Professional Documents
Culture Documents
Applications
∙ Multifunction protection and control of medium and high voltage positions
∙ Subfrequency load shedding
∙ Bay unit in a distributed busbar protection scheme
0
EFx
4,9” display
8F 1F 9 8 7
6 5 4
OR
9F 2F F1
3 2 1
Graphical displays
01F 3F F2
R 0
CSE UNEM
I/O/L/R pushbuttons
21F 5F F4
31F 6F F5
1
8
2
9
Keyboard
0 R
INSULATION AND
ELECTROMAGNETIC TESTS MAIN FEATURES
Electromagnetic High precision in direct measurements (class 0.2 in currents and voltages)
compatibility IEC 60255-26 Wide range current inputs allowing the same device to be connected to 1 A and 5 A CT
requirements secondary
Dielectric withstand IEC 60255-27 Application software specifically designed for simple and user-friendly access to the
Insulation resistance equipment
IEC 60255-27
measurement Different hardware options allow to define the most suitable configuration for the application
Voltage impulse IEC 60255-27 Through the front USB you can access the equipment to retrieve reports and equipment
Electrostatic discharge CID, load an external CID, load the firewall configuration or update the equipment firmware
IEC 61000-4-2
immunity Synchronization from communications protocols, SNTP, IEEE 1588 v2 (PTP), demodulated
The technical data in this flyer are subject to change without prior notice. TF15IPT_PGA01_D/092023
Radiated radiofrequency IRIG-B input or PPS input, pacFactory or display
electromagnetic field IEC 61000-4-3 Web server for monitoring and setting without needing additional software
immunity
Cybersecurity features: sFTP, HTTPs, firewall, audit log, password accessing, RBAC, LDAP,
Electrical fast transient / session management...
IEC 61000-4-4
burst immunity
Depending on the model and the application, it can function as a Sampled Values (SV)
Surge immunity IEC 61000-4-5 emitter or receiver, following the IEC 61850-9-2 or IEC 61869-9 standards.
Immunity to conducted
disturbances, induced IEC 61000-4-6 HARDWARE OPTIONS
by radiofrequency fields
Power frequency
IEC 61000-4-8 Mounting options Boards options
magnetic field immunity
∙ 19” 4U rack (up to 6 I/O slots) ∙ CPU: 6 DI + 4 DO
Impulse magnetic field
IEC 61000-4-9 ∙ 11 DI + 9 DO
immunity
∙ 32 DI
Damped oscillatory ∙ 16 DI + 8 DO
IEC 61000-4-10
magnetic field immunity
∙ 16 DI + 16 DO
Immunity to conducted, ∙ 16 DI + 8 AI (mA)
common mode IEC 61000-4-16 ∙ 8 DI + 8 DO
disturbances ∙ 11 RTD + 4 AO
Ripple on DC input ∙ ½ x 19” 5U rack (up to 2 I/O slots) 100 Ω platinum, 100 Ω nickel, 120
IEC 61000-4-17
power port Ω nickel, 10 Ω copper
Damped oscillatory
IEC 61000-4-18
wave immunity Communication ports
Voltage dips, short Front:
interruptions and voltage IEC 61000-4-29 ∙ RJ45
variations immunity ∙ USB
Withstand to radiated Rear:
electromagnetic ∙ Up to 2 Ethernet (FO or RJ45)
IEEE 37.90.2
interference from ∙ Up to 6 serial (FO, RS232, RS485)
transceivers Optional
∙ High break contact outputs
∙ High speed outputs Power supply
CLIMATIC TESTS
∙ 24, 48, 125 and 220 Vdc
Cold IEC 60068-2-1 ∙ Power: 40 W
Dry heat IEC 60068-2-2 Optional IP54 front protection ∙ Optionally redundant power supply
Change of temperature IEC 60068-2-14
Damp heat cyclic IEC 60068-2-30
SOFTWARE
Damp heat steady IEC 60068-2-78
All the devices in the INGEPAC™ product range can be accessed using powerful software
External protection level IEC 60529
tools developed by Ingeteam which run on Windows®
Application specifically designed for simple and user-friendly access to the equipment
MECHANICAL TESTS
Vibrations IEC 60255-21-1 eFS
Shock and bump IEC 60255-21-2
Seismic IEC 60255-21-3
CYBERSECURITY