Professional Documents
Culture Documents
2W04 Bridge
2W04 Bridge
1.10 (27.9)
* High reliability
MIN.
* Low reverse current
* Low forward voltage drop
* Ideal for printed circuit board 0.034 (0.86)
0.028 (0.71)
MECHANICAL DATA :
* Case : Reliable low cost construction
utilizing molded plastic technique AC -
0.22 (5.59)
* Epoxy : UL94V-O rate flame retardant + AC 0.18 (4.57)
RATING SYMBOL 2W005 2W01 2W02 2W04 2W06 2W08 2W10 UNIT
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts
Maximum Average Forward Current
0.375" (9.5 mm) lead length Tc = 25°C IF(AV) 2.0 Amps.
Peak Forward Surge Current Single half sine wave
Superimposed on rated load (JEDEC Method) IFSM 50 Amps.
Rating for fusing ( t < 8.3 ms. ) I2t 10 A2S
Maximum Forward Voltage per Diode at IF = 1.0 Amp. VF 1.0 Volts
Maximum DC Reverse Current Ta = 25 °C IR 10 µA
at Rated DC Blocking Voltage Ta = 100 °C IR(H) 1.0 mA
Typical Junction Capacitance per Diode (Note 1) CJ 24 pf
Typical Thermal Resistance (Note 2) RθJA 36 °C/W
Operating Junction Temperature Range TJ - 50 to + 150 °C
Storage Temperature Range TSTG - 50 to + 150 °C
Notes :
1 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
2 ) Thermal resistance from Junction to Ambient at 0.375" (9.5 mm) lead length P.C. Board w ith, 0.22" x 0.22" (5.5 x 5.5 mm) copper Pads.
UPDATE : APRIL 23,1998
This datasheet has been downloaded from http://www.digchip.com at this page
RATING AND CHARACTERISTIC CURVES ( 2W005 - 2W10 )
CURRENT, AMPERES
0.375(9.5mm)
1.6 40
TJ = 55 °C
Copper Pads
1.2 0.22" x 0.22" (5.5 x5.5mm) 30
0.8 20
0 0
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100
20
10 10
TJ = 100 °C
1 1.0
TJ = 25 °C
0.1 0.1
Pulse Width = 300 µs TJ = 25 °C
1 % Duty Cycle
0.01 0.01
0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 20 40 60 80 100 120 140
FORWARD VOLTAGE, VOLTS PERCENT OF RATED REVERSE
VOLTAGE, (%)