Professional Documents
Culture Documents
NSU Quiz1 EEE-332 Sec 05
NSU Quiz1 EEE-332 Sec 05
Q. 1 For an active low LED display system, determine the look up table content 5
and show its use by a schematic diagram using an appropriate OPCODE.
Q. 2 Explain what happens when the POPA instruction executes. Make sure to 5
show the physical addresses from where data are retrieved. (Assume that SP
= 1FF8H and SS = 0000H before execution.)
Q. 3 Suppose the physical address is given as 5C4BEH and the top address of the 5
segment is as 60EF0H. Determine the base and offset address of the system.
Mention the 5 illegal MOV operation available in 8086 microprocessor.
Q. 1 For an active high LED display system, determine the look up table content 5
and show its use by a schematic diagram using an appropriate OPCODE.
Q. 2 Explain what happens when the PUSHA instruction executes. Make sure to 5
show the physical addresses where data are stored. (Assume that SP = 1008H
and SS = 0000H after execution.)
Q. 3 Suppose the physical address is given as 5D4E0H and the top address of the 5
segment is as 60EF0H. Determine the base and offset address of the system.
Mention the 2 exceptional instructions that are available in 8086
microprocessor for data movement related operation.