Professional Documents
Culture Documents
PRACTICAL 7
AIM :- Interworking with routers: Design a three or four simple networks (with 3 to 4hosts) and connect
via Router. Perform simulation and trace how routing is done in packet transmission.
Step 1: Setup the router and hosts in CISCO Packet Tracer and assign the IP address to all thehosts
respectively.
● We will give IP address to the hosts and we will only change the subnet ID of all the IPaddress
because we want all the hosts to remain in the same network.
●
Subnet Mask of all the end devices are given as follow:Take 3 PCs, a
The IP Addresses and the Subnets for the computers are as follows,First we
28
CN|4B18-AI|PIET
COMPUTER SCIENCE AND ENGINEERING
FACULITY OF ENGINEERING AND TECHNOLOGY
COMPUTER NETWORKS(303105304)
ENROLLMENT NO: - 2203031241073
PC1 is 192.168.10.2 with subnet 255.255.255.0
29
CN|4B18-AI|PIET
COMPUTER SCIENCE AND ENGINEERING
FACULITY OF ENGINEERING AND TECHNOLOGY
COMPUTER NETWORKS(303105304)
ENROLLMENT NO: - 2203031241073
Now the subnets are same across all three computer
Perform simulation and trace how routing is done by sending a PDU(packet datagram Unit)from PC0-
PC2, PC1-PC0, PC2-PC0 vice-versa.
The transmission of all the Packets from all the sources are successfully transmitted to all thedestinations.
30
CN|4B18-AI|PIET
COMPUTER SCIENCE AND ENGINEERING
FACULITY OF ENGINEERING AND TECHNOLOGY
COMPUTER NETWORKS(303105304)
ENROLLMENT NO: - 2203031241073
PC0 has the same address 192.168.10.1 but with the subnet 255.255.255.0
31
CN|4B18-AI|PIET
COMPUTER SCIENCE AND ENGINEERING
FACULITY OF ENGINEERING AND TECHNOLOGY
COMPUTER NETWORKS(303105304)
ENROLLMENT NO: - 2203031241073
successful
Therefore, There is no difference in the functioning of router between having same subnet and differentsubnet
32
CN|4B18-AI|PIET