KBE_MOT-ASM2020-Boech_A100_K0001 Version: 1.0 Pago: 177 [os-68)
M100 STARTER MOTOR
COMPONENT DESCRIPTION
Table of contents
4. Starter mot
41.4. Installation location,
4.2, Pin assignment.
1.3. Measured value
2.4. Check the power supply of the starter motor.
2.2. Check the cable hamess for disconnection,
2,3, Checking the cable hamess for short circuit
2.4. Check the cable hamess for shor circuit to ground.
2.5. Check the resistance of the starter motor.
3. MAN-cats®,
1 i mois,
1. Starter motor
The starter motor has the task of
initially turning the vehicle engine. The
starter motor is actuated via the engine
management control unit.
1.1, Installation locationKBE_MOT-ASN2020-Bosch_A100_K0001 Version: 1.0 Pago: 277 [o-68)
The starter motor is fitted on the warm side
of the engine.
Key
Number Designation
= M100 starter motor
1.2. Pin assignment
Key
Number Designation
[EB Signal output (terminal 85)
A Signal input (terminal 86)
1.3. Measured values
Alright are sil reserved by MAN Truck & Bus SE
updates, MAN Truck & Bus SE assumes no li
ity for any
ument. Before starting work
Observe the safety instructions,
arising in particulas
12sl up-to-date version ofthe documents being use
"dala that is nat up to date inthisKBE_MOT-ASN2020-Bosch_A100_K0001 Version: 1.0 Page: 377 [oo-68)
Technical data
Designation Setpoint value
Power supply 23-25.8V
2. Test recommendation
instruction is not followed, it could result in damage to the component or to other
objects.
Therefore:
+ Always use the latest MAN-cats® version.
+ Use a digital multimeter.
+ Use test adapter, item number 80,99641-6044,
2.1. Check the power supply of the starter motor
Measure the power supply between the required contacts as per the following table:
Designation Contact Setpoint value
Starter motor 8/30 23-25.8V
Ground Terminal 31
2.2, Check the cable harness for disconnection,
Measure the resistance of the wiring harness to the specified pins as follows:KBE_MOT-ASN2020-B08ch_/
Version: 1.0
Page: 47 [oo-68)
Designation
Starter motor
G100 battery
Starter motor
Ground
Starter motor
A142 engine
management
control unit
Starter motor
A142 engine
management
control unit
23
Contact
B/30
Batt +
31
Terminal 31
X2/46
X2133
Checking the cable harness for short circuit
Setpoint value
0-029
0-029
0-029
0-029
Measure the resistance between the required contacts of the cable harness as per the
following table:
Designation
Starter motor
Contact
30
Setpoint value
>1MQKBE_MOT-ASN2020-B08ch_/
Designation
Starter motor
Starter motor
Starter motor
Starter motor
Starter motor
Starter motor
Starter motor
Starter motor
Starter motor
Starter motor
Starter motor
2.4, Check the cable harness for short circuit to ground.
Contact
31
30
30
31
31
Setpoint value
>1MQ
>1MQ
>1MQ,
>1 MQ
>1 MQ
Measure the resistance between the cable harness plug and the vehicle ground in
accordance with the following table:KBE_MOT-ASN2020-B08ch_/
Version: 1.0
Page: 677 [oo-68)
Designation
Starter motor
Ground
Starter motor
Ground
Starter motor
Ground
Starter motor
Ground
Contact
B/30
Terminal 31
31
Terminal 31
Terminal 31
Terminal 31
2.5. Check the resistance of the starter motor.
Setpoint value
>1MaQ
<0.29
>1 Ma
>1 MQ
Measure the resistance between the required contacts in accordance with the following
table:
Designation Contact Setpoint value
Starter motor 1 13.60
Starter motor 2
3. MAN-cats®-ASN2020.B08ch J Version: 1.0 Page: 777 [os-68)
Check the current values for plausibility using the MAN-cats® menu item *Monitoring/Status
information*,