Professional Documents
Culture Documents
2024
Ref.: GK/2790/03-24
MECHANICAL INSULATION
Project: Taif
B. Mineral-Fiber Blanket Thermal Insulation (Indoor Duct): Glass fibers bonded with a thermosetting resin complying with KIMMCO Glass wool Insulation is supplied without and with factory applied aluminum Foil / Scrim/
ASTM C 553, Type II, 24 kg/m³ density, thermal conductivity of 0.036 W/m oC max. at 24 oC, with factory-applied Foil Reinforced Comply as Proposed. Kraft paper (FSK) facing. FSK facing achieves water vapor permeance of 0.02 perms when tested as
Kraft (FRK) vapor barrier. Flexible glass fiber blanket insulation shall not be less than 25 mm thick. per ASTM E96 Dessicant Method and comply with ASTM C1136 requirements.
KIMMCO Glass Wool Acoustic Clean Liner (KCL) with Black Glass Fabric (BGF) is suitable for
use up to service temp 100 °C/212 °F and fiber / unfaced product can be used up to service temp of
232 °C/450 °F.
D. Duct Liner Acoustical Insulation: Shall be semi-rigid glass fiber boards faced with black woven glass fiber fabric (WGF) Comply as Proposed. KIMMCO Glass Wool Acoustic Clean Liner (KCL) is made from strong. Glass fibers bonded with a
conforming to FS HH-I-545B, Type I, 24 kg/m³ density. Thermal conductivity to be 0.036 W/m oC max. at 24 oC. Lining shall not be thermosetting resin comply with ASTM C1071 requirements.
less than 25 mm thick; duct sizes indicated shall be increased to compensate for the thickness of the lining.
KIMMCO Glass Wool Acoustic Clean Liner (KCL) with Black Glass Fabric (BGF) facing is
available in 24kg/m3 density with thickness of 25mm achieves thermal conductivity of 0.035 W/m. K
at 25 deg. C mean temperature.
KIMMCO Glass Wool Acoustic Clean Liner (KCL) with Black Glass Fabric (BGF) do not support
fungi/ mold growth and meet the requirement of Fungi resistance test when tested to ASTM C1338.
KIMMCO Glass Wool Acoustic Clean Liner (KCL) with Black Glass Fabric (BGF) is suitable for
use up to service temp 100 °C/212 °F and fiber / unfaced product can be used up to service temp of
232 °C/450 °F.
KIMMCO Glass wool Clean Liner (KCL) products are supplied with factory applied very strong and
dimensionally stable Black Glass Fabric (BGF) facing. BGF facing is very strong, durable, easy to
clean and fire safe which achieves ZERO fibre migration and protection against erosion.
KIMMCO Glass wool Insulation had tested at 52.5m/sec. (10,500 fpm) for an air velocity rating of
21m/sec. (4200 fpm) in accordance with UL 181 and found no evidence of continued erosion, and
does not show evidence of cracking, flaking, peeling or delamination.
KIMMCO Glass Wool Acoustic Clean Liner (KCL) with Black Glass Fabric (BGF) facing is
available in 24kg/m3 density with thickness of 25mm achieves Noise Reduction Coefficient (NRC) of
0.75 when tested as per ASTM C423.
Installation is not under KIMMCO's Scope.