Design References and Technical Standards 设计标准和规范 Specifications for Quality Programs for the Petroleum and Natural Gas Industry API Spec Q1 石油和天然气行业制造企业质量管理体系规范 Types and Basic Specifications for Drilling Rig SY/T5609 石油钻机型式与基本参数 Specification for Mast and base of Drilling and Work-over Rig API Spec 4F 钻井和修井井架底座规范
Drilling and Production Hoisting Equipment
API Spec 8A 8C 钻井和采油提升设备规范 Specification for Rotary Equipment API Spec 7 旋转钻井设备规范 Drilling Equipment API Spec 7K 钻井和修井设备 General procedures for the selection of drilling equipment API Spec D10 通用钻井设备选择程序规范 Drive roller chain of petroleum drilling rig API Spec 7F 油田链条与链轮 Wire Ropes API Spec 9A 钢丝绳规范
Recommended Area Classification for Oil Electrical Devices
API RP 500 石油装置用电气设备位置分类 General Technical Condition for Explosive Gas and Electrical Equipment IEC 爆炸性气体和电气设备通用技术条件 Electricity and Electrical Engineers Association Specification IEEE 电气工程师协会规范 Electrical Equipment with Electrical Components for Land Drilling Rig JB/T7845-1995 陆地石油钻机电控与配电设备标准规范 Specification for Choke and Kill Devices API spec 16C 节流压井设备 PRESSURE VESSELS API 510 压力容器检验规程 STAND PIPE LINES ASME SERIE B31 压力管道规范 1. Main parameters 1.主要参数 Hook load: 500,000 lbs, 250 US ton (2250KN) with 10 lines 钩载:2250KN(10 股) Mast type: 125’ two section telescoping type that is raised using hydraulic cylinders. 井架:38.5 米液压伸缩双节井架 Substructure type: Six leg foldable type, single section, swing up with screw jacks to secure in position, with rotary table base and setback base independent of each other. 钻台:六支腿可折叠型底座,单节,用螺旋千斤顶向上摆动以固定到位,转盘底座和立根架底座相 互独立。 Depth rating: 4 ½” Drill pipe: 13,300 ft (4000M), 5” DP 10,500 ft (3200M) 名义钻深范围:Ф114mm 钻杆:4000m/Ф127mm 钻杆:3200m Wind speed: No hook load & set back full of drill pipe: 68 mph (110 km/h) 抗风能力:无钩载,满立根 110 km/h Rotary beam capacity: 505,820 lbs, 250 US ton (2250KN) 转盘最大载荷:2250KN Setback capacity: 269,770lbs, 135 US ton (1200KN) 额定立根载荷:1200KN Rig floor height: 19.7 ft (6M) 钻台高度:6m Clear height below rotary beams: 16 ft (4.9M) 转盘梁底面净高:4.9m Rotary table size: 27.5” 转盘尺寸:27.5" Drill line size: 1¼in (32mm) 钻井钢丝绳尺寸:32mm Draw works: JC40DB 1000hp (735KW), single sided hydraulic disc brake 滚筒:JC40DB 1000hp (735KW),液压盘刹 Catheads: 2 ea, Mounted in mast section, rated at 22,480 ft lbs straight pull 液压猫头:2 个液压猫头 Winches: 2 x hydraulic winches Model YJ3B and YJ5B & 2 x air winches one monkey board and one at end of cat walk 液压绞车:2 台液压绞车,YJ3B 和 YJ5B Max. gross weight of trailer: 80,000kg 拖车最大重量:80,000kg Quantity of axles: 5 轴数:5 轴 Suspension system: Combination leaf springs + air suspension 悬架系统:组合板簧+空气悬架 Model towing pin: #90 towing pin (3-1/2 ") 拖销:90 号(3-1/2 ") Martin Decker RigSense 2.0 drilling instrumentation system 马丁戴克 2.0 钻井仪表系统(选配或国产替代) Gaitronics rig site communications system Gaitronics 钻机现场通信系统(国产替代) Mathey wireline unit complete with Totco 8 and 16 degree survey equipment (选配或国产替代) Operating temperature: -20ºC to +55ºC (cold weather or desert modifications on request) 工作温度:-20ºC 至+55ºC(寒冷或沙漠地区,可根据要求改造)