ID: A00237181 Date: 6/03/2024 College: CEST (FNU Namaka) Definitions: Electric motors: motors that are electrically driven to boost the speed level of a gas turbine till it reaches self- sustaining speed (after which it gets declutched, cooled and then shut). Before the gas turbine can further up by itself, the electric motor helps it navigate through various speed levels. Air (pneumatic) motors: Air, or pneumatic, motors convert compressed air energy to mechanical work through linear or rotary motion. Several different designs are available of which the vane, piston and turbine motors are the most common
Cartridge/turbine: A pneumatic starter that uses air
pressure built by powder in a cartridge burning in the breech of the starter, the high-pressured gas will spin the turbine geared to the engine compressor.
Combustor (fuel) motor: an engine motor that uses
fuel for combustion which in turn, creates energy for thrust and other relative movements
Turbine impingement: a method of maintaining
acceptable temperatures in a gas turbine component that involves using pressure differentials and appropriate nozzle configurations to generate high- speed jets that cool the interior surfaces of the components & in this case, the turbine.
Wind milling: Wind milling is a phenomenon, which
can occur in aero-engines after a fan-blade, has come off during flight 1. After starting the engine, the ignition is turned on within a few seconds. 2. After a specific period (seconds), the fuel is released. 3. This is when combustion occurs. 4. The engine begins to rotate/work on its own. 5. The ignition switch is turned off. 6. The starter generator is turned off as the engine can sustain itself. 7. The engine is now moving without aid from the starter generator or APU.