3042 WRB
JAW CRUSHER
\
es
Illustrations are representative only and may not
appear identical ta the actual unt. A varioty of Jaw
plates may be available for your crusher. The original
Jaw shipped in the crusher will be marked in the
Quantity required column. Refer to the descriptions for
‘other options available. Pitman wedges may vary with
the selection of jaw plates. Be sure to check this isting
when ordering jaw plates. identical type stator
movable jaws must be used at all times. All
reversible and may be tured for prolonged life. A
variety of togale plate lengths are available subject {0
crusher requirements. Safety first — see maintenance
) hee instructions
Ref: BM:C524-134D UNIVERSAL ENGINEERING CORPORATION, CEDAR RAPIDS, IOWA 52405
Sec: 100-3042
‘Subsidiary, the Pettibone Corporation, Chicago
Ten | arr
NO. [#e00.| parr myuoen | ___pescateion
1] J [8824-13 | Stationary Corrugated Jaw
Plate ~ 2%" Pitch —
Straight
i 8524-102 | Stationary Corrugated Jaw
Plate ~ Heavy Duty —
6" Pitch
i 8524-124 | Stationary Corrugated Jaw
Plate ~ Extra Heavy Duty
2 | 7 [B824-14 | Movable Corrugated Jaw
| rele Serene
L Straight 7
2 | [824-108 | Movable Corrugated Jaw
Plate — Heavy Duty
6" Pitch |
2 | [8824-128 | Movablo Corrugated Jaw
Plate — Extra Hoavy Duty |
3 [7 [3524-70 | Piiman Wedge — Center
3 [1 [asea-870 | Pitman Wedge — Left
3 | 1 [524-870 | Pitman Wedge — Right
4 C524-A91 Toggle Plate 24%"
SO) _| G54" Openings) _
@ [7 | c824-881 | Toosle Plate 21%"
G8" Openings)
& | 2 | A6a0-A7 | Tension tod Pin
[re 9 [gr x2 Tension Rod Cotter Pin
7 Oscillating Collar
N/S|_2 |A489-31 | Tension Rod Saddle
7 [2 ‘Complete Standard
|" Tenalon Rod Assy, Eco, +
“ie | 7 | As24-A65 | + Tension Rod
19 | 1 [ase4-96 | + Spring Collar a
20] 1 fer-10 [+ Spring =|
21 | 1 [Asa«-07 [+ Spring Colar
ze | 2 | 1y'-7wo2 | +Tension Rod Note
23 1 [B258~A/E Flywheel R.H.
24 | 1 [pore 9/3 | Flywheol LH,
nis| 4 |gzez7-£2 | Counter Weights
Page 5