Professional Documents
Culture Documents
having polyester powder coating (Jotun / Akzonobel of equivalent) of 60 micron in colour and shade as detailed
in drawing or directed by the PM, aluminium shall conform to IS 63400 WP and extruded section shall be ready
to receive weather strips, EPDM gaskets anti-rattling wool piles etc. and hardware. Designing of section shall
5.7
account for designed loads as per IS 875 and IS 456-2000, Minimum thickness of aluminium to be 1.5 mm,
joinery with factory made mechanical junctions, concealed fixing and sealing with sealant around periphery etc.
as per approved shop drawing and sample. All items receiving fittings and fixtures shall be strengthened and
lapped as required.
- All fitting and fixtures such as lever locks, handles, hinges, concealed tower bolts, etc. shall be suited to
sections and be of approved make. They shall be finished in matching powder coating.
- Supply and fixing of aluminium work shall be carried out from approved agency.
- Prior to start of work supplier shall submit detailed full scale shop drawings including plan, elevation and
detail of fixing with structure for approval of the PM. Samples of each item on full scale or smaller scale as
directed by the PM shall be submitted for approval.
- Work shall proceed only on approval of shop drawing, samples of each extruded section, beading, gaskets,
wool pile, fittings and fixtures by the PM in writing.
- Glazing shall be as noted for each unit in drawing.
W01 - (Structural opening size - 1700mm x 2075mm ) Aluminum 2 track sliding window with 6mm thick clear
5.7.1 annealed glass + side fixed safety glass + clear cutout above fixed glass as per detail drawing. (Location:
Bedroom, Living)
W02 - (Structural opening size - 1550mm x 2075mm ) Aluminum 2 track sliding window with 6mm thick clear
5.7.1 annealed glass + side fixed safety glass + clear cutout above fixed glass as per detail drawing. (Location:
Bedroom, Living) (Flat no. 23,24 & 28)
5.7.2
W03 - Aluminum side hung window with 6mm thick frosted glass having fixed panel at top with provision for
5.7.3
exhaust fan (Structural opening size : 600mm x 1000mm) (Location: WC, Bath, Shaft at Refuge)
V1- Aluminium framed Ventilator with 4mm thick obscured glass louvers as per detail drawing. (Structural
5.7.4
opening size : 1200mm x 1200mm)
5.7.5 W05 - 1200mmx2075mm (location- staircase 1)
5.7.6 W04 - 1200mmx2075mm (location- staircase 2)
Sqm ₹ -
2,938
Sqm ₹ -
Sqm 855 ₹ -
Sqm 39 ₹ -
Sqm ₹ -
Sqm ₹ -