Professional Documents
Culture Documents
Your Report
Q.3)
A. Anchor is lost
B. Anchor is sighted (Your Answer)
C. Let go anchor
D. Anchor is running out
A. Stock anchor
B. Stockless anchor (Correct Answer)
C. Kedge anchor (Your Answer)
D. Mushroom anchor
Q.7) Identify the Part No.5 in the picture from the below
answers
Q.10) Before proceeding out to sea on a long voyage anchors are secured using
A. Cement
B. Chain stopper
C. Swivel
D. Turnbuckle and wire lashing (Your Answer)
Q.12) Identify the Part No.1 in the picture from the below
answers
A. Head Rope
B. Forward Breast rope (Correct Answer)
C. Forward back spring
D. After Back spring (Your Answer)
Corre
ct
Q.16) Forward spring is used in mooring system to prevent the vessel from moving
A. Astern
B. Ahead (Correct Answer)
C. Athwartships direction
D. Away from the jetty (Your Answer)
Correct
Q.17) When lowering the tug rope to the tug, the crew must
Q.18) Bollard is a
A. Stanchion
B. For making fast mooring ropes/wires (Correct Answer)
C. Steel block (Your Answer)
D. Air pipe
Correct
Q.19)
A. Pea or Bill
B. Arm
C. Anchor Fluke (Your Answer)
D. Tripping Palm
Q.20)Identify part No 3
A. Hawse pipe
B. Spurling pipe
C. Warping drum (Correct Answer)
D. Windlass (Your Answer)
Q.21) Aft back spring is used to keep the vessel from moving
A. Ahead
B. Astern (Correct Answer)
C. Away from the jetty (Your Answer)
D. Athwart ship direction
Q.22) When a vessel is at anchor the bow stopper relieves the stress on the
Q.26) Fenders are placed on the shipside when coming alongside a jetty to protect the
Q.28)
Q.35)
A. Pea or Bill
B. Arm
C. Anchor Shank (Your Answer)
D. Tripping Palm
Correct
A. Heaving line
B. Rocket line (Your Answer)
C. Messenger line (Correct Answer)
D. Marking line
Correct
A. Head Rope
B. Forward Breast Rope
C. Forward Back Spring (Your Answer)
D. After Back Spring
Corre
ct
A. Head Rope
B. Forward Breast Rope
C. Forward Back Spring
D. After Back Spring (Your Answer)
Correct
Q.42)
A. Pea or Bill
B. Anchor Arm (Your Answer)
C. Fluke
D. Tripping Palm
Correct
Q.43) Breast rope is used in mooring system to prevent the vessel from moving
A. Ahead
B. Astern
C. Away from the jetty (Your Answer)
D. Fore and aft direction
Q.46) Identify the Part No.2 in the picture from the below
answers
Q.49) A merchant ship anchors in the anchorage waiting area when her
Q.53)
A. Pea or Bill
B. Arm
C. Fluke
D. Tripping Palm (Your Answer)
Q.54)
Q.55) Identify the Part No.4 in the picture from the below
answers
A. Shank
B. Swivel (Your Answer)
C. Arm
D. Anchor Chain/Link
Q.57) Identify the Part No.3 in the picture from the below
answers
A. Shank
B. Shackle (Correct Answer)
C. Arm
D. Anchor Chain/Link (Your Answer)
Q.60)Identify part No 1
A. Hawse pipe (Correct Answer)
B. Spurling pipe (Your Answer)
C. Warping drum
D. Windlass
A. Lead pipe
B. Vent pipe
C. Hawse pipe (Correct Answer)
D. Fair lead (Your Answer)
Q.62) The anchor wash valve provides wash water for the
A. Hawse pipe
B. Spurling pipe (Your Answer)
C. Warping drum
D. Clutch (Correct Answer)
Q.69) When the tug is pulling the ship, the ship’s crew should
Q.70) Communication between the bridge and the mooring station is conducted by
A. Intercode flags
B. Light signals (Your Answer)
C. Walkie Talkie (Correct Answer)
D. Hand signals
Q.72) In berth rat guards are placed on the ships mooring ropes to