Professional Documents
Culture Documents
Features
• Cross-linked polyolefin
• Shrink Ratio 2 : 1
• Operating temperature – 55 to 125°C
• Excellent flame retardance VW-1
• Colours – Standard colours, green/ yellow stripe and clear
• Minimum shrink temperature 70°C
• 600V
• Black – UV Stable
Applications
• Quick recovery at low temperatures makes it ideal for use in electronics
and telecommunication applications
• RoHS coupled to flame retardant properties makes this product suitable
for use in automotive harnesses
• Ships, trains and underground mining
• Any enclosed areas which contain sensitive electronic equipment and
computers
Features
• Shrink Ratio 3 : 1
• Operating temperature – 55 to 110°C
• Excellent impact and abrasion resistance
• Excellent environmental and UV resistance
• High electrical insulation properties
• Colours – Black
• Minimum full recovery temperature 120°C
Applications
• Inner and outer sleeves for joints from 1 kV to 36 kV
• Strain relief/protection of connector components
• Water proofing of cable and wire harnesses
• Encapsulation and weatherproofing of irregular shapes
• Cable sheath repairs.
Features
• Wall thickness – 2.4mm to 4.5mm
• Shrink ratio 3 : 1
• Operating temperature – 55 to 110°C
• Excellent impact and abrasion resistance
• Excellent environmental and UV resistance
• High electrical insulation properties
• Colours – Black
• Minimum full recovery temperature 120°C
Applications
• Inner and outer sleeves for joints from 1 kV to 36 kV
• Installations where severe mechanical protection is required.
• Borehole/submersible pump joints that may be exposed to high water
pressure.
• Encapsulating, water and weather proofing of cables and pipes.
Features
• Shrink Ratio 3 : 1
• Operating temperature – 55° to 110°C
• Excellent impact and abrasion resistance
• Excellent environmental crack and UV resistance
• Hot melt ensures an excellent water seal
• High electrical insulation properties
• Colour – Black
• Minimum shrink temperature 120°C
Applications
• Voltage Range – 600/1000V
• Easy and quick installation
• Normal and submersible joints
• Suitable for 2 to 4 core PVC SWA cables
• ALVSJ – Submersible
• ALVJB – Budget (no roll springs and braid)
Description
• ALB Cable breakout boots (inner coated with hot melt adhesive)
are manufactured from crosslinked polyolefin & have been
designed to offer excellent sealing & insulating properties when
used on a cable crutch.
Features
• Excellent UV & environmental resistance
• Adhesive lining offers reliable sealing properties
• Excellent electrical & mechanical properties
• Abrasion resistance
• Available in 2, 3, 4, 5 & 6 cores
Features
• Torque controlled shear off bolts guarantee excellent electrical
connection
• Suitable for a wide range of applications and accommodate most
types of conductors, shapes and materials
• Installation requires no expensive crimp tools, standard socket or
wrench is suitable (hex bolts)
• Solid palm (no inspection hole) eliminates ingress of moisture
Grooved inner barrel contact surface compliments shear bolt
action to ensure good electrical connection
• Once bolt has been sheared it cannot be removed
• Complies to IEC 61238-1 class A & B, BS EN 50483-6 : 2009
Applications
• Suitable for use on low and medium voltage joints and
terminations
• Available Sizes:
Style: PILC • 16-35
• 50-95
• 120-185
• 240-300
Features
• Superior resistance to UV and weathering
Style: XLPE • Covers a wide range of sizes
• Unlimited shelf life
• Excellent sealing capabilities
• Enhanced electrical, environmental & mechanical performance
• Well illustrated instruction manual
• All kits suitable for armoured and unarmoured cables
• Available Sizes:
• 16-35
• 50-95
• 120-185
• 240-300
131
SCREENED CONNECTORS
Features
• Every connector is suitably tested and QC passed prior to dispatch
(AC withstand and partial discharge)
• EPDM for increased safety
• Cable adaptor manufactured of stress reducing material to balance
the electric field at the cable crossing
• Meet the requirements of standard IEC 60502.
• KEMA Report No. 70951914-TDT09-72776A
• T-body allows for a cost effective upgrade if required, fit rear
connector only
• Available Sizes:
• 35
• 50-70
• 95-120
• 150-185
• 240-300
Features
• Shrink Ratio 2.5 : 1
• Operating temperature – 55 to 105°C
• UV stable
• Environmental seal
• Colour – Black
• Minimum shrink temperature 110°C
Applications
• Semi-conductive breakout boots provide effective conductive
screen and sealing protection to cable terminations up to 36kV
• Available Sizes:
• 60/24 (body) - 25/8 (finger)
• 80/36 (body) - 35/11 (finger)
• 95/38 (body) - 35/11 (finger)
• 110/50 (body) - 46/18 (finger)
• 125/55 (body) - 55/20 (finger)
• 140/68 (body) - 62/26 (finger)
132
ANTI-TRACK TUBING 36kV
Features
• Shrink Ratio 3 : 1
• Halogen Free
• High creep resistance and anti-tracking properties
• Colour — Red/Brown
• Minimum shrink temperature 110°C
Applications
• Indoor and Outdoor terminations up to 36 kV
• Indoor and Outdoor Medium voltage switchgear
• Medium Voltage Busbar Insulation
• Available Sizes:
• 30/10
• 38/12
• 49/16
• 55/18
• 65/21
• 76/38
Features
• Shrink Ratio minimum 2 : 1
• Good weatherability
• Excellent tracking and ageing resistance
• Colour — Red/Brown
• Weather resistant mastic layer
• Minimum shrink temperature 110°C
Applications
• Outdoor Medium Voltage cable terminations
• Available Sizes:
• 35/12
• 48/20
• 60/20
• 75/30
• 100/35
133
SILICON BUSHING BOOTS
Features
• Simple and easy to install
• Unique bushing adaptor/connection provides superior moisture
ingress protection
• Outstanding resistance to weathering and tracking
• Extended shelf life
• Meets IEC60502-4 and GB12706.4-2002 standards
• Easy to remove and re-install
• No specialised tools required
• Immediate energizing after installation
• Code: CSB1
Features
• Quick and easy to install
• Easy to remove and re-install
• No specialized tools required
• Compact profile provides for greater air clearances (P-P & P-E)
• In accordance with requirements of NRS012 / NRS053
• Non tracking elastomeric housing offers excellent erosion
resistance, dielectric properties and environmental resistance
• No slip/slide off the Type “C” bushings once installed
• Suitable to be used with all indoor terminations
• Accommodates bulky torque shear lugs
• Code: AUSSC
134
CONDUCTIVE BREAKOUT BOOTS
Features
• UV resistant
• Resistance to harsh weather and environmental conditions
• Red mastic inner lining offers reliable protection against moisture
ingress
• Anti-tracking properties
• Minimum recovery temperature 110°C
• Available Sizes:
• 80/34 (straight)
• 80/58 (straight)
• 140/90 (straight)
• 80/35 (angled)
• 80/50 (angled)
• 95/70 (angled)
• 145/68 (angled)
Features
• Flexible to ensure ease of installation
• Shrink Ratio 2.5:1
• Excellent tracking resistance & insulation
• Halogen Free
• Superior resistance to UV and weather conditions
• Colours – Red
• Minimum fully recovered shrink Temperature, 120 °C
Applications
• Suitable for applications in LV and MV(36kV) switchgear and
electrical equipment
• Available Sizes:
• 25/10
• 40/16
• 65/25
• 75/25
• 95/30
• 125/40
• 180/58
135
BUSBAR TAPE
Features
• Shrink Ratio 30%
• Operating temperature -55 to 105°C
• Colours – Red
• Minimum fully recovered shrink temperature, 100°C
• Very flexible for ease of installation
• Excellent tracking resistance & insulation properties.
• Superior resistance to UV and weathering
Applications
• Busbar insulation for LV of MV applications
• Available Sizes:
• 25mm
• 50mm
• 100mm
Features
• Suitable for voltage up to 35kV
• Prevent tapping by hooking and other means
• Excellent UV and abrasion resistance properties resulting in
outstanding resistance to weathering (harsh environments)
• Erosion and tracking resistant
• Quick and easy installation
• Installation on live installation by means of specially designed tools
• Red mastic sealant available for improved performance
• Colours – red / yellow / green / black
• Available Sizes:
• 14/18/20/28/38mm
136
HOT MELT TAPES
Features
• Excellent environmental seal
• RoHS compliant
• Halogen Free
• Clear / transparent colour
Applications
• Suitable for use with heatshrink and moulds
• Any application that requires sealing against moisture and dust
• Available Sizes:
• 25mm
• 50mm
• 100mm
Features
• Sealing, insulating & waterproofing
• Water, ozone & corona resistant
• Suitable for use in HV & MV applications
• High dielectric strength
• Forms stable, long lasting joint
• Excellent UV resistance
• For in & outdoor applications
Applications
• Waterproofing of power cable joints
• Corrosion protection if wrapped onto metal pipes
• Temporary repairs to waterhose and pipe leaks
• Soft non-slip handgrip in sports racquets and bicycles
• Available Sizes:
• 25mm
• 50mm
• 100mm
137
RUBBER BASED MASTIC TAPE
Mastic Tape MT
AYSM
• Yellow stress relief void filling mastic is used on connectors and at
screen cuts when doing medium voltage(MV) joints and
termination installations.
• Features include excellent adhesive and sealing capabilities,
weather resistance, anti-aging, mildew, chemical resistance and
excellent dielectric properties.
• Available Sizes: 25x150mm & 25x500mm
ARAM
• Red anti-track mastic is used in MV termination installations to
ensure a watertight seal on breakout boots, anti-track tubing and
on lugs.
• Features include excellent adhesive and sealing capabilities,
weather resistance, anti-aging, mildew, chemical resistance and
excellent dielectric properties.
• Available Sizes: 25x500mm & 30x1000mm
Features
• Excellent self amalgamating and sealing properties
• Easy filling of irregular shapes
• Suitable for use up to 600V
• Soft and pliable
• Non corrosive with good ageing properties
Applications
• Moisture block in LV heatshrink joints
• Preventing moisture from entering MV joints and terminations
• Available Size:
• 38mmx1500mm
• Code: ABFMR1500
138
END CAPS & CABLE REPAIR SLEEVES
Features
• Shrink Ratio 2 : 1
• Operating temperature – 55 to 110°C
• UV stable
• Flexible water seal
• Colour – Black
• Shrink temperature 120°C
• Adhesive lined
Applications
• Sealing ends of power and telecom cables
• Capping of hydraulic and pneumatic tubes to prevent ingress of
both dust and moisture
• Available Sizes:
• 14/5
• 25/8
• 40/15
• 55/26
• 75/36
• 100/50
• 120/60
• 145/60
Features
• Shrink Ratio 3 : 1
• Thermochromic heat activated paint
• Operating temperature – 35 to 105°C
• Excellent impact and abrasion resistance
• Excellent environmental crack and UV resistance
• Colour – Black
• Minimum shrink temperature 120°C
Applications
• Permanent sheath repairs on both power and telecom cables
• Temporary repairs to low pressure gas lines
• Temporary repairs to low pressure water and sewerage pipes
• Available Sizes:
• 50/15
• 75/22
• 105/30
• 146/38
• 188/55
139