Professional Documents
Culture Documents
3-20.osb1006 Rsa
3-20.osb1006 Rsa
Course Overview
Course Objectives
Identify the working principle of the RSA
Perform the data setting of the RSA
Perform the maintenance of the RSA
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
Section 1 Overview
Concept
Mode
OSB1006-2
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
For the far-end RSA, there are two RSA connection modes:
RSA mode and RSB mode, they are all called RSA interfaces. The
far ends of the two modes are all composed of the far-end RSA
board, DRV board and ASL boards, but the difference is that the far
end of the RSA mode has two frames: far-end RSA frame and
subscriber frame; while the far end of the RSB mode has only one
frame, that is the RSB frame, which holds all the relevant boards.
Functions
The RSA does not have the internal switching capability. The
test function of the RSA subscribers is done by the TSS board in the
RSA frame.
OSB1006-3
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
LAP-RSA mode
The voice signals at the RDT interface are connected with the
network board of the SM through the HW line, thus the voice path is
connected through; the control signals are connected with the
LPRSA board through TS16 of the PCM system on the RDT board,
and transmit the signaling over the link on the LPRSA board, that is,
to transmit the control signaling to the far end through TS16 of the
E1. The LAP•]RSA mode connection is shown in Figure 1-1.
Far
N L M end
E A P RSA
T P U
Far
end
R RSA
R D
T
D
T Far
Op tical Optical end
transceiv er transceiver RSA
Far
end
RSA
So in the multi-level control structure of the C&C08 system,
the MPU also controls the function boards in the remote subscriber
frame of the LAP-RSA mode through
5•FMPU•]•]NOD•]•]RDT•]•]RSA-1•ifar-end RSA
interface board•j•]•]board in the subscriber frame
OSB1006-4
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
For the RSA whose near-end form is LPRSA, the near end is
two 2Ms on the LPRSA board and the same RDT board in the main
control frame, the remote interface board is the far-end RSA board,
and the TS allocation is as below: their voice channels use time slot
1~15 and 17~30, TS0 transmits the synchronous signals, TS16
transmits the control signals, and TS31 transmits the busy tone
signals.
The far-end RSA boards also have the mutual help function.
The LPRSA links are automatically configured by the system. When
a link fails, the system will automatically switch to another link.
OSB1006-5
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
For the RSA far end, the RSA connection is of two modes:
RSA mode and RSB mode.
RSA mode
The far-end RSA in the RSA mode consists of the far-end
RSA interface frame and the far-end RSA subscriber frame. The
hardware of the far-end RSA subscriber frame is completely the
same as that of the near-end subscriber frame.
OSB1006-6
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
RSA frame
Subscriber frame
Subscriber frame
Subscriber frame
Subscriber frame
RSB mode
The biggest difference between the RSB type far-end RSA and
the RSA type far-end RSA is that the RSB type far-end RSA
combines the far-end RSA interface board and the remote subscriber
frame, eliminating the stand-alone far-end RSA interface
frame•Cthus saving the frame resources.
The RSB type far-end frame is called the RSB frame, which is
composed of the far-end RSA interface board, ASL board, DRV
board and TSS board, as shown in Figure 1-5 (the numbers in the
upper row stand for the slot number, and the numbers at the bottom
row represent the subnode numbers).
OSB1006-7
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
P P
A A A A A A A A R D D R A A A A A A A A T
W W
S S S S S S S S S R R S S S S S S S S S S
X X
L L L L L L L L A V V A L L L L L L L L S
0 1 2 3 4 5 6 7 16 17 8 9 10 11 12 13 14 15 21
In the near end, the RDT board resources are provided by the
BNET board and the NOD board. In the far end, the HW and the
NOD lines led out of the RSA-1 board are connected to the remote
subscriber interface part.
The remote subscribers are tested by the TSS board.
The RSA does not have the internal switching function, the
switching of its subscribers is done in the near-end module. The
RSA interface actually extends the HW and the NOD lines, so the
remote subscribers cannot feel the existence of the RSA.
The RSA number resources are part of the host office.
The control structure of the remote subscriber frame is:
MPU•]•]NOD•]•]RDT•]•]RSA-1•]•]boards in the
subscriber frame
OSB1006-8
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
subscriber frame for the RSA data, this is equivalent to the addition
of a frame in terms of the data.
The RSA data involve two parts: configuration data part and
the user data part.
Configuration data
set LAPRSA and RDT
add the far-end RSA frame and the remote subscriber frame
add the RSB frame
User data
The user data are completely the same as the ordinary user data.
OSB1006-9
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
Section
The LPRSA board lies in the MFC slot in the main control
frame, which is numbered in the same way together with the LAP,
NO7, MFC and MEM boards. The RDT board is actually the DTF
board in the digital trunk frame, only that the DTF board is
described as the RDT board.
After the setting of the LPRSA board and the RDT board, the
switch will automatically establish the connection between the link
on the LPRSA board and TS16 of the PCM system on the RDT
board, without the need to set the data.
Relevant commands
Command explanation
First, the slot concerned shall hold the LPRSA board, then set
the LPRSA board in the MFC slot in the main control frame. If the
OSB1006-10
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
slot has been described as the board of other type, please delete the
board in the slot, and add the LPRSA board again.
STR ISOBRD•FMN=1•CF=2•CS=17•G
ORMV BRD•FMN=1•CFN=2•CSN=17•G
ADD BRD•FMN=1•CFN=2•CSN=17•G
OADD BRD•FMN=1•CFN=2•CSN=17•CBT=LPRSA•G
First, the slot concerned shall hold the DTF board, then set the
RDT board in the slot in the trunk frame. If the slot has been
described as the board of other type, please delete the board in the
slot, and add the RDT board again.
STR ISOBRD•FMN=1•CF=5•CS=2•G
ORMV BRD•FMN=1•CFN=5•CSN=2•G
OADD BRD•FMN=1•CFN=5•CSN=2•CBT=RDT•G
OSB1006-11
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
Section
The ordinary RSA mode includes the far-end RSA frame and
far-end RSA subscriber frame, altogether two frames. The far-end
RSA subscriber frame is connected with the near end through the
RSA_1 in the far-end RSA frame; while the RSB mode includes
only one RSB frame that holds the subscriber boards and the RSA_1
board connecting the near end. From this we can see that the biggest
difference between the ordinary RSA and the RSB modes is that the
RSB combines the far-end RSA board and the subscriber boards in
one frame.
The remote setting in the RSA mode is of two parts: Setting the
far-end RSA interface frame and setting the far-end RSA subscriber
frame.
General
This command is used for the far-end RSA mode, it adds a far-
end RSA frame and adds the default board configuration in the
frame.
Relevant commands
OSB1006-12
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
Command explanations
•yConnection mode/LT•z
There are two connection modes for the RSA: RSA-RSA mode
and LAP-RSA mode. In terms of the hardware, the near end of the
RSA-RSA mode is the near-end RSA frame, while the near end of
the LAP-RSA mode is the LPRSA board and the RDT board.
OSB1006-13
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
Indicating the number of the slot holding the RDT board that
corresponds to the first board of the far-end RSA in Groups 1, 2, 3
and 4 respectively.
Indicating the number of the slot holding the RDT board that
corresponds to the second board of the far-end RSA in Groups 1, 2,
3 and 4 respectively.
If you want to check the result of adding the frame, you can
input the “LST FRM” to show it.
% Note:
The connection lines between the far-end RSA and RDT shall be
consistent with the data.
OSB1006-14
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
General
Relevant commands
Command explanations
OSB1006-15
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
The number of the frame that houses the TSS board testing the
subscribers of the said frame.
If you want to have a look at the result of adding the new
frame, please enter the command “LST FRM”.
Command•FLST FRM•FMN=1•CF=13•CSD=TRUE•G
% Note:
When you add the B type subscriber frame with the command, you
also add the board configuration of the frame. If the configuration
is not in conformity with the actual conditions, you can use the
remove/add board operation to adjust it.
OSB1006-16
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
General
Relevant commands
Command explanations
Set the corresponding RSB frame according to the example.
Command•FADD
RSBFB•FMN=1•CF=11•CLN=3•CPNM=•gRemote
RSB•h•CPN=3•CROW=0•CCOL=0•CLT=LAP•CRSA0F=5
•CRSA0S1=0•G
Setting the parameters for an RSB frame is similar to setting
the parameters of a far-end RSA frame.
OSB1006-17
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
Section4 Examples
The dual configuration means the far end uses two RSA boards
to support a frame of subscribers. As a trunk board has two 2Ms,
you can use one trunk board to support these subscribers. But for the
sake of security, it is recommended that you use E1s in the same
positions on two adjacent trunk boards to support a frame of remote
OSB1006-18
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
ADD
RRFB•FMN=1•CF=8•CLN=2•CPNM=Qingqingshijie•CPN=0
•CROW=0•CCOL=2•CLT=LAP•CRSAOF1=5•CRSAOS1=2
•CPCM1=E1I•CRSAOS2=3•CPCM2=E1I•G
ADD
RUSFB•FMN=1•CF=9•CLN=3•CPNM=Qingqingshijie•CPN=
3•CROW=0•CCOL=0•CRSA1F=8•CRSA0S1=7•CRSA0S2=8
•CTSN=9•G
OSB1006-19
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
ADD RRFB•FMN=1•CF=10•CLN=2•CPNM=Training
Center•CPN=0•CROW=0•CCOL=2•CLT=LAP•CRSAOF1=5
•CRSAOS1=2•CPCM1=E1II•G
ADD RUSFB•FMN=1•CF=11•CLN=3•CPNM=Training
Center•CPN=3•CROW=0•CCOL=0•CRSA1F=10•CRSA0S1=
7•CRSA0S2=7•CTSN=11•G
OSB1006-20
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
The RSA user data are equivalent to the ordinary user data. The
RSA subscribers enjoy the same functions and services as the
ordinary subscribers.
When setting the RSA user data, please pay attention to these
following points:
That, as the subscribers in an SM, the subscriber equipment the
RSA subscribers are numbered together with those of the near-end
subscribers.
That the RSA subscriber number resources are the local office
number resources.
Suppose the relevant call source codes and the charging data
have been completely set.
ADD
DNSEG•FP=0•CBEG=K•f8880000•CEND=K•f8880015•CI
NDX=1000•G
ADD
ST•FD=K•f8880000•CDS=608•CMN=1•CRCHS=0.
OSB1006-21
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
You can also observe the remote subscriber state through the
dynamic trace. The other trace parts are the same as tracing the
ordinary subscribers.
OSB1006-22
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
Summary
Describe the hardware configuration involved in the RSA
module, including the frames, boards and system resources.
Convert the format of all the configuration data if the on-line
setting is not used after the setting of the configuration data, then
load the near-end SM where the RSA resides.
Describe the user data part of the RSA data.
OSB1006-23
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.10R002
Exercise
Hands-on Exercises
OSB1006-24
Course OSB1006 RSA
Issue 1.0 OVSV6.10R003
Version6.01R002
Keys
1. Yes.
2.
3. The RSA does not have the internal switching function, its
subscribers are switched in the near-end module. The RSA interface
actually functions to extend the HW and the NOD lines, so that the
remote subscribers cannot feel the existence of the RSA.
OSB1006-25
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.01R002
Table of Contents
Course Description
1
Course Overview
1
Course Objectives
1
Section 1 Overview
2
xxvi
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.01R002
Section4 Examples
18
xxvii
Course OSB1006 RSA
Issue 1.0 OVSV610R003
Version6.01R002
Summary
23
Exercise
24
Keys
25
xxviii
Course OSW0111 Primary User Data
Issue 1.0 OVSV610R003
Course OSB1006
RSA
OSB2A03- 29