Professional Documents
Culture Documents
Filter Cartridges
• air / gas filters
• glass microfibre
Performance Characteristics
400 200
180 0 barg
350 0 barg
5 2.5
Differential Pressure (mbar)
160
300
4 140 2.0
250
120
80 2 barg
150
2 barg
2 1.5
60
100
40
1 0.5
50
20
0 0 0 0
0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 700
Flow (Nm / hr) (air @ 21 °C)
3
Flow (Nm / hr) (air @ 21 °C)
3
Specifications
Materials of Construction Recommended Operating Conditions
Filtration Media: Glass Microfibre The maximum differential pressure in
Upstream Support: Polypropylene direction of flow (outside to in) is
Downstream Support: Polypropylene 3.5 barg (50.76 psig) at 20 °C (68 °F).
Inner Support Core: 316L Stainless Steel
Outer Protection Cage: Polypropylene The maximum recommended continuous
End Caps: Polypropylene operating temperature is 70 °C (158 °F).
End Cap Insert: Stainless Steel Note: For temperatures from 70 °C (158 °F) to 100 °C (212 °F)
Standard o-rings/gaskets: Silicone a special product with polyester supports is available.
Ordering Information
ZCHP - -
Code ǀ Length (Nominal) Code ǀ Micron Code ǀ Endcap (10¨) Code ǀ O-rings
1 10¨ (250 mm) 1.0 1.0 µm C BF / 226 Bayonet E EPDM
2 20¨ (500 mm) P BIO-X Retrofit S Silicone
3 30¨ (750 mm) V Viton
Parker domnick hunter has a continuous policy of product development and although the Company
reserves the right to change specifications, it attempts to keep customers informed of any alterations.
This publication is for general information only and customers are requested to contact our Process
Filtration Sales Department for detailed information and advice on a products suitability for specific
applications. All products are sold subject to the company’s Standard conditions of sale.
12/08 Rev. 3A