Professional Documents
Culture Documents
2
3
4
Sketches can be free-hand drawn or ruled drawn, i.e. drawn using ruler.
Drawings on the other hand are always ruled drawn in accordance with standard /
guideline
5
6
7
8
Differences between sketches and engineering drawings:
Sketches:
• Informal graphics, can be either ruled or free-hand
• Not to scale (although good sketches are done to proportion)
• Do not always have sheet numbers
• Typically does not have (formal) title block
• Not part of legal contract document.
Engineering Drawings:
• Formal graphical presentation in accordance with standard / guidelines
• Are always ruled and done to scale
• Always have sheet number and catalogue
• Always have title block
• Part of legal contract documents
9
10
11
12
Note the prefix of the drawing number tells us which discipline the drawing belongs to:
A: Architectural
S: Structural
C: Civil
M: Mechanical
E: Eectrical
P: Plumbing
13
See notes on revision numbering in following slides
14
15
International standard of paper size is ISO 216
Ratio of longer side (a) over shorter side (b) of A series is square root of 2, i.e. a/b = 2
Area of A0 is 1 m2
The rest of A series just follows from there, e.g. area of A1 is half of A0
16
17
Typical numbering of revisions:
18
19