Professional Documents
Culture Documents
Q S
uality products are not enough. tandardized carton sizes. Large
Because if you want every product wraparound labels. Packaging that’s color
to be a quality product, you need a coded by product line. And - outside of
quality system. every box - a nice, clean picture of what’s inside
every box.
Every SCI product is manufactured to precise
standards, and inspected twice. All materials SCI’s Pro Pak System is a big idea that
and dimensions are carefully monitored and makes it possible for you to cut costs and
meet relevant standards, and the whole process improve service, simply by making it easier.
complies with ISO 9001 Standards. The SCI From shipping and handling to tracking and
Trademark on each product is 100% traceable, reordering. And, at the same time, you’ll be
because we’re 100% responsible. using your valuable warehouse space much
more efficiently.
Wherever we work - and we work all over
the world - exactly the same higher quality
standards and systems are used. Because SCI
Quality Plus means our 50-year reputation for
quality is built right in.
2
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
All in one place.
T
he SCI 5/50 Guarantee says we will
replace any pipe, valve or fitting for
up to a full five years, when properly
installed and operated, if failure is due to It’s all about time.
defects in material or workmanship.
W
e understand that time is money
Smith-Cooper will even pay $50 to the which is why everything we do is
installing contractor to offset the cost of designed to save you time. From our
installation (please see the SCI Warranty at Quality Plus and Pro Pak systems to our 5/50
www.smithcooper.com for details). Guarantee, Smith-Cooper service adds value to
each order you place.
We think that means we offer the highest
quality pipe, valves and fittings available. With locations on the East and West coasts,
Quality we stand behind for a full five years. Smith-Cooper also offers speedy delivery. Each
Which makes it just that much easier for you to order is packaged to the exacting standards you
offer your customers the same high standards of have come to expect from us, no matter where
quality and service. it ships. Since we pay more attention to you,
you have time to pay more attention to your
And that, in the end, is what we’re all here for. customers.
3
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
1” THROUGH 24”
Specifications
• COOPLOK™ grooved couplings and cast fittings through 12” are UL Listed and FM Approved
for use on schedule 10, schedule 40 steel pipe and sprinkler pipe (see below)
• Not for use in steam applications
• 16” through 24” fittings available upon request
• Canadian Registration Numbers available at www.smithcooper.com
• Manufacturing facility is ISO 9001:2000
• Quality management inspections at both the factory and our warehouses
• For your protection, the logo is marked on cast fittings, couplings, bolts, and gaskets
• Ductile iron conforms to ASTM A-536
• Groove dimension conforms to AWWA C606
• Electroplated track bolts conform to ASTM A-183 with a minimum tensile strength of 110,000 psi
• Magnetic particle inspection of each bolt
• Coatings of orange paint or hot dipped galvanized conforming to ASTM A153
• Gasket Grade E EPDM (green stripe) -30˚F (-34˚C) to +230˚F (+110˚C)
• Gasket Grade T Nitrile (orange stripe) -20˚F (-29˚C) to +180˚F (+82˚C)
• Replacement part list available at www.smithcooper.com
Eddylite® , Eddy Flow® , Eddy Thread 40® Bull Moose Tube Co.
Table of Contents
Lightweight Flexible Couplings...................... 1-2 Concentric Reducer - Grooved x Male NPT ....18
Lightweight Rigid Couplings ......................... 3-4 Eccentric Reducers..........................................19
Standard Weight Flexible Couplings.............. 5-6 Short Radius Elbow.........................................20
Standard Weight Rigid Couplings ................. 7-8 Short Radius Tee .............................................20
Reducing Coupling ............................................9 Drain Cap .........................................................20
Hinged Flange Adapter ....................................10 Drain Elbow .....................................................20
Standard Radius Elbows ........................... 11-12 Mechanical Tee, Threaded ......................... 21-22
Standard Radius Tee .......................................13 Mechanical Tee, Grooved ................................23
Standard Radius Cross ...................................13 Strap Tee .........................................................24
Grooved x Flange Adapter ...............................13 UL/FM Wafer Butterfly Valve ...........................25
Cap ..................................................................14 UL/FM Grooved End Butterfly Valve................26
Adapter Elbow .................................................14 Grooved End Butterfly Valve ...........................27
Reducing Tee ...................................................15 COOPLET® Adapter Nipples ............................28
Reducing Tee - Grooved x Male NPT ..............16 Groove Specifications................................ 29-30
Concentric Reducer .........................................17 Installation Instructions ...................................31
C B
1
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Lightweight Flexible Couplings with Triple Seal Gasket
C B
2
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Lightweight Rigid Couplings
3
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Lightweight Rigid Couplings with Triple Seal Gasket
6
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Standard Weight Rigid Couplings
Fig. 65SR & 66SR
Standard Weight Rigid Coupling with “C” Gasket
• Maximum working pressure depending on the size and schedule of the
pipe being used:
1” to 6” - 1000 psi (68.9 bar)
8” - 800 psi (55.1 bar)
10” & 12” - 600 psi (41.3 bar)
14” to 20” - 300 psi (20.6 bar)
24” - 250 psi (17.2 bar)
• 14” and larger are not UL Listed or FM Approved
• All bolts, gaskets and housings identified by SCI logo
• 100% magnetic particle inspection of each bolt. Each bolt has a
B minimum tensile strength of 110,000 psi
• Gaskets are pre-lubricated
• Gasket Grade E EPDM (green stripe) -30˚F (-34˚C) to +230˚F (+110˚C)
• Gasket Grade T Nitrile (orange stripe) -20˚F (-29˚C) to +180˚F (+82˚C)
• Other gasket materials available by special order
A • Ductile iron housings conform to ASTM A-536
• Groove dimensions to AWWA C606
• Orange paint or hot dipped galvanized conforming to ASTM A153
• Smith-Cooper Warranty only applies to assemblies made with gaskets,
housings and bolts carrying the logo
8
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Reducing Couplings
Reducing Gasket
C
9
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Hinged Flange Adapter
B
65F SI 150
˝
H4
AN
A C
Hinged Flange
Adapter Gasket
10
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Standard Radius Grooved Fittings
11
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Standard Radius Grooved Fittings
12
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Standard Radius Grooved Fittings
Nominal Part Number
A Case Weight
Pipe Size
Painted Galvanized IN / mm Qty LB / kg
Fig. 65T & 66T IN / mm
1-1/4 2.75 1.4
Tee, Standard Radius 32
65T 3012 66T 3012
69.9
35
0.6
• Ductile iron - full flow (1-1/4” to 12”) 1-1/2
65T 3014 66T 3014
2.75
24
1.7
40 69.9 0.8
• Fabricated steel; not UL/FM (14” and larger) (F) 2 3.25 3.1
65T 3020 66T 3020 15
• 16” through 24” fabricated; available upon request 50 82.6 1.4
2-1/2 3.75 4.1
65T 3024 66T 3024 7
65 95.3 1.8
3 4.25 5.8
65T 3030 66T 3030 10
80 108.0 2.6
4 5.00 10.0
65T 3040 66T 3040 5
100 127.0 4.5
6 6.50 22.3
65T 3060 66T 3060 -
A
150 165.1 10.0
8 7.75 41.0
65T 3080 66T 3080 -
200 196.9 18.5
10 9.00 73.8
A 65T 3100 66T 3100 -
254 229.0 33.5
12 10.00 93.2
65T 3120 66T 3120 -
305 254.0 42.3
14 12.00 104.0
65T 3140F 66T 3140F -
350 305.0 47.2
14
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Standard Radius Grooved Fittings
16
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Standard Radius Grooved Fittings
17
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Standard Radius Grooved Fittings
18
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Standard Radius Grooved Fittings
19
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Short Radius Fittings & Drain Fittings
C
4" x 3"
21
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Mechanical Tee, Threaded (cont.)
Fig. 65MT & 66MT
Mechanical Tee, Threaded
• Maximum working pressure 500 psi (34.5 bar) depending on the size
and schedule of the pipe being used
• Equivalent length in feet of schedule 40 outlet pipe with a
Hazen-Williams coefficient of 120 per UL 213
• All bolts and gaskets identified by SCI logo
• 100% magnetic particle inspection of each bolt. Each bolt has a
minimum tensile strength of 110,000 psi
• Gaskets are pre-lubricated
• Gasket Grade E EPDM (green stripe) -30˚F (-34˚C) to +230˚F (+110˚C)
• Ductile iron housings conform to ASTM A-536
• Groove dimensions to AWWA C606
B
A 65MT • Smith-Cooper Warranty only applies to assemblies made with gaskets,
housings and bolts carrying the logo
C
4" x 3"
23
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Strap Tee, Threaded
A 65MU
24
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Fire Protection Wafer Butterfly Valve with Gear Operator
Fig. 67BFVWET
Wafer End Butterfly Valve with Indicator
• 300 psi
• UL/ULC Listed
• FM Approved
• California State Fire Marshall Approval No. 7770-1740:100
• Factory installed replaceable double tamper switch
• Approved for indoor and outdoor use
• Grooved ends 6 7
• Gear operated
H : DISC CLEARANCE OF
BODY SURFACE
THROUGH END OF
DISC IN THE
OPEN POSITION.
1
H
C
No. Part Material Specification
5.9
1 Body ASTM A-536 DI, Nylon-11 Coated
F
2 Disc ASTM A-536 DI, EPDM Encapsulated
4
3 Upper and Lower Stems AISI Type 420 Stainless Steel
4 Input Shaft AISI Type 410 Stainless Steel
5 Gear Housing ASTM A-536 Ductile Iron
5.0
2.4
E
TAMPER
A
2
B
25
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Fire Protection Grooved End Butterfly Valve with Gear Operator
Fig. 67BFVGET
Grooved End Butterfly Valve with Indicator
• 300 psi
• UL/ULC Listed
• FM Approved
• California State Fire Marshall Approval No. 7770-1740:100
• Factory installed replaceable double tamper switch
• Approved for indoor and outdoor use 7
• Grooved ends
• Gear operated
5
® 8
D
1
B
No. Part Material Specification
5.9
1 Body ASTM A-536 DI, Nylon-11 Coated
C
2 Disc ASTM A-536 DI, EPDM Encapsulated 4
E
RESISTANT
A
FASTENER
9 O-Rings (All) EPDM 9
26
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Grooved End Butterfly Valve - Lever Handle & Gear Operator
Fig. 67BFVG
Grooved End Butterfly Valve
• 300 psi
• EPDM 200° F maximum working temperature
• NBR 180° F maximum working temperature
• 10-Position lever handle or gear operator
• Grooved ends
ØD
d ØD1
Ød1
A
1
C
No. Part Material Specification
2
1 Body ASTM A-536 Ductile Iron
2 Disc ASTM A-536 Ductile Iron with
either EPDM or NBR Coating 3
B
Fig. 61GB4 Size
Part Number
A B Case Weight
Sch 40 Grooved x Bevel IN IN IN Qty LB
1x3 61GB4010030 3.00 1.32 150 0.3
Adapter Nipples 1x4 61GB4010040 4.00 1.32 100 0.5
1-1/4 x 4 61GB4012040 4.00 1.66 50 0.6
• All grooves cut grooved 1-1/2 x 4 61GB4014040 4.00 1.90 50 0.7
2x4 61GB4020040 4.00 2.38 25 1.1
• Bevel 37½° 2-1/2 x 4 61GB4024040 4.00 2.88 27 1.6
3x4 61GB4030040 4.00 3.50 18 2.4
A 4x6 61GB4040060 6.00 4.50 8 5.1
5x6 61GB4050060 6.00 5.56 2 6.6
6x6 61GB4060060 6.00 6.63 2 8.6
8x6 61GB4080060 6.00 8.63 2 13.2
B 28
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Standard Roll Groove Specifications AWWA C606
A B T
OD C
Column 1
Nominal IPS pipe size.
Nominal metric pipe D
size.
Column 2
IPS outside diameter. 1 2 3 4 5 6 7 8
Metric outside Pipe Outside Diameter Gasket Groove
Nominal Groove Diameter (C) Groove Min. Max
diameter. (OD) Seat (A) Width (B)
IPS Pipe Tolerance Depth (D) Wall Flare
± 0.03 IN ± 0.03 IN Tolerance
Column 3 & 4 Size Actual
+ - ± 0.77 mm ± 0.77 mm
Actual (Ref.) Thick. (T) Dia.
+0.0000
For IPS pipe, the IN / mm IN / mm IN / mm IN / mm IN / mm IN / mm
IN / mm IN / mm IN / mm IN / mm
IN / mm
maximum allowable
tolerance from square 1 1.315 +0.015 –0.015 0.625 0.281 1.190 –0.015 0.062 0.065 1.360
cut ends is 0.030˝ for 25 33.7 +0.381 –0.381 15.875 7.137 30.226 –0.381 1.575 1.575 34.5
1 - 3-1/2˝, 0.045˝ for 1-1/4 1.660 +0.015 –0.015 0.625 0.281 1.535 –0.015 0.062 0.065 1.705
4 - 6˝ and 0.060˝ for 32 42.4 +0.381 –0.381 15.875 7.137 38.989 –0.381 1.575 1.575 43.3
sizes 8˝ and above, 1-1/2 1.900 +0.015 –0.015 0.625 0.281 1.775 –0.015 0.062 0.065 1.945
measured from a 40 48.3 +0.381 –0.381 15.875 7.137 45.085 –0.381 1.575 1.575 49.4
true square line. For
metric size pipe, the
2 2.375 +0.024 –0.024 0.625 0.344 2.250 –0.015 0.062 0.065 2.447
50 60.3 +0.610 –0.610 15.875 8.738 57.150 –0.381 1.575 1.575 62.2
maximum allowable
tolerance from square 2-1/2 2.875 +0.029 –0.029 0.625 0.344 2.720 –0.018 0.078 0.083 2.962
cut ends is 0.75mm 65 73.0 +0.737 –0.737 15.875 8.738 69.088 –0.457 1.981 2.108 75.2
for sizes 25 - 80mm, 3 3.500 +0.035 –0.031 0.625 0.344 3.344 –0.018 0.078 0.083 3.566
1.15mm for sizes 100 80 88.9 +0.889 –0.787 15.875 8.738 84.938 –0.457 1.981 2.108 90.6
- 150mm and 1.50mm 3-1/2 4.000 +0.040 –0.031 0.625 0.344 3.834 –0.020 0.083 0.083 4.071
for sizes 200mm and +1.016 –0.787 15.875 8.738 97.384 –0.508 2.108 2.108 103.4
* *
above, measured from
4 4.500 +0.045 –0.031 0.625 0.344 4.334 –0.020 0.083 0.083 4.576
a true square line.
100 114.3 +1.143 –0.787 15.875 8.738 110.084 –0.508 2.108 2.108 116.2
Column 5 5 5.563 +0.056 –0.031 0.625 0.344 5.395 –0.022 0.084 0.109 5.650
The groove must 125 141.3 +1.422 –0.787 15.875 8.738 137.033 –0.559 2.134 2.769 143.5
be of uniform depth 6 6.625 +0.063 –0.031 0.625 0.344 6.455 –0.022 0.085 0.109 6.719
around the entire pipe 150 168.3 +1.600 –0.787 15.875 8.738 163.960 –0.559 2.159 2.769 170.7
circumference (see 8 8.625 +0.063 –0.031 0.750 0.469 8.441 –0.025 0.092 0.109 8.719
Column 6).
200 219.1 +1.600 –0.787 19.050 11.913 214.401 –0.635 2.337 2.769 221.5
Column 6 10 10.750 +0.063 –0.031 0.750 0.469 10.562 –0.027 0.094 0.134 10.844
Groove depth: for 250 273.0 +1.600 –0.787 19.050 11.913 268.275 –0.686 2.388 3.404 275.4
reference only. Groove 12 12.750 +0.063 –0.031 0.750 0.469 12.531 –0.030 0.109 0.156 12.844
must conform to the 300 323.9 +1.600 –0.787 19.050 11.913 318.287 –0.762 2.769 3.962 326.2
groove diameter “C” 14 14.000 +0.063 –0.031 0.938 0.469 13.781 –0.030 0.109 0.156 14.094
listed in Column 5. 350 355.6 +1.600 –0.787 23.825 11.913 350.037 –0.762 2.769 3.962 253.0
Column 7 16 16.000 +0.063 –0.031 0.938 0.469 15.781 –0.030 0.109 0.165 16.094
Minimum allowable 400 406.4 +1.600 –0.787 23.825 11.913 400.837 –0.762 2.769 4.191 408.8
wall thickness which 18 18.000 +0.063 –0.031 1.000 0.469 17.781 –0.030 0.109 0.165 18.094
may be roll grooved. 450 457.6 +1.600 –0.787 25.400 11.913 451.637 –0.762 2.769 4.191 459.6
20 20.000 +0.063 –0.031 1.000 0.469 19.781 –0.030 0.109 0.188 20.094
Column 8
500 508.0 +1.600 –0.787 25.400 11.913 502.437 –0.762 2.769 4.775 510.4
Maximum allowable
pipe end flare 24 24.000 +0.063 –0.031 1.000 0.500 23.656 –0.030 0.172 0.218 24.100
diameter. Measured at 600 609.6 +1.600 –0.787 25.400 12.700 600.862 –0.762 4.369 5.53 612.1
the most extreme pipe
end diameter of the
gasket seat area.
29
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Standard Cut Groove Specifications AWWA C606
A B T
OD C
1 2 3 4 5 6 7
Pipe Outside Diameter Gasket Groove
Nominal Groove Diameter (C) Groove Min.
Column 1 (OD) Seat (A) Width (B)
Nominal IPS pipe size. IPS Pipe Tolerance Depth (D) Wall
± 0.03 IN ± 0.03 IN Tolerance
Nominal metric pipe size. Size Actual
+ - ± 0.77 mm ± 0.77 mm
Actual (Ref.) Thick. (T)
+0.0000
IN / mm IN / mm IN / mm IN / mm IN / mm IN / mm
IN / mm IN / mm IN / mm
IN / mm
Column 2
IPS outside diameter. 1 1.315 +0.015 –0.015 0.625 0.312 1.190 –0.015 0.062 0.133
Metric outside diameter. 25 33.7 +0.381 –0.381 15.875 7.925 30.226 –0.381 1.575 3.378
1-1/4 1.660 +0.015 –0.015 0.625 0.312 1.535 –0.015 0.062 0.140
Column 3 & 4 32 42.4 +0.381 –0.381 15.875 7.925 38.989 –0.381 1.575 3.556
For IPS pipe, the maximum 1-1/2 1.900 +0.015 –0.015 0.625 0.312 1.775 –0.015 0.062 0.145
allowable tolerance from square 40 48.3 +0.381 –0.381 15.875 7.925 45.085 –0.381 1.575 3.683
cut ends is 0.030˝ for 1 - 3-1/2˝, 2 2.375 +0.024 –0.024 0.625 0.312 2.250 –0.015 0.062 0.154
0.045˝ for 4 - 6˝ and 0.060˝ for 50 60.3 +0.610 –0.610 15.875 7.925 57.150 –0.381 1.575 3.912
sizes 8˝ and above, measured
2-1/2 2.875 +0.029 –0.029 0.625 0.312 2.720 –0.018 0.078 0.187
from a true square line. For metric
65 73.0 +0.737 –0.737 15.875 7.925 69.088 –0.457 1.981 4.750
size pipe, the maximum allowable
tolerance from square cut ends 3 3.500 +0.035 –0.031 0.625 0.312 3.344 –0.018 0.078 0.188
is 0.75mm for sizes 25 - 80mm, 80 88.9 +0.889 –0.787 15.875 7.925 84.938 –0.457 1.981 4.775
1.15mm for sizes 100 - 150mm 3-1/2 4.000 +0.040 –0.031 0.625 0.312 3.834 –0.020 0.083 0.188
and 1.50mm for sizes 200mm * * +1.016 –0.787 15.875 7.925 97.384 –0.508 2.108 4.775
and above, measured from a true 4 4.500 +0.045 –0.031 0.625 0.375 4.334 –0.020 0.083 0.203
square line. 100 114.3 +1.143 –0.787 15.875 9.525 110.084 –0.508 2.108 5.156
5 5.563 +0.056 –0.031 0.625 0.375 5.395 –0.022 0.084 0.203
Column 5 125 141.3 +1.422 –0.787 15.875 9.525 137.033 –0.559 2.134 5.156
The groove must be of uniform
depth around the entire pipe 6 6.625 +0.063 –0.031 0.625 0.375 6.455 –0.022 0.085 0.219
circumference (see Column 6). 150 168.3 +1.600 –0.787 15.875 9.525 163.960 –0.559 2.159 5.563
8 8.625 +0.063 –0.031 0.750 0.437 8.441 –0.025 0.092 0.238
Column 6 200 219.1 +1.600 –0.787 19.050 11.100 214.401 –0.635 2.337 6.045
Groove depth for reference only. 10 10.750 +0.063 –0.031 0.750 0.500 10.562 –0.027 0.094 0.250
Groove must conform to the 250 273.0 +1.600 –0.787 19.050 12.700 268.275 –0.686 2.388 6.350
groove diameter “C” listed in 12 12.750 +0.063 –0.031 0.750 0.500 12.531 –0.030 0.109 0.279
Column 5. 300 323.9 +1.600 –0.787 19.050 12.700 318.287 –0.762 2.769 7.087
14 14.000 +0.063 –0.031 0.938 0.500 13.781 –0.030 0.109 0.281
Column 7
350 355.6 +1.600 –0.787 23.825 12.700 350.037 –0.762 2.769 7.137
Minimum allowable wall thickness
which may be cut grooved. 16 16.000 +0.063 –0.031 0.938 0.500 15.781 –0.030 0.109 0.312
400 406.4 +1.600 –0.787 23.825 12.700 400.837 –0.762 2.769 7.925
18 18.000 +0.063 –0.031 1.000 0.500 17.781 –0.030 0.109 0.312
450 457.6 +1.600 –0.787 25.400 12.700 451.637 –0.762 2.769 7.925
20 20.000 +0.063 –0.031 1.000 0.500 19.781 –0.030 0.109 0.312
500 508.0 +1.600 –0.787 25.400 12.700 502.437 –0.762 2.769 7.925
24 24.000 +0.063 –0.031 1.000 0.563 23.656 –0.030 0.172 0.375
600 609.6 +1.600 –0.787 25.400 14.300 600.862 –0.762 4.369 9.525
NOTES:
1. For grooving pipe with wall thickness less than “T” (Column 7), see Roll Groove Specifications.
2. Gasket seat and groove must be smooth and free from scores, seams, chips, rust or scale which may interfere with proper coupling assembly.
3. Out of roundness: difference between maximum OD and minimum OD measured at 90° must not exceed total OD tolerance listed.
4. All tolerances not shown are to comply with latest ASME or ASTM specification applicable to material being used.
30
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Installation Instructions for Couplings
Step 1: Check to ensure that gasket is suitable for intended service.
Step 2: Gasket is pre-lubricated (additional lubrication may be necessary).
Step 3: Remove any dirt or debris from gasket and pipe ends.
Step 4: Install gasket by placing it over pipe, ensuring that gasket lip does not overhang pipe end.
Step 5: Bring both pipe ends together ensuring proper alignment and slide gasket into position properly centered between the grooved por-
tions of each pipe.
Step 6: Place coupling housings over gasket so that housing keys fully engage into grooves. Insert bolts into couplings and rotate nuts until
finger tight. Wrench-tighten bolts alternately to the torque requirements shown below.
Adapter Size Flange Bolt Torque Adapter Size Latch Bolt Torque
2˝ – 2-1/2˝ – 3˝ 100-130 ft./lbs. (135-175 N/M) All Sizes 40 ft./lbs. (55 N/M)
4˝ – 6˝ 200-250 ft./lbs. (270-340 N/M)
8˝ 300-400 ft./lbs. (400-540 N/M)
10” & 12” 400-500 ft./lbs. (540-670 N/M)
SHARED
FLANGE LATCH
BOLT BOLT
HOLE
SUPERVISORY TAMPER
SWITCH CIRCUITS
FIRE ALARM CONTROL PANEL
(VALVE FULLY OPEN) SUPERVISORY CIRCUIT
OPEN (RED)
NC
S1 CLOSED (YELLOW)
COM NO END OR LINE RESISTANCE
OR NEXT DEVICE
COMMON (WHITE)
GREEN
ACTUATOR CASE GROUND
OPEN (ORENGE)
NC VOLTAGE
S2 CLOSED (BLUE)
SOURCE
COM NO
COMMON (BLACK) AUXILIARY SIGNAL DEVICE
(BELL OR HORN)
Notes
33
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
Notes
34
SMITH-COOPER INTERNATIONAL® • TOLL FREE 1-800-766-0076 • FAX (323) 890-4456 • www.smithcooper.com
COOPLOKTM Grooved Ductile Iron
Forged Steel Fittings
2000#, 3000#, 6000# • Thrd & S/W COUPLINGS, FITTINGS & VALVES Thread Fittings
1/8” – 4” 1” - 24” UL/FM @ 500 PSI
1/2” - 2-1/2”