Professional Documents
Culture Documents
EPO-MASTER 50
USES 02 Protective coating for concrete floorings and wall surfaces subject
to chemical attack and high mechanical stresses.
Can be used as screed for industrial floors.
Repairing mortar for concrete structure.
Filling of concrete cracks.
Grouting mortar under supports of machine and steel structures.
Bonding mortar for most of the building materials and fixing
dowels.
1 OF 4 EPO-MASTER 50
PRODUCT
INFORMATION 04 Base Epoxy
Coating ~ 1.11 Kg/l
Density
Mortar ~ 1.9 l/m3
Solid content By weight 100%
Color Transparent
PACKAGING
Total Package 1 Kg
Total Package 3 Kg
Total Package 10 Kg
SHELF-LIFE
STORAGE CONDITIONS
2 OF 4 EPO-MASTER 50
TECHNICAL
INFORMATION 05 ~ 0.25—0.4 Kg/m2/coat Primer coat
Consumption ~ 0.30 Kg/m2/coat Successive coats
~ 1.5 Kg/m2/5mm Topping mortars
Temperature resistance 90°CHumid 140°C Dry
Mortar (depends mainly on the mixing ratio between the epoxy resin
and the filling material).
MIXING
In the case of mortar, the filling material is added to the mixture and
mixed again for a period of 3 minutes.
3 OF 4 EPO-MASTER 50
It is recommended to prime the substrate with a layer of EPO-
MASTER 50 and the mortar to be laid while the primer is still wet, in
the case of using high filling material content.
APPLICATION
CLEANING OF TOOLS
Clean all tools and equipment immediately after use with QMC®
MASTER THINNER 5. Once hardened, the material can only be
removed mechanically. Wash soiled hands and skin thoroughly with
hot soapy water.
www.qmc.com.eg
4 OF 4 EPO-MASTER 50