Professional Documents
Culture Documents
ADATA PCIe Gen3 SSD FW Update Guide - 20230201
ADATA PCIe Gen3 SSD FW Update Guide - 20230201
FW Update Guide
2023|02|01
Prepared by FAE
20 years of innovation
Make sure the BIOS setting is “AHCI mode” before start to
update the firmware.
20 years of innovation
The tool will detect the SSD automatically, then click update to execute it.
(If tool couldn’t find the SSD drive, please click search button as red mark.)
20 years of innovation
When tool pop up the message window, please select “Yes” (The PC will turn off
automatically), and please turn on PC manually.
※ When you turn on the PC manually, please wait for a while (about 1~2 minutes)
during POST.
20 years of innovation
After PC power on, it will show “FW Update Done”.
20 years of innovation
Please check SSD FW version to make sure FW version had been upgraded to
newest version.
20 years of innovation