Professional Documents
Culture Documents
Greenable Solar Catalog (영문)
Greenable Solar Catalog (영문)
www.posco.com www.steel-n.com
POSCO’s Eco-Friendly Product Brand : Greenable
Green
Enable
'Greenable', a compound word for ‘Green’ and
'Enable', is a brand of steel products/solutions
for eco-friendly energy of POSCO.
•H
igh-strength steel plate
•S
teel for hydrogen
for wind tower •H
igh corrosion resistant
storage
•H
igh-efficiency electrical steel for solar mounting
•S
teel for welded pipe
steel for turbine motors structure and PV module
to transport ultra-high
•B
earing wear-resistant frame
pressure hydrogen
steel for turbines
Drawing a virtuous Steel is used in facilities that make green energy, and
that energy is then used to make steel again, enabling a
circle of steel and greener future.
energy Steel Enables a Green Tomorrow
Contents
POSCO’s Eco-Friendly Product Brand : Greenable 03
Solar Generation & Steel Products 04
Steel Products for Solar Mounting Structures 06
Solution for Solar Mounting Structures 08
Patent & Environment Product Declaration 10
Warranty 11
3|
Solar Generation & Steel Products Solar Generation & Steel Products
Solar Solar (Photovoltaic) generation converts energy from sunlight into electricity.
Product Characteristics
Generation PosMAC is superior to GI in corrosion resistance on flat, machined, cross-section parts and is superior to
galvalume in cross-section corrosion resistance.
PV Module ●
● Solar Mounting Structures Quality items PosMAC super PosMAC 3.0 GI
Purlin ●
The solar mounting structure supports the photovoltaic
module at an optimal angle to secure photovoltaic Hardness(Hv) of coating layer 190~210 110~130 60~80
power generation efficiency.
Beam ●
The structure must secure safety against external loads Friction characteristics ◎ ◎ ×
such as wind and snow, and it must perform the role of
a support structure without corrosion or deterioration
Flat sheet ◎ ◎ △
Brace ● during the lifetime of PV power plant.
Corrosion Bending ◎ ◎ △
resistance
Post
Cup ◎ ◎ △
Cross-section ◎ ◎ △
PosMAC
Comparison to Galvanized(GI(H)) in Corrosion Resistance on Flat Surfaces(CCT)
PosMAC (POSCO Magnesium Aluminium Alloy Coated Product) is a ternary alloy(zinc, Magnesium and Aluminium)
coated steel with high corrosion resistance developed with POSCO’s proprietary technology. PosMAC shows 5 to 10 times the corrosion resistance compared to galvanized steel sheet on flat surfaces
PosMAC is a corrosion resistant product that has 5 to 10 times stronger resistance than that of a normal hot-dip
galvanized steel sheet (GI, GI(H)) with the same coating weight. PosMAC Super PosMAC 3.0 HGI Z60
CCT1)
U300 M300 (600g/㎡)
The steel features good resistance to chemicals, red rust, acid and base when applied to surfaces and points of
machining. Its good hardness and high friction factor also provide good anti-galling and workability.
※P osMAC 3.0 is applicable to solar mounting structures installed at ISO corrosivity category C1~C4.
PosMAC super, which shows enhanced corrosivity resistance, is applicable to the site with ISO corrosivity Initial
category C1~CX or post directly rammed into ground.
|4 5|
Steel Products for Solar Mounting Structures Steel Products for Solar Mounting Structures
(Steel Products for Various PV Types) (Steel Products for Various PV Types)
Specification
SGH-490/540/690
Frame PosMAC-490/540/690
(300gsm or Over)
PosMAC-400/490/690
Specification Frame
(300gsm or ove
Fresh PosMAC-400/490
water (M300 or over)
Frame
Salty PosMAC-490/540
water (M430 or over, PosMAC super)
Scaffolding for
PoMAC-400
maintenance
|6 7|
Solution for Solar Mounting Structures Solution for Solar Mounting Structures
Development of PV systems in collaboration with customers Technical Solution for Entire Lifecycle of Solar Project
It is difficult to secure a site for solar power PJT. Through collaboration with customers, POSCO develops new solar POSCO supports clients' successful project by providing technical solutions for the entire life cycle.
power systems such as floating photovoltaic, building-installed photovoltaic, and agricultural photovoltaic using Mounting structure design regarding site environmental conditions, manufacturing, installation and maintenance.
high-performance specialized steel, and supports the expansion of renewable energy supply.
|8 9|
Patent & Environment Product Declaration Warranty
PosMAC Patent A total of 37 patents are registered for PosMAC technology. PosMAC Durability Warranty
NO. Patent No. Title of invention ● Recipient of Warranty
The zinc plating bath excellent in terms of corrosion resistance and The First Buyers purchasing POSCO products But, warranty can be issued on a (Solar Energy) Project Basis
01 KR10-0498092
galvanized alloy strip
Surface treatment composition for galvanized steel, surface treatment ● Warranty Period
02 KR10-0498092
method for galvanized steel and galvanized steel sheet 20 years (for coating weight 250g/㎡ or more), 25 years (for coating weight 300g/㎡ or more)
Zn alloy plated steel sheet having excellent weldability and processed - Type 1 : C1~C4 environments specified (ISO 12944-2 C1~C4)
03 KR10-1714935
part corrosion resistance and method for manufacturing same - Type 2 : Solar Energy project (project name, Installed area(longitude, latitude)
Hot dip Zn alloy plated steel sheet having excellent anti-corrosion and
04 KR10-1665912
method for manufacturing the steel: sheet using the same ● Warranty Contents
Zn alloy plated steel: sheet having excellent bendability and method for - Durability Warranty (not disrupted by perforation or rupture)Guaranteed only when the structure is made of bare
05 KR10-1819381
manufacturing same metal.
- Exceptions include application environment, surface damage, corrosion factor contact, etc.
※ It is not about red or white rust
| 10 11 |