Professional Documents
Culture Documents
Size:
The size of the Terrazzo Tiles depends on the shapes. The thickness of face layer and back layer is equally half
from the total thickness.
Shape:
Terrazzo Tile is available in different shapes such as I shape, Square shape, octagonal shape etc.… Based on
these shapes the sizes varies.
Color:
Terrazzo Tile is available in all the standard colors such as Red, Light Red, Grey, Light Grey etc., with different
appearances, as mentioned in the Catalogue. Also, ARTIC provides the different color and appearance, as per the project
requirement after successful R&D trials.
Finish/ Texture:
Terrazzo Tile is available in different finishes such as Polished Terrazzo finish, Exposed aggregate Finish,
Smooth Mold Finish, Etching Finish.
Dimensional Tolerance:
Below mentioned are the Tolerance in compliance with the standards: SASO 1029, SASO 1028, BS EN13748-2,
ASTM C140
Length : ± 2 mm
Width : ± 2 mm
Thickness : ± 3 mm
Mechanical Properties:
Flexural strength: The Flexural strength shall not be less than;
Average: 4 Mpa
Individual: 3.5 Mpa
Standard: BS EN13748-2, SASO 1029, SASO 1028, ASTM C 293
*Note:
1. Any test reports issued shall not be considered for the particular size, shape or color, in fact shall be
considered for the Terrazzo Tile as one category.