Professional Documents
Culture Documents
cam-action
door closer system
DORMA ITS 96
DORMA ITS 96 Concealed cam-action
door closer system
sophistication Variable
closing force Spring strength
EN EN
2–4 3–6
The DORMA ITS 96 has slender dimensions of the Standard doors up to 1100 mm 2 2
ushered in a new era in door unit, the DORMA ITS 96 up to 1400 mm – 2
closer technology. The closer can be installed in virtually
body and slide channel all doors with thicknesses of External doors, outward opening – –
are so compact that they 40 mm or more, and offers Fire and smoke check doors up to 1100 mm 2 2
can be installed out of sight all the advantages of quality up to 1400 mm – 2
in doors and their frames. assured manufacture with Door leaf thickness equal to/greater
These devices offer the third-party auditing. than 40 mm 2 –
same high quality expected equal to/greater
of DORMA door closers, as Certified to ISO 9001. than 50 mm 2 2
characterised by their ease Max. door leaf weight in kg 100 180
of operation for the user,
and wide range of functions. Non-handed design 2 2
Thanks to the exceptionally Arm Slide channel 2 2
Closing force variable by means
of adjustable screw 2 2
Plus points
Closing speed adjustable by means of valve 2 2
For the trade For the specifier/architect Latching speed adjustable
2 Low inventory costs and 2 Unblemished appearance by means of valve 2 2
reduced stocking require- of prestige doors thanks to Cushioned limit stay, mechanical 2 2
ments thanks to stream- concealed installation.
Delayed action – –
lined modular system 2 Ideal for doors integral to
and separate packaging of the interior design. Hold-open " "
closer body and slide Max. door opening angle
channel assemblies. (depends on door design) approx.120°
2 Tailor-made applications For the user
2 Optimum protection against Weight in kg 1.3 2.5
with special accessories.
vandalism thanks to the Dimensions in mm Length 277 291
For the installer concealed installation. Width 32 39.5
2 Non-handed system. 2 Enhanced user convenience Height 42 51
2 Can be incorporated within and fully controlled, Door closer tested to EN 1154 2 2
the door pre-fabrication reliable closing with
mark for building products 2 2
process, allowing complete adjustable latch action.
installation in the factory. 2 Cushioned limit stay with 2 Yes – No " Option
2 Easy adjustment of the progressive damping
closing strength, closing for protection of wall and
speed and latch action door.
after hanging of the doors.
515 (512)
440
20 400
20
12
3
78 (69)
12
(42)
51
334 (320)
96 (93)
9 9
R8
(32)
20
40
12
approx.
400 120° approx. 80°
20
Cushioned limit stay
G 96 N
31
440
20
200
200
20
Hold-open units
RF G 96 N20
approx.
120°
Hold-open range
RF G 96 N
The DORMA RF hold-open The DORMA RF mechanism Not for fire and smoke
unit enables doors to be is non-handed and has been check doors.
securely held without any specifically designed for
fall-back at precisely the retrofitting to the G 96 N
required position up to an slide channel.
opening angle of approx.
120°. The hold-open
function can be easily
switched on and off by the
user (only RF G 96 N), and
the release force can be
adjusted to the door type
concerned.
12
(46)
55
3
min. 50
=
(min. 40)
DORMA ITS 96 door closer with DORMA G 96 N20 slide channel in a timber door
Example: Anticlockwise-closing (ISO 6) door; mirror image applies to clockwise-closing (ISO 5) doors.
1451) 440
max. 16
1751) 375
Illustration shows the ITS 96, size 3 – 6
Dimensions shown in ( ) = ITS 96, size 2 – 4
DORMA ITS 96 door closer with DORMA G 96 N20 slide channel in an aluminium framed door
Example: Anticlockwise-closing (ISO 6) door; mirror image applies to clockwise-closing (ISO 5) doors.
1) Add 25 mm for aluminium profile frames with corner-angle reinforcement.
min. 5 40 (32)
96 (99) 300 (286)
55 (46)
min.16
12
24
20 105
145 440
175 375
DORMA ITS 96 door closer with DORMA G 96 N20 slide channel in a timber door-transom fixing
Example: Anticlockwise-closing (ISO 6) door; mirror image applies to clockwise-closing (ISO 5) doors.
F Approval certification
The DORMA ITS 96 is
approved by the State
Material Testing Authority,
Dortmund, in accordance
with EN 1154 A.
Additionally, the model size
EN 2 – 4 and EN 3 – 6 has
CERTIFIRE approval for use
on timber FD30 and FD60
doors (code ITT), when
installed with the approved
intumescent gasket set for
FD30 or FD60 supplied by
DORMA UK.
The length, width and hight
of mortice for the body and
slide channel must be
increased by 2 mm to
accommodate the gasket.
A
M
R
O
D
EN 2 – 4
y 52430150
EN 3 – 6
y 52290150 52005600 52003600 52000105 52000205 52000405
G 96 N20 y
# #
y 520039xx
X
x 1) y
X
x
G 96 N y
# # #
y 52000501
X
x y
X
x
Fixing plates
for ITS 96
#
52000300
Specification text