Professional Documents
Culture Documents
SPECIFICATION
www.terex.com/ecotec
AGGRESSIVE
SLOW SPEED SHREDDER
The TDS 820 is an aggressive slow speed
TDS 820
Independent shredding
shredder suitable for all types of material. shafts allow for maximum
Customisable shredding programs allow application flexibility.
operators to configure the machine to their
specific requirements, reducing wrappage
and maximising production.
Key features include the hydrostatic The TDS 820 is powered by the following engines
drive offering better protection against dependent on geographic area and emission
contamination and allowing for regulations; Scania DC13 331kW (440HP) Stage V for
bi-directional shredding. The double shaft shredder EU, Scania DC13 331kW (440HP) Tier 4 Final for the
has 2m long shafts with a fully welded tooth USA and Scania DC13 371kW (497HP)
configuration, impressive throughput and excellent Stage IIIA Constant Speed for ROW.
reduction.
The machine is manoeuvred via a robust tracked
The independent gearboxes enable each shaft to undercarriage making it a great solution for difficult
be run separately helping to reduce wrappage and terrain.
improve the shredding of material.
02 03
KEY FEATURES Household
Waste
Bulky Waste Commerical
Waste
Waste Wood Tyres Green Waste Forestry
Waste
04 05
TECHNICAL DATA CUSTOMER SUPPORT
With you every step of the way
06 07
CAMPSIE DUNGANNON
Dealer Stamp:
Tel: +44 (0) 28 7122 3110 Tel: +44 (0) 28 8771 8500
NEWTON
22 Whittier Street
Newton, New Hampshire
USA, 03858
February 2021. The material in this document is for information only and is subject to change without notice. Terex Ecotec assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein.
Due to continual product development we reserve the right to change specifications without notice. Any product performance figures given in this brochure are for guidance purposes only. This information does not constitute an expressed or implied
warranty or guarantee, but shows text examples provided. These results will vary depending on product settings, screen media and sizes, feed source and types of material being processed. Photographs are for illustrative purposes only. Some or all of
the machines in the illustrations may be fitted with optional extra. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights reserved. Terex is a
registered trademark of Terex Corporation in the USA and many other countries © 2021 Terex Corporation.
www.terex.com/ecotec