Professional Documents
Culture Documents
WORK TOOLS
17
Edition 40 17-1
Hydraulic Features
Hammers
HYDRAULIC HAMMERS
H35D S-H65D S Hammer Features: H70-H100 Hammer Features:
● One Piece Body results in reduced hammer com- ● Low Pressure Accumulator provides the energy
ponents, which minimizes service time required. for the piston power stroke.
● Tubular Accumulator eliminates accumulator ● Custom Side Plates designed for Cat carrier geom-
retention screws, which improves hammer efficiency etry. Protects power cell. Allows for complete folding
while simplifying maintenance. of the boom on side-shift backhoes.
● Distributor provides high oil volume for greater ● High Pressure Accumulator dampens pres-
blow frequency. sure peaks and pulsation, thus protecting carrier
hydraulic system. Recovers rebound energy in
● Pressure Adjusting Valve (PAV) assures that all hard material for greater impact power.
blows are delivered at a constant blow energy.
● Distributor has high oil volume for ultra high
● Long Heavy Piston delivers maximum impact blow frequency.
energy and minimizes recoil forces to carrier.
● Pressure Adjusting Valve assures that all blows
● Replaceable Piston Sleeve reduces the cost to are delivered at a constant blow energy.
repair in event of catastrophic failure, simplifies
serviceability. ● Long Heavy Piston delivers maximum impact
energy and minimizes recoil forces to carrier.
● Shock Isolation feature significantly reduces
shock loads transferred to the machine during ● Long Front End ensures proper piston — tool
hammer operation, improve operator comfort and alignment.
extend life of critical machine components.
● Slip Fit Thrust Ring dissipates harmful shock
● Round Tool Retaining Pin with Locking Mech- loads in abusive applications and is rotatable for
anism means no loose parts when changing tool. additional life.
● Single Piece Upper & Lower Tool Bushing ● Slip Fit Upper Tool Bushing is rotatable for
with Integral Tool Stop simplifies product additional life and provides positive tool alignment.
maintenance by allowing field replacement of all
tool wear components. ● Slip Fit Lower Tool Bushing provides positive
tool alignment, is field replaceable and rotatable.
● Dust Seal helps prevent foreign material from Grease retention grooves provide extended lubri-
entering the housing, which reduces the wear on cation and wear indication.
the power cell and other major components.
● Dust Seal helps prevent foreign material from
● Sound Suppressed version is standard for all entering the housing, which reduces the wear on
D series small hammer models. the power cell and other major components.
● Sound Suppressed versions available for all
models.
17-2 Edition 40
Features Hydraulic
Applications Hammers
● Slip Fit Thrust Ring dissipates shock loads in ● Trenching/Primary Excavation — In soft or lay-
abusive applications and is rotatable for longer life. ered materials, the hydraulic hammer with a moil
or chisel point is an effective tool in excavation.
● Plastic Wear Plates on all four sides guide the
power cell within the housing. ● Direct Quarrying — In many types of limestone,
direct quarrying with hydraulic hammers can
● Blank Fire Protection aided by auto-shutoff prove cost effective, especially where blasting is
stops operation when no material is present to be prohibited or restricted.
broken. It increases hammer reliability and dura-
bility by eliminating high stress resulting from A hammer need not be full time attachment for
blank firing. (Available only in D-series models.) these applications. It can be replaced by a bucket in
a short time, allowing the machine to be used for dig-
● Slip Fit Upper Tool Bushing is rotatable for ging, loading, lifting, or other tasks.
longer life and is replaceable. Guides the tool to
optimize in-line piston/tool contact. Consult your Cat dealer for advice on correct siz-
ing, installation and tool selection.
● Slip Fit Sealed Lower Tool Bushing provides
positive tool alignment, is field replaceable and
rotatable. It has grease retention grooves for
extended lubrication and wear indication.
● Sound Suppression consists of housing damp-
ening material, plugs and covers.
● Autolube available for all hammers.
17
NOTE: Internal components of hammers are machined to close tolerances and require clean oil with full lubricating properties. When operating in high ambient tempera-
tures or extreme temperature applications (e.g. foundries), higher viscosities are recommended to extend hammer life and improve performance. Hammers tend
to shear multigrade mineral oil so that oil viscosity decreases. Contamination, water in oil, and decreased viscosity lead to earlier oil deterioration and the need for
more frequent oil changes than normally recommended for the excavator. Extra care should be taken to avoid the entry of dust or dirt when installing or removing
a hammer in the field.
Edition 40 17-3
Hydraulic Tool Selection
Hammers
H120C S
H140D S
H160D S
H180D S
H35D S
H45D S
H55D S
H65D S
H90C S
H100 S
H115 S
H130 S
H70 S
H90C
H100
H70
1. Roadbuilding/Construction
Breaking of road surface C,M,S C,M,S C,M,S C,M,S C,M,S C,M,S C,M,S C,M,P,S C,M,P C,M,P C,M,P C,M,P C,M,P
Breaking uneven bedrock to lay a road C,M C,M,P C,M,P C,M,P C,M,P C,M,P C,M,P
Primary breaking to prepare road bed C,M,P C,M,P C,M,P
Asphalt cutting to shape or area C,S C,S C,S C,S C,S C,S C,S
Trench excavation for drainage C,M C,M C,M C,M,P C,M,P C,M,P C,M,P C,M,P C,M,P
Demolition of bridges C,M C,M C,M C,M C,M C,M C,M B,C,M,P B,C,M,P B,C,M,P B,C,M,P B,C,M,P B,C,M,P
Heavily reinforced bridge pillars B B B
Compacting soils CP CP CP CP CP
Making holes (for traffic signs, lamp posts) M M M M M M M M M M M M M
Breaking of frozen ground C,M,S C,M,S C,M,S C,M,S C,M,S C,M,S C,M,S C,M,P,S C,M,P C,M,P C,M,P C,M,P C,M,P
2. Demolition/housing development
Demolition of concrete walls, roofs, floors C,M C,M C,M C,M C,M C,M C,M B,C,M,P B,C,M,P B,C,M,P B,C,M,P B,C,M,P B,C,M,P
Demolition of light, reinforced M M M M M M M B,M,P B,M,P B,M,P
concrete foundation [<0.5 m (19.7")]
Brick walls C,M C,M C,M C,M C,M C,M C,M B,C,M,P B,C,M,P B,C,M,P B,C,M,P B,C,M,P B,C,M,P
Rock trenches for mains/water supply/utilities C,M C,M C,M C,M,P C,M,P C,M,P C,M,P C,M,P C,M,P
Rock excavation for foundation C,M C,M C,M,P C,M,P C,M,P C,M,P C,M,P C,M,P
Mass excavation of rock for industrial C,M,P C,M,P C,M,P C,M,P
building bases
Massive reinforced concrete foundations M,P M,P M,P
Separating rebar from concrete (for recycling) C,M C,M C,M C,M C,M C,M C,M B,C,M,P B,C,M,P B,C,M,P B,C,M,P B,C,M,P B,C,M,P
17-4 Edition 40
Tool Selection Hydraulic
Hammers
H120C S
H140D S
H160D S
H180D S
H35D S
H45D S
H55D S
H65D S
H90C S
H100 S
H115 S
H130 S
H70 S
H90C
H100
H70
3. Quarrying/open cast mining
Secondary boulder breaking B B B B B B
Primary breaking of rock C,M,P C,M,P C,M,P C,M,P
Breaking oversizes on a crusher/ C,M C,M B,C,M,P B,C,M,P B,C,M,P B,C,M,P B,C,M,P
feeder/feed chute
4. Underground applications
Scaling C C C C
5. Metallurgical applications
Breaking of slag in casting ladles C,M C,M C,M,P
Breaking of slag in converter openings C,M C,M,P C,M,P C,M,P C,M,P
Cleaning of castings C,M C,M C,M,P
Breaking of massive steel slag C,M,P C,M,P
Breaking of aluminum electrolyze slag C,M,P C,M,P C,M,P C,M,P
Breaking of refractory linings in furnaces C,M C,M C,M C,M C,M C,M C,M
6. Other applications
Demolition/Rock breaking under water C,M,P C,M,P C,M,P C,M,P C,M,P C,M,P
17
Edition 40 17-5
Hydraulic Specifications
Hammers
Oil temperature working range for all models: –20° C to +80° C (–4° F to +176° F).
Oil viscosity at operating oil temperature: 15 to 1000 cSt.
17-6 Edition 40
Specifications Hydraulic
Hammers
Oil temperature working range for all models: –20° C to +80° C (–4° F to +176° F).
Oil viscosity at operating oil temperature: 15 to 1000 cSt.
17
Edition 40 17-7
Hydraulic Specifications
Hammers ● Dimensions
A B C D E
Model mm in mm in mm in mm in mm in
H180D S 730 28.7 730 28.7 2478 97.4 174 7.0 542 21.0
H160D S 730 28.7 730 28.7 2369 93.3 160 6.3 589 23.2
H140D S 585 23.0 540 21.3 2167 85.3 140 5.5 454 17.9
H130 S 585 23.0 540 21.3 1885 74.1 130 5.1 397 15.6
H120C S 585 23.0 540 21.3 1783 70.1 115 4.5 357 14.1
H115 S 585 23.0 540 21.3 1625 63.9 106 4.2 390 15.4
H100 585 23.0 540 21.3 1397 54.9 95 3.7 459 18.1
H100 S 585 23.0 540 21.3 1394 54.8 95 3.7 459 18.1
H90C 510 20.1 380 15.0 1286 50.6 84 3.3 417 16.4
H90C S 520 20.5 400 15.7 1294 50.9 84 3.3 417 16.4
H90C (pin-on) 749 29.4 348 13.7 1325 52.1 84 3.3 417 16.4
H70 470 18.5 380 15.0 1134 44.6 70 2.8 402 15.8
H70 S 520 20.5 400 15.7 1150 45.3 70 2.8 390 15.3
H70 (pin-on) 690 27.1 348 13.7 1228 48.3 70 2.8 355 14.0
H65D S 535 21.0 415 12.0 895 35.0 65 2.6 330 13.0
H65D S (pin-on) 454 17.9 300 11.8 1055 41.5 65 2.6 330 13.0
H55D S 450 18.0 325 13.0 820 32.0 56 2.2 299 11.8
H55D S (pin-on) 429 16.9 300 11.8 997 39.3 56 2.2 299 11.8
H45D S 330 13.0 280 11.0 713 28.1 48 1.9 233 9.2
H35D S 320 12.6 280 11.0 621 24.4 40 1.6 221 8.7
17-8 Edition 40
Selection Hydraulic
Hammers
17
Edition 40 17-9
Hydraulic Selection
Hammers
S
)
)
op
op
la S
in S
la S
in S
n)
n)
70
S
S
S
90 /
H 00/
(F 5D
(P D
-O
(F D
(P D
-O
H C
tT
tT
/H
C
D
0
55
65
65
90
10
35
45
70
1
H
H
Model
H
Minimum Carrier kg 1100 1500 2500 2500 4500 3000 5000 7000 8000
lb 2430 3310 5500 5500 9900 6610 11,000 15,400 17,600
Maximum Carrier kg 2400 3200 6000 5200 9000 6500 8000 12 000 14 000
lb 5300 7060 13,200 11,500 19,800 14,300 17,600 26,400 30,800
Mini Excavators
301.6C ● ●
301.8C ● ●
302.5C ● #●# ●
303C CR ● ● #●#
303.5C CR ● ● ●
304C CR ● ● ● ●
305C CR ● ● ● ●
Skid Steer Loaders
216B ● ●
226B ● ●
232B ● ●
236B ● ●
242B ● ●
246C ● ●
248B ● ●
252B ● ●
256C ● ●
262C ● ●
268B ● ●
272C ● ●
Multi Terrain Loaders
247B ● ●
257B ● ●
267B ● ●
277C ● ●
279C ● ●
287C ● ●
289C ● ●
297C ● ●
299C ● ●
Backhoe Loaders
416E *●* ● ●
420E *●* ● ●
422E *●* ● ●
428E *●* ● ●
430E *●* ● ●
432E *●* ● ●
434E *●* ● ●
442E *●* ● ●
444E *●* ● ●
#Installation of add-on optional, counterweight to machine is required.
*Special machine configuration required.
Caterpillar recommends the use of a suitable shield/guard system to insure operator has adequate protection from flying debris.
These matches are for general reference purposes for Cat machines only. When special boom and quick coupler arrangements are in use, these matches may not apply.
When matching hammers to competitive carriers, selection should be made by carrier weight. Refer to the carrier weight range at the top of the table in order to determine
the correct match.
17-10 Edition 40
Selection Hydraulic
Hammers
S
C
0
S
90
10
)
op
S
la S
70
/H
S
0C
0D
0D
0D
(F 5D
tT
/H
0/
C
0
70
90
10
11
12
13
14
16
18
6
H
Model
H
Minimum Carrier kg 3000 5000 7000 8000 12 000 17 000 19 000 25 000 32 000 40 000
lb 6610 11,000 15,400 17,600 26,400 37,400 41,800 55,000 70,400 88,200
Maximum Carrier kg 6500 8000 12 000 14 000 20 000 26 000 32 000 40 000 55 000 75 000
lb 14,300 17,600 26,400 30,800 44,000 57,200 70,400 88,000 121,000 165,000
Hydraulic Excavators
307D *●* ● ●
308D CR *●* ● ●
311D ● ●
312D ● ● ●
314D CR ● ●
315D ● ● ●
319D ● ● ●
320D ● ● ●
M313D ● ●
M315D ● ● ●
M316D ● ● ●
M318D ● ● ●
M322D ● ● ●
321D CR ● ●
323D ● ●
324D ● ● ●
328D CR ● ●
329D ● ● ●
336D ● ● ●
345D ● ●
365C ●
#Installation of add-on optional, counterweight to machine is required.
*Special machine configuration required.
Caterpillar recommends the use of a suitable shield/guard system to insure operator has adequate protection from flying debris.
These matches are for general reference purposes for Cat machines only. When special boom and quick coupler arrangements are in use, these matches may not apply.
When matching hammers to competitive carriers, selection should be made by carrier weight. Refer to the carrier weight range at the top of the table in order to determine
the correct match.
17
Edition 40 17-11
Hydraulic Productivity
Hammers ● m3/8 hr – yd3/8 hr
17-12 Edition 40
Productivity Hydraulic
● Primary breaking (m3/8 hr – yd3/8 hr) Hammers
The figures are for comparison and evaluation purposes only. Results will vary depending on operator,
carrier and job conditions.
1300
1000
Limestone
Micaschist Granite
1200 Calcareous Sandstone
Dolomite
Biotitic Granite Concreted Shingle
900 Amphibolic Gneiss
Gabbro
1100 Feldspathic Sandstone
Andesite Weathered Basalt
Riolite
Amphibolic Granite
900 700 Diorite
Amphibolic Schist
Fresh Basalt
800
Weathered Diabase
600
Feldspathic Sandstone
Productivity
700
Piroxenic Quartzite
400
500
400
300
H180D S
300
200 H160D S
200
H140D S
100
100
H130 S
0 0 17
Edition 40 17-13
Hydraulic Productivity
Hammers ● Boulder breaking
H130 S H140D S
120
120
100
100
80
80
60
60
40
40
20
20
1 2 3 4 5 6 7
0.5 1 1.5 2 2.5 3 3.5
Boulder size (m3)
Boulder size (m3)
H160D S H180D S
120 120
100 100
Boulders per hour
Boulders per hour
80 80
60 60
40 40
20 20
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10
Boulder size (m3) Boulder size (m3)
SOFT ROCK HARD ROCK
17-14 Edition 40
Features Mobile Scrap and
Applications Demolition Shears
Guarding Recommendation
MOBILE SCRAP
AND DEMOLITION SHEARS
Features: Guarding Recommendation
● Straight lower jaw design. Shears used in hazardous applications like demo-
lition, and scrap and material handling can create a
● 360 degree left and right rotation. need for special operator guarding due to flying or
● High force to weight ratio. falling objects. When using a shear, additional pro-
tective devices such as a front screen, Falling Object
● Long wearing alloy steel blades. Guarding System (FOGS, includes top and front
● Cutting edges mounted on the side of the shear guarding), thick polycarbonate windshields or a
jaws and are visible to the operator. combination of these is recommended by Caterpillar.
Contact your Cat dealer for operator guarding options
● Shears can be mounted on boom or stick. on your machine.
● Robust rotation system with up to two hydraulic
motors on largest shears.
Applications:
Cat Mobile Scrap and Demolition Shears are
designed to cut and reduce the size of metal items
commonly found in scrap yards, buildings, and other
structures.
The profiles on the next page approximate shear
cutting capacity. The cutting capacities listed on the
next page were achieved by cutting the specified
steel profiles with a shear operating pressure at
35 000 kPa (5075 psi) and knives in slightly used
condition. Lower operating pressures, dull knife
edges, and harder steels will obviously reduce cut-
ting capability.
17
Edition 40 17-15
Mobile Scrap and Shearing Capability Table
Demolition Shears
Round
Diameter mm 125 120 115 100 90 50.8
(in) (5) (4.75) (4.5) (4) (3.5) (2)
Square
Width mm 120 100 90 90 65 40
(in) (4.75) (4) (3.5) (3.5) (2.5) (1.5)
Piercing
Thickness mm 33 27 22 19 16 10
(in) (1.38) (1.25) (0.88) (0.75) (0.63) (0.38)
17-16 Edition 40
Specifications Mobile Scrap and
Demolition Shears
B E
D
A C
17
Edition 40 17-17
Mobile Scrap and Specifications
Demolition Shears
B E
D
A C
17-18 Edition 40
Matching Guide Mobile Scrap and
Demolition Shears
Matching Guide
Matches are based on counterweight and grouser width on standard machines.
Wheeled excavator matches are calculated with all four stabilizers down.
Stick-Mount
Stick
Cat Excavator Boom m (ft/in) S385B S365B S340B S325B S320B S305
385C L GP 5.5 (18'1") X
4.4 (14'5") X X
3.4 (11'2") X X
2.92 (9'7") X X
385C L – DEM 40 X
365C L Reach 4.15 (13'7") X
3.6 (11'10") X
2.84 (9'4") X
365C L – DEM 33 X
345D L – VG Reach 3.9 (12'10") X
3.35 (11'0") X
345D – FIX Reach 3.9 (12'10") X X
3.3 (11'0") X X
345C – DEM 28 (91'9") X
26 (85'0") X
336D L/330D L Reach 3.9 (12'10") X X
3.2 (10'6") X X
329D L/325D L Reach 3.2 (10'6") X X
X X
2.65 (8'8") X X
328D LCR Reach 3.76 (12'4") X
3.2 (10'6") X X
2.65 (8'8") X X
324D L Reach 3.6 (11'10") X
2.95 (9'8") X X
2.5 (8'2") X X
321D LCR Reach 2.92 (9'6") X
2.5 (8'2") X
320D L Reach 2.92 (9'6") X
2.5 (8'2") X
320D LRR Reach 2.92 (9'6") X
2.5 (8'2") X
Reach-HD 2.92 (9'6") X
2.5 (8'3") X
319D L Reach 2.7 (8'10") X
2.25 (7'5") X
M322D One-Piece 2.5 (8'2") X
2.2 (7'3") X
M318D One-Piece 2.8 (9'2") X
2.5 (8'2") X
2.2 (7'3") X
M316D One-Piece 2.4 (7'10") X
2.1 (6'11") X
M315D One-Piece 2.4 (7'10") X
2.1 (6'11") X
308D CR One-Piece 2.2 (7'3") X
1.7 (5'6") X
17
307D One-Piece 2.2 (7'3") X
1.7 (5'6") X
Please reference bulletin GEJH0016 for matching information when utilizing a pin-grabber or dedicated coupler.
DEM = Demolition machine
VG = Variable wide gauge undercarriage
FIX = Fixed undercarriage
Edition 40 17-19
Mobile Scrap and Matching Guide
Demolition Shears
Matching Guide
Matches are based on counterweight and grouser width on standard machines.
Wheeled excavator matches are calculated with all four stabilizers down.
Boom-Mount
Cat Excavator Boom S385B S365B S340B S325B S320B S305
365C L Reach X
345D L – VG Reach X X
345D – FIX Reach X X
336D L/330D L Reach X X
329D L/325D L Reach X
328D L CR Reach X
324D L Reach X
321D L CR Reach X
320D L Reach X
320D LRR Reach X
Reach-HD X
319D L Reach X X
315D L Reach X X
314D CR Reach X
312D L Reach X
311D LRR Reach X
M322D One-Piece X
M318D One-Piece X X
M316D One-Piece X X
M315D One-Piece X X
M313D One-Piece X X
305C CR One-Piece X
304C CR One-Piece X
303.5C CR One-Piece X
Cat Skid Steer Loader S385B S365B S340B S325B S320B S305
236 X
242 X
246 X
247 X
248 X
252 X
257 X
262 X
267 X
268 X
277 X
287 X
Please reference bulletin GEJH0016 for matching information when utilizing a pin-grabber or dedicated coupler.
VG = Variable wide gauge undercarriage
FIX = Fixed undercarriage
17-20 Edition 40
Features Multi-Processors
Applications
Matching Guide
Jaw Types
Edition 40 17-21
Multi-Processors Guarding Recommendation
Specifications
● Concrete Cutter Jaws
Guarding Recommendation
Multi-Processors used in hazardous applications
like demolition, and scrap and material handling
can create a need for special operator guarding due
to flying or falling objects. When using a Multi-
Processor, additional protective devices such as a
front screen, Falling Object Guarding System (FOGS,
includes top and front guarding), thick polycarbon-
ate windshields or a combination of these is recom-
mended by Caterpillar. Contact your Cat dealer for
operator guarding options on your machine.
17-22 Edition 40
Specifications Multi-Processors
● Shear Jaws
17
Edition 40 17-23
Multi-Processors Specifications
● Tank Shear Jaws
17-24 Edition 40
Specifications Multi-Processors
● Crusher Jaws
17
Edition 40 17-25
Multi-Processors Specifications
● Pulverizer Jaws
17-26 Edition 40
Specifications Multi-Processors
● Pulverizer Jaws
17
Edition 40 17-27
Multi-Processors Cutting Capacity
Cutting Capacity
Model MP15 MP20 MP30 MP40
Narrow I-beams:
Height 300 mm 11.8" 400 mm 15.7" 500 mm 19.7" 600 mm 23.6"
Flange width 150 mm 5.9" 180 mm 7.1" 200 mm 7.9" 600 mm 8.7"
Flange thickness 10.7 mm 0.42" 13.5 mm 0.53" 16 mm 0.63" 19 mm 0.75"
Web thickness 7.1 mm 0.28" 8.6 mm 0.34" 10.2 mm 0.4" 12 mm 0.47"
Wide I-beams:
Height 190 mm 7.5" 250 mm 9.8" 310 mm 12.2" 390 mm 15.4"
Flange width 200 mm 7.9" 260 mm 10.2" 300 mm 11.8" 300 mm 11.8"
Flange thickness 10 mm 0.39" 12.5 mm 0.49" 15.5 mm 0.61" 19 mm 0.75"
Web thickness 6.5 mm 0.26" 7.5 mm 0.3" 9 mm 0.35" 11 mm 0.43"
Solid-round 65 mm 2.6" 80 mm 3.3" 90 mm 3.5" 100 mm 3.9"
Solid-square 60 mm 2.4" 70 mm 2.8" 80 mm 3.1" 90 mm 3.5"
The above profiles provide an indication of the shear’s cutting capability. The exact cutting dimensions depend on excavator size, the conditions of the cutters and jaws
and the tensile strength of the steel.
17-28 Edition 40
Features Contractor’s
Applications Grapples
Guarding Recommendation
Matching Guide
Guarding Recommendation
Contractor’s Grapples used in hazardous appli-
cations like demolition, and scrap and material han-
dling can create a need for special operator guarding
due to flying or falling objects. When using a Contrac-
tor’s Grapple, additional protective devices such as a
front screen, Falling Object Guarding System (FOGS,
includes top and front guarding), thick polycarbon-
ate windshields or a combination of these is recom-
mended by Caterpillar. Contact your Cat dealer for
operator guarding options on your machine.
17
Edition 40 17-29
Contractor’s Specifications
Grapples
17-30 Edition 40
Features Sorting and
Matching Guide Demolition Grapples
Specifications North America
Edition 40 17-31
Multi-Grapples Features
Europe, Africa, Matching Guide
Middle East Specifications
17-32 Edition 40
Specifications Multi-Grapples
Europe, Africa,
Middle East
17
Edition 40 17-33
Orange Peel Grapples Features
North America Specifications
Features:
● Continuous, bi-directional 360° hydraulic rotation. ● Tines constructed of high-strength wear-resistant
steel.
● Heavy-duty, fully protected cylinders.
B
A
17-34 Edition 40
Specifications Orange Peel Grapples
North America
B
A
17
Edition 40 17-35
Orange Peel Grapples Matching Guide
North America Guarding Recommendation
Matching Guide
Boom Stick
Length Length GSH15B GSH20B GSH22B
0.57 m3 0.57 m3 0.76 m3 0.96 m3 1.15 m3 1.53 m3
m (ft/in) m (ft/in) (0.75 yd3) (0.75 yd3) (1.00 yd3) (1.25 yd3) (1.50 yd3) (2.00 yd3)
M318C MH 6.2 (20'3") 4.9 (16'1") X
M318D MH 6.2 (20'3") 4.9 (16'1") X
M322C MH 6.8 (22'3") 4.9 (16'1") X + + +
5.9 (19'4") – – X
M322D MH 6.8 (22'4") 4.9 (16'1") X + + +
5.9 (19'4") – – X
M325C MH 8.9 (29'0") 6.0 (19'8") – X +
7.4 (24'4") X
M325C L MH 8.9 (29'0") 6.0 (19'8") – X +
7.4 (24'4") – X
M325D MH 8.9 (29'0") 6.0 (19'8") – X +
7.4 (24'4") X
M325D L MH 8.9 (29'0") 6.0 (19'8") – – X +
7.4 (24'4") – X
320C MH 6.7 (21'10") 5.5 (17'11") X
325C MH 8.4 (27'5") 5.5 (17'11") – X
8.85 (29'0") 6.0 (19'8") X
325D MH 8.85 (29'0") 6.0 (19'8") – X
7.4 (24'4") X
330C MH 9.1 (29'10") 6.0 (19'8") – X
330D MH 9.2 (30'2") 6.1 (20'0") – – – X
7.6 (24'11") – – X
W345C MH 9.9 (32'6") 7.4 (24'4") – X
9.1 (29'10") – X
345C MH 9.9 (32'6") 7.4 (24'4") – X
9.1 (29'10") X
X Primary match for good stability in average scrap handling situations. Considers a material density in the 1200 kg/m3 (2000 lb/yd3) range.
Guarding Recommendation
Orange Peel Grapples used in hazardous appli- Object Guarding System (FOGS, includes top and
cations like scrap and material handling can create front guarding), thick polycarbonate windshields or
a need for special operator guarding due to flying a combination of these is recommended by Caterpillar.
objects. When using an Orange Peel Grapple, addi- Contact your Cat dealer for operator guarding options
tional protective devices such as a front screen, Falling on your machine.
17-36 Edition 40
Features Orange Peel Grapples
Selection Guide Europe, Africa,
Middle East
Features:
● Suitable for a wide range of applications. ● Heavy-duty, cushioned cylinders with swing bear-
ings on both sides.
● Maximum component protection; lower operating
cost. ● Maintenance covers for easy access to all main-
tenance points.
● Low profile.
● Weld-on replaceable tips.
● High stability.
● High commonality of parts between 5 and 4 tine
● Protected hydraulics. configurations.
● Connection lines protection guard. ● Hardened steel-alloy pins.
● Tines constructed of high-strength wear resistant ● High closing force.
steel.
● Excellent material penetration.
● Continuous, bi-directional 360° hydraulic rotator.
● Superior lifting capacity.
● Pressure limiting valve for opening and closing.
Selection by Application
4 Tines 5 Tines
Grapple Application O S C N O S C N
Handling Scrap, Small-sized pieces (shredded) x x
Iron and Steel Large-sized pieces up to 1000 ⳯ 1000 mm (39" ⳯ 39")
(steel scrap, wrought iron, white goods, motor blocks)
Heavy/long-sized pieces (I-beams, pipes, plates) x x
Car bodies x x
Handling Nonferrous Small-sized pieces (beverage cans, electric devices) x x
Scrap Metals Large-sized pieces (car radiators, batteries)
Wires and cables (copper, lead)
Other Nonferrous Waste
Materials Rocks, concrete blocks x x
17
Edition 40 17-37
Orange Peel Grapples Specifications
Europe, Africa,
Middle East
17-38 Edition 40
Specifications Orange Peel Grapples
Europe, Africa,
Middle East
Edition 40 17-39
Orange Peel Grapples Specifications
Europe, Africa,
Middle East
17-40 Edition 40
Specifications Orange Peel Grapples
Europe, Africa,
Middle East
Edition 40 17-41
Orange Peel Grapples Matching Guide
Europe, Africa,
Middle East
17-42 Edition 40
Features Multi-Functional
Guarding Recommendation Concrete Crushers
Matching Guide Europe, Africa,
Middle East
Guarding Recommendation
Multi-Functional Concrete Crushers used in haz-
ardous applications like breaking out concrete from
fixed structures, pulverizing concrete and cutting,
can create a need for special operator guarding due
to flying objects. When using a Multi-Functional Con-
crete Crusher, additional protective devices such as a
front screen, Falling Object Guarding System (FOGS,
includes top and front guarding), thick polycarbonate
windshields or a combination of these is recommended
by Caterpillar. Contact your Cat dealer for operator
guarding options on your machine.
17
Edition 40 17-43
Multi-Functional Specifications and Dimensions
Concrete Crushers
Europe, Africa,
Middle East
17-44 Edition 40