Professional Documents
Culture Documents
ALM8 kit
INSTALLATION INSTRUCTION
© Ericsson AB 2010, 2017. All rights reserved. No part of this document may be
reproduced in any form without the written permission of the copyright owner.
Disclaimer
The contents of this document are subject to revision without notice due to
continued progress in methodology, design and manufacturing. Ericsson shall
have no liability for any error or damage of any kind resulting from the use
of this document.
Trademark List
All trademarks mentioned herein are the property of their respective owners.
These are shown in the document Trademark Information.
Contents
1 Introduction .............................................................................................. 4
3 Required Tools......................................................................................... 4
1 Introduction
This document describes how to install the 19-inch SAU kit for external
alarms. It also describes how to install the OVP-ALM8 kit.
2 Included Products
The kits include the following products.
• 1 Installation Instruction
3 Required Tools
The tools required for this installation are listed below.
• Torx 20 Screwdriver
• Torx 30 Screwdriver
1531-NTM 201 3932/1 Uen Rev E 2010-10-18 Ericsson AB 2010, 2017 4 (6)
Ericsson Internal
Installation of 19-inch SAU kit and OVP-ALM8 kit
1531-NTM 201 3932/1 Uen Rev E 2010-10-18 Ericsson AB 2010, 2017 5 (6)
Ericsson Internal
Installation of 19-inch SAU kit and OVP-ALM8 kit
1531-NTM 201 3932/1 Uen Rev E 2010-10-18 Ericsson AB 2010, 2017 6 (6)
Ericsson Internal