Professional Documents
Culture Documents
papers
An integrated approach for efficient biomethane production from solid bio-wastes in a compact
system
2015 / Haoyu Wang, Yu Tao, Margarida Temudo, Margot Schooneveld, Henk Bijl, et al.
Preparation and CO2 adsorption of amine modified Mg–Al LDH via exfoliation route
Abstract In response to the recent focus on reducing carbon dioxide emission, the
preparation and characterization of organically functionalized materials for use in carbon
capture have received considerable attention. In this paper the synthesis of ...
Upgrading wet granulation monitoring from hand squeeze test to mixing torque rheometry
2013 / Marco S. Lucas, Manuel Algarra, José Jiménez-Jiménez, Enrique Rodríguez-Castellón, José
A. Peres
Comparison of Downer and Riser Flows in a Circulating Bed by Means of Optical Fiber Probe
Signals Measurements
Abstract In this work, the riser (2.42 m high) and downer (0,85 m high) sections with an
ID of 82mm in both, were analyzed to study the temporal fluid dynamics properties of a
circulating bed system in terms of electrical signals of particles...
Spiral microchannel with rectangular and trapezoidal cross-sections for size based particle
separation
2013 / Guofeng Guan, Lidan Wu, Ali Asgar Bhagat, Zirui Li, Peter C. Y. Chen, et al.
The Adsorption of CHS-1 Resin for Cr (VI) of Low Concentration from Electroplating Wastewater
Abstract The adsorption property of CHS-1 resin for Cr (VI) was investigated by
chemical analysis. Experiment results show that CHS-1 resin has the best adsorption
ability for Cr (VI) at pH=2-3. The exchange adsorption rate of the resin for Cr (VI)...
Variation of Oxygen Transfer along the Rectangular Weir Crest Distance of Wastewater
Treatment Pond
Abstract Community, instead of industrial factories, has been identified as a big point
sources for wastewater in which it also spread out around the Kingdom of Thailand. The
government inverted to settle wastewater treatment plants to recover them...
Experimental study of cake formation on heat treated and membrane coated needle felts in a
pilot scale pulse jet bag filter using optical in-situ cake height measurement
Abstract Pulse-jet bag filters are frequently employed for particle removal from off gases.
Separated solids form a layer on the permeable filter media called filter cake. The cake is
responsible for increasing pressure drop. Therefore, the cake has ...
2011 / Mahmood Saleem, Rafi Ullah Khan, M. Suleman Tahir, Gernot Krammer
Abstract The role of yhjX, a predicted major facilitator superfamily protein, was
examined in context of E. coli response to 1,4-butanediol (1,4-BDO). E. coli DH1 and
MG1655, two commonly used metabolic engineering hosts, were both sensitive to the...
2013 / Heather L Szmidt-Middleton, Mario Ouellet, Paul D Adams, Jay D Keasling, Aindrila
Mukhopadhyay
2009 / Sepideh Ziaii, Stuart Cohen, Gary T. Rochelle, Thomas F. Edgar, Michael E. Webber
Performance analysis of the cold flow model of a second generation chemical looping
combustion reactor system
Abstract A 150 kWth second generation chemical looping combustion reactor system has
been designed. It is a double loop circulating fluidized bed meant to achieve high solids
circulation and be flexible in operation. Attention was also focused on...
2011 / Aldo Bischi, Øyvind Langørgen, Jean-Xavier Morin, Jørn Bakken, Masoud Ghorbaniyan, et
al.
Abstract The structure of wall pressure fluctuations beneath a turbulent boundary layer
interacting with a normal shock wave is investigated through direct numerical simulation
(DNS). In the zeropressure-gradient (ZPG) region upstream of the...