The document contains G-code instructions for cutting a part using an 8mm endmill. It describes toolpaths for profiling one side of the part and pocketing. The material size is 550mm x 850mm x 18mm. The G-code instructions move the tool along complex paths with varying depths from 0 to -14.4mm to remove material from the workpiece.
The document contains G-code instructions for cutting a part using an 8mm endmill. It describes toolpaths for profiling one side of the part and pocketing. The material size is 550mm x 850mm x 18mm. The G-code instructions move the tool along complex paths with varying depths from 0 to -14.4mm to remove material from the workpiece.
The document contains G-code instructions for cutting a part using an 8mm endmill. It describes toolpaths for profiling one side of the part and pocketing. The material size is 550mm x 850mm x 18mm. The G-code instructions move the tool along complex paths with varying depths from 0 to -14.4mm to remove material from the workpiece.