Professional Documents
Culture Documents
1 2
NG
Engine Coolant
(a) Disconnect the E2 engine coolant temperature sensor
Temperature Sensor connector.
ECM
(b) Connect the terminals THW and E2 of the E3 ECM con-
E2
THW nector.
HINT:
Before checking, do a visual and contact pressure check on the
E2 ECM connector.
(c) Turn the ignition switch ON.
A84871 (d) Select the item ”DIAGNOSIS / ENHANCED OBD II /
DATA LIST / ALL / COOLANT TEMP” and read its value
displayed on the hand–held tester or the OBD II scan tool.
E3 Temperature value: 140°C (284°F) or more
(e) Reconnect the engine coolant temperature sensor con-
nector.
NG