Professional Documents
Culture Documents
Procedure Qualification Record PQR
Procedure Qualification Record PQR
AUTHORIZATION
Name Position Signature
Mohammed Aamir
Prepared by: Technical Manager
Farooqui
Approved by:
Contents
Procedure Qualification Record (PQR):
What is a Welding Procedure Specification (WPS)?
Procedure Qualification Record (PQR) Test Report
What information is must to be included in a PQR?
What are the test required for PQR Qualification?
Procedure Qualification Record Sample
Difference between WPS and PQR
Procedure Qualification Record (PQR):
Scope:
A Procedure Qualification Record (PQR) is a document that provides evidence that a welding
procedure produces welds that meet predetermined requirements. PQR is a step before the WPS.
A Procedure Qualification Record or PQR begins with the development of a preliminary welding
procedure specification (pWPS). pWPS outlines the welding variables that will be used during
welding based on practical experience of the welding engineer & welding electrode manufacturer
recommendations.
PQR is qualified by welding of a welding test coupon using this pWPS. based on the
This welded coupon is subjected to various tests (visual testing & Destructive & non-destructive
tests) to ensure that the welding made using this pWPS meets the minimum requirements as per
welding qualification code or standard requirements such as ASME Section IX, AWS D1.1
or ISO 15614-1.
If all the tests results are acceptable, Procedure Qualification Record (PQR) is considered to be
approved. A qualified Welding Procedure Specification (WPS) is drafted afterwards based on the
welding variables used for PQR welding.
PQR hence becomes evidence that the qualified WPS will result in acceptable weld quality.
Welding Procedure Specifications are important because they help to ensure that a given welding
job will be completed in a consistent manner every time to meet the quality requirements (to
meet mechanical properties). This promotes safety and quality while also reducing costs by
eliminating the need for trial-and-error welds.
The PQR test report will contain information on the welding parameters used, the weld metal
properties (tensile, yield, ductility, toughness, etc.), and the performance of the weld. This
information can be used to determine if a welding procedure is suitable for use in production.
The qualified Procedure Qualification Record (PQR) must include the following information:
date
-joint configuration
-Filler metals used, including electrode classification and diameter or wire size and gas type and
flow rate
All this information must be recorded on the PQR form in order to create an accurate record of
the welding procedure.
There are three tests required for PQR qualification as per ASME Section IX or AWS D1.1:
The first is a visual examination, which assesses the appearance of the weld. This
includes looking for any cracks, defects, or other imperfections.
The second is a non-destructive test, which uses X-rays or ultrasound to examine the
weld without damaging it.
Finally, there is a destructive test, which involves taking a sample of the weld and testing
it to see how well it holds up under stress. Mandatory destructive tests are Tensile Test &
bend test as per ASME Section IX & AWS D1.1.
Supplementary tests such as CVN test, hardness test, weld macro test & corrosion tests are also
used if required by client or specification.
The PQR must be prepared by the company designated Welding Engineer and shall be on
suggested form given in the code or standard.
1. Identification of the specification, code, or standard to which the PQR will be subjected.
Identification of base metals with chemical composition (weight %).
3. Welding process(es) used and electrode(s) classification and diameter or wire size and gas(es)
used including flow rates.
4. Current, voltage, travel speed (if applicable), and Amperes as measured with a volt-meter and
ammeter during welding.
5. Results of tests.
The main difference between the two documents is that WPS is a document that outlines the
specific procedures that will be used to weld a particular joint, while PQR is a document that
records the results of actually welding a joint using the specified procedures outlined in the WPS.
PQR is important because it provides evidence that the welding procedure specified in the WPS
can produce a sound weld.
Using a qualified WPS is important because it means that if a welder were to use the same WPS
to weld another joint, they would likely produce a sound weld as well.