Professional Documents
Culture Documents
IAT Division
Inspection is a series of checks carried out carefully or
direct examination of matters relating to the
implementation of certain duties and regulations by
client or government regulations. Besides inspection,
we also capable of doing factory audit, training and
sample picking to meet our client regulations.
Scope of Services
• Incoming Material Inspection
• During Production Inspection
• Final Random Inspection
• Factory Assessment Audit
• Social Accountability Audit
• Training Services
• Sample Picking Services
Scan to learn more about Head Office & Laboratory Marketing Office SURABAYA
PT Qualis Indonesia Komplek Ruko Section One Blok D-1, Kel.
Jl. Pajajaran No. 17 JAKARTA Kendangsasri, Kec. Tenggilis, Mejoyo 60292
Gandasari Kec. Jati Uwung Artha Gading Niaga Blok H No. 1-2 Telp: (031) 9984 8484
Tangerang, 15137 - Indonesia Kelapa Gading, Jakarta Utara 14240
Telp: (021) 5565 2583 Telp: (021) 4585 0885 MEDAN
Fax: (021) 5565 2489 Fax: (021) 4585 0661 Komplek MMTC Logistik Blok C-1
Jl. Selamat Ketaren - Percut Sei Tuan,
Deli Serdang 20223
Telp: (061) 6693 5950
Inspection
We offers one-stop service for quality control, including:
• Initial Production Inspection (IPI)* - this inspection takes place when approximately 10-20% of total order
quantity is produced.
• During Production Inspection (DPI)* - this inspection takes place when approximately 40-60% of total order
quantity is produced.
• Final Random Inspection (FRI) – a random inspection which is done when the products are 100% produced,
and at least 80% packed.
• Container loading/unloading supervision – the points during loading/unloading supervision: export cartons
conditions, shipping marks, products verification (a simple check and verify that the correct products type,
packing details, quantity and assortment conform to the requirements), check total shipment products
quantity, check container condition, monitoring the loading/unloading process, and ensures the proper
handling of your cargo.
* Depending on the product and the manufacturing process, the IPI or DPI may cover raw materials, partially
completed products, and/or finished products and their packaging. Production status is verified at this stage.