Professional Documents
Culture Documents
Aim / At the end of this course, the learner will be able to:
Course Understand main aim of Electrical Installation
objective: Know important regulation and skill of Electrical Installation
Determine optimum place of electrical service entrance
Determine number of lamps required for a given room or
service
Know how to locate lamps and fittings in a given room
Determine cross sectional area of the conductor
Determine automatic circuit breaker rating (ACB) for any
residential and
commercial loads.
Know how to install street light installation.
Determine ACB rating for any industrial load
Select cable size of industrial load
Determine total power and maximum power of the system
Calculate electrical cost estimation of a given Electrical
Installation.
Prepare contract document preparation(Bill of Quantity)
Write Electrical Report
Design residential electrical installatio
Learni
Assignments/act
Topics to be covered ng
Chapter Week ivity (Tutorial
(Lecture hours) Outco
hours)
mes
Chapter- 1 2 1.1 Introduction 5.1.1, Lecture, and
Introduction 1.2 important regulation and skill of 5.1.2, group discussion.
to Electrical 5.1.3 Self-learning
Electrical Installation
Installation 1.3 Types of Electrical Installation
1.4 Procedure of Electrical
Installation
1.5 Optimum place of electrical
service entrance
2.1 Determining number of lamps
required for a
given room or service
2.2 Locating of lamps and fittings in
a given
Lecture, and
room
group discussion.
Chapter- 2 2.3 Determining cross sectional area 5.1.4,
2 Self-learning
Illumination of the 5.1.5
Group
conductor
assignment1,
2.4 Determining automatic circuit
breaker rating
(ACB) for any residential and
commercial
loads.
Chapter-3 3.1 Procedure of Selecting Cable Lecture, and
5.1.6,
Determining Size group discussion.
5.1.7,
Cable size and 2 3.2 Checking voltage drop of a cable Self-learning
5.1.8,
ACB rating of 3.3 Selecting rating of ACB Individual
5.3
a load 3.4 Street light installation assignment1,
4.1 Selecting ACB rating of 3 phase
5.1.9, Lecture, Lab
Chapter-4 IM
5.1.10, work and Self
Industrial 2 4.2 Selecting Cable Size of 3 phase
5.1.11, learning, Group
Installation IM
5.3 discussion
4.3 Checking voltage drop of a cable
5.1 Design Electrical Installation
Applying Auto
CAD Lecture, Lab
5.2.1,
Chapter-5 5.2 Calculating electrical cost work, and group
5.2.2,
Contracting of estimation of a discussion.
6 5.2.3,
Electrical given Electrical Installation Self-learning
5.2.4,
Installation 5.3 Preparing contract document Group
5.3
preparation(Bill assignment2,
of Quantity)
5.4 Writing Electrical Report
Behavior and Criteria/
submitting
Type Weight Assessment for
date
Learning
Mid semester
20%
Exam
Final semester
30%
Exam
Individual
5%
Assignment
Quiz 10 %
Lab Practice/
30 %
Report
Group assignment 5%
Total 100%