Professional Documents
Culture Documents
Description
7AT-920 Single aviation obstruction light for marking Towers (Telecom, GSM, Microwave & TV),
Cranes, Hoists, Smokestacks, Light Pylons, Buildings and any other potentially hazardous
obstructions to air traffic with a steady burning red safety light.
The enclosure of LS708 is made of die casting aluminum with powder coated finish, with the
advantages of light weight, waterproof, shockproof and corrosion resistant. Light source consists of
external long life LEDs, to ensure maximum life of the product.
Company
All
Aplicaciones Tecnológicas S.A. - Parque Tecnológico de Valencia - Nicolás Copérnico, 4 - 46980 Paterna (Valencia), Spain T +34 961 318 250 - F +34 961 318 206 - atsa@at3w.com - www.at3w.com
DATA SHEET
Specifications
Dimensions
Wiring
• Check whether the supply voltage does comply with the rated voltage of the lamp.
• Secure the light fitting on the top of a machine or lighthouse using threaded G3/4″ ( G1″)
pipe (secure the light reliably against falling in operation.)
• Verify whether the power cables are well connected before power on
Aplicaciones Tecnológicas S.A. - Parque Tecnológico de Valencia - Nicolás Copérnico, 4 - 46980 Paterna (Valencia), Spain T +34 961 318 250 - F +34 961 318 206 - atsa@at3w.com - www.at3w.com
DATA SHEET
The product consists of two aviation obstruction lights and die cast aluminium light fitting, which
houses the electronics and LED cluster, providing high luminance, stable performance, external
long life, environmental protection, corrosion resistance, shockproof and ease of mount.
Company
All
Aplicaciones Tecnológicas S.A. - Parque Tecnológico de Valencia - Nicolás Copérnico, 4 - 46980 Paterna (Valencia), Spain T +34 961 318 250 - F +34 961 318 206 - atsa@at3w.com - www.at3w.com
DATA SHEET
Specifications
• Compliant to the ICAO (Aerodromes Annex 14) (Type A)
• Operating voltage: AC220V DC12V ~ 24V DC48V (optional)
• Power frequency: 50Hz ~ 60Hz
• Power consumption: <8W
• Steady burning or flashing mode are available (optional)
• Intensity: >32.5cd
• Horizontal degree: 360°
• Vertical degree: 10°
• LED life: ≥100,000 hrs
• Operating temperature: -30ºC - +70ºC
• IP Protection: IP65
• Weight: 4.2Kg
• Visible distance: >5Km (AT=0.85)
Dimensions
2. Secure the light fitting on the top of a machine or lighthouse using G3/4”( G1”) pipe (secure the
light reliably against falling in operation.)
3. Open the junction box cover, connect power cable and earth wire to corresponding terminals and
then remount the cover.
4. Power on after verification of connection, the service light will light up, if and when the service
light fails, the controller will switch on the standby light, at this moment, and the maintenance worker
should check and replace the service light as early as possible.
Aplicaciones Tecnológicas S.A. - Parque Tecnológico de Valencia - Nicolás Copérnico, 4 - 46980 Paterna (Valencia), Spain T +34 961 318 250 - F +34 961 318 206 - atsa@at3w.com - www.at3w.com
DATA SHEET
Aplicaciones Tecnológicas S.A. - Parque Tecnológico de Valencia - Nicolás Copérnico, 4 - 46980 Paterna (Valencia), Spain T +34 961 318 250 - F +34 961 318 206 - atsa@at3w.com - www.at3w.com