File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 Remove this netting and insert the parapet/handrail Screen shot 03 Description Data File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 Remove items
Screen shot 04 Description Data
File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 adjust the clash between the pipe and the structural profile and move the position of the flange above the grating Screen shot 05 Description Data File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 adjust the clash between the pipe and the structural profile and move the position of the flange above the grating
Screen shot 06 Description Data
File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 the principle of transportability also applies to walkways, creating connections. this principle must be respected for all Screen shot 07 Description Data File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 insert flange connection
Screen shot 08 Description Data
File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 insert the flange connections symmetrically Screen shot 09 Description Data Figure 1 Figure 2 Figure 3 File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 Figure 1: insert flange connection Figure 2: the handrail is attached to the pipe Figure 3 : the overhang of the walkway is really important, I suggest inserting flanged profiles to connect as indicated in the red arrows
Screen shot 10 Description Data
File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 the three vertical tubes under the sunshade, indicated by the red arrows are too long, insert flanged connections
Screen shot 11 Description Data
Figure 1 Figure 2 File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 Figure 1: insert flanged connections Figure 2: clash both on the right and on the left
Screen shot 12 Description Data
File: DMS-3D IFC-11-03-2024-rev27 13.03.2024
Screen shot 13 Description Data
File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 insert bolted connection using plate and counterplate
File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 insert flanged connections Screen shot 16 Description Data File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 move the current position of the flange connection
Screen shot 17 Description Data
File: DMS-3D IFC-11-03-2024-rev27 13.03.2024 move the current position of the flange connection