Config-1 Nov 01/07
TAI
ILS - Component Location
Figure 001
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 2
Config-1 Nov 01/07
TAI
ILS - Block Diagram
Figure 002
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 3
Config-1 Nov 01/07
TAI
INTENTIONALLY BLANK
34-36-00
Page 4
Config-1 May 01/05
R
TAI
ILS - Control and Indicating
Figure 003
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 5/6
Config-1 Nov 01/07
TAI
- the Radio Management Panel (RMP) 1RG1 (1RG2) for frequency/course
selection in back-up mode,
- the MCDU and the Centralized Fault Display Interface Unit (CFDIU) 1TW
for test purposes.
The Morse-coded audio identification signals are sent to the Audio
Management Unit (AMU) 1RN. These signals can be heard in the boomset and
on loudspeaker according to the crew selection performed on the CAPT
(F/O) Audio Control Panel (ACP) 2RN1 (2RN2).
The EFIS display units show the ILS data:
- the CAPT Primary Flight Display (PFD) and the F/O Navigation Display
(ND) show the deviations from the ILS1,
- the F/O PFD and the CAPT ND show the deviations from the ILS2.
The MCDU(s) shows the maintenance data.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 7
Config-1 Nov 01/07
TAI
ILS - Data Display
Figure 004
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 8
Config-1 Nov 01/07
TAI
The vertical scale shows a classical glide slope deviation. It is
linear with 2 dots on each side. Two dots correspond to plus (or
minus) 0.175 ddm (150 microA) deviation. The index shows magenta
G/S indication.
Until the glide beam is captured, the glide index is not shown
(Non Computed Data). When the index is against one stop only one
half of it is in view (the outer half index).
The glide slope index and the scale flash permanently in case of
G/S excessive deviation warning.
With a glide fault, the G/S index goes out of view and a red G/S
failure warning message is shown in the middle of the scale.
(Ref. Fig. 005)
LATERAL DEVIATION (item 4)
The horizontal scale shows a classical LOC deviation with 2 dots
on each side. Two dots correspond to plus (or minus) 0.155 ddm
(150 micro A) deviation. The index shows magenta LOC indication.
Until the LOC is captured, the LOC index is not shown (Non
Computed Data). When the index is against one stop, only one half
of it is shown.
The LOC index and the scale flash permanently in case of LOC
excessive deviation warning.
With a localizer fault, the LOC index goes out of view and a red
LOC failure warning message is shown in the middle of the scale.
(Ref. Fig. 005)
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 9
Config-1 Nov 01/07
TAI
ILS - Warning Display
Figure 005
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 10
Config-1 Nov 01/07
TAI
a dagger-shaped pointer points to the selected ILS course. Its
center part is the lateral deviation bar, which can move on a
scale which is perpendicular to the pointer and has 2 dots on
each side. The position of the bar on the scale gives the
localizer deviation. The extreme dots correspond to plus or minus
0.155 ddm (plus or minus 150 micro A). With LOC fault a red LOC
warning message comes into view in the middle of the LOC scale
and the LOC deviation bar goes out of view.
VERTICAL DEVIATION (item 9)
a magenta lozenge gives the glide slope deviation on a vertical
scale at the right of the heading dial if the aircraft is within
the condition of reception of the ILS glide slope signal.
The extreme dots of the vertical scale correspond to plus or
minus 0.175 ddm (plus or minus 150 micro A). With G/S fault, a
red G/S warning message comes into view at the top of the scale
and the index goes out of view.
D. Warnings
(Ref. Fig. 005)
The warnings related to the ILS are :
- local warning on the instruments that use the ILS information
- MASTER CAUT lights on CAPT and F/O glareshield panels
- aural warning : single chime (SC)
- warning message shown on the upper display unit of the ECAM system.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 11
Config-1 Nov 01/07
TAI
4. Power
____________
Supply
(Ref. Fig. 002)
Energization of each system is through 115VAC 400 Hz buses :
- 115VAC ESS BUS 401XP via circuit breaker 1RT1 for system 1
- 115VAC BUS 2 204XP via circuit breaker 1RT2 for system 2
The system is supplied through these circuit breakers:
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/ILS/1 1RT1 G12
121VU COM NAV/ILS/2 1RT2 K09
5. Interface
_________
A. ILS Receiver
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 12
Config-1 Nov 01/07
TAI
ILS Receiver
Figure 006
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 13
Config-1 Nov 01/07
TAI
ILS Receiver - Block Diagram
Figure 007
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 14
Config-1 Nov 01/07
TAI
(a) Localizer receiver unit
The localizer receiver unit receives and detects the localizer
modulated signals in the frequency range from 108.1 to 111.95
MHz.
In approach mode, the RF signal received through the dedicated
antenna is filtered and mixed with the output of the localizer
synthesizer. The synthesizer receives tuning information from the
I/O processor and provides an injection signal which is 21.4 MHz
below the selected frequency.
The resultant 21.4 MHz IF signal is amplified and mixed with a
second injection frequency to produce a 168.5 KHz signal.
After amplification, this second IF signal is applied to an
envelope detector. The output signal is fed to :
- the I/O processor unit for localizer deviation computation
- an audio circuit which extracts the audio identification signal
of the received station. This audio signal is sent to the
aircraft audio integrating system.
Additionally, the localizer receiver includes a self-test
oscillator/modulator which provides, in self-test mode
operation, a modulated RF carrier injected at the input filter
level.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 15
Config-1 Nov 01/07
TAI
- provides fault data to the BITE processor and CFDS ARINC
interface.
The BITE processor :
- receives and decodes control and data words from the CFDIU and
transfers interactive or normal mode data to the I/O processor
- processes data received from the I/O processor for storage in
the non-volatile fault memory.
(3) Operation
Ground station transmitters located near the airports runway
instruments transmit two separate ILS frequencies. Both carrier
frequencies are amplitude modulated with 90 Hz and 150 Hz. The ILS
receiver receives the transmitted ILS signals and compares the
relative strengths of the 90 Hz and 150 Hz carrier modulations to
determine the position of the aircraft relative to the ILS ground
station transmitters. The LOC tuner provides azimuth bearing data.
The GLIDE tuner provides elevation data. Microprocessor circuits
calculate the glide slope and localizer deviations, and output these
signals as digital data words to an ARINC 429 data bus. The data bus
connects the ILS deviations to the cockpit display units.
An audio output signal identifies the selected ILS station.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 16
Config-1 Nov 01/07
TAI
HEX: hexadecimal coded
HYB: mixed code
- ALPHA CODE: indicates the parameter mnemonic code
- SOURCE ORIGIN: parameter source computer or system.
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 033 |ILS FREQ| 108/111.95 |MHZ | | 4 |2560|BCD | | |
| | | 0.01 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 105 |RWY HDG | +/- 180 |DEG | 29 | 11 |160 |BNR | | |
| | | 0.0878 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 173 |LOC DEVN | +/- 0.4 |DDM | 29 | 12 | 80 |BNR | LOC | |
| | | 0.000097 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 174 |G/S DEVN | +/- 0.8 |DDM | 29 | 12 | 80 |BNR | GLS | |
| | | 0.000195 | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 263 |ILS GROUND| | | | 14 |200 |HYB | | |
| |STATION | | | | | | | | |
| |IDENT | | | | | | | | |
| |WORD 1 | | | | | | | | |
| | | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 264 |ILS GROUND| | | | 14 |200 |HYB | | |
| |STATION | | | | | | | | |
| |IDENT | | | | | | | | |
| |WORD 2 | | | | | | | | |
| | | | | | | | | | |
-------------------------------------------------------------------------------
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 17
Config-1 Nov 01/07
TAI
B. Antennas
(Ref. Fig. 008)
6. Component
_____________________
Description
(Ref. Fig. 002)
A. Control
- each ILS receiver is connected to one Radio Management Panel (RMP). The
ILS receiver 1 is connected to the RMP1 (the ILS receiver 2 to the
RMP2). The ILS receiver 1 receives management bus from the FMGC1
through the RMP1 (the ILS receiver 2 from the FMGC2 through the RMP2)
- in normal operation, the FMGC1(2) tunes the ILS 1(2) receiver either
automatically or manually by means of the MCDU1(2). In this case the
RMP1(2) operates as a relay which sends the frequency information from
the FMGC1(2) to the receiver 1(2).
- by a second port, the ILS receiver 1(2) receives a second management
bus (ILS1 FREQ + RWY HDG1 + INTERRO BYTE) directly from the FMGC2(1).
The receiver selects one of the two port functions by a discrete signal
(RMP1 NAV DISC) which is received from the FMGC1(2) through the
RMP1(2).
With fault of one FMGC, the second FMGC can control the two ILS
receivers, one directly, the other through its RMP.
With fault of the RMP1(2) or two RMPs, the concerned RMP is transparent
to data and discrete from FMGC.
In manual operation (at any time, or with fault of two FMGCs) the RMP1
can control the ILS receiver 1 after ON NAV mode selection. Same
possibility for the RMP2 (ILS receiver 2).
(Ref. Fig. 009)
In this mode the RMP1 can control the ILS2 through the RMP2 after ON NAV
mode selection on the RMP2. Same possibility for ILS2 through RMP1.
After any frequency selection it is always necessary to select the
associated course.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 18
Config-1 Nov 01/07
TAI
ILS Antennas
Figure 008
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 19
Config-1 Nov 01/07
TAI
ILS - Frequency and Course Selection in Emergency Mode
Figure 009
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 20
Config-1 Nov 01/07
TAI
- In LAND mode below 700 ft., the FMGC sends a ground signal on the TUNE
TEST INHIBIT discrete to the ILS receiver.
In this case, whether the frequency is sent by the FMGC or by the RMP,
the ILS receiver does not take into account any frequency change.
B. Reconfiguration Switching
In normal utilization, the ILS1 data are shown on the CAPT PFD and the
F/O ND ; the ILS2 data on the F/O PFD and the CAPT ND.
In addition the DMC 1 supplies data to the CAPT PFD and ND ; the DMC 2 to
the F/O PFD and ND.
With fault of the DMC 1(2), it is possible to switch over to the DMC 3
with the EIS DMC selector switch. This selector switch is located on
panel 8VU on the center pedestal. In this case, the DMC 3 totally
replaces the DMC 1(2) through the stage of the output switching relay of
the failed DMC. With fault of the PFD, there is an automatic transfer of
the PFD image onto the ND.
With fault of the ND, you obtain the transfer of the ND image onto the
PFD when you push the PFD/ND XFR pushbutton switch on panel 301VU
(500VU).
When you set the PFD potentiometer to OFF on panel 301VU (500VU), this
causes :
- deactivation of the PFD
- transfer of the PFD image onto the ND.
7. _________
Operation
(Ref. Fig. 010)
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 21
Config-1 Nov 01/07
TAI
ILS - Maintenance Test Procedure
Figure 010
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 22
Config-1 Nov 01/07
TAI
(2) Progress of power-up tests
- Duration: 1 s.
- Cockpit repercussions directly linked to power-up test
accomplishment (some other repercussions may occur depending on the
A/C configuration but these can be disregarded):
- MASTER CAUT light on
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 23
Config-1 Nov 01/07
TAI
ILS ((MMR)) - DESCRIPTION AND OPERATION
_______________________________________
1. _______
General
The primary function of the Multi-Mode Receiver (MMR) is to receive and
process Instrument Landing System (ILS) and Global Positioning System (GPS)
signals. The MMR is a navigation sensor with two internal receivers.
A. ILS Receiver
The function of the ILS is to provide the crew and airborne system users
with lateral (LOC) and vertical (G/S) deviation signals, with respect to
the approach ILS radio beam transmitted by a ground station.
The localizer operates in a frequency band which ranges from 108.1 MHz to
111.95 MHz and the glide uses the band from 329.15 MHz to 335 MHz as
defined by ARINC specification 710.
B. GPS Receiver
The GPS is a radio aid to worldwide navigation which provides:
- the crew with a readout of accurate navigation information, e.g.
position, track and speed
- the Flight Management and Guidance Computer (FMGC) with position
information, after hybridization in the Air Data/Inertial Reference
Unit (ADIRU) with inertial parameters, for accurate position fixing.
2. Component
__________________
Location
(Ref. Fig. 001)
The MMR system units are located in the aircraft as follows.
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
40RT1 MMR-1 95VU 120 811 34-36-31
40RT2 MMR-2 96VU 120 811 34-36-31
3RT ANTENNA-LOCALIZER 1/2 110 110AL 34-36-11
4RT ANTENNA-GLIDE/SLOPE 1/2 110 110AL 34-36-18
43RT1 ANTENNA-GPS ACTIVE, 1 210 831 34-36-16
43RT2 ANTENNA-GPS ACTIVE, 2 210 831 34-36-16
3. System
__________________
Description
(Ref. Fig. 002, 003)
The A/C comprises two independent MMRs, 40RT1 and 40RT2, linked to:
- a common localizer antenna 3RT
- a common glide/slope antenna 4RT
- a GPS active antenna 43RT1 (linked to MMR1)
- a GPS active antenna 43RT2 (linked to MMR2).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 1
Config-2 Nov 01/08
TAI
MMR - Component Location
Figure 001
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 2
Config-2 Nov 01/08
TAI
MMR - Monitoring and Display
Figure 002
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 3
Config-2 Nov 01/08
TAI
MMR - Data Acquisition
Figure 003
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 4
Config-2 Nov 01/08
TAI
A. ILS Operation
The equipment given below can control the ILS operation:
- the Multipurpose Control and Display Units (MCDU) and the Flight
Management and Guidance Computers (FMGC) for frequency/course selection
in normal operating mode.
- the Radio Management Panels (RMPs) for frequency/course selection in
back-up mode.
The ILS data are shown on the EFIS displays:
- the CAPT Primary Flight Display (PFD) and F/O Navigation Display (ND)
show the deviations from the ILS1.
- the F/O PFD and CAPT ND show the deviations from the ILS2.
The Morse-coded audio identification signals are sent to the Audio
Management Unit (AMU). These signals can be heard in the boomset and on
the loudspeaker according to the selection by the crew on the Audio
Control Panel (ACP).
B. GPS Operation
The Inertial Reference (IR) portion of the ADIRU 1(2) provides the
FMGC 1(2) with:
- pure IR data
- pure GPS data (in this case the ADIRU operates as a relay)
- hybrid GPIR data.
The hybrid GPIR 1(2) data are used by the FMGC 1(2) for position
fixing purposes.
The pure GPS data are used for display on the MCDU 1 and 2.
In case of one GPS failure, the three ADIRUs automatically select the
only operative GPS to compute hybrid GPIR data.
In case of ADIRU 1 failure, the FMGC 1 uses ADIRU 3/GPS 1 data.
In case of ADIRU 2 failure, the FMGC 2 uses ADIRU 3/GPS 2 data.
In case of failure of two ADIRUs, the two FMGCs use only the
operative ADIRU.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 5
Config-2 Nov 01/08
TAI
This ADIRU receives data from its own side GPS (e.g. ADIRU 1 - GPS
1).
C. Maintenance Operation
The MMR system provides the Centralized Fault Display Interface Unit
(CFDIU) with an interface for onboard testing and fault reporting
purposes. The MCDUs show the maintenance data.
4. Power
____________
Supply
Each MMR system is energized through 115VAC busbars as follows:
- 401XP for system 1
- 204XP for system 2.
The system is supplied through these circuit breakers:
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/MMR/1 42RT1 G12
5. Interface
_________
A. ILS Interface
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 6
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 173 | LOCALIZER|+ or - 0.155| DDM| 29 | 12 | 50 | BNR| | |
| | DEVIATION| | | | | ms | | | |
| | | | | | | | | | |
| 174 | GLIDE |+ or - 0.175| DDM| 29 | 12 | 50 |BNR | | |
| | SLOPE | | | | | ms | | | |
| | DEVIATION| | | | | | | | |
| | | | | | | | | | |
| 033 | ILS |FROM 108.10 |MHz | | 15 |200 |BCD | | |
| | FREQUENCY| TO 111.95 | | | | ms | | | |
| | | | | | | | | | |
| 017 | RUNWAY | FROM 0 TO |Deg.| | 15 |300 |BCD | | |
| | HEADING | 359.9 | | | | ms | | | |
| | | | | | | | | | |
| 105 | RUNWAY | FROM 0 TO |Deg.| | 11 |300 |BNR | | |
| | HEADING | 359.9 | | | | ms | | | |
| | | | | | | | | | |
| 263 |ILS GROUND| | | | 14 |150 |HYB | | |
| | STATION | | | | | ms | | | |
| | IDENT | | | | | | | | |
| | | | | | | | | | |
| 264 |ILS GROUND| | | | 14 |150 |HYB | | |
| | STATION | | | | | ms | | | |
| | IDENT | | | | | | | | |
| | | | | | | | | | |
| 271 | MMR | | | | 19 |400 |DISC| | |
| | DISCRETE | | | | | ms | | | |
-------------------------------------------------------------------------------
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 7
Config-2 Nov 01/08
TAI
B. GPS Interface
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | |
| 060 | MEASURE- | Pack | N/A| N/A| | 1s | | |
| | MENT STS | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | |+/-268435456| | | | | | |
| 061 | PSEUDO | 256 | M | 20 | | 1s |BNR | |
| | RANGE | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 062 | PSEUDO | 256 | M | 11 | | 1s |BNR | |
| | RANGE | 0.125 | | | | | | |
| | FINE | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 063 | RANGE | +/-4096 | M/S| 20 | | 1s |BNR | |
| | RATE | 0.0039 | | | | | | |
| | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | | | | | | | |
| 064 | DELTA | +/-4096 | M | 20 | | 1s |BNR | |
| | RANGE | 0.0039 | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | | | | | | | |
| 065 | SV POS X | +/-67108864| M | 20 | | 1s |BNR | |
| | | 64 | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | | | | | | | |
| 066 | SV POS X | 64 | M | 14 | | 1s |BNR | |
| | FINE | 0.0039 | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | +/-67108864| | | | | | |
| 070 | SV POS Y | 64 | M | 20 | | 1s |BNR | |
| | | | | | | | | |
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 8
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | | | | | | | |
| 071 | SV POS Y | 64 | M | 14 | | 1s |BNR | |
| | FINE | 0.0039 | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | | | | | | | |
| 072 | SV POS Z | +/-67108864| M | 20 | | 1s |BNR | |
| | | 64 | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | | | | | | | |
| 073 | SV POS Z | 64 | M | 14 | | 1s |BNR | |
| | FINE | 0.0039 | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | UTC MEA- | 10.0 | | | | | | |
| 074 | SURE TIME| 9.536743 | S | 20 | | 1s |BNR | |
| | | micro sec | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | GPS ALT | +/-131072 | | | | | | |
| 076 | (MSL) | 0.125 | Ft | 20 | | 1s |BNR | |
| | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | 1024 | | | | | | |
| 101 | HDOP | 0.031 | N/A| 15 | | 1s |BNR | |
| | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | 1024 | | | | | | |
| 102 | VDOP | 0.031 | N/A| 15 | | 1s |BNR | |
| | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | GPS TRACK| +/-180 | | | | | | |
| 103 | ANGLE | 0.0055 | Deg| 15 | | 1s |BNR | |
| | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | GPS | +/-180 | | | | | | |
| 110 | LATITUDE | 0.000172 | Deg| 20 | | 1s |BNR | |
| | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | GPS | +/-180 | | | | | | |
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 9
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 111 | LONGITUDE| 0.000172 | Deg| 20 | | 1s |BNR | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | GPS | 4096 | | | | | | |
| 112 | GROUND | 0.125 | Kts| 15 | | 1s |BNR | |
| | SPEED | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | GPS | 0.000172 | | | | | | |
| 120 | LATITUDE | 8.38 E-8 | Deg| 11 | | 1s |BNR | |
| | FINE | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | GPS | 0.000172 | | | | | | |
| 121 | LONGITUDE| 8.38 E-8 | Deg| 11 | | 1s |BNR | |
| | FINE | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 125 | UTC | 23:59.9 |HR: | 5 | | 1s |BCD | |
| | | 0.1 MIN |MIN | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| |HORIZONTAL| 16 | NM | 17 | | 1s |BNR | |
| 130 | INTEGRITY| 0.00012 | | | | | | |
| | LIMIT | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | VERTICAL | 32768 | Ft | 17 | | 1s |BNR | |
| 133 | INTEGRITY| 0.25 | | | | | | |
| | LIMIT | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | VERTICAL | 32768 | | | | | | |
| 136 | FIGURE | 0.125 | Ft | 18 | | 1s |BNR | |
| | OF MERIT | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | 1.0 | | | | | | |
| 140 | UTC FINE | 0.9536743 | S | 20 | | 1s |BNR | |
| | | micro sec | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | UTC FINE | 0.953674 | S | 10 | | 1s |BNR | |
| 141 | FRACTIONS| micron s | | | | | | |
| | | 0.9313225ns| | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | APPROACH | 16 | NM | 17 | | 1s |BNR | |
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 10
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 143 | AREA | 0.00012 | | | | | | |
| | HIL | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | APPROACH | 32768 | Ft | 17 | | 1s |BNR | |
| 144 | AREA | 0.25 | | | | | | |
| | HIL | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | |HR: | | | | | |
| 150 | UTC | 23:59:59 |MIN:| 17 | | 1s |BNR | |
| | | 1.0 s |S | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 162 | DEST | 23:59 |HR: | 11 | |0.5s|BNR | |
| | ETA | 1 MIN |MIN | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 163 | ALT | 23:59 |HR: | 11 | |0.5s|BNR | |
| | WAYPNT | 1 MIN |MIN | | | | | |
| | ETA | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | VERTICAL | +/-32768 | Ft/| | | | | |
| 165 | VELOCITY | 1.0 | Mn | 15 | | 1s |BNR | |
| | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | N/S | +/-4096 | | | | | | |
| 166 | VELOCITY | 0.125 | Kts| 15 | | 1s |BNR | |
| | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | E/W | +/-4096 | | | | | | |
| 174 | VELOCITY | 0.125 | Kts| 15 | | 1s |BNR | |
| | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 226 | DATA | N/A |N/A |N/A | |N/A |ISO | |
| | LOADER | | | | | |#5 | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| |HORIZONTAL| 16 | | | | | | |
| 247 | FIGURE | 6.1E-5 | NM | 18 | | 1s |BNR | |
| | OF MERIT | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | | N/A |DAY:| | | | | |
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 11
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 260 | DATE | 1 Day |MON:| 6 | | 1s |BCD | |
| | | |YEAR| | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | GPS | | | | | | | |
| 273 | SENSOR | N/A |N/A |N/A | | 1s |DISC| |
| | STATUS | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 343 | DEST | 16 |NM | 11 | |0.5s|BNR | |
| | HIL | 0.0078 | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | ALT | | | | | | | |
| 347 | WAYPNT | 16 |NM | 11 | |0.5s|BNR | |
| | HIL | 0.0078 | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 354 | GPSSU | N/A |N/A |N/A | | |ISO | |
| | IDENT | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| 356 | MAINT | N/A |N/A |N/A | | |ISO | |
| | DATA | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-------------|
| | EQUIP- | | | | | | | |
| 377 | MENT | N/A |N/A |N/A | | 1s |BCD | |
| | ID | | | | | | | |
-------------------------------------------------------------------------------
6. _____________________
Component Description
A. MMR
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 12
Config-2 Nov 01/08
TAI
MMR - External Description
Figure 004
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 13
Config-2 Nov 01/08
TAI
- LRU STATUS (green) indicates that no internal fault is detected
during the front panel self-test sequence
- CONTROL FAIL (red) indicates that no control input is available
during the test sequence.
- ANT FAIL (red) indicates that a failed antenna is detected during
the test sequence.
The back of the MMR is equipped with one ARINC 600 size one
connector, which includes three plugs:
- Top Plug (TP): connection with the GPS antenna
- Middle Plug (MP): service interconnection
- Bottom Plug (BP): connection with the power supply circuit, and the
LOC and G/S coaxial interconnections.
- Power supply
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 14
Config-2 Nov 01/08
TAI
MMR - Block Diagram
Figure 005
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 15
Config-2 Nov 01/08
TAI
The aircraft supplies the 115 VAC, 400 Hz, single phase power to
the MMR. The input power is routed from the rear interconnect to
the forward power supply. The forward power supply provides power
factor corrections, and outputs +200 VDC for the aft power supply.
The aft power supply steps the +200 VDC down to +/- 6.5 and +/-
13.5 VDC outputs. These unregulated voltages are routed to the
other subassemblies where they are post-regulated to +/- 5 VDC and
+/- 12 VDC. Post-regulation provides a level of separation between
the subassemblies and possible noise on the power lines. It will
also allow shut-off of the circuit areas when not needed for a
specific phase of flight (not used today).
- ILS Receiver
The MMR receives VHF localizer and UHF glideslope signals at the
antenna jacks in the bottom plug of the rear connector. Coaxial
cables route the RF from the rear connector to the ILS receiver.
The ILS receiver includes four functional areas: VHF receiver, UHF
receiver, primary instrumentation processor, and monitor
instrumentation processor.
The VHF receiver filters, mixes and amplifies VHF signals. The
resulting intermediate frequency signals are converted into serial
data and processed by both the primary and the monitor
instrumentation circuits. The UHF receiver filters, mixes,
amplifies, and detects UHF signals. The detected signals are
converted into serial data and processed by the instrumentation
processors. The primary instrumentation processor outputs flight
path deviations to the system processor. The system processor
forwards the flight path deviations to the aircraft instrumentation
and auto-pilot computers (FMGC).
The monitor instrumentation processor performs a validity check of
the primary instrumentation processor deviation output, and
disables the outputs if the check fails. The primary and monitor
instrumentation processors use ARINC 429 buses for
intercommunications and for communications with the system
processor.
- GPS Receiver
The MMR receives RF signals through an active GPS antenna
(preamplifier implemented within the antenna). The GPS receiver
filters, mixes, and performs analog-to-digital conversions. The
resulting data is processed by microprocessors that output
position, velocity, time, and integrity data to the system
processor. The system processor transmits ARINC 743A-compliant data
for use by other aircraft systems. The GPS receiver also outputs a
time mark discrete signal that tells users of the ARINC 743A data
the instant in time when the position solution is valid.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 16
Config-2 Nov 01/08
TAI
- System Processor
The system processor controls the flow of data to the ILS and GPS
receivers including mode and frequency selections, GPS
initialization, and maintenance data requests. The system processor
also controls the transmission of output data including ILS
deviation, GPS position, velocity, time, integrity, time marks and
maintenance data. Circuitry on the system processor converts
received data from serial into parallel and also formats parallel
data to serial data for transmission on the bus.
B. GPS Antenna
(Ref. Fig. 006)
Two L-Band antennas are mounted on the top of the fuselage, at the
centerline, to receive signals from the GPS satellites. The GPS antenna
is an active antenna with an integrated preamplifier and filter. It
receives GPS signals at 1575.42 MHz and matches to a 50 ohms coaxial
cable at the input to the MMR. The antenna has a right-hand circular
polarized and omnidirectional radiation pattern.
The power supply of the preamplifier is provided by the MMR through the
coaxial cable.
C. Localizer Antenna
(Ref. Fig. 007)
The localizer antenna is an airborne antenna used to receive LOC signals
in the 108-112MHz range. It is a folded half-loop type driven by
capacitive coupling. The antenna has two independent RF connectors used
to feed two independent ILS receivers. Connector separation is provided
by a hybrid junction in the antenna.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 17
Config-2 Nov 01/08
TAI
GPS Active - Antenna
Figure 006
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 18
Config-2 Nov 01/08
TAI
ILS - Antennas
Figure 007
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 19
Config-2 Nov 01/08
TAI
7. Operation
_________
A. ILS Operation
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 20
Config-2 Nov 01/08
TAI
MMR - Control and Indicating
Figure 008
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 21
Config-2 Nov 01/08
TAI
MMR - ILS - Course and Frequency Selection in Manual Mode
Figure 009
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 22
Config-2 Nov 01/08
TAI
In this case, the DMC 3 totally replaces the DMC 1(2) through the
stage of the output switching relay of the failed DMC. With failure
of the PFD, there is an automatic transfer of the PFD image onto the
ND.
With failure of the CAPT (F/O) ND, you obtain the transfer of the ND
image onto the CAPT (F/O) PFD when you push the PFD/ND XFR pushbutton
switch on panel 301VU (500VU).
When you set the PFD potentiometer to OFF on the panel 301VU (500VU)
this causes:
- deactivation of the CAPT (F/O) PFD
- transfer of the PFD image onto the CAPT (F/O) ND.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 23
Config-2 Nov 01/08
TAI
MMR - ILS Data Display
Figure 010
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 24
Config-2 Nov 01/08
TAI
At the top section of the PFD a Flight Mode Annunciator shows the
various armed/active longitudinal and lateral modes:
(item 1): the G/S longitudinal modes are shown in the 2nd column
(cyan for armed or green for active)
(item 2): the LOC longitudinal modes are shown in the 3rd column
(cyan for armed or green for active)
VERTICAL DEVIATION (item 3)
The vertical scale shows a classical glide slope deviation. It is
linear with 2 dots on each side. Two dots correspond to plus (or
minus) 0.175 ddm (150 microA) deviation. The index shows magenta
G/S indication.
Until the glide beam is captured, the glide index is not shown
(No Computed Data). When the index is against one stop only one
half of it is in view (the outer half index).
The glide slope index and the scale flash permanently in case of
G/S excessive deviation warning.
With a glide fault, the G/S index goes out of view and a red G/S
failure warning message is shown in the middle of the scale.
(Ref. Fig. 011)
LATERAL DEVIATION (item 4)
The horizontal scale shows a classical LOC deviation with 2 dots
on each side. Two dots correspond to plus (or minus) 0.155 ddm
(150 microA) deviation. The index shows magenta LOC indication.
Until the LOC is captured, the LOC index is not shown (No
Computed Data). When the index is against one stop, only one half
of it is shown.
The LOC index and the scale flash permanently in case of LOC
excessive deviation warning.
With a localizer fault, the LOC index goes out of view and a red
LOC failure warning message is shown in the middle of the scale.
(Ref. Fig. 010, 011)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 25
Config-2 Nov 01/08
TAI
MMR - ILS Warning Display
Figure 011
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 26
Config-2 Nov 01/08
TAI
The ND shows the indications given after, when available, in its
right top corner (item 8):
- the side of the displayed ILS receiver
- the frequency
- the course
- the identification.
The ND shows the ILS APP message in its center top section (item
7) when the pilot has selected the ILS approach on the MCDU.
LATERAL DEVIATION (item 6)
A dagger-shaped pointer points to the selected ILS course. Its
center part is the lateral deviation bar, which can move on a
scale which is perpendicular to the pointer and has two dots on
each side. The position of the bar on the scale gives the
localizer deviation. The extreme dots correspond to plus or minus
0.155 ddm (plus or minus 150 microA). With LOC fault a red LOC
warning message comes into view in the middle of the LOC scale
and the LOC deviation bar goes out of view.
VERTICAL DEVIATION (item 9)
A magenta lozenge gives the glide slope deviation on a vertical
scale at the right of the heading dial if the aircraft is within
the condition of reception of the ILS glide slope signal.
The extreme dots of the vertical scale correspond to plus or
minus 0.175 ddm (plus or minus 150 microA). With G/S fault, a red
G/S warning message comes into view at the top of the scale and
the index goes out of view.
(7) Warnings
(Ref. Fig. 011)
The warnings related to the ILS are:
- local warning on the instruments that use the ILS information
- MASTER CAUT lights on CAPT and F/O glareshield panels
- aural warning: single chime (SC)
- warning message shown on the upper display unit of the ECAM system.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 27
Config-2 Nov 01/08
TAI
B. GPS Function
(a) General
To reduce initialization time, the MMR 1(2) receives position
data, LAT/LONG (labels 310/311) from the ADIRU 1(2) and SET LAT,
SET LONG (labels 041, 042) UTC/Date from the FMGC 1(2) through
the ADIRU 1(2).
Each MMR receives the GPS satellite RF signals from the active
antenna to compute and provide the three ADIRUs with:
- UTC, date
- position, altitude
- ground speed, track angle
- N/S speed, E/W speed, vertical speed
- horizontal and vertical dilution of precision, figure of merit
- satellite position
- satellite measurement (pseudo-range, delta range, range rate,
UTC measurement time)
- GPS measurement status, sensor status
- real time and predictive integrity data.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 28
Config-2 Nov 01/08
TAI
- Inertial only.
The GPIR/INERTIAL mode is selected as long as the following
conditions are satisfied:
- GPIR position is available and with an estimated accuracy
consistent with the intended operation.
- GPIR integrity is available and compatible with the applicable
phase of flight requirement.
As long as the GPS/INERTIAL mode is active, no DME/DME or
VOR/DME radio updating is allowed. However, LOC updating can
apply to GPS/INERTIAL position.
In this navigation mode, N IR/GPS indication is displayed on
the POSITION MONITOR page with N being the number of IRs used
to compute mixed IR position.
The selected hybrid GPIRS position is displayed on the POSITION
MONITOR page in place of the radio position.
The mixed IR position and the IR deviations displayed on the
POSITION MONITOR page do not change and are still computed
using pure IR inputs.
Aircraft position is generated by a series of filters which use
inertial position, GPIR position or radio position, and
aircraft velocity as input.
A position bias is computed once every second through the
position bias filter. This position bias is computed as the
difference between the GPIR position (or radio position) and
the inertial position.
The aircraft position is finally computed every 200 ms based on
the corrected inertial position and the aircraft velocity using
the aircraft position filter.
The GPS/INERTIAL mode can be manually inhibited by pushing the
line key adjacent to the DESELECT GPS indication on the
SELECTED NAVAIDS page.
(Ref. Fig. 012)
FMGC computed integrity:
When the GPIR position is available in the FMGC but the GPIR
integrity is not delivered by the ADIRS, the FMGC is capable of
computing an equivalent integrity called AIM (Alternate
Integrity Monitoring), using IR data, during a limited period
of time. The goal of this FMGC functionality is to improve the
availability of the GPS Primary function in the cockpit.
1
_ If a GPS signal is present and valid when the power is on, the
clock synchronizes on the GPS time using labels 150 and 260.
2
_ If the signal is not present during synchronization, the clock
dispalys dashes on all the digits.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 29
Config-2 Nov 01/08
TAI
MMR - GPS SELECTED NAVAIDS Page on MCDU
Figure 012
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 30
Config-2 Nov 01/08
TAI
3
_ If the signal is present but not valid during synchronization,
the clock indicates 00:00:00.
4
_ If the signal becomes not valid after synchronization, the
clock runs on its internal time base.
1
_ GPS MONITOR
(Ref. Fig. 013)
The GPS data are displayed on the GPS MONITOR page of the
MCDU.
To get the GPS MONITOR page, push the DATA key on the MCDU,
then the line key adjacent to the GPS MONITOR indication.
The upper part is dedicated to GPS 1 data, the lower part to
GPS 2 data.
The following data are displayed:
- GPS position (lat/long)
- true track
- GPS altitude
- figure of merit (in meters)
- ground speed
- number of satellites tracked
- mode.
2
_ PREDICTIVE GPS
(Ref. Fig. 014)
The integrity prediction results given by the GPS portion of
the MMR on Flight Management System (FMS) request are
displayed on the PREDICTIVE GPS page of the MCDU (from the
progress page which displays required navigation accuracy and
estimated position accuracy and GPS PRIMARY indication).
The prediction concerns the destination (DEST) and any pilot
entered waypoint (WPT) and the integrity availability (HIL <
0.3 Nm) is displayed by Yes (Y) or No (N) for the seven times
defined by the five minutes increments for plus or minus 15
minutes around DEST or WPT.
3
_ Progress page
The progress page indicates whether the GPS is used by the
FMGC for navigation. If it is used, the GPS PRIMARY indication
is displayed. If it is not used, the GPS PRIMARY LOST message
is shown.
4
_ MCDU scratchpad
GPS PRIMARY in white or GPS PRIMARY LOST in amber show on the
MCDU scratchpad.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 31
Config-2 Nov 01/08
TAI
GPS - GPS MONITOR Page on MCDU
Figure 013
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 32
Config-2 Nov 01/08
TAI
GPS - PREDICTIVE GPS Page
Figure 014
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 33
Config-2 Nov 01/08
TAI
5
_ SELECTED NAVAIDS page
It is possible to select GPS for navigation computation within
the FMS on the SELECTED NAVAIDS page.
If you deselected GPS, the message GPS IS DESELECTED appears
on the MCDU when a GPS approach starts.
6
_ ARRIVAL page
To select a GPS approach, use the ARRIVAL page.
1
_ Display of GPS PRIMARY LOST amber message
This message is displayed at the bottom of the image in all
the ND modes (except engine standby modes) when the GPS
primary is lost (this message cannot be cleared from the
MCDU). In this case, the GPS is not used for navigation
(accuracy and integrity for the intended operation can still
be met by the use of alternate navigation means).
2
_ Display of GPS PRIMARY white message
This message is displayed at the bottom of the image in all
the ND modes (except engine standby modes) when the GPS
becomes primary (this message can be cleared from the MCDU).
3
_ Display of GPS APP green message
This approach message is displayed at the top of the image in
all the ND modes (except engine standby modes) when a GPS
approach is selected in the flight plan.
(2) Warning
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 34
Config-2 Nov 01/08
TAI
MMR - GPS Data Displayed on the NDs
Figure 015
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 35
Config-2 Nov 01/08
TAI
(b) Loss of the GPS primary navigation
When the GPS navigation is lost for any reason, the navigation
function is degraded and reverts to the traditional navigation
function with IRS positions and radio positions if available (in
this case the RNP (Required Navigation Performance) features are
still available).
Warnings are generated to indicate the loss of GPS PRIMARY
navigation:
- GPS PRIMARY LOST message on the NDs (cannot be cleared) and
MCDU (can be cleared)
- in case of GPS non-precision approach, an aural alert is
generated (Triple Click)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 36
Config-2 Nov 01/08
TAI
8. _____________
BITE Function
A. CFDIU Interface
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 37
Config-2 Nov 01/08
TAI
MMR - Maintenance Test Procedure
Figure 016
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 38
Config-2 Nov 01/08
TAI
All the information displayed on the MCDU during the BITE Test
configuration can be printed by the printer (Ref. 31-35-00).
The MMR menu mode is composed of:
- LAST LEG REPORT
(Ref. Fig. 017)
This menu contains the fault messages (class 1 internal and
external) detected during the last flight.
- PREVIOUS LEGS REPORT
(Ref. Fig. 018)
This report contains the fault messages related to the external
or internal failures (class 1) recorded during the previous 63
flight legs.
- LRU IDENTIFICATION
(Ref. Fig. 019)
Allows to display the P/N, the serial number and the software
number of the equipment.
- GND SCANNING
(Ref. Fig. 020)
Based on the monitoring and fault analysis during flight,
provides information of the failures detected while using this
function.
- TROUBLE SHOOTING DATA
(Ref. Fig. 021)
Provides correlation parameters and snapshot data concerning
the failure displayed in the LAST LEG REPORT and PREVIOUS LEGS
REPORT.
- CLASS 3 FAULTS
(Ref. Fig. 022)
Allows to display the class 3 faults recorded during the last
flight leg.
- GROUND REPORT
(Ref. Fig. 023)
Allows to present the class 1 or 3 internal failures detected
on ground.
- SYSTEM TEST
(Ref. Fig. 024, 025)
Allows a check of the correct operation of the MMR.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 39
Config-2 Nov 01/08
TAI
MMR - Last Leg Report
Figure 017
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 40
Config-2 Nov 01/08
TAI
MMR - Previous Legs Report
Figure 018
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 41
Config-2 Nov 01/08
TAI
MMR - LRU Identification
Figure 019
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 42
Config-2 Nov 01/08
TAI
MMR - Ground Scanning
Figure 020
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 43
Config-2 Nov 01/08
TAI
MMR - Trouble Shooting Data
Figure 021
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 44
Config-2 Nov 01/08
TAI
MMR - Last Leg Class 3 Faults
Figure 022
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 45
Config-2 Nov 01/08
TAI
MMR - Ground Report
Figure 023
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 46
Config-2 Nov 01/08
TAI
MMR - System Test
Figure 024
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 47
Config-2 Nov 01/08
TAI
MMR - System Test
Figure 025
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 48
Config-2 Nov 01/08
TAI
(3) Reporting function
The tables below give the list of internal/external failures.
-----------------------------------------------------------------------------
I ATA I CLASS I MESSAGE I
I I (A/C) I I
I----------------------------------------------------------------------------
I 34-36-31 I 1 I MMRi (40RTi) I
I 34-36-11 I 1 I LOCALIZER ANTENNA (3RT)/COAX CABLE/MMRi(40RTi) I
I 34-36-18 I 1 I GLIDE ANTENNA (4RT)/COAX CABLE/MMRi (40RTi) I
I 34-36-16 I 1 I GPS ANTENNAi (43RTi)/COAX CABLE/MMRi(40RTi) I
I I I i = (1,2) I
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
I ATA I CLASS I MESSAGE I
I I (A/C) I I
-----------------------------------------------------------------------------
I 31-32-34 I 3 I CFDIU (1TW)/MMRi (40RTi) I
I 22-83-34 I 3 I FMGCi (1CAi)/RMPi (1RGi)/MMRi (40RTi) I
I 22-83-34 I 3 I FMGCj (1CAj) BUS ILS/MMRi (40RTi) I
I 22-83-34 I 3 I FMGC1 (1CA1) BUS GPS/MMRi (40RTi) I
I 22-83-34 I 3 I FMGC2 (1CA2) BUS GPS/MMRi (40RTi) I
I 34-12-34 I 3 I ADIRUk (1FPk)/MMRi (40RTi) I
I 32-31-71 I 3 I LGCIUi (5GAi)/FMGCi (1CAi)/MMRi (40RTi) I
I 31-62-34 I 1 I DMCi (1WTi)/MMRi (40RTi) I
I I I j,i = (1,2) or (2,1) I
I I I k = 1, 2 or 3 I
-----------------------------------------------------------------------------
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 49
Config-2 Nov 01/08
TAI
(4) Interactive function
To gain access to the BITE, it is necessary to use one MCDU (Ref.
22-82-00).
(Ref. Fig. 017, 018, 019, 020, 021, 022, 023, 024, 025)
All the information displayed on the MCDU during the BITE TEST
configuration can be printed by the printer (Ref. 31-35-00).
B. BITE Implementation
-----------------------------------------------------------------------------
I SEQUENCE I LRU STATUS I CONTROL I ANT FAIL I I TIME I
I NO. I LED (DS1) I FAIL LED I LED I DEFINITION I DEFINITION I
I I I (DS2) I (DS3) I I I
I---------------------------------------------------------------------------I
I 1 I Red I Red I Red I LED self- I 2 seconds I
I I I I I test I I
I---------------------------------------------------------------------------I
I 2 I Green I Red I Red I LED self- I 2 seconds I
I I I I I test I I
I---------------------------------------------------------------------------I
I 3 I Off I Off I Off I Unit self- I 2 seconds I
I I I I I test I minimum I
I---------------------------------------------------------------------------I
I 4 I Green I Off I Off I Unit passedI 30 seconds I
I I-------------------------------------------------I I
I I Red I I I Unit I I
I I I I I failed I I
I I-------------------------------------------------I I
I I I Red I I Control I I
I I I I Iinput failedI I
I I-------------------------------------------------I I
I I I I Red I Antenna I I
I I I I I failed I I
I---------------------------------------------------------------------------I
I 5 I Off I Off I Off I Test I Until next I
I I I I I complete I requested I
I I I I I I self-test I
-----------------------------------------------------------------------------
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 50
Config-2 Nov 01/08
TAI
(2) Activation of the functional test
The functional test can be activated by pushing the line key adjacent
to the TEST indication on the MMR maintenance sub-menu.
It is similar to the receiver face test except that the receiver face
LEDs are not controlled to reflect the status of the unit, which is
reported on the MCDU.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 51
Config-2 Nov 01/08
TAI
ILS - ADJUSTMENT/TEST
_____________________
TASK 34-36-00-740-002
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
R NOTE : If you have a COLLINS ILS-720 receiver, you must do the BITE test of the
____
R ILS two times (one immediately after the other).
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-36-00-860-054
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 501
Config-1 Aug 01/08
TAI
(3) On the center pedestal, on the RMP1 and RMP2:
- set the ON/OFF switch to ON.
- push the NAV and then the ILS pushbutton switches (the green LEDs
on these pushbutton switches come on).
- on the RMP1 or RMP2:
set a non local frequency of the ILS1 (ILS2) beacon.
(Ref. Fig. 501/TASK 34-36-00-991-001)
Subtask 34-36-00-865-057
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/ILS/1 1RT1 G12
121VU COM NAV/ILS/2 1RT2 K09
4. Procedure
_________
NOTE : The ILS1 shows indications on the CAPT PFD and the F/O ND. The ILS2
____
shows indications on the F/O PFD and the CAPT ND.
Subtask 34-36-00-740-051
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the mode selector switches On the CAPT and F/O NDs:
to ROSE/ILS. - the LOC and G/S scales and the course
pointer come into view.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 502
Config-1 Nov 01/07
TAI
ILS - Frequency and Course Selection
Figure 501/TASK 34-36-00-991-001
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 503
Config-1 Nov 01/07
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to A fault indication comes into view for
the ILS1 (ILS2) indication then approximately 3 seconds:
push the line key adjacent to - On the CAPT (F/O) PFD:
the TEST indication. . the LOC scale goes out of view.
. the LOC flag replaces the scale.
. the G/S scale goes out of view.
. the G/S flag comes into view on the
right side of the sphere.
. the ILS1 (ILS2) flag comes into
view in the left lower corner.
- On the F/O (CAPT) ND:
. the LOC scale stays in view.
. the LOC flag comes into view in the
middle of the heading dial.
. the G/S scale stays in view.
. the G/S flag comes into view in the
middle of the scale.
. the ILS1 (ILS2) flag comes into
view in the right upper corner.
- On the glareshield:
. the MASTER CAUT lights come on.
- On the upper ECAM display unit:
* the NAV ILS 1(2) FAULT indication
comes into view.
- In the loud speakers:
. you can hear the single chime.
An NCD indication comes into view for
approximately 2 seconds:
- On the CAPT (F/O) PFD:
. the LOC flag goes out of view.
. the LOC scale comes into view.
. the G/S flag goes out of view.
. the G/S scale comes into view.
. the ILS1 (ILS2) goes out of view.
- On the F/O (CAPT) ND:
. the LOC flag goes out of view.
. the G/S flag goes out of view.
. the ILS1 (ILS2) flag goes out of
view.
- On the glareshield:
. the MASTER CAUT lights go off.
- On the upper ECAM display unit:
. the NAV ILS 1(2) FAULT indication
goes out of view.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 504
Config-1 Nov 01/07
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
A deviation up and to the left side
comes into view for approximately 3
seconds:
- On the CAPT (F/O) PFD:
. the LOC index comes into view and
moves 1 point to the left side.
. the G/S index comes into view and
moves up 1 point.
- On the F/O (CAPT) ND:
. the LOC deviation bar comes into
view and moves 1 point to the left
side.
. the G/S index comes into view and
moves up 1 point.
A deviation down and to the right side
comes into view for approximately 6
seconds:
- On the CAPT (F/O) PFD:
. the LOC index moves 1 point to the
right side.
. the G/S index moves down 1 point.
- On the F/O (CAPT) ND:
. the LOC deviation bar moves 1 point
to the right side.
. the G/S index moves down 1 point.
At the end of the test:
- On the CAPT (F/O) PFD:
. the LOC and G/S indexes go out of
view.
- On the F/O (CAPT) ND:
. the LOC deviation bar and the G/S
index go out of view.
- On the MCDU:
. the TEST OK indication comes into
view.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 505
Config-1 Nov 01/07
TAI
5. Close-up
________
Subtask 34-36-00-860-055
(1) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
(2) On the CAPT and F/O EFIS control sections of the FCU, release the ILS
pushbutton switches.
(5) On the ADIRS CDU, set the OFF/NAV/ATT selector switches to OFF.
(7) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 506
Config-1 Nov 01/07
TAI
TASK 34-36-00-710-001
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-36-00-860-050
(2) On the center pedestal, on the RMP1 (RMP2), set the ON/OFF switch to
ON.
Subtask 34-36-00-865-052
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/ILS/1 1RT1 G12
121VU COM NAV/ILS/2 1RT2 K09
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 507
Config-1 Nov 01/07
TAI
4. Procedure
_________
Subtask 34-36-00-710-055
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the NAV pushbutton switch. - the green LED on the NAV pushbutton
switch comes on.
- set the local frequency of an - the set frequency comes into view in
ILS 1 (ILS 2) beacon with the the right display (STBY/CRS).
dual selector knob .
(Ref. Fig. 501/TASK 34-36-00-
991-001)
- push the transfer (double - the set frequency comes into view in
arrow) pushbutton switch. the left display.
- release the ILS 1 (ILS 2) - in the loud speakers, you can hear
pushbutton switch. the Morse signal of the station.
5. Close-up
________
Subtask 34-36-00-860-051
(1) On the center pedestral, on the RMP1 (RMP2), set the ON/OFF switch to
OFF.
(2) On the center pedestral, on the ACP, push the ILS1 (ILS2) pushbutton
switch.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 508
Config-1 Nov 01/07
TAI
(3) De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
(4) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 509
Config-1 Nov 01/07
TAI
TASK 34-36-00-720-001
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-36-00-860-052
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 510
Config-1 Nov 01/07
TAI
(3) On the CAPT and F/O EFIS control sections of the FCU, push the ILS
pushbutton switches. Set the mode selector switches to ROSE/ILS.
(4) On the center pedestal, on the RMP1 (RMP2), set the ON/OFF switch to
ON.
Subtask 34-36-00-865-054
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/ILS/1 1RT1 G12
121VU COM NAV/ILS/2 1RT2 K09
Subtask 34-36-00-480-050
C. Install the VOR-ILS ground test unit near the radome. To do this, refer
to the installation instructions.
Set the ON/OFF switch to ON.
4. Procedure
_________
NOTE : The ILS1 shows indications on the CAPT PFD and the F/O ND. The ILS2
____
shows indications on the F/O PFD and the CAPT ND.
Subtask 34-36-00-720-050
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- close the circuit breaker 1RT1 On the CAPT (F/O) PFD and the F/O
(1RT2). (CAPT) ND:
- the G/S, LOC and ILS flags go out of
view.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 511
Config-1 Nov 01/07
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the NAV pushbutton switch. - the green LED on the NAV pushbutton
switch comes on.
- set the frequency related to - the set frequency comes into view in
the signal given by the ground the left display.
test unit
(Ref. Fig. 501/TASK 34-36-00-
991-001)
- set the LOC and G/S selector On the CAPT (F/O) PFD:
switches to 0. - the G/S and LOC indexes come into
view in the middle of the scale.
On the F/O (CAPT) ND:
- the G/S index and the LOC deviation
bar come into view in the middle of
the scale.
- set the G/S selector switch to On the CAPT (F/O) PFD and the F/O
up 1 point then up 2 points. (CAPT) ND:
- the G/S index moves up 1 point then
up 2 points.
- set the G/S selector switch to On the CAPT (F/O) PFD and the F/O
down 1 point then down 2 (CAPT) ND:
points. - the G/S index moves down 1 point then
down 2 points.
- set the G/S selector switch to On the CAPT (F/O) PFD and the F/O
0. (CAPT) ND:
- the G/S index moves to the middle of
the scale.
- set the LOC selector switch to On the CAPT (F/O) PFD and the F/O
left 1 point then left 2 (CAPT) ND:
points. - the LOC index and deviation bar move
1 point then 2 points to the left
side.
- set the LOC selector switch to On the CAPT (F/O) PFD and the F/O
right 1 point then right 2 (CAPT) ND:
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 512
Config-1 Nov 01/07
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
points. - the LOC index and deviation bar move
1 point then 2 points to the right
side.
- set the LOC selector switch to On the CAPT (F/O) PFD and the F/O
0. (CAPT) ND:
- the LOC index and deviation bar move
to the middle of the scale.
Subtask 34-36-00-720-051
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 513
Config-1 Nov 01/07
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- adjust slowly and continously
until the volume is correct.
5. Close-up
________
Subtask 34-36-00-080-050
Subtask 34-36-00-860-053
(1) On the CAPT and F/O EFIS control sections of the FCU, release the ILS
pushbutton switches.
(4) On the ADIRS CDU, set the OFF/NAV/ATT selector switches to OFF.
(6) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF :
001-050, 053-099, 201-203, 34-36-00
Page 514
Config-1 Nov 01/07
TAI
ILS ((MMR)) - ADJUSTMENT/TEST
_____________________________
TASK 34-36-00-740-003
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-36-00-861-053
Subtask 34-36-00-860-056
(1) Do the EIS start procedure (PFD DU, ND DU and upper ECAM DU only)
(Ref. TASK 31-60-00-860-001).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 501
Config-2 Nov 01/08
TAI
(3) On the center pedestal, on the RMP1 and RMP2:
- set the ON/OFF switch to ON
- push the NAV and the ILS pushbutton switches
(6) Do the procedure to get the SYSTEM REPORT/TEST NAV page (Ref. TASK
31-32-00-860-010).
If the SYSTEM REPORT/TEST/NAV page shows the ILS1 and ILS2
indications but not the MMR1 and MMR2 indications, you must do the
steps that follow:
- make sure that the engines are shut down
- open CFDIU SUPPLY circuit breaker 2TW
- open CFDIU BACK UP circuit breaker 8TW
- make sure that MMR1 and MMR2 circuit breakers, 42RT1 and 42RT2, are
closed
- after 30 seconds, close CFDIU circuit breakers 2TW and 8TW
- after 180 seconds, get access to the SYSTEM REPORT/TEST/NAV page
(the MMR indications are shown).
Subtask 34-36-00-865-058
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/FMGC/1 10CA1 B02
49VU NAV/MMR/1 42RT1 G12
49VU COM/RMP/1 2RG1 G10
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 502
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
**ON A/C 301-304,
4. Procedure
_________
Subtask 34-36-00-740-052
This test is for the MMR1. For the MMR2 use the indications between the
parentheses.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the MMR1 (MMR2) page comes into view.
the MMR1 (MMR2) indication.
- push the line key adjacent to - the MMR1 (MMR2) TEST 1/3 page with
the SYSTEM TEST indication. instructions comes into view.
- push the NEXT PAGE key. - the MMR1 (MMR2) TEST 2/3 page with
instructions comes into view.
- push the NEXT PAGE key. - the MMR1 (MMR2) TEST 3/3 page with
instructions comes into view.
- push the line key adjacent to - On the MCDU, the TEST IN PROGRESS 16S
the START TEST indication. indication comes into view.
- On the CAPT (F/O) PFD:
the LOC and G/S scales go out of
view,
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 503
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
the LOC and G/S red warnings come
into view for some seconds,
the MASTER CAUT lights come on and
the single chime sounds,
the LOC and G/S scales come into
view,
the G/S index comes into view, moves
up, moves down, then goes out of
view, and simultaneously, the LOC
index comes into view, moves to the
left then to the right, then goes out
of view,
the MASTER CAUT lights go off and the
single chime stops.
- push the line key adjacent to - the TEST OK indication comes into
the YES indication. view.
- push the line key adjacent to - the TEST CLOSE-UP indication comes
the RETURN indication. into view.
5. Close-up
________
Subtask 34-36-00-860-057
(2) On the RMP1 or on the RMP2, set the ON/OFF switch to OFF.
(3) On the EFIS control panel of the FCU, release the ILS pushbutton
switch.
(5) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 504
Config-2 Nov 01/08
TAI
(6) On the MCDU, fully decrease the brightness of the MCDU screen
(display off).
Subtask 34-36-00-862-053
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 505
Config-2 Nov 01/08
TAI
TASK 34-36-00-710-002
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-36-00-860-058
(3) On the center pedestal, on the SWITCHING panel 8VU, make sure that
the ATT HDG selector switch is at NORM.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 506
Config-2 Nov 01/08
TAI
Subtask 34-36-00-865-059
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/MMR/1 42RT1 G12
4. Procedure
_________
Subtask 34-36-00-710-056
NOTE : The actions and the results of this procedure occur on the MCDU
____
used.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 507
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
necessary to get the GPS data on
the MCDU.
3. On the overhead panel, on the On the MCDU, on the GPS MONITOR page:
ADIRS CDU: - make sure that the GPS position data
- set the DISPLAY DATA selector are approximately the same as the
switch to PPOS. ADIRS position data on the ADIRS CDU.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 508
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
you open the circuit breakers
42RT1 and 42RT2. It can be as
much as 60 minutes before the
indication comes into view.
It is not necessary to wait for
the GPS PRIMARY LOST indication
to come into view (this
indication is not important for
the test).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 509
Config-2 Nov 01/08
TAI
Subtask 34-36-00-710-059
NOTE : The actions and the results of this procedure occur on the MCDU
____
used.
NOTE : This test concerns system 1. For system 2, use the indications
____
between parentheses.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the RTE SELECTION page comes into
the FROM/TO indication view
- push the line key adjacent to - the INIT page comes into view
the RETURN indication
- push the line key adjacent to - the PREDICTIVE GPS page comes into
the PREDICTIVE GPS indication view
- enter GMT plus 1 hour below the - after some seconds, the Y or N
ETA indication (Estimated Time indication comes into view below the
of Arrival). -15, -10, -5, ETA, +5, +10, +15
indications.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 510
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
4. Close the circuit breaker 42RT2
(42RT1).
5. Close-up
________
Subtask 34-36-00-860-059
(2) On the ADIRS CDU, set the 3 OFF/NAV/ATT selector switches to OFF.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 511
Config-2 Nov 01/08
TAI
TASK 34-36-00-710-003
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-36-00-860-060
(2) On the center pedestal, on the RMP1 (RMP2), set the ON/OFF switch to
ON.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 512
Config-2 Nov 01/08
TAI
Subtask 34-36-00-865-060
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/MMR/1 42RT1 G12
4. Procedure
_________
Subtask 34-36-00-710-057
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the NAV pushbutton switch. - the green LED on the NAV pushbutton
switch comes on.
- set the local frequency of an - the set frequency comes into view in
ILS 1 (ILS 2) beacon with the the right display (STBY/CRS).
dual selector knob.
- push the transfer (double - the set frequency comes into view in
arrow) pushbutton switch. the left display.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 513
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- release the ILS 1 (ILS 2) - in the loud speakers, you can hear
pushbutton switch. the Morse signal of the station.
5. Close-up
________
Subtask 34-36-00-860-061
(1) On the center pedestral, on the RMP1 (RMP2), set the ON/OFF switch to
OFF.
(2) On the center pedestral, on the ACP, push the ILS1 (ILS2) pushbutton
switch.
(4) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 514
Config-2 Nov 01/08
TAI
TASK 34-36-00-720-002
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-36-00-869-063
A. General
Subtask 34-36-00-860-062
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 515
Config-2 Nov 01/08
TAI
(3) On the CAPT and F/O EFIS control sections of the FCU, push the ILS
pushbutton switches. Set the mode selector switches to ROSE/ILS.
(4) On the center pedestal, on the RMP1 (RMP2), set the ON/OFF switch to
ON.
Subtask 34-36-00-865-061
C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/MMR/1 42RT1 G12
Subtask 34-36-00-480-051
D. Install the VOR-ILS ground test unit near the radome. To do this, refer
to the installation instructions.
Set the ON/OFF switch to ON.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 516
Config-2 Nov 01/08
TAI
4. Procedure
_________
Subtask 34-36-00-720-052
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- close the circuit breaker 42RT1 On the CAPT (F/O) PFD and the F/O
(42RT2). (CAPT) ND:
- the G/S, LOC and ILS flags go out of
view.
- push the NAV pushbutton switch. - the green LED on the NAV pushbutton
switch comes on.
- set the frequency related to - the set frequency comes into view in
the signal given by the ground the left display.
test unit
- set the LOC and G/S selector On the CAPT (F/O) PFD:
switches to 0. - the G/S and LOC indexes come into
view in the middle of the scale.
On the F/O (CAPT) ND:
- the G/S index and the LOC deviation
bar come into view in the middle of
the scale.
- set the G/S selector switch to On the CAPT (F/O) PFD and the F/O
up 1 point then up 2 points. (CAPT) ND:
- the G/S index moves up 1 point then
up 2 points.
- set the G/S selector switch to On the CAPT (F/O) PFD and the F/O
down 1 point then down 2 (CAPT) ND:
points. - the G/S index moves down 1 point then
down 2 points.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 517
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the G/S selector switch to On the CAPT (F/O) PFD and the F/O
0. (CAPT) ND:
- the G/S index moves to the middle of
the scale.
- set the LOC selector switch to On the CAPT (F/O) PFD and the F/O
left 1 point then left 2 (CAPT) ND:
points. - the LOC index and deviation bar move
1 point then 2 points to the left
side.
- set the LOC selector switch to On the CAPT (F/O) PFD and the F/O
right 1 point then right 2 (CAPT) ND:
points. - the LOC index and deviation bar move
1 point then 2 points to the right
side.
- set the LOC selector switch to On the CAPT (F/O) PFD and the F/O
0. (CAPT) ND:
- the LOC index and deviation bar move
to the middle of the scale.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 518
Config-2 Nov 01/08
TAI
Subtask 34-36-00-720-053
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
5. Close-up
________
Subtask 34-36-00-080-051
Subtask 34-36-00-860-063
(1) On the CAPT and F/O EFIS control sections of the FCU, release the ILS
pushbutton switches.
(4) On the ADIRS CDU, set the OFF/NAV/ATT selector switches to OFF.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 519
Config-2 Nov 01/08
TAI
(6) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-00
Page 520
Config-2 Nov 01/08
TAI
ANTENNA - LOCALIZER (3RT) - REMOVAL/INSTALLATION
________________________________________________
TASK 34-36-11-000-001
CAUTION : MAKE SURE THAT YOU DO NOT DAMAGE THE FUSELAGE WHEN YOU REMOVE THE
_______
SCUFF PLATES.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-36-11
Page 401
May 01/00
R
TAI
3. __________
Job Set-up
Subtask 34-36-11-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
Subtask 34-36-11-010-050
B. Get Access
(1) In the cockpit, place a warning notice on the center pedestal to tell
persons not to operate the weather radar system.
(2) Put the access platform in position below the radome in zone 110.
4. Procedure
_________
Subtask 34-36-11-020-050
EFF :
ALL 34-36-11
Page 402
Nov 01/07
TAI
Localizer Antenna
Figure 401/TASK 34-36-11-991-001
EFF :
ALL 34-36-11
Page 403
Feb 01/96
TAI
(5) Remove the localizer antenna (1).
(6) Put blanking caps on the disconnected coaxial connectors (3) and (6).
EFF :
ALL 34-36-11
Page 404
Nov 01/04
R
TAI
TASK 34-36-11-400-001
R WARNING : DO NOT GET THE FLUID ON YOUR SKIN OR IN YOUR EYES. IF YOU DO:
_______
R - FLUSH IT AWAY WITH CLEAN WATER
R - GET MEDICAL AID.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-36-11
Page 405
May 01/05
TAI
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-36-11
Page 406
Nov 01/08
TAI
3. __________
Job Set-up
Subtask 34-36-11-860-050
(1) In the cockpit, make sure that the warning notice is in position on
the center pedestal to tell persons not to operate the weather radar
system.
(2) Make sure that the access platform is in position below the radome in
zone 110.
(3) Make sure that the radome 110AL is open (Ref. TASK 53-15-11-010-001).
Subtask 34-36-11-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
Subtask 34-36-11-160-050
(1) Precautions :
(2) Remove the used sealant from the bulkhead with CLEANING AGENTS
(Material No. 11-003) and a lint free cloth.
EFF :
ALL 34-36-11
Page 407
Nov 01/07
TAI
(3) Clean the component interface and/or the adjacent area.
4. Procedure
_________
WARNING : OBEY THE MANUFACTURERS INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
MATERIAL.
THIS MATERIAL IS DANGEROUS.
CAUTION : MAKE SURE THAT YOU DO NOT DAMAGE THE FUSELAGE WHEN YOU REMOVE THE
_______
SCUFF PLATES.
Subtask 34-36-11-420-050
(1) On the bulkhead (2), apply SPECIAL MATERIALS (Material No. 05-013)
with nonmetallic scraper to the attachment of the localizer antenna
and to the support of the localizer antenna (1).
(2) On the bulkhead (2), apply SEALANTS (Material No. 09-019) with a
nonmetallic scraper to the attachment of the localizer antenna and to
the support of the localizer antenna (1) (Ref. TASK 51-76-11-300-
001).
NOTE : Make sure that the screw holes do not show any signs of
____
sealing compound.
(3) Remove the blanking caps from the coaxial connectors (3) and (6).
(4) Make sure that the coaxial connectors (3) and (6) are in the correct
condition.
(5) Put the O-ring (4) in the correct position on the antenna (1).
(6) Connect the coaxial connectors (3) and (6) to the localizer antenna
(1).
(7) Attach the localizer antenna (1) with the screws (5).
(8) Remove the unwanted sealing compound from the support of the
localizer antenna (1) with a nonmetallic scraper.
EFF :
ALL 34-36-11
Page 408
Nov 01/04
R
TAI
(9) Make sure that the bonding contact resistance between the antenna (1)
and the fuselage structure (2) is not higher than 5 milliohms
(Ref. TASK 20-28-00-720-005) .
(10) Make a seal around the support of the localizer antenna with SEALANTS
(Material No. 09-016) (Ref. TASK 51-76-11-300-001).
Subtask 34-36-11-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
Subtask 34-36-11-720-050
C. Do the functional test of the two ILS (para. Identification test with
tool) (Ref. TASK 34-36-00-720-001).
Subtask 34-36-11-720-050-A
C. Do the functional test of the two MMRs (para. Identification test with
tool) (Ref. TASK 34-36-00-720-002).
EFF :
ALL 34-36-11
Page 409
Nov 01/08
TAI
**ON A/C ALL
5. Close-up
________
Subtask 34-36-11-410-050
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-36-11
Page 410
Nov 01/06
TAI
ANTENNA - GPS ACTIVE (43RT1,43RT2) - REMOVAL/INSTALLATION
_________________________________________________________
TASK 34-36-16-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 401
Nov 01/08
TAI
3. __________
Job Set-up
Subtask 34-36-16-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/MMR/1 42RT1 G12
Subtask 34-36-16-010-050
B. Get Access
(1) Put the access platform in position at zone 220 to get access to the
antenna 43RT1 (43RT2).
4. Procedure
_________
Subtask 34-36-16-020-050
(1) Remove the sealant from the screw heads and around the antenna base
with a nonmetallic scraper.
(2) Remove the four screws (2) and pull the antenna (1) away from the
structure (3).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 402
Nov 01/08
TAI
GPS Active Antenna
Figure 401/TASK 34-36-16-991-001
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 403
Nov 01/08
TAI
(3) Remove the lockwire and disconnect the coaxial connector (4).
(4) Remove the antenna (1) and put blanking caps on the disconnected
coaxial connectors.
NOTE : The coaxial connector (4) must not go into the fuselage.
____
Attach it to the fuselage with masking tape.
Subtask 34-36-16-020-050-A
(1) Remove the sealant from the screw heads and around the antenna base
with a nonmetallic scraper.
(2) Remove the four screws (2) and pull the antenna (1) away from the
structure (3).
(3) Remove the lockwire and disconnect the coaxial connector (4).
(4) Remove the antenna (1) and put blanking caps on the disconnected
coaxial connectors.
NOTE : The coaxial connector (4) must not go into the fuselage.
____
Attach it to the fuselage with masking tape.
R
EFF : 211-212, 215-215, 218-299, 301-304,
306-399, 401-499,
34-36-16
Page 404
Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
TASK 34-36-16-400-001
Installation of the GPS Active Antenna (43RT1, 43RT2) with Teflon Seal
WARNING : DO NOT GET THE FLUID ON YOUR SKIN OR IN YOUR EYES. IF YOU DO:
_______
- FLUSH IT AWAY WITH CLEAN WATER
- GET MEDICAL AID.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 405
Nov 01/08
TAI
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 406
Feb 01/09
TAI
3. __________
Job Set-up
Subtask 34-36-16-865-051
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/MMR/1 42RT1 G12
Subtask 34-36-16-010-051
(1) Make sure that the access platform is in position at zone 220 to get
access to the antenna.
4. Procedure
_________
WARNING : OBEY THE MANUFACTURERS INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
MATERIAL.
THIS MATERIAL IS DANGEROUS.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 407
Nov 01/08
TAI
Subtask 34-36-16-420-050
(1) Remove the used sealant from the fuselage structure (3) with a
nonmetallic scraper.
(2) Clean the mating surfaces with CLEANING AGENTS (Material No. 11-004)
and a lint-free cloth.
(4) Put a new O-ring (5) in the correct position on the antenna (1).
(5) Put the seal that you removed or a new teflon seal (6) on the antenna
base.
(6) Remove the blanking caps and connect the coaxial connector (4).
Install it with the lockwire, CRES dia. 0.8 mm (0.030 in.).
(7) Put the antenna (1) in the correct position on the fuselage.
NOTE : Use the small triangle and the F indication which are under
____
the antenna: the triangle must point to the front of the
aircraft.
(9) Make sure that the electrical bonding of the antenna is not higher
than 5 milliohms (Ref. TASK 20-28-00-720-005).
(10) Apply a bead of SEALANTS (Material No. 09-016) around the antenna
base and make it smooth (Ref. TASK 51-76-11-300-001)
(11) Apply SEALANTS (Material No. 09-016) to the screw heads and make the
antenna contour smooth.
(13) Apply STRUCTURE PAINTS (Material No. 16-003) to the sealant around
the base of the antenna (1).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 408
Nov 01/08
TAI
(14) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
001B) to the sealant on the head of the screws (2).
Subtask 34-36-16-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/MMR/1 42RT1 G12
Subtask 34-36-16-710-050
(1) Make sure that the IR system is aligned (Ref. TASK 34-10-00-860-004).
(2) On one MCDU, push the DATA key to get the DATA INDEX page and then
push the line key adjacent to the GPS MONITOR indication.
(3) On the GPS MONITOR page, after some minutes, make sure that:
- the GPS1(2) POSITION indication is correct.
- the TTRK indication shows dashes.
- the MERIT indication shows between 0 and 100 m.
- the GS indication shows approx. 000.
- the MODE indication shows NAV.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 409
Nov 01/08
TAI
(4) On the upper ECAM DU, make sure that there is no GPS fault message.
5. Close-up
________
Subtask 34-36-16-410-050
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 410
Nov 01/08
TAI
TASK 34-36-16-400-001- 01
Installation of the GPS Active Antenna (43RT1, 43RT2) without Teflon Seal
WARNING : DO NOT GET THE FLUID ON YOUR SKIN OR IN YOUR EYES. IF YOU DO:
_______
- FLUSH IT AWAY WITH CLEAN WATER
- GET MEDICAL AID.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 411
Nov 01/08
TAI
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 412
Feb 01/09
TAI
3. __________
Job Set-up
Subtask 34-36-16-865-053
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/MMR/1 42RT1 G12
Subtask 34-36-16-010-052
(1) Make sure that the access platform is in position at zone 220 to get
access to the antenna.
4. Procedure
_________
WARNING : OBEY THE MANUFACTURERS INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
MATERIAL.
THIS MATERIAL IS DANGEROUS.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 413
Nov 01/08
TAI
GPS Active Antenna
Figure 402/TASK 34-36-16-991-002
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 414
Nov 01/08
TAI
Subtask 34-36-16-420-051
(1) Remove the used sealant from the fuselage structure (3) with a
nonmetallic scraper.
(2) Clean the mating surfaces with CLEANING AGENTS (Material No. 11-003)
and a lint-free cloth.
(4) Apply masking tape to the structure (3), the edge of the antenna (1),
the screw holes and the hole for the antenna connector.
(5) Apply SPECIAL MATERIALS (Material No. 05-013) to the bottom of the
antenna (1).
(6) Apply SEALANTS (Material No. 09-019) to the area of the fuselage (3)
that makes an interface with the antenna (1) (Ref. TASK 51-76-11-300-
001).
(7) Remove the masking tape from the screw holes and the hole for the
antenna connector.
(9) Make sure that the electrical connectors are clean and in the correct
condition.
(11) Connect the coaxial connector (4) to the GPS antenna connector.
(12) Safety the coaxial connector (4) with lockwire, CRES dia. 0.8 mm
(0.030 in.).
(13) Put the antenna (1) in position and install the screws (2).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 415
Nov 01/08
TAI
(16) Remove the remaining masking tape.
(17) Make sure that the bonding contact resistance between the antenna (1)
and the fuselage structure (3) is not higher than 5 milliohms
(Ref. TASK 20-28-00-912-004).
(18) Make a sealing bead with SEALANTS (Material No. 09-016) around the
antenna (1) (Ref. TASK 51-76-11-300-001).
(19) Apply SEALANTS (Material No. 09-016) to the heads of the screws (2).
(20) Make the contour of the sealant on the screws (2) and around the
antenna (1) smooth.
(22) Apply STRUCTURE PAINTS (Material No. 16-003) to the sealant around
the base of the antenna (1).
(23) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
001B) to the sealant on the head of the screws (2).
Subtask 34-36-16-865-054
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU NAV/MMR/1 42RT1 G12
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 416
Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
Subtask 34-36-16-710-051
(1) Make sure that the IR system is aligned (Ref. TASK 34-10-00-860-004).
(2) On one MCDU, push the DATA key to get the DATA INDEX page and then
push the line key adjacent to the GPS MONITOR indication.
(3) On the GPS MONITOR page, after some minutes, make sure that:
- the GPS1(2) POSITION indication is correct.
- the TTRK indication shows dashes.
- the MERIT indication shows approx. 100 m.
- the GS indication shows approx. 000.
- the MODE indication shows NAV.
(4) On the upper ECAM DU, make sure that there is no GPS fault message.
5. Close-up
________
Subtask 34-36-16-410-051
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-16
Page 417
Nov 01/08
TAI
ANTENNA - GLIDE/SLOPE (4RT) - REMOVAL/INSTALLATION
__________________________________________________
TASK 34-36-18-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-36-18
Page 401
Nov 01/04
R
TAI
3. __________
Job Set-up
Subtask 34-36-18-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
Subtask 34-36-18-010-050
B. Get Access
(1) In the cockpit, put a warning notice on the center pedestal to tell
persons not to operate or to start the weather radar system.
(2) Put the access platform in position in zone 110 below the radome.
4. Procedure
_________
Subtask 34-36-18-020-050
(2) Disengage the antenna (1) away from the bulkhead (4).
EFF :
ALL 34-36-18
Page 402
Nov 01/07
TAI
Glide/Slope Antenna
Figure 401/TASK 34-36-18-991-001
EFF :
ALL 34-36-18
Page 403
Feb 01/96
TAI
(5) Remove the antenna (1).
(6) Put blanking caps on the disconnected coaxial connectors (3) and (5).
EFF :
ALL 34-36-18
Page 404
Nov 01/04
R
TAI
TASK 34-36-18-400-001
R WARNING : DO NOT GET THE FLUID ON YOUR SKIN OR IN YOUR EYES. IF YOU DO:
_______
R - FLUSH IT AWAY WITH CLEAN WATER
R - GET MEDICAL AID.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-36-18
Page 405
May 01/05
TAI
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-36-18-860-050
(1) In the cockpit, make sure that the warning notice is in position on
the center pedestal to tell persons not to operate or to start the
weather radar system.
EFF :
ALL 34-36-18
Page 406
Nov 01/08
TAI
(2) Make sure that the access platform is in position below the radome in
zone 110.
(3) Make sure that the radome 110AL is open (Ref. TASK 53-15-11-010-001).
Subtask 34-36-18-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
Subtask 34-36-18-160-050
(1) Precautions
(2) Remove the used sealant from the fuselage with CLEANING AGENTS
(Material No. 11-003) and a lint-free cloth.
EFF :
ALL 34-36-18
Page 407
Nov 01/08
R
TAI
4. Procedure
_________
WARNING : OBEY THE MANUFACTURERS INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
MATERIAL.
THIS MATERIAL IS DANGEROUS.
Subtask 34-36-18-420-050
(1) Apply SPECIAL MATERIALS (Material No. 05-013) to the bulkhead (4)
where you install the antenna and to the antenna (1) mount.
(2) Apply SEALANTS (Material No. 09-019) to the bulkhead (4) where you
install the antenna and to the antenna (1) mount (Ref. TASK 51-76-11-
300-001).
(3) Remove the blanking caps from the coaxial connectors (3) and (5).
(4) Put the O-rings (2) in the correct position on the antenna (1).
(9) Apply a sealing bead with SEALANTS (Material No. 09-016) around the
antenna (1).
EFF :
ALL 34-36-18
Page 408
Nov 01/08
R
TAI
Subtask 34-36-18-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
Subtask 34-36-18-720-050
C. Do the functional test of the two ILS (para. Reception test with tool)
(Ref. TASK 34-36-00-720-001).
Subtask 34-36-18-720-050-A
C. Do the functional test of the two MMRs (para. Reception test with tool)
(Ref. TASK 34-36-00-720-002).
EFF :
ALL 34-36-18
Page 409
Nov 01/08
TAI
**ON A/C ALL
5. Close-up
________
Subtask 34-36-18-410-050
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-36-18
Page 410
Nov 01/06
TAI
RECEIVER - MULTI MODE (MMR) (40RT1,40RT2) - REMOVAL/INSTALLATION
________________________________________________________________
TASK 34-36-31-000-002
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-36-31-810-050
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-31
Page 401
Config-2 Nov 01/08
TAI
Subtask 34-36-31-865-053
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 40RT1
49VU NAV/MMR/1 42RT1 G12
FOR 40RT2
Subtask 34-36-31-010-052
C. Get Access
(1) Put the access platform in position at the access door 811 in zone
122.
4. Procedure
_________
Subtask 34-36-31-020-051
(3) Pull the Multi Mode Receiver (1) from its rack (3) to disconnect the
electrical connectors (2).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-31
Page 402
Config-2 Nov 01/08
TAI
Multi Mode Receiver
Figure 401/TASK 34-36-31-991-002
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-31
Page 403
Config-2 Nov 01/08
TAI
(4) Remove the Multi Mode Receiver (1) from its rack.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-31
Page 404
Config-2 Nov 01/08
TAI
TASK 34-36-31-400-002
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-36-31-010-053
A. Get Access
(1) Make sure that the access platform is in position at the access door
811 in zone 122.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-31
Page 405
Config-2 Nov 01/08
TAI
Subtask 34-36-31-865-054
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 40RT1
49VU NAV/MMR/1 42RT1 G12
FOR 40RT2
4. Procedure
_________
Subtask 34-36-31-420-051
(3) Remove the blanking caps from the electrical connectors (2).
(4) Make sure that the electrical connectors (2) are clean and in the
correct condition.
(5) Install the Multi Mode Receiver (1) on its rack (3).
(6) Push the Multi Mode Receiver (1) on its rack (3) to connect the
electrical connectors (2).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-31
Page 406
Config-2 Nov 01/08
TAI
(7) Engage the nuts (4) on the lugs (5) and tighten.
Subtask 34-36-31-865-055
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 40RT1
49VU NAV/MMR/1 42RT1 G12
FOR 40RT2
Subtask 34-36-31-740-051
(1) Do the BITE test of the Multi Mode Receiver (Ref. TASK 34-36-00-740-
003)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-31
Page 407
Config-2 Nov 01/08
TAI
5. Close-up
________
Subtask 34-36-31-410-051
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-36-31
Page 408
Config-2 Nov 01/08
TAI
WEATHER RADAR SYSTEM - DESCRIPTION AND OPERATION
________________________________________________
1. _______
General
The aircraft is equipped with an X-band weather radar system. This system
complies with ARINC Characteristics 708. The weather radar enables detection
and localization of the atmospheric disturbances in the area defined by the
antenna scanning: plus or minus 90 deg. of aircraft centerline and up to 320
NM in front of the aircraft.
In addition the weather radar system enables:
- detection of turbulence areas caused by the presence of precipitations
- presentation of terrain mapping information by the combination of the
orientation of the radar beam and of the receiver gain.
Five color displays are used to show precipitations and turbulences to the
crew.
This system is associated to:
- the Air Data/ Inertial Reference Units (ADIRU) for the attitude
information
- the Electronic Instrument System (EIS) for the generation of the distance
scales and the display of the radar images.
2. Component
__________________
Location
(Ref. Fig. 001)
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
1SQ1 XCVR - WEATHER RADAR, 1 109VU 121 811
3SQ CTL UNIT - WEATHER RADAR 11VU 210
7SQ DRIVE - WR ANTENNA 110 110AL
9SQ MTG TRAY - WR XCVR 109VU 121 811
11SQ ANTENNA - WEATHER RADAR 110 110AL
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 1
Config-1 Nov 01/07
TAI
Weather Radar - Component Location
Figure 001
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 2
Config-1 Nov 01/07
TAI
Weather Radar - Control and Indicating
Figure 002
R
EFF :
001-050, 053-099, 34-41-00
Page 3
Config-1 Nov 01/00
TAI
Weather Radar - Control and Indicating
Figure 002A
R
EFF :
201-203, 34-41-00
Page 4
Config-1 Nov 01/07
TAI
The wave guide assembly 301FM ensures the RF connection between:
- the dual mounting tray installed in the avionics compartment and
- the WR antenna drive installed at frame 1.
NOTE : For the layout of the components related to the weather radar system
____
(FCU/EFIS control section and DMC), refer to 31-60.
3. System
__________________
Description
(Ref. Fig. 003)
A. General
The weather radar system, which complies with ARINC Characteristics 708,
consists of:
- a transceiver 1SQ1
- a single control unit 3SQ
- a single antenna drive 7SQ
- an antenna 11SQ
- a dual transceiver mounting tray with a wave guide switch.
A. General
The weather radar system, which complies with ARINC Characteristics 708,
consists of:
- a transceiver 1SQ1
- a dual control unit 3SQ
- a dual antenna drive 7SQ
- an antenna 11SQ
- a dual transceiver mounting tray with a wave guide switch.
NOTE : The weather radar image is shown on the Captain and First Officer
____
Navigation Displays (ND). The NDs are connected to the three
Display Management Computers (DMC) and to the Captain and First
Officer EFIS control sections of the FCU.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 5
Config-1 Nov 01/07
TAI
NOTE : The ADIRUs give the attitude to the weather radar system (Refer to
____
34-14-00). These data ensure the radar antenna stabilization.
The actual operating range of the system is 320 NM. The peak power
emitted is approximately 100 W.
The antenna scans a 180 deg. sector in azimuth and has a tilt (pitch)
coverage of plus or minus 15 deg. Stabilization limits are: plus or minus
40 deg. in the pitch and roll axes.
The antenna scans the 180 deg. sector in azimuth 15 times per minute.
The antenna which has a 28-inch diameter, radiates an RF beam. The beam
width is 3.5 deg.
Additionally, the weather radar may be used as a navigation aid. In the
mapping mode, it allows identification of major changes in the ground
map: (e.g. a sea coast, an estuary, a lake, a mountain, an island, a big
city, etc.).
Correspondence table
-------------------------------------------------------------------------------
| LEVEL DETECTED | PRECIPITATION RATE | COLOR OF ECHOES |
|------------------------|-------------------------|--------------------------|
| Z1 to Z2 10-20 dB | less than 0.76 mm/h | black |
| Z2 to Z3 20-30 dB | from 0.76 to 3.81 mm/h | green |
| Z3 to Z4 30-40 dB | from 3.81 to 12.7 mm/h | yellow |
| Z4 to Z5 40-50 dB | from 12.7 to 50.8 mm/h | red |
| | | |
|------------------------|-------------------------|--------------------------|
| Turbulence | 50.8 mm/h and above | magenta |
-------------------------------------------------------------------------------
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 6
Config-1 Nov 01/07
TAI
Weather Radar - Block Diagram
Figure 003
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 7/8
Config-1 Nov 01/07
TAI
4. Power
____________
Supply
Energization of the transceiver 1 is through 115VAC, 400 Hz normal bus:
- 115VAC BUS 1 1XP via sub-busbar 101XP-C and circuit breaker 5SQ1.
NOTE : Energization of the weather radar control unit and of the WR antenna
____
drive is through the selected transceiver.
Consumption of each selected transceiver is 150 W maximum.
5. Component
_____________________
Description
(Ref. Fig. 004)
(2) A multiplier
The two 777.77 MHz drive signals are split and frequency-multiplied
by three to produce four 2333.31 MHz signals. These signals are again
multiplied by four to obtain four 9333.24 MHz signals which are then
combined by power combiners to obtain the final transmitter output
signal.
(3) A duplexer/monitor
The transmitter output is coupled through a duplexer/monitor to the
wave guide antenna feed through a 4-port circulator. Incorporated in
the duplexer operation are monitor circuits to monitor the output
power level and to develop a frequency loop error signal for the
correction of frequency chirp. The monitor circuit also accepts a
test signal which causes a portion of the reference signal to be
injected to the receiver for test and calibration. The 4-port
circulator also couples the RF return from the wave guide antenna
feed through a limiter to the receiver portion of the transceiver.
The wave guide limiter protects the mixer diodes from all high power
pulses while passing all low power inputs to the mixer.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 9
Config-1 Nov 01/07
TAI
Weather Radar Architecture
Figure 004
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 10
Config-1 Nov 01/07
TAI
Weather Radar Transceiver - Component Description
Figure 005
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 11
Config-1 Nov 01/07
TAI
(4) A mixer
The mixer circuit processes the detected RF return signal by mixing
it with the first local oscillator signal and amplifying the
resultant intermediate frequency signal. The first amplifier provides
25 dB amplification before the first intermediate frequency signal is
applied to the second IF amplifier.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 12
Config-1 Nov 01/07
TAI
(8) An input/output unit
All interface junctions from the microprocessor of the control
processing unit and the remainder of the transceiver and other units
within the system are provided by the input/output circuitry. Control
word buses, digital and analog attitude buses and discrete buses are
all connected to the multiplexer and shift register circuits of the
input/output unit.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 13
Config-1 Nov 01/07
TAI
Weather Radar - Antenna
Figure 006
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 14
Config-1 Nov 01/07
TAI
NOTE : Energization of the control unit is through the weather radar
____
transceiver.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 15
Config-1 Nov 01/07
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 1.270.01 |CONTROL | | | | 19 |100 |DIS | | |
| |WORD 1 | | | | | | | | |
| 2.270.10 | | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 1.271.01 |CONTROL | | | | 7 |100 |DIS | | |
| |WORD 2 | | | | | | | | |
| 2.271.10 | | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 1.055.01 |WXR DATA | | | |1549|7.82|DIS | | |
| 2.055.10 | | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 1.356.01 |Mainte- | | | | |100 |ISO5| | |
| |nance | | | | | | | | |
| |message | | | | | | | | |
| |word | | | | | | | | |
| 2.356.10 | | | | | | | | | |
-------------------------------------------------------------------------------
(a) The signal transmitted on the control bus line connecting the
radar control unit to the transceiver complies with the format of
control word 1 as defined by ARINC specification 708 (appendix
15.1) and compatible with ARINC specification 429.
-------------------------------------------------------------------------------
|CONTROL | P |MATRIX |GAIN |TILT |MODE |STAB |IDNT |SCAN |SDI |CONTROL WORD 1 |
| WORD 1 | | | | | | | | | | LABEL (270-A8)|
|--------|---|-------|-----|-----|-----|-----|-----|-----|----|---------------|
|BIT No. | 3 | 3 3 | 2-2 | 2-1 |1 1 1| 1 | 1 | 1 | 1 | |
| | 2 | 1 0 | 9-4 | 3-7 |6 5 4| 3 | 2 | 1 | 0 9| 8----------1 |
-------------------------------------------------------------------------------
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 16
Config-1 Nov 01/07
TAI
(b) Among the signals transmitted on the bus line from the EFIS
control section of the FCU, the radar transceiver uses the range
data contained in control word 2 as defined in ARINC
specification 708 (Appendix 15.1) and compatible with ARINC
specification 429.
-------------------------------------------------------------------------------
| CONTROL | P | MATRIX | RANGE | PROVI-| ANTI- | PROVI-| RESER-| CONTROL WORD |
| WORD 2 | | | | SIONS |CLUTTER| SION | VED | 2 LABEL |
| | | | | | | | SDI | (271.A8) |
|---------|---|--------|-------|-------|-------|-------|-------|--------------|
| BIT | 3 | 3 3 | 2---2 | 2 1 | 1 | 1 | 1 | |
| No. | 2 | 1 0 | 9---4 | 3 3 | 2 | 1 | 0 9 | 8 -------- 1 |
-------------------------------------------------------------------------------
31 30
- 0 / 0 when the radar image is selected on the EFIS
control section of the FCU
- 1 / 1 when the radar image is not selected on the EFIS
control section of the FCU.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 17
Config-1 Nov 01/07
TAI
-------------------------------------------------------------------------------
| DATA | SYNCHRO | RANGE | | RANGE | SPARE | SCAN | DATA |
| WORD | WORD END | BIN 511 | | BIN 0 | | ANGLE | ACCEPT |
|---------|----------|----------|-----|---------|---------|---------|---------|
| | | 111 | | | | | |
| Bit | | 655 | | | | | |
| No. | | 099 | --- | 666 | 6 | 6-----5 | 55 |
| | | 098 | | 765 | 4 | 3-----2 | 10 |
-------------------------------------------------------------------------------
|--------------------DATA--------------------- |
-------------------------------------------------------------------------------
| SPARE| RANGE| GAIN| TILT| MODE| STAB| FAULTS|A B C D E| F| G| H| DATA| SYN- |
| | | | | | | | | | | | WORD| CHRO |
| | | | | | | | | | | |LABEL| WORD |
| | | | | | | | | | | |(055)| STAR |
| | | | | | | | | | | | | TING |
|------|------|-----|-----|-----|-----|-------|---------|--|--|--|-----|------|
| 4 | 4--4 | 4--3| 3--3| 2--2| 2 | 2--21 |1 1 1 1 1|11|1 |1 | | |
| 9 | 8 3 | 2--7| 6--0| 9--7| 6 | 5--09 |8 7 6 5 4|32|1 |09| 8--1| |
-------------------------------------------------------------------------------
|--------------------------CONTROL-------------------------------|
A = Stab Sat
B = Sector
C = Idnt
D = Precip. Alert
E = Turb. Alert
F = Spare
G = Slave
H = Control Accept
NOTE : Data word message includes mainly rho and o data, which gives
____
the position of the various echoes detected in range and
azimuth.
RANGE BIN : definition of one point of radar echo in
conjunction with color matrix.
DATA ACCEPT : data distribution matrix on indicators
STAB SAT : stabilization limit.
SECTOR : scan angle reduced to plus or minus 45 deg. (Not
used).
IDNT : clutter suppression
PRECIP ALERT : bad weather warning (Not used).
TURB ALERT : turbulence warning
CONTROL ACCEPT : control data distribution matrix.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 18
Config-1 Nov 01/07
TAI
6. Operation
_________
A. Basic Principles
The weather radar system uses the principle of radio echoing. The weather
radar transceiver generates microwave energy in the form of
electromagnetic pulses. The energy is conveyed in space by a very high
frequency wave (X band). When this wave intercepts an appropriate target,
part of the energy is reflected back to the weather radar antenna then to
the transceiver. The electronics circuits of the transceiver measure the
elapsed time between the transmission of the wave and the reception of
the echo to determine the target distance (it takes 12.36 microseconds
for the electromagnetic wave to travel out and back for each nautical
mile of target range).
The angular position of the target is detected by the angular position of
the antenna in its scanning in azimuth. As the quantity of energy
reflected to the antenna is proportional to the target density, the
different levels of atmospheric disturbances are shown on the displays by
different colors.
The detection of the turbulence areas is based on the Doppler effect
applied to the movement of precipitation drops detected in clouds. Only
movements parallel to the aircraft centerline are detected.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 19
Config-1 Nov 01/07
TAI
Weather Radar Control Unit
Figure 007
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 20
Config-1 Nov 01/07
TAI
(d) A GND CLTR SPRS switch, item 5, for the selection of ground
clutter suppression.
(b) A scale selector switch, item 2, common to EFIS, FMGS and radar
systems, which enables the selection of 10, 20, 40, 80, 160 or
320 operation range in nautical miles (NM) for display of the
weather radar image on the CAPT and F/O NDs.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 21
Config-1 Nov 01/07
TAI
EFIS Control Sections - Lighting/Loud Speaker Control Panels
Figure 008
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 22
Config-1 Nov 01/07
TAI
(3) Lighting/loud speaker control panels
(Ref. Fig. 008)
CAPT and F/O lighting/loud speaker control panels 301VU and 500VU
which are connected to CAPT and F/O NDs, include ND concentric
potentiometers for adjusting the brightness of the image displayed on
the NDs. The outer knob of each potentiometer controls the brightness
of the radar image only, item 3.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 23
Config-1 Nov 01/07
TAI
(2) Weather radar control unit utilization
(Ref. Fig. 007)
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 24
Config-1 Nov 01/07
TAI
R **ON A/C 001-050, 053-099, 201-203,
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 25
Config-1 Nov 01/07
TAI
(3) Utilization of EFIS control sections and lighting/loud speaker
control panels
(Ref. Fig. 008)
The various faults which may affect the radar image are listed in
descending order of importance.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 26
Config-1 Nov 01/07
TAI
Weather Radar - Data Displayed on the NDs
Figure 009
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 27
Config-1 Nov 01/07
TAI
If several faults occur, only the most important one is displayed
(parts c and d).
Two types of faults are likely to affect the radar system:
7. Test
____
A. Maintenance Test
(Ref. Fig. 010)
The TEST mode becomes active when it is selected through the CFDS via
MCDU 1 or 2.
It enables an operational check of the main circuits which constitute the
system.
The transmission/reception channel is tested for less than one second,
then a special test pattern is displayed on the NDs as long as TEST mode
is active.
Moreover the elevation and azimuth control circuits of the antenna drive
are excited during the test period. The complete test period lasts 15
seconds approximately.
When the TEST mode is activated:
(Ref. Fig. 011)
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 28
Config-1 Nov 01/07
TAI
Weather Radar - Test Pattern on the ND
Figure 010
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 29
Config-1 Nov 01/07
TAI
Weather Radar - Antenna Test Sequence
Figure 011
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 30
Config-1 Nov 01/07
TAI
The antenna carries out an elevation scanning sequence from up to down
positions (+ 15 deg., - 15 deg.) then an azimuth scanning sequence from
right to left, then stabilizes at 0⁰, perpendicular to the aircraft
centerline.
It should be noted that:
- the special test pattern, with TEST indication displayed in the R lower
corner of the NDs, can only be displayed if no fault is detected
- the antenna no longer responds to the stabilization signals from the
ADIRU when the TEST mode is active. At the first ground supply, the
antenna test sequence is performed independently of the TEST mode
selection and SYS switch. The test image is not displayed on the ND.
This antenna test sequence is the same as the Bite test sequence.
(1) Transceiver
(Ref. Fig. 005)
The weather radar transceiver is installed on its dual mounting tray
in the forward avionics compartment. On the transceiver face are:
- a series of seven Light-Emitting Diodes (LEDs) which provides
monitoring of the seven fault indicators
- a TEST pushbutton switch. When the TEST pushbutton switch is held
pressed, the seven LEDs come on then go off, except the LED
associated with the detected fault.
-------------------------------------------------------------------------------
| LED | FUNCTION |
|---------------------------|-------------------------------------------------|
| R/T | Transceiver fault |
| ANT | Antenna drive fault |
| IND | Indicator fault (no range) |
| CON | Control unit fault |
| WG-SW | Wave guide switch fault |
| GYRO | Attitude source fault |
| AIR | Excessive temperature |
-------------------------------------------------------------------------------
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 31
Config-1 Nov 01/07
TAI
C. BITE Function
(1) General
The purpose of the Built-In-Test Equipment (BITE) is to ease the line
maintenance of the aircraft and thus to detect anomalies and faults
of the various items of equipment associated to each system.
The BITE of the weather radar transceiver installed on the aircraft
is an extension of the BITE already incorporated in the basic
transceiver and of which one part of the detected faults is already
shown on the transceiver face.
For this purpose, a maintenance processor has been added to fulfil
the functions of interface and control with the CFDS.
The weather radar system is completely monitored and the various
detected faults are reported and stored in two zones associated with
the flight and ground phases.
The BITE of the weather radar transceiver dialogues with the CFDS to
present the detected faults and to activate the test sequences of the
transceiver, in normal mode and in menu mode respectively.
In normal mode, the fault memory is organized to store 64 flight
legs.
A maximum of 7 LRU faults and 24 different fault codes can be
detected at each flight leg.
A fault code is stored only once per flight leg. If an intermittent
fault occurs, only 4 events max. are stored.
In menu mode on the ground, only the faults of 3 LRUs and 72 fault
codes can be detected and stored.
NOTE : The fault codes are available at the laboratory. The manual
____
test of the system can be activated only on the ground and in
menu mode.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 32
Config-1 Nov 01/07
TAI
- the NO FAULT data is transmitted on the label 356 every 100 ms
approx. if no fault is detected.
- the faults detected during the flight phase are transmitted on
the label 356 every 250 ms approx. ; each fault word contains
the ATA reference plus the text of the fault.
----------------------------------------------------------
| LRU | ATA |
|-------------------------------------|------------------|
| TRANSCEIVER | 34-41-33 |
| CONTROL UNIT | 34-41-12 |
| ANTENNA | 34-41-11 |
| NO DATA FROM ADIRU | 34-14-00 |
| NO DATA FROM EFIS 1 PANEL | 22-81-12 |
| NO DATA FROM EFIS 2 PANEL | 22-81-12 |
| NO DATA FROM CFDIU | 31-32-34 |
----------------------------------------------------------
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 33
Config-1 Nov 01/07
TAI
Maintenance Test Procedure
Figure 012
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 34
Config-1 Nov 01/07
TAI
Weather Radar - Maintenance Test Procedure
Figure 013
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 35/36
Config-1 Nov 01/07
TAI
This menu page is transmitted with the ATA chapter reference,
text, date, GMT and the flight leg count relative to the faults
detected before the last flight.
- LRU IDENTIFICATION (Menu No. 6)
Only the P/N of the weather radar transceiver is transmitted.
- TEST (Menus No. 7, 8 and 9)
Selection of the TEST page and activation of this mode cause
the system self-test, the transmission and the presentation of
the TEST result on the MDCU.
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 37
Config-1 Nov 01/07
TAI
WR ANT in red in case WR antenna fault
WR CTL ind red in case of control unit fault
WR RNG in red in case of range fault
In case of multiple faults only the fault with the highest priority
is displayed
ILS 1 (2) and LOC and GLIDE scales in red.
NOTE : The radar display is not available when the PLAN mode is
____
selected on the EFIS control section of the FCU.
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 38
Config-1 Nov 01/07
R
TAI
WEATHER RADAR SYSTEM - DESCRIPTION AND OPERATION
________________________________________________
The aircraft is equipped with an X-band weather radar system with Predictive
Windshear capability. This system complies with the ARINC Characteristics 708A.
The weather radar system enables:
- detection and localization of the atmospheric disturbances in the area
defined by the antenna scanning: plus or minus 90 deg. of aircraft centerline
and up to 320NM in front of the aircraft,
- detection of turbulence areas caused by the presence of precipitations up to
a distance of 40NM,
- presentation of terrain mapping information by the combination of the
orientation of the radar beam and of the receiver gain,
- detection, if the Predictive Windshear System is operative, of a microburst
windshear event in the area defined by the antenna scanning: plus or minus 60
deg.
- presentation, if the Predictive Windshear System is operative, of windshear
events within an area plus or minus 30 deg. of aircraft centerline and up to
5NM in front of the aircraft.
NOTE : A microburst is a cool shaft of air, like a cylinder, between 1000 and
____
3000 ft. When it encounters the ground (airflow velocity from 40 to 110
kts) the downward moving airflow is translated to a horizontal flow
(from 80 to 220 kts), at the base of the air shaft. Two types of
microburst exist, wet and dry.
Five color displays are used to show precipitations, turbulence and ground
mapping to the crew.
The location of the windshear events, if the Predictive Windshear System is
operative, is indicated by an icon (symbol consisting of alternating red and
black arcs).
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 1
Config-3 Feb 01/09
TAI
**ON A/C 228-299, 309-399, 401-499,
The aircraft is equipped with an X-band dual Collins WXR-2100 Multiscan Radar
transceiver P/N 822-1710-202 with Predictive Windshear System (PWS). This
system is compatible with Electronic Instrument System 1 and 2 (EIS1 and EIS2)
and complies with ARINC Characteristics 708A.
Multiscan is a radar function that displays all significant weather at all
ranges, at all aircraft altitudes, and at all times on a display that is
essentially clutter-free, without the need for pilots to input tilt or gain
settings. Multiscan reduces pilot workload while enhancing weather detection
capability.
The Multiscan function optimizes weather detection and minimizes ground
clutter. This function determines the optimum tilt angle for the radar through
monitoring of:
- the aircraft altitude above the terrain (RA and ADR information).
- the aircraft position (IR information).
- the terrain conditions in the area (information located in an interval
Reference table).
Two antenna scans are performed, each scan is optimized for a particular
region in front of the aircraft. The upper beam detects medium-range weather
and the lower beam detects short and long-range weather by automatically
adjusting tilt and gain. The information is then stored in a temporary
database. When the captain or the first officer selects a range, the weather
radar transceiver retrieves the appropriate portions of the desired
information, merges the data and then eliminates ground clutter. The result
is an optimized weather display and the flight crew selects the range scale
required.
NOTE : A microburst is a cool shaft of air, like a cylinder, between 1000 and
____
3000 ft. When it encounters the ground (airflow velocity from 40 to 110
kts) the downward moving airflow is translated to a horizontal flow
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 2
Config-3 Feb 01/09
R
TAI
(from 80 to 220 kts), at the base of the air shaft. Two types of
microburst exist, wet and dry.
Five color displays are used to show precipitations, turbulence and ground
mapping to the crew.
The location of the windshear events is indicated by an icon (symbol consisting
of alternating red and black arcs).
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 3
Config-3 Feb 01/09
R
TAI
**ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
R 1. Component
__________________
Location
(Ref. Fig. 001)
The units of the weather radar system are located in the aircraft as
follows:
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
1SQ1 XCVR-WEATHER RADAR, 1 109VU 121 811 34-41-33
3SQ CTL UNIT-WEATHER RADAR 11VU 210 831 34-41-12
7SQ DRIVE-WR ANTENNA 110 110AL 34-41-11
9SQ MTG TRAY-WR XCVR 109VU 121 811 34-41-37
11SQ ANTENNA-WEATHER RADAR 110 110AL 34-41-11
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 4
Config-3 Feb 01/09
TAI
Weather Radar - Component Location
Figure 001
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 5
Config-3 Nov 01/08
TAI
Weather Radar - Control and Indicating
Figure 002
R
EFF :
401-402,
211-212, 215-215, 218-228, 301-309, 34-41-00
Page 6
Config-3 Nov 01/08
TAI
Weather Radar - Control and Indicating
Figure 002A
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 7
Config-3 Aug 01/07
TAI
R 2. __________________
System Description
NOTE : The weather radar image is shown on the CAPT and F/O Navigation
____
Displays (ND).
The NDs are connected to the three Display Management Computers (DMC)
and to the CAPT and F/O EFIS control panels of the FCU.
NOTE : The three ADIRUs give data information to the weather radar system.
____
These data ensure the radar antenna stabilization and the
computations of the windshear function.
A. General
The weather radar system, which complies with ARINC Characteristics 708A,
consists of:
- a transceiver 1SQ1,
- a control unit 3SQ,
- an antenna drive 7SQ,
- an antenna plate 11SQ,
- a transceiver single mounting tray 9SQ with a wave guide.
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 8
Config-3 Feb 01/09
TAI
Weather Radar Block Diagram - Data Acquisition
Figure 003
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 9
Config-3 Nov 01/08
TAI
Weather Radar Block Diagram - Data Acquisition
Figure 003A
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 10
Config-3 Aug 01/07
TAI
Weather Radar Block Diagram - Control and Display
Figure 004
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 11
Config-3 Nov 01/08
TAI
- the receiver signal is formatted into 1600-bit ARINC 453 words and
sent to the Display Management Computers (DMCs),
- acquisition of data from Radio Altimeters (RA1 and RA2) and other
specific interfaces,
- windshear event detection and generation of the appropriate signal,
- BITE function of the system.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 12
Config-3 Nov 01/08
TAI
(4) Weather Radar Antenna
The antenna is used for transmitting and receiving radar radio
frequency signals.
NOTE : The weather radar and windshear detection image (if the
____
predictive windshear function is activated) is shown on the
Captain and First Officer Navigation Displays (ND) and the
windshear warning is shown on Captain and First Officer
Primary Flight Displays (PFD) and on the upper ECAM DU. The
NDs and PFDs are connected to the three Display Management
Computers (DMC) and to the Captain and First Officer EFIS
control sections of the FCU.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 13
Config-3 Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-227, 301-308,
B. Peripherals
NOTE : The main air data and heading altitude data are provided
____
by the Air Data/Inertial Reference System (ADIRS).
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 14
Config-3 Nov 01/08
TAI
(e) EFIS Control Section
Two ARINC 429 buses provide the CAPT and F/O range selection
(label 271).
The receiver/transmitter receives one bus from the CAPT EFIS
control section and another one from the F/O EFIS control
section.
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 15
Config-3 Nov 01/08
TAI
(c) Windshear function enable signal (if predictive windshear
function is activated)
This discrete input provided by the weather radar control unit
through the windshear AUTO/OFF switch activates the windshear
function. This discrete signal is also transmitted to the DMCs
which use it for the logic of windshear messages displayed.
B. Peripherals
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 16
Config-3 Nov 01/08
TAI
- Body longitudinal acceleration (label 331) used for qualifiers
D1, D2.
NOTE : The main air data and heading altitude data are provided
____
by the Air Data/Inertial Reference System (ADIRS).
(f) One ARINc 429 high-speed bus (Hazard) provides radar data to be
recorded on the Flight Data Interface and Management Unit
(FDIMU).
(g) One ARINC 429 high-speed bus (Hazard) provides radar data to the
Enhanced Ground Proximity Warning System (EGPWS).
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 17
Config-3 Nov 01/08
R
TAI
Qualifier C1: ground speed (label 312 provided by IR bus from
IR1) (valid when GS > 30Kts).(Ref. asterisk below)
Qualifier C2: ground speed (label 312 provided by IR bus from
IR3) (valid when GS > 30Kts).
- Qualifiers D: two qualifiers D inputs are used.
Qualifier D1: body longitudinal acceleration (label 331
provided by IR bus from IR1) (valid when Nx > 0.07g for at
least 0.5 seconds).(Ref. asterisk below)
Qualifier D2: body longitudinal acceleration (label 331
provided by IR bus from IR3) (valid when Nx > 0.07g for at
least 0.5 seconds).
(*) For the second transceiver, C1 and D1 information is
provided by IR2.
To automatically activate the windshear function, one of the
qualifiers B and one of the qualifiers C or D have to be valid.
(3) Outputs
The transceiver provides the following outputs:
(a) Displays
The WR/PWS is connected to the DMCs by an ARINC 453 bus to
transmit the weather radar data and windshear data (if predictive
windshear function is activated) on the data word of label 055.
All the weather and windshear data received by the DMCs are
processed to display weather radar image and windshear events by
the Electronic Instrument System (EIS).
1
_ The Navigation Display (ND) it provides the following
indications:
- weather radar image
- windshear events location for advisory, caution or warning
alert
- windshear failures.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 18
Config-3 Nov 01/08
TAI
2
_ The Primary Flight Display (PFD) it provides all visual alerts
for caution or warning alert.
NOTE : The Flight Warning Computers (FWC) and the FDIU receive
____
WR/PWS data through the DMCs. These data are used by
the FWCs to display windshear function failure and
windshear function de-activation.
The FDIU records the windshear alert and failure.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 19
Config-3 Nov 01/08
TAI
(4) Audio Inhibit Discrete Signals (if predictive windshear function is
activated)
These discretes are used to indicate whether the aural alert output
has to be active or not:
- predictive windshear aural alerts (audio inhibit discrete input)
are inhibited by the Reactive Windshear System and stall warning.
- predictive windshear audio inhibit discrete output is used to
inhibit other aural alerts generated by systems such as: Traffic
Alert and Collision Avoidance System (TCAS) or Ground Proximity
Warning System (GPWS) or other FWC warnings.
This inhibition occurs each time there is a PWS aural alert.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 20
Config-3 Nov 01/08
TAI
R 3. Power
____________
Supply
Energization of the system is through a 115VAC/400 Hz bus:
- 1XP via the sub-busbar 101 XP-C for transceiver 1.
Energization of the weather radar control unit and of the WR antenna drive
is through the transceiver.
Consumption of the transceiver is 145 W maximum.
The system is supplied through this circuit breaker:
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
R 4. Interface
_________
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 055 | WXR DATA | | | |1600|7.82| DIS| | |
| | | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 270 | CONTROL | | | | 32 |100 | DIS| | |
| | WORD 1 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 271 | CONTROL | | | | 32 |100 | DIS| | |
| | WORD 2 | | | | | | | | |
|--------------|----------|------------|----|----|----|----|----|-----|-------|
| 356 | Mainte- | | | | |100 |ISO5| | |
| | nance | | | | | | | | |
| | message | | | | | | | | |
| | word | | | | | | | | |
-------------------------------------------------------------------------------
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 21
Config-3 Feb 01/09
TAI
(1) Control Words (Labels 270 and 271)
The control words are transmitted on the control buses which connect
the weather radar control unit to the transceiver.
The control word 1 (label 270) provides the following data:
- gain,
- tilt angle,
- selected mode,
- stabilization (on/off),
- scan angle (normal/reduced),
- anticlutter (on/off) (optional)
- split function (Capt/Both/F/O) (optional)
The control word 2 (label 271) provides the following data:
- range,
- anticlutter (on/off) (optional),
- WR selected on the EFIS control section (master/slave).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 22
Config-3 Nov 01/08
TAI
Weather Radar - Manchester II Biphase Format
Figure 005
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 23
Config-3 Nov 01/08
TAI
-----------------------------------------------------------------------------
| BITS | FUNCTION |
|----------|----------------------------------------------------------------|
| 1-8 | Label 00101101 : 055 |
| 9-10 | Control Accept |
| 11 | Spare |
| 12 | Windshear Caution |
| 13 | Windshear Warning |
| 14-15 | Turbulence and Weather Alert |
| 16 | Anticlutter (not used) |
| 17 | Sector Scan |
| 18 | Stabilization Limits |
| 19 | Cooling Transceiver |
| 20 | Display Fault (not used) |
| 21 | Calibration or Air Data Input |
| 22 | Attitude Input |
| 23 | Control or Heading Input |
| 24 | Antenna |
| 25 | R/T or Radio Altimeter |
| 26 | Stabilization |
| 27-29 | Mode |
| 30-36 | Tilt Angle |
| 37-42 | Gain |
| 43-48 | Range |
| 49 | Windshear External Input Fault |
| 50-51 | Data Accept |
| 52-63 | Scan Angle |
| 64 | Windshear Failure |
| 65-1600 | Range Bin Data |
-----------------------------------------------------------------------------
The WR/PWS uses the Space address usage technology defined by the
ARINC specification 708A for transmission of information on data bus
lines. This is achieved by two different data bus lines, each
associated with a control bus line from an EFIS control section of
the FCU.
Data BUS 1 transmits always data associated to the range selected on
EFIS/CAPT (side 1).
Data BUS 2 transmits always data associated to the range selected on
EFIS/F/O (side 2).
The control and data bits of word label 055 are valid at any moment
on both DATA BUSES, even if the range selected on sides 1 and 2 of
FCU are different.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 24
Config-3 Nov 01/08
TAI
R 5. _____________________
Component Description
A. Transceiver
(3) A duplexer/monitor
The transmitter output is coupled through a duplexer/monitor to the
waveguide antenna feed through a 4-port circulator. Incorporated in
the duplexer operation are monitor circuits to monitor the output
power level and develop a frequency loop error signal for the
correction of frequency chirp.
The monitor circuit also accepts a test signal which causes a portion
of the reference signal to be injected into the receiver for test
calibration. The 4-port circulator also couples the RF return from
the waveguide antenna feed through the preamplifier to the receiver
portion of the transceiver.
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 25
Config-3 Feb 01/09
TAI
Weather radar - Architecture
Figure 006
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 26
Config-3 Nov 01/08
TAI
Weather radar - Architecture
Figure 006A
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 27
Config-3 Aug 01/07
TAI
Weather Radar Transceiver - Component Description
Figure 007
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 28
Config-3 Nov 01/08
TAI
(4) A preamplifier
The preamplifier assembly perform the waveguide limiter functions
(protects the mixer diodes from all high power pulses), contains a
noise diode circuit and contains a 2-stage RF amplifier which
provides +18dB of RF gain.
(5) A mixer
The mixer circuit processes the detected RF return signal by mixing
it with the First local oscillator signal and amplifying the
resultant Intermediate Frequency (IF) signal in the First IF
amplifier.
The first IF amplifier provides 25dB amplification before the First
IF signal is applied to the second IF amplifier.
(7) A sampler
The sampler commands and controls the receive and transmit functions
within the receiver-transmitter. A digital signal processor is used
to control transmitter timing and receiver normalizer.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 29
Config-3 Nov 01/08
TAI
- elevation maintenance routine, providing antenna elevation drive
control bus manager routine, determining correct control
configuration
- problem control monitor routine, programming the internal data
collection parameters of the transceiver
- data bus formatter routine, processing and assembling the control
message of the serial data word sent to the EFIS.
(11) A BITE/monitor
The BITE/monitor provides the BITE power supply voltages to BITE
functions and circuits, a power monitor for the detected transmitter
output and an interconnect for various signals used throughout the
transceiver.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 30
Config-3 Nov 01/08
TAI
Weather Radar - Antenna
Figure 008
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 31
Config-3 Nov 01/08
TAI
**ON A/C 228-299, 309-399, 401-499,
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 32
Config-3 Nov 01/08
TAI
R 6. Operation
_________
A. Operation
--------------------------------------------------------------------------
| LEVEL DETECTED | PRECIPITATION RATE | COLOR OF ECHOES |
|------------------------|-----------------------|-----------------------|
| Z1 < 20 dBz | less than 1 mm/h | black |
| 20 less than or equal | from 1 to 4 mm/h | green |
| to Z2 < 30 dBz | | |
| 30 less than or equal | from 4 to 12 mm/h | yellow |
| to Z3 < 40 dBz | | |
| 40 less than or equal | 12 mm/h and above | red |
| to Z4/Z5 < 50 dBz | | |
|------------------------|-----------------------|-----------------------|
| Turbulence | 5 m/s | magenta |
-------------------------------------------------------------------------|
Table 1: Color Correspondence Table
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 33
Config-3 Feb 01/09
TAI
R **ON A/C 211-212, 215-215, 218-227, 301-308,
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 34
Config-3 Nov 01/08
TAI
NOTE : In some cases, the pilot has to deselect windshear mode (PWS/
____
OFF/AUTO switch to OFF) for the following reasons:
- when the aircraft is at a gate area or in maintenance
hangars to avoid radiating danger for persons,
- when nuisance aural alerts are generated.
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 35
Config-3 Nov 01/08
TAI
WR/PWS - Logic of scanning mode
Figure 009
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 36
Config-3 Nov 01/08
TAI
On the contrary, when two different ranges are selected on the
EFIS control panels, the images are refreshed every 12 seconds.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 37
Config-3 Nov 01/08
TAI
If the radar is already operating in a weather detection mode when a
windshear is detected, no pilot intervention will be required.
If the radar is OFF when this event is detected, the radar operation
will automatically change to WX+T mode (if selected range is less
than 60NM) or WX mode (if selected range is more than 60NM), to
display weather and windshear icons.
The selected range does not change.
In windshear mode, the TILT and GAIN are controlled automatically on
the WR/PWS for the scanning.
However, the TILT displayed on the NDs is in accordance with this
selected on the radar control panel.
When the weather radar transceiver fails, the amber message PRED W/S
is displayed on the NDs associated with the amber messages:
- NAV: PRED W/S DET FAULT on the upper ECAM DU,
- PRED W/S DET in the INOP SYS item of the STATUS page on the SD.
The system 2 (if installed), has to be selected on the weather radar
control unit to display windshear information.
NOTE : In some cases, the pilot has to deselect windshear mode (PWS/
____
OFF/AUTO switch to OFF) for the following reasons:
- when the aircraft is at a gate area or in maintenance
hangars to avoid radiating danger for persons,
- when nuisance aural alerts are generated.
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 38
Config-3 Nov 01/08
R
TAI
An antenna scanning is performed in 4 seconds, this causes the
transmission of 760 data words at each antenna scanning.
The weather radar system features a 4-second constant refresh
rate of the WX image whatever the ranges selected on the CAPT and
F/O EFIS control sections of the FCU.
(c) Weather and windshear scan pattern, with windshear event detected
When the system is placed into alternate weather/windshear scan
pattern and the system detects a windshear event, the antenna
scan pattern is as follows:
- clockwise weather scan, from minus 90 deg. to plus 90 deg.
- counterclockwise windshear scan, from plus 90 deg. to minus 45
deg., with windshear processing between plus 45 deg. and minus
45 deg.
- the next clockwise scan is from minus 45 deg. to plus 45 deg.
to validate windshear
- the next counterclockwise scan is from plus 45 deg. to minus 90
deg. to validate windshear. No processing occurs between plus
45 deg. and minus 90 deg.
- clockwise WX scan, from minus 90 deg. to plus 90 deg.
The sequence is repeated as long as windshear event is
detected. If a windshear event is not detected, the system
reverts to the alternating weather/windshear scan pattern
described above.
The refresh rate of the WX image is minimum 16 sesonds due to
sharing processing between radar and windshear event detection.
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 39
Config-3 Aug 01/07
TAI
Windshear data are processed during both directions of antenna
scanning.
In this case the windshear mode works transparent to the flight
crew until a windshear event is detected.
The refresh rate of the display is 8 seconds.
NOTE : The display update rate (Ref. para. E.(4)(a)) is what the
____
flight crew actually sees. Cycle time describes what
Multiscan is doing in the background.
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 40
Config-3 Aug 01/07
TAI
Weather Radar - Multisan Scan Pattern
Figure 010
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 41
Config-3 Aug 01/07
TAI
(c) Windshear mode scan patterm
The Windshear mode is automatically activated below 2.300 FT AGL.
The time required for one radar sweep changes from 4 to 2.8
seconds due to the fact that the radar sweep changes from 180⁰ to
120⁰. In windshear mode, the first antenna scan (left to right)
is utilized for the Multiscan high beam. The second scan (right
to left) is a windshear scan. The third scan (left to right) is
utilized for Multiscan low beam. The fourth scan (right to left)
is, again, a windshear scan. Thus, total cycle time during
windshear mode is 11.2 seconds (Ref.Fig.010).
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 42
Config-3 Nov 01/08
TAI
Weather radar - Pulse Transmission Timing Diagram
Figure 011
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 43
Config-3 Nov 01/08
TAI
**ON A/C 228-299, 309-399, 401-499,
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 44
Config-3 May 01/08
TAI
Weather Radar - Windshear Transmit Pulse Pattern
Figure 012
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 45
Config-3 Aug 01/07
TAI
-----------------------------------
| Range | All Ranges |
|----------------|----------------|
| Element Size | 1.0 degree |
|----------------|----------------|
| Scan Rate | 45 deg/sec |
|----------------|----------------|
| Epoch Period | 22.975 ms |
-----------------------------------
Table b. Process Epoch Timing Table
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 46
Config-3 Aug 01/07
TAI
Sample Length = (range)/sample quantity⁵*K
Where:
range = sampled range
sample quantity = 512
K = 12.34 microseconds/NM (electromagnetic propagation constant)
The 512 range bins from the 40NM short range data set (6
microseconds tx pulses) and the 512 range bins from the 320NM
long range data set (20 microseconds tx pulses) are
interpolated/decimated to produce the final 256 data bin set
suitable for output at the selected range. The 256 range bins are
then linearly expanded to fill the 512 ARINC 708A data bus range
bins. The transceiver displays radar returns with a range
accuracy of 5% or 1/2NM whichever is larger.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 47
Config-3 Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-227, 301-308,
(c) A TILT selector switch, item 3, which enables the control of the
antenna elevation.
Antenna position is read in degrees, opposite the notch on the
switch:
- either from 0 to 15 deg. upwards (UP),
- or from 0 to 15 deg. downwards (DN).
(e) A PWS switch, item 2, with two stable positions AUTO/OFF, which
enables the selection of the windshear function.
(f) A GND CLTR SPRS switch, item 4, with two stable positions ON/OFF,
which enables the selection of the ground clutter suppression.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 48
Config-3 Nov 01/08
TAI
Weather Radar - Control Unit
Figure 013
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 49
Config-3 Nov 01/08
TAI
(b) A TILT selector switch, item 3, which enables the control of the
antenna elevation.
Antenna position is read in degrees, opposite the notch on the
switch:
- either from 0 to 15 deg. upwards (UP)
- or from 0 to -15 deg. downwards (DN).
(b) A scale selector switch, item 2, common to EFIS, FMGS and radar
systems, enables the selection of 10, 20, 40, 80, 160 or 320
operation range in nautical miles (NM) for display of the weather
radar image on the CAPT and F/O NDs.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 50
Config-3 Nov 01/08
TAI
Windshear information is presented in the 10 NM minimum range and
on other selected ranges. Morever, yellow radial lines are
displayed to indicate the W/S included location.
NOTE : In the ARC or ROSE mode, if the CAPT or the F/O switches
____
to the OFF mode FM, the offside weather image will also be
transferred on the ND. Only one scale selector switch can
then control the weather radar image display.
NOTE : When the aircraft is parked, the TEST mode on the MCDU must be
____
preferably selected as a safety precaution.
On either EFIS control section of the FCU, the mode selector switch
must be set to the ARC or ROSE position to obtain the image display
on the corresponding ND.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 51
Config-3 Nov 01/08
TAI
(2) Utilization of the weather radar control unit
- MAP
This mode is only used for display of the ground map. A
combination of transceiver gain, antenna position (TILT) and
range selection enables the display of a larger area and the
identification of major changes in the ground map (e.g. a sea
cost, a lake, a mountain, an island...).
The color display follows the color mentioned in correspondence
table (see table 1 - para. 7. A.)
If the image is too bright, due to too great reflection
intensity, it can be dimmed by the GAIN potentiometer, item 1.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 52
Config-3 Nov 01/08
TAI
Weather Radar - Control Unit
Figure 013A
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 53
Config-3 May 01/08
TAI
(b) System selection and start up: 1/OFF/2 switch (item 6)
This switch enables:
- the selection and activation of the transceiver 1 or 2 (if the
second transceiver is installed),
- the suppression of the radar image on the NDs when these NDs
are in the ARC or ROSE mode.
- MAP
This mode is only used for display of the ground map. A
combination of transceiver gain, antenna position (TILT) and
range selection enables the display of a larger area and the
identification of major changes in the ground map (e.g. a sea
cost, a lake, a mountain, an island...).
The color display follows the color mentioned in correspondence
table (see table 1 - para. 7. A.)
If the image is too bright, due to too great reflection
intensity, it can be dimmed by the GAIN potentiometer, item 5.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 54
Config-3 Nov 01/08
TAI
- the suppression of the radar image on the NDs when these NDs
are in the ARC or ROSE mode.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 55
Config-3 Nov 01/08
TAI
**ON A/C 401-402,
R
EFF :
401-402, 34-41-00
Page 56
Config-3 May 01/08
TAI
The GCS function is available in Multiscan Automatic operation
for the WX and WXR+T modes. GCS is not active during MAP mode
where terrain is being displayed. GCS is not available in MANUAL
operation.
(e) MAN/AUTO TILT switch, item 6, this mode is used to select between
manual mode or autotilt mode.
In MAN position, all controls operate as described in the manual
mode.
In AUTO position, the system operates in autotilt mode (automatic
tilt and no action of the crew is necessary).
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 57
Config-3 Nov 01/08
R
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 58
Config-3 Nov 01/08
TAI
EFIS Control Sections and EFIS Switching Panels
Figure 014
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 59
Config-3 Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-227, 301-308,
The various failures which can affect the radar image are listed in
decreasing order of importance. If several failures occur, only the
most important one is displayed (Ref. details C) and D) on the
figure).
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 60
Config-3 Nov 01/08
TAI
Weather radar - Data Displayed on the NDs
Figure 015
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 61
Config-3 Nov 01/08
TAI
Two types of failures can affect the radar system:
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 62
Config-3 Nov 01/08
TAI
**ON A/C 228-299, 309-399, 401-499,
The various failures which can affect the radar image are listed in
decreasing order of importance. If several failures occur, only the
most important one is displayed (Ref. details C) and D) on the
figure).
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 63
Config-3 Nov 01/08
TAI
Weather radar - Data Displayed on the NDs
Figure 015A
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 64
Config-3 May 01/08
TAI
Two types of failures can affect the radar system:
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 65
Config-3 May 01/08
R
TAI
(c) Operational message that does not affect the radar image
The following message is displayed in green instead of the TILT
value
- PWS SCAN : indicates that the weather radar operates in windshear mode only
(weather radar system selector switch set to OFF and windshear
mode selector switch set to AUTO on weather radar control
unit).
On ground the qualifier logic has to be satisfied.
(5) Windshear data displayed (Ref. table 2 below) (if the predictive
windshear function is activated)
(Ref. Fig. 016)
1
_ Alert levels
There are three alert levels defined in function of event
seriousness and distance from the aircraft. The weather radar
provides the crew with visual and aural warnings which vary in
function of the level detected.
a
_ Windshear warning alert (level 3)
This alert corresponds to the most dangerous phenomenons.
It is generated for windshear events detected within +/-
0.25 NM from the longitudinal axis of the aircraft and
within +/- 30 deg. scan of the aircraft heading.
On the ground, the maximum range is 3 NM. In flight, the
maximum range is reduced to 1.5 NM.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 66
Config-3 Nov 01/08
TAI
Windshear - Data Displayed on the NDs
Figure 016
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 67
Config-3 Nov 01/08
TAI
Windshear - Data Displayed on the NDs
Figure 016A
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 68
Config-3 May 01/08
R
TAI
Windshear - Windshear Alert Ranges and Altitudes
Figure 017
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 69
Config-3 Nov 01/08
TAI
Windshear - Windshear Alert Levels and Locations
Figure 018
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 70
Config-3 Nov 01/08
TAI
During takeoff, level 3 covers ranges from 0 to 1.5 NM,
from 50 to 1200 ft Above Ground Level (AGL). During
landing, this coverage is from 1.5 to 0.5 NM, from 370 to
50 ft.
Range reduction is a linear function of altitude: at 370
ft, range is equal to 1.5 NM and reaches 0.5 NM at 50 ft.
During takeoff, this warning is inhibited from the time the
aircraft attains 100 kts and until it reaches 50 ft AGL.
Level 3 warning is inhibited below 50 ft (in approach
phase) and above 1200 ft.
The windshear warning alert is announced by:
- an aural warning message: GO AROUND WINDSHEAR AHEAD in
approach or WINDSHEAR AHEAD, WINDSHEAR AHEAD at takeoff,
generated by the radar synthesized voice.
- a visual warning: red W/S AHEAD message on the PFD.
Display priority on PFD is given to level 3.
The computer has to determine whether the aircraft is
taking-off or landing to generate the aural warning message
GO AROUND, WINDSHEAR AHEAD or WINDSHEAR AHEAD, WINDSHEAR
AHEAD.
Transition between the GO AROUND, WINDSHEAR AHEAD and
WINDSHEAR AHEAD, WINDSHEAR AHEAD aural warning messages is
controlled by the GEAR UP discrete input.
b
_ Windshear caution alert (level 2)
This level covers the events detected in a region from 0 to
3 NM, within +/- 30 deg. of the aircraft heading but
outside the windshear warning alert region (level 3).
This caution alert is inhibited:
- during takeoff, from the time the aircraft attains 100
kts and until it reaches 50 ft AGL,
- during landing, below 50 ft AGL.
There should be no windshear caution alert (level 2) above
1200 ft.
The windshear caution alert is announced by:
- an aural warning: MONITOR RADAR DISPLAY
- a visual warning: amber W/S AHEAD message on the PFD.
c
_ Windshear advisory alert (level 1)
This level covers the events located within 5 NM from the
aircraft, within +/- 30 deg. of the aircraft heading but
outside the windshear warning and caution alert regions
(levels 2 and 3).
There should be no windshear advisory alert (level 1) above
1500 ft.
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 71
Config-3 Nov 01/08
TAI
No aural or visual warnings are provided for this advisory
alert: only the windshear icon is superimposed on the radar
image.
The weather radar transmits the windshear alerts following
their detection order. A maximum of 8 events can be
transmitted. Therefore, alerts of different levels can be
generated simultaneously.
-------------------------------------------------------------------------------
| ALERTS | PFD | ND | AURAL WARNING |
|-------------|-----------------|-------------------|-------------------------|
| Advisory | | windshear icon | |
|-------------|-----------------|-------------------|-------------------------|
| Caution | W/S AHEAD | windshear icon | MONITOR |
| | (AMBER) | | RADAR DISPLAY |
|-------------|-----------------|-------------------|-------------------------|
| Warning | W/S AHEAD | windshear icon | during takeoff: |
| | (RED) | | WINDSHEAR AHEAD |
| | | | WINDSHEAR AHEAD |
| | | | during landing: |
| | | | GO AROUND |
| | | | WINDSHEAR AHEAD |
-------------------------------------------------------------------------------
Table 2: Windshear Data Displayed
(5) Windshear data displayed (Ref. table 2 below) (if the predictive
windshear function is activated)
(Ref. Fig. 016A)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 72
Config-3 Nov 01/08
TAI
bottom right-hand corner of the NDs instead of the tilt
indication to inform the crew that the weather radar operates in
windshear mode only.
1
_ Alert levels
There are three alert levels defined in function of event
seriousness and distance from the aircraft. The weather radar
provides the crew with visual and aural warnings which vary in
function of the level detected.
a
_ Windshear warning alert (level 3)
This alert corresponds to the most dangerous phenomenons.
It is generated for windshear events detected within +/-
0.25 NM from the longitudinal axis of the aircraft and
within +/- 30 deg. scan of the aircraft heading.
On the ground, the maximum range is 3 NM. In flight, the
maximum range is reduced to 1.5 NM.
During takeoff, level 3 covers ranges from 0 to 1.5 NM,
from 50 to 1200 ft Above Ground Level (AGL). During
landing, this coverage is from 1.5 to 0.5 NM, from 370 to
50 ft.
Range reduction is a linear function of altitude: at 370
ft, range is equal to 1.5 NM and reaches 0.5 NM at 50 ft.
During takeoff, this warning is inhibited from the time the
aircraft attains 100 kts and until it reaches 50 ft AGL.
Level 3 warning is inhibited below 50 ft (in approach
phase) and above 1200 ft.
The windshear warning alert is announced by:
- an aural warning message: GO AROUND WINDSHEAR AHEAD in
approach or WINDSHEAR AHEAD, WINDSHEAR AHEAD at takeoff,
generated by the radar synthesized voice.
- a visual warning: red W/S AHEAD message on the PFD.
Display priority on PFD is given to level 3.
The computer has to determine whether the aircraft is
taking-off or landing to generate the aural warning message
GO AROUND, WINDSHEAR AHEAD or WINDSHEAR AHEAD, WINDSHEAR
AHEAD.
Transition between the GO AROUND, WINDSHEAR AHEAD and
WINDSHEAR AHEAD, WINDSHEAR AHEAD aural warning messages is
controlled by the GEAR UP discrete input.
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 73
Config-3 Nov 01/08
TAI
b
_ Windshear caution alert (level 2)
This level covers the events detected in a region from 0 to
3 NM, within +/- 30 deg. of the aircraft heading but
outside the windshear warning alert region (level 3).
This caution alert is inhibited:
- during takeoff, from the time the aircraft attains 100
kts and until it reaches 50 ft AGL,
- during landing, below 50 ft AGL.
There should be no windshear caution alert (level 2) above
1200 ft.
The windshear caution alert is announced by:
- an aural warning: MONITOR RADAR DISPLAY
- a visual warning: amber W/S AHEAD message on the PFD.
c
_ Windshear advisory alert (level 1)
This level covers the events located within 5 NM from the
aircraft, within +/- 30 deg. of the aircraft heading but
outside the windshear warning and caution alert regions
(levels 2 and 3).
There should be no windshear advisory alert (level 1) above
1500 ft.
No aural or visual warnings are provided for this advisory
alert: only the windshear icon is superimposed on the radar
image.
The weather radar transmits the windshear alerts following
their detection order. A maximum of 8 events can be
transmitted. Therefore, alerts of different levels can be
generated simultaneously.
-------------------------------------------------------------------------------
| ALERTS | PFD | ND | AURAL WARNING |
|-------------|-----------------|-------------------|-------------------------|
| Advisory | | windshear icon | |
|-------------|-----------------|-------------------|-------------------------|
| Advisory | | PWS SCAN | |
| in windshear| | (GREEN) | |
| mode only | | | |
|-------------|-----------------|-------------------|-------------------------|
| Caution | W/S AHEAD | windshear icon | MONITOR |
| | (AMBER) | | RADAR DISPLAY |
|-------------|-----------------|-------------------|-------------------------|
| Warning | W/S AHEAD | windshear icon | during takeoff: |
| | (RED) | | WINDSHEAR AHEAD |
| | | | WINDSHEAR AHEAD |
| | | | during landing: |
| | | | GO AROUND |
| | | | WINDSHEAR AHEAD |
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 74
Config-3 Nov 01/08
TAI
-------------------------------------------------------------------------------
| ALERTS | PFD | ND | AURAL WARNING |
|-------------|-----------------|-------------------|-------------------------|
-------------------------------------------------------------------------------
Table 2: Windshear Data Displayed
(6) Windshear warning displayed (Ref. table 3 below) (if the predictive
windshear function is activated)
(Ref. Fig. 019)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 75
Config-3 Nov 01/08
TAI
Messages Displayed on ND and upper ECAM DU
Figure 019
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 76
Config-3 Nov 01/08
TAI
-------------------------------------------------------------------------------
| | UPPER DU ECAM | ND | AURAL WARNING |
|-------------|-----------------|-------------------|-------------------------|
| PWS | NAV: | PRED W/S | Single chime |
| SYSTEM | PRED. W/S DET | (AMBER) | |
| FAULT | FAULT | | |
| | (AMBER) | | |
|-------------|-----------------|-------------------|-------------------------|
| WINDSHEAR | PRED. W/S OFF | | |
| AUTO/OFF | (GREEN or AMBER)| | |
| SWITCH ON | | | |
| CONTROL | | | |
| UNIT IN | | | |
| OFF | | | |
| POSITION | | | |
-------------------------------------------------------------------------------
Table 3: PWS INOPERATIVE - Warning Data Displayed
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 77
Config-3 Nov 01/08
TAI
E. Reconfiguration switching
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 78
Config-3 Nov 01/08
TAI
R 7. Test
____
A. BITE Description
(1) General
The BITE facilitates maintenance on in-service aircraft. It detects
and identifies a failure related to the system.
The BITE of the WR/PWS is situated in the radar transceiver and
through two ARINC 429 low-speed buses (an input bus from the CFDIU
and an output bus to the CFDIU).
The BITE:
- transmits permanently weather radar system status and its
identification message to the CFDIU,
- memorizes the failures which occurred during the last 63 flight
legs,
- monitors data inputs from the various peripherals (EFIS control
section, ADIRUs, RAs),
- transmits to the CFDIU the result of the tests performed and
self-tests,
- can communicate with the CFDIU through the MCDU menus.
- acquires the general maintenance parameters (UTC, date, A/C
ident...) and command codes from the CFDIU.
The PWS interface with the CFDIU is composed of:
- an ARINC 429 low speed bus from the CFDIU.
The data sent by the CFDIU are:
---------------------------------------------------------
| LABEL | PARAMETER | FORMAT |
---------------------------------------------------------
| 125 | UTC | BCD |
| 155 | AIRCRAFT CONFIGURATION 1 | DISC |
| 156 | AIRCRAFT CONFIGURATION 2 | DISC |
| 227 | COMMAND | DISC |
| 260 | DATE | BCD |
| 301 | AIRCRAFT IDENT | ISO |
| 302 | AIRCRAFT IDENT | ISO |
| 303 | AIRCRAFT IDENT | ISO |
---------------------------------------------------------
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 79
Config-3 Feb 01/09
TAI
---------------------------------------------------------
| LABEL | PARAMETER | FORMAT |
---------------------------------------------------------
| 354 | LRU IDENTIFICATION | ISO |
| 356 | FAULT MESSAGES | ISO |
| 377 | EQUIPMENT IDENTIFICATION | BCD |
---------------------------------------------------------
The BITE can operate in two operating modes:
* in normal mode, to report continuously the failures of all
classes, depending on the maintenance flight phase,
* in interactive mode, to provide an interactive dialog with
an operator using an MCDU.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 80
Config-3 Nov 01/08
TAI
Weather Radar - Maintenance Test Procedure - Access to the RADAR page
Figure 020
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 81
Config-3 Nov 01/08
TAI
Weather Radar - Maintenance Test Procedure - Sub-menus (Sheet 1)
Figure 021
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 82
Config-3 Nov 01/08
TAI
-------------------------------------------------------------
| Reported Internal Failures |
|-----------------------------------------------------------|
| MESSAGE | CLASS | ATA |
-------------------------------------------------------------
| WXR1 (1SQ1) | 1 | 34-41-33 |
| WXR ANTENNA (11SQ) | 1 | 34-41-11 |
| WXR CNT PNL (3SQ)/WXR1 (1SQ1) | 1 | 34-41-12 |
| WXR MOUNTING TRAY (9SQ) | 1 | 34-41-37 |
-------------------------------------------------------------
-------------------------------------------------------------
| Reported External Failures |
|-----------------------------------------------------------|
| MESSAGE | CLASS | ATA |
-------------------------------------------------------------
| ADIRU1 (1FP1) ADR BUS/WXR1 (1SQ1) | 3 | 34-12-34 |
| ADIRU3 (1FP3) ADR BUS/WXR1 (1SQ1) | 3 | 34-12-34 |
| ADIRU1 (1FP1) IR BUS/WXR1 (1SQ1) | 1 | 34-12-34 |
| ADIRU3 (1FP3) IR BUS/WXR1 (1SQ1) | 1 | 34-12-34 |
| FCU (3CA) CP-L BUS/WXR1 (1SQ1) | 1 | 22-81-12 |
| FCU (3CA) CP-R BUS/WXR1 (1SQ1) | 1 | 22-81-12 |
| CFDIU (1TW)/WXR1 (1SQ1) | 3 | 31-32-34 |
| RA1 (2SA1)/WXR1 (1SQ1) | 3 | 34-42-33 |
| RA2 (2SA2)/WXR1 (1SQ1) | 3 | 34-42-33 |
| RA1 (2SA1)+RA2 (2SA2)/WXR1 (1SQ1) | 1 | 34-42-33 |
| POWER SUPPLY INTERRUPT | 1 | 24-00-00 |
-------------------------------------------------------------
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 83
Config-3 Nov 01/08
TAI
Weather Radar - Maintenance Test Procedure - Sub-menus (Sheet 1)
Figure 021A
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 84
Config-3 Nov 01/08
TAI
Weather Radar - Maintenance Test Procedure - Sub-menus (Sheet 2)
Figure 022
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 85
Config-3 Nov 01/08
TAI
By pressing the line key adjacent to the failure message, the
operator is allowed to the corresponding Trouble Shooting Data. The
peripheral monitoring and WR/PWS internal cyclic tests are used to
detect transient failures.
- TROUBLE SHOOTING DATA
(Ref. Fig. 022)
Provides correlation parameters and snapshot data concerning the
failure displayed in the LAST LEG REPORT and PREVIOUS LEGS REPORT.
- CLASS 3 FAULTS
(Ref. Fig. 023)
Allows to display the class 3 faults recorded during the last
flight leg.
- GROUND REPORT
(Ref. Fig. 023)
Allows to present the class 1, 2 or 3 internal failures detected on
ground.
These failures differ from those displayed on the LAST LEG REPORT
and CLASS 3 FAULTS.
By pressing the line key adjacent to the failure message, the
operator is allowed to access to the corresponding Trouble Shooting
Data.
- TEST
(Ref. Fig. 024, 025, 026)
Allows a check of the correct operation of the WR/PWS on ground.
This test can be performed through the CFDS by selecting on the
MCDU the test function on the RADAR 1 main menu page.
At the end of the BITE TEST, the test pattern comes into view.
(Ref. Fig. 027)
All the information displayed on the MCDU during the BITE TEST
configuration can be printed by the printer (Ref. 31-35-00).
By pressing the line key adjacent to the internal failure message,
the operator is allowed to access to the corresponding Trouble
Shooting Data.
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 86
Config-3 Nov 01/08
TAI
Weather Radar - Maintenance Test Procedure - Sub-menus (Sheet 3)
Figure 023
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 87
Config-3 Nov 01/08
TAI
Weather Radar - Maintenance Test Procedure - Sub-menus (Sheet 4)
Figure 024
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 88
Config-3 Nov 01/08
TAI
Weather Radar - Maintenance Test Procedure - Sub-menus (Sheet 5)
Figure 025
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 89
Config-3 Nov 01/08
TAI
Weather Radar - Maintenance Test Procedure - Sub-menus (Sheet 6)
Figure 026
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 90
Config-3 Nov 01/08
TAI
Weather Radar - Test Pattern
Figure 027
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 91
Config-3 Nov 01/08
TAI
INTENTIONALLY BLANK
R
34-41-00
Page 92
Config-3 Nov 01/08
TAI
INTENTIONALLY BLANK
R
34-41-00
Page 93
Config-3 Nov 01/08
TAI
INTENTIONALLY BLANK
R
34-41-00
Page 94
Config-3 Nov 01/08
TAI
**ON A/C 228-299, 309-399, 401-499,
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 95
Config-3 May 01/08
TAI
-------------------------------------------------------------
| Reported Internal Failures |
|-----------------------------------------------------------|
| MESSAGE (i = 1 or 2) | CLASS | ATA |
-------------------------------------------------------------
| WXRi (1SQi) | 1 | 34-41-33 |
| WXR ANTENNA (11SQ) | 1 | 34-41-11 |
| WXR CTL PNL (3SQ)/WXRi (1SQi) | 1 | 34-41-12 |
| WXR MOUNTING TRAY (9SQ) | 1 | 34-41-37 |
-------------------------------------------------------------
-------------------------------------------------------------
| Reported External Failures |
|-----------------------------------------------------------|
| MESSAGE (i = 1 or 2) | CLASS | ATA |
-------------------------------------------------------------
| ADIRU1 (1FP1) BUS ADR/WXR1 (1SQ1) | 3 | 34-12-34 |
| ADIRU2 (1FP2) BUS ADR/WXR2 (1SQ2) | 3 | 34-12-34 |
| ADIRU3 (1FP3) BUS ADR/WXRi (1SQi) | 3 | 34-12-34 |
| ADIRU1 (1FP1) BUS IR/WXR1 (1SQ1) | 1 | 34-12-34 |
| ADIRU2 (1FP2) BUS IR/WXR2 (1SQ2) | 1 | 34-12-34 |
| ADIRU3 (1FP3) BUS IR/WXRi (1SQi) | 1 | 34-12-34 |
| ADIRU1+3 (1FP1+3)/WXR1 (1SQ1) | 1 | 34-12-34 |
| ADIRU2+3 (1FP2+3)/WXR2 (1SQ2) | 1 | 34-12-34 |
| QUALIFIER B1/2/WXRi (1SQi) | 1 | 79-33-11 |
| QUALIFIER C1/2/WXRi (1SQi) | 1 | 34-12-34 |
| QUALIFIER D1/2/WXRi (1SQi) | 1 | 34-12-34 |
| FCU (3CA) BUS CP-L/WXRi (1SQi) | 1 | 22-81-12 |
| FCU (3CA) BUS CP-R/WXRi (1SQi) | 1 | 22-81-12 |
| CFDIU (1TW)/WXRi (1SQi) | 3 | 31-32-34 |
| RA1 (2SA1)/WXRi (1SQi) | 3 | 34-42-33 |
| RA2 (2SA2)/WXRi (1SQi) | 3 | 34-42-33 |
| RA1 (2SA1)+RA2 (2SA2)/WXRi (1SQi) | 1 | 34-42-33 |
| GPWC (1WZ)/WXRi (1SQi) | 1 | 34-48-34 |
| POWER SUPPLY INTERRUPT | 1 | 24-00-00 |
-------------------------------------------------------------
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 96
Config-3 May 01/08
R
TAI
Allows to display the P/N, the S/N and the SW/N of the
equipment.
- GND SCANNING
(Ref. Fig. 022)
Based on the monitoring and fault analysis during flight,
provides information of the failures detected while using
this function.
The WR/PWS peripheral monitoring and internal cycle tests
are used to detect transient failures.
By pressing the line key adjacent to the failure message,
the operator is allowed to the corresponding Trouble
Shooting Data. The peripheral monitoring and WR/PWS internal
cyclic tests are used to detect transient failures.
- TROUBLE SHOOTING DATA
(Ref. Fig. 022)
Provides correlation parameters and snapshot data concerning
the failure displayed in the LAST LEG REPORT and PREVIOUS
LEGS REPORT.
- CLASS 3 FAULTS
(Ref. Fig. 023)
Allows to display the class 3 faults recorded during the
last flight leg.
- GROUND REPORT
(Ref. Fig. 023)
Allows to present the class 1, 2 or 3 internal failures
detected on ground.
These failures differ from those displayed on the LAST LEG
REPORT and CLASS 3 FAULTS.
By pressing the line key adjacent to the failure message,
the operator is allowed to access to the corresponding
Trouble Shooting Data.
- TEST
(Ref. Fig. 024, 025, 026)
Allows a check of the correct operation of the WR/PWS on
ground.
This test can be performed by:
- either selecting the test function on the LCD of the WR
transceiver
- or through the CFDS by selecting on the MCDU the test
function on the RADAR 1 (or 2) main menu page.
At the end of the BITE TEST, the test pattern comes into
view.
(Ref. Fig. 027)
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 97
Config-3 Aug 01/07
TAI
If the failure does not affect the radar mode, the test
pattern stays available.
If the failure affects the radar mode, nothing is shown.
All the information displayed on the MCDU during the BITE TEST
configuration can be printed by the printer (Ref. 31-35-00).
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 98
Config-3 Aug 01/07
TAI
WEATHER RADAR SYSTEM - ADJUSTMENT/TEST
______________________________________
TASK 34-41-00-720-002
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-41-00
Page 501
Nov 01/07
TAI
3. __________
Job Set-up
Subtask 34-41-00-010-052
A. Get Access
WARNING : DO NOT OPEN THE RADOME IF THE WIND SPEED IS MORE THAN 35 KNOTS.
_______
(3) Make sure that the retaining arms of the radome lock correctly.
Subtask 34-41-00-480-050
(4) Do not install the O-ring between the waveguide assembly and the
dummy load.
(5) Make sure that there is no space between the waveguide assembly and
the dummy load and that their connection is correct.
(6) Remove the two screws that prevent operation of the AZ and EL
selector switches on the antenna drive unit.
(7) Make sure that the AZ and EL selector switches are at ON and that the
antenna is free to move in azimuth and in elevation.
EFF :
ALL 34-41-00
Page 502
Nov 01/07
TAI
Subtask 34-41-00-865-059
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
Subtask 34-41-00-860-062
(2) Do the EIS start procedure (EFIS only) (Ref. TASK 31-60-00-860-001).
(6) On the center pedestal, on the weather radar control unit, set:
- the system switch to OFF
- the GAIN potentiometer to AUTO (or CAL)
- the TILT selector switch to 0⁰
- the mode selector switch to WX
- the windshear mode switch to OFF.
4. Procedure
_________
Subtask 34-41-00-720-050
EFF :
ALL 34-41-00
Page 503
Nov 01/02
TAI
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R 1. On the weather radar control Make sure that the antenna turns in
R unit: azimuth.
R - set the system switch to 1 (or
R ON).
R 2. On the antenna drive unit: Make sure that the antenna scanning
R - set the EL and AZ selector stops after some seconds.
R switches to OFF
EFF :
ALL 34-41-00
Page 504
Feb 01/02
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R - gradually turn the TILT - make sure that the antenna turns in
R selector switch to 5 deg. down elevation 5 deg. down.
R (5 DN notch)
R
EFF :
ALL 34-41-00
Page 505
Feb 01/02
TAI
5. Close-up
________
Subtask 34-41-00-860-063
(1) On the CAPT and F/O EFIS switching panels 417VU and 418VU, set the ND
potentiometers to OFF.
(2) Do the EIS stop procedure (EFIS only) (Ref. TASK 31-60-00-860-002).
Subtask 34-41-00-080-050
R (2) Install the O-ring on the waveguide connector on the antenna drive
unit.
R (3) Connect the waveguide assembly to the antenna drive unit and lock the
quick-disconnect fastener.
R (4) Make sure that the AZ and EL selector switches are at ON and that the
antenna is free to move in azimuth and in elevation.
R (5) Tighten the two screws that prevent operation of the AZ and EL
selector switches on the antenna drive unit.
Subtask 34-41-00-410-052
C. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
(2) Close the access door 811 and the radome 110AL (Ref. TASK 53-15-11-
410-001).
EFF :
ALL 34-41-00
Page 506
Aug 01/05
TAI
R (3) Remove the access platform(s).
R
EFF :
ALL 34-41-00
Page 507
Feb 01/02
TAI
TASK 34-41-00-740-002
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-41-00
Page 508
Nov 01/08
TAI
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-41-00-860-053-B
(2) Do the EIS start procedure (EFIS only) (Ref. TASK 31-60-00-860-001).
(5) On the FCU, on the CAPT and F/O EFIS control sections :
- set the mode selector switches to ARC.
EFF :
ALL 34-41-00
Page 509
Nov 01/07
TAI
R **ON A/C 211-212, 215-215, 218-228, 301-309, 401-402,
Subtask 34-41-00-860-053-C
(5) On the FCU, on the CAPT and F/O EFIS control sections :
- set the mode selector switches to ARC.
Subtask 34-41-00-860-053-D
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 510
Nov 01/08
TAI
(4) On the center pedestal, on the radar control unit, set :
- the SYS 1/OFF/2 selector switch to OFF
- the GAIN potentiometer to CAL
- the TILT selector switch to 0 deg.
- the MODE selector switch to WX
- the PWS/OFF/AUTO switch to OFF.
(5) On the FCU, on the CAPT and F/O EFIS control sections :
- set the mode selector switches to ARC.
Subtask 34-41-00-865-055
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
4. Procedure
_________
Subtask 34-41-00-740-050
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
EFF :
ALL 34-41-00
Page 511
Nov 01/07
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to
the RADAR 1 indication
- push the line key adjacent to - On the CAPT and F/O NDs :
the TEST indication. * a TILT indication comes into view
on the right side until the end of
the test.
* the TEST PATTERN is shown from one
side to the opposite side
(Ref. Fig. 501/TASK 34-41-00-991-001)
* a WR TEST indication comes into
view on the right side with scan from
0⁰ to 135⁰.
At the end of the test, on the MCDU,
the TEST OK indication comes into view.
- push the line key adjacent to - on the CAPT and F/O NDs :
the RETURN indication. the TEST PATTERN and the WR TEST
indication go out of view.
Subtask 34-41-00-740-050-A
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
2. On the MCDU:
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-402,
34-41-00
Page 512
Nov 01/08
TAI
Weather Radar Test
Figure 501/TASK 34-41-00-991-001
R
EFF :
001-050, 053-099, 201-203, 34-41-00
Page 513
Nov 01/07
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to On the MCDU:
the TEST indication. - these instructions come into view:
SYSTEM OFF
CHANGE CONTROL PANEL SYSTEM SWITCH TO
ON
AFTER TEST
SWITCH SYSTEM TO OFF
R
EFF :
401-402,
211-212, 215-215, 218-228, 301-309, 34-41-00
Page 514
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
In the loud speakers, you can hear:
- the warning MONITOR RADAR DISPLAY
- the single chime
R
EFF :
401-402,
211-212, 215-215, 218-228, 301-309, 34-41-00
Page 515
Nov 01/08
TAI
Weather Radar Test
Figure 501A/TASK 34-41-00-991-001-A
R
EFF :
211-212, 215-215, 218-227, 301-308, 34-41-00
Page 516
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
**ON A/C 228-228, 309-309, 401-402,
On the MCDU:
- these instructions are shown:
MAKE SURE AUDIO ALERTS SEQUENCE
OCCURRED:
- PWS CAUTION:MONITOR RADAR DISPLAY
- PWS WARNING:GO AROUND WINDSHEAR
AHEAD ONCE + WINDSHEAR AHEAD TWICE
R
EFF :
401-402,
211-212, 215-215, 218-228, 301-309, 34-41-00
Page 517
Nov 01/08
TAI
Weather Radar Test
Figure 501B/TASK 34-41-00-991-001-B
R
EFF :
228-299, 309-399, 401-499, 34-41-00
Page 518
Nov 01/06
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the RADAR 1 page comes into view.
the RETURN indication.
11. On the center pedestal, on the On the CAPT and F/O NDs:
radar control unit: - the WR TEST and the tilt indications
- set the PWS AUTO/OFF switch to go out of view after some seconds.
OFF.
- set the ON/OFF selector switch
to OFF.
Subtask 34-41-00-740-050-B
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On one MCDU, on the NAV menu - the RADAR 1 (RADAR 2) page comes into
page: view.
- push the line key adjacent to
the RADAR 1 (RADAR 2)
indication
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 519
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
MAKE SURE SEQUENCE OCCURS AFTER
PUSHING START TEST LINE KEY:
- ON PFDS:W/S AHEAD AMBER
EFF :
229-299, 310-399, 403-499, 34-41-00
Page 520
Nov 01/06
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- the MASTER CAUT lights come on
On the MCDU:
- these instructions are shown:
MAKE SURE AUDIO ALERTS SEQUENCE
OCCURRED:
- PWS CAUTION:MONITOR RADAR DISPLAY
- PWS WARNING:GO AROUND WINDSHEAR
AHEAD ONCE + WINDSHEAR AHEAD TWICE
EFF :
229-299, 310-399, 403-499, 34-41-00
Page 521
Nov 01/06
R
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the TEST OK indication is shown.
the YES indication.
11. On the center pedestal, on the On the CAPT and F/O NDs:
radar control unit: - the WR TEST and the tilt indications
- set the PWS AUTO/OFF switch to go out of view after some seconds.
OFF.
- set the SYS 1/OFF/2 selector
switch to OFF.
5. Close-up
________
Subtask 34-41-00-860-054
(1) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
(2) On the panels 301VU and 500VU, set the PFD and ND potentiometers to
OFF.
(3) On the ADIRS CDU, set the OFF/NAV/ATT selector switches to OFF.
(4) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-41-00
Page 522
Nov 01/07
TAI
(5) De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002)
Subtask 34-41-00-860-054-A
(1) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
(2) On the panels 301VU and 500VU, set the PFD and ND potentiometers to
OFF.
(4) Make sure that the work area is clean and clear of tool(s) and other
items.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-41-00
Page 523
Nov 01/08
TAI
**ON A/C ALL
TASK 34-41-00-730-001
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
R WARNING : STOP THE FUEL TANKER 60 m (196.85 ft) FROM THE AIRCRAFT NOSE WHILE
_______
R THE WEATHER RADAR OPERATES.
R DO NOT OPERATE THE FUEL TANKER/PUMP UNIT UNTIL YOU STOP THE OPERATION
R OF THE WEATHER RADAR.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-41-00
Page 524
May 01/07
TAI
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-41-00-865-053
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
Subtask 34-41-00-010-050
B. Get Access
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER
_______
RADAR ARE OPENED, SAFETIED AND TAGGED.
(1) In the cockpit, put a warning notice on the center pedestal to tell
persons not to operate the weather radar.
(2) Put the access platform in position in zone 110 below the radome.
(4) Make sure that the retaining arms of the radome lock correctly.
R
EFF :
ALL 34-41-00
Page 525
Nov 01/06
TAI
**ON A/C 001-050, 053-099, 201-203,
Subtask 34-41-00-860-050-B
(2) Do the EIS start procedure (EFIS only) (Ref. TASK 31-60-00-860-001).
(3) On the ADIRS CDU, set the OFF/NAV/ATT selector switch of the ADIRU1
and ADIRU3 to NAV to get the ND display.
(4) On the panel 8VU, make sure that the ATT HDG selector switch is at
NORM.
(5) On the FCU, on the CAPT and F/O EFIS control sections :
- set the mode selector switches to ROSE NAV or ARC.
Subtask 34-41-00-860-050-E
(2) Do the EIS start procedure (EFIS only) (Ref. TASK 31-60-00-860-001).
(3) On the ADIRS CDU, set the OFF/NAV/ATT selector switch of the ADIRU1
and ADIRU3 to NAV to get the ND display.
(4) On the panel 8VU, make sure that the ATT HDG selector switch is at
NORM.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-402,
34-41-00
Page 526
Nov 01/08
TAI
(5) On the FCU, on the CAPT and F/O EFIS control sections :
- set the mode selector switches to ROSE NAV or ARC.
Subtask 34-41-00-860-050-F
(2) Do the EIS start procedure (EFIS only) (Ref. TASK 31-60-00-860-001).
(3) On the ADIRS CDU, set the OFF/NAV/ATT selector switch of the ADIRU1
and ADIRU3 to NAV to get the ND display.
(4) On the panel 8VU, make sure that the ATT HDG selector switch is at
NORM.
(5) On the FCU, on the CAPT and F/O EFIS control sections :
- set the mode selector switches to ROSE NAV or ARC.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-00
Page 527
Nov 01/08
TAI
**ON A/C ALL
Subtask 34-41-00-865-054
D. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
4. Procedure
_________
Subtask 34-41-00-730-050-B
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the SYS 1/OFF/INOP selector The CAPT and F/O NDs show the radar
switch to 1. display.
- set the ATT HDG selector switch On the CAPT and F/O NDs, the radar
to CAPT 3. display stays in view.
- set the OFF/NAV/ATT selector On the CAPT and F/O NDs, the radar
switch of the ADIRU 1 to OFF. display stays in view.
R
EFF :
ALL 34-41-00
Page 528
May 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
5. On the center pedestal, on the On the CAPT and F/O NDs :
radar control unit : - after some seconds, the radar display
- set the SYS 1/OFF/INOP selector and the WR ATT warning indication go
switch to OFF. out of view.
Subtask 34-41-00-730-050-E
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the 1/OFF/2 system selector The CAPT and F/O NDs show the radar
switch to 1 (2). display.
- set the ATT HDG selector switch On the CAPT and F/O NDs, the radar
to CAPT 3. display stays in view.
- set the OFF/NAV/ATT selector On the CAPT and F/O NDs, the radar
switch of the ADIRU 1 to OFF. display stays in view.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-41-00
Page 529
Nov 01/08
TAI
**ON A/C ALL
Subtask 34-41-00-730-051-A
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On one MCDU :
- get the SYSTEM REPORT/TEST NAV
menu page
(Ref. TASK 31-32-00-860-010)
- push the line key adjacent to During the test sequence, make sure
the RADAR 1 indication. that the antenna :
- push the line key adjacent to - turns in elevation (+ 15⁰, - 15⁰)
the TEST indication. - turns in azimuth from the right side
to the left side, then becomes stable
at 0⁰, vertical to the aircraft
centerline.
At the end of the test, on the MCDU,
the TEST OK indication comes into
view.
On the CAPT and F/O NDs, ignore the
radar indications.
5. Close-up
________
Subtask 34-41-00-860-051
(1) On the panels 301VU and 500VU, set the PFD and ND potentiometers to
OFF.
(2) On the panel 8VU, set the ATT HDG selector switch to NORM.
(3) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-41-00
Page 530
May 01/08
R
TAI
(4) De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
Subtask 34-41-00-410-050
B. Close Access
EFF :
ALL 34-41-00
Page 531
May 01/08
TAI
ANTENNA ASSEMBLY - WEATHER RADAR (7SQ,11SQ) - REMOVAL/INSTALLATION
__________________________________________________________________
TASK 34-41-11-000-004
CAUTION : DO NOT USE THE LOCALIZER ANTENNA AT THE BOTTOM OF THE RADOME AS A
_______
SUPPORT.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-41-11
Page 401
Config-2 Nov 01/03
TAI
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-41-11-865-059
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
Subtask 34-41-11-010-053
B. Get Access
(1) In the cockpit, put a warning notice on the center pedestal, to tell
persons not to operate the weather radar system.
(2) Put the access platform in position in zone 110 below the radome.
EFF :
ALL 34-41-11
Page 402
Config-2 Nov 01/08
TAI
4. Procedure
_________
NOTE : If you send the antenna drive to the repair shop, also send its
____
plate.
Subtask 34-41-11-020-056
NOTE : During the removal of the antenna, one person must hold the
____
antenna.
(2) Remove the antenna (1) and put the antenna in a plastic bag and a
correct container.
Subtask 34-41-11-020-057
(2) Disconnect the wave guide (5) from the antenna drive (2) with the
quick disconnect clamp (3) and remove the O-ring (4).
(3) Put blanking caps on the disconnected connectors (12) and (13) and
the flange of the wave guide (5).
(4) Remove the two screws (11) and the washers (10) at the bottom.
(5) Loosen the two screws (8) and the washers (7) at the top. Do not
remove them.
(6) Lift the antenna drive (2) until the holes (6) are at the same level
as the two top screws (8), then pull carefully.
EFF :
ALL 34-41-11
Page 403
Config-2 Nov 01/08
TAI
Radar Antenna
Figure 401/TASK 34-41-11-991-001
R
EFF :
001-050, 053-099, 201-203, 34-41-11
Page 404
Config-2 Nov 01/07
TAI
Radar Antenna
Figure 401A/TASK 34-41-11-991-001-A
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-11
Page 405
Config-2 Nov 01/08
TAI
(7) Remove the antenna drive (2) and put it in a plastic bag and a
correct container.
EFF :
ALL 34-41-11
Page 406
Config-2 Nov 01/03
TAI
TASK 34-41-11-400-005
CAUTION : DO NOT USE THE LOCALIZER ANTENNA AT THE BOTTOM OF THE RADOME AS A
_______
SUPPORT.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
EFF :
ALL 34-41-11
Page 407
Config-2 Nov 01/03
TAI
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-41-11-860-051
(1) Make sure that the warning notice, which tells persons not to operate
the Weather Radar System, is in position in the cockpit on the center
pedestal.
(2) Make sure that the access platform is in position in zone 110 below
the radome.
(3) Make sure that the radome 110AL is open (Ref. TASK 53-15-11-010-001).
Subtask 34-41-11-865-060
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
EFF :
ALL 34-41-11
Page 408
Config-2 Nov 01/08
TAI
4. Procedure
_________
Subtask 34-41-11-420-056
NOTE : Do not remove the transparent plastic windows that are installed:
____
- at the inlet of the antenna drive, and
- at the interface between the antenna drive, and the antenna
plate.
(3) Make sure that the two top screws (8) are sufficiently loose.
(4) Lift the antenna drive (2) up to its support (9) and engage it in the
two top screws (8).
(5) Install the two bottom screws (11) and the washers (10).
(6) Attach the antenna drive (2). To do this, tighten the screws (8) and
(11) with the washers (7) and (10).
(7) Remove the blanking caps from the electrical connectors (12) and
(13), and from the flange of the wave guide (5).
(8) Put the O-ring (4) in the correct position on the wave guide (3).
(9) Connect the wave guide (5) to the antenna drive (2) with the quick
disconnect of the wave guide (3).
EFF :
ALL 34-41-11
Page 409
Config-2 Nov 01/08
TAI
Subtask 34-41-11-420-057
(1) Put the dowels (16) in the holes (18) of the antenna (1). Then engage
the plate (19) between the two slots (17). Tighten the two bolts
(15).
(2) Safety the two bolts (15) with lockwire corrosion resistant steel
0.8mm (0.30 in.).
(3) Make sure that the antenna assembly turns correctly in azimuth (AZ)
and in elevation (EL).
Subtask 34-41-11-865-061
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5SQ1
Subtask 34-41-11-730-053
D. Do the system test of the weather radar system (para. Antenna control)
(Ref. TASK 34-41-00-730-001).
5. Close-up
________
Subtask 34-41-11-410-053
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-41-11
Page 410
Config-2 Nov 01/03
TAI
CONTROL UNIT - WEATHER RADAR (3SQ) - REMOVAL/INSTALLATION
_________________________________________________________
TASK 34-41-12-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-41-12
Page 401
Nov 01/08
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-41-12-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
4. Procedure
_________
Subtask 34-41-12-020-051
(2) Pull the weather radar control unit (2) from its housing (5).
(3) Disconnect the electrical connector(s) (4) and hold it them away from
the panel.
(5) Put blanking caps on the disconnected electrical connectors (3) and
(4).
EFF :
ALL 34-41-12
Page 402
Nov 01/08
TAI
Weather Radar Control Unit
Figure 401/TASK 34-41-12-991-001-A
R
EFF :
001-050, 053-099, 34-41-12
Page 403
May 01/04
TAI
Weather Radar Control Unit
Figure 401A/TASK 34-41-12-991-001-B
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-41-12
Page 404
Nov 01/08
TAI
TASK 34-41-12-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-41-12-865-051
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
EFF :
ALL 34-41-12
Page 405
Nov 01/08
TAI
4. Procedure
_________
Subtask 34-41-12-420-051
(3) Remove the blanking caps from the electrical connectors (3) and (4).
(4) Make sure that the electrical connectors are clean and in the correct
condition.
(5) Connect the electrical connector(s) (4) to the weather radar control
unit (2).
(6) Install the weather radar control unit (2) in its housing (5).
Subtask 34-41-12-420-051-A
EFF :
ALL 34-41-12
Page 406
Nov 01/08
TAI
R (3) Remove the blanking caps from the electrical connectors (3) and (4).
R (4) Make sure that the electrical connectors are clean and in the correct
R condition.
R (5) Connect the electrical connector(s) (4) to the weather radar control
R unit (2).
R (6) Install the weather radar control unit (2) in its housing (5).
Subtask 34-41-12-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5SQ1
Subtask 34-41-12-740-050
5. Close-up
________
Subtask 34-41-12-860-050
A. Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-41-12
Page 407
Aug 01/08
TAI
TRANSCEIVER - WEATHER RADAR (1SQ1,1SQ2) - REMOVAL/INSTALLATION
______________________________________________________________
TASK 34-41-33-000-004
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
R Subtask 34-41-33-810-050
R (1) If required and applicable, print the Trouble Shooting Data (TSD) as
R follows:
R (a) Get access to the SYSTEM/REPORT TEST NAV page (Ref. TASK 31-32-
R 00-860-010).
EFF :
ALL 34-41-33
Page 401
Aug 01/01
TAI
R (d) Print the Trouble Shooting Data (TSD).
Subtask 34-41-33-865-058
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
Subtask 34-41-33-010-052
R C. Get Access
(1) Put the access platform in position at the access door 811 in zone
122.
4. Procedure
_________
Subtask 34-41-33-020-050
(3) Pull the weather radar transceiver (2) on its rack (1) to disconnect
the electrical connectors (4) and (6).
(4) Remove the weather radar transceiver (2) from its rack (1).
(5) Put blanking caps on the disconnected electrical connectors (4) and
(6).
EFF :
ALL 34-41-33
Page 402
Aug 01/01
TAI
Weather Radar Transceiver
Figure 401/TASK 34-41-33-991-003
EFF :
ALL 34-41-33
Page 403
Feb 01/96
TAI
TASK 34-41-33-400-003
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-41-33-860-050
(1) Make sure that the access platform is in position at the access door
811 in zone 122.
EFF :
ALL 34-41-33
Page 404
May 01/98
R
TAI
Subtask 34-41-33-865-059
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R
121VU COM NAV/RADAR/1 5SQ1 K13
4. Procedure
_________
Subtask 34-41-33-420-050
(3) Remove the blanking caps from the electrical connectors (4) and (6).
(4) Make sure that the electrical connectors are clean and in the correct
condition.
(5) Install the weather radar transceiver (2) on its rack (1).
(6) Push the weather radar transceiver (2) on its rack (1) to connect the
electrical connectors (4) and (6).
(7) Engage the nuts (5) on the lugs (3) and tighten.
Subtask 34-41-33-865-060
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5SQ1
Subtask 34-41-33-740-050
EFF :
ALL 34-41-33
Page 405
Aug 01/98
TAI
5. Close-up
________
Subtask 34-41-33-860-051
A. Make sure that the work area is clean and clear of tool(s) and other
items.
Subtask 34-41-33-410-050
B. Close Access
EFF :
ALL 34-41-33
Page 406
Aug 01/98
R
TAI
MOUNTING TRAY - WEATHER RADAR TRANSCEIVER (9SQ) - REMOVAL/INSTALLATION
______________________________________________________________________
TASK 34-41-37-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-41-37-020-050
EFF :
ALL 34-41-37
Page 401
Nov 01/08
TAI
4. Procedure
_________
Subtask 34-41-37-020-052
(5) Cut and remove the lockwire from the screws (10).
(6) Remove the four screws (10) and the washers (11).
(7) Remove the wave guide (12) from its support. Remove the window (13)
and the O-rings (14).
(8) Remove the ten screws (6), the washers (5) and the attachment plates
(4).
(10) Put blanking caps on the disconnected electrical connectors (1), (3)
and (9).
(11) Remove the eight screws (22) and the washers (23).
EFF :
ALL 34-41-37
Page 402
Nov 01/08
TAI
Weather Radar Transceiver Mounting Tray
Figure 401/TASK 34-41-37-991-001
R
EFF :
001-050, 053-099, 201-203, 34-41-37
Page 403
Nov 01/07
TAI
Weather Radar Transceiver Mounting Tray
Figure 401A/TASK 34-41-37-991-001-A
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-41-37
Page 404
Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
Subtask 34-41-37-020-052-A
(5) Cut and remove the lockwire from the screws (10).
(6) Remove the four screws (10) and the washers (11).
(7) Remove the wave guide (12) from its support. Remove the window (13)
and the O-rings (14).
(8) Remove the twenty screws (6), the washers (5) and the attachment
plates (4).
(10) Put blanking caps on the disconnected electrical connectors (1), (3)
and (9).
(11) Remove the eight screws (22) and the washers (23).
Subtask 34-41-37-020-051
(1) Remove the eight screws (15) and the eight washers (16).
(2) Hold the wave guide switch (17) and remove the four screws (18) and
the eight washers (19).
(3) Disengage the wave guide switch (17) from its support (20).
EFF :
ALL 34-41-37
Page 405
Nov 01/08
TAI
TASK 34-41-37-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-41-37
Page 406
Nov 01/08
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-41-37-860-050
(1) Make sure that the access platform is in position at the access door
811 in zone 122.
4. Procedure
_________
Subtask 34-41-37-420-050
(3) Precaution:
If you install a new Mounting tray, make sure that you removed the
attachment plates (4).
(4) Clean and inspect the wave guide switch (17) interface and the
adjacent area.
(5) Install the wave guide switch (17) on its support (20).
(6) Install the four screws (18) and the eight washers (19). Do not
tighten.
(7) Install the eight screws (15) and the eight washers (16) and tighten.
EFF :
ALL 34-41-37
Page 407
Nov 01/00
R
TAI
R **ON A/C 001-050, 053-099, 201-203,
Subtask 34-41-37-420-052
(1) Install the Mounting tray (21) in its housing (2) with the eight
washers (23) and the screws (22).
(2) Remove the blanking caps from the disconnected electrical connectors
(1), (3) and (9).
(3) Make sure that the electrical connectors are clean and in the correct
condition.
(5) Install the attachment plates (4) and attach them with the ten
washers (5) and the screws (6).
(7) Put the window (13) and the wave guide (12) in position.
(8) Install the four washers (11) and the screws (10).
(9) Tighten the screws (10) and safety them with the lockwire.
(10) Remove the blanking plugs from the disconnected line ends (8).
(11) Connect the ventilation lines (8). Tighten the clamps (7).
(13) Make sure that the electrical connectors are clean and in the correct
condition.
R
EFF :
001-050, 053-099, 201-203, 34-41-37
Page 408
Nov 01/07
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
Subtask 34-41-37-420-052-A
(1) Install the Mounting tray (21) in its housing (2) with the eight
washers (23) and the screws (22).
(2) Remove the blanking caps from the disconnected electrical connectors
(1), (3) and (9).
(3) Make sure that the electrical connectors are clean and in the correct
condition.
(5) Install the attachment plates (4) and attach them with the twenty
washers (5) and the screws (6).
(7) Put the window (13) and the wave guide (12) in position.
(8) Install the four washers (11) and the screws (10).
(9) Tighten the screws (10) and safety them with the lockwire.
(10) Remove the blanking plugs from the disconnected line ends (8).
(11) Connect the ventilation line (8). Tighten the clamps (7).
(13) Make sure that the electrical connectors are clean and in the correct
condition.
5. Close-up
________
EFF :
ALL 34-41-37
Page 409
Nov 01/08
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
Subtask 34-41-37-420-051
EFF :
ALL 34-41-37
Page 410
Nov 01/08
TAI
WAVE GUIDE ASSEMBLY (301FM) - REMOVAL/INSTALLATION
__________________________________________________
TASK 34-41-41-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-41-41-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R
121VU COM NAV/RADAR/1 5SQ1 K13
EFF :
ALL 34-41-41
Page 401
Aug 01/98
TAI
R
Subtask 34-41-41-010-050
B. Get Access
(1) In the cockpit, put a warning notice on the center pedestal to tell
persons not to operate the weather radar.
(4) Put the access platform in position at the access door 811.
4. Procedure
_________
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR
_______
ARE OPENED, SAFETIED AND TAGGED.
Subtask 34-41-41-020-050
A. Removal of the Flexible Wave Guide Part (10) Connected to the Mounting
Tray of the Weather Radar Transceiver
(1) Remove the lockwire and then the four screws (18) and the four
washers (17).
(2) Disconnect the flange (11). Remove and discard the two O-rings (13)
and (16) and the adaptor (12).
(3) At the other end, remove the lockwire and then the four screws (5)
and washers (6).
EFF :
ALL 34-41-41
Page 402
Aug 01/98
TAI
Wave Guide Assembly
Figure 401/TASK 34-41-41-991-001
EFF :
ALL 34-41-41
Page 403
Feb 01/96
TAI
Subtask 34-41-41-020-051
B. Removal of the Rigid Wave Guide Part (14) Installed in the Avionics
Compartment
(1) Remove the lockwire and then the four screws (5) and the four washers
(6).
(2) Disconnect the flange (9). Remove and discard the O-ring (8).
(3) At the wave guide feedthrough (25), remove the lockwire and then the
four screws (36) and the four washers (35).
(4) Hold the wave guide part (14) and remove the screw (21) and the
washer (20) which attach the clamp (19) to the structure.
(5) Move the rigid wave guide part (14) away from the structure. Remove
and discard the O-ring (24).
(6) Remove the clamp (19) and the two half bushings (22) from the wave
guide.
Subtask 34-41-41-020-052
NOTE : Two persons are necessary to remove the wave guide feedthrough.
____
(1) If necessary, remove the two rigid wave guide parts (14) and (37)
which are connected to the feedthrough. Refer to Para. B. above and
Para. D. below.
(2) Remove the eight screws (34), the washers (33) and the nuts (32).
(3) Move the wave guide feedthrough (25) away from the pressure bulkhead
(27). Remove and discard the packing (26).
(4) Remove the wave guide feedthrough (25) and put blanking caps on the
disconnected ends.
EFF :
ALL 34-41-41
Page 404
Feb 01/96
TAI
Subtask 34-41-41-020-053
D. Removal of the Rigid Wave Guide Part (37) Installed in the Radome
(1) Remove the lockwire and then the four screws (38) and the washers
(39).
(2) Disconnect the flange (2). Remove and discard the O-ring (3).
(3) At the wave guide feedthrough (25), remove the lockwire and then the
four screws (30) and the four washers (31).
(4) Hold the wave guide part (37) and remove the screw (21) and the
washer (20) which attach the clamp (19) to the structure.
(5) Move the rigid wave guide part (37) away from the structure. Remove
and discard the O-ring (28).
(6) Remove the clamp (19) and the two half bushings (22) from the wave
guide.
(7) Remove the rigid wave guide part (37) and put blanking caps on the
disconnected ends.
Subtask 34-41-41-020-054
E. Removal of the Flexible Wave Guide Part (1) Connected to the Antenna
Drive
(3) At the other end, remove the lockwire and then the four screws (38)
and the four washers (39).
(5) Remove the flexible wave guide part (1) and put blanking caps on the
disconnected ends.
EFF :
ALL 34-41-41
Page 405
Feb 01/96
TAI
TASK 34-41-41-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
EFF :
ALL 34-41-41
Page 406
May 01/05
TAI
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-41-41-860-050
(1) Make sure that the access platform is in position and that the radome
110AL is open.
(2) Make sure that the access platform is in position at the access door
811 and that the access door 811 is open.
(3) In the cockpit make sure that there is a warning notice on the center
pedestal to tell persons not to operate the weather radar.
NOTE : Remove the blanking caps before you install parts of the wave
____
guide. Make sure that all mating surfaces are clean and in
correct condition.
Subtask 34-41-41-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R
121VU COM NAV/RADAR/1 5SQ1 K13
EFF :
ALL 34-41-41
Page 407
Aug 01/98
TAI
R
4. Procedure
_________
Subtask 34-41-41-420-050
A. Installation of the Flexible Wave Guide Part (1) Connected to the Antenna
Drive
(1) Install a new O-ring (41) and put the flange (ANT reference) in
position.
(3) At the other end, install a new O-ring (3) and connect the flanges
(2) and (4).
(4) Install the four washers (39) and the four screws (38).
TORQUE the screws to between 0.19 and 0.21 m.daN (16.81 and 18.58
lbf.in) and install the corrosion resistant steel lockwire dia. 0.5
mm (0.020 in.).
(5) Install the two half bushings (22) and the clamp (19) on the wave
guide.
Put the clamp in position and install the washer (20) and the screw
(21).
Subtask 34-41-41-420-051
(1) If necessary, install the wave guide feedthrough (25). Refer to Para.
C. below.
(2) At the two ends, install new O-rings (3) and (28).
EFF :
ALL 34-41-41
Page 408
Aug 01/98
TAI
(3) Hold the rigid wave guide part (37) in position: install the eight
washers (31) and (39) and the eight screws (30) and (38).
(5) Install the two half bushings (22) and the clamp (19) on the wave
guide. Put the clamp in position and install the washer (20) and the
screw (21).
Subtask 34-41-41-420-052
NOTE : Two persons are necessary to install the wave guide feedthrough.
____
(1) Install a new packing (26) and put the feedthrough (25) into the
cutout of the pressure bulkhead (27).
(2) Install the eight screws (34), the washers (33) and the nuts (32).
R TORQUE the nuts to between 0.19 and 0.21 m.daN (16.81 and 18.58
R lbf.in). Seal the nuts with SEALANTS (Material No. 09-016).
(3) If necessary, install the rigid wave guide parts (14) and (37) which
are connected to the feedthrough. Refer to Para. B. above and to
Para. D. below.
Subtask 34-41-41-420-053
(1) If necessary, install the wave guide feedthrough (25). Refer to Para.
C. above.
(2) At the two ends, install new O-rings (24) and (8).
(3) Hold the rigid wave guide part (14) in position and install eight
washers (35) and (6) and eight screws (36) and (5).
R (4) TORQUE the screws to between 0.19 and 0.21 m.daN (16.81 and 18.58
R lbf.in) and install the lockwire.
(5) Install the two half bushings (22) and the clamp (19) on the wave
guide. Put the clamp in position and install the washer (20) and the
screw (21).
EFF :
ALL 34-41-41
Page 409
May 01/96
TAI
Subtask 34-41-41-420-054
(1) Install a new O-ring (8) and connect the flange (9) to the flange
(7).
(2) Install the four washers (6) and the four screws (5). TORQUE the
screws to between 0.19 and 0.21 m.daN (16.81 and 18.58 lbf.in) and
install the lockwire.
(3) On the flange of the mounting tray (15), install a new O-ring (13).
(4) On the flange (11) (RT reference), install a new O-ring (16).
(5) Put the adaptor (12) in position with the arrow which points in the
direction of the mounting tray.
(6) Install the flange (11) with the four washers (17) and the four
screws (18). TORQUE the screws to between 0.19 and 0.21 m.daN (16.81
and 18.58 lbf.in) and install the lockwire.
(7) Make sure that the pressurization hole in the wave guide is clean.
Subtask 34-41-41-865-052
F. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
5SQ1
Subtask 34-41-41-710-050
G. Test
(1) Make sure that all wave guide parts are correctly installed.
EFF :
ALL 34-41-41
Page 410
May 01/07
TAI
(3) Do the EIS start procedure (ND only) (Ref. TASK 31-60-00-860-001).
(5) On the center pedestal, on the weather radar control unit, set the
system to ON.
(6) Make sure that the system operates normally: on the ND, the weather
radar display is shown.
(7) On the weather radar control unit, set the system to OFF.
5. Close-up
________
Subtask 34-41-41-860-052
(2) On the ADIRS CDU set the OFF/NAV/ATT selector switches to OFF.
(3) Make sure that the work area is clean and clear of tool(s) and other
items.
Subtask 34-41-41-410-050
B. Close Access
EFF :
ALL 34-41-41
Page 411
Feb 01/96
TAI
RADIO ALTIMETER - DESCRIPTION AND OPERATION
___________________________________________
1. General
_______
The LRA-700 provides vertical distance to the terrain via the ARINC 429 bus
outputs. The RA transmit a FM/CW (Frequency Modulated Continuous Wave) RF
signal to the terrain, via the transmit antenna, and receives the reflection
of that signal via the receive antenna. It independently computes an
altitude by measuring and processing the characteristics of the transmitted
and received RF signal.
The LRA-900 provides vertical distance to the terrain via the ARINC 429 bus
outputs. The RA transmit a FM/CW (Frequency Modulated Continuous Wave) RF
signal to the terrain, via the transmit antenna, and receives the reflection
of that signal via the receive antenna. It independently computes an
altitude by measuring and processing the characteristics of the transmitted
and received RF signal.
2. __________________
Component Location
EFF :
ALL 34-42-00
Page 1
Nov 01/08
TAI
Radio Altimeter - Component Location
Figure 001
R
EFF :
001-050, 053-099, 201-203, 34-42-00
Page 2
Nov 01/07
TAI
Radio Altimeter - Component Location
Figure 001A
R
EFF :
211-212, 215-215, 218-299, 34-42-00
Page 3
Nov 01/08
TAI
R Radio Altimeter - Component Location
R Figure 001B
R
EFF :
301-399, 34-42-00
Page 4
Feb 01/99
TAI
**ON A/C 401-499,
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
2SA1 XCVR-RA, 1 152 826 34-42-33
2SA2 XCVR-RA, 2 152 826 34-42-33
3SA1 FAN-RA XCVR 1 152 826 34-42-45
3SA2 FAN-RA XCVR 2 152 826 34-42-45
5SA1 ANTENNA-RA RCPTN, 1 153 34-42-11
5SA2 ANTENNA-RA RCPTN, 2 153 34-42-11
6SA1 ANTENNA-RA XMSN, 1 153 34-42-11
6SA2 ANTENNA-RA XMSN, 2 153 34-42-11
3. __________________
System Description
A. Principle
The principle of the radio altimeter is to :
- transmit a frequency modulated signal from the aircraft to the ground
- receive the ground reflected signal after a certain delay.
The time between the transmitted frequency and the received frequency is
proportional to the aircraft height.
B. System Architecture
EFF :
ALL 34-42-00
Page 5
Nov 01/07
TAI
R Radio Altimeter - Component Location
R Figure 001C
R
EFF :
401-499, 34-42-00
Page 6
May 01/05
TAI
Radio Altimeter - Block Diagram
Figure 002
R
EFF :
053-099, 34-42-00
Page 7
May 01/05
TAI
Radio Altimeter - Block Diagram
Figure 002A
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 8
Nov 01/08
TAI
Radio Altimeter - Block Diagram
Figure 002B
R
EFF :
001-050, 053-099, 201-203, 34-42-00
Page 9
Nov 01/07
TAI
R **ON A/C 001-050, 053-099, 201-203,
R
EFF :
001-050, 053-099, 201-203, 34-42-00
Page 10
Nov 01/07
TAI
Radio Altimeter - Control and Indicating
Figure 003
EFF :
ALL 34-42-00
Page 11
May 01/05
R
TAI
Radio Altimeter - Data and Warning Displays
Figure 004
R
EFF :
ALL 34-42-00
Page 12
May 01/05
TAI
The distance between these two lines is proportional to the ground
height (sensitivity 5 ft./mm).
As it moves up, the limit line erases the graduations on the pitch
scale.
With failure of both radio altimeters, this indication goes out of
view.
D. Warnings
(Ref. Fig. 003, 004)
The warnings related to the radio altimeter are :
- local warning on the instruments that use the radio altimeter data
- MASTER CAUT lights on the CAPT and F/O glareshield panels
- aural warning : single chime
- warning message shown on the upper ECAM display unit.
A. Principle
(Ref. Fig. 005, 006A)
The principle of the radio altimeter is to :
- transmit a frequency modulated signal from the aircraft to the ground
- receive the ground reflected signal after a certain delay.
The time between the transmitted frequency and the received frequency is
proportional to the aircraft height.
the height of the aircraft is calculated by determining the difference
between the frequency of the reflected signal and the signal being
transmitted at the instant the reflected signal is received. This
difference frequency is directly proportional to the time required for
the reflected signal to traverse the distance from the aircraft to the
ground and back to the aircraft. The difference frequency is measured and
converted to distance by a microprocessor in the altitude processor which
also transmits the measured distance to user equipment over the ARINC 429
bus.
The reflected signal is fed from a dedicated receive antenna to the
receiver where it is mixed with a portion of the transmitted signal now
being radiated at the transmit antenna to develop a beat frequency (Fb).
The beat frequency is processed by the IF system and is sent to the
altitude and monitor processors.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-42-00
Page 13
Nov 01/08
TAI
Radio Altimeter - Principle of Operation
Figure 005
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 14
Nov 01/08
TAI
Radio Altimeter - Simplified Block Diagram
Figure 006
R
EFF :
001-050, 053-099, 201-203, 34-42-00
Page 15/16
Nov 01/07
TAI
Radio Altimeter - Simplified Block Diagram
Figure 006A
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 17/18
Nov 01/08
TAI
Two independent samples of transmitted RF are fed to two reference signal
generators. Each generator produces an output (Fr) corresponding to the
delay time that represents a 300-foot altitude. Fr1 is the reference
signal for the altitude processor, Fr2 is the reference signal for the
monitor processor.
The altitude processor samples the beat frequency input signal (Fb) and
the reference frequency signal (Fr1) and converts each to digital form.
The ratio of the measured frequency input signal (Fb) to the output of
the 300-foot reference channel is calculated and multiplied by 300 to
produce the total radio altitude. The total radio altitude is further
modified by the AID and internal box delays to produce the actual
aircraft altitude above terrain.
B. System Architecture
(Ref. Fig. 002A)
The radio altimeter comprises two independent systems. Each system
consists of :
- one transceiver 2SA1 (2SA2)
- one transmission antenna 6SA1 (6SA2)
- one reception antenna 5SA1 (5SA2)
- one fan 3SA1 (3SA2).
In addition, the Centralized Fault-Display Interface-Unit (CFDIU) 1TW
controls the system through the Multipurpose Control and Display Unit 1
(2) (MCDU) 3CA1 (3CA2) for test causes.
(Ref. Fig. 003)
The radio height data is shown on the Primary Flight Display (PFD). In
normal operation, system 1 provides information to the CAPT PFD and
system 2 to the F/O PFD.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 19
Nov 01/08
TAI
extented configuration only. The message flashes during 3 seconds
then remains on.
When the aircraft is below 500 ft. height above the terrain : a red
ribbon comes into view on the bottom of the altitude scale and moves
up with this scale as the aircraft is in the descent phase (Item 2).
When the aircraft has touched down the ground : the top of this
ribbon is at the middle of the altitude window.
With failure of both radio altimeters, the ribbon goes out of view.
Below 300 ft., the height is shown by the distance between the
horizon line and the limit of the sector 2. The limit of the sector 2
moves up as the aircraft is in the descent phase.
The distance between these two lines is proportional to the ground
height (sensitivity 5 ft./mm).
As it moves up, the limit line erases the graduations on the pitch
scale.
With failure of both radio altimeters, this indication goes out of
view.
D. Warnings
(Ref. Fig. 003, 004)
The warnings related to the radio altimeter are :
- local warning on the instruments that use the radio altimeter data
- MASTER CAUT lights on the CAPT and F/O glareshield panels
- aural warning : single chime
- warning message shown on the upper ECAM display unit.
4. ____________
Power Supply
EFF :
ALL 34-42-00
Page 20
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203,
5. _____________________
Component Description
A. Transceiver
(a) Layout
The transceiver LRA-700 consists of a power supply, a modulator,
an rf assembly and an instrumentation assembly (processor) along
with the necessary interconnect functions.
The transceiver is a radio altimeter using a wideband frequency
modulated continuous wave (FM/CW) technique to measure the
distance between the aircraft and the terrain below.
EFF :
ALL 34-42-00
Page 21
Nov 01/07
TAI
Radio Altimeter - Transceiver
Figure 007
R
EFF :
001-050, 053-099, 201-203, 34-42-00
Page 22
Nov 01/07
TAI
The function of the modulator is to provide the transmitter with
a 100 Hz triangular wave corrected for transmitter nonlinearities
and also to maintain the transmitter deviation limits at 4250 MHz
and 4350 MHz.
The modulator assembly also contains the high and low altitude
ifs, and two major closed loop circuits.
The first control loop controls the rate at which the transmitter
output frequency changes.
The other major control loop defines and contains the transmitted
frequency within the 4250 to 4350 MHz normal band of operation.
The rf assembly contains all of the 4300 MHz functions. It is
comprised of the transmitter stripline, receiver stripline and
discriminator assemblies.
The instrumentation assembly consists of the altitude processor,
the monitor processor and the power supply.
(b) Processing
The beat and reference frequencies from the if circuit board are
converted to a binary number in the counter array and the
microprocessor calculates the radio altitude based on the counter
array data.
The altitude information is converted to ARINC 429 ternary data
by being formatted and sent by the UART through the driver
circuits to the FMGCs and PFDs once every 30 or 40 milliseconds
depending on aircraft altitude.
(c) Monitoring
The monitor processor counts and computes altitude, in the same
manner as the altitude processor. Instead of transmitting ternary
data, however, the monitor processor receives it and compares it
with its own previously computed altitude. Any altitude disparity
(outside of a fixed error window determined by software)
generates a failure indication.
An incorrect word or altitude also causes the monitor processor
to inhibit transmission of this data to the autopilot if the
optional AFS interrupt mode is selected.
This is accomplished by disabling the AFS power supply during
periods of incorrect data transmission and thereby shutting down
the ALT bus No.1 ARINC 429 transmitter.
R
EFF :
001-050, 053-099, 201-203, 34-42-00
Page 23
Nov 01/07
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
(a) Layout
The transceiver LRA-900 consists of an interconnect assembly, an
RF assembly, a modulator/IF assembly, an instrumentation assembly
(processor) and a power supply assembly.
The transceiver is a radio altimeter using a wideband frequency
modulated continuous wave (FM/CW) technique to measure the
distance between the aircraft and the terrain below.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 24
Nov 01/08
TAI
Radio Altimeter - Transceiver
Figure 007A
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 25
Nov 01/08
TAI
1
_ Altitude processor
The beat and reference frequencies from the IF circuit board
are converted to a binary number in the counter array and the
microprocessor calculates the radio altitude based on the
counter array data.
The altitude information is converted to ARINC 429 ternary
data by being formatted and sent by the UART through the
driver circuits to the FMGCs and PFDs once every 35 or 40
milliseconds depending on aircraft altitude.
2
_ Monitor processor
The monitor processor counts and computes altitude, in the
same manner as the altitude processor. Instead of transmitting
ternary data, however, the monitor processor receives it and
compares it with its own previously computed altitude. Any
altitude disparity (outside of a fixed error window determined
by software) generates a failure indication.
An incorrect word or altitude also causes the monitor
processor to inhibit transmission of this data to the
autopilot if the optional AFCS interrupt mode is selected.
This is accomplished by disabling the AFCS power supply during
periods of incorrect data transmission and thereby shutting
down the ALT bus No.1 ARINC 429 transmitter.
(d) RF assembly
The RF assembly contains all of the 4300 MHz functions. It is
comprised of the transmitter and receiver microstrip circuitry.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-42-00
Page 26
Nov 01/08
TAI
BNR: binary data word
BCD: binary coded decimal data word
ISO: data word coded in ISO5 code
DIS: discrete data word
HEX: hexadecimal coded
HYB: mixed code
- ALPHA CODE: indicates the parameter mnemonic code
- SOURCE ORIGIN: parameter source computer or system.
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 164 |RADIO | 8192 | FT | 29 | 16 | 80 |BNR |RALT | |
| |HEIGHT | 0.125 | | | | | | | |
| | | | | | | | | | |
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-42-00
Page 27
Nov 01/08
TAI
HYB: mixed code
- ALPHA CODE: indicates the parameter mnemonic code
- SOURCE ORIGIN: parameter source computer or system.
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 164 |RADIO | 8192 | FT | 29 | 16 | 35 |BNR |RALT | |
| |HEIGHT | 0.125 | | | | or | | | |
| | | | | | | 40 | | | |
-------------------------------------------------------------------------------
B. Antennas
EFF :
ALL 34-42-00
Page 28
Nov 01/08
TAI
Radio Altimeter - Antennas
Figure 008
R
EFF :
001-050, 053-099, 201-203, 34-42-00
Page 29
Nov 01/07
TAI
Radio Altimeter - Antennas
Figure 008A
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 30
Nov 01/08
TAI
C. Fans
The six-blade fan is integral with a removable base plate attached under
the transceiver mount. It is contained in a square aluminum alloy case.
It is supplied with 115VAC through a connector and associated wiring
connecting it to the transceiver. Interference is suppressed by a
capacitor mounted on the fan case.
6. Operation
_________
A. Control
In normal operation, system 1 automatically provides the height data for
the CAPT PFD and system 2 for the F/O PFD.
With failure of one system, the valid system is automatically switched to
both CAPT and F/O PFDs.
With failure of the two systems, the digits go out of view from the PFD :
in place of the digits, a red RA warning message flashes during three
seconds then remains on.
For information : the pilot sets the DH on the MCDU. The Flight Warning
Computer (FWC) generates the DH warning message.
With loss of DH information, the DH data are not shown.
B. Reconfiguration Switching
In normal utilization, the radio altimeter data are shown on the CAPT PFD
and F/O PFD through the Display Management Computers 1 and 2 (DMC).
With failure of the radio altimeter transceiver 1, the DMC 1 and 2
automatically switch over to the transceiver 2.
With failure of the DMC 1 (2), it is possible to switch over to the DMC 3
with the EIS DMC selector switch.
This selector switch is located on panel 8VU on the center pedestal.
In this case the DMC 3 totally replaces the DMC 1 (2) through the stage
of the output switching relay of the failed DMC.
With failure of the PFD, there is an automatic transfer of the PFD image
onto the Navigation Display (ND).
When you set the PFD potentiometer to OFF on panel 301VU (500VU), this
causes :
- deactivation of the PFD
- transfer of the PFD image onto the ND.
7. Test
____
EFF :
ALL 34-42-00
Page 31
Nov 01/07
TAI
Radio Altimeter - Maintenance Test Procedure
Figure 009
R
EFF :
001-050, 053-099, 201-203, 34-42-00
Page 32
Nov 01/07
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
NOTE : The test can be performed on the ground only. It is inhibited (the
____
EIU1 (EIU2) sends a ground discrete to the RA1 (RA2)) as soon as
N2 rating (high pressure compressor rotational speed) is greater
than minimum idle rating.
Pre SB LRA-700-34-G
B. CURRENT STATUS
The RA CURRENT STATUS function can be activated by pressing the line key
adjacent to the corresponding indication on the LRA 1(2) maintenance
sub-menu. The current status gives the status of the RA before entering
menu mode. It print CURRENT STATUS OK when no fault is detected or print
the failure when fault is detected.
Post SB LRA-700-34-G
EFF :
ALL 34-42-00
Page 33
Nov 01/08
TAI
Radio Altimeter - Maintenance Test Procedure
Figure 009A (SHEET 1)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 34
Nov 01/08
TAI
Radio Altimeter - Maintenance Test Procedure
Figure 009A (SHEET 2)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 35
Nov 01/08
TAI
Radio Altimeter - Maintenance Test Procedure
Figure 009A (SHEET 3)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 36
Nov 01/08
TAI
Radio Altimeter - Maintenance Test Procedure
Figure 009A (SHEET 4)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 37
Nov 01/08
TAI
Radio Altimeter - Maintenance Test Procedure
Figure 009A (SHEET 5)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 38
Nov 01/08
TAI
- on the MCDU, at the end of the test, the TEST OK message comes into
view.
NOTE : The test can be performed on the ground only. It is inhibited (the
____
EIU1 (EIU2) sends a ground discrete to the RA1 (RA2)) as soon as
N2 rating (high pressure compressor rotational speed) is greater
than minimum idle rating.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-42-00
Page 39
Nov 01/08
TAI
(2) RAMP TEST
The RAMP TEST function can be activated from the MCDU by pressing the
line key adjacent to the SYSTEM REPORT/TEST indication on the CFDS
menu then selecting the RA1 (RA2) on the NAV menu and then selecting
the RAMP TEST page.
The RA then begins simulating a ramp starting from 500 ft. down to 0
ft. (with a slope of 11 ft/s from 500 ft. to 50 ft. and approximately
3 ft/s from 50 ft. to 0 ft.).
R
EFF :
ALL 34-42-00
Page 40
Nov 01/03
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
E. CFDIU Interface
(Ref. Fig. 009A)
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 41
Nov 01/08
TAI
Allows to display the P/N of the equipment.
- TROUBLE SHOOTING DATA
Provides correlation parameters and snapshot data concerning the
failure displayed in the LAST LEG REPORT and PREVIOUS LEGS
REPORT.
- GROUND REPORT.
Allows to present the class 1, 2 or 3 internal failures detected
on ground.
- SYSTEM TEST.
Allows a check of the correct operation of the RA transceiver on
the ground.
- RAMP TEST.
Allows to verify that auto call out altitudes are correctly
announced.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 42
Nov 01/08
TAI
RADIO ALTIMETER - ADJUSTMENT/TEST
_________________________________
TASK 34-42-00-740-002
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-42-00-860-054
(2) Do the EIS start procedure (PFDs only) (Ref. TASK 31-60-00-860-001).
R (4) On the center pedestral, on one MCDU, get the SYSTEM REPORT/TEST/NAV
page (Ref. TASK 31-32-00-860-010).
EFF :
ALL 34-42-00
Page 501
May 01/96
TAI
Subtask 34-42-00-865-056
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RAD ALTM/2 1SA2 K12
121VU COM NAV/RAD ALTM/1 1SA1 K11
4. Procedure
_________
Subtask 34-42-00-740-051
A. BITE Test
NOTE : - During the test, you can hear auto call out announcements 40 or
____
41 or 42.
- You must open the RA1 circuit breaker to hear auto call out
announcements during the RA2 SYSTEM TEST.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On the MCDU:
- get the LRA1 (LRA2) page then On the CAPT (F/O PFD):
push the line key adjacent to - the bottom sector line moves down
the SYSTEM TEST indication. from the horizon line.
- the radio altitude indication is 40
ft.
At the end of the test, on the MCDU,
the TEST OK message comes into view.
EFF :
ALL 34-42-00
Page 502
Nov 01/07
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
On the MCDU, the LRA1 (LRA2) page comes
into view.
Subtask 34-42-00-740-051-A
A. BITE Test
NOTE : - During the test, you can hear auto call out announcements 40.
____
- You must open the RA1 circuit breaker to hear auto call out
announcements during the RA2 SYSTEM TEST.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On the MCDU:
- get the RA1 (RA2) page then On the CAPT (F/O PFD):
push the line key adjacent to - the bottom sector line moves down
the SYSTEM TEST indication. from the horizon line.
- the radio altitude indication is 40
ft.
- push the line key adjacent to the TEST OK message comes into view.
the YES indication.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-42-00
Page 503
Nov 01/08
TAI
R **ON A/C ALL
5. Close-up
________
Subtask 34-42-00-860-055
(3) On the center pedestal, on the MCDU, push the line key adjacent to
the RETURN indication until the MCDU MENU page comes into view.
(5) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-42-00
Page 504
Feb 01/99
TAI
TASK 34-42-00-750-001
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-42-00
Page 505
Feb 01/03
TAI
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-42-00-860-056
Subtask 34-42-00-010-050
B. Get Access
(1) Put an access platform in position at the aft cargo door 826.
(2) Open the aft cargo door 826 (Ref. TASK 52-30-00-860-001).
Subtask 34-42-00-865-055
C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RAD ALTM/2 1SA2 K12
121VU COM NAV/RAD ALTM/1 1SA1 K11
4. Procedure
_________
Subtask 34-42-00-020-050
EFF :
ALL 34-42-00
Page 506
Feb 01/03
R
TAI
Subtask 34-42-00-210-051
(3) Lock the RA transceiver fans and their housings to prevent movement.
NOTE : When you clean the fan with the air blower, the fan can turn
____
too quickly and thus a fault can occur.
(4) Clean the RA transceiver fans and their housings with a soft brush
and/or an air blower.
Subtask 34-42-00-420-050
(1) Close the circuit breakers 1SA1 and 1SA2 on the panel 121VU.
Subtask 34-42-00-720-053
D. Functional Test
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1. On the rear circuit breaker panel In the aft cargo compartment (zone 152,
121VU: door 826), below the transceiver mount:
- open the circuit breaker 1SA1 - make sure that the RA transceiver fan
(1SA2). 3SA1 (3SA2) does not blow.
- close the circuit breaker 1SA1 - make sure that the RA transceiver fan
(1SA2). 3SA1 (3SA2) blows air up.
EFF :
ALL 34-42-00
Page 507
Nov 01/06
R
TAI
Subtask 34-42-00-740-052
NOTE : If the airline operates the aircraft in CAT III conditions, you
____
must also do the LAND CAT III capability test (Ref. TASK 22-97-00-
710-001).
5. Close-up
________
Subtask 34-42-00-410-050
A. Close Access
(2) Close the aft cargo door 826 (Ref. TASK 52-30-00-860-002).
Subtask 34-42-00-865-059
R -------------------------------------------------------------------------------
R PANEL DESIGNATION IDENT. LOCATION
R -------------------------------------------------------------------------------
R 121VU COM NAV/RAD ALTM/2 1SA2 K12
R 121VU COM NAV/RAD ALTM/1 1SA1 K11
Subtask 34-42-00-860-057
(2) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-42-00
Page 508
Nov 01/06
TAI
TASK 34-42-00-730-002
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific boomsets
No specific access platform 2 m (6 ft. 7 in.)
R DRA707B1 1 TEST SET-DIGITAL RADIO ALTIMETER
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-42-00-860-052
(1) Put the access platform in position at the AFT cargo door 826.
R (4) Connect the TEST SET-DIGITAL RADIO ALTIMETER (DRA707B1) to the face
of the transceiver.
EFF :
ALL 34-42-00
Page 509
Nov 01/07
TAI
(5) Do the EIS start procedure (PFDs only) (Ref. TASK 31-60-00-860-001).
(6) On the overhead panel, on the ADIRS CDU, set the OFF/NAV/ATT selector
switches to NAV.
Subtask 34-42-00-865-057
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RAD ALTM/2 1SA2 K12
121VU COM NAV/RAD ALTM/1 1SA1 K11
Subtask 34-42-00-865-058
C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU EIS/GPWS/115VAC 3WZ P07
4. Procedure
_________
Subtask 34-42-00-730-050
A. System Test
NOTE : This note is for RA1 test, for RA2 test you must open the circuit
breaker 1SA1.
If you do this test in descent, you can make sure that the auto call out
announcements are correct. To do this, set a small SLOPE.
To decrease the total test time, increase the speed of the altitude
change. To do this, adjust SLOPE to a larger value or set a lower STOP
ALT.
NOTE 2 : Use the boomsets to speak to the person in the AFT cargo
compartment and in the cockpit.
EFF :
ALL 34-42-00
Page 510
Nov 01/07
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
On the RA simulator:
- set these values:
* START ALT : 0 ft.
* STOP ALT : 2500 ft.
* SLOPE : 25 ft/s.
(Ref NOTE 1).
- start the test. On the CAPT and F/O PFDs, the ramp test
starts. The speed scale moves up to
2500 ft. and stops after approximately
1 minute 40 seconds.
When the altitude increases:
- on the CAPT and F/O PFDs:
. when the altitude is between 0 and
160 ft., the horizon line moves down.
The elevation scale comes into view.
. when the altitude is between 0 and
570 ft., the red ribbon adjacent to
the altitude scale moves down and
then it goes out of view.
- stop the test. On the CAPT and F/O PFDs, the radio
altitude data go out of view.
R
EFF :
001-050, 053-099, 201-203, 34-42-00
Page 511
Nov 01/07
TAI
R **ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
Subtask 34-42-00-730-050-A
NOTE : This test is for the RA1. For the RA2, use the indications between
____
parentheses.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
On the MCDU:
- at the end of the test, the TEST OK
page comes into view.
- push the line key adjacent to - the RA1 (RA2) page comes into view.
the RETURN indication.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-42-00
Page 512
Nov 01/08
TAI
**ON A/C ALL
5. Close-up
________
Subtask 34-42-00-860-053
(2) On the overhead panel, on the ADIRS CDU, set the OFF/NAV/ATT selector
switches to OFF.
EFF :
ALL 34-42-00
Page 513
Aug 01/02
R
TAI
TASK 34-42-00-710-001
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______
YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-42-00-860-050
EFF :
ALL 34-42-00
Page 514
Aug 01/02
R
TAI
Subtask 34-42-00-865-051
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RAD ALTM/2 1SA2 K12
121VU COM NAV/RAD ALTM/1 1SA1 K11
4. Procedure
_________
Subtask 34-42-00-710-051
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- move the slat/flap control The slats extend to the full position.
lever to the position 1
(Ref. TASK 27-80-00-866-004).
- open the circuit breaker 1SA1. On the CAPT and F/O PFDs:
- the altitude 0 ft. stays in view.
On the upper ECAM display unit:
- the NAV RA1 FAULT indication comes
into view.
On the CAPT and F/O glareshield panels:
- the MASTER CAUT lights come on.
In the loud speakers:
- you can hear the single chime.
- open the circuit breaker 1SA2. On the CAPT and F/O PFDs:
- the altitude 0 ft. goes out of view.
- the RA warning comes into view.
On the upper ECAM display unit:
- the NAV RA1 FAULT indication stays in
view.
- the NAV RA2 FAULT indication comes
into view.
EFF :
ALL 34-42-00
Page 515
Aug 01/02
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
On the CAPT and F/O glareshield panels:
- the MASTER CAUT lights stay on.
In the loud speakers:
- you can hear the single chime.
- close the circuit breakers 1SA1 On the CAPT and F/O PFDs:
and 1SA2. - the RA warning goes out of view after
15 seconds.
- the altitude 0 ft. comes into view.
On the upper ECAM display unit:
- the NAV RA1 FAULT and NAV RA2 FAULT
indications go out of view.
5. Close-up
________
Subtask 34-42-00-860-051
(4) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-42-00
Page 516
Aug 01/02
TAI
ANTENNA - RADIO ALTIMETER (5SA1,5SA2,6SA1,6SA2) - REMOVAL/INSTALLATION
______________________________________________________________________
TASK 34-42-11-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-42-11
Page 401
Nov 01/08
TAI
3. __________
Job Set-up
Subtask 34-42-11-861-050
Subtask 34-42-11-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 5SA1(6SA1)
121VU COM NAV/RAD ALTM/1 1SA1 K11
FOR 5SA2(6SA2)
121VU COM NAV/RAD ALTM/2 1SA2 K12
4. Procedure
_________
Subtask 34-42-11-020-051-A
EFF :
ALL 34-42-11
Page 402
Nov 01/08
TAI
Radio Altimeter Antennas
R Figure 401/TASK 34-42-11-991-001-B
R
EFF :
ALL 34-42-11
Page 403
Aug 01/07
TAI
Radio Altimeter Antennas
Figure 401A/TASK 34-42-11-991-001-C
R
EFF : 201-203, 211-211, 215-215, 219-225,
301-302, 306-307,
34-42-11
Page 404
Nov 01/08
TAI
Radio Altimeter Antennas (Alternative)
Figure 402/TASK 34-42-11-991-003
EFF :
ALL 34-42-11
Page 405
Nov 01/07
R
TAI
R **ON A/C ALL
WARNING : CUT, REMOVE AND DISCARD THE LOCKWIRE AS YOU DO THE TASK. LOOSE
_______
LOCKWIRE CAN CUT OR BLIND YOU.
NOTE : The procedure is the same for the radio altimeter antennas 5SA1,
____
5SA2, 6SA1, 6SA2.
(1) Remove the sealant from the heads of the screws (5) with a
nonmetallic scraper.
(2) Remove the attachment screws (5) from the antenna (4).
(3) Pull the antenna (4) carefully away until you can see the coaxial
connector (2).
(4) Remove and discard the lockwire from the coaxial connector (2), if
installed.
(5) Disconnect the coaxial connector (2) from the antenna connector (3).
NOTE : If the O-ring (6) is in good condition you can retain it for
____
subsequent installation.
Subtask 34-42-11-020-055
NOTE : This new procedure is the same for the radio altimeter antennas
____
5SA1, 5SA2, 6SA1, 6SA2.
(1) Remove the sealant from the heads of the screws (5) with a SCRAPER -
NON METALLIC.
(2) Remove the attachment screws (5) from the antenna (4).
EFF :
ALL 34-42-11
Page 406
Nov 01/07
TAI
(3) Pull the antenna (4) carefully away until you can see the shrink
sleeve(11).
(4) Remove the sealant from the shrink sleeve (11) with a SCRAPER - NON
METALLIC.
(5) Carefully remove the shrink sleeves (11),(10) and (12) from the
connectors (2) and (3).
(6) Temporarily attach the coaxial connector (2) on the external side of
the fuselage.
NOTE : The connector (2) could move inside the hole, if is not
____
blocked.
(7) Disconnect the coaxial connector (2) from the antenna connector (3).
NOTE : If the O-ring (6) is in good condition you can retain it for
____
subsequent installation.
Subtask 34-42-11-020-055-A
NOTE : This procedure is the same for the radio altimeter antennas 5SA1,
____
5SA2, 6SA1, 6SA2.
EFF :
ALL 34-42-11
Page 407
Nov 01/08
TAI
(1) Remove the sealant from the heads of the screws (5) with a SCRAPER -
NON METALLIC.
(2) Remove the attachment screws (5) from the antenna (4).
(3) Pull the antenna (4) carefully away until you can see the shrink
sleeve (11).
(4) Remove the sealant from the shrink sleeve (10) and (11) with a
SCRAPER - NON METALLIC.
(5) Carefully remove the shrink sleeves (10) and (11) from the connector
(2).
(6) Temporarily attach the coaxial connector (2) on the external side of
the fuselage.
NOTE : The connector (2) could move inside the hole, if is not
____
blocked.
(7) Disconnect the coaxial connector (2) from the antenna connector (3).
NOTE : If the O-ring (6) is in good condition you can retain it for
____
subsequent installation.
R
EFF : 201-203, 211-211, 215-215, 219-225,
301-302, 306-307,
34-42-11
Page 408
Nov 01/08
TAI
R **ON A/C ALL
Subtask 34-42-11-020-054
WARNING : CUT, REMOVE AND DISCARD THE LOCKWIRE AS YOU DO THE TASK. LOOSE
_______
LOCKWIRE CAN CUT OR BLIND YOU.
NOTE : The procedure is the same for the radio altimeter antennas 5SA1,
____
5SA2, 6SA1, 6SA2.
(1) Remove the sealant from the heads of the screws (5) with a
nonmetallic scraper.
(2) Remove the attachment screws (5) from the antenna (4).
(3) Pull the antenna (4) carefully away until you can see the coaxial
connector (2).
(4) Remove and discard the lockwire from the coaxial connector (2), if
installed.
(5) Disconnect the coaxial connector (2) from the antenna connector (3).
NOTE : If the O-ring (6) is in good condition you can retain it for
____
subsequent installation.
EFF :
ALL 34-42-11
Page 409
Nov 01/07
TAI
TASK 34-42-11-400-001
WARNING : DO NOT GET THE FLUID ON YOUR SKIN OR IN YOUR EYES. IF YOU DO:
_______
- FLUSH IT AWAY WITH CLEAN WATER
- GET MEDICAL AID.
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-42-11
Page 410
Nov 01/07
R
TAI
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-42-11
Page 411
Feb 01/09
TAI
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-42-11
Page 412
Nov 01/08
TAI
3. __________
Job Set-up
Subtask 34-42-11-860-050
(2) Make sure that the aircraft is in the same configuration as for the
removal task.
(3) Make sure that the parts retained from the removed component are
clean and in the correct condition.
Subtask 34-42-11-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 5SA1(6SA1)
121VU COM NAV/RAD ALTM/1 1SA1 K11
FOR 5SA2(6SA2)
121VU COM NAV/RAD ALTM/2 1SA2 K12
4. Procedure
_________
WARNING : OBEY THE MANUFACTURERS INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
MATERIAL.
THIS MATERIAL IS DANGEROUS.
EFF :
ALL 34-42-11
Page 413
Nov 01/08
TAI
Subtask 34-42-11-140-050-A
(1) Remove the used sealant from the fuselage structure (1) with a
nonmetallic scraper.
(2) Clean the component interface and/or the adjacent area with CLEANING
AGENTS (Material No. 11-010) and the lint free cloth.
Subtask 34-42-11-140-051
(1) Remove the used sealant from the fuselage structure (1) with a
nonmetallic scraper.
(2) Clean the component interface and/or the adjacent area with CLEANING
AGENTS (Material No. 11-010) and the lint free cloth.
(4) Apply masking tape to the structure (1), the edge of the antenna (4),
the screw holes and the hole for the antenna connector (3).
R Subtask 34-42-11-420-050
R (1) Make sure that the O-ring (6) is in good condition. If the O-ring (6)
R is not in good condition, use a new one.
EFF :
ALL 34-42-11
Page 414
May 01/08
TAI
R (3) Apply the SPECIAL MATERIALS (Material No. 05-013) to the bottom of
R the antenna (4).
R (4) Apply the SEALANTS (Material No. 09-019) to the area of the fuselage
R that makes an interface with the antenna (4).
R (5) Remove the masking tape from the screw holes and the hole for the
R antenna connector.
R (7) Make sure that the electrical connectors are clean and in the correct
R condition.
R (8) Connect the coaxial connector (2) to the antenna connector (3).
R (9) TORQUE the coaxial connector (2) to 0.265 m.daN (23.45 lbf.in) and
R safety it with MISCELLANEOUS (Material No. 19-009) (7) or safety it
R with one drop of BONDING AND ADHESIVE COMPOUNDS (Material No. 08-048)
R and identification with safety-paint.
R (10) Put the antenna (4) in position and install the screws (5). Make sure
R that the alignment mark on the antenna points in the direction of
R flight.
R NOTE : The
____ alignment mark can be different for different antennas.
R For example, it can be:
R - A FWD sing
R - A dot at the end of a line
R - A datum mark.
R (11) TORQUE the screws (5) to between 0.3 and 0.35 m.daN (26.54 and 30.97
R lbf.in) diagonally opposite.
R NOTE : The antenna mounting screws (5) give the electrical bonding
____
R between the antenna (4) and the fuselage structure (1)
R (Ref. TASK 20-28-00-912-005).
R (14) Make sure that the bonding contact resistance between the antenna (4)
R and the fuselage structure (1) is not higher than 5 milliohms
R (Ref. TASK 20-28-00-912-005).
R
EFF :
001-050, 053-099, 201-203, 34-42-11
Page 415
May 01/08
TAI
(15) Make a sealing bead with SEALANTS (Material No. 09-016) or SEALANTS
(Material No. 09-008E) around the antenna (4).
(16) Apply SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-
008E) to the heads of the screws (5).
(17) Make the contour of the sealant on the screws (5) and around the
antenna (4) smooth.
(19) Apply STRUCTURE PAINTS (Material No. 16-003) to the sealant around
the base of the antenna (4).
(20) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
001) to the sealant on the head of the screws (5).
Subtask 34-42-11-420-050-A
(1) Make sure that the O-ring (6) is in good condition. If the O-ring (6)
is not in good condition, use a new one.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 401-499,
34-42-11
Page 416
Nov 01/08
TAI
(5) Make sure that the electrical connectors are clean and in the correct
condition.
(6) Connect the coaxial connector (2) to the antenna connector (3).
(7) TORQUE the coaxial connector (2) to 0.265 m.daN (23.45 lbf.in) and
safety it with MISCELLANEOUS (Material No. 19-009) or safety it with
one drop of BONDING AND ADHESIVE COMPOUNDS (Material No. 08-048) and
identification with safety-paint.
(8) Put the antenna (4) in position and install the screws (5). Make sure
that the alignment mark on the antenna points in the direction of
flight.
NOTE : The
____ alignment mark can be different for different antennas.
For example, it can be:
- A FWD sign
- A dot at the end of a line
- A datum mark.
(9) TORQUE the screws (5) to between 0.3 and 0.35 m.daN (26.54 and 30.97
lbf.in) diagonally opposite.
NOTE : The antenna mounting screws (5) give the electrical bonding
____
between the antenna (4) and the fuselage structure (1)
(Ref. TASK 20-28-00-912-005).
(10) Make sure that the bonding contact resistance between the antenna (4)
and the fuselage structure (1) is not higher than 5 milliohms
(Ref. TASK 20-28-00-912-005).
(11) Make a sealing bead with SEALANTS (Material No. 09-016) around the
antenna (4).
(12) Apply SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-
008E) to the heads of the screws (5).
(13) Make the contour of the sealant on the screws (5) and around the
antenna (4) smooth.
(15) Apply STRUCTURE PAINTS (Material No. 16-003) to the sealant around
the base of the antenna (4).
R
EFF : 001-050, 053-099, 211-212, 215-215,
218-299, 401-499,
34-42-11
Page 417
Nov 01/08
TAI
(16) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
001) to the sealant on the head of the screws (5).
Subtask 34-42-11-420-050-B
(1) Make sure that the O-ring (6) is in good condition. If the O-ring (6)
is not in good condition, use a new one.
(5) Make sure that the electrical connectors are clean and in the correct
condition.
(6) Connect the coaxial connector (2) to the antenna connector (3).
(7) TORQUE the coaxial connector (2) to 0.265 m.daN (23.45 lbf.in) and
safety it with MISCELLANEOUS (Material No. 19-009) or safety it with
one drop of BONDING AND ADHESIVE COMPOUNDS (Material No. 08-048) and
identification with safety-paint.
R
EFF : 001-050, 053-099, 211-212, 215-215,
218-299, 301-399, 401-499,
34-42-11
Page 418
Nov 01/08
TAI
R (8) Put the antenna (4) in position and install the screws (5). Make sure
R that the alignment mark on the antenna points in the direction of
R flight.
R NOTE : The
____ alignment mark can be different for different antennas.
R For example, it can be:
R - A FWD sign
R - A dot at the end of a line
R - A datum mark.
R (9) TORQUE the screws (5) to between 0.3 and 0.35 m.daN (26.54 and 30.97
R lbf.in) diagonally opposite.
R NOTE : The antenna mounting screws (5) give the electrical bonding
____
R between the antenna (4) and the fuselage structure (1)
R (Ref. TASK 20-28-00-912-005).
R (10) Make sure that the bonding contact resistance between the antenna (4)
R and the fuselage structure (1) is not higher than 5 milliohms
R (Ref. TASK 20-28-00-912-005).
R (11) Make a sealing bead with SEALANTS (Material No. 09-016) around the
R antenna (4).
R (12) Apply SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-
R 008E) to the heads of the screws (5).
R (13) Make the contour of the sealant on the screws (5) and around the
R antenna (4) smooth.
R (15) Apply STRUCTURE PAINTS (Material No. 16-003) to the sealant around
R the base of the antenna (4).
R (16) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
R 001) to the sealant on the head of the screws (5).
R
EFF :
301-399, 34-42-11
Page 419
May 01/08
TAI
R **ON A/C ALL
Subtask 34-42-11-420-054
(1) Make sure that the O-ring (6) is in good conditiopn. If the O-ring
(6) is not in good condition, use a new one.
(3) Apply the SPECIAL MATERIALS (Material No. 05-013) to the bottom of
the antenna (4).
(4) Apply the SEALANTS (Material No. 09-019) to the area of the fuselage
that makes an interface with the antenna (4).
(5) Remove the masking tape from the screw holes and the hole for the
antenna connector.
(7) Make sure that the electrical connectors are clean and in the correct
condition.
(8) Connect the coaxial connector (2) to the antenna connector (3).
(9) TORQUE the coaxial connector (2) to 0.265 m.daN (23.45 lbf.in) and
safety it with MISCELLANEOUS (Material No. 19-009) (7) or safety it
with one drop of BONDING AND ADHESIVE COMPOUNDS (Material No. 08-048)
and identification with safety-paint.
(10) Put the antenna (4) in position and install the screws (5) to the
fuselage structure.
NOTE : The
____ alignment mark can be different for different antennas.
For example, it can be:
- A FWD sing
- A dot at the end of a line
- A datum mark.
EFF :
ALL 34-42-11
Page 420
May 01/08
TAI
(11) TORQUE the screws (5) to between 0.3 and 0.35 m.daN (26.54 and 30.97
lbf.in) diagonally opposite.
NOTE : The antenna mounting screws (5) give the electrical bonding
____
between the antenna (4) and the fuselage structure (1)
(Ref. TASK 20-28-00-912-005).
(14) Make sure that the bonding contact resistance between the antenna (4)
and the fuselage structure (1) is not higher than 5 milliohms
(Ref. TASK 20-28-00-912-005).
(15) Make a sealing bead with SEALANTS (Material No. 09-016) or SEALANTS
(Material No. 09-008E) around the antenna (4).
(16) Apply SEALANTS (Material No. 09-016) to the heads of the screws (5).
(17) Make the contour of the sealant on the screws (5) and around the
antenna (4) smooth.
(19) Apply STRUCTURE PAINTS (Material No. 16-003) to the sealant around
the base of the antenna (4).
(20) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
001) to the sealant on the head of the screws (5).
R
EFF :
ALL 34-42-11
Page 421
May 01/08
TAI
R **ON A/C 001-050, 053-099, 212-212, 218-218, 226-299, 401-499,
Subtask 34-42-11-420-055
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______
AREA WHEN YOU USE SPECIAL MATERIALS.
IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH
OR IN YOUR EYES :
-FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15
MINUTES.
-GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS.
DO NOT BREATHE THE FUMES FROM THE MATERIAL.
DO NOT SMOKE WHEN YOU USE THE MATERIAL.
DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF
HEAT.
THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE
AND SKIN IRRITANTS.
(1) Make sure that the O-ring (6) is in good condition. If the O-ring (6)
is not in good condition, use a new one.
(4) Push the shrink sleeve (12) ABS0916B07 in position below the thread
(14) of the antenna connector (3) and shrink it.
(5) Push the shrink sleeve (11) ABS0916B08 over the coaxial cable.
(7) Make sure that the electrical connectors are clean and in the correct
condition.
(8) Connect the coaxial connector (2) to the antenna connector (3).
(9) TORQUE the coaxial connector (2) to 0.265 m.daN (23.45 lbf.in).
(10) Apply BONDING AND ADHESIVE COMPOUNDS (Material No. 08-092) (10)
around the cable.
R
EFF : 001-050, 053-099, 212-212, 218-218,
226-299, 401-499,
34-42-11
Page 422
May 01/08
TAI
(11) Push the shrink sleeve (12) ABS0916B08 in position over both
connectors (2) and (3) and shrink it.
(13) Put the antenna (4) in position. Make sure that the FWD sign or the
datum mark on the antenna points are in the direction of flight.
Install the screws (5).
NOTE : The antenna mounting screws (5) give the electrical bonding
____
between the antenna (4) and the fuselage structure (1) .
(Ref. TASK 20-28-00-912-005)
(14) TORQUE the screws (5) to between 0.3 and 0.35 m.daN (26.54 and 30.97
lbf.in) in a diagonally opposite sequence.
(16) Make sure that the bonding contact resistance between the antenna (4)
and the fuselage structure (1) is not higher than 5 milliohms
(Ref. TASK 20-28-00-912-005).
R
EFF : 001-050, 053-099, 212-212, 218-218,
226-299, 401-499,
34-42-11
Page 423
May 01/08
TAI
(a) Make a sealing bead with SEALANTS (Material No. 09-016) or
SEALANTS (Material No. 09-008E) around the antenna (4).
(18) Apply SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-
008E) to the heads of the screws (5).
(a) Make the contour of the sealant on the screws (5) and around the
antenna (4) smooth.
(22) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
001) to the sealant on the head of the screws (5).
R
EFF : 001-050, 053-099, 212-212, 218-218,
226-299, 401-499,
34-42-11
Page 424
May 01/08
TAI
R **ON A/C 303-304, 308-399,
R Subtask 34-42-11-420-055-B
R WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______
R AREA WHEN YOU USE SPECIAL MATERIALS.
R IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH
R OR IN YOUR EYES :
R -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15
R MINUTES.
R -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS.
R DO NOT BREATHE THE FUMES FROM THE MATERIAL.
R DO NOT SMOKE WHEN YOU USE THE MATERIAL.
R DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF
R HEAT.
R THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE
R AND SKIN IRRITANTS.
R (1) Make sure that the O-ring (6) is in good condition. If the O-ring (6)
R is not in good condition, use a new one.
R (4) Push the shrink sleeve (12) ABS0916B07 in position below the thread
R (14) of the antenna connector (3) and shrink it.
R (5) Push the shrink sleeve (11) ABS0916B08 over the coaxial cable.
R (7) Make sure that the electrical connectors are clean and in the correct
R condition.
R (8) Connect the coaxial connector (2) to the antenna connector (3).
R (9) TORQUE the coaxial connector (2) to 0.265 m.daN (23.45 lbf.in).
R (10) Apply BONDING AND ADHESIVE COMPOUNDS (Material No. 08-092) (10)
R around the cable.
EFF :
303-304, 308-399, 34-42-11
Page 425
May 01/08
TAI
R (11) Push the shrink sleeve (12) ABS0916B08 in position over both
R connectors (2) and (3) and shrink it.
R (13) Put the antenna (4) in position. Make sure that the FWD sign or the
R datum mark on the antenna points are in the direction of flight.
R Install the screws (5).
R NOTE : The antenna mounting screws (5) give the electrical bonding
____
R between the antenna (4) and the fuselage structure (1) .
R (Ref. TASK 20-28-00-912-005)
R (14) TORQUE the screws (5) to between 0.3 and 0.35 m.daN (26.54 and 30.97
R lbf.in) in a diagonally opposite sequence.
R (16) Make sure that the bonding contact resistance between the antenna (4)
R and the fuselage structure (1) is not higher than 5 milliohms
R (Ref. TASK 20-28-00-912-005).
EFF :
303-304, 308-399, 34-42-11
Page 426
May 01/08
TAI
R (a) Make a sealing bead with SEALANTS (Material No. 09-016) or
R SEALANTS (Material No. 09-008E) around the antenna (4).
R (18) Apply SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-
R 008E) to the heads of the screws (5).
R (a) Make the contour of the sealant on the screws (5) and around the
R antenna (4) smooth.
R (22) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
R 001) to the sealant on the head of the screws (5).
EFF :
303-304, 308-399, 34-42-11
Page 427
May 01/08
TAI
R **ON A/C 201-203, 211-211, 215-215, 219-225,
Subtask 34-42-11-420-055-A
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______
AREA WHEN YOU USE SPECIAL MATERIALS.
IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH
OR IN YOUR EYES :
-FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15
MINUTES.
-GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS.
DO NOT BREATHE THE FUMES FROM THE MATERIAL.
DO NOT SMOKE WHEN YOU USE THE MATERIAL.
DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF
HEAT.
THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE
AND SKIN IRRITANTS.
(1) Make sure that the O-ring (6) is in good condition. If the O-ring (6)
is not in good condition, use a new one.
(4) Push the shrink sleeve (10) ABS0916B07 over the coaxial cable.
(5) Push the shrink sleeve (11) ABS0836B05 over the coaxial cable.
(7) Make sure that the electrical connectors are clean and in the correct
condition.
(8) Connect the coaxial connector (2) to the antenna connector (3).
(9) TORQUE the coaxial connector (2) to 0.265 m.daN (23.45 lbf.in).
(10) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
020) on the connectors (2) and (3) to identify the position.
R
EFF :
201-203, 211-211, 215-215, 219-225, 34-42-11
Page 428
Nov 01/08
TAI
(11) Push the shrink sleeve (10) ABS0916B07 in position on the lower part
of the coaxial connector (2) and shrink it.
(a) Apply some sealant BONDING AND ADHESIVE COMPOUNDS (Material No.
08-092) over the lower end of the shrinksleeve (10).
(12) Push the shrink sleeve (11) ABS0836B05 in position over both
connectors (2) and (3) and shrink it.
(a) Apply some sealant BONDING AND ADHESIVE COMPOUNDS (Material No.
08-092) over the ends of the shrinksleeve (11).
(14) Put the antenna (4) in position. Make sure that the FWD sign or the
datum mark on the antenna points in the direction of flight. Install
the screws (5).
NOTE : The antenna mounting screws (5) give the electrical bonding
____
between the antenna (4) and the fuselage structure (1).
(16) TORQUE the screws (5) to between 0.3 and 0.35 m.daN (26.54 and 30.97
lbf.in) in a diagonally opposite sequence.
(18) Make sure that the bonding contact resistance between the antenna (4)
and the fuselage structure (1) is not higher than 5 milliohms
(Ref. TASK 20-28-00-912-005).
R
EFF :
201-203, 211-211, 215-215, 219-225, 34-42-11
Page 429
Nov 01/08
TAI
(19) Apply sealant:
(20) Apply SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-
008E) to the heads of the screws (5).
(a) Make the contour of the sealant on the screws (5) and around the
antenna (4) smooth.
(24) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
001B) to the sealant on the head of the screws (5).
R
EFF :
201-203, 211-211, 215-215, 219-225, 34-42-11
Page 430
Nov 01/08
TAI
R **ON A/C 301-302, 306-307,
R Subtask 34-42-11-420-055-C
R WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______
R AREA WHEN YOU USE SPECIAL MATERIALS.
R IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH
R OR IN YOUR EYES :
R -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15
R MINUTES.
R -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS.
R DO NOT BREATHE THE FUMES FROM THE MATERIAL.
R DO NOT SMOKE WHEN YOU USE THE MATERIAL.
R DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF
R HEAT.
R THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE
R AND SKIN IRRITANTS.
R (1) Make sure that the O-ring (6) is in good condition. If the O-ring (6)
R is not in good condition, use a new one.
R (4) Push the shrink sleeve (10) ABS0916B07 over the coaxial cable.
R (5) Push the shrink sleeve (11) ABS0836B05 over the coaxial cable.
R (7) Make sure that the electrical connectors are clean and in the correct
R condition.
R (8) Connect the coaxial connector (2) to the antenna connector (3).
R (9) TORQUE the coaxial connector (2) to 0.265 m.daN (23.45 lbf.in).
R (10) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
R 020) on the connectors (2) and (3) to identify the position.
EFF :
301-302, 306-307, 34-42-11
Page 431
May 01/08
TAI
R (11) Push the shrink sleeve (10) ABS0916B07 in position on the lower part
R of the coaxial connector (2) and shrink it.
R (a) Apply some sealant BONDING AND ADHESIVE COMPOUNDS (Material No.
R 08-092) over the lower end of the shrinksleeve (10).
R (12) Push the shrink sleeve (11) ABS0836B05 in position over both
R connectors (2) and (3) and shrink it.
R (a) Apply some sealant BONDING AND ADHESIVE COMPOUNDS (Material No.
R 08-092) over the ends of the shrinksleeve (11).
R (14) Put the antenna (4) in position. Make sure that the FWD sign or the
R datum mark on the antenna points in the direction of flight. Install
R the screws (5).
R NOTE : The antenna mounting screws (5) give the electrical bonding
____
R between the antenna (4) and the fuselage structure (1).
R (16) TORQUE the screws (5) to between 0.3 and 0.35 m.daN (26.54 and 30.97
R lbf.in) in a diagonally opposite sequence.
R (18) Make sure that the bonding contact resistance between the antenna (4)
R and the fuselage structure (1) is not higher than 5 milliohms
R (Ref. TASK 20-28-00-912-005).
EFF :
301-302, 306-307, 34-42-11
Page 432
May 01/08
TAI
R (19) Apply sealant:
R (20) Apply SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-
R 008E) to the heads of the screws (5).
R (a) Make the contour of the sealant on the screws (5) and around the
R antenna (4) smooth.
R (24) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
R 001B) to the sealant on the head of the screws (5).
EFF :
301-302, 306-307, 34-42-11
Page 433
May 01/08
TAI
**ON A/C ALL
Subtask 34-42-11-865-052
F. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
FOR 5SA1(6SA1)
1SA1
FOR 5SA2(6SA2)
1SA2
Subtask 34-42-11-740-050
G. Do the BITE test of the radio altimeter system (Ref. TASK 34-42-00-740-
002).
5. Close-up
________
Subtask 34-42-11-862-050
EFF :
ALL 34-42-11
Page 434
May 01/08
TAI
TRANSCEIVER - RADIO ALTIMETER (2SA1,2SA2) - REMOVAL/INSTALLATION
________________________________________________________________
TASK 34-42-33-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-42-33-861-050
EFF :
ALL 34-42-33
Page 401
Feb 01/96
TAI
Subtask 34-42-33-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 2SA1
R
121VU COM NAV/RAD ALTM/1 1SA1 K11
R
FOR 2SA2
R
121VU COM NAV/RAD ALTM/2 1SA2 K12
Subtask 34-42-33-010-050
C. Get Access
(1) Open the AFT Cargo Door 826. (Ref. TASK 52-30-00-860-001)
(2) Put the access platform at the aft cargo door 826.
4. Procedure
_________
Subtask 34-42-33-020-051
NOTE : The removal procedure is the same for the radio altimeter
____
transceiver 2SA1 and 2SA2.
(1) Loosen the knurled nuts (3) and lower the fasteners.
R (2) Carefully remove the transceiver (1) from the rack (2).
R NOTE : Make sure that you do not damage the electrical connector
____
R pins.
EFF :
ALL 34-42-33
Page 402
Aug 01/98
TAI
R Radio Altimeter Transceiver
Figure 401/TASK 34-42-33-991-001
EFF :
ALL 34-42-33
Page 403
Aug 01/98
TAI
(3) Put blanking caps on the disconnected electrical connectors.
EFF :
ALL 34-42-33
Page 404
Aug 01/98
R
TAI
TASK 34-42-33-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-42-33-860-050
(2) Make sure that the AFT cargo-compartment door (Ref. TASK 52-30-00-
860-001) is open.
EFF :
ALL 34-42-33
Page 405
May 01/98
R
TAI
R (3) Make sure that the access panel 152GW is removed.
(4) Make sure that the access platform is in position at the Aft cargo
door 826.
Subtask 34-42-33-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 2SA1
R
121VU COM NAV/RAD ALTM/1 1SA1 K11
R
FOR 2SA2
R
121VU COM NAV/RAD ALTM/2 1SA2 K12
4. Procedure
_________
Subtask 34-42-33-420-050
NOTE : The installation procedure is the same for the radio altimeter
____
transceiver 2SA1 and 2SA2.
(4) Make sure that the electrical connectors are clean and in the correct
condition.
(5) Carefully install the transceiver (1) into the rack (2).
EFF :
ALL 34-42-33
Page 406
Aug 01/98
TAI
(6) Lift the fasteners and tighten the knurled nuts (3) until the
transceiver (1) is correctly attached.
Subtask 34-42-33-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
FOR 2SA1
1SA1
FOR 2SA2
1SA2
Subtask 34-42-33-740-050
5. Close-up
________
Subtask 34-42-33-860-051
R (1) On the FTL CTL panel 23VU, push the FAC1 pushbutton switch (the OFF
R legend goes off.
R (2) On the FTL CTL panel 24VU, push the ELAC2 pushbutton switch (the OFF
R legend goes off.
Subtask 34-42-33-410-052
B. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
(4) Close the AFT Cargo Door 826 (Ref. TASK 52-30-00-860-002).
EFF :
ALL 34-42-33
Page 407
Feb 01/02
TAI
Subtask 34-42-33-862-050
EFF :
ALL 34-42-33
Page 408
Aug 01/98
R
TAI
FAN - RADIO ALTIMETER TRANSCEIVER (3SA1,3SA2) - REMOVAL/INSTALLATION
____________________________________________________________________
TASK 34-42-45-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-42-45-861-050
EFF :
ALL 34-42-45
Page 401
Feb 01/96
TAI
Subtask 34-42-45-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 3SA1
R
121VU COM NAV/RAD ALTM/1 1SA1 K11
R
FOR 3SA2
R
121VU COM NAV/RAD ALTM/2 1SA2 K12
Subtask 34-42-45-010-050
C. Get Access
(1) Open the AFT Cargo Door 826 (Ref. TASK 52-30-00-860-001).
(2) Put the access platform at the aft cargo door 826.
4. Procedure
_________
Subtask 34-42-45-020-052
NOTE : The procedure is the same for the radio altimeter-transceiver fans
____
3SA1 and 3SA2.
(2) Remove the screws (2), the washers (3) and remove the fan assembly
(1).
(3) Remove the nuts (6), the washers (5), the bolts (4), and remove the
cover (7).
EFF :
ALL 34-42-45
Page 402
Aug 01/98
TAI
Radio Altimeter-Transceiver Fan.
Figure 401/TASK 34-42-45-991-001
EFF :
ALL 34-42-45
Page 403
Aug 01/98
R
TAI
(5) Put blanking caps on the disconnected electrical connectors.
(6) Remove the nuts (11), the washers (10) and the bolts (9).
EFF :
ALL 34-42-45
Page 404
Aug 01/98
R
TAI
TASK 34-42-45-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-42-45-860-050
(2) Make sure that the Aft cargo-compartment door (Ref. TASK 52-30-00-
860-001) is open.
EFF :
ALL 34-42-45
Page 405
Aug 01/02
TAI
(3) Make sure that the access panel 152HW is removed.
(4) Make sure that the access platform is in position at the Aft cargo
door 826.
Subtask 34-42-45-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 3SA1
121VU COM NAV/RAD ALTM/1 1SA1 K11
FOR 3SA2
121VU COM NAV/RAD ALTM/2 1SA2 K12
4. Procedure
_________
Subtask 34-42-45-420-050
(4) Make sure that the electrical connectors are clean and in the correct
condition.
(5) Install the blower (12) with the bolts (9), the washers (10) and the
nuts (11).
(7) Install the cover (7) with the bolts (4), the washers (5) and the
nuts (6).
(8) Install the fan assembly (1) with the screws (2) and the washers (3).
EFF :
ALL 34-42-45
Page 406
Aug 01/02
R
TAI
Subtask 34-42-45-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
FOR 3SA1
1SA1
FOR 3SA2
1SA2
Subtask 34-42-45-750-050
C. Do the fan test of the radio altimeter system (Ref. TASK 34-42-00-750-
001).
5. Close-up
________
Subtask 34-42-45-410-050
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
(4) Close the AFT Cargo Door 826 (Ref. TASK 52-30-00-860-002).
Subtask 34-42-45-862-050
EFF :
ALL 34-42-45
Page 407
Aug 01/98
R
TAI
FAN - RADIO ALTIMETER TRANSCEIVER (3SA1,3SA2) - CLEANING/PAINTING
_________________________________________________________________
TASK 34-42-45-100-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-42-45
Page 701
Aug 01/02
TAI
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-42-45-861-051
Subtask 34-42-45-865-053
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
FOR 3SA1
121VU COM NAV/RAD ALTM/1 1SA1 K11
FOR 3SA2
121VU COM NAV/RAD ALTM/2 1SA2 K12
Subtask 34-42-45-010-051
C. Get Access
(1) Open the AFT Cargo Door 826 (Ref. TASK 52-30-00-860-001).
(2) Put the access platform at the aft cargo door 826.
4. Procedure
_________
Subtask 34-42-45-020-053
(2) Remove the radio altimeter transceiver fan (Ref. TASK 34-42-45-000-
001).
EFF :
ALL 34-42-45
Page 702
Aug 01/02
TAI
Subtask 34-42-45-100-052
B. Cleaning
(1) Use a soft brush and/or an air blower to clean the fan or the fan
housing.
NOTE : Make sure that the fan and the fan housing are blocked when
____
you use an air blower. Cleaning with an air blower can cause
exessive fan rotation speed and thus fan failure.
Subtask 34-42-45-420-051
(1) Install the radio altimeter transceiver fan (Ref. TASK 34-42-45-400-
001).
Subtask 34-42-45-865-054
D. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
FOR 3SA1
1SA1
FOR 3SA2
1SA2
Subtask 34-42-45-710-051
E. Do the test
(1) Do the fan test of the radio altimeter system (Ref. TASK 34-42-00-
750-001).
(2) Do the Bite test of the radio altimeter (Ref. TASK 34-42-00-740-002).
EFF :
ALL 34-42-45
Page 703
Aug 01/02
TAI
5. Close-up
________
Subtask 34-42-45-410-052
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
(4) Close the AFT Cargo Door 826 (Ref. TASK 52-30-00-860-002).
Subtask 34-42-45-862-051
EFF :
ALL 34-42-45
Page 704
Aug 01/02
TAI
TRAFFIC COLLISION AVOIDANCE SYSTEM (TCAS) - DESCRIPTION AND OPERATION
_____________________________________________________________________
1. General
_______
A. Presentation
The TCAS II (Traffic Collision Avoidance System) is an optional system
whose function is to detect and display aircraft in the immediate
vicinity and to provide the flight crew with indications to avoid these
intruders by changing the flight path in the vertical plane only.
The TCAS periodically interrogates their transponders, computes their
trajectories and constantly determines their potential threat. The
acquisition of their signals is achieved by means of two transmit/receive
antennas, one located on the underside of the fuselage and the other on
the top.
The system can establish individualized communications with each aircraft
through ATC/Mode S transponders, thus permitting operation in dense
traffic areas while avoiding an overload of radio-electric transmissions
that would result from a general all-intruder response.
The TCAS II system is designed to provide the air traffic control system
with an additional possibility. It usually operates independently but may
be controlled from ground stations.
The TCAS has the capability to communicate with ATCRBS (Air Traffic
Control Radar Beacon System) ground stations equipped with the Mode S
system to indicate to them the vertical maneuver orders presented to the
aircraft pilot. This information can facilitate the task of the ground
station controller who, in turn, can modify the TCAS operating mode and
cancel the avoidance orders if he deems it necessary for safety.
The current surveillance envelope covers an area of plus or minus 2700 ft
in altitude and 14 NM minimum in range, but display range is authorized
up to 30 NM in range and plus or minus 1200 ft in altitude.
The system maintains surveillance within a sphere determined by the
transmit power and receiver sensitivity of the TCAS computer. The area in
which a threat is imminent depends on the speed and path of the own A/C
and the threat A/C.
There is an area defined as TAU within the surveillance arc which
represents the minimum time the flight crew needs to discern a collision
threat and take evasive action.
The TCAS detection capability covers an area of 30 NM in range and plus
or minus 9900 ft in altitude but display range is authorized up to plus
or minus 1200 ft in altitude.
(Ref. Fig. 001)
EFF :
ALL 34-43-00
Page 1
Nov 01/07
TAI
TCAS - Surveillance and Display
Figure 001
R
EFF :
001-050, 201-203, 301-304, 34-43-00
Page 2
Nov 01/07
TAI
**ON A/C 053-099,
A. Not Applicable
A. Presentation
The TCAS II (Traffic Collision Avoidance System) is a system whose
function is to detect and display aircraft in the immediate vicinity and
to provide the flight crew with indications to avoid these intruders by
changing the flight path in the vertical plane only.
TCAS change 7 has been mandatory in Europe since year 2000.
The TCAS periodically interrogates their transponders, computes their
trajectories and constantly determines their potential threat. Their
acquisition is achieved by means of two transmit/receive antennas, one
located on the underside of the fuselage and the other on the top.
The system can establish individualized communications with each aircraft
through ATC/Mode S transponders, thus permitting operation in dense
traffic areas while avoiding an overload of radio-electric transmissions
that would result from a general all-intruder response.
The TCAS II system is designed to provide the air traffic control system
with an additional possibility: it usually operates independently but may
be also controlled from ground stations.
The TCAS has the capability to communicate with ATCRBS (Air Traffic
Control Radar Beacon System) ground stations equipped with the Mode S
system to indicate to them the vertical maneuver orders presented to the
aircraft pilot. This information can facilitate the task of the ground
station controller who, in turn, can modify the TCAS operating mode and
cancel the avoidance orders if he deems it necessary for safety.
The system maintains surveillance within a sphere determined by the
transmit power and receiver sensitivity of the TCAS computer. The area in
which a threat is imminent depends on the speed and path of the own A/C
and the threat A/C.
R
EFF :
053-099, 234-299, 405-499, 34-43-00
Page 3
Nov 01/08
TAI
There is an area defined as TAU (Ref. para. 6.D.(2)) within the
surveillance arc which represents the minimum time the flight crew needs
to discern a collision threat and take evasive action.
The TCAS can track up to 40 intruders at the same time.
Its detection capability covers:
- in range: an area of 30 NM around the aircraft
- in altitude: plus or minus 9900 ft.
Display is authorized in three possible ranges:
- Above: -2700 ft to 9900 ft
- Below: -9900 ft to 2700 ft
- Normal: -2700 ft to 2700 ft
(Ref. Fig. 001A)
The description of the system is conform to the RTCA DO 185A change 7.
A. Presentation
The TCAS II (Traffic Collision Avoidance System) is an optional system
whose function is to detect and display aircraft in the immediate
vicinity and to provide the flight crew with indications to avoid these
intruders by changing the flight path in the vertical plane only.
The TCAS periodically interrogates their transponders, computes their
trajectories and constantly determines their potential threat. The
acquisition of their signals is achieved by means of two transmit/receive
antennas, one located on the underside of the fuselage and the other on
the top.
The system can establish individualized communications with each aircraft
through ATC/Mode S transponders, thus permitting operation in dense
traffic areas while avoiding an overload of radio-electric transmissions
that would result from a general all-intruder response.
The TCAS II system is designed to provide the air traffic control system
with an additional possibility. It usually operates independently but may
be controlled from ground stations.
The TCAS has the capability to communicate with ATCRBS (Air Traffic
Control Radar Beacon System) ground stations equipped with the Mode S
system to indicate to them the vertical maneuver orders presented to the
aircraft pilot. This information can facilitate the task of the ground
station controller who, in turn, can modify the TCAS operating mode and
cancel the avoidance orders if he deems it necessary for safety.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-43-00
Page 4
Nov 01/08
TAI
TCAS - Surveillance and Display
Figure 001A
R
EFF :
ALL 34-43-00
Page 5
Aug 01/08
TAI
The system maintains surveillance within a sphere determined by the
transmit power and receiver sensitivity of the TCAS computer. The area in
which a threat is imminent depends on the speed and path of the own A/C
and the threat A/C.
There is an area defined as TAU within the surveillance arc which
represents the minimum time the flight crew needs to discern a collision
threat and take evasive action.
The TCAS detection capability covers an area of 30 NM in range and plus
or minus 9900 ft in altitude but display range is authorized up to plus
or minus 2700 ft in altitude.
(Ref. Fig. 001A)
B. Principle
When an aircraft is airborne, its TCAS periodically transmits
interrogation signals for all ATCRBS and Mode S transponder-equipped
aircraft in the vicinity. These interrogations are received by the ATCRBS
ground stations and by the transponders of the other aircraft.
In response to these interrogations, the transponders of nearby aircraft
return signals containing their altitude value. The TCAS computes the
range between the two aircraft by measuring the elapsed time between
transmission of the interrogation and reception of the reply.
The altitude, altitude rate, range and range rate are determined by a
periodic tracking of these exchanges and the data are used for intruder
threat assessment.
Each threat is treated individually but the TCAS determines the best
collision avoidance possibility with respect to all aircraft in its
vicinity, while establishing maneuver coordination with the other
TCAS-equipped aircraft. The optimum maneuver is the one that ensures an
adequate separation of trajectories with a minimum vertical trend
variation.
C. Advisories
Visual and aural advisories are supplied by the TCAS computer whenever
assessment of the relative position of two aircraft reveals a potential
collision hazard.
The Traffic Advisories (TA) indicate the position of nearby aircraft
which are or may become a threat. Their display alerts the flight crew to
the presence of intruders and facilitates their visual acquisition.
The Resolution Advisories (RA) may be divided into two categories:
EFF :
ALL 34-43-00
Page 6
Feb 01/08
R
TAI
- Corrective Advisories that instruct the pilot to deviate from current
vertical rate
- Preventive Advisories that instruct the pilot to avoid certain
maneuvers.
D. Display
Visual indications are presented on the Electronic Flight Instrument
System (EFIS).
The Navigation Display (ND) is used to indicate the situation in the
nearby traffic area: a symbol is displayed for each intruder on the image
in the ARC or ROSE mode.
The avoidance maneuver indications, if any, are displayed on the vertical
speed scale of the Primary Flight Display (PFD) by means of a band of
colored sectors showing the vertical speed value to be adopted in order
to avoid any risk of collision.
E. Coordination
The avoidance maneuvers initiated by the TCAS could create a conflict
situation if directed at another TCAS-equipped aircraft as this aircraft
may also take similar evasive action, resulting in an unchanged
situation.
To avoid this situation, a communication link between the two aircraft is
established via the transponders, exchanging coordination messages.
The first aircraft to detect the other one initiates the communication
procedure, indicates the maneuvers it intends to perform and communicates
orders to the other aircraft requesting it to maintain its trajectory.
This necessarily involves the use of Mode S transponders, the only
equipment of this type possessing the LINK function required for data
exchange.
The Mode S transponders provide the capability to transmit a unique
address (24 bits) assigned to each aircraft, permitting them to reply
individually to other TCAS-equipped aircraft. It can respond to ground
station interrogations in Mode A and Mode C and also in Mode S if the
stations are suitably equipped.
The ground stations can modify the TCAS operating mode via the
transponder link so as to inhibit resolution advisories in certain
conditions.
2. __________________
Component Location
EFF :
ALL 34-43-00
Page 7
Feb 01/08
R
TAI
R TCAS - Component Location
Figure 002
EFF :
053-099, 34-43-00
Page 8
May 01/06
TAI
**ON A/C ALL
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
3SH CTL UNIT-ATC/TCAS 11VU 211 831 34-52-12
1SG CMPTR-TCAS 82VU 128 824 34-43-34
7SG1 ANTENNA-TCAS, TOP 230 34-43-11
7SG2 ANTENNA-TCAS, BOTTOM 130 34-43-11
3. __________________
System Description
A. Principle
The TCAS II uses the ATC/Mode S transponders to locate and identify the
aircraft in the protected airspace which are equipped with ATC
transponders. Traffic advisories are displayed on the Navigation Displays
(ND). If an aircraft constitutes a risk of collision, the TCAS II
computer provides the resolution advisory for collision avoidance in the
form of a vertical maneuver which will increase separation between both
aircraft; this advisory is displayed on the vertical speed scale of the
Primary Flight Display (PFD) and a synthetic voice is transmitted through
the cockpit loud speakers.
B. System Architecture
(Ref. Fig. 003, 004)
The TCAS will comprise:
- a TCAS II computer 1SG
- two directional antennas 7SG1, 7SG2
In addition, the system is linked to the two independent ATC/Mode S
systems, each comprising:
- a transponder 1SH1 (1SH2)
- two antennas 7SH1, 7SH3 (7SH2, 7SH4)
- an ATC/TCAS control unit 3SH
EFF :
ALL 34-43-00
Page 9
Feb 01/08
R
TAI
TCAS - Component Location
Figure 002A
EFF :
ALL 34-43-00
Page 10
Feb 01/08
R
TAI
TCAS Block Diagram - Data Acquisition
Figure 003
EFF :
ALL 34-43-00
Page 11
Feb 01/06
R
TAI
TCAS Block Diagram - Maintenance and Display
Figure 004
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-404,
34-43-00
Page 12
Nov 01/08
TAI
- the MCDU and the centralized fault display interface unit (CFDIU) 1TW
for test purpose.
The EFIS display units display the TCAS data.
C. Not Applicable
A. TCAS Computer
The TCAS computer is the heart of the TCAS II system.
It complies with the dimensional standard in ARINC 600 for 6 MCU form
factor.
It is compatible with ARINC 600 forced air cooling.
It ensures two main functions:
EFF :
ALL 34-43-00
Page 13
Nov 01/08
TAI
R TCAS Block Diagram - Maintenance and Display
R Figure 004A
R
EFF :
405-499, 34-43-00
Page 14
Nov 01/08
TAI
- a radio-electric transmission reception function in the L-band
frequency for intruder acquisition
- a processing function ensuring total operation control: digital,
discrete and analog-type interfaces, intruder trajectory computation
and tracking, visual and aural alert commands.
B. Directional Antennas
The TCAS has two antennas, one located on the top of the aircraft and the
other on the underside of the fuselage. These antennas, of the
transmit/receive type, provide azimuth information on aircraft located
within the TCAS surveillance range. They consist of four independent
elements. In reception, the amplitude of the signals received by each
element depends on the direction of the signal source, which permits the
relative bearing of the transmitting aircraft to be determined.
D. Associated Items
(2) Displays
Advisories are displayed by the Electronic Instrument System (EIS) by
high speed transmission of ARINC 429 messages on the buses linking
the TCAS to the DMCs 1 on one hand and to the DMC2 on the other hand.
Depending on the EFIS DMC selection, the DMC 3 receives either the
TA/RA display bus 1 (CAPT3/NORM positions) or the TA/RA display bus 2
(FO3 position). The FWCs connected in parallel on these buses monitor
the validity of the information.
The NDs provide indications on the location of intruders in the
traffic area. The PFDs provide the flight crew with vertical speed
correction information to avoid them.
R
EFF :
ALL 34-43-00
Page 15
Nov 01/08
TAI
The ECAM system also presents warning messages.
E. Peripherals
The TCAS receives information from the following equipment:
R
EFF :
234-299, 405-499, 34-43-00
Page 16
Nov 01/08
TAI
(7) Flight Data Interface Unit (FDIU)
The FDIU receives TCAS data from the DMC.
The following parameters are recorded by the FDIU:
- RA related information (label 270):
* advisory rate to maintain
* combined control
* vertical control
* up advisory
* down advisory
- manual sensitivity level (SL 0, 1, 2)
- TA issued or not.
R
EFF :
234-299, 405-499, 34-43-00
Page 17
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-233, 301-399,
R 401-404,
Post SB 34-1060 For A/C 053-099,
Post SB 34-1079 For A/C 053-099,
Post SB 34-1113 For A/C 053-099,
Post SB 34-1206 For A/C 053-099,
D. Associated Items
(2) Displays
Advisories are displayed by the Electronic Instrument System (EIS) by
high speed transmission of ARINC 429 messages on the buses linking
the TCAS to the DMCs 1 on one hand and to the DMC2 on the other hand.
Depending on the EFIS DMC selection, the DMC 3 receives either the
TA/RA display bus 1 (CAPT3/NORM positions) or the TA/RA display bus 2
(FO3 position). The FWCs connected in parallel on these buses monitor
the validity of the information.
The NDs provide indications on the location of intruders in the
traffic area. The PFDs provide the flight crew with vertical speed
correction information to avoid them.
The ECAM system also presents warning messages.
E. Peripherals
The TCAS receives information from the following equipment:
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page 18
Nov 01/08
TAI
(3) Inertial reference system
The TCAS is linked by a high speed ARINC 429 bus to the aircraft
ADIRU1 which supplies it with magnetic heading and pitch and roll
attitude information.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page 19
Nov 01/08
TAI
- aircraft altitude limit, configured at 48,000 ft informs the TCAS
computer that it must inhibit climb orders above this altitude.
4. Power
____________
Supply
The TCAS is supplied with 115VAC, 100 watt power rating. The ATC/TCAS
control unit, common to the transponders and the TCAS, is also supplied with
115VAC:
- the 115VAC BUS1 101XP supplies the TCAS via circuit breaker 4SG
- the 115VAC SHED ESS BUS 801XP supplies the ATC1 system via circuit breaker
5SH1
- the 115VAC BUS2 204XP supplies the ATC2 system via circuit breaker 5SH2.
The ATC/TCAS control unit is energized through the two circuit breakers
5SH1 and 5SH2.
The system is supplied through these circuit breakers:
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU COM NAV/ATC/1 5SH1 G11
121VU COM NAV/ATC/2 5SH2 K07
5. _____________________
Component Description
R
EFF :
ALL 34-43-00
Page 20
Nov 01/08
TAI
**ON A/C 001-050,
A. TCAS Computer
(1) Introduction
The TCAS computer is divided into four major sections:
- Radio Frequency section (RF Assembly A6)
- Signal Processor (A4)
- Central Processing Unit (CPU A3)
- Input/Output Processor (I/O A2)
(a) General
The RF section consists of receiver, transmitter and RF switch
portions.
The receiver processes the raw ATCRBS or Mode S intruder reply
data received from either the top or bottom antenna. The
transmitter portion of the RF section interrogates intruders once
per second, also using either antenna.
The RF switch portion selects the antenna (top or bottom) for the
transmission and reception of the TCAS signals.
For ATCRBS intruders, interrrogations are accomplished by
controlling a whisper shout attenuation system which provides
successive responses, starting with the nearest aircraft and
continuing progressively to those farther away so as to avoid
saturating the radio-electric space and resulting interference.
(b) Description
1
_ Transmitter
The transmitter is a solid-state circuit that develops 1030
MHz outputs. The TCAS transmitter/receiver has a
transmit/listen cycle of approximately 1 s intervals. A series
of increasing power mode C interrogations is first
transmitted. This is the whisper-shout sequence (4-pulse group
repeated with increasing power to 20 dB at 1 ms intervals).
Immediately following is a mode S interrogation modulated in
DPSK (Data Phase Shift Keyed) format. The remainder of the
1s-cycle is spent in listen mode.
R
EFF :
001-050, 34-43-00
Page 21
Nov 01/08
TAI
TCAS Computer
Figure 005
R
EFF :
001-050, 201-203, 34-43-00
Page 22
Nov 01/08
TAI
TCAS Computer
Figure 005A
R
EFF :
ALL 34-43-00
Page 23
Nov 01/08
TAI
After the whisper shout attenuator, the signal is fed through
diplexers, beam-steering networks and top/bottom antenna
switch. The beam-steering network generates and controls the
phase relationships of the four RF outputs from the
transmitter. These outputs are connected to the four elements
of the TCAS antenna.
2
_ Receiver
The receiver has four individual RF and IF sections, one for
each directional antenna segment. The receive frequency is
1090 MHz. The signal received from each antenna element is
passed through one of the four parallel top/bottom antenna
switches, beam-steering networks, transmit/receive switches,
then to four identical receiver RF circuits. These four
signals are further applied to mixer circuits to develop IF
signals (the local oscillator frequency used by the mixers is
1030 MHz from the transmitter sub-assembly). These IF signals
are amplified, filtered and applied to splitters for output to
the video processor.
3
_ Video processor
One output from each of the four signal splitters is
recombined and output as a video signal. This signal is used
to detect mode C and mode S data pulses. These items of
information are checked and invalid pulses eliminated so the
outputs of the video processor are mode C and mode S data. The
output from each signal splitter is applied to the bearing
detector.
4
_ Bearing detector
One of the IF signals is applied to one limiter as a reference
signal. Outputs of two other limiters are mixed with the
reference signal for phase detection. The resulting phase
detector outputs are dc signals whose levels are directly
proportional to the angle of arrival of the RF signal at the
antenna.
R
EFF :
001-050, 34-43-00
Page 24
Nov 01/08
TAI
R **ON A/C 053-099, 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
A. TCAS Computer
(1) Introduction
The TCAS computer is divided into five major sections:
- a receiver (A5)
- a transmitter (A6)
- an Input/Output (I/O) module (A4)
- two Central Processing Units (CPU) (A2, A3)
- a power supply unit (A1)
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-43-00
Page 25
Nov 01/08
TAI
TCAS Computer - Block Diagram
Figure 006
R
EFF :
ALL 34-43-00
Page 26
Nov 01/08
TAI
(2) Radio frequency section
(a) General
The RF section consists of a receiver, a transmitter and an I/O
module.
The receiver processes the raw ATCRBS or Mode S intruder reply
data received from either the top or the bottom antenna. The
transmitter portion of the RF section controls all interrogation,
it interrogates intruders once per second, also using either
antenna.
The I/O module is used to route signals to and from the antennas.
For ATCRBS intruders, interrogations are accomplished by
controlling a whisper-shout attenuation system which provides
successive responses, starting with the nearest aircraft and
continuing progressively to those farther away so as to avoid
saturating the radio-electric space and resulting interference.
(c) Transmitter
The transmitter controls all interrogations waveforms and power
levels.
It consists of both pulse and DPSK modulators, all power
amplification stages, high-power precision step attenuator
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-43-00
Page 27
Nov 01/08
TAI
(whisper-shout), as well as harmonic filter and spectrum filter,
and BITE power detection circuitry.
The L-band transmitter has a peak power output of 1.2 kW at 1030
MHz. The transmitter signal is amplified and a DPSK modulator is
also provided for Mode S interrogations.
This signal is divided into 4 in the proper phase relationship.
The modulator/driver provides power and control signals, it sends
discrete signals to the CPU which provides the correct pulse
width for modulation.
The final signal is increased up to 1500 W and it is fed into the
whisper-shout module. This module is a precision 27 step
attenuator (1 dB by step) which controls the power level.
The output is fed through the filters before it is driven to the
I/O module which applies the power to the appropriate antenna.
(d) Receiver
The receiver consists of 4 matched channels which provide very
accurate bearing information. Each receiver channel consists of a
single conversion receiver, high-quality logarithmic amplifier
and high-resolution A/D converter.
The receiver consists of 4 virtually identical receive channels
coupled to 2 separate digital video sections. Each receiver uses
a single conversion heterodyne circuit.
The preselector, included in each receiver, contains an L-band,
band pass filter which selects the 1090 MHz frequency band. It
provides selection of unwanted signals in excess of 60 dB outside
the 30 MHz bandwidth.
This signal is converted from 1090 MHz to 60 MHz.
The processed signal is applied to the logarithmic amplifier. The
logarithmic amplifier video output is fed to a video amplifier
where the actual magnitude of the slope and offset level is
controlled precisely.
This video signal is fed to the digital video circuit. This one
samples the analog video signal at an 8 MHz rate for mode S and
8.276 MHz for ATCRBS.
Each of the 2 digital video A/D converters selects the 2
strongest signals from the 4 receive channels.
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-43-00
Page 28
Nov 01/08
TAI
**ON A/C ALL
EFF :
ALL 34-43-00
Page 29
May 01/08
R
TAI
- Aural annunciation is provided through a speech synthesis processor
which contains speech data in ROM. Two outputs are provided with
program pin volume control selection.
- The interface to the RF modules is contained in 3 ASICs.
The pulse decoder ASIC accepts receiver data and performs basic
pulse detection of incoming replies. A reply decoder ASIC sends
processed replies to FIFO for processor retrieval. The CPU
initiates and controls the generation of ATCRBS and mode S
interrogations through the transmitter control ASIC. This ASIC also
provides CPU interface for the RF self-test capability.
Suppression pulse interface is provided by the transmitter control
ASIC. The pulse decoder ASIC checks the suppression bus for proper
transmit receive sequencing.
EFF :
ALL 34-43-00
Page 30
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-233, 301-399,
R 401-404,
Post SB 34-1060 For A/C 053-099,
Post SB 34-1079 For A/C 053-099,
Post SB 34-1113 For A/C 053-099,
Post SB 34-1206 For A/C 053-099,
C. TCAS Antennas
6. Operation
_________
EFF :
ALL 34-43-00
Page 31
Nov 01/08
TAI
TCAS Antenna
Figure 007
EFF :
ALL 34-43-00
Page 32
May 01/08
R
TAI
R **ON A/C 234-299, 405-499,
A. Intruder Detection
The TCAS detects A/C equipped with Mode S transponders by listening for
squitter transmissions. Mode S transponders announce their presence by
transmitting squitter messages once every second. The TCAS also detects
A/C equipped with transponders that do not reply to Mode S interrogations
but do reply to Mode C interrogations. The TCAS must actively search for
Mode C equipped intruder aircraft because Mode C transponders do not
transmit squitter messages. Once the presence of a Mode C intruder is
confirmed, it is tracked by the TCAS. The TCAS is capable of tracking up
to a combined total of 45 Mode S and Mode C intruders.
Tracking is performed by repetitive TCAS interrogations in Mode S and
Mode C format.
R
EFF :
234-299, 405-499, 34-43-00
Page 33
Nov 01/08
TAI
TCAS - Operation / Control and Indicating
Figure 008
EFF :
ALL 34-43-00
Page 34
May 01/08
R
TAI
TCAS - Mode C Only All-Call Interrogation
Figure 009
R
EFF :
ALL 34-43-00
Page 35
May 01/08
TAI
TCAS - Whisper-Shout Transmitter Sequence
Figure 010
EFF :
ALL 34-43-00
Page 36
May 01/08
R
TAI
(2) Replies of aircraft equipped with Mode A or Mode C transponders
Aircraft equipped with Mode C transponders reply by transmitting
their altitude, octal encoded in four digits ABCD, with a value of
100 ft for the LSB in the ATCRBS format.
For aircraft of which the Mode A and C transponders do not have the
altitude report, the intruder presentation on the ND is limited to a
display of its position in range and bearing.
(Ref. Fig. 011)
Aircraft equipped with Mode A transponders only cannot be detected by
the TCAS.
A. Intruder Detection
The TCAS detects A/C equipped with Mode S transponders by listening for
squitter transmissions. Mode S transponders announce their presence by
transmitting squitter messages once every second. The TCAS also detects
A/C equipped with transponders that do not reply to Mode S interrogations
but do reply to Mode C interrogations. The TCAS must actively search for
Mode C equipped intruder aircraft because Mode C transponders do not
transmit squitter messages. Once the presence of a Mode C intruder is
confirmed, it is tracked by the TCAS. The TCAS is capable of tracking up
to a combined total of 30 Mode S and Mode C intruders.
Tracking is performed by repetitive TCAS interrogations in Mode S and
Mode C format.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-43-00
Page 37
Nov 01/08
TAI
TCAS - Mode C Reply
Figure 011
EFF :
ALL 34-43-00
Page 38
May 01/08
R
TAI
The first transmission consists of relatively low power P1, P3 and P4
pulses only.
Therefore, only the nearest aircraft will receive and reply to these
interrogations.
Then an S1 pulse is also transmitted. This pulse is at a lower
amplitude, causing the close-in aircraft to interpret this as a side
lobe from the transmitting station, requiring no reply. The purpose
of the whisper-shout sequence is to reduce the number of aircraft
replying to any one interrogation, thus limiting interference.
EFF :
ALL 34-43-00
Page 39
May 01/08
R
TAI
- all Mode S interrogations (UPLINK format) are binary
differential phase shift keying (DPSK) signals
- Mode S replies (DOWNLINK format) are formed by pulse position
modulation (PPM) encoding the reply data.
(Ref. Fig. 012)
The Mode S reply is preceded by a preamble containing four
pulses of specific duration and intervals intended to guarantee
received message validity. Any messages whose preamble is not
in complete conformity with the model are rejected by the TCAS.
This information is encoded in PPM mode with, for each bit, a
logic level one if the first half of the interval is at 1 and a
logic level zero if it is at zero.
(b) Squitters
The Mode S transponder participates actively in its own detection
by transmitting signals, at one second intervals, intended to
inform nearby aircraft of its presence.
This transmission, called squitter transmission, consists of a
Format DF = 11 message, containing the Mode S 24-bit address
assigned to the aircraft, whereas all the bits of the message PI
field at zero indicates a squitter.
EFF :
ALL 34-43-00
Page 40
Nov 01/08
TAI
TCAS - Mode S - Interrogation and Reply
Figure 012
EFF :
ALL 34-43-00
Page 41
May 01/08
R
TAI
The TCAS uses this bidirectional link capability to communicate
with other TCAS equipped aircraft to coordinate avoidance
maneuvers. It may also dialog with ground stations: these
stations have the possibility of monitoring and modifying its
action.
In the Mode S message set, the TCAS uses only six UF-type
messages and eight DF-type messages. These messages are:
- UF0, UF4, UF5, UF16, UF20, UF21
- DF0, DF4, DF5, DF11, DF16, DF17, DF20, DF21.
The following two figures give the list of messages used by the
TCAS for communications with other aircraft and with ground
stations.
They are followed by the definition of the fields used in the
messages.
R
EFF :
234-299, 405-499, 34-43-00
Page 42
Nov 01/08
TAI
TCAS - Message Uplink Format
Figure 013
R
EFF :
ALL 34-43-00
Page 43
May 01/08
TAI
TCAS - Message Downlink Format
Figure 014
R
EFF :
234-299, 405-499, 34-43-00
Page 44
Nov 01/08
TAI
DEFINITION OF UPLINK FORMAT MESSAGE FIELDS
-------------------------------------------------------------------------------
| DESIGNATOR | FIELD | INDICATION |
|-------------|----------------|----------------------------------------------|
| AP | ADDRESS PARITY | Coded address with parity check |
| AQ | ACQUISITION | Indicates if it is an interrogation message; |
| | | 1 = interrogation |
| DI | DESIGNATOR | Specifies type of information contained in SD|
| | IDENT | field |
| MA | MESSAGE | Used by ground station to transmit a TCAS SL |
| | Comm-A | command to a TCAS-equipped aircraft |
| MU | MESSAGE | Used by TCAS to transmit to other aircraft RA|
| | Comm-U | coordination information (under fields UDS, |
| | | MTB, CVC, VRC, CHC, HRC, HSB, VSB) |
| PC | PROTOCOL | Operating commands to the transponder |
| RL | REPLY LENGTH | Indicates if message is short (0) or long (1)|
| RR | REPLY REQUEST | Length and content of reply information |
| | | requested by the interrogator |
| SD | SPECIAL | Contains control codes affecting the |
| | DESIGNATOR | transponder protocol |
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
| DESIGNATOR | FIELD | INDICATION |
|-------------|----------------|----------------------------------------------|
| AA | ADDRESS | Mode S address in the clear in 24 bits |
| | ANNOUNCED | |
| AC | ALTITUDE CODE | Information indicating aircraft altitude |
| AP | ADDRESS PARITY | Coded address with parity check |
| CA | CAPABILITY | Transponder capability |
| DR | DOWNLINK | Requests extraction of downlink message by |
| | REQUEST | the interrogator (existing RA) |
| FS | FLIGHT STATUS | Flight status of the aircraft: ground, |
| | | flight, alert, SPI |
| ID | IDENTIFICATION | Contains the Mode A identification code |
| | CODE | |
| MB | MESSAGE | Indicates Advisory content to the ground |
| | Comm-B | station |
| MV | MESSAGE | Contains ARA, RAC, VDS subfields used for |
| | Comm-V | coordination |
| RI | REPLY | Type of reply and airspeed capability |
| | INFORMATION | |
| SL | SENSITIVITY | TCAS current sensitivity level |
| | LEVEL | |
R
EFF :
234-299, 405-499, 34-43-00
Page 45
Nov 01/08
TAI
-------------------------------------------------------------------------------
| DESIGNATOR | FIELD | INDICATION |
|-------------|----------------|----------------------------------------------|
| UM | UTILITY MESSAGE| Transponder status readouts |
| VS | VERTICAL STATUS| Aircraft status: 0 = airborne, 1 = ground |
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-43-00
Page 46
Nov 01/08
TAI
NOTE : The TCAS only uses short messages (56 bits).
____
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page 47
Nov 01/08
TAI
TCAS - Message Downlink Format
Figure 014A
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page 48
Nov 01/08
TAI
DEFINITION OF UPLINK FORMAT MESSAGE FIELDS
-------------------------------------------------------------------------------
| DESIGNATOR | FIELD | INDICATION |
|-------------|----------------|----------------------------------------------|
| AP | ADDRESS PARITY | Coded address with parity check |
| AQ | ACQUISITION | Indicates if it is an interrogation message; |
| | | 1 = interrogation |
| DI | DESIGNATOR | Specifies type of information contained in SD|
| | IDENT | field |
| MA | MESSAGE | Used by ground station to transmit a TCAS SL |
| | Comm-A | command to a TCAS-equipped aircraft |
| MU | MESSAGE | Used by TCAS to transmit to other aircraft RA|
| | Comm-U | coordination information (under fields UDS, |
| | | MTB, CVC, VRC, CHC, HRC, HSB, VSB) |
| PC | PROTOCOL | Operating commands to the transponder |
| RL | REPLY LENGTH | Indicates if message is short (0) or long (1)|
| RR | REPLY REQUEST | Length and content of reply information |
| | | requested by the interrogator |
| SD | SPECIAL | Contains control codes affecting the |
| | DESIGNATOR | transponder protocol |
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
| DESIGNATOR | FIELD | INDICATION |
|-------------|----------------|----------------------------------------------|
| AA | ADDRESS | Mode S address in the clear in 24 bits |
| | ANNOUNCED | |
| AC | ALTITUDE CODE | Information indicating aircraft altitude |
| AP | ADDRESS PARITY | Coded address with parity check |
| CA | CAPABILITY | Transponder capability |
| DR | DOWNLINK | Requests extraction of downlink message by |
| | REQUEST | the interrogator (existing RA) |
| FS | FLIGHT STATUS | Flight status of the aircraft: ground, |
| | | flight, alert, SPI |
| ID | IDENTIFICATION | Contains the Mode A identification code |
| | CODE | |
| MB | MESSAGE | Indicates Advisory content to the ground |
| | Comm-B | station |
| MV | MESSAGE | Contains ARA, RAC, VDS subfields used for |
| | Comm-V | coordination |
| RI | REPLY | Type of reply and airspeed capability |
| | INFORMATION | |
| SL | SENSITIVITY | TCAS current sensitivity level |
| | LEVEL | |
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page 49
Nov 01/08
TAI
-------------------------------------------------------------------------------
| DESIGNATOR | FIELD | INDICATION |
|-------------|----------------|----------------------------------------------|
| UM | UTILITY MESSAGE| Transponder status readouts |
| VS | VERTICAL STATUS| Aircraft status: 0 = airborne, 1 = ground |
-------------------------------------------------------------------------------
(1) Principle
EFF :
ALL 34-43-00
Page 50
May 01/08
R
TAI
TCAS - Relative Altitude Calculation Principle
Figure 015
EFF :
ALL 34-43-00
Page 51
May 01/08
R
TAI
The bearing angle of a target is determined by the amplitude
ratio of adjacent patterns.
The TCAS takes a ratio of the amplitude of the two strongest
signals from two 90-degree antenna beams to determine a bearing
angle.
This technique also prevents a bearing measurement from being
reflected into a wrong quadrant. Because an amplitude ratio is
used, distortions in the antenna patterns tend to be cancelled
out.
When transmitting, the TCAS computer interrogates one sector at a
time using a whisper-shout sequence of stepped power level
interrogations.
(d) Tracking
Once identified, the intruders are tracked by a series of
interrogation-replies in Mode C only all-call for Mode C
transponder-equipped aircraft, and in Mode S for Mode S
transponder-equipped aircraft.
These exchanges permit the TCAS to periodically update the
altitude, range and bearing data for each intruder and to compute
the range rate and altitude rate variations. These data are then
used to determine the time separating the two aircraft from their
closest point of approach.
EFF :
ALL 34-43-00
Page 52
May 01/08
R
TAI
are at a frequency of 1090 MHz to the TCAS receiver. This choice
allows system compatibility with ground station-transponder links
as the ground stations use the same frequencies as the TCAS.
C. Coordination
Two TCAS-equipped aircraft must coordinate their maneuvers to avoid the
flight path corrections ordered by each TCAS resulting in a hazardous
situation.
EFF :
ALL 34-43-00
Page 53
May 01/08
R
TAI
TCAS - Communication Principle
Figure 016
EFF :
ALL 34-43-00
Page 54
May 01/08
R
TAI
(b) Surveillance phase
After detection, a surveillance phase starts. This phase is
composed of an acquisition part and a tracking part.
1
_ Acquisition interrogation
When the TCAS receives a squitter and acquires the Mode S
address of the intruder it enters into contact by transmitting
a UFO-type message (Short special surveillance interrogation)
with the following specific fields:
- bit 9, RL = 0: reply message length requested short (56
bits)
- bit 14, AQ = 1: acquisition-type message indication.
2
_ Acquisition reply
The intruders transponder replies to this request by a DFO
message containing the following information:
- bit 6, VS: Vertical Status, = 1 if the aircraft is on the
ground, = 0 if the aircraft is airborne
- bits 9 to 11, SL: Sensitivity level indicates in which
sensitivity level its TCAS is operating
- bits 14 to 17, RI: combinations of bits, from values 8 to
15, specify the maximum speed the aircraft can reach. The
other combinations are not used
- bits 20 to 32, AC: aircraft altitude code indicating the
barometric altitude.
3
_ Tracking interrogation
After its acquisition, the intruder is tracked by UFO-type
interrogations with the following field values:
- RL = 0: reply message length requested short
- AQ = 0: not an acquisition message.
4
_ Tracking reply
The intruders transponder replies with a DFO message
indicating altitude and TCAS sensitivity level by a
combination of fields SL and RI:
- SL: bits 9 to 11
- RI: bits 14 to 17, combination values 0 to 7. Values 8 to 15
are not used
- AC: bits 20 to 32, aircraft altitude code.
EFF :
ALL 34-43-00
Page 55
May 01/08
R
TAI
1
_ Coordination interrogation
The TCAS transmits a UF16 Long Special Surveillance message
whose fields contain the following indications:
---------------------------------------------------------------------
| BITS | FIELD | INDICATION |
|-------|--------|--------------------------------------------------|
| 9 | RL | = 1: reply message length requested long |
| 14 | AQ | = 0: non-acquisition type interrogation |
| 33-40 | UDS | U Definition Subfield - defines the other data |
| | | in the MU field (Comm-U), composed of bits 42 |
| | | to 88 |
| 42 | MTB | Indicates multiple threat processing |
| 43-44 | CVC | Cancel Vertical resolution advisory Complement - |
| | | used to cancel an RA complement sent earlier to |
| | | an intruder |
| 45-46 | VRC | Vertical Resolution advisory Complement - used to|
| | | transmit an RA vertical complement to the intru- |
| | | der requesting it not to modify its trajectory |
| | | (dont climb, dont descend) |
| 47-49 | CHC | Cancel Horizontal resolution advisory Complement-|
| | | not used in TCAS II |
| 50-52 | HRC | Horizontal Resolution advisory Complement - not |
| | | used in TCAS II |
| 53-55 | | not used |
| 56-60 | HSB | Encoded Sense bits for Horizontal resolution |
| | | advisory complement - not used in TCAS II |
| 61-64 | VSB | Encoded Sense Bits for Vertical resolution advi- |
| | | sory complement - parity code to protect the 4 |
| | | vertical command bits (43-46) |
| 65-88 | MID | Interrogator TCAS-equipped aircraft Mode S |
| | | address. |
---------------------------------------------------------------------
2
_ Coordination reply
After acquisition of this message, the intruders transponder
replies with a Long Special Surveillance DF 16 type message,
containing the information previously transmitted to it by its
own TCAS:
EFF :
ALL 34-43-00
Page 56
May 01/08
R
TAI
---------------------------------------------------------------------
| BITS | FIELD | INDICATION |
|------ |-------|---------------------------------------------------|
| 6 | VS | Vertical Status - indicates whether aircraft is |
| | | on ground or airborne |
| 9-11 | SL | With RI, SL indicates the sensitivity level at |
| | | which the interrogated aircrafts TCAS is |
| | | operating |
| 14-17 | RI | Reply Information |
| 20-32 | AC | Altitude Code - contains aircraft altitude |
| | | encoded in 100 ft increments if bit 28 equals 0, |
| | | and in 25 ft increments if bit 28 equals 1 |
| 33-40 | VDS | V Definition Subfield defines the contents of the|
| | | data and coding in the field MV (Comm V) composed|
| | | of bits 41 to 88 |
| 41-54 | ARA | Active Resolution Advisory - indicates the RA |
| | | type currently generated by the TCAS |
| 55-58 | RAC | Resolution Advisory Complement - Indicates the RA|
| | | complement type currently received from other |
| | | TCAS-equipped aircraft |
| 59-88 | | Not used |
---------------------------------------------------------------------
---------------------------------------------------
| 1 - TRANSPONDER TO TCAS |
|-------------------------------------------------|
| | RADIO MESSAGE | ARINC MESSAGE |
|---------|-------------------|-------------------|
| FIELD | MESSAGE | BITS | LABEL | BITS |
|---------|---------|---------|---------|---------|
| MTB | UF16 | 42 | 271 | 09 |
| CVC | | 43-44 | | 10-11 |
| VRC | | 45-46 | | 12-13 |
| CHC | | 47-49 | | 14-16 |
| HRC | | 50-52 | | 17-19 |
| HSB | | 56-60 | | 20-24 |
| VSB | | 61-64 | | 25-28 |
---------------------------------------------------
EFF :
ALL 34-43-00
Page 57
May 01/08
R
TAI
---------------------------------------------------
| 2 - TCAS TO TRANSPONDER |
|-------------------------------------------------|
| | RADIO MESSAGE | ARINC MESSAGE |
|---------|-------------------|-------------------|
| FIELD | MESSAGE | BITS | LABEL | BITS |
|---------|---------|---------|---------|---------|
| SL | DF16 | 09-11 | 274 | 23-25 |
| RI | | 14-17 | | 26-29 |
| ARA | | 41-54 | 273 | 12-25 |
| RAC | | 55-58 | | 26-29 |
---------------------------------------------------
D. Principles of Computation
In the TCAS, target aircraft are categorized depending on specific
criteria varying in function of altitude.
The TCAS essentially uses two types of information to perform this
classification:
- the relative altitude between two aircraft, known by the difference of
their barometric altitudes
- the distance or range separating them.
(Ref. Fig. 017)
Acquisition of these two parameters at regular intervals (tracking)
enables their variations to be calculated:
- altitude rate
- range rate.
Assessment of the potential threat represented by an intruder depends
on two criteria determined with respect to a point in the traffic area
called Closest Point of Approach (CPA).
This is the point of minimum distance between the two aircraft,
assuming that their trajectories do not deviate.
The two criteria are:
- vertical separation at CPA
- time left before reaching CPA.
EFF :
ALL 34-43-00
Page 58
May 01/08
R
TAI
TCAS - Definition of Main Parameters
Figure 017
EFF :
ALL 34-43-00
Page 59
May 01/08
R
TAI
TCAS - Threat Evaluation
Figure 018
EFF :
ALL 34-43-00
Page 60
May 01/08
R
TAI
However, when intruder 2 reaches CPA it is still inside this zone and
therefore an advisory will be issued.
EFF :
ALL 34-43-00
Page 61
Nov 01/08
TAI
TCAS - TAU Minimum Configuration
Figure 019
R
EFF :
ALL 34-43-00
Page 62
May 01/08
TAI
TCAS - TAU Curve
Figure 020
R
EFF :
ALL 34-43-00
Page 63
May 01/08
TAI
range - X (DMOD) to the power two
TAU = ---------- with X = ---------
range rate range
This formula represents an estimate of the time the aircraft would
take to penetrate a sphere around the intruder with a radius equal to
(DMOD)expnt2/range. The DMOD coefficients are in function of
altitude, ranging from 0.20 NM for 1000-2350 ft, to 1.1 NM above
30,000 ft as shown below (for the RA DMOD):
Altitude DMOD TA DMOD RA
(ft) (NM) (NM)
0-1000 0.30 -
1000-2350 0.33 0.20
2350-5000 0.48 0.35
5000-10000 0.75 0.55
10,000-20,000 1.0 0.80
>20,000 1.3 1.1
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-43-00
Page 64
Nov 01/08
TAI
(Ref. Fig. 019, 020)
The curve represents the TAU variation before the closest point of
approach.
(Ref. Fig. 020)
This time decreases as the range decreases, reaches a minimum when
the intruders relative bearing is 45 deg. and then increases
rapidly. If the time corresponding to a predetermined threshold has
not been reached before the minimum TAU value, a trajectory
correction is not initiated.
Certain conditions exist, however, in which this formula may prove
insufficient. This may arise for example when two aircraft fly in the
same direction with a very low closure rate. In this case, the
range/range rate ratio gives a high TAU value whereas in fact, the
two aircraft could be very near.
The TCAS uses a slightly different formula to preclude this
situation:
range - X (DMOD) to the power two
TAU = ---------- with X = ---------
range rate range
This formula represents an estimate of the time the aircraft would
take to penetrate a sphere around the intruder with a radius equal to
(DMOD)expnt2/range. The DMOD coefficients are in function of
altitude, ranging from 0.20 NM for 1000-2350 ft, to 1.1 NM above
20,000 ft as shown below:
Altitude DMOD
(ft) (NM)
0-1000
1000-2350 0.20
2350-5000 0.35
5000-10000 0.55
10000-20000 0.80
more than 20000 1.1
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page 65
Nov 01/08
TAI
Their presentation on the ND is permanent (TFC function selected =
full time display function activated) or conditioned by the
presence of a TA/RA intruder (TA or TA/RA function selected).
Depending on their trajectory, they may:
- conserve this status and move away without an advisory being
declared.
In this case the pilot is informed of their presence on the ND by a
white outlined diamond symbol and can monitor their progress, or
- have a trajectory liable to lead to a conflict situation and in
this case they require a new category and a symbol change.
EFF :
001-050, 201-203, 301-304, 34-43-00
Page 66
May 01/08
R
TAI
TCAS - Threat Threshold Scale
Figure 021
R
EFF :
ALL 34-43-00
Page 67
May 01/08
TAI
Depending on its trajectory, an intruder may conserve this status and
move away, or it may become a collision threat. In this case
avoidance maneuvers are suggested to the pilot via a resolution
advisory.
R
EFF :
001-050, 201-203, 301-304, 34-43-00
Page 68
May 01/08
TAI
R **ON A/C ALL
NOTE : Since the Display Management Computers (DMC) do not sort the OTHER
____
intruders, the latter are not presented on the NDs. Their
presentation is optional. It is activated by pin programming and
replacement of ATC/TCAS control unit (ALL TRAFFIC configuration).
R
EFF :
ALL 34-43-00
Page 69
Aug 01/08
TAI
(3) Traffic advisory aircraft
EFF :
ALL 34-43-00
Page 70
Nov 01/08
TAI
**ON A/C ALL
EFF :
ALL 34-43-00
Page 71
Nov 01/08
TAI
**ON A/C 001-050, 201-203, 301-304,
R
EFF :
001-050, 201-203, 301-304, 34-43-00
Page 72
May 01/08
TAI
This message is spoken only once if softening from a previous
corrective advisory,
- CLEAR OF CONFLICT
Indicates that separation has been achieved and range has
started to increase.
- CLIMB, CLIMB:
Climb at the rate shown by the green sector on the PFD (1500
ft/min),
- DESCEND, DESCEND:
Descend at the rate indicated by the green sector on the PFD
(-1500 ft/min),
R
EFF :
ALL 34-43-00
Page 73
Aug 01/08
TAI
Follows a descend advisory. The vertical speed of the descent
should be increased (-2500 ft/min),
- CLEAR OF CONFLICT:
Indicates that separation has been achieved and range has
started to increase.
R
EFF :
ALL 34-43-00
Page 74
Aug 01/08
TAI
(a) Low altitude inhibitions
Ground proximity leads to the inhibition of those advisories
liable to cause a hazardous situation at this level. In
decreasing altitude, these are:
- below 1450 ft above ground level (AGL) inhibition of Increase
Descend resolution advisories (RA)
- below 1200 ft AGL at take-off and 1000 ft AGL in approach,
inhibition of Descend resolution advisories (RA)
- below 1000 +/- 100 ft (11,000 ft in climb, 900 ft in descent)
inhibition of all resolution advisories (RA) and inhibition of
aural traffic advisories (TA)
R
EFF :
001-050, 201-203, 301-304, 34-43-00
Page 75
May 01/08
TAI
TCAS - Inhibition Condition
Figure 022
R
EFF :
ALL 34-43-00
Page 76
May 01/08
TAI
Z i/s =
Z t/s -(Z t/m - Z i/m)
where: Z i/s =
height of intruder above ground level
Z i/m =
altitude of intruder above sea level
Z t/s =
height of TCAS above ground level measured
by radio altimeter
Z t/m = altitude of TCAS above sea level measured
by ADIRU.
R
EFF :
405-499,
001-050, 201-203, 234-299, 301-304, 34-43-00
Page 77
Nov 01/08
TAI
(d) Rejection of signals from aircraft on ground
(Ref. Fig. 022)
Aircraft on the ground may reply to TCAS interrogations,
producing an unnecessary overload in the processing and display
of information. The ground logic aircraft declared on the
ground is enabled when the own aircraft descends below 1650 ft
AGL and when it climbs up to 1750 ft AGL (1700 +/- 50 ft.).
Intruders are declared to be on-ground if they are within 360 ft
from the ground when descending, and if they are within 400 ft
from the ground when climbing (380 +/- 20 ft.).
All on-ground intruders are displayed as non-threat traffic
(white unfilled diamond).
Intruders declared to be on-ground can never cause proximate,
traffic or resolution advisory (TA, RA).
But, as the altitude transmitted by the intruder is a barometric
altitude with respect to sea level, the TCAS shall process this
value to convert it into height above ground level in order to
compare it with the 380 ft (plus or minus 20 ft) threshold.
In the figure, the intruders height above ground level can be
deduced:
Z i/s = Z t/s -(Z t/m - Z i/m)
where: Z i/s = height of intruder above ground level
Z i/m = altitude of intruder above sea level
Z t/s = height of TCAS above ground level measured
by radio altimeter
Z t/m = altitude of TCAS above sea level measured
by ADIRU.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-43-00
Page 78
Nov 01/08
TAI
(a) Low altitude inhibitions
Ground proximity leads to the inhibition of those advisories
liable to cause a hazardous situation at this level. In
decreasing altitude, these are:
- below 1550 +/- 100 ft above ground level (AGL) inhibition of
Increase Descend resolution advisories (RA),
- below 1100 +/- 100 ft AGL, inhibition of Descend resolution
advisories (RA),
- below 1000 ft +/- 100 ft AGL, TCAS automatic switching to TA
Only mode (inhibition of all resolution advisories),
- below 500 +/- 100 ft AGL (600 ft in climb, 400 ft in descent),
inhibition of all resolution advisories (RA) and of aural
traffic advisories (TA).
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page 79
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-233, 301-399,
R 401-404,
Post SB 34-1060 For A/C 053-099,
Post SB 34-1079 For A/C 053-099,
Post SB 34-1113 For A/C 001-050,053-099,
Post SB 34-1206 For A/C 001-050,053-099,201-203,301-304,
F. Sensitivity Level
The notion of sensitivity level is very important in the TCAS as many of
the operating modes depend on it.
The TCAS separates the surrounding airspace into altitude layers. A
different Sensitivity Level (SL) threshold for issuing advisories is
applied to each altitude layer.
The sensitivity level is decreased at low altitude to prevent unnecessary
advisories in higher traffic densities such as terminal areas.
Generally, the level is determined automatically by the TCAS in function
of:
- altitude values from the radio altimeter up to 2500 ft AGL
- barometric altitude values in the 2500 ft to 48,000 ft range. TAU
values corresponding to each sensitivity level indicate the TA and RA
thresholds. The vertical separation thresholds at CPA also vary in
function of the sensitivity level for the different types of advisory.
The following table summarizes these data:
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page 80
Nov 01/08
TAI
----------------------------------------------------------------------
| | TAU thresholds | Vertical separation |
| | | thresholds |
|----------------------------|-----------------|---------------------|
| Source | Altitude | SL TA RA | S0 S1 S2 |
| Altitude | | | TA RA RA |
| | | | prev cor |
| | | (sec) (sec) | (ft) (ft) (ft) |
|------------|---------------|-----------------|---------------------|
| Radio Alt |less than 1000 | 2 20 | 850 |
| Radio Alt | 1000-2350 | 3 25 15 | 850 600 300 |
| Baro | 2350-5000 | 4 30 20 | 850 600 300 |
| Baro | 5000-10000 | 5 40 25 | 850 600 350 |
| Baro | 10000-20000 | 6 45 30 | 850 600 400 |
| Baro | 20000-30000 | 7 48 35 | 850 700 600 |
| Baro |more than 30000| 7 48 35 | 1200 800 700 |
----------------------------------------------------------------------
NOTE : This table shows the sensitivity levels based on the TCAS
____
altitude. There is an hysteresis when switching from a sensitivity
level to another one: 1000 +/- 100 ft; 2350 +/- 200 ft; 5000 +/-
500 ft; 10,000 +/- 500 ft; 20,000 +/- 500 ft; 30,000 +/- 500 ft.
for example: switching from SL3 to SL2 is performed at 900 ft and
switching from SL2 to SL3 at 1100 ft.
R
EFF :
001-050, 201-203, 301-304, 34-43-00
Page 81
May 01/08
TAI
TCAS - Separation into Altitude Layers
Figure 023
R
EFF :
001-050, 201-203, 301-304, 34-43-00
Page 82
May 01/08
TAI
First a sensitivity level based on altitude is selected. Level 2 is
selected if the radio altimeter altitude is less than 1000 ft. Level 2
is also selected if own aircraft is configured such that both CLIMB and
DESCEND RAs are inhibited (e.g., below 1000 ft AGL with insufficient
climb performance). Level 3 is selected if the aircraft is above 1000
ft and below 2350 ft AGL. Level 4 is selected if the aircraft is above
2350 ft and below 5000 ft AGL. Level 3 is the least sensitive of the
levels selected automatically by the TCAS; in fact in this altitude
layer, the numerous inhibitions reduce the appearance of RA. If the
aircraft is above 2500 ft AGL, barometric altitude is used to select
either level 4 (from 2350 to 5000 ft), 5 (from 5000 to 10,000 ft), 6
(from 10,000 to 20,000 ft) and 7 (above 20,000 ft).
NOTE : Intruders which do not report their altitude are not displayed
____
above 15,500 ft.
ATC/TCAS control unit input is read by the TCAS computer. If the pilot
has selected Automatic Mode (TA/RA), then the altitude-based sensivity
level is used in comparisons to determine the final level.
From all sensitivity level commands, if any, received from ground
stations, the lowest is selected.
If the TA ONLY mode is selected, either manually via the control unit or
by a ground station, the altitude-based sensitivity level is used for TA
thresholds and the RAs are inhibited. Otherwise, the lowest of all inputs
is chosen.
F. Sensitivity Level
The notion of Sensitivity Level (SL) is very important in the TCAS as
many of the operating modes depend on it.
The TCAS separates the surrounding airspace into altitude layers. A
different sensitivity level threshold for issuing advisories is applied
to each altitude layer.
The sensitivity level is decreased at low altitude to prevent unnecessary
advisories in higher traffic densities such as terminal areas.
Generally, the level is determined automatically by the TCAS in function
of:
- altitude values from the radio altimeter up to 2500 ft AGL
- barometric altitude values in the 2500 ft to 48,000 ft range. TAU
values corresponding to each sensitivity level indicate the TA and RA
R
EFF :
ALL 34-43-00
Page 83
Aug 01/08
TAI
thresholds. The vertical separation thresholds at CPA also vary in
function of the sensitivity level for the different types of advisory.
The following table summarizes these data:
----------------------------------------------------------------------
| | TAU thresholds | Vertical separation |
| | | thresholds |
|-----------------------------|----------------|---------------------|
| Source | Altitude | SL TA RA | S0 S1 S2 |
| Altitude | | | TA RA RA |
| | | | prev cor |
| | | (sec) (sec) | (ft) (ft) (ft) |
|------------|----------------|----------------|---------------------|
| Radio Alt |less than 1000 | 2 20 | 850 |
| Radio Alt | 1000-2350 | 3 25 15 | 850 600 300 |
| Baro | 2350-5000 | 4 30 20 | 850 600 300 |
| Baro | 5000-10,000 | 5 40 25 | 850 600 350 |
| Baro | 10,000-20,000 | 6 45 30 | 850 600 400 |
| Baro | 20,000-42,000 | 7 48 35 | 850 700 600 |
| Baro |more than 42,000| 7 48 35 | 1200 800 700 |
----------------------------------------------------------------------
NOTE : This table shows the sensitivity levels based on the TCAS
____
altitude. There is an hysteresis when switching from a sensitivity
level to another one:
- 1000 plus or minus 100 ft;
- 2350 plus or minus 200 ft;
- 5000 plus or minus 500 ft;
- 10,000 plus or minus 500 ft;
- 20,000 plus or minus 500 ft;
- 42,000 plus or minus 500 ft.
for example: switching from SL3 to SL2 is performed at 900 ft
and switching from SL2 to SL3 at 1100 ft.
Level 1 corresponds to Standby Mode in which no advisory is
generated.
(Ref. Fig. 023A)
There are two other means of modifying the sensitivity level:
- selecting TA only mode on the ATC/TCAS control unit forces level
2. In this case, intruders of all types are displayed but are
not transformed into RA symbols and no vertical speed
modification indications are issued.
- the ATC/Mode S-equipped ground stations may modify the
sensitivity level of the aircraft TCAS via the uplink without,
however, having the capability to force the Standby Mode. If
several ground stations command sensitivity levels, the TCAS
logic selects the lowest level.
Definition of priority logic:
R
EFF :
ALL 34-43-00
Page 84
Aug 01/08
TAI
TCAS - Separation into Altitude Layers
Figure 023A
R
EFF :
ALL 34-43-00
Page 85
Aug 01/08
TAI
First a sensitivity level based on altitude is selected. Level 2
is selected if the radio altimeter altitude is less than 1000
ft. Level 2 is also selected if own aircraft is configured such
that both CLIMB and DESCEND RAs are inhibited (e.g., below 1000
ft AGL with insufficient climb performance). Level 3 is selected
if the aircraft is above 1000 ft and below 2350 ft AGL. Level 4
is selected if the aircraft is above 2350 ft and below 5000 ft
AGL. Level 3 is the least sensitive of the levels selected
automatically by the TCAS; in fact in this altitude layer, the
numerous inhibitions reduce the appearance of RA. If the
aircraft is above 2500 ft AGL, barometric altitude is used to
select either level 4 (from 2350 to 5000 ft), 5 (from 5000 to
10,000 ft), 6 (from 10,000 to 20,000 ft) and 7 (above 20,000
ft).
NOTE : Intruders which do not report their altitude are not displayed
____
above 15,500 ft.
ATC/TCAS control unit input is read by the TCAS computer. If the pilot
has selected Automatic Mode (TA/RA), then the altitude-based sensivity
level is used in comparisons to determine the final level.
From all sensitivity level commands, if any, received from ground
stations, the lowest is selected.
If the TA ONLY mode is selected, either manually via the control unit or
by a ground station, the altitude-based sensitivity level is used for TA
thresholds and the RAs are inhibited. Otherwise, the lowest of all inputs
is chosen.
G. Information Display
The TCAS information is presented on the CAPT and F/O NDs of the EFIS
system. Additional messages can also be presented on the display units of
the ECAM system.
EFF :
ALL 34-43-00
Page 86
Nov 01/08
TAI
- two digits indicating their relative altitude in hundreds of feet
- a symbol indicating whether the intruder is above (+) or below (-)
the aircraft.
An arrow to the right of the symbol indicates the vertical trend of
the aircraft.
Targets are symbolized according to their type:
- OTHER TRAFFIC: white outlined diamond, height 7 mm
- PROXIMATE TRAFFIC: white filled diamond, height 7 mm
- TRAFFIC ADVISORY: amber filled circle, diameter 5 mm
- RESOLUTION ADVISORY: red filled square, side 5 mm.
The display only presents the eight most threatening intruders
(number determined through program pins on the TCAS computer).
The own aircraft is represented by the aircraft symbol at the
center of the dial in ROSE mode and at the lower quarter and at the
center of the image in ARC mode.
A white range ring with markings at each of the twelve clock
positions is placed around the own aircraft symbol at a radius of
2.5 NM.
The following figure shows an example of the display on the ND:
R
EFF : 001-050, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-43-00
Page 87
Nov 01/08
TAI
TCAS - ND Data Display
Figure 024
R
EFF : 001-050, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-43-00
Page 88
Nov 01/08
TAI
TCAS - ND Data Display
Figure 024A
EFF :
053-099, 34-43-00
Page 89
May 01/08
R
TAI
TCAS - Display of Intruders on ND
Figure 025
R
EFF : 001-050, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-43-00
Page 90
Nov 01/08
TAI
**ON A/C 053-099,
G. Information Display
The TCAS information is presented on the CAPT and F/O NDs of the EFIS
system. Additional messages can also be presented on the display units of
the ECAM system.
EFF :
053-099, 34-43-00
Page 91
May 01/08
R
TAI
**ON A/C 053-099,
These indications are only presented for the 10, 20 and 40 NM range
selections. If a TA or RA type intruder is detected and the display
range is at a higher scale, the following message comes into view
at the center of the display, in red for RA and in amber for TA:
REDUCE RANGE
If a TA or RA type intruder is detected and the ND mode is
inadequate for display, the following message comes into view at
the center of the display in the same colors as above:
CHANGE MODE
The TCAS can detect an intruder without acquiring its bearing (for
instance, multipath problem). In this case its range, relative
altitude and an arrow are displayed in the TCAS area (at the bottom
of the ND).
The color of the display is the same as the color of the intruder
symbol.
R
EFF :
053-099, 34-43-00
Page 92
May 01/08
TAI
TCAS - Display of Intruders on ND
Figure 025A
R
EFF :
053-099, 34-43-00
Page 93
May 01/08
TAI
**ON A/C 053-099,
EFF :
ALL 34-43-00
Page 94
May 01/08
R
TAI
TCAS - PFD Data Display
Figure 026
EFF :
ALL 34-43-00
Page 95
May 01/08
R
TAI
(4) Preventive advisory display
Preventive resolution advisories advise the pilot to avoid vertical
speeds that could lead to a hazardous situation.
They are represented by one or two red sectors on the vertical speed
scale.
The pilot must keep the vertical speed of his aircraft outside these
zones.
For example, if own and intruders flight paths are horizontal and
cross through each other, the intruder being at a higher flight
level, if the vertical separation is sufficient, it is not necessary
to modify the aircraft flight path. The positive vertical speed
sector is in red to indicate that the aircraft may remain at its
present level or may descend but must not climb.
(Ref. Fig. 026)
If intruders are detected above and below, two red sectors are
displayed leaving an uncolored zone around the zero value on the
vertical speed scale advising the pilot to maintain the aircraft at
its current level.
The following figure shows several examples of corrective and
preventive advisories.
(Ref. Fig. 027)
EFF :
ALL 34-43-00
Page 96
May 01/08
R
TAI
TCAS - Sector Displays on Vertical Speed Scale
Figure 027
EFF :
ALL 34-43-00
Page 97
May 01/08
R
TAI
TCAS - Messages Displayed on ND
Figure 028
R
EFF :
ALL 34-43-00
Page 98
May 01/08
TAI
TCAS - Messages Displayed on PFD and ECAM
Figure 029
R
EFF :
ALL 34-43-00
Page 99
May 01/08
TAI
R **ON A/C 001-050, 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
The manual operating modes of the TCAS are selected via the ATC/TCAS
control unit
(b) TA mode
In this mode, intruders are displayed on the ND according to
their position in the airspace. The RA type intruder symbols are
converted into TA type symbols. The TCAS performs surveillance
functions but does not generate any resolution advisories.
The TA ONLY message is displayed in white on the NDs in the left
corner of the TCAS message area.
R
EFF : 001-050, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-43-00
Page A0
Nov 01/08
TAI
TCAS - ATC/TCAS Control Unit
Figure 030
R
EFF : 001-050, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-43-00
Page A1
Nov 01/08
TAI
(c) TA/RA mode
The TCAS performs all TA mode functions and also issues
preventive or corrective resolution advisories, represented in
the form of colored sectors along the vertical speed scale on the
PFD.
The sensitivity level is determined automatically in function of
altitude.
The manual operating modes of the TCAS are selected via the ATC/TCAS
control unit
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-43-00
Page A2
Nov 01/08
TAI
(Ref. Fig. 030A)
(b) TA mode
In this mode, intruders are displayed on the ND according to
their position in the airspace. The RA type intruder symbols are
converted into TA type symbols. The TCAS performs surveillance
functions but does not generate any resolution advisories.
The TA ONLY message is displayed in white on the NDs in the left
corner of the TCAS message area.
R
EFF :
053-099, 34-43-00
Page A3
May 01/08
TAI
TCAS - ATC/TCAS Control Unit
Figure 030A
R
EFF :
053-099, 34-43-00
Page A4
May 01/08
TAI
R **ON A/C 001-050, 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
(c) ON mode
The Mode S transponder operates permanently, both in flight and
on the ground. It periodically transmits squitters (at 1 second
intervals) to be detected by other aircraft and replies to their
interrogations and those from ground stations.
This function permits, on ground, to override the inhibition of
replies from interrogations in Mode A or C. It is used by the air
traffic controller to check the correct operation of the aircraft
Mode A or C transponder prior to takeoff.
R
EFF : 001-050, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-43-00
Page A5
Nov 01/08
TAI
(b) ON position
The active transponder replies to interrogations and reports its
altitude. The TCAS operates in the mode selected by its logic in
function of information input from the control unit, ATCRBS/MODE
S ground stations and in function of aircraft altitude.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-43-00
Page A6
Nov 01/08
TAI
(c) ON mode
The Mode S transponder operates permanently, both in flight and
on the ground. It periodically transmits squitters (at 1 second
intervals) to be detected by other aircraft and replies to their
interrogations and those from ground stations.
This function permits, on ground, to override the inhibition of
replies from interrogations in Mode A or C. It is used by the air
traffic controller to check the correct operation of the aircraft
Mode A or C transponder prior to takeoff.
R
EFF :
053-099, 34-43-00
Page A7
May 01/08
TAI
**ON A/C ALL
7. Test
____
A. Self-Test
A quick check of the correct operation of the TCAS installation can be
performed by activating the FUNCTIONAL TEST function:
- either by pressing the pushbutton switch on the front of the TCAS
computer
- or through the CFDIU by applying the procedure TCAS functional test on
the MCDU.
The self-test sequence checks the main functions of the computer and
transmits to the displays:
- resolution advisory characteristics (0 ft/mn advisory, up corrective
advisory, dont descend, dont climb > 2000 ft/mn, rate to maintain) on
label 270
- label frames 130, 131, 132 containing the data for each of the four
intruders according to the following table:
--------------------------------------------------------------------------
| INTRUDER | TYPE | RANGE | REL ALT | BEARING | VERTICAL RATE |
| | | (NM) | (FEET) | (DEG) | |
|------------|--------|---------|-----------|-----------|----------------|
| 1 | RA | 2.00 | +200 | +90 |no vertical rate|
| 2 | TA | 2.00 | -300 | -90 |climbing |
| 3 | PROX | 3.625 | -1100 | +33.75 |descending |
| 4 | OTHER | 3.625 | +1000 | -33.75 |no vertical rate|
--------------------------------------------------------------------------
(1) ND image
The ND must display the images corresponding to the four types of
intruders: Other, Proximate, TA and RA.
The shapes and colors of the traffic symbols are:
- white outlined diamond for Other traffic
- white diamond for Proximate traffic
- yellow circle for TA traffic
- red square for RA traffic
(Ref. Fig. 031)
R
EFF :
ALL 34-43-00
Page A8
May 01/08
TAI
TCAS - Test Display
Figure 031
R
EFF :
001-050, 201-203, 34-43-00
Page A9
May 01/08
TAI
NOTE : Presentation of the TCAS test on the NDs does not agree with
____
ARINC 735 specification.
--------------------------------------------------
| LIGHTS | ASSOCIATED FAULTS |
|-------------|----------------------------------|
| TCAS | No fault detected |
| TCAS FAIL | Any detected faults |
| TOP ANT | Top antenna |
| BOT ANT | Bottom antenna |
| XPDR BUS | Update rate, data format, |
| | signal range |
| RA DISP | Resolution advisory display |
| TA DISP | Traffic advisory display |
| HEADING | Not applicable |
| RA LOG | Not applicable |
| ATTITUDE | Not applicable |
--------------------------------------------------
R
EFF :
001-050, 201-203, 34-43-00
Page A10
May 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-233, 301-399,
R 401-404,
Post SB 34-1060 For A/C 053-099,
Post SB 34-1079 For A/C 053-099,
Post SB 34-1113 For A/C 001-050,053-099,
Post SB 34-1159 For A/C 001-050,053-099,201-203,
Post SB 34-1206 For A/C 001-050,053-099,
A. Self-Test
A quick check of the correct operation of the TCAS installation can be
performed by activating the FUNCTIONAL TEST function:
- either by pressing the pushbutton switch on the front of the TCAS
computer
- or through the CFDIU by applying the procedure TCAS functional test on
the MCDU.
The self-test sequence checks the main functions of the computer and
transmits to the displays:
- resolution advisory characteristics (0 ft/mn advisory, up corrective
advisory, dont descend, dont climb > 2000 ft/mn, rate to maintain) on
label 270
- label frames 130, 131, 132 containing the data for each of the four
intruders according to the following table:
--------------------------------------------------------------------------
| INTRUDER | TYPE | RANGE | REL ALT | BEARING | VERTICAL RATE |
| | | (NM) | (FEET) | (DEG) | |
|------------|--------|---------|-----------|-----------|----------------|
| 1 | RA | 2.00 | +200 | +90 |no vertical rate|
| 2 | TA | 2.00 | -200 | -90 |climbing |
| 3 | PROX | 3.625 | -1000 | +33.75 |descending |
| 4 | OTHER | 3.625 | +1000 | -33.75 |no vertical rate|
--------------------------------------------------------------------------
(1) ND image
The ND must display the images corresponding to the four types of
intruders: Other, Proximate, TA and RA.
The shapes and colors of the traffic symbols are:
- white outlined diamond for Other traffic
- white diamond for Proximate traffic
- yellow circle for TA traffic
- red square for RA traffic
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A11
Nov 01/08
TAI
TCAS - Test Display
Figure 031A
R
EFF : 001-050, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-43-00
Page A12
Nov 01/08
TAI
**ON A/C 053-099,
NOTE : Presentation of the TCAS test on the NDs does not agree with
____
ARINC 735 specification.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A13
Nov 01/08
TAI
TCAS - Test Display
Figure 031B
R
EFF :
053-099, 34-43-00
Page A14
Feb 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-233, 301-399,
R 401-404,
Post SB 34-1060 For A/C 053-099,
Post SB 34-1079 For A/C 053-099,
Post SB 34-1113 For A/C 001-050,053-099,
Post SB 34-1159 For A/C 001-050,053-099,201-203,
Post SB 34-1206 For A/C 001-050,053-099,
--------------------------------------------------
| LIGHTS | ASSOCIATED FAULTS |
|-------------|----------------------------------|
| TCAS | No fault detected |
| TCAS FAIL | Any detected faults |
| TOP ANT | Top antenna |
| BOT ANT | Bottom antenna |
| XPDR BUS | Update rate, data format, |
| | signal range |
| RA DISP | Resolution advisory display |
| TA DISP | Traffic advisory display |
| HEADING | Not applicable |
| RA LOG | Not applicable |
| ATTITUDE | Not applicable |
--------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A15
Nov 01/08
TAI
**ON A/C 053-099,
A. Self-Test
A quick check of the correct operation of the TCAS installation can be
performed by activating the FUNCTIONAL TEST function:
- either by pressing the pushbutton switch on the front of the TCAS
computer
- or through the CFDIU by applying the procedure TCAS functional test on
the MCDU.
The self-test sequence checks the main functions of the computer and
transmits to the displays:
- resolution advisory characteristics (0 ft/mn advisory, up corrective
advisory, dont descend, dont climb > 2000 ft/mn, rate to maintain) on
label 270
- label frames 130, 131, 132 containing the data for each of the three
intruders according to the following table:
--------------------------------------------------------------------------
| INTRUDER | TYPE | RANGE | REL ALT | BEARING | VERTICAL RATE |
| | | (NM) | (FEET) | (DEG) | |
|------------|--------|---------|-----------|-----------|----------------|
| 1 | RA | 2.00 | +200 | +90 |no vertical rate|
| 2 | TA | 2.00 | -200 | -90 |climbing |
| 3 | PROX | 3.625 | -1000 | +33.75 |descending |
--------------------------------------------------------------------------
(1) ND image
The ND must display the images corresponding to the four types of
intruders: Other, Proximate, TA and RA.
The shapes and colors of the traffic symbols are:
- white outlined diamond for Other traffic
- white diamond for Proximate traffic
- yellow circle for TA traffic
- red square for RA traffic.
(Ref. Fig. 031B)
NOTE : Presentation of the TCAS test on the NDs does not agree with
____
ARINC 735 specification.
R
EFF :
053-099, 34-43-00
Page A16
May 01/08
TAI
(2) PFD image
At the beginning of the test sequence, green and red sectors must
appear sequentially on the vertical speed scale of the PFD. Then a
resolution advisory display is shown
(Ref. Fig. 031B)
--------------------------------------------------
| LIGHTS | ASSOCIATED FAULTS |
|-------------|----------------------------------|
| TCAS | No fault detected |
| TCAS FAIL | Any detected faults |
| TOP ANT | Top antenna |
| BOT ANT | Bottom antenna |
| XPDR BUS | Update rate, data format, |
| | signal range |
| RA DISP | Resolution advisory display |
| TA DISP | Traffic advisory display |
| HEADING | Not applicable |
| RA LOG | Not applicable |
| ATTITUDE | Not applicable |
--------------------------------------------------
A. Self-Test
A quick check of the correct operation of the TCAS installation can be
performed by activating the FUNCTIONAL TEST function:
- either by pressing the pushbutton switch on the front of the TCAS
computer
- or through the CFDIU by applying the procedure TCAS functional test on
the MCDU.
R
EFF :
405-499,
053-099, 201-203, 234-299, 301-304, 34-43-00
Page A17
Nov 01/08
TAI
The self-test sequence checks the main functions of the computer and
transmits to the displays:
- resolution advisory characteristics (0 ft/mn advisory, up corrective
advisory, dont descend, dont climb > 2000 ft/mn, rate to maintain) on
label 270
- label frames 130, 131, 132 containing the data for each of the four
intruders according to the following table:
--------------------------------------------------------------------------
| INTRUDER | TYPE | RANGE | REL ALT | BEARING | VERTICAL RATE |
| | | (NM) | (FEET) | (DEG) | |
|------------|--------|---------|-----------|-----------|----------------|
| 1 | RA | 2.00 | +200 | +90 |no vertical rate|
| 2 | TA | 2.00 | -200 | -90 |climbing |
| 3 | PROX | 3.625 | -1000 | +33.75 |descending |
| 4 | OTHER | 3.625 | +1000 | -33.75 |no vertical rate|
--------------------------------------------------------------------------
(1) ND image
The ND must display the images corresponding to the four types of
intruders: Other, Proximate, TA and RA.
The shapes and colors of the traffic symbols are:
- white outlined diamond for Other traffic
- white diamond for Proximate traffic
- yellow circle for TA traffic
- red square for RA traffic
(Ref. Fig. 031A)
NOTE : Presentation of the TCAS test on the NDs does not agree with
____
ARINC 735 specification.
R
EFF :
201-203, 234-299, 301-304, 405-499, 34-43-00
Page A18
Nov 01/08
TAI
R There are several fail lamps on the face of the TCAS computer to
R identify the failed component according to the table below:
R --------------------------------------------------
R | LIGHTS | ASSOCIATED FAULTS |
R |-------------|----------------------------------|
R | TCAS PASS | No fault detected |
R | TCAS FAIL | Any detected faults |
R | TOP ANT | Top antenna |
R | BOT ANT | Bottom antenna |
R | XPDR BUS | Update rate, data format, |
R | | signal range |
R | RAD ALT | Radio Altimeter |
R | RA DISP | Resolution advisory display |
R | TA DISP | Traffic advisory display |
R --------------------------------------------------
B. CFDS
(1) Introduction
The CFDS permits to present the TCAS computer faults on the
Multipurpose Control and Display Units (MCDU) and on the printer.
The TCAS computer which is classified Type 1 system in the CFDS also
delivers data related to fault diagnoses required for its
maintenance.
It communicates with the CFDS through two ARINC 429 low speed buses.
The CFDS is characterized by two operating modes:
- MENU mode
- NORMAL mode.
R
R
EFF :
ALL 34-43-00
Page A19
May 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-233, 301-399,
R 401-404,
Post SB 34-1060 For A/C 053-099,
Post SB 34-1079 For A/C 053-099,
Post SB 34-1113 For A/C 053-099,
Post SB 34-1206 For A/C 053-099,
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-43-00
Page A20
Nov 01/08
TAI
TCAS - Maintenance Test Procedure
Figure 032
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A21
Nov 01/08
TAI
R When the line key adjacent to the TCAS indication is pressed, the
R CFDIU establishes the dialog and provides access to one of the
R eight following items:
R - LAST LEG REPORT
R - PREVIOUS LEGS REPORT
R - LRU IDENTIFICATION
R - GROUND SCANNING
R - TROUBLE SHOOTING DATA
R - CLASS 3 FAULTS
R - GROUND REPORT
R - DISCRETE CONFIGURATION
R - TEST.
R The procedure used to get the page for selection of an item is
R shown in the figure
R (Ref. Fig. 032A)
1
_ Internal faults
-------------------------------------------------------------------------------
| LIST OF INTERNAL FAULT MESSAGES |
|-----------------------------------------------------------------------------|
| ATA | CLASS | MESSAGE |
|-----------------------------------------------------------------------------|
| 344334 | 1 | TCAS (1SG) |
| 344311 | 1 | TCAS TOP ANTENNA (7SG1) |
| 344311 | 1 | TCAS BOT ANTENNA (7SG2) |
-------------------------------------------------------------------------------
R
EFF :
ALL 34-43-00
Page A22
May 01/08
TAI
TCAS - Maintenance Test Procedure
Figure 032A
R
EFF :
201-203, 234-299, 301-304, 405-499, 34-43-00
Page A23
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-233, 301-399,
R 401-404,
Post SB 34-1060 For A/C 053-099,
Post SB 34-1079 For A/C 053-099,
Post SB 34-1113 For A/C 053-099,
Post SB 34-1206 For A/C 053-099,
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-43-00
Page A24
Nov 01/08
TAI
TCAS - Internal Fault Messages
Figure 033
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A25
Nov 01/08
TAI
TCAS - Last Leg Report - Internal Fault Messages
Figure 033A
R
EFF :
201-203, 234-299, 301-304, 405-499, 34-43-00
Page A26
Nov 01/08
TAI
**ON A/C ALL
2
_ External faults
External faults and associated messages are listed in the
table below:
-------------------------------------------------------------------------------
| LIST OF EXTERNAL FAULT MESSAGES |
|-----------------------------------------------------------------------------|
| ATA | CLASS | MESSAGE |
|-----------------------------------------------------------------------------|
| 344233 | 3 | RA1 (2SA1)/TCAS (1SG) |
| 344233 | 3 | RA2 (2SA2)/TCAS (1SG) |
| 344233 | 1 | RA1 (2SA1)/TCAS (1SG) |
| 344233 | 1 | RA2 (2SA2)/TCAS (1SG) |
| 345233 |1 or 3 | ATC 1(1SH1)/TCAS (1SG) |
| 345233 |1 or 3 | ATC 2(1SH2)/TCAS (1SG) |
| 345233 | 1 | ATC 1(1SH1)/TCAS (1SG) |
| 345233 | 1 | ATC 2(1SH2)/TCAS (1SG) |
| 341234 | 1 | ADIRU1 (1FP1)/TCAS (1SG) |
| 240000 | 1 | POWER SUPPLY INTERRUPT |
| 355212 | 1 | ATC - TCAS CTL PNL (3SH)/TCAS (1SG) |
| 313234 | 3 | CFDIU (1TW)/TCAS (1SG) |
-------------------------------------------------------------------------------
EFF :
ALL 34-43-00
Page A27
Nov 01/08
TAI
TCAS - External Fault Messages
Figure 034
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A28
Nov 01/08
TAI
R **ON A/C 201-203, 234-299, 301-304, 405-499,
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-43-00
Page A29
Nov 01/08
TAI
TCAS - Last Leg Report - External Fault Messages/Class 3 fault
Figure 034A
R
EFF :
201-203, 234-299, 301-304, 405-499, 34-43-00
Page A30
Nov 01/08
TAI
TCAS - PREVIOUS LEGS REPORT
Figure 035
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A31
Nov 01/08
TAI
TCAS - Previous Leg Report
Figure 035A
R
EFF :
201-203, 234-299, 301-304, 405-499, 34-43-00
Page A32
Nov 01/08
TAI
TCAS - LRU IDENTIFICATION
Figure 036
R
EFF :
001-050, 201-203, 301-304, 34-43-00
Page A33
May 01/08
TAI
TCAS - LRU Identification
Figure 036A
R
EFF :
234-299, 405-499, 34-43-00
Page A34
Nov 01/08
TAI
TCAS - LRU IDENTIFICATION
Figure 036B
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A35
Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-233, 301-399,
R 401-404,
Post SB 34-1060 For A/C 053-099,
Post SB 34-1079 For A/C 053-099,
Post SB 34-1113 For A/C 053-099,
Post SB 34-1206 For A/C 053-099,
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-43-00
Page A36
Nov 01/08
TAI
TCAS - GROUND SCANNING
Figure 037
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A37
Nov 01/08
TAI
TCAS - GROUND SCANNING
Figure 037A
R
EFF :
201-203, 234-299, 301-304, 405-499, 34-43-00
Page A38
Nov 01/08
TAI
TCAS - TROUBLE SHOOTING DATA
Figure 038
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A39
Nov 01/08
TAI
TCAS - TROUBLE SHOOTING DATA
Figure 038A
R
EFF :
201-203, 234-299, 301-304, 405-499, 34-43-00
Page A40
Nov 01/08
TAI
TCAS - GROUND REPORT
Figure 039
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A41
Nov 01/08
TAI
R **ON A/C 201-203, 234-299, 301-304, 405-499,
R
EFF :
405-499,
001-050, 201-203, 234-299, 301-304, 34-43-00
Page A42
Nov 01/08
TAI
**ON A/C 001-050, 201-203, 234-299, 301-304, 405-499,
EFF :
405-499,
001-050, 201-203, 234-299, 301-304, 34-43-00
Page A43
Feb 01/09
TAI
TCAS - GROUND REPORT
Figure 039A
R
EFF :
201-203, 234-299, 301-304, 405-499, 34-43-00
Page A44
Nov 01/08
TAI
TCAS - DISCRETE CONFIGURATION 1/3
Figure 040
R
EFF :
405-499,
053-099, 201-203, 234-299, 301-304, 34-43-00
Page A45
Feb 01/09
TAI
TCAS - DISCRETE CONFIGURATION 2/3
Figure 041
R
EFF :
405-499,
053-099, 201-203, 234-299, 301-304, 34-43-00
Page A46
Feb 01/09
TAI
TCAS - DISCRETE CONFIGURATION 3/3
Figure 042
R
EFF :
405-499,
053-099, 201-203, 234-299, 301-304, 34-43-00
Page A47
Feb 01/09
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-233, 301-399, 401-404,
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-43-00
Page A48
Nov 01/08
TAI
TCAS - Functional Test (Sheet 1/2)
Figure 043
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A49
Nov 01/08
TAI
TCAS - Functional Test (Sheet 1/2)
Figure 043A
R
EFF :
201-203, 234-299, 301-304, 405-499, 34-43-00
Page A50
Nov 01/08
TAI
TCAS - Functional Test (Sheet 2/2)
Figure 044
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-233, 301-399, 401-404,
34-43-00
Page A51
Nov 01/08
TAI
TCAS - Functional Test 2/2
Figure 044A
R
EFF :
201-203, 234-299, 301-304, 405-499, 34-43-00
Page A52
Nov 01/08
TAI
- at the end of the functional test the TCAS computer generates a
complete sequence of synthesized voice messages.
When all the tests are completed and no fault has been detected the
computer reports:
TCAS SYSTEM TEST PASS.
If one of the test criteria has not been met, the synthesized voice
message is announced:
TCAS SYSTEM TEST FAIL
Remarks:
- this short test permits to check rapidly, on ground, the
functionality of the TCAS and particularly that of the PFD/NDs via
the DMC.
In addition it enables to check correct operation of the
synthesized voice message system.
R
EFF :
001-050, 053-099, 234-299, 405-499, 34-43-00
Page A53
Nov 01/08
TAI
R **ON A/C 053-099,
- the test ends with the display of the following message on the
MCDU:
TEST PASSED or TEST FAIL
- at the end of the functional test the TCAS computer generates a
complete sequence of synthesized voice messages.
When all the tests are completed and no fault has been detected the
computer reports TCAS TEST PASS.
If one of the test criteria has not been met, the synthesized voice
message TCAS SYSTEM TEST FAIL is announced.
Remarks:
- this short test permits to check rapidly, on ground, the
functionality of the TCAS and particularly that of the PFD/NDs via
the DMC.
In addition it enables to check correct operation of the
synthesized voice message system
EFF :
001-050, 053-099, 34-43-00
Page A54
May 01/08
TAI
TRAFFIC COLLISION AVOIDANCE SYSTEM (TCAS) - SERVICING
_____________________________________________________
TASK 34-43-00-610-001
Uploading Procedure with Portable Data Loader (SFIM or equivalent) to Load the
Operational Software of the TCAS
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-43-00
Page 301
Nov 01/07
TAI
R **ON A/C 001-050, 053-099, 201-203,
3. __________
Job Set-up
Subtask 34-43-00-861-051
Subtask 34-43-00-860-071
B. On the PORTABLE DATA LOADER (YV68A110), make sure that the ON/OFF switch
is at OFF.
Subtask 34-43-00-010-052
C. Get Access
(1) Put the access platform in position at the access door 824 in zone
128.
Subtask 34-43-00-865-067
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R
EFF :
001-050, 053-099, 201-203, 34-43-00
Page 302
Nov 01/07
TAI
R **ON A/C 001-050, 053-099, 201-203,
Subtask 34-43-00-860-072
(a) Remove the blanking cap from the DATA LOADER connector 194VC.
(b) Connect the cable of the portable data loader to the DATA LOADER
connector 194VC.
Subtask 34-43-00-865-068
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/MCDU/1 11CA1 B01
49VU L/G/LGCIU/SYS1/NORM 1GA C09
121VU CFDS/CFDIU/SPLY 2TW J18
121VU CFDS/CFDIU/BACK/UP 8TW J17
121VU AUTO FLT/MCDU/2 11CA2 N20
121VU HYDRAULIC/LGCIU/SYS2 2GA Q35
Subtask 34-43-00-865-069
G. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
4SG.
R
EFF :
001-050, 053-099, 201-203, 34-43-00
Page 303
Nov 01/07
TAI
Data Loader Connector
Figure 301/TASK 34-43-00-991-001
R
EFF :
001-050, 053-099, 201-203, 34-43-00
Page 304
Nov 01/07
TAI
R **ON A/C 001-050, 053-099, 201-203,
4. Procedure
_________
Subtask 34-43-00-970-052
NOTE : After the uploading operations, you must do a check on the MCDU,
____
of the reference of the data loaded in the computer.
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- set the ON/OFF switch to ON. - the < < MDDU READY > > indication
comes into view.
- put the disk into the disk - the READY indication comes into view
drive, the label in the forward - then, the WAIT RESPONSE indication
direction. comes into view
- then, the TRANSF IN PROG indication
comes into view.
- eject the disk from the disk - the < < MDDU READY > > indication
drive. comes into view.
R
EFF :
001-050, 053-099, 201-203, 34-43-00
Page 305
Nov 01/07
TAI
Subtask 34-43-00-280-055
B. On the MCDU Check of the Reference of the Data Loaded in the TCAS
(1) On the center pedestal, on one MCDU, get the SYSTEM REPORT/TEST/NAV
page (Ref. TASK 31-32-00-860-010).
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the TCAS page comes into view.
the TCAS indication.
- push the line key adjacent to - the LRU IDENTIFICATION page comes
the LRU IDENT indication. into view.
5. Close-up
________
Subtask 34-43-00-860-073
(1) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
(2) On the portable data loader, set the ON/OFF switch to OFF.
R
EFF :
001-050, 053-099, 201-203, 34-43-00
Page 306
Nov 01/07
TAI
Subtask 34-43-00-865-070
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
Subtask 34-43-00-860-074
(1) On the panel 188VU, disconnect the cable of the portable data loader
from the DATA LOADER connector
Subtask 34-43-00-865-071
D. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
4SG.
Subtask 34-43-00-862-051
Subtask 34-43-00-410-052
F. Close Access
R
EFF :
001-050, 053-099, 201-203, 34-43-00
Page 307
Nov 01/07
TAI
**ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
TASK 34-43-00-610-001-A
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-43-00-861-053
Subtask 34-43-00-860-077
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-43-00
Page 308
Feb 01/09
TAI
Subtask 34-43-00-865-075
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU AUTO FLT/MCDU/1 11CA1 B01
49VU L/G/LGCIU/SYS1/NORM 1GA C09
121VU CFDS/CFDIU/SPLY 2TW J18
4. Procedure
_________
Subtask 34-43-00-970-054
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-43-00
Page 309
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the PREV or NEXT key until - TCAS
you get the indication of the NOT SELECTED
TCAS indication is shown
7. Eject the disk from the disk On the multipurpose disk drive unit:
drive of the data loader - the < < MDDU READY > > indication is
shown
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-43-00
Page 310
Nov 01/08
TAI
Subtask 34-43-00-280-057
B. On the MCDU Check of the Reference of the Data Loaded in the TCAS
(1) On the center pedestal, on one MCDU, get the SYSTEM REPORT/TEST/NAV
page (Ref. TASK 31-32-00-860-010).
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to - the TCAS page comes into view.
the TCAS indication.
- push the line key adjacent to - the LRU IDENTIFICATION page comes
the LRU IDENT indication. into view.
5. Close-up
________
Subtask 34-43-00-860-078
(1) On the MCDU, push the line key adjacent to the RETURN indication
until the CFDS menu page comes into view.
Subtask 34-43-00-080-051
(1) On the Data Loading Selector, set the ON/OFF switch to OFF.
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-43-00
Page 311
Nov 01/08
TAI
Subtask 34-43-00-862-053
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-43-00
Page 312
Nov 01/08
TAI
TRAFFIC COLLISION AVOIDANCE SYSTEM (TCAS) - DEACTIVATION/REACTIVATION
_____________________________________________________________________
TASK 34-43-00-040-001
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-43-00-860-067
(2) Do the EIS start procedure (PFDs and NDs only) (Ref. TASK 31-60-00-
860-001).
EFF :
ALL 34-43-00
Page 401
Feb 01/06
R
TAI
(4) On the EFIS control sections of the FCU:
- set the mode selector switches to ROSE.
- set the scale selector switches to 10.
Subtask 34-43-00-865-063
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU COM NAV/ATC/1 5SH1 G11
121VU COM NAV/ATC/2 5SH2 K07
4. Procedure
_________
Subtask 34-43-00-040-050
(1) Open, safety and tag the circuit breaker 4SG of the TCAS (ignore the
related warnings).
EFF :
ALL 34-43-00
Page 402
Nov 01/08
TAI
**ON A/C ALL
5. Close-up
________
Subtask 34-43-00-860-068
(1) On the ADIRS CDU, set the OFF/NAV/ATT selector switches to OFF.
(5) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-43-00
Page 403
Feb 01/06
R
TAI
**ON A/C ALL
TASK 34-43-00-440-001
1. __________________
Reason for the Job
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-43-00-860-069
EFF :
ALL 34-43-00
Page 404
Nov 01/08
R
TAI
**ON A/C ALL
4. Procedure
_________
Subtask 34-43-00-440-050
5. Close-up
________
Subtask 34-43-00-860-070
(2) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-43-00
Page 405
May 01/08
TAI
**ON A/C ALL
TASK 34-43-00-740-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-43-00-860-050
(2) Do the EIS start procedure (PFDs and NDs only) (Ref. TASK 31-60-00-
860-001).
EFF :
ALL 34-43-00
Page 501
Feb 01/06
R
TAI
(3) Do the IR alignment procedure (Ref. TASK 34-10-00-860-004).
(5) On the center pedestal, if the ATC/TCAS control unit has the ALTITUDE
REPORTING function , set the ALT RPTG (or ALT RPT) switch to ON.
(6) Do the procedure to get access to the SYSTEM REPORT/TEST NAV page on
one MCDU (Ref. TASK 31-32-00-860-010):
- push the NEXT PAGE function key (two times) until the TCAS menu
page comes into view.
Subtask 34-43-00-860-086
Subtask 34-43-00-865-118
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU COM NAV/ATC/1 5SH1 G11
121VU COM NAV/ATC/2 5SH2 K07
EFF :
ALL 34-43-00
Page 502
Feb 01/09
TAI
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 220-299, 306-399,
R 401-499,
4. Procedure
_________
Subtask 34-43-00-740-050-C
NOTE : During the test, obey the instructions shown on the MCDU used.
____
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
- push the line key adjacent to the - the subsequent TCAS TEST page with
TEST indication. instructions comes into view.
- push the line key adjacent to the - the TEST IN PROGRESS 8 S indication
START TEST indication. comes into view.
- this sequence starts:
- in the loudspeakers:
* you can hear the TCAS TEST message.
- on the CAPT and F/O NDs, these
symbols come into view:
* a white unfilled diamond with a +10
indication.
* a white solid diamond with a down
arrow and a - 10 indication.
* an amber solid circle with an up
arrow and a - 02 indication.
* a red solid square with a + 02
indication.
- on the CAPT and F/O PFDs:
* the V/S scale is divided into three
sectors: one grey and two red.
* the symbols go out of view.
* the V/S scale goes back to the
normal configuration.
- in the loudspeakers:
* you can hear the TCAS TEST PASSED
message.
EFF :
ALL 34-43-00
Page 503
Nov 01/08
TAI
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
On the MCDU:
- push the line key adjacent to the - THE SYNTHETIC VOICE WAS GENERATED:
YES indication. indication comes into view.
- push the line key adjacent to the - the TEST OK page comes into view
PASS indication. after a short period.
- push the line key adjacent to the - the TCAS menu page comes into view.
RETURN indication.
5. Close-up
________
Subtask 34-43-00-860-136
Subtask 34-43-00-860-051
(1) On the ADIRS CDU, set the OFF/NAV/ATT selector switches to OFF.
(2) On the center pedestal, on the MCDU, push the line key adjacent to
the RETURN indication until the MCDU MENU page comes into view.
(5) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-43-00
Page 504
Nov 01/08
TAI
TASK 34-43-00-720-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-43-00-480-050
EFF :
ALL 34-43-00
Page 505
Feb 01/08
R
TAI
Subtask 34-43-00-860-079
(3) On the panel 13VU, on the CAPT and F/O EFIS control sections of the
FCU:
- set the mode selector switch to ROSE/NAV
- set the scale selector switch to 10.
Subtask 34-43-00-865-079
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
49VU COM NAV/ATC/1 5SH1 G11
121VU COM NAV/RAD ALTM/2 1SA2 K12
121VU COM NAV/ATC/2 5SH2 K07
Subtask 34-43-00-865-082
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RAD ALTM/1 1SA1 K11
R
EFF :
ALL 34-43-00
Page 506
Nov 01/08
TAI
R **ON A/C 001-050, 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
Subtask 34-43-00-860-080
Subtask 34-43-00-480-051
NOTE : For the test of the TCAS top antenna, put the ATC/TCAS test set on
____
an access platform.
(1) Put the ATC/TCAS test set in position on the right side of the
aircraft at 40 ft. (12.19 m) from the bottom (top) antenna and at the
same level as the antenna.
(3) Make sure that the test antenna is in the line of sight of the TCAS
bottom (top) antenna.
EFF :
ALL 34-43-00
Page 507
Nov 01/08
TAI
4. Procedure
_________
Subtask 34-43-00-720-050
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
3. On the ATC/TCAS test set, start On the ATC/TCAS test set, the scenario
the test starts.
After some minutes, a minimum of two
symbols come into view one after the
other, in the left part of the ND:
- a yellow circle (Traffic Advisory) in
the 5NM range
- then the yellow circle becomes a red
square (Resolution Advisory).
R
EFF :
ALL 34-43-00
Page 508
Feb 01/09
TAI
5. Close-up
________
Subtask 34-43-00-865-083
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
1SA1
Subtask 34-43-00-860-081
(1) On the center pedestal, put the ATC/TCAS control unit back to its
initial configuration (standby/off mode).
Subtask 34-43-00-080-052
C. Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
(1) Remove the aluminum adhesive tape from the RA reception antenna 2.
(2) Remove the ATC/TCAS test set and the test antenna.
Subtask 34-43-00-410-053
D. Close Access
EFF :
ALL 34-43-00
Page 509
Feb 01/09
R
TAI
ANTENNA - TCAS (7SG1,7SG2) - REMOVAL/INSTALLATION
_________________________________________________
TASK 34-43-11-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-43-11
Page 401
May 01/05
R
TAI
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-43-11-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
EFF :
ALL 34-43-11
Page 402
Nov 01/08
TAI
**ON A/C ALL
Subtask 34-43-11-010-050
B. Get Access
R (1) Put the access platform in position at zone 230 to get access to the
R TCAS top antenna 7SG1
R
4. Procedure
_________
Subtask 34-43-11-020-050
(1) Remove the sealant from the screw heads and around the antenna base.
(3) Pull the antenna (5) away from the fuselage structure (1).
NOTE : For the antenna 7SG1, the coaxial connectors (2) must not go
____
into the fuselage.
(5) Remove and discard the O-ring (4) and the gasket (3).
(7) Put blanking caps on the disconnected coaxial connectors (2) and (8).
EFF :
ALL 34-43-11
Page 403
May 01/05
TAI
TCAS Antenna
R Figure 401/TASK 34-43-11-991-001
R
EFF :
001-050, 053-099, 34-43-11
Page 404
Aug 01/00
TAI
(8) FOR 7SG1
Put masking tape around the coaxial cables (2) and attach them to the
fuselage.
(9) Remove the sealant with a nonmetallic scraper and clean the fuselage
structure with CLEANING AGENTS (Material No. 11-003).
Subtask 34-43-11-020-050-A
(1) Remove the sealant from the screw heads and around the antenna base.
(3) Pull the antenna (6) away from the fuselage structure (1).
NOTE : For the antenna 7SG1, the coaxial connectors (2) must not go
____
into the fuselage.
(6) Remove and discard the O-ring (4) and the gasket (3).
(8) Put blanking caps on the disconnected coaxial connectors (2) and (9).
(10) Remove the sealant with a nonmetallic scraper and clean the fuselage
structure with CLEANING AGENTS (Material No. 11-003).
EFF :
ALL 34-43-11
Page 405
May 01/05
TAI
TCAS Antenna
Figure 401A/TASK 34-43-11-991-001-A
EFF :
ALL 34-43-11
Page 406
May 01/05
R
TAI
**ON A/C ALL
TASK 34-43-11-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-43-11
Page 407
May 01/05
TAI
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-43-11
Page 408
Feb 01/09
TAI
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
3. __________
Job Set-up
Subtask 34-43-11-860-050
A. Get Access
(1) Make sure that the access platform is in position at zone 230 to get
access to the TCAS top antenna 7SG1.
Subtask 34-43-11-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
EFF :
ALL 34-43-11
Page 409
Nov 01/08
TAI
**ON A/C ALL
4. Procedure
_________
R WARNING : DO NOT GET THE FLUID ON YOUR SKIN OR IN YOUR EYES. IF YOU DO:
_______
R - FLUSH IT AWAY WITH CLEAN WATER
R - GET MEDICAL AID.
Subtask 34-43-11-420-050
WARNING : OBEY THE COLOR CODES WHEN YOU CONNECT THE ELECTRICAL CONNECTORS
_______
(THIS WILL PREVENT CROSS-CONNECTIONS).
MAKE SURE THAT YOU INSTALL THE ANTENNA IN THE CORRECT
DIRECTION. IF THE ANTENNA DOES NOT POINT IN THE CORRECT
DIRECTION, THE TCAS WILL ONLY SENSE TRAFFIC BEHIND THE
AIRCRAFT.
(1) Remove the used sealant from the fuselage structure (1) with a
nonmetallic scraper.
(2) Clean the component interface and/or the adjacent area with CLEANING
AGENTS (Material No. 11-004) and lint-free cloth.
(4) Put the new O-ring (4) in the correct position on the antenna (5).
(5) Align the new gasket (3) with the screw holes.
(6) Remove the blanking caps from the coaxial connectors (2) and (8).
EFF :
ALL 34-43-11
Page 410
Feb 01/05
TAI
(7) Make sure that the electrical connectors are clean and in the correct
condition.
(8) Remove the masking tape from the coaxial cables and connect each
connector (2) to the related connector (8) (see color code).
(9) Safety the coaxial connectors (2) and (8) with corrosion-resistant-
steel lockwire 0.4 mm (0.016 in.) dia..
(10) Install the antenna (5) on the fuselage structure (1) with the screws
(7) and the washers (6) and then tighten:
- TORQUE the screws to between 0.22 and 0.28 m.daN (19.46 and 24.77
lbf.in)
(11) Make sure that the bonding contact resistance between the antenna (5)
and the fuselage structure (1) is not higher than 5 milliohms
(Ref. TASK 20-28-00-912-005).
(12) Install the MISCELLANEOUS (Material No. 19-002) on the screw heads
with the SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-
008D). This is necessary for the subsequent removal of the antenna.
(15) Apply STRUCTURE PAINTS (Material No. 16-003) to the sealant around
the antenna and the screw heads.
(16) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
001B) to the sealant of the head of the screws (7).
EFF :
001-050, 053-099, 34-43-11
Page 411
Aug 01/07
TAI
**ON A/C ALL
Subtask 34-43-11-420-050-A
WARNING : OBEY THE COLOR CODES WHEN YOU CONNECT THE ELECTRICAL CONNECTORS
_______
(THIS WILL PREVENT CROSS-CONNECTIONS).
MAKE SURE THAT YOU INSTALL THE ANTENNA IN THE CORRECT
DIRECTION. IF THE ANTENNA DOES NOT POINT IN THE CORRECT
DIRECTION, THE TCAS WILL ONLY SENSE TRAFFIC BEHIND THE
AIRCRAFT.
(1) Remove the used sealant from the fuselage structure (1) with a
nonmetallic scraper.
(2) Clean the component interface and/or the adjacent area with CLEANING
AGENTS (Material No. 11-004) and a lint-free cloth.
(4) Put the new O-ring (4) in the correct position on the antenna (6).
(6) Align the new gasket (3) with the screw holes.
(7) Remove the blanking caps from the coaxial connectors (2) and (9).
(8) Make sure that the electrical connectors are clean and in the correct
condition.
(9) Remove the masking tape from the coaxial cables and connect each
connector (2) to the related connector (9) (see color code).
EFF :
ALL 34-43-11
Page 412
May 01/07
R
TAI
(10) Safety the coaxial connectors (2) and (9) with corrosion-resistant-
steel lockwire 0.4 mm (0.016 in.) dia..
(11) Install the antenna (6) on the fuselage structure (1) with the screws
(8) and the washers (7) and then tighten:
- TORQUE the screws to between 0.22 and 0.28 m.daN (19.46 and 24.77
lbf.in)
(12) Make sure that the bonding contact resistance between the antenna (6)
and the fuselage structure (1) is not higher than 5 milliohms
(Ref. TASK 20-28-00-912-005).
(13) Install the MISCELLANEOUS (Material No. 19-002) on the screw heads
with the SEALANTS (Material No. 09-016) or SEALANTS (Material No. 09-
008D). This is necessary for the subsequent removal of the antenna.
(16) Apply STRUCTURE PAINTS (Material No. 16-003) to the sealant around
the antenna and the screw heads.
(17) Apply PAINTS FOR DETAIL (INTERNAL AND EXTERN AL) (Material No. 07-
001B) to the sealant of the head of the screws (8).
Subtask 34-43-11-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
4SG
Subtask 34-43-11-740-050
EFF :
ALL 34-43-11
Page 413
Aug 01/07
TAI
**ON A/C ALL
5. Close-up
________
Subtask 34-43-11-410-050
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
EFF :
ALL 34-43-11
Page 414
May 01/07
R
TAI
COMPUTER - TCAS (1SG) - REMOVAL/INSTALLATION
____________________________________________
TASK 34-43-34-000-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-43-34
Page 401
Feb 01/06
R
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-43-34-865-050
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
Subtask 34-43-34-010-050
B. Get Access
(1) Put the access platform in position at the access door 824 in zone
128
EFF :
ALL 34-43-34
Page 402
Nov 01/08
TAI
**ON A/C ALL
4. Procedure
_________
Subtask 34-43-34-020-050
(3) Pull the TCAS computer (1) on its rack (3) to disconnect the
electrical connectors (2).
(4) Remove the TCAS computer (1) from its rack (3).
EFF :
ALL 34-43-34
Page 403
Feb 01/06
R
TAI
TCAS Computer
Figure 401/TASK 34-43-34-991-001
EFF :
ALL 34-43-34
Page 404
May 01/05
R
TAI
**ON A/C ALL
TASK 34-43-34-400-001
1. __________________
Reason for the Job
Self Explanatory
2. ______________________
Job Set-up Information
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
EFF :
ALL 34-43-34
Page 405
Feb 01/06
R
TAI
**ON A/C ALL
3. __________
Job Set-up
Subtask 34-43-34-860-050
(1) Make sure that the access platform is in position at the access door
824 in zone 128.
Subtask 34-43-34-865-051
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
EFF :
ALL 34-43-34
Page 406
Nov 01/08
TAI
**ON A/C ALL
4. Procedure
_________
Subtask 34-43-34-420-050
(3) Remove the blanking caps from the electrical connectors (2).
(4) Make sure that the electrical connectors are clean and in the correct
condition.
(5) Install the TCAS computer (1) on its rack (3) to connect the
electrical connectors (2).
(6) Engage the nuts (4) on the lugs (5) and tighten.
Subtask 34-43-34-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s):
4SG
Subtask 34-43-34-740-050
EFF :
ALL 34-43-34
Page 407
Feb 01/06
R
TAI
**ON A/C ALL
5. Close-up
________
Subtask 34-43-34-860-051
(1) Make sure that the work area is clean and clear of tool(s) and other
items.
Subtask 34-43-34-410-050
B. Close Access
EFF :
ALL 34-43-34
Page 408
Feb 01/06
R
TAI
GROUND PROXIMITY WARNING SYSTEM (GPWS) - DESCRIPTION AND OPERATION
__________________________________________________________________
1. _______
General
(Ref. Fig. 001)
The Ground Proximity Warning System (GPWS) generates aural and visual
warnings if the aircraft adopts a potentially hazardous condition with
respect to:
Mode 1 - Excessive rate of descent
Mode 2 - Excessive closure rate with terrain
Mode 3 - Descent after takeoff and minimum terrain clearance
Mode 4 - Unsafe terrain clearance
Mode 5 - Descent below glide slope.
The system is operative between 30 ft. and 2450 ft. radio altitude.
Four pushbutton switches on the overhead panel enable the flight crew to
inhibit an abnormal flap condition signal, all GPWS warning signals and a
glide slope warning signal.
A GPWS/G/S pushbutton switch located on the main instrument panel (Captain
and F/O) is also used to initiate the GPWC self-test when the aircraft is
above 1000 ft. or below 30 ft. radio altitude.
The Ground Proximity Warning Computer (GPWC) is installed in the avionics
compartment.
Aural warnings are broadcast from the cockpit loud speakers.
The FAULT legend of the SYS pushbutton switch, located on the overhead panel
21VU, comes on to indicate system fault.
(Ref. Fig. 001)
EFF :
001-050, 053-099, 34-48-00
Page 1
Config-1 Aug 01/06
TAI
R GPWS - Component Location
Figure 001
EFF :
001-050, 053-099, 34-48-00
Page 2
Config-1 May 01/06
TAI
GPWS - Component Location
Figure 001A
R
EFF :
001-050, 053-099, 34-48-00
Page 3
Config-1 Aug 01/06
TAI
The Ground Proximity Warning Computer (GPWC) is installed in the avionics
compartment.
Aural warnings are broadcast from the cockpit loud speakers.
The FAULT legend of the SYS pushbutton switch, located on the overhead panel
21VU, comes on to indicate system fault.
2. Component
__________________
Location
(Ref. Fig. 001)
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
1WZ GPWC 88VU 128 824 34-48-34
4WZ P/BSW-GPWS/G/S 500VU 212 34-48-00
5WZ P/BSW-GPWS/G/S 301VU 211 34-48-00
7WZ P/BSW-GPWS/FLAP MODE 21VU 211 34-48-00
9WZ P/BSW-GPWS/SYS 21VU 211 34-48-00
11WZ P/BSW-GPWS/G/S MODE 21VU 211 34-48-00
13WZ P/BSW-GPWS/LDG FLAP 3 21VU 211 34-48-00
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
1WZ GPWC 88VU 128 824 34-48-34
4WZ P/BSW-PULL UP/GPWS 500VU 212 34-48-00
5WZ P/BSW-PULL UP/GPWS 301VU 211 34-48-00
7WZ P/BSW-GPWS/FLAP MODE 21VU 211 34-48-00
9WZ P/BSW-GPWS/SYS 21VU 211 34-48-00
11WZ P/BSW-GPWS/G/S MODE 21VU 211 34-48-00
13WZ P/BSW-GPWS/LDG FLAP 3 21VU 211 34-48-00
EFF :
001-050, 053-099, 34-48-00
Page 4
Config-1 Aug 01/06
TAI
**ON A/C 001-050, 053-099,
3. __________________
System Description
A. General
The GPWS monitors data inputs from the navigation sensors. This
information is used to provide suitable aural warnings to alert the crew
of insufficient terrain clearance or excessive descent rate.
B. Warnings
Warnings are generated by the Ground Proximity Warning Computer (GPWC)
which is installed on the shelf 88VU, in the aft electronics rack 80VU.
Aural warnings are broadcast from the cockpit loud speakers.
EFF :
001-050, 053-099, 34-48-00
Page 5
Config-1 May 01/05
TAI
GPWS - Inputs (Buses)
Figure 002
EFF :
001-050, 053-099, 34-48-00
Page 6
Config-1 Aug 01/04
R
TAI
GPWS - Inputs (Discretes)
Figure 003
R
EFF :
053-099, 34-48-00
Page 7
Config-1 Aug 01/04
TAI
GPWS - Inputs (Discretes)
Figure 003A
EFF :
001-050, 053-099, 34-48-00
Page 8
Config-1 May 01/05
R
TAI
- Flight Warning Computer 1 and 2 (FWC) (stall warning inhibition)
- main landing gear
- ECAM control panel (audio suppression)
- FLAP MODE pushbutton switch which, when pressed (in) (white OFF legend
on), overrides a flap abnormal condition input
- SYS pushbutton switch which, when pressed (in) (white OFF legend on),
overrides all the GPWS warnings
- G/S MODE pushbutton switch which, when pressed (in) (white OFF legend
on), overrides the glide slope mode
- GPWS/G/S pushbutton switch which, when pressed (in), enables the GPWC
to perform test.
EFF :
001-050, 053-099, 34-48-00
Page 9
Config-1 Aug 01/06
TAI
R GPWS - Inputs (Discretes)
R Figure 003B
EFF :
053-099, 34-48-00
Page 10
Config-1 Aug 01/06
TAI
**ON A/C 001-050, 053-099,
E. Warning Outputs
- two discrete outputs from the GPWC control the GPWS/G/S pushbutton
switches located on Captain and First Officer main instrument panels.
Each pushbutton switch is a momentary contact pushbutton switch with an
illuminated split legend cap. The upper legend identified GPWS,
controlled by the first output, comes on red when a ground proximity
warning is generated by the GPWC for modes 1 to 4.
The lower legend identified G/S, controlled by the second output, comes
on amber when a glide slope (Mode 5) advisory alert is generated by the
GPWC.
The pushbutton switch provides a facility to cancel a glide slope
warning, if in progress, or to initiate a GPWS self-test.
- both discrete outputs are also used to inhibit automatic call out when
the GPWS or G/S warnings are in progress.
- both discrete outputs are also used for the Digital Flight Data
Recorder (DFDR).
-------------------------------------------------------------------------------
NAME ELECTRICAL LEVEL TO SIGNAL STATUS
-------------------------------------------------------------------------------
FAULT LEGEND GND/OC SYS P/BSW/SDACs GND = VALID
G/S VISUAL ALERT GND/OCFWCsGND = VALID
GPWS LEGEND GND/OCFWCsGND = VALID
-------------------------------------------------------------------------------
R
EFF :
001-050, 053-099, 34-48-00
Page 11
Config-1 Aug 01/06
TAI
GPWS - Outputs
Figure 004
R
EFF :
053-099, 34-48-00
Page 12
Config-1 Aug 01/06
TAI
GPWS - Outputs
Figure 004A
EFF :
001-050, 053-099, 34-48-00
Page 13
Config-1 Aug 01/06
R
TAI
GPWS - Outputs
Figure 004B
EFF :
001-050, 053-099, 34-48-00
Page 14
Config-1 Aug 01/06
R
TAI
R **ON A/C 001-050, 053-099,
E. Warning Outputs
- two discrete outputs from the GPWC control the PULL UP/GPWS pushbutton
switches located on Captain and First Officer main instrument panels.
Each pushbutton switch is a momentary contact pushbutton switch with an
illuminated split legend cap. The upper legend identified PULL UP,
controlled by the first output, comes on red when a ground proximity
warning is generated by the GPWC for modes 1 to 4.
The lower legend identified GPWS, controlled by the second output,
comes on amber when a glide slope (Mode 5) advisory alert is generated
by the GPWC.
The pushbutton switch provides a facility to cancel a glide slope
warning, if in progress, or to initiate a GPWS self-test.
- both discrete outputs are also used to inhibit automatic call out when
the GPWS or GPWS warnings are in progress.
- both discrete outputs are also used for the Digital Flight Data
Recorder (DFDR).
-------------------------------------------------------------------------------
NAME ELECTRICAL LEVEL TO SIGNAL STATUS
-------------------------------------------------------------------------------
FAULT LEGEND GND/OC SYS P/BSW/SDACs GND = VALID
G/S VISUAL ALERT GND/OC FWCs GND = VALID
GPWS LEGEND GND/OC FWCs GND = VALID
-------------------------------------------------------------------------------
F. Monitor Output
The monitor output from the GPWC controls the FAULT legend of the SYS
pushbutton switch .
EFF :
001-050, 053-099, 34-48-00
Page 15
Config-1 Aug 01/06
TAI
G. Bus Output
The bus output could be used by the aircraft integrated data system
(AIDS) (data management unit (DMU) and by the Centralized Fault-Display
Interface - Unit (CFDIU) for test causes.
H. Audio Output
The audio output is used by the cockpit loud speakers for aural warning
messages.
4. ____________
Power Supply
The GPWC power supply circuits receive 115VAC, 400 Hz, single phase (20 W
max.) supply from the aircraft AC power and converts this supply to the
following DC levels:
plus or minus 15VDC from linear regulators with current limiting
+ 5VDC from a compensated switching regulator with current limiting
- 30VDC from a voltage doubler, fed by the 15VDC regulated supply.
EFF :
001-050, 053-099, 34-48-00
Page 16
Config-1 Aug 01/06
TAI
5. _____________________
Component Description
A. GPWC (1WZ)
(1) Description
(b) The face of the GPWC contains a STATUS/HISTORY test switch and
associated 8-character, alpha-numeric BITE display. If the
STATUS/HISTORY switch is momentarily set to PRESENT STATUS, the
BITE display provides a sequential readout of system operational
status. If the STATUS/HISTORY switch is momentarily set to FLIGHT
HISTORY, the BITE display provides a sequential readout of system
faults stored from the previous 10 flights.
(c) The back of the GPWC contains an ARINC 600, shell size connector
to provide electrical connections to the aircraft wiring via
mount.
Contact grouping is as follows:
- Top contact set - ATE interface + system interconnections
- Center contact set - System interconnections
- Bottom contact set - Power supply and bonding.
EFF :
001-050, 053-099, 34-48-00
Page 17
Config-1 Aug 01/06
R
TAI
GPWC
Figure 005
EFF :
001-050, 053-099, 34-48-00
Page 18
Config-1 Aug 01/06
R
TAI
(2) Operation
(b) Processor/voice/memory
The processor/voice/memory consists of a 16-bit microprocessor
(with associated timing and buffer circuits), program and voice
memories, delta modulator, serial data stream generator, serial
communication port, interrupt controllers and various associated
logic. The 16-bit microprocessor is driven by a 4 MHz clock and
is monitored by a watchdog timer. The watchdog timer resets the
processor in the event of an incomplete program iteration.
The aural warning messages reside in two 64 Kbytes X 8 Erasable
Programmable Read Only Memories (EPROMs). The vocabulary for the
messages can be defined by an alternate audio alert select
discrete input.
When a message is required for broadcast, the associated bits are
converted from parallel to serial format and shifted into the
delta modulator. The audio output is filtered, amplified and
isolated to provide a suitable signal for the cockpit loud
speakers.
Data storage in the scratchpad memory is achieved using two 8
Kbytes RAMs.
Fault history data is stored in an Electrically Erasable
Programmable ROM (EEPROM) which is also used to store present
flight characteristics data for use after momentary power losses.
The program memory resides in 64 Kbytes EPROMs. The EPROMs are
ultra-violet light erasable.
EFF :
001-050, 053-099, 34-48-00
Page 19
Config-1 Aug 01/06
R
TAI
GPWC - Block Diagram
Figure 006
EFF :
001-050, 053-099, 34-48-00
Page 20
Config-1 Aug 01/06
R
TAI
(3) Digital outputs
This table contains all the output parameters in the digital form.
They are sorted as per the numerical order of their output label.
The following table gives:
- EQ.SYS.LAB.SDI: (SDAC,FWC,DRC___) output label for which the
parameter is available
- PARAMETER DEFINITION: parameter name
- WORD RANGE OPER RANGE RESOLUTION ACCURACY: measurement range.
Maximum value transmitted. When the digital value changes, the
change step is equal to the accuracy
- UNIT: unit in which the digital value is transmitted
- SIG BIT: indicates whether a sign bit is available
- BITS: number of bits used by the parameter in the label
- XMSN/INTV: output transmission interval. The refresh rate is given
in milliseconds
- CODE :
BNR: binary data word
BCD: binary coded decimal data word
ISO: data word coded in ISO5 code
DIS: discrete data word
HEX: hexadecimal coded
HYB: mixed code
- ALPHA CODE: indicates the parameter mnemonic code
- SOURCE ORIGIN: parameter source computer or system.
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 1.270.00 |GPWS DSCRT| | | | | 50 |DIS | | |
| |WORD 1 | | | | | | | | |
| | | | | | | | | | |
| |SINK RATE |bit status 1| | | 11 | | | | |
| | | | | | | | | | |
| |WHOOP |bit status 1| | | 12 | | | | |
| |WHOOP | | | | | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 13 | | | | |
| | | | | | | | | | |
| |DONT |bit status 1| | | 14 | | | | |
| |SINK | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 21
Config-1 Aug 01/06
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 15 | | | | |
| |GEAR | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 16 | | | | |
| |FLAP | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 17 | | | | |
| |TERRAIN | | | | | | | | |
| |(mode 4) | | | | | | | | |
| | | | | | | | | | |
| |GLIDESLOPE|bit status 1| | | 18 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 19 | | | | |
| | | | | | | | | | |
| |TERRAIN - |bit status 1| | | 20 | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |SPARE | | | | 21 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 22 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 23 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 24 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 25 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 26 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 27 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 28 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 29 | | | | |
| | | | | | | | | | |
| 125 |UNIVERSAL | | | | | |BCD | | |
| |TIME | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 22
Config-1 Aug 01/06
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |CORRELA- | | | | | | | | |
| |TION | | | | | | | | |
| | | | | | | | | | |
| 227 |BITE | | | | | |BNR | | |
| |COMMAND | | | | | | | | |
| |WORD | | | | | | | | |
| | | | | | | | | | |
| 260 |DATE | | | | | |BCD | | |
| | | | | | | | | | |
| 356 |CFDIU | | | | | |BNR | | |
| |MAINT WORD| | | | | | | | |
-------------------------------------------------------------------------------
B. Pushbutton Switches
(Ref. Fig. 001)
EFF :
001-050, 053-099, 34-48-00
Page 23
Config-1 Aug 01/06
TAI
(2) FLAP MODE pushbutton switch 7WZ
The pushbutton switch (item 3), when pressed (in) (white OFF legend
on), overrides flap abnormal condition input.
(1) The SYS pushbutton switch, located on the overhead panel 24VU,
provides a FAULT warning indicating that a system fault has been
detected by the GPWC.
(2) When the FAULT legend comes on, all the ground proximity warnings are
inhibited and no GPWC self-test is possible.
(3) When the FAULT legend comes on, messages are displayed on the upper
ECAM display unit (if they are not inhibited by the FWC):
NAV:
- GPWS FAULT (amber) associated with action requested
- GPWS OFF (cyan).
A fault message is sent to the CFDIU.
A GPWS message (amber) is also displayed on the STATUS page on the
lower ECAM display unit.
EFF :
001-050, 053-099, 34-48-00
Page 24
Config-1 Aug 01/06
TAI
6. Operation
_________
A. General
EFF :
001-050, 053-099, 34-48-00
Page 25
Config-1 Aug 01/06
R
TAI
Excessive Rate of Descent
Figure 007
EFF :
001-050, 053-099, 34-48-00
Page 26
Config-1 Aug 01/06
R
TAI
Terrain Cloture Rate - Mode
Figure 008
EFF :
001-050, 053-099, 34-48-00
Page 27
Config-1 Aug 01/06
R
TAI
Descent After Takeoff
Figure 009
EFF :
001-050, 053-099, 34-48-00
Page 28
Config-1 Aug 01/06
R
TAI
Unsafe Terrain Clearance
Figure 010
EFF :
001-050, 053-099, 34-48-00
Page 29
Config-1 Aug 01/06
R
TAI
Descent Below Glide Slope
Figure 011
EFF :
001-050, 053-099, 34-48-00
Page 30
Config-1 Aug 01/06
R
TAI
(3) Inhibitions
Warnings may be cancelled by:
(a) Pressing the EMER CANC key on the ECAM control panel (aural
warning only).
(c) Pressing the G/S MODE pushbutton switch on the overhead panel for
mode 5 (glide slope) visual and aural warning (permanent
inhibition).
(d) Pressing the SYS pushbutton switch on the overhead panel for
inhibition of all the modes (visual and aural warnings).
(4) Faults which prevent normal GPWC operation are stored in the BITE
memory and may be read on the BITE display by operating the STATUS/
HISTORY switch located on the GPWC face below the BITE display.
(3) Inhibitions
Warnings may be cancelled by:
(a) Pressing the EMER CANC key on the ECAM control panel (aural
warning only).
(c) Pressing the G/S MODE pushbutton switch on the overhead panel for
mode 5 (glide slope) visual and aural warning (permanent
inhibition).
(d) Pressing the SYS pushbutton switch on the overhead panel for
inhibition of all the modes (visual and aural warnings).
EFF :
001-050, 053-099, 34-48-00
Page 31
Config-1 Aug 01/06
TAI
(e) The GPWC is automatically inhibited if a stall warning is in
progress.
(4) Faults which prevent normal GPWC operation are stored in the BITE
memory and may be read on the BITE display by operating the STATUS/
HISTORY switch located on the GPWC face below the BITE display. When
the fault is stored, the FAULT legend of the SYS pushbutton switch
comes on.
(a) The mode 1 provides the pilot with an alert/warning for the high
descent rates into terrain. The pilot also receives a timely
alert for rapidly building sink rates near the runway when
landing. The figure shows the outer and inner boundaries whose
penetrations trigger the alert/warnings.
(b) The outer boundary is a straight line which has an equation of:
(c) The penetration of this outer boundary will activate the GPWS
legends and produce the voice warning SINK RATE. This will
continue until the boundary penetration is corrected.
(d) Further penetration of the first boundary will reach the inner
boundary where the voice warning will change from SINK RATE to
WHOOP WHOOP PULL UP. This inner boundary is composed of two
straight lines. The equation which describes the lower line is:
EFF :
001-050, 053-099, 34-48-00
Page 32
Config-1 Aug 01/06
R
TAI
(e) Both boundaries are cut off at the top by a radio altitude of
2450 ft. The lower is cut off at 10 ft. A delay equivalent to 0.8
seconds is included in the upper function to minimize the
warnings caused by the momentary boundary penetration.
(a) The mode 2 provides a warning based on the radio altitude between
the aircraft and the ground and on how rapidly the radio altitude
decreases.
The barometric altitude of the aircraft is not important for the
initiation of this warning.
(c) This mode has two areas of application that are generally
referred to as mode 2A and mode 2B. The mode 2A is applied when
the landing flaps are not down and the aircraft is not in the
glide slope beam. The mode 2B requires that the landing flaps be
down or that the aircraft be in the glide slope beam within +/- 2
dots of deviation during an ILS approach. The figure shows the
warning boundary for the mode 2A (landing flaps up). The closure
rate is the computed change in the radio altitude between the
aircraft and the ground. It is considered positive when the
altitude decreases.
The lower sloped line has an equation of :
(d) The normal upper limit of the boundary is horizontal at 1650 ft.
radio altitude due to a computed maximum closure rate limit of
5733 FPM. As the airspeed increases from 220 Kts up to 310 Kts,
the maximum rate limit is linearly increased to 9800 FPM. This
allows the upper boundary to also linearly increase up to 2450
ft.
The upper boundary is limited at certain airports to reduce the
warning sensitivity and minimize the nuisance warnings.
EFF :
001-050, 053-099, 34-48-00
Page 33
Config-1 Aug 01/06
R
TAI
(e) Upon penetration of the boundary, either on the slope or from the
top, the GPWS legends come on and the voice message is TERRAIN.
If the boundary penetration lasts beyond two TERRAIN messages,
approximately 1.4 seconds, then the warning switches to WHOOP
WHOOP/ PULL UP repeated continuously until the boundary is
departed. The altitude gain feature is automatically activated.
First the altitude at this instant is sampled and stored. The
GPWS legends remain on and the voice message is TERRAIN. After
three hundred feet of altitude are gained from the stored value,
the GPWS legends and voice stop. If another boundary penetration
occurs during this altitude gain time, and it lasts long enough
to restart the PULL UP warning, 1.4 seconds, then the whole
process begins again with a new reference altitude for the 300
ft. after boundary separation.
In this manner the aircraft is directed up and over the terrain
to a safer altitude.
(h) When the envelope boundary conditions for Mode 2B are violated,
the GPWS legends come on, and the voice message is repeated until
the boundary is exited. If the gear or the flaps are up, then the
message will be TERRAIN TERRAIN followed by WHOOP WHOOP PULL UP
if the condition persists. If both gear and flaps are in the
landing configuration, the message will be TERRAIN.
EFF :
001-050, 053-099, 34-48-00
Page 34
Config-1 Aug 01/06
R
TAI
(3) Mode 3 - Insufficient climb performance after takeoff
(Ref. Fig. 009, 010)
(b) Inertially compensated air data signals are used when possible.
IVS is used when valid data is available and barometric altitude
rate is used only when valid IVS is not available and the
internal computed inertial data is not valid. The Mode 3 warning
envelopes are inhibited close to the ground.
EFF :
001-050, 053-099, 34-48-00
Page 35
Config-1 Aug 01/06
R
TAI
(4) Mode 4 - Unsafe terrain clearance
(Ref. Fig. 010)
(a) The mode 4 generates three types of voice warnings based on the
radio altitude, computed airspeed, and aircraft configuration.
The standard upper boundary is at 500 ft. radio altitude. If the
aircraft penetrates this boundary with the landing gear still up,
the voice message will be TOO LOW GEAR. Above 190 Kts airspeed,
the upper boundary increases linearly with airspeed to a maximum
of 1000 ft. radio altitude at 250 Kts or more. Penetrating this
boundary produces a repetitive TOO LOW TERRAIN message. Other
maximums are used at certain airports to minimize the nuisance
warnings.
The mode 4 maximum altitude is lowered from 1000 to 800 ft. of
radio altitude when an overflight is detected. An overflight can
be detected by sensing the sudden change in radio altitude. The
800 ft. limit is maintained for 60 seconds after an overflight to
insure that a nuisance warning is not issued.
(b) When the landing gear or flaps are lowered, the upper boundary
decreases to 245 ft. To maintain the same airspeed expansion
function up to 1000 ft. nominal at 250 Kts, the lower level
corner is at 159 Kts.
Penetration below 159 Kts results in TOO LOW GEAR messages with
gear up or TOO LOW FLAPS message with gear down and flaps not in
landing configuration, while above 159 Kts the message is TOO LOW
TERRAIN.
(c) The equation for the sloped portion of the warning curve is:
(a) The mode 5 provides two levels of warning when the aircraft
flight path descends below the glide slope beam on front course
ILS approaches.
The upper limit of 1000 ft. nominal allows the capture of the
beam before enabling this mode. Other upper limits are used at
certain airports to increase the warning envelope. The deviation
boundaries are shown in dots below the beam where one dot equals
0.0875 DDM. The first warning occurs whenever the aircraft is
more than 1.3 dots below the beam. It is called a soft glide
slope warning because the volume level of the GLIDE SLOPE warning
is approximately one half (- 6 db) that of the other warnings.
EFF :
001-050, 053-099, 34-48-00
Page 36
Config-1 Aug 01/06
R
TAI
A second warning boundary occurs below 300 ft. radio altitude and
below 2 dots deviation. It is called loud glide slope because the
volume level is increased to that of the other warnings.
(b) Both boundaries allow additional deviation below 150 ft. of radio
altitude to allow for normal beam variations near the threshold.
(c) The repetition rate of the GLIDE SLOPE messages also varies as a
function of radio altitude and glide slope deviation. It is slow
at 1000 ft. and 1.3 dots and speeds up as altitude is lowered or
deviation is increased. Actual time between glide slope messages
is controlled by the equation:
(d) The GLIDE SLOPE warning can be manually cancelled by the crew.
This can be done any time below 1000 ft. nominal radio altitude.
Cancel can be reset by ascending above 1000 ft. nominal, or
descending below 30 ft. Cancel can also be reset by reselecting
the ILS frequency in certain installations.
(e) The change from constant deviation to a slope below 150 ft. radio
altitude is shown along with the constant separation 0.7 dots
between the two boundaries. A delay of approximately 0.8 seconds
is inserted between the warning output and the enabling logic
during a warning condition. The delay shall also turn off the
warning output when two successive samples show a loss of the
enabling logic. The repetition rate of the glide slope message is
controlled by the radio altitude and the glide slope deviation as
shown in the equation above.
1
_ Climb above 1000 ft. radio altitude.
2
_ Descent below 30 ft. radio altitude.
3
_ Change of valid ILS select data.
EFF :
001-050, 053-099, 34-48-00
Page 37
Config-1 Aug 01/06
R
TAI
(h) The reset condition must last for at least two successive
processor cycles. A reset condition will inhibit the set command.
(i) The state of the cancel latch must be retained during loss of
computer power.
C. Envelope Modulation
(1) Background
During the past 20 years, experience with GPWS have shown that normal
approaches to certain airports can be incompatible with the normal
warning envelopes and signal filtering.
A number of enhancements to the envelopes and filters have been
developed during this time in an attempt to accommodate these few
airports, without compromising the overall GPWS effectiveness for all
the other normal airport approaches. However, there remain a
limited number of cases which are still not satisfactory despite
these efforts.
All of the noticeable cases have been due to nuisance warnings for
approaches and departures at particular airports. The majority of
nuisance warnings involves mode 2 closure rate due to terrain under
the approach path or rising terrain just before the runway threshold.
Others involve mode 4 terrain clearance warnings during initial
approach. A few mode 1 warnings are the results of steeper than
normal approaches over terrain which slopes down to the runway at
some airports.
A different type of case is the inadequate warning protection during
ILS approaches when the upper limit of mode 5 is 1000 ft. radio
altitude. There are airports located at a significantly higher
altitude than the surrounding terrain. In some instances this
difference is over 1000 ft., thus requiring the aircraft to be below
the runway elevation before a mode 5 warning is possible during most
of the approach.
Until recently there has been no reasonable way to accomodate these
few special cases without compromising the GPWC at all other
airports.
What is needed is the ability to recognize when the aircraft is
approaching one of these airports and then adjust the warning
criteria to suit the particular approach.
The availability of accurate, low drift, latitude and longitude
information from the latest generation inertial navigation equipment
now makes individual airport recognition possible. After recognizing
the approach to or departure from one of these airports, it is also
important to verify the aircraft is at a reasonable altitude before
desensitizing any warning criteria. If the aircraft is already low,
further warning reduction is not desirable.
EFF :
001-050, 053-099, 34-48-00
Page 38
Config-1 Aug 01/06
R
TAI
(2) Functional description - A reasonable altitude is verified in one of
two ways.
- for the ILS approaches, the glide slope deviation is used to verify
a normal approach,
- when the ILS information is not available, terrain and altitude
matching is used to verify a normal approach.
The following input data are used for airport recognition:
- latitude position from the FMGC or the ADIRU
- longitude position from the FMGC or the ADIRU
- glide slope deviation from the ILS
- localizer deviation from the ILS
- aircraft magnetic track angle from the FMGC or the ADIRU
- runway course from the ILS
- corrected barometric altitude from the ADIRU
- QNH or QFE mode of baro altitude correction via program pin. QNH
mode is baro altitude correction to sea level. QFE mode is selected
with a program pin for baro altitude correction to the airport
field elevation.
- radio altitude.
Latitude and longitude data are continuously monitored for the
airport locations. Additional data processing for envelope modulation
is not required until the aircraft approaches one of the airports.
Then the other data inputs are checked for a normal approach before
any warning envelopes are modulated.
The FMGC is the preferred source for latitude and longitude data
because these data were corrected for the normal drift of the ADIRU
basic latitude and longitude data. If the FMGC data are invalid, or
missing, then the GPWC will automatically switch back to the ADIRU
data.
EFF :
001-050, 053-099, 34-48-00
Page 39
Config-1 Aug 01/06
R
TAI
altitudes. The gear down requirement is also removed during warning
expansion, to allow gear up warnings.
(a) EUROPE
ALICANTE SPAIN ILS RWY 11
GENEVA SWITZERLAND ILS RWY 05
NURNBERG GERMANY R.V. TO ILS OR NDB RWY 28
TENERIFE CANARY IS. ILS RWY 30
(e) PACIFIC
AGANA NAS (A) GUAM IS. ILS RWY 6L
AGANA NAS (B+C) GUAM IS. ILS RWY 6L
HIROSHIMA JAPAN I.A. NDB LOC RWY 4
TAIPEI TAIWAN ILS-1 RWY 10
EFF :
001-050, 053-099, 34-48-00
Page 40
Config-1 Aug 01/06
R
TAI
GPWC - Generation and Inhibition
Figure 012
EFF :
001-050, 053-099, 34-48-00
Page 41
Config-1 Aug 01/06
R
TAI
PRIORITY TRIGGER WARNING MODE
1 No warn - -
2 Pull-up WHOOP WHOOP, PULL UP 1, 2
3 Terrain TERRAIN 2
4 Too low TOO LOW 3
5 Too low terrain TOO LOW TERRAIN 4
6 Too low gear TOO LOW GEAR 4
7 Too low flaps TOO LOW FLAPS 4
8 N/A N/A N/A
9 Sink rate SINK RATE 1
10 Dont sink gear DONT SINK GEAR 3
11 Dont sink DONT SINK 3
12 Glide slope GLIDE SLOPE 5
The voice warning circuits also contain logic elements which ensure that:
- only one message at a time is output.
- higher priority messages interrupt lower priority messages.
- a triggered message is completed even when warning condition ceases.
- a 0.75 s pause exists between warning messages.
The voice warning circuits are inhibited by the priority 1 input (no
warn). The priority 1 input is present if the internally generated master
valid signal is lost or the momentary audio suppress discrete is present.
Should the master valid signal be recovered or the momentary audio
suppress discrete be removed, the priority 1 input is cancelled and the
previous warning will return (providing the associated warning envelope
is still penetrated).
Mode 5 GLIDE SLOPE warnings can only be cancelled by pressing the G/S
MODE pushbutton switch on the overhead panel 21VU.
7. ____
Test
The GPWC interruptive self-test facility provides the following test modes:
- airborne self-test
- ground self-test
- ground vocabulary test
- status/history test.
EFF :
001-050, 053-099, 34-48-00
Page 42
Config-1 Aug 01/06
R
TAI
GPWC - Warning Mode and Maintenance Word Format
Figure 013
EFF :
001-050, 053-099, 34-48-00
Page 43
Config-1 Aug 01/06
R
TAI
A. Airborne Self-test
(1) The airborne self-test is enabled when the following conditions are
met:
- radio altitude input is greater than 1000 ft. and valid and
airspeed is greater than 90 Kts
- the GPWS/G/S pushbutton switch has been pressed.
(2) With no system faults present, the GPWC generates the following
warning sequence:
B. Ground Self-Test
(1) The ground self-test presents the same test sequence as the airborne
test but also includes an internal check. The internal test is
enabled by a radio altitude input indicating an altitude below 5 ft.,
and computed airspeed below 60 Kts. The test is initiated by pressing
and holding the GPWS/G/S pushbutton switch for 0.5 seconds.
(2) Upon initiation of the test, providing there are no faults present,
the sequence will start. Between the first and second sequence steps
(soft GLIDE SLOPE and WHOOP WHOOP PULL UP broadcasts) an internal
check is made of the following:
- processor instruction set
- program memory contents
- voice memory contents.
The internal clock must not exceed four seconds.
EFF :
001-050, 053-099, 34-48-00
Page 44
Config-1 Aug 01/06
TAI
A. Airborne Self-test
(1) The airborne self-test is enabled when the following conditions are
met:
- radio altitude input is greater than 1000 ft. and valid and
airspeed is greater than 90 Kts
- the PULL UP/GPWS pushbutton switch has been pressed.
(2) With no system faults present, the GPWC generates the following
warning sequence:
B. Ground Self-Test
(1) The ground self-test presents the same test sequence as the airborne
test but also includes an internal check. The internal test is
enabled by a radio altitude input indicating an altitude below 5 ft.,
and computed airspeed below 60 Kts. The test is initiated by pressing
and holding the PULL UP/GPWS pushbutton switch for 0.5 seconds.
(2) Upon initiation of the test, providing there are no faults present,
the sequence will start. Between the first and second sequence steps
(soft GLIDE SLOPE and WHOOP WHOOP PULL UP broadcasts) an internal
check is made of the following:
- processor instruction set
- program memory contents
- voice memory contents.
The internal clock must not exceed four seconds.
NOTE : Fault to observe the above procedure will initiate the ground self
____
test.
EFF :
001-050, 053-099, 34-48-00
Page 45
Config-1 Aug 01/06
R
TAI
The test sequence is as follows:
(1) Verify that the system status is correct for the ground test (radio
altitude < 5 ft., computed airspeed below 60 kts).
(2) Carry out the internal tests as detailed in the ground self-test.
(3) Carry out the output sequence of the ground self-test of the GPWC.
(1) The test is controlled by the STATUS/HISTORY switch on the GPWC. The
results are depicted on an 8-character BITE display also located on
the face of the GPWC. The STATUS test is initiated if you momentarily
select PRESENT STATUS with the STATUS/HISTORY switch. The HISTORY
test is initiated if you momentarily select FLIGHT HISTORY with the
STATUS/HISTORY switch.
The STATUS test will depict the status of the latest flight
information. The HISTORY test will depict the information related to
the last ten flights. Both tests commence with ALL SEGMENTS TEST and
terminate with END TEST messages.
The computer faults are indicated by the message GPWC FAILED or FLT
HIST INVALID. All other fault messages indicate an incorrect input
condition.
EFF :
001-050, 053-099, 34-48-00
Page 46
Config-1 Aug 01/06
R
TAI
Status/History Test Readouts
Figure 014
EFF :
001-050, 053-099, 34-48-00
Page 47
Config-1 Aug 01/06
R
TAI
IN TEST INVALID LAMPTEST
END TEST INACTIVE AUDIO
GPWS OK INHIBIT SELECT
GPWC PREVIOUS FLIGHT-0
RADIO TEN FLIGHT-1
ALTIMETR FLIGHTS FLIGHT-2
BARORATE OK FLIGHT-3
AIRSPEED FAILED FLIGHT-4
ALTITUDE AIR DATA FLIGHT-5
GLIDE ILS DATA FLIGHT-6
SLOPE IRS DATA FLIGHT-7
CANCEL EXTERNAL FLIGHT-8
COURSE FLT HIST FLIGHT-9
GEAR INPUT CORRECTD
RUNWAY PROCESSR LOCALIZR
HEADING OUTPUT LATITUDE
FLAPS ASSEMBLY LONGITUD
EFF :
001-050, 053-099, 34-48-00
Page 48
Config-1 Aug 01/06
R
TAI
(4) Examples of the HISTORY test vocabulary are:
(6) If the history test message you read is too long, you can stop the
test. To do this, you must set the STATUS/HISTORY switch to PRESENT
STATUS until the BITE display is blank. The display will then show
CANCEL followed by END TEST. This operation will have no adverse
effect on the data held in the flight history memory.
(7) The sequences of the flight history test and those of the present
status test will not activate the cockpit voice outputs.
E. CFDS Interface
EFF :
001-050, 053-099, 34-48-00
Page 49
Config-1 Aug 01/06
R
TAI
In case of fault detection, the BITE stores the information in
the fault memories.
These items of information are transmitted to the CFDIU every 100
ms by an ARINC 429 message with label 356.
EFF :
001-050, 053-099, 34-48-00
Page 50
Config-1 Aug 01/06
R
TAI
Maintenance Test Procedure - Sub-Menu Function 1/3
Figure 015
EFF :
001-050, 053-099, 34-48-00
Page 51
Config-1 Aug 01/06
R
TAI
Maintenance Test Procedure - Sub-Menu Function 2/3
Figure 016
EFF :
001-050, 053-099, 34-48-00
Page 52
Config-1 Aug 01/06
TAI
Maintenance Test Procedure - Sub-Menu Function 3/3
Figure 017
EFF :
001-050, 053-099, 34-48-00
Page 53
Config-1 Aug 01/06
TAI
**ON A/C ALL
1. General
_______
The purpose of the Enhanced Ground Proximity Warning System (Enhanced GPWS)
is to alert the flight crew of potentially hazardous conditions with respect
to the terrain.
The system achieves this objective by accepting a variety of aircraft
parameters as inputs, applying alerting algorithms, and providing the flight
crew with aural alert messages and visual annunciations and displays in the
event that the boundaries of any alerting envelope are exceeded.
The Enhanced GPWC, will be able to use preferably GPS position when
available on board and to activate peaks and/or obstacle functions with
EFIS/EIS1/EIS2 display.
Enhanced features have been added to existing basic Ground Proximity Warning
Modes 1 to 5 which are the backbone of the system. The primary design
objective has been to maintain the integrity of these modes independent of
the other functions. For example, loss of the Terrain Awareness Display
(TAD) function does not affect the operation of the basic GPWS modes. Also,
loss of basic GPWS modes does not affect TAD function.
The following illustration provides an overall system block diagram.
(Ref. Fig. 001)
EFF :
ALL 34-48-00
Page 1
Config-2 Feb 01/09
TAI
Enhanced GPWS - Enhanced Ground Proximity Warning System
Figure 001
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-229, 301-311, 401-404,
34-48-00
Page 2
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-211, 215-215, 219-299, 301-302, 306-309, 312-399,
R 401-499,
R Post SB 34-1345 For A/C 201-203,211-211,215-215,219-229,301-302,306-309,
R 401-404,
R Post SB 34-1352 For A/C 201-203,211-211,215-215,219-229,301-302,306-309,
R 401-404,
The purpose of the Enhanced Ground Proximity Warning System (Enhanced GPWS)
is to alert the flight crew of potentially hazardous conditions with respect
to the terrain.
The system achieves this objective by accepting a variety of aircraft
parameters as inputs, applying alerting algorithms, and providing the flight
crew with aural alert messages and visual annunciations and displays in the
event that the boundaries of any alerting envelope are exceeded.
The Enhanced GPWC, will be able to use preferably GPS position when
available on board and to activate peaks and/or obstacle functions with
EFIS/EIS1/EIS2 display.
Two architectures will be available to receive GPS data. The first one using
the ADIRS connection as GPS data are transmitted via the IRS bus, and the
second one will be a direct connection between Enhanced GPWS and GPS sensor
(MMR or GPSSU) if ADIRS is not able to transmit GPS data.
NOTE : Enhanced GPWS will then use preferably GPS and corrected IRS latitude
____
and longitude data as valid position source, if these position are
downgraded, then FMS position will be used.
Enhanced features have been added to existing basic Ground Proximity Warning
Modes 1 to 5 which are the backbone of the system. The primary design
objective has been to maintain the integrity of these modes independent of
the other functions. For example, loss of the Terrain Awareness Display
(TAD) function does not affect the operation of the basic GPWS modes. Also,
loss of basic GPWS modes does not affect TAD function.
The following illustration provides an overall system block diagram.
(Ref. Fig. 001A)
Several main alerting functional areas are integrated into the Enhanced
GPWC, which is a single Line Replaceable Unit (LRU). Except for basic GPWS,
each function is pin selectable.
The functional areas are:
- basic Ground Proximity Warning System (GPWS) (Modes 1 to 5),
- Terrain Clearance Floor function (TCF),
- Terrain Awareness and Display (TAD) function.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-48-00
Page 3
Config-2 Nov 01/08
TAI
Enhanced GPWS - Enhanced Ground Proximity Warning System
Figure 001A
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page 4
Config-2 Nov 01/08
TAI
R **ON A/C ALL
Several main alerting functional areas are integrated into the Enhanced
GPWC, which is a single Line Replaceable Unit (LRU). Except for basic GPWS,
each function is pin selectable.
The functional areas are:
- basic Ground Proximity Warning System (GPWS) (Modes 1 to 5),
- Terrain Clearance Floor function (TCF),
- Terrain Awareness and Display (TAD) function.
- peaks function,
- obstacle function.
B. Enhanced Features
The Enhanced GPWC includes enhanced features which complete the basic
GPWS modes.
EFF :
ALL 34-48-00
Page 5
Config-2 Feb 01/09
TAI
(2) Terrain Awareness alerting and Display (TAD) function
A major new feature of the Enhanced GPWS is the incorporation of the
terrain awareness alerting and display functions. These functions use
aircraft geographic position, aircraft altitude and a terrain data
base to predict potential conflicts between the aircraft flight path
and the terrain, and to provide graphic displays of the conflicting
terrain, as illustrated by the block diagram.
(Ref. Fig. 002)
The terrain awareness alerting algorithms continuously compute
terrain clearance envelopes ahead of the aircraft. If the boundaries
of these envelopes conflict with terrain elevation data in the
terrain database, then alerts are issued.
EFF :
ALL 34-48-00
Page 6
Config-2 Nov 01/08
TAI
Enhanced GPWS - Terrain Awareness Functions
Figure 002
EFF :
ALL 34-48-00
Page 7
Config-2 May 01/08
R
TAI
(4) GPS position
When available on board, EGPWS will use preferably GPS, then IRS
latitude and longitude data as valid position source and, if these
positions are downgraded, then FMS position will be used.
When EGPWS is pin programmed to use GPS position, then geometric
altitude is also activated.
2. __________________
Component Location
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
1WZ GPWC 88VU 128 824 34-48-34
4WZ P/BSW-GPWS/G/S 500VU 212 831 34-48-00
5WZ P/BSW-GPWS/G/S 301VU 211 831 34-48-00
7WZ P/BSW-GPWS/FLAP MODE 21VU 211 831 34-48-00
9WZ P/BSW-GPWS/SYS 21VU 211 831 34-48-00
11WZ P/BSW-GPWS/G/S MODE 21VU 211 831 34-48-00
13WZ P/BSW-GPWS/LDG FLAP 3 21VU 211 831 34-48-00
30WZ1 P/BSW-TERR ON ND,CAPT 403VU 211 831 34-48-00
30WZ2 P/BSW-TERR ON ND,F/O 402VU 212 831 34-48-00
31WZ P/BSW-GPWS/TERR 21VU 211 831 34-48-00
32WZ RELAY-TERRAIN/WEATHER RADAR 1 DATA 187VU 127 824 34-48-00
SWITCHING, F/O
33WZ RELAY-TERRAIN/WEATHER RADAR 1 DATA 187VU 127 824 34-48-00
SWITCHING, CAPT
EFF :
ALL 34-48-00
Page 8
Config-2 Nov 01/08
TAI
Enhanced GPWS - Component Location 1/2
Figure 003
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page 9
Config-2 Nov 01/08
TAI
Enhanced GPWS - Component Location 1/2
Figure 003A
R
EFF :
ALL 34-48-00
Page 10
Config-2 Feb 01/08
TAI
Enhanced GPWS - Component Location 2/2
Figure 004
R
EFF :
201-203, 34-48-00
Page 11
Config-2 Feb 01/08
TAI
R **ON A/C 001-050, 053-099, 211-212, 215-215, 218-299, 301-399, 401-499,
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
1WZ GPWC 88VU 128 824 34-48-34
4WZ P/BSW-PULL UP/GPWS 500VU 212 831 34-48-00
5WZ P/BSW-PULL UP/GPWS 301VU 211 831 34-48-00
7WZ P/BSW-GPWS/FLAP MODE 21VU 211 831 34-48-00
9WZ P/BSW-GPWS/SYS 21VU 211 831 34-48-00
11WZ P/BSW-GPWS/G/S MODE 21VU 211 831 34-48-00
13WZ P/BSW-GPWS/LDG FLAP 3 21VU 211 831 34-48-00
30WZ1 P/BSW-TERR ON ND,CAPT 403VU 211 831 34-48-00
30WZ2 P/BSW-TERR ON ND,F/O 402VU 212 831 34-48-00
31WZ P/BSW-GPWS/TERR 21VU 211 831 34-48-00
32WZ RELAY-TERRAIN/WEATHER RADAR 1 DATA 187VU 127 824 34-48-00
SWITCHING, F/O
33WZ RELAY-TERRAIN/WEATHER RADAR 1 DATA 187VU 127 824 34-48-00
SWITCHING, CAPT
34WZ RELAY-WEATHER RADAR 2 DATA CUTOFF, 188VU 128 824 34-48-00
F/O
35WZ RELAY-WEATHER RADAR 2 DATA CUTOFF, 188VU 128 824 34-48-00
CAPT
R
EFF : 001-050, 053-099, 211-212, 215-215,
218-299, 301-399, 401-499,
34-48-00
Page 12
Config-2 Nov 01/08
TAI
Enhanced GPWS - Component Location 2/2
Figure 004A
R
EFF : 001-050, 053-099, 211-212, 215-215,
218-299, 301-399, 401-499,
34-48-00
Page 13
Config-2 Nov 01/08
TAI
R **ON A/C 053-099, 211-212, 215-215, 218-222, 301-306,
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
1WZ GPWC 88VU 128 824 34-48-34
4WZ P/BSW-GPWS/G/S 500VU 212 831 34-48-00
5WZ P/BSW-GPWS/G/S 301VU 211 831 34-48-00
7WZ P/BSW-GPWS/FLAP MODE 21VU 211 831 34-48-00
9WZ P/BSW-GPWS/SYS 21VU 211 831 34-48-00
11WZ P/BSW-GPWS/G/S MODE 21VU 211 831 34-48-00
13WZ P/BSW-GPWS/LDG FLAP 3 21VU 211 831 34-48-00
30WZ1 P/BSW-TERR ON ND,CAPT 403VU 211 831 34-48-00
30WZ2 P/BSW-TERR ON ND,F/O 402VU 212 831 34-48-00
31WZ P/BSW-GPWS/TERR 21VU 211 831 34-48-00
32WZ RELAY-TERRAIN/WEATHER RADAR 1 DATA 187VU 127 824 34-48-00
SWITCHING, F/O
33WZ RELAY-TERRAIN/WEATHER RADAR 1 DATA 187VU 127 824 34-48-00
SWITCHING, CAPT
34WZ RELAY-WEATHER RADAR 2 DATA CUTOFF, 188VU 128 824 34-48-00
F/O
35WZ RELAY-WEATHER RADAR 2 DATA CUTOFF, 188VU 128 824 34-48-00
CAPT
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
1WZ GPWC 88VU 128 824 34-48-34
4WZ P/BSW-PULL UP/GPWS 500VU 212 831 34-48-00
5WZ P/BSW-PULL UP/GPWS 301VU 211 831 34-48-00
7WZ P/BSW-GPWS/FLAP MODE 21VU 211 831 34-48-00
9WZ P/BSW-GPWS/SYS 21VU 211 831 34-48-00
11WZ P/BSW-GPWS/G/S MODE 21VU 211 831 34-48-00
13WZ P/BSW-GPWS/LDG FLAP 3 21VU 211 831 34-48-00
30WZ1 P/BSW-TERR ON ND,CAPT 403VU 211 831 34-48-00
30WZ2 P/BSW-TERR ON ND,F/O 402VU 212 831 34-48-00
31WZ P/BSW-GPWS/TERR 21VU 211 831 34-48-00
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-222, 301-306,
34-48-00
Page 14
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
FIN | FUNCTIONAL DESIGNATION | PANEL|ZONE|ACCESS | ATA
| | | | DOOR | REF.
-------------------------------------------------------------------------------
32WZ RELAY-TERRAIN/WEATHER RADAR 1 DATA 187VU 127 824 34-48-00
SWITCHING, F/O
33WZ RELAY-TERRAIN/WEATHER RADAR 1 DATA 187VU 127 824 34-48-00
SWITCHING, CAPT
3. __________________
System Description
A. General
The Enhanced GPWS monitors data inputs from the navigation sensors. This
information is used to provide suitable aural and visual warnings to
alert the crew of a hazardous situation with respect to the terrain.
B. Warnings
Warnings are generated by the Enhanced GPWC which is installed on the
shelf 88VU, in the aft electronics rack 80VU.
Aural warnings are broadcast from the cockpit loud speakers.
EFF :
ALL 34-48-00
Page 15
Config-2 May 01/08
R
TAI
Enhanced GPWC - Inputs and Outputs (Buses)
Figure 005
R
EFF :
201-203, 34-48-00
Page 16
Config-2 Nov 01/07
TAI
R **ON A/C 211-212, 215-215, 218-225, 301-307,
R
EFF : 001-050, 053-099, 211-212, 215-215,
218-225, 301-307,
34-48-00
Page 17
Config-2 Nov 01/08
TAI
Enhanced GPWC - Inputs and Outputs (Buses)
Figure 005A
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 18
Config-2 Nov 01/08
TAI
Enhanced GPWC - Inputs and Outputs (Buses)
R Figure 005B
R
EFF :
001-050, 053-099, 34-48-00
Page 19
Config-2 Feb 01/08
TAI
**ON A/C 053-099,
R
EFF :
053-099, 201-203, 34-48-00
Page 20
Config-2 May 01/08
TAI
Enhanced GPWC - Inputs and Outputs (Buses)
Figure 005C
R
EFF :
053-099, 34-48-00
Page 21
Config-2 May 01/08
TAI
R Enhanced GPWC - Inputs and Outputs (Buses)
R Figure 005D
R
EFF :
201-203, 34-48-00
Page 22
Config-2 Feb 01/08
TAI
R **ON A/C 211-211, 215-215, 219-299, 301-302, 306-309, 312-399, 401-499,
R
EFF : 211-211, 215-215, 219-299, 301-302,
306-309, 312-399, 401-499,
34-48-00
Page 23
Config-2 Nov 01/08
TAI
Enhanced GPWC - Inputs and Outputs (Buses)
Figure 005E
R
EFF :
306-307,
211-211, 215-215, 219-225, 301-302, 34-48-00
Page 24
Config-2 Nov 01/08
TAI
Enhanced GPWC - Inputs and Outputs (Buses)
R Figure 005F
R
EFF :
226-299, 308-309, 312-399, 401-499, 34-48-00
Page 25
Config-2 Feb 01/08
TAI
**ON A/C 211-212, 215-215, 218-229, 301-311, 401-404,
R
EFF :
401-499,
211-212, 215-215, 218-299, 301-399, 34-48-00
Page 26
Config-2 Feb 01/09
TAI
Enhanced GPWC - Inputs (Discretes)
Figure 006
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page 27
Config-2 Nov 01/08
TAI
Enhanced GPWC - Inputs (Discretes)
Figure 006A
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-229, 301-311, 401-404,
34-48-00
Page 28
Config-2 Feb 01/09
TAI
Enhanced GPWC - Inputs (Discretes)
Figure 006B
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page 29
Config-2 Feb 01/09
TAI
**ON A/C 211-212, 215-215, 218-299, 301-399, 401-499,
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-48-00
Page 30
Config-2 Feb 01/09
TAI
R - GPWS/FLAP MODE pushbutton switch which, when pressed (in) (white OFF
R legend on), overrides a flap abnormal condition input,
R - GPWS/SYS pushbutton switch which, when pressed (in) (white OFF legend
R on), inhibits Modes 1 to 5 warnings,
R - GPWS/G/S MODE pushbutton switch which, when pressed (in) (white OFF
R legend on), overrides the glide slope mode,
R - GPWS/G/S pushbutton switch which, when pressed (in), enables the
R Enhanced GPWC to perform test,
R - GPWS/TERR pusbutton switch which, when pressed (in) (white OFF legend
R on), inhibits TAD and TCF functions,
R - TERR ON ND (CAPT or F/O) pushbutton switches allow the crew to select
R or deselect terrain display on NDs,
R - Weather Radar control unit.
R
EFF :
001-050, 053-099, 201-203, 34-48-00
Page 31
Config-2 Feb 01/09
TAI
R - PULL UP/GPWS pushbutton switch which, when pressed (in), enables the
R Enhanced GPWC to perform test,
R - GPWS/TERR pusbutton switch which, when pressed (in) (white OFF legend
R on), inhibits TAD and TCF functions,
R - TERR ON ND (CAPT or F/O) pushbutton switches allow the crew to select
R or deselect terrain display on NDs,
R - Weather Radar control unit.
E. Warning Outputs
(Ref. Fig. 007A)
- two discrete outputs from the Enhanced GPWC control the GPWS/G/S
pushbutton switches located on Captain and First Officer main
instrument panels.
Each pushbutton switch is a momentary-action pushbutton switch with an
illuminated split legend cap. The upper legend identified GPWS,
controlled by the first output, comes on red when a ground proximity
warning is generated by the Enhanced GPWC for Modes 1 to 4 or TAD and
TCF warnings.
The lower legend identified G/S, controlled by the second output, comes
on amber when a glide slope (Mode 5) caution alert is generated by the
Enhanced GPWC.
The pushbutton switch provides a facility to cancel a glide slope
warning, if in progress, or to initiate an Enhanced GPWS self-test.
- both discrete outputs are also used to inhibit TCAS and automatic call
out when the GPWS or G/S warnings are in progress.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page 32
Config-2 Feb 01/09
TAI
Enhanced GPWC - Outputs
Figure 007
R
EFF :
238-299, 405-499, 34-48-00
Page 33
Config-2 Feb 01/09
TAI
Enhanced GPWC - Outputs
Figure 007A
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page 34
Config-2 Feb 01/09
TAI
Enhanced GPWC - Outputs
Figure 007B
R
EFF : 001-050, 053-099, 212-212, 218-218,
223-229, 303-304, 307-311, 401-404,
34-48-00
Page 35
Config-2 Feb 01/09
TAI
Enhanced GPWC - Outputs
Figure 007C
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-237, 301-399, 401-404,
34-48-00
Page 36
Config-2 Feb 01/09
TAI
- both discrete outputs are also used for the Digital Flight Data
Recorder (DFDR).
-------------------------------------------------------------------------------
NAME ELECTRICAL LEVEL TO SIGNAL STATUS
-------------------------------------------------------------------------------
FAULT LEGEND GND/OC SYS P/BSW/SDACs GND = VALID
G/S VISUAL ALERT GND/OC FWCs GND = VALID
GPWS LEGEND GND/OC FWCs GND = VALID
-------------------------------------------------------------------------------
E. Warning Outputs
- Two discrete outputs from the Enhanced GPWC control the PULL UP/GPWS
pushbutton switches located on Captain and First Officer main
instrument panels.
Each pushbutton switch is a momentary-action pushbutton switch with an
illuminated split legend cap.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 238-299, 301-306, 405-499,
34-48-00
Page 37
Config-2 Feb 01/09
TAI
The upper legend identified PULL UP, controlled by the first output,
comes on red when a ground proximity warning message including PULL UP
is generated by the Enhanced GPWC.
The lower legend identified GPWS, controlled by the second output,
comes on amber for all the other alerts.
The pushbutton switch provides a facility to cancel a glide slope
warning.
- Both discrete outputs are also used to inhibit TCAS and automatic call
out when the PULL UP or GPWS warnings are in progress.
- Both discrete outputs are also used for the Digital Flight Data
Recorder (DFDR).
-------------------------------------------------------------------------------
NAME ELECTRICAL LEVEL TO SIGNAL STATUS
-------------------------------------------------------------------------------
FAULT LEGEND GND/OC SYS P/BSW/SDACs GND = VALID
GPWS ALERT GND/OC FWCs GND = VALID
GPWS LEGEND GND/OC FWCs GND = VALID
-------------------------------------------------------------------------------
E. Warning Outputs
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-48-00
Page 38
Config-2 Feb 01/09
TAI
**ON A/C 053-099, 223-237, 307-399, 401-404,
- two discrete outputs from the Enhanced GPWC control the PULL UP/GPWS
pushbutton switches located on Captain and First Officer main
instrument panels.
Each pushbutton switch is a momentary-action pushbutton switch with an
illuminated split legend cap. The upper legend identified PULL UP,
controlled by the first output, comes on red when a ground proximity
warning message including PULL UP is generated by the Enhanced GPWC.
The lower legend identified GPWS, controlled by the second output,
comes on amber when a glide slope (Mode 5) caution alert is generated
by the Enhanced GPWC.
The pushbutton switch provides a facility to cancel a glide slope
warning, if in progress, or to initiate an Enhanced GPWS self-test.
- both discrete outputs are also used to inhibit TCAS and automatic call
out when the PULL UP or GPWS warnings are in progress.
- both discrete outputs are also used for the Digital Flight Data
Recorder (DFDR).
-------------------------------------------------------------------------------
NAME ELECTRICAL LEVEL TO SIGNAL STATUS
-------------------------------------------------------------------------------
FAULT LEGEND GND/OC SYS P/BSW/SDACs GND = VALID
GPWS ALERT GND/OC FWCs GND = VALID
PULL UP LEGEND GND/OC FWCs GND = VALID
-------------------------------------------------------------------------------
F. Monitor Outputs
There are two monitor outputs:
- GPWS monitor output controls the FAULT legend of the SYS pushbutton
switch and indicates a failure of Modes 1 to 5,
- TERR monitor output controls the FAULT legend of the TERR pushbutton
switch and indicates a failure of TAD and TCF functions.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-237, 301-399, 401-404,
34-48-00
Page 39
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
NAME ELECTRICAL LEVEL TO SIGNAL STATUS
-------------------------------------------------------------------------------
GPWS MONITOR OUTPUT GND/OC BOARD-ANN LT GND=FAULT
TEST and INTFC
SDAC1
SDAC2
TERR MONITOR OUTPUT GND/OC BOARD-ANN LT GND=FAULT
TEST and INTFC
SDAC1
SDAC2
-------------------------------------------------------------------------------
F. Monitor Outputs
There are three monitor outputs:
- GPWS monitor output controls the FAULT legend of the SYS pushbutton
switch and indicates a failure of Modes 1 to 5,
- TERR monitor output controls the FAULT legend of the TERR pushbutton
switch and indicates a failure of TAD and TCF functions.
- TERR NOT AVAIL output allows FWC to generate a TERR STBY ECAM memo.
This output is triggered when EGPWS is valid but the TAD/TCF function
cannot be temporarily computed.
-------------------------------------------------------------------------------
NAME ELECTRICAL LEVEL TO SIGNAL STATUS
-------------------------------------------------------------------------------
GPWS MONITOR OUTPUT GND/OC BOARD-ANN LT GND=FAULT
TEST and INTFC
SDAC1
SDAC2
TERR MONITOR OUTPUT GND/OC BOARD-ANN LT GND=FAULT
TEST and INTFC
SDAC1
SDAC2
TERR NOT AVAIL MONITOR OUTPUT GND/OC SDAC1 GND=FAULT
SDAC2
-------------------------------------------------------------------------------
R
EFF :
ALL 34-48-00
Page 40
Config-2 Feb 01/09
TAI
**ON A/C ALL
G. Bus Output
The bus output is used by the Aircraft Integrated Data System (AIDS),
Data Management Unit (DMU) and by the Centralized Fault Display Interface
Unit (CFDIU) for test causes.
H. Audio Output
The audio output is used by the cockpit loud speakers for aural warning
messages.
4. ____________
Power Supply
The Enhanced GPWC power supply circuits receive 115VAC, 400 Hz, single phase
(22 W max.) supply from the aircraft AC power.
EFF :
ALL 34-48-00
Page 41
Config-2 Feb 01/09
R
TAI
R **ON A/C ALL
The Enhanced GPWC power supply circuits receive 115VAC, 400 Hz, single phase
(22 W max.) and 28VDC supply from the aircraft AC power.
|----------------------------------------------------------------------------|
| Voltage | C/B FIN | Designation |
|------------------|---------------------|-----------------------------------|
| 28VDC | 2WZ | 101PP BUS 1 |
| | | |
| 115VAC | 3WZ | 103XP BUS1 |
|----------------------------------------------------------------------------|
R
EFF :
ALL 34-48-00
Page 42
Config-2 Feb 01/09
TAI
**ON A/C ALL
5. Interface
_________
A. Digital Outputs
This table contains all the output parameters in digital form.
They are sorted as per the numerical order of their output label.
The following table gives:
- EQ.SYS.LAB.SDI: output label for which the parameter is available,
- PARAMETER DEFINITION: parameter name,
- WORD RANGE/OPER RANGE/RESOLUTION ACCURACY: measurement range. Maximum
value transmitted. When the digital value changes, the change step is
equal to the accuracy,
- UNIT: unit in which the digital value is transmitted,
- SIG BIT: indicates whether a sign bit is available,
- BITS: number of bits used by the parameter in the label,
- XMSN/INTV: output transmission interval. The refresh rate is given in
milliseconds,
- CODE:
BNR: binary data word
BCD: binary coded decimal data word
ISO: data word coded in ISO5 code
DIS: discrete data word
HEX: hexadecimal coded
HYB: mixed code
- ALPHA CODE: indicates the parameter mnemonic code,
- SOURCE ORIGIN: parameter source computer or system.
R
EFF :
ALL 34-48-00
Page 43
Config-2 Feb 01/09
TAI
INTENTIONALLY BLANK
R
34-48-00
Page 44
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 1.270.00 |ENH. GPWS |(1=voice on)| | | | 50 |DIS | | |
| |ALER DSCRT| | | | | to | | | |
| |WORD 1 | | | | |100 | | | |
| | | | | | | | | | |
| |SINKRATE- |bit status 1| | | 11 | | | | |
| |PAUSE- | | | | | | | | |
| |SINKRATE | | | | | | | | |
| | | | | | | | | | |
| |PULL UP |bit status 1| | | 12 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 13 | | | | |
| | | | | | | | | | |
| |DONT SINK|bit status 1| | | 14 | | | | |
| |-PAUSE- | | | | | | | | |
| |DONT SINK| | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 15 | | | | |
| |GEAR | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 16 | | | | |
| |FLAPS | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 17 | | | | |
| |TERRAIN | | | | | | | | |
| | | | | | | | | | |
| |GLIDESLOPE|bit status 1| | | 18 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 19 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 20 | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 22 | | | | |
| |AHEAD PULL| | | | | | | | |
| |UP | | | | | | | | |
| | | | | | | | | | |
EFF :
201-203, 34-48-00
Page 45
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 24 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 25 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 27 | | | | |
| |AHEAD | | | | | | | | |
| | | | | | | | | | |
| |SPARE | | | | 28 | | | | |
| | | | | | | | | | |
| |Reserved | | | | 29 | | | | |
| |for obsta.| | | | | | | | |
| |voice | | | | | | | | |
| 1.274.00 |ENH. GPWS |(1= on) | | | | 50 |DIS | | |
| |ALER DSCRT| | | | | to | | | |
| |WORD 2 | | | | |100 | | | |
| | | | | | | | | | |
| |G/S CANCEL|bit status 1| | | 11 | | | | |
| | | | | | | | | | |
| |GPWS ALERT|bit status 1| | | 12 | | | | |
| | | | | | | | | | |
| |GPWS |bit status 1| | | 13 | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |GPWS INOP |bit status 1| | | 14 | | | | |
| | | | | | | | | | |
| |WINDSHEAR |bit status 1| | | 15 | | | | |
| |WARNING | | | | | | | | |
| |(IF WR/PWS| | | | | | | | |
| |INSTALLED)| | | | | | | | |
| | | | | | | | | | |
| |AUDIO ON |bit status 1| | | 16 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
EFF :
201-203, 34-48-00
Page 46
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |NOT USED | | | | 18 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 19 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 20 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 22 | | | | |
| |AWARENESS | | | | | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 23 | | | | |
| |AWARENESS | | | | | | | | |
| |CAUTION | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 24 | | | | |
| |AWARENESS | | | | | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |EXTERNAL |bit status 1| | | 25 | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |COMPUTER |bit status 1| | | 26 | | | | |
| |FAIL | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 27 | | | | |
| |AWARENESS | | | | | | | | |
| |NOT AVAIL.| | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 28 | | | | |
| |DISPLAY | | | | | | | | |
| |DSCRT 1 | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 29 | | | | |
| |DISPLAY | | | | | | | | |
| |DSCRT 2 | | | | | | | | |
| | | | | | | | | | |
EFF :
201-203, 34-48-00
Page 47
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 1.271.00 |ENH. GPWS |(1= warn. | | | |100 |DIS | | |
| |LOGIC DSCR|in progress)| | | | to | | | |
| | | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 12 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 13 | | | | |
| |CLEARANCE | | | | | | | | |
| |FLOOR ALER| | | | | | | | |
| | | | | | | | | | |
| |ENV.MOD IN|bit status 1| | | 14 | | | | |
| |PROGRESS | | | | | | | | |
| | | | | | | | | | |
| |ENV.MOD |bit status 1| | | 15 | | | | |
| |SNAPSHOT | | | | | | | | |
| |LATCH SET | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 16 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |TAKE OFF |bit status 1| | | 18 | | | | |
| |MODE | | | | | | | | |
| | | | | | | | | | |
| |MODE 1 |bit status 1| | | 19 | | | | |
| |SINKRATE | | | | | | | | |
| | | | | | | | | | |
| |MODE 1 |bit status 1| | | 20 | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |MODE 2 |bit status 1| | | 21 | | | | |
| |TERRAIN | | | | | | | | |
| | | | | | | | | | |
| |MODE 2 |bit status 1| | | 22 | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
EFF :
201-203, 34-48-00
Page 48
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |MODE 3 |bit status 1| | | 23 | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 4 |bit status 1| | | 24 | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 5 |bit status 1| | | 25 | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 7 |bit status 1| | | 26 | | | | |
| |VISUAL | | | | | | | | |
| |ALERT | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 27 | | | | |
| |AWARENESS | | | | | | | | |
| |CAUTION | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 28 | | | | |
| |AWARENESS | | | | | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.300.00 |ENH. GPWC | | | | | 50 |DIS | | |
| |ALERT DSCR| | | | | to | | | |
| |WORD3 | | | | |100 | | | |
| | | | | | | | | | |
| |MODES 1 TO| | | | 11 | | | | |
| |4 INOP | | | | | | | | |
| | | | | | | | | | |
| |MODE 5 | | | | 12 | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
EFF :
201-203, 34-48-00
Page 49
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |TERR CLEA.| | | | 16 | | | | |
| |FLOOR INOP| | | | | | | | |
| | | | | | | | | | |
| |TERR AWAR.| | | | 17 | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |ENV. MODU.| | | | 18 | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |SPARE | | | | 19 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 20 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 21 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 22 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 23 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 24 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 25 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 26 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 27 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 28 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 29 | | | | |
| | | | | | | | | | |
| 1.275.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
EFF :
201-203, 34-48-00
Page 50
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |CFDS |bit status 1| | | 12 | | | | |
| |ENABLE | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 13 | | | | |
| |SELECT 6 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 14 | | | | |
| |SELECT 1 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 15 | | | | |
| |SELECT 2 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 16 | | | | |
| |SELECT 3 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 18 | | | | |
| | | | | | | | | | |
| |AUDIO |bit status 0| | | 19 | | | | |
| |DECLUTTER | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 20 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 22 | | | | |
| |SELECT 7 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 24 | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 25 | | | | |
| |SELECT 5 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
EFF :
201-203, 34-48-00
Page 51
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |AIRCRAFT | | | | 27 | | | | |
| |SELECT 4 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 28 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.276.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 2 | | | | |200 | | | |
| | | | | | | | | | |
| |VOICE | | | | 11 | | | | |
| |SELECT 1 | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | | 12 | | | | |
| |SELECT 2 | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | | 13 | | | | |
| |SELECT 3 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |AUDIO |bit status 1| | | 15 | | | | |
| |SUPPRESS | | | | | | | | |
| | | | | | | | | | |
| |ATERNATE |bit status 1| | | 16 | | | | |
| |MODE 4 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |FMGC |bit status 1| | | 18 | | | | |
| |SELECT | | | | | | | | |
| | | | | | | | | | |
| |ALTERN. |bit status 1| | | 19 | | | | |
| |G/S CANCEL| | | | | | | | |
| | | | | | | | | | |
| |LAMP |bit status 1| | | 20 | | | | |
| |FORMAT | | | | | | | | |
EFF :
201-203, 34-48-00
Page 52
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |QFE/QNH |bit status 1| | | 21 | | | | |
| |SELECT |=QFE SELECT | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 22 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |G/S |bit status 1| | | 24 | | | | |
| |INHIBIT | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 25 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 27 | | | | |
| |SELECT 8 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 28 | | | | |
| |SELECT 9 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.277.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 3 | | | | |200 | | | |
| | | | | | | | | | |
| |ALTER.VOL.|bit status 1| | | 11 | | | | |
| |SELECTED | | | | | | | | |
| | | | | | | | | | |
| |SPARE | | | | 12 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
| | | | | | | | | | |
EFF :
201-203, 34-48-00
Page 53
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |NOT USED | | | | 16 | | | | |
| | | | | | | | | | |
| |TCF |bit status 1| | | 17 | | | | |
| |DISABLE | | | | | | | | |
| | | | | | | | | | |
| |TAD |bit status 1| | | 18 | | | | |
| |DISABLE | | | | | | | | |
| | | | | | | | | | |
| |SPARE | | | | 19 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 20 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 22 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 24 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 25 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 26 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 27 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 28 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.350.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 11 | | | | |
| |IR1 INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
EFF :
201-203, 34-48-00
Page 54
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |ARINC 429 | | | | 12 | | | | |
| |FMGC1 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 13 | | | | |
| |ADR1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 14 | | | | |
| |FCU BUS 1 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 16 | | | | |
| |ILS1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 17 | | | | |
| |FMGC1(Nav | | | | | | | | |
| |Modes) IN.| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 18 | | | | |
| |RA1 INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 19 | | | | |
| |FCU BUS 2 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 20 | | | | |
| |CFDIU | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
EFF :
201-203, 34-48-00
Page 55
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |ARINC 429 | | | | 21 | | | | |
| |WXR HZD | | | | | | | | |
| |BUS1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 22 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 24 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 25 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
| |PROGRAM | | | | 27 | | | | |
| |PIN FAULT | | | | | | | | |
| | | | | | | | | | |
| |FLAP | | | | 28 | | | | |
| |INPUT FAI.| | | | | | | | |
| | | | | | | | | | |
| |GEAR | | | | 29 | | | | |
| |INPUT FAI.| | | | | | | | |
| | | | | | | | | | |
| 1.351.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 2 | | | | |200 | | | |
| | | | | | | | | | |
| |G/S CANCEL| | | | 11 | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |MOMENTARY | | | | 12 | | | | |
| |AUDIO SUPP| | | | | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |AUDIO | | | | 13 | | | | |
| |INHIBIT | | | | | | | | |
EFF :
201-203, 34-48-00
Page 56
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |SELF-TEST | | | | 14 | | | | |
| |DSCR INPUT| | | | | | | | |
| |FAILED | | | | | | | | |
| | | | | | | | | | |
| |SUPPORT | | | | 15 | | | | |
| |TASK FAULT| | | | | | | | |
| | | | | | | | | | |
| |NVM FAULT | | | | 16 | | | | |
| | | | | | | | | | |
| |WATCHDOG | | | | 17 | | | | |
| |TIMER FAUL| | | | | | | | |
| | | | | | | | | | |
| |A/D FAIL | | | | 18 | | | | |
| | | | | | | | | | |
| |VOICE FAIL| | | | 19 | | | | |
| | | | | | | | | | |
| |DITS | | | | 20 | | | | |
| |OUTPUT FAI| | | | | | | | |
| | | | | | | | | | |
| |TERRAIN | | | | 21 | | | | |
| |DATABASE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |FLASH FILE| | | | 22 | | | | |
| |SYSTEM | | | | | | | | |
| |WRITE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |DITS INPUT| | | | 23 | | | | |
| |FAIL | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | | 24 | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |SYSTEM OR | | | | 25 | | | | |
| |MODE TASK | | | | | | | | |
EFF :
201-203, 34-48-00
Page 57
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |ENV. MOD. | | | | 26 | | | | |
| |DATABASE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |WATCHDOG | | | | 27 | | | | |
| |FAIL COUNT| | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 28 | | | | |
| |DATABASE | | | | | | | | |
| |FAULT OR| | | | | | | | |
| |CRC FAULT | | | | | | | | |
| | | | | | | | | | |
| |IMAGE DSP | | | | 29 | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| 1.355.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 3 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 12 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 18 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 19 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 20 | | | | |
EFF :
201-203, 34-48-00
Page 58
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |SPARE | | | | 21 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 22 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 23 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 24 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 25 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 26 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 27 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 28 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 29 | | | | |
| | | | | | | | | | |
| 1.357.00 |INPUT | | | | |100 |DIS | | |
| |DSCRT STAT| | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
| |G/S |(1= | | | 12 | | | | |
| |INHIBIT |inhibit) | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |GPWS MODES|(1= | | | 15 | | | | |
| |1 TO 5 |inhibit) | | | | | | | |
| |INHIBIT | | | | | | | | |
| |(AUDIO AND| | | | | | | | |
| |VISUAL) | | | | | | | | |
| | | | | | | | | | |
EFF :
201-203, 34-48-00
Page 59
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |NOT USED | | | | 16 | | | | |
| | | | | | | | | | |
| |MOMENTARY |(1= | | | 17 | | | | |
| |AUDIO SUPP|suppress) | | | | | | | |
| | | | | | | | | | |
| |SELF-TEST | | | | 18 | | | | |
| | | | | | | | | | |
| |LANDING |(1= down) | | | 19 | | | | |
| |GEAR | | | | | | | | |
| | | | | | | | | | |
| |LANDING |(1= | | | 20 | | | | |
| |FLAPS |extended) | | | | | | | |
| | | | | | | | | | |
| |G/S CANCEL|(1= | | | 21 | | | | |
| | |cancelled) | | | | | | | |
| | | | | | | | | | |
| |WXR 1 |(1= ON) | | | 22 | | | | |
| |ON/OFF | | | | | | | | |
| | | | | | | | | | |
| |TAD AND |(1= | | | 23 | | | | |
| |TCF |inhibit) | | | | | | | |
| |INHIBIT | | | | | | | | |
| | | | | | | | | | |
| |TERR ON ND| | | | 25 | | | | |
| |CAPT INPUT| | | | | | | | |
| | | | | | | | | | |
| |TERR ON ND| | | | 26 | | | | |
| |F/O INPUT | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 27 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 28 | | | | |
| | | | | | | | | | |
| |ALL AUDIO |(1= | | | 29 | | | | |
| |INHIBIT |inhibit) | | | | | | | |
-------------------------------------------------------------------------------
R
EFF :
201-203, 34-48-00
Page 60
Config-2 May 01/08
TAI
R **ON A/C 211-212, 215-215, 218-229, 301-311, 401-404,
A. Digital Outputs
This table contains all the output parameters in digital form.
They are sorted as per the numerical order of their output label.
The following table gives:
- EQ.SYS.LAB.SDI: output label for which the parameter is available,
- PARAMETER DEFINITION: parameter name,
- WORD RANGE/OPER RANGE/RESOLUTION ACCURACY: measurement range. Maximum
value transmitted. When the digital value changes, the change step is
equal to the accuracy,
- UNIT: unit in which the digital value is transmitted,
- SIG BIT: indicates whether a sign bit is available,
- BITS: number of bits used by the parameter in the label,
- XMSN/INTV: output transmission interval. The refresh rate is given in
milliseconds,
- CODE:
BNR: binary data word
BCD: binary coded decimal data word
ISO: data word coded in ISO5 code
DIS: discrete data word
HEX: hexadecimal coded
HYB: mixed code
- ALPHA CODE: indicates the parameter mnemonic code,
- SOURCE ORIGIN: parameter source computer or system.
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 1.270.00 |ENH. GPWS |(1=voice on)| | | | 50 |DIS | | |
| |ALER DSCRT| | | | | to | | | |
| |WORD 1 | | | | |100 | | | |
| | | | | | | | | | |
| |SINKRATE- |bit status 1| | | 11 | | | | |
| |PAUSE- | | | | | | | | |
| |SINKRATE | | | | | | | | |
| | | | | | | | | | |
| |PULL UP |bit status 1| | | 12 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 13 | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 61
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |DONT SINK|bit status 1| | | 14 | | | | |
| |-PAUSE- | | | | | | | | |
| |DONT SINK| | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 15 | | | | |
| |GEAR | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 16 | | | | |
| |FLAPS | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 17 | | | | |
| |TERRAIN | | | | | | | | |
| | | | | | | | | | |
| |GLIDESLOPE|bit status 1| | | 18 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 19 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 20 | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 22 | | | | |
| |AHEAD PULL| | | | | | | | |
| |UP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 24 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 25 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 27 | | | | |
| |AHEAD | | | | | | | | |
| | | | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 62
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |SPARE | | | | 28 | | | | |
| | | | | | | | | | |
| |Reserved | | | | 29 | | | | |
| |for obsta.| | | | | | | | |
| |voice | | | | | | | | |
| 1.274.00 |ENH. GPWS |(1= on) | | | | 50 |DIS | | |
| |ALER DSCRT| | | | | to | | | |
| |WORD 2 | | | | |100 | | | |
| | | | | | | | | | |
| |G/S CANCEL|bit status 1| | | 11 | | | | |
| | | | | | | | | | |
| |GPWS ALERT|bit status 1| | | 12 | | | | |
| | | | | | | | | | |
| |GPWS |bit status 1| | | 13 | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |GPWS INOP |bit status 1| | | 14 | | | | |
| | | | | | | | | | |
| |WINDSHEAR |bit status 1| | | 15 | | | | |
| |WARNING | | | | | | | | |
| |(IF WR/PWS| | | | | | | | |
| |INSTALLED)| | | | | | | | |
| | | | | | | | | | |
| |AUDIO ON |bit status 1| | | 16 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 18 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 19 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 20 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 22 | | | | |
| |AWARENESS | | | | | | | | |
| |WARNING | | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 63
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 23 | | | | |
| |AWARENESS | | | | | | | | |
| |CAUTION | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 24 | | | | |
| |AWARENESS | | | | | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |EXTERNAL |bit status 1| | | 25 | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |COMPUTER |bit status 1| | | 26 | | | | |
| |FAIL | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 27 | | | | |
| |AWARENESS | | | | | | | | |
| |NOT AVAIL.| | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 28 | | | | |
| |DISPLAY | | | | | | | | |
| |DSCRT 1 | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 29 | | | | |
| |DISPLAY | | | | | | | | |
| |DSCRT 2 | | | | | | | | |
| | | | | | | | | | |
| 1.271.00 |ENH. GPWS |(1= warn. | | | |100 |DIS | | |
| |LOGIC DSCR|in progress)| | | | to | | | |
| | | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 12 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 13 | | | | |
| |CLEARANCE | | | | | | | | |
| |FLOOR ALER| | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 64
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |ENV.MOD IN|bit status 1| | | 14 | | | | |
| |PROGRESS | | | | | | | | |
| | | | | | | | | | |
| |ENV.MOD |bit status 1| | | 15 | | | | |
| |SNAPSHOT | | | | | | | | |
| |LATCH SET | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 16 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |TAKE OFF |bit status 1| | | 18 | | | | |
| |MODE | | | | | | | | |
| | | | | | | | | | |
| |MODE 1 |bit status 1| | | 19 | | | | |
| |SINKRATE | | | | | | | | |
| | | | | | | | | | |
| |MODE 1 |bit status 1| | | 20 | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |MODE 2 |bit status 1| | | 21 | | | | |
| |TERRAIN | | | | | | | | |
| | | | | | | | | | |
| |MODE 2 |bit status 1| | | 22 | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |MODE 3 |bit status 1| | | 23 | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 4 |bit status 1| | | 24 | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 5 |bit status 1| | | 25 | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 7 |bit status 1| | | 26 | | | | |
| |VISUAL | | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 65
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |ALERT | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 27 | | | | |
| |AWARENESS | | | | | | | | |
| |CAUTION | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 28 | | | | |
| |AWARENESS | | | | | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.300.00 |ENH. GPWC | | | | | 50 |DIS | | |
| |ALERT DSCR| | | | | to | | | |
| |WORD3 | | | | |100 | | | |
| | | | | | | | | | |
| |MODES 1 TO| | | | 11 | | | | |
| |4 INOP | | | | | | | | |
| | | | | | | | | | |
| |MODE 5 | | | | 12 | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
| | | | | | | | | | |
| |TERR CLEA.| | | | 16 | | | | |
| |FLOOR INOP| | | | | | | | |
| | | | | | | | | | |
| |TERR AWAR.| | | | 17 | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |ENV. MODU.| | | | 18 | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |SPARE | | | | 19 | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 66
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |SPARE | | | | 20 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 21 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 22 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 23 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 24 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 25 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 26 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 27 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 28 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 29 | | | | |
| | | | | | | | | | |
| 1.275.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
| |CFDS |bit status 1| | | 12 | | | | |
| |ENABLE | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 13 | | | | |
| |SELECT 6 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 14 | | | | |
| |SELECT 1 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 15 | | | | |
| |SELECT 2 | | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 67
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |AIRCRAFT | | | | 16 | | | | |
| |SELECT 3 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 18 | | | | |
| | | | | | | | | | |
| |AUDIO |bit status 0| | | 19 | | | | |
| |DECLUTTER | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 20 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 22 | | | | |
| |SELECT 7 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 24 | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 25 | | | | |
| |SELECT 5 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 27 | | | | |
| |SELECT 4 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 28 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.276.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 2 | | | | |200 | | | |
| | | | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 68
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |VOICE | | | | 11 | | | | |
| |SELECT 1 | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | | 12 | | | | |
| |SELECT 2 | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | | 13 | | | | |
| |SELECT 3 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |AUDIO |bit status 1| | | 15 | | | | |
| |SUPPRESS | | | | | | | | |
| | | | | | | | | | |
| |ATERNATE |bit status 1| | | 16 | | | | |
| |MODE 4 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |FMGC |bit status 1| | | 18 | | | | |
| |SELECT | | | | | | | | |
| | | | | | | | | | |
| |ALTERN. |bit status 1| | | 19 | | | | |
| |G/S CANCEL| | | | | | | | |
| | | | | | | | | | |
| |LAMP |bit status 1| | | 20 | | | | |
| |FORMAT | | | | | | | | |
| | | | | | | | | | |
| |QFE/QNH |bit status 1| | | 21 | | | | |
| |SELECT |=QFE SELECT | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 22 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |G/S |bit status 1| | | 24 | | | | |
| |INHIBIT | | | | | | | | |
| | | | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 69
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |NOT USED | | | | 25 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 27 | | | | |
| |SELECT 8 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 28 | | | | |
| |SELECT 9 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.277.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 3 | | | | |200 | | | |
| | | | | | | | | | |
| |ALTER.VOL.|bit status 1| | | 11 | | | | |
| |SELECTED | | | | | | | | |
| | | | | | | | | | |
| |SPARE | | | | 12 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 16 | | | | |
| | | | | | | | | | |
| |TCF |bit status 1| | | 17 | | | | |
| |DISABLE | | | | | | | | |
| | | | | | | | | | |
| |TAD |bit status 1| | | 18 | | | | |
| |DISABLE | | | | | | | | |
| | | | | | | | | | |
| |SPARE | | | | 19 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 20 | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 70
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 22 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 24 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 25 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 26 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 27 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 28 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.350.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 11 | | | | |
| |IR1 INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 12 | | | | |
| |FMGC1 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 13 | | | | |
| |ADR1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 14 | | | | |
| |FCU BUS 1 | | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 71
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 16 | | | | |
| |ILS1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 17 | | | | |
| |FMGC1(Nav | | | | | | | | |
| |Modes) IN.| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 18 | | | | |
| |RA1 INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 19 | | | | |
| |FCU BUS 2 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 20 | | | | |
| |CFDIU | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 21 | | | | |
| |WXR HZD | | | | | | | | |
| |BUS1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 22 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 24 | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 72
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |NOT USED | | | | 25 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
| |PROGRAM | | | | 27 | | | | |
| |PIN FAULT | | | | | | | | |
| | | | | | | | | | |
| |FLAP | | | | 28 | | | | |
| |INPUT FAI.| | | | | | | | |
| | | | | | | | | | |
| |GEAR | | | | 29 | | | | |
| |INPUT FAI.| | | | | | | | |
| | | | | | | | | | |
| 1.351.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 2 | | | | |200 | | | |
| | | | | | | | | | |
| |G/S CANCEL| | | | 11 | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |MOMENTARY | | | | 12 | | | | |
| |AUDIO SUPP| | | | | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |AUDIO | | | | 13 | | | | |
| |INHIBIT | | | | | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |SELF-TEST | | | | 14 | | | | |
| |DSCR INPUT| | | | | | | | |
| |FAILED | | | | | | | | |
| | | | | | | | | | |
| |SUPPORT | | | | 15 | | | | |
| |TASK FAULT| | | | | | | | |
| | | | | | | | | | |
| |NVM FAULT | | | | 16 | | | | |
| | | | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 73
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |WATCHDOG | | | | 17 | | | | |
| |TIMER FAUL| | | | | | | | |
| | | | | | | | | | |
| |A/D FAIL | | | | 18 | | | | |
| | | | | | | | | | |
| |VOICE FAIL| | | | 19 | | | | |
| | | | | | | | | | |
| |DITS | | | | 20 | | | | |
| |OUTPUT FAI| | | | | | | | |
| | | | | | | | | | |
| |TERRAIN | | | | 21 | | | | |
| |DATABASE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |FLASH FILE| | | | 22 | | | | |
| |SYSTEM | | | | | | | | |
| |WRITE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |DITS INPUT| | | | 23 | | | | |
| |FAIL | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | | 24 | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |SYSTEM OR | | | | 25 | | | | |
| |MODE TASK | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |ENV. MOD. | | | | 26 | | | | |
| |DATABASE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |WATCHDOG | | | | 27 | | | | |
| |FAIL COUNT| | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 28 | | | | |
| |DATABASE | | | | | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 74
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |FAULT OR| | | | | | | | |
| |CRC FAULT | | | | | | | | |
| | | | | | | | | | |
| |IMAGE DSP | | | | 29 | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| 1.355.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 3 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 12 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 16 | | | | |
| |WRX HZD | | | | | | | | |
| |BUS2 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 18 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 19 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 20 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 21 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 22 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 23 | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 75
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |SPARE | | | | 24 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 25 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 26 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 27 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 28 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 29 | | | | |
| | | | | | | | | | |
| 1.357.00 |INPUT | | | | |100 |DIS | | |
| |DSCRT STAT| | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
| |G/S |(1= | | | 12 | | | | |
| |INHIBIT |inhibit) | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |GPWS MODES|(1= | | | 15 | | | | |
| |1 TO 5 |inhibit) | | | | | | | |
| |INHIBIT | | | | | | | | |
| |(AUDIO AND| | | | | | | | |
| |VISUAL) | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 16 | | | | |
| | | | | | | | | | |
| |MOMENTARY |(1= | | | 17 | | | | |
| |AUDIO SUPP|suppress) | | | | | | | |
| | | | | | | | | | |
| |SELF-TEST | | | | 18 | | | | |
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 76
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |LANDING |(1= down) | | | 19 | | | | |
| |GEAR | | | | | | | | |
| | | | | | | | | | |
| |LANDING |(1= | | | 20 | | | | |
| |FLAPS |extended) | | | | | | | |
| | | | | | | | | | |
| |G/S CANCEL|(1= | | | 21 | | | | |
| | |cancelled) | | | | | | | |
| | | | | | | | | | |
| |WXR 1 |(1= ON) | | | 22 | | | | |
| |ON/OFF | | | | | | | | |
| | | | | | | | | | |
| |TAD AND |(1= | | | 23 | | | | |
| |TCF |inhibit) | | | | | | | |
| |INHIBIT | | | | | | | | |
| | | | | | | | | | |
| |WXR 2 |(1= ON) | | | 24 | | | | |
| |ON/OFF | | | | | | | | |
| | | | | | | | | | |
| |TERR ON ND| | | | 25 | | | | |
| |CAPT INPUT| | | | | | | | |
| | | | | | | | | | |
| |TERR ON ND| | | | 26 | | | | |
| |F/O INPUT | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 27 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 28 | | | | |
| | | | | | | | | | |
| |ALL AUDIO |(1= | | | 29 | | | | |
| |INHIBIT |inhibit) | | | | | | | |
-------------------------------------------------------------------------------
R
EFF :
401-404,
211-212, 215-215, 218-229, 301-311, 34-48-00
Page 77
Config-2 Nov 01/08
TAI
**ON A/C 001-050, 053-099,
A. Digital Outputs
This table contains all the output parameters in digital form.
They are sorted as per the numerical order of their output label.
The following table gives:
- EQ.SYS.LAB.SDI: output label for which the parameter is available,
- PARAMETER DEFINITION: parameter name,
- WORD RANGE/OPER RANGE/RESOLUTION ACCURACY: measurement range. Maximum
value transmitted. When the digital value changes, the change step is
equal to the accuracy,
- UNIT: unit in which the digital value is transmitted,
- SIG BIT: indicates whether a sign bit is available,
- BITS: number of bits used by the parameter in the label,
- XMSN/INTV: output transmission interval. The refresh rate is given in
milliseconds,
- CODE:
BNR: binary data word
BCD: binary coded decimal data word
ISO: data word coded in ISO5 code
DIS: discrete data word
HEX: hexadecimal coded
HYB: mixed code
- ALPHA CODE: indicates the parameter mnemonic code,
- SOURCE ORIGIN: parameter source computer or system.
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 1.270.00 |ENH. GPWS |(1=voice on)| | | | 50 |DIS | | |
| |ALER DSCRT| | | | | to | | | |
| |WORD 1 | | | | |100 | | | |
| | | | | | | | | | |
| |SINKRATE- |bit status 1| | | 11 | | | | |
| |PAUSE- | | | | | | | | |
| |SINKRATE | | | | | | | | |
| | | | | | | | | | |
| |PULL UP |bit status 1| | | 12 | | | | |
| | | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 78
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |TERRAIN |bit status 1| | | 13 | | | | |
| | | | | | | | | | |
| |DONT SINK|bit status 1| | | 14 | | | | |
| |-PAUSE- | | | | | | | | |
| |DONT SINK| | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 15 | | | | |
| |GEAR | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 16 | | | | |
| |FLAPS | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | | 17 | | | | |
| |TERRAIN | | | | | | | | |
| | | | | | | | | | |
| |GLIDESLOPE|bit status 1| | | 18 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 19 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 20 | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 22 | | | | |
| |TERRAIN | | | | | | | | |
| |PULL-UP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 24 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 25 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
| |CAUTION |bit status 1| | | 27 | | | | |
| |TERRAIN | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 79
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |SPARE | | | | 28 | | | | |
| | | | | | | | | | |
| |Reserved | | | | 29 | | | | |
| |for obsta.| | | | | | | | |
| |voice | | | | | | | | |
| 1.274.00 |ENH. GPWS |(1= on) | | | | 50 |DIS | | |
| |ALER DSCRT| | | | | to | | | |
| |WORD 2 | | | | |100 | | | |
| | | | | | | | | | |
| |G/S CANCEL|bit status 1| | | 11 | | | | |
| | | | | | | | | | |
| |GPWS ALERT|bit status 1| | | 12 | | | | |
| | | | | | | | | | |
| |GPWS |bit status 1| | | 13 | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |G/S INOP |bit status 1| | | 14 | | | | |
| | | | | | | | | | |
| |WINDSHEAR |bit status 1| | | 15 | | | | |
| |WARNING | | | | | | | | |
| |(IF WR/PWS| | | | | | | | |
| |INSTALLED)| | | | | | | | |
| | | | | | | | | | |
| |AUDIO ON |bit status 1| | | 16 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 18 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 19 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 20 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 22 | | | | |
| |AWARENESS | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 80
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 23 | | | | |
| |AWARENESS | | | | | | | | |
| |CAUTION | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 24 | | | | |
| |AWARENESS | | | | | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |EXTERNAL |bit status 1| | | 25 | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |COMPUTER |bit status 1| | | 26 | | | | |
| |FAIL | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 27 | | | | |
| |AWARENESS | | | | | | | | |
| |NOT AVAIL.| | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 28 | | | | |
| |DISPLAY | | | | | | | | |
| |DSCRT 1 | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 29 | | | | |
| |DISPLAY | | | | | | | | |
| |DSCRT 2 | | | | | | | | |
| | | | | | | | | | |
| 1.271.00 |ENH. GPWS |(1= warn. | | | |100 |DIS | | |
| |LOGIC DSCR|in progress)| | | | to | | | |
| | | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 12 | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 13 | | | | |
| |CLEARANCE | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 81
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |FLOOR ALER| | | | | | | | |
| | | | | | | | | | |
| |ENV.MOD IN|bit status 1| | | 14 | | | | |
| |PROGRESS | | | | | | | | |
| | | | | | | | | | |
| |ENV.MOD |bit status 1| | | 15 | | | | |
| |SNAPSHOT | | | | | | | | |
| |LATCH SET | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 16 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |TAKE OFF |bit status 1| | | 18 | | | | |
| |MODE | | | | | | | | |
| | | | | | | | | | |
| |MODE 1 |bit status 1| | | 19 | | | | |
| |SINKRATE | | | | | | | | |
| | | | | | | | | | |
| |MODE 1 |bit status 1| | | 20 | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |MODE 2 |bit status 1| | | 21 | | | | |
| |TERRAIN | | | | | | | | |
| | | | | | | | | | |
| |MODE 2 |bit status 1| | | 22 | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |MODE 3 |bit status 1| | | 23 | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 4 |bit status 1| | | 24 | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 5 |bit status 1| | | 25 | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 7 |bit status 1| | | 26 | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 82
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |VISUAL | | | | | | | | |
| |ALERT | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 27 | | | | |
| |AWARENESS | | | | | | | | |
| |CAUTION | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | | 28 | | | | |
| |AWARENESS | | | | | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.300.00 |ENH. GPWC | | | | | 50 |DIS | | |
| |ALERT DSCR| | | | | to | | | |
| |WORD3 | | | | |100 | | | |
| | | | | | | | | | |
| |MODES 1 TO| | | | 11 | | | | |
| |4 INOP | | | | | | | | |
| | | | | | | | | | |
| |MODE 5 | | | | 12 | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
| | | | | | | | | | |
| |TERR CLEA.| | | | 16 | | | | |
| |FLOOR INOP| | | | | | | | |
| | | | | | | | | | |
| |TERR AWAR.| | | | 17 | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |ENV. MODU.| | | | 18 | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 83
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |SPARE | | | | 19 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 20 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 21 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 22 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 23 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 24 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 25 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 26 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 27 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 28 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 29 | | | | |
| | | | | | | | | | |
| 1.275.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
| |CFDS |bit status 1| | | 12 | | | | |
| |ENABLE | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 13 | | | | |
| |SELECT 6 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 14 | | | | |
| |SELECT 1 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 15 | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 84
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |SELECT 2 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 16 | | | | |
| |SELECT 3 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 18 | | | | |
| | | | | | | | | | |
| |AUDIO |bit status 0| | | 19 | | | | |
| |DECLUTTER | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 20 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 22 | | | | |
| |SELECT 7 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 24 | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 25 | | | | |
| |SELECT 5 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 27 | | | | |
| |SELECT 4 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 28 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.276.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 2 | | | | |200 | | | |
EFF :
001-050, 053-099, 34-48-00
Page 85
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |VOICE | | | | 11 | | | | |
| |SELECT 1 | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | | 12 | | | | |
| |SELECT 2 | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | | 13 | | | | |
| |SELECT 3 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |AUDIO |bit status 1| | | 15 | | | | |
| |SUPPRESS | | | | | | | | |
| | | | | | | | | | |
| |ATERNATE |bit status 1| | | 16 | | | | |
| |MODE 4 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |FMGC |bit status 1| | | 18 | | | | |
| |SELECT | | | | | | | | |
| | | | | | | | | | |
| |ALTERN. |bit status 1| | | 19 | | | | |
| |G/S CANCEL| | | | | | | | |
| | | | | | | | | | |
| |LAMP |bit status 1| | | 20 | | | | |
| |FORMAT | | | | | | | | |
| | | | | | | | | | |
| |QFE/QNH |bit status 1| | | 21 | | | | |
| |SELECT |=QFE SELECT | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 22 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |G/S |bit status 1| | | 24 | | | | |
| |INHIBIT | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 86
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |NOT USED | | | | 25 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 27 | | | | |
| |SELECT 8 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 28 | | | | |
| |SELECT 9 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.277.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 3 | | | | |200 | | | |
| | | | | | | | | | |
| |ALTER.VOL.|bit status 1| | | 11 | | | | |
| |SELECTED | | | | | | | | |
| | | | | | | | | | |
| |SPARE | | | | 12 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 16 | | | | |
| | | | | | | | | | |
| |TCF |bit status 1| | | 17 | | | | |
| |DISABLE | | | | | | | | |
| | | | | | | | | | |
| |TAD |bit status 1| | | 18 | | | | |
| |DISABLE | | | | | | | | |
| | | | | | | | | | |
| |SPARE | | | | 19 | | | | |
| | | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 87
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |SPARE | | | | 20 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 21 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 22 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 24 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 25 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 26 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 27 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 28 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 29 | | | | |
| | | | | | | | | | |
| 1.350.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 11 | | | | |
| |IR1 INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 12 | | | | |
| |FMGC1 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 13 | | | | |
| |ADR1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 14 | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 88
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |FCU BUS 1 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 16 | | | | |
| |ILS1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 17 | | | | |
| |FMGC1(Nav | | | | | | | | |
| |Modes) IN.| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 18 | | | | |
| |RA1 INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 19 | | | | |
| |FCU BUS 2 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 20 | | | | |
| |CFDIU | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 21 | | | | |
| |WXR HZD | | | | | | | | |
| |BUS1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 22 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 23 | | | | |
| | | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 89
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |NOT USED | | | | 24 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 25 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 26 | | | | |
| | | | | | | | | | |
| |PROGRAM | | | | 27 | | | | |
| |PIN FAULT | | | | | | | | |
| | | | | | | | | | |
| |FLAP | | | | 28 | | | | |
| |INPUT FAI.| | | | | | | | |
| | | | | | | | | | |
| |GEAR | | | | 29 | | | | |
| |INPUT FAI.| | | | | | | | |
| | | | | | | | | | |
| 1.351.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 2 | | | | |200 | | | |
| | | | | | | | | | |
| |G/S CANCEL| | | | 11 | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |MOMENTARY | | | | 12 | | | | |
| |AUDIO SUPP| | | | | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |AUDIO | | | | 13 | | | | |
| |INHIBIT | | | | | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |SELF-TEST | | | | 14 | | | | |
| |DSCR INPUT| | | | | | | | |
| |FAILED | | | | | | | | |
| | | | | | | | | | |
| |SUPPORT | | | | 15 | | | | |
| |TASK FAULT| | | | | | | | |
| | | | | | | | | | |
| |NVM FAULT | | | | 16 | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 90
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |WATCHDOG | | | | 17 | | | | |
| |TIMER FAUL| | | | | | | | |
| | | | | | | | | | |
| |A/D FAIL | | | | 18 | | | | |
| | | | | | | | | | |
| |VOICE FAIL| | | | 19 | | | | |
| | | | | | | | | | |
| |DITS | | | | 20 | | | | |
| |OUTPUT FAI| | | | | | | | |
| | | | | | | | | | |
| |TERRAIN | | | | 21 | | | | |
| |DATABASE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |FLASH FILE| | | | 22 | | | | |
| |SYSTEM | | | | | | | | |
| |WRITE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |DITS INPUT| | | | 23 | | | | |
| |FAIL | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | | 24 | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |SYSTEM OR | | | | 25 | | | | |
| |MODE TASK | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |ENV. MOD. | | | | 26 | | | | |
| |DATABASE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |WATCHDOG | | | | 27 | | | | |
| |FAIL COUNT| | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | | 28 | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 91
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |DATABASE | | | | | | | | |
| |FAULT OR| | | | | | | | |
| |CRC FAULT | | | | | | | | |
| | | | | | | | | | |
| |IMAGE DSP | | | | 29 | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| 1.355.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 3 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 12 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 15 | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | | 16 | | | | |
| |WXR HZD | | | | | | | | |
| |BUS2 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 17 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 18 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 19 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 20 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 21 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 22 | | | | |
| | | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 92
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |SPARE | | | | 23 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 24 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 25 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 26 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 27 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 28 | | | | |
| | | | | | | | | | |
| |SPARE | | | | 29 | | | | |
| | | | | | | | | | |
| 1.357.00 |INPUT | | | | |100 |DIS | | |
| |DSCRT STAT| | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | | 11 | | | | |
| | | | | | | | | | |
| |G/S |(1= | | | 12 | | | | |
| |INHIBIT |inhibit) | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 13 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 14 | | | | |
| | | | | | | | | | |
| |GPWS MODES|(1= | | | 15 | | | | |
| |1 TO 5 |inhibit) | | | | | | | |
| |INHIBIT | | | | | | | | |
| |(AUDIO AND| | | | | | | | |
| |VISUAL) | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 16 | | | | |
| | | | | | | | | | |
| |MOMENTARY |(1= | | | 17 | | | | |
| |AUDIO SUPP|suppress) | | | | | | | |
| | | | | | | | | | |
EFF :
001-050, 053-099, 34-48-00
Page 93
Config-2 May 01/08
R
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |SELF-TEST | | | | 18 | | | | |
| | | | | | | | | | |
| |LANDING |(1= down) | | | 19 | | | | |
| |GEAR | | | | | | | | |
| | | | | | | | | | |
| |LANDING |(1= | | | 20 | | | | |
| |FLAPS |extended) | | | | | | | |
| | | | | | | | | | |
| |G/S CANCEL|(1= | | | 21 | | | | |
| | |cancelled) | | | | | | | |
| | | | | | | | | | |
| |WXR 1 |(1= ON) | | | 22 | | | | |
| |ON/OFF | | | | | | | | |
| | | | | | | | | | |
| |TAD AND |(1= | | | 23 | | | | |
| |TCF |inhibit) | | | | | | | |
| |INHIBIT | | | | | | | | |
| | | | | | | | | | |
| |WXR 2 |(1= ON) | | | 24 | | | | |
| |ON/OFF | | | | | | | | |
| | | | | | | | | | |
| |TERR ON ND| | | | 25 | | | | |
| |CAPT INPUT| | | | | | | | |
| | | | | | | | | | |
| |TERR ON ND| | | | 26 | | | | |
| |F/O INPUT | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 27 | | | | |
| | | | | | | | | | |
| |NOT USED | | | | 28 | | | | |
| | | | | | | | | | |
| |ALL AUDIO |(1= | | | 29 | | | | |
| |INHIBIT |inhibit) | | | | | | | |
-------------------------------------------------------------------------------
R
EFF :
001-050, 053-099, 34-48-00
Page 94
Config-2 May 01/08
TAI
R **ON A/C 001-050, 053-099,
A. Digital Outputs
This table contains all the output parameters in digital form.
They are sorted as per the numerical order of their output label.
The following table gives:
- EQ.SYS.LAB.SDI: output label for which the parameter is available,
- PARAMETER DEFINITION: parameter name,
- WORD RANGE/OPER RANGE/RESOLUTION ACCURACY: measurement range. Maximum
value transmitted. When the digital value changes, the change step is
equal to the accuracy,
- UNIT: unit in which the digital value is transmitted,
- SIG BIT: indicates whether a sign bit is available,
- BITS: number of bits used by the parameter in the label,
- XMSN/INTV: output transmission interval. The refresh rate is given in
milliseconds,
- CODE:
BNR: binary data word
BCD: binary coded decimal data word
ISO: data word coded in ISO5 code
DIS: discrete data word
HEX: hexadecimal coded
HYB: mixed code
- ALPHA CODE: indicates the parameter mnemonic code,
- SOURCE ORIGIN: parameter source computer or system.
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 1.270.00 |ENH. GPWS |(1=voice on)| | | | 50 |DIS | | |
| |ALER DSCRT| | | | | to | | | |
| |WORD 1 | | | | |100 | | | |
| | | | | | | | | | |
| |SINKRATE- |bit status 1| | 11 | | | | | |
| |PAUSE- | | | | | | | | |
| |SINKRATE | | | | | | | | |
| | | | | | | | | | |
| |PULL UP |bit status 1| | 12 | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page 95
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |TERRAIN |bit status 1| | 13 | | | | | |
| | | | | | | | | | |
| |DONT SINK|bit status 1| | 14 | | | | | |
| |-PAUSE- | | | | | | | | |
| |DONT SINK| | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | 15 | | | | | |
| |GEAR | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | 16 | | | | | |
| |FLAPS | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | 17 | | | | | |
| |TERRAIN | | | | | | | | |
| | | | | | | | | | |
| |GLIDESLOPE|bit status 1| | 18 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 19 | | | | | |
| | | | | | | | | | |
| |NOT USED |bit status 1| | 20 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 21 | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | 22 | | | | | |
| |TERRAIN or| | | | | | | | |
| |OBSTACLE | | | | | | | | |
| |OBSTACLE | | | | | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 24 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 25 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 26 | | | | | |
| | | | | | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page 96
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |CAUTION |bit status 1| | 27 | | | | | |
| |TERRAIN | | | | | | | | |
| | | | | | | | | | |
| |CAUTION |bit status 1| | 28 | | | | | |
| |OBSTACLE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 29 | | | | | |
| | | | | | | | | | |
| 1.274.00 |ENH. GPWS |(1= on) | | | | 50 |DIS | | |
| |ALER DSCRT| | | | | to | | | |
| |WORD 2 | | | | |100 | | | |
| | | | | | | | | | |
| |DOUTL 1 |bit status 1| | 11 | | | | | |
| |G/S CANCEL| | | | | | | | |
| | | | | | | | | | |
| |DOUTL 2 |bit status 1| | 12 | | | | | |
| |GPWS ALERT| | | | | | | | |
| | | | | | | | | | |
| |DOUTL 3 |bit status 1| | 13 | | | | | |
| |GPWS | | | | | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |GPWS INOP |bit status 1| | 14 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 15 | | | | | |
| | | | | | | | | | |
| |DOUTL 6 |bit status 1| | 16 | | | | | |
| |AUDIO ON | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 17 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 18 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 19 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 20 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 21 | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page 97
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |TERRAIN or|bit status 1| | 22 | | | | | |
| |OBSTACLE | | | | | | | | |
| |AWARENESS | | | | | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN or|bit status 1| | 23 | | | | | |
| |OBSTACLE | | | | | | | | |
| |AWARENESS | | | | | | | | |
| |CAUTION | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | 24 | | | | | |
| |AWARENESS | | | | | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |EXTERNAL |bit status 1| | 25 | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |COMPUTER |bit status 1| | 26 | | | | | |
| |FAIL | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 27 | | | | | |
| | | | | | | | | | |
| |DOUTL 8 |bit status 1| | 28 | | | | | |
| |TERRAIN | | | | | | | | |
| |DISPLAY | | | | | | | | |
| |DSCRT 1 | | | | | | | | |
| | | | | | | | | | |
| |DOUTL 9 |bit status 1| | 29 | | | | | |
| |TERRAIN | | | | | | | | |
| |DISPLAY | | | | | | | | |
| |DSCRT 2 | | | | | | | | |
| | | | | | | | | | |
| 1.271.00 |ENH. GPWS |(1= warn. | | | |100 |DIS | | |
| |LOGIC DSCR|in progress)| | | | to | | | |
| | | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | 11 | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page 98
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |NOT USED | | | 12 | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | 13 | | | | | |
| |CLEARANCE | | | | | | | | |
| |FLOOR ALER| | | | | | | | |
| | | | | | | | | | |
| |ENV.MOD IN|bit status 1| | 14 | | | | | |
| |PROGRESS | | | | | | | | |
| | | | | | | | | | |
| |ENV.MOD |bit status 1| | 15 | | | | | |
| |SNAPSHOT | | | | | | | | |
| |LATCH SET | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 16 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 17 | | | | | |
| | | | | | | | | | |
| |TAKE OFF |bit status 1| | 18 | | | | | |
| |MODE | | | | | | | | |
| | | | | | | | | | |
| |MODE 1 |bit status 1| | 19 | | | | | |
| |SINKRATE | | | | | | | | |
| | | | | | | | | | |
| |MODE 1 |bit status 1| | 20 | | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |MODE 2 |bit status 1| | 21 | | | | | |
| |TERRAIN | | | | | | | | |
| | | | | | | | | | |
| |MODE 2 |bit status 1| | 22 | | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |MODE 3 |bit status 1| | 23 | | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 4 |bit status 1| | 24 | | | | | |
| |VISUAL | | | | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page 99
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |MODE 5 |bit status 1| | 25 | | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |NOT USED |bit status 1| | 26 | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | 27 | | | | | |
| |AWARENESS | | | | | | | | |
| |CAUTION | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | 28 | | | | | |
| |AWARENESS | | | | | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 29 | | | | | |
| | | | | | | | | | |
| 1.300.00 |ENH. GPWC | | | | | 50 |DIS | | |
| |ALERT DSCR| | | | | to | | | |
| |WORD3 | | | | |100 | | | |
| | | | | | | | | | |
| |MODES 1 TO| | | 11 | | | | | |
| |4 INOP | | | | | | | | |
| | | | | | | | | | |
| |MODE 5 | | | 12 | | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 13 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 14 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 15 | | | | | |
| | | | | | | | | | |
| |TERR CLEA.| | | 16 | | | | | |
| |FLOOR INOP| | | | | | | | |
| | | | | | | | | | |
| |TERR AWAR.| | | 17 | | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A0
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |ENV. MODU.| | | 18 | | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 19 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 20 | | | | | |
| | | | | | | | | | |
| |TCAS | | | 21 | | | | | |
| |INHIBIT | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 22 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 24 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 25 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 26 | | | | | |
| | | | | | | | | | |
| |FLAP OVRD | | | 27 | | | | | |
| |LATCH | | | | | | | | |
| | | | | | | | | | |
| |OBST | | | 28 | | | | | |
| |AWARENESS | | | | | | | | |
| |CAUTION | | | | | | | | |
| | | | | | | | | | |
| |OBST | | | 29 | | | | | |
| |AWARENESS | | | | | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| 1.275.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | 11 | | | | | |
| | | | | | | | | | |
| |CFDS |bit status 1| | 12 | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A1
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |ENABLE | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 13 | | | | | |
| |SELECT 6 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 14 | | | | | |
| |SELECT 1 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 15 | | | | | |
| |SELECT 2 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 16 | | | | | |
| |SELECT 3 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 17 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 18 | | | | | |
| | | | | | | | | | |
| |AUDIO |bit status 0| | 19 | | | | | |
| |DECLUTTER | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 20 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 21 | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 22 | | | | | |
| |SELECT 7 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 24 | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 25 | | | | | |
| |SELECT 5 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 26 | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 27 | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A2
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |SELECT 4 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 28 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 29 | | | | | |
| | | | | | | | | | |
| 1.276.00 |PROGRAM |(1=Open | | | | 50 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 2 | | | | |100 | | | |
| | | | | | | | | | |
| |VOICE | | | 11 | | | | | |
| |SELECT 1 | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | 12 | | | | | |
| |SELECT 2 | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | 13 | | | | | |
| |SELECT 3 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 14 | | | | | |
| | | | | | | | | | |
| |AUDIO |bit status 1| | 15 | | | | | |
| |SUPPRESS | | | | | | | | |
| | | | | | | | | | |
| |ATERNATE |bit status 1| | 16 | | | | | |
| |MODE 4 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 17 | | | | | |
| | | | | | | | | | |
| |OPTIONAL |bit status 1| | 18 | | | | | |
| |INPUT | | | | | | | | |
| |SELECT | | | | | | | | |
| | | | | | | | | | |
| |ALTERN. |bit status 1| | 19 | | | | | |
| |G/S CANCEL| | | | | | | | |
| | | | | | | | | | |
| |LAMP |bit status 1| | 20 | | | | | |
| |FORMAT |= Lamp | | | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A3
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | Format 2 | | | | | | | |
| | | | | | | | | | |
| |QFE/QNH |bit status 1| | 21 | | | | | |
| |SELECT |=QFE SELECT | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 22 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |G/S | | | 24 | | | | | |
| |INHIBIT | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 25 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 26 | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 27 | | | | | |
| |SELECT 8 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 28 | | | | | |
| |SELECT 9 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 29 | | | | | |
| | | | | | | | | | |
| 1.277.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 3 | | | | |200 | | | |
| | | | | | | | | | |
| |ALTER.VOL.|bit status 1| | 11 | | | | | |
| |SELECTED | | | | | | | | |
| | | | | | | | | | |
| |CONF |bit status 1| | 12 | | | | | |
| |OPTION 1= | | | | | | | | |
| |GPS SELECT| | | | | | | | |
| | | | | | | | | | |
| |CONF |bit status 1| | 13 | | | | | |
| |OPTION 2= | | | | | | | | |
| |MAN DESEL | | | | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A4
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |SINGLE GPS|bit status 1| | 14 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 15 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 16 | | | | | |
| | | | | | | | | | |
| |TCF |bit status 1| | 17 | | | | | |
| |DISABLE | | | | | | | | |
| | | | | | | | | | |
| |TAD |bit status 1| | 18 | | | | | |
| |DISABLE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 19 | | | | | |
| | | | | | | | | | |
| |PWS OPTION|bit status 1| | 20 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 21 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 22 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |ALTERNATE |bit status 1| | 24 | | | | | |
| |GPS SPEED | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 25 | | | | | |
| | | | | | | | | | |
| |OBSTACLE | | | 26 | | | | | |
| |CONTROL | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 27 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 28 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 29 | | | | | |
| | | | | | | | | | |
| 1.350.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A5
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 11 | | | | | |
| |IR1 INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 12 | | | | | |
| |FMGC1 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 13 | | | | | |
| |ADR1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 14 | | | | | |
| |FCU BUS 1 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 15 | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 16 | | | | | |
| |ILS1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 17 | | | | | |
| |FMGC1(Nav | | | | | | | | |
| |Modes) IN.| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 18 | | | | | |
| |RA1 INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 19 | | | | | |
| |FCU BUS 2 | | | | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A6
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 20 | | | | | |
| |CFDIU | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 21 | | | | | |
| |WXR HZD | | | | | | | | |
| |BUS1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 22 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 24 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 25 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 26 | | | | | |
| | | | | | | | | | |
| |PROGRAM | | | 27 | | | | | |
| |PIN FAULT | | | | | | | | |
| | | | | | | | | | |
| |FLAP | | | 28 | | | | | |
| |INPUT FAI.| | | | | | | | |
| | | | | | | | | | |
| |GEAR | | | 29 | | | | | |
| |INPUT FAI.| | | | | | | | |
| | | | | | | | | | |
| 1.351.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 2 | | | | |200 | | | |
| | | | | | | | | | |
| |G/S CANCEL| | | 11 | | | | | |
| |DSCR. FAI.| | | | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A7
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |MOMENTARY | | | 12 | | | | | |
| |AUDIO SUPP| | | | | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |AUDIO | | | 13 | | | | | |
| |INHIBIT | | | | | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |SELF-TEST | | | 14 | | | | | |
| |DSCR INPUT| | | | | | | | |
| |FAILED | | | | | | | | |
| | | | | | | | | | |
| |SUPPORT | | | 15 | | | | | |
| |TASK FAULT| | | | | | | | |
| | | | | | | | | | |
| |NVM FAULT | | | 16 | | | | | |
| | | | | | | | | | |
| |WATCHDOG | | | 17 | | | | | |
| |TIMER FAUL| | | | | | | | |
| | | | | | | | | | |
| |A/D FAIL | | | 18 | | | | | |
| | | | | | | | | | |
| |VOICE FAIL| | | 19 | | | | | |
| | | | | | | | | | |
| |DITS | | | 20 | | | | | |
| |OUTPUT FAI| | | | | | | | |
| | | | | | | | | | |
| |TERRAIN | | | 21 | | | | | |
| |DATABASE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |FLASH FILE| | | 22 | | | | | |
| |SYSTEM | | | | | | | | |
| |WRITE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |DITS INPUT| | | 23 | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A8
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |FAIL | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | 24 | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |SYSTEM OR | | | 25 | | | | | |
| |MODE TASK | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |ENV. MOD. | | | 26 | | | | | |
| |DATABASE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |WATCHDOG | | | 27 | | | | | |
| |FAIL COUNT| | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 28 | | | | | |
| |DATABASE | | | | | | | | |
| |FAULT OR| | | | | | | | |
| |CRC FAULT | | | | | | | | |
| | | | | | | | | | |
| |IMAGE DSP | | | 29 | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| 1.355.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 3 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | 11 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 12 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 13 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 14 | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 15 | | | | | |
| |GPS BUS | | | | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A9
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 16 | | | | | |
| |WXR HZD | | | | | | | | |
| |BUS2 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 17 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 18 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 19 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 20 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 21 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 22 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 23 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 24 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 25 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 26 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 27 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 28 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 29 | | | | | |
| | | | | | | | | | |
| 1.357.00 |INPUT | | | | |100 |DIS | | |
| |DSCRT STAT| | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A10
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |NOT USED | | | 11 | | | | | |
| | | | | | | | | | |
| |G/S |(1= | | 12 | | | | | |
| |INHIBIT |inhibit) | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 13 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 14 | | | | | |
| | | | | | | | | | |
| |GPWS MODES|(1= | | 15 | | | | | |
| |1 TO 5 |inhibit) | | | | | | | |
| |INHIBIT | | | | | | | | |
| |(AUDIO AND| | | | | | | | |
| |VISUAL) | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 16 | | | | | |
| | | | | | | | | | |
| |MOMENTARY |(1= | | 17 | | | | | |
| |AUDIO SUPP|suppress) | | | | | | | |
| | | | | | | | | | |
| |SELF-TEST | | | 18 | | | | | |
| | | | | | | | | | |
| |LANDING |(1= down) | | 19 | | | | | |
| |GEAR | | | | | | | | |
| | | | | | | | | | |
| |LANDING |(1= | | 20 | | | | | |
| |FLAPS |extended) | | | | | | | |
| | | | | | | | | | |
| |G/S CANCEL|(1= | | 21 | | | | | |
| | |cancelled) | | | | | | | |
| | | | | | | | | | |
| |WXR 1 |(1= ON) | | 22 | | | | | |
| |ON/OFF | | | | | | | | |
| | | | | | | | | | |
| |TAD AND |(1= | | 23 | | | | | |
| |TCF |inhibit) | | | | | | | |
| |INHIBIT | | | | | | | | |
| | | | | | | | | | |
R
EFF :
001-050, 053-099, 34-48-00
Page A11
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |WXR 2 |(1= ON) | | 24 | | | | | |
| |ON/OFF | | | | | | | | |
| | | | | | | | | | |
| |TERR ON ND| | | 25 | | | | | |
| |CAPT INPUT| | | | | | | | |
| | | | | | | | | | |
| |TERR ON ND| | | 26 | | | | | |
| |F/O INPUT | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 27 | | | | | |
| | | | | | | | | | |
| |NOT USED |(1= | | 28 | | | | | |
| |(RAAS) |activated) | | | | | | | |
| | | | | | | | | | |
| |ALL AUDIO |(1= | | 29 | | | | | |
| |INHIBIT |inhibit) | | | | | | | |
-------------------------------------------------------------------------------
A. Digital Outputs
This table contains all the output parameters in digital form.
They are sorted as per the numerical order of their output label.
The following table gives:
- EQ.SYS.LAB.SDI: output label for which the parameter is available,
- PARAMETER DEFINITION: parameter name,
- WORD RANGE/OPER RANGE/RESOLUTION ACCURACY: measurement range. Maximum
value transmitted. When the digital value changes, the change step is
equal to the accuracy,
- UNIT: unit in which the digital value is transmitted,
- SIG BIT: indicates whether a sign bit is available,
- BITS: number of bits used by the parameter in the label,
- XMSN/INTV: output transmission interval. The refresh rate is given in
milliseconds,
- CODE:
BNR: binary data word
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-48-00
Page A12
Config-2 Feb 01/09
TAI
BCD: binary coded decimal data word
ISO: data word coded in ISO5 code
DIS: discrete data word
HEX: hexadecimal coded
HYB: mixed code
- ALPHA CODE: indicates the parameter mnemonic code,
- SOURCE ORIGIN: parameter source computer or system.
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 1.270.00 |ENH. GPWS |(1=voice on)| | | | 50 |DIS | | |
| |ALER DSCRT| | | | | to | | | |
| |WORD 1 | | | | |100 | | | |
| | | | | | | | | | |
| |SINKRATE- |bit status 1| | 11 | | | | | |
| |PAUSE- | | | | | | | | |
| |SINKRATE | | | | | | | | |
| | | | | | | | | | |
| |PULL UP |bit status 1| | 12 | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | 13 | | | | | |
| | | | | | | | | | |
| |DONT SINK|bit status 1| | 14 | | | | | |
| |-PAUSE- | | | | | | | | |
| |DONT SINK| | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | 15 | | | | | |
| |GEAR | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | 16 | | | | | |
| |FLAPS | | | | | | | | |
| | | | | | | | | | |
| |TOO LOW |bit status 1| | 17 | | | | | |
| |TERRAIN | | | | | | | | |
| | | | | | | | | | |
| |GLIDESLOPE|bit status 1| | 18 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 19 | | | | | |
| | | | | | | | | | |
| |NOT USED |bit status 1| | 20 | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A13
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |NOT USED | | | 21 | | | | | |
| | | | | | | | | | |
| |TERRAIN or|bit status 1| | 22 | | | | | |
| |OBSTACLE | | | | | | | | |
| |AHEAD PULL| | | | | | | | |
| |UP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 24 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 25 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 26 | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | 27 | | | | | |
| |AHEAD | | | | | | | | |
| | | | | | | | | | |
| |OBSTACLE |bit status 1| | 28 | | | | | |
| |AHEAD | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 29 | | | | | |
| | | | | | | | | | |
| 1.274.00 |ENH. GPWS |(1= on) | | | | 50 |DIS | | |
| |ALER DSCRT| | | | | to | | | |
| |WORD 2 | | | | |100 | | | |
| | | | | | | | | | |
| |DOUTL 1 |bit status 1| | 11 | | | | | |
| |G/S CANCEL| | | | | | | | |
| | | | | | | | | | |
| |DOUTL 2 |bit status 1| | 12 | | | | | |
| |GPWS ALERT| | | | | | | | |
| | | | | | | | | | |
| |DOUTL 3 |bit status 1| | 13 | | | | | |
| |GPWS | | | | | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A14
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |GPWS INOP |bit status 1| | 14 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 15 | | | | | |
| | | | | | | | | | |
| |DOUTL 6 |bit status 1| | 16 | | | | | |
| |AUDIO ON | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 17 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 18 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 19 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 20 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 21 | | | | | |
| | | | | | | | | | |
| |TERRAIN or|bit status 1| | 22 | | | | | |
| |OBSTACLE | | | | | | | | |
| |AWARENESS | | | | | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN or|bit status 1| | 23 | | | | | |
| |OBSTACLE | | | | | | | | |
| |AWARENESS | | | | | | | | |
| |CAUTION | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | 24 | | | | | |
| |AWARENESS | | | | | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |EXTERNAL |bit status 1| | 25 | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |COMPUTER |bit status 1| | 26 | | | | | |
| |FAIL | | | | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | 27 | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A15
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |AWARENESS | | | | | | | | |
| |NOT AVAIL.| | | | | | | | |
| | | | | | | | | | |
| |DOUTL 8 |bit status 1| | 28 | | | | | |
| |TERRAIN | | | | | | | | |
| |DISPLAY | | | | | | | | |
| |DSCRT 1 | | | | | | | | |
| | | | | | | | | | |
| |DOUTL 9 |bit status 1| | 29 | | | | | |
| |TERRAIN | | | | | | | | |
| |DISPLAY | | | | | | | | |
| |DSCRT 2 | | | | | | | | |
| | | | | | | | | | |
| 1.271.00 |ENH. GPWS |(1= warn. | | | |100 |DIS | | |
| |LOGIC DSCR|in progress)| | | | to | | | |
| | | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | 11 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 12 | | | | | |
| | | | | | | | | | |
| |TERRAIN |bit status 1| | 13 | | | | | |
| |CLEARANCE | | | | | | | | |
| |FLOOR ALER| | | | | | | | |
| | | | | | | | | | |
| |ENV.MOD IN|bit status 1| | 14 | | | | | |
| |PROGRESS | | | | | | | | |
| | | | | | | | | | |
| |ENV.MOD |bit status 1| | 15 | | | | | |
| |SNAPSHOT | | | | | | | | |
| |LATCH SET | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 16 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 17 | | | | | |
| | | | | | | | | | |
| |TAKE OFF |bit status 1| | 18 | | | | | |
| |MODE | | | | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A16
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |MODE 1 |bit status 1| | 19 | | | | | |
| |SINKRATE | | | | | | | | |
| | | | | | | | | | |
| |MODE 1 |bit status 1| | 20 | | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |MODE 2 |bit status 1| | 21 | | | | | |
| |TERRAIN | | | | | | | | |
| | | | | | | | | | |
| |MODE 2 |bit status 1| | 22 | | | | | |
| |PULL UP | | | | | | | | |
| | | | | | | | | | |
| |MODE 3 |bit status 1| | 23 | | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 4 |bit status 1| | 24 | | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |MODE 5 |bit status 1| | 25 | | | | | |
| |VISUAL | | | | | | | | |
| | | | | | | | | | |
| |NOT USED |bit status 1| | 26 | | | | | |
| | | | | | | | | | |
| |NOTE USED | | | 27 | | | | | |
| | | | | | | | | | |
| |NOTE USED | | | 28 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 29 | | | | | |
| | | | | | | | | | |
| 1.300.00 |ENH. GPWC | | | | | 50 |DIS | | |
| |ALERT DSCR| | | | | to | | | |
| |WORD3 | | | | |100 | | | |
| | | | | | | | | | |
| |MODES 1 TO| | | 11 | | | | | |
| |4 INOP | | | | | | | | |
| | | | | | | | | | |
| |MODE 5 | | | 12 | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A17
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 13 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 14 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 15 | | | | | |
| | | | | | | | | | |
| |TERR CLEA.| | | 16 | | | | | |
| |FLOOR INOP| | | | | | | | |
| | | | | | | | | | |
| |TERR AWAR.| | | 17 | | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |ENV. MODU.| | | 18 | | | | | |
| |INOP | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 19 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 20 | | | | | |
| | | | | | | | | | |
| |TCAS | | | 21 | | | | | |
| |INHIBIT | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 22 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 24 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 25 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 26 | | | | | |
| | | | | | | | | | |
| |FLAP OVRD | | | 27 | | | | | |
| |LATCH | | | | | | | | |
| | | | | | | | | | |
| |OBST | | | 28 | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A18
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |AWARENESS | | | | | | | | |
| |CAUTION | | | | | | | | |
| | | | | | | | | | |
| |OBST | | | 29 | | | | | |
| |AWARENESS | | | | | | | | |
| |WARNING | | | | | | | | |
| | | | | | | | | | |
| 1.275.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | 11 | | | | | |
| | | | | | | | | | |
| |CFDS |bit status 1| | 12 | | | | | |
| |ENABLE | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 13 | | | | | |
| |SELECT 6 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 14 | | | | | |
| |SELECT 1 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 15 | | | | | |
| |SELECT 2 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 16 | | | | | |
| |SELECT 3 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 17 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 18 | | | | | |
| | | | | | | | | | |
| |AUDIO |bit status 0| | 19 | | | | | |
| |DECLUTTER | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 20 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 21 | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A19
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |AIRCRAFT | | | 22 | | | | | |
| |SELECT 7 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 24 | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 25 | | | | | |
| |SELECT 5 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 26 | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 27 | | | | | |
| |SELECT 4 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 28 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 29 | | | | | |
| | | | | | | | | | |
| 1.276.00 |PROGRAM |(1=Open | | | | 50 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 2 | | | | |100 | | | |
| | | | | | | | | | |
| |VOICE | | | 11 | | | | | |
| |SELECT 1 | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | 12 | | | | | |
| |SELECT 2 | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | 13 | | | | | |
| |SELECT 3 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 14 | | | | | |
| | | | | | | | | | |
| |AUDIO |bit status 1| | 15 | | | | | |
| |SUPPRESS | | | | | | | | |
| | | | | | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A20
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |ATERNATE |bit status 1| | 16 | | | | | |
| |MODE 4 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 17 | | | | | |
| | | | | | | | | | |
| |OPTIONAL |bit status 1| | 18 | | | | | |
| |INPUT | | | | | | | | |
| |SELECT | | | | | | | | |
| | | | | | | | | | |
| |ALTERN. |bit status 1| | 19 | | | | | |
| |G/S CANCEL| | | | | | | | |
| | | | | | | | | | |
| |LAMP |bit status 1| | 20 | | | | | |
| |FORMAT |= Lamp | | | | | | | |
| | | Format 2 | | | | | | | |
| | | | | | | | | | |
| |QFE/QNH |bit status 1| | 21 | | | | | |
| |SELECT |=QFE SELECT | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 22 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |G/S | | | 24 | | | | | |
| |INHIBIT | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 25 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 26 | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 27 | | | | | |
| |SELECT 8 | | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 28 | | | | | |
| |SELECT 9 | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 29 | | | | | |
| | | | | | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A21
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 1.277.00 |PROGRAM |(1=Open | | | |100 |DIS | | |
| |PIN STATUS|0=Ground) | | | | to | | | |
| |WORD 3 | | | | |200 | | | |
| | | | | | | | | | |
| |ALTER.VOL.|bit status 1| | 11 | | | | | |
| |SELECTED | | | | | | | | |
| | | | | | | | | | |
| |CONF |bit status 1| | 12 | | | | | |
| |OPTION 1= | | | | | | | | |
| |GPS SELECT| | | | | | | | |
| | | | | | | | | | |
| |CONF |bit status 1| | 13 | | | | | |
| |OPTION 2= | | | | | | | | |
| |MAN DESEL | | | | | | | | |
| | | | | | | | | | |
| |SINGLE GPS|bit status 1| | 14 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 15 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 16 | | | | | |
| | | | | | | | | | |
| |TCF |bit status 1| | 17 | | | | | |
| |DISABLE | | | | | | | | |
| | | | | | | | | | |
| |TAD |bit status 1| | 18 | | | | | |
| |DISABLE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 19 | | | | | |
| | | | | | | | | | |
| |PWS OPTION|bit status 1| | 20 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 21 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 22 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |ALTERNATE |bit status 1| | 24 | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A22
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |GPS SPEED | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 25 | | | | | |
| | | | | | | | | | |
| |OBSTACLE | | | 26 | | | | | |
| |CONTROL | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 27 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 28 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 29 | | | | | |
| | | | | | | | | | |
| 1.350.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 11 | | | | | |
| |IR1 INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 12 | | | | | |
| |FMGC1 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 13 | | | | | |
| |ADR1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 14 | | | | | |
| |FCU BUS 1 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 15 | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 16 | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A23
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |ILS1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 17 | | | | | |
| |FMGC1(Nav | | | | | | | | |
| |Modes) IN.| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 18 | | | | | |
| |RA1 INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 19 | | | | | |
| |FCU BUS 2 | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 20 | | | | | |
| |CFDIU | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 21 | | | | | |
| |WXR HZD | | | | | | | | |
| |BUS1 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 22 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 23 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 24 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 25 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 26 | | | | | |
| | | | | | | | | | |
| |PROGRAM | | | 27 | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A24
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |PIN FAULT | | | | | | | | |
| | | | | | | | | | |
| |FLAP | | | 28 | | | | | |
| |INPUT FAI.| | | | | | | | |
| | | | | | | | | | |
| |GEAR | | | 29 | | | | | |
| |INPUT FAI.| | | | | | | | |
| | | | | | | | | | |
| 1.351.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 2 | | | | |200 | | | |
| | | | | | | | | | |
| |G/S CANCEL| | | 11 | | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |MOMENTARY | | | 12 | | | | | |
| |AUDIO SUPP| | | | | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |AUDIO | | | 13 | | | | | |
| |INHIBIT | | | | | | | | |
| |DSCR. FAI.| | | | | | | | |
| | | | | | | | | | |
| |SELF-TEST | | | 14 | | | | | |
| |DSCR INPUT| | | | | | | | |
| |FAILED | | | | | | | | |
| | | | | | | | | | |
| |SUPPORT | | | 15 | | | | | |
| |TASK FAULT| | | | | | | | |
| | | | | | | | | | |
| |NVM FAULT | | | 16 | | | | | |
| | | | | | | | | | |
| |WATCHDOG | | | 17 | | | | | |
| |TIMER FAUL| | | | | | | | |
| | | | | | | | | | |
| |A/D FAIL | | | 18 | | | | | |
| | | | | | | | | | |
| |VOICE FAIL| | | 19 | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A25
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |DITS | | | 20 | | | | | |
| |OUTPUT FAI| | | | | | | | |
| | | | | | | | | | |
| |TERRAIN | | | 21 | | | | | |
| |DATABASE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |FLASH FILE| | | 22 | | | | | |
| |SYSTEM | | | | | | | | |
| |WRITE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |DITS INPUT| | | 23 | | | | | |
| |FAIL | | | | | | | | |
| | | | | | | | | | |
| |VOICE | | | 24 | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |SYSTEM OR | | | 25 | | | | | |
| |MODE TASK | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |ENV. MOD. | | | 26 | | | | | |
| |DATABASE | | | | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
| |WATCHDOG | | | 27 | | | | | |
| |FAIL COUNT| | | | | | | | |
| | | | | | | | | | |
| |AIRCRAFT | | | 28 | | | | | |
| |DATABASE | | | | | | | | |
| |FAULT OR| | | | | | | | |
| |CRC FAULT | | | | | | | | |
| | | | | | | | | | |
| |IMAGE DSP | | | 29 | | | | | |
| |FAULT | | | | | | | | |
| | | | | | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A26
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| 1.355.00 |FAULT |(1=Failed)| | | |100 |DIS | | |
| |DIAGNOSTIC| | | | | to | | | |
| |WORD 3 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | 11 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 12 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 13 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 14 | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 15 | | | | | |
| |GPS BUS | | | | | | | | |
| |INPUT | | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |ARINC 429 | | | 16 | | | | | |
| |WXR HZD | | | | | | | | |
| |BUS2 INPUT| | | | | | | | |
| |INACTIVE | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 17 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 18 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 19 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 20 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 21 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 22 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 23 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 24 | | | | | |
| | | | | | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A27
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| |SPARE | | | 25 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 26 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 27 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 28 | | | | | |
| | | | | | | | | | |
| |SPARE | | | 29 | | | | | |
| | | | | | | | | | |
| 1.357.00 |INPUT | | | | |100 |DIS | | |
| |DSCRT STAT| | | | | to | | | |
| |WORD 1 | | | | |200 | | | |
| | | | | | | | | | |
| |NOT USED | | | 11 | | | | | |
| | | | | | | | | | |
| |G/S |(1= | | 12 | | | | | |
| |INHIBIT |inhibit) | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 13 | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 14 | | | | | |
| | | | | | | | | | |
| |GPWS MODES|(1= | | 15 | | | | | |
| |1 TO 5 |inhibit) | | | | | | | |
| |INHIBIT | | | | | | | | |
| |(AUDIO AND| | | | | | | | |
| |VISUAL) | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 16 | | | | | |
| | | | | | | | | | |
| |MOMENTARY |(1= | | 17 | | | | | |
| |AUDIO SUPP|suppress) | | | | | | | |
| | | | | | | | | | |
| |SELF-TEST | | | 18 | | | | | |
| | | | | | | | | | |
| |LANDING |(1= down) | | 19 | | | | | |
| |GEAR | | | | | | | | |
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page A28
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) |
-------------------------------------------------------------------------------
|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE |
| |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN |
| |(*=REMARK)| RESOLUTION | | | | | | |BUS No.|
| |(X=NOTE) | ACCURACY | | | | | | |ATA REF|
| | | | | | | | | |CONV |
-------------------------------------------------------------------------------
| | | | | | | | | | |
| |LANDING |(1= | | 20 | | | | | |
| |FLAPS |extended) | | | | | | | |
| | | | | | | | | | |
| |G/S CANCEL|(1= | | 21 | | | | | |
| | |cancelled) | | | | | | | |
| | | | | | | | | | |
| |WXR 1 |(1= ON) | | 22 | | | | | |
| |ON/OFF | | | | | | | | |
| | | | | | | | | | |
| |TAD AND |(1= | | 23 | | | | | |
| |TCF |inhibit) | | | | | | | |
| |INHIBIT | | | | | | | | |
| | | | | | | | | | |
| |WXR 2 |(1= ON) | | 24 | | | | | |
| |ON/OFF | | | | | | | | |
| | | | | | | | | | |
| |TERR ON ND| | | 25 | | | | | |
| |CAPT INPUT| | | | | | | | |
| | | | | | | | | | |
| |TERR ON ND| | | 26 | | | | | |
| |F/O INPUT | | | | | | | | |
| | | | | | | | | | |
| |NOT USED | | | 27 | | | | | |
| | | | | | | | | | |
| |NOT USED |(1= | | 28 | | | | | |
| |(RAAS) |activated) | | | | | | | |
| | | | | | | | | | |
| |ALL AUDIO |(1= | | 29 | | | | | |
| |INHIBIT |inhibit) | | | | | | | |
-------------------------------------------------------------------------------
6. _____________________
Component Description
R
EFF :
ALL 34-48-00
Page A29
Config-2 May 01/08
TAI
**ON A/C 201-203,
A. Enhanced GPWC
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| MIDDLE | 6A| 429 INPUT 1(A) ADIRU1 BUS IR (A) |
| MIDDLE | 6B| 429 INPUT 1(B) ADIRU1 BUS IR (B) |
| TOP | 9A| 429 INPUT 10(A) CFDIU (A) |
| TOP | 9B| 429 INPUT 10(B) CFDIU (B) |
| TOP | 8A| 429 INPUT 11(A) WXR1 HZD BUS (A) |
| TOP | 8B| 429 INPUT 11(B) WXR1 HZD BUS (B) |
| TOP | 8C| 429 INPUT 12(A) N/U |
| TOP | 8D| 429 INPUT 12(B) N/U |
| TOP | 5A| 429 INPUT 13(A) N/U |
| TOP | 6A| 429 INPUT 13(B) N/U |
| TOP | 1C| 429 INPUT 14(A) N/U |
R
EFF :
201-203, 34-48-00
Page A30
Config-2 May 01/08
TAI
Enhanced GPWC
Figure 008
R
EFF :
ALL 34-48-00
Page A31
Config-2 May 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| TOP | 1D| 429 INPUT 14(B) N/U |
| TOP | 4A| 429 INPUT 15(A) N/U |
| TOP | 4B| 429 INPUT 15(B) N/U |
| MIDDLE |10C| 429 INPUT 2(A) FMGC1 (A) |
| MIDDLE |10D| 429 INPUT 2(B) FMGC1 (B) |
| MIDDLE |11A| 429 INPUT 3(A) ADIRU 1 BUS ADR (A) |
| MIDDLE |11B| 429 INPUT 3(B) ADIRU 1 BUS ADR (B) |
| MIDDLE |12A| 429 INPUT 4(A) FCU 1 (A) |
| MIDDLE |12B| 429 INPUT 4(B) FCU 1 (B) |
| MIDDLE |10A| 429 INPUT 5(A) N/U |
| MIDDLE |10B| 429 INPUT 5(B) N/U |
| MIDDLE |11C| 429 INPUT 6(A) ILS 1 (A) |
| MIDDLE |11D| 429 INPUT 6(B) ILS 1 (B) |
| MIDDLE |12C| 429 INPUT 7(A) FMGC 1 DISCWORD (A) |
| MIDDLE |12D| 429 INPUT 7(B) FMGC 1 DISCWORD (B) |
| MIDDLE |13A| 429 INPUT 8(A) RA 1 (A) |
| MIDDLE |13B| 429 INPUT 8(B) RA 1 (B) |
| TOP | 9C| 429 INPUT 9(A) FCU 2 (A) |
| TOP | 9D| 429 INPUT 9(B) FCU 2 (B) |
| MIDDLE | 1C| 429 OUTPUT 1(A) CFDIU (A) |
| MIDDLE | 1D| 429 OUTPUT 1(B) CFDIU (B) |
| TOP | 2A| 429 OUTPUT 2(A) N/U |
| TOP | 2B| 429 OUTPUT 2(B) N/U |
| TOP | 5C| 429 INPUT 16(A) N/U |
| TOP | 5D| 429 INPUT 16(B) N/U |
| TOP |11C| 429 INPUT 17(A) N/U |
| TOP |11D| 429 INPUT 17(B) N/U |
| TOP | 3A| 453 OUTPUT 1(A) TERR DATA R1 (A) |
| TOP | 3B| 453 OUTPUT 1(B) TERR DATA R1 (B) |
| TOP | 3C| 453 OUTPUT 2(A) TERR DATA R2 (A) |
| TOP | 3D| 453 OUTPUT 2(B) TERR DATA R2 (B) |
| TOP |13A| DC ANALOG INPUT 1 (+) N/U |
| TOP |13B| DC ANALOG INPUT 1 (-) N/U |
| TOP |14A| DC ANALOG INPUT 2 (+) N/U |
| TOP |14B| DC ANALOG INPUT 2 (-) N/U |
| TOP |13C| DC ANALOG INPUT 3 (+) N/U |
| TOP |13D| DC ANALOG INPUT 3 (-) N/U |
| TOP |14C| DC ANALOG INPUT 4 (+) N/U |
| TOP |14D| DC ANALOG INPUT 4 (-) N/U |
| MIDDLE |13D| 600 OHM AUDIO OUTPUT (C) |
| MIDDLE |13C| 600 OHM AUDIO OUTPUT (H) |
| MIDDLE | 3C| HIGH LEVEL 8 OHM AUDIO OUTPUT (C) N/U |
| MIDDLE | 3B| HIGH LEVEL 8 OHM AUDIO OUTPUT (H) N/U |
| BOTTOM | 1| Optional GPS COAX CONNECTION |
R
EFF :
201-203, 34-48-00
Page A32
Config-2 May 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| MIDDLE | 3A| PROGRAM PIN COMMON |
| TOP |15A| 28 VDC DISCRETE INPUT 1 N/U |
| TOP |15B| 28 VDC DISCRETE INPUT 2 N/U |
| TOP |15C| 28 VDC DISCRETE INPUT 3 N/U |
| TOP |15D| 28 VDC DISCRETE INPUT 4 N/U |
| TOP | 7A| 28 VDC DISCRETE INPUT 5 N/U |
| TOP | 7B| 28 VDC DISCRETE INPUT 6 N/U |
| TOP | 7C| 28 VDC DISCRETE INPUT 7 N/U |
| TOP | 7D| 28 VDC DISCRETE INPUT 8 N/U |
| MIDDLE |1A | GND DISCRETE INPUT 1 N/U |
| MIDDLE |9C | GND DISCRETE INPUT 10 LDG FLAP |
| MIDDLE |9D | GND DISCRETE INPUT 11 G/S MANUAL |
| MIDDLE |14A| GND DISCRETE INPUT 12 WXR1 ON/OFF |
| MIDDLE |14B| GND DISCRETE INPUT 13 TAD and TCF INHIBIT|
| TOP | 1A| GND DISCRETE INPUT 15 CAPT TERR SELECTION|
| TOP | 1B| GND DISCRETE INPUT 16 F/O TERR SELECTION |
| MIDDLE | 2B| GND DISCRETE INPUT 17 N/U |
| TOP | 4C| GND DISCRETE INPUT 18 N/U |
| MIDDLE | 5D| GND DISCRETE INPUT 19 ALL AUDIO INHIBIT |
| MIDDLE | 1B| GND DISCRETE INPUT 2 G/S INHIBIT |
| MIDDLE | 7A| GND DISCRETE INPUT 20 N/U |
| MIDDLE | 2A| GND DISCRETE INPUT 3 N/U |
| MIDDLE | 5C| GND DISCRETE INPUT 4 N/U |
| MIDDLE | 7D| GND DISCRETE INPUT 5 INHIBIT MODES 1 TO 5|
| | | (AUDIO AND VISUAL) |
| MIDDLE | 8C| GND DISCRETE INPUT 6 N/U |
| MIDDLE | 8D| GND DISCRETE INPUT 7 AUDIO SUPPRESS |
| | | (MOMENTARY) |
| MIDDLE | 9A| GND DISCRETE INPUT 8 SELF TEST |
| MIDDLE | 9B| GND DISCRETE INPUT 9 LDG GEAR |
| MIDDLE |15D| GND DISCRETE OUTPUT 1 |
| MIDDLE | 3D| GND DISCRETE OUTPUT 2 G/S ALERT OUTPUT |
| MIDDLE | 7B| GND DISCRETE OUTPUT 3 WARNING OUTPUT |
| TOP |12C| GND DISCRETE OUTPUT 4 |
| TOP |12A| GND DISCRETE OUTPUT 5 |
| TOP |12B| GND DISCRETE OUTPUT 6 |
| TOP | 4D| GND DISCRETE OUTPUT 7 |
| TOP |10D| GND DISCRETE OUTPUT 8 CAPT POP-UP OUTPUT |
| MIDDLE |14C| GND DISCRETE OUTPUT 9 F/O POP-UP OUTPUT |
| TOP |11A| GND DISCRETE OUTPUT 10 |
| MIDDLE | 7C| DISCRETE MONITOR OUTPUT 1 GPWS MONITOR |
| | | OUTPUT |
| TOP |12D| DISCRETE MONITOR OUTPUT 2 TERR NOT AVAIL |
| | | OUTPUT |
R
EFF :
201-203, 34-48-00
Page A33
Config-2 May 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| TOP |11B| DISCRETE MONITOR OUTPUT 3 TERRAIN MONITOR|
| | | OUTPUT |
| BOTTOM | 4 | CHASSIS GND |
| BOTTOM | 2 | PRIMARY PWR (H) |
| BOTTOM | 3 | PRIMARY PWR (L) |
| TOP |10A| PROGRAM PIN 1 |
| MIDDLE | 4A| PROGRAM PIN 10 |
| MIDDLE | 4C| PROGRAM PIN 11 |
| TOP | 5B| PROGRAM PIN 12 |
| MIDDLE | 5B| PROGRAM PIN 13 |
| TOP | 2C| PROGRAM PIN 14 |
| MIDDLE |15C| PROGRAM PIN 15 |
| MIDDLE | 8B| PROGRAM PIN 16 |
| TOP | 6D| PROGRAM PIN 17 |
| TOP |10B| PROGRAM PIN 2 |
| TOP |10C| PROGRAM PIN 3 |
| MIDDLE | 4D| PROGRAM PIN 4 |
| MIDDLE | 4B| PROGRAM PIN 5 |
| MIDDLE | 8A| PROGRAM PIN 6 |
| MIDDLE |14D| PROGRAM PIN 7 |
| MIDDLE | 5A| PROGRAM PIN 8 |
| MIDDLE | 2C| PROGRAM PIN 9 |
| TOP | 2D| OUTPUT REF 10.00 VDC |
| TOP | 6C| RS232 RECEIVE |
| TOP | 6B| RS232 TRANSMIT |
| BOTTOM | 5 | Spare |
| MIDDLE |15A| Spare |
| MIDDLE |15B| Spare |
---------------------------------------------------------
(c) Chassis
The chassis is welded aluminum, composed of a top and bottom and
two sides. It provides slots for CCA and space for the front and
rear panel assemblies.
R
EFF :
201-203, 34-48-00
Page A34
Config-2 May 01/08
TAI
(d) PCMCIA interface
The standard Type II PCMCIA interface provided at the front panel
allows for both the uploading and downloading of internal
Enhanced GPWC information. Control of the upload/download process
is accomplished by insertion of the PCMCIA card into the front
panel access. Four LEDs are provided for PCMCIA interface
operation.
The PCMCIA card does not remain installed during normal Enhanced
GPWC operation, and is not intended as an on-line/inflight
storage medium.
1
_ Three-wire serial interface, compatible with RS232
This port can be used to access internal data from the
Enhanced GPWC for both bench simulation and aircraft testing.
Unit configuration and flight history can also be accessed.
This port can also be used to upload software and data bases.
2
_ ARINC 429/422/423 data loader interface
This port can be used to upload software and data bases.
System power is provided on two of the pins for data loader
use.
The Enhanced GPWC front connector pins are listed in the table
below (N/U means Not Used):
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| FRONT | 8 | 429 INPUT 20(A)/422 INPUT 2(A) |
| FRONT |13 | 429 INPUT 20(B)/422 INPUT 2(B) |
| FRONT | 9 | 429 OUTPUT 5(A)/422 OUTPUT 2(A) |
| FRONT |14 | 429 OUTPUT 5(B)/422 OUTPUT 2(B) |
| FRONT | 2 | RESERVED FOR BOOT CODE LOAD N/U |
| FRONT | 6 | PCMCIA BOOT ENABLE N/U |
| FRONT | 11| RS422 SELECT N/U |
| FRONT | 1| Ground |
| FRONT | 10| POWER PIN ISOLATOR |
| FRONT | 15| 115 VAC-C (OR 28 VDC-) |
| FRONT | 5| 115 VAC-H (OR 28 VDC+) |
| FRONT | 3| RS232 RECEIVE |
| FRONT | 4| RS232 TRANSMIT |
| FRONT | 7| Spare |
R
EFF :
201-203, 34-48-00
Page A35
Config-2 May 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| FRONT | 12| Spare |
|FRT JACK| 1 | 600 OHM AUDIO OUTPUT (C) |
|FRT JACK| 2 | 600 OHM AUDIO OUTPUT (H) |
---------------------------------------------------------
A. Enhanced GPWC
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-229, 301-311, 401-404,
34-48-00
Page A36
Config-2 Nov 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| MIDDLE | 6A| 429 INPUT 1(A) ADIRU1 BUS IR (A) |
| MIDDLE | 6B| 429 INPUT 1(B) ADIRU1 BUS IR (B) |
| TOP | 9A| 429 INPUT 10(A) CFDIU (A) |
| TOP | 9B| 429 INPUT 10(B) CFDIU (B) |
| TOP | 8A| 429 INPUT 11(A) WXR1 HZD BUS (A) |
| TOP | 8B| 429 INPUT 11(B) WXR1 HZD BUS (B) |
| TOP | 8C| 429 INPUT 12(A) N/U |
| TOP | 8D| 429 INPUT 12(B) N/U |
| TOP | 5A| 429 INPUT 13(A) N/U |
| TOP | 6A| 429 INPUT 13(B) N/U |
| TOP | 1C| 429 INPUT 14(A) N/U |
| TOP | 1D| 429 INPUT 14(B) N/U |
| TOP | 4A| 429 INPUT 15(A) N/U |
| TOP | 4B| 429 INPUT 15(B) N/U |
| MIDDLE | 6C| 429 INPUT 18(A) WXR2 HZD BUS |
| MIDDLE | 6D| 429 INPUT 18(B) WXR2 HZD BUS |
| MIDDLE |10C| 429 INPUT 2(A) FMGC1 (A) |
| MIDDLE |10D| 429 INPUT 2(B) FMGC1 (B) |
| MIDDLE |11A| 429 INPUT 3(A) ADIRU 1 BUS ADR (A) |
| MIDDLE |11B| 429 INPUT 3(B) ADIRU 1 BUS ADR (B) |
| MIDDLE |12A| 429 INPUT 4(A) FCU 1 (A) |
| MIDDLE |12B| 429 INPUT 4(B) FCU 1 (B) |
| MIDDLE |10A| 429 INPUT 5(A) N/U |
| MIDDLE |10B| 429 INPUT 5(B) N/U |
| MIDDLE |11C| 429 INPUT 6(A) ILS 1 (A) |
| MIDDLE |11D| 429 INPUT 6(B) ILS 1 (B) |
| MIDDLE |12C| 429 INPUT 7(A) FMGC 1 DISCWORD (A) |
| MIDDLE |12D| 429 INPUT 7(B) FMGC 1 DISCWORD (B) |
| MIDDLE |13A| 429 INPUT 8(A) RA 1 (A) |
| MIDDLE |13B| 429 INPUT 8(B) RA 1 (B) |
| TOP | 9C| 429 INPUT 9(A) FCU 2 (A) |
| TOP | 9D| 429 INPUT 9(B) FCU 2 (B) |
| MIDDLE | 1C| 429 OUTPUT 1(A) CFDIU (A) |
| MIDDLE | 1D| 429 OUTPUT 1(B) CFDIU (B) |
| TOP | 2A| 429 OUTPUT 2(A) N/U |
| TOP | 2B| 429 OUTPUT 2(B) N/U |
| TOP | 5C| 429 INPUT 16(A) N/U |
| TOP | 5D| 429 INPUT 16(B) N/U |
| TOP |11C| 429 INPUT 17(A) N/U |
| TOP |11D| 429 INPUT 17(B) N/U |
| TOP | 3A| 453 OUTPUT 1(A) TERR DATA R1 (A) |
| TOP | 3B| 453 OUTPUT 1(B) TERR DATA R1 (B) |
| TOP | 3C| 453 OUTPUT 2(A) TERR DATA R2 (A) |
| TOP | 3D| 453 OUTPUT 2(B) TERR DATA R2 (B) |
R
EFF : 001-050, 053-099, 211-212, 215-215,
218-229, 301-311, 401-404,
34-48-00
Page A37
Config-2 Nov 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| TOP |13A| DC ANALOG INPUT 1 (+) N/U |
| TOP |13B| DC ANALOG INPUT 1 (-) N/U |
| TOP |14A| DC ANALOG INPUT 2 (+) N/U |
| TOP |14B| DC ANALOG INPUT 2 (-) N/U |
| TOP |13C| DC ANALOG INPUT 3 (+) N/U |
| TOP |13D| DC ANALOG INPUT 3 (-) N/U |
| TOP |14C| DC ANALOG INPUT 4 (+) N/U |
| TOP |14D| DC ANALOG INPUT 4 (-) N/U |
| MIDDLE |13D| 600 OHM AUDIO OUTPUT (C) |
| MIDDLE |13C| 600 OHM AUDIO OUTPUT (H) |
| MIDDLE | 3C| HIGH LEVEL 8 OHM AUDIO OUTPUT (C) N/U |
| MIDDLE | 3B| HIGH LEVEL 8 OHM AUDIO OUTPUT (H) N/U |
| BOTTOM | 1| Optional GPS COAX CONNECTION |
| MIDDLE | 3A| PROGRAM PIN COMMON |
| TOP |15A| 28 VDC DISCRETE INPUT 1 N/U |
| TOP |15B| 28 VDC DISCRETE INPUT 2 N/U |
| TOP |15C| 28 VDC DISCRETE INPUT 3 N/U |
| TOP |15D| 28 VDC DISCRETE INPUT 4 N/U |
| TOP | 7A| 28 VDC DISCRETE INPUT 5 N/U |
| TOP | 7B| 28 VDC DISCRETE INPUT 6 N/U |
| TOP | 7C| 28 VDC DISCRETE INPUT 7 N/U |
| TOP | 7D| 28 VDC DISCRETE INPUT 8 N/U |
| MIDDLE |1A | GND DISCRETE INPUT 1 N/U |
| MIDDLE |9C | GND DISCRETE INPUT 10 LDG FLAP |
| MIDDLE |9D | GND DISCRETE INPUT 11 G/S MANUAL |
| MIDDLE |14A| GND DISCRETE INPUT 12 WXR1 ON/OFF |
| MIDDLE |14B| GND DISCRETE INPUT 13 TAD and TCF INHIBIT|
| MIDDLE | 2D| GND DISCRETE INPUT 14 WXR2 ON/OFF |
| TOP | 1A| GND DISCRETE INPUT 15 CAPT TERR SELECTION|
| TOP | 1B| GND DISCRETE INPUT 16 F/O TERR SELECTION |
| MIDDLE | 2B| GND DISCRETE INPUT 17 N/U |
| TOP | 4C| GND DISCRETE INPUT 18 N/U |
| MIDDLE | 5D| GND DISCRETE INPUT 19 ALL AUDIO INHIBIT |
| MIDDLE | 1B| GND DISCRETE INPUT 2 G/S INHIBIT |
| MIDDLE | 7A| GND DISCRETE INPUT 20 N/U |
| MIDDLE | 2A| GND DISCRETE INPUT 3 N/U |
| MIDDLE | 5C| GND DISCRETE INPUT 4 N/U |
| MIDDLE | 7D| GND DISCRETE INPUT 5 INHIBIT MODES 1 TO 5|
| | | (AUDIO AND VISUAL) |
| MIDDLE | 8C| GND DISCRETE INPUT 6 N/U |
| MIDDLE | 8D| GND DISCRETE INPUT 7 AUDIO SUPPRESS |
| | | (MOMENTARY) |
| MIDDLE | 9A| GND DISCRETE INPUT 8 SELF TEST |
| MIDDLE | 9B| GND DISCRETE INPUT 9 LDG GEAR |
R
EFF : 001-050, 053-099, 211-212, 215-215,
218-229, 301-311, 401-404,
34-48-00
Page A38
Config-2 Nov 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| MIDDLE |15D| GND DISCRETE OUTPUT 1 |
| MIDDLE | 3D| GND DISCRETE OUTPUT 2 G/S ALERT OUTPUT |
| MIDDLE | 7B| GND DISCRETE OUTPUT 3 WARNING OUTPUT |
| TOP |12C| GND DISCRETE OUTPUT 4 |
| TOP |12A| GND DISCRETE OUTPUT 5 |
| TOP |12B| GND DISCRETE OUTPUT 6 |
| TOP | 4D| GND DISCRETE OUTPUT 7 |
| TOP |10D| GND DISCRETE OUTPUT 8 CAPT POP-UP OUTPUT |
| MIDDLE |14C| GND DISCRETE OUTPUT 9 F/O POP-UP OUTPUT |
| TOP |11A| GND DISCRETE OUTPUT 10 |
| MIDDLE | 7C| DISCRETE MONITOR OUTPUT 1 GPWS MONITOR |
| | | OUTPUT |
| TOP |12D| DISCRETE MONITOR OUTPUT 2 TERR NOT AVAIL |
| | | OUTPUT |
| TOP |11B| DISCRETE MONITOR OUTPUT 3 TERRAIN MONITOR|
| | | OUTPUT |
| BOTTOM | 4 | CHASSIS GND |
| BOTTOM | 2 | PRIMARY PWR (H) |
| BOTTOM | 3 | PRIMARY PWR (L) |
| TOP |10A| PROGRAM PIN 1 |
| MIDDLE | 4A| PROGRAM PIN 10 |
| MIDDLE | 4C| PROGRAM PIN 11 |
| TOP | 5B| PROGRAM PIN 12 |
| MIDDLE | 5B| PROGRAM PIN 13 |
| TOP | 2C| PROGRAM PIN 14 |
| MIDDLE |15C| PROGRAM PIN 15 |
| MIDDLE | 8B| PROGRAM PIN 16 |
| TOP | 6D| PROGRAM PIN 17 |
| TOP |10B| PROGRAM PIN 2 |
| TOP |10C| PROGRAM PIN 3 |
| MIDDLE | 4D| PROGRAM PIN 4 |
| MIDDLE | 4B| PROGRAM PIN 5 |
| MIDDLE | 8A| PROGRAM PIN 6 |
| MIDDLE |14D| PROGRAM PIN 7 |
| MIDDLE | 5A| PROGRAM PIN 8 |
| MIDDLE | 2C| PROGRAM PIN 9 |
| TOP | 2D| OUTPUT REF 10.00 VDC |
| TOP | 6C| RS232 RECEIVE |
| TOP | 6B| RS232 TRANSMIT |
| BOTTOM | 5 | Spare |
| MIDDLE |15A| Spare |
| MIDDLE |15B| Spare |
---------------------------------------------------------
R
EFF : 001-050, 053-099, 211-212, 215-215,
218-229, 301-311, 401-404,
34-48-00
Page A39
Config-2 Nov 01/08
TAI
(b) Front panel assembly
The front panel assembly contains identification and modification
status labels, status LEDs, a latched door for access to a
SELF-TEST pushbutton switch, a HEADPHONE jack, a RS232 test
connector (P1), and a Personal Computing Memory Card Interface
Adapter (PCMCIA) interface and status LEDs. There is also a
handle for ease of carrying and installation/removal, and a
hold-down hook for securing at installation.
(c) Chassis
The chassis is welded aluminum, composed of a top and bottom and
two sides. It provides slots for CCA and space for the front and
rear panel assemblies.
1
_ Three-wire serial interface, compatible with RS232
This port can be used to access internal data from the
Enhanced GPWC for both bench simulation and aircraft testing.
Unit configuration and flight history can also be accessed.
This port can also be used to upload software and data bases.
2
_ ARINC 429/422/423 data loader interface
This port can be used to upload software and data bases.
System power is provided on two of the pins for data loader
use.
The Enhanced GPWC front connector pins are listed in the table
below (N/U means Not Used):
R
EFF : 001-050, 053-099, 211-212, 215-215,
218-229, 301-311, 401-404,
34-48-00
Page A40
Config-2 Nov 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| FRONT | 8 | 429 INPUT 20(A)/422 INPUT 2(A) |
| FRONT |13 | 429 INPUT 20(B)/422 INPUT 2(B) |
| FRONT | 9 | 429 OUTPUT 5(A)/422 OUTPUT 2(A) |
| FRONT |14 | 429 OUTPUT 5(B)/422 OUTPUT 2(B) |
| FRONT | 2 | RESERVED FOR BOOT CODE LOAD N/U |
| FRONT | 6 | PCMCIA BOOT ENABLE N/U |
| FRONT | 11| RS422 SELECT N/U |
| FRONT | 1| Ground |
| FRONT | 10| POWER PIN ISOLATOR |
| FRONT | 15| 115 VAC-C (OR 28 VDC-) |
| FRONT | 5| 115 VAC-H (OR 28 VDC+) |
| FRONT | 3| RS232 RECEIVE |
| FRONT | 4| RS232 TRANSMIT |
| FRONT | 7| Spare |
| FRONT | 12| Spare |
|FRT JACK| 1 | 600 OHM AUDIO OUTPUT (C) |
|FRT JACK| 2 | 600 OHM AUDIO OUTPUT (H) |
---------------------------------------------------------
A. Enhanced GPWC
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-229, 301-311, 401-404,
34-48-00
Page A41
Config-2 Nov 01/08
TAI
orientation 08 or 10 in accordance with ARINC 723-1
recommendations for GPWS.
The rear panel assembly also contains the interconnection between
the aircraft interface connector and the internal interface
Circuit Card Assembly (CCA), A5, and the Backplane CCA, A4, which
provide all internal electrical interconnects between CCAs and
other circuitry.
The Enhanced GPWC pins are listed in the table below (N/U means
Not Used):
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| MIDDLE | 6A| 429 INPUT 1(A) ADIRU1 BUS IR (A) |
| MIDDLE | 6B| 429 INPUT 1(B) ADIRU1 BUS IR (B) |
| TOP | 9A| 429 INPUT 10(A) CFDIU (A) |
| TOP | 9B| 429 INPUT 10(B) CFDIU (B) |
| TOP | 8A| 429 INPUT 11(A) WXR1 HZD BUS (A) |
| TOP | 8B| 429 INPUT 11(B) WXR1 HZD BUS (B) |
| TOP | 8C| 429 INPUT 12(A) N/U |
| TOP | 8D| 429 INPUT 12(B) N/U |
| TOP | 5A| 429 INPUT 13(A) N/U |
| TOP | 6A| 429 INPUT 13(B) N/U |
| TOP | 1C| 429 INPUT 14(A) N/U |
| TOP | 1D| 429 INPUT 14(B) N/U |
| TOP | 4A| 429 INPUT 15(A) N/U |
| TOP | 4B| 429 INPUT 15(B) N/U |
| MIDDLE | 6C| 429 INPUT 18(A) WXR2 HZD BUS |
| MIDDLE | 6D| 429 INPUT 18(B) WXR2 HZD BUS |
| MIDDLE |10C| 429 INPUT 2(A) FMGC1 (A) |
| MIDDLE |10D| 429 INPUT 2(B) FMGC1 (B) |
| MIDDLE |11A| 429 INPUT 3(A) ADIRU 1 BUS ADR (A) |
| MIDDLE |11B| 429 INPUT 3(B) ADIRU 1 BUS ADR (B) |
| MIDDLE |12A| 429 INPUT 4(A) FCU 1 (A) |
| MIDDLE |12B| 429 INPUT 4(B) FCU 1 (B) |
| MIDDLE |10A| 429 INPUT 5(A) N/U |
| MIDDLE |10B| 429 INPUT 5(B) N/U |
| MIDDLE |11C| 429 INPUT 6(A) ILS 1 (A) |
| MIDDLE |11D| 429 INPUT 6(B) ILS 1 (B) |
| MIDDLE |12C| 429 INPUT 7(A) FMGC 1 (A) |
| MIDDLE |12D| 429 INPUT 7(B) FMGC 1 (B) |
| MIDDLE |13A| 429 INPUT 8(A) RA 1 (A) |
| MIDDLE |13B| 429 INPUT 8(B) RA 1 (B) |
| TOP | 9C| 429 INPUT 9(A) FCU 2 (A) |
| TOP | 9D| 429 INPUT 9(B) FCU 2 (B) |
| MIDDLE | 1C| 429 OUTPUT 1(A) CFDIU (A) |
| MIDDLE | 1D| 429 OUTPUT 1(B) CFDIU (B) |
R
EFF :
201-203, 34-48-00
Page A42
Config-2 May 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| TOP | 2A| 429 OUTPUT 2(A) N/U |
| TOP | 2B| 429 OUTPUT 2(B) N/U |
| TOP | 5C| 429 INPUT 16(A) N/U |
| TOP | 5D| 429 INPUT 16(B) N/U |
| TOP |11C| 429 INPUT 17(A) GPS1 BUS |
| TOP |11D| 429 INPUT 17(B) GPS1 BUS |
| TOP | 3A| 453 OUTPUT 1(A) TERR DATA R1 (A) |
| TOP | 3B| 453 OUTPUT 1(B) TERR DATA R1 (B) |
| TOP | 3C| 453 OUTPUT 2(A) TERR DATA R2 (A) |
| TOP | 3D| 453 OUTPUT 2(B) TERR DATA R2 (B) |
| TOP |13A| DC ANALOG INPUT 1 (+) N/U |
| TOP |13B| DC ANALOG INPUT 1 (-) N/U |
| TOP |14A| DC ANALOG INPUT 2 (+) N/U |
| TOP |14B| DC ANALOG INPUT 2 (-) N/U |
| TOP |13C| DC ANALOG INPUT 3 (+) N/U |
| TOP |13D| DC ANALOG INPUT 3 (-) N/U |
| TOP |14C| DC ANALOG INPUT 4 (+) N/U |
| TOP |14D| DC ANALOG INPUT 4 (-) N/U |
| MIDDLE |13D| 600 OHM AUDIO OUTPUT (C) |
| MIDDLE |13C| 600 OHM AUDIO OUTPUT (H) |
| MIDDLE | 3C| HIGH LEVEL 8 OHM AUDIO OUTPUT (C) N/U |
| MIDDLE | 3B| HIGH LEVEL 8 OHM AUDIO OUTPUT (H) N/U |
| BOTTOM | 1| Optional GPS COAX CONNECTION |
| MIDDLE | 3A| PROGRAM PIN COMMON |
| TOP |15A| 28 VDC DISCRETE INPUT 1 N/U |
| TOP |15B| 28 VDC DISCRETE INPUT 2 N/U |
| TOP |15C| 28 VDC DISCRETE INPUT 3 N/U |
| TOP |15D| 28 VDC DISCRETE INPUT 4 N/U |
| TOP | 7A| 28 VDC DISCRETE INPUT 5 N/U |
| TOP | 7B| 28 VDC DISCRETE INPUT 6 N/U |
| TOP | 7C| 28 VDC DISCRETE INPUT 7 N/U |
| TOP | 7D| 28 VDC DISCRETE INPUT 8 N/U |
| MIDDLE |1A | GND DISCRETE INPUT 1 N/U |
| MIDDLE |9C | GND DISCRETE INPUT 10 LDG FLAP |
| MIDDLE |9D | GND DISCRETE INPUT 11 G/S MANUAL |
| MIDDLE |14A| GND DISCRETE INPUT 12 WXR1 ON/OFF |
| MIDDLE |14B| GND DISCRETE INPUT 13 TAD and TCF INHIBIT|
| MIDDLE | 2D| GND DISCRETE INPUT 14 WXR2 ON/OFF |
| TOP | 1A| GND DISCRETE INPUT 15 F/O TERR SELECTION |
| TOP | 1B| GND DISCRETE INPUT 16 CAPT TERR SELECTION|
| MIDDLE | 2B| GND DISCRETE INPUT 17 N/U |
| TOP | 4C| GND DISCRETE INPUT 18 RAAS ENABLE |
| MIDDLE | 5D| GND DISCRETE INPUT 19 ALL AUDIO INHIBIT |
| MIDDLE | 1B| GND DISCRETE INPUT 2 G/S INHIBIT |
R
EFF :
201-203, 34-48-00
Page A43
Config-2 May 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| MIDDLE | 7A| GND DISCRETE INPUT 20 N/U |
| MIDDLE | 2A| GND DISCRETE INPUT 3 N/U |
| MIDDLE | 5C| GND DISCRETE INPUT 4 N/U |
| MIDDLE | 7D| GND DISCRETE INPUT 5 INHIBIT MODES 1 TO 5|
| | | (AUDIO AND VISUAL) |
| MIDDLE | 8C| GND DISCRETE INPUT 6 N/U |
| MIDDLE | 8D| GND DISCRETE INPUT 7 AUDIO SUPPRESS |
| | | (MOMENTARY) |
| MIDDLE | 9A| GND DISCRETE INPUT 8 SELF TEST |
| MIDDLE | 9B| GND DISCRETE INPUT 9 LDG GEAR |
| MIDDLE |15D| GND DISCRETE OUTPUT 1 G/S OFF LAMP |
| MIDDLE | 3D| GND DISCRETE OUTPUT 2 GPWS ALERT OUTPUT |
| MIDDLE | 7B| GND DISCRETE OUTPUT 3 PULL UP WARNG OUTPT|
| TOP |12C| GND DISCRETE OUTPUT 4 |
| TOP |12A| GND DISCRETE OUTPUT 5 |
| TOP |12B| GND DISCRETE OUTPUT 6 |
| TOP | 4D| GND DISCRETE OUTPUT 7 |
| TOP |10D| GND DISCRETE OUTPUT 8 CAPT POP-UP OUTPUT |
| MIDDLE |14C| GND DISCRETE OUTPUT 9 F/O POP-UP OUTPUT |
| TOP |11A| GND DISCRETE OUTPUT 10 |
| MIDDLE | 7C| DISCRETE MONITOR OUTPUT 1 GPWS MONITOR |
| | | OUTPUT |
| TOP |12D| DISCRETE MONITOR OUTPUT 2 TERR NOT AVAIL |
| | | OUTPUT |
| TOP |11B| DISCRETE MONITOR OUTPUT 3 TERRAIN MONITOR|
| | | OUTPUT |
| BOTTOM | 4 | CHASSIS GND |
| BOTTOM | 2 | PRIMARY PWR (H) |
| BOTTOM | 3 | PRIMARY PWR (L) |
| TOP |10A| PROGRAM PIN 1 |
| MIDDLE | 4A| PROGRAM PIN 10 |
| MIDDLE | 4C| PROGRAM PIN 11 |
| TOP | 5B| PROGRAM PIN 12 |
| MIDDLE | 5B| PROGRAM PIN 13 |
| TOP | 2C| PROGRAM PIN 14 |
| MIDDLE |15C| PROGRAM PIN 15 |
| MIDDLE | 8B| PROGRAM PIN 16 |
| TOP | 6D| PROGRAM PIN 17 |
| TOP |10B| PROGRAM PIN 2 |
| TOP |10C| PROGRAM PIN 3 |
| MIDDLE | 4D| PROGRAM PIN 4 |
| MIDDLE | 4B| PROGRAM PIN 5 |
| MIDDLE | 8A| PROGRAM PIN 6 |
| MIDDLE |14D| PROGRAM PIN 7 |
R
EFF :
201-203, 34-48-00
Page A44
Config-2 May 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| MIDDLE | 5A| PROGRAM PIN 8 |
| MIDDLE | 2C| PROGRAM PIN 9 |
| TOP | 2D| OUTPUT REF 10.00 VDC |
| TOP | 6C| RS232 RECEIVE |
| TOP | 6B| RS232 TRANSMIT |
| BOTTOM | 5 | Spare |
| MIDDLE |15A| PROGRAM PIN 18 |
| MIDDLE |15B| PROGRAM PIN 1 |
---------------------------------------------------------
(c) Chassis
The chassis is welded aluminum, composed of a top and bottom and
two sides. It provides slots for CCA and space for the front and
rear panel assemblies.
1
_ Three-wire serial interface, compatible with RS232
This port can be used to access internal data from the
Enhanced GPWC for both bench simulation and aircraft testing.
R
EFF :
201-203, 34-48-00
Page A45
Config-2 May 01/08
TAI
Unit configuration and flight history can also be accessed.
This port can also be used to upload software and data bases.
2
_ ARINC 429/422/423 data loader interface
This port can be used to upload software and data bases.
System power is provided on two of the pins for data loader
use.
The Enhanced GPWC front connector pins are listed in the table
below (N/U means Not Used):
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| FRONT | 8 | 429 INPUT 20(A)/422 INPUT 2(A) |
| FRONT |13 | 429 INPUT 20(B)/422 INPUT 2(B) |
| FRONT | 9 | 429 OUTPUT 5(A)/422 OUTPUT 2(A) |
| FRONT |14 | 429 OUTPUT 5(B)/422 OUTPUT 2(B) |
| FRONT | 2 | RESERVED FOR BOOT CODE LOAD N/U |
| FRONT | 6 | PCMCIA BOOT ENABLE N/U |
| FRONT | 11| Spare |
| FRONT | 1| Ground |
| FRONT | 10| Spare |
| FRONT | 15| Spare |
| FRONT | 5| Spare |
| FRONT | 3| RS232 RECEIVE |
| FRONT | 4| RS232 TRANSMIT |
| FRONT | 7| Spare |
| FRONT | 12| Spare |
|FRT JACK| 1 | 600 OHM AUDIO OUTPUT (C) |
|FRT JACK| 2 | 600 OHM AUDIO OUTPUT (H) |
---------------------------------------------------------
A. Enhanced GPWC
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page A46
Config-2 Nov 01/08
TAI
- chassis,
- PCMCIA interface,
- front connector.
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| MIDDLE | 6A| 429 INPUT 1(A) ADIRU1 BUS IR (A) |
| MIDDLE | 6B| 429 INPUT 1(B) ADIRU1 BUS IR (B) |
| TOP | 9A| 429 INPUT 10(A) CFDIU (A) |
| TOP | 9B| 429 INPUT 10(B) CFDIU (B) |
| TOP | 8A| 429 INPUT 11(A) WXR1 HZD BUS (A) |
| TOP | 8B| 429 INPUT 11(B) WXR1 HZD BUS (B) |
| TOP | 8C| 429 INPUT 12(A) N/U |
| TOP | 8D| 429 INPUT 12(B) N/U |
| TOP | 5A| 429 INPUT 13(A) N/U |
| TOP | 6A| 429 INPUT 13(B) N/U |
| TOP | 1C| 429 INPUT 14(A) N/U |
| TOP | 1D| 429 INPUT 14(B) N/U |
| TOP | 4A| 429 INPUT 15(A) N/U |
| TOP | 4B| 429 INPUT 15(B) N/U |
| MIDDLE | 6C| 429 INPUT 18(A) WXR2 HZD BUS |
| MIDDLE | 6D| 429 INPUT 18(B) WXR2 HZD BUS |
| MIDDLE |10C| 429 INPUT 2(A) FMGC1 (A) |
| MIDDLE |10D| 429 INPUT 2(B) FMGC1 (B) |
| MIDDLE |11A| 429 INPUT 3(A) ADIRU 1 BUS ADR (A) |
| MIDDLE |11B| 429 INPUT 3(B) ADIRU 1 BUS ADR (B) |
| MIDDLE |12A| 429 INPUT 4(A) FCU 1 (A) |
| MIDDLE |12B| 429 INPUT 4(B) FCU 1 (B) |
| MIDDLE |10A| 429 INPUT 5(A) N/U |
| MIDDLE |10B| 429 INPUT 5(B) N/U |
| MIDDLE |11C| 429 INPUT 6(A) ILS 1 (A) |
R
EFF : 211-211, 215-215, 219-299, 301-302,
306-309, 312-399, 401-499,
34-48-00
Page A47
Config-2 Nov 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| MIDDLE |11D| 429 INPUT 6(B) ILS 1 (B) |
| MIDDLE |12C| 429 INPUT 7(A) FMGC 1 DISCWORD (A) |
| MIDDLE |12D| 429 INPUT 7(B) FMGC 1 DISCWORD (B) |
| MIDDLE |13A| 429 INPUT 8(A) RA 1 (A) |
| MIDDLE |13B| 429 INPUT 8(B) RA 1 (B) |
| TOP | 9C| 429 INPUT 9(A) FCU 2 (A) |
| TOP | 9D| 429 INPUT 9(B) FCU 2 (B) |
| MIDDLE | 1C| 429 OUTPUT 1(A) CFDIU (A) |
| MIDDLE | 1D| 429 OUTPUT 1(B) CFDIU (B) |
| TOP | 2A| 429 OUTPUT 2(A) N/U |
| TOP | 2B| 429 OUTPUT 2(B) N/U |
| TOP | 5C| 429 INPUT 16(A) N/U |
| TOP | 5D| 429 INPUT 16(B) N/U |
| TOP |11C| 429 INPUT 17(A) GPS1 BUS |
| TOP |11D| 429 INPUT 17(B) GPS1 BUS |
| TOP | 3A| 453 OUTPUT 1(A) TERR DATA R1 (A) |
| TOP | 3B| 453 OUTPUT 1(B) TERR DATA R1 (B) |
| TOP | 3C| 453 OUTPUT 2(A) TERR DATA R2 (A) |
| TOP | 3D| 453 OUTPUT 2(B) TERR DATA R2 (B) |
| TOP |13A| DC ANALOG INPUT 1 (+) N/U |
| TOP |13B| DC ANALOG INPUT 1 (-) N/U |
| TOP |14A| DC ANALOG INPUT 2 (+) N/U |
| TOP |14B| DC ANALOG INPUT 2 (-) N/U |
| TOP |13C| DC ANALOG INPUT 3 (+) N/U |
| TOP |13D| DC ANALOG INPUT 3 (-) N/U |
| TOP |14C| DC ANALOG INPUT 4 (+) N/U |
| TOP |14D| DC ANALOG INPUT 4 (-) N/U |
| MIDDLE |13D| 600 OHM AUDIO OUTPUT (C) |
| MIDDLE |13C| 600 OHM AUDIO OUTPUT (H) |
| MIDDLE | 3C| HIGH LEVEL 8 OHM AUDIO OUTPUT (C) N/U |
| MIDDLE | 3B| HIGH LEVEL 8 OHM AUDIO OUTPUT (H) N/U |
| BOTTOM | 1| Optional GPS COAX CONNECTION |
| MIDDLE | 3A| PROGRAM PIN COMMON |
| TOP |15A| 28 VDC DISCRETE INPUT 1 N/U |
| TOP |15B| 28 VDC DISCRETE INPUT 2 N/U |
| TOP |15C| 28 VDC DISCRETE INPUT 3 N/U |
| TOP |15D| 28 VDC DISCRETE INPUT 4 N/U |
| TOP | 7A| 28 VDC DISCRETE INPUT 5 N/U |
| TOP | 7B| 28 VDC DISCRETE INPUT 6 N/U |
| TOP | 7C| 28 VDC DISCRETE INPUT 7 N/U |
| TOP | 7D| 28 VDC DISCRETE INPUT 8 N/U |
| MIDDLE |1A | GND DISCRETE INPUT 1 N/U |
| MIDDLE |9C | GND DISCRETE INPUT 10 LDG FLAP |
| MIDDLE |9D | GND DISCRETE INPUT 11 G/S MANUAL |
R
EFF : 211-211, 215-215, 219-299, 301-302,
306-309, 312-399, 401-499,
34-48-00
Page A48
Config-2 Nov 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| MIDDLE |14A| GND DISCRETE INPUT 12 WXR1 ON/OFF |
| MIDDLE |14B| GND DISCRETE INPUT 13 TAD and TCF INHIBIT|
| MIDDLE | 2D| GND DISCRETE INPUT 14 WXR2 ON/OFF |
| TOP | 1A| GND DISCRETE INPUT 15 CAPT TERR SELECTION|
| TOP | 1B| GND DISCRETE INPUT 16 F/O TERR SELECTION |
| MIDDLE | 2B| GND DISCRETE INPUT 17 N/U |
| TOP | 4C| GND DISCRETE INPUT 18 N/U |
| MIDDLE | 5D| GND DISCRETE INPUT 19 ALL AUDIO INHIBIT |
| MIDDLE | 1B| GND DISCRETE INPUT 2 G/S INHIBIT |
| MIDDLE | 7A| GND DISCRETE INPUT 20 N/U |
| MIDDLE | 2A| GND DISCRETE INPUT 3 N/U |
| MIDDLE | 5C| GND DISCRETE INPUT 4 N/U |
| MIDDLE | 7D| GND DISCRETE INPUT 5 INHIBIT MODES 1 TO 5|
| | | (AUDIO AND VISUAL) |
| MIDDLE | 8C| GND DISCRETE INPUT 6 N/U |
| MIDDLE | 8D| GND DISCRETE INPUT 7 AUDIO SUPPRESS |
| | | (MOMENTARY) |
| MIDDLE | 9A| GND DISCRETE INPUT 8 SELF TEST |
| MIDDLE | 9B| GND DISCRETE INPUT 9 LDG GEAR |
| MIDDLE |15D| GND DISCRETE OUTPUT 1 |
| MIDDLE | 3D| GND DISCRETE OUTPUT 2 G/S ALERT OUTPUT |
| MIDDLE | 7B| GND DISCRETE OUTPUT 3 WARNING OUTPUT |
| TOP |12C| GND DISCRETE OUTPUT 4 |
| TOP |12A| GND DISCRETE OUTPUT 5 |
| TOP |12B| GND DISCRETE OUTPUT 6 |
| TOP | 4D| GND DISCRETE OUTPUT 7 |
| TOP |10D| GND DISCRETE OUTPUT 8 CAPT POP-UP OUTPUT |
| MIDDLE |14C| GND DISCRETE OUTPUT 9 F/O POP-UP OUTPUT |
| TOP |11A| GND DISCRETE OUTPUT 10 |
| MIDDLE | 7C| DISCRETE MONITOR OUTPUT 1 GPWS MONITOR |
| | | OUTPUT |
| TOP |12D| DISCRETE MONITOR OUTPUT 2 TERR NOT AVAIL |
| | | OUTPUT |
| TOP |11B| DISCRETE MONITOR OUTPUT 3 TERRAIN MONITOR|
| | | OUTPUT |
| BOTTOM | 4 | CHASSIS GND |
| BOTTOM | 2 | PRIMARY PWR (H) |
| BOTTOM | 3 | PRIMARY PWR (L) |
| TOP |10A| PROGRAM PIN 1 |
| MIDDLE | 4A| PROGRAM PIN 10 |
| MIDDLE | 4C| PROGRAM PIN 11 |
| TOP | 5B| PROGRAM PIN 12 |
| MIDDLE | 5B| PROGRAM PIN 13 |
| TOP | 2C| PROGRAM PIN 14 |
R
EFF : 211-211, 215-215, 219-299, 301-302,
306-309, 312-399, 401-499,
34-48-00
Page A49
Config-2 Nov 01/08
TAI
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| MIDDLE |15C| PROGRAM PIN 15 |
| MIDDLE | 8B| PROGRAM PIN 16 |
| TOP | 6D| PROGRAM PIN 17 |
| TOP |10B| PROGRAM PIN 2 |
| TOP |10C| PROGRAM PIN 3 |
| MIDDLE | 4D| PROGRAM PIN 4 |
| MIDDLE | 4B| PROGRAM PIN 5 |
| MIDDLE | 8A| PROGRAM PIN 6 |
| MIDDLE |14D| PROGRAM PIN 7 |
| MIDDLE | 5A| PROGRAM PIN 8 |
| MIDDLE | 2C| PROGRAM PIN 9 |
| TOP | 2D| OUTPUT REF 10.00 VDC |
| TOP | 6C| RS232 RECEIVE |
| TOP | 6B| RS232 TRANSMIT |
| BOTTOM | 5 | Spare |
| MIDDLE |15A| Spare |
| MIDDLE |15B| Spare |
---------------------------------------------------------
(c) Chassis
The chassis is welded aluminum, composed of a top and bottom and
two sides. It provides slots for CCA and space for the front and
rear panel assemblies.
R
EFF : 211-211, 215-215, 219-299, 301-302,
306-309, 312-399, 401-499,
34-48-00
Page A50
Config-2 Nov 01/08
TAI
(e) Front connector
A 15-pin (double density, D-Sub) test connector is located on the
front panel, which provides for connection to either a CRT
terminal or a PC.
This connector provides the following interfaces:
1
_ Three-wire serial interface, compatible with RS232
This port can be used to access internal data from the
Enhanced GPWC for both bench simulation and aircraft testing.
Unit configuration and flight history can also be accessed.
This port can also be used to upload software and data bases.
2
_ ARINC 429/422/423 data loader interface
This port can be used to upload software and data bases.
System power is provided on two of the pins for data loader
use.
The Enhanced GPWC front connector pins are listed in the table
below (N/U means Not Used):
---------------------------------------------------------
|LRU Con |Pin| Description |
---------------------------------------------------------
| FRONT | 8 | 429 INPUT 20(A)/422 INPUT 2(A) |
| FRONT |13 | 429 INPUT 20(B)/422 INPUT 2(B) |
| FRONT | 9 | 429 OUTPUT 5(A)/422 OUTPUT 2(A) |
| FRONT |14 | 429 OUTPUT 5(B)/422 OUTPUT 2(B) |
| FRONT | 2 | RESERVED FOR BOOT CODE LOAD N/U |
| FRONT | 6 | PCMCIA BOOT ENABLE N/U |
| FRONT | 11| RS422 SELECT N/U |
| FRONT | 1| Ground |
| FRONT | 10| POWER PIN ISOLATOR |
| FRONT | 15| 115 VAC-C (OR 28 VDC-) |
| FRONT | 5| 115 VAC-H (OR 28 VDC+) |
| FRONT | 3| RS232 RECEIVE |
| FRONT | 4| RS232 TRANSMIT |
| FRONT | 7| Spare |
| FRONT | 12| Spare |
|FRT JACK| 1 | 600 OHM AUDIO OUTPUT (C) |
|FRT JACK| 2 | 600 OHM AUDIO OUTPUT (H) |
---------------------------------------------------------
R
EFF : 211-211, 215-215, 219-299, 301-302,
306-309, 312-399, 401-499,
34-48-00
Page A51
Config-2 Nov 01/08
TAI
**ON A/C ALL
1
_ The controller card contains the main processor
(microprocessor 486DX4), the Digital Information Transfer
System (DITS) handler microcontroller and the image generator
DSP.
2
_ The accessory card contains the power supply and the voice
generator DSP.
3
_ The analog acquisition card contains the analog acquisition
microcontroller.
B. Pushbutton Switches
EFF :
ALL 34-48-00
Page A52
Config-2 Nov 01/08
TAI
Enhanced GPWC - Block Diagram
Figure 009
EFF :
ALL 34-48-00
Page A53
Config-2 May 01/08
R
TAI
R **ON A/C 001-050, 053-099, 223-234, 307-311, 401-404,
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-234, 301-311, 401-404,
34-48-00
Page A54
Config-2 Nov 01/08
TAI
Enhanced GPWS - Messages Displayed on Upper and Lower ECAM DU
Figure 010
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-234, 301-311, 401-404,
34-48-00
Page A55
Config-2 Nov 01/08
TAI
(5) GPWS/TERR pushbutton switch 31WZ
- When this pushbutton switch (item 1) is pressed (white OFF legend
on), the TAD and TCF functions are inhibited (visual display and
audio inhibition).
- The pushbutton switch provides a FAULT warning indicating that a
failure of TAD and/or TCF functions has been detected by the
Enhanced GPWC.
When the FAULT legend comes on, the following messages are
displayed:
. on the upper ECAM display unit if they are not inhibited by the
FWC:
NAV - GPWS TERR DET FAULT (amber)
GPWS TERR.............OFF (cyan)
. in the INOP SYS item, on the STATUS page of the lower ECAM
display unit:
GPWS TERR (amber)
A fault message is sent to the CFDIU.
B. Pushbutton Switches
EFF :
ALL 34-48-00
Page A56
Config-2 Nov 01/08
TAI
**ON A/C ALL
EFF :
ALL 34-48-00
Page A57
Config-2 Nov 01/08
TAI
Enhanced GPWS - Messages Displayed on Upper and Lower ECAM DU
Figure 010A
R
EFF :
ALL 34-48-00
Page A58
Config-2 May 01/08
TAI
(5) GPWS/TERR pushbutton switch 31WZ
- When this pushbutton switch (item 1) is pressed (white OFF legend
on), the TAD and TCF functions are inhibited (visual display and
audio inhibition).
- The pushbutton switch provides a FAULT warning indicating that a
failure of TAD and/or TCF functions has been detected by the
Enhanced GPWC.
When the FAULT legend comes on, the following messages are
displayed:
. on the upper ECAM display unit if they are not inhibited by the
FWC:
TERR OFF (green or amber)
GPWS TERR.............OFF (cyan)
. in the INOP SYS item, on the STATUS page of the lower ECAM
display unit:
GPWS TERR (amber)
A fault message is sent to the CFDIU.
(6) CAPT and F/O PULL UP/GPWS pushbutton switches 5WZ and 4WZ
These pushbutton switches, located on panels 301VU and 500VU, have
two functions when pressed (in):
- they cancel the glide slope alert, or
- they initiate the self-test sequence if the aircraft is on ground.
(7) CAPT and F/O TERR ON ND pushbutton switches 30WZ1 and 30WZ2
These pushbutton switches (items 6 and 7) allow the crew to select or
deselect terrain display on ND.
The ON legends indicate that terrain data is displayed on ND
(following manual or automatic pop up selection).
(6) CAPT and F/O GPWS/G/S pushbutton switches 5WZ and 4WZ
These pushbutton switches, located on panels 301VU and 500VU, have
two functions when pressed (in):
- they cancel the glide slope alert, or
- they initiate the self-test sequence if the aircraft is on ground.
(7) CAPT and F/O TERR ON ND pushbutton switches 30WZ1 and 30WZ2
These pushbutton switches (items 6 and 7) allow the crew to select or
deselect terrain display on ND.
The ON legends indicate that terrain data is displayed on ND
(following manual or automatic pop up selection).
EFF :
ALL 34-48-00
Page A59
Config-2 Nov 01/08
TAI
**ON A/C ALL
7. Operation
_________
A. General
EFF :
ALL 34-48-00
Page A60
Config-2 Feb 01/09
TAI
MODE AURAL ALERTS VISUAL ALERTS
1 SINK RATE GPWS
1 PULL UP GPWS
2 TERRAIN GPWS
2 TERRAIN TERRAIN GPWS
2 PULL UP GPWS
3 DONT SINK DONT SINK GPWS
4 TOO LOW TERRAIN GPWS
4 TOO LOW GEAR GPWS
4 TOO LOW FLAPS GPWS
5 GLIDE SLOPE G/S
TAD TERRAIN AHEAD GPWS
TAD TERRAIN AHEAD PULL UP GPWS
TCF TOO LOW TERRAIN GPWS
Each of these alerts inhibits the automatic call out.
EFF : 201-203, 211-212, 215-215, 218-228,
301-309, 401-401,
34-48-00
Page A61
Config-2 Feb 01/09
TAI
**ON A/C 229-229, 307-307, 310-311, 402-404,
R
EFF : 001-050, 053-099, 229-229, 307-307,
310-311, 402-404,
34-48-00
Page A62
Config-2 Feb 01/09
TAI
R MODE AURAL ALERTS VISUAL ALERTS
R 1 SINK RATE GPWS
R 1 PULL UP PULL UP
R 2 TERRAIN GPWS
R 2 TERRAIN TERRAIN GPWS
R 2 PULL UP PULL UP
R 3 DONT SINK DONT SINK GPWS
R 4 TOO LOW TERRAIN GPWS
R 4 TOO LOW GEAR GPWS
R 4 TOO LOW FLAPS GPWS
R 5 GLIDE SLOPE GPWS
R TAD CAUTION TERRAIN GPWS
R TAD TERRAIN TERRAIN PULL UP PULL UP
R TCF TOO LOW TERRAIN GPWS
R Each of these alerts inhibits the automatic call out.
R
EFF :
001-050, 053-099, 34-48-00
Page A63
Config-2 Feb 01/09
TAI
R **ON A/C 053-099,
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-222, 301-306,
34-48-00
Page A64
Config-2 Feb 01/09
TAI
R MODE AURAL ALERTS VISUAL ALERTS
R 1 SINK RATE GPWS
R 1 PULL UP PULL UP
R 2 TERRAIN GPWS
R 2 TERRAIN TERRAIN GPWS
R 2 PULL UP PULL UP
R 3 DONT SINK DONT SINK GPWS
R 4 TOO LOW TERRAIN GPWS
R 4 TOO LOW GEAR GPWS
R 4 TOO LOW FLAPS GPWS
R 5 GLIDE SLOPE GPWS
R TAD TERRAIN AHEAD GPWS
R TAD TERRAIN AHEAD PULL UP PULL UP
R TCF TOO LOW TERRAIN GPWS
R Each of these alerts inhibits the automatic call out.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-306, 308-399, 401-499,
34-48-00
Page A65
Config-2 Feb 01/09
TAI
**ON A/C ALL
(3) Inhibitions
(a) Pressing the EMER CANC key on the ECAM control panel (aural alert
only).
(c) Pressing the G/S MODE pushbutton switch on the overhead panel for
Mode 5 (glide slope) visual and aural alert (permanent
inhibition).
(d) Pressing the SYS pushbutton switch on the overhead panel for
inhibition of GPWS Modes 1 to 5 (visual and aural alerts).
(e) Pressing the TERR pushbutton switch on the overhead panel for
inhibition of TAD and TCF functions (visual and aural alerts).
(4) Faults which prevent normal Enhanced GPWC operation are stored in the
BITE memory. They can be read on the MCDU.
EFF :
ALL 34-48-00
Page A66
Config-2 Nov 01/08
TAI
R **ON A/C 053-099, 201-203, 211-212, 215-215, 218-222, 301-306,
(3) Inhibitions
(Ref. Fig. 010)
(a) Pressing the EMER CANC key on the ECAM control panel (aural alert
only).
(c) Pressing the G/S MODE pushbutton switch on the overhead panel for
Mode 5 (glide slope) visual and aural alert (permanent
inhibition).
(d) Pressing the SYS pushbutton switch on the overhead panel for
inhibition of GPWS Modes 1 to 5 (visual and aural alerts).
(e) Pressing the TERR pushbutton switch on the overhead panel for
inhibition of TAD and TCF functions (visual and aural alerts).
(4) Faults which prevent normal Enhanced GPWC operation are stored in the
BITE memory. They can be read on the MCDU.
EFF :
ALL 34-48-00
Page A67
Config-2 Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-222, 301-306,
(a) Mode 1 provides the pilot with an alert/warning for high descent
rates into terrain. The pilot also receives a timely alert for
rapidly building sink rates near the runway when landing. The
figure shows the outer and inner boundaries whose penetration
triggers the alert/warnings.
(b) The outer boundary is a straight line which has an equation of:
(d) The penetration of this outer boundary activates the GPWS legends
and produces the voice warning SINK RATE repeated twice, then
remains silent unless the excessive descent rate condition
degrades by approximately 20 per cent.
(f) Both boundaries are cut off at the top by a radio altitude of
2450 ft. The lower is cut off at 10 ft. A delay equivalent to 0.8
seconds is included in the upper function to minimize the
warnings caused by the momentary boundary penetration.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page A68
Config-2 Nov 01/08
TAI
Enhanced GPWS - Excessive Rate of Descent
Figure 011
R
EFF :
ALL 34-48-00
Page A69
Config-2 May 01/08
TAI
(g) Both boundaries can be biased to the right at certain airports
through envelope modulation to minimize nuisance warnings.
(a) Mode 1 provides the pilot with an alert/warning for high descent
rates into terrain. The pilot also receives a timely alert for
rapidly building sink rates near the runway when landing. The
figure shows the outer and inner boundaries whose penetration
triggers the alert/warnings.
(b) The outer boundary is a straight line which has an equation of:
R
EFF :
ALL 34-48-00
Page A70
Config-2 May 01/08
TAI
The equation which describes the upper line is:
(f) Both boundaries are cut off at the top by a radio altitude of
2450 ft. The lower is cut off at 10 ft. A delay equivalent to 0.8
seconds is included in the upper function to minimize the
warnings caused by the momentary boundary penetration.
(a) Mode 2 provides a warning based on the radio altitude between the
aircraft and the ground and on how rapidly the radio altitude
decreases.
The barometric altitude of the aircraft is not important for the
initiation of this warning.
(c) This mode has two areas of application that are generally
referred to as Mode 2A and Mode 2B. Mode 2A is applied when the
landing flaps are not down and the aircraft is not in the glide
slope beam. Mode 2B requires that the landing flaps be down or
that the aircraft be in the glide slope beam within +/- 2 dots of
deviation during an ILS approach. The figure shows the warning
boundary for Mode 2A (landing flaps up). The closure rate is the
computed change in the radio altitude between the aircraft and
the ground. It is considered positive when the altitude
decreases.
The lower sloped line has an equation of:
R
EFF :
ALL 34-48-00
Page A71
Config-2 May 01/08
TAI
Enhanced GPWS - Terrain Closure Rate - Mode
Figure 012
EFF :
ALL 34-48-00
Page A72
Config-2 May 01/08
R
TAI
(d) The normal upper limit of the boundary is horizontal at 1650 ft.
radio altitude due to a computed maximum closure rate limit of
5733 FPM. As the airspeed increases from 220 Kts up to 310 Kts,
the maximum rate limit is linearly increased to 9800 FPM. This
allows the upper boundary to also linearly increase up to 2450
ft.
The upper boundary is limited at certain airports to reduce the
warning sensitivity and minimize the nuisance warnings.
(e) Upon penetration of the boundary, either on the slope or from the
top, the PULL UP legends come on and the voice message is TERRAIN
TERRAIN.
If the boundary penetration lasts beyond these two TERRAIN
messages, approximately 1 second, then the warning switches to
PULL UP repeated continuously until the boundary is departed.
When the Mode 2A envelope is exited, after having been violated
for more than 3 seconds, an altitude gain feature is
automatically activated. First the altitude at this instant is
sampled and stored. The PULL UP legends remain on and the voice
message is TERRAIN. After three hundred feet of altitude are
gained from the stored value, or 45 seconds have elapsed from the
point where the PULL UP envelope was exited, the PULL UP legends
and voice stop. If another boundary penetration occurs during
this altitude gain time, and it lasts long enough to restart the
PULL UP warning plus 3 seconds, then the whole process begins
again with a new reference altitude for the 300 ft. after
boundary separation.
In this manner the aircraft is directed up and over the terrain
to a safer altitude.
EFF :
ALL 34-48-00
Page A73
Config-2 Nov 01/08
TAI
(g) Mode 2B is also selected when the aircraft is performing an ILS
approach and the glide slope and localizer deviations are less
than +/- 2 dots. However, the warning envelope is slightly
different from the flaps down case in that the lower boundary is
controlled only as a function of radio altitude, having a
constant lower cutoff of 30 ft. above ground level. When the
flaps are selected to landing configuration in the ILS beams, the
lower boundary is activated, (Mode 2B inhibit).
(h) When the envelope boundary conditions for Mode 2B are violated,
the PULL UP legends come on, and the voice message is repeated
until the boundary is exited. If the gear or the flaps are up,
then the message is TERRAIN TERRAIN followed by PULL UP if the
condition persists. If both gear and flaps are in the landing
configuration, the message is TERRAIN.
(e) Upon penetration of the boundary, either on the slope or from the
top, the GPWS legends come on and the voice message is TERRAIN
TERRAIN.
If the boundary penetration lasts beyond these two TERRAIN
messages, approximately 1 second, then the warning switches to
PULL UP repeated continuously until the boundary is departed.
When the Mode 2A envelope is exited, after having been violated
for more than 3 seconds, an altitude gain feature is
automatically activated. First the altitude at this instant is
sampled and stored. The GPWS legends remain on and the voice
message is TERRAIN. After three hundred feet of altitude are
gained from the stored value, or 45 seconds have elapsed from the
point where the PULL UP envelope was exited, the GPWS legends and
voice stop. If another boundary penetration occurs during this
altitude gain time, and it lasts long enough to restart the PULL
UP warning plus 3 seconds, then the whole process begins again
with a new reference altitude for the 300 ft. after boundary
separation.
In this manner the aircraft is directed up and over the terrain
to a safer altitude.
EFF :
ALL 34-48-00
Page A74
Config-2 Nov 01/08
TAI
(g) Mode 2B is also selected when the aircraft is performing an ILS
approach and the glide slope and localizer deviations are less
than +/- 2 dots. However, the warning envelope is slightly
different from the flaps down case in that the lower boundary is
controlled only as a function of radio altitude, having a
constant lower cutoff of 30 ft. above ground level. When the
flaps are selected to landing configuration in the ILS beams, the
lower boundary is activated, (Mode 2B inhibit).
(h) When the envelope boundary conditions for Mode 2B are violated,
the GPWS legends come on, and the voice message is repeated until
the boundary is exited. If the gear or the flaps are up, then the
message is TERRAIN TERRAIN followed by PULL UP if the condition
persists. If both gear and flaps are in the landing
configuration, the message is TERRAIN.
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-229, 301-311, 401-404,
34-48-00
Page A75
Config-2 Nov 01/08
TAI
Enhanced GPWS - Mode 2 with Geometric altitude
Figure 013
R
EFF : 053-099, 211-212, 215-215, 218-229,
301-311, 401-404,
34-48-00
Page A76
Config-2 Nov 01/08
TAI
R **ON A/C 053-099, 201-203, 211-212, 215-215, 218-299, 301-399, 401-499,
EFF :
ALL 34-48-00
Page A77
Config-2 Feb 01/09
TAI
Enhanced GPWS - Mode 2 with Geometric altitude
Figure 013A
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-48-00
Page A78
Config-2 Feb 01/09
TAI
Enhanced GPWS - Descent After Takeoff
Figure 014
EFF :
ALL 34-48-00
Page A79
Config-2 May 01/08
R
TAI
(c) Inertially compensated air data signals are used when possible.
IVS is used when valid data is available and barometric altitude
rate is used only when valid IVS is not available and the
internal computed inertial data is not valid. The Mode 3 warning
envelopes are inhibited close to the ground.
(a) Mode 4 generates three types of voice warnings based on the radio
altitude, computed airspeed, and aircraft configuration, commonly
referred to as Modes 4A, 4B and 4C.
Mode 4A is active during cruise and approach with gear and flaps
not in landing configuration (conf 3 or full), the voice message
is TOO LOW GEAR.
EFF :
ALL 34-48-00
Page A80
Config-2 Nov 01/08
TAI
Mode 4B is active in cruise and approach, with either gear or
flaps in landing configuration.
The upper boundary of the mode 4A and 4B envelope depends on the
enhanced mo des. When TCF is enabled and TAD in high integrity,
mode 4A upper boundary is maintained at 500ft for all airspeed
and mode 4B upper boundary is maintained at 245ft for all
airspeed.
All mode 4A/4B alerts are disabled when the aircraft is in full
landing configuration.
The equation for the sloped portion of the warning curve is:
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-229, 301-311, 401-404,
34-48-00
Page A81
Config-2 Feb 01/09
TAI
Enhanced GPWS - Unsafe Terrain Clearance - Mode
Figure 015 (SHEET 1)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-307,
34-48-00
Page A82
Config-2 Nov 01/08
TAI
Enhanced GPWS - Unsafe Terrain Clearance - Mode
Figure 015 (SHEET 2)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-307,
34-48-00
Page A83
Config-2 Nov 01/08
TAI
Enhanced GPWS - Unsafe Terrain Clearance - Mode
Figure 015A (SHEET 1)
R
EFF :
ALL 34-48-00
Page A84
Config-2 May 01/08
TAI
Enhanced GPWS - Unsafe Terrain Clearance - Mode
Figure 015A (SHEET 2)
EFF :
ALL 34-48-00
Page A85
Config-2 May 01/08
R
TAI
A simplified example illustrates this operation. First assume the
radio altitude increase rapidly from 0ft to 400ft. The filter
begins charging to 75 per cent of 400ft or 300ft. In 20 seconds,
the filter has charged up to approximately 220ft. Now if the
radio altitude decreases so that 75 per cent of this value
results in something less than 220ft (i.e., approximately 295ft
or less), the filter remains at a value of 220ft . Further
reductions in radio altitude below 220ft result in the TOO LOW
TERRAIN warning. This warning is provided to prevent inadvertent
controlled flight into the ground during takeoff climb into
terrain that produces insufficient closure rate for a Mode 2
warning. After takeoff, and mode change over from Takeoff to
Cruise or Approach, then Mode 4A and 4B provide this protection.
The basic audio de-clutter feature applies a ratched function to
the Mode 4C voice warning which is equivalent to the ratcheting
voice message described above. Once the message is given, the
envelope is biased down by 20 per cent and further warnings are
held off until this additional 20 per cent radio altitude is
lost. The lamp is not affected and remains on until the terrain
clearance problem is rectified.
(b) The Mode 4A/4B maximum altitude is lowered from 1000 to 800 ft.
of radio altitude when an overflight is detected. An overflight
can be detected by sensing the sudden change in radio altitude
(-2200ft/s). The 800 ft limit is maintained for 60 seconds after
an overflight to ensure that a nuisance warning is not issued.
(c) When the landing gear or flaps are lowered, the upper boundary
decreases to 245 ft. To maintain the same airspeed expansion
function up to 1000 ft. nominal at 250 Kts, the lower level
corner is at 159 Kts.
Penetration below 159 Kts results in TOO LOW GEAR messages with
gear up or TOO LOW FLAPS message with gear down and flaps not in
landing configuration, while above 159 Kts the message is TOO LOW
TERRAIN.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-229, 301-311, 401-404,
34-48-00
Page A86
Config-2 Nov 01/08
TAI
(e) The gear-down logic requirement for Mode 5is deleted at certains
airports.
(b) The standard upper boundary for Mode 4A is at 500 ft. radio
altitude. Below 190 kts, if the aircraft penetrates this boundary
with the gear still up and flap not in landing configuration, the
voice message is TOO LOW GEAR.
R
EFF :
ALL 34-48-00
Page A87
Config-2 Feb 01/09
TAI
Above 190 kts :
- if flaps are not in landing configuration and TCF enabled or
TAD in high integrity (A/C position and geometric altitude have
a high accuracy), the upper boundary stays constant to a value
of 500 ft. radio altitude.
Penetrating this airspeed expanded boundary produces a TOO LOW
TERRAIN voice message.
(c) The standard upper boundary for Mode 4B is at 245 ft. radio
altiude. Penetration below 159 kts results in TOO LOW GEAR voice
message with gear up, or TOO LOW FLAPS message with gear down and
flaps not in Landing configuration
Above 159 kts :
R
EFF :
ALL 34-48-00
Page A88
Config-2 Feb 01/09
TAI
- if landing gear is up and flaps are down, the voice message is
TOO LOW GEAR. The upper boundary stays constant to a value of
245 ft.
R
EFF :
ALL 34-48-00
Page A89
Config-2 Feb 01/09
TAI
R **ON A/C ALL
(d) The Mode 4A and 4B maximum altitudes are reduced under different
circumstances to help reduce nuisance alerts.
First, through Envelope Modulation, lower maximums are used at
certain airports where operational procedures and terrain
characteristics may result in potential nuisance warnings.
Secondly, the Mode 4 maximum altitude is reduced from 1000 ft. to
800 ft. radio altitude if an overflight is detected. An
overflight is detected by sensing sudden changes in radio
altitude.
Current holding patterns can allow a 1000 ft. separation between
aircraft. Due to barometric altimetry errors, the actual
separation can be somewhat less than 1000 ft. If the radio
altitude rate of change is greater than or equal to -2200 ft. per
second, then the Mode 4 maximum altitude is reduced to 800 ft.
for 60 seconds following the excessive rate detection.
R
EFF :
ALL 34-48-00
Page A90
Config-2 Feb 01/09
TAI
takeoff to cruise and approach, then Modes 4A and 4B provide this
protection.
The basic audio declutter feature applies a ratchet function to
the Mode 4 aural alerts which are similar to the Mode 3
ratcheting alert/warning. Once the alert/warning is provided, the
envelope is biased down by 20 percent and further alerts are held
off until this additional 20 percent radio altitude is lost. The
lamp is not affected and remains on until the radio altitude
becomes greater than the indication on the curves.
(a) Mode 5 provides two levels of warning when the aircraft flight
path descends below the glide slope beam on front course ILS
approaches.
The upper limit of 1000 ft. nominal allows the capture of the
beam before enabling this mode. Higher upper limits are used at
certain airports to increase the warning envelope. The deviation
boundaries are shown in dots below the beam where one dot equals
0.0875 DDM = 0,36 degree. The first warning occurs whenever the
aircraft is more than 1.3 dots below the beam. It is called a
soft glide slope warning because the volume level of the GLIDE
SLOPE warning is approximately one half (- 6 db) that of the
other warnings.
A second warning boundary occurs below 300 ft. radio altitude and
more than 2 dots below the beam. It is called loud glide slope
because the volume level is increased to that of the other
warnings.
(b) Both boundaries allow additional deviation below 150 ft. of radio
altitude to allow for normal beam variations near the threshold.
(c) The basic audio de-clutter feature provides GLIDE SLOPE message
logic which suppresses the aural alert after one message has been
given. Follow-on alerts are only allowed when the aircraft
descends lower on the glide slope beam by approximately 20 per
cent. The alert lamp remains on until the excessive FLY UP
condition has been corrected. The aural alerts are provided
continuously once the aircraft exceeds 2 dots FLY UP. Below 300
ft. AGL the messages speed up as altitude is lowered or deviation
is increased. Actual time between GLIDE SLOPE messages for these
conditions is controlled by the equation:
R
EFF :
ALL 34-48-00
Page A91
Config-2 May 01/08
TAI
Enhanced GPWS - Descent Below Glide Slope
Figure 016
EFF :
ALL 34-48-00
Page A92
Config-2 May 01/08
R
TAI
RADIO ALTITUDE (FT.)
PAUSE(SEC) = --------------------------------- X 0.0067
GLIDE SLOPE DEVIATION (DOTS FLY UP)
(d) The GLIDE SLOPE warning can be manually cancelled by the crew.
This can be done any time below 2000 ft. nominal radio altitude.
Cancel can be reset by ascending above 2000 ft. nominal, or
descending below 30 ft.
(e) The change from constant deviation to a slope below 150 ft. radio
altitude is shown along with the constant separation 0.7 dot
between the two boundaries. A delay of approximately 0.8 second
is inserted between the warning output and the enabling logic
during a warning condition. The delay also turns off the warning
output when two successive samples show a loss of the enabling
logic. The repetition rate of the GLIDE SLOPE message is
controlled by the radio altitude and the glide slope deviation as
shown in the equation above.
C. Envelope Modulation
(1) Background
During the past 20 years, experience with GPWS has shown that normal
approaches to certain airports can be incompatible with the normal
warning envelopes and signal filtering.
The envelope modulation feature provides improved alert/warning
protection at some key locations throughout the world, while
improving nuisance margins at others. This is made possible with the
use of navigational signals from modern inertially based navigation
EFF :
ALL 34-48-00
Page A93
Config-2 Feb 01/09
TAI
equipment. This feature utilizes updated flight management system
navigational signals.
C. Envelope Modulation
(1) Background
During the past 20 years, experience with GPWS has shown that normal
approaches to certain airports can be incompatible with the normal
warning envelopes and signal filtering.
The envelope modulation feature provides improved alert/warning
protection at some key locations throughout the world, while
improving nuisance margins at others. This is made possible with the
use of navigational signals from GPS/IRS/FMS navigation equipement.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-48-00
Page A94
Config-2 Nov 01/08
TAI
What is needed is the ability to recognize when the aircraft is
approaching one of these airports and then adjust the warning
criteria to suit the particular approach.
The availability of accurate, low drift, latitude and longitude
information from the latest generation inertial navigation equipment
now makes individual airport recognition possible. After recognizing
the approach to or departure from one of these airports, it is also
important to verify the aircraft is at a reasonable altitude before
desensitizing any warning criteria. If the aircraft is already low,
further warning reduction is not desirable. This requires the use of
corrected altitude signals.
R
EFF :
ALL 34-48-00
Page A95
Config-2 May 01/08
TAI
A different type of case is the inadequate warning protection during
ILS approaches because Mode 5 is limited to less than 1000 ft. radio
altitude. There are airports located at a significantly higher
altitude than the surrounding terrain. In some instances this
difference is over 1000 ft., thus requiring the aircraft to be below
the runway elevation before a Mode 5 warning is possible during most
of the approach.
Until recently there has been no reasonable way to accomodate these
few special cases without compromising the Enhanced GPWC at all other
airports.
What is needed is the ability to recognize when the aircraft is
approaching one of these airports and then adjust the warning
criteria to suit the particular approach.
The availability of accurate, low drift, latitude and longitude
information from the latest generation inertial navigation equipment
now makes individual airport recognition possible. After recognizing
the approach to or departure from one of these airports, it is also
important to verify the aircraft is at a reasonable altitude before
desensitizing any warning criteria. If the aircraft is already low,
further warning reduction is not desirable. This requires the use of
corrected altitude signals.
R
EFF :
ALL 34-48-00
Page A96
Config-2 May 01/08
TAI
R **ON A/C 211-212, 215-215, 218-229, 301-311, 401-404,
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-229, 301-311, 401-404,
34-48-00
Page A97
Config-2 Nov 01/08
TAI
The FMGC is the preferred source for latitude and longitude data
because these data were corrected for the normal drift of the ADIRU
basic latitude and longitude data.
EFF :
ALL 34-48-00
Page A98
Config-2 Nov 01/08
TAI
**ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-222, 301-307,
- expand the maximum Mode 5 radio altitude level where a warning can
begin. This allows GLIDE SLOPE warnings for higher radio altitudes.
The gear down requirement is also removed during warning expansion,
to allow gear up warnings.
The actual data for each of the established areas is in tables stored
in the Enhanced GPWC non-volatile memory. This data can be for either
a snapshot area or an envelope modulation area. In fact, these
areas can actually overlap since the envelope modulation is not
performed until the snapshot conditions have been verified. Every
snapshot has an associated envelope modulation area, but not every
envelope modulation area has an associated snapshot area. This is
because some locations use glide slope instead of the snapshot
feature as a cross check on corrected altitude data. All of the data
extracted for each location is used to form a unique key which
establishes the aircraft position, orientation and altitude.
Stored data for latitude, longitude, terrain elevation, expected
elevation tolerance, minimum expected radio altitude, heading (track)
and maximum allowable time to reach the envelope modulation area are
compared to real time computed values for these parameters in order
to set snapshot latch. This latch is intentionally stored in
volatile RAM memory and cleared during power loss recovery. The
associated signal validities are used to establish signal integrity
prior to setting the snapshot latch. The maximum time term is used
to clear the snapshot latch once this time has expired unless the
envelope modulation conditions are satisfied first.
Logic is required to satisfy one or more of the envelope modulation
keys. In each case, if the key is required, the associated
conditions are monitored.
The following is a summary of the envelope modulation, and snapshot
keys:
ENVELOPE MODULATION KEYS
EFF :
ALL 34-48-00
Page A99
Config-2 Feb 01/09
TAI
-----------------------------------------------------------------------------
| SELECTED KEY | DESCRIPTION |
|------------------|--------------------------------------------------------|
| ENVELOPE | REQUIRES VALID LATITUDE AND LONGITUDE TO BE WITHIN |
| MODULATION AREA | DEFINED AREA |
|------------------|--------------------------------------------------------|
| G/S SELECTED | REQUIRES VALID GLIDE SLOPE WITHIN +/- 2 DOTS |
|------------------|--------------------------------------------------------|
| LOC SELECTED | REQUIRES VALID LOCALIZER WITHIN +/- 2 DOTS |
|------------------|--------------------------------------------------------|
| HDG SELECTED | REQUIRES VALID HEADING WITHIN +/- 30 DEG OF SELECTED |
| | VALUE |
|------------------|--------------------------------------------------------|
| CRS SELECTED | REQUIRES VALID RUNWAY COURSE WITHIN +/- 10 DEG OF |
| | SELECTED VALUE |
| | If the aircraft installation does not provide runway |
| | course (or selected heading) then this key is not |
| | required. |
|------------------|--------------------------------------------------------|
| MIN ALTITUDE | REQUIRES VALID CORRECTED ALTITUDE (QFE OR QNH) TO BE |
| SELECTED | GREATER THAN SELECTED VALUE |
|------------------|--------------------------------------------------------|
| SNAPSHOT SELECTED| REQUIRES SNAPSHOT DETECTED |
-----------------------------------------------------------------------------
SNAPSHOT KEYS
-----------------------------------------------------------------------------
| SELECTED KEY | DESCRIPTION |
|------------------|--------------------------------------------------------|
| SNAPSHOT AREA | REQUIRES VALID LATITUDE AND LONGITUDE TO BE WITHIN |
| | DEFINED AREA |
|------------------|--------------------------------------------------------|
| HDG SELECTED | REQUIRES VALID HEADING WITHIN +/- 30 DEG OF SELECTED |
| | VALUE |
|------------------|--------------------------------------------------------|
| MINIMUM RADIO | REQUIRES VALID RADIO ALTITUDE TO BE GREATER THAN |
| ALTITUDE | SELECTED VALUE |
|------------------|--------------------------------------------------------|
| TERRAIN ELEVATION| REQUIRES TERRAIN ELEVATION (QFE OR QNH) TO BE WITHIN |
| | A SPECIFIC TOLERANCE OF THE SELECTED VALUE |
|------------------|--------------------------------------------------------|
| MAXIMUM TIME | MAXIMUM TIME PERMITTED TO SATISFY ALL ENVELOPE |
| | MODULATION KEYS AFTER LEAVING THE SNAPSHOT |
|__________________|________________________________________________________|
R
EFF :
ALL 34-48-00
Page B0
Config-2 May 01/08
TAI
All of the keys, either by virtue of not being selected, or by
being selected and satisfied, are required to enable envelope
modulation. Envelope modulation parameters are either within the
selected values if the keys fit, or defaulted to normal values if
the keys do not fit. These parameters are used as inputs to the
warning modes and thereby provide the mechanism for envelope
modulation.
D. Enhanced Features
EFF :
ALL 34-48-00
Page B1
Config-2 Nov 01/08
TAI
Enhanced GPWS - Terrain Awareness Functions
Figure 017
R
EFF :
201-203, 34-48-00
Page B2
Config-2 May 01/08
TAI
Enhanced GPWS - Terrain Awareness Functions
Figure 017A
R
EFF : 001-050, 053-099, 211-212, 215-215,
218-299, 301-399, 401-499,
34-48-00
Page B3
Config-2 Nov 01/08
TAI
The Enhanced GPWS provides two external display outputs, each with
independent range-scaling control in the same fashion as a weather
radar on both NDs. Changes of range scaling to one ND do not affect
the other display. Each of these two independent outputs may be used
to drive more than one display.
1
_ Aircraft data inputs
Aircraft position latitude and longitude are required for
terrain awareness operation and are received from the Global
Positioning System (GPS). The Enhanced GPWS will use GPS and
corrected IRS as valid position sources, if the figures of
merit (FOM) of these sources exceed 0,5NM then FMS data will
be used. The terrain peration and a threat detection and
display processing are automatically disabled in some
particular conditions. This is indicated to the flight crew by
an ECAM memo (TERR STBY).
(Ref. Fig. 010)
EFF :
ALL 34-48-00
Page B4
Config-2 Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-225, 301-307,
1
_ Aircraft data inputs
Aircraft position latitude and longitude are required for
terrain awareness operation and are received from the Global
Positioning System (GPS). The Enhanced GPWS will use GPS and
corrected IRS as valid position sources, if the figures of
merit (FOM) of these sources exceed 0,5NM then FMS data will
be used. The terrain peration and a threat detection and
display processing are automatically disabled in some
particular conditions. This is indicated to the flight crew by
an ECAM memo (TERR STBY).
(Ref. Fig. 010)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-229, 301-311, 401-404,
34-48-00
Page B5
Config-2 Nov 01/08
TAI
Other aircraft inputs include aircraft heading (from the IR),
roll attitude (from IR) and flight path angle (Gamma, derived
by the Enhanced GPWC).
Aircraft altitude for the Terrain Awareness functions is also
computed from pressure altitude and SAT received from the air
data portion of the ADIRU, altitude from the Global
Positioning System (if available), and height above ground
provided by the Radio Altimeter (RA).
When GPS parameters are available via a specific Pin-Program,
and from GPIRS, the Enhanced GPWS computes a Geometric
Altitude.
1
_ Aircraft data inputs
The Enhanced GPWS will use GPS, corrected IRS and FMS as valid
position sources and will inhibit itself automatically if all
the figures of merit (FOM) for these sources exceed the
current Enhanced GPWS required accuracy.
The terrain threat detection and display processing are
automatically disabled. This is indicated to the flight crew
by an ECAM memo (TERR STBY).
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-48-00
Page B6
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-211, 215-215, 219-299, 301-302, 306-309, 312-399,
R 401-499,
R Post SB 34-1287 For A/C 211-211,215-215,219-225,301-302,306-307,
R Post SB 34-1351 For A/C 201-203,211-211,215-215,219-225,301-302,306-307,
R Post SB 34-1352 For A/C 201-203,211-211,215-215,219-229,301-302,306-309,
R 401-404,
2
_ Control Inputs
Installations provide discrete terrain display select
pushbutton switches (TERR ON ND) in the cockpit for each
display. These are momentary-action pushbutton switches that
are processed by the Enhanced GPWS input processing and signal
selection block as input to display control logic.
Additionally, for aircraft with predictive windshear radar
capability (if WR/PWS installed), a windshear override boolean
is computed using alert level bits from label 077 on WXR
hazard bus for the display control logic.
EFF :
ALL 34-48-00
Page B7
Config-2 Nov 01/08
TAI
**ON A/C 001-050, 053-099,
EFF :
ALL 34-48-00
Page B8
Config-2 Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-228, 301-309,
R 401-401,
1
_ Terrain Surface Data
Local terrain processing of topographic surface data updates a
set of digital elevation matrix overlays that are positioned
with respect to aircraft position. Each matrix element
contains the highest terrain altitude with respect to mean sea
level in that element area. Elements where terrain data are
not available are marked invalid. These unknown data are
displayed in magenta low density on ND whatever the altitude.
2
_ Obstacle Data
In addition to terrain surface data, provisions are made for
future use of an obstacle data base providing obstacle data in
the vicinity of major airports. Local terrain processing will
update a dedicated overlay within the digital elevation matrix
overlays with local obstacle altitude data.
3
_ Nearest Runway Data
Data for the nearest runway are extracted and processed for
use by the terrain threat detection and display processing
functions. Data are extracted from the same airport data base
used by the Terrain Clearance Floor functions (Ref. para.
D.(2)). This data base contains data on all hard-surface
runways 3500 ft. or more in length with published coordinates.
The contents of the data base are processed by the local
terrain processing into nearest runway center position,
nearest runway threshold position, and nearest runway altitude
for use by the Enhanced GPWS. These data are updated when the
terrain threat detection and display processing functions are
performed.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-401,
34-48-00
Page B9
Config-2 Nov 01/08
TAI
R **ON A/C ALL
1
_ Terrain Surface Data
Local terrain processing of topographic surface data updates a
set of digital elevation matrix overlays that are positioned
with respect to aircraft position. Each matrix element
contains the highest terrain altitude with respect to mean sea
level in that element area. Elements where terrain data are
not available are marked invalid. These unknown data are
displayed in magenta low density on ND whatever the altitude.
2
_ Obstacle Data
In addition to terrain surface data, the terrain database
contains obstacle data. The obstacle data are displayed as
terrain data (same coloring scheme) and cause visual
indications of warning and caution alerts as terrain. The
current obstacle database is obtained from N.O.A.A. (National
Oceanic and Atmospheric Administration). It includes obtacles
in the United States and part of Canada, Mexico, the Bahamas
and Europe. Obstacle alerting and display is activated via a
specific programming pin.
3
_ Nearest Runway Data
Data for the nearest runway are extracted and processed for
use by the terrain threat detection and display processing
functions. Data are extracted from the same airport data base
used by the Terrain Clearance Floor functions (Ref. para.
D.(2)). This data base contains data on all hard-surface
runways 3500 ft. or more in length with published coordinates.
The contents of the data base are processed by the local
terrain processing into nearest runway center position,
nearest runway threshold position, and nearest runway altitude
for use by the Enhanced GPWS. These data are updated when the
R
EFF :
ALL 34-48-00
Page B10
Config-2 Feb 01/09
TAI
terrain threat detection and display processing functions are
performed.
1
_ Terrain Caution and Warning Envelopes
(Ref. Fig. 018)
a
_ Caution Altitude Floor
The caution altitude floor (or terrain floor) is computed
as a function of aircraft altitude with respect to nearest
runway altitude and range to the nearest runway threshold
position. This parameter represents a distance below the
aircraft. The relationship to the nearest runway threshold
location prevents undesired alerts when the aircraft is
taking off or landing at an airport. The system is
compatible with terrain clearances allowed for by
regulatory approach and departure design criteria.
b
_ Caution Look Ahead Distance
The caution look ahead distance is computed from aircraft
ground speed and turn rate to provide an advanced caution
with adequate time for the crew to react safely. Depending
on the situation this distance roughly corresponds to
between 40 and 60 seconds for advance alerting.
c
_ Warning Altitude Floor
The warning altitude floor is set to a fraction of the
caution altitude floor, as illustrated in the upper part of
this illustration.
(Ref. Fig. 018)
R
EFF :
ALL 34-48-00
Page B11
Config-2 May 01/08
TAI
Enhanced GPWS - Terrain Detection Envelope
Figure 018
R
EFF :
ALL 34-48-00
Page B12
Config-2 May 01/08
TAI
The warning altitude floor is computed as a function of
aircraft altitude with respect to nearest runway altitude
and range to the nearest runway threshold position. This
parameter represents a distance below the aircraft. The
relationship to the nearest runway threshold location
prevents undesired alerts when the aircraft is taking off
or landing at an airport.
d
_ Warning Look Ahead Distance
The warning look ahead distance is a fraction of the
caution look ahead distance (computed from aircraft ground
speed and turn rate) to provide an advanced warning with
adequate time for the crew to react safely.
e
_ Cut off altitude around airport
The Enhanced GPWS look ahead algorithms as well as the
terrain display ignores all terrain and obstacles below a
calculated altitude define as the Absolute Cut Off Altitude
(ACOA). ACOA de-clutters terrain around airport, especially
during final approach when the aircraft normally approaches
the ground. It also has the effect to clearly showing the
runway approach and departure routes on the terrain display
because the valley floors will typically be black.
Cut off altitude value depends on the destination runway
and is comprised between 200ft and 400ft.
EFF :
ALL 34-48-00
Page B13
Config-2 Feb 01/09
TAI
Enhanced GPWS - Peaks Terrain background display legend
Figure 019
R
EFF :
ALL 34-48-00
Page B14
Config-2 Feb 01/09
TAI
Enhanced GPWS - Terrain background display on ND
Figure 020
R
EFF :
229-229, 310-311, 402-404, 34-48-00
Page B15
Config-2 Nov 01/08
TAI
The background terrain is depicted as variable density dot
patterns in green, yellow or red. The density and color vary
according to how close the terrain or obstacle in relation to
aircraft altitude. Additionally, the display of terrain based on
absolute terrain elevation is provided if the optional Peaks mode
is enabled. Terrain and obstacle alerts are depicted by
displaying the threatening terrain as solid yellow and/or red.
The terrain display algorithms process the set of digital
elevation matrix overlays into a matching set of display matrix
overlays and passed to the radar display output processor. The
display matrix overlays hold display attributes rather than
altitude for each matrix element. These attributes are computed
for the background and terrain threat areas and kept small to
reduce memory requirements and transfer time to the radar display
output processor. The aircraft position and aircraft heading are
used at the radar display output processor to extract the
radar-like sweeping image ahead of the aircraft from the display
overlays.
Each element of the output display matrix overlays holds a single
display attribute byte with fields for the colors, patterns, and
symbols shown in the following table:
-------------------------------------------------------------------------------
| Color | Threat |
-------------------------------------------------------------------------------
| Solid Red | Warning terrain (approximately 30 seconds from |
| | impact) |
|---------------------|-------------------------------------------------------|
| Solid Yellow | Caution terrain (approximately 60 seconds from |
| | impact) |
|---------------------|-------------------------------------------------------|
| High Density Red | Terrain that is more than 2000 ft. above aircraft |
| | altitude |
|---------------------|-------------------------------------------------------|
| High Density | Terrain that is between 1000 ft. and 2000 ft. above |
| Yellow | aircraft altitude |
|---------------------|-------------------------------------------------------|
| Medium Density | Terrain that is 500 ft. (250 ft. with gear down) |
| Yellow | below to 1000 ft. above aircraft altitude |
|---------------------|-------------------------------------------------------|
| Solid Green | (Peaks only) Highest terrain not within 500 ft. |
| | (250 ft. with gear down) of aircraft altitude. |
| | Mainly appears with dotted yellow terrain when the |
| | aircraft altitude is within 500 ft. (250 ft. with |
| | gear down) of terrain. |
|---------------------|-------------------------------------------------------|
| Hight Density | Terrain that is 500 ft. (250 ft. with gear down) below|
R
EFF :
229-229, 310-311, 402-404, 34-48-00
Page B16
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| Color | Threat |
-------------------------------------------------------------------------------
| Green Dots (1) | to 1000 ft. below aircraft altitude. |
| |-------------------------------------------------------|
| | (Peaks only) Terrain that is the middle elevation band|
| | when there are no red or yellow terrain areas within |
| | range on the display. |
|---------------------|-------------------------------------------------------|
| Low Density | Terrain that is 1000 ft. to 2000 ft. below aircraft |
| Green Dots | altitude. |
| |-------------------------------------------------------|
| | (Peaks only) Terrain that is the middle elevation band|
| | when there are no red or yellow terrain areas within |
| | range on the display |
|---------------------|-------------------------------------------------------|
| Black | No close terrain (Ref. NOTE in para. D.(1)(d)1_) |
|---------------------|-------------------------------------------------------|
| Low Density | (Peaks only) Terrain elevation equal to 0 ft. MSL. |
| Cyan Dots | |
|---------------------|-------------------------------------------------------|
| Light Density | Unknown terrain |
| Magenta | |
-------------------------------------------------------------------------------
1
_ Background display (Option)
(Ref. Fig. 019)
There are two different background Terrain Awareness display
mode: standard and Peaks. For both modes the background
display is computed from the aircraft altitude with respect to
the terrain data in the digital elevation matrix overlays.
- Standard mode
Terrain is displayed using colors and shading patterns
corresponding to the vertical displacement between the
terrain elevation and the current aircraft altitude. Red and
yellow dot patterns indicate terrain near or above the
current altitude of the aircraft. Solid yellow and red
colors indicate caution and warning areas with respect to
the flight path of the aircraft.
High and low density green display patterns indicate terrain
that is below the aircraft and within 2000 ft. of the
aircraft altitude. Terrain more than 2000 ft. below the
aircraft is not displayed and the terrain display is
typically blank during the enroute portion of the flight.
- Peaks mode
The Peaks display option is available on Airbus aircraft
equipped with EIS 2 LCD displays. The Peaks terrain display
R
EFF :
229-229, 310-311, 402-404, 34-48-00
Page B17
Config-2 Nov 01/08
TAI
adds additional density patterns and level thresholds to the
standard mode display levels and patterns. These additional
levels are based on absolute terrain elevations in relation
to the range and distribution of terrain in the display
area. The Peaks display is thus a merged display
applicable to all phases of flight. At altitude safely above
all terrain for the display range chosen, the terrain is
displayed independent of aircraft altitude emphasizing the
highest and lowest elevations to provide increased
situational awareness. This increased awareness can be
particularly valuable to the flight crew in the event of an
unplanned descent or off-route deviation and for the purpose
of previewing terrain prior to descent.
The Peaks display includes a high green level to indicate
the highest non-threatening terrain. The standard lower
density green display patterns indicate mid and upper
terrain in the display area as well as terrain that is
within 2000 ft.of the aircraft. The red and yellow dot
patterns are unchanged and continue to indicate terrain that
is near or above the current altitude of the aircraft. Solid
yellow and red colors are also unchanged and continue to
indicate caution and warning areas in relation to the flight
path of the aircraft. Terrain identified as water (0 ft.
MSL) is displayed as cyan dots. The Peaks display is
prioritized such that higher level colors and densities
override lower color and densities for maximum situational
awareness of the most significant terrain in relation to the
altitude and flight path of the aircraft.
(Ref. Fig. 019)
With the Peaks display, two elevation numbers indicating the
highest and lowest terrain currently being displayed are
shown on the display. The elevation numbers indicate terrain
in hundred of feet above sea level (MSL). The terrain
elevation numbers are displayed with the highest terrain
number on top, and the lowest terrain number beneath it. The
highest terrain number is shown in the same color as the
highest terrain color pattern on the display, and the lowest
terrain number is shown in the color of the lowest terrain
color pattern shown on the display. A single elevation
number is displayed when the screen is all black or blue as
a result of flying over water or relatively flat terrain
where there is no appreciable difference in terrain
elevations. The elevation numbers on the display are an
additional indication that the terrain display is selected.
(Ref. Fig. 020)
R
EFF :
229-229, 310-311, 402-404, 34-48-00
Page B18
Config-2 Nov 01/08
TAI
2
_ Terrain and Obstacle caution alert (option)
(Ref. Fig. 021A)
When the conditions have been met to generate a terrain or
obstacle caution alert, a specific audio alert and light
output is triggered and the background image is enhanced to
highlight the terrain caution threats.
At the start of a terrain caution alert, the Terrain Awareness
function triggers the caution audio alert phrase TERRAIN
AHEAD, TERRAIN AHEAD. The phrase is repeated after seven
seconds if still within the terrain caution envelope. The
Terrain Awareness function respond to an obstacle caution
alert by triggering the obstacle caution audio alert phrase
OBSTACLE AHEAD, OBSTACLE AHEAD. The phrase is repeated after
seven seconds if still within the terrain caution envelope.
During a terrain caution alert or obstacle caution alert, the
GPWS legend of the PULL UP/GPWS pushbutton switches 4WZ and
5WZ is on.
During a terrain caution alert, areas where terrain violates
the terrain caution envelope along the aircraft track, and
within plus or minus 90 deg. of the aircraft track, are
painted with the caution color 100 per cent yellow.
During an obstacle caution alert areas where an obstacle
violates the terraincaution envelope along the aircraft track,
and within plus or minus 90 deg. of the aircraft track, are
displayed with the caution color yellow.
3
_ Terrain and obstacle warning alert (option)
(Ref. Fig. 021A)
When the conditions have been met to generate a terrain or
obstacle warning alert, a specific audio alert and light
output is triggered and the background image is enhanced to
highlight the terrain or obstacle caution and warning threats.
At the start of a terrain warning alert, the Terrain Awareness
function triggers the warning audio alert phrase TERRAIN
AHEAD, PULL UP. The phrase is repeated continuously while
within the terrain warning envelope. The Terrain Awareness
function responds to an obstacle warning alert by triggering
the obstacle warning audio alert OBSTACLE AHEAD, PULL UP. The
phrase is repeated continuously while within the terrain
warning envelope.
During a terrain or obstacle warning alert, the PULL UP legend
of the PULL UP/GPWS pushbutton switches 4WZ and 5WZ is on.
During a terrain warning alert, areas where terrain violates
the terrain warning envelope along the aircraft track, and
within plus or minus 90 deg. of the aircraft track, are
displayed with the warning color 100 per cent red.
R
EFF :
229-229, 310-311, 402-404, 34-48-00
Page B19
Config-2 Nov 01/08
TAI
Enhanced GPWS - Terrain background display on ND
Figure 020A
R
EFF :
ALL 34-48-00
Page B20
Config-2 Feb 01/09
TAI
Enhanced GPWS - Warning and Caution Display on ND
Figure 021
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-401,
34-48-00
Page B21
Config-2 Nov 01/08
TAI
Enhanced GPWS - Warning and Caution Display on ND (with EIS2)
Figure 021A
R
EFF :
ALL 34-48-00
Page B22
Config-2 Feb 01/09
TAI
NOTE : - Terrain is displayed on NDs if the ARC or ROSE mode
____
is selected on the FCU.
- When an alert (caution or warning) occurs and the FCU
mode is not a correct mode (ARC or ROSE), the message
TERR. CHANGE MODE is displayed on NDs.
- When an alert (caution or warning) occurs and the
range selected on the FCU is 160 or 320 NM the message
TERR. REDUCE RANGE is displayed on NDs.
R
EFF :
229-229, 310-311, 402-404, 34-48-00
Page B23
Config-2 Nov 01/08
TAI
The obstacle data is processed by the display processing function
in the same fashion as terrain is presented on the display as
terrain (coloring scheme), and causes visual indications of
warning and caution alerts like terrain.
-------------------------------------------------------------------------------
| Color | Threat |
-------------------------------------------------------------------------------
| Solid Red | Warning terrain (approximately 30 seconds from |
| | impact) |
|---------------------|-------------------------------------------------------|
| Solid Yellow | Caution terrain (approximately 60 seconds from |
| | impact) |
|---------------------|-------------------------------------------------------|
| High Density Red | Terrain that is more than 2000 ft. above aircraft |
| | altitude |
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 229-229, 301-306, 310-311,
34-48-00
Page B24
Config-2 Nov 01/08
402-404,
TAI
Enhanced GPWS - Terrain Background Display Legend
Figure 022
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-401,
34-48-00
Page B25
Config-2 Nov 01/08
TAI
Enhanced GPWS - Terrain Background Display on ND
Figure 023
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-401,
34-48-00
Page B26
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| Color | Threat |
-------------------------------------------------------------------------------
|---------------------|-------------------------------------------------------|
| High Density | Terrain that is between 1000 and 2000 ft. above |
| Yellow | aircraft altitude |
|---------------------|-------------------------------------------------------|
| Medium Density | Terrain that is 500 (250 with gear down) ft. below |
| Yellow | to 1000 ft. above aircraft altitude |
|---------------------|-------------------------------------------------------|
| Medium Density | Terrain that is 500 (250 with gear down) ft. below |
| Green | to 1000 ft. below aircraft altitude |
|---------------------|-------------------------------------------------------|
| Light Density Green | Terrain that is 1000 to 2000 ft. below aircraft |
| | altitude |
|---------------------|-------------------------------------------------------|
| Black | No close terrain (Ref. NOTE in para. D.(1)(d)1_) |
|---------------------|-------------------------------------------------------|
| Light Density | Unknown terrain |
| Magenta | |
-------------------------------------------------------------------------------
1
_ Background Display
(Ref. Fig. 023)
The background display is computed from the aircraft altitude
with respect to the terrain data in the digital elevation
matrix overlays. Where terrain data are available and
sufficiently close to the aircraft altitude, they are
presented in background color dot patterns reflecting the
projected separations shown in this illustration.
(Ref. Fig. 022)
Different dot density patterns and colors are used to
represent terrain altitude bands with respect to the aircraft.
Areas with no terrain data available are painted with the low
density magenta. Known terrain sufficiently below the aircraft
altitude is black.
2
_ Terrain Caution Alert
(Ref. Fig. 021)
When the conditions have been met to generate a terrain
caution alert, a specific audio alert and light output is
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page B27
Config-2 Nov 01/08
TAI
triggered and the background image is enhanced to highlight
the terrain caution threats.
At the start of a terrain caution alert, the terrain awareness
function triggers the caution audio alert phrase TERRAIN
AHEAD. The phrase is repeated after seven seconds if still
within the terrain caution envelope.
During a terrain caution alert, the GPWS legend of pushbutton
switches 4WZ and 5WZ is on.
During a terrain caution alert, areas where terrain violates
the terrain caution envelope along the aircraft track, and
within plus or minus 90 deg. of the aircraft track, are
painted with the caution color 100 per cent yellow.
3
_ Terrain Warning Alert
(Ref. Fig. 021)
When the conditions have been met to generate a terrain
warning alert, a specific audio alert and light output is
triggered and the background image is enhanced to highlight
the terrain caution and warning threats.
At the start of a terrain warning alert, the terrain awareness
function triggers the warning audio alert phrase TERRAIN
AHEAD, PULL UP. The phrase is repeated continuously while
within the terrain warning envelope.
During a terrain warning alert, the GPWS legend of pushbutton
switches 4WZ and 5WZ is on.
During a terrain warning alert, areas where terrain violates
the terrain warning envelope along the aircraft track, and
within plus or minus 90 deg. of the aircraft track, are
painted with the warning color 100 per cent red.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page B28
Config-2 Nov 01/08
TAI
respective area. Grid sets vary in resolution depending on
geographic location. Higher resolution grids are used around
airports. Lower resolution grids are used outside of airport
areas where aircraft altitude enroute makes hazardous conditions
unlikely and for which detailed terrain features are not
important to the flight crew.
Digital Elevation Models (DEM) are available for most of the
airports around the world today. In cases where the data are not
currently available, DEMs are generated in-house from available
topographic maps, sectional charts, and airline approach plates.
The process of acquiring, generating, assembling, and updating
the data base is governed by strict configuration controls to
ensure the highest level of data integrity. DEMs from external
sources are inputs to this process and are checked and formatted
for generation of the Enhanced GPWS terrain data base.
The global Enhanced GPWS terrain data base is organized in a
flexible manner. Using digital compression techniques, the
complete data base is stored in non-volatile memory within the
LRU. Updates and additions are easily accomplished by inserting a
single PCMCIA card in the card slot on the LRU front panel.
Status LEDs on the LRU front panel allow the operator to monitor
the data base load progress and completion.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-401,
34-48-00
Page B29
Config-2 Nov 01/08
TAI
background image is then enhanced to highlight related terrain
threats forward of the aircraft.
The background terrain is depicted as variable density dot
patterns in green, yellow or red. The density and color being a
function of how close the terrain is relative to aircraft
altitude. Terrain alerts are depicted by painting the threatening
terrain as solid yellow or red.
The set of digital elevation matrix overlays is processed by the
terrain display algorithms into a matching set of display matrix
overlays and passed to the radar display output processor. The
display matrix overlays hold display attributes rather than
altitude for each matrix element. These attributes are computed
for the background and terrain threat areas and kept small (one
byte) to reduce memory requirements and transfer time to the
radar display output processor. The aircraft position and
aircraft heading are used at the radar display output processor
to extract a specific sweeping image ahead of the aircraft from
the display overlays.
Each element of the output display matrix overlays holds a single
display attribute byte with fields for the colors, patterns, and
symbols shown in the following table:
-------------------------------------------------------------------------------
| Color | Threat |
-------------------------------------------------------------------------------
| Solid Red | Warning terrain (approximately 30 seconds from |
| | impact) |
|---------------------|-------------------------------------------------------|
| Solid Yellow | Caution terrain (approximately 60 seconds from |
| | impact) |
|---------------------|-------------------------------------------------------|
| High Density Red | Terrain that is more than 2000 ft. above aircraft |
| | altitude |
|---------------------|-------------------------------------------------------|
| High Density | Terrain that is between 1000 and 2000 ft. above |
| Yellow | aircraft altitude |
|---------------------|-------------------------------------------------------|
| Medium Density | Terrain that is 500 (250 with gear down) ft. below |
| Yellow | to 1000 ft. above aircraft altitude |
|---------------------|-------------------------------------------------------|
| Medium Density | Terrain that is 500 (250 with gear down) ft. below |
| Green | to 1000 ft. below aircraft altitude |
|---------------------|-------------------------------------------------------|
| Light Density Green | Terrain that is 1000 to 2000 ft. below aircraft |
| | altitude |
|---------------------|-------------------------------------------------------|
| Black | No close terrain (Ref. NOTE in para. D.(1)(d)1_) |
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-401,
34-48-00
Page B30
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| Color | Threat |
-------------------------------------------------------------------------------
|---------------------|-------------------------------------------------------|
| Light Density | Unknown terrain |
| Magenta | |
-------------------------------------------------------------------------------
1
_ Background Display
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-401,
34-48-00
Page B31
Config-2 Nov 01/08
TAI
2
_ Terrain Caution Alert
3
_ Terrain Warning Alert
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-401,
34-48-00
Page B32
Config-2 Nov 01/08
TAI
within plus or minus 90 deg. of the aircraft track, are
painted with the warning color 100 per cent red.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-401,
34-48-00
Page B33
Config-2 Nov 01/08
TAI
of obstacles that protrude above the Enhanced GPWS terrain
protection floors.
R
EFF :
ALL 34-48-00
Page B34
Config-2 Feb 01/09
TAI
display matrix overlays hold display attributes rather than
altitude for each matrix element. These attributes are computed
for the background and terrain threat areas and kept small to
reduce memory requirements and transfer time to the radar display
output processor. The aircraft position and aircraft heading are
used at the radar display output processor to extract the
radar-like sweeping image ahead of the aircraft from the display
overlays.
Each element of the output display matrix overlays holds a single
display attribute byte with fields for the colors, patterns, and
symbols shown in the following table:
-------------------------------------------------------------------------------
| Color | Threat |
-------------------------------------------------------------------------------
| Solid Red | Warning terrain (approximately 30 seconds from |
| | impact) |
|---------------------|-------------------------------------------------------|
| Solid Yellow | Caution terrain (approximately 60 seconds from |
| | impact) |
|---------------------|-------------------------------------------------------|
| High Density Red | Terrain that is more than 2000 ft. above aircraft |
| | altitude |
|---------------------|-------------------------------------------------------|
| High Density | Terrain that is between 1000 ft. and 2000 ft. above |
| Yellow | aircraft altitude |
|---------------------|-------------------------------------------------------|
| Medium Density | Terrain that is 500 ft. (250 ft. with gear down) |
| Yellow | below to 1000 ft. above aircraft altitude |
|---------------------|-------------------------------------------------------|
| Solid Green | (Peaks only) Highest terrain not within 500 ft. |
| | (250 ft. with gear down) of aircraft altitude. |
| | Mainly appears with dotted yellow terrain when the |
| | aircraft altitude is within 500 ft. (250 ft. with |
| | gear down) of terrain. |
|---------------------|-------------------------------------------------------|
| Hight Density | Terrain that is 500 ft. (250 ft. with gear down) below|
| Green Dots (1) | to 1000 ft. below aircraft altitude. |
| |-------------------------------------------------------|
| | (Peaks only) Terrain that is the middle elevation band|
| | when there are no red or yellow terrain areas within |
| | range on the display. |
|---------------------|-------------------------------------------------------|
| Low Density | Terrain that is 1000 ft. to 2000 ft. below aircraft |
| Green Dots | altitude. |
| |-------------------------------------------------------|
| | (Peaks only) Terrain that is the middle elevation band|
R
EFF :
ALL 34-48-00
Page B35
Config-2 Feb 01/09
TAI
-------------------------------------------------------------------------------
| Color | Threat |
-------------------------------------------------------------------------------
| | when there are no red or yellow terrain areas within |
| | range on the display |
|---------------------|-------------------------------------------------------|
| Black | No close terrain (Ref. NOTE in para. D.(1)(d)1_) |
|---------------------|-------------------------------------------------------|
| Low Density | (Peaks only) Terrain elevation equal to 0 ft. MSL. |
| Cyan Dots | |
|---------------------|-------------------------------------------------------|
| Light Density | Unknown terrain |
| Magenta | |
-------------------------------------------------------------------------------
1
_ Background display (Option)
R
EFF :
ALL 34-48-00
Page B36
Config-2 Feb 01/09
TAI
The Peaks terrain display adds additional density patterns
and level thresholds to the standard mode display levels and
patterns. These additionallevels are based on absolute
terrain elevations in relation to the range and distribution
of terrain in the display area. The Peaks display is thus a
merged display applicable to all phases of flight. At
altitude safely above all terrain for the display range
chosen, the terrain is displayed independent of aircraft
altitude emphasizing the highest and lowest elevations to
provide increased situational awareness. This increased
awareness can be particularly valuable to the flight crew in
the event of an unplanned descent or off-route deviation and
for the purpose of previewing terrain prior to descent.
The Peaks display includes a high green level to indicate
the highest non-threatening terrain. The standard lower
density green display patterns indicate mid and upper
terrain in the display area as well as terrain that is
within 2000 ft.of the aircraft. The red and yellow dot
patterns are unchanged and continue to indicate terrain that
is near or above the current altitude of the aircraft. Solid
yellow and red colors are also unchanged and continue to
indicate caution and warning areas in relation to the flight
path of the aircraft. Terrain identified as water (0 ft.
MSL) is displayed as cyan dots. The Peaks display is
prioritized such that higher level colors and densities
override lower color and densities for maximum situational
awareness of the most significant terrain in relation to the
altitude and flight path of the aircraft.
R
EFF :
ALL 34-48-00
Page B37
Config-2 Feb 01/09
TAI
the highest terrain color pattern on the display, and the
lowest terrain number is shown in the color of the lowest
terrain color pattern shown on the display. A single
elevation number is displayed when the screen is all black
or blue as a result of flying over water or relatively flat
terrain where there is no appreciable difference in terrain
elevations.
On EIS 1, only the highest elevation number is displayed
within the terrain frame.
The elevation numbers on the display are an additional
indication that the terrain display is selected.
2
_ Terrain and Obstacle caution alert (option)
R
EFF :
ALL 34-48-00
Page B38
Config-2 Feb 01/09
TAI
OBSTACLE AHEAD, OBSTACLE AHEAD. The phrase is repeated after
seven seconds if still within the terrain caution envelope.
During a terrain caution alert or obstacle caution alert, the
GPWS legend of the PULL UP/GPWS pushbutton switches 4WZ and
5WZ is on.
During a terrain caution alert, areas where terrain violates
the terrain caution envelope along the aircraft track, and
within plus or minus 90 deg. of the aircraft track, are
painted with the caution color 100 per cent yellow.
During an obstacle caution alert areas where an obstacle
violates the terraincaution envelope along the aircraft track,
and within plus or minus 90 deg. of the aircraft track, are
displayed with the caution color yellow.
3
_ Terrain and obstacle warning alert (option)
R
EFF :
ALL 34-48-00
Page B39
Config-2 Feb 01/09
TAI
NOTE : - Terrain is displayed on NDs if the ARC or ROSE mode
____
is selected on the FCU.
- When an alert (caution or warning) occurs and the FCU
mode is not a correct mode (ARC or ROSE), the message
TERR. CHANGE MODE is displayed on NDs.
- When an alert (caution or warning) occurs and the
range selected on the FCU is 160 or 320 NM the message
TERR. REDUCE RANGE is displayed on NDs.
R
EFF :
ALL 34-48-00
Page B40
Config-2 Feb 01/09
TAI
The obstacle data is processed by the display processing function
in the same fashion as terrain is presented on the display as
terrain (coloring scheme), and causes visual indications of
warning and caution alerts like terrain.
-------------------------------------------------------------------------------
| Input | Source |
-------------------------------------------------------------------------------
| Radio Altitude | External: Radio Altimeter |
|----------------------------------|------------------------------------------|
| Latitude | External: FMS |
|----------------------------------|------------------------------------------|
| Longitude | External: FMS |
|----------------------------------|------------------------------------------|
| Runway Center Latitude | Internal: data base |
|----------------------------------|------------------------------------------|
| Runway Center Longitude | Internal: data base |
|----------------------------------|------------------------------------------|
| Navigation mode | FMS |
|----------------------------------|------------------------------------------|
| Alert Envelope Parameters | Internal: data base |
|----------------------------------|------------------------------------------|
| 1/2 Runway Length | Internal: data base |
|----------------------------------|------------------------------------------|
| System Error Factor | Internal: data base |
-------------------------------------------------------------------------------
R
EFF :
ALL 34-48-00
Page B41
Config-2 Feb 01/09
TAI
(b) Runway Data Base
The TCF runway data base consists of data records containing the
position of airport runway center points along with 1/2 the
runway length. The data base includes all hard surface runways in
the world greater than or equal to 3500 ft. in length. The
process of generating this data base is certified and includes an
end check that validates that the data was not corrupted in the
translation process. This data base can be updated without
affecting the customer certified system part number.
The design of the data base and related software is such that
additional runway records can be added in the future without
altering the code. The data base provides a means of accessing
the runway record of the runway closest to the current aircraft
position.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page B42
Config-2 Nov 01/08
TAI
Enhanced GPWS - TCF Alert Envelope
Figure 024
R
EFF :
ALL 34-48-00
Page B43
Config-2 May 01/08
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-225, 301-307,
-------------------------------------------------------------------------------
| Input | Source |
-------------------------------------------------------------------------------
| Radio Altitude | External: Radio Altimeter |
|----------------------------------|------------------------------------------|
| Latitude | External: FMS |
|----------------------------------|------------------------------------------|
| Longitude | External: FMS |
|----------------------------------|------------------------------------------|
| Runway Center Latitude | Internal: data base |
|----------------------------------|------------------------------------------|
| Runway Center Longitude | Internal: data base |
|----------------------------------|------------------------------------------|
| Navigation mode | FMS |
|----------------------------------|------------------------------------------|
| Alert Envelope Parameters | Internal: data base |
|----------------------------------|------------------------------------------|
| 1/2 Runway Length | Internal: data base |
|----------------------------------|------------------------------------------|
| System Error Factor | Internal: data base |
-------------------------------------------------------------------------------
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-225, 301-307,
34-48-00
Page B44
Config-2 Nov 01/08
TAI
the world greater than or equal to 3500 ft. in length. The
process of generating this data base is certified and includes an
end check that validates that the data was not corrupted in the
translation process. This data base can be updated without
affecting the customer certified system part number.
The design of the data base and related software is such that
additional runway records can be added in the future without
altering the code. The data base provides a means of accessing
the runway record of the runway closest to the current aircaft
position.
The distance from the runway center to the inner envelope edge is
equal to 1/2 the runway length plus the envelope bias factor.
Thus the inner and outer radius of the envelope are modulated
based on the runway length and envelope bias factor. Runway
length varies from one runway to the next, and the envelope bias
factor is typically 1/2 NM to 2 NM and varies with position
accuracy.
The outer alert envelope boundary extends to infinity, or until
it meets the outer alert envelope boundary of another runway. The
alert is inhibited below radio altitude of 30 ft. This cutoff
value was chosen to match the current Mode 4 lower cutoff value.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-225, 301-307,
34-48-00
Page B45
Config-2 Nov 01/08
TAI
R **ON A/C 053-099, 211-212, 215-215, 218-229, 301-311, 401-404,
R
EFF : 053-099, 211-212, 215-215, 218-229,
301-311, 401-404,
34-48-00
Page B46
Config-2 Nov 01/08
TAI
operational mode and the number of satellites tracked are used if
available. The required GPS signals are provided via ADIRU on the
GPIRS bus or directly from the GPSSU or MMR. Standard altitude,
corrected barometric altitude, and SAT are provided directly from
the ADR. If SAT is not available, geometric altitude is computed
using standard altitude with a corresponding reduction in
accuracy.
1
_ Non-Standart Altitude
To support the Geometric Altitude function, the Enhanced GPWS
computes a non-standard altitude using the hydrostatic
equation relating changes in height to changes in pressure and
temperature. Non-standard altitude uses static pressure
derived from standard altitude, along with static air
temperature, to continuously accumulate changes in Geometric
Altitude. Since the non-standard altitude algorithm
incorporates actual atmospheric temperature, it does not
suffer from errors due to non-standard temperatures.
Non-standard altitude is highly accurate for measuring
relative vertical changes over short periods of time and
distance, such as during take off and approach. Non-standard
altitude does not provide an absolute altitude and is prone to
significant errors over extended periods of time and distance
due to the effects of pressure gradients and long-term
integration errors. Due to these limitations, non-standard
altitude is not used directly, but is calibrated using
additional signals and data to produce a set of component
altitudes for use in the final altitude solution.
R
EFF : 053-099, 211-212, 215-215, 218-229,
301-311, 401-404,
34-48-00
Page B47
Config-2 Nov 01/08
TAI
Enhanced GPWS - Additional logic
Figure 025
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-48-00
Page B48
Config-2 Nov 01/08
TAI
2
_ Computed component altitudes
The Enhanced GPWS generates three component altitudes that are
combined, along with corrected altitude if available, to
produce Geometric Altitude. These component altitudes are
runway calibrated altitude, GPS calibrated altitude, and radio
altitude calibrated altitude.
- Runway calibrated altitude is a one-time calibration of
non-standard altitude during take off run. A correction
factor for non-standard is computed using the runway
elevation from the Enhanced GPWS runway database while the
aircraft is on the ground. Runway calibrated altitude is
used during the take off and climb-out portions of flight.
VFOM of runway calibrated altitude is estimated based on
changes in altitude since calibration, time since
calibration, and distance from the runway.
- GPS calibrated altitude is produced by combining GPS
altitude and non-standard altitude through a complementary
filter. The complementary filter is dynamically optimized to
reduce errors in GPS altitude while minimizing pressure
gradient and drift errors of non-standard altitude. GPS
calibrated altitude is accurate through all phases of flight
and is the primary altitude source during the cruise portion
of flight. GPS calibrated altitude VFOM is estimate using
GPS VFOM and estimated non-standard altitude drift errors.
- Radio altitude calibrated altitude is a calibration of
non-standard altitude during approach using an altitude
derived from radio altitude (height above terrain) and the
terrain elevation data stored in the Enhanced GPWS terrain
database. This calibration is performed during the approach
phase of flight when the aircraft is within a minimum
distance and elevation of any runway. Once a correction
factor is determined, it is applied to non-standard altitude
until the aircraft lands. VFOM of radio altitude calibrated
altitude is based on the accuracy of the calibration as
estimated from the resolution of the terrain data and
flatness of the terrain. The altitude is re-calibrated if a
correction with a higher estimated accuracy is computed. An
estimated VFOM for corrected barometric altitude is computed
in order to determine its weight in the final altitude. VFOM
of corrected barometric altitude is based on aircraft
altitude above and distance from the nearest runway, with
the accuracy assumed to be the highest close to runway.
3
_ Blending and reasonableness checking
The final Geometric Altitude is computed by combining the
three computed component altitudes with optional corrected
barometric altitude. The weighting of each altitude in the
R
EFF : 053-099, 211-212, 215-215, 218-229,
301-311, 401-404,
34-48-00
Page B49
Config-2 Nov 01/08
TAI
final solution is based on the corresponding estimated VFOM.
The blending algorithm gives the most weight to altitudes with
a higher estimated accuracy, reducing the effect of less
accurate altitudes on the final computed altitude. Each
component altitude is also checked for reasonableness using a
window monitor computed from GPS altitude and GPS VFOM.
Altitudes that are invalid, not available, or fall outside the
reasonableness window are not included in the final blended
altitude.
-------------------------------------------------------------------------------
| Input | Source |
-------------------------------------------------------------------------------
| Radio Altitude | External: Radio Altimeter |
|----------------------------------|------------------------------------------|
| Latitude | External: FMS |
|----------------------------------|------------------------------------------|
| Longitude | External: FMS |
|----------------------------------|------------------------------------------|
| Runway Center Latitude | Internal: data base |
|----------------------------------|------------------------------------------|
| Runway Center Longitude | Internal: data base |
|----------------------------------|------------------------------------------|
| Navigation mode | FMS |
|----------------------------------|------------------------------------------|
| Alert Envelope Parameters | Internal: data base |
|----------------------------------|------------------------------------------|
| 1/2 Runway Length | Internal: data base |
|----------------------------------|------------------------------------------|
R
EFF : 053-099, 211-212, 215-215, 218-229,
301-311, 401-404,
34-48-00
Page B50
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| Input | Source |
-------------------------------------------------------------------------------
| System Error Factor | Internal: data base |
-------------------------------------------------------------------------------
The distance from the runway center to the inner envelope edge is
equal to 1/2 the runway length plus the envelope bias factor.
Thus the inner and outer radii of the envelope are modulated
based on the runway length and envelope bias factor. Runway
length varies from one runway to the next, and the envelope bias
factor is typically 1/2 NM to 2 NM and varies with position
accuracy.
The outer alert envelope boundary extends to infinity, or until
it meets the outer alert envelope boundary of another runway. The
alert is inhibited below radio altitude of 30 ft. This cutoff
value was chosen to match the current Mode 4 lower cutoff value.
R
EFF : 053-099, 211-212, 215-215, 218-229,
301-311, 401-404,
34-48-00
Page B51
Config-2 Nov 01/08
TAI
The TCF curve is limited to a minimum value of 245 ft. when it is
determined that the aircraft is to the side of the runway.
(d) Runway Field Clearance Floor (RFCF) The Runway Field Clearance
Floor (RFCF) alert envelope is a circular band centered over the
selected runway. But unlike the radio altitude based TCF
envelope, the RFCF envelope only extends 5 NM past the end of the
runway. The bias factor (where the protection starts) is equal to
the TCF Bias factor (k) plus an additional offset proportional to
the Geometric Altitude Figure Of Merit (FOM).
EFF : 053-099, 211-212, 215-215, 218-229,
301-311, 401-404,
34-48-00
Page B52
Config-2 Feb 01/09
TAI
Enhances GPWS - TCF Curve Limit
Figure 026
R
EFF : 053-099, 211-212, 215-215, 218-229,
301-311, 401-404,
34-48-00
Page B53
Config-2 Nov 01/08
TAI
Enhanced GPWS - TCF Curve Limit
Figure 026A
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-48-00
Page B54
Config-2 Feb 01/09
TAI
Enhanced GPWS - Shape of the Alert Envelope
Figure 027
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-48-00
Page B55
Config-2 Nov 01/08
TAI
R **ON A/C 053-099, 211-212, 215-215, 218-229, 301-311, 401-404,
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-299, 301-399, 401-499,
34-48-00
Page B56
Config-2 Nov 01/08
TAI
(3) Geometric Altitude
Geometric Altitude is a computed aircraft altitude designed to help
to ensure optimal operation of the Enhanced GPWS Terrain Awareness
and Display functions through all phases of flight and atmospheric
conditions. Geometric Altitude uses an improved pressure altitude
calculation, GPS altitude, radio altitude, and terrain and runway
elevation data to reduce or eliminate errors potentially induced in
corrected barometric altitude by temperature extremes, non-standard
altitude conditions, and altimeter miss-sets. Geometric Altitude also
allows continuous Enhanced GPWS operations in QFE environments
without custom inputs or special operational procedures. With the
Geometric Altitude function, Enhanced GPWS can operate reliably
throughout extreme local pressure or temperature variations from
standard, is not susceptible to altimeter miss-sets by the flight
crew, and will not require any custom inputs or special procedures by
the flight crew when operating in a QFE environment.
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page B57
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-211, 215-215, 219-299, 301-302, 306-309, 312-399,
R 401-499,
R Post SB 34-1287 For A/C 211-211,215-215,219-225,301-302,306-307,
R Post SB 34-1351 For A/C 201-203,211-211,215-215,219-225,301-302,306-307,
R Post SB 34-1352 For A/C 201-203,211-211,215-215,219-229,301-302,306-309,
R 401-404,
1
_ Non-Standart Altitude
To support the Geometric Altitude function, the Enhanced GPWS
computes a non-standard altitude using the hydrostatic
equation relating changes in height to changes in pressure and
temperature. Non-standard altitude uses static pressure
derived from standard altitude, along with static air
temperature, to continuously accumulate changes in Geometric
Altitude. Since the non-standard altitude algorithm
incorporates actual atmospheric temperature, it does not
suffer from errors due to non-standard temperatures.
Non-standard altitude is highly accurate for measuring
relative vertical changes over short periods of time and
distance, such as during take off and approach. Non-standard
altitude does not provide an absolute altitude and is prone to
significant errors over extended periods of time and distance
due to the effects of pressure gradients and long-term
integration errors. Due to these limitations, non-standard
altitude is not used directly, but is calibrated using
additional signals and data to produce a set of component
altitudes for use in the final altitude solution.
2
_ Computed component altitudes
The Enhanced GPWS generates three component altitudes that are
combined, along with corrected altitude if available, to
produce Geometric Altitude. These component altitudes are
runway calibrated altitude, GPS calibrated altitude, and radio
altitude calibrated altitude.
- Runway calibrated altitude is a one-time calibration of
non-standard altitude during take off run. A correction
factor for non-standard is computed using the runway
elevation from the Enhanced GPWS runway database while the
aircraft is on the ground. Runway calibrated altitude is
used during the take off and climb-out portions of flight.
VFOM of runway calibrated altitude is estimated based on
changes in altitude since calibration, time since
calibration, and distance from the runway.
- GPS calibrated altitude is produced by combining GPS
altitude and non-standard altitude through a complementary
filter. The complementary filter is dynamically optimized to
reduce errors in GPS altitude while minimizing pressure
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page B58
Config-2 Nov 01/08
TAI
gradient and drift errors of non-standard altitude. GPS
calibrated altitude is accurate through all phases of flight
and is the primary altitude source during the cruise portion
of flight. GPS calibrated altitude VFOM is estimate using
GPS VFOM and estimated non-standard altitude drift errors.
- Radio altitude calibrated altitude is a calibration of
non-standard altitude during approach using an altitude
derived from radio altitude (height above terrain) and the
terrain elevation data stored in the Enhanced GPWS terrain
database. This calibration is performed during the approach
phase of flight when the aircraft is within a minimum
distance and elevation of any runway. Once a correction
factor is determined, it is applied to non-standard altitude
until the aircraft lands. VFOM of radio altitude calibrated
altitude is based on the accuracy of the calibration as
estimated from the resolution of the terrain data and
flatness of the terrain. The altitude is re-calibrated if a
correction with a higher estimated accuracy is computed. An
estimated VFOM for corrected barometric altitude is computed
in order to determine its weight in the final altitude. VFOM
of corrected barometric altitude is based on aircraft
altitude above and distance from the nearest runway, with
the accuracy assumed to be the highest close to runway.
3
_ Blending and reasonableness checking
The final Geometric Altitude is computed by combining the
three computed component altitudes with optional corrected
barometric altitude. The weighting of each altitude in the
final solution is based on the corresponding estimated VFOM.
The blending algorithm gives the most weight to altitudes with
a higher estimated accuracy, reducing the effect of less
accurate altitudes on the final computed altitude. Each
component altitude is also checked for reasonableness using a
window monitor computed from GPS altitude and GPS VFOM.
Altitudes that are invalid, not available, or fall outside the
reasonableness window are not included in the final blended
altitude.
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page B59
Config-2 Nov 01/08
TAI
existing Mode 4 protection by providing an alert based on
insufficient terrain clearance even when in landing configuration.
Alerts for TCF illuminate GPWS cockpit lamps and produce aural
messages.
-------------------------------------------------------------------------------
| Input | Source |
-------------------------------------------------------------------------------
| Radio Altitude | External: Radio Altimeter |
|----------------------------------|------------------------------------------|
| Latitude | External: GPS/IRS/FMS |
|----------------------------------|------------------------------------------|
| Longitude | External: GPS/IRS/FMS |
|----------------------------------|------------------------------------------|
| Runway Center Latitude | Internal: data base |
|----------------------------------|------------------------------------------|
| Runway Center Longitude | Internal: data base |
|----------------------------------|------------------------------------------|
| Navigation mode | FMS |
|----------------------------------|------------------------------------------|
| Alert Envelope Parameters | Internal: data base |
|----------------------------------|------------------------------------------|
| 1/2 Runway Length | Internal: data base |
|----------------------------------|------------------------------------------|
| System Error Factor | Internal: data base |
-------------------------------------------------------------------------------
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page B60
Config-2 Nov 01/08
TAI
(c) Alert Envelope
The TCF alert envelope is a circular band centered over the
nearest runway.
The distance from the runway center to the inner envelope edge is
equal to 1/2 the runway length plus the envelope bias factor.
Thus the inner and outer radii of the envelope are modulated
based on the runway length and envelope bias factor. Runway
length varies from one runway to the next, and the envelope bias
factor is typically 0.25 NM to 1 NM and varies with position
accuracy.
The outer alert envelope boundary extends to infinity, or until
it meets the outer alert envelope boundary of another runway. The
alert is inhibited below radio altitude of 30 ft. This cutoff
value was chosen to match the current Mode 4 lower cutoff value.
The TCF curve is limited to a minimum value of 245 ft. when it is
determined that the aircraft is to the side of the runway.
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page B61
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-211, 215-215, 219-299, 301-302, 306-309, 312-399,
R 401-499,
R Post SB 34-1287 For A/C 211-211,215-215,219-225,301-302,306-307,
R Post SB 34-1351 For A/C 201-203,211-211,215-215,219-225,301-302,306-307,
R Post SB 34-1352 For A/C 201-203,211-211,215-215,219-229,301-302,306-309,
R 401-404,
(d) Runway Field Clearance Floor (RFCF) The Runway Field Clearance
Floor (RFCF) alert envelope is a circular band centered over the
selected runway. But unlike the radio altitude based TCF
envelope, the RFCF envelope only extends 5 NM past the end of the
runway. The bias factor (where the protection starts) is equal to
the TCF Bias factor (k) plus an additional offset proportional to
the Geometric Altitude Figure Of Merit (FOM).
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page B62
Config-2 Nov 01/08
TAI
switches 4WZ and 5WZ comes on. The legends remain on until the
alert envelope is exited.
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page B63
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-212, 215-215, 218-222, 301-306,
------------------------------------------------------------------------
| RELATIVE | WARNING | POSSIBLE | LEGEND |
| PRIORITY | CONDITION | MESSAGES | |
|----------------------------------------------------------------------|
| HIGHEST | Mode 1 Pull Up | PULL UP | GPWS |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up Preface | TERRAIN TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up | PULL UP | GPWS |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Preface| TERRAIN AHEAD | GPWS |
| | | PULL UP | |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Warning| TERRAIN AHEAD | GPWS |
| | | PULL UP | |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Terrain | TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Terrain Awareness Caution| TERRAIN AHEAD | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Terrain | TOO LOW TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| | TCF Too Low Terrain | TOO LOW TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Gear | TOO LOW GEAR | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Flaps | TOO LOW FLAPS | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 1 Sinkrate | SINKRATE | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 3 Dont Sink | DONT SINK | GPWS |
|----------|--------------------------|-------------------|------------|
| LOWEST * | Mode 5 Glide slope | GLIDE SLOPE | G/S |
------------------------------------------------------------------------
R
EFF :
301-306,
201-203, 211-212, 215-215, 218-222, 34-48-00
Page B64
Config-2 Nov 01/08
TAI
* Allows interleaving of multiple alerts.
The voice warning circuits also contain logic elements which ensure
that:
- only one message at a time is output,
- higher priority messages interrupt lower priority messages except
if interleaving is allowed (Ref. table above),
- a triggered message is completed even when warning condition
ceases,
- a 0.75 second pause exists between warning messages.
(4) Inhibitions
(Ref. Fig. 006)
R
EFF :
301-306,
201-203, 211-212, 215-215, 218-222, 34-48-00
Page B65
Config-2 Nov 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028 (SHEET 1)
R
EFF :
223-229, 307-311, 401-404, 34-48-00
Page B66
Config-2 Nov 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028 (SHEET 2)
R
EFF :
223-229, 307-311, 401-404, 34-48-00
Page B67
Config-2 Nov 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028 (SHEET 3)
R
EFF :
223-229, 307-311, 401-404, 34-48-00
Page B68
Config-2 Nov 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028 (SHEET 4)
R
EFF :
223-229, 307-311, 401-404, 34-48-00
Page B69
Config-2 Nov 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028A (SHEET 1)
R
EFF :
230-234, 34-48-00
Page B70
Config-2 May 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028A (SHEET 2)
R
EFF :
230-234, 34-48-00
Page B71
Config-2 May 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028A (SHEET 3)
R
EFF :
230-234, 34-48-00
Page B72
Config-2 May 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028A (SHEET 4)
R
EFF :
230-234, 34-48-00
Page B73
Config-2 May 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028B (SHEET 1)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page B74
Config-2 Nov 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028B (SHEET 2)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page B75
Config-2 Nov 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028B (SHEET 3)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page B76
Config-2 Nov 01/08
TAI
Enhanced GPWS - Control and Indicating
Figure 028B (SHEET 4)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page B77
Config-2 Nov 01/08
TAI
- When the automatic deselection option actived TAD and TCF
functions may also be inhibit automatically when the FMS
aircraft position accuracy is not accurate enough. This is
indicated to the crew by the automatic deselection of terrain
display and the illumation of the TERR STBY memo on the ECAM
display unit.
R
EFF :
301-306,
201-203, 211-212, 215-215, 218-222, 34-48-00
Page B78
Config-2 Feb 01/09
TAI
**ON A/C 001-050, 053-099,
------------------------------------------------------------------------
| RELATIVE | WARNING | POSSIBLE | LEGEND |
| PRIORITY | CONDITION | MESSAGES | |
|----------------------------------------------------------------------|
| HIGHEST | Mode 1 Pull Up | PULL UP | GPWS |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up Preface | TERRAIN TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up | PULL UP | GPWS |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Preface| TERRAIN TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Warning| PULL UP | GPWS |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Terrain | TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Terrain Awareness Caution| CAUTION TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Terrain | TOO LOW TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| | TCF Too Low Terrain | TOO LOW TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Gear | TOO LOW GEAR | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Flaps | TOO LOW FLAPS | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 1 Sinkrate | SINKRATE | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 3 Dont Sink | DONT SINK | GPWS |
|----------|--------------------------|-------------------|------------|
| LOWEST * | Mode 5 Glide slope | GLIDE SLOPE | G/S |
------------------------------------------------------------------------
R
EFF :
001-050, 053-099, 34-48-00
Page B79
Config-2 Feb 01/09
TAI
* Allows interleaving of multiple alerts.
The voice warning circuits also contain logic elements which ensure
that:
- only one message at a time is output,
- higher priority messages interrupt lower priority messages except
if interleaving is allowed (Ref. table above),
- a triggered message is completed even when warning condition
ceases,
- a 0.75 second pause exists between warning messages.
(4) Inhibitions
(Ref. Fig. 006, 006A)
R
EFF :
001-050, 053-099, 34-48-00
Page B80
Config-2 Feb 01/09
TAI
(b) Modes 1 to 5 inhibitions:
- The INHIBIT MODES 1 TO 5 discrete input controls the audio and
visual outputs as follows. When grounded,this input always
inhibits all GPWS aural and visual indications with the
exception of Terrain Clearance Floor Alerts and Terrain
Awareness caution and warnings. This input is wired to SYS
pushbutton switch to manually inhibit GPWS Modes 1 to 5.
R
EFF :
001-050, 053-099, 34-48-00
Page B81
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
Figure 028C (SHEET 1)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page B82
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
Figure 028C (SHEET 2)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page B83
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
Figure 028C (SHEET 3)
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page B84
Config-2 Feb 01/09
R
TAI
Enhanced GPWS - Control and Indicating
Figure 028C (SHEET 4)
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-306,
34-48-00
Page B85
Config-2 Feb 01/09
R
TAI
Enhanced GPWS - Control and Indicating
R Figure 028D (SHEET 1)
R
EFF :
001-050, 053-099, 34-48-00
Page B86
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
R Figure 028D (SHEET 2)
R
EFF :
001-050, 053-099, 34-48-00
Page B87
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
R Figure 028D (SHEET 3)
EFF :
001-050, 053-099, 34-48-00
Page B88
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
R Figure 028D (SHEET 4)
EFF :
001-050, 053-099, 34-48-00
Page B89
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
R Figure 028E (SHEET 1)
EFF :
001-050, 053-099, 34-48-00
Page B90
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
R Figure 028E (SHEET 2)
EFF :
001-050, 053-099, 34-48-00
Page B91
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
R Figure 028E (SHEET 3)
EFF :
001-050, 053-099, 34-48-00
Page B92
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
R Figure 028E (SHEET 4)
EFF :
001-050, 053-099, 34-48-00
Page B93
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
R Figure 028F (SHEET 1)
EFF :
001-050, 053-099, 34-48-00
Page B94
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
R Figure 028F (SHEET 2)
EFF :
001-050, 053-099, 34-48-00
Page B95
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
R Figure 028F (SHEET 3)
R
EFF :
001-050, 053-099, 34-48-00
Page B96
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
R Figure 028F (SHEET 4)
R
EFF :
001-050, 053-099, 34-48-00
Page B97
Config-2 Feb 01/09
TAI
E. Warning Generation and Inhibition
------------------------------------------------------------------------
| RELATIVE | WARNING | POSSIBLE | LEGEND |
| PRIORITY | CONDITION | MESSAGES | |
|----------------------------------------------------------------------|
| HIGHEST | Mode 1 Pull Up | PULL UP | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up Preface | TERRAIN TERRAIN | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up | PULL UP | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Preface| TERRAIN TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Warning| PULL UP | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Terrain | TERRAIN | PULL UP |
|----------|--------------------------|-------------------|------------|
| * | Terrain Awareness Caution| CAUTION TERRAIN | PULL UP |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Terrain | TOO LOW TERRAIN | PULL UP |
|----------|--------------------------|-------------------|------------|
| | TCF Too Low Terrain | TOO LOW TERRAIN | PULL UP |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Gear | TOO LOW GEAR | PULL UP |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Flaps | TOO LOW FLAPS | PULL UP |
|----------|--------------------------|-------------------|------------|
| * | Mode 1 Sinkrate | SINKRATE | PULL UP |
|----------|--------------------------|-------------------|------------|
| * | Mode 3 Dont Sink | DONT SINK | PULL UP |
|----------|--------------------------|-------------------|------------|
| LOWEST * | Mode 5 Glide slope | GLIDE SLOPE | GPWS |
------------------------------------------------------------------------
The voice warning circuits also contain logic elements which ensure
that:
R
EFF :
001-050, 053-099, 34-48-00
Page B98
Config-2 Feb 01/09
TAI
- only one message at a time is output,
- higher priority messages interrupt lower priority messages except
if interleaving is allowed (Ref. table above),
- a triggered message is completed even when warning condition
ceases,
- a 0.75 second pause exists between warning messages.
R
EFF :
001-050, 053-099, 34-48-00
Page B99
Config-2 Feb 01/09
TAI
R **ON A/C 001-050, 053-099,
------------------------------------------------------------------------
| RELATIVE | WARNING | POSSIBLE | LEGEND |
| PRIORITY | CONDITION | MESSAGES | |
|----------------------------------------------------------------------|
| HIGHEST | Mode 1 Pull Up | PULL UP | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up Preface | TERRAIN TERRAIN | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up | PULL UP | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Preface| TERRAIN TERRAIN | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Warning| PULL UP | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Obstacle Awareness | OBSTACLE OBSTACLE | PULL UP |
| | Preface | | |
|----------|--------------------------|-------------------|------------|
| | Obstacle Awareness | PULL UP | PULL UP |
| | Warning | | |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Terrain | TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Terrain Awareness Caution| CAUTION TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Obstacle Awareness | CAUTION OBSTACLE | GPWS |
| | Caution | | |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Terrain | TOO LOW TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| | TCF Too Low Terrain | TOO LOW TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Gear | TOO LOW GEAR | GPWS |
R
EFF :
001-050, 053-099, 34-48-00
Page C0
Config-2 Feb 01/09
TAI
------------------------------------------------------------------------
| RELATIVE | WARNING | POSSIBLE | LEGEND |
| PRIORITY | CONDITION | MESSAGES | |
|----------------------------------------------------------------------|
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Flaps | TOO LOW FLAPS | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 1 Sinkrate | SINKRATE | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 3 Dont Sink | DONT SINK | GPWS |
|----------|--------------------------|-------------------|------------|
| LOWEST * | Mode 5 Glide slope | GLIDE SLOPE | GPWS |
------------------------------------------------------------------------
The voice warning circuits also contain logic elements which ensure
that:
- only one message at a time is output,
- higher priority messages interrupt lower priority messages except
if interleaving is allowed (Ref. table above),
- a triggered message is completed even when warning condition
ceases,
- a 0.75 second pause exists between warning messages.
R
EFF :
001-050, 053-099, 34-48-00
Page C1
Config-2 Feb 01/09
TAI
R **ON A/C 001-050, 053-099,
(4) Inhibitions
(Ref. Fig. 006, 006A)
R
EFF :
001-050, 053-099, 34-48-00
Page C2
Config-2 Feb 01/09
TAI
**ON A/C 201-203, 211-212, 215-215, 218-228, 301-309, 401-401,
------------------------------------------------------------------------
| RELATIVE | WARNING | POSSIBLE | LEGEND |
| PRIORITY | CONDITION | MESSAGES | |
|----------------------------------------------------------------------|
| HIGHEST | Mode 1 Pull Up | PULL UP | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up Preface | TERRAIN TERRAIN | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up | PULL UP | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Preface| TERRAIN AHEAD | PULL UP |
| | | PULL UP | |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Warning| TERRAIN AHEAD | PULL UP |
| | | PULL UP | |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Terrain | TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Terrain Awareness Caution| TERRAIN AHEAD | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Terrain | TOO LOW TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| | TCF Too Low Terrain | TOO LOW TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Gear | TOO LOW GEAR | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Flaps | TOO LOW FLAPS | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 1 Sinkrate | SINKRATE | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 3 Dont Sink | DONT SINK | GPWS |
|----------|--------------------------|-------------------|------------|
| LOWEST * | Mode 5 Glide slope | GLIDE SLOPE | GPWS |
------------------------------------------------------------------------
R
EFF : 201-203, 211-212, 215-215, 218-228,
301-309, 401-401,
34-48-00
Page C3
Config-2 Feb 01/09
TAI
* Allows interleaving of multiple alerts.
The voice warning circuits also contain logic elements which ensure
that:
- only one message at a time is output,
- higher priority messages interrupt lower priority messages except
if interleaving is allowed (Ref. table above),
- a triggered message is completed even when warning condition
ceases,
- a 0.75 second pause exists between warning messages.
(4) Inhibitions
(Ref. Fig. 006A)
R
EFF : 201-203, 211-212, 215-215, 218-228,
301-309, 401-401,
34-48-00
Page C4
Config-2 Feb 01/09
TAI
used to manage the audio priority with other systems (FWS, PWS,
TCAS).
R
EFF : 201-203, 211-212, 215-215, 218-228,
301-309, 401-401,
34-48-00
Page C5
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
Figure 028G (SHEET 1)
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page C6
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
Figure 028G (SHEET 2)
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page C7
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
Figure 028G (SHEET 3)
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page C8
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
Figure 028G (SHEET 4)
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page C9
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
Figure 028H (SHEET 1)
R
EFF :
212-212, 218-218, 303-304, 310-311, 34-48-00
Page C10
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
Figure 028H (SHEET 2)
R
EFF :
212-212, 218-218, 303-304, 310-311, 34-48-00
Page C11
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
Figure 028H (SHEET 3)
R
EFF :
212-212, 218-218, 303-304, 310-311, 34-48-00
Page C12
Config-2 Feb 01/09
TAI
Enhanced GPWS - Control and Indicating
Figure 028H (SHEET 4)
R
EFF :
212-212, 218-218, 303-304, 310-311, 34-48-00
Page C13
Config-2 Feb 01/09
TAI
**ON A/C 201-203, 211-211, 215-215, 219-299, 301-302, 306-309, 312-399,
401-499,
Post SB 34-1345 For A/C 201-203,211-211,215-215,219-228,301-302,306-309,
401-401,
Post SB 34-1352 For A/C 201-203,211-211,215-215,219-229,301-302,306-309,
401-404,
------------------------------------------------------------------------
| RELATIVE | WARNING | POSSIBLE | LEGEND |
| PRIORITY | CONDITION | MESSAGES | |
|----------------------------------------------------------------------|
| HIGHEST | Mode 1 Pull Up | PULL UP | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up Preface | TERRAIN TERRAIN | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Pull Up | PULL UP | PULL UP |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Preface| TERRAIN AHEAD | PULL UP |
| | | PULL UP | |
|----------|--------------------------|-------------------|------------|
| | Terrain Awareness Warning| TERRAIN AHEAD | PULL UP |
| | | PULL UP | |
|----------------------------------------------------------------------|
| | Obstacle awareness | OBSTACLE AHEAD | PULL UP |
| | Preface | PULL UP | |
|----------|--------------------------|-------------------|------------|
| | Obstacle Awareness | OBSTACLE AHEAD | PULL UP |
| | Warning | PULL UP | |
|----------|--------------------------|-------------------|------------|
| | Mode 2 Terrain | TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Terrain Awareness Caution| TERRAIN AHEAD | GPWS |
|----------|--------------------------|-------------------|------------|
| | Obstacle Awareness | OBSTACLE AHEAD | GPWS |
| | Caution | | |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Terrain | TOO LOW TERRAIN | GPWS |
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page C14
Config-2 Feb 01/09
TAI
------------------------------------------------------------------------
| RELATIVE | WARNING | POSSIBLE | LEGEND |
| PRIORITY | CONDITION | MESSAGES | |
|----------------------------------------------------------------------|
|----------|--------------------------|-------------------|------------|
| | TCF Too Low Terrain | TOO LOW TERRAIN | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Gear | TOO LOW GEAR | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 4 Too Low Flaps | TOO LOW FLAPS | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 1 Sinkrate | SINKRATE | GPWS |
|----------|--------------------------|-------------------|------------|
| * | Mode 3 Dont Sink | DONT SINK | GPWS |
|----------|--------------------------|-------------------|------------|
| LOWEST * | Mode 5 Glide slope | GLIDE SLOPE | GPWS |
------------------------------------------------------------------------
The voice warning circuits also contain logic elements which ensure
that:
- only one message at a time is output,
- higher priority messages interrupt lower priority messages except
if interleaving is allowed (Ref. table above),
- a triggered message is completed even when warning condition
ceases,
- a 0.75 second pause exists between warning messages.
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page C15
Config-2 Feb 01/09
TAI
**ON A/C 230-234,
(4) Inhibitions
(Ref. Fig. 006B)
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page C16
Config-2 Feb 01/09
TAI
display indications. This input is wired to the TERR pushbutton
switch to manually inhibit the TAD and TCF functions.
- When the automatic deselection is activated, the TAD and TCF
functions can also be automatically inhibited when the aircraft
position is not accurate enough. This is indicated to the crew
by the automatic deselection of the terrain display and the
illumination of the TERR STBY memo on the EWD.
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page C17
Config-2 Feb 01/09
TAI
R **ON A/C 212-212, 218-218, 229-229, 303-304, 310-311, 402-404,
R ------------------------------------------------------------------------
R | RELATIVE | WARNING | POSSIBLE | LEGEND |
R | PRIORITY | CONDITION | MESSAGES | |
R |----------------------------------------------------------------------|
R | HIGHEST | Mode 1 Pull Up | PULL UP | PULL UP |
R |----------|--------------------------|-------------------|------------|
R | | Mode 2 Pull Up Preface | TERRAIN TERRAIN | PULL UP |
R |----------|--------------------------|-------------------|------------|
R | | Mode 2 Pull Up | PULL UP | PULL UP |
R |----------|--------------------------|-------------------|------------|
R | | Terrain Awareness Preface| TERRAIN AHEAD | PULL UP |
R | | | PULL UP | |
R |----------|--------------------------|-------------------|------------|
R | | Terrain Awareness Warning| TERRAIN AHEAD | PULL UP |
R | | | PULL UP | |
R |----------------------------------------------------------------------|
R | | Obstacle awareness | OBSTACLE AHEAD | PULL UP |
R | | Preface | PULL UP | |
R |----------|--------------------------|-------------------|------------|
R | | Obstacle Awareness | OBSTACLE AHEAD | PULL UP |
R | | Warning | PULL UP | |
R |----------|--------------------------|-------------------|------------|
R | | Mode 2 Terrain | TERRAIN | GPWS |
R |----------|--------------------------|-------------------|------------|
R | * | Terrain Awareness Caution| TERRAIN AHEAD | GPWS |
R |----------|--------------------------|-------------------|------------|
R | | Obstacle Awareness | OBSTACLE AHEAD | GPWS |
R | | Caution | | |
R |----------|--------------------------|-------------------|------------|
R | * | Mode 4 Too Low Terrain | TOO LOW TERRAIN | GPWS |
R |----------|--------------------------|-------------------|------------|
R | | TCF Too Low Terrain | TOO LOW TERRAIN | GPWS |
R |----------|--------------------------|-------------------|------------|
R
EFF : 212-212, 218-218, 229-229, 303-304,
310-311, 402-404,
34-48-00
Page C18
Config-2 Feb 01/09
TAI
------------------------------------------------------------------------
| RELATIVE | WARNING | POSSIBLE | LEGEND |
| PRIORITY | CONDITION | MESSAGES | |
|----------------------------------------------------------------------|
R | * | Mode 4 Too Low Gear | TOO LOW GEAR | GPWS |
R |----------|--------------------------|-------------------|------------|
R | * | Mode 4 Too Low Flaps | TOO LOW FLAPS | GPWS |
R |----------|--------------------------|-------------------|------------|
R | * | Mode 1 Sinkrate | SINKRATE | GPWS |
R |----------|--------------------------|-------------------|------------|
R | * | Mode 3 Dont Sink | DONT SINK | GPWS |
R |----------|--------------------------|-------------------|------------|
R | LOWEST * | Mode 5 Glide slope | GLIDE SLOPE | GPWS |
R ------------------------------------------------------------------------
R
EFF : 212-212, 218-218, 229-229, 303-304,
310-311, 402-404,
34-48-00
Page C19
Config-2 Feb 01/09
TAI
R **ON A/C 310-311,
R (4) Inhibitions
R (Ref. Fig. 006A)
R
EFF : 212-212, 218-218, 229-229, 303-304,
310-311, 402-404,
34-48-00
Page C20
Config-2 Feb 01/09
TAI
**ON A/C ALL
8. Test
____
R
EFF :
ALL 34-48-00
Page C21
Config-2 Feb 01/09
TAI
INTENTIONALLY BLANK
R
34-48-00
Page C22
Config-2 Feb 01/09
TAI
INTENTIONALLY BLANK
R
34-48-00
Page C23
Config-2 Nov 01/08
TAI
INTENTIONALLY BLANK
R
34-48-00
Page C24
Config-2 Feb 01/09
TAI
Enhanced GPWS - Autotilt Capability
Figure 029
R
EFF :
ALL 34-48-00
Page C25
Config-2 Nov 01/08
TAI
**ON A/C 201-203, 301-302,
A. Self-Tests
(1) On the ground only, the Enhanced GPWC provides self-test capability,
providing an indication of the ability of the Enhanced GPWC to
perform its intended function.
(a) Level 1
Level 1, functional testing, provides an overview of the current
operational functions selected and provides an indication of
their operational status.
Level 1 self-test sequence:
- the FAULT legend of the GPWS/SYS pushbutton switch is on,
- the FAULT legend of the GPWS/TERR pushbutton switch is on,
- G/S legends of both GPWS/G/S pushbutton switches are on,
- GLIDE SLOPE audio phase is broadcast,
- G/S legends of both GPWS/G/S pushbutton switches go off,
- GPWS legends of both GPWS/G/S pushbutton switches are on,
- PULL UP audio phase is broadcast,
- TERRAIN AHEAD PULL UP audio phase is broadcast,
- GPWS legends of both GPWS/G/S pushbutton switches go off,
- ON legends of both TERR ON ND pushbutton switches are on,
- terrain self-test pattern is displayed on both NDs,
(Ref. Fig. 030A)
A long level 1 self-test sequence is initiated when the
GPWS/G/S pushbutton switch is not released while self-test
voices start.
- Additional vocabulary sequence when long self-test initiated:
R
EFF :
201-203, 301-302, 34-48-00
Page C26
Config-2 Nov 01/08
TAI
Enhanced GPWS - Test Pattern
Figure 030
R
EFF :
229-229, 310-311, 402-404, 34-48-00
Page C27
Config-2 Nov 01/08
TAI
Enhanced GPWS - Test Pattern
Figure 030A
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-228, 301-309, 401-401,
34-48-00
Page C28
Config-2 Nov 01/08
TAI
SINK RATE
PULL UP
TERRAIN
PULL UP
DONT SINK
DONT SINK
TOO LOW TERRAIN
TOO LOW GEAR
TOO LOW FLAPS
TOO LOW TERRAIN
GLIDE SLOPE
MINIMUMS MINIMUMS (with P/N 102-102 only)
TOO LOW TERRAIN
TERRAIN AHEAD
TERRAIN AHEAD
TERRAIN AHEAD PULL UP
(b) Level 2
Level 2, current faults, provides a listing of the internal and
external faults currently detected by the Enhanced GPWC.
Level 2 self-test is initiated by pressing the GPWS/G/S
pushbutton switch within 3 seconds after the end of level 1
self-test.
(c) Level 3
Level 3, Enhanced GPWS configuration, indicates the current
configuration by listing the current hardware, software, data
bases and program pin inputs detected by the Enhanced GPWC.
This level is initiated by pressing the GPWS/G/S pushbutton
switch when PRESS TO CONTINUE message is enunciated.
(d) Level 4
Level 4, fault history, provides a historical record of both
internal and external faults detected by the Enhanced GPWC.
This level is initiated by pressing the GPWS/G/S pushbutton
switch when PRESS TO CONTINUE message is enunciated.
R
EFF :
201-203, 301-302, 34-48-00
Page C29
Config-2 Nov 01/08
TAI
(e) Level 5
Level 5, warning history, provides a historical record of the
warnings and cautions given by the Enhanced GPWC.
This level is initiated by pressing the GPWS/G/S pushbutton
switch when PRESS TO CONTINUE message is enunciated.
(f) Level 6
Level 6, discrete test, provides annunciation of discrete input
transitions to be used for maintenance support.
This level is initiated by pressing the GPWS/G/S pushbutton
switch when PRESS TO CONTINUE message is enunciated.
A. Self-Tests
(1) On the ground only, the Enhanced GPWC provides self-test capability,
both in flight and on ground, providing an indication of the ability
of the Enhanced GPWC to perform its intended function.
(a) Level 1
Level 1, functional testing, provides an overview of the current
operational functions selected and provides an indication of
their operational status.
Level 1 self-test sequence:
- the FAULT legend of the GPWS/SYS pushbutton switch is on,
- the FAULT legend of the GPWS/TERR pushbutton switch is on,
R
EFF :
001-050, 053-099, 201-203, 301-302, 34-48-00
Page C30
Config-2 Feb 01/09
TAI
- GPWS legends of both PULL UP/GPWS pushbutton switches are on,
- GLIDE SLOPE audio phase is broadcast,
- GPWS legends of both PULL UP/GPWS pushbutton switches go off,
- PULL UP legends of both PULL UP/GPWS pushbutton switches are
on,
- PULL UP audio phase is broadcast,
- TERRAIN TERRAIN PULL UP audio phase is broadcast,
- PULL UP legends of both PULL UP/GPWS pushbutton switches go
off,
- ON legends of both TERR ON ND pushbutton switches are on,
- terrain self-test pattern is displayed on both NDs,
(Ref. Fig. 030A)
R
EFF :
001-050, 053-099, 34-48-00
Page C31
Config-2 Feb 01/09
TAI
R Enhanced GPWS - Test Pattern
R Figure 030B
R
EFF :
001-050, 212-212, 218-218, 303-304, 34-48-00
Page C32
Config-2 Nov 01/08
TAI
SINK RATE
PULL UP
TERRAIN
PULL UP
DONT SINK
DONT SINK
TOO LOW TERRAIN
TOO LOW GEAR
TOO LOW FLAPS
TOO LOW TERRAIN
GLIDE SLOPE
MINIMUMS MINIMUMS
TOO LOW TERRAIN
CAUTION TERRAIN
CAUTION TERRAIN
TERRAIN TERRAIN PULL UP
(b) Level 2
Level 2, current faults, provides a listing of the internal and
external faults currently detected by the Enhanced GPWC.
Level 2 self-test is initiated by pressing the PULL UP/GPWS
pushbutton switch within 3 seconds after the end of level 1
self-test.
(c) Level 3
Level 3, Enhanced GPWS configuration, indicates the current
configuration by listing the current hardware, software, data
bases and program pin inputs detected by the Enhanced GPWC.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when PRESS TO CONTINUE message is enunciated.
(d) Level 4
Level 4, fault history, provides a historical record of both
internal and external faults detected by the Enhanced GPWC.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when PRESS TO CONTINUE message is enunciated.
R
EFF :
001-050, 053-099, 34-48-00
Page C33
Config-2 Feb 01/09
TAI
(e) Level 5
Level 5, warning history, provides a historical record of the
warnings and cautions given by the Enhanced GPWC.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when PRESS TO CONTINUE message is enunciated.
(f) Level 6
Level 6, discrete test, provides annunciation of discrete input
transitions to be used for maintenance support.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when PRESS TO CONTINUE message is enunciated.
A. Self-Tests
(1) On the ground only, the Enhanced GPWC provides self-test capability,
both in flight and on ground, providing an indication of the ability
of the Enhanced GPWC to perform its intended function.
(a) Level 1
Level 1 (functional testing) provides an overview of the current
operational functions selected and provides an indication of
their operational status.
Level 1 self-test sequence:
- the FAULT legend of the GPWS/SYS pushbutton switch comes on,
EFF :
001-050, 053-099, 34-48-00
Page C34
Config-2 Feb 01/09
TAI
- the FAULT legend of the GPWS/TERR pushbutton switch comes on,
- the GPWS legends of both PULL UP/GPWS pushbutton switches come
on,
- the GLIDE SLOPE audio phase is broadcast,
- the GPWS legends of both PULL UP/GPWS pushbutton switches go
off,
- the PULL UP legends of both PULL UP/GPWS pushbutton switches
come on,
- the PULL UP audio phase is broadcast,
- the TERRAIN AHEAD PULL UP audio phase is broadcast,
- the PULL UP legends of both PULL UP/GPWS pushbutton switches go
off,
- the ON legends of both TERR ON ND pushbutton switches come on,
- the terrain self-test pattern is displayed on both NDs,
* The uppers area is colored in cyan if peaks option is
activated, black otherwise.
EFF :
001-050, 053-099, 34-48-00
Page C35
Config-2 Feb 01/09
TAI
Enhanced GPWS - Test Pattern
R Figure 030C
R
EFF :
ALL 34-48-00
Page C36
Config-2 Feb 01/09
TAI
Enhanced GPWS - Test Pattern
R Figure 030D
R
EFF : 053-099, 201-203, 211-211, 215-215,
219-299, 301-302, 306-309, 312-399, 401-499,
34-48-00
Page C37
Config-2 Feb 01/09
TAI
SINK RATE
PULL UP
TERRAIN
PULL UP
DONT SINK
DONT SINK
TOO LOW TERRAIN
TOO LOW GEAR
TOO LOW FLAPS
TOO LOW TERRAIN
GLIDE SLOPE
TOO LOW TERRAIN
CAUTION TERRAIN
CAUTION TERRAIN
TERRAIN TERRAIN PULL UP
CAUTION OBSTACLE
CAUTION OBSTACLE
OBSTACLE OBSTACLE PULL UP
(b) Level 2
Level 2 (current faults) provides a listing of the internal and
external fault currently detected by the Enhanced GPWC.
Level 2 self-test is initiated by pressing the PULL UP/GPWS
pushbutton switch within 3 seconds after the end of level 1
self-test.
(c) Level 3
Level 3 ( Enhanced GPWS configuration) indicates the current
configuration by listing the current hardware, software,
databases and program pin inputs detected by the Enhanced GPWC.
R
EFF :
001-050, 053-099, 34-48-00
Page C38
Config-2 Feb 01/09
TAI
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when the PRESS TO CONTINUE message is enunciated.
(d) Level 4
Level 4 (fault history) provides a historical record of both
internal and external faults detected by the Enhanced GPWC.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when the PRESS TO CONTINUE message is enunciated.
(e) Level 5
Level 5 (warning history) provides a historical record of the
warnings and cautions given by the Enhanced GPWC.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when the PRESS TO CONTINUE message is enunciated.
(f) Level 6
Level 6 (discrete test) provides annunciation of discrete input
transitions to be used for maintenance support.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when the PRESS TO CONTINUE message is enunciated.
R A. Self-Tests
R (1) On the ground only, the Enhanced GPWC provides self-test capability,
R both in flight and on ground, providing an indication of the ability
R of the Enhanced GPWC to perform its intended function.
R
EFF :
001-050, 053-099, 34-48-00
Page C39
Config-2 Feb 01/09
TAI
R (a) Level 1
R Level 1, functional testing, provides an overview of the current
R operational functions selected and provides an indication of
R their operational status.
R Level 1 self-test sequence:
R - the FAULT legend of the GPWS/SYS pushbutton switch is on,
R - the FAULT legend of the GPWS/TERR pushbutton switch is on,
R - G/S legends of both GPWS/G/S pushbutton switches are on,
R - GLIDE SLOPE audio phase is broadcast,
R - G/S legends of both GPWS/G/S pushbutton switches go off,
R - GPWS legends of both GPWS/G/S pushbutton switches are on,
R - PULL UP audio phase is broadcast,
R - TERRAIN TERRAIN PULL UP audio phase is broadcast,
R - GPWS legends of both GPWS/G/S pushbutton switches go off,
R - ON legends of both TERR ON ND pushbutton switches are on,
R - terrain self-test pattern is displayed on both NDs,
R (Ref. Fig. 030A)
R A long level 1 self-test sequence is initiated when the
R GPWS/G/S pushbutton switch is not released while self-test
R voices start.
R - Additional vocabulary sequence when long self-test initiated:
R
R SINK RATE
R PULL UP
R TERRAIN
R PULL UP
R DONT SINK
R DONT SINK
R TOO LOW TERRAIN
R TOO LOW GEAR
R TOO LOW FLAPS
R TOO LOW TERRAIN
R GLIDE SLOPE
R TOO LOW TERRAIN
R CAUTION TERRAIN
R CAUTION TERRAIN
R TERRAIN TERRAIN PULL UP
R
R - terrain self-test pattern turns off,
R - ON legends of both TERR ON ND pushbutton switches and the
R images displayed on both NDs revert to the configuration
R selected before the test,
R - the FAULT legend of the GPWS/SYS pushbutton switch goes off,
R - the FAULT legend of the GPWS/TERR pushbutton switch goes off.
R
EFF :
053-099, 34-48-00
Page C40
Config-2 Feb 01/09
TAI
R (b) Level 2
R Level 2, current faults, provides a listing of the internal and
R external faults currently detected by the Enhanced GPWC.
R Level 2 self-test is initiated by pressing the GPWS/G/S
R pushbutton switch within 3 seconds after the end of level 1
R self-test.
R (c) Level 3
R Level 3, Enhanced GPWS configuration, indicates the current
R configuration by listing the current hardware, software, data
R bases and program pin inputs detected by the Enhanced GPWC.
R This level is initiated by pressing the GPWS/G/S pushbutton
R switch when PRESS TO CONTINUE message is enunciated.
R (d) Level 4
R Level 4, fault history, provides a historical record of both
R internal and external faults detected by the Enhanced GPWC.
R This level is initiated by pressing the GPWS/G/S pushbutton
R switch when PRESS TO CONTINUE message is enunciated.
R (e) Level 5
R Level 5, warning history, provides a historical record of the
R warnings and cautions given by the Enhanced GPWC.
R This level is initiated by pressing the GPWS/G/S pushbutton
R switch when PRESS TO CONTINUE message is enunciated.
R (f) Level 6
R Level 6, discrete test, provides annunciation of discrete input
R transitions to be used for maintenance support.
R This level is initiated by pressing the GPWS/G/S pushbutton
R switch when PRESS TO CONTINUE message is enunciated.
A. Self-Tests
(1) On the ground only, the Enhanced GPWC provides self-test capability,
providing an indication of the ability of the Enhanced GPWC to
perform its intended function.
R
EFF : 053-099, 201-203, 211-212, 215-215,
218-228, 301-309, 401-401,
34-48-00
Page C41
Config-2 Feb 01/09
TAI
(2) The Enhanced GPWC self-test is initiated by momentarily pressing PULL
UP/GPWS pushbutton switches or activated via the MCDU on the ground.
When activated by pressing the PULL UP/GPWS pushbutton switches, the
self-test is enunciated, via the same audio system as the Enhanced
GPWS alerts. This self-test can also be accessed via the headphone
jack on the front panel of the Enhanced GPWC and it has been divided
into six different levels to help with Enhanced GPWC testing and
troubleshooting.
(a) Level 1
Level 1, functional testing, provides an overview of the current
operational functions selected and provides an indication of
their operational status.
Level 1 self-test sequence:
- the FAULT legend of the GPWS/SYS pushbutton switch is on,
- the FAULT legend of the GPWS/TERR pushbutton switch is on,
- GPWS legends of both PULL UP/GPWS pushbutton switches are on,
- GLIDE SLOPE audio phase is broadcast,
- GPWS legends of both PULL UP/GPWS pushbutton switches go off,
- PULL UP legends of both PULL UP/GPWS pushbutton switches are
on,
- PULL UP audio phase is broadcast,
- TERRAIN AHEAD PULL UP audio phase is broadcast,
- PULL UP legends of both PULL UP/GPWS pushbutton switches go
off,
- ON legends of both TERR ON ND pushbutton switches are on,
- terrain self-test pattern is displayed on both NDs,
R
EFF : 201-203, 211-212, 215-215, 218-228,
301-309, 401-401,
34-48-00
Page C42
Config-2 Feb 01/09
TAI
SINK RATE
PULL UP
TERRAIN
PULL UP
DONT SINK
DONT SINK
TOO LOW TERRAIN
TOO LOW GEAR
TOO LOW FLAPS
TOO LOW TERRAIN
GLIDE SLOPE
TOO LOW TERRAIN
TERRAIN AHEAD
TERRAIN AHEAD
TERRAIN AHEAD PULL UP
(b) Level 2
Level 2, current faults, provides a listing of the internal and
external faults currently detected by the Enhanced GPWC.
Level 2 self-test is initiated by pressing the PULL UP/GPWS
pushbutton switch within 3 seconds after the end of level 1
self-test.
(c) Level 3
Level 3, Enhanced GPWS configuration, indicates the current
configuration by listing the current hardware, software, data
bases and program pin inputs detected by the Enhanced GPWC.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when PRESS TO CONTINUE message is enunciated.
(d) Level 4
Level 4, fault history, provides a historical record of both
internal and external faults detected by the Enhanced GPWC.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when PRESS TO CONTINUE message is enunciated.
R
EFF : 201-203, 211-212, 215-215, 218-228,
301-309, 401-401,
34-48-00
Page C43
Config-2 Feb 01/09
TAI
(e) Level 5
Level 5, warning history, provides a historical record of the
warnings and cautions given by the Enhanced GPWC.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when PRESS TO CONTINUE message is enunciated.
(f) Level 6
Level 6, discrete test, provides annunciation of discrete input
transitions to be used for maintenance support.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when PRESS TO CONTINUE message is enunciated.
A. Self-Tests
(1) On the ground only, the Enhanced GPWC provides self-test capability,
both in flight and on ground, providing an indication of the ability
of the Enhanced GPWC to perform its intended function.
(a) Level 1
Level 1 (functional testing) provides an overview of the current
operational functions selected and provides an indication of
their operational status.
Level 1 self-test sequence:
- the FAULT legend of the GPWS/SYS pushbutton switch comes on,
- the FAULT legend of the GPWS/TERR pushbutton switch comes on,
- the GPWS legends of both PULL UP/GPWS pushbutton switches come
on,
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page C44
Config-2 Feb 01/09
TAI
- the GLIDE SLOPE audio phase is broadcast,
- the GPWS legends of both PULL UP/GPWS pushbutton switches go
off,
- the PULL UP legends of both PULL UP/GPWS pushbutton switches
come on,
- the PULL UP audio phase is broadcast,
- the TERRAIN AHEAD PULL UP audio phase is broadcast,
- the PULL UP legends of both PULL UP/GPWS pushbutton switches go
off,
- the ON legends of both TERR ON ND pushbutton switches come on,
- the terrain self-test pattern is displayed on both NDs.
* The uppers area is colored in cyan if peaks option is
activated, black otherwise.
R
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page C45
Config-2 Feb 01/09
TAI
SINK RATE
PULL UP
TERRAIN
PULL UP
DONT SINK
DONT SINK
TOO LOW TERRAIN
TOO LOW GEAR
TOO LOW FLAPS
TOO LOW TERRAIN
GLIDE SLOPE
TOO LOW TERRAIN
TERRAIN AHEAD
TERRAIN AHEAD
TERRAIN AHEAD PULL UP
OBSTACLE AHEAD
OBSTACLE AHEAD
OBSTACLE AHEAD PULL UP
(b) Level 2
Level 2 (current faults) provides a listing of the internal and
external fault currently detected by the Enhanced GPWC.
Level 2 self-test is initiated by pressing the PULL UP/GPWS
pushbutton switch within 3 seconds after the end of level 1
self-test.
(c) Level 3
Level 3 ( Enhanced GPWS configuration) indicates the current
configuration by listing the current hardware, software,
databases and program pin inputs detected by the Enhanced GPWC.
EFF : 201-203, 211-212, 215-215, 218-299,
301-399, 401-499,
34-48-00
Page C46
Config-2 Feb 01/09
R
TAI
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when the PRESS TO CONTINUE message is enunciated.
(d) Level 4
Level 4 (fault history) provides a historical record of both
internal and external faults detected by the Enhanced GPWC.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when the PRESS TO CONTINUE message is enunciated.
(e) Level 5
Level 5 (warning history) provides a historical record of the
warnings and cautions given by the Enhanced GPWC.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when the PRESS TO CONTINUE message is enunciated.
(f) Level 6
Level 6 (discrete test) provides annunciation of discrete input
transitions to be used for maintenance support.
This level is initiated by pressing the PULL UP/GPWS pushbutton
switch when the PRESS TO CONTINUE message is enunciated.
B. CFDS Interface
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-299, 301-399, 401-499,
34-48-00
Page C47
Config-2 Feb 01/09
TAI
- memorizes the faults which occurred during the last 63 flight
segments,
- monitors data inputs from the various peripherals (FMGC, RA
transceiver, ILS receiver, ADIRU, SFCC, LGCIU, ECAM control panel
and CFDIU),
- transmits to the CFDIU the result of the tests performed,
- can communicate with the CFDIU through the menus.
The BITE can operate in two modes:
- Nnormal mode
- Interactive mode.
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-229, 301-311, 401-404,
34-48-00
Page C48
Config-2 Feb 01/09
TAI
Maintenance Test Procedure - Sub-Menu Function
Figure 031
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-222, 301-307,
34-48-00
Page C49
Config-2 Feb 01/09
TAI
Maintenance Test Procedure - Sub-Menu Function
Figure 031A
R
EFF :
ALL 34-48-00
Page C50
Config-2 Feb 01/09
TAI
INTENTIONALLY BLANK
R
34-48-00
Page C51
Config-2 Feb 01/09
TAI
INTENTIONALLY BLANK
R
34-48-00
Page C52
Config-2 Feb 01/09
TAI
R **ON A/C 001-050, 053-099, 201-203, 211-212, 215-215, 218-222, 301-307,
- LRU IDENTIFICATION
- GROUND SCANNING
(Ref. Fig. 032)
- TROUBLE SHOOTING DATA
(Ref. Fig. 033)
- CLASS 3 FAULTS
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-229, 301-311, 401-404,
34-48-00
Page C53
Config-2 Nov 01/08
TAI
Maintenance Test Procedure - Sub-Menu Function
Figure 032
R
EFF :
ALL 34-48-00
Page C54
Config-2 Nov 01/08
TAI
Maintenance Test Procedure - Sub-Menu Function
Figure 033
R
EFF :
ALL 34-48-00
Page C55
Config-2 Nov 01/08
TAI
R **ON A/C 001-050, 053-099, 223-229, 308-311, 401-404,
- GROUND REPORT
(Ref. Fig. 032)
- CURRENT STATUS
(Ref. Fig. 033)
- TEST
(Ref. Fig. 034)
R
EFF : 001-050, 053-099, 201-203, 211-212,
215-215, 218-229, 301-311, 401-404,
34-48-00
Page C56
Config-2 Nov 01/08
TAI
Maintenance Test Procedure - Sub-Menu Function
Figure 034
EFF :
ALL 34-48-00
Page C57
Config-2 Nov 01/08
R
TAI
R **ON A/C 201-203, 211-211, 215-215, 219-299, 301-302, 306-309, 312-399,
R 401-499,
R Post SB 34-1352 For A/C 201-203,211-211,215-215,219-229,301-302,306-309,
R 401-404,
B. CFDS Interface
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page C58
Config-2 Nov 01/08
TAI
R **ON A/C 201-203, 211-211, 215-215, 219-222, 301-302, 306-307,
- LRU IDENTIFICATION
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page C59
Config-2 Nov 01/08
TAI
**ON A/C 223-299, 308-309, 312-399, 401-499,
- GROUND SCANNING
(Ref. Fig. 032)
- TROUBLE SHOOTING DATA
(Ref. Fig. 033)
- CLASS 3 FAULTS
- GROUND REPORT
(Ref. Fig. 032)
- CURRENT STATUS
(Ref. Fig. 033)
- TEST
(Ref. Fig. 034)
R
EFF : 201-203, 211-211, 215-215, 219-299,
301-302, 306-309, 312-399, 401-499,
34-48-00
Page C60
Config-2 Nov 01/08
TAI
**ON A/C ALL
-------------------------------------------------------------------------------
| FAULT | EXAMPLE | REASON |
|-----------------------------------------------------------------------------|
| ARINC 429 | IRS BUS INACTIVE | No expected input labels received |
| Bus Fault | | for more than 4 s. |
|-----------------------------------------------------------------------------|
| ARINC 429 | FMGC LATITUDE | The SSM of the input data indicates|
| Signal Fault | FAILURE | Failure/Warning or the input label |
| | | is not meeting the required update |
| | | rate. |
|-----------------------------------------------------------------------------|
| Discrete | Flaps stuck down | For at least 60 s: |
| Input Faults | | - FLAPS are in landing configura- |
| | | tion through SFFC1 (GROUND |
| | | signal at GPWC FLAPS discrete |
| | | input) or FLAP MODE pushbutton |
| | | switch is selected OFF and |
| | | - AIRSPEED > 250 Kts and |
| | | - IN AIR and |
| | | - RADIO ALT VALID and |
| | | - AIRSPEED VALID. |
| |--------------------------------------------------------------|
| | Flaps stuck up | For at least 2 s: |
| | | - FLAPS are not in landing configu-|
| | | ration and FLAP MODE pushbutton |
| | | switch is in normal position |
| | | (not OFF) and |
| | | - RADIO ALT < = 100 ft. and |
| | | - MODE 4 TOO LOW FLAPS alert is |
| | | on. |
| |--------------------------------------------------------------|
| | Gear stuck down | For at least 60 s: |
| | | - GEAR is down through LGCIU1 and |
| | | - AIRSPEED > 290 Kts and |
| | | - IN AIR and |
| | | - RADIO ALT VALID and |
| | | - AIRSPEED VALID. |
| |--------------------------------------------------------------|
| | Gear stuck up | For at least 2 s: |
| | | - GEAR not down and |
| | | - RADIO ALT < = 100 ft. and |
R
EFF :
ALL 34-48-00
Page C61
Config-2 Nov 01/08
TAI
-------------------------------------------------------------------------------
| FAULT | EXAMPLE | REASON |
|-----------------------------------------------------------------------------|
| | | - MODE 4 TOO LOW GEAR alert is |
| | | on. |
-------------------------------------------------------------------------------
---------------------------------------------------------------------------
| Reported Internal Failures |
|-------------------------------------------------------------------------|
| MESSAGE | CLASS | ATA |
|-------------------------------------------------------------------------|
| GPWC (1WZ) | 1 | 34-48-34 |
| GPWC (1WZ) | 3 | 34-48-34 |
| WRG:PIN PROG/GPWC (1WZ) | 1 | 34-48-34 |
| CAPT/FO GPWS GS PB SW (4WZ/5WZ)/GPWC(1WZ) | 1 | 34-48-34 |
| FO GPWS GS PB SW (5WZ)/GPWC(1WZ) | 1 | 34-48-08 |
| ECP(6WT)/GPWC(1WZ) | 1 | 31-61-12 |
| GPWS SYS PB SW (9WZ)/GPWC (1WZ) | 1 | 34-48-08 |
| GPWS TERR PB SW (31WZ)/GPWC(1WZ) | 1 | 34-48-08 |
| GPWC(1WZ)/FWC1/2(1WW1/2)/WXR1/2(1SQ1/2) | 1 | 34-48-34 |
| CAPT TERR ON ND PB SW (30WZ1)/GPWC (1WZ) | 1 | 34-48-08 |
| FO TERR ON ND PB SW (30WZ2)/GPWC (1WZ) | 1 | 34-48-08 |
---------------------------------------------------------------------------
R
EFF :
ALL 34-48-00
Page C62
Config-2 Nov 01/08
TAI
(b) External failures
---------------------------------------------------------------------------
| Reported External Failures |
|-------------------------------------------------------------------------|
| MESSAGE | CLASS | ATA |
|-------------------------------------------------------------------------|
| GPWS FLP MODE PB SW (7WZ)/SFCC1(21CV)/GPWC(1WZ) | 1 | 34-48-08 |
| LGCIU1 (5GA1)/GPWC (1WZ) | 1 | 32-31-71 |
| CFDIU (1TW)/GPWC (1WZ) | 3 | 31-32-34 |
| RA1 (2SA1)/GPWC (1WZ) | 1 | 34-42-33 |
| ADIRU1 (1FP1)/GPWC (1WZ) | 1 | 34-12-34 |
| ADIRU1 (1FP1)/GPWC (1WZ) | 3 | 34-12-34 |
| ILS1 (2RT1)/GPWC (1WZ) | 1 | 34-36-31 |
| ILS1 (2RT1)/GPWC (1WZ) | 3 | 34-36-31 |
| FMGC1 (1CA1)/GPWC (1WZ) | 1 | 22-83-34 |
| FMGC1 (1CA1)/GPWC (1WZ) | 3 | 22-83-34 |
| FCU (3CA) BUS CP-L/GPWC (1WZ) | 1 | 22-81-12 |
| FCU (3CA) BUS CP-R/GPWC (1WZ) | 1 | 22-81-12 |
| WXR1 (1SQ1) BUS HAZARD/GPWC (1WZ) | 1 | 34-41-33 |
| WXR1 (1SQ1)/GPWC (1WZ) | 1 | 34-41-33 |
---------------------------------------------------------------------------
---------------------------------------------------------------------------
| Reported Internal Failures |
|-------------------------------------------------------------------------|
| MESSAGE | CLASS | ATA |
|-------------------------------------------------------------------------|
| GPWC (1WZ) | 1 | 34-48-34 |
| GPWC (1WZ) | 3 | 34-48-34 |
| WRG:PIN PROG/GPWC (1WZ) | 1 | 34-48-34 |
| CAPT/FO GPWS GS PB SW (4WZ/5WZ)/GPWC(1WZ) | 1 | 34-48-34 |
| FO GPWS GS PB SW (5WZ)/GPWC(1WZ) | 1 | 34-48-08 |
| ECP(6WT)/GPWC(1WZ) | 1 | 31-61-12 |
| GPWS SYS PB SW (9WZ)/GPWC (1WZ) | 1 | 34-48-08 |
| GPWS TERR PB SW (31WZ)/GPWC(1WZ) | 1 | 34-48-08 |
| GPWC(1WZ)/FWC1/2(1WW1/2)/WXR1/2(1SQ1/2) | 1 | 34-48-34 |
| CAPT TERR ON ND PB SW (30WZ1)/GPWC (1WZ) | 1 | 34-48-08 |
| FO TERR ON ND PB SW (30WZ2)/GPWC (1WZ) | 1 | 34-48-08 |
----------------------------------------------------------------------