The document contains G-code instructions for machining an interior profile on one side of a material using a 4mm endmill. It specifies toolpaths and tool information for profiling pockets and contours to depths of 3.64mm, 7.28mm, 10.92mm, and 14.56mm over two sections of the material from X=0.000 to X=452.746 and back.
Original Description:
Original Title
Perfilado inteior LADO A - fresa 4mm - izqInferior
The document contains G-code instructions for machining an interior profile on one side of a material using a 4mm endmill. It specifies toolpaths and tool information for profiling pockets and contours to depths of 3.64mm, 7.28mm, 10.92mm, and 14.56mm over two sections of the material from X=0.000 to X=452.746 and back.
The document contains G-code instructions for machining an interior profile on one side of a material using a 4mm endmill. It specifies toolpaths and tool information for profiling pockets and contours to depths of 3.64mm, 7.28mm, 10.92mm, and 14.56mm over two sections of the material from X=0.000 to X=452.746 and back.