Professional Documents
Culture Documents
S
p
e
a
k
e
r
B
u
i
l
Table of Contents d
Plate Amplifiers 148
i
Speaker Kits 150
Cabinets & Cabinet Covering 152
n
g
Dampening Materials 154
http://slidepdf.com/reader/full/speacher-buildingpdf 1/62
7/23/2019 Speacher building.pdf
Speaker Building
Plate Amplifiers
for a clean
main transition to
speakers • Reversible phase
best integration switch
with for
satellites
Small but mighty! This • Variable frequency 4th order
high performance amplier low-pass crossover for a
clean transition to main
module packs big-amp
speakers
features into a compact
chassis. Great for when A plethora of features and
you need a healthy amount robust design allow the SA240
of power for a subwoofer to outperform any other sub
that is small in size. It is amp that you will nd at the
also perfect for r eplacing same price point. The compact
a stock amp in a store- chassis with extensive heatsinking efciently draws heat out of the amp, allowing
bought subwoofer that is it to play with lower distortion and greater stability than other similar amps. Add to
damaged or blown. The this a 4th order low-pass lter, soft-clip circuit, and full protection schemes - this
solid construction of this amp gives it the reliability, stability, and outstanding amp has everything you will need.
sound quality that you need. Specifications: Measured power output: 170 watts RMS into 8 ohms @ 0.1%
Specifications: Measured power output: 75 watts RMS into 8 ohms @ 0.1% THD, 240 watts RMS into 4 ohms @ 0.2% THD. Signal to noise ratio: 90 dB
(A-weighted). Dimensions: 9-13/16" W x 9-13/16" H x 5" D. Enclosure cutout:
THD, 100 watts RMS into 4 ohms @ 0.2% THD. Signal to noise ratio: 90 dB
(A-weighted). Dimensions: 7-1/2" W x 8-11/16" H x 4-3/4" D. Enclosure cutout: 8-1/2" x 8-1/2".
6-1/2" W x 7-3/4" H.
#300- 804 (No bass boost) . . . . . . . . $169.99 LIST $129.88 (1-3) $125.77 (4-UP)
#300- 802 . . . . . . . . . . . . . . . . . . . . $129.99 LIST $99.88 (1-3) $94.34 (4-UP) #300- 805 (6 dB bass boost @ 30 Hz) . $169.99 LIST $129.88 (1-3) $125.77 (4-UP)
148
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 2/62
7/23/2019 Speacher building.pdf
Speaker Building
Plate Amplifiers
#300- 784 . . . . . . . . . . . . . . . . . . . . .$79.99 LIST $59.88 (1-3) $52.59 (4-UP) #300- 782 . . . . . . . . . . . . . . . . . . . . .$59.99 LIST $39.88 (1-3) $37.48 (4-UP)
signal to noise
ampliers someratios.
of theThe
bestcombination of clean output
sounding subwoofer and on
ampliers high
thepower makes the BASH
market.
Common Features: 50 to 150 Hz low-pass crossover, 0º or 180º phase, line level inputs,
speaker level inputs, master on/off switch, auto on.
300 Watt Specifications: LFE input, 300 watts RMS @ .5% THD into 4 ohm load, Signal to
noise ratio 105 dB A-weighted, Dimensions: 11" W x 7" H x 3-1/2" D.
500 Watt Specifications: Line outputs, 500 watts RMS @ .5% THD into 4 ohm load, Signal
to noise ratio 105 dB A-weighted, Dimensions: 12" W x 8" H x 3-1/2" D.
#300- 750 (300 Watt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $299.99 LIST $149.87 EACH $139.46 (2-UP)
#300- 752 (500 Watt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $399.99 LIST $228.58 EACH $199.66 (2-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
149 3/62
7/23/2019 Speacher building.pdf
Speaker Building
Speaker Kits
of
youwell
areover 10 times
getting a $20the cost and
woofer of the parts?
a $20 If you are
amplier. lucky,
With the
subwoofer kits, you know exactly what you are getting – nothing but the best in cabinets, drivers,
and ampliers. These kits can be easily assembled in approximately 1 hour with a few basic
tools; all cutouts are pre-made and hardware is included. Simply insert the cabinet damping
materials, attach the spiked feet, and secure the driver and amp. For those who want a sub that
s ready-to-go out of the box, choose the fully assembled option for a factory built unit.
Subwoofer System
• Dayton Reference Series
legendary ultra-low-
distortion subwoofer
• Adjustable volume,
The Titanic MKIII Series crossover frequency,
bandwidth and more
Sub Systems feature one
of our legendary Titanic • Clean, detailed bass down
to 25 Hz
subwoofer drivers, USA- Dayton Reference Series
built behemoths that are loudspeakers have gained
known for their excellent an enormous following and
build and awesome low frequency performance. These drivers are respect among speaker
precisely matched with high-power amplifiers that extract the builders and audiophiles;
most performance from the woofers and provide the best sound after listening to an assembled
RS1200 kit it’s easy to see and hear why! This kit is built around the widely
quality and highest output levels. Everything is housed in a 3/4" popular and powerful 12" RSS315HF-4 subwoofer. Combined with the 12"
MDF enclosure featuring internal brace, satin textured enamel sub is the Dayton HPSA500 500W subwoofer amplier, one of the most
finish, and 1" MDF grill. The result of all of these components is technologically advanced subwoofer ampliers in the industry. The HPSA500
a system that is unobtrusive in appearance, but that offers truly amplier’s 500 watts will provide the horsepower you need for optimum
"titanic" bass performance. performance in any room environment. This kit is a plug-and-play system as it
contains all hardware and requires about an hour’s time. The enclosure is pre-
10" T1003 Subwoofer System drilled and cut for the amplier and driver, has a textured matte black enamel
The 10" Titanic MKIII System is the latest evolution of a design that has for a durable
in the USA long lasting nish. Spikes included. Designed and engineered
been receiving rave reviews for over 5 years. With it’s 10" Titanic MKIII
driver, you get quick, accurate bass t hat is exceptional for music systems Specifications: • 12" high excursion subwoofer • 500 watt amplier • Frequency
and is also great for small t o medium size home theater systems. Expect range: 25–180 Hz • Adjustable 40–180 Hz low-pass lter • Line-level and speaker-
useful bass output down to 30 Hz, and output levels up to 105 dB. Features level inputs • Auto-on • Dimensions: 17" H x 17" W x 17-1/4" D.
high and low level inputs, built-in variable crossover, auto on/off, and 240 #300- 742 (Kit) . . . . . . . . . . . . . . . . . . . . . . . . . . $849.99 LIST $498.30 EACH
watts of music power. • Exterior dimensions: 14" W x 14" H x 14-1/4" D.
#300- 743 (Fully assembled) . . . . . . . . . . . . . . . . . $949.99 LIST $649.80 EACH
#300 -76 0 (Kit) . . . . . . . . . . . . . . . . . . . . . . . . $469.99 LIST $358.80 EACH
#300 -76 1 (Fully assembled) . . . . . . . . . . . . . . $699.99 LIST $499.80 EACH
C1500 15" Subwoofer Kit
12" T1203 Subwoofer System • Custom matched cabinet,
amp, and driver for maximum
The 12" Titanic MKIII System is well respected for its combination of power performance
and musicality, and offers excellent all-around performance for serious home
• Awesome theater level, chest
theaters or music listening rooms. The modest enclosure size will t into most pounding bass down to 25 Hz
rooms, The
action. whilepowerful
still allowing deep
500 watt andand
amp powerful bass thatdriver
long excursion will capture anysystem
allow this movie to • Fast and easy assembly — go
from unpacking to
achieve in-room SPLs of 110 dB, with output down to 25 Hz. Amplier features playing in no time!
stereo line-level as well as LFE input, variable low-pass crossover, full parametric
When it comes to bass
EQ, and auto on/off. • Exterior dimensions: 17" W x 17" H x 17-1/4" D.
output, it’s all about
#300- 762 (Kit). . . . . . . . . . . . . . . . . . . . . . . . $899.99 LIST $536.70 EACH moving air-- and there’s no
better way to do that than
#300- 763 (Fully assembled) . . . . . . . . . . . . . . $999.99 LIST $686.70 EACH
with a 15" driver! Dayton
Loudspeaker's new 15" subwoofer kit is
15" T1503 Subwoofer System designed to take full advantage of that philosophy by providing earth-shaking
The 15" Titanic MKIII System is the subwoofer system of choice for home bass in an easy-to-assemble kit. With its powerful 240 watt amp, high-excursion
theater buffs that want to embarrass the bass of their local movie theater. 15" driver, and rigid cabinet, we guarantee you will not be able to nd a better
The imposing 15" Titanic MKIII driver and a 1,000-watt amplier enable this quality, higher performance subwoofer anywhere else at this price. The attractive
system to move enough air to FEEL explosions. You will not be able to nd black ash nished MDF cabinet comes with grill and all hardware pre-installed,
a subwoofer with deeper or more power the bass than this for less than so all you have to do is secure the driver and amp and you are ready to rumble. If
$1,000.00, period. Amplier features stereo line-level as well as LFE input, you’ve never built a kit before, this is your chance to see how Dayton Audio makes
variable low-pass crossover, full parametric EQ, and auto on/off. • Exterior it easy to save money and achieve exceptional results.
dimensions: 19-1/8" W x 19-1/8" H x 19-3/8" D. Specifications: • 15" long-throw subwoofer driver • 240 watt amplier
#300- 764 (Kit) . . . . . . . . . . . . . . . . . . . . . . $ 1 , 1 9 9 . 9 9 LIST $688.30 EACH • Frequency range: 25–180 Hz • Adjustable 40-180 Hz low-pass lter • Line-
level and speaker-level inputs • Auto-on •Dimensions: 18-3/4" H x 18" W x 19" D.
#300- 765 (Fully assembled) . . . . . . . . . . . . . $ 1 , 2 9 9 . 9 9 LIST $838.30 EACH
#300- 770 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $399.99 LIST $294.50 EACH
150
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 4/62
7/23/2019 Speacher building.pdf
Speaker Kits Speaker Building
For those of you who want truly high-end sound quality and excellent
Speaker Kits
aesthetics, look no further than these speaker kits. Built around the
now-famous Dayton finished speaker cabinets, the look of these systems
Usher 701 Kit
will rival that of salon speakers. Available in five different designs, three
beautiful finishes, and two cabinet styles, including the new elegant World renown authority in audio and acoustics
Joe D’Appolito has created these new speaker
curved cabinets, which complement any décor. Putting together one
kits using the Usher 9930 tweeter and Usher
of these kits can usually be accomplished in several hours. Best of all, 8945A woofer. The Usher 701’s is a classic two-
you’ll realize substantial savings compared to what you would pay for way bookshelf system that possesses
equivalent speakers at an audio store, plus get the satisfaction of telling accuracy, detail and a transparency
your friends, "I built it myself!" that must be heard to be believed!
With the Usher 701 kit, Joe D’Appolito
has designed a system that is smooth
Dayton A532 Speaker Kit and non-fatiguing with “studio
Based on the Dayton DA135-8 5-1/4" Aluminum cone monitor” type accuracy.
woofer and the famous Dayton DC28F-8 silk dome Specifications: • Impedance: 4 ohms
tweeter this system combines the outstanding bass • Frequency response: 41-20,000
and midbass characteristics of a n aluminum Hz • SPL: 86.5 dB 2.83V/1m • Power handling: 80 watts RMS • Traditional
cone with the smooth high frequencies of a dimensions: 17" H x 10" W x 12.5" D • Curved dimensions: 17" H x (10" front,
silk dome.The resulting sound is very crisp 4.5" back) W x 14" D • Sold individually.
and lively, making for a very engaging and
exciting speaker. #302- 950 (Gloss Black) #302-952 (Cherry) #302-956 (Maple)
Specifications: • Impedance: 4 ohms Traditional Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . $349.99 LIST $279.00 EACH
• Frequency response: 45-20,000 Hz • SPL:
87.5 dB 2.83V/1m • Power handling: 100 #302- 951 (Gloss Black) #302-953 (Cherry) #302-957 (Maple)
watts RMS • Traditional dimensions: 20" H x Curved Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . $389.99 LIST $299.00 EACH
8" W x 13" D • Curved dimensions: 20" x (8" front, 4.5" back) x 13.5" D • Sold
individually.
#30 2-9 90 (Gloss Black) #30 2-9 92 (Cherry) #302-996 (Maple) Dayton RS621 Speaker Kit Pair
Traditional Cabinet . . . . . . . . . . . . . . . . . . . . . . . $229.99 LIST $169.00 EACH Based on the DIY Project Showcase "The Encore" speaker pair, these small in
stature speakers are BIG on sound.
#30 2-9 91 (Gloss Black) #30 2-9 93 (Cherry) #302- 997 (Maple) In any sound application you can be
Curved Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . $269.99 LIST $199.00 EACH assured that the Dayton Reference
Series RS150S-8 6" woofer will
Dayton A732 Speaker Kit provide you with tight
This fully-aluminum system delivers the great lower midbass. The
resolution and low-distortion that aluminum drivers Dayton Reference Series
are famous for. The Dayton DA175-8 7" Aluminum RS150S-4 1-1/8" shielded
driver delivers powerful bass performance and aluminum dome tweeter is
truly remarkable midbass accuracy. The Vifa matched sonically to the
D25AG35-06 tweeter is famous for being one of the woofer and will be sweet
best aluminum tweeters available, and it has been to your ear. It’s affordable,
used in countless high-end speakers over and the results are simply stupendous!
the years. The overall frequency response Specifications: • Impedance: 8 ohms • Frequency response: 60-20,000
is quite at, but is not fatiguing or harsh. Hz • SPL: 88 dB 2.83V/1m • Power Handling: 65 watts RMS • Traditional
The output levels and bass capabilities dimensions: 12" H x 7.5" W x 10" D • Curved dimensions: 12" H x (7.5" front,
Specifications: • Impedance: 4 ohms 4.5" back) W x 10.5" D • Sold in pairs.
• Frequency response: 40-35,000 Hz
#302- 960 (Gloss Black) #302- 962 (Cherry) #302- 966 (Maple)
• SPL: 86.5 dB 2.83V/1m • Power
handling: 150 watts RMS • Traditional Traditional Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . $349.99 LIST $279.00 PAIR
dimensions: 22" H x 9" W x 13.5" D
• Curved dimensions: 22" x (9" front, 4.5" back) x 14.4" D • Sold individually. #302- 961 (Gloss Black) #302-963 (Cherry) #302-967 (Maple)
#30 2-9 80 (Gloss Black) #302 -98 2 (Cherry) #302- 986 (Maple) Curved Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . .$389.99 LIST $299.00 PAIR
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
151 5/62
7/23/2019 Speacher building.pdf
Speaker Building
Cabinets & Cabinet Covering
Blank Replacement Baffles (New Magnetic Type) Replacement Grills (New Magnetic Type)
Price Price
Part # Model # Description Pair Part # Model # Description Pair
302-709 MB25 Blank baffle for .25 ft3. cabinets $8.86 302-708 MG25 Grill for .25 ft3 Cabinets $9.17
302-719 MB38 Blank baffle for .38 ft3 cabinets 10.66 302-718 MG38 Grill for .38 ft3 Cabinets 9.97
302-729 MB50 Blank baffle for .50 ft3 cabinets 10.66 302-728 MG50 Grill for .50 ft3 Cabinets 10.74
302-739 MB75 Blank baffle for .75 ft3 cabinets 14.68 302-738 MG75 Grill for .75 ft3 Cabinets 13.94
302-749 MB75MTM Blank baffle for .75 ft 3 MTM cabinets 14.68 302-748 MG75MTM Grill for .75 ft3 MTM Cabinets 12.69
302-759 MB10MTM Blank baffle for 1.0 ft 3 MTM cabinets 16.25 302-758 MG10MTM Grill for 1.0 ft3 MTM Cabinets 15.14
Finished Subwoofer Cabinets Without cutouts (you will need to cut your own holes per your design):
Dayton Loudspeaker has just
Net Volume External Dimensions Price
made it easier for you to build Part # Model # Cu. Ft. (H x W x D) Each
that awesome subwoofer you’ve
302-800 SWC-1 1.0 14" x 14" x 14-1/4" $119.88
always wanted! Perfect for the
302-810 SWC-2 2.0 17" x 17" x 17-1/4" 155.80
builder who does not have the 302-820 SWC-3 3.0 19-1/8" x 19-1/8" x 19-3/8" 186.77
time, equipment or patience to
build his or her own subwoofer
system from scratch. The cabinets
With cutouts (for designated woofer and sub amp):
utilize 3/4" MDF (the speaker Price
cabinet material of choice), are Part # Model # Description Each
precision CNC cut, and then 302-802 SWC-1CO SWC-1 cutout for 10" woofer and SA240 amp $119.88
assembled 302-812 SWC-2CO SWC-2 cutout for 12" woofer and HPSA500/1000 amp 155.80
for superior with polyurethane
strength. glue joints and internal brace are important for
Strong edge 302-822 SWC-3CO SWC-3 cutout for 15" woofer and HPSA500/1000 amp 186.77
achieving strength and minimal panel resonance. The enclosure is meticulously
sanded and primed, then painted with three coats of t extured matte black enamel to create a durable long lasting nish. All edges have a 1/4" roundover and a 1"
grill wrapped in black cloth to nish off the aesthetically pleasing design. Available with or without cutouts for amplier and woofer.
152
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 6/62
7/23/2019 Speacher building.pdf
Speaker Building
Dayton Loudspeaker In-Wall
Mounting Systems Cabinets & Cabinet Covering
• Create your own custom in-wall speakers
• Utilizes the exclusive B-REX replaceable bafe system Wood-Look Vinyl Laminate
• Protects and beauties your project
• No mess, fumes, or harmful solvents needed
• Alleviates frustrating and time consuming nishing steps
• Available in multiple nishes to match any decor
Tired of boring raw MDF speakers? No matter how good
they sound, if they don’t look good no one will
appreciate them but you. Applying this
high-quality vinyl wrap is a cost and
time-effective way to achieve professional-
looking results. Available in 7 different
colors and nishes, with a peel-and-stick
pressure sensitive adhesive on the back. No expensive tools are necessary for
application–scissors, a razor knife, and a straight edge are all that is needed. Sold
in rolls containing 2 ft. by 18 ft. of material. 10 mil thick.
Dayton Loudspeaker® takes speaker building to the wall with in-wall
mounting systems. Now you can choose the drivers and crossovers to
create professional looking in-wall speakers. Got a great speaker design?
Create center channel and surrounds to match your stereo speakers for a
complete custom home theater system.
Three-piece design makes installation in new or existing walls a snap.
Frames are made of ABS plastic with a metal brace; the bafe is 1/2" MDF with List Price Price
Part # Color Price (1-3) (4-UP)
a black satin nish; grills are made of ne mesh steel with painted nish.
System comes complete with frame, blank bafe, grill, mounting template, 261-610 Black Ash $27.99 $19.85 $18.90
and hardware. Sold individually. 261-612 Beech 27.99 19.85 18.90
261-614 Cherry 27.99 19.85 18.90
This mounting system also allows the versatility offered by the Bafe 261-616 Teak 27.99 19.85 18.90
Replacement and EXchange (B-REX) system, which allows the front bafe to 261-618 Textured Black 27.99 19.85 18.90
be easily removed for prototyping and construction. This innitely re-installable 261-620 Red Maple 27.99 19.85 18.90
approach works great particularly for making initial driver cutouts. Blank 261-622 Textured Silver 27.99 19.85 18.90
bafes are available separately, allowing further possibilities. As you can
see, the versatility offered by the B-REX system is unmatched in the industry!
302-490 IB-711 7-1/4" x 11" $9.99 $7.60 260-762 Black $4.90 $4.75 $4.15
302-492 IB-812 8-1/2" x 12-1/2" 12.99 9.92 260-764 Dark Charcoal 4.90 4.75 4.15
302-494 IB-714 7-1/4" x 14" 12.99 10.20
Cabinet Carpet
UMC 2000 In-Wall Mounting Clamp Pair This high quality carpet conforms easily to
• Do-It-Yourself custom in-wall speakers sharp corners because it has no stiff backing.
• Unique clamp attaches speaker bafe You can also st retch it t o cover irr egular
to drywall shapes. This is the covering of choice for car,
• Designed to provide the ultimate in design stage, and amplier cabinets. Carpet is strong,
exibility and strength yet easy to cut with knife or scissors. Adhere
Introducing the revolutionary UMC 2000 in-wall with spray adhesive or latex contact cements.
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
153 7/62
7/23/2019 Speacher building.pdf
Speaker Building Sonic Barrier™ Dampening Materials
The Sonic Barrier™ line of
Cabinet Covering/Dampening Materials acoustic dampening foams are
designed to offer outstanding
sound absorption and cabinet
Band-It Iron-On Melamine dampening for any loudspeaker
• Pre-nished and color-fast project. They utilize only the
• Flexible and durable highest quality foams and
• Heat and stain-resistant barrier materials to yield
• Washable and static-free maximum absorption for any
thickness. Choose from the pure
• Easy to apply
foam dampening materials for
Band-It’s
melamine sound absorption
non-resonant in relatively
structures, or
facings are use the multi-layer materials
an excellent which add a special acoustic barrier and an extra 1/4" of foam, which effectively
choice when decouples the dampening material from the cabinet walls. A very aggressive
you need pressure sensitive adhesive provides easy and permanent installation onto any
a durable, surface. Sold in 18" x 24" Sheets
attractive nish for your loudspeakers. The material is very exible, and
Using Sonic Barrier™ foams in your loudspeaker project will help:
offers a textured nish that is very wear-resistant. An iron-on adhesive allows
• Create an acoustically larger cabinet space, which allows a driver to work in a
it to adhere very well to just about any substrate, including metal and MDF
smaller cabinet
end grain. Simply cut your pieces a bit oversized, iron melamine to secure,
• Tighten and improve bass response
and trim edges with the Band-It edge trimmer or utility knife. Sold in 2 ft. by
• Minimize panel resonances that can introduce additional distortion
8 ft. rolls.
Overall Price Price
Price Price Part # Thickness Composition (1-3) (4-UP)
Part # Color (1-3) (4-UP)
260-520 1/2" 1-layer foam $8.73 $7.93
260-030 Gray $29.89 $28.50 260-525 1" 1-layer foam 11.72 10.78
260-031 Black 29.89 28.50 260-530 3/4" 1/2" foam - 1/2 lb. barrier- 1/4" foam 17.74 16.32
260-033 Walnut 29.89 28.50 260-535 1-1/4" 1" foam - 1 lb. barrier - 1/4" foam 24.28 22.34
260-034 White 29.89 28.50
154
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 8/62
7/23/2019 Speacher building.pdf
Router Buddy™ Kit Speaker Building
• Save money by converting your router into a
multi-purpose tool Cabinet Hardware & Accessories
• Cuts innitely adjustable circles from 2” to
18-1/2” diameter
• No base plate changes required, set-up takes seconds Jasper Circle Jigs
• System is very light and compact
• Included fence allows you to cut dadoes and rabbits for perfect cabinet
assembly If you’re a speaker builder,
• Save time. Use template bushing when making multiple cabinets with the then you need this tool!
same size holes
• Easy to use
Grill Cloth
Open weave grill cloth is
Magnetic Grill Fasteners virtually 100% acoustically
These round magnets are perfect for transparent. Will not
attaching speaker grills to cabinets. The mufe or color sound.
powerful neodymium design will securely 70" wide and sold by
hold even the largest grill frames. To use, the linear yard.
simply drill a 3/8" diameter hole, 3/16"
deep in cabinet and grill frame. Glue
the magnet into place using a suitable Price Price
adhesive or epoxy while observing Part # Color Width (1-9 YDS) (10 YDS-UP)
proper polarity. Magnet dimensions: 3/8" 260-335 Black 70" $6.90 $5.25
diameter x 3/16" thick. 8 magnets per 260-334 White 70" 6.90 5.25
package, enough to attach one grill. 260-337 Dark Gray 70" 6.90 5.25
260-339 Brown 70" 6.90 5.25
#329- 045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.95 LIST $4.88 PKG
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
155 9/62
7/23/2019 Speacher building.pdf
Speaker Building Speaker Mounting Screws
These sharp point, black oxide, Phillips pan head screws
Cabinet Hardware & Accessories with coarse/deep threads are ideal for use with wood and MDF. Perfect for
speaker building and driver mounting. The #6 size is especially suited for
Dayton Loudspeaker Cabinet Cone Spike Set smaller items such as some midranges, tweeters, terminal cups and port tubes.
100 pcs. per package.
Rigidly securing a loudspeaker
enclosure to a oor by means of Pkg. Price Per Pkg.
a “spiking” system dramatically Part # Size Qty. (1-9) (10-UP)
improves clarity, stereo imaging 081-435 #6 x 3/4" 100 $2.90 $2.45
and bass response. This is very 081-440 #6 x 1" 100 3.10 2.68
apparent with subwoofer systems. 081-420 #8 x 1/2" 100 2.00 1.82
These attractive spikes are 081-422 #8 x 3/4" 100 2.25 1.98
precision machined from solid 081-425 #8 x 1" 100 2.35 2.15
brass and then plated with a 081-430 #8 x 1-1/2" 100 2.60 2.18
durable nish. Each cone spike
weighs 86 grams and measures Coarse Thread Cabinet Screws
1-1/4" diameter and 1-1/2" tall.
The two piece threaded tip design Black oxide with “grabber” style course threads. Perfect
allows for precise level adjustment. for speaker cabinet construction in plywood, MDF, and
T-nuts and threaded OSB. Countersink head design.
Price Price
studs are included for Pkg. Price Per Pkg.
Part # Color (1-3) (4-UP)
mounting in cabinets with Part # Size Qty. (1-9) (10-UP)
240-715 Black Chrome $22.88 $21.96
walls up to 1" thick. Set 081-1100 #6 x 1" 100 $1.76 $1.63
240-716 Chrome 22.88 21.96
includes 4 cone spikes, 4 081-1105 #6 x 1-1/2" 100 2.10 1.86
240-717 Black 22.88 21.96
oor discs, 4 T-nuts and 4 081-1108 #6 x 2" 100 1.90 1.75
240-718 Gold 22.88 21.96
threaded studs. 081-1110 #8 x 2-1/2" 100 4.25 3.45
#240- 730 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.90 (1-3) $7.15 (4-UP) 260-840 #6 x 3/4" Wood Screw 1/8" .25 $20.00
260-842
260-844
#8 x 1" Wood Screw
#8-32 x 1-1/4" Machine Screw
5/32"
5/32"
.25
.25 20.00
20.00
260-846 #10-32 x 1-1/2" Machine Screw 5/32" .35 30.00
Hurricane Nuts™
One-of-a-kind blind nut that offers
extremely simple installation and Security
outstanding holding power. The
unique uted design of the Hurricane Nut™ allows it to be inserted simply
Hex Bits
#360- 225 #360- 227
with a hammer or by pulling in with a screw. Unlike conventional T-nuts, the
Hurricane Nut™ goes into wood easily without the pressures that it may take Price Price
to get conventional teeth fully seated. But don’t let the small utes fool you, Part # Size Tip Type Length (1-9) (10-UP)
these nuts can hold at torques that you simply cannot imagine. You have to 360-225 1/8" Security Hex 1" $3.25 $2.95
see the performance for yourself to believe their effectiveness! Once you use a 360-227 5/32" Security Hex 2" 3.75 3.41
Hurricane nut, you will never go back to an ordinary T-nut.
156
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 10/62
7/23/2019 Speacher building.pdf
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
157 11/62
7/23/2019 Speacher building.pdf
http://slidepdf.com/reader/full/speacher-buildingpdf 12/62
7/23/2019 Speacher building.pdf
Speaker Building
Terminals
required to fasten;
drill a 1-7/8" simply
hole, apply Recessed presst terminal by 3-1/8";
2-1/8". cutout:gasket.
Includes 2-7/8" x
glue, and press into place. with gold plated post s
and knurled knobs. Color #260-309. . $3.40 (1-9) $3.20 (10-49) $2.92 (50-UP)
Accepts up to 1 2 gauge wire.
Overall size: 2-3/16" round. coded. Accepts up to 8
gauge wire. Can also be
#260-295. . . . 49¢ (1-9) 42¢ (10-49) 39¢ (50-UP) used with dual banana Subwoofer Input/Output
plugs. Overall size: 3-1/8"
Square Pressfit Terminal round; cutout: 2-7/8". Terminal
Quick release, spring This recessed
#260-307. . $3.25 (1-9) $2.90 (10-49) $2.44 (50-UP)
loaded terminal. Presst terminal panel has
design for easy installation. High Power Speaker inputs for right and
Accepts up to 1 2 gauge Terminal left channels as well
wire. Overall size: 2-3/16" as outputs for right
x 2-3/16"; cutout: 1-7/8" High current binding and left channels
round. Includes gasket. post design. Good for to route to your
applications over 150 watts. satellite speakers. Greatly simplies subwoofer
#260-296. . . . . 59¢ (1-9) 55¢ (10-49) 49¢ (50-UP) Angled for easy acce ss. hook-up. Accepts up to 12 gauge wire. Overall
Accepts up to 10 -12 gauge size: 5-1/2" x 3-7/8"; cutout: 4-5/8" x 3-1/8". Includes
wire. Can also be used with gasket.
Round Speaker Terminal
dual banana plugs. Overall size: 3-1/8" x 3-5/8";
Spring loaded, pushbutton cutout: 2-7/8" x 2-1/8". Includes gasket. #260-308. . $3.95 (1-9) $3.25 (10-49) $2.88 (50-UP)
terminal with polarity
identication. Accepts up #260-303. . $2.95 (1-9) $2.50 (10-49) $2.34 (50-UP)
to 12 gauge wire. Overall Gold Bi-Amp Terminal
size: 2-15/16" round;
Gold Subwoofer Input/
cutout: 1-7/8" round. Recessed mount speaker Output Terminal
Includes gasket. terminal with 2 pair of
Recessed panel
gold plated binding posts.
Perfect for speakers that with 4 pair of gold
#260-294. . . . . 88¢ (1-9) 76¢ (10-49) 58¢ (50-UP) utilize a separate amp plated binding
for woofer and tweeter. posts. Perfect
Square Speaker Terminal Gold plated bridging bars for dual voice
coil subwoofers
Spring loaded, pushbutton included for conventional
terminals. Color coded applications. Also ideal for input and output
dual voice coil subwoofer terminals. Accepts
for polarity identication.
up to 10-12 gauge
Accepts up to 1 2 gauge input and output terminals.
wire. Can also be
wire. Overall size 2-3/16" Accepts up to 10-12 gauge wire. Can also be used
used with dual banana plugs. Overall size: 6-1/4" x
x 2-3/16"; cutout: 2" round. with dual banana plugs. Overall size: 4-13/16" x
3-3/4"; cutout: 3-7/8" x 3". Includes gasket. 5"; cutout: 5-13/16 x 3-3/4". Includes gasket.
Includes gasket.
#260-304. .$4.90 (1-9) $4.50 (10-49) $4.39 (50-UP) #260-313. . $8.50 (1-9) $7.50 (10-49) $6.40 (50-UP)
#260-297. . . . . 95¢ (1-9) 80¢ (10-49) 60¢ (50-UP)
High Power Terminal
Speaker Terminal w/Fuse Holder
Gold Supreme Power
Rectangular spring Recessed-mount terminal
loaded, pushbutton
Terminal
with high current binding
speaker terminal. post type connecto rs. For super
Color coded. Accepts Built-in AGC fuse holder. high current
up to 12 gauge wire. Accepts up to 10 -12 applications,
Overall size: 3-5/8" x gauge wire. Can also be this gold plated
3-1/16"; cutout: 2-5/16" used with dual banana binding post is 9/16" thick! Entry hole will accept
x 1-11/16". Includes plugs. Includes gasket. Overall up to 4 gauge wire. Color coded for polarity
gasket. size: 4-1/8" round; cutout: 3-1/8" round. identication. Dimensions: 4-3/4" x 2".
#260-298. . . .$1.40 (1-9) $1.10 (10-49) 78¢ (50-UP) #260-293. . $3.75 (1-9) $3.25 (10-49) $2.88 (50-UP) #260-314. . $9.50 (1-9) $9.25 (10-49) $8.30 (50-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
159 13/62
7/23/2019 Speacher building.pdf
Speaker Building
Binding Post Plates
Terminals Looking for a higher-performance alternative to
standard terminal cups? The Dayton binding post
Dayton Loudspeaker Heavy plates are the answer. Made from .110" brushed
aluminum, they are available with silver, blue, or black
Duty Binding Posts
anodized nishes. A pre-installed gasket and beveled
• Audiophile quality
outside edge allow easy installation without requiring
• Ideal for high power applications
time-consuming recesses. Simply attach your choice
• Non-oxidizing nish of binding posts to the plate, cut a hole in your cabinet
These heavy-duty binding posts were designed with a jig saw or hole saw, and screw in
with the audiophile in mind. The high-quality plating place. Designed to work with your choice
process
maintain eliminates
the highestthe possibility
possible of corrosion
signal to
transfer and of Dayton Premium Binding Posts.
Specifications: Double plate: Overall
resist harsh environmental conditions. The binding dimensions: 4" W x 5-1/2" H, maximum
posts can be used with banana plugs or will accept cutout: 2-3/4" W x 4-1/2" H, hole spacing:
wire up to 8 gauge. The large diameter knurled head 30 mm x 50 mm. Single plate: Overall
allows for positive nger tight connections. Extra long dimensions: 4" W x 4" H, maximum
rear bolt (1-1/2") for mounting in speaker cabinets with cutout: 3" W x 3" H, hole spacing: 30 mm.
walls up to 1" thick. To install, simply drill a 1/4" hole
and gently tap the binding post in place. The knurled #091 -1245
shaft will keep the post from turning and creates an air- List Price Price
tight t. Available in three nishes: Classic 24 kt. gold, Part # Mfg. # Type Finish Price (1-3) (4-UP)
polished nickel for a chrome look, and satin nickel for 091-600 SBPP-SI Single Silver $12.99 $8.40 $8.00
a platinum look. Overall length is 2-1/4". Sold in color- 091-602 SBPP-BK Single Black 12.99 8.40 8.00
coded pairs with solder tabs. #091 -1246 091-604 SBPP-BL Single Blue 12.99 8.40 8.00
091-610 DBPP-SI Double Silver 14.99 10.78 10.27
Price Price 091-612 DBPP-BK Double Black 14.99 10.78 10.27
Part # Finish (1-9) (10-UP)
091-614 DBPP-BL Double Blue 14.99 10.78 10.27
091-1245 Gold $6.91 $6.58
091-1246 Polished Nickel 6.91 6.58
091-1247 Satin Nickel 6.91 6.58 #091 -1247
Premium Binding Posts
These high-quality 5-way binding posts offer audiophile features at a
Dual-Ended Gold Push Terminal reasonable price. Choose from a fully insulated design or standard design
Pair for 3/4" Cabinets depending on your application and preference. Both models feature a
free-spinning metal ferrule on the tightening knob, which allows a secure
Finally a solution for getting wires in and out of cabinet sub- connection without any tendency to work loose. The cabinet ends are
enclosures! These dual-ended push terminals will eliminate terminated with .250" male-disconnect-style tabs, which allow the use of
the need for messy caulking or having to solder inside a standard female disconnects and also heat quickly for direct soldering. Work
cabinet. Simply drill two 5/32" holes in your 3/4" walls, tighten the two with the Dayton Binding Post Plates or any cabinet panel with a keyed 11.5
halves of the posts together, strip your wires, and connect. Can also mm hole; 25 mm thread length. Sold in red/black pairs.
be used for many other applications, including main input terminals for car audio
enclosures. Accepts up to 8-gauge bare wire, sold in red/black color coded pairs.
#091- 1154 . . . . . . . . . . . . . . . . $9.99 LIST $5.95 (1-3 PRS) $5.35 (4 PRS-UP)
160
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 14/62
7/23/2019 Speacher building.pdf
Dayton Loudspeaker Precision 1% Speaker Building
Metallized Polypropylene Capacitors
• Tightest capacitor tolerance available: ±1%!
Crossover Components
• Specially designed for crossovers and electronics
• Extra-thick tinned copper leads Dayton Loudspeaker Metallized
• 250 VDC, high current capacity Polypropylene Capacitors
Dayton Loudspeaker is once again leading • 250 VDC
the charge at bringing high quality, high • High current capacity
value products to the speaker building • Specially designed for
community. Their new line of 1% crossovers
tolerance capacitors gives you the ability to
construct high-precision crossovers, which Make the Dayton Loudspeaker
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
161 15/62
7/23/2019 Speacher building.pdf
Speaker Building Auricap Metallized Film Capacitors
• Sonically transparent
Crossover Components • Superior technical
specications
• 400 VDC, high current capacity
AudioCap™ Theta Film and Foil Capacitors
• Made in the USA
The PPT Theta AudioCap
Auricap capacit ors are considere d by
is an excellent lm and foil
many to be the nest in the industry.
capacitor for all audio circuits
Tension controlled precision winding
and power supplies. Theta
using high quality metalized lm provides the best possible volume density.
capacitors are made with the
18 gauge stranded leads are constructed of polished high purity oxygen free
nest polypropylene lm and tin
copper with XLPE insulation. If high power and acoustic clarity are a must, here
foil, and are considered by many to be the best audio
capacitor in the world! It provides low distortion performance, long-term is the perfect capacitor. All values are rated at 400 VDC, 10% tolerance.
reliability, and exhibits excellent electrical and environmental characteristics Dimensions Price Price
at a reasonable price. Its sonic signature is rich and full, and its superior build Part # Value Dia. x L (mm) (1-3) (4-UP)
ensures a high quality, stable, long-term performance not usually available 027-650 .10 uF 11 x 13.5 $10.97 $ 10.51
in this price range. The gold-plated OFHC lead wires provide long-term high 027-652 .15 uF 12 x 16.5 11.04 9.93
reliability and excellent solderability, superior to silver wire owing to gold’s non- 027-654 .18 uF 13 x 13.5 11.12 10.01
oxidizing properties. Values 0.01 uF through 0.47 uF are rated 600 VDC; 1.0 uF 027-656 .22 uF 13 x 15 11.19 10.08
027-658 .33 uF 15 x 16.5 11.27 10.15
up are 200 VDC. All values are rated at 10% tolerance. 027-660 .39 uF 15.5 x 16.5 11.42 10.29
027-662 .47 uF 15 x 20 11.66 10.49
Dimensions Price Price Price 027-664 .56 uF 16.5 x 20 11.89 10.70
Part # Value Dia. x L (mm) (1-3) (4-9) (10-UP)
027-666 .68 uF 17.5 x 22 12.64 11.37
027-700 .010 uF 6.9 x 19 $4.32 $3.82 $3.55 027-668 1.0 uF 19.5 x 23 13.77 12.39
027-710 .10 uF 11.2 x 26 6.58 6.03 5.50 027-670 1.5 uF 19 x 30 14.78 13.29
027-714 .22 uF 13.2 x 33 7.87 6.96 6.45 027-672 1.8 uF 23 x 30 15.33 13.80
027-716 .33 uF 14.2 x 32 9.36 8.34 7.73 027-674 2.2 uF 24 x 30 15.98 14.38
027-718 .47 uF 17.3 x 32 12.16 10.71 9.93 027-676 2.7 uF 26 x 29 16.89 15.19
027-722 1.0 uF 16.8 x 33 12.55 11.08 10.26 027-678 3.3 uF 26 x 35.5 15.46 13.92
027-680 18.64 16.77
027-724 2.0 uF 23.6 x 32 16.47 14.59 13.55 027-682 3.6 uF
4.0 uF 30 xx 35.5
28 30.5 18.64 16.78
027-726 3.0 uF 22.1 x 45 21.61 19.09 17.70
027-728 4.0 uF 25.4 x 45 30.70 27.33 25.48 027-684 4.7 uF 34.5 x 31 20.59 18.54
027-730 5.0 uF 28.9 x 45 34.08 30.16 28.01
027-686 5.0 uF 30.5 x 38 20.99 18.88
027-688 6.0uF 26.5 x 57 25.52 22.97
027-732 6.0 uF 31.8 x 45 36.71 32.48 30.16
027-690 6.8 uF 36.5 x 37 30.60 27.54
027-734 7.0 uF 28.2 x 58 39.15 34.52 32.60
027-692 8.0 uF 36 x 43 33.71 30.34
027-736 8.0 uF 30.2 x 58 44.88 39.60 37.40
027-694 10.0 uF 40 x 42 38.27 34.45
027-738 9.0 uF 32.5 x 59 47.16 41.65 38.62
027-696 12.0 uF 43.5 x 42 45.93 41.33
027-740 10.0 uF 33.3 x 59 49.64 43.81 40.61
027-698 18.0 uF 49 x 49.5 57.36 51.63
027-742 12.0 uF 35.8 x 58 54.57 48.13 44.38
162
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 16/62
7/23/2019 Speacher building.pdf
Jantzen Silver Series Speaker Building
Z-Capacitors
Crossover Components
Jantzen Silver capacitors are possibly
the most detailed caps on
the market. These caps are Jantzen Standard Series Z-Capacitors
constructed of a specially wound Jantzen Standard Series
metallized polypropylene to capacitors are constructed
minimize inner vibration, which of metallized polypropylene,
keeps microphonic effects as especially manufactured for audio
low as possible. Silver Series application. The materials used
caps also feature high purity silver leads for the absolute best signal transfer, are carefully chosen for the best
resin-sealed end caps to protect against humidity, and ame-retardant sonic performance and the lowest
tape wrap. The result is a reliable and consistent product that facilitates the possible microphonic effect. Available in a wide range of capacitance values
construction of high quality, precision crossovers. Silver Series caps are natural with low tolerance. Finally, an affordable state-of-the-art capacitor! All values
sounding without audible coloration of the audio signal, delivering an authentic rated at 400 VDC, 5% tolerance.
soundstage and neutral tonal balance. Sonically, they behave more like a ne
piece of wire than a capacitor. Truly, an outstanding audio component! Values Dimensions Price Price
from 0.10 uF through 0.33 are rated at 800 VDC, 0.47 uF and up are 1200 VDC. Part # Value Dia. x L (mm) (1-3) (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
163 17/62
7/23/2019 Speacher building.pdf
Speaker Building Jantzen 18 Gauge Air Core Inductors
The Jantzen 18 gauge air core inductors are
Crossover Components precision wound with high-purity copper wire to a
±3% tolerance. A special Jantzen high-temperature
baking process bonds the wires throughout the
inductor, eliminating the possibility of FM distortion.
The perfect layer air core construction improves heat
dissipation while eliminating hysteresis and any type
of saturation distortion. 300 watts RMS.
Jantzen 15 Gauge Air Core Inductors 255-268 2.20 mH .84 1.93" x 1.18" 12.62 11.55
255-270 2.50 mH .88 1.93" x 1.18" 11.21 10.26
The Jantzen 15 gauge air core inductors offer a
255-272 2.70 mH .92 2.00" x 1.18" 11.49 10.51
lower DCR alternative to the other Jantzen lines.
255-274 3.00 mH .99 2.00" x 1.18" 12.28 11.23
They feature the same quality construction
255-276 3.30 mH 1.04 2.13" x 1.18" 15.93 14.57
including high-purity copper wire wound to a 255-278 3.50 mH 1.10 2.17" x 1.18" 16.84 15.06
±3% tolerance, and the special Jantzen high- 255-280 4.00 mH 1.15 2.24" x 1.18" 17.31 15.82
temperature baking process that eliminates the 255-282 4.50 mH 1.25 1.73" x 1.18" 18.49 16.17
possibility of FM distortion. The perfect layer 255-284 5.00 mH 1.30 2.36" x 1.18" 19.56 17.90
air core construction improves heat dissipation 255-286 6.00 mH 1.45 2.40" x 1.18" 19.74 18.15
while eliminating hysteresis and any type of 255-288 7.00 mH 1.60 2.48" x 1.18" 20.44 18.70
saturation distortion. 500 watts RMS. 255-290 8.00 mH 1.75 2.60" x 1.18" 26.35 24.10
255-292 9.00 mH 1.85 2.71" x 1.18" 29.35 25.17
DCR Dimensions Price Price 255-294 10.00 mH 1.95 2.75" x 1.18" 32.04 29.32
Part # Inductance (ohms) Dia. x H (1-3) (4-UP) 255-296 12.00 mH 2.05 2.83" x 1.18" 34.38 31.45
255-400 .20 mH .13 1.61" x 1.2" $6.84 $6.33
255-402 .25 mH .14 1.65" x 1.2" 7.20 6.67
255-404 .33 mH .16 1.73" x 1.2" 7.98 7.39 For over 100 years, Kester has been manufacturing high
255-406 .39 mH .17 1.81" x 1.2" 7.22 6.69
quality soldering products. As a world leader in soldering
255-408 .47 mH .20 1.84" x 1.2" 9.40 8.71
technology, they continue to offer a variety of products to
255-410 .55 mH .22 1.93" x 1.2" 10.86 10.05
make soldering jobs faster, easier, and with better results
255-412 .60 mH .23 1.96" x 1.2" 11.14 10.32
than ever before! You can count on Kester to provide you
255-414 .68 mH .24 1.98" x 1.2" 11.68 10.81
with the finest soldering materials available today.
255-416 .75 mH .26 2.00" x 1.2" 12.26 11.35
255-418 .82 mH .27 2.05" x 1.2" 12.96 12.00
255-420 .91 mH .29 2.12" x 1.2" 13.38 12.39 Kester® “44” Solder
255-422 1.00 mH .30 2.15" x 1.2" 14.18 13.13 Kester® “44” rosin core solder is designed for
255-424 1.20 mH .33 2.20" x 1.2" 15.48 14.34 electronic and electrical work. It uses a fast
255-426 1.50 mH .38 2.32" x 1.2" 17.52 16.22 acting, instant wetting, non-corrosive, and non-
255-428 1.80 mH .42 2.40" x 1.2" 19.26 17.84
conductive ux for faster soldering and a strong,
255-430 2.00 mH .50 2.20" x 2.4" 24.12 22.33
long lasting bond.
255-432 2.20 mH .52 2.32" x 2.4" 25.12 23.25
255-434 2.70 mH .59 2.40" x 2.4" 27.54 25.50
255-436 3.00 mH .64 2.43" x 2.4" 28.24 26.15 Alloy Price Price
255-438 3.30 mH .66 2.48" x 2.4" 24.98 23.13 Part # Tin/Lead Spool Dia. (1-3) (4-UP)
255-440 4.00 mH .72 2.60" x 2.4" 27.02 25.02 370-080 60/40 1 lb. .031" $23.26 $21.97
255-442 4.70 mH .80 2.63" x 2.4" 35.60 32.96 370-090 60/40 1 lb. .050" 21.41 20.22
255-444 6.00 mH .91 2.79" x 2.4" 32.78 30.35 370-072 63/37 1 lb. .020" 32.39 30.22
255-446 7.00 mH .98 2.91" x 2.4" 35.22 32.61 370-074 63/37 1 lb. .031" 23.22 22.08
255-448 10.00 mH 1.20 3.00" x 2.4" 43.96 40.70
164
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 18/62
7/23/2019 Speacher building.pdf
Jantzen Cross-Coil Copper Foil Inductors Speaker Building
The Jantzen Cross-Coils are premium quality,
audiophile-grade copper foil inductors. They Crossover Components
feature 99.99% pure copper foil windings
separated by an extremely thin layer of
polypropylene lm and tightly wrapped around a
hardwood core. This results in very low magneto
shrinkage factor and virtually zero FM distortion.
The foil approach outperforms conventional
round wire inductors by providing over 12 times Jantzen P-Core Inductors
the surface area through which high-frequency • Powder core
electrons can travel, minimizing skin-effect problems and providing consistently • Extremely low DCR
low power-distortion gures. Very close to the “ideal inductor" in all respects, • High power handling
every coil goes through a specially developed Jantzen anti-oxidizing treatment
The Jantzen P-Core Inductors utilize a Permite
and measurement procedure prior to packaging. Tolerance, ±3.0%. Power
(ferrous powder) material within the core; this creates
handling: 350 watts RMS for 16 gauge, 500 watts RMS for 14 gauge, and 650
signicant lower hysteresis compared to ferrite cores before saturation occurs.
watts RMS for 12 gauge.
P-Core also feature an extremely low DCR and high power handling capability.
All the m aking f or a gr eat woof er or s ubwoofer crossove r induct or.
DCR Dimensions Price Price
Part # Inductance G auge (ohms) Dia. x H (1-3) (4-UP) Power handling: 400 watts RMS.
255-600 0.05 mH 16 0.06 1.38" x 1.00" $7.26 $6.72
255-602 0.08 mH 16 0.08 1.50" x 1.00" 7.56 7.00 DCR Dimensions Price Price
255-604 0.11 mH 16 0.11 1.57" x 1.00" 8.08 7.48 Part # Inductance (ohms) Dia. x H (1-3) (4-UP)
255-606 0.15 mH 16 0.12 1.65" x 1.00" 8.90 8.24 255-100 1.0 mH .13 1.61" x 1.2" $6.42 $5.84
255-608 0.20 mH 16 0.14 1.77" x 1.00" 9.66 8.95 255-102 1.2 mH .14 1.65" x 1.2" 7.42 6.74
255-610 0.22 mH 16 0.15 1.81" x 1.00" 9.92 9.19
255-104 1.5 mH .16 1.73" x 1.2" 7.44 6.76
255-612 0.27 mH 16 0.16 1.89" x 1.00" 10.44 9.67
255-614 0.33 mH 16 0.18 1.97" x 1.00" 11.10 10.28
255-106 1.8 mH .17 1.81" x 1.2" 7.76 7.05
255-616 0.39 mH 16 0.20 2.05" x 1.00" 11.66 10.80 255-108 2.2 mH .20 1.84" x 1.2" 10.46 9.51
255-618 0.47 mH 16 0.22 2.13" x 1.00" 11.40 10.56 255-110 2.7 mH .22 1.93" x 1.2" 9.78 8.89
255-620 0.56 mH 16 0.24 2.24" x 1.00" 13.44 12.45 255-112 3.3 mH .23 1.96" x 1.2" 12.42 11.29
255-622 0.62 mH 16 0.26 2.26" x 1.00" 13.86 12.84 255-114 3.9 mH .24 1.98" x 1.2" 13.14 11.95
255-624 0.68 mH 16 0.27 2.32" x 1.00" 12.42 11.50 255-116 4.7 mH .26 2.00" x 1.2" 14.46 13.15
255-626 0.82 mH 16 0.31 2.40" x 1.00" 15.56 14.41
255-118 5.6 mH .27 2.05" x 1.2" 12.82 11.65
255-628 1.00 mH 16 0.34 2.56" x 1.00" 16.94 15.68
255-120 6.8 mH .29 2.12" x 1.2" 17.28 15.71
255-630 1.10 mH 16 0.36 2.64" x 1.00" 15.02 13.91
255-632 1.20 mH 16 0.38 2.68" x 1.00" 18.34 16.99 255-122 8.2 mH .30 2.15" x 1.2" 15.70 14.27
255-634 1.30 mH 16 0.39 2.72" x 1.00" 18.90 17.51 255-124 10 mH .33 2.20" x 1.2" 18.80 17.09
255-636 1.50 mH 16 0.43 2.83" x 1.00" 20.38 18.86 255-126 12 mH .38 2.32" x 1.2" 24.32 22.11
255-638 1.80 mH 16 0.48 2.99" x 1.00" 19.58 18.13 255-128 15 mH .42 2.40" x 1.2" 25.78 23.44
255-640 2.20 mH 16 0.55 3.15" x 1.00" 21.54 19.94
255-642 2.70 mH 16 0.60 3.35" x 1.00" 27.22 25.21
255-644 3.30 mH 16 0.68 3.50" x 1.00" 29.82 27.61
255-646 3.90 mH 16 0.76 3.70" x 1.00" 28.48 26.37 Jantzen 14 Gauge C -Coil Toroidal
255-648 4.70 mH 16 0.85 3.90" x 1.00" 31.30 28.98
255-650 0.05 mH 14 0.05 1.54" x 1.50" 8.82 8.17
Inductors
255-652 0.08 mH 14 0.06 1.61" x 1.50" 9.16 8.48 • Extremely low resistance
255-654 0.11 mH 14 0.08 1.69" x 1.50" 9.36 8.67 • Designed for low frequency applications
255-656 0.15 mH 14 0.09 1.77" x 1.50" 10.46 9.69
• 700 watts RMS power handling
255-658 0.20 mH 14 0.10 1.85" x 1.50" 13.18 12.21
255-660 0.22 mH 14 0.11 1.93" x 1.50" 12.40 11.48 Introducing new Jantzen C-Coil inductors,
255-662 0.27 mH 14 0.12 2.01" x 1.50" 13.38 12.39 specially engineered for low frequency
255-664 0.33 mH 14 0.13 2.05" x 1.50" 16.28 15.07
255-666 0.39 mH 14 0.15 2.17" x 1.50" 17.48 16.18
applications. These inductors utilize a
255-668 0.47 mH 14 0.16 2.28" x 1.50" 16.64 15.41 toroidal iron core design providing extremely
255-670 0.50 mH 14 0.17 2.30" x 1.50" 17.14 15.87 low resistance and high power handling.
255-672 0.56 mH 14 0.18 2.36" x 1.50" 17.86 16.54 The core is epoxy coated to secure against short circuit even at very high load.
255-674 0.62 mH 14 0.19 2.40" x 1.50" 20.00 18.52 Power handling is massive at 700 watts RMS, making them perfect for high
255-676 0.68 mH 14 0.20 2.48" x 1.50" 20.86 19.31
0.82 mH 14 0.22 2.60" x 1.50"
power passive crossovers.
255-678 22.06 20.43
255-680 1.00 mH 14 0.24 2.72" x 1.50" 23.20 21.48
255-682 1.10 mH 14 0.25 2.76" x 1.50" 24.14 22.35 DCR Price Price
255-684 1.20 mH 14 0.27 2.83" x 1.50" 25.08 23.22 Part # Inductance (ohms) (1-3) (4-UP)
255-686 1.50 mH 14 0.31 3.03" x 1.50" 27.76 25.70 255-804 1.50 mH .049 $25.83 $23.76
255-688 1.80 mH 14 0.36 3.15" x 1.50" 30.26 28.02 255-808 2.20 mH .060 25.75 23.68
255-690 2.20 mH 14 0.40 3.35" x 1.50" 38.90 36.02
255-812 3.30 mH .070 23.27 21.41
255-692 2.70 mH 14 0.44 3.50" x 1.50" 42.70 39.54
255-694 3.30 mH 14 0.50 3.70" x 1.50" 40.46 37.46
255-816 3.90 mH .069 32.10 29.55
255-696 3.90 mH 14 0.55 3.90" x 1.50" 44.46 41.17 255-820 4.70 mH .072 32.56 29.95
255-698 4.70 mH 14 0.60 4.09" x 1.50" 49.46 45.80 255-824 5.60 mH .078 32.62 30.01
255-700 12.96 12.00
255-702 0.05
0.08 mH
mH 12
12 0.04
0.05 1.46"
1.61" xx 2.10"
2.10" 13.92 12.89 255-828 6.80 mH .083 33.10 30.46
255-832 8.20 mH .095 33.62 30.93
255-704 0.11 mH 12 0.05 1.73" x 2.10" 15.34 14.20 255-836 10.00 mH .102 34.14 31.41
255-706 0.15 mH 12 0.07 1.81" x 2.10" 18.92 17.52
255-840 12.00 mH .114 34.70 31.92
255-708 0.20 mH 12 0.08 1.89" x 2.10" 18.64 17.26
0.22 mH 12 0.08 1.97" x 2.10"
255-844 18.00 mH .174 45.03 41.42
255-710 19.38 17.94
255-712 0.27 mH 12 0.09 2.05" x 2.10" 24.04 22.26
255-714 0.33 mH 12 0.10 2.13" x 2.10" 23.02 21.31
255-716 0.39 mH 12 0.11 2.28" x 2.10" 24.56 22.74
255-718 0.47 mH 12 0.12 2.36" x 2.10" 26.58 24.61
Whatever the soldering
255-720 0.56 mH 12 0.13 2.48" x 2.10" 28.66 26.54 job, Weller® has the
255-721 0.62 mH 12 0.14 2.54" x 2.10" 29.92 27.70
solution for your needs.
255-722 0.68 mH 12 0.15 2.64" x 2.10" 31.14 28.83
255-724 0.82 mH 12 0.16 2.72" x 2.10" 33.84 31.33
255-726 1.00 mH 12 0.18 2.83" x 2.10" 37.56 34.78
Weller WLC100
255-728 1.10 mH 12 0.19 2.95" x 2.10" 39.24 36.33 Soldering Station
255-730 1.20 mH 12 0.20 2.99" x 2.10" 40.94 37.91
255-732 1.30 mH 12 0.22 3.11" x 2.10" 42.60 39.44 The Weller WLC100 soldering station is ideal for
255-734 1.50 mH 12 0.23 3.19" x 2.10" 45.80 42.41 the professional, serious hobbyist, or kit builder
255-736 1.80 mH 12 0.26 3.35" x 2.10" 49.60 45.93 who demands higher performance than usual
255-738 2.00 mH 12 0.27 3.46" x 2.10" 52.18 48.31 of a standard iron, but without the high cost of
255-740 2.20 mH 12 0.29 3.50" x 2.10" 54.96 50.89
255-742 2.70 mH 12 0.33 3.70" x 2.10" 61.28 56.74 an industrial unit. Power is adjustable from 5 to 40 watts. Includes 40 watt
255-744 3.30 mH 12 0.37 3.90" x 2.10" 81.08 75.07 pencil iron. UL approved. 120 VAC. Replacement sponge #372-118.
255-746 3.90 mH 12 0.41 4.09" x 2.10" 89.52 82.89
255-748 4.70 mH 12 0.45 4.33" x 2.10" 98.74 91.43 #372- 120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.34 LIST $54.75 EACH
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
165 19/62
7/23/2019 Speacher building.pdf
Speaker Building
18 Gauge Perfect Layer
Crossover Components
Wound Air Core Inductors
Perfect layer wound, oxygen-free air core
18 Gauge Laminated “I”
inductors are precision wound with 18 gauge
Core Inductors wire to a ±2 % tolerance. They offer reasonably
High grade laminated “I” core inductors are a perfect lower low DC resistance, 300 watt power handling
cost alternative for providing large inductance values with capability, and no saturation,
low DC resistance and efcient power hysteresis or magneto striction
transfer. Wound with 18 gauge wire to ±5% distortion. Made in the USA.
tolerance, these “I” core inductors will easily
266-950
266-952 13.00
14.00 mH
mH .431
.459 23.49
26.66 21.44
24.32 266-355
266-360 1.20
1.50 mH
mH .24
.28 3-1/8"
3-3/16" 21.10
24.46 19.29
22.42
266-954 15.00 mH .476 27.12 24.70 266-365 1.80 mH .30 3-1/4" 27.71 25.35
266-956 17.00 mH .515 28.23 25.71 266-370 2.00 mH .31 3-3/8" 25.60 23.34
266-958 18.00 mH .534 26.95 24.52 266-375 2.20 mH .33 3-9/16" 28.44 26.03
266-960 20.00 mH .558 32.29 29.60 266-380 2.50 mH .36 3-11/16" 33.93 31.33
166
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 20/62
7/23/2019 Speacher building.pdf
L-Pads Speaker Building
If your tweeter or midrange has too much output relative
to the woofer, an L-pad will allow you to dial-in the
Crossover Components
needed amount of attenuation. L-pads are unique in
that they do their job without negatively impacting the Dayton Loudspeaker 10W
performance of the crossover network. Simply choose Non-Inductive Resistors
the impedance of the driver you want to adjust, whether
you need mono or stereo operation, the desired power • Gold plated leads • Low noise design
handling, and which type of shaft length you need. Includes faceplate, knob, • Audio grade • Precision 2% tolerance
hardware, and wiring instructions. These low noise “Audio Grade” resistors are perfect
for use in Zobel networks and xed L-pad attenuator
Power Shaft Price Price
Part # Type RMS Impedance Length (1- 9) (10-UP)
circuits for tweeters. They feature nickel-chromium
260-248 Mono 15 watt 8 3/8" $4.80 $3.95 elements, a high thermal conductivity ceramic
core and all welded construction that enhance their low noise performance.
260-250 Mono 15 watt 8 1" 4.50 3.80
With precision 2% tolerance (values below 1 ohm are 5%
260-251 Stereo 15 watt 8 1" 8.85 8.35
260-252 Mono 50 watt 8 3/8" 8.90 7.85
tolerance), gold plated oxygen free copper leads and
260-254 Mono 50 watt 16 3/8" 8.90 7.85 non-inductive construction, these resistors are
260-255 Mono 50 watt 8 1" 8.90 7.85 perfect for your next speaker project!
260-260 Stereo 50 watt 8 1" 15.50 13.30 Dimensions: 48 mm L x 10 mm W x 10
260-261 Mono 100 watt 16 3/8" 9.90 9.25 mm H. Sold individually.
260-262 Mono 100 watt 8 3/8" 9.25 8.50
260-264 Stereo 100 watt 8 1" 18.50 16.10 Values
260-265 Mono 100 watt 8 1" 9.95 9.25 .33 1.5 3.3 5.1 7.5 16
.51 2 3.7 5.6 8 20
.82 2.4 4 6 9.1 25
1 2.7 4.3 6.5 10 30
Dual L-Pad Faceplate 1.2 3 4.7 7 12.5 40
Special recessed L-pad housing for High a nd Mid L-pads.
Comes complete with two knobs. 2-9/16" x 5-3/16" x 1". For use #004- (Value ) . . . . . . . . . . . . . . . . . . . . . $1.79 LIST $1.25 (1-9) 98¢ (10-UP)
with L-pads listed above.
#260- 274 . . . . . . . . . . . . . . . . . . . . . . $1.25 (1-9) 95¢ (10-UP)
Mills 12W Non-Inductive
L-Pad Face Plates Resistors
These non-inductive,
Recessed L-pad faceplate for ush mounting L-pads in
wire wound resistors were
custom speaker cabinets. Knob included. 2-5/8" x 2-2/8"
designed for high-end audio applications and are perfec t
x 1. For use with 3/8" shaft length L-pads listed above.
for use in crossover networks. Extreme measures were taken to ensure sonic
#260- 268 (High) purity. They utilize an Alumina ceramic core, a nickel chromium element, silver
#260- 270 (Mid) . . . . . . . . . . . . . . 90¢ (1-9) 75¢ (10-UP) plated copper end caps and tinned copper leads. The all welded construction
greatly enhances frequency response. These 1% precision resistors, offer
unsurpassed performance over conventional wire wound resistors. All are
Speaker Control Panels rated at 12W with 1% tolerance. Resistors’ body measures 1-1/8" in length
by 5/16" diameter. Each lead measures 1-1/2" long and .040" thick. Sold
Deluxe control panel has L-pad attenuators for
individually. 1% tolerance.
both tweeter and midrange adjustment, and
an LED bar graph type power meter built into
Values
one sleek, high tech design unit. Measures
2-1/2" x 5". .5 1.5 3.5 6 12.5 30
1 2 4 7 15 47
Price Price
1.2 2.5 4.5 8 20 82
Part # Description (1-5) (6-UP)
3 5 10
260-235 50 watt panel $18.79 $16.67
260-240 100 watt panel 22.85 20.98
#005- (Value ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.50 (1-9) $3.25 (10-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
167 21/62
7/23/2019 Speacher building.pdf
Speaker Building
2-Way Crossovers
Assembled Crossovers The Dayton
Loudspeaker
2-Way 100 Watt High Pass Crossover line of 2-way
crossovers
This crossover is ideal for use in small 2-way
were designed
surround sound speakers. There is no low
using a
pass lter section so the woofer will reproduce
second order (12 dB) Linkwitz-Riley
its full bandwidth. A 12 dB per octave high
alignment. Metallized polypropylene
pass lter with your choice of either a 3,000
capacitors are used in both the high
Hz or 5,000 Hz crossover point. Dimensions:
and low pass sections. 18 gauge inductors were used
3-1/2" W x 2-3/4" D x 1" H.
to keepof
feature DC resistance
the low pass to a minimum.
section allows Ause
unique design
of 4 or 8 ohm
#260- 174 (3,000 Hz)
#260- 175 (5,000 Hz) . . . . . . . . . . . . . . . . . . . . . . . . . $8.90 (1-5) $7.50 (6-UP) woofers, perfect for building D’Appolito style or multi-
woofer 2-way systems. The high pass crossover frequency is rated for
an 8 ohm load. All components are glued or fastened down to eliminate
buzzing and vibrations. The high quality blue PC board uses a back plate
2-Way 150 Watt Network
for added rigidity and eyelet holes for easy mounting. Available in a variety
This crossover is ideally suited for satellite of crossover points. 300W power handling. Board measures: 6-1/2" W x
applications. The low pass section rolls off 6 dB 4-1/4" H x 1-3/8" D.
at 5,000 Hz. The high pass section has a 12 dB
per octave slope to prevent possibly damaging Crossover List Price Price
low frequencies below 4,500 Hz from reaching the Part # Frequency Price (1-5) (6-UP)
tweeter. All crossover frequencies are rated into 260-140 2,000 Hz $ 35.99 $ 27.67 $ 26.35
an 8 ohm load. Dimensions: 4-7/8" W x 3-1/2" D x 1-1/2" H. Replacement tweeter 260-142 2,500 Hz 35.99 27.67 26.35
protector #260-231. 260-144 3,000 Hz 35.99 27.67 26.35
260-146 3,500 Hz 35.99 27.67 26.35
#260- 198 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.90 (1-5) $8.50 (6-UP) 260-148 4,500 Hz 35.99 27.67 26.35
Crossover PC Boards
3-Way 200 Watt Network
Design and build your own speaker
This network is an excellent choice for crossovers. Common circuit designs
high power 3-way systems. The woofer allow you to install any coil/cap
section rolls off 6 dB at 800 Hz while
the tweeter section uses a 12 dB per combination to reach your desired
crossover frequency point. Super
octave roll off at 4,500 Hz. The midrange quality, pre-etched heavy berglass
section uses a true band pass lter with boards with riveted and soldered
a response of 750-5,000 Hz. 12 dB per terminals. Comes with wiring diagram
octave roll off. All crossover frequencies and typical applications. Soldering
are rated into an 8 ohm load. Dimensions: 7" W x 4" D x 1-1/2" H. Replacement required. Made in the USA.
tweeter protector #260-231.
#260- 230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.80 (1-5) $29.40 (6-UP)
A B
insulated female disconnects on both ends, these are perfect for line arrays! 260-120 A 2-way 12 dB 3-3/4" x 5-1/2" $ 6.80 $ 6.25
24 ga. wire 22" length. 260-122 B 3-way 12 dB, small 4" x 7" 8.80 7.50
260-124 B 3-way 12 dB, large 5" x 9" 15.50 14.25
#260- 170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95¢ (1-7) 85¢ (8-UP)
168
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 22/62
7/23/2019 Speacher building.pdf
General Purpose Speaker Surround Speaker Building
Repair Kits
Speaker Repair
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
169 23/62
7/23/2019 Speacher building.pdf
Speaker Building
Books & Software
•
• Measures VAS using
Straightforward, added mass,
easy-to-use test box software
measurement or SPL method
• Manufactured on state-of-the-art equipment using surface mount components
Dayton Audio’s WT3 makes measuring loudspeaker driver parameters easier,
faster and more accurate than ever before. While previous generation woofer
testers took around 6 minutes to measure 30 impedance points, the new WT3
measures over 30,000 data points in only a few seconds using a new swept sine
technique that is only available with the WT3. The result is a very high-resolution
impedance measurement that allows the extraction of an extremely accurate driver
parameter set, suitable for the most critical loudspeaker design work. VAS can
be measured by traditional test box, added mass or, more conveniently, just by
specifying the 1W/1m SPL of the driver. No other loudspeaker impedance tester is
as fast, versatile or as easy to use as the WT3.
System Requirements
• IBM PC or compatible system with 64MB Memory RAM or more • 500 MHz Pentium III processor or higher • Compliant with both USB 2.0/1.1 interface • MS
#500- 037 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.95 LIST $9.85 EACH #500- 021 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.95 LIST $17.95 EACH
170
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 24/62
7/23/2019 Speacher building.pdf
Speaker Building
True Audio’s TrueRTATM
• Low distortion signal generator Books & Software
• Digital level meter
• Dual trace oscilloscope WinSpeakerz ® Introduction
• High-resolution real time audio
spectrum analyzer to Loudspeaker Design
True Audio’s Level Two (1/3 octave) Now you can build great
TrueRTA is a real-time software- sounding loudspeakers that
based audio instrument for testing you might pay hundreds or
and evaluating audio systems. All
even thousands of dollars for
you need is a PC with basic sound
at an audio salon!
capability. TrueRTA
digital voltmeter thatalso includes
reads true • Inexpensive
RMS voltage and dBu levels, and an audio spectrum a nalyzer. • Easy to use
• Great learning tool
To set up your own audio test lab you will need a digital voltmeter to calibrate
TrueRTA™ and a collection of cables and adapters for connecting electronic WinSpeakerz is a loudspeaker
gear to your sound card for testing. Most sound card jacks are 1/8". If you simulation program for Windows
want to do acoustic testing of loudspeakers in addition to the above y ou will 95/98/ME/NT/2000/XP. This popular speaker simulator lets you propose
need a calibrated microphone, a microphone preamplier or mixer, an audio various speaker systems and then evaluate them in software before you
power amplier to drive the speaker under test, and cables to connect the cut wood or order expensive transducer components. Besides enclosure
line out of the sound card to the input of the audio power amp. Software ca n simulation, WinSpeakerz supports speaker builders with various box and
be upgraded to Level Three (1/6th octave) or Level Four (1/24th octave). crossover calculators to see your projects to completion. Impedance
Minimum system requirements: 500 MHz Pentium III processor or equivalent compensators and tweeter attenuators can also be designed quickly. Just
and 64MB of RAM. enter a few parameters and the component values are calculated as you type.
*Visit parts-express.com for more details *Visit parts-express.com for more details
#500- 944 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.95 EACH #500- 946 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.00 EACH
Powerful Capabilities This is a very advanced program and is one of the most powerful design
Design 2 or 3-way passive packages available at any price. Note: This software is recommended for
crossover networks, separate the advanced speaker builder due to the large number of variables and very
low-pass, band-pass or complex nature of the content.
high-pass lters, impedance *Visit parts-express.com for more detailed information
equalization networks, L-pads
#500-912 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $299.99 LIST $249.99 EACH
and series or parallel notch
lters. It’s internal Thiele-Small
modeling engine and impedance Eminence Designer Speaker
equalization networks provide
excellent results without costly
Cabinet Design Software
measurements or optimizers. Eminence Designer is a state-of-the-art
*Visit parts-express.com for more detailed information speaker enclosure design program for
PCs running Windows 95, 98, NT4 or later.
#500- 919 (CD-ROM) . . . . . . . . . . . . . . . . . . . . . . . . $99.00 LIST $84.90 EACH
With Eminence Designer, box design is as
easy at 1-2-3.
Pro Combo with BassBoxTM
Eminence Designer models closed, vented,
6 Pro and X•over 3 Pro
bandpass and passive radiator boxes, and
it will print box drawings and graphs for a
#500- 927 (CD-ROM) . . . . . . .$199.00 LIST $169.80 SET professional presentation. Eminence Designer
is quick to learn and easy to use.
BassBoxTM Lite for Windows System Requirements: Microsoft Windows 95, 98, NT4 or later and a
compatible computer (IBM PC with a Pentium processor or equivalent) with at
BassBox Lite is a streamlined version of BassBox Pro, with 85% of the Pro least 16 MB of RAM (32 MB recommended), 17-23 MB of free hard disk space
features. and a CD-R compatible CD-ROM or DVD drive. The Arial and Symbol TrueType
*Visit parts-express.com for more detailed information fonts must be installed (both fonts are a standard part of Windows).
#500- 921 (CD-ROM) . . . . . . . . . . . . . . . . . . . . . . . . $69.00 LIST $58.90 EACH #500- 945 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $84.99 LIST $79.97 EACH
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
171 25/62
7/23/2019 Speacher building.pdf
Speaker Building
Drivers
4" Goldwood GW-204/4S 4 40 83 1.5 1.69 0.03 148 0.58 71 2.50 0.75 290-370 185
4" Goldwood GW-204/8S 8 40 84 1.5 1.56 0.09** 116 0.52 72 2.50 1.00 290-372 185
4" Goldwood GW-4028/S 8 40 84 1.5 0.69 0.10 108 0.25 57 1.00 0.84 290-373 184
4" Hi-Vi B4N 8 25 85 3.2 0.52 0.39 124 0.14 64 1.00 4.80 297-429 196
4" Hi-Vi M4N 8 20 82 3 1.08 0.17 71 1.06 38 2.00 1.61 297-434 196
4" Morel MW-113 8 150 87 3 0.75 0.29 85 0.52 44 1.50 2.10 297-010 199
4" Morel MW-114S 8 150 87 3. 5 0.40 0.05* 181 0.09 120 1.00 6.69 297-012 199
4" Morel CAW428 8 150 88 4 0.38 0.11* 170 0.19 78 1.00 1.88 297-080 201
4" Tang Band W4-654S 8 40 86 3 0.48 0.03 147 0.13 84 1.00 5.25 264-816 192
4" Tang Band W4-1052SA 4 45 87 3.4 0.44 0.06 127 0.20 64 1.00 2.40 264-828 192
4" Tang Band W4-616S 8 40 88 3 0.34 0.04 178 0.11 106 1.00 3.12 264-818 192
4" Tang Band W4-656SB 8 45 87 3 0.35 0.06 135 0.17 69 1.00 2.60 264-820 191
4" Tang Band W4-992S 8 50 86 3 0.35 0.03 146 0.84 64 1.00 6.50 264-824 193
4" Tang Band W4-1337S 8 25 87 3 0.37 0.03 161 0.11 92 1.00 3.24 264-848 192
4" Tang Band W4-1320SB 8 25 89 3 0.37 0.05 176 0.13 100 1.50 5.25 264-846 192
4" Tang Band W4-657S 8 30 88 3 0.38 0.05 145 0.15 82 1.00 2.60 264-817 192
4" Tang Band W4-937S 8 25 88 4.5 0.26 0.04 221 0.08 110 1.00 3.36 264-821 192
4-1/2" Pioneer A11EC80-02F 8 20 90 1.1 0.35 0.06 170 0.16 100 1.00 1.50 290-010 187
5" Dayton RS125S-8 8 30 87 2.8 0.44 0.17* 138 0.20 64 1.00 2.50 295-360 175
5" Dayton RS125-4 4 30 88 3.5 0.52 0.07 107 0.30 47 1.00 2.75 295-370 175
5" Hi-Vi F5 8 70 86 2.75 0.41 0.33* 107 0.44 51 1.38 3.90 297-435 197
5" Hi-Vi M5N 8 35 85 2.5 0.42 0.12 101 0.33 54 1.00 2.50 297-436 196
5" Hi-Vi D5G 8 120 83 4.8 0.38 0.12 83 0.33 47 1.00 4.18 297-419 197
5" Hi-Vi M5A 8 35 85 2.5 0.46 0.15 92 0.44 47 1.00 1.90 297-437 196
5" Hi-Vi D5.8 8 60 84 5 0.39 0.23* 97 0.33 47 1.00 3.39 297-439 197
5" Jantzen JA5006 6 100 85 6 0.53 0.14 104 0.37 49 1.50 4.75 297-700 204
5" Morel MW-143 8 150 89 3.5 0.36 0.13* 161 0.24 105 1.50 6.90 297-052 202
5" Morel MW-144 8 150 88 3.5 0.55 0.09 110 0.25 65 1.50 7.90 297-022 199
5" Morel H5.1 8 150 88 3.5 0.36 0.11 114 0.28 69 1.50 6.20 297-060 200
5" Morel H5.2 8 150 88 3.5 0.36 0.09 112 0.21 73 1.50 8.75 297-062 200
5" Morel HU521 8 160 88 3.5 0.37 0.11 111 0.27 67 1.50 6.80 297-070 200
5" Morel HU531 8 180 86 4.25 0.37 0.09 104 0.22 64 1.00 3.75 297-074 200
5" Morel CAW538 8 150 86 3 0.38 0.21* 114 0.34 52 1.50 6.60 297-082 201
5-1/4" Auru m Ca ntus AC-1 30F1 8 60 89 5 0.29 0.12 111 0.32 70 1.50 5.75 296-400 203
5-1/4" Auru m Ca ntus AC-1 30MKI I 8 60 90 5 0.28 0.26*
0.26 * 122 0.51 78 1.00 1.87 296-404 203
5-1/4" Dayton DC130AS-8 8 30 88 2.5 0.40 0.17 93 0.49 51 1.38 3.80 295-300 180
5-1/4" Dayton DC130BS-8 8 30 88 2. 5 0.40 0.14 103 0.40 58 1.38 3.55 295-301 183
5-1/4" Dayton DC130BS-4 4 30 89 2. 5 0.34 0.10 120 0.23 75 1.38 5.00 295-302 183
5-1/4" Dayton DA135-8 8 30 85 3 0.46 0.10 98 0.32 52 1.38 5.60 295-330 181
5-1/4" Dynavox LW5005PMR 8 100 85 3 0.54 0.16 79 0.50 39
39 1.50 5.30 295-600 183
5-1/4" Goldwood GW-205/4S 4 70 87 2 0.68 0.30 106 0.52
0.52 54 1.38 0.70 290-374 185
5-1/4" Goldwood GW-205/8S 8 70 87 2 0.81 0.31 93 0.72 50 2.00 1.30 290-376 185
5-1/4" Goldwood GW5028/S 8 70 85 2 0.90 0.21** 84 0.75 46 1.50 0.57 290-377 184
5-1/4" Tang Band W5-1138SA 4 40 82 9.25 0.49 0.12 77 0.39 39 2x2 8.50 264-831 193
5-1/4" Tang Band W5-876SA 8 50 86 5 0.33 0.08* 143 0.15 99 1.00 6.11 264-826 193
5-1/4" Tang Band W5-704S 8 25 88 3 0.37 0.30* 131 0.29 73 1.50 4.35 264-850 192
5-1/2" Goldwood GW-S525-8 8 70 87 2 0.84 0.20** 88 0.58 47 1.50 1.15 290-302 183
5-1/2" Goldwood GW-S525-4 4 70 87 2 0.88 0.29** 77 0.75 31 1.50 1.20 290-301 183
6" Dayton RS150S-8 8 40 88 4 0.40 0.14 101 0.40 57 1.50 4.60 295-362 175
6" Dayton RS150-4 4 40 89 4.4 0.41 0.12 115 0.36 64 1.50 4.00 295-372 175
6" Hi-Vi F6 8 60 89 3.55 0.38 0.21 94 0.56 54 1.50 3.71 297-440 197
172
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 26/62
7/23/2019 Speacher building.pdf
Speaker Building
Drivers
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
173 27/62
7/23/2019 Speacher building.pdf
Speaker Building
Drivers
10"
10" Goldwood
Hi-Vi GW-210/4
F10 4
8 70
120 88
90 3.5
6.5 1.21
0.31 2.10**
0.50 42
78 NR
1.
1.10
10 -
49 - 10.00
2.50 - 290-320
297-450 185
197
10" Hi-Vi D10G 8 150 88 8.25 0.41 1.70 46 4.90 25 22.50
.50 4.17 297-430 197
10" Hi-Vi D10.8 8 150 87 8.3 0.40 2.00 43 5.80 22 22.50
.50 4.13 297-453 197
10" Hi-Vi SP10 4 500 84 15.5 0.57 0.44 50 1.30 24 2.50 14.25 297-460 195
10" Morel MW-1075 8 180 89 4.25 0.62 4.28 41 10.20 22 33.00
.00 1.00 297-045 199
10" Morel MW-1077 8 200 90 4.25 0.51 2.60 48 8.40 24 33.00
.00 1.90 297-058 202
10" Morel H10.1 8 200 91 4.25 0.35 1.26 62 3.38 37 22.50
.50 3.23 297-068 200
10" Pioneer A25FU30-51D 6 70 91 2.9 0.20 0.38 112 0.77 74 22.50
.50 6.79 290-095 189
10" Pioneer A25FU20-53F 8 60 84 2.4 0.27 0.51 110 1.10 71 22.50
.50 3.50 290-083 188
10" Pioneer W25GR31-51F 8 90 90 3 0.34 0.91 67 2.20 39
39 22.50
.50 5.35 290-088 189
10" Tang Band WT-1427B 4 120 88 9.5 0.29 0.53* 78 1.10 49 2.00 12.80 264-862 193
10" Usher 1001A 8 100 88 5 0.39 0.93 63 2.57 36 33.00
.00 6.90 296-624 204
10" DVC Auru m Ca ntus AC- 250F1 S 4 200 87 8 0.43 1.95 39 6.20 23 22.50
.50 2.60 296-432 202
10" DVC Dayton SD270-8-8 4 80 90 6 0.38 0.95 56 2.60 24 33.00
.00 9.50 295-485 179
10" DVC Goldwood G W-410D 6 110 94 3 0.61 1.90 56 4.62 28 33.00
.00 1.75 290-362 185
12" Dayton QT305-4 4 250 91 10 0.36 1.00 65 2.50 40 33.00
.00 7.75 295-555 179
12" Dayton TI320C-4 4 500 86 18.7 0.44 1.00 44 3.00 25 3.00 16.00 295-404 177
12" Dayton ST305-8 8 275 92 8 0.34 1.10 68 2.60 42 33.00
.00 6.13 295-120 181
12" Dayton DC300-8 8 80 92 4.3 0.37 1.15 65 3.10 38 33.00
.00 5.00 295-320 180
12" Dayton RSS315HF-4 4 400 86 14 0.44 1.20 44 3.40 24 3.00 12.60 295-464 176
12" Dayton RSS315HF-8 8 400 86 14 0.49 1.36 44 4.32 22
22 33.00
.00 9.30 295-444 176
12" Dayton RSS315HO -4 4 700 85 12 0.40 0.50 56 1.50 31 3.00 22.80 295-466 176
12" Goldwood GW-12PC-50-4 4 140 90 3.5 0.39 0.78 69 2.10 40 33.00
.00 7.28 290-332 186
12" Goldwood GW-12PC-50-8 8 140 90 3.5 0.49 1.30 55 1.40 48 33.00
.00 1.80 290-334 186
12" Goldwood GW-212/4 4 120 87 3.5 1.17 3.34** 50 NR - - - 290-330 185
12" Goldwood GW-212/8 8 70 87 3.5 1.44 2.4** 41 NR - - - 290-335 185
12" Goldwood GW-1248 8 100 87 5 0.89 4.6** 35 N
NRR - - - 290-365 186
12" Goldwood GW-1244 4 100 87 5 0.68 5.90 38 NR - - - 290-366 186
12" Hi-Vi M12 8 150 93 7.2 0.33 1.34* 71 2.
2.50
50 36 33.00
.00 9.70 297-456 196
12" Hi-Vi F12 8 200 90 6.5 0.39 1.19 62 3.23 35 33.00
.00 4.93 297-455 197
12" Pioneer A30GU40-51D 6 100 94 2.5 0.16 0.50 120 1.00 82 33.00
.00 6.25 290-125 189
12" Pioneer A30IR50-51F 8 150 91 3.1 0.25 1.20 64 2.50 40 33.00
.00 8.25 290-118 189
* 0.5 sealed alignments and extended bass for the vented See page 210 for Pro Sound- specific drivers
** Qtc is equal to the Qts
174
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 28/62
7/23/2019 Speacher building.pdf
Dayton Loudspeaker Reference Series Speaker Building
The Dayton Loudspeaker Reference Drivers
Series was conceiv ed with one
goal in mind—low disto rtion. Each
driver was carefully designed and optimized to offer the highest performance with the lowest
distortion levels. At the same time, by focusing on features that contributed to the sound quality and
eliminating the unnecessary frills, the drivers offer unparalleled value in the industry. That’s why the
Reference Series has beco me the choice amo ng project bu ilde rs and pro fessional audiophile s a like .
• 8 ohm shielded version allows extremely close proximity to video and CRTs • Subtle yet high-tech look makes a bold cosmetic statement
• 4 ohm non-shielded version is ideal for high-end car audio applications • Designed and engineered in the USA
• Long-excursion motor and suspension for strong bass performance
#295- 360 . . . . . . . . . . . . . . . . . . . . $30.99 LIST $23.66 (1-3) $22.54 (4-UP) #295- 370 . . . . . . . . . . . . . . . . . . . . $34.99 LIST $26.58 (1-3) $25.31 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
175 29/62
7/23/2019 Speacher building.pdf
Speaker Building High Output
Drivers • 4-layer high-temperature coils for maximum power handling
• Stiffer suspensions for greater mechanical control
• Heavy-gauge aluminum cones withstand pressures of small enclosures
• Black anodized aluminum cone for extreme rigidity
Subwoofers • Triple shorting-ring motor for ultra-low distortion
RSS315HF-4: • Power handling: 400 watts These tweeters feature unique black anodized
RMS/700 watts max • VCdia: 2-1/2" • Le: .95 1-1/8" aluminum diaphragms, cast aluminum
mH • Impedance: 4 ohms • Re: 3.3 ohms faceplates and state-of-the-art motor systems to
• Frequency range: 23-1,000 Hz • Fs: 23 provide extremely clean, detailed, and uncolored sound.
Hz • SPL: 89 dB 2.83V/1m • VAS: 3.00 cu. ft. RS28A-4 (non-shielded): • Power handling: 100 watts RMS/150 watts max (with
• QMS: 3.00 • QES: .52 • QTS: .44 • XMAX: 14 mm
appropriate crossover) • VC DIA: 1-1/8" • Impedance: 4 ohms • Re: 3.0 ohms
• Dimensions: A:
• Frequency range: 1,600-20,000 Hz • Fs: 600 Hz • SPL: 91 dB 2.83V/1m
12-3/8", B: 11-1/8", C: 5-3/8".
• Dimensions: A: 4-1/8", B: 3-1/4", C: 1-3/4". Replacement diaphragm 275-132.
RSS315HF-8: • Power handling: 400 watts RMS/700 watts max • VCDIA: 2-1/2" RS28AS-4 (shielded): All specs the same except: • Fs: 800 Hz.
• Le: 1.71 mH • Impedance: 8 ohms • Re: 6.9 ohms • Frequency range: 25 -
1,000 Hz • Fs: 25 Hz • Magnet weight: 150 oz. • SPL: 86 dB 2.83 V/1m • VAS: #275- 130 (RS28A-4 non-shielded) . . $59.99 LIST $48.65 (1-3) $44.47 (4-UP)
2.75 cu. ft. • QMS: 3.12 • QES: .58 • QTS: .49 • XMAX: 12.3 mm • Dimensions: A: #275- 135 (RS28AS-4 shielded) . . . . $64.99 LIST $55.87 (1-3) $49.88 (4-UP)
12-3/8", B: 11-1/8", C: 5-3/8".
#295- 444 (8 ohm) RS52AN-8 2" Aluminum
#295- 464 (4 ohm) . . . . . . . . . . $179.99 LIST $138.24 (1-3) $131.66 (4-UP) Dome Midrange
• Copper clad motor reduces distortion
RSS390H F-4 15" Reference HF Subwoofer • Large damped rear chamber
• 2" aluminum diaphragm
Specifications: • Power handling: 500
• Neodymium magnet
watts RMS/800 watts max • VCDIA:
2-1/2" • Le: 1.00 mH • Impedance: This dome midrange delivers excellent off-axis response
4 ohms • Re: 3.3 ohms • Frequency and midrange performance. High quality construction includes
range: 18-800 Hz • Fs: 18 Hz • SPL: a cast aluminum faceplate, metal grill, vented former, and copper clad pole piece.
90 dB 2.83V/1m • VAS: 9.55 cu. ft. • QMS: Specifications: Power handling: 60 watts RMS/90 watts max • VCDIA: 2"
3.10 • QES: .49 • QTS: .42 • XMAX: 14 mm • Impedance: 8 ohms • Re: 5.4 ohms • Frequency range: 500-7,000 Hz • Fs:
• Dimensions: A: 15-5/16", B: 14-1/8",
325 Hz • SPL: 91 dB 2.83V/1m • Dimensions: A: 5-1/8", B: 4-1/8", C: 2-1/8".
C: 6-1/8".
#285- 020 . . . . . . . . . . . . . . . . . . . $53.99 LIST $40.78 (1-3) $38.83 (4-UP)
#295- 468 . . . . . . . . . . . . . . . . $199.99 LIST $159.80 (1-3) $151.90 (4-UP)
176
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 30/62
7/23/2019 Speacher building.pdf
A. Rigid Cast Frame Speaker Building
The cast aluminum basket features aerodynamic supports that provide maximum
rigidity for the motor structure without impeding air movement from the rear of the Drivers
cone or causing unwanted reections. The mounting ange f eatures a thick rubber
gasket that not only provides an air tight seal but also looks cool!
through the spider. This eliminates “lead slapping” during extreme excursion.
TIT280C-4 10" Titanic MKIII TIT320C-4 12" Titanic MKIII TIT400C-4 15" Titanic MKIII
Subwoofer Subwoofer Subwoofer
Building on the reputation of the 10" MKII We took our most popular subwoofer driver To produce loud, hard hitting, deep bass, you
subwoofer, the MKIII sub excels at producing and improved both its power handling and its need to move a lot of air, and the 15" Titanic MKIII
very clean and musical bass in a small enclosure. performance. The 12" MKIII subwoofer is ideal for will do just that! With its large surface area and
Reaping the benets of the MKIII improvements, most home theater environments and will produce long excursion, the 15" MKIII will sweep over 1.5
this woofer is now even better for medium-duty prodigious amounts of output in just about any liters of air! Optimized for a va riety of enclosures,
home theater applications in small-to-medium listening room. Works great in sealed or vented the 15" MKIII is THE driver when you are looking to
sized rooms. The small 10" size is perfect for enclosures, this is the woofer of choice for most build the ultimate home theater subwoofer!
multi-driver or multi-subwoofer situations. With an rooms, offering outstanding performance and a Thiele-Small Parameters: • Power handling: 800
upgraded 2-1/2" voice coil and 18.7 mm of XMAX reasonable box size. watts RMS/1,100 watts max • VC DIA : 2-1/2" • Le:
this subwoofer is great for home and automotive Thiele-Small Parameters: • Power handling: 500 3.84 mH • Impedance: 4 ohms • Re: 3.7 ohms
applications in both sealed and vented enclosures. watts RMS/700 watts max • VC DIA: 2-1/2" • Le: • Frequency range: 19-500 Hz • Magnet weight:
Thiele-Small Parameters: • Power handling: 400 3.17 mH • Impedance: 4 ohms • Re: 3.1 ohms 136 oz. • Fs: 20 Hz • SPL: 92 dB 2.83V/1m
watts RMS/565 watts max • VC DIA: 2-1/2" • Le: • Frequency range: 22-500 Hz • Magnet weight: • V AS: 7.79 cu. ft. • Q MS: 5.89 • Q ES: .41 • QTS: .38
3.15 mH • Impedance: 4 ohms • Re: 3.1 ohms 100 oz. • Fs: 22 Hz • SPL: 89 dB 2.83V/1m • X MAX: 20.5 mm • Dimensions: A: 15-9/16", B:
• Frequency range: 28-400 Hz • Magnet weight: 100 • V AS: 2.61 cu. ft. • Q MS: 6.12 • Q ES: .47 • QTS: 14-1/16", C: 8-3/8".
oz. • Fs: 28 Hz • SPL: 88 dB 2.83V/1m • V AS: .95 cu. .44 • XMAX: 18.7 mm • Dimensions: A: 12-1/2", B:
ft. • QMS: 5.23 • Q ES: .42 • Q TS: .39 • XMAX: 18.7 mm 11-1/8", C: 6-1/2".
• Dimensions: A: 10-15/16", B: 9-3/16", C: 6-1/4".
#295-414 . . $179.99 LIST $149.66 (1-3) $139.88 (4-UP) #295-404 . . .$189.99 LIST $159.66 (1-3) $149.88 (4-UP) #295-420. . $239.99 LIST $198.66 (1-3) $189.88 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
177 31/62
7/23/2019 Speacher building.pdf
Speaker Building
Drivers
DVC310-88 12" Dual Voice Coil Subwoofer DVC385-88 15" Dual Voice Coil Subwoofer
Specifications: • Power handling: 350 watts Specifications: • Power handling: 350 watts
RMS per coil, 600 watts total • VC DIA: 2" RMS per coil, 600 watts total • VC DIA:
• Le: 1.81 mH • Impedance: 8 ohm 2" • Le: 1.81 mH • Impedance: 8
per coil/4 ohm total • Re: 2.7 ohms ohm per coil/4 ohm total • Re: 2.6
• Frequency range: 20-450 Hz • Magnet ohms • Frequency range: 20-450
weight: 112 oz. • Fs: 22 Hz • SPL: 87 dB Hz • Magnet weight: 112 oz. • Fs: 20
1W/1m, 90.4 dB 2.83V/1m • VAS: 4.25 cu. Hz • SPL: 90 dB 1W/1m, 93 dB 2.83V/1m
ft. • QMS: 12.53 • Q ES: .38 • QTS: .37 • XMAX: • V AS: 9.92 cu. ft. • Q MS: 12.28 • QES: .39
15.1 mm • Net weight: 18 lbs. • Dimensions: A: • QTS: .38 • X MAX: 15.1 mm • Net weight: 20 lbs.
12-1/4", B: 11", C: 6-3/8", D: 6-1/2". • Dimensions: A: 15-1/8", B: 1 3-7/8", C: 7-3/8",
Note: All specifications are with voice coils connected
D: 6-1/2".
in paral lel. Note: All specifications are with voice coils connected in parallel.
#295- 185 . . . . . . . . . . . . . . . . . $149.99 LIST $115.36 (1-3) $109.87 (4-UP) #295- 190 . . . . . . . . . . . . . . . . . $169.99 LIST $127.60 (1-3) $118.55 (4-UP)
178
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 32/62
7/23/2019 Speacher building.pdf
The Dayton Shielded DVC Series woofers were Speaker Building
designed to offer the maximum performance-
per-dollar. They feature poly coated paper Drivers
cones, wide rubber surrounds, large voice
coils, vented pole pieces, bumped back plates,
and magnetic shielding on the motor structures. The healthy XMAX,
long-throw construction, and dual voice coils make them perfect for
any economical subwoofer system.
• Perform well in sealed or vented enclosures
• Attractive gasket-less design
• Long-life rubber-surround for years of reliable service
• Excellent bottom octave performance
SD215-88 8" Shielded Quatro™ Subwoofers
Designed and built in the USA, the Quatro subwoofers offer
DVC Subwoofer extreme dependability and ruggedness, making them perfect for
Specifications: • Power Handling: 80 watts
home theater or automotive environments. Heavy-gauge 4-layer
RMS/120 watts max • VC DIA: 1.5" • Le: 1.2 mH
• Impedance: 4 ohms • Re: 3.0 ohms • Frequency voice coils, extended back plates, and vented pole pieces provide
range: 30-2,000 Hz • Fs: 28 Hz • SPL: 89 dB 2.83V/1m clean excursion and high power handling. Rubber magnet boots,
• V AS: 1.40 cu. ft. • Q MS: 3.40 • Q ES: .47 • QTS: .41 gold-plated spring terminals (except on 8" model), and a coated
• X MAX: 6 mm • Dimensions: A: 8-1/2", B: 7-1/8", C: 4-1/4". paper cone give a functional yet attractive look. The Quatro
#295- 480 . . . . . . . . . . . . . . . . . . . . $32.99 LIST $24.76 (1-3) $23.58 (4-UP) subwoofers offer excellent overall build quality and performance at
a competitive price.
SD270-88 10" Shielded • Work great in small, sealed enclosures for the automotive environment
DVC Subwoofer • High sensitivity design allows strong output with modest ampliers
Specifications: • Power Handling: 80 watts • Ultra-rugged construction for many years of use
RMS/120 watts max • VCDIA: 1.5" • Le: 1.2
mH • Impedance: 4 ohms • Re: 3.1 ohms
• Frequency range: 30-1,500 Hz • Fs: 25 Hz • SPL: QT210-4 8" Subwoofer
93 dB 2.83V/1m • VAS: 3.90 cu. ft. • QMS: 3.20 • QES:
Perfect for truck cab subwoofers!
.43 • QTS: .38 • XMAX: 6 mm • Dimensions: A: 10-5/8", B:
9", C: 4-3/4" Specifications: • Power Handling: 150 watts
RMS/300 watts max • VCDIA: 1.5" • Le: 2.2
#295- 485 . . . . . . . . . . . . . . . . . . . . $43.99 LIST $33.58 (1-3) $31.98 (4-UP)
mH • Impedance: 4 ohms • Re: 3.9 ohms
• Frequency range: 35-200 Hz • Magnet weight:
SD315-88 12" Shielded 33 oz. • Fs: 36 Hz • SPL: 89 dB 2.83V/1m • V AS: .82 cu. ft. • QMS: 8.2 • QES:
DVC Subwoofer .42 • QTS: .40 • XMAX: 9.5 mm • Dimensions: A: 8-1/4", B: 7-1/4", C: 4".
Specifications: • Power Handling: 120 watts #295- 545 . . . . . . . . . . . . . . . . . $69.99 LIST $53.85 (1-3) $51.28 (4-UP)
RMS/180 watts max • VCDIA: 2" • Le: 1.4
mH • Impedance: 4 ohms • Re: 3.1 ohms
• Frequency range: 30-1,000 Hz • Fs: 25 Hz
• SPL: 94 dB 2.83V/1m • V AS: 5.20 cu. ft. • Q MS: 4.00
QT255-4 10" Subwoofer
• QES: .38 • QTS: .35 • XMAX: 7 mm • Dimensions: A: Specifications: • Power Handling: 200 watts
12-3/8", B: 10-3/4", C: 6". RMS/400 watts max • VC DIA: 2" • Le: 2.0
mH • Impedance: 4 ohms • Re: 3.4 ohms
#295- 490 . . . . . . . . . . . . . . . . . . . . $57.99 LIST $44.28 (1-3) $42.17 (4-UP) • Frequency range: 30-200 Hz • Magnet
Note: All specifications are with voice coils connected in parallel. weight: 44 oz. • Fs: 30 Hz • SPL: 92 dB
2.83V/1m • VAS: 1.84 cu. ft. • Q MS: 8.0 • Q ES:
.31 • Q TS: .30 • X MAX: 8 mm • Dimensions:
Passive Radiators A: 10", B: 9", C: 4-3/4 ".
Designed to match the Shielded DVC #295- 550 . . . . . . . . . . . . . . . . . $95.99 LIST $73.81 (1-3) $70.29 (4-UP)
Series active drivers, these passive
radiators can be used with the active
drivers for new project construction, or as QT305-4 12" Subwoofer
general-purpose replacements in any speaker or Specifications: • Power Handling: 250
subwoofer. A built-in mass disc provides a good starting point for most watts RMS/500 watts max • VC DIA: 2-1/2"
designs, and a convenient M5 threaded hole (screw included) allows the • Le: 2.5 mH • Impedance: 4 ohms • Re:
addition of mass if desired. With poly coated paper cones and wide rubber 3.5 ohms • Frequency range: 25-200
surrounds, the possibilities with these passives are endless, from oor
standing two-ways to small active/passive subwoofer systems. HzSPL:
• • Magnet
94 dB weight:
2.83V/1m56•oz. •: Fs:
V AS 4.2427cu.
Hzft.
SD215-PR 8" Passive Radiator • Q MS: 10.5 • QES: .37 • Q TS: .36 • X MAX:
10 mm • Dimensions: A: 12", B: 11", C: 6".
Specifications: • Fs: 21 Hz • VAS: 1.41 cu. ft. • Q MS: 2.00 • C MS: .75
mm/N • Mms: 75 g • Rms: 5.0 kg/s • Sd: 194 sq. cm. • X MAX: 9 mm #295- 555 . . . . . . . . . . . . . . . . $119.99 LIST $89.67 (1-3) $85.40 (4-UP)
• Dimensions: A: 8-1/2", B: 7-1/8", C: 2-1/4".
#295- 492 . . . . . . . . . . . . . . . . . $18.99 LIST $14.52 (1-3) $13.83 (4-UP) QT385-4 15" Subwoofer
SD270-PR 10" Passive Radiator Amazing as a home theater
Specifications: • Fs: 20 Hz • VAS: 3.88 cu. ft. • QMS: 2.50 • Cms: .67 subwoofer!
mm/N • Mms: 100 g • Rms: 4.89 kg/s • Sd: 340 sq. cm. • XMAX: 10 mm
• Dimensions: A: 10-5/8", B: 9", C: 2-3/4". Specifications: • Power Handling: 300
watts RMS/600 watts max • VC DIA:
#295- 494 . . . . . . . . . . . . . . . . . $26.99 LIST $20.51 (1-3) $19.53 (4-UP) 2-1/2" • Le: 3.5 mH • Impedance: 4
ohms • Re: 3.5 ohms • Frequency
SD315-PR 12" Passive Radiator
range: 20-125 Hz • Magnet weight:
Specifications: • Fs: 17 Hz • VAS: 5.20 cu. ft. • Q MS: 3.00 • Cms: .45 67 oz. • Fs: 21 Hz • SPL: 92 dB
mm/N • Mms: 200 g • Rms: 7.03 kg/s • Sd: 480 sq. cm. • XMAX: 10 mm 2.83V/1m • VAS: 6.60 cu. ft. • Q MS: 14.0 • Q ES: .42 • QTS: .41 • XMAX: 10
• Dimensions: A: 12-3/8", B: 10-3/4", C: 3-3/8". mm • Dimensions: A: 15-1/8", B: 13-7/8", C: 6-5/8".
#295- 496 . . . . . . . . . . . . . . . . . $34.99 LIST $26.34 (1-3) $25.08 (4-UP) #295- 560 . . . . . . . . . . . . . . $139.99 LIST $106.79 (1-3) $101.70 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
179 33/62
7/23/2019 Speacher building.pdf
Speaker Building DC200-8 8" Woofer
Specifications: • Power handling: 60 watts
Drivers RMS/85 watts max • VCDIA: 1-3/8" • Le: 1.60
mH • Impedance: 8 ohms • Re: 6.7 ohms
The Dayton Loudspeaker Classic woofers are • Frequency range: 29-3,000 Hz • Fs: 29
excellent as replacements or for new system Hz • SPL: 88 dB 2.83V/1m • VAS: 2.04 cu. ft.
design and construction. Their versatile set • QMS: 3.23 • QES: .44 • QTS: .38 • XMAX: 4.5 mm
of parameters make them suitable for sealed • Dimensions: A: 8-1/16", B: 7-5/16", C: 3-3/4".
or vented enclosure designs. With impressive #295- 310 . . . . . . . . . . . . . . . . . . . . $29.99 LIST $22.40 (1-3) $21.33 (4-UP)
bass performance and smooth overall response, they are popular in
many DIY loudspeaker projects. DC250-8 10" Woofer
• Treated paper cones provide smooth response and less cone breakup Specifications: • Power handling: 70
• Aluminum formers, vented pole pieces, and porous dustcaps for high power watts RMS/105 watts max • VCDIA: 1-3/8"
handling • Le: 1.60 mH • Impedance: 8 ohms
• Large diameter at spiders and good XMAX for clean bass • Re: 6.7 ohms • Frequency range:
25-2,500 Hz • Fs: 25 Hz • SPL: 89 dB
DC130AS-8 5-1/4" 1W/1m • VAS: 3.50 cu. ft. • QMS: 3.15 • QES:
Shielded Woofer .40 • QTS: .35 • XMAX: 4.5 mm • Dimensions: A:
10-1/16", B: 9-5/16", C: 4-7/16".
Specifications: • Power handling: 30 watts
RMS/45 watts max • VC DIA: 1" • Le: .90 mH #295- 315 . . . . . . . . . . . . . . . . . . . . $30.99 LIST $23.82 (1-3) $22.69 (4-UP)
• Impedance: 8 ohms • Re: 5.9 ohms • Frequency
range: 45-4,000 Hz • Fs: 43.5 Hz • SPL: 88 dB
2.83V/1m • VAS: .61 cu. ft. • QMS: 1.82 • QES: .51 DC300-8 12" Woofer
• QTS: .40 • XMAX: 2.5 mm • Dimensions: Specifications: • Power handling: 80
A: 5-1/4 ", B: 4-3/4", C: 3-1/ 8". watts RMS/115 watts max • VC DIA: 2"
• Le: 1.80 mH • Impedance: 8 ohms
#295-300 . . . . . . . . . . . . . . . . . . . . $25.99 LIST $18.50 (1-3) $16.50 (4-UP)
• Re: 6.6 Hz
28-2,500 ohms • Frequency
• Fs: range:
28 Hz • SPL: 92 dB
DC130BS-8 5-1/4" Round 2.83V/1m • VAS: 5.11 cu. ft. • QMS: 2.94 • QES:
Shielded Woofer .42 • QTS: .37 • XMAX: 4.3 mm • Dimensions: A:
Specifications: • Power handling: 30 watts 12", B: 11", C: 5-1/4".
RMS/45 watts max • VC DIA: 1" • Le: .90 #295- 320 . . . . . . . . . . . . . . . . . . . . $44.99 LIST $33.32 (1-3) $31.73 (4-UP)
mH • Impedance: 8 ohms • Re: 5.9 ohms
• Frequency range: 45-4,000 Hz • Fs: 49 Hz
• SPL: 88 dB 2.83V/1m • VAS: .50 cu. ft. • QMS: DC380-8 15" Woofer
1.80 • QES: .52 • QTS: .40 • XMAX: 2.5 mm Specifications: • Power handling:
• Dimensions: A: 5-11/16", B: 4-3/4", C: 3-1/8". 100 watts RMS/150 watts max
#295- 301 . . . . . . . . . . . . . . . . . . . . . $25.99 LIST $18.50 (1-3) $16.50 (4-UP) • VCDIA: 2" • Le: 3.20 mH
• Impedance: 8 ohms • Re: 6.1
DC130BS-4 5-1/4" Round ohms • Frequency range: 20-1,500 Hz
• Fs: 20 Hz • SPL: 93 dB 2.83V/1m • VAS:
Shielded Woofer 4 Ohm 14.00 cu. ft. • QMS: 3.05 • QES: .33 • QTS: .30
Specifications: • Power handling: 30 watts RMS/45 • XMAX: 4.3 mm • Dimensions: A: 15", B: 14",
watts max • VCDIA: 1" • Le: .60 mH • Impedance: C: 6-3/8".
4 ohms • Re: 3.5 ohms • Frequency range: 45-4,000
#295- 325 . . . . . . . . . . . . . . . . . . . . $79.99 LIST $58.88 (1-3) $56.08 (4-UP)
Hz • Fs: 49 Hz • SPL: 92 dB 2.83V/1m • VAS: .50 cu.
ft. • QMS: 2.00 • QES: .41 • QTS: .34 • XMAX: 2.5 mm
• Dimensions: A: 5-11/16", B: 4-3/4", C: 3-1/8".
Dayton Loudspeaker Classic Subwoofers
#295- 302 . . . . . . . . . . . . . . . . . . . . $25.99 LIST $18.50 (1-3) $16.50 (4-UP) • Heavy-duty treated paper cone for
high stiffness-to-weight ratio
• Aluminum former, large
DC160-8 6-1/2" Woofer 4-layer voice coil, and vented
pole piece for high power
Specifications: • Power handling: 50 watts handling
RMS/75 watts max • VCDIA: 1-3/8" • Le: • Large diameter at spider and
1.40 mH • Impedance: 8 ohms • Re: 6.7 healthy XMAX for clean bass
ohms • Frequency range: DCS380-4 (15"): • Power handling: 250
DIA
33-4,000
87.1 Hz • Fs:
dB 1W/1m • V33 Hz • SPL:
AS: .98
wattsmH
2.30 RMS/350 watts max
• Impedance: • VC • Re:
4 ohms : 2" • Le:
3.1 ohms
cu. ft. • QMS: 2.75 • QES: .37 • Frequency range: 20-500 Hz • Fs: 20 Hz
• QTS: .33 • XMAX: 3.15 mm • Dimensions: A: 6-1/2", B: 5-3/4", C: 3-3/16". • SPL: 92 dB 2.83V/1m • VAS: 9.70 cu. ft. • QMS: 4.00 • QES: .50 • QTS: .44
• XMAX: 8.5 mm • Dimensions: A: 15", B: 14", C: 6-3/8".
#295- 305 . . . . . . . . . . . . . . . . . $26.99 LIST $18.61 (1-3) $17.72 (4-UP)
#295- 470 . . . . . . . . . . . . . . . . . $93.99 LIST $72.00 (1-3) $68.57 (4-UP)
DC160S 6-1/2" Shielded DCS450-4 (18"): • Power
handling: 300 watts
Woofer RMS/450 watts max
DC160S-8: • Power handling: 50 watts • VC DIA: 3" • Le: 2.96
RMS/75 watts max • VC DIA: 1-3/8" • Le: 2.40 mH • Impedance: 4
mH • Impedance: 8 ohms • Re: 7.0 ohms ohms • Re: 3.2 ohms
• Frequency range: 33-4,000 Hz • Fs: 33 Hz • Frequency range: 22-500
• SPL: 86.2 dB 1W/1m • VAS: .78 cu. ft. • QMS: Hz • Fs: 22 Hz • SPL: 94
3.89 • QES: .34 • QTS: .32 • XMAX: 3.15mm dB 2.83V/1m • VAS: 13.77
• Dimensions: A: 6-1/2”, B: 5-3/4”, C: 3-1/2”. cu. ft. • QMS: 6.51 • QES:
DC160S-4: All specications the same except • Le: 1.00 mH • Impedance: 4 .47 • QTS: .44 • XMAX: 8.25
mm • Dimensions: A: 18",
ohms • Re: 3.3 ohms • SPL: 89.0 dB 1W/1m • QMS: 2.80 • QES: .38 • QTS: .33.
B: 17", C: 6-7/8".
#295- 306 (DC 160S-8) #295- 475 . . . . . . . . . . . . . . . $135.99 LIST $104.32 (1-3) $99.35 (4-UP)
#295- 308 (DC 160S-4) . . . . . . . . . . $29.99 LIST $21.60 (1-3) $20.58 (4-UP)
180
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 34/62
7/23/2019 Speacher building.pdf
Speaker Building
Series II Woofers
Drivers
The Dayton Loudspeaker
Series II woofers were
designed to offer a unique Aluminum cone woofers are very
combination of high power popular due to their good looks
handling, healthy XMAX, and good and very solid bass performance.
sensitivity. This allows them The aluminum cone on these
to work well in many different drivers is extremely rigid yet well
applications, including light-duty damped, making the bass and
pro sound or DJ setups and home midbass region very clean and
theater subwoofers. Treated low in distortion. When used with
heavy-duty paper cones, bumped a well-designed crossover, an extremely flat frequency response
(1) High Power Handling
back plates, large motors, rubber can be achieved that is clean well into the midrange region.
(2) XMAX—Long Throw
surrounds, and vented pole pieces
are just a few of the features that (3) Rubber Surround
ensure high power handling and (4) Vented Pole Piece DA135-8 5-1/4" Woofer
long-term reliability. These great (5) Five Year Warranty 5-1/4" aluminum cone woofer with
rubber surround, at spider, and special
woofers have been field-tested
composite dustcap. The cosmetic stamped
and proven for over 10 years, and steel frame will provide a very high-class
continue to gain popularity! and professional look for your next speaker
design. The aluminum cone offers a at
ST210-8 8" Series II Woofer frequency response in the passband region
• Power handling: 180 watts with very low distortion.
RMS/250 watts max • VC DIA: 2” Specifications: • Power handling: 30 watts RMS/50 watts max • VCDIA: 1"
• Le: 1.56 mH • Impedance: • Le: .9 mH • Impedance: 8 ohms • Re: 6.15 ohms • Frequency range:
8 ohms • Re: 7.5 ohms 50-15,000 Hz • Fs: 53 Hz • SPL: 85 dB 1W/1m • V AS: .25 cu. ft. • Q MS: 2.40
• Frequency range: 45-3,000 • Q ES: .57 • QTS: .46 • XMAX: 3 mm • Dimensions: A: 5-5/16", B: 4-1/2",
Hz • Fs: 45 Hz • SPL: 91 dB C: 2-1/2".
2.83V/1m • VAS: 1.34 cu. ft. • QMS:
13.54 • QES: .41 • QTS: .40 • XMAX: 6.4 #295- 330 . . . . . . . . . . . . . . . . . $19.99 LIST $15.08 (1-3) $14.36 (4-UP)
mm • Dimensions: A: 8-3/16", B: 7-3/16",
C: 4".
DA175-8 7" Woofer
#295- 100 . . . . . . . . . . . . . . . . . $68.99 LIST $52.86 (1-3) $50.34 (4-UP) 7" aluminum cone woofer with rubber
surround, at spider, and special
ST255-8 10" Series II Woofer composite dustcap. The cosmetic
• Power handling: 250 stamped steel frame will provide a
watts RMS/350 watts max very high-class and professional look
• VCDIA: 2-1/2" • Le: 1.23 mH for your next speaker design. The
• Impedance: 8 ohms • Re: aluminum cone offers a at frequency
6.2 ohms • Frequency range: response in the passband region with
35-3,000 Hz • Fs: 34 Hz • SPL: 92 very low distortion.
dB 2.83V/1m • VAS: 2.78 cu. ft. • QMS: Specifications: • Power handling: 50 watts RMS/75 watts max • VCDIA:
9.50 • QES: .33 • QTS: .32 • XMAX: 5.5 1-3/8" • Le: 1.15 mH • Impedance: 8 ohms • Re: 5.90 ohms • Frequency
mm • Dimensions: A: 10", B: 9", range: 35-10,000 Hz • Fs: 36 Hz • SPL: 85 dB 1W/1m • VAS: .75 cu. ft.
C: 4-3/4". • Q MS: 2.15 • QES: .53 • Q TS: .42 • X MAX: 4.25 mm • Dimensions: A:
#295- 110 . . . . . . . . . . . . . . . . . $84.99 LIST $64.90 (1-3) $61.49 (4-UP) 6-15/16", B: 5-5/8", C: 3".
#295- 335 . . . . . . . . . . . . . . . . . $26.99 LIST $20.56 (1-3) $19.58 (4-UP)
ST305-8 12" Series II Woofer
• Power handling: 275
watts RMS/380 watts max
• VC DIA: 2-1/2" • Le: 2.30
PT2C-8 Planar Tweeter
mH • Impedance: 8 ohms
• Re: 5.7 ohms • Frequency • Perfect for multi-driver or line array applications
range: 27-2,000 Hz • Fs: • When used in multiples, can handle crossover
27 Hz • SPL: 92 dB 2.83V/1m points as low as 2k
• VAS: 5.70 cu. ft. • QMS: 11.72 • Excellent for home theater or other xed-
• QES: .35 • QTS: .34 • XMAX: 8.0 mm listening-position applications
• Dimensions: A: 12", B: 11", C: 6". A pl anar twe eter ’s d iaph ragm consi sts of
finely etched aluminum conductors attached
#295- 120 . . . . . . . . . . . . . . . . . $99.99 LIST $77.54 (1-3) $73.85 (4-UP) to a thin Kapton film. This film is suspended
between many rows of neodymium magnets,
ST385-8 15" Series II Woofer and is excited directly by the audio signal.
• Power handling: By having a very large yet lightweight voice
300 watts RMS/425 coil that actually is the radiating membrane,
watts max • VCDIA: planar tweeters can reproduce music with
2-1/2" • Le: 4.4 great immediacy, detail, and transparency.
mH • Impedance: The tall, slim design naturally produces a very
8 ohms • Re: 6.3 narrow vertical and wide horizontal dispersion
ohms • Frequency range: pattern, which can help eliminate room
19-1,000 Hz • Fs: 19 Hz • SPL: interactions from the floor and ceiling while
90 dB 2.83V/1m • VAS: 9.64 cu. ft. producing a very wide horizontal soundfield.
• QMS: 10.46 • QES: .35 • QTS: .34 Specifications: • Power handling: 80 watts
• XMAX: 8.0 mm • Dimensions: RMS/115 watts max • Impedance: 8 ohms • Re: 7.6 ohms • Frequency range:
A: 15-1 /8", B: 13-7/8", C: 6-9/1 6". 2,000-26,000 Hz • SPL: 94 dB 2.83V/1m • Dimensions: A: 6-5/8" x 3-1/2", B:
6-1/4" x 2-5/8, C: 7/8".
#295- 130 . . . . . . . . . . . . . . . . $129.99 LIST $99.87 (1-3) $95.87 (4-UP)
#275- 085 . . . . . . . . . . . . . . . . . . . . . $59.99 LIST $39.34 (1-3) $36.57 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
181 35/62
7/23/2019 Speacher building.pdf
Speaker Building The Dayton Loudspeaker Classic tweeters and midranges are
outstanding all-around drivers suitable for retrofitting or for new
Drivers designs. Utilizing the most popular dome materials found in the
industry and available in shielded and non-shielded versions, you will
find a tweeter for just about every application. All feature ferrofluid in
Don’t let the low price fool you!
the magnetic gap for good damping of the resonance peak and high
These versatile tweeters are a huge
power handling, and offer excellent overall value.
step above the average “budget”
tweeter. Conceived with line array
thoughts in mind, it is finally
DC25T-8 1" Titanium Dome Tweeter
• Rubber surround and phase shield reduce
possible to achieve the inter- dome breakup and improve off-axis response
driver spacing needed to minimize
comb filtering out to nearly 20 kHz. But their uses don’t stop at • Titanium dome produces very crisp and clear
high frequencies
line arrays —they have the sensitivity, smoothness, and power Specifications: • Power handling: 50 watts
handling to individually do a two-way with most small woofers. RMS/75 watts max • VC DIA: 1" • Impedance: 8
Give them a try for your next budget or micro speaker—you will ohms • Re: 7.2 ohms • Frequency range: 3,000-
be pleasantly surprised! 20,000 Hz • Fs: 1,500 Hz • SPL: 93 dB 2.83V/1m
• Dimensions: A: 3-7/8", B: 2-7/8", C: 1".
Dayton Loudspeaker Neodymium #275- 045 . . . . . . . . . . . . . . . . . . . . . $ 2 0 . 9 9 LIST $15.66 (1-3) $14.91 (4-UP)
Tweeters
• Compact neodymium motors have low stray eld
DC25TS-8 1" Shielded
• Ferrouid enhances power handling and helps damp resonance Titanium Dome Tweeter
• Rubber surround and phase shield reduce
ND28F-4 1-1/8" Neodymium dome breakup and improve off-axis response
Dome Tweeter • Titanium dome produces very crisp and clear
high frequencies
•Rear-mount design minimizes housing size
•Center-to-center spacing as low as 2-1/2” • Shielded design allows use near CRT monitors
•Great top-end air and sparkle Specifications: • Power handling: 50 watts
RMS/75 watts max • VCDIA: 1" • Impedance: 8 ohms • Re: 7.2 ohms
Specifications: • Power handling: 30 watts • Frequency range: 3,000-20,000 Hz • Fs: 1,500 Hz • SPL: 93 dB 2.83V/1m
RMS/60 watts max • VCdia: 1” • Impedance: • Dimensions: A: 3-7/8", B: 2-7/8", C: 1-1/2".
6 ohms • Re: 5.4 ohms • Frequency range:
2,200 - 20,000 Hz • Fs: 1,100 Hz • SPL: 91 #275- 055 . . . . . . . . . . . . . . . . . . . . .$22.99 LIST $17.63 (1-3) $16.79 (4-UP)
dB 2.83V/1m • Dimensions: A: 2-1/2”, B: 1-3/4”, C: 1-1/8”.
#275- 040 . . . . . . . . . . . . . . . . . . $ 2 9 . 9 9 LIST $18.60 (1-3) $15.75 (4-UP)
DC28F-8 1-1/8" Silk Dome Tweeter
• Damped rear chamber makes low crossover
points possible
ND16FA-6 5/8" Neodymium • Treated silk dome offers smooth response with
airy highs
Dome Tweeter
• Matches or exceeds the performance of many
• Unique front presst, ush-mount design high-dollar tweeters
• Center-to-center spacing as low as 1-3/8" • Extremely popular for DIY projects; used in
• Extended response with superior off-axis many designs
dispersion
• Compact neodymium motor is effectively self- Specifications: • Power handling: 50 watts RMS/75 watts max • VCDIA: 1-1/8"
shielded • Impedance: 8 ohms • Re: 5.4 ohms • Frequency range: 2,000-20,000 Hz
• Fs: 900 Hz • SPL: 89 dB 2.83V/1m • Dimensions: A: 4-5/16", B: 3-1/8",
Specifications: • Power handling: 10 watts C: 1-1/8".
RMS/20 watts max • VC DIA: 5/8" • Impedance: 6
ohms • Re: 5.0 ohms • Frequency range: 3,500-27,000 Hz • Fs: 2,200 Hz #275- 070 . . . . . . . . . . . . . . . . . . . . .$19.99 LIST $15.50 (1-3) $13.88 (4-UP)
• SPL: 90 dB 2.83V/1m • Dimensions: A: 1-1/4", B: 1-1/4", C: 5/8".
#275- 025 . . . . . . . . . . . . . . . . . . . . . $7.99 LIST $5.88 (1-3) $4.90 (4-UP) DC28FS-8 1-1/8" Shielded
Silk Dome Tweeter
ND20FA-6 3/4" Neodymium Dome Tweeter • Damped rear chamber makes low crossover
points possible
• Front-mount presst design
• Treated silk dome offers smooth response with
• Center-to-center spacing as low as 1-3/4" airy highs
• Extremely at and extended response • Matches or exceeds the performance of many
Specifications: • Power handling: 15 high-dollar tweeters
watts
• RMS/30 watts
Impedance: 6 ohmsmax • VC
• Re:
DIA : 3/4"
5.2 ohms • Shielded
• Extremelydesign
popular for DIY
allows projects;
use near CRTused in many designs
monitors
• Frequency range: 3,500-25,000 Hz • Fs: 1,800 Specifications: • Power handling: 50 watts RMS/75 watts max • VCDIA: 1-1/8"
Hz • SPL: 92 dB 2.83V/1m • Dimensions: A: 1-3/4", • Impedance: 8 ohms • Re: 5.4 ohms • Frequency range: 2,000-20,000 Hz • Fs:
B: 1-5/16", C: 3/4". 900 Hz • SPL: 89 dB 2.83V/1m • Dimensions: A: 4-5/16", B: 3-1/8", C: 1-1/2".
#275- 030 . . . . . . . . . . . . . . . . . . . . .$7.99 LIST $5.88 (1-3) $4.90 (4-UP) #275- 075 . . . . . . . . . . . . . . . . . . . . .$21.99 LIST $16.75 (1-3) $15.64 (4-UP)
3,500-25,000 Hz • Fs: 1,700 Hz • SPL: 93 dB 2.83V/1m • Dimensions: A: • Re: 4.2 ohms • Frequency range: 500-6,000 Hz • Fs: 350 Hz • SPL: 90 dB
1-9/16", B: 1-1/2" x 1-1/2", C: 1/2". 2.83V/1m • Dimensions: A: 5-3/4", B: 4-1/2", C: 2-3/4".
#275- 035 . . . . . . . . . . . . . . . . . . . . $7.99 LIST $5.88 (1-3) $4.90 (4-UP) #285- 010 . . . . . . . . . . . . . . . . . $39.99 LIST $31.96 (1-3) $30.44 (4-UP)
182
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 36/62
7/23/2019 Speacher building.pdf
Goldwood Silver Poly Woofers Speaker Building
These silver polymer cone woofers
feature a cosmetic stamped Drivers
steel frame, vented and
bumped back plate,
and a high-quality rubber Dynavox ® is the best kept secret in high
surround. The relatively shallow end loudspeaker drivers. They were
prole, polymer construction, and engineered in France and their motor
T/S parameters make them great #290- 301 structures were optimized using Finite
for automotive environments. Element Analysis techniques. The mid-bass drivers feature die
cast frames, butyl rubber surrounds, one piece polypropylene
5-1/4" Silver Poly Woofer #290- 308
cones and huge voice coils. The unique motor structure uses
#290-301: • Power handling: 70 watts RMS/130 watts max • VCDIA: 1" • Le: magnets located inside the underhung voice coil. The result
.30 mH • Impedance: 4 ohms • Re: 3.6 ohms • Frequency range: 50-5,500
is a v ast improvement in driver linearity and a reduction in
Hz• Fs: 72 Hz • SPL: 87 dB 2.83V/1m • VAS: .15 cu. ft. • Q MS: 3.79 • Q ES: 1.14
• Q TS: .88 • XMAX: 2.0 mm • Dimensions: A: 5-5/8", B: 4-5/8", C: 2-1/4".
harmonic distortions.
#290-302: All specications the same except: • Le: .40 mH • Impedance: 8 TD2801XL 1-1/8" Silk Dome Tweeter
ohms • Re: 7.0 ohms • Fs: 81 Hz • SPL: 85 dB 1W/1m • VAS: .13 cu. ft. • Q MS: This tweeter features a 1-1/8" treated silk dome,
2.87 • Q ES: 1.18 • QTS: .84. ferrouid cooled for higher power handling and
#290- 301 (GW-S525/4 4ohm) a heavy cast aluminum faceplate. It also utilizes
a specially dampened rear chamber for a lower
#290- 302 (GW-S525/8 8ohm) . . . . . . . . . . . . . . . . . . $9.50 (1-3) $8.25 (4-UP)
resonanant frequency and crossover point. It offers
exceptional clarity and smoothness, even at high
6 1/2" Silver Poly Woofer output levels!
#290-308: • Power handling: 80 watts RMS/170 watts max • VCDIA: 1" • Le: Specifications: • Power handling: 100 watts RMS/150 watts max • VCDIA:
.3 mH • Impedance: 4 ohms • Re: 3.7 ohms • Frequency response: 35-5,000 1-1/8" • Impedance: 8 ohms • Re: 5.3 ohms • Frequency range: 2,000-
Hz • Fs: 55 Hz • SPL: 90 dB 2.83V/1m • V AS: .50 cu. ft. • Q MS: 3.60 • Q ES: .87 22,000 Hz • Magnet weight: 8 oz. • Fs: 1000 Hz • SPL: 92 dB 1W/1m
• Q TS: .71 • XMAX: 2.5 mm • Dimensions: A: 7", B: 5-7/8", C: 2-3/4". • Dimensions: A: 4-3/8", B: 3-3/8", C: 1-5/8".
#290-309: All specications the same except: • Le: .4 mH • Impedance: 8 #275- 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $38.60 (1-3) $32.50 (4-UP)
ohms • Re: 7.0 ohms • SPL: 86 dB 1W/1m • Q ES: 1.09 • Q TS: .83.
#290- 308 (GW-S650/4 4 ohm) LW5004PMR 5-1/4" Mid-Bass Driver
#290- 309 (GW-S650/8 8 ohm) . . . . . . . . . . . . . . . . $12.88 (1-3) $11.25 (4-UP) Specifications: • Power handling: 100 watts
RMS/150 watts max • VCDIA: 3" • Le: .72
mH • Impedance: 8 ohms • Re: 5.2 ohms
• Frequency range: 50-5,000 Hz • Magnet
Goldwood Newport Series weight: 20 oz. • Fs: 50.68 Hz • SPL: 85.21 dB
Professional Drivers 1W/1m • VAS: .26 cu. ft. • Q MS: 2.42 • QES: .7
The Newport Series drivers of low frequency • Q TS: .54 • XMAX: 3 mm • Dimensions: A: 5-3/4",
transducers are designed for professional B: 5", C: 2-7/8"
applications utilizing an efcient
magnet structure. They also #295- 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $65.80 (1-3) $58.30 (4-UP)
feature large edgewound LW6004PMR 6-1/2" Woofer
#290 -290
voice coils, cast aluminum
frames, vented pole piece Specifications: • Power handling: 140 watts
and gold plated terminals. RMS/200 watts max • VC DIA: 3" • Le: .69
mH • Impedance: 8 ohms • Re: 5.2 ohms
#290- 296 • Frequency range: 45-5,000 Hz • Magnet
weight: 20 oz. • Fs: 45.57 Hz • SPL: 87 dB
GW-10090 10" Woofer 1W/1m • VAS: .58 cu. ft. • Q MS: 2.69 • Q ES:
Specications: • Power handling: 300 watts RMS/600 watts max • VCdia: .76 • Q TS: .59 • X MAX: 3 mm • Dimensions: A:
3" • Le: 1.4 mH • Impedance: 8 ohms • Re: 5.2 ohms • Frequency range: 6-7/8", B: 5-3/8", C: 3-1/16".
40-4,000 Hz • Fs: 41 Hz • SPL: 95.4 dB 2.83V/1m • Vas: 1.89 cu. ft. • Xmax:
#295- 605 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $69.80 (1-3) $65.50 (4-UP)
5.4mm• Qms: 6.78 • Qes: .26 • Qts: .25 • Dimensions: A: 10-1/4", B: 9-3/8",
C: 4-1/4". LW8004PMR 8" Woofer
#290- 290 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $67.00 (1-3) $58.33 (4-UP)
Specifications: • Power handling: 150
watts RMS/200 watts max • VC DIA: 4"
GW-12090 12" Woofer • Le: 1.23 mH • Impedance: 8 ohms
Specications: • Power handling: 400 watts RMS/800 watts max • VCdia: • Re: 5.2 ohms • Frequency range:
4" • Le: 2.5 mH • Impedance: 8 ohms • Re: 7.13 ohms • Frequency range: 45-5,000 Hz • Fs: 45 Hz • SPL: 88 dB
40-3,000 Hz • Fs: 48.5 Hz • SPL: 94.3 dB 2.83V/1m • Vas: 1.76 cu. ft. • Xmax: 1W/1m • VAS: 1.03 cu. ft. • QMS: 3.69
5.4mm• Qms: 8.36 • Qes: .36 • Qts: .35 • Dimensions: A: 12-1/4", B: 11", C: • QES: .79 • QTS: .65 • XMAX: 3.4 mm
4-3/4". • Dimensions: A: 9-5/8", B: 7-3/4 “, C:
#290- 292 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $97.80 (1-3) $83.47 (4-UP) 3-1/2".
#295-610 . . . . . . . . . . . . . . . . . . . . . . . . . . . $107.93 (1-3) $98.93 (4-UP)
GW-15090 15" Woofer
Specications: • Power handling: 400 watts RMS/800 watts max • VCdia: Speaker Mounting Screws
4" • Le: 2.6 mH • Impedance: 8 ohms • Re: 7.2 ohms • Frequency range:
25-2,000 Hz • Fs: 44.7 Hz • SPL: 96.1 dB 2.83V/1m • Vas: 4.41 cu. ft. • Xmax: These sharp point, black oxide, Phillips pan head screws with
5.4mm• Qms: 18.12 • Qes: .47 • Qts: .46 • Dimensions: A: 15-1/8", B: coarse/deep threads are ideal for use with wood and MDF. Perfect for speaker
14-1/4", C: 6". building and driver mounting. The #6 size is especially suited for smaller items such
as some midranges, tweeters, terminal cups and port tubes. 100 pcs. per package.
#290- 294 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $119.65 (1-3) $98.67 (4-UP)
Price Per Pkg.
GW-18090 18" Woofer Part # Description Size (1-9) (10-UP)
081-435 Deep thread pan head #6 x 3/4" $2.90 $2.45
Specications:
4" • Le: 2.8 mH••Power handling:
Impedance: 500 watts
8 ohms • Re: RMS/1,000
7.2 ohms •watts max •range:
Frequency VCdia: 081-440 Deep thread pan head #6 x 1" 3.10 2.68
081-420 Deep thread pan head #8 x 1/2" 2.00 1.82
20-1,500 Hz • Fs: 29.2 Hz • SPL: 95.2 dB 2.83V/1m • Vas: 13.61 cu. ft.
081-422 Deep thread pan head #8 x 3/4" 2.25 1.98
• Xmax: 5.4mm• Qms: 10.33 • Qes: .49 • Qts: .48 • Dimensions: A: 18-1/4",
081-425 Deep thread pan head #8 x 1" 2.35 2.15
B: 16-3/4", C: 7-1/2". 081-430 Deep thread pan head #8 x 1-1/2" 2.60 2.18
#290- 296 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.87 (1-3) $115.65 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
183 37/62
7/23/2019 Speacher building.pdf
Speaker Building Mylar Tweeter with Acoustic Lens
• Available shielded or non-shielded
Drivers • Ferrouid cooled
Specifications: • Power handling: 30 watts RMS/45 watts
Goldwood™ Sound has been a key max • VCDIA: 1/2" • Fs: 2,600 Hz • SPL: 90 dB 1W/1m
player in the U.S. speaker industry for • Dimensions: A: 2-3/8" x 2-3/8", B: 1-15/16", C: 7/8".
many years. Their expertise in importing #270- 170 (4 ohm GT302) . . . . . . . . . . . . . . . . . . . . . . $2.06 (1-3) $1.90 (4-UP)
speaker components allows them to #270- 175 (8 ohm GT302/S) . . . . . . . . . . . . . . . . . . . . . $2.30 (1-3) $1.95 (4-UP)
find great overseas products and bring
them to the U.S. at very affordable 4" Cone Tweeter
prices. There are many “hidden gems” in the Goldwood line that can
This tweeter blends well with the cone midrange
fit many unique price and performance criterion. #280-012. It features a hard paper cone, treated
paper surround, and black aluminum dust cap.
1" Titanium Dome Tweeters Flat high frequency response to 20,000 Hz.
Specifications: • Power handling: 35 watts RMS/50 watts max • Impedance:
8 ohms • Fs: 1,500 Hz • Frequency response: 3,000-20,000 Hz • SPL: 90 dB
1W/1m • Dimensions: A: 4", B: 3", C: 1-1/16" • Mfg. #GT-25.
#270- 160
#270- 018 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.90 (1-3) $3.50 (4-UP)
#270- 150
5" Cone Midrange
Great general-purpose 5" sealed back midrange
driver. Features a paper cone, treated paper
surround, and black aluminum dust cap. Offers a
#270- 155 #270- 165 smooth and extended response, and mates well
with cone tweeter #270-018.
Choose the faceplate design that best suits your application. All of these Specifications: • Power handling: 35 watts RMS/50 watts max • Impedance:
tweeters feature a 1" pure titanium dome with a phase shield to provide a 8 ohms • Fs: 800 Hz • Frequency response: 1,500-10,000 Hz • SPL: 90 dB
controlled high frequency roll off. 1W/1m • Dimensions: A: 5-1/8", B: 4-1/16", C: 1-5/8" • Mfg. #GM-35.
Specifications: • Power handling: 45 watts RMS/65 watts max • VCDIA: 1" #280- 012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4.50 (1-3) $3.90 (4-UP)
• Impedance: 8 ohms • Re: 6.8 ohms • Frequency response: 3,500-20,000 Hz
• Fs: 1,500 Hz • SPL: 90 dB 1W/1m
4" Rubber Surround
Faceplate Cutou t Price Price Shielded Woofer
Part # Dimensions Dimensions (1-3) (4-UP)
• Power handling: 40 watts RMS/70 watts max • VC DIA:
270-150 3-3/4" x 3-3/4" 3-1/8" $6.95 $6.36
1" • Le: .23 mH • Impedance: 8 ohms • Re: 7.1 ohms
270-155 3-7/8" round 3-1/8" 6.95 6.36
270-160 7.20 6.55
• Frequency range: 80-6,000 Hz • Fs: 83 Hz • SPL: 84
4-1/2" x 3-1/2" 3-1/8"
270-165 5-1/2" x 3-1/2" 3-1/8" 7.70 7.00 dB 2.83V/1m • V AS: .07 cu. ft. • X MAX: 1.5 mm • Q MS: 2.40
• Q ES: .97 • QTS: .69 • Dimensions: A: 4-3/8", B: 3-3/4",
C: 2-3/4" • Mfg. #GW-4028/S.
#290- 373 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.90 (1-3) $7.43 (4-UP)
1" Soft Dome Tweeters
• Silk dome 5-1/4" Rubber Surround
• High power handling
Shielded Woofer
Specifications: • Power handling: • Power handling: 70 watts RMS/100 watts max • VCDIA:
50 watts RMS/100 watts max 1" • Le: .25 mH • Impedance: 8 ohms • Re: 7.0 ohms
• VC DIA: 1" • Impedance: 8 ohms • Frequency range: 80-4,000 Hz • Fs: 80 Hz • SPL: 85
• Fs: 1,300 Hz • Frequency #270- 176 #270- 178 dB 2.83V/1m • VAS: .15 cu. ft. • X MAX: 2.0 mm
response: 3,000 - 20,000 • QMS: 3.90 • QES: 1.17 • QTS: .90 • Dimensions: A:
Hz • SPL: 90 dB 1W/1m 5-3/8", B: 4-1/2", C: 2-3/4" • Mfg. #GW-5028/ S.
• Dimensions: A: 4", B: 2-7/8, C: 1-1/4" GT510, 1-3/4" GT510/S.
#290- 377 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.90 (1-3) $9.31 (4-UP)
#270- 176 (GT510) . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.90 (1-3) $7.90 (4-UP)
#270- 178 (GT510/S Shielded) . . . . . . . . . . . . . . . . . . . $9.50 (1-3) $8.92 (4-UP) 5" Sealed Back Midrange
Sealed back midrange eliminates need for a
separate midrange enclosure. Features treated
1" Shielded Soft Dome Horn Tweeter
• Silk dome
paper cone, paper surround, and steel mesh grill.
Available in 4 and 8 ohm im pedance.
• High power handling
Specifications: • Power handling: 40 watts RMS/55 watts
• Efcient horn loaded design
max • VC DIA: 1" • Frequency response: 800-8,000 Hz • Fs: 470 Hz • SPL: 89
Specifications: • Power handling: 50 watts RMS/100 dB 1W/1m • Dimensions: A: 5-1/8", B: 4-1/8", C: 2-1/2".
watts max • VCdia: 1" • Impedance: 8 ohms • Fs:
1,000 Hz • Frequency response: 2,000 - 20,000 Hz • SPL: 92 dB 1W/1m #280- 100 (4 ohm GM-65/4)
• Dimensions: A: 4", B: 2-7/8", C: 1-1/8" Mfg. #GT-525. #280- 105 (8 ohm GM-65/8). . . . . . . . . . . . . . . . . . . . . $5.62 (1-3) $4.88 (4-UP)
#270- 182 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.50 (1-3) $8.92 (4-UP)
5" Sealed Back Midrange
Sealed back midrange eliminates need for a
1" Shielded Soft Dome Horn Tweeter separate midrange enclosure. Features poly-mica
• Silk dome cone, treated foam surround, and aluminum voice
• High power handling coil for higher power handling. Available in 4 and 8
ohm varieties.
• Efcient horn loaded design
Specifications: • Power handling: 50 watts RMS/100 watts Specifications: • Power handling: 40 watts RMS/55
watts max • VC DIA: 1" • Frequency response: 800-8,000 Hz • Fs: 470 Hz • SPL:
max • VCDIA: 1" • Impedance: 8 ohms • Fs: 1,000 Hz
89 dB 1W/1m • Dimensions: A: 5-1/8", B: 4-1/8", C: 2-1/2".
• Frequency response: 2,000 - 20,000 Hz • SPL: 92 dB
1W/1m • Dimensions: A: 4-1/2", B: 3-1/4", C: 2" Mfg. #GT-520. #280- 110 (4 ohm GM-85/4)
#270- 180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.70 (1-3) $8.98 (4-UP) #280- 115 (8 ohm GM-85/8). . . . . . . . . . . . . . . . . . . . . $7.25 (1-3) $6.50 (4-UP)
184
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 38/62
7/23/2019 Speacher building.pdf
Pismo Series Speaker Building
These low frequency drivers are ideal for the Drivers
customer who is looking for an inexpensive
replacement woofer. Each woofer features a
12" Woofer
treated paper ribbed cone, vented pole piece,
moisture resistant poly foam surround, and stamped steel frame. #290-330: • Power handling: 120 watts
RMS/240 watts max • VC DIA: 1-1/2" • Le: .5
mH • Impedance: 4 ohms • Re: 3.6 ohms
4" Shielded Woofer • Frequency range: 35-1,500 Hz • Fs: 38
Hz • SPL: 90.4 dB 2.83V/1m • V AS: 3.59 cu. ft.
#290-370: • Power handling: 40 watts RMS/70 watts max • QMS: 5.27 • QES: 1.43 • QTS: 1.17 • XMAX: 3.5 mm
• VC DIA: 1" • Le: .1 mH • Impedance: 4 ohms • Re: 3.7 • Dimensions: A: 12", B: 11", C: 5-1/8".
ohms • Frequency range: 100-10,000 Hz • Fs: 138 Hz #290-335: All specs the same except: • Le: .6 mH • Impedance: 8 ohms • Re:
• SPL: 86 dB 2.83V/1m • V AS: .035 cu. ft. • X MAX: 1.5 mm
7.0 ohms • SPL: 87 dB 2.83V/1m • Q ES: 1.98 • QTS: 1.44.
• Q MS: 7.19 • QES: 2.20 • Q TS: 1.69 • Dimensions: A: 4-1/2",
B: 4", C: 2-9/16". #290- 330 (4 ohm GW-212/4)
#290-372: All specications the same except: • Le: .2 mH • Impedance: 8 #290- 335 (8 ohm GW-212/8) . . . . . . . . . . . . . . . . . .$18.95 (1-3) $17.27 (4-UP)
ohms • Re: 7.3 ohms • SPL: 84 dB 2.83V/1m • Q MS: 6.81 • QES: 2.02
• Q TS: 1.56. 15" Woofer
• Power handling: 150 watts RMS/300
#290- 370 (4 ohm GW-204/4S)
watts max • VC DIA: 1-1/2" • Le: .93 mH
#290- 372 (8 ohm GW-204/8S) . . . . . . . . . . . . . . . . . . . $7.20 (1-3) $6.50 (4-UP) • Impedance: 8 ohms • Re: 7.2 ohms
• Frequency range: 20-2,500 Hz • Fs:
5-1/4" Shielded Woofer 29 Hz • SPL: 90 dB 2.83V/1m • VAS: 9.69 cu. ft.
• QMS: 5.07 • QES: 1.29 • QTS: 1.03 • XMAX: 3.5 mm
#290-374: • Power handling: 70 watts RMS/130 watts • Dimensions: A: 15", B: 13-3/4", C: 5-1/2" Mfg. #GW-215/40/8.
max • VCDIA: 1" • Le: .2 mH • Impedance: 4 ohms
• Re: 3.6 ohms • Frequency range: 80-6,000 Hz • Fs: #290- 346 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.95 (1-3) $32.36 (4-UP)
85 Hz • SPL: 90 dB 2.83V/1m • V AS: .18 cu. ft. • X MAX: 2.0
mm • QMS: 3.18 • QES: .87 • Q TS: .68 • Dimensions:
Balboa Series
A: 5-1/4 ", B: 4-3/4", C: 3-1/8 ".
These woofers provide added versatility over single voice coil
#290-376: All specications the same except: • Le: .4 mH • Impedance: 8 ohms woofers by allowing the use of both channels of a stereo amplifier to
• Re: 7.1 ohms • SPL: 87 dB 2.83V/1m • Q MS: 3.18 • QES: 1.10 • QTS: .81.
drive one speaker, and the ability to wire the voice coils in varying
#290- 374 (4 ohm GW-205/4S) configurations. They feature polymer laminated paper cones, treated
#290- 376 (8 ohm GW-205/8S) . . . . . . . . . . . . . . . . . . . $8.50 (1-3) $7.80 (4-UP) foam surrounds, and vented pole pieces with bumped back plates. The
6-1/2" woofer features a fully shielded motor! Note: Specifications
listed are with voice coils connected in parallel.
6-1/2" Woofer
#290-300: • Power handling: 90 watts
GW-406D 6-1/2" Shielded
RMS/180 watts max • VC DIA: 1-1/2" • Le: .4 DVC Subwoofer
mH • Impedance: 4 ohms • Re: 3.7 ohms • Power handling: 70 watts RMS/120 watts
• Frequency range: 60-3,000 Hz • Fs: 60 Hz • SPL: max • VCDIA: 1" • Le: .4 mH • Impedance:
91 dB 2.83V/1m • VAS: .42 cu. ft. • QMS: 3.50 • QES:
.73 • Q TS: .61 • X MAX: 3.5 mm • Dimensions: A: 6-1/2", 4 ohms • Re: 3.5 ohms • Frequency range:
59-7,000 Hz • Fs: 50 Hz • SPL: 91.3 dB
B: 5-5/8", C: 3-5/16". 2.83V/1m • VAS: .47 cu. ft. • Q MS: 4.13 • Q ES:
#290-305: All specs the same except: • Le: .5 mH • Impedance: 8 ohms • Re: .75 • Q TS: .63 • X MAX: 2 mm • Dimensions:
7.1 ohms • SPL: 87 dB 1W/1m • Q ES: 97 • QTS: .75. A: 6-1/2 ", B: 5-5/8", C: 3-5/1 6".
#290- 300 (4 ohm GW-206/4) #290- 352 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.70 (1-3) $9.60 (4-UP)
#290- 305 (8 ohm GW-206/8) . . . . . . . . . . . . . . . . . $11.70 (1-3) $10.65 (4-UP) GW-408D 8" DVC Subwoofer
• Power handling: 100 watts RMS/220
8" Woofer watts max • VC DIA: 1-1/2" • Le: .5 mH
• Impedance: 4 ohms • Re: 3.7 ohms
#290-310: • Power handling: 100 watts • Frequency range: 44-3,000 Hz • Fs: 51
RMS/200 watts max • VC DIA: 1-1/2" • Le: .4 Hz • SPL: 91 dB 2.83V/1m • V AS: .73 cu. ft.
mH • Impedance: 4 ohms • Re: 3.7 ohms • Q MS: 4.46 • QES: .75 • Q TS: .64 • X MAX: 3.5
• Frequency response: 55-2,500 Hz • Fs: mm • Dimensions: A: 8", B: 7-1/8", C: 3-5/8".
53 Hz • SPL: 90.8 dB 2.83V/1m • V AS: .80 cu. ft.
MS ES TS MAX (1-3) (4-UP)
• Dimensions:
• Q : 4.05 • QA: 8",
: .85
B:•7-1/8",
Q : .70C: • X : 3.5 mm
3-11/16". #290- 357 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $16.25 $14.50
GW-410D 10" DVC Subwoofer
#290-315: All specs the same except: • Le: .6 mH • Impedance: 8 ohms • Re:
• Power handling: 110 watts RMS/220
7.3 ohms • SPL: 88 dB 1W/1m • Q ES: 1.09 • QTS: .86.
watts max • VCDIA: 1-1/2" • Le: .3 mH
#290- 310 (4 ohm GW-208/4) • Impedance: 3 ohms • Re: 1.8 ohms
#290- 315 (8 ohm GW-208/8) . . . . . . . . . . . . . . . . . .$12.95 (1-3) $11.55 (4-UP) • Frequency range: 41-2,000 Hz • Fs: 40
Hz • SPL: 96 dB 2.83V/1m • VAS: 2.00 cu.
ft. • QMS: 6.17 • QES: .68 • QTS: .61 • X MAX: 3.0
10" Woofer mm • Dimensions: A: 10", B: 9-1/8",C: 4-1/2".
#290-320: • Power handling: 110 watts #290- 362 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.50 (1-3) $17.50 (4-UP)
RMS/ 220 watts max • VC DIA: 1-1/2" • Le: GW-412D 12" DVC Subwoofer
.4 mH • Impedance: 4 ohms • Re: 3.8
ohms • Frequency range: 40-2,200 Hz • Fs: • Power handling: 130 watts RMS/260
41 Hz • SPL: 90.6 dB 2.83V/1m • V AS: 2.19 cu. ft. watts max • VC DIA: 1-1/2" • Le: .5 mH
• Q MS: 4.46 • QES: 1.66 • Q TS: 1.21 • X MAX: 3.5 mm • Impedance: 4 ohms • Re: 3.4 ohms
• Frequency range: 33-1,500 Hz • Fs: 38
• Dimensions: A: 10", B: 9-1/8", C: 4-3/8". Hz • SPL: 94 dB 2.83V/1m • V AS: 3.83 cu.
#290-325: All specs the same except: • Le: .5 mH • Impedance: 8 ohms ft. • QMS: 5.76 • Q ES: .83 • Q TS: .73 • XMAX: 3.5
• Re: 7.1 ohms • SPL: 86 dB 1W/1m • Q ES: 1.60 • Q TS: 1.19. mm • Dimensions: A: 12", B: 11", C: 5-3/16".
#290- 320 (4 ohm GW-210/4) #290- 367 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $28.95 (1-3) $25.80 (4-UP)
#290- 325 (8 ohm GW-210/8) . . . . . . . . . . . . . . . . . .$15.95 (1-3) $14.09 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
185 39/62
7/23/2019 Speacher building.pdf
Speaker Building Delmar Series
The Delmar Series was designed for small, sealed enclosures
Drivers
and is available in 4 ohm and 8 ohm versions for automotive and
home audio applications. The woofers handle the most powerful of
Malibu Series amplifiers while maintaining sonic excellence. They feature aluminum
die-cast frames, knurled and gold-plated binding posts, rubber
Butyl rubber surrounds are superior
surrounds, and vented pole pieces with bumped back plates.
to foam in two important ways. First,
the butyl rubber resists moisture and 6-1/2" Woofer
will not dry rot, providing years of #290-306: • Power handling: 110 watts
service. Second, the rubber surround, due to its superior damping RMS/150 watts max •VCDIA: 1-1/2" • Le: 2.1
mH •Impedance: 8 ohms •Re: 7.4 ohms
characteristics,
distortion. Thesewill greatly
woofers arereduce cone
ideal for break upand
replacing andupgrading
ensure low • Frequency range: 46-3,000 Hz •Fs: 59 Hz •SPL: 87
dB 2.83V/1m • VAS: .27 cu. ft. • QMS: 6.31 • QES: .50
old, worn out drivers. They all feature a polypropylene cone, • QTS: .46 • XMAX: 4.0 mm • Dimensions: A: 6-7/8",
vented pole piece, foam gasket, soft poly dust cap, and stamped B: 6-1/8", C: 5-7/8".
steel frame.
#290-307: All specs the same except: • Le: .90 mH • Impedance: 4 ohms
6-1/2" Woofer • Re: 3.7 ohms • Fs: 46 Hz • SPL: 85.1 dB 2.83V/1m • VAS: .35 cu. ft. • QES:
.97 • QTS: .87.
#290-350: • Power handling: 60 watts
RMS/85 watts max •VCDIA: 1-1/2" • Le: #290- 306 (8 ohm GW-6PC/8)
.26 mH • Impedance: 8 ohms • Re: 7.3 #290- 307 (4 ohm GW-6PC/4). . . . . . . . . . . . . . . . . .$22.50 (1-3) $20.35 (4-UP)
• Frequency range: 55-3,000 Hz • Fs: 58 Hz
• SPL: 85 dB 1W/1m • VAS: .41 cu. ft. • QMS: 8" Woofer
3.47 •QES: 1.15 • QTS: .86 • XMAX: 4.4 mm #290-312: • Power handling: 140 watts
• Dimensions: A: 6-1/2", B: 5-5/8", C: 3-1/4". RMS/ 270 watts max • VC DIA : 1-1/2" • Le:
#290-351: All specs the same except: • Le: .40 mH •Impedance: 4 ohms 1.2 mH • Impedance: 4 ohms • Re: 3.7 ohms
VAS QMS • Frequency range: 40-4,000 Hz • Fs: 44 Hz
• Re:•3.6
3.05 QESohms
: .71 •• Q
Fs: 54 Hz • SPL: 90 dB 2.83V/1m •
TS: .57.
: .42 cu. ft. • : • SPL: 91 dB 2.83V/1m • VAS: .75 cu. ft. • Q MS: 5.95
• Q ES: .49 • Q TS: .45 • X MAX: 3.55 mm • Dimensions:
#290- 350 (8 ohm GW-6028) A: 8-3/1 6", B: 7-3/16", C: 4-3/ 16".
#290- 351 (4 ohm GW-6024) . . . . . . . . . . . . . . . $16.50 (1-3) $14.80 (4-UP) #290-314: All specs the same except: • Le: .99 mH • Impedance: 8 ohms
• Re: 7.24 • Fs: 55 Hz • SPL: 88 dB 2.83V/1m • V AS: .51 cu. ft. • Q ES: .62
8" Woofer • Q TS: .56.
#290-355: •Power handling: 65 watts #290- 312 (4 ohm GW-8PC/4)
RMS/90 watts max • VCDIA: 1-1/2" • Le: #290- 314 (8 ohm GW-8PC/8). . . . . . . . . . . . . . . . . .$29.65 (1-3) $27.95 (4-UP)
.28 mH • Impedance: 8 ohms • Re: 7.2
ohms • Frequency range: 35-2,500 Hz • Fs: 10" Woofer
39 Hz • SPL: 85 dB 1W/1m • VAS: 1.39 cu. ft.
#290-322: • Power handling: 140 watts
• QMS: 4.07 • QES: 1.23 • QTS: .94 • XMAX: 4.6
RMS/ 270 watts max • VCDIA: 1-1/2" • Le:
mm • Dimensions: A: 8", B: 7-1/4", C: 3-5/8".
1.4 mH • Impedance: 4 ohms • Re: 3.8
#290-356: All specs the same except: • Le: .40 mH • Impedance: 4 ohms ohms • Frequency range: 40-2,500 Hz • Fs:
• Re: 3.7 ohms • Fs: 44 Hz • SPL: 90 dB 2.83V/1m • VAS: 1.08 cu. ft. 45 Hz • SPL: 93 dB 2.83V/1m • V AS: 1.12 cu. ft.
• QMS: 3.42 • QES: .93 • QTS: .73. • QMS: 4.50 • QES: .45 • QTS: .40 • XMAX: 3.55 mm
• Dimensions: A: 10-1/4", B: 9-1/4", C: 4-7/8".
#290- 355 (8 ohm GW-8028)
#290- 356 (4 ohm GW-8024) . . . . . . . . . . . . . . . $17.50 (1-3) $15.91 (4-UP) #290-324: All specs the same excep t: • Le: 1.85 mH • Impedance: 8 ohms
• Re: 7.22 ohms • SPL: 90.4 dB 2.83V/1m • Q ES: .52 • QTS: .47.
10" Woofer #290- 322 (4 ohm GW-10PC/4)
#290-360: • Power handling: 80 watts #290- 324 (8 ohm GW-10PC/8) . . . . . . . . . . . . . . . . .$39.75 (1-3) $36.95 (4-UP)
RMS/115 watts max • VCDIA: 1-1/2"
• Le: .5 mH • Impedance: 8 ohms
12" Woofer
• Re: 7.2 ohms • Frequency range: #290-332: • Power handling: 140 watts
30-2,000 Hz • Fs: 33 Hz • SPL: 86 dB 1W/1m RMS/270 watts max • VC DIA: 2.0" • Le:
• VAS: 3.19 cu. ft. • QMS: 4.34 • QES: 1.45 • QTS: 1.7 mH • Impedance: 4 ohms • Re: 3.7
1.09 • XMAX: 4.6 mm • Dimensions: ohms • Frequency range: 32-2,000 Hz
A: 10", B: 9-1/ 8", C: 4-1/2". • Fs: 32 Hz • SPL: 93 dB 2.83V/1m • VAS:
2.79 cu. ft. • Q MS: 3.85 • QES: .44 • Q TS: .39
#290-361: All specs the same except: • Le: .40 mH • Impedance: 4
• X MAX: 3.55 mm • Dimensions: A: 12-1/4", B:
ohms • Re: 3.5 ohms • Fs: 34 Hz • SPL: 90 dB 2.83V/1m • VAS: 2.87 cu.
ft. • QMS: 4.39 • QES: 1.10 • QTS: .88. 11-1/8", C: 5-3/8".
#290-334: All specs the same except: • Le: 2.06 mH • Impedance: 8 ohms
#290- 360 (8 ohm GW-1038) • Re: 7.14 ohms • SPL: 89.7 dB 2.83V/1m • Q ES: .56 • QTS: .49.
#290- 361 (4 ohm GW-1034) . . . . . . . . . . . . . . . $28.95 (1-3) $26.50 (4-UP)
#290- 332 (4 ohm GW-12PC/4)
12" Woofer #290- 334 (8 ohm GW-12PC/8) . . . . . . . . . . . . . . . . .$49.60 (1-3) $45.95 (4-UP)
#290-365: • Power handling: 100 15" Woofer
watts RMS/140 watts max • VC DIA: #290-336: • Power handling: 200
2" • Le: .59 mH • Impedance: 8 watts RMS/400 watts max • VCDIA:
ohms • Re: 7.1 ohms • Frequency 2" • Le: 2.4 mH • Impedance: 4
response: 30-1,500 Hz • Fs: 33 Hz ohms • Re: 3.7 ohms • Frequency
• SPL: 87 dB 1W/1m • VAS: 3.42 cu. ft. • QMS: range: 30-1,500 Hz • Fs: 33 Hz • SPL:
3.11 • QES: 1.26 • QTS: .89 • XMAX: 5.0 mm 95 dB 2.83V/1m • VAS: 4.42 cu. ft. • QMS:
• Dimensions: A: 12", B: 11", C: 5-3/16". 3.40 • QES: .49 • QTS: .43 • XMAX: 3.5 mm
#290-366: All specs the same except: • Le: .60 mH • Impedance: 4 ohms • Dimensions: A: 15-1/4", B: 13-7/8", C: 6-1/2".
• Re:•3.6
3.30 ohms • Fs: 30 Hz • SPL: 91 dB 2.83V/1m • VAS: 4.22 cu. ft. • QMS:
QES: .86 • QTS: .68. #290-338: AllSPL:
7.11 ohms • specs thedB
92.3 same except:
2.83V/1m •• Le: 2.5 • Impedance: 8 ohms • Re:
V AS: 5.40 cu. ft. • QMS: 3.59 • QES : .55
• QTS: .47.
#290- 365 (8 ohm GW-1248)
#290- 366 (4 ohm GW-1244) . . . . . . . . . . . . . . . $35.95 (1-3) $32.92 (4-UP) #290- 336 (4 ohm GW-15PC/4)
#290- 338 (8 ohm GW-15PC/8) . . . . . . . . . . . . . . . . .$69.80 (1-3) $64.95 (4-UP)
186
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 40/62
7/23/2019 Speacher building.pdf
Pioneer boasts 60 years of loudspeaker Speaker Building
experience and is one of the largest
speaker manufacturers in the world today. Their vision to produce world
Drivers
renowned loudspeakers is exemplified in the integration of state of the art
manufacturing facilities and design technology. Each woofer, midrange, 4-1/2" Full Range Driver
and tweeter has been carefully engineered to provide superior audio Paper cone with treated cloth surround.
reproduction. Experience for yourself the quality, value, and product Open back and stamped basket. Perfect
reliability that have made Pioneer an industry leader. for bookshelf type speakers and car stereo
installations.
3/4" Polymer Dome Tweeter Specifications: • Power handling: 20 watts
RMS/30 watts max • VC DIA: 1" • Impedance: 8
Polymer dome tweeter with strontium magnet. Ferro
uid cooling allows for maximum heat dissipation and ohms
70 Hz •
• Frequency
SPL: 90 dB response:
1W/1m • V70-15,000 Hz • Fs:
AS : .31 cu. ft. • X MAX :
increased power handling capability. Dome tweeters
1.1 mm • Q MS: 1.40 • Q ES: .47 • Q TS: .35 • Mfg.
offer natural and unstrained high frequencies.
#A11EC80-02F • Dimensions:A: 4-1/2", B: 4-1/8", C: 2-3 /8".
Specifications: • Power handling: 30 watts RMS/45 watts max • VC DIA: 3/4"
• Impedance: 8 ohms • Frequency response: 2,000-20,000 Hz • SPL: 90 #290- 010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.90 (1-3) $9.80 (4-UP)
dB1W/1m • Mfg. #FBDD69-51F • Dimensions: A: 4", B: 2-3/8", C: 1".
#270- 058 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.25 (1-3) $8.45 (4-UP) 5" Cone Midrange
Paper cone with poly foam surround.
Sealed back midrange with strontium
3/4" Dome Tweeter
magnet structure. Ferro uid cooling
Soft cloth dome tweeter with strontium magnet. Dome provides maximum heat dissipation and
tweeters offer natural and unstrained high frequencies. increased power handling capability.
Specifications: • Power handling: 35 watts RMS/50 Low distortion and high linearity for excellent
watts max • VC DIA: 3/4" • Impedance: 8 ohms reproduction of midrange frequencies.
• Frequency response: 2,000-20,00 0 Hz • SPL: 91 Specifications: • Power handling: 50 watts RMS/75
dB 1W/1m • Mfg. #ADD64-56F • Dimensions: A: 3-3/4", B: 2-1/2", C: 3/4". watts max • VC DIA: 3/4" • Impedance: 8 ohms • Frequency response: 700-
7,000 Hz • SPL: 92 dB 1W/1m • Mfg. #FD10DP61-06F • Dimensions: A:
#270- 045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.50 (1-3) $11.40 (4-UP)
5-1/8", B: 4-1/8", C: 2-1/4".
watts max • VC DIA: 1" • Impedance: 8 ohms Specifications: • Power handling: 50 watts
• Frequency response: 2,000-20,000 Hz • SPL: 100 RMS/75 watts max • VC DIA: 1" • Impedance: 8 ohms • Frequency response:
dB 1W/1m • Mfg. #AHE60-51F • D imensions: A: 500-14,000 Hz • SPL: 9 0 dB 1W/1m • Mfg. #FB11EC14-51F • Dimensions: A:
3-1/2" x 3 -1/2", B: 2-1/2", C: 2-1/2". 5-1/4", B: 4-1/8", C: 2-1/4".
#270- 050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.75 (1-3) $8.95 (4-UP) #280- 045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.95 (1-3) $14.95 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
187 41/62
7/23/2019 Speacher building.pdf
Speaker Building 10" Musical Instrument Speaker
Ribbed paper cone with treated cloth
Drivers accordion surround. Vented pole
piece for heat dissipation and reduced
distortion. Perfect replacement for many
P.A. and musical type speakers.
Specifications: • Power handling: 100
watts RMS/ 140 watts max • VC DIA: 2"
Paper Cone Woofers • Impedance: 8 ohms • Frequency response:
30-3,000 Hz • Magnet weight: 40 oz. • FS:
The classic line of paper cone woofers from Pioneer feature a
30 Hz • SPL: 96 dB 1W/1m • VAS: 5.8 cu. ft.
long-throw voice coil design for powerful bass output. The paper • XMAX: 3.3 mm • QMS: 1.08 • QES: .18 • QTS: .15 • Mfg. #A25GC40-51F-Q
cone (with special polymer coating on the 6-1/2") and foam • Dimensions: A: 10-1/8", B: 9-1/4", C: 5".
surround produce a very natural sound that is perfect for low
frequency reproduction. #290- 094 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $41.50 (1-3) $38.50 (4-UP)
#290- 105 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $33.50 (1-3) $30.80 (4-UP) #290- 045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.50 (1-3) $21.75 (4-UP)
188
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 42/62
7/23/2019 Speacher building.pdf
Polypropylene Woofers Speaker Building
Pioneer uses a special calcium Drivers
carbonate impregnated
polypropylene cone with high
Butyl Rubber Surround Woofers
internal loss, offering very low transient distortion and uniform
frequency response. Excellent bass and lower midrange reproduction. These high end woofers from Pioneer all feature a paper cone for
natural sounding bass reproduction and a butyl rubber surround.
6-1/2" Poly Woofer
Butyl rubber provides superior damping characteristics and resists
Specifications: • Power handling: 60 watts RMS/85 fungus rot better than conventional foam surrounds.
watts max • VCDIA: 1" • Impedance: 6 ohms
• Frequency range: 52-3,000 Hz • Fs: 52 Hz • SPL: 8" Woofer With Butyl Surround
VAS X MAX : QMS:
93 dB• 1W/1m
2.93 QES: .25• • QTS
: .81
: .23cu. ft. • #C16EU20-52D
• Mfg. .90 mm • Specifications: • Power handling: 80 watts
RMS/115 watts max • VC DIA : 2" • Impedance:
• Dimensions: A: 6-1/2", B: 5-1/2", C: 3". 8 ohms • Frequency range: 31-7,000 Hz • SPL:
#290- 027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.90 (1-3) $16.95 (4-UP) 91 dB 1W/1m • VAS: 2.44 cu. ft. • XMAX : 2.8 mm
• Q MS: 6.51 • Q ES: .27 • Q TS: .26 • FS: 31 Hz • Mfg.
#B20GR30-51F-Q • Dimensions: A: 8-1/8", B: 7-1/4",
8" Poly Woofer C: 4-3/8".
Specifications: • Power handling: 60 #290- 042 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.50 (1-3) $32.90 (4-UP)
watts RMS/85 watts max • VC DIA : 1-1/2"
• Impedance: 6 ohms • Frequency range: 10" Woofer With Butyl Surround
29-2,500 Hz • SPL: 93 dB 1W/1m • VAS:
Specifications: • Power handling: 90
3.99 cu. ft. • X MAX : 2.9 mm • Q MS: 2.86 • Q ES:
watts RMS/ 130 watts max • VC DIA: 2"
.22 • Q TS: .20 • F S: 29 Hz • Mfg. #B20FU20-51D
• Impedance: 8 ohms • Frequency
• Dimens ions: A: 8 -1/8", B: 7-1/4", C: 4-1/8".
range: 26-6,000 Hz • SPL: 90 dB 1W/1m
#290- 055 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.50 (1-3) $22.95 (4-UP) • VAS: 4.77 cu. ft. • XMAX: 3.0 mm • QMS:
4.17 • QES: .36 • QTS: .34 • FS: 26 Hz • Mfg.
10" Poly Woofer #W25GR31-51F • Dimensions: A: 10-1/8", B:
9-1/4", C: 4-1/2".
Specifications: • Power handling: 70 watts
RMS/ 100 watts max • VC DIA : 1-1/2"
#290- 088 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $44.95 (1-3) $41.90 (4-UP)
• Impedance: 6 ohms • Frequency 12" Woofer With Butyl Surround
range: 26-2,500 Hz • SPL: 93 dB 1W/1m
• VAS : 6.07 cu. ft. • X MA X: 2.9 mm • Q MS: Specifications: • Power handling: 150
3.36 • Q ES: .21 • Q TS: .20 • FS: 26 Hz • Mfg. watts RMS/210 watts max • VC DIA: 2-1/2"
#A25FU30-51D • Dimensions: A: 10-1/8", B: 9-1/4", • Impedance: 8 ohms • Frequency
C: 5". range: 19-5,000 Hz • SPL: 91 dB 1W/1m
• VAS: 11.91 cu. ft. • XMAX: 3.1 mm • QMS:
#290- 095 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.50 (1-3) $31.50 (4-UP) 4.37 • QES: .27 • QTS: .25 • FS: 19 Hz • Mfg.
#A30IR50-51F • Dimensions: A: 12-1/8", B:
12" Poly Woofer 10-7/8", C: 5-1/2".
Specifications: • Power handling: 100 #290- 118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $64.50 (1-3) $59.90 (4-UP)
watts RMS/140 watts max • VC DIA: 2"
• Impedance: 6 ohms • Frequency Bullet Piezo Horn Driver
range: 23-1,500 Hz • S PL: 96 dB 1W/1m
• VAS: 12.68 cu. ft. • XMAX: 2.5 mm • QMS: • Similar to KSN1142A
1.86 • QES: .18 • QTS: .16 • Fs: 23 Hz • Mfg. • Power handling: 100 watts RMS
#A30GU40 -51D • Dimensions: A: 12-1/8", B: • Frequency response: 1,800-
10-7/8", C: 5-1/2". 30,000 Hz
• SPL: 92 dB 1W/1m
#290- 125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.80 (1-3) $43.95 (4-UP) • Mounts to any 1-3/8"-18 TPI horn
• Mfg. #GT-400CD
15" Poly Woofer • Dimensions: Diameter: 2-7/16", depth: 1-1/2".
Specifications: • Power handling: #270- 069 . . . . . . . . . . . . . . . . . $2.80 (1-9) $2.50 (10-49) $1.98 (50-UP)
100 watts RMS/140 watts max
• VC DIA : 2" • Impedance: 6 ohms 3"x7" Piezo Horn Mid/ Tweeter
• Frequency range: 24-2,500 Hz
• Similar to KSN1025 • Power handling: 60
• SPL: 95 dB 1W/1m • VAS: 16.6 cu.
watts RMS/75 watts max • Frequency response:
ft. • XMAX : 2.5 mm • Q MS: 3.73 • Q ES: .35
• Q TS: .32 • F S: 24 Hz • Mfg. #A38GU40-52D 1,800-30,000 Hz • SPL: 90 dB • Mfg. #GT-1025
• Dimensions: A: 7-1/4", B: 3-1/10", C: 4".
• Dimensio ns: A: 15-1/4", B: 14", C: 6-1/2".
#290- 155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.95 (1-3) $47.50 (4-UP) #280- 062 . . . . . . . . . . . . . . . . .$1.78 (1-9) $1.52 (10-49) $1.38 (50-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
189 43/62
7/23/2019 Speacher building.pdf
Speaker Building W1-1070SE 1" Extende d Range Driver
This one-of-a-kind driver features a neodymium motor,
Drivers titanium cone, and ferrouid cooling, resulting in an
ultra compact, magnetically shielded extended range
TB-Speakers’ tweeters and mid- driver. This is an excellent choice for micro\mini
tweeters are all an excellent value computer speakers or car audio applications where
and have great versatility for just space is a premium. Recommended minimum
about any application. All Tang Band crossover frequency 250 Hz.
speakers feature a one-year warranty. Specifications: • Power handling: 15 watts RMS/40 watts max (with high pass
filter @ 250 Hz) • VC DIA: 1" • ZNOM: 8 ohms • Re: 6.0 ohms • Frequency range:
13-1264SE 1/2" Fabric Dome Tweeter 170-20,000 Hz • Fs: 170 Hz • SPL: 81 dB 1W/1m • Dimensions: A: 1-11/16", B:
1-1/2", C: 7/8".
This tweeter
tweeter, is abased
but is on the traditional
vast improvement mlyar
thanks dome
to its coated #264- 860 . . . . . . . . . . . . . . . . . . . . $14.99 LIST $11.90 (1-3) $10.82 (4-UP)
fabric diaphragm and neodymium motor. The result
is a low-cost tweeter with great top octave extension 28-847SE 1-1/8" Shielded
without the typical mylar dome sizzle. Great as a
replacement for stock tweeters or for use in inexpensive multimedia systems.
Fabric Dome Tweeter
Specifications: • Power handling: 3.5 watts RMS/50 watts max • VC DIA : 1/2" The neodymium motor structure and damped
• Impedance: 6 ohms • Re: 5.8 ohms • Frequency range: 3,000-20,000 Hz rear chamber give this tweeter performance that
• Fs: 3,000 Hz • SPL: 90 dB 1W/1m • Dimensions: A: 2-3/8" square, can rival many of the expensive drive units on
B: 1-1/2", C: 1/2". the market. A low Fs, well-damped 1-1/8" dome,
and tuned rear chamber produce well-behaved
#264- 840 . . . . . . . . . . . . . . . . . . . . . . . .$8.99 LIST $7.36 (1-3) $6.70 (4-UP) performance for all occasions. The small mounting flange is sure to make
this a popular tweeter for MTM designs. Neodymium motor allows close
25-302SH 1" Shielded Fabric Dome Tweeter placement to CRT based monitors.
This small tweeter utilizes a soft fabric dome a nd Specifications: • Power handling: 12 watts RMS/100 watts max • VCDIA: 1-1/8"
slightly horn-loaded ange, resulting in an extremely • Impedance: 8 ohms • Re: 6.0 ohms • Frequency range: 1,500-25,000 Hz
at and
small extended
size, frequency
it has good powerresponse. Despitetothe
handling thanks its • Fs: 850 Hz • SPL: 90 dB 1W/1m • Dimensions: A: 2-7/8", B: 2", C: 1-7/8".
ferrouid cooled shielded neodymium motor structure. #264- 823 . . . . . . . . . . . . . . . . . . . . $29.99 LIST $24.59 (1-3) $22.35 (4-UP)
The truncated ange allows for close spacing of drivers,
especially important in MTM designs.
28-847SD 1-1/8" Shielded
Specifications: • Power handling: 8 watts RMS/80 watts max • VCDIA: 1"
• Impedance: 8 ohms • Re: 6.0 ohms • Frequency range: 1,400-20,000 Hz
Fabric Dome Tweeter
• FS: 1,400 Hz • SPL: 91 dB 1W/1m • Dimensions: A: 2-3/4" x 2-1/8",
B: 1-15/16", C: 1". The neodymium motor structure and damped
rear chamber give this tweeter performance
#264- 804 . . . . . . . . . . . . . . . . . . . . $24.99 LIST $19.94 (1-3) $18.13 (4-UP) that can rival many of the expensive drive
units on the market. A low Fs, well-damped
25-1166SJ 1" Shielded Fabric Dome Tweeter 1-1/8" dome, and tuned rear chamber produce
This compact neodymium tweeter offers very rened well-behaved performance for all occasions. The
performance that is unusual for this size and price small mounting ange is sure to make this a popular
range. An enhanced dome dampening technique tweeter for MTM designs. Neodymium motor allows
gives excellent high frequency extension as well as close placement to CRT based monitors.
good low-end response. With ferrouid in the gap and Specifications: • Power handling: 12 watts RMS/100 watts max • VCDIA:
a damped rear chamber, crossover design becomes 1-1/8" • Impedance: 8 ohms • Re: 6.0 ohms • Frequency range: 850-
much simpler. The small mounting ange is excellent for compact multimedia 25,000 Hz • FS: 850 Hz • SPL: 90 dB 1W/1m • Dimensions: A: 2-7/8", B:
and home theater systems. 2", C: 1-7/8".
Specifications: • Power handling: 8 watts RMS/80 watts max • VCDIA: 1"
#264- 822 . . . . . . . . . . . . . . . . . $29.99 LIST $24.59 (1-3) $22.35 (4-UP)
• Impedance: 4 ohms • Re: 3.0 ohms • Frequency range: 920-22,000 Hz
• Fs: 920 Hz • SPL: 90 dB 1W/1m • Dimensions: A: 2-5/8", B: 1-13/16",
C: 1-1/16".
50-1426SA 2" Textile Dome Midrange
#264- 834 . . . . . . . . . . . . . . . . . . . . . $24.99 LIST $19.49 (1-3) $17.72 (4-UP) The neodymium motor structure and damped rear chamber
give this midrange performance that can rival many of
25-1414SC 1" Titanium Dome Tweeter
the expensive drive units on the market. A low Fs,
This tweeter utilizes a titanium dome, ferrouid cooling, well-damped 2" dome, and tuned rear chamber
phase shield, and damped rear chamber, resulting in produce well-behaved performance. The result is
good power handling, improved dispersion, and low a smoother frequency response and good power
resonant frequency. handling. Neodymium motor allows close placement
Specifications: Power handling: 8 watts RMS/80 to CRT based monitors.
watts max • VC DIA: 1" • Impedance: 4 ohms • Re: 3.0 Specifications: • Power handling: 20 watts RMS/150
ohms • Frequency range: 800-20,000 Hz • Fs: 800 Hz • SPL: 90 dB 1W/1m watts max • VC DIA: 2" • Nominal Impedance: 6 ohms
• Dimensions: A: 2-5/8", B: 1-13/16", C: 1-1/4". • Re: 5.6 ohms • Frequency range: 550-10,000 Hz • Fs: 550
Hz • SPL: 90 dB 1W/1m • Dimensions: A: 4-3/8", B: 3-5/8", C: 2-5/8"
#264- 835 . . . . . . . . . . . . . . . . . . . . $29.99 LIST $23.79 (1-3) $21.63 (4-UP)
#264- 856 . . . . . . . . . . . . . . . . . . . . $79.99 LIST $64.35 (1-3) $58.50 (4-UP)
25-1372SC 1" Titanium
Inverted Dome Tweeter W2-803SM 2" Driver
This unique t weeter offers a combination of features A small 2" driv e unit use able as a mid-t weeter or
not t ypically found in this price range. An inverted extended-range midbass. Features include a silver
titanium dome, neodymium motor, aluminum poly cone, stamped steel basket, solid aluminum
faceplate, ferrouid cooling, and a shorting ring are just a few. The result is a phase plug, shielded neodymium motor, s-shaped
highly efcient, wide dispersion, minimum distortion t weeter with good power surround, and venting under the spider. Great for A/V,
handling and a smooth frequency response. A great tweeter for multiwoofer multimedia, automotive, or multi-driver hi- use.
MTM applications. Specifications: • Power handling: 8 watts RMS/16 watts max • VCDIA : 3/4"
Specifications: • Power handling: 8 watts RMS/80 watts max • VCDIA: 1" • Impedance: 4 ohms • Re: 3.6 ohms • Frequency range: 160-20,000 Hz
• Impedance: 6 ohms • Re: 5.8 ohms • Frequency range: 1,300-25,000 Hz • Fs: • Fs: 160 Hz • SPL: 85 dB 1W/1m • VAS : .01 cu. ft. • Q MS: 2.25 • Q ES: .41
1,300 Hz • SPL: 94 dB 1W/1m • Dimensions: A: 4-1/8", B: 3-3/8", C: 1-1/16". • Q TS: .35 • X MAX : 1 mm • D imensions: A: 2-1/4", B: 2-1/8", C: 1-3/8".
#264-858 . . . . . . . . . . . . . . . . . . . . $59.99 LIST $54.92 (1-3) $50.53 (4-UP) #264- 805 . . . . . . . . . . . . . . . . . . . . $20.99 LIST $16.32 (1-3) $14.83 (4-UP)
190
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 44/62
7/23/2019 Speacher building.pdf
Speaker Building
Drivers
This driver features a black cosmetic stamped steel Specifications: • Power handling: 10 watts RMS/20
frame, silver coated paper cone, rubber surround, watts max • VC DIA : 3/4" • Impedance: 8 ohm s • Re:
and solid aluminum phase plug. Renowned as one 6.6 ohms • Frequency range: 100-20,000 Hz • F S:
of the smoothest 3” full-range drivers on the market. 100 Hz • SPL: 85 dB 1W/1m • VAS: .06 cu. ft. • QMS: 5.51 • QES: .57 • QTS: .52
Shielded for A/V use. • XMAX: 1 mm • Dimensions: A: 3-5/8", B: 3", C: 1-5/8".
Specifications: • Power handling: 12 watts RMS/25 #264- 811 . . . . . . . . . . . . . . . . . . . . $26.99 LIST $21.07 (1-3) $19.16 (4-UP)
watts max • VC DIA: 3/4" • Impedance: 8 ohms • Re:
6.6 ohms • Frequency range: 110-20,000 Hz • Fs: 110
W3-881SJ and W4-656SC 3" and 4"
Hz • SPL: 87 dB 1W/1m • VAS: .06 cu. ft. • QMS: 6.57 Shielded Drivers
• QES: .65 • QTS: .59 • XMAX: .5 mm • Dimensions: A: 3-5/8", B: 3", C: 2". The heart of these drivers is a textured PPM cone,
#264- 813 . . . . . . . . . . . . . . . . . . . . $24.99 LIST $19.49 (1-3) $17.72 (4-UP) which combined with a rubber surround gives them
great versatility. The 3" version utilizes an underhung
neodymium motor, while the 4" uses a more tr aditional
W3-926SD 3" Shielde d Driver
shielded ceramic motor. Great for use in multimedia
This driver has an attractive pincushion style silver or home theater systems, and can even be used in
frame, lightweight poly cone, solid aluminum weather-resistant outdoor speakers.
phase plug, and a rubber surround. The precisely
W3-881SJ Specifications: • Power handling: 15
matching moving parts give a smooth frequency
watts RMS/30 watts max • VC DIA: 3/4" • Impedance:
response, matched good top end clarity, and
8 ohms • Re: 6.6 ohms • Frequency range: 100-
“air.” Neodymium motor and longer voice coil for
20,000 Hz • Fs: 100 Hz • SPL: 86 dB 1W/1m • VAS: .08
improved low-end response.
cu. ft. • QMS: 3.07 • QES: .80 • QTS: .63 • XMAX .5 mm
Specifications: • Power
watts max • VCDIA : 3/4" •handling: 12 watts
Impedance: RMS/25
8 ohms • Re: 6.0 ohms • Frequency • Dimensions: A: 3-5/8", B: 3", C: 1-7/8".
W4-656SC Specifications: • Power handling: 25 watts RMS/50 watts max • VCDIA:
range: 110-20,000 Hz • Fs: 110 Hz • SPL: 85 dB 1W/1m • VAS: .07 cu. ft.
1" • Impedance: 8 ohms • Re: 6.0 ohms • Frequency range: 65-12,000 Hz • Fs:
• QMS: 5.18 • QES: .56 • QTS: .51 • XMAX: .75 mm • Dimensions: A: 3-3/16", B:
65 Hz • SPL: 88 dB 1W/1m • VAS: .18 cu. ft. • QMS: 2.39 • QES: .39 • QTS: .33
3-1/16", C: 2-1/4".
• XMAX 3 mm • Dimensions: A: 4-15/16", B: 3-3/4", C: 3-3/16".
#264- 815 . . . . . . . . . . . . . . . . . . . . $24.99 LIST $19.94 (1-3) $18.13 (4-UP) #264- 812 (3" - W3-881SJ) . . . . . . . . $22.99 LIST $18.35 (1-3) $16.69 (4-UP)
#264- 820 (4" - W4-656SC) . . . . . . . . $33.99 LIST $26.85 (1-3) $24.41 (4-UP)
W3-319SF 3" Shielded Driver
This 3" driver features a rigid paper cone,
W2-880SD 2" Driver
santoprene surround, die-cast basket, A small 2" drive unit useable as a mid-tweeter or
and a shielded ceramic motor structure. extended-range midbass. Features include a black
The precisely matching moving parts give a smooth PPM cone, silver steel basket, solid aluminum phase
and extended frequency response. Great for A/V, plug, shielded neodymium motor, s-shaped surround,
multimedia, automotive, or multi-driver hi- use. and venting under the spider. Great for A/V, multimedia,
Specifications: • Power handling: 15 watts RMS/25 automotive, or multi-driver hi- use.
watts max • VCDIA: 3/4" • ZNOM: 8 ohms • Re: 6.6 Specifications: • Power handling: 10 watts RMS/20 watts max • VCDIA: 3/4"
ohms • Frequency range: 100-20,000 Hz • Fs: 100 Hz • SPL: 87 dB 1W/1m • Impedance: 8 ohms • Re: 6.0 ohms • Frequency range: 330-20,000 Hz
• VAS: .06 cu. ft. • QMS: 6.77 • QES: .57 • QTS: .53 • XMAX: .2 mm • Dimensions: • Fs: 165 Hz • SPL: 86 dB 1W/1m • VAS: .01 cu. ft. • Q MS: 3.52 • Q ES: .39
A: 3-5/8 ", B: 3", C: 2-3/8". • Q TS: .35 • X MAX : 1 mm • D imensions: A: 2-1/4", B: 2-1/8", C: 1-3/8".
#264- 819 . . . . . . . . . . . . . . . . . . . . . $ 2 6 . 9 9 LIST $21.07 (1-3) $19.16 (4-UP) #264- 806 . . . . . . . . . . . . . . . . . . . . $19.99 LIST $15.64 (1-3) $14.21 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
191 45/62
7/23/2019 Speacher building.pdf
Speaker Building W4-1337SA 4" Titanium Cone Driver
This high-quality full range 4" driver utilizes
Drivers a titanium cone, solid aluminum phase plug,
santoprene rubber surround, underhung coil,
W3-879SC and W4-654SE and large shielded motor structure. It offers high
3" and 4" Shielded Drivers power handling, good mechanical excursion
abilities, and strong bass performance for a
These drivers feature black cosmetic stamped driver of this size. Great for home theater or hi-
steel frames, black aluminum phaseplugs, midbass applications.
curvilinear paper cones, and rubber surrounds.
Specifications: • Power handling: 25 watts RMS/50 watts max • VCDIA: 1"
They offer a smooth and extended frequency
• Impedance: 8 ohms • Re: 6.8 ohms • Frequency range: 70-20,000 Hz • Fs:
response, and are shielded for A/V use.
70 Hz • SPL: 87 dB 1W/1m • VAS: .17 cu. ft. • QMS: 1.51 • QES.49 • QTS: .37
W3-879SC Specifications: • Power handling: • XMAX: 3 mm • Dimensions: A: 4-15/16", B: 3-3/4", C: 2-7/8".
15 watts RMS/30 watts max • VC DIA: 3/4"
• Impedance: 8 ohms • Re: 6.6 ohms • Frequency #264- 848 . . . . . . . . . . . . . . . . . . . . $61.99 LIST $54.64 (1-3) $52.11 (4-UP)
range: 105-20,000 Hz • Fs: 105 Hz • SPL: 86 dB
1W/1m • VAS: .06 cu. ft. • QMS: 7.22 • QES: .65 W4-1052SD 4" Driver 4 Ohm
• QTS: .59 • XMAX: .5 mm • Dimensions: A: 3-5/8", B: 3", C: 2". A neodymium-powered 4" driver, this unit offers
W4-654SE Specifications: • Power handling: 20 watts RMS/50 watts max great bass extension and a smooth frequency
• VC DIA: 1" • Impedance: 8 ohms • Re: 6.0 ohms • Frequency range: 65-13,000 response. The unique ultra-thin polypropylene
Hz • Fs: 65 Hz • SPL: 86 dB 1W/1m • VAS: .22 cu. ft. • QMS: 2.94 • QES: .57 cone maintains strength via special ridges in
• QTS: .48 • XMAX: 3 mm • Dimensions: A: 4-5/8", B: 3-9/16", C: 2-3/4". the cone, while having a very low moving mass.
A long voice coil, rubber surround, and phase plug
#264- 810 (3" - W3-879SC) . . . . . . . . $24.99 LIST $19.25 (1-3) $17.80 (4-UP)
allow good use of this driver’s 4 mm of Xmax. 4 ohm
#264- 816 (4" - W4-654SE) . . . . . . . . $25.99 LIST $20.28 (1-3) $18.44 (4-UP) impedance is great for automotive use or high-sensitivity
designs.
W3-594SB and W4-6 16SA 3"
and 4" Shielded Drivers Specifications: • Power handling: 20 watts RMS/40 watts max • VCDIA: 1"
• Impedance: 4 ohms • Re: 3.80 ohms • Frequency range: 60-15,000 Hz • FS:
These drivers have attra ctive pincushion style silver 63 Hz • SPL: 87 dB 1W/1m • VAS: .26 cu. ft. • QMS: 4.52 • QES: .49 • QTS: .44
frames, black paper cones, solid aluminum phase • XMAX: 3.4 mm • Dimensions: A: 4-9/16", B: 3-3/4", C: 2-1/4".
plugs, and rubber surrounds. The pincushion frame
allows closer driver-to-driver spacing than normal, which #264- 828 . . . . . . . . . . . . . . . . . . . . $34.99 LIST $27.53 (1-3) $25.03 (4-UP)
makes them great for multi-driver systems. Shielded for
A/V use. W4-937SF 4" Coaxial Speaker
W3-594SB Specifications: • Power handling: 12 watts RMS/25 watts max • VCDIA: Coaxial 4" speaker with a paper cone, rubber
3/4" • Impedance: 8 ohms • Re: 6.6 ohms • Frequency range: 100-20,000 Hz surround, and 3/4" silk dome tweeter. A
• Fs: 100 Hz • SPL: 87 dB 1W/1m • VAS: .06 cu. ft. • QMS: 6.59 • QES: .71 • QTS: neodymium motor structure and long-throw coil
.64 • XMAX: .4 mm • Dimensions: A: 3-3/16", B: 3-1/16", C: 2-1/4". design allow this woofer to produce solid low
W4-616SA Specifications: • Power handling: 40 watts RMS/80 watts max frequencies. A built-in crossover allows easy
• VC DIA: 1" • Impedance: 8 ohms • Re: 6.0 ohms • Frequency range: connection and implementation. Great for home
70-14,000 Hz • Fs: 70 Hz • SPL: 88 dB 1W/1m • VAS: .20 cu. ft. • QMS: 2.80 theater or high-end automotive applications.
• QES: .38 • QTS: .34 • XMAX: 3 mm • Dimensions: A: 4-3/16", B: 4", C: 2-3/4". Specifications (woofer): • Power handling: 25
watts RMS/50 watts max • VC DIA: 1-1/4" • Impedance: 8 ohms • Re: 6.8 ohms
#264-814 (3" - W3-594SB) . . . . . . . . .$23.99 LIST $19.15 (1-3) $17.41 (4-UP)
• Frequency range: 65-20,000 Hz • Fs: 65 Hz • SPL: 88 dB 1W/1m • VAS:
#264-818 (4" - W4-616SA) . . . . . . . . .$25.99 LIST $20.62 (1-3) $18.75 (4-UP) .17 cu. ft. • QMS: 1.22 • QES: .33 • QTS: .26 • XMAX: 4.5 mm • Dimensions: A:
W3-1364S and W4-1320SD 3" and 4" 4-5/8", B: 3-3/4", C: 3".
Bamboo Drivers #264- 821 . . . . . . . . . . . . . . . . . . . . $69.99 LIST $59.81 (1-3) $54.62 (4-UP)
Another T ang Band rst, B amboo ber cones!
A blend of paper and Bambo o bers p rovides
W5-704D 5-1/4" Woofer
a perfect combination of light weight and self- This high-quality poly cone woofer has
dampening. Neodymium motors with copper several unique features including a twin-roll
rings reduce distortion even further. The result of rubber surround, durable aramid spider, and
these features is a smooth frequency response cast aluminum frame. The lightweight poly
with a very natural, open sound. cone and phasing dustcap provide a smooth
W3-1364S Specifications: • Power handling: 12 watts RMS/25 watts max frequency response. Great for compact vented
• VC DIA: 3/4" • Impedance: 8 ohms • Re: 6.6 ohms • Frequency range: 105- two-way designs.
20,000 Hz • Fs: 105 Hz • SPL: 86 dB 1W/1m • VAS: .07 cu. ft. • QMS: 2.48 Specifications: • Power handling: 25 watts RMS/50
• QES: .77 • QTS: .59 • XMAX: .5 mm • Dimensions: A: 3-5/8", B: 3", C: 2". watts max • VC DIA: 1" • Impedance: 8 ohms • Re: 6.0 ohms • Frequency
W4-1320SD Specifications: • Power handling: 25 watts RMS/50 watts max range: 55-13,000 Hz • Fs: 55 Hz • SPL: 88 dB 2.83V/1m • VAS: .45 cu. ft.
• VC DIA: 1" • Impedance: 8 ohms • Re: 6.8 ohms • Frequency range: 75-20,000 • QMS: 1.93 • QES: .46 • QTS: .37 • XMAX: 3 mm • Dimensions: A: 6-3/16", B:
Hz • Fs: 75 Hz • SPL: 89 dB 1W/1m • VAS: .21 cu. ft. • QMS: 1.50 • QES: .48 4-7/8", C: 2-3/4".
• QTS: .37 • XMAX: 3 mm • Dimensions: A: 4-15/16", B: 3-3/4", C: 2-5/8". #264- 850 . . . . . . . . . . . . . . . . . . . . $30.99 LIST $24.70 (1-3) $22.45 (4-UP)
#264- 844 (3" - W3-1364S) . . . . . . . . $34.99 LIST $26.49 (1-3) $24.37 (4-UP)
#264- 846 (4" - W4-1320SD) . . . . . . . $62.99 LIST $49.82 (1-3) $45.29 (4-UP) W6-789S 6-1/2" Woofer
This woofer incorporates a unique
W4-657SH 4" Aluminum Cone Driver custom-molded surround with a dimpled
This high-quality 4" driver utilizes an aluminum alloy design to improve cone-edge damping.
cone, solid aluminum phase plug, rubber surround, This reduces cone breakup for a very
and large shielded motor structure. It offers high smooth overall frequency response. A
power handling, good mechanical excursion abilities, healthy XMAX and low Fs allow you to get
and strong bass performance for a driver of this size. strong bass performance in vented alignments.
Great for home theater or hi- midbass applications. Great for two-way bookshelf designs.
Specifications: • Power handling: 20 watts RMS/40 Specifications: • Power handling: 15 watts
watts max • VC DIA : 1" • Impedance: 8 ohms • Re: RMS/30 watts max • VC DIA: 1" • Impedance: 8
6.0 ohms • Frequency range: 65-15,000 Hz • Fs: ohms • Re: 6.0 ohms • Frequency range: 45-10,000 Hz • Fs: 45 Hz • SPL: 92
65 Hz • SPL: 88 dB 1W/1m • VAS: .22 cu. ft. • Q MS: 3.32 • Q ES : .43 • Q TS: .38 dB 1W/1m • VAS: 1.59 cu. ft. • QMS: 4.97 • QES: .40 • QTS: .37 • XMAX: 4.1 mm
• X MAX : 3 mm • Dimensions: A: 4-15/16", B: 3-3/4", C: 2-7/8". • Dimensions: A: 6-15/16", B: 5-7/8", C: 3".
#264- 817 . . . . . . . . . . . . . . . . . . . . $33.99 LIST $26.85 (1-3) $24.41 (4-UP) #264- 852 . . . . . . . . . . . . . . . . . . . . $54.99 LIST $43.96 (1-3) $39.96 (4-UP)
192
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 46/62
7/23/2019 Speacher building.pdf
WT-1427B 10" Speaker Building
Neodymium Subwoofer
• Low prole: only 3-3/16" in depth
Drivers
• 9.5 mm XMAX
• Lightweight neodymium magnet W69-1436 6" x 9" Neodymium Subwoofer
system
The shallow depth and oval footprint of
This unique subwoofer features a low this subwoofer allows many placement
prole, long throw design, making it options, in-wall, automotive doors, and
one of the few 10" subwoofers which narrow tower applications to name a
can be mounted in-wall. This is made few. With a large voice coil and powerful
possible by a strong neodymium neodymium motor, this is a unique,
magnet assembly and large voice coil. high quality subwoofer. Low prole: only
When depth is an issue and bass is a 2-3/16" in depth
must, look no further than this one-of-a-kind, high quality subwoofer.
Specifications: • Power handling: 80 watts RMS/160 watts max • VCDIA: 3"
Specifications: Power handling: 120 watts RMS/240 watts max • VC DIA: 3" • Impedance: 4 ohms • Re: 3.2 ohms • Frequency range: 40-350 Hz • Fs: 40
• Impedance: 4 ohms • Re: 3.2 ohms • Frequency range: 25-400 Hz • Fs: 25 Hz • SPL: 88 dB 1W/1m • VAS: 1.65 cu. ft. • QMS: 2.29 • QES: .28 • QTS: .25
Hz • SPL: 85 dB 1W/1m • VAS: 1.65 cu. ft. • QMS: 2.62 • QES: .35 • QTS: .31 • XMAX 5.5 mm • Dimensions: A: 6-1/2" x 9-1/4", C: 2-3/16"
• XMAX 9.5 mm • Dimensions: A: 10-1/2" B: 9-1/4", C: 3-3/16"
#264- 864 . . . . . . . . . . . . . . . . . . . . $98.99 LIST $78.93 (1-3) $71.75 (4-UP)
#264- 862 . . . . . . . . . . . . . . . . . . . . $86.99 LIST $78.60 (1-3) $72.20 (4-UP)
W69-1042J 6" x 9" Subwoofer
W6-1139S I and W8-1363SB
The oval shaped frame of the W69-1042
6" and 8" Neo Subwoofers gives you the surface area of a typical
Amazing bass in a compact package ! These 8" driver in the footprint of a 6-1/2".
one-of-a-kind subwoofers feature Perfect for constructing a narrow-bafe
outstanding XMAX and powerful neodymium subwoofer, or for automotive installs in
motors. Wide roll-rubber surrounds, heavy- factory 6" x 9" locations. High power handling
duty paper cones, at spiders, and large and long excursion for excellent low-bass
4-layer voice coils give impressive bass and performance.
high power handling. Venting under the spider and Specifications: • Power handling: 90 watts RMS/170 watts max • VCDIA: 1-1/2"
through the pole reduce compression and maximize • Impedance: 8 ohms • Re: 6.5 ohms • Frequency range: 35-350 Hz • Fs: 35
heat dissipation. These are the ultimate small box Hz • SPL: 87 dB 1W/1m • VAS: 1.34 cu. ft. • QMS: 6.05 • QES: .37 • QTS: .35
and multimedia subwoofers. • XMAX 7 mm • Dimensions: A: 6-1/2" x 9-1/4", C: 4-3/16"
W6-1139SI Specifications: • Power handling: 70 watts RMS/140 watts max #264- 837 . . . . . . . . . . . . . . . . . . . . $58.99 LIST $46.79 (1-3) $42.54 (4-UP)
• VC DIA : 1-1/2" • Impedance: 4 ohms • Re: 3.6 ohms • Frequency range:
35-800 Hz • Fs: 35 Hz • SPL: 83 dB 1W/1m • VAS: .52 cu. ft. • Q MS: 2.65 W8Q-1071F 8" x 12" Subwoofer
• Q ES: .47 • Q TS: .40 • XMAX 11.5 mm • Dimensions: A : 7", B: 5-1/2", C: 3-5/8 ".
This unique subwoofer driver offers
W8-1363SB Specifications: • Power handling: 180 watts RMS/ 300 watts max excellent custom install opportunities.
• VC DIA : 2" • Impedance: 4 ohms • Re: 3.2 ohms • Frequency range: 30-80 0 The unique oval shape allows this
Hz • Fs: 30 Hz • SPL: 84 dB 1W/1m • VAS : .66 cu.ft. • Q MS: 4.26 • Q ES: .31 woofer to t into custom pods or boxes
• Q TS: .29 • X MAX : 12 mm • Dime nsions: A: 8 -5/8", B: 7-1/4", C: 4-3/4". that other woofers simply won’t work
in. With its long excursion, w-shaped
#264- 832 (6" - W6-1139SI) . . . . . . . . $62.99 LIST $49.74 (1-3) $45.22 (4-UP)
rubber surround, and large voice coil, it can
#264- 833 (8" - W8-1363SB) . . . . . . . $95.99 LIST $76.67 (1-3) $69.68 (4-UP)
handle the power and put out the bass!
W5-1138S M 5-1/4" Neo Subwoofer Specifications: • Power handling: 250
watts RMS/500 watts max • VCDIA: 2" • Impedance: 4 ohms • Re: 3.2 ohms
Amazing bass in a c ompact package! This
• Frequency range: 27-200 Hz • Fs: 27 Hz • SPL: 89 dB 1W/1m • VAS: 3.15 cu.
one-of-a-kind 5-1/4" subwoofer has an
ft. • QMS: 4.21 • QES: .31 • QTS: .29 • XMAX 12 mm • Dimensions: A: 8-1/2" x
impressive 9.25 mm of XMAX . A wide-roll
12-1/8", C: 5-3/4".
surround, raised at spider, and large 1-1/4"
4-layer voice coil ensure impressive bass #264- 838 . . . . . . . . . . . . . . . . . . . . $99.99 LIST $79.89 (1-3) $72.63 (4-UP)
performance and high power handling. The
vented pole and vented spider allow good airow W8-740P 8" Long Excursion Subwoofer
around the coil to improve heat dissipation and reduce The W8-740P is one of the highest
compression. The ultimate miniature subwoofer driver! excursion 8" subwoofers available on the
Specifications: • Power handling: 30 watts RMS/60 watts max • VCDIA: 1-1/4" market. It utilizes a heavy-duty paper cone,
• Impedance: 4 ohms • Re: 3.4 ohms • Frequency range: 45-1,500 Hz • Fs: foam surround, and bumped back plate
45 Hz • SPL: 82 dB 1W/1m • VAS: .24 cu. ft. • QMS: 2.68 • QES: .61 • QTS: .49 for maximum mechanical movement. The
• XMAX: 9.25 mm • Dimensions: A: 6-1/8", B: 4-3/4", C: 3-1/8" 2" 4-layer voice coil, vented pole piece,
and heavy-duty aluminum voice coil former
#264- 831 . . . . . . . . . . . . . . . . . . . . $42.99 LIST $33.86 (1-3) $30.78 (4-UP) provide impressive power handling. Excellent for
W4-992SD and W5-876SD 4" and 5" small-enclosure home or automotive subwoofers.
Shielded Subwoofers Specifications: • Power handling: 150 watts
RMS/300 watts max • VC DIA : 2" • Impedanc e: 4
These unique small subwoofers feature long- ohms • Re: 3.2 ohms • Frequenc y range: 28-1,000 Hz • Fs: 28 Hz • SPL : 84
excursion high-power voice coils, vented pole dB 1W/1m • VAS: .81 cu. ft. • Q MS: 10.53 • Q ES: .30 • Q TS: .30 • X MAX : 12 mm
piece, special twin-roll surround, and a very rigid • Dimensions: A: 8-1/4", B: 7-1/4", C: 4-3/4"
cone. Great for mini 3-way designs or in multimedia
subwoofer systems. #264- 854 . . . . . . . . . . . . . . . . . . . . $81.99 LIST $65.37 (1-3) $59.43 (4-UP)
W4-992SD Specifications: • Power handling: 28 watts
y
RMS/56 watts max • VC DIA: 1" • Impedance: 8 ohms
e
• Re: 7.0 ohms • Frequency range: 55-3,000 Hz
• Fs: 55 Hz • SPL: 85 dB 1W/1m • VAS: .20 cu. ft. • QMS: 2.93 • QES: .40 • QTS: r K
.35 • XMAX 3 mm • Dimensions: A: 4-9/16", B: 3-3/4", C: 3" e n
k o
W5-876SSD Specifications: • Power handling: 40 watts RMS/80 watts max a i
• VC DIA: 1-1/4" • Impedance: 8 ohms • Re: 6.4 ohms • Frequency range:
50-2,000 Hz • Fs: 50 Hz • SPL: 86 dB 1W/1m • VAS: .25 cu. ft. • QMS: 3.90 e
p s
n
• QES: .36 • QTS: .33 • XMAX: 5 mm • Dimensions: A: 6-1/8", B: 3-3/4", C: 4-7/8" S e
#264- 824 (4" - W4-992SD) . . . . . . . . $29.99 LIST $23.57 (1-3) $21.42 (4-UP) m
i
#264- 826 (5" - W5-876SD) . . . . . . . . $38.99 LIST $31.16 (1-3) $28.33 (4-UP) D
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
193 47/62
7/23/2019 Speacher building.pdf
Speaker Building
Drivers
Hi-Vi Research® has more than a decade’s worth of experience in the loudspeaker industry and knows what it takes to build a serious
product. Every step of the design process is focused on meeting the ultimate goal of producing the highest-quality and best-sounding
transducer. The success of Hi-Vi Research can be attributed to their excellent products which can be incorporated into a wide range of
designs that both look great and sound great.
#297- 404 . . . . . . . . . . . . . . . . . . $198.00 LIST $149.40 (1-3) $144.95 (4-UP) #297- 401 (RT1II) . . . . . . . . . . . . . . . $57.60 LIST $47.67 (1-3) $44.95 (4-UP)
#297- 402 (RT2II) . . . . . . . . . . . . . . $100.80 LIST $86.45 (1-3) $84.90 (4-UP)
194
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 48/62
7/23/2019 Speacher building.pdf
R1L Round Planar Tweeter Speaker Building
The innovative round planar design of this tweeter
uses a spiral etched conductor on a polyimide Drivers
lm. The optimized solid copper phase plug and
FEA designed faceplate help to improve the off- S1 4" Coaxial Speaker
axis response for a wider soundstage. Offering
This unique 2-way concentric driver utilizes a
outstanding clarity with a very natural tone, this
circular ribbon tweeter surrounded by a ring-
tweeter is excellent for 3-way designs, and should
type radiator midrange. The tweeter features a
optimally be used from 3,500 Hz on up.
ribbon diaphragm and a copper phase plug.
Specifications: • Power handling: 5 watts RMS/20 watts max • Impedance: The midrange features a dual-roll treated cloth
4 ohms • Frequency range: 3,500-40,000 Hz • SPL: 88 dB 2.83V/1m diaphragm, large voice coil, and a damped rear
• Dimensions: A: 4-3/8", B: 3-5/8", C: 1-1/2". chamber. Both are terminated with gold plated push
#297- 403 . . . . . . . . . . . . . . . . . . . . $43.20 LIST $31.25 (1-3) $29.80 (4-UP) terminals. Dimensions: A: 4.65", B: 3.66", C: 2.28".
Tweeter specifications: • Power handling: 5 watt s
RMS/10 watts • ZNOM: 4 ohms • Re: 3.4 ohms • Frequency range: 650-8,000
SD1.1A Shielded Textile Dome Tweeter Hz • SPL: 90 dB 2.83V/1m • Recommended crossover frequency: >8,000.
This high-quality tweeter uses a precisely coated Midrange specifications: • Power handling: 15 watts RMS/30 watts max • ZNOM:
diaphragm and a dampening ring located below the 8 ohms • Re: 6 ohms • Frequency range: 6,000-20,000 Hz • Fs: 650 Hz • SPL:
dome. A special cast alloy faceplate offers excellent 90 dB 2.83V/1m • Recommended crossover frequency: >800 - <8,000.
physical protection of the diaphragm, while also #297- 461 . . . . . . . . . . . . . . . . . $86.00 LIST $77.40 (1-3) $72.50 (4-UP)
helping improve off-axis response.
Specifications: • Power handling: 15 watts RMS/30 watts
max • Impedance: 6 ohms • Frequency range: 2,000-20,000 Hz • Fs: 1,200 Hz Trinity6 6-1/2" Triaxial Driver
• SPL: 91 dB 2.83V/1m • Dimensions: A: 4-9/16", B: 3-7/8", C: 1-5/8". The Trinity6 6-1/2" triaxial driver is a
#297- 416 . . . . . . . . . . . . . . . . . . . . $13.70 LIST $12.60 (1-3) $12.33 (4-UP) classic convergence of two distinctly
innovative technologies. Employing
Hi-Vi's ultra high frequency circular
X1 Textile Dome Tweeter ribbon tweeter at the center of
the 3-way conguration. This tweeter
Featuring a precisely manufactured German features a ribbon diaphragm and a metal
diaphragm, this tweeter offers excellent airiness and phase plug. The midrange features a dual
overall sound quality. A copper clad aluminum voice roll treated cloth diaphragm and a damped
coil and ferrouid cooled motor ensure low compression rear chamber. Trinity6 produces a uniquely broad sound spectrum with wide
and high power handling. dispersion and unparalleled pure phase response. Three separate gold plated
Specifications: • Power handling: 15 watts RMS/30 watts max • Impedance: push terminal pairs are provided for tri-amping capabilities. Recommended
4 ohms • Frequency range: 2,000-20,000 Hz • Fs: 1,300 Hz • SPL: 92 dB minimum crossover 800 Hz and 8,000 Hz. This driver is being featured in a
2.83V/1m • Dimensions: A: 4-9/16", B: 3-1/2", C: 1-1/8". wide range of new products from in-ceiling speakers to home theater systems.
Dimensions: A: 6.81", B: 5.68", C: 2.34".
#297- 418 . . . . . . . . . . . . . . . . . . . . . . . .$9.99 LIST $9.14 (1-3) $8.67 (4-UP)
Tweeter specifications: • Power handling: 5 watts RMS/10 watts • ZNOM: 4
ohms • Re: 3.4 ohms • Frequency range: 650-8,000 Hz • SPL: 90 dB 2.83V/1m
• Recommended crossover frequency: >8,000.
TN28 Fabric Dome Tweeter Midrange specifications: • Power handling: 15 watts RMS/30 watts max • ZNOM:
The versatile design of this tweeter minimizes 8
90ohms • Re: 6 ohms
dB 2.83V/1m • Frequency range:
• Recommended 6,000-20,000
crossover frequency:Hz • Fs:
>800 650 Hz • SPL:
- <8,000.
diffraction while allowing front, rear, or side
mounting. The ferrouid-immersed 28 mm Woofer specifications: • Power handling: 40 watts RMS/80 watts max • VC DIA:
voice coil and exible leads provide good 3" • ZNOM: 4 ohms • Re: 3.2 ohms • Frequency range: 63-1,200 Hz • Fs: 63
power handling and stable excursion. The Hz • SPL: 90 dB 2.83V/1m • VAS: .20 cu. ft. • QMS: 2.50 • QES: .46 • QTS: .38
hand-treated fabric dome provides a very smooth • XMAX: 2.7 mm
frequency response while the neodymium motor and #297- 462 . . . . . . . . . . . . . . . $166.00 LIST $149.40 (1-3) $139.85 (4-UP)
large non-resonant rear chamber provide superior low-treble
performance.
Specifications: • Power handling: 40 watts RMS/100 watts max • VCDIA: 1-1/8" TN25 1" Fabric Dome Tweeter
• Impedance: 6 ohms • Re: 5.1 ohms • Frequency range: 2,000-20,000 Hz • Hand treated 1" fabric dome • Large non-resonant
• Fs: 1,600 Hz • SPL: 88 dB 2.83V/1m • Dimensions: 1-7/8" dia. x 3-1/4" L. rear acoustic chamber • Ferrouid cooled voice coil
for higher power handling • Self-shielding neodymium
#297- 409 . . . . . . . . . . . . . . . . . $14.40 LIST $14.25 (1-3) $13.94 (4-UP)
magnet • Small faceplate allows for closer placement
to bass/midrange driver for improved imaging.
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
195 49/62
7/23/2019 Speacher building.pdf
Speaker Building
Drivers
#297- 442 . . . . . . . . . . . . . . . . . . . . $48.60 LIST $35.77 (1-3) $35.00 (4-UP) #297- 434 . . . . . . . . . . . . . . . . . . . . $19.10 LIST $17.57 (1-3) $17.19 (4-UP)
#297- 456 . . . . . . . . . . . . . . . . . $144.40 LIST $121.63 (1-3) $118.99 (4-UP) #297- 441 . . . . . . . . . . . . . . . . . . . . $38.20 LIST $29.19 (1-3) $28.56 (4-UP)
#297- 411 . . . . . . . . . . . . . . . . . . . . . . $6.50 LIST $4.98 (1-3) $4.89 (4-UP) #297- 428 . . . $10.40 LIST $9.97 (1-3) $9.84 (4-UP)
B2S 2" Shielded Aluminum Mid/Bass B4N 4" Shielded Aluminum Mid/Bass
Specifications: • Power handling: 10 watts RMS/20 watts Specifications: • Power handling: 25 watts
max • VCDIA: 1" • Impedance: 8 ohms • Re: 6.5 ohms RMS/50 watts max • VCDIA: 1" • Impedance:
• Frequency response: 300-20,000 Hz • Fs: 152 Hz 8 ohms • Re: 6.5 ohms • Frequency range:
• SPL: 78 dB 1W/1m • VAS: .007 cu. ft. • QMS: 5.69 • QES: 50-10,000 • Fs: 56 Hz • SPL: 85 dB 1W/1m • VAS:
1.53 • QTS: 1.20 • XMAX: 1.5 mm • Dimensions: A: 2-1/8", .16 cu. ft. • QMS: 3.91 • QES: .63 • QTS: .52 • XMAX:
B: 1-7/8", C: 1-1/4". 3.2 mm • Dimensions: A: 4-5/8", B: 3-5/8", C: 2-3/4".
#297- 432 . . . . . . . . . . . . . . . . . . . $11.90 LIST $10.95 (1-3) $10.71 (4-UP) #297-429. . $15.10LIST $15.21 (1-3) $14.88 (4-UP)
196
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 50/62
7/23/2019 Speacher building.pdf
F Series Drivers Speaker Building
The unique F Series cones utilize a Drivers
unique matrix of Kevlar and paper fibers,
resulting in astounding midrange
clarity yet dynamic bass reproduction. Hi-Vi D-G Series Woofers
• Light and extremely rigid cone made
from Kevlar/paper composite The D-G Series woofers feature
• High loss rubber surround the same unique motor design
• High power handling voice coil on found in the standard D Series
aluminum former woofers, but utilize a Kevlar and
• Flat linear spider paper blended cone.
• High-density aluminum die-cast basket
• Shallow-prole cones
F5 Shielded Bass/Midrange • Large diameter voice coils
• Heavy-duty cast aluminum frames
Specifications: • Power handling: 35 watts • Excellent for dynamic two-way
RMS/70 watts max • VC DIA: 1" • Le: 0.49 mH designs or for the bass section in
• Impedance: 8 ohms • Re: 6.4 ohms • Frequency three-way designs
response: 45-5,000 Hz • Fs: 52 Hz • SPL: 86 dB • Inside-out motor design reduces stray
1W/1m • VAS: .32 cu. ft. • QMS: 4.94 • QES: .45 • QTS: magnetic eld
.41 • XMAX: 2.75 mm • Dimensions: A: 6-1/16", B: 4-1/2", C: 3".
#297- 435 . . . . . . . . . . . . . . . . . . . . $39.60 LIST $36.43 (1-3) $35.64 (4-UP) D5G Bass/Midrange
Specifications: • Power handling: 120 watts RMS/170 watts max • VCDIA: 3"
F6 Shielded Bass/Midrange • Impedance: 8 ohms • Re: 6.5 ohms • Frequency response: 45-2,500 Hz
Specifications: • Power handling: 60 watts RMS/85 watts max • VCDIA: 1" • Le: • Fs: 52 Hz • SPL: 83 dB 1W/1m • VAS: .22 cu. ft. • QMS: 3.74 • QES: .44
0.69 mH • Nominal impedance: 8 ohms • Re: 6.6 ohms • Frequency response: • QTS: .38 • XMAX: 4.8 mm • Dimensions: A: 5-15/16", B: 5", C: 2-3/4".
42-4,000 Hz • Fs: 42 Hz • SPL: 89 dB 1W/1m • VAS: .83 cu. ft. • QMS: 4.77 #297- 419 . . . . . . . . . . . . . . . . . $68.00 LIST $62.56 (1-3) $61.20 (4-UP)
• QES: .41 • QTS: .38 • XMAX: 3.55 mm • Dimensions: A: 7-3/4", B: 5", C: 3-3/4".
#297- 440 . . . . . . . . . . . . . . . . . . . . $50.00 LIST $46.00 (1-3) $45.00 (4-UP) D6G Bass/Midrange
Specifications: • Power handling: 120 watts RMS/170 watts max • VCDIA:
F8 Shielded Bass/Midrange 3" • Le: 0.84 mH • Impedance: 8 ohms • Re: 6.5 ohms • Fr equency
Specifications: • Power handling: 80 watts RMS/115 watts max • VCDIA: 1-3/8" response: 38-2,000 Hz • Fs: 47 Hz • SPL: 85 dB 1W/1m • VAS: .44 cu. ft.
• Le: 0.90 mH • Impedance: 8 ohms • Re: 6.7 ohms • Frequency response: • QMS: 6.58 • QES: .55 • QTS: .51 • XMAX: 5.25 mm • Dimensions: A: 6-7/8",
35-3,000 Hz • Fs: 33 Hz • SPL: 88 dB 1W/1m • VAS: 1.63 cu. ft. • QMS: 4.48 B: 5-3/8", C: 3".
• QES: .43 • QTS: .39 • XMAX: 5 mm • Dimensions: A: 9-7/16", B: 7-5/32", C: 4". #297- 420 . . . . . . . . . . . . . . . . . $70.20 LIST $64.58 (1-3) $63.18 (4-UP)
#297- 445 . . . . . . . . . . . . . . . . . . . . $71.60 LIST $65.87 (1-3) $64.44 (4-UP)
D8G Woofer
F10 Woofer Specifications: • Power handling: 150 watts RMS/215 watts max • VCDIA:
Specifications: • Power handling: 120 watts RMS/170 watts max • VCDIA: 2" 4" • Le: 1.26 mH • Impedance: 8 ohms • Re: 6.6 ohms • Fr equency
• Le: 1.98 mH • Impedance: 8 ohms • Re: 6.5 ohms • Frequency response: response: 32-1200 Hz • Fs: 33 Hz • SPL: 85 dB 1W/1m • Vas: 1.10 cu.
28-800 Hz • Fs: 28 Hz • SPL: 90 dB 1W/1m • VAS: 3.02 cu. ft. • QMS: 2.00 ft. • QMS: 2.32 • QES: .53 • QTS: .43 • XMAX: 8.25 mm • Dimensions: A:
• QES: .36 • QTS: .31 • XMAX: 6.5 mm • Dimensions: A: 11-5/16", B: 9-1/8", 9-9/16", B: 7-7/8", C: 3-13/16".
C: 5".
#297- 425 . . . . . . . . . . . . . . . . . $99.40 LIST $91.45 (1-3) $89.46 (4-UP)
#297- 450 . . . . . . . . . . . . . . . . . . . . $86.80 LIST $79.86 (1-3) $78.12 (4-UP)
D10G Woofer
F12 Woofer
Specifications: • Power handling: 150 watts RMS/215 watts max • VCDIA :
Specifications: • Power handling: 200 watts RMS/285 watts max • VCDIA: 2" 4" • Le: 1.2 mH • Impedance: 8 ohms • Re: 6.7 ohms • Frequency
• Le: 1.35 mH • Impedance: 8 ohms • Re: 6.5 ohms • Frequency response: response: 23-2,000 Hz • Fs: 22 Hz • SPL: 88 dB 1W/1m • VAS: 5.88 cu. ft.
25-600 Hz • Fs: 29 Hz • SPL: 90 dB 1W/1m • VAS: 4.40 cu. ft. • QMS: 2.26 • QMS: 2.23 • QES: .50 • QTS: .41 • XMAX: 8.25 mm • Dimensions: A: 11", B:
• QES: .48 • QTS: .39 • XMAX: 6.5 mm • Dimensions: A: 13-1/4", B: 11", 10", C: 4-1/4".
C: 5-5/16".
#297- 430 . . . . . . . . . . . . . . $ 1 1 4 . 1 0 LIST $104.97 (1-3) $102.69 (4-UP)
#297- 455 . . . . . . . . . . . . . . . . . $150.80 LIST $138.74 (1-3) $135.72 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
197 51/62
7/23/2019 Speacher building.pdf
Speaker Building MDT-33 Matched Soft Dome Tweeter Pair
The Morel MDT-33
Drivers matched pairs are
one of the most
Morel Acoustics has been producing precision respected classic
engineered loudspeakers for over 25 years. Their high-end tweeters.
products can be found in some of the world’s With an extremely
most discriminating audiophile designs. All Morel sweet and extended
high-end response,
tweeters feature hand treated 1-1/8 dome, "
this tweeter is airy
ferrofluid cooling, and state of the art construction. without the least bit of harshness. The 1-1/8" soft dome is driven via a double
The woofer drive units incorporate unique, huge magnet motor with damped rear chamber, and features high density ferrouid
198
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 52/62
7/23/2019 Speacher building.pdf
Specifications: • Power handling: 80 watts RMS/110 watts max • VCDIA: Specifications: • Power handling: 150 watts RMS/210 watts max • VCDIA: 2-1/8"
1-1/8" • Impedance: 8 ohms • Re: 5.3 ohms • Frequency response: 2,200- • Le: .36 mH • Impedance: 8 ohms • Re: 5.6 ohms • Frequency response:
20,000 Hz • Fs: 750 Hz • SPL: 88 dB 1W/1m • Dimension: A: 2-1/8" x 55-7,00 Hz • Fs: 65 Hz • SPL: 87 dB 1W/1m • VAS: .11 cu. ft. • QMS: 2.32 • QES:
2-1/8", B: 1-3/4", C: 2-1/4", D: 1-3/4". R.O. #277-064 .36 • QTS: .31 • XMAX: 3.0 mm • Dimensions: A: 4-5/8", B: 3-3/4", C: 2-1/4".
#277- 035 . . . . . . . . . . . . . . . . . $57.99 LIST $52.70 (1-3) $50.25 (4-UP) #297- 012 . . . . . . . . . . . . . . . . . $ 1 4 0 . 9 9LIST $127.00 (1-3) $121.00 (4-UP)
#277- 040 . . . . . . . . . . . . . . . . . $79.99 LIST $72.85 (1-3) $68.70 (4-UP) MW-164 6" Paper Cone Woofer
MDT-44 Compact Soft Dome Tweeter The MW-164 employs a vented double
magnet system which results in higher
Morel’s MDT-44 builds upon the already exceptional power handling, longer linear excursion,
MDT-40 by increasing sensitivity and extending the and superior bass response. Polymer
frequency response. Small faceplate allows very close treated paper cone, 3" Hexatech aluminum
placement to woofer or midrange for improved sound voice coil, and rubber surround.
integration. Fully shielded for A/V use.
Specifications: • Power handling: 150 watts
Specifications: • Power handling: 120 watts RMS/170 RMS/210 watts max • VC DIA: 3" • Le: .61 mH
watts max • VCDIA: 1-1/8" • Impedance: 8 ohms • Re: • Impedance: 8 ohms • Re: 6.3 ohms • Frequency response: 45-2,800 Hz
5.2 ohms • Frequency response: 2,200-22,000 Hz • Fs: • Fs: 55 Hz • SPL: 86 dB 1W/1m • VAS: .40 cu. ft. • QMS: 2.82 • QES: .89 • QTS:
750 Hz • SPL: 91 dB 1W/1m • Dimensions: A: 2-1/8" x 2-1/8", B: 1-3/4", .68 • XMAX: 4.25 mm • Dimensions: A: 6-1/4", B: 5-3/8", C: 2-11/16".
C: 2-1/4".
#297- 030 . . . . . . . . . . . . . . . . . $119.99 LIST $107.40 (1-3) $102.75 (4-UP)
#277- 042 . . . . . . . . . . . . . . . . . $ 1 0 4 . 9 9 LIST $97.60 (1-3) $93.40 (4-UP)
MW-266 8" Paper Cone Woofer
MDM-55 Compact Dome Midrange
The MW-266 incorporates Morel’s unique
No compromise 2-1/8" treated soft dome midrange
vented double magnet and 3" Hexatech
designed for high end multiple speaker systems. It
system to provide long excursion,
employs a powerful neodymium magnet (22 times
smooth response, and extremely low
stronger than ferrite!) enabling this unit to be both
distortion. Cone is made of polymer
compact and ultra lightweight. Features Hexatech
treated paper and is coupled to a rubber
aluminum voice coil technology, rear chamber
surround. Blends well with any of the Morel
loading, gold plated terminals, and is fully shielded to
tweeters, when crossed over at 2 kHz.
allow A/V use. This ne midrange retains the natural
“warmth” and “body” of sounds. Specifications: • Power handling: 150 watts RMS/210 watts max • VCDIA: 3"
Specifications: • Power handling: 200 watts RMS/285 watts max • Le: • Le: .54 mH
22-2,200 Hz ••FImpedance: 8 ohms • Re: 6.3 ohms • Frequency response:
S: 30 Hz • SPL: 89 dB 1W/1m • VAS: 2.83 cu. ft. • QMS: 2.45
2-1/8" • VCDIA: .19 mH • Impedance: 8 ohms • DC resistance: 6.3 ohms
• QES: .73 • QTS: .56 • XMAX: 4.25 mm • Dimensions: A: 8-3/4", B: 7-3/4",
• Frequency response: 250-6,500 Hz • Fs: 280 Hz • SPL: 91 dB 1W/1m
C: 2-13/16".
• Dimensions: A: 3-7/16" x 3-7/16", B: 3", C: 3-3/8".
#297- 040 . . . . . . . . . . . . . . . . . $129.99 LIST $116.95 (1-3) $110.30 (4-UP)
#287- 020 . . . . . . . . . . . . . . . . . $94.99 LIST $86.75 (1-3) $82.95 (4-UP)
Specifications: • Power handling: 150 watts RMS/210 watts max • VCDIA: 2-1/8" Specifications: • Power handling: 180 watts RMS/255 watts max • VCDIA: 3" • Le:
• Le: .25 mH • Impedance: 8 ohms • Re: 6.2 ohms • Frequency response: .63 mH • Impedance: 8 ohms • Re: 6.3 ohms • Frequency response: 20-1,600
50-6,000 Hz • Fs: 72 Hz • SPL: 85 dB 1W/1m • V AS: .15 cu. ft. • QMS: 3.13 • QES: Hz • FS: 29 Hz • SPL: 89 dB 1W/1m • VAS: 4.35 cu. ft. • QMS: 2.48 • QES: .83
1.03 • QTS: .75 • XMAX: 3.0 mm • Dimensions: A: 4-5/8", B: 3-3/4", C: 2-1/4". • QTS: .62 • XMAX: 4.25 mm • Dimensions: A: 10-5/16", B: 9", C: 3-1/8".
#297- 010 . . . . . . . . . . . . . . . . . . . . $94.99 LIST $84.80 (1-3) $80.25 (4-UP) #297- 045 . . . . . . . . . . . . . . . . . $159.99 LIST $144.70 (1-3) $137.65 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
199 53/62
7/23/2019 Speacher building.pdf
Speaker Building
Morel takes their advanced Hybrid motor
Drivers structure and places it onto a cutting-edge cast
alloy frame. This new frame is extremely “open”
The Hybrid Series woofers advance the technology and provides a reflection-free backwave, while
of the classic MW drivers by using a combination virtually eliminating any excursion noise — it is
of neodymium and ceramic magnets in the motor both functional and aesthetically pleasing. The
structure. This improves the magnetic strength in the rest of the features from the Hybrid line carry over to these models,
gap for greater control over the voice coil, enhancing including DPC cones, rubber surrounds, gold-plated terminals, and
their performance and making them more suitable vented voice coil formers. With the new cast frames and optimized
for small ported enclosures. Available in several different cone parameters, these drivers can be used in ultra high-end systems.
200
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 54/62
7/23/2019 Speacher building.pdf
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
201 55/62
7/23/2019 Speacher building.pdf
Speaker Building
Drivers
Innovative engineeringbased
acoustic construction and anonadvanced approach
the underhung to acousticSUPREME
conguration, construction make
voice the
coils SUPREME
move tweeters the
in a signicantly superior
higher high eld
magnetic per formance
and fully transducers.
remain there With
at all an
times during operation. As a result, the SUPREMEs provide more linear excursion, eliminate intermodulation distortion, eliminate sound compression at high
levels, and considerably improve low frequency reproduction. Replacement diaphragm 277-019.
Supreme 110 Specifications: • Power handling: 220 watts RMS/300 watts max • VCDIA: 1-1/8" • Impedance: 8 ohms • Re: 5.2 ohms • Frequency range: 1,400-22,000
Hz • Fs: 680 Hz • SPL: 91.5 dB 1W/1m • Dimensions: A: 4-5/16" B: 3-3/8", C: 2".
Supreme 130 Specifications: • Power handling: 220 watts RMS/300 watts max • VCDIA: 1-1/8" • Impedance: 8 ohms • Re: 5.2 ohms • Frequency range: 1,400-22,000
Hz • Fs: 680 Hz • SPL: 91.5 dB 1W/1m • Dimensions: A: 5-1/8", B: 3-3/8", C: 2".
#277- 050 (Supreme 110) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$369.99 LIST $334.65 (1-3 PRS) $318.50 (4 PRS-UP)
#277- 052 (Supreme 130) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99 LIST $445.60 (1-3 PRS) $424.90 (4 PRS-UP)
Morel NeoLin Woofers
Morel has advanced woofer technology with the NeoLin lines by using neodymium in their motor structure. These powerful motors exert much greater control
over the voice coil, making them more suitable for smaller, ported enclosures. They utilized the famous DPC (damped polymer composite) cones for a smooth
overall frequency response with powerful bass. These very dynamic and revealing drivers are used in many high-end commercial speakers.
MW-143 5" NeoLin Woofer MW-267 8" NeoLin Woofer
Specifications: • Power ha ndling: 150 Specifications: • Power handling: 180
watts RMS/210 watts max • VC DIA : 3" • Le: watts RMS/240 watts max • VC DIA : 3"
.60 mH • Impedance: 8 ohms • Re: 5.2 • Le: 1.0 mH • Impedance: 8 ohms • Re:
ohms • Frequency range: 35-5,20 0 Hz • Fs: 6.6 ohms • Frequency range: 20-3,000
52 Hz • SPL: 89 dB 1W/1m • VAS: .34 cu. ft. Hz • Fs: 30 Hz • SPL: 89 dB 1W/1m • Vas: 2.21
• Q MS : 2.32 • Q ES: .43 • Q TS: .36 • X MA X: 3.5 mm cu. ft. • Q MS: 2.50 • Q ES: .50 • Q TS: .42 • X MAX :
• Dimensions: A: 5 -5/8", B: 4-5 /8", C: 2-1/16". 4.25 mm • Dimensions: A: 8-3/4", B: 7-3/4", C: 2-3/4".
#297- 052 . . . . . . . . . . . . . . . . . $179.99 LIST $164.30 (1-3) $157.20 (4-UP) #297- 056 . . . . . . . . . . . . . . . . . $199.99 LIST $185.80 (1-3) $176.30 (4-UP)
MW-1077 10" NeoLin Woofer
MW-167 6" NeoLin Woofer Specifications: • Power handling: 200
Specifications: • Power handling: 150 watts watts RMS/270 watts max • VC DIA : 3"
RMS/210 watts max • VC DIA : 3" • Le: .77 • Le: .85 mH • Impedance: 8 ohms
mH • Impedance:
• Frequency range:8 30-4,500
ohms • Re: Hz6.6 ohms
• Fs: 47 • Re: 6.8 Hz
15-4,600 ohms • Frequency
• Fs: 28 Hz • SPL:range:
89 dB
Hz • SPL: 88 dB 1W/1m • VAS: .62 cu. ft. 1W/1m • VAS: 5.19 cu. ft. • QMS: 2.62 • QES: .62
• Q MS: 2.28 • Q ES: .48 • Q TS: .40 • X MAX : 4.25 mm • QTS: .51 • XMAX: 4.25 mm • Dimensions:
• Dimensio ns: A: 6-1/4", B: 5-3/8 ", C: 2-11/16". A: 10 -5/16 ", B: 9 ", C: 3 -1/8".
#297- 054 . . . . . . . . . . . . . . . . . $189.99 LIST $176.75 (1-3) $168.40 (4-UP) #297- 058 . . . . . . . . . . . . . . . . . $229.99 LIST $212.85 (1-3) $202.20 (4-UP)
202
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 56/62
7/23/2019 Speacher building.pdf
Aurum Cantus is a well-respected Speaker Building
name when it comes to high-end
Drivers
ribbon tweeters, but they also produce
excellent quality woofers. We are pleased
to offer their full line of products. The tweeters feature lightweight, pure aluminum “true” ribbon
construction, which provides exceptional detail and quick transient response. The woofers use high-quality cone materials
including Kevlar ® and carbon fiber and are built for great dynamics and clarity.
• Excellent high-frequency extension, can be used as a response design and good Xmax for
• Long-throw
supertweeter
• High sensitivity is great for efcient designs strong bass
Specifications: • Power handling: 40 watts RMS/60 watts Specifications: • Power handling: 60 watts
max • Impedance: 8 ohms • Frequency range: 1,700- RMS/90 watts max • VC DIA: 1" • Le: .35
40,000 Hz • SPL: 96 dB 2.83V/1m • Recommended mH • Impedance: 8 ohms • Re: 7.0 ohms
minimum crossover frequency: 2,500 Hz • Dimensions: A: • Frequency range: 38-7,000 Hz • Fs: 38 Hz
4-3/4" x 2 -15/16", B: 3-1/2" x 2- 3/16, C: 3-1/4" • Replacement • SPL: 90 dB 2.83V/1m • VAS: .95 cu. ft. • Q MS: 3.38 • Q ES: .30 • Q TS: .28
ribbon #276-403. • X MAX : 5 mm • Dimensions: A: 5-1/2", B: 4-7/8", C: 2-5/8".
#276- 402 . . . . . . . . . . . . . . . . . $199.99 LIST $178.64 (1-3) $168.13 (4-UP) #296- 404 . . . . . . . . . . . . . . . . . . . . $79.99 LIST $67.95 (1-3) $63.95 (4-UP)
AC-165 6-1/2" Midwoofer
• Non-woven carbon ber/kevlar
G3Si Ribbon Tweeter sandwich cone
• Lower-cost version of G3 tweeter • Rigid cone offers quick transient response
• Smooth frequency response and effortless reproduction • High compliance design for clean
• Excellent extension on both ends is great for DIY projects excursion
Specifications: • Power handling: 50 watts RMS/75 watts Specifications: • Power handling: 60 watts
max • Impedance: 6 ohms • Frequency range: 1,400- RMS/90 watts max • VC DIA : 1" • Le: .35
40,000 Hz • SPL: 99 dB 2.83V/1m • Recommended mH • Impedance: 8 ohms • Re: 7.0 ohms
minimum crossover frequency: 2,300 Hz • Dimensions: A: • Frequency range: 32-8,000 Hz • Fs: 32
5-1/2" x 2-15/16", B: 4- 5/8" x 2-1/16", C: 3 -1/4" • Replacement Hz • SPL: 89 dB 2.83V/1m • VAS: 1.95 cu. ft. • Q MS: 3.35 • Q ES: .36 • Q TS:
ribbon #276-411. .32 • XMAX : 5 mm • Dimensions: A: 6-3/8", B: 5-7/8", C: 2-7/8".
#276- 410 . . . . . . . . . . . . . . . . . $259.99 LIST $212.49 (1-3) $199.99 (4-UP) #296- 410 . . . . . . . . . . . . . . . . . . . . $89.99 LIST $76.77 (1-3) $72.25 (4-UP)
AC-180F1 7" Midwoofer
• Carbon/mica composite poly cone
G3 Ribbon Tweeter • Vented pole and extended back plate
• High sensitivity great for multi-driver speakers • Inverted rubber surround gives a
• Smooth frequency response and effortless reproduction high-tech look
• Excellent extension on both ends is great for DIY projects Specifications: • Power handling: 80
Specifications: • Power handling: 60 watts RMS/100 watts watts RMS/120
1-3/8" watts
• Le: .44 mH • max • VC DIA :8
Impedance:
max • Impedance: 8 ohms • Frequency range: 1,300-40,000
Hz • SPL: 100 dB 2.83V/1m • Recommended minimum ohms • Re: 7.0 ohms • Frequency
crossover frequency: 2,300 Hz • Dimensions: A: 6-5/8" x range: 30-5,000 Hz • Fs: 30 Hz • SPL: 90 dB 2.83V/1m • VAS: 2.40 cu. ft.
2-15/16", B: 5-7/8" x 2-1/8", C: 3-1/8" • Replacement ribbon • QMS: 3.73 • QES: .31 • QTS: .29 • XMAX: 6 mm • Dimensions: A: 7-3/16", B:
#276-413. 6-3/4", C: 3-3/8".
#276- 412 . . . . . . . . . . . . . . . . . $389.99 LIST $331.33 (1-3) $311.84 (4-UP) #296- 412 . . . . . . . . . . . . . . . . . . . . $98.99 LIST $83.90 (1-3) $77.28 (4-UP)
AC-180F1D 7" DVC Midwoofer
• Carbon/mica composite poly cone
G1 Ribbon Tweeter • Vented pole and extended back plate
• Ultra-high sensitivity great for multi-driver speakers • Dual voice coil design allows unique
crossover options
• Robust design can handle low crossover points
• High power handling and high output Specifications (V.C.s in paralle l): • Power
handling: 80 watts RMS/120 watts max
Specifications: • Power handling: 100 watts RMS/140
• VC DIA : 1-3/8" • Le: .19 mH • Impedance:
watts max • I mpedance: 8 ohms • Frequency range:
900-4 0,000 Hz • SPL: 102 dB 2.83V/1m • Recommended 4 ohms • Re: 3.4 ohms • Frequency range:
36-6,000 Hz • Fs: 36 Hz • SPL: 90 dB
minimum crossover frequency: 2,000 Hz • Dimensions:
2.83V/1m • VAS: 2.11 cu. ft. • Q MS: 4.73 • Q ES: .47 • Q TS: .43 • XMAX : 6 mm
A: 7-1/2" x 4- 3/16 ", B: 6 -9/16 " x 2-7/8 ", C: 3 -7/8"
• Dimensions: A: 7-3/16", B: 6-3/4", C: 3-3/8".
• Replacement ribbon #276-421.
#276- 420 . . .$499.99 LIST $424.99 (1-3) $399.99 (4-UP) #296- 414 . . . . . . . . . . . . . . . . . . . . $98.99 LIST $83.78 (1-3) $77.17 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
203 57/62
7/23/2019 Speacher building.pdf
Speaker Building
Drivers
204
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 58/62
7/23/2019 Speacher building.pdf
Speaker Building
Usher has many years of
experience in the high-end Drivers
audio industry, and is driven by
a passion for great sound. Their 8945P 7" Carbon Fiber/Paper Woofer
premium drive units feature low-
The 8945P takes the carbon ber/
distortion motor systems and only the highest-quality materials to paper blend cone from the 8945A and
ensure very accurate and dynamic musical reproduction. mates it with a machined aluminum
phase plug. The phase plug has several
benets including lower voice coil
9930 1" Textile Dome Tweeters inductance, lower distortion, reduced
The 9930 tweeters use a specially coated dome that power compression, and improved heat
offers at frequency response and a very open dissipation. The slightly bolder look
and detailed sound quality. A tuned rear chamber of the 8945P can give your system an
and a lightweight ferrouid in the gap provide a extra touch of class.
well-damped, low resonance point, making for easy Specifications: • Power handling: 70
crossover design. Top-quality materials including watts RMS/90 watts max • VC DIA: 1-5/8" • Le: .24 mH • Impedance: 8 ohms
precision cast faceplate, machined motor parts, • Re: 5.8 ohms • Frequency range: 34-5,000 Hz • Fs: 34 Hz • SPL: 86 dB
and an injected back cup are found on these tweeters. 2.83V/1m • VAS: 1.32 cu. ft. • QMS: 2.44 • QES: .39 • QTS: .33 • XMAX: 6.0 mm
Availabl e as bot h a shiel ded or s tandard unit. • Dimensions: A: 7”, B: 6-1/4", C: 3".
9930-20 (non-shielded): • Power handling: 10 watts RMS/15 watts max #296- 602 . . . . . . . . . . . . . . . . . $129.99 LIST $110.39 (1-3) $104.87 (4-UP)
(full range signal) • VC DIA: 1-1/8" • Impedance: 8 ohms • Re: 4.7 ohms
• Frequency range: 1,800-20,000 Hz • Fs: 660 Hz • SPL: 88 dB 2.83V/1m
• Dimensions: A: 4-1/8", B: 3-1/4", C: 1-3/4". 8848P 7" Paper Pulp Woofer
9930C-15 (shielded): All specs the same except: • Fs: 700 Hz.
An extr emely r igid and optimally
#276- 604 (9930-20 non-shielded) . . . $59.99 LIST $50.59 (1-3) $48.06 (4-UP) damped paper cone gives this
driver an especially clean midrange
#276- 606 (9930C-15 shielded) . . . . . $67.99 LIST $57.95 (1-3) $55.05 (4-UP) response, resulting in very accurate
9950 1" Textile Dome Tweeters vocal reproduction. The truncated
frame allows the 8848P to be closely
The 9950’s take the technology of the 9930’s one spaced for TMM or MTM designs.
step further to include a copper shorting ring on A relat ively hig h sensiti vity makes
the tweeter pole. This ring dramatically reduces the this driver a legitimate choice as
distortion levels, and also helps provide greater high a midrange in larger-format 3-way
frequency extension. The 9950 tweeters are extremely speakers.
well made units that contain all of the features found on
Specifications: • Power handling: 70 watts RMS/100 watts max • VCDIA: 1-5/8"
the highest-quality tweeters, but at a fraction of the price.
• Le: .25 mH • Impedance: 8 ohms • Re: 5.7 ohms • Frequency range: 33-5,000
9950-20 (non-shielded): • Power handling: 10 watts RMS/15 watts max Hz • Fs: 33 Hz • SPL: 87 dB 2.83V/1m • VAS: 1.63 cu. ft. • QMS: 7.47 • QES: .36
(full range signal) • VC DIA: 1-1/8" • Impedance: 8 ohms • Re: 4.7 ohms • QTS: .34 • XMAX: 6.0 mm • Dimensions: A: 7-1/4", B: 6-1/4", C: 3-1/4".
• Frequency range: 1,500-20,000 Hz • Fs: 560 Hz • SPL: 88 dB 2.83V/1m
• Dimensions: A: 4-1/8", B: 3-1/4", C: 1-3/4". #296- 604 . . . . . . . . . . . . . . . . . $129.99 LIST $110.39 (1-3) $104.87 (4-UP)
9950C-15 (shielded): All specs the same except: • Fs: 700 Hz.
®
#276- 608 (9950-20 non-shielded) . . . $69.99 LIST $59.79 (1-3) $56.80 (4-UP) 8836A 7" Kevlar Woofer
#276- 610 (9950C-15 shielded) . . . . . $79.99 LIST $67.15 (1-3) $63.79 (4-UP) The yellow Kevlar® cone with black
dustcap gives this driver a very modern
9845 2" Textile Dome Midrange and attractive look. The Kevlar ® cone
material offers excellent midrange and
The 9845 is a very high-quality and rened midbass clarity, while still maintaining
midrange driver. It utilizes a very lightweight great dynamics. The truncated frame
diaphragm to achieve extended upper end makes this woofer great for multi-
response and a high sensitivity. The voice coil driver systems, and when used with
does not employ ferrouid cooling, but a vented the shielded counterpart it can be part
aluminum former increases power handling. A of an amazing home theater system.
precisely damped rear chamber helps control the
resonance for easier crossover design and better low frequency extension. This Specifications: • Power handling: 70 watts RMS/100 watts max • VCDIA: 1-1/2"
is a great midrange driver for a variety of three-way applications. • Le: .32 mH • Impedance: 8 ohms • Re: 5.5 ohms • Frequency range: 28-5,000
Hz • Fs: 28 Hz • SPL: 88 dB 2.83V/1m • VAS: 1.77 cu. ft. • QMS: 1.22 • QES: .33
Specifications: • Power handling: 20 watts RMS/30 watts max (full range • QTS: .26 • XMAX: 5.0 mm • Dimensions: A: 7-1/4", B: 6-1/4", C: 3-1/4".
signal) • VCDIA: 2" • Impedance: 8 ohms • Re: 5.8 ohms • Frequency range:
410-8,000 Hz • Fs: 410 Hz • SPL: 92 dB 2.83V/1m • Dimensions: A: 5-7/8", #296- 606 . . . . . . . . . . . . . . . . . . $119.99 LIST $101.19 (1-3) $96.13 (4-UP)
B: 4-1/2", C: 1-3/8".
#276- 620 . . . . . . . . . . . . . . . . . . . . .$84.99 LIST $71.75 (1-3) $68.16 (4-UP) 8948A 7" Carbon Fiber/Paper Woofer
The 8948A woofer is one of Usher’s
8945A 7" Carbon Fiber/Paper Woofer most popular drivers, featuring
The 8945A woofer is one of Usher’s most their low distortion motor system
popular drivers, featuring their low and a carbon ber/paper cone
distortion motor system and a carbon which dampens resonances usually
ber/paper blend cone. High excursion associated with stiff cones. Heavy
capabilities combined with the rigid yet magnet system eliminates modulations
well-damped cone provide powerful bass as well as lowering clipping distortion.
without a harsh midrange. This is one of the Rubber surround along with a progressive
best all-around woofers for traditional 2-way spider helps prevent over excursion. This
bookshelf and compact oor-standing systems. midbass sets the standard for sound
reproduction.
Specifications: • Power handling: 80 watts
RMS/90 watts max • VC DIA: 1-5/8" • Le: .46 mH Specifications: • Power handling: 70 watts RMS/100 watts max • VC DIA: 1-5/8"
• Impedance: 8 ohms • Re: 5.8 ohms • Frequency range: 35-8,000 Hz • Fs: 35 • Le: .39 mH • Impedance: 8 ohms • Re: 5.8 ohms • Frequency range:
Hz • SPL: 87 dB 2.83V/1m • VAS: 1.21 cu. ft. • QMS: 1.96 • QES: .37 • QTS: .31 45-5,000 Hz • Fs: 45 Hz • SPL: 87 dB 2.83V/1m • VAS: .69 cu. ft. • QMS: 2.43
• XMAX: 6.0 mm • Dimensions: A: 7", B: 5-5/8", C: 3-1/16". • QES: .45 • QTS: ..38 • XMAX: 6.0 mm • Dimensions: A: 7", B: 5-5/8", C: 3-1/4".
#296- 600 . . . . . . . . . . . . . . . . . $129.99 LIST $110.39 (1-3) $104.87 (4-UP) #296- 603 . . . . . . . . . . . . . . . . . $ 1 3 9 . 9 9LIST $117.56 (1-3) $110.67 (4-UP)
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
205 59/62
7/23/2019 Speacher building.pdf
Speaker Building
Drivers
)
n
o
t
Experience High Definition Bass! w
e
N
1
• Crystal clear bass • Broad frequency response e
r
B
• Superb accuracy • Easy installation d
(
e
c
r
• Overload protection o
F
BEAM™ transducer creates sound through vibration transfer instead of pressuring the air around you.
The energy is delivered so cleanly that the brain interprets the stimulus as Sound, not Shaking™. With an
I BEAM™ tra nsducer installed, you can experience High Denition Bass™. Includes I BEAM™, mounting
screws, and detailed instructions.
Review at audioholics.com
“The Sonic Immersion Technologies I BEAM VT-300 transducer is a remarkable product. Its powerful tactile performance,
speed, and accuracy place this transducer among the finest we have evaluated to date. The VT-300’s low profile and
mounting configuration make it a perfect choice for chairs and recliners that have mechanical obstructions preventing
conventional mounting options. The I BEAM VT-300 is very efficient and doesn’t require a lot of power to generate huge
amounts of vibro-tactile action, even a modest integrated amplifier or old unused receiver can be used for power. The I BEAM
VT-300 generated huge amounts of WOW effect and added another dimension to our home theater listening experience,
utilizing the proper crossover setting and calibration. We don’t recommend using the I BEAM transducer when listening to
audiophile type music. But, if you’re in party mode, give it a try - you may like the experience. The I BEAM VT-300’s excellent build quality and high performance-to-price ratio
make it an easy recommendation.” By Ray Adkins (owner of RLA Home Theater and contributing staff writer)
Specifications: • Power handling: 100 watts RMS/250 watts max • Frequency range: 20-800 Hz • Impedance: 4 ohms • Force: 2.2 lbs./watt (9.7 Newtons/watt)
• Dimensions: 6-1/2" L x 4-1/8" W2-3/4" H.
#300- 920 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $399.99 LIST $349.99 EACH
In movie theaters, the action jumps off the screen, the soundtrack comes to life and the entire experience is intensied. Bass Shakers hook up like a speaker and can
be easily mounted directly to standard in-home theater seats.
Specifications: • Power handling: 50 watts RMS/100 watts max • Impedance: 4 ohms • Usable frequency response: 20 to 80 Hz • Fs: 40 Hz
• Peak force: 30 lbs. per ft. • Dimensions: 6.2" Dia. x 2.5" H.
#299- 028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.99 LIST $38.88 EACH
206
http://slidepdf.com/reader/full/speacher-buildingpdf
1-800-338-0531 60/62
7/23/2019 Speacher building.pdf
Speaker Building
Drivers
Tactile Sound™ has been the leader in design and production of tactile transducers for over 10 years. Their unique
products are designed to provide the best possible sensory experience and take music and movie listening to another level. Using the latest in
engineering and materials, their products have continually improved into a complete line of one-of-a-kind transducers. Whether you are constructing a
home theater, building a garden sound system, or adding sound to your swimming pool, Tactile Sound™ has a product that can enhance your experience.
Isolation Feet
The Tactile Sound rubber isolation feet are designed to substantially improve the performance of the home theater transducers. When attached
under the legs of sofas and chairs, the furniture is decoupled from the floor, which concentrates the vibrational forces into the seats. At the
same time, extraneous sound transmission into neighboring rooms or apartments is drastically reduced.
TI-100 Isolation Foot TI-200 Isolation Mount TI-300 Neoprene
• Low-prole rubber foot • Extra-tall rubber foot Isolation Mount
works with furniture provides increased
• Ultimate isolation and
that needs minimal transducer clearance
performance
extra clearance for when using low-prole
• Included L-bracket
transducer mounting furniture allows custom
• Dimensions: 2-1/2" dia. • Dimensions: 2-3/8" x
installation
x 1" H 3-7/8" base, 1-3/4" H
• Dimensions: 4" x 4" base, 1-3/4" ta ll
#300- 876 . . . . . . . . . . . . . . . . . . . . $4.95 EACH #300-874 . . . . . . . . . . . . . . . . . . . . . $29.95 EACH #300- 872 . . . . . . . . . . . . . . . . . . . $59.95 EACH
parts-express.com
http://slidepdf.com/reader/full/speacher-buildingpdf
207 61/62
7/23/2019 Speacher building.pdf
Speaker Building Bohlender Graebener Corporation
Drivers BG Corp is a world leader in the manufacture
of planar magnetic transducers, having
models suitable for wide range, midrange,
RD Series Planar Transducers
or tweeter applications. These drive units
The advantages of planar line source deliver ultimate clarity, detail, accuracy and,
transducers are well known, notably a above all, the pure pleasure of realizing true
vastly expanded soundstage, improved
sound. Exclusively distributed in the U.S. by
stereo imaging, controlled vertical
dispersion (which eliminates annoying Parts Express.
reections of sound from oors and
ceilings), and very low distortion. The RD40 Planar Transducer
drivers are capable of reproducing Specifications: • Power handling: 50 watts RMS/200 watts max • Nominal
sound over 7 octaves, with an Impedance: 5 ohms • Re: 5.0 ohms • Frequency range: 150-18,500 Hz • SPL: 88
SPL that drops with distance at dB 2.83V/1m • Dimensions: 40" L x 4-11/16" W x 1-1/2" D.
half the rate (-3 dB per doubling
of distance) of a conventional #264- 706 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $695.00 LIST $489.50 EACH
dynamic driver (-6 dB). The
dipole nature of the RD48 Planar Transducer
RD series gives you
Specifications: • Power handling: 70 watts RMS/270 watts max • Nominal
the exibility to use
Impedance: 4 ohms • Re: 4.0 ohms • Frequency range: 150-18,500 Hz
them however you
• SPL: 88 dB 2.83V/1m • Dimensions: 48" L x 6" W x 1-1/2" D.
want for speakers
with great imaging, #264- 704 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $900.00 LIST $650.00 EACH
a wide sweet spot,
and effortless musical RD50 Planar Transducer
reproduction.
Specifications: • Power handling: 70 watts RMS/270 watts max • Nominal
The long length of Impedance: 4 ohms • Re: 4.0 ohms • Frequency range: 150-18,500 Hz • SPL: 88
the elements not only improves the line-source dB 2.83V/1m • Dimensions: 51-1/2" L x 4-11/16" W x 1-1/2" D.
behavior, but also provides a large radiating
surface area for improved lower end response #264- 702 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $750.00 LIST $566.50 EACH
and heat dispersion. The RD75 can be used as
low as 150 Hz with the proper crossover. Built RD75 Planar Transducer
on a chassis of heavy-gauge powder-coated
Specifications: • Power handling: 100 watts RMS/400 watts max • Nominal
steel, they are rened in musical performance yet
Impedance: 6 ohms • Re: 6.0 ohms • Frequency range: 150-18,500 Hz
physically robust and durable. Meanwhile, the
• SPL: 88 dB 2.83V/1m • Dimensions: 75-5/8" L x 4-11/16" W x 1-1/2" D.
purely resistive load of the elements is very easy
on ampliers and simplies crossover design. #264- 700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $995.00 LIST $753.50 EACH
http://slidepdf.com/reader/full/speacher-buildingpdf 62/62