Professional Documents
Culture Documents
Factory fitted sleeve 1.6mm GSS Factory fitted Factory fitted Not Complied :
4 Sleeve thickness sheet Galvanized Steel Galvanized Steel EPC to Provide & fabricate 14 gauge (1.6
(14 Gauge) 20Ga 120 GSM 20Ga 120 GSM mm thick)GSS sheet factory fitted sleeve.
Recommended :
6 Stamping UL Stamping Provided Provided Subjected to provision of Fire damper
supplied with UL Stamped .
1of2
Re commanded :
CBRI tested & certified for 90 120 min. as per UL 120 min. as per UL Subjected to provide CBRI tested
min. rating 555 555 certificate compliance for the proposed
model.
7 Fire rating certification
Re commanded :
flame penetration as per UL
Provided as UL555 Provided as UL555 Subjected to provide UL stamping model
555-1995.(Under
testing standards testing standards & UL 555 certificate compliance for the
writers laboratories)
proposed model.
Recommended :
8 Stamping UL Stamping Provided Provided Subjected to provision of Fire damper
supplied with UL Stamped .
Note
Fire dampers should be provided in all the supply air ducts and return air ducts, return air passage in the air-handling unit
1
room and at all floor crossings. Access door will be provided in the duct before each set of fire dampers.
Damper should be fail safe design which enables the damper to automatically assume the Closed position when the duct
2
temperature reaches the design temperature of the fusible link
The damper should have lowest possible pressure drop and should be selected as per approved design air flow, air velocity
3
and minimum pressure drop.
The blade should remain in the air stream in open position & shall allow maximum free
4
area to reduce pressure drop & noise in the air passage.
As per list of approved makes for the MEP works Proposed make Caryaire is approved for the Fire damper under category_2
- EPC should submit required documents as per following at the time of delivery and joint inspection
5 1. Type test certificate for the similar item done.
2. OEM routine test certificate.
3. Visual check report.
2of2
Technical Data Sheet
For
Motorised Fire Damper
A General
1 Manufacturer : Caryaire Equipments India Pvt. Ltd.
2 Customer : AIRTECH ENGINEERS
3 Project : RAJKOT AIRPORT
4 Item : Motorised Fire Damper
5 Model : FSD-A
C ACTUATOR
1 Make : Belimo / Honeywell
2 Type : Electrical, Spring Return-UL-Listed
3 Power Supply : 24 V. AC
4 Model : FSLF-24 FSNF24 MS8120F
5 Make Belimo Belimo Honeywell
6 Torque : 3.5 NM 7.9 NM 20 NM