Professional Documents
Culture Documents
(5-2)
where pt, ut, and Tt are the acoustic perturbations to the pressure, velocity, and temperature, respectively. The subscript “t” refers to
the fact that the acoustic variables are the total fields, that is, the sum of possible Background Acoustic Fields and the scattered fields.
In the frequency domain, the time derivatives of the dependent variables are replaced by multiplication with iω. The stress tensor is σ
and Φ is the viscous dissipation function. The right-hand-side source terms M, F, and Q are initially zero; they can be defined using
the Domain Sources feature. The variables with a zero subscript are the background mean flow values. The material parameters are
defined below. Details about the physics and references are found in the Theory Background for the Aeroacoustics Branch section.
The constitutive equations are the stress tensor and the linearized equation of state, while the Fourier heat conduction law is readily
included in the above energy equation,
(5-3)
when Adiabatic formulation is selected in the Linearized Navier–Stokes Equation Settings section the equation of state reduces to
(5-4)
MODEL INPUTS
In order to model the influence of the background mean flow on the propagation of the acoustic waves in the fluid, the background
mean flow temperature T0, absolute pressure p0, and velocity field u0 need to be defined. The density is defined in the Fluid
Properties section below, and is per default taken from the material. It is thus a function of the model inputs, that is, the background
pressure and temperature. Select User defined (the default) or Common model input. For User defined enter values for:
• Background mean flow temperature T0 (SI unit K). The default is 293.15 K.
• Background mean flow pressure p0 (SI unit: Pa). The default is 1 atm.
• Background mean flow velocity u0 (SI unit: m/s). The defaults are 0 m/s.
https://doc.comsol.com/5.6/doc/com.comsol.help.aco/aco_ug_aero.08.026.html 1/3
02/04/2024, 10:45 Linearized Navier–Stokes Model
When modeling aeroacoustics it is important how the Mapping Between Fluid Flow and Acoustics Mesh is
done from a numerical perspective. The Background Fluid Flow Coupling multiphysics coupling handles this
in an automated manner.
Physically the Coupling to Turbulent Flows (Eddy Viscosity) is also important to model the attenuation of
acoustics waves due to turbulence.
Details about the Model Input and the Default Model Inputs are found in the Global and Local Definitions
chapter of the COMSOL Multiphysics Reference Manual.
FLUID PROPERTIES
The defaults for the following are taken From material. For User defined edit the default values:
• Background mean flow density ρ (p T ) (SI unit: kg/m3). The Ideal gas option can also be selected as the density formulation.
0 0, 0
For a discussion about the air and water materials as commonly used in acoustics and other material
properties, such as the bulk viscosity, see the Acoustic Properties of Fluids chapter of this manual.
Select an option from the Coefficient of thermal expansion αp list — From material, From background mean flow density, From
Select an option from the Isothermal compressibility βT list — From background mean flow density, From isentropic
The different options for defining the (isobaric) coefficient of thermal expansion and the isothermal compressibility stem from their
respective thermodynamic definitions:
• For the From speed of sound (the default for both) options the values for the Speed of sound c0 (SI unit: m/s) and Ratio of
specific heats γ (dimensionless) are taken From material. For User defined enter a different value or expression. The From
speed of sound option is typically preferred (and the default) as the speed of sound and the ratio of specific heats are material
properties often more readily available (see definition above).
• For the From background mean flow density the values are computed from the density expression (see definition above). This
option is only valid if the density material property has the built in dependency on pressure p0 and temperature T0. This is not
always the case.
• For the From material the coefficient of thermal expansion is taken from the materials node. Not all materials have this property
defined. If this is the case a small warning cross will appear on the materials node.
• For the From isentropic compressibility option the values for the Isentropic compressibility βs (SI unit: 1/Pa) and Ratio of
specific heats γ (dimensionless) are taken From material (the default). For User defined enter a different values or expressions.
https://doc.comsol.com/5.6/doc/com.comsol.help.aco/aco_ug_aero.08.026.html 2/3
02/04/2024, 10:45 Linearized Navier–Stokes Model
• For User defined enter a value or expression for the isobaric coefficient of thermal expansion αp (SI unit: 1/K) and/or the
isothermal compressibility βT (SI unit: 1/Pa).
The GTS option can also be used to alter the governing equations to fit a desired formulation of the linearized Navier–Stokes
equations. This can be relevant in certain applications.
All the aeroacoustic specific terms can be disabled. They are grouped into Reactive terms and Convective terms. Select the following
check boxes to activate the applicable gradient term suppression (GTS):
Reactive terms
• Suppression of mean flow pressure gradients
This option sets the following term to zero:
Convective terms
• Suppression of all convective terms
This option removes all the convective terms in the governing equations. This is a drastic measure as it removes the convective
influence of the flow. It should be considered carefully before doing this. This option removes all terms of the type:
https://doc.comsol.com/5.6/doc/com.comsol.help.aco/aco_ug_aero.08.026.html 3/3