This document contains G-code instructions for machining the interior profile of a part using a 4mm endmill. It describes toolpaths for cutting nested pockets to a depth of 18mm in two locations along the X axis of a 550mm x 850mm x 18mm material block. The toolpaths involve contour cutting, pocketing operations, and ramping between depths using spiral and linear interpolation moves.
Original Description:
Original Title
Perfilado inteior LADO B - fresa 4mm - izqInferior
This document contains G-code instructions for machining the interior profile of a part using a 4mm endmill. It describes toolpaths for cutting nested pockets to a depth of 18mm in two locations along the X axis of a 550mm x 850mm x 18mm material block. The toolpaths involve contour cutting, pocketing operations, and ramping between depths using spiral and linear interpolation moves.
This document contains G-code instructions for machining the interior profile of a part using a 4mm endmill. It describes toolpaths for cutting nested pockets to a depth of 18mm in two locations along the X axis of a 550mm x 850mm x 18mm material block. The toolpaths involve contour cutting, pocketing operations, and ramping between depths using spiral and linear interpolation moves.