Professional Documents
Culture Documents
Problem 1: Determine the internal forces acting on the cross section at point A if P = 50kN,
a = 2m and θ = 30°. (figure 1)
Problem 2: Determine the internal forces acting on the cross sections a-a (horizontal) and
b-b (vertical) if P = 60kN, a = 1m and θ = 40°. (figure 2)
Figure 1 Figure 2
Problem 3: Determine the resultant internal normal force, shear force, and bending moment
acting on the cross section at point C in the beam. (figure 3)
Problem 4: Determine the resultant internal normal force, shear force, and bending moment
acting on the cross section at points C and D in the beam. (figure 4)
Figure 3 Figure 4
Problem 5: Determine the resultant internal loadings acting on the cross sections through
section a-a. (Figure 5)
Problem 6: Determine the resultant internal torque acting on the cross sections through
point C. (Figure 6)
Figure 5 Figure 6
Figure 7 Figure 8
Problem 9: Determine the resultant internal loadings acting on the cross section at points
B and C of the curved member. (figure 9)
Figure 9 Figure 10
Problem 10: Determine the resultant internal normal force acting on the cross section
through point A in column which has a mass of 200kg/m. (Figure 10)
Problem 11: Determine the resultant internal normal force acting on the cross section
through point C in column. (Figure 11)
Figure 11
Problem 12: Determine the resultant internal torque acting on the cross sections through
points C and D. The support bearings at A and B allow free turning of the shaft. (Figure 12)
Problem 13: Determine the resultant internal torque acting on the cross sections through
points B and C. (Figure 13)
Problem 14: Determine the resultant internal torque acting on the cross sections through
points A and B. (Figure 14)
Problem 15: Determine the resultant internal torque acting on the cross sections through
points B and A. (Figure 15)
Figure 14 Figure 15
Problem 16: The joint is subjected to the force system shown. Determine the internal forces
through in section a-a. Knowing h = 20mm. (Figure 16)
Figure 17
Figure 16
Figure 18 Figure 19
Problem 20: Determine the internal forces through in section a-a. (Figure 20)
Figure 20