Professional Documents
Culture Documents
Specifications
NA-127XB1 NA-128XB1
Rated voltage 220-240 V ~ Operating Instructions
Rated frequency 50 Hz
Rated power
Washing Machine
consumption 2050 W 2050 W (Household use)
Operating Instructions
Rated washing
7 kg 8 kg
capacity
Rated dewatering
7 kg 8 kg
capacity
Rated water
consumption for 18 L 22 L
washing
Water consumption
(L/work cycle) 56 64
X0718-0
Printed in China
Table of Contents Safety Precautions (Please observe them fully)
Be sure to follow the safety precautions
Operating Instructions Operation Methods described below to prevent injury or
property losses to the user or others.
Warning
Operating Instructions
Safety Precautions (Please observe Program list …………………… 18
them fully) …………………………3 Operation Method ………………… 20 ■ Ignoring or incorrectly understanding During Operation
Name of Parts ……………………… 6 Optional Functions………………… 21 these symbols may result in the following
Be sure to pull the power plug out of the
consequences.
Placement Location ………………7 Timed operation …………………… 21 socket and turn off the water tap after
operation!
Carrying the Machine ………………7 Child Lock …………………………… 21 Warning
Installation of Bottom Plate …………7
This describes issues which may
Set-in Installation ……………………7 cause serious injury. The washing machine may be
Placement Location Maintenance and Care damaged by lightning.
Water leaks or flooding may occur due to
and Product Dimension ………………7
Installation
Maintenance and Care 22 Caution overpressure of water.
Safety Precautions
…………………………8 This describes issues which may
How to Remove Anchor Bolts Machine Body ………………………22 Do not place the washing machine on a damp
Used for Transport ………………… 8 Detergent Container ………………22 cause personal injury or property place such as in a bathroom or exposed to
damages. the outside weather!
Horizontal Adjustment ………………8 Door Glass and Door Gasket 23
Water Inlet & Drain Hoses and Pump Filter …………………………23 ■ Items to be observed are distinguished
Power Cords ………………………9 Filter Mesh of Inlet Valve …………24 using the following symbols and described Do not use the washing
as follows. machine at places
Tightening Drain Hose ………………9 Preventing frozen water inlet & drain
exposed to water.
Connecting the water Inlet hose ……9 hoses and internal connection
This may cause electric shock, fire, failure and
hoses ………………………… 24 Indicates prohibited items. deformation.
Drain Hose ……………………………10
Connecting Power ……………………10 If Required Do NOT connect to the hot water supply!
Check after Installation ……………11 This may result in deformation of
Installation Checklist ………………11 Fault Checklist …………………… 25 indicates items that must or damage to the plastic parts of
be obeyed. the water inlet hose, causing
Trial operation after installation ……11 Abnormal Display ………………… 27 water leaks, electricity leaks or
Preparations before Washing ………12 Specifications ………… Back cover Prohibited electric shock.
Descriptions of Operating Buttons 15 Immediately stop using the machine and pull Keep flammable chemicals away from the
Detergent - Softener (How to Add) 17 out the power plug in case of the following washing machine, for example, kerosene,
situations. Contact the service provider as gasoline, light gasoline, thinner, alcohol, or
recognized by Panasonic to check and repair clothing soaked with these chemicals!
the machine!
·The washing machine does not start when it is powered. thinner
benzine
kerosene
gasoline
machine is operating.
Prohibited
May result in smoke, fire or
electric shock. They may cause an explosion or a fire.
Keep sources of ignition, such as candles or When you are cleaning your washing machine,
cigarettes, away from the machine. do not apply water directly to any part
of the washing machine.
No water sprinkling
No smoking It may cause short circuit
They may cause fire or deformation. and electric shock.
2 New hose-sets supplied with the appliance are to be used and that old hose-sets 3
should not be reused.
Warning Warning
Power . Wires To prevent injury Power - Power cords
Operating Instructions
The power socket must be used independently, Do NOT dismantle, repair or modify the Do not drag the power cords when pulling out Y connection is applied for the power cords.If
unidirectional, with two poles and a ground washing machine! the power plug. Please hold the plug with the power cords is damaged, it must be replaced
wire, rated at 10A, 220-240V ~ ! hands when pulling it out! by the manufacturer, its serviceagent or similarly
qualified persons in order to avoid a hazard.
If the power socket is used together Electric shock or short circuit may occur,
with other appliances, fire may which may cause fire. Otherwise, there may be negative
No dismantling
occur due to heating. consequences.
Otherwise, it may result in fire or injury. Never use the socket if the socket hole is
●If repairs are needed, contact your loose, and never use damaged power cords A single-phase power plug, with a ground wire
Ensure the power plug is fully inserted into the at both poles, shall be used. Reliable grounding
household mains socket! local Customer Service Centre. and power plug!
shall be ensured! If a grounding unit is not
Otherwise, a loose connection may Children should be supervised to ensure that installed, static electricity may be generated
overheat and cause an electric they do not enter the drum. Do NOT place a Prohibited
Safety Precautions
at the case boy or other metal parts!
shock or fire. chair or a similar object close to the washing
●Never use a damaged power cords machine! Otherwise, it may cause electric Electric shock may occur
or loose power socket. shock, short circuit and fire. in case of a fault or electric
Remove any dust which may accumulate ●Please contact your customer service center Must be leaks.
around the power plug. for repair if needed. grounded
When dust has accumulated on and Prohibited
around the power plug, and the dust
gets damp or wet, the insulation plug
become defective and may causes
There is a risk of injury if a child has entered
the drum.
Do NOT touch the laundry inside the drum
Warning
fire. until it has completely stopped! During Operation To prevent injury
● Pull out the power plug, and wipe off
dampness with a dry cloth. BE CAREFUL not to get laundry caught in the Do not wash, rinse or spin the waterproof
door seal when the door is closed. sheets and garments!
Avoid any actions that may damage the power
cords and power plug. (Do not cause damages Never touch This may result in a water (For example) sleeping bags, diapers,
to them; Do not fabricate them; Keep away from You may be injured if your hands are wrapped leak or damage to the sauna bathrobe, rubber driver's suits,
a heating appliance; Do not excessively bend, by the clothes even if the drum spins slowly. Be laundry during the wash skiing clothes and covers for bikes,
torsion, extend or bind them or place heavy sure to protect the children against such risks. Prohibited cycle.
motorcycles and automobiles.
objects on them). Avoid collision of the door glass by a hard The water pressure for the washing machine is Prohibited
Using the damaged power cords and object to 0.03-1MPa! Otherwise, personal injury or damage to the
power plug may cause electric shock, 0.03-1 MPa machine, wall, ground or clothing, or water
prevent the glass from breaking,
short circuit and fire. leaks may occur due to vibrations or rotation
Prohibited which may cause injury!
during the spin cycle.
Please consult the service center for repairs Prohibited Water leaks may occur at both ends of the Do not climb up or put heavy objects on the
of the power cords and power plug. water inlet hose in case of overpressure. top of the machine!
Do NOT slide your hand (or unprotected foot)
underneath the washing machine when in use! Ensure that the water tap and water inlet pipe You may be injured due to set
Always pull the power plug out of the power joint are reliably installed. Make sure that the deformation or breakage of
supply before cleanup or maintenance! It may cause injury. inlet hose has been fully inserted into the the washing machine. The
inlet hose joint or into the special water tap objects placed on the top
Prohibited purchased separately. Do not insert or pull may drop and break due to
out the inlet hose frequently to prevent Prohibited
vibrations during operation.
This appliance is not intended for use by looseness of the inlet hose or wear of the
Plug MUST Otherwise, electric shock Please remove the cover when discarding the
persons (including children) with reduced waterproof washer for the inlet hose joint.
be pulled out or injury may occur. washing machine!
physical, sensory or mental
Do NOT touch the power plug with wet hands! capabilities, or lack of experience May cause water leaks or fire
and knowledge, unless they have due to changes in water pressure. Otherwise, a child may be locked in
been given supervision or the drum in extreme situations.
Prohibited instruction concerning use of the Prohibited
appliance by a person responsible
No touching Doing so may cause for their safety.
with wet hands an electric shock. May cause fire or serious injury.
4 5
maximum capacity of dry cloth is 7 kg (NA-127XB1L01, NA-127XB1W01)
or 8 kg (NA-128XB1L01, NA-128XB1W01).
Name of Parts Placement Location
Detergent Container
(see P17) Carrying the Machine Set-in installation
- You need a space of at least 64 cm wide. Provide
Operating Instructions
Drum The washing machine must be
at least 2 mm of clearance on both sides and at
(washing/ spin-drying tub) carried by 2 people. least 5 mm of clearance 5 cm on the top and 3 cm
on the back of the machine.
- Be sure to insert the power plug into the
independent dedicated household socket.
Make sure the socket is placed at such a
Power cords/ plug place that enables you to easily pull out the plug.
Never bind the power
cords when using them.
Door
Start by tilting the appliance backwards.
Name of Parts
Placement Location
The appliance should be carried by two
Drain hose people, one on each side holding it from
the bottom.
Installation of Bottom Plate
Place the washing machine in such a way that it is
Door gasket inclined backward.Insert the end without holes
Drain filter
(see P23)
Into the box at the rear of the washing machine. Placement Location and
Adjusting feet Press the bottom plate to make it bend slightly, Product Dimension
and insert the front end into the box of the washing
(see P8) Make sure there is enough space for the
machine. Fasten two screws at the left and right washing machine.
respectively (Notes: the screws have been supplied
Accessories in the accessories).
169
Please ensure that all accessories are supplied with the machine.
Cover cap (4) (see P8) Inlet hose (1) (see P9) Notes:
845
- Install the bottom plate before removing the
anchor bolts. Make sure the inclined position
of the washing machine is reliable and a person
standing nearby helps to support the machine
with hands. 490(7 kg)
595
- When installing the bottom plate, make sure 555(8 kg)
Bottom plate (1) (see P7) Bottom cover screws (4) that the plate does not bend seriously to prevent
breakage of the bottom plate. Size (unit: mm)
Caution
- Install the appliance on a flat, stable surface
to avoid excessive vibration and noise.
- Do NOT install the appliance in direct sunlight
or in a place where temperatures reach
※ New hose-sets supplied with the freezing. 。
appliance are to be used and that - Do NOT let metallic portions of the appliance
old hose-setsshould not be reused. come into contact with metal plate of furniture,
sinks or other appliances.
- Be sure to remove all packages (including the
foam cushion and anchor bolts assembly)
before using the machine. Otherwise,
damages may occur.
6 7
Installation Water Inlet & Drain Hoses and Power Cords
How to Remove Anchor Bolts Used for Tightening Drain Hose
Transport Caution
Operating Instructions
Internal parts have been fixed by four anchor 1.Be sure to place the end of the drain hose in such a way that the end is within 1m
Excessive vibrations may occur if the machine from the ground to prevent siphoning.
bolts used for transport. Make sure these spins with the anchor bolts attached. 2.Fix the drain hose using a lifting rope to ensure that the bend has no impact on the
bolts are available during handling or moving. water flow. This prevents displacement of the drain hose.
Remove them before setting using a spanner 3.Do not insert the drain hose into the washing machine if it is too long to prevent
(not included in the list of accessories). abnormal operation.
Caution
· Do not remove the fastening clip of the
drain hose.
· Improper horizontal adjustment may result
in high noise from the washing machine,
Installation
Water Inlet & Drain Hoses and Power Cords
excessive vibrations and obvious
displacement of the machine.
Anchor bolt
max 100 cm
must be provided to the customers. ·Foreign matters or a child's fingers may
min 60 cm
enter the machine, if the cover cap is
You need to install in the reversed procedure not properly installed. Fastening clip
if you need to handle the washing machine · Please contact the designated service
once again. center if you find it hard to pull out the
rubber due to deformation.
Operating Instructions
Caution Check if water leaks and abnormal noises
1 click
Connect the inlet hose to the joint. If you hear a
sound when pulling down the part of the Never distort, draw or bend the drain hose.
occur, and if drainage functions properly
after the installation.
water inlet hose, it indicates that the hose has
been automatically connected. Be sure to insert the drain hose into the drain Carry out the following operations when no
(Pull down the water inlet hose to make sure the hose duct. The height of the drain hose shall laundries are available in the drum.
not exceed 1m.
hose will not be pulled out). 4 1.Turn on the water tap.
2.Close the door.
3.Press 【 Power 】 button to power on
2 the machine. Select 【 Tub clean 】
program, and press 【 Start /Pause 】
10 11
Preparations before Washing Preparations before Washing
Initial Use Delicates/Synthetic/Intensive Programs Hanging the laundry
Before initial washing, make sure the “tub clean” function is executed when no laundries are present
Operating Instructions
The drum spins gently in the [Delicates/ - Hang out white or light-coloured wool and
in the washing machine. Turn on the water tap, power on, and press “tub clean”. (Notes: better cleanup
Synthetic/Intensive] program. nylon items away from direct heat or
effects can be obtained if a proper amount of bleach is used). sunlight.
Classification of Laundry - After washing, lay out wool and nylon
● Read clothing care labels to sort the laundry into different loads. clothes, and return them to their normal
● Sort the laundry by colour, type of fabric and how soiled it is. Doing so will help you choose the Laundry load: shape before hanging in the shade. This
correct programme and temperature for each wash. will help to reduce the ironing time.
- For [Delicates] program: 2.0kg or less. - Hang wool items with creases smoothed
Laundry Preparation out, or spread them out to dry.
- For [Intensive] program: 2.0kg or less
■Pre-washing treatment of local stain positions
●Collar and gusset ●Stain ●Sludge, solid stains
Apply special stain remover at the Apply detergent or oxygen-rich series (Curry, chilli sauce)
■Laundry to be placed in a laundry net (to be washed with other clothes) - Use hangers for shirts, blouses and
●Bras with metal wires, and tights - Chemical fiber jacket: 200g trousers.Wrap a towel around the hanger
Put them into a laundry net to prevent them (Qty: 1) to approximate the clothing’s shoulder
or the appliance from being damaged. width so that it will retain its shape as it
Laundry net (Note: the net must dries 。
●Lace clothing and small items: be purchased separately) )
■Checking laundry Tie up any loose strings on the apron and
●cloth and remove sharp objects, ●pillowcases etc. If zippers or sharp ●Clothes that are not colour fast - Pants: 400g
should be washed separately
(to 。 (Qty: 1)
for example, the hairpins and ornaments are provided on the clothing,
close the zippers. Turn clothing with prevent dyeing).
screws, which may
damage the cloth. raised fabrics and zippers inside out. ●Red or dark blue
Otherwise,the clothes
clothes.
may be damaged.
● Jeans etc.
If clothing shrinks in the wash
●REMOVE any hair, animal fur, ●For clothes prone to fluff, be sure ●Prevent static electricity Tips for washing delicates:
sand and other materials with a to turn them toward the outside Spread the item out to its original size on an
brush before from the inside. ironing board. Use dress pins to hold the size
washing. ABC Fold the laundry so that its shape enables it to be and shape. Then, use an iron to steam it and
Static electricity may be generated,
depending on the type of clothes. easily put into the drum. Put it into the drum whiling leave it to dry.
Please use softener during washing. making sure it is flat.
Change the direction of each laundry if there are
■Rough amount of detergent (for each piece of clothes) ※ The following weights are for reference only. many laundries to ensure even overall thickness.
※ Vibrations occur if the number of laundry exceeds a
proper value. In this case, observe the specifications
on the rated capacity.
Detergent
Shirt Female shirt Socks Briefs Bedsheet
(blending, about 200 g) (blending, about 200 g) (blending, about 50 g) (100% cotton, about 50 g) (100% cotton, about 500 g) - Use a mild liquid detergent for delicates items.
Other detergents may damage the laundry.
- “Rinse” function may be required in the
[Delicates/Synthetic/Intensive] program to
remove residual detergent from the laundry.
12 13
Preparations before Washing Descriptions of Operating Buttons
Bedding programme
Make sure that the label of each item to Putting bedding into the drum
Operating Instructions
be washedshows either the wash ( ) 1. Fold down blanket or bedspread into a quarter of
their original size.
or hand - wash symbol ( ).
- Wash only one blanket at a time.
1
2
Washables:
---100 % synthetic fibre lab nkets – up to 3
kg.
--- 100 % synthetic fibre futonsand100% 2. Put the blanket or bedspread into the drum.
cotton blankets – up to 1.5 kg (single Fold it while putting it into the drum (fold into 1/6
bed size) of the original size).
8 7 6 5 4 3
14 15
Descriptions of Operating Buttons Detergent - Softener (How to Add)
Pull out the detergent drawer and add detergent Amount of detergent
Please follow recommended amount of
or softener to the correct compartment. Check the detergent described in packageThe amount
packages for the recommended amounts (the
Operating Instructions
of detergent you should use
amount depend on the number of laundries and depends on the following factors:
the extent of stains). - How soiled the laundry is
Caution - Amount of the laundry
- Water hardness
Do NOT use the appliance when the detergent The amount of foam varies according to the
container is removed. This may result in a amount and type of detergent, how soiled the
water leak. laundry is, and the hardness and temperature
of the water.
Softener compartment Prewashing compartment Softener compartment
The following additives may be added to this
compartment:
- Fabric softener
【Extra Rinse】indicator lamp is on.Adding a rinse process helps to achievae be added to this compartment:
better rinse effect. - Detergent
- Tub cleaning detergent or bleach
Prewash The detergent will enter the drum ONLY
Please note the position of the blue cover to
Press 【Options】 button and select 【Prewash】 program, so that 【Prewash】 when water flows through the detergent box.
avoid negatively affecting the auto filling of the
Therefore, if you have forgotten to add
indicator lamp is on.You can pre-wash dirty clothes using this function. detergent, please power off the machine and softener.
restart, and then select “single drain” function The filled softener should not exceed the
Easy Iron to drain off water from the washing machine. maximum marked amount.
Press 【Options】 button and select 【Easy Iron】 program, so that After that, add detergent and restart the program. ※ Certain brands of softeners may stick to the
※ "single drain" compartment (becoming residues) when water
【Easy Iron】indicator lamp is on.This function reduces the extent of fold is used to flush them. In this case, flush using
select Program selection knob "spin" and press
after washing. To perform free-ironing treatment, the clothes are shaken for Spin speed button "no spin". clean water.
If flushing cannot be done, you can take down
12 hours before final spinning. If you need to terminate the easy iron function in Detergent the detergent box from the machine and perform
advance, press 【Start/Pause】 button to display this step. Then, run the next 1.Liquid detergent flushing (see P22 for details).
step, which is the spinning step. Caution Prewashing compartment
Prewashing detergent
Eco. Whenever you use the Prewash of Cotton,
Do not use liquid detergent as the main
Press 【Options】 button and select 【Eco.】 program, so that 【Eco.】 detergent for programs with pre-washing. Intensive, Synthetic, Down Jacket, Bedding and
Mixed programme, always put detergent in this
indicator lamp is on. This function reduces the energy consumption during compartment.
washing. It is recommended that a mild liquid detergent
be used for cotton program. - Caution
2.Powdered detergent The amount of foam depends on the amount
Caution It is advisable to use low-foam soap powder. and types of detergent used, how soiled the
The above functions are single-choices. The following ways help prevent powdered - laundry is, and the temperature.
Overflow of foam and water may occur if the
Only a part of them are valid. detergent from being left in the detergent box: door is opened during operation. In this case,
- Wipe inside the detergent compartment - receive the foam and water using a towel.
Do NOT use excessive powdered detergent to
to make it dry. prevent excessive foams. Otherwise, a de-
- Make sure no blocks of powder are foaming program is included automatically,
added to the compartment. Detergent which prolongs the washing time.
blocks may cause obstruction after a ※"single drain"
prolonged period. select Program selection knob "spin" and
16 press Spin speed button "no spin". 17
Program list Program list
Capacity (kg) Applicable clothing types
Automatic configuration Additional choice
Program
Operation Methods
and conditions Time required Maximum temperature
Maximum dehydration Pre-washing
7.0 8.0 rotating speed detergent Detergent Softener
Program list
clothing that can be washed by hands or a washer.
Spin 7.0 8.0 Dehydrate the washed clothing 0:11 - 1200 r/min
Rinse&Spin 7.0 8.0 Clothing only for rinsing and spinning 0:17 - 1200 r/min
Rapid wash 3.5 4.0 Ultra-fast washing for clothing with less stain 0:15 40 ℃ 800 r/min
Down Jacket 2.0 2.0 Washing down jackets 1:06 40℃ 1200 r/min
Bedding 3.5 4.0 Washing large items 1:41 90℃ 1200 r/min
Mixed 7.0 8.0 Washing ordinary items 1:12 90℃ 1200 r/min
Operation Methods
- The door and buttons must be locked to
Select the duration from the current time to the
prevent a child from entering the drum.
end time.
- Setting and release of child lock:
- Time saver is not available for the following
- Setting:After starting the course , hold down
functions:【 T u lbean】. C
【 Water Temp 】 + 【 Spin Speed 】
- The actual operation duration may differ from the
at the time for 3 seconds to set this function.
preserved duration, depending on the type of
to set this function. The indicator lamp is on
laundry, temperature conditions and water inlet/
after setting, until the operation is finished.
drain conditions.
- Release:After starting the course , hold
down 【 Water Temp 】 + 【 Spin Speed 】
at the time for 3 seconds to set this function.
1.Open the door and put the laundries into the ※ The above figure is based on Caution to set this function. The function will be
canceled.
Operation Methods
Optional Functions
drum. cotton program. - Do Not use detergent that is hard to
dissolve during saver function, as blocks The following example describes how to use the
For details on preparation and laundries, see
may be formed before washing in this case. child lock:
P12, P18-19.
6.Press 【 Start /Pause 】 button. As a result, the detergent may fail to flow out. - Put the laundries into the drum, select the
2.Close the door, and turn on the water tap. program and run the machine. Set “child lock”.
To set timed operation, do the following:
Caution 1.Press 【 Power 】 button to power on the
"Child Lock" indicator lamp lights up and
- Make sure that no laundries are caught by The child lock is in a "locked" status during
indicates the remaining machine.
the door. 2.Select the required program and optional functions. operation of the machine.
- Do not put too many laundries in the drum. time before water entry. 3.Set the preset time.
- This may cause excessive vibrations or Continuously press 【Preset】 button until the
damage to the washing machine. required time is displayed.
4.Press 【Start/Pause】button to complete The lock is released after the operation.
3.Insert the power plug and turn on 【 Power 】
Button. saver setting.
The buzzer sounds, and the operation
4.Select the program knob to set the desired
washing program. is finished.
Be sure to re-set in steps as described above after
Caution power-off.
■ The time required for washing is displayed on
the panel. - Be sure to apply “additional rinse” function
5.Select additional functions and other settings if detergent on the laundries are not
completely removed using the basic Cancelling preset time
In standby status, the selected functional items washing programs.
blink, and indicators for other optional function - The laundries should not be left in the drum Press 【 Power 】 button to cancel all settings.
items are on. If other items are optional when a for a long time to prevent color fading,
function is in “pause” status, the indicators for deformation and folding.
- If the program is running, and you turn the
the current items blink. If other functions are not
knob to make it depart from the position of
Viewing preset time setting
optional when a function is in “pause” status, the the current program, the buzzer will sound,
indicators for the current items are on. The remaining time is displayed when preset time set.
indicating invalid operation. In this case,
however, the set functions and the remaining
Soak: (see P16 for details).
time set remain unchanged. The program
Extra Rinse: An additional rinse cycle enables cannot be paused if you press 【 Start/
Prewash: (see P16 for details). Pause 】 . In this case, the buzzer will
Easy Iron: (see P16 for details). sounds, indicating invalid operation, and
Eco.: (see P16 for details). “EP” blinks at the “remaining time” window.
The program cannot be paused unless you
turn the knob to the correct position of the
For details on optional functions and program. Or, you can press 【 Power 】
settings for each program, see P18-19. to re-select to start the program.
20 21
Maintenance and Care Maintenance and Care
Machine Body 2.Remove the detergent container by
Softener cover
22 23
Maintenance and Care Fault Checklist
Filter Mesh of Water lnlet Valve Preventing frozen water inlet & drain hoses Problem Cause
Body
steps described below before removing on the power again.
for 24 hours before using. This will ensure that the water
the water inlet hose. ●Door lock may be activated.
inlet/drain hoses and internal connection hoses do not
1.Turn off the water tap. become clogged up with ice. Door does open. ●Child lock may be activated. (See page 21.)
If your water supply hose freezes, perform the following ●The water temperature or level may be too high
2.Switch on the appliance. procedures:
1.Wrap warm towels around the joints of the water inlet Unusual odour ● Rubber parts may give off a smell when you start using the
3.Select the [Cotton] program and then appliance, but the smell will go away over time.
hose.
Wash
otherwise water may not be stored, but may be drained out
6.Clean the filter mesh, which is located 2.Add 2 to 3 liters of warm water to the drum. Water is going into the immediately.
on the rear of the washing machine. appliance, but cannot ● If you have paused the washing and then restart it, the
To do this, use a small brush, for example, be stored. appliance may drain out some water.
a toothbrush. ● After the retaining screw of drain hose is removed, the drain
hose is dropped down.
( About 50 ℃ )
7.Re-connect the water inlet hose. Turn on Water goes into the ● If the water level is dropped, water is automatically supplied.
the water tap and check for leaks. appliance during the ● For heavy loads, the water may fill up repeatedly.
wash process
3.Run the [Spin] program after a dozen of minutes. Drainage during the ● After the safe water level for overflow is reached, forced
wash process drainage will occur during the wash process.
Rinse
appliance during the ● If water exist in the drum, starts from draining.
rinse process
● The display time is corrected randomly. Therefore, time pause
may occur. The displayed time is the standard time and is
Time The remaining time is different from the actual needed time.
changed ● If the load is not balanced during the rinse process, operating
times will be added, and the rinse time will be extended
accordingly.
24 25
Fault Checklist Abnormal Display
If required
● The drain hose is clogged. disappear when you press
There is only a few ● The amount of foam varies, depending on the temperature, [Start/Pause]. The program
level and softness of the water. ● The drain hose is immersed in continues running from the
foams · Low amount of detergent; · Type of detergent (low-foam
· Serious stains;
· Excessive amount of laundry.
detergent etc) U 11 water.
● The drain hose is more than 1m
time before alarming. Or, you
can press the [Power] switch
to re-select a time for starting
Detergent and Foams
Abnormal Display
Fault Checklist
If U14 is still displayed after
● Do not directly put powdered detergent into the drum. →Be troubleshooting, it will disappear
No foams sure to put it into a detergent container. ●The water tap is turned on. when you press [Start/Pause]. The
● The amount of foam varies, depending on the temperature, level program continues running from the
and softness of the water.
U 14 ●The water tap and inlet hose
have been frozen.
●Water is cut off.
ime before alarming. Or, you can
press the [Power] switch to re-select
a time for starting program. Please
● The softener may have exceeded the MAX level of the Unable to supply water contact the service center recognized
Fabric softener detergent container (P.17). ●Stains are present on the inlet by Panasonic after removing the
power plug if the faults persist after
overflows. ● You may have spilt the liquid when closing the detergent filter mesh (see P24). troubleshooting as described above.
container too strongly.
You have to disconnect the water supply hose and drain away
disrupted. the impure water through the tap. Make sure that the water
supply hose has been reconnected before using the appliance
The display is not ● The appliance may be in a brightly lit or sunlit area. This
clear situation is not a failure
26 27