Professional Documents
Culture Documents
K LOX PROOFER
Simon Payne
Design Engineer
RESEARCH +
DEVELOPMENT
MAIN FEATURES
Above: • Instant flexo proofs
The Hand K Lox
• Easy to use - easy to clean
• Excellent repeatability
SPECIFICATION
Footprint 400 x 450mm • Reduces press down-time
ayne Design Engineer pressure between the rollers for consistent prints and this is
K303 Standard Gravure Proofer is used in laboratories for
GRAVURE
ensured by two
quality weights.
control When
on all the K Loxink/substrate
conventional is drawn smoothly
neer ANILOX
GRAVURE
over the substrate
combinations ROLLERS PRINTING
anfor
accurate
colour,film of inkHEAD
printability,is printed producing
adhesion, etc.
RK PrintCoat Instruments Ltd. a sample
Standard
up
K303 Gravure to
ceramic anilox
Ink is transferred
4.5” (115mm)
Proofer
rollers
from
wide.
is engraved
have two engraved
an electronically
After
used inonto removing
laboratories the
bands as
engraved
weights,
listed below.
printing Rollers
plate directly with
theother screens which is
substrate,
Litlington, Royston, Herts. SG8 0QZ, UK both
forrollers
Standard
can
quality are
alsoeasily
attached cleaned.
Design
be supplied.
control to
on the Anilox
Gravure
rubber rollers
impression
all conventional with screens
Plates:
roller.
ink/substrate for
Doctor
Instruments Ltd. solid, line andblade and roller
half-tone adjustments
printing may be are made
selected as required.
Tel: +44 (0)1763 850915 CELLS
combinations Volume
for colour,
pneumatically
CELLS
printability,
allowing adhesion, etc.
repeatable
Volume
settings for
ston, Herts. SG8 0QZ, UK Per linear cm Cm3/m2 Per linear inch Ref
Cbm/inch2 Description
E-mail: simon@rkprint.com Website: www.rkprint.com
future tests.
Engraved roller
763 850915 Standard
400
303/D8W Design Gravure
38 Wedges 150
Plates:
1000 lines/inch 100%
2.0 - 60%