Professional Documents
Culture Documents
TECHNICAL INFORMATION
For your information the below mentioned procedures should be carried out when
ever you are programming new keys for the M139 Quattroporte.
Important: Before you begin the procedure, be sure to have all keys on hand.
Any key left out will no longer function. Second, be sure to have the electronic
key code card from the vehicles pouch.
IMPORTANT!
Once complete with the steps on SD3 remove the key from the ignition and
close all the doors (trunk and hood included). Wait 15 min for the vehicle’s
CAN bus to go to sleep as indicated by the CD-changer lights and the NQS
lights going out. Once asleep the remote part of the keys (alarm system) will
now function and the reprogramming will be complete.