Professional Documents
Culture Documents
1. when inspecting a Roller for wear and damage, one of the main things to look for that?
A. Bend and Flat spots B .It is painted
C. It looks clean D. Above All
7. when inspecting a wire rope for wear and damage, sellect All?
A. Kinks B. Birdcaging
C. Broken wire D. cuting
10. Reffer to graphic. What is the meaning of the hand signal shown?
A. Stop B. Swing
C. extend the boom D. Lower the load
11. Reffer to graphic. What is the meaning of the hand signal shown?
A. Stop B. Swing
C. extend the boom D. Lower the load
13. Inspction of Turnbuckle select All the correct option given below?
A. Bent chain B. Broken wires
C. Damage threads D. Bent and distortion
19. Reffer to graphic what is the name of the component indicated by the arrow?
A. Wire rope eye B. Thimble
C. D Shackle D. Bow shackle
21. Which drawing shown the best hitch arrengement for the load?
24. Turnbuckles……..?
A. Adjust the tension on a sling B. Lift heavy loads
C. Protect slings from sharp edges D. Lift two loads at the same time
28. At What height must a safety belt be worn when the is no woking platform?
A. 1.8Mtr(6FT) B. 16.5Mtr(30FT)
C. 11Mtr(20FT) D. 5.6Mtr(10FT)
29. Reffer to graphic which is the Pinch bar?
A) C B) A B
C) D D) B D.
31. Before any lifting operation is carried out the rigger must?
A. Check the load B. Barricade the area
C. Arrange fire extinguisher D.Inform the superintendent
37. Reffer to graphic. What is the meaning of the hand signal shown?
A. Stop B. Emergency stop
C. extend the boom D. Lower the load
38. Reffer to graphic. What is the meaning of the hand signal shown?
A. Stop B. Emergency stop
C. extend the boom D. Swing slow
41. If you "Turn" the load which type of hitch arrangement is correct?
42. In this Graphic what is " 1"
A. Boom B. Main hoist
C.Crawler D.A Frame
52. A lift plan states that a rigid load is rigged using a refer to graphic at 60 degrees with 5/8" dia wire rope
slings (6X37, IPS, IWRC). What is the capacity of the hitch arrangement shown?
A. 11960 B. 17940
C. 9750 D. 6900
53. A lift plan states that a rigid load is rigged using a refer to graphic at 60 degrees with 14Ton,Wire rope
slings (6X37, IPS, IWRC). What Diameter of sling is required for the load shown?
A. 1-1/8 B. 7/8
C. 1-1/4 D. 1
54. A lift plan states that a load is rigged using a refer to graphic at 30 degrees with 1/2" dia wire rope
slings (6X37, IPS, IWRC). What is the capacity of the hitch arrangement shown?
A. 4300 B. 6450
C. 8600 D. 6100
55. A lift plan states that a load is rigged using a refer to graphic at 30 degrees with 18900 LB, Wire rope
slings (6X37, IPS, IWRC). What Diameter of sling is required for the load shown?
A. 1-1/8 B. 1
C. 1-1/4 D. 7/8
56. A lift plan states that a load is rigged using a refer to graphic 7/8" dia wire rope slings (6X37, IPS,
IWRC). What is the capacity of the hitch arrangement shown?
A. 9750 B. 13000
C. 7312 D. 22500
57. A lift plan states that a load is rigged using a refer to graphic at 45 degrees with 3/4" dia wire rope
slings (6X37, IPS, IWRC). What is the capacity of the hitch arrangement shown?
A. 17866 B. 10050
C. 16450 D. 9500
58. A lift plan states that a load is rigged using a refer to graphic at 60 degrees with 7/8" dia wire rope
slings (6X37, IPS, IWRC). What is the capacity of the hitch arrangement shown?
A. 30000 B. 16875
C. 22500 D. 13000
59. A lift plan states that a load is rigged using a refer to graphic at 45 degrees with 12Ton, Wire rope
slings (6X37, IPS, IWRC). What Diameter of sling is required for the load shown?
A. 1-1/2 B. 1-3/4
C, 1-1/8 D. 1-1/4
60. A lift plan states that a load is rigged using a refer to graphic at 60 degrees with 3500LB, Wire rope
slings (6X37, IPS, IWRC). What Diameter of sling is required for the load shown?
A. 3/8 B. 1/2
C. 7/16 D.1-1/2
61. 7"(8000LBS) Nylon web sling the load capacity of the sling?
A. 15800Kg B. 36000Kg
C. 14363Kg D. 19000Kg
A. 3445 B. 15800
C. 17100 D. 12600
64. A lift plan states that a Flexible load is rigged using a refer to graphic at 60 degrees with 20,000LBS
wire rope slings (6X37, IPS, FC). What Diameter of sling is required for the load shown?
A. 3/4" B. 7/8"
C. 5/8" D. 1
65. A lift plan states that a load is rigged using a refer to graphic at 45 degrees with 3/4" dia wire rope
slings (6X37, IPS, Fc). What is the capacity of the hitch arrangement shown?
A. 16800 B. 12600
C. 15400 D. 9450
66. A lift plan states that a load is rigged using a refer to graphic at 60 degrees with 19,000LBS, Wire rope
slings (6X37, IPS,FC). What Diameter of sling is required for the load shown?
A. 5/8" B. 3/4"
c. 7/8" D. 1"
67. A lift plan states that a load is rigged using a refer to graphic at 60 degrees with 5/8"Dia, Wire rope
slings (6X37, IPS,FC). What is the capacity of the hitch arrangement shown?
A. 22200 B. 11100
C. 23900 D. 11950
68. A lift plan states that a load is rigged using a refer to graphic at 45 degrees with 16,000LBS, Wire rope
slings (6X37, IPS,FC). What Diameter of sling is required for the load shown?
A. 3/4" B. 7/8"
C. 5/8" D. 11/4"
69. A lift plan states that a load is rigged using a refer to graphic at 45 degrees with 13,000LBS,Nylon
Web slings (8000Lb). What Diameter of sling is required for the load shown?
A. 6" B. 8"
C. 5" D. 9"
70. A lift plan states that a load is rigged using a refer to graphic at 60 degrees with 16,000LBS, Nylon
Web slings (5000Lb). What Diameter of sling is required for the load shown?
A. 10" B. 8"
C. 7" D. 6"
C. Crawler D. Hoist
80. Refer to Graphic what kind of Damage to the sling is shown below
A. Broken wires B. Corrosion
C. Kinking D. Cutting
82. Refer to the graphic. What is the name of the equipment shown below?
A. Hook adjestmenter B. Eye adjestmenter
C. Turnbuckle D. Wire adjestmenter
84. Reffer to graphic. What is the meaning of the hand signal shown?
A. Raise the boom slowly B.Lower the boom
C.Raise the boom and lower the
D. raise the hoist
hoist
83. Refer to graphic. What is the name of the Equipment shown
A. Spreader beam B. Plate clamp
C. Chain hoist D. Beam clamp
Answers
Prepared by sagar chiliveri