Professional Documents
Culture Documents
J METAL WORK
All ironmongery and fixing hardware for this section shall be high
quality heavy duty fittings in original make and rates shall include
for all necessary ironmongery. Note
Rates for all aluminium doors and windows shall include for sub
frames. Note
Rates for external glazed walling, doors and windows shall include
for suitable scaffolding for installation unless otherwise provided
separately. Note
The contractor shall submit the design calculation, details and other
required fixing shop drawings for the Engineers' approvals.
Note
All glass in external glazed doors and windows shall be as per the
schedule depend on the size of the opening as per manufacture's
instruction in an approved manufacture to suit with the specific
requirements. All glass shall be in approved make.
Note
Sealant, beadings and gaskets to be used, shall appropriate to the
climate of Sri Lanka and the environment of the location of this
project (specially close proximity to Airport and Industrial Estate of
Katunayake Free trade zone and air pollution should be considered
on a future) and necessary technical information's to be submitted
for prior approval. All joints to be sealed in an appropriate manner
and shall be in approved make silicon beading sealant with
structural silicon. All gaskets, rubber beading shall be in approved
make and colour.
Note
The Contractor shall submit a guarantee for fire rated doors from
the manufacturer of the fire doors. All fire rated doors shall be
manufactured by a reputed fire rated door manufacturer.
Note
Rates for fire rated doors shall include for all ironmongery
requirement for fire doors in high quality reputed manufacture
unless measured separately. Note
The bidderer shall submit the following details together with the
bid. Note
(a). Technical detail of the proposal
(b). Technical data. And performance characteristics
(c). Type and manufacturer of glass, aluminium
extrusions, panels, ironmongery, sealant,
beadings, frame work etc.,
(d). Country of manufacture of above items.
(e). Local Agent
(f). Method statement
(g). Samples of selected materials (frame, materials,
aluminium extrusions glass, framing, sealant,
beadings, ironmongery etc.,)
(h). Details of scaffolding system
(i). Proposal for fire barriers
(j). Method of fixing of glass to frame work
(k). List of ironmongery quoted for each item
Door
S1 -900 x2100mm nr
Windows
The Contractor shall refer the special specification for the external
glazing work. Note
Toilet partition
Toilet cubical partitioning system "Bescue" or equivalent in
approved thick water proofed laminated panel from reputed
manufacture up to celling height including doors, all fixing
accessories, ironmongery as per the detail drawing and specification
and to the approval & satisfaction of the Engineer in the following.
Staircase
Approx. 1200mm height 35x6mm size M/S flat plate uprights fix to
the step with stainless steel plates and anchor bolts and 3 nr 15mm
dia M/S rods passed through the mild steel post in an acceptable
manner and including 50x25mm M/S box section hand rail on top,
all fixing accessories, finishing and any other necessary
arrangements to complete as per the detail drawing in the following.
- HR20, HR21, HR22, HR23, HR15, HR16
Supply & fix approved thick tempered glass shower screen with
handle and door in an approved make and all complete including all
fixing accessories and any other necessary arrangements to
complete as per the detail drawing in the following.
External Zn/Al cladding for rain water disposal pipes from roof
slab level to basement floor level as per the drawing and
specification. Rate shall include painting and finishing work, all
fixing accessories and any other necessary arrangements to
complete as per the detail drawing and approval of the
Architect. m