Professional Documents
Culture Documents
www.duckworth-and-kent.com
Duckworth & Kent
All schematic line drawings, photographs and copy in this catalogue are fully protected by copyright.
No part of this catalogue may be reproduced in any form without written permission of Duckworth
& Kent Ltd. Duckworth & Kent Ltd., reserves the right to make changes at any time, without notice,
in product specification and availability. Schematic line drawings and photos may vary from actual
size. Tip drawings are shown enlarged. Descriptive, typographic, or photographic errors are subject to
correction. Name(s) of instruments are often comprised of a surgeon’s name, combination of surgeons’
names or DK’s name together with the category of the instrument. “DK” is used in this catalogue to
identify Duckworth & Kent. Arrow indicates view at point.
D&K® is a registered trademark of Duckworth & Kent Ltd. All other brand names are trademarks or
registered trademarks of their respective owners.
It has never been easier to stay in touch with Duckworth & Kent.
For further information on our current range of ophthalmic instrumentation and services visit
www.duckworth-and-kent.com
or contact us:
Email: info@duckworth-and-kent.co.uk
Website: www.duckworth-and-kent.com
CONTENTS
1 Scissors 5-10
2 Forceps 13-70
I Index 205-210
TITANIUM INSTRUMENTS
MANUFACTURED IN ENGLAND
Scissors
Capsule, Capsulotomy
Conjunctival
Corneal & Corneal Section
Iris
IOL Cutter
Retinal
Utility & Westcott
Vannas
2014
Duckworth & Kent
Scissors - Conjunctival
5 2014 Catalogue
www.duckworth-and-Kent.com
Barrett Corneal Scissors, Curved
1-223
• Blunt tips, curved blades
• Universal cutting blades
• Cut length 6mm, tip to pivot length 11mmm
mm
• Barrett balanced set handle, length 120mm
• Distinctive identification labelling
Designed for penetrating keratoplasty, or for surgeons who may require Scissors for enlargement of cataract incision.
Scissors - Iris
DK Iris Scissors, Straight
1-210
• Sharp tips, straight blades
• Cut length 5mm, blade length 11mm
• Round handle, length 107mm
2014 Catalogue 6
Duckworth & Kent
IOL Cutters
Tips of the the Osher Haptic Cutter have a notch that fits over and grasps the haptic (fig1). When the handle of the Osher Haptic
Cutter is squeezed (fig2 - 3) the outside tube of the tip moves forwards and severs the haptic.
All fixed head vitreoretinal forceps and scissors are supplied with a protective guard which can be sterilised.
7 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 8
Duckworth & Kent
Fine blades, designed with sufficient length, suitable for iridectomy, iridotomy, sphincterotomy as well as cutting 10.0 nylon suture.
9 2014 Catalogue
www.duckworth-and-Kent.com
Scissors - Vannas
2014 Catalogue 10
TITANIUM INSTRUMENTS
MANUFACTURED IN ENGLAND
Forceps
Capsulorhexis
Cilia
Clamps
Conjunctival
Corneal
Flap Lifting / Utility
Intraocular Lens
Muscle
Notched / Pierse
Nucleus Cracking & Prechopping
Plain Tip
Retinal
Toothed
Tissue / Dressing
Tying
Miscellaneous
2014
Duckworth & Kent
13 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 14
Duckworth & Kent
15 2014 Catalogue
www.duckworth-and-Kent.com
1.5mm
0.9mm
• Blunt serrated interlocking tips • Cross action tips, 1.5mm width at pivot box
• Curved shaft • Tips angled 45° to handle
• Tip to pivot point 11mm • Flat handle, overall length 120mm
When entering through a corneal incision the increased curvature of forceps shafts prevent corneal deformation during use. The
smooth blunt tips ensure easy entry.
1.5mm
0.9mm
• Blunt serrated interlocking tips • Cross action tips, 1.5mm width at pivot box
• Curved shaft • Tips angled 45° to handle
• Tip to pivot point 11mm • Round handle, overall length 120mm
When entering through a corneal incision the increased curvature of forceps shafts prevent corneal deformation during use. The
smooth blunt tips ensure easy entry.
1.5mm
0.9mm
• Pointed serrated interlocking tips • Cross action tips, 1.5mm width at pivot box
• Curved shaft • Tips angled 45° to handle
• Tip to pivot point 11mm • Flat handle, overall length 120mm
When entering through a corneal incision the increased curvature of forceps shafts prevent corneal deformation during use. The
pointed tips puncture the anterior capsule in initiating the tear.
1.5mm
0.9mm
When entering through a corneal incision the increased curvature of forceps shafts prevent corneal deformation during use. The
pointed tips puncture the anterior capsule in initiating the tear.
11mm
1.5mm
0.9mm
When entering through a corneal incision the increased curvature of forceps shafts prevent corneal deformation during use. The
forceps are available with either sharp pointed tips or smooth blunt tips, both have serrated interlocking platforms.
2014 Catalogue 16
Duckworth & Kent
2-2-716G-6 Inamura Flat Handle Capsulorhexis Forceps, Suitable For Scleral Tunnel Incision
11mm
1.5mm
0.9mm
2-2-716G-6S Inamura Short Flat Handle Capsulorhexis Forceps, Suitable For Scleral Tunnel Incision
11mm
1.5mm
0.9mm
2-2-716G-6R Inamura Round Handle Capsulorhexis Forceps, Suitable For Scleral Tunnel Incision
11mm
1.5mm
0.9mm
2-2-716G-6RS Inamura Short Round Handle Capsulorhexis Forceps, Suitable For Scleral Tunnel Incision
11mm
1.5mm
0.9mm
17 2014 Catalogue
www.duckworth-and-Kent.com
2-2-716G-7 Inamura Flat Handle Capsulorhexis Forceps, Suitable For Corneal Incision
10mm
1.5mm
0.9mm
2-2-716G-7S Inamura Short Flat Handle Capsulorhexis Forceps, Suitable For Corneal Incision
10mm
1.5mm
0.9mm
2-2-716G-7R Inamura Round Handle Capsulorhexis Forceps, Suitable For Corneal Incision
1.5mm
0.9mm
Inamura Short Round Handle Capsulorhexis Forceps, Suitable For Corneal Incision
2-2-716G-7RS
10mm
1.5mm
0.9mm
2014 Catalogue 18
Duckworth & Kent
2.5mm 1.5mm
0.9mm
• Pointed serrated interlocking tips • Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Curved shaft, tip to pivot point 11mm • Tips angled 45° to handle
• Cross action tips, 1.5mm width at pivot box • Flat handle, overall length 120mm
2.5mm 1.5mm
0.9mm
2.5mm 1.5mm
0.9mm
2.5mm 1.5mm
0.9mm
• Pointed serrated interlocking tips • Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Curved shaft, tip to pivot point 11mm • Tips angled 45° to handle
• Cross action tips, 1.5mm width at pivot box • Short round handle, overall length 92mm
2.5mm 1.5mm
0.9mm
• Pointed serrated interlocking tips • Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Curved shaft, tip to pivot point 10mm • Tips angled 45° to handle
• Cross action tips, 1.5mm width at pivot box • Flat handle, overall length 119mm
19 2014 Catalogue
www.duckworth-and-Kent.com
2.5mm 1.5mm
0.9mm
• Pointed serrated interlocking tips • Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Curved shaft, tip to pivot point 10mm • Tips angled 45° to handle
• Cross action tips, 1.5mm width at pivot box • Short flat handle, overall length 91mm
2.5mm 1.5mm
0.9mm
• Pointed serrated interlocking tips • Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Curved shaft, tip to pivot point 10mm • Tips angled 45° to handle
• Cross action tips, 1.5mm width at pivot box • Round handle, overall length 119mm
2.5mm 1.5mm
0.9mm
• Pointed serrated interlocking tips • Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Curved shaft, tip to pivot point 10mm • Tips angled 45° to handle
• Cross action tips, 1.5mm width at pivot box • Short round handle, overall length 91mm
Jones - Inamura Flat Handle Capsulorhexis Forceps, Suitable For Scleral Tunnel Incision
2-2-716G-10
11mm
Video available on website
6mm duckworth-and-kent.com/media
1mm 1.5mm
0.9mm
• Pointed serrated interlocking tips • Cross action tips, 1.5mm width at pivot box
• Curved shaft, tip to pivot point 11mm • Tips angled 45° to handle
• Marks on shaft every 1mm from tip to 6mm • Flat handle, overall length 120mm
Accurate capsulorhexis size is crucial for optimal IOL function. Dr Jones has utilised the Inamura cross action capsulorhexis forceps
by adding an engraved scale from the tip to 6.0mm along the shaft. The scale is in 1.0mm increments and enables the surgeon to
repeatedly measure the size of the capsulorhexis using the forceps within the anterior chamber. Measuring on the cornea surface
overestimates the actual size of the capsulorhexis when measured within the anterior chamber.
Jones - Inamura Round Handle Capsulorhexis Forceps, Suitable For Scleral Tunnel Incision
2-2-716G-10R
11mm
6mm
1mm 1.5mm
0.9mm
• Pointed serrated interlocking tips • Cross action tips, 1.5mm width at pivot box
• Curved shaft, tip to pivot point 11mm • Tips angled 45° to handle
• Marks on shaft every 1mm from tip to 6mm • Round handle, overall length 120mm
Accurate capsulorhexis size is crucial for optimal IOL function. Dr Jones has utilised the Inamura cross action capsulorhexis forceps
by adding an engraved scale from the tip to 6.0mm along the shaft. The scale is in 1.0mm increments and enables the surgeon to
repeatedly measure the size of the capsulorhexis using the forceps within the anterior chamber. Measuring on the cornea surface
overestimates the actual size of the capsulorhexis when measured within the anterior chamber.
2014 Catalogue 20
Duckworth & Kent
10.0mm 8.5mm
2.5mm 1.2mm
0.9mm
• Sharp pointed serrated tips • Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.2mm width at pivot box • Tips angled 45° to handle
• Curved shaft, tip to pivot point 8.5mm • Flat handle, overall length 111mm
2.5mm 1.2mm
0.9mm
• Extra sharp pointed serrated tips angled 80° from shaft • Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.2mm width at pivot box • Flat handle, overall length 111mm
• Curved shaft, tip to pivot point 8.5mm
2.5mm 1.2mm
0.9mm
• Sharp pointed serrated tips angled 45° from shaft • Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.2mm width at pivot box • Flat handle, overall length 111.5mm
• Curved shaft, tip to pivot point 9.5mm
2.5mm 1.2mm
0.9mm
• Sharp pointed serrated tips • Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.2mm width at pivot box • Tips angled 45° to handle
• Curved shaft, tip to pivot point 8.5mm • Round handle, overall length 111mm
21 2014 Catalogue
www.duckworth-and-Kent.com
2.5mm 1.2mm
0.9mm
• Sharp pointed serrated tips • Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.2mm width at pivot box • Tips angled 45° to handle
• Curved shaft, tip to pivot point 8.7mm • Round handle, overall length 111mm
2.5mm 1.2mm
0.9mm
• Extra Sharp pointed serrated tips angled 90° from shaft • Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.2mm width at pivot box • Shaft angled 45° to handle
• Curved shaft, tip to pivot point 8.5mm • Round handle, overall length 111mm
Cross section of jaws are flattened vertically providing a rectangular cross section which strengthens forceps in horizontal plane,
minimizes incision gape and loss of viscoelastic during capsulorhexis. Jaws maintain consistent alignment of tips.
Cross point of instrument is in corneal or scleral tunnel while performing capsulorhexis so it does not gape wound. Prevents
leakage of viscoelastic from anterior chamber.
2-716G Inamura Capsulorhexis Forceps, Scleral Tunnel Incision; Serrated Tips Designed To Interlock
• Serrated tips
• Curved shafts, tip to curve length 14mm
• 1.5mm diameter shaft at cross junction
• Flat cross action handle, length 105mm
2014 Catalogue 22
Duckworth & Kent
2-716G-2 Inamura Capsulorhexis Forceps, Corneal Incision; Serrated Tips Designed To Interlock
• Serrated tips
• Curved shafts, tip to curve length 13mm
• 1.5mm diameter shaft at cross junction
• Flat cross action handle, length 104.5mm
2-716G-5 Inamura Capsulorhexis Forceps, Scleral Tunnel Incision; Serrated Tips Designed To Interlock
• Fine pointed tips with platforms • Squeeze action activates both jaws
• 0.9mm tip opening • Round squeeze handle, length 118.5mm
• Curved 22 gauge tube
23 2014 Catalogue
www.duckworth-and-Kent.com
Cilia / Epilation
2014 Catalogue 24
Duckworth & Kent
Clamps
• Length 91mm
• Exposure of the surgical site using chalazion clamp principles
• Externalised suturing facilitated by absence of base plate
• Ambidextrous - clamp can be used on right & left eyelids
• Anatomical opposition is overcome
- marginal artery-clamping ensures haemostasis
- canalicular apparatus-calibrated shaft protects canaliculus
• Non slip teeth ensure the clamp does not move during the procedure
• The millimeter scale allows the surgeon to work well away from the canaliculus
• The open loop on the bottom of the clamp allows quick release of the clamp when an externalised suture is used
• The clamp incorporates a ‘Canalicular/lid margin friendly curve’ which reduces the lid crush seen when Chalazion clamps are used.
25 2014 Catalogue
www.duckworth-and-Kent.com
For upper eyelid fixation and globe protection in carbon dioxide laser upper lid blepharoplasty.
Designed to hold and protect ‘free’ edge of conjunctival flap created in trabeculectomy.
2014 Catalogue 26
Duckworth & Kent
27 2014 Catalogue
www.duckworth-and-Kent.com
• 0.2mm, 1 x 2 teeth
• Tip length 1.5mm
• 4.5mm highly textured tying platforms
• Colibri style shafts
• Micro flat handle, length 76.5mm
2014 Catalogue 28
Duckworth & Kent
Colibri, Notched
Colibri, Tying
Colibri, Plain
Conjunctival
29 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 30
Duckworth & Kent
• Textured tips
• Grooved channel along platform length, stopping just before tip
• Straight shafts
• Flat handle, length 85mm
Features:
Can be used for pterygium surgery
Grooved channel down centre of platform helps reduce the amount of dried blood on tips
Also used for tying 8-0 suture with its lateral platform
31 2014 Catalogue
www.duckworth-and-Kent.com
Corneal
2014 Catalogue 32
Duckworth & Kent
• Blades closed at rest and tips open when forceps are squeezed
d • Sh
Sharp outer edges
d to blades
bl d
• Tip end to pivot box length 11mm • Blades have slight curve
• 40° angled shafts • Width at tip when blades closed 2mm
• Reverse action style handle, length 98mm • Height at middle of blades 0.8mm
• Forceps tips act as dissecting blades
Flap Lifting
Designed with shortened, small flat ring tips for removal of contact lens at slit lamp biomicroscope. Useful contact lens removal
following PRK and other refractive surgical procedures.
Gland Pressing
33 2014 Catalogue
www.duckworth-and-Kent.com
• 6mm platforms
• 45° angled shafts, tip to angle length 11mm
• Cross action handle, length 102mm
Conducive for upward folding. Highly polished inner jaw surface protects from scratching. Designed specifically for AcrySof
approved by Alcon.
Conducive for upward folding. Highly polished inner jaw surface protects from scratching. Designed specifically for AcrySof
approved by Alcon.
2014 Catalogue 34
Duckworth & Kent
35 2014 Catalogue
www.duckworth-and-Kent.com
• Small raised disc on inner face of jaw with matting hole • 20 gauge, 32.5mm long straight shaft
• Tips angled at 15° • Round squeeze handle, length 138mm
• Squeeze action handle activates both jaws Suitable for ICL lens manipulation and Donor Disk
manipulation for DSEK
2014 Catalogue 36
Duckworth & Kent
2-896-2 Small Incision ICL Manipulating Forceps, Angled Flat Disc Tips
• Flat tip, 1.9mm wide disc with platform • 20 gauge, 32.5mm long straight shaft
• Tips angled at 10° • Round squeeze handle, length 138.5mm
• Squeeze action handle activates both jaws Designed for delivering ICL lens
2-896-3 Small Incision ICL Manipulating Forceps, Angled Flat Disc Tips
• Flat tip, 1.9mm wide disc with platform • Corresponding gold star on handle, relates to gold tip
• Upper disc coloured gold for orientation reference • Squeeze action handle activates both jaws
• Tips angled at 15° • 20 gauge, 32.5mm long straight shaft
• Round squeeze handle, length 139mm
• For loading AcrySoft IOL into the MONARCH II and III cartridges
• Highly polished tips protects from scratching the lens surface
• Round handle, length 122mm
The DK7717 Lens Loading Forceps are used to the load the IOL into the cartridge. To ensure a successful IOL delivery and
implantation, proper loading of the IOL into the cartridge is essential.
37 2014 Catalogue
www.duckworth-and-Kent.com
• For loading the TECNIS® 1-Piece IOL into the One Series™ Ultra Cartridge
• Polished tips protects from scratching the lens surface
• A stop ensures the IOL is not advanced beyond the recommended position in the cartridge
• Round handle, length 113.5mm
The DK7726 Lens Loading Forceps are used to load the AMO TECNIS® 1-Piece IOL into the AMO One Series Ultra Cartridge. To ensure
a successful IOL delivery and implantation, correct loading and setting of the IOL into the cartridge is essential.
• For loading the TECNIS® 1-Piece IOL into the One Series™ Ultra Cartridge
• Polished tips protects from scratching the lens surface
• A stop ensures the IOL is not advanced beyond the recommended position in the cartridge
• Flat handle, length 113.5mm
2014 Catalogue 38
Duckworth & Kent
Muscle
• 0.5mm, 1 x 2 teeth
• 45° angled shafts, tip to angle length 10mm
• Flat handle, length 113mm
39 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 40
Duckworth & Kent
41 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 42
Duckworth & Kent
Atraumatic skin handling forceps utilised in carbon dioxide laser blepharoplasty to minimize ecchymosis.
Designed to crack nucleus into four segments with minimal stretching of incision. Forceps shafts open to a maximum of 1.7mm at
incision point. Tips open to 2.5mm. Tip of instrument has a sharp point that initally penetrates nucleus; squeeze forceps, tips open to
crack and split nucleus. By flipping forceps over, blunt edge may be used to go deeper in initial split to fully split nucleus. Using blunt
edge of tip reduces risk of damaging posterior capsule.
blunt edge
• Tips fully open to 2.5mm
• Flattened tips in vertical plane, tip height
ghtt 1
gh 1.3mm
.3mm
3mm
rp
edge • 1.7mm maximum width at incision point
sha
• Straight shafts, reverse cross action style Video available on website
• Round handle, length 123mm duckworth-and-kent.com/media
43 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 44
Duckworth & Kent
Retinal
• Fine end gripping tips, tip length 3.7mm • Squeeze handle activates both jaws
• Straight 20 gauge tube, tube length 32.5mm • Round squeeze handle, overall length 141mm
• Delicate serrated jaws with blunt tip, tip length 3mm • Squeeze handle activates both jaws
• Straight 20 gauge tube, tube length 32.5mm • Round squeeze handle, overall length 138.5mm
45 2014 Catalogue
www.duckworth-and-Kent.com
• 2.mm jaws, 0.7mm platforms, 55° angled pointed picking tips • Squeeze action activates both jaws
• Straight 20 gauge tube, tube length 32.5mm • Round squeeze handle, length 138mm
• Fine end gripping tips, tip length 3mm • Squeeze handle activates both jaws
• Straight 23 gauge tube, tube length 32.5mm • Round squeeze handle, overall length 140mm
• Delicate serrated jaws with blunt tip, tip length 3mm • Squeeze handle activates both jaws
• Straight 23 gauge tube, tube length 32.5mm • Round squeeze handle, length 139mm
• Asymmetrical tip design with fine platform • Squeeze handle activates both jaws
• Straight 23 gauge tube, tube length 32.5mm • Round squeeze handle, length 138.5mm
• 2mm smooth rounded tips • Detachable tip heads for cleaning purposes
• Straight 20 gauge tube, length 31mm • Colour coding for tip and gauge size identification
• Requires DK Squeeze Handle, ref 6-676 • Once attached to round squeeze handle, length is 143mm
• 3.7mm smooth rounded tips • Detachable tip heads for cleaning purposes
• Straight 20 gauge tube, length 31mm • Colour coding for tip and gauge size identification
• Requires DK Squeeze Handle, ref 6-676 • Once attached to round squeeze handle, length is 145mm
• Delicate serrated jaws with blunt tip, tip length 3mm • Detachable tip heads for cleaning purposes
• Straight 20 gauge tube, length 31mm • Colour coding for tip and gauge size identification
• Requires DK Squeeze Handle, ref 6-676 • Once attached to round squeeze handle, length is 144mm
2014 Catalogue 46
Duckworth & Kent
• 2mm jaws, 0.7mm platforms, 55° angled • Detachable tip heads for cleaning purposes
pointed picking tip • Colour coding for tip and gauge size identification
• Straight 20 gauge tube, length 31mm • Once attached to round squeeze handle, length is 143mm
• Requires DK Squeeze Handle, ref 6-676
• Fine end gripping tips, tip length 3mm • Detachable tip heads for cleaning purposes
• Straight 23 gauge tube, length 31mm • Colour coding for tip and gauge size identification
• Requires DK Squeeze Handle, ref 6-676 • Once attached to round squeeze handle, length is 145mm
• Delicate serrated jaws with blunt tip, tip length 3.5mm • Detachable tip heads for cleaning purposes
• Straight 23 gauge tube, length 31mm • Colour coding for tip and gauge size identification
• Requires DK Squeeze Handle, ref 6-676 • Once attached to round squeeze handle, length is 145mm
• 2mm jaws, 0.7mm platforms, 55° angled • Detachable tip heads for cleaning purposes
pointed picking tip • Colour coding for tip and gauge size identification
• Straight 23 gauge tube, length 31mm • Once attached to round squeeze handle, length is 143mm
• Requires DK Squeeze Handle, ref 6-676
All Interchangeable Vitreoretinal (VR) Heads are sold separate from the handle. The VR Heads require a handle for
operation. ONLY the DK Squeeze Handle for VR Instrument Heads, ref 6-676, is suitable. All VR Heads come fitted with
a plastic (PEEK) re-usable Protective Cover, that can withstand cleaning and reprocessing cycles. The VR Heads are
screwed onto the thread of DK Squeeze Handle for VR Instrument Heads. It is recommended, for device protection, to
keep the plastic (PEEK) re-usable protective cover fitted until the instrument is required for use.
47 2014 Catalogue
www.duckworth-and-Kent.com
Reverse action allows forceps to securely hold the cannula when the handle is at rest, by squeezing the handle the cannula is released.
Toothed, 0.1mm
2014 Catalogue 48
Duckworth & Kent
Toothed, 0.12mm
49 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 50
Duckworth & Kent
51 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 52
Duckworth & Kent
53 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 54
Duckworth & Kent
Toothed, 0.2mm
55 2014 Catalogue
www.duckworth-and-Kent.com
Toothed, 0.3mm
2014 Catalogue 56
Duckworth & Kent
Toothed, 0.5mm
57 2014 Catalogue
www.duckworth-and-Kent.com
• 0.5mm, 1 x 2 teeth
• 45° angled shafts, tip to angle length 10mm
0mm
• Flat handle, length 113mm
2014 Catalogue 58
Duckworth & Kent
• Serrated tips
• Straight shafts
• Flat handle, length 115.5mm
59 2014 Catalogue
www.duckworth-and-Kent.com
Tying Angled
2014 Catalogue 60
Duckworth & Kent
61 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 62
Duckworth & Kent
2-524-1 DK Kelman McPherson Angled Tying Forceps, 10.5mm platforms and tip to bend
2-526 DK Kelman McPherson Sheets Angled Tying Forceps, 12mm tip to bend
63 2014 Catalogue
www.duckworth-and-Kent.com
Tying, Colibri
2014 Catalogue 64
Duckworth & Kent
Tying, Curved
65 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 66
Duckworth & Kent
Tying, Straight
67 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 68
Duckworth & Kent
69 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 70
TITANIUM INSTRUMENTS
MANUFACTURED IN ENGLAND
Needle Holders
Jaw Length 7mm
Jaw length 9mm
Jaw Length 10mm
Jaw Length 12mm
Jaw Length 13mm
2014
Duckworth & Kent
Needle Holders
The locking feature is available within the range enabling the needle
holder to be transferred with needle locked in the jaws.
73 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 74
Duckworth & Kent
75 2014 Catalogue
www.duckworth-and-Kent.com
2014 Catalogue 76
Duckworth & Kent
77 2014 Catalogue
www.duckworth-and-Kent.com
Designed for large sutures with an inbuilt edge at distal end of jaw to allow surgeon to cut suture without changing instruments.
Jaws of needle holder are large enough to bend a 26 gauge needle for capsulorhexis.
2014 Catalogue 78
TITANIUM INSTRUMENTS
MANUFACTURED IN ENGLAND
Diamond Knives
Straight Retractable
Angle Retractable
Position Handle
Micrometer
LRI
2014
Duckworth & Kent
Straight R e t ra c t a b l e
Angled R e t ra c t a b l e
• Angled mounting of the blade makes it easier to guide the cutting edge through the cornea
Position R e t ra c t a b l e
• Up to 7 fixed blade depths are set and can be selected by turning the handle
M icrometer R e t ra c t a b l e
Triple Edge
Arcuate
Trifacet
Spear
Tip
Spear wirh Side Cutting
Tapered Spear
Cresent
Dome
Lance
Spear
81 2014 Catalogue
www.duckworth-and-Kent.com
width 1mm
length 3.5mm
thickness 0.2mm
width 1mm
length 3.5mm
thickness 0.2mm
width 1mm
length 3.5mm
thickness 0.2mm
width 1mm
length 3.5mm
thickness 0.2mm
width 1mm
length 3.5mm
thickness 0.2mm
width 1mm
length 3.5mm
thickness 0.2mm
2014 Catalogue 82
Duckworth & Kent
width 1.4mm
length 3.5mm
thickness 0.2mm
width 0.8mm
length 2.5mm
thickness 0.2mm
width 1mm
length 2.5mm
thickness 0.2mm
width 1.2mm
length 4mm
thickness 0.2mm
width 1.4mm
length 3.5mm
thickness 0.2mm
width 1.8mm
length 4mm
thickness 0.2mm
83 2014 Catalogue
www.duckworth-and-Kent.com
width 1.8mm
length 4mm
thickness 0.2mm
4-404 DK Angled Retractable Diamond Knife, 1.8mm Spear with Chamfered Edges
width 1.8mm
length 4mm
thickness 0.2mm
width 2mm
length 4mm
thickness 0.2mm
width 2.2mm
length 4.1mm
thickness 0.2mm
width 2.2mm
length 4mm
thickness 0.2mm
width 2.4mm
length 4mm
thickness 0.2mm
2014 Catalogue 84
Duckworth & Kent
width 2.5mm
length 4mm
thickness 0.2mm
width 2.5mm
length 4mm
thickness 0.2mm
width 2.8mm
length 4mm
thickness 0.2mm
width 2.7mm/2.9mm
length 4mm
thickness 0.2mm
width 3mm
length 4mm
thickness 0.2mm
width 3mm
length 4mm
thickness 0.2mm
85 2014 Catalogue
www.duckworth-and-Kent.com
width 3.2mm
length 4mm
thickness 0.2mm
4-462 DK Angled Retractable Diamond Knife, 3.2mm Spear with side cutting
width 3.2mm
length 4mm
thickness 0.2mm
width 3mm/3.2mm
length 4mm
thickness 0.2mm
width 0.8mm
length 2mm
thickness 0.2mm
• 0.8mm wide lance diamond blade Four position handle may be used to perform 0.2mm or 0.3mm depth external
• Four preset cutting depths; 0.2, 0.3, 0.5, 5mm incisions for phacoemulsification, whilst full extension position provides a
• Length 128mm lance style blade for paracentesis incision.
width 1mm
length 2.5mm
thickness 0.2mm
width 1mm
length 3.5mm
thickness 0.2mm
2014 Catalogue 86
Duckworth & Kent
width 1mm
length 3.5mm
thickness 0.2mm
width 1mm
length 2mm
thickness 0.2mm
width 1mm
length 3mm
thickness 0.2mm
width 1mm
length 3mm
thickness 0.2mm
5-329-1 Triple Edge Micrometer Diamond Knife, 0.8mm rectangular with vertical cutting edges
width 0.8mm
length 3.5mm
thickness 0.2mm
87 2014 Catalogue
www.duckworth-and-Kent.com
5-330-1 Thornton Triple Edge Micrometer Diamond Knife, 1mm rectangular with vertical
width 1mm
length 3mm
thickness 0.2mm
• 1mm wide triple edge diamond blade • One division on the scale is 10 microns
• Micrometer handle, length 105mm • One revolution of the barrel is 500 microns
5-331-1 Barrett 4 Edge Vertical Cutting Micrometer Diamond Knife, 1mm wide 4 edge vertical diamond blade
width 1mm
length 3mm
thickness 0.2mm
• 1mm wide 4 edge diamond blade • One division on the scale is 10 microns
• Micrometer handle, length 105mm • One revolution of the barrel is 500 microns
width 1mm
length 3mm
thickness 0.2mm
width 1mm
length 3mm
thickness 0.1mm
• 1mm triple edge arcuate diamond blade • One division on the scale is 10 microns
• 0.1mm (100 microns) blade thickness • One revolution of the barrel is 500 microns
• Micrometer handle, length 105mm
Blade Depth Setting Instructions 5-300-1, 5-310-1, 5-329-1, 5-330-1, 5-331-1, 5-340-1, 5-360-1
100
0
0
TO SET THE BLADE DEPTH If a blade depth of 600 microns is required, the main scale on the barrel will need to be set at 500 microns
and the secondary scale on the thimble will need to be set at 100 microns. The addition of the 2 scales will give the correct depth
2014 Catalogue 88
Duckworth & Kent
width 0.5mm
length 3.5mm
thickness 0.1mm
• 0.5mm triple edge arcuate diamond blade • Micrometer handle, length 105mm
• 0.2mm (200 microns) flat at tip • One division on the scale is 10 microns
• Upper side facet, 0.2mm (200 microns) in length • One revolution of the barrel is 500 microns
• 0.1mm (100 microns) blade thickness
100
0
0
0
THIMBLE Secondary Scale 1 Division = 10 Microns
(1 Division = 0.01mm (10 Microns))
(1 Revolution = 0.5mm (500 Microns))
TO SET THE BLADE DEPTH If a blade depth of 600 microns is required, the main scale on the barrel will need to be set at 500 microns
and the secondary scale on the thimble will need to be set at 100 microns. The addition of the 2 scales will give the correct depth
89 2014 Catalogue
www.duckworth-and-Kent.com
4-620 Wallace LRI Diamond Knife, 1mm Lance (600 micron preset blade depth) Ref x (Blade preset depth)
(550 micron preset blade depth) 4-620-2 550 microns
4-620-2
(500 micron preset blade depth) 4-620-3 500 microns
4-620-3 (450 micron preset blade depth) 4-620-4 450 microns
4-620-4
0.2
width 1mm
x length 0.6mm
thickness 0.2mm
• 0.2mm front flat tip Single footplate allows easier visibility of knife as it passes through corneal tissue.
• Blade preset at 600 micron Handle designed for finger twirling as blade follows arcuate pattern of the limbus.
• Retractable handle, length 121mm
4-621 Packard - Rosen LRI Diamond Knife, 1mm Lance (600 micron preset blade depth)
4-621S DK Short LRI Diamond Knife, 1mm Lance (600 micron preset blade depth)
• 0.2mm front flat at tip Also available in measurments of 500 microns (ref 4-621-3S
• Blade preset at 600 micron
• Footplate designed to fit inside degree marker
• Distance from footplate to centre of diamond blade is 500 microns (0.5mm)
• Retractable long handle, length 50mm
Single footplate allows easier visibility of blade. Profile of footplate locates in the inside of the Packard
LRI degree marker / fixation (9-706 Series) which is used as a guide, giving greater control and a uniform
4-622 Barrett LRI Diamond Knife, 1mm Quadruple (550 micron preset blade depth)
0.2
width 1mm
length 3.5mm
thickness 0.2mm
2014 Catalogue 90
TITANIUM INSTRUMENTS
MANUFACTURED IN ENGLAND
Hooks, Probes
Manipulators &
Miscellaneous
Capsule Polishers
Choppers / Dividers / Hooks / Manipulators / Rotators
Curettes
Depressors
Dissectors
Lacrimal Probes / Dilators
Muscle Hooks
Retractors
Spatulas
Miscellaneous
2014
Duckworth & Kent
Horizontal Chopping
During the Horizontal Chop technique the lens nucleus is held in Enlarged side view Enlarged 3D view Enlarged view looking from above
position using relatively high vacuum by phacoemulsification of the tip of the tip the tip of the chopper
tip buried in the centre of the nucleus. The Horizontal Chopper
is passed under the distal edge of the anterior capsulotomy and
around the lens equator, then drawn through the lens nucleus
toward the phaco handpiece in the horizontal plane. The phaco tip
and chopper are separated laterally, breaking the nucleus into two
pieces. The Horizontal Choppers have a cutting edge which enables Cutting Edge
the chopper to cut through the nucleus in a specific direction.
Cutting direction is backwards
along the shaft of the chopper
6-074-1 Arasaslan Nucleus Chopper and Spatula, designed for left side port
93 2014 Catalogue
www.duckworth-and-Kent.com
6-075-2 Hildebrand/Packard ‘Fat Boy’ Combination Horizontal and Vertical Nucleus Chopper
2014 Catalogue 94
Duckworth & Kent
95 2014 Catalogue
www.duckworth-and-Kent.com
6-083 Hara Nucleus Divider, straight, designed for left side port
6-083-1 Hara Nucleus Divider, curved, designed for left side port
6-083-2 Walker Nucleus Chopper and Manipulator, designed for left side port
Chopper Manipulator
• Curved sharp inner sides of tip, tip length 1mm • 45° angled shafts
• Cutting edge 70° to axis • Tip to angle length 11.5mm
• Tip to angle length 13.5mm • Round handle, Length 131mm
Chopper Manipulator
• Curved sharp inner sides of tip, tip length 1.4mm • Highly polished mushroom rotator
• Cutting edge 70° to axis • 45° angled shaft, tip to angle length 10mm
• Tip to angle length 13.5mm • Round handle, Length 122mm
Smooth tip manipulator is useful as a nucleus rotator / manipulator in four quadrant nucleo fractis techniques.
End of manipulator is ideal for retracting iris during phacoemulsification and inserting IOLs. Nucleus Splitter used
during phacoemulsification techniques such as phaco chop and modified phaco chop procedures.
2014 Catalogue 96
Duckworth & Kent
97 2014 Catalogue
www.duckworth-and-Kent.com
6-086 Inamura Nucleus Divider / Manipulator, designed for right side port
6-086-1 Inamura Nucleus Divider / Manipulator, designed for left side port
6-086-5 Jakobsen Barrett Nucleus Cutter and Rotator, designed for left side port
6-086-6 DK Nucleus Cutter and Repositor, designed for left side port
2014 Catalogue 98
Duckworth & Kent
Vertical chop is a variant of the Horizontal Chop technique in which the chopper is not passed horizontally around the lens equator,
but rather enters the nucleus vertically near the centre of the lens. The Vertical Chop technique benefits from good visualisation of the
chopper throughout the procedure and the avoidance of proximity to the capsular bag, resulting in increased safety.
6-085-2 Barrett Phaco-Axe with Mushroom Rotator, designed for left side port
Rotator Ph
Phaco-Axe
A
• Highly polished mushroom rotator • 0.75 x 0.75mm axe
• 45° angled shaft, tip to angle length 10mm • Axe direction suitable for a right handed surgeon
• Barrett balance handle, length 122mm • 45° angled shaft, tip to angle length 10mm
The Phaco-Axe is a wedge-shaped instrument designed to produce a quick vertical crack of the nucleus during phacoemulsification.
The wedge produces a fracture in the vertical plane of the nucleus along fault lines that exist aligned with the lens. The axe manoeuvre
consists of 4 steps, which occur in rapid sequence so that it appears as one fluid movement.
Step 1. The initial step is to engage the nucleus deeply to at least 50 % of the nuclear thickness. A small amount of phaco energy is
required to embed the nucleus, which is then held with vacuum alone. The phaco tip should not advance significantly beyond the
centre of the nucleus so that there is sufficient space to place the axe in front of the tip.
Step 2. The axe is then moved vertically downwards just in front of and adjacent to the phaco tip to initiate a vertical cleft in the
nucleus.
Step 3. The phaco tip moves in an upward and outward motion separating the segment of nucleus away from the axe, which holds the
remainder of the lens in position and extending the vertical cleft created by the axe into a crack.
Step 4. The final motion is to separate the axe and the phaco tip to propagate the crack through the full thickness of the lens. The
initial crack tends to propagate along the entire lens and is not confined to one quadrant as tends to occur with initial sculpting and
cracking associated with divide and conquer techniques.
After the quick vertical crack the segment is engaged on the phaco tip and is removed with the application of ultrasound energy.
The axe is well suited to rotating the nucleus for the next vertical crack. The entire axe manoeuvre is performed within the margins
of the capsulorhexis unlike horizontal chopping procedures where access to the lens equator under the rhexis is required. High
vacuum levels are therefore not necessary to engage the nucleus as in conventional chopping procedures where the chopper tends
to displace the segment of nucleus from the phaco tip. A mushroom manipulator is better suited for manipulating epinuclear material
and this is provided on the other end of the phaco axe. The technique is well suited to Dual Linear systems where the linear control
of phacoemulsification and aspiration allows the surgeon to simultaneously control these parameters and use just the required
energy and aspiration to embed the phaco tip and remove each segment of nucleus. The Phaco-Axe produces a quick vertical crack
of the nucleus, which allows the surgeon to rapidly fracture and remove a cataract with less energy than conventional nucleofractis
techniques and with greater safety and precision than other chopping manoeuvres.
6-085-4 Barrett Phaco-Axe with Mushroom Rotator, designed for right side port
Rotator Phaco-Axe
• Highly polished mushroom rotator • 0.75 x 0.75mm Axe
• 45° angled shaft, tip to angle length 10mm • Axe direction suitable for a left handed surgeon
• Barrett balance handle, length 122mm • 45° angled shaft, tip to angle length 10mm
99 2014 Catalogue
www.duckworth-and-Kent.com
6-085-5 Barrett Double Ended Phaco-Axe, designed for left side port
Phaco-Axe Phaco-Axe
0.75 x 0.75mm axe 0.75 x 1.10mm axe
Axe direction suitable for a right handed surgeon 45° angled shaft, tip to angle length 10mm
45° angled shaft, tip to angle length 10mm Barrett balance handle, length 124mm
6-092-2 Osher Hard Nucleus Chopper, designed for left side port
• Straight, fork shape tip, tip length 0.55mm and 0.75mm with sharp cutting edge
• Curved shaft, tip to curve length 6.5mm
• Round handle, length 124mm
6-092-3 Osher Hard Nucleus Chopper, designed for right side port
Spatulas
Blunted 0.5mm tip, modified shape and design in order to minimise incision leakage during use and reduce risk of posterior
capsule damage.
6-099-2 DK Spatula
Short and firm spatula with a polished tip that facilitates lamella dissection / delineation or insertion into the pre-Descement’s
plane. The wire tip is tapered from 0.5 to 0.25mm diameter, and allows tenting up of the final corneal lamella for a safe split by a
sharp metal blade.
6-099-4 DK Spatula
The grooved spatula is used in deep lamellar keratoplasty, especially for baring (exposing) of Descemet’s membrane (i.e. ‘maximum
depth anterior lamellar keratoplasty’). Following the creation of a central detachment of Descemet’s membrane and endothelium (by
means of deep air injection), the grooved spatula is inserted between the deepest corneal stroma and Descemet’s membrane. The
overlaying stroma can then be cut with Vannas scissors or a sharp blade, using the grooved spatula as an impenetrable protective
barrier - to avoid touching the delicate Descemet’s membrane with a sharp instrument (which would cause an immediate gash in this
membrane). When one or more radial or semiradial stromal cuts have been made, the remaining stromal flaps can be safely excised
with blunt tipped scissors.
Mackool Holder and Sterilising Case Mackool Holder and Sterilising Case
6-135 6-135-1
• External dimensions:19mm diameter, 12mm height • External dimensions:19mm diameter, 12mm height
• Internal dimensions: 15mm diameter, 10mm height • Internal dimensions: 15mm diameter, 10mm height
• Made from Titanium • Made from Ultem, a semi transparent orange coloured plastic
6-136 Sterilising Case for Scleral Pins 6-138 Sterilising Case for Retinal Cannula
Plugs
• External dimensions:19mm diameter, 11mm height • External dimensions:19mm diameter, 13.25mm height
• Secures up to 8 Scleral Pins • Secures up to 8 Cannula Plugs
• Made from Ultem, a semi transparent orange coloured plastic • Made from Ultem, a semi transparent orange coloured plastic
Rounded knob hooks and positions iris while circular ring stabilises and supports iris for needle passes. Great for modified McCannel
iris suturing using long, curved, trans-chamber type needles.
Designed to be used in conjunction with the Anwar Keratoplasty 16 Blade Corneal Marker (9-735-1). Used to mark the anatomical
centre on the cornea through the hole in the crossbar of the corneal marker.
• 0.12mm diameter
mm
• Angled shaft, tip to angle length 10mm
• Round handle, length 118.5mm
• 0.18mm diameter
• Straight shaft
• Round handle, length 121mm
The Daya DSEK Manipulator Hooks are used as a pair to push and pull the donor disk through the paracentesis. The straight shaft
allows for a universal tip orientation, as there is sometimes a need to use the tip in the reverse position (tip pointing upwards).
The Daya DSEK Manipulator Hooks are used as a pair to push and pull the donor disk through the paracentesis.
The Daya Descemet’s Scraper has a sharp paddle tip that is angled up from the shaft to scrape the Descemet’s membrane under
the cornea. The long 14mm shaft allows the tip to go all the way across the cornea easily.
The descemet’s spatula is used to score a circular pattern into the descemet’s membrane without leaving the anterior chamber.
Using a ring marker (9-781 Ø8.0mm or 9-788 Ø9.0mm) a circular template can be marked on the surface of the cornea.
Descemet’s Scraper has a T shape tip that scrapes the Descemet’s membrane under the cornea. The long curved shaft allows the
tip to all areas of the cornea.
The Daya Donor Graft Insertion Hook is used to push the donor disk through the paracentesis. The hook automatically disengages
from the graft on withdrawal from the eye and can also be used to position the graft centrally.
Specially designed to assist in retrieving IOLs dislocated into the posterior segment of the eye. Ball shaped tip can be used to
manipulate haptics and/or optics, even when covered with residual lens capsule.
6-464 Ota Shaped Hook for the IOL Intrascleral Fixation Technique
Used in conjunction with Ota Y Marker (9-845) and Ota Reference Marker (9-846) for IOL Intrascleral Fixation Technique. The U
shape hook is used in conjunction with vitreous forceps to extract the haptic through the Y shape incision.
• 0.25mm tip
• Angled shaft, tip to angle length 12mm
m
• Round handle, length 121.5mm
• Non-reflective finish
Used in conjunction with Mackool iris retractor (6-130). Permits atraumatic insertion of iris sphincter into iris retractor, also used to
free from iris retractor at completion of procedure. Used with Mackool iris retractor forceps (2-830).
• 0.25mm tip
• 45° angled shaft, tip to angle length 12mm
mm
• Round handle, length 121.5mm
Used in minimising capsular stress during insertion of trailing IOL haptic, especially when capsulorhexis is not intact or zonular
laxity is present. Open hook proximal to tip gently retracts anterior capsule. Distal concave end is used as a guide while trailing
haptic is maintained when dialling in IOL. In this manner, there is no direct contact of haptic against capsular edge, thus avoiding
unwanted stress to capsule and / or zonule.
Especially helpful in repositioning IOL from anterior chamber or ciliary sulcus into capsular bag by providing countertraction
against haptic during rotation.
Especially helpful in repositioning IOL from anterior chamber or ciliary sulcus into capsular bag by providing counteraction against
haptic during rotation.
Multipurpose, eliminates need for multiple hooks and second instruments. Used as a second instrument to facilitate rotation and
manipulation of nucleus as cracking. Mushroom style tip minimises chance of inadvertent damage to capsule while manipulating
nuclear quadrants. Used to rotate and dial IOL within capsular bag. In presence of a small capsulorhexis, two manipulators are used
in a two handed manoeuvre allowing retraction of capsule or pupil with one manipulator and rotation and dialling with a second
manipulator. Manipulator is well suited to retracting iris in an atraumatic fashion, and two manipulators can stretch a small pupil
prior to phacoemulsification.
• 0.75mm tip
• 45° angled shaft, tip to angle length 12mm
mm
• Round handle, length 120mm
Forked tip provides superb purchase on nucleus for rotation or elevation of nuclear sections.
6-479-2 Rotator
• Textured finish
• 45° angled shaft, tip to angle length 12mm
• Round handle, length 121mm
The design maintains the angled handle to allow rotation between the fingers to control tip depth in the anterior chamber and
the tip design allows easy insertion in a small paracentesis and safe manipulation of lens matter with a very low risk of damaging
the capsule.
Rotator
Nucleus Spear • 0.85mm tip
• 0.8mm x 3.2mm tip • 45° angled shaft, tip to angle length 10mm
• 45° angled shaft, tip to angle length 10mm • Round handle, length 141mm
• 0.13mm dialler
• Angled shaft, tip to angle length 9mm
• Round handle, length 117mm
Capsule Polishers
Curettes
• 1mm cup
• Straight shaft
• Round handle, length 124.5mm
• 1.5mm cup
• Straight shaft
• Round handle, length 124.5mm
• 2mm cup
• Straight shaft
• Round handle, length 125mm
• 2.5mm cup
• Straight shaft
• Round handle, length 125mm
• 3mm cup
• Straight shaft
• Round handle, length 125.5mm
Depressors
Used for 23 gauge and 25 gauge vitreous surgery to enable the surgeon to cut and remove vitreous body surrounding the
instrument cannulas. The pin is inserted into the cannula enabling the surgeon to manipulate the cannula to give better access
to the surgeon to treat vitreous body surrounding the cannula.
Dissectors
The Barrett Rhexis Dissector is designed to assist with the removal and exchange of an intraocular lens implant. The first step in
exchanging an IOL is to dissect the anterior capsule from the lens optic. The anterior capsule can be tightly adherent to the surface
of an implant particularly with hydrophobic acrylic IOLs. Cannulas and other blunt manipulators are ineffective in creating a
plane between the anterior capsule and the anterior surface of the optic. The Barrett Rhexis Dissector has a fine chisel shaped tip
designed to dissect the edge of the rhexis from the surface of the implant. The chamber should be filled with viscoelastic and the
tip of the dissector inserted under the adherent rhexis edge. The instrument can then be swept laterally to free the adherent rhexis
from the optic surface without damaging the edge of the rhexis. A cannula can then be inserted and viscoelastoc injected to reform
the capsular bag. At this stage the lens can usually be rotated freeing the encapsulated haptics and the intraocular lens removed
whilst preserving the capsular bag.
For use in lamellar corneal procedures. Sharp tip creates dissectors with slightly rounded sides maintain single dissection plane.
Curved blade minimises distortion of cornea during dissection.
Combined Paufique knife and lamellar corneal dissector. Plaufique knife used for starting lamellar corneal
dissection and also to extend while peeling back superficial corneal tissue. Also used for undermining the
periphery of host lamellar corneal bed which helps to prevent development of a step at the anterior host donor
junction when implanting a donor lamellar that is thicker than excised host lamellar. Paufique knife also used
to for removing lamellar host tissue down to level of Descemet’s membrane. Lamellar corneal dissector is used
to create a lamellar corneal plane via a peripheral corneal pocket or to widely extend a lamellar dissection that
has been started with Paufique knife. Designed to separate lamellae and to stay within a plane. Corneal lamellae
can be rapidly seperated with this instrument without the need for lifting and turning back lamellar flap. After
separating the layers, lamellar corneal button may be excised with scissors.
Dissector Knife
• 4mm round blunt edge • 2.mm sharp rounded tip
• 55° angled shaft, tip to angle length 6mm • 55° angled shaft, tip to angle length 6mm
• Barrett balanced set handle, length 121mm
Trabeculotome
Length, diameter and curve design provides easy threading into Schlemm’s Canal. Flat handle design assists in tip orientation and
manipulation.
Muscle
Retracting the conjunctiva medially in small children can be problematic, particularly if the nose gets in the way. This means the han-
dle of the hook has to be held in a more vertical position. This can interrupt access for suture placement.
The retractors are designed to push the conjunctiva out of the way rather than pull it. By doing so the sclera can be accessed with-
out the handle getting in the way.
A gap has been left in the centre of the retractor. This can be helpful in placing sutures so that the heel of the needle does not knock
against the retractor.
By selecting either retractor, the position of the handle can be moved to inferior or superior. The handle is round enabling the as-
sistant to rotate the device slightly which can aid exposure of the operative site.
Double blade squint hook with integrated caliper. Instrument design allows single-handed support of the extra ocular muscle,
enabling easy insertion of sutures as the appropriately measured distance from muscle insertion.
The Assaf Resection Muscle Hook incorporates a double-armed squint hook with an integrated caliper, thereby allowing controlled
and accurate muscle resection. This design allows the surgeon to isolate and hook the extra-ocular muscle with one arm of the
instrument. The integrated caliper can be set to define the amount of muscle which needs to be resected. The caliper range is from
2mm to 15mm. The muscle is supported with the other arm of the instrument, without causing undue stretching or tension. A
suture can be passed along the groove in the second arm in either an interrupted or conventional fashion.
The Assaf Resection Muscle Hook incorporates a double-armed squint hook with an integrated caliper, thereby allowing controlled
and accurate muscle resection. This design allows the surgeon to isolate and hook the extra-ocular muscle with one arm of the
instrument. The integrated caliper can be set to define the amount of muscle which needs to be resected. The caliper range is from
2mm to 15mm. The muscle is supported with the other arm of the instrument, without causing undue stretching or tension. A
suture can be passed along the groove in the second arm in either an interrupted or conventional fashion.
Retractors
6-627 Hanasaki Lid Retractor, 7mm 6-627-1 Hanasaki Lid Retractor, 5mm
Designed by Dr Hanasaki of Japan, this is used for retracting the skin Designed by Dr Hanasaki of Japan, this is used for retracting the skin
and orbicularis muscle during ptosis surgery. See also 6-627-1 and orbicularis muscle during ptosis surgery. See also 6-627
6-627-2 Kurihashi Hanasaki Lid Retractor, left 6-627-3 Kurihashi Hanasaki Lid Retractor, right
• Double hooks 5mm and 7mm apart • Double hooks 5mm and 7mm apart
• Single piece construction with strong closing pressure • Single piece construction with strong closing pressure
• When at rest the retractors are 20mm apart • When at rest the retractors are 20mm apart
• Designed for the left eye • Designed for the right eye
Originally designed by Dr Hanasaki of Japan, this is used for retracting Originally designed by Dr Hanasaki of Japan, this is used for retracting
the skin and orbicularis muscle during ptosis surgery. See also 6-627 the skin and orbicularis muscle during ptosis surgery. See also 6-627
Lower lid retractor designed to function as a broad backstop in carbon dioxide laser transconjunctival blepharoplasty.
6-610
Barrett Modified Lens Loop
Smaller diameter allows use in phacoemulsification through a relatively small wound. Lens loop also used to apply pressure
superiorly in conjunction with pressure applied inferiorly by Barrett nucleus expressor (6-630) during manual ECCE.
• Bullet shape tip to ease insertion The 6-182 Otaka Dilator is used to dilate the lacrimal
• Double ended instrument punctum. Marks on the tips signify specific sizes as the
• Marks at diameters 0.5, 0.6 and 0.7mm dilator is inserted.
• Marks at diameters 0.8, 0.9 and 1mm
Video available on website
• Round handle, length 104.5mm duckworth-and-kent.com/media
• Bullet shape tip to ease insertion The 6-182-1 Otaka Dilator is used to dilate the lacrimal
• Double ended instrument punctum. Marks on the tips signify specific sizes as the
• Marks at diameters 0.5, 0.6, 0.7 and 0.8mm dilator is inserted.
• Marks at diameters 0.9, 1, 1.1, 1.2 and 1.3mm
• Round handle, length 102.5mm
• Bullet shape tip to ease insertion The 6-182-2 Otaka Dilator is used to dilate the lacrimal
• Double ended instrument punctum. Marks on the tips signify specific sizes as the
• Marks at diameters 0.5, 0.6 and 0.7mm dilator is inserted.
• Marks at diameters 0.8, 0.9, 1, 1.1 and 1.2mm
• Round handle, length 103.5mm
Blepharoplasty
• 23.5mm wide
• 20.4mm wide
• Length 55mm
• 20mm wide
• 24mm wide
• Inside highly polished
• Partial matte finish
• Length 111mm
• Non-reflective finish
For use in carbon dioxide laser upper lid and transconjunctival blepharoplasty as well as to retract eyelashes in laser resurfacing of
skin.
6-667 Rabkin Eye Shield 6-667-2 Egi Rabkin Large Eye Shield
Eye Shield with centrally mounted stem to facilitate placement and removal. Protects the eye when carrying out laser blepharoplasty surgery.
Protects the eye when carrying out laser blepharoplasty surgery.
6-667-3 Egi Rabkin Medium Eye Shield 6-667-4 Egi Rabkin Small Eye Shield
Protects the eye when carrying out laser blepharoplasty surgery. Protects the eye when carrying out laser blepharoplasty surgery.
The eye shield has a loop handle rather than a peg. This reduces
the height of the eye shield making it less intrusive during surgery.
Protects the eye when carrying out laser blepharoplasty surgery.
Refractive
6-855-1 DK Femto Flap Lifter and Retreatment Spatula - Bullet Shaped Tip
• 0.5mm spatula
• Smooth shaft slightly curved shaft with blunt tip
• 45° angled shaft, tip to angle length 10mm
• Round handle, length 125mm
• 0.4mm spatula
• Smooth shaft slightly curved shaft with tapered tip
• 45° angled shaft, tip to angle length 10mm
• Round handle, length 125mm
The sharp tip of the Stevens Femto Rim Lifter is used after the femto second laser to sweep along the rim to delineate and open
the flap.
• Thin curved blade with narrow pointed tip, 1.3mm wide, sharp edges
• 35° angled curved shaft, tip to angle length 10.5mm
• Round handle, length 122mm
The curved design of the Stevens Femto Flap Lifter glides smoothly to raise the flap, whilst the sharp edges are used to separate
the adhesions under the flap that are left after the femtosecond laser.
Used to lift previous corneal flap in cases having undergone Hyperopic LASIK. Angled, curved base glides smoothly along stromal
mound whilst top flat surface dissects plane of previous flap.
Two-in-one instrument decreases instrument ray clutter and keeps flap protector easily accessible. Spatula
has tapered tip for ease of insertion under corneal flap. Polished surface on spatula minimizes friction, drag,
and distortion of flap. Flap protector has a micro-lip on its tip to allow for additional retraction of flap when
needed.
View on
Arrow
Corneal Collagen Crosslinking with Riboflavin known as CXL, C3-R and CCL. The procedure involves installing Riboflavin which
is one of the B vitamins in the eye in a specific preparation. Both the Daya Disruptor for CXL (ref 6-960) and Epithelial Disruptor
(ref 6-960-1) are used to create tiny pores in the epithelium through which the Riboflavin can pass through and directly onto the
cornea. Once adequately dosed, the eye is exposed to Ultraviolet light radiation. The riboflavin causes new bonds to form across
adjacent collagen strands in the stromal layer of the cornea, which recovers and preserves some of the cornea’s mechanical
strength. This process results in an increase in the rigidity of the cornea. The procedure is suitable for
those who have conditions such as Keratoconus or other forms of ectasia.
Retinal
The Protective Cleaning Cover is used to protect the interchangable Vitreoretinal Heads during cleaning and reprocessing cycles,
and can be used instead of the plastic re-usable protective cover that is supplied with every VR Head. A luer flushing adaptor at
the back of the cover enables ‘back flush’ cleaning and disinfection of the VR Head.
The small flushing adaptor is used inconjunction with the plastic re-usable protective cover that is supplied with every
Vitreoretinal Head and enables ‘back flush’ cleaning and disinfection of the VR Head.
• Designed to assist the insertion of the Instrument Cannula (8-640-1) and Infusion Cannula Tip (8-643)
• Blunt tip
• Round handle, length 100mm
This device eliminates the need to suture the lens. Internal ring holds the lens and the four smaller rings are held in position
by cannulas.
Keratometers
The Osher Hyde Keratometric Ruler provides a semi-quantitive method of determining the amount and cylindrical axis of
astigmatism in a relatively easy fashion at the operating microscope.
The keratoscope consists of five apertures within a titanium bar. The first aperture is circular and is surrounded by standard
angular gauge, whereas the other four are elliptical and correspond to 2, 3, 4 or 5 dioptres of astigmatism, the cylindrical axis
being denoted by marks along the long meridian of the ellipse.
• Round
• Distinctive identification labelling
(reorder for ring, specify B-0806)
Quantitative keratoscope assists with detection of astigmatism at end of procedure. Microscope light provides a bright reflective
image. Surgeon selects which of three ring images is most circular to determine a quantitative estimation of astigmatism. Handle
contains and engraved scale to facilitate determination of astigmatism.
Clamps
Replaces need for a mosquito or artery forceps. Holds sutures to drape without piercing plastic drapes.
MANUFACTURED IN ENGLAND
Punches & Inserters
Glaucoma Punches
Inserters
2014
Duckworth & Kent
Glaucoma Punches
• Designed to punch 0.5mm x 0.3mm • Can be used with a short scleral tunnel incision
• Particularly suited when small sclerostomy required • Squeeze action handle activates shaft to punch
• Punch action can be repeated to create larger sclerostomy • Round squeeze handle, length 117mm
Key features of the design are: 1) This punch is recommended for phaco-trabeculectomy and primary trabeculectomy with reason-
able peripheral anterior chamber depth including plateau iris. 2) Scleral tunnel punch for use with iridectomy or scleral sutures. 3)
Anterior chamber should be deepened with chondroitin sulphate. 4) Chisel profile of leading edge allows easy entry into the scleral
tunnel. 5) Long narrow shaft allows passage through tunnel without wound distortion. This prevents anterior chamber shallowing
and risk of injury. 6) Angled blade profile allows secure engagement of deep anterior tunnel edge. 7) Position of tip remains steady
during activation of punch. This avoids snatching and improves stability. 8) Viscoelastic should be left in the anterior chamber. 9) One
piece construction avoids improper or loose assembly.
Inserters
• 7-810 Capsular Tension Ring Delivery System is to be used for implantation of Morcher capsular tension ring
• Injector to insert the capsular tension ring
• Bayonet fitting allows easy separation of main body and centre rod
• Overall length 145mm
Sugiura Ciliary Sulcus Pad Injector Video available on our website - www. duckworth-and-kent.com/media
7-818
• Designed for suture fixation of IOLL implants to sclera through a 2.65mm inci
incision
nc sion
• Injector is to be used to position and expel the MANI 1486L needle
• 20 gauge curved shaft
• Bayonet fitting allows easy separation of main body and centre rod
• Overall length 130mm
In 1999 Dr Sugiura introduced a new technique to help make suturing haptics of intraocular lens into the Ciliary Sulcus safer and more
exact using the ‘Ciliary Sulcus Pad’. The original design used a silicone sponge pad that matched the shape of the Ciliary Sulcus. With
the pad positioned at the Ciliary Sulcus, a needle pushed through the pad would repeatedly and accurately pierce the Ciliary Sulcus in
the correct position.
Dr Sugiura worked with Duckworth & Kent to develop an injector for inserting the needle, using titanium as the material for the Cili-
ary Sulcus Pad. The Sugiura Ciliary Sulcus Pad Injector (7-818) simplifies the procedure and uses a material that is safe and widely used
in ophthalmology.
Since the width of the Ciliary Sulcus pad is 2mm it can be inserted through a 2.6mm corneal incision. It is introduced into the eye
from the opposite side of the point where the needle is inserted. Smoothly moved under the iris, and placed at the Ciliary Sulcus.
Pushing the injector plunger the needle passes through the injector pad and the Ciliary Sulcus. The needle is pushed out and injector
MANUFACTURED IN ENGLAND
Irrigating &
Aspiration
Phaco Wrenches
Scleral Pins
Cannulas
Infusion / Chamber Maintainers
Retinal
Retinal Infusion
Irrigating Choppers
Irrigation & Aspiration
2014
Duckworth & Kent
Phaco Wrenches
8-001 8-006
DK Phaco Wrench DK Phaco Wrench
• For use with Alcon series 20000 LEGACY • For use with Alcon series 10000 MASTER
Scleral Pins
8-050 8-051
DK Scleral Pin, 20 gauge DK Scleral Pin, 19 gauge
• 20 gauge (0.9mm diameter) • 19 gauge (1mm diameter)
• Coloured blue • Coloured gold
• Length 3.5mm • Length 3.5mm
8-052 6-136
DK Scleral Pin, 18 gauge Sterilising Case for Scleral Pins
• 18 gauge (1.2mm diameter) • Secures up to 8 Scleral Pins
• Coloured purple • External dimensions:19mm diameter
• Length 3.5mm 11mm height
Actual Scale
Cannulas
8-601 8-601-1
Inamura Hyper-Hydrodissection Cannula, 23 gauge Inamura Hydrodissection Cannula, 60° twin jet angle,
22 gauge
• 23 gauge tube (Ø0.65mm diameter • 22 gauge tube (Ø0.7mm diameter)
• 0.9mm x 0.3mm flattened tip • Twin jets, inclusive angle 60°
• Twin jets • 45° angled tip
• 45° angled tip
8-601-2
• 22 gauge tube (Ø0.7mm diameter) The Inamura Multipurpose Cannula is used for; Hydrodissection and Nucleus
• Twin jets, inclusive angle 30° Rotation, Iris Reposition – Floppy Iris Syndrome, Aspiration of Air Bubbles,
• 45° angled tip Aspiration of Liquefied Cortex and Cleaning the Operative Field.
8-602 8-604
8-605
8-720
DK Cannula Handle
8-607 8-607-2
Yasuma Anterior Chamber Infusion Cannula Yasuma Anterior Chamber Infusion Cannula
• Triangle tip shape • Triangle tip shape,
• W = 6, L = 4.5 and thickness 1.2mm • W = 5, L = 4.5 and thickness 1.2mm
• Front irrigating port, 0.8mm diameter • Front irrigating port, 0.8mm diameter
• 19 gauge tube, 45° curved shaft • 19 gauge tube, 45° curved shaft
• Luer fitting • Luer fitting
5mm
Designed by Dr Yasuma of Japan, the anterior chamber infusion cannula assists in the removal of soft lens material. The cannula tip is designed to seal a
2.5mm to 3mm incision whilst still providing infusion to the anterior chamber, enabling complete irrigating and aspiration of residual lens material with
a stable anterior chamber. The cannula tip and shaft are made from one piece titanium with a high quality bore, giving consistent flow rates.
8-609 8-609-1
8-609-2
Self-retaining twist style mechanism secures cannula. 20 gauge thin wall fits standard sclerostomy incision. Stabilising plate
prevents twisting and damaging of intraocular structures. Bevelled opening is marked by notch on plate for accurate positioning
of bevel away from lens.
Self-retaining twist style mechanism secures into sclerostomy incision. Stabilizing plate prevents twisting and damaging of
intraocular structures. Bevelled opening is marked by notch on plate for accurate positioning of bevel away from lens.
Round shaft seals paracentesis opening, even when cannula is rotated within paracentesis.
Round shaft seals paracentesis opening, even when cannula is rotated within paracentesis.
Textured tip allows for capsule polishing after removal of cortex. Round shaft seals
paracentesis opening, even when cannula is rotated within paracentesis.
8-640-2 8-640-6
8-640-7 8-640-9
Nishimura Fibre Optic Cannula, 23 gauge 23 Gauge Instrument Cannula 20 Gauge Incision
• Cannula for 23 gauge chandelier / fibre optic probes • Cannula for 23 gauge instruments
• Larger footplate stabilises position of fibre optic • Seals 20 gauge incision. The instrument is used after
• 45° bevelled tip, overall length 6.5mm inscerting silicone oil through a 20g port
• Cannula Plug, 8-642-1, seals Cannula when not in use • Overall length 5.6mm
• Instrument Cannula is inserted into the sclera with the • Cannula Plug, 8-642-1, seals Cannula when not in use
aid of the Cannula Inserter, ref: 6-190-1 • Instrument Cannula is inserted into the sclera with the
•Has a unique screw thread fitting for the Nishimura aid of the Cannula Inserter, ref: 6-190-1
Cannula (ref : 8-641-7)
8-642-1
Cannula Plug
Cannula Plug, 23 gauge
• Seals 23 gauge Instrument Cannula when not in use
• Overall length 7.7mm
Instrument Cannula
8-640 8-640-8
8-640-10 8-642
• 25 gauge tip
• Infusion cannula is inserted into the eye through an instrument
Cannula
• Silicone tubing and luer fitting supplied
• 23 gauge tip
• Infusion cannula is inserted into the eye through an instrument
Cannula
• Silicone tubing and luer fitting supplied
8-641-3 8-641-4
8-641-6 8-641-7
8-641-8 8-641-9
• 23 gauge tip
• 45° bevelled tip
• Silicone tubing and luer fitting supplied
• Overall length 9.5mm
• 23 gauge tip
• 45° bevelled tip
• Overall length 9.5mm
• Supplied as cannula tip only
Irrigation Choppers
For sub-incisional cortex removal. Attach 5cc syringe filled with BSS to luer lock fitting, place cannula through a 1mm side port
paracentesis opening, fill anterior chamber with BSS, then loosen or remove sub-incisional cortex by manually aspirating with
syringe. Nicely complements conventional I/A techniques. Needs one paracentesis opening.
hole
position
• 16 gauge, 1.63mm tube diameter,
iaameter,
• 0.8mm irrigation ports, 0.25mm aspiration port
• 90° angled tip
• Straight shaft, tip to handle length 15.5mm
• Round handle, length 130mm
8-731-4, Curved with half texture 8-732-4, Curved with half texture
MANUFACTURED IN ENGLAND
Fixation Rings,
Gauges, Markers
& Specula
Fixation Rings
Gauges
Markers
Specula
2014
Duckworth & Kent
• 3/4 offset ring, 13mm diameter ring dual-sided with nine point fixation
• Pivot swivel round handle, length 114mm
9-526 Shepard Fine Thornton Fixation Ring Snow Tyre Pattern, 13mm
Unique snow-tyre pattern, rather than sharp points, for fixation. Handle, mounted at 70°, is angled more acutely to avoid nose,
especially during the formation of a temporal clear corneal incision and/or paracentesis. Stabilises globe during cataract and
glaucoma wound construction, paracentesis and astigmatic keratotomy. Gives firmer, more positive control of globe with less
discomfort.
• 10.mm wide section of a 13mm diameter ring with snow-tyre pattern fixation
• Fixed round handle, length 93.5mm
9-536 Barrett Fine Thornton Fixation Ring with Degree Markings, 14mm
• Fixation Plate stabilizes the eye when inserting the Instrument Cannula or Infusion Cannula Tip
• 8.3mm diameter plate, with 15 point fixation
• Slot allows easy removal of Fixation Plate
• Round handle, length 124mm
• Low profile ¾ ring, 5mm diameter with 5 point fixation The location for placement of the Instrument Cannula from the edge of
• Caliper end 3.5mm internal dimension the limbus is marked by the 3.5mm caliper on the end of the Fixation
• Fixed flat handle, length 108mm Ring with Caliper. Then the fixation ring end is used to fixate and stabilize
the eye whilst the needle is used to make the initial incision.
Capsulorhexis Gauges
9-518-1R Round Handle Fujimoto CCC Guide - Ø5.3mm
9-518-2R Round Handle Fujimoto CCC Guide - Ø5.6mm
• Designed to assist in creating a well centred and sized 5.5mm capsulorhexis for multifocal lenses
• Use the centre hole for locating the device on the visual axis of the eye, the microscope light reflex and not the centre of the pupil
• The surgeon uses their same eye as the patients eye for locating the device centre hole on the microscope light reflex
• Castellated ring at the tip which marks five segments of a 6.5mm diameter on the cornea, for a 5.5mm diameter capsulorhexis
• The capsulorhexis should be guided just inside the five marks on the cornea
• Tip head angle 50°
• Round handle , length 125mm
Injection Guide
• PAT.P 2005.316218
The Intravitreal Injection Guide facilitates the intravitreal injection procedure by stabilising the eye and the needle, whilst allowing
for accurate positioning of the needle for safe injection of therapeutic agents into the vitreous cavity. The unique “snow-tyre”
configuration, as opposed to sharp points, allows for a firmer fixation, a more positive control of the globe, but less discomfort to pa-
tient. Using this guide, the injection needle can be directed accurately into the vitreous cavity, avoiding both the lens and peripheral
retina, thereby eliminating the need for measuring the location of the pars plana.
The 5.5mm gap in the fixation ring allows for an anterior chamber tap, should the need arise in order to avoid an intra-ocular pres-
sure spike.
3.5mm
Needle
side view on the eye with a
needle passing through the guide
Calipers
Incision Gauges
The individual gauges have 3 limbs. The tips of each limb increase in width in stepped increments of 0.1mm.
The enlarged view above shows a limb that measures 1.9, 2 and 2.1mm. Up to the first 1.0mm from the tip the limb width is 1.9mm.
Between 1mm and 2mm the limb width steps to 2mm. Then from 2mm the limb width steps to 2.1mm. Engraved numbers identify
the widths.
9-686-1 9-686-2
D&K D&K
-2
-1
CE
CE
86
86
9- 6 9- 6
2.7
2.4
1.8
1.5
2.6
2.3
1.7
1.4
2.5
2.2
1.6
1.3
The individual gauges have 3 limbs. The tips of each limb increase The individual gauges have 3 limbs. The tips of each limb increase
in width in stepped increments of 0.1mm. Engraved numbers in width in stepped increments of 0.1mm. Engraved numbers
identify the widths. identify the widths.
9-687 9-687-1
D&K
-1
CE
87
9-6
1.1
1.2
9-687-3
9-687-2
DK Incision Gauge 1.6, 1.7 & 1.8mm
DK Incision Gauge 1.3, 1.4 & 1.5mm
• Gauge measures 3 sizes of 0.1mm increments
• Gauge measures 3 sizes of 0.1mm increments • 1.6, 1.7 & 1.8mm
• 1.3, 1.4 & 1.5mm • Gauge specially coloured for easy identification.
• Gauge specially coloured for easy identification. • Colour: Light Green
• Colour: Dark Blue
1.9
2.0
1.6
2.1
D&K D&K
-2
CE
-3
CE
86
87
9- 6 96
2.7
2.4
1.7
1.8
2.6
2.3
2.5
2.2
9-687-4 9-687-5
DK Incision Gauge 1.9, 2 & 2.1mm DK Incision Gauge 2.2, 2.3 & 2.4mm
• Gauge measures 3 sizes of 0.1mm increments • Gauge measures 3 sizes of 0.1mm increments
• 1.9, 2 & 2.1mm • 2.2, 2.3 & 2.4mm
• Gauge specially coloured for easy identification. • Gauge specially coloured for easy identification.
• Colour: Blue 1.9 • Colour: Gold
2.2
D&K D&K
-4
-5
CE
CE
87
87
9-6 9-6
2 .0 2.3
2 .1 2 .4
9-687-6 9-687-7
DK Incision Gauge 2.5, 2.6 & 2.7mm DK Incision Gauge 2.8, 2.9 & 3.0mm
• Gauge measures 3 sizes of 0.1mm increments • Gauge measures 3 sizes of 0.1mm increments
• 2.5, 2.6 & 2.7mm • 2.8, 2.9 & 3.0mm
• Gauge specially coloured for easy identification. • Gauge specially coloured for easy identification.
• Colour: Purple • Colour: Copper
2.8
2.5
D&K D&K
-7
-6
CE
CE
87
87
9-6 9-6
2.9
2 .7
2.6 3.0
Mendez Gauges
10° interval marks. Designed for surgeons familiar with use of a standard phoropter.
LRI Gauges
30 0 30
60
60
90
90
60
60
30
0
30 • Measures 0° to 90° in 10° increments x 4
• Ø11mm internal ring diameter
• 12 point fixation
• Flat handle, length 116mm
30 0 30
60
60
90
90
60
60
30
0
30
• Measures 0° to 90° in 10° increments x 4
• Ø12mm internal ring
• 12 point fixation
• Flat handle, length 116mm
30 0 30
60
60
90
90
60
30
0
30 • Ø13mm internal ring diameter
• 12 point fixation
• Flat handle, length 117mm
30 0 30
60
60
90
90
60
30
0
30 • Ø14mm internal ring diameter
• 12 point fixation
• Flat handle, length 118mm
Axis Markers
• 2 blades
• 4mm inside diameter, 11.5mm outside diameter The axis marker used in conjunction with the 9-705R-1 Mendez Degree
• Lowest profile with centre pointer Gauge can create marks for the desired axis of Toric IOL alignment.
• Round handle, length 95mm
9-730 Thornton Lowest Profile Parallax Free Blade Radial Maker, 4 blades
• 4 radial blades
• 4mm inside diameter, 13mm outside diameter
• Lowest profile with centre pointer
• Round handle, length 128mm
• 5 radial blades During keratoplasty Dr Sugita uses the marker as a guide for making 20
• 4mm inside diameter, 13mm outside diameter suture lines. Marker creates 5 lines on the cornea. Three sutures are place
• Lowest profile with centre pointer between each mark then final sutures placed to produce total of 20 sutures.
• Round handle, length 127mm
9-732 Thornton Lowest Profile Parallax Free Blade Radial Maker, 8 blades
• 8 radial blades
• 4mm inside diameter, 13mm outside diameter
• Lowest profile with centre pointer
• Round handle, length 128mm
9-733 Thornton Lowest Profile Parallax Free Blade Radial Maker, 12 blades
• 12 radial blades
• 4mm inside diameter, 13mm outside diameter
• Lowest profile with centre pointer
• Round handle, length 128mm
• 16 radial blades
• 5mm inside diameter, 13mm outside diameter
• Lowest profile with centre pointer
• Round handle, length 128mm
• 16 radial marks
• 10.5mm outside diameter ring Head of the marker has peripheral cut-outs to assist in accurately placing
• Peripheral cut-outs spaced around the blades the regular spaced peripheral radial marks on the cornea. The hole and
• Central crossbar crossbar facilitates centralisation of the trephine blade.
• Round handle, length 125mm
• Lowest profile with centre pointer Improved visualisation, marks at every 10°. Two wings assist with marking
• Measured outside line, outer diameter axis of astigmatism.
• 6mm inside diameter, 8mm outside diameter
• Round handle, length 125mm
• Measured outside line, outer diameter Designed to mark at 9mm and 11mm. Advantageous when doing limbal
• 9mm inside diameter, 11mm outside diameter arcuate incision and astigmatic surgery both in combination with other
• Round handle, length 128mm intraocular procedures and separately.
Viscocanalostomy Markers
Marker assures consistent sizing, shaping and placement of superficial flap for Viscocanalostomy procedure. Cross hatches are
1.0mm away from corneal side of marker or 4.0mm away from apex. Marker is used to outline superficial flap of viscocanalostomy.
After conjunctiva is retracted, sclera is examined for collector channels and marker is placed between two channels with cross
hatch marks at limbus. Apply with pressure to globe for 15 seconds, remove and examine mark to ensure placement is positioned
properly. If placement is not optimal, sclera refills with blood after another 30 seconds or so and marker can be reapplied to correct
position. Upon removing marker, outline is followed with mini diamond blade and sclera is cut down 200 - 250 microns. Marker
assures consistent sizing, shaping and placement of superficial flap for viscocanalostomy procedure.
Ring Markers
9-715W 6mm and 6.5mm Double Ended Ring Marker with Cross Wires
• 6mm and 6.5mm diameter rings • Double ended, markers on both ends for efficiency and economy
• Low profile with cross hairs • Round handle, length 124mm
• Outside of ring mark is measured • Accuracy certificate supplied in package
9-716W 7mm and 8mm Double Ended Ring Marker with Cross Wires
• 7mm and 8mm diameter rings • Double ended, markers on both ends for efficiency and economy
• Low profile with cross hairs • Round handle, length 126mm
• Outside of ring mark is measured • Accuracy certificate supplied in package
9-716W-1 8.5mm and 9.0mm Double Ended Ring Marker with Cross Wires
• 8.5mm and 9mm diameter rings • Double ended, markers on both ends for efficiency and economy
• Low profile with cross hairs • Round handle, length 128mm
• Outside of ring mark is measured • Accuracy certificate supplied in package
Toric Markers See page 188 at the back of this section for a comparison chart of toric markers
The Cionni Toric Reference Marker for small eyes marks from the 8.5mm diameter going out to 12.75mm diameter. The marker is used
to mark the horizontal and vertical reference meridians pre-opp with the patient in an upright position as the eye typically rotates
when the patient is supine. These meridians will be used to identify the desired meridians for the incision and IOL alignment.
The Four Blade Toric Reference Marker marks from the 8.5mm diameter going out to 12.75mm diameter. The marker is used to mark
the horizontal and vertical reference meridians pre-opp with the patient in an upright position as the eye typically rotates when the
patient is supine. These meridians will be used to identify the desired meridians for the incision and IOL alignment.
• 2 rotating blades, radial marks Benefits of Cionni Toric Axis Marker for small eyes, 9-841-1
• 9.35mm inside diameter, 12.75mm outside diameter - Single Handed Instrument
• Measures 0° to 180° in 5° increments - Gauge diameter 16.0mm, suitable for small eyes
• External gauge diameter 16mm - 2 blades rotate within the degree gauge
• 40° angled shaft - Easy to use, measurements every 5 degrees
• Flat handle, length 116.5mm - Marks at the limbus
- Recommended Reference Marker 9-840-1
Designed for surgeons familiar with placing a 2 blade axis markers inside a Mendez gauge. The 2 blades on the Barrett Toric Maker are
fixed and the degree gauge scale rotates, so the surgeon relates the blade orientation to the handle.
First, the degree gauge is rotated, lining up the desired meridian for the IOL axis to the lines on the edge of the marker. The two
blades on the underside of the Axis Marker are then coated with a marking pen and the limbus dried with a sponge. The Axis Marker
is then positioned over the eye, rotating the handle to line up the lines at 0 degrees on the degree gauge with the horizontal
meridians previously made by the reference marker. The Axis Marker is then lowered to touch the eye so that the blades make the
desired marks on the limbus.
The R J Mackool™ Toric Axis Marker features an easier to operate pre-settable dial. This permits the technician, operating room nurse
or surgeon to precisely set the instrument dial within seconds, as opposed to the cumbersome alternative of turning the instrument
over to view the marking blades on the bottom of the instrument, while simultaneously attempting to grasp and align them with
the gauge on the top of the instrument. A unique blade design retains dye, permitting the cornea to be marked with the lightest of
touch, and all blades extend 1 mm from the diminutive dial where they are easily observed during the corneal marking. The rounded
edges of the marking blades prevent abrasion to the cornea during the marking manoeuvre, and their extension well beyond the
diminutive central portion of the marker permits the surgeon to see the blades as they are placed at the preselected meridian.
The concept of using the traditional surgical caliper but changing the measurement scale of the ring from mm to degrees, has led
to the creation of the Dr. Limoli’s Goniometric Caliper. This enables an accurate measurement of the correct axis for the Toric IOL
implant.
See page 188 at the back of this section for a comparison chart of toric markers
• Anatomically stable • Optically stable • Enables surgery with a small incision • Does not require a sutured fixation IOL • No need to perfrom scleral flap
• Easy extraction of the IOL haptic • Improved incision closure • Either a 3 piece IOL or a single-piece IOL can be used • No need to use fibrin glue.
9-846 Ota Reference Marker for the IOL Intrascleral Fixation Technique
9-854R
• Lowest profile with three radial elements and two non-radial
dial elements
• Flat handle, length 111mm (9-854)
• Round handle, length 98mm (9-854R)
All D&K specula are made from a single piece of titanium. There are no joints or welds which create weak
points in the construction.
Ope
s
Soli
Clo
Computerised machines accurately
produce the shape of the specula
blades
Rest
Temporal
Blade Size
Rest Nasally
9-550 9-551
9-552 9-552F
9-559 9-560
9-561 9-561-1
9-562 9-570
9-570-1 9-570-2
9-572 9-573
9-573-1 9-574
9-574-1
9-554 9-555
9-555F 9-556
9-556F 9-557
9-557F 9-557F-1
9-560-1 9-567
9-575 9-580F
9-581F 9-582F
9-584
9-564 9-565
9-566 9-571
9-571-1 9-571-2
9-558 9-558-1
Main body is made from a single piece of titanium with added strength
in the arms to give rigid strong construction. This gives less flex if the
patient attempts to close down on the blades.
9-577 9-577-3
DK Closed Blade Adjustable Paediatric Speculum, temporal DK Closed Blade Adjustable Paediatric, temporal
• Paediatric 9.5mm closed blades • Paediatric 7mm closed blades
• Curved to rest temporal • Curved to rest temporal
• Rigid design • Rigid design
• Adjustable with thumb screw • Adjustable with thumb screw
9-578 9-578-2
DK Closed Blade Adjustable Speculum, temporal DK Thin Closed Bade Adjustable Speculum, temporal
• 14.5mm closed Blades, 1mm thick • 13.5mm closed Blades, 0.5mm thick
• Curved to rest temporal • Curved to rest temporal
• Rigid design • Rigid design
• Adjustable with thumb screw • Adjustable with thumb screw
9-578-3 9-578-6
DK Thin Closed Bade Adjustable Speculum, nasal Ohtori Closed Blade Adjustable Speculum with Notch
• 13.5mm closed Blades, 0.5mm thick • 13.5mm closed blades with notch
• Curved to rest nasal • Thin blade thickness
• Rigid design • Curved to rest temporal
• Adjustable with thumb screw • Ridged design
• Adjustable with thumb screw
Notch allows you stabilise the globe. This is carried out by suturing to
the globe, the suture is then tied to the speculum blade. The notch
secures the suture and the globe is stabilised.
9-578-7 9-578-8
VSL Ring Holding Adjustable Speculum, temporal VSL Ring Holding Adjustable Speculum, temporal
• 17mm closed blades • 15mm closed blades
• Curved to rest temporal • Curved to rest temporal
• Adjustable with thumb screw • Adjustable with thumb screw
• Grooves in the speculum blades are designed to hold two silicone • Grooves in the speculum blades are designed to hold two silicone
bands that in turn support the VSL ring bands that in turn support the VSL ring
(bands and VSL ring not supplied) (bands and VSL ring not supplied)
9-578-9 9-578-10
DK Closed Blade Adjustable Speculum, temporal DK LASIK Closed Blade Adjustable Speculum, temporal
• 20mm closed blades • 17mm closed blades
• Curved to rest temporal • Curved to rest temporal
p
• Rigid design • Adjustable
djustable with thumb screw
• Adjustable with thumb screw
DK Open Blade Adjustable Paediatric Speculum, temporal Mackool Open Blade Adjustable Speculum, temporal
• Paediatric 9.5mm open blades • 13.5mm open blades, 1.0mm thick
• Curved to rest temporal • Curved to rest temporal
• Rigid design • Rigid design
• Adjustable with thumb screw • Adjustable with thumb screw
9-579-1 9-579-2
DK Open Blade Adjustable Speculum, nasal DK Thin Open Blade Adjustable Speculum, temporal
• 13.5mm open blades, 1.0mm thick • 13.5mm open blades, 0.5mm thick
• Curved to rest nasal • Curved to rest temporal
• Rigid design • Rigid design
• Adjustable with thumb screw • Adjustable with thumb screw
9-579-3 9-579-4
DK Thin Open Blade Adjustable Speculum, nasall Jakobsen Open Blade Adjustable Speculum, temporal
• 13.5mm
mm open blades, 0.5mm thick • Deeper 13.5mm open blades, length X increase to accommodate
• Curved
ved to rest nasal thickened lid margins or excess lid skin
• Rigid
d design • Curved to rest temporal
• Adjustable
ustable with thumb screw • Rigid design
• Adjustable with thumb screw X
This speculum is the same as the 9-579 but with larger blades to
accommodate patients with thickend lid margins or excess lid skin.The
larger blades go further under the lids, reducing the risk of the blades
popping out.
9-579-5 9-579-6
DK Open Blade Adjustable Speculum, temporal DK Open Blade Adjustable Speculum, temporal
• 12mm open blades • 14mm open blades
• Curved to rest temporal • Fine thin blades provide comfort for the patient
• Offset blade • Curved to rest temporal
• Rigid design • Rigid design
• Adjustable with thumb screw • Adjustable with thumb screw
9-579-7 9-579-8
DK Open Blade Adjustable Speculum,nasal DK Open Blade Adjustable Paediatric Speculum, temporal
• 13.5mm open blades, 1mm thick • 10.5mm open blades
• Curved to rest nasal, greater angle (55°) than standard (30°) • Curved to rest temporal
• Rigid design • Adjustable with thumb screw
• Adjustable
able with thumb screw
9-583 9-583-1
Designed to achieve maximum comfortable exposure of eye for suction ring placement to allow microkeratome to be easily positioned
on the pivot post without obstruction during LASIK surgery. Lengthened speculum blades accommodate microkeratome. Simplicity and
elegance of design allows speculum to be used in other types of ocular surgery.
9-585
• Ideal for surgeon performing anterior segment procedures from a temporal approach
• Nasal placement frees temporal aspect to provide total access to temporal limbus
• Self-locking mechanism ideal for topical anaesthesia since it prevents speculum from closing during
procedure when patient blinks or squeezes, blades 14mm wide
• Open piece design, without telescoping or sliding arms, prevents speculum from “sticking or hanging
up” after repeated use
Placed into palpebral fissure with locking mechanism situated nasally. Thumb plates are pressed
together to open and capture lids. Crossing arms lock at four positions to accommodate various
size palpebral fissures. Pressing thumb plates further releases locking mechanism, allowing
surgeon easy removal of speculum. Releasable without opening to fullest extension, providing
comfortable removal even in patients with small palpebral fissures.
9-585-1
Thumb plates are pressed together to open and capture lids. Crossing arms lock at four positions
sitions
to accommodate various size palpebral fissures. Pressing thumb plates further releases locking
king
mechanism, allowing surgeon easy removal of speculum. Releasable without opening to fullest
ullest
extension, providing comfortable removal even in patients with small palpebral fissures.
9-588 9-588-1
Lightweight, compact and strong. Maximum exposure allows Maximum blade exposure allows application of suction ring when
application of suction ring and microkeratome run. using the LenSx® Laser. LenSx® is registered to Alcon LenSx Inc.
9-588-2 9-589
9-590 9-590-2
Profile is similar to a wire type Speculum; locking mechanism allows To accommodate different optimum positions for the aspirating port
Speculum to resist eyelid squeezing etc., especially during procedures the length can be adjusted by rotating the knurled screw.
with topical anaesthesia. Construction of Speculum allows maximum
exposure, resists eyelid compression and avoids any compression of Video available on website
globe. duckworth-and-kent.com/media
9-591 9-592
9-597-1 9-598-1
9-598-2
9-576 9-576-1
Khaw Standard Glaucoma Speculum, temporal Khaw Small Glaucoma Speculum, temporal
• Central indent and side notch to achieve maximal • Central indent and side notch to achieve maximal exposure for
exposure for glaucoma surgery glaucoma surgery
• Minimal pressure on eye • Minimal pressure on eye
• 14mm solid blades • Small size for use with small palpebral apertures and children
• Angled to rest temporal • 7.5mm solid blades
• Adjustable with thumb screw • Angled to rest temporal
• Adjustable with thumb screw
9-576-2 9-576-3
Khaw Standard Glaucoma Speculum, temporal DK Thin Blade Khaw Standard Glaucoma Speculum,
• Central indent and side notch to achieve maximal exposure for
temporal
glaucoma surgery
• Central indent and side notch to achieve maximal exposure for
• Minimal pressure on eye
glaucoma surgery
• 14.5mm solid blades
• Minimal pressure on eye
• Blade width reduced with straight outside edge
• 14.5mm solid blades
• Angled to rest temporal
• Angled to rest temporal
• Adjustable
justable with thumb screw
• Adjustable with thumb screw
9-576-4 9-576-5
DK Thin Blade Khaw Standard Glaucoma Speculum, temporal DK Thin Blade Khaw Narrow Glaucoma Speculum, temporal
• Central indent and side notch to achieve maximal exposure for • Central indent and side notch to achieve maximal exposure for
glaucoma surgery glaucoma surgery
• Minimal pressure on eye • Minimal pressure on eye
• Thin blade thickness, 0.5mm • Thin blade thickness, 0.5mm
• 14.5mm solid blades • 14.5mm solid blades
• Angled to rest temporal • Narrow design for smaller opening eyes
• Adjustable with thumb screw • Angled to rest temporal
• Adjustable with thumb screw
9-577-1 9-577-4
DK Soild Blade Adjustable Paediatric Speculum, temporal DK Solid Blade Adjustable Paediatric Speculum, temporal
• Paediatric 9.5mm solid blades • Paediatric 9.6mm solid blades
• Curved to rest temporal • Curved to rest temporal
• Rigid design • Rigid design
• Adjustable with thumb screw • Adjustable with thumb screw
9-595 9-597
9-594 9-599
Speculum arms can be pressed, closed together during insertion, Lightweight, adjustable speculum may be used for both temporal
beneficial for/with tight eyelids. Truly reversible; can be inserted and nasal approach ocular surgery. Lightweight design avoids
temporal or nasal. Small, shallow blades provide combined excessive pressure on globe.
advantage;- allows easy insertion and minimal instrument snagging.
9-599-1
9-841 9-840
Marks created by Marker
9-729-1
9-705R-1 9-840-1
To see more information on our full range of toric markers view pages 169-170
MANUFACTURED IN ENGLAND
IOL Loading &
Delivery Systems
IOL Folding
IOL Insertion
IOL Loading
Injectors
Vitrectomy Cannula Systems
2014
Duckworth & Kent
• 45° angled shafts, tip to angle length 7mm Highly polished inner jaw surface protects from scratching.
• Highly polished inner jaw surface Designed specifically for AcrySof approved by Alcon.
• Flat handle, length 108.5mm
• For loading AcrySoft IOL into the MONARCH II and III cartridges The DK7717 Lens Loading Forceps are used to the load the
• Highly polished tips protects from scratching the lens surface IOL into the cartridge. To ensure a successful IOL delivery and
• Round handle, length 122mm implantation, proper loading of the IOL into the cartridge is
essential.
• 45° angled shafts, tip to angle length 11.5mm Orientation mark for proper load location. Conducive for
• Stops in handle design prevent “over folding” upward folding. Handle style assures secure grasp. Designed
• Flat handle, length 109mm specifically for AcrySof approved by Alcon.
• For loading the TECNIS® 1-Piece IOL into the One Series™ Ultra Cartridge
• Polished tips protects from scratching the lens surface
• A stop ensures the IOL is not advanced beyond the recommended position in the cartridge
• Round handle, length 96mm
The DK7726 Lens Loading Forceps are used to load the AMO TECNIS® 1-Piece IOL into the AMO One Series Ultra Cartridge. To ensure
a successful IOL delivery and implantation, correct loading and setting of the IOL into the cartridge is essential.
• For loading the TECNIS® 1-Piece IOL into the One Series™ Ultra Cartridge
• Polished tips protects from scratching the lens surface
• A stop ensures the IOL is not advanced beyond the recommended position in the cartridge
• Flat handle, length 96mm
Injectors
The thread engages at the IOL pre-load position, reducing the screw movement for the surgeon during final delivery.
To ensure a successful IOL delivery and implantation, correct loading and setting of the IOL into the cartridge is essential. Duckworth
& Kent always recommends using the Loading Forceps (DK7726) which feature highly polished surfaces for easier loading without
damage to the IOL. The forceps correctly load the IOL into the cartridge in a pre-load position.
The injector’s tip will stop at the IOL pre-load position, reducing the plunger movement for the surgeon during final delivery. The
delivery process can be carried out with a single hand.
To ensure a successful IOL delivery and implantation, correct loading and setting of the IOL into the cartridge is essential. Duck-
worth & Kent always recommends using the Loading Forceps (DK7717) which feature highly polished surfaces for easier loading
without damage to the IOL. The forceps correctly load the IOL into the cartridge in a pre-load position.
The thread engages at the IOL pre-load position, reducing the screw movement for the surgeon during final delivery.
To ensure a successful IOL delivery and implantation, correct loading and setting of the IOL into the cartridge is essential. Duck-
worth & Kent always recommends using the Loading Forceps (DK7717) which feature highly polished surfaces for easier loading
without damage to the IOL. The forceps correctly load the IOL into the cartridge in a pre-load position.
25 Gauge Cannula System, consists of: Duckworth & Kent has developed the Naito 25 Gauge Cannula System which
• 3 x Instrument Cannulas, ref: 8-640 allows a range of small incision vitrectomy instruments to pass through the
• 3 x Cannula Plugs, ref: 8-642 cannula and into posterior chamber. The system permits a complete sutureless
• 1 x Infusion Cannula, ref: 8-641 surgical procedure through a small incision that minimises the potential for
• 1 x Cannula Inserter, ref: 6-190 surgical trauma.
• 1 x Cannula Loading Forceps. ref: 2-2-832
• 1 x Fine Fixation Ring with Caliper, ref: 9-513-3
• 1 x Sterilising Tray, ref: T7003-2
23 Gauge Cannula System, consists of: Duckworth & Kent has developed the 23 Gauge Cannula System which allows a
• 3 x Instrument Cannulas, ref: 8-640-2 range of small incision vitrectomy instruments to pass through the cannula and
• 2 x Cannula Plugs, ref: 8-642-1 into posterior chamber. The system permits a complete sutureless surgical
• 1 x Infusion Cannula, ref: 8-641-2 procedure through a small incision that minimises the potential for surgical
• 1 x Cannula Inserter, ref: 6-190-1 trauma.
• 1 x Cannula Loading Forceps. ref: 2-2-832
• 1 x Fine Fixation Ring with Caliper, ref: 9-513-3
• 1 x Sterilising Tray, ref: T7003-2
MANUFACTURED IN ENGLAND
Sterilising Trays
Sterilising Trays
2014
Duckworth & Kent
Sterilising Trays
Sterilising Cases
MANUFACTURED IN ENGLAND
Index
2014
Duckworth & Kent
1 2-100D
2-100N
39
39
2-132-2N
2-132-3N
28,55
27, 52
2-2-410
2-2-410-1
67
67
1-110 10 2-100NR 39 2-132D 27, 52 2-2-410S 67
1-111 10 2-100NR8 39 2-132N 27, 51 2-2-415 54
1-111B 10 2-101 40 2-132NR 27, 52 2-2-415S 54
1-112 10 2-101D 40 2-132NR8 27, 52 2-2-422 65
1-116 5 2-101N 40 2-135 27, 52 2-2-422S 65
1-118 5 2-103 40 2-135N 27, 53 2-2-428 57
1-120 10 2-104 40 2-135NR 27, 53 2-2-428S 57
1-121 10 2-104N 41 2-135NR8 28, 53 2-2-432 42
1-122 10 2-104NR 41 2-135-1NR8 53 2-2-435 60
1-210 6 2-106 43 2-135D 53 2-2-435S 60
1-211 6 2-108 57, 58 2-137N 29, 64 2-2-445 28
1-211B 7 2-108N 57, 58 2-138D 28, 52 2-2-445S 28
1-218 5 2-110 49 2-142 53 2-248 33
1-219 6 2-110-1 48 2-144 53 2-2-500 68
1-221 9 2-110-1N 48 2-160 39, 58 2-2-500S 68
1-223 6 2-110-1NR8 48 2-167 29 2-2-501 66
1-227 5 2-110-2 55 2-170 32 2-2-501S 66
1-312 10 2-110-2N 55 2-171 32, 41 2-2-502S 31
1-400 6 2-110-2NR8 55 2-182 30 2-2-510-2 60
1-401 6 2-110D 49 2-185 32 2-2-522 61
1-410 6 2-110N 49 2-193 65 2-2-522S 61
1-411 6 2-110NR 49 2-195 24 2-2-523-1 62
1-500 9 2-110NR8 49 2-195-1 24 2-2-523-1S 62
1-500B 9 2-111 50 2-195NR8 24 2-2-523-3 62
1-501 9 2-111N 50 2-196 24 2-2-523-3S 62
1-501B 9 2-113NR8 50 2-200 41 2-2-524 63
1-510 5, 9 2-114 50 2-2-100 39 2-2-524S 63
1-512 9 2-114NR8 51 2-2-100S 40 2-2-706G 16
1-625 5 2-114-1 51 2-2-110 50 2-2-706G-1 16
1-700 7 2-114-3N 55 2-2-110-1S 48 2-2-706G-1R 16
1-705 7 2-114-4N 49 2-2-110S 50 2-2-706GR 16
1-805 7 2-114-4NR8 49 2-2-117 58 2-2-712 13
1-841 7 2-114-5NR8 51 2-2-118 57 2-2-712S 13
1-841-1 8 2-114N 50 2-2-118S 57 2-2-716G-6 17
1-841-1N 8 2-114NR 51 2-2-132 52 2-2-716G-6S 17
1-841B 7 2-115N 51 2-2-132S 52 2-2-716G-6R 17
1-841BN 8 2-116 56 2-214 28, 54 2-2-716G-6RS 17
1-841N 8 2-116N 56 2-214-2 28, 55 2-2-716G-7 18
1-842 8 2-116NR 56 2-2-144 54 2-2-716G-7R 18
1-842N 8 2-117 58 2-2-144S 54 2-2-716G-7RS 18
2-118 56 2-215 28, 54 2-2-716G-7S 18
2 2-118D
2-118N
56
56
2-2195
2-2195-1
24
24
2-2-716G-8
2-2-716G-8R
19
19
2-100 39 2-119 59 2-2195-2 25 2-2-716G-8RS 19
2-100-1 42 2-130 29, 41 2-2196 25 2-2-716G-8S 19
2-100-1N 42 2-130D 29, 41 2-2197 25 2-2-716G-9 19
2-100-2 40 2-130N 29, 41 2-2-400 42 2-2-716G-9R 20
4 5-825
5-830
86
86
6-092-2
6-092-3
101
101
6-417
6-418
108
108
4-100 82 5-831 87 6-093 101 6-418-2 108
4-115 82 5-835 87 6-095 101 6-418-3 108
4-122 82 6-096 102 6-450 108
4-125
4-130
82
83
6 6-097
6-099
102
102
6-450-1
6-460
108
109
4-390 83 6-073V 93 6-099-1 102 6-462-1 109
4-400 83 6-074 93 6-099-2 102 6-464 109
4-402 83 6-074-1 93 6-099-3 102 6-465 109
4-403 84 6-075 93 6-099-4 103 6-466 109
4-404 84 6-075-1 94 6-100 103 6-467 109
4-405 83 6-075-2 94 6-101 103 6-468 110
4-406 84 6-076 94 6-102 103 6-469 110
4-407 84 6-077 94 6-103-1 103 6-469-1 110
4-409 84 6-079 94 6-105-1 103 6-470 110
4-410 85 6-079-1 94 6-109 105 6-470-1 110
4-415 85 6-080 95 6-112 105 6-471 110
4-430 85 6-080-1 95 6-122 105 6-471-1 111
4-438 85 6-080-2 95 6-130 104 6-472 111
4-440 85 6-081 95 6-135 104, 202 6-472-1 111
4-445 85 6-081-1 95 6-135-1 104, 202 6-472-2 111
4-460 86 6-081-2 95 6-136 104, 139, 6-474 111
4-462 86 6-081-3 96 202 6-476 111
4-466 86 6-083 96 6-138 104, 202 6-479 112
4-480 84 6-083-1 96 6-140 104 6-479-1 112
4-493 83 6-083-2 96 6-180 122 6-479-2 112
4-590 82 6-083-4 96 6-180-1 122 6-481 112
4-600 82 6-085 96 6-181 122 6-482 112
4-620 90 6-085-1 97 6-182 122 6-490 112
4-620-2 90 6-085-2 99 6-182-1 122 6-490-1 113
4-620-3 90 6-085-3 97 6-182-2 122 6-491-2 113
4-620-4 90 6-085-4 99 6-190 130 6-491-3 113
4-621 90 6-085-5 100 6-190-1 130 6-493 113
4-621-3S 90 6-085-6 97 6-249 105 6-494 113
4-621S 90 6-085-7 97, 100 6-250 105 6-495 113
4-622 90 6-085-8 97 6-250-1 105 6-496 114
6-086 98 6-251 106 6-496-1 114
5 6-086-1
6-086-4
98
98
6-254
6-255
106
106
6-497
6-500
114
114
5-300-1 87 6-086-5 98 6-257 106 6-510 114
5-305-1 90 6-086-6 98 6-258 106 6-511 114
5-310-1 87 6-087 100 6-259 106 6-580 118
5-329-1 87 6-087-1 100 6-261 107 6-590 130
5-330-1 88 6-090 100 6-400 107 6-600 119
5-331-1 88 6-090-1 100 6-400-1 107 6-602 116
5-340-1 88 6-090-2 101 6-402 107 6-604 117
5-360-1 88 6-090-3 101 6-410-1 107 6-605 117
5-362 89 6-090-4 101 6-410-2 107 6-606 117
9 9-567
9-570
176
173
9-588-1
9-588-2
182
183
9-733
9-734
166
166
9-503 157 9-570-1 173 9-589 183 9-735-1 166
9-503R 158 9-570-2 173 9-590 183 9-745 166
9-508 158 9-571 177 9-590-2 183 9-746 167
9-509 158 9-571-1 177 9-591 183 9-749 167
9-509R 158 9-571-2 177 9-592 183 9-778 167
9-510 157 9-572 174 9-594 187 9-779 167
9-510R 157 9-573 174 9-595 186 9-781 168
9-511 159 9-573-1 174 9-597 186 9-781W 168
9-513-1 159 9-574 174 9-597-1 184 9-784 167
9-513-3 159 9-574-1 174 9-598-1 184 9-788 168
9-515R 157 9-575 176 9-598-2 184 9-789W-1 168
9-518-1 159 9-576 185 9-599 187 9-840 169
9-518-1R 159 9-576-1 185 9-599-1 187 9-840-1 169
9-518-2 159 9-576-2 185 9-649 161 9-840-2 169
9-518-2R 159 9-576-3 185 9-650 161 9-840-3 169
9-518-3 160 9-576-4 185 9-653 161 9-841 169
9-518-4 160 9-576-5 185 9-654 170 9-841-1 169
9-521R 157 9-577 178 9-686 162 9-841-2 170
9-526 158 9-577-1 186 9-686-1 162 9-841-3 170
9-526-1 158 9-577-2 180 9-686-2 162 9-842-1 170
9-528 157 9-577-3 178 9-687 162 9-845 171
9-536 159 9-577-4 186 9-687-1 162 9-846 171
9-537 157 9-578 178 9-687-2 162 9-853 171
9-854 171
9-854R 171
9-855 171
DK
DK7003 199
DK7003-2 201
DK7605 195
DK7610 195
DK7710 37, 191
DK7710-2 37, 191
DK7717 37, 191
DK7722 37, 191
DK7723 37, 191
DK7726 38, 191
DK7726-1 38, 192
DK7735 38, 192
DK7740 38, 192
DK7740-1 38, 192
DK7740-2 38, 192
DK7741 38, 192
DK7781 193
DK7791 193
DK7797 193
DK7797-1 193
DK7797-2 194
DK7797-3 194
T
T7000 201
T7003-1 199
T7003-2 201
T7010 199
T7010-2 199
T7010-5 201
T7020 200
T7020-2 200