Professional Documents
Culture Documents
B124 COOLANT TEMPERATURE SENSOR - MOT-EDC17SCR-Bosch
B124 COOLANT TEMPERATURE SENSOR - MOT-EDC17SCR-Bosch
Table of contents
1. Coolant temperature sensor......................................................................................................................................1
1.1. Installation location............................................................................................................................................. 1
1.2. Pin assignment................................................................................................................................................... 2
1.3. Measured values................................................................................................................................................ 3
2. Test recommendation................................................................................................................................................ 3
2.1. Check the cable harness for disconnection,......................................................................................................3
2.2. Checking the cable harness for short circuit..................................................................................................... 4
2.3. Check the cable harness for short circuit to ground..........................................................................................4
2.4. Checking the resistance of the coolant temperature sensor............................................................................. 5
3. MAN-cats®................................................................................................................................................................ 6
© MAN Truck & Bus SE. All rights are strictly reserved by MAN Truck & Bus SE.
This document is not subject to periodic updates. MAN Truck & Bus SE assumes no liability for any
damages arising in particular from data that is not up to date in this document. Before starting work,
ensure that the most up-to-date version of the document is being used. Observe the safety instructions.
KBE_MOT-EDC17SCR-Bosch_B124_K0001 Version: 1.0 Page: 2/6 [en-GB]
Key
Number Designation
Key
Number Designation
2 Not assigned
3 Signal ground
4 Not assigned
© MAN Truck & Bus SE. All rights are strictly reserved by MAN Truck & Bus SE.
This document is not subject to periodic updates. MAN Truck & Bus SE assumes no liability for any
damages arising in particular from data that is not up to date in this document. Before starting work,
ensure that the most up-to-date version of the document is being used. Observe the safety instructions.
KBE_MOT-EDC17SCR-Bosch_B124_K0001 Version: 1.0 Page: 3/6 [en-GB]
Technical data
2. Test recommendation
NOTE
If this instruction is not followed, it could result in damage to the component or to other
objects.
Therefore:
• Always use the latest MAN-cats® version.
• Use a digital multimeter.
• Use test device EDC17/EGC4, item number 80.99641-6070.
• Use test adapter, item number 80.99641-6044.
Measure the resistance between the required contacts in accordance with the following
table:
Coolant 1 0 – 0.2 Ω
temperature sensor
© MAN Truck & Bus SE. All rights are strictly reserved by MAN Truck & Bus SE.
This document is not subject to periodic updates. MAN Truck & Bus SE assumes no liability for any
damages arising in particular from data that is not up to date in this document. Before starting work,
ensure that the most up-to-date version of the document is being used. Observe the safety instructions.
KBE_MOT-EDC17SCR-Bosch_B124_K0001 Version: 1.0 Page: 4/6 [en-GB]
Coolant 3 0 – 0.2 Ω
temperature sensor
Measure the resistance between the required contacts in accordance with the following
table:
Measure the resistance between the required contacts in accordance with the following
table:
© MAN Truck & Bus SE. All rights are strictly reserved by MAN Truck & Bus SE.
This document is not subject to periodic updates. MAN Truck & Bus SE assumes no liability for any
damages arising in particular from data that is not up to date in this document. Before starting work,
ensure that the most up-to-date version of the document is being used. Observe the safety instructions.
KBE_MOT-EDC17SCR-Bosch_B124_K0001 Version: 1.0 Page: 5/6 [en-GB]
Coolant 1 >1 MΩ
temperature sensor
Ground Terminal 31
Coolant 3 >1 MΩ
temperature sensor
Ground Terminal 31
Measure the resistance between the required contacts in accordance with the following
table:
0°C 5.9 kΩ
20°C 2.5 kΩ
40°C 1.175 kΩ
60°C 595 Ω
© MAN Truck & Bus SE. All rights are strictly reserved by MAN Truck & Bus SE.
This document is not subject to periodic updates. MAN Truck & Bus SE assumes no liability for any
damages arising in particular from data that is not up to date in this document. Before starting work,
ensure that the most up-to-date version of the document is being used. Observe the safety instructions.
KBE_MOT-EDC17SCR-Bosch_B124_K0001 Version: 1.0 Page: 6/6 [en-GB]
80°C 320 Ω
100°C 185 Ω
120°C 110 Ω
3. MAN-cats®
*MOT-EDC17SCR-Bosch-Monitoring Temperatures*
© MAN Truck & Bus SE. All rights are strictly reserved by MAN Truck & Bus SE.
This document is not subject to periodic updates. MAN Truck & Bus SE assumes no liability for any
damages arising in particular from data that is not up to date in this document. Before starting work,
ensure that the most up-to-date version of the document is being used. Observe the safety instructions.